packages/SystemUI/res-keyguard/values/strings.xml

<?xml version="1.0" encoding="utf-8"?>
<!--
/* //device/apps/common/assets/res/any/strings.xml
**
** Copyright 2006, The Android Open Source Project
**
** Licensed under the Apache License, Version 2.0 (the "License");
** you may not use this file except in compliance with the License.
** You may obtain a copy of the License at
**
**     http://www.apache.org/licenses/LICENSE-2.0
**
** Unless required by applicable law or agreed to in writing, software
** distributed under the License is distributed on an "AS IS" BASIS,
** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
** See the License for the specific language governing permissions and
** limitations under the License.
*/
-->
<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">
    <!-- Instructions telling the user to enter their PIN password to unlock the keyguard [CHAR LIMIT=30] -->
    <string name="keyguard_enter_your_pin">Enter your PIN</string>

    <!-- Instructions telling the user to enter their PIN password to unlock the keyguard [CHAR LIMIT=48] -->
    <string name="keyguard_enter_pin">Enter PIN</string>

    <!-- Instructions telling the user to enter their pattern to unlock the keyguard [CHAR LIMIT=30] -->
    <string name="keyguard_enter_your_pattern">Enter your pattern</string>

    <!-- Instructions telling the user to enter their pattern to unlock the keyguard [CHAR LIMIT=48] -->
    <string name="keyguard_enter_pattern">Draw pattern</string>

    <!-- Instructions telling the user to enter their text password to unlock the keyguard [CHAR LIMIT=30] -->
    <string name="keyguard_enter_your_password">Enter your password</string>

    <!-- Instructions telling the user to enter their text password to unlock the keyguard [CHAR LIMIT=48] -->
    <string name="keyguard_enter_password">Enter password</string>

    <!-- Shown in the lock screen when there is SIM card IO error. -->
    <string name="keyguard_sim_error_message_short">Invalid Card.</string>

    <!-- When the lock screen is showing, the phone is plugged in and the battery is fully
         charged, say that it is charged. -->
    <string name="keyguard_charged">Charged</string>

    <!-- When the lock screen is showing and the phone plugged in, and the battery is not fully charged, say that it's wirelessly charging. [CHAR LIMIT=50]  -->
    <string name="keyguard_plugged_in_wireless"><xliff:g id="percentage" example="20%">%s</xliff:g> • Charging wirelessly</string>

    <!-- When the lock screen is showing and the phone plugged in, and the battery is not fully charged, say that it's charging. [CHAR LIMIT=50]  -->
    <string name="keyguard_plugged_in_dock"><xliff:g id="percentage" example="20%">%s</xliff:g> • Charging</string>

    <!-- When the lock screen is showing and the phone plugged in, and the battery
         is not fully charged, say that it's charging.  -->
    <string name="keyguard_plugged_in"><xliff:g id="percentage">%s</xliff:g> • Charging</string>

    <!-- When the lock screen is showing and the phone plugged in, and the battery
         is not fully charged, and it's plugged into a fast charger, say that it's charging fast.  -->
    <string name="keyguard_plugged_in_charging_fast"><xliff:g id="percentage">%s</xliff:g> • Charging rapidly</string>

    <!-- When the lock screen is showing and the phone plugged in, and the battery
         is not fully charged, and it's plugged into a slow charger, say that it's charging slowly.  -->
    <string name="keyguard_plugged_in_charging_slowly"><xliff:g id="percentage">%s</xliff:g> • Charging slowly</string>

    <!-- When the lock screen is showing and the phone plugged in, and the defend mode is triggered, say that charging is temporarily limited.  -->
    <string name="keyguard_plugged_in_charging_limited"><xliff:g id="percentage">%s</xliff:g> • Charging optimized to protect battery</string>

    <!-- When the lock screen is showing and the phone plugged in with incompatible charger. -->
    <string name="keyguard_plugged_in_incompatible_charger"><xliff:g id="percentage">%s</xliff:g> • Issue with charging accessory</string>

    <!-- On the keyguard screen, when pattern lock is disabled, only tell them to press menu to unlock.  This is shown in small font at the bottom. -->
    <string name="keyguard_instructions_when_pattern_disabled">Press Menu to unlock.</string>

    <!-- SIM messages --><skip />
    <!-- When the user inserts a sim card from an unsupported network, it becomes network locked -->
    <string name="keyguard_network_locked_message">Network locked</string>
    <!-- Shown when there is no SIM. -->
    <string name="keyguard_missing_sim_message_short">No SIM</string>
    <!-- Shown to ask the user to add a SIM. -->
    <string name="keyguard_missing_sim_instructions">Add a SIM.</string>
    <!-- Shown to ask the user to add a SIM when sim is missing or not readable. -->
    <string name="keyguard_missing_sim_instructions_long">The SIM is missing or not readable. Add a SIM.</string>
    <!-- Shown when SIM is permanently disabled. -->
    <string name="keyguard_permanent_disabled_sim_message_short">Unusable SIM.</string>
    <!-- Shown to inform the user to SIM is permanently deactivated. -->
    <string name="keyguard_permanent_disabled_sim_instructions">Your SIM has been permanently deactivated.\n
    Contact your wireless service provider for another SIM.</string>
    <!-- Shown to tell the user that their SIM is locked and they must unlock it. -->
    <string name="keyguard_sim_locked_message">SIM is locked.</string>
    <!-- When the user enters a wrong sim pin too many times, it becomes PUK locked (Pin Unlock Kode) -->
    <string name="keyguard_sim_puk_locked_message">SIM is PUK-locked.</string>
    <!-- For the unlock screen, When the user enters a sim unlock code, it takes a little while to check
         whether it is valid, and to unlock the sim if it is valid.  we display a
         progress dialog in the meantime.  this is the emssage. -->
    <string name="keyguard_sim_unlock_progress_dialog_message">Unlocking SIM\u2026</string>
    <!-- Composes together the carrier name and the SIM card locked message. Example: CarrierName (SIM LOCKED) -->
    <string name="keyguard_carrier_name_with_sim_locked_template" translatable="false"><xliff:g id="carrier">%s</xliff:g> (<xliff:g id="message">%s</xliff:g>)</string>

    <!-- Time format strings for fall-back clock widget -->
    <string name="keyguard_widget_12_hours_format" translatable="false">h:mm</string>
    <!-- Time format strings for fall-back clock widget -->
    <string name="keyguard_widget_24_hours_format" translatable="false">kk:mm</string>
    <!-- The character used in keyguard_widget_12_hours_format and keyguard_widget_24_hours_format
         to represent a ":". -->
    <string name="keyguard_fancy_colon" translatable="false"></string>

    <!-- Accessibility description of the PIN password view. [CHAR_LIMIT=none] -->
    <string name="keyguard_accessibility_pin_area">PIN area</string>
    <!-- Accessibility description of the normal password view. [CHAR_LIMIT=none] -->
    <string name="keyguard_accessibility_password">Device password</string>

    <!-- Accessibility description of the SIM PIN password view. [CHAR_LIMIT=none] -->
    <string name="keyguard_accessibility_sim_pin_area">SIM PIN area</string>
    <!-- Accessibility description of the SIM PUK password view. [CHAR_LIMIT=none] -->
    <string name="keyguard_accessibility_sim_puk_area">SIM PUK area</string>

    <!-- KeyguardPinView - accessibility support --><skip />
    <!-- Description of the Delete button in a KeyboardView. [CHAR LIMIT=NONE] -->
    <string name="keyboardview_keycode_delete">Delete</string>
    <!-- Description of the button used to disable current carrier when the device supported embedded SIM. [CHAR LIMIT=30] -->
    <string name="disable_carrier_button_text">Disable eSIM</string>
    <!-- Title of Error message when disabling current carrier failed for the device supported embedded SIM. [CHAR LIMIT=80] -->
    <string name="error_disable_esim_title">Can\u2019t disable eSIM</string>
    <!-- Description of Error message when disabling current carrier failed for the device supported embedded SIM. [CHAR LIMIT=80] -->
    <string name="error_disable_esim_msg">The eSIM can\u2019t be disabled due to an error.</string>
    <!-- Description of the Enter button in a KeyboardView. [CHAR LIMIT=NONE] -->
    <string name="keyboardview_keycode_enter">Enter</string>

    <!-- Message shown when user enters wrong pattern -->
    <string name="kg_wrong_pattern">Wrong pattern</string>

    <!-- Message shown when user enters wrong pattern [CHAR LIMIT=48] -->
    <string name="kg_wrong_pattern_try_again">Wrong pattern. Try again.</string>

    <!-- Message shown when user enters wrong password -->
    <string name="kg_wrong_password">Wrong password</string>

    <!-- Message shown when user enters wrong pattern [CHAR LIMIT=48] -->
    <string name="kg_wrong_password_try_again">Wrong password. Try again.</string>

    <!-- Message shown when user enters wrong PIN -->
    <string name="kg_wrong_pin">Wrong PIN</string>

    <!-- Message shown when user enters wrong PIN  [CHAR LIMIT=48] -->
    <string name="kg_wrong_pin_try_again">Wrong PIN. Try again.</string>

    <!-- Message shown when user enters wrong PIN/password/pattern below the main message, for ex: "Wrong PIN. Try again" in line 1 and the following text in line 2.  [CHAR LIMIT=70] -->
    <string name="kg_wrong_input_try_fp_suggestion">Or unlock with fingerprint</string>

    <!-- Message shown when user fingerprint is not recognized  [CHAR LIMIT=48] -->
    <string name="kg_fp_not_recognized">Fingerprint not recognized</string>

    <!-- Message shown when we want the users to try biometric auth again or use pin/pattern/password  [CHAR LIMIT=48] -->
    <string name="bouncer_face_not_recognized">Face not recognized</string>

    <!-- Message shown when we want the users to try biometric auth again or use pin/pattern/password  [CHAR LIMIT=70] -->
    <string name="kg_bio_try_again_or_pin">Try again or enter PIN</string>

    <!-- Message shown when we want the users to try biometric auth again or use pin/pattern/password  [CHAR LIMIT=70] -->
    <string name="kg_bio_try_again_or_password">Try again or enter password</string>

    <!-- Message shown when we want the users to try biometric auth again or use pin/pattern/password  [CHAR LIMIT=70] -->
    <string name="kg_bio_try_again_or_pattern">Try again or draw pattern</string>

    <!-- Message shown when we are on bouncer after temporary lockout of either face or fingerprint  [CHAR LIMIT=70] -->
    <string name="kg_bio_too_many_attempts_pin">PIN is required after too many attempts</string>

    <!-- Message shown when we are on bouncer after temporary lockout of either face or fingerprint  [CHAR LIMIT=70] -->
    <string name="kg_bio_too_many_attempts_password">Password is required after too many attempts</string>

    <!-- Message shown when we are on bouncer after temporary lockout of either face or fingerprint  [CHAR LIMIT=70] -->
    <string name="kg_bio_too_many_attempts_pattern">Pattern is required after too many attempts</string>

    <!-- Instructions when the user can unlock with PIN/password/pattern or fingerprint from bouncer. [CHAR LIMIT=48]  -->
    <string name="kg_unlock_with_pin_or_fp">Unlock with PIN or fingerprint</string>

    <!-- Instructions when the user can unlock with PIN/password/pattern or fingerprint from bouncer. [CHAR LIMIT=48]  -->
    <string name="kg_unlock_with_password_or_fp">Unlock with password or fingerprint</string>

    <!-- Instructions when the user can unlock with PIN/password/pattern or fingerprint from bouncer. [CHAR LIMIT=48]  -->
    <string name="kg_unlock_with_pattern_or_fp">Unlock with pattern or fingerprint</string>

    <!-- Message shown when we are on bouncer after Device admin requested lockdown.  [CHAR LIMIT=70] -->
    <string name="kg_prompt_after_dpm_lock">For added security, device was locked by work policy</string>

    <!-- Message shown for pin/pattern/password when we are on bouncer after user triggered lockdown.  [CHAR LIMIT=70] -->
    <string name="kg_prompt_after_user_lockdown_pin">PIN is required after lockdown</string>

    <!-- Message shown for pin/pattern/password when we are on bouncer after user triggered lockdown.  [CHAR LIMIT=70] -->
    <string name="kg_prompt_after_user_lockdown_password">Password is required after lockdown</string>

    <!-- Message shown for pin/pattern/password when we are on bouncer after user triggered lockdown.  [CHAR LIMIT=70] -->
    <string name="kg_prompt_after_user_lockdown_pattern">Pattern is required after lockdown</string>

    <!-- Message shown to prepare for an unattended update (OTA). Also known as an over-the-air (OTA) update.  [CHAR LIMIT=70] -->
    <string name="kg_prompt_unattended_update">Update will install during inactive hours</string>

    <!-- Message shown when primary authentication hasn't been used for some time.  [CHAR LIMIT=70] -->
    <string name="kg_prompt_pin_auth_timeout">Added security required. PIN not used for a while.</string>

    <!-- Message shown when primary authentication hasn't been used for some time.  [CHAR LIMIT=70] -->
    <string name="kg_prompt_password_auth_timeout">Added security required. Password not used for a while.</string>

    <!-- Message shown when primary authentication hasn't been used for some time.  [CHAR LIMIT=76] -->
    <string name="kg_prompt_pattern_auth_timeout">Added security required. Pattern not used for a while.</string>

    <!-- Message shown when device hasn't been unlocked for a while.  [CHAR LIMIT=82] -->
    <string name="kg_prompt_auth_timeout">Added security required. Device wasn\u2019t unlocked for a while.</string>

    <!-- Message shown when face unlock is not available after too many failed face authentication attempts.  [CHAR LIMIT=70] -->
    <string name="kg_face_locked_out">Can\u2019t unlock with face. Too many attempts.</string>

    <!-- Message shown when fingerprint unlock isn't available after too many failed fingerprint authentication attempts.  [CHAR LIMIT=75] -->
    <string name="kg_fp_locked_out">Can\u2019t unlock with fingerprint. Too many attempts.</string>

    <!-- Message shown when Trust Agent is disabled.  [CHAR LIMIT=70] -->
    <string name="kg_trust_agent_disabled">Trust agent is unavailable</string>

    <!-- Message shown when primary auth is locked out after too many attempts [CHAR LIMIT=70]  -->
    <string name="kg_primary_auth_locked_out_pin">Too many attempts with incorrect PIN</string>

    <!-- Message shown when primary auth is locked out after too many attempts [CHAR LIMIT=70]  -->
    <string name="kg_primary_auth_locked_out_pattern">Too many attempts with incorrect pattern</string>

    <!-- Message shown when primary auth is locked out after too many attempts [CHAR LIMIT=70]  -->
    <string name="kg_primary_auth_locked_out_password">Too many attempts with incorrect password</string>

    <!-- Countdown message shown after too many failed unlock attempts [CHAR LIMIT=48]-->
    <string name="kg_too_many_failed_attempts_countdown">{count, plural,
        =1 {Try again in # second.}
        other {Try again in # seconds.}
    }
    </string>
    <!-- Instructions for using the SIM PIN unlock screen -->
    <string name="kg_sim_pin_instructions">Enter SIM PIN.</string>
    <!-- Instructions for using the SIM PIN unlock screen when there's more than one SIM -->
    <string name="kg_sim_pin_instructions_multi">Enter SIM PIN for \"<xliff:g id="carrier" example="CARD 1">%1$s</xliff:g>\".</string>
    <!-- Instructions for disabling eSIM carrier to unlock the phone with embedded SIM. This message follows the original SIM PIN/PUK message of device without embedded SIM. -->
    <string name="kg_sim_lock_esim_instructions"><xliff:g id="previous_msg" example="Enter SIM PIN.">%1$s</xliff:g> Disable eSIM to use device without mobile service.</string>
    <!-- Hint shown in the PUK screen that asks the user to enter the PUK code given to them by their provider -->
    <string name="kg_puk_enter_puk_hint">SIM is now disabled. Enter PUK code to continue. Contact carrier for details.</string>
    <!-- Hint shown when there are multiple SIMs in the device to ask the user to enter the PUK code given to them by their provider -->
    <string name="kg_puk_enter_puk_hint_multi">SIM \"<xliff:g id="carrier" example="CARD 1">%1$s</xliff:g>\" is now disabled. Enter PUK code to continue. Contact carrier for details.</string>
    <!-- Hint shown in the PUK unlock screen PIN TextView -->
    <string name="kg_puk_enter_pin_hint">Enter desired PIN code</string>
    <!-- Message shown when the user needs to confirm the PIN they just entered in the PUK screen -->
    <string name="kg_enter_confirm_pin_hint">Confirm desired PIN code</string>
    <!-- Message shown in dialog while the device is unlocking the SIM -->
    <string name="kg_sim_unlock_progress_dialog_message">Unlocking SIM\u2026</string>
    <!-- Message shown when the user enters an invalid SIM pin password in PUK screen -->
    <string name="kg_invalid_sim_pin_hint">Type a PIN that is 4 to 8 numbers.</string>
    <!-- Message shown when the user enters an invalid PUK code in the PUK screen -->
    <string name="kg_invalid_sim_puk_hint">PUK code should be 8 numbers or more.</string>
    <!-- Message shown in dialog when max number of attempts are reached for PIN screen of keyguard -->
    <string name="kg_too_many_failed_pin_attempts_dialog_message">
        You have incorrectly typed your PIN <xliff:g id="number">%1$d</xliff:g> times.
        \n\nTry again in <xliff:g id="number">%2$d</xliff:g> seconds.
    </string>
    <!-- Message shown in dialog when max number of attempts are reached for password screen of keyguard -->
    <string name="kg_too_many_failed_password_attempts_dialog_message">
        You have incorrectly typed your password <xliff:g id="number">%1$d</xliff:g> times.
        \n\nTry again in <xliff:g id="number">%2$d</xliff:g> seconds.
    </string>
    <string name="kg_too_many_failed_pattern_attempts_dialog_message">
        You have incorrectly drawn your unlock pattern <xliff:g id="number">%1$d</xliff:g> times.
        \n\nTry again in <xliff:g id="number">%2$d</xliff:g> seconds.
    </string>

    <!-- Instructions telling the user that they entered the wrong SIM PIN for the last time.
         Displayed in a dialog box.  -->
    <string name="kg_password_wrong_pin_code_pukked">Incorrect SIM PIN code you must now contact your carrier to unlock your device.</string>
    <!-- Instructions telling the user that they entered the wrong SIM PIN while trying
         to unlock the keyguard.  Displayed in a dialog box.  [CHAR LIMIT=NONE] -->
    <string name="kg_password_wrong_pin_code"> {count, plural,
        =1 {Incorrect SIM PIN code, you have # remaining attempt before you must contact your carrier to unlock your device.}
        other {Incorrect SIM PIN code, you have # remaining attempts. }
    }</string>

    <!-- Instructions telling the user that they have exhausted SIM PUK retries and the SIM is now unusable.
         Displayed in a dialog box.  -->
    <string name="kg_password_wrong_puk_code_dead">SIM is unusable. Contact your carrier.</string>
    <!-- Instructions telling the user that they entered the wrong puk while trying
         to unlock the keyguard.  Displayed in a dialog box.  [CHAR LIMIT=NONE] -->
    <string name="kg_password_wrong_puk_code">{count, plural,
        =1 {Incorrect SIM PUK code, you have # remaining attempt before SIM becomes permanently unusable.}
        other {Incorrect SIM PUK code, you have # remaining attempts before SIM becomes permanently unusable.}
    }</string>
    <!-- Instructions telling the user that the operation to unlock the keyguard
         with SIM PIN failed. Displayed in one line in a large font.  -->
    <string name="kg_password_pin_failed">SIM PIN operation failed!</string>
    <!-- Instructions telling the user that the operation to unlock the keyguard
         with PUK failed. Displayed in one line in a large font.  -->
    <string name="kg_password_puk_failed">SIM PUK operation failed!</string>
    <!-- Content description of the switch input method button for accessibility (not shown on the screen). [CHAR LIMIT=NONE] -->
    <string name="accessibility_ime_switch_button" msgid="5032926134740456424">Switch input method</string>

    <!-- Description of airplane mode -->
    <string name="airplane_mode">Airplane mode</string>

    <!-- An explanation text that the pattern needs to be solved since the device has just been restarted. [CHAR LIMIT=70] -->
    <string name="kg_prompt_reason_restart_pattern">Pattern is required after device restarts</string>

    <!-- An explanation text that the pin needs to be entered since the device has just been restarted. [CHAR LIMIT=70] -->
    <string name="kg_prompt_reason_restart_pin">PIN is required after device restarts</string>

    <!-- An explanation text that the password needs to be entered since the device has just been restarted. [CHAR LIMIT=70] -->
    <string name="kg_prompt_reason_restart_password">Password is required after device restarts</string>

    <!-- An explanation text that the pattern needs to be solved since the user hasn't used strong authentication since quite some time. [CHAR LIMIT=80] -->
    <string name="kg_prompt_reason_timeout_pattern">For additional security, use pattern instead</string>

    <!-- An explanation text that the pin needs to be entered since the user hasn't used strong authentication since quite some time. [CHAR LIMIT=80] -->
    <string name="kg_prompt_reason_timeout_pin">For additional security, use PIN instead</string>

    <!-- An explanation text that the password needs to be entered since the user hasn't used strong authentication since quite some time. [CHAR LIMIT=80] -->
    <string name="kg_prompt_reason_timeout_password">For additional security, use password instead</string>

    <!-- An explanation text that the credential needs to be entered because a device admin has
    locked the device. [CHAR LIMIT=80] -->
    <string name="kg_prompt_reason_device_admin">Device locked by admin</string>

    <!-- An explanation text that the credential needs to be entered because the user has clicked
     the force lock button. [CHAR LIMIT=80] -->
    <string name="kg_prompt_reason_user_request">Device was locked manually</string>

    <!-- Face hint message when face was not recognized. [CHAR LIMIT=20] -->
    <string name="kg_face_not_recognized">Not recognized</string>

     <!-- Error message indicating that the camera privacy sensor has been turned on [CHAR LIMIT=53] -->
    <string name="kg_face_sensor_privacy_enabled">To use Face Unlock, turn on camera access in Settings</string>

    <!-- Instructions telling the user remaining times when enter SIM PIN view.  [CHAR LIMIT=NONE] -->
    <string name="kg_password_default_pin_message">{count, plural,
        =1 {Enter SIM PIN. You have # remaining attempt before you must contact your carrier to unlock your device.}
        other {Enter SIM PIN. You have # remaining attempts.}
    }</string>

    <!-- Instructions telling the user remaining times when enter SIM PUK view. [CHAR LIMIT=NONE] -->
    <string name="kg_password_default_puk_message">{count, plural,
        =1 {SIM is now disabled. Enter PUK code to continue. You have # remaining attempt before SIM becomes permanently unusable. Contact carrier for details.}
        other {SIM is now disabled. Enter PUK code to continue. You have # remaining attempts before SIM becomes permanently unusable. Contact carrier for details.}
    }</string>

    <!-- Name of the "Default" clock face, which is the clock face that will be shown by default. [CHAR LIMIT=15]-->
    <string name="clock_title_default">Default</string>
    <!-- Name of the "Bubble" clock face, which is an analog clock with hands shaped like large bubbles [CHAR LIMIT=15]-->
    <string name="clock_title_bubble">Bubble</string>
    <!-- Name of the "Analog" clock face [CHAR LIMIT=15]-->
    <string name="clock_title_analog">Analog</string>
    <!-- Title of bouncer when we want to authenticate before continuing with action. [CHAR LIMIT=NONE] -->
    <string name="keyguard_unlock_to_continue">Unlock your device to continue</string>
</resources>