Cumulative patch from commit 0b08f25445caacb502c394e917a292d7fa595447
0b08f25 wpa_gui: Documentation update
6128a90 hostapd: Add channel 140 to allowed HT40 channel pairs
8ffaafa wpa_cli: Add missing parameters for "set" command completion routine
0fd9d95 wpa_cli: Add completion routine for "get" command
5c6c315 Add IPv4 support function for "get" control interface command
74fa78b Add AVG_BEACON_RSSI to SIGNAL_POLL output
4acdc48 nl80211: Handle NL80211_ATTR_EXT_FEATURES attribute
a0563ac Sync with mac80211-next.git include/uapi/linux/nl80211.h
0f89328 P2P: Move upper layer SD interaction into a separate file
8b94980 FT: Avoid unnecessary allocation for MIC calculation
18da814 The master branch is now used for v2.5 development
bc04db9 Change version information for the 2.4 release
bc1d23a Add ChangeLog entries for v2.4
319d9da Fix bitfield_get_first_zero() to not read beyond buffer
39c3bfc Indicate AP-DISABLED on main AP mode deinit path
f10487e Send CTRL-EVENT-DISCONNECTED on wpa_supplicant AP deinit
Change-Id: I0b8459261265a25fe0edd7b435ede32be3cc6616
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
diff --git a/src/ap/hostapd.c b/src/ap/hostapd.c
index f6019ac..3e4e16b 100644
--- a/src/ap/hostapd.c
+++ b/src/ap/hostapd.c
@@ -1619,6 +1619,7 @@
wpa_printf(MSG_DEBUG, "%s: deinit bss %s", __func__,
hapd->conf->iface);
hostapd_bss_deinit_no_free(hapd);
+ wpa_msg(hapd->msg_ctx, MSG_INFO, AP_EVENT_DISABLED);
hostapd_cleanup(hapd);
}
@@ -1631,6 +1632,8 @@
if (iface == NULL)
return;
+ hostapd_set_state(iface, HAPD_IFACE_DISABLED);
+
#ifdef CONFIG_IEEE80211N
#ifdef NEED_AP_MLME
hostapd_stop_setup_timers(iface);
diff --git a/src/common/hw_features_common.c b/src/common/hw_features_common.c
index e8babb5..309215e 100644
--- a/src/common/hw_features_common.c
+++ b/src/common/hw_features_common.c
@@ -88,8 +88,8 @@
int sec_chan)
{
int ok, j, first;
- int allowed[] = { 36, 44, 52, 60, 100, 108, 116, 124, 132, 149, 157,
- 184, 192 };
+ int allowed[] = { 36, 44, 52, 60, 100, 108, 116, 124, 132, 140,
+ 149, 157, 184, 192 };
size_t k;
if (pri_chan == sec_chan || !sec_chan)
diff --git a/src/common/version.h b/src/common/version.h
index c662270..5ddf617 100644
--- a/src/common/version.h
+++ b/src/common/version.h
@@ -5,6 +5,6 @@
#define VERSION_STR_POSTFIX ""
#endif /* VERSION_STR_POSTFIX */
-#define VERSION_STR "2.4-devel" VERSION_STR_POSTFIX
+#define VERSION_STR "2.5-devel" VERSION_STR_POSTFIX
#endif /* VERSION_H */
diff --git a/src/common/wpa_common.c b/src/common/wpa_common.c
index de81d53..5534eab 100644
--- a/src/common/wpa_common.c
+++ b/src/common/wpa_common.c
@@ -207,8 +207,10 @@
const u8 *rsnie, size_t rsnie_len,
const u8 *ric, size_t ric_len, u8 *mic)
{
- u8 *buf, *pos;
- size_t buf_len;
+ const u8 *addr[9];
+ size_t len[9];
+ size_t i, num_elem = 0;
+ u8 zero_mic[16];
if (kck_len != 16) {
wpa_printf(MSG_WARNING, "FT: Unsupported KCK length %u",
@@ -216,48 +218,58 @@
return -1;
}
- buf_len = 2 * ETH_ALEN + 1 + mdie_len + ftie_len + rsnie_len + ric_len;
- buf = os_malloc(buf_len);
- if (buf == NULL)
- return -1;
+ addr[num_elem] = sta_addr;
+ len[num_elem] = ETH_ALEN;
+ num_elem++;
- pos = buf;
- os_memcpy(pos, sta_addr, ETH_ALEN);
- pos += ETH_ALEN;
- os_memcpy(pos, ap_addr, ETH_ALEN);
- pos += ETH_ALEN;
- *pos++ = transaction_seqnum;
+ addr[num_elem] = ap_addr;
+ len[num_elem] = ETH_ALEN;
+ num_elem++;
+
+ addr[num_elem] = &transaction_seqnum;
+ len[num_elem] = 1;
+ num_elem++;
+
if (rsnie) {
- os_memcpy(pos, rsnie, rsnie_len);
- pos += rsnie_len;
+ addr[num_elem] = rsnie;
+ len[num_elem] = rsnie_len;
+ num_elem++;
}
if (mdie) {
- os_memcpy(pos, mdie, mdie_len);
- pos += mdie_len;
+ addr[num_elem] = mdie;
+ len[num_elem] = mdie_len;
+ num_elem++;
}
if (ftie) {
- struct rsn_ftie *_ftie;
- os_memcpy(pos, ftie, ftie_len);
- if (ftie_len < 2 + sizeof(*_ftie)) {
- os_free(buf);
+ if (ftie_len < 2 + sizeof(struct rsn_ftie))
return -1;
- }
- _ftie = (struct rsn_ftie *) (pos + 2);
- os_memset(_ftie->mic, 0, sizeof(_ftie->mic));
- pos += ftie_len;
+
+ /* IE hdr and mic_control */
+ addr[num_elem] = ftie;
+ len[num_elem] = 2 + 2;
+ num_elem++;
+
+ /* MIC field with all zeros */
+ os_memset(zero_mic, 0, sizeof(zero_mic));
+ addr[num_elem] = zero_mic;
+ len[num_elem] = sizeof(zero_mic);
+ num_elem++;
+
+ /* Rest of FTIE */
+ addr[num_elem] = ftie + 2 + 2 + 16;
+ len[num_elem] = ftie_len - (2 + 2 + 16);
+ num_elem++;
}
if (ric) {
- os_memcpy(pos, ric, ric_len);
- pos += ric_len;
+ addr[num_elem] = ric;
+ len[num_elem] = ric_len;
+ num_elem++;
}
- wpa_hexdump(MSG_MSGDUMP, "FT: MIC data", buf, pos - buf);
- if (omac1_aes_128(kck, buf, pos - buf, mic)) {
- os_free(buf);
+ for (i = 0; i < num_elem; i++)
+ wpa_hexdump(MSG_MSGDUMP, "FT: MIC data", addr[i], len[i]);
+ if (omac1_aes_128_vector(kck, num_elem, addr, len, mic))
return -1;
- }
-
- os_free(buf);
return 0;
}
diff --git a/src/drivers/driver.h b/src/drivers/driver.h
index 03bd1a7..4074b87 100644
--- a/src/drivers/driver.h
+++ b/src/drivers/driver.h
@@ -1477,6 +1477,7 @@
int above_threshold;
int current_signal;
int avg_signal;
+ int avg_beacon_signal;
int current_noise;
int current_txrate;
enum chan_width chanwidth;
diff --git a/src/drivers/driver_nl80211.c b/src/drivers/driver_nl80211.c
index d743868..aaff9ab 100644
--- a/src/drivers/driver_nl80211.c
+++ b/src/drivers/driver_nl80211.c
@@ -1187,6 +1187,7 @@
static struct nla_policy policy[NL80211_STA_INFO_MAX + 1] = {
[NL80211_STA_INFO_SIGNAL] = { .type = NLA_U8 },
[NL80211_STA_INFO_SIGNAL_AVG] = { .type = NLA_U8 },
+ [NL80211_STA_INFO_BEACON_SIGNAL_AVG] = { .type = NLA_U8 },
};
struct nlattr *rinfo[NL80211_RATE_INFO_MAX + 1];
static struct nla_policy rate_policy[NL80211_RATE_INFO_MAX + 1] = {
@@ -1215,6 +1216,13 @@
else
sig_change->avg_signal = 0;
+ if (sinfo[NL80211_STA_INFO_BEACON_SIGNAL_AVG])
+ sig_change->avg_beacon_signal =
+ (s8)
+ nla_get_u8(sinfo[NL80211_STA_INFO_BEACON_SIGNAL_AVG]);
+ else
+ sig_change->avg_beacon_signal = 0;
+
if (sinfo[NL80211_STA_INFO_TX_BITRATE]) {
if (nla_parse_nested(rinfo, NL80211_RATE_INFO_MAX,
sinfo[NL80211_STA_INFO_TX_BITRATE],
diff --git a/src/drivers/driver_nl80211_capa.c b/src/drivers/driver_nl80211_capa.c
index e0d1d23..13c446f 100644
--- a/src/drivers/driver_nl80211_capa.c
+++ b/src/drivers/driver_nl80211_capa.c
@@ -335,6 +335,33 @@
}
+static int ext_feature_isset(const u8 *ext_features, int ext_features_len,
+ enum nl80211_ext_feature_index ftidx)
+{
+ u8 ft_byte;
+
+ if ((int) ftidx / 8 >= ext_features_len)
+ return 0;
+
+ ft_byte = ext_features[ftidx / 8];
+ return (ft_byte & BIT(ftidx % 8)) != 0;
+}
+
+
+static void wiphy_info_ext_feature_flags(struct wiphy_info_data *info,
+ struct nlattr *tb)
+{
+ struct wpa_driver_capa *capa = info->capa;
+
+ if (tb == NULL)
+ return;
+
+ if (ext_feature_isset(nla_data(tb), nla_len(tb),
+ NL80211_EXT_FEATURE_VHT_IBSS))
+ capa->flags |= WPA_DRIVER_FLAGS_VHT_IBSS;
+}
+
+
static void wiphy_info_feature_flags(struct wiphy_info_data *info,
struct nlattr *tb)
{
@@ -509,6 +536,7 @@
info->device_ap_sme = 1;
wiphy_info_feature_flags(info, tb[NL80211_ATTR_FEATURE_FLAGS]);
+ wiphy_info_ext_feature_flags(info, tb[NL80211_ATTR_EXT_FEATURES]);
wiphy_info_probe_resp_offload(capa,
tb[NL80211_ATTR_PROBE_RESP_OFFLOAD]);
diff --git a/src/drivers/nl80211_copy.h b/src/drivers/nl80211_copy.h
index b37bd5a..ae16ba9 100644
--- a/src/drivers/nl80211_copy.h
+++ b/src/drivers/nl80211_copy.h
@@ -25,10 +25,30 @@
*
*/
+/*
+ * This header file defines the userspace API to the wireless stack. Please
+ * be careful not to break things - i.e. don't move anything around or so
+ * unless you can demonstrate that it breaks neither API nor ABI.
+ *
+ * Additions to the API should be accompanied by actual implementations in
+ * an upstream driver, so that example implementations exist in case there
+ * are ever concerns about the precise semantics of the API or changes are
+ * needed, and to ensure that code for dead (no longer implemented) API
+ * can actually be identified and removed.
+ * Nonetheless, semantics should also be documented carefully in this file.
+ */
+
#include <linux/types.h>
#define NL80211_GENL_NAME "nl80211"
+#define NL80211_MULTICAST_GROUP_CONFIG "config"
+#define NL80211_MULTICAST_GROUP_SCAN "scan"
+#define NL80211_MULTICAST_GROUP_REG "regulatory"
+#define NL80211_MULTICAST_GROUP_MLME "mlme"
+#define NL80211_MULTICAST_GROUP_VENDOR "vendor"
+#define NL80211_MULTICAST_GROUP_TESTMODE "testmode"
+
/**
* DOC: Station handling
*
@@ -173,8 +193,8 @@
* %NL80211_ATTR_WIPHY and %NL80211_ATTR_WIPHY_NAME.
*
* @NL80211_CMD_GET_INTERFACE: Request an interface's configuration;
- * either a dump request on a %NL80211_ATTR_WIPHY or a specific get
- * on an %NL80211_ATTR_IFINDEX is supported.
+ * either a dump request for all interfaces or a specific get with a
+ * single %NL80211_ATTR_IFINDEX is supported.
* @NL80211_CMD_SET_INTERFACE: Set type of a virtual interface, requires
* %NL80211_ATTR_IFINDEX and %NL80211_ATTR_IFTYPE.
* @NL80211_CMD_NEW_INTERFACE: Newly created virtual interface or response
@@ -252,7 +272,18 @@
* %NL80211_ATTR_IFINDEX.
*
* @NL80211_CMD_GET_REG: ask the wireless core to send us its currently set
- * regulatory domain.
+ * regulatory domain. If %NL80211_ATTR_WIPHY is specified and the device
+ * has a private regulatory domain, it will be returned. Otherwise, the
+ * global regdomain will be returned.
+ * A device will have a private regulatory domain if it uses the
+ * regulatory_hint() API. Even when a private regdomain is used the channel
+ * information will still be mended according to further hints from
+ * the regulatory core to help with compliance. A dump version of this API
+ * is now available which will returns the global regdomain as well as
+ * all private regdomains of present wiphys (for those that have it).
+ * If a wiphy is self-managed (%NL80211_ATTR_WIPHY_SELF_MANAGED_REG), then
+ * its private regdomain is the only valid one for it. The regulatory
+ * core is not used to help with compliance in this case.
* @NL80211_CMD_SET_REG: Set current regulatory domain. CRDA sends this command
* after being queried by the kernel. CRDA replies by sending a regulatory
* domain structure which consists of %NL80211_ATTR_REG_ALPHA set to our
@@ -306,7 +337,9 @@
* if passed, define which channels should be scanned; if not
* passed, all channels allowed for the current regulatory domain
* are used. Extra IEs can also be passed from the userspace by
- * using the %NL80211_ATTR_IE attribute.
+ * using the %NL80211_ATTR_IE attribute. The first cycle of the
+ * scheduled scan can be delayed by %NL80211_ATTR_SCHED_SCAN_DELAY
+ * is supplied.
* @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan. Returns -ENOENT if
* scheduled scan is not running. The caller may assume that as soon
* as the call returns, it is safe to start a new scheduled scan again.
@@ -774,6 +807,10 @@
* peer given by %NL80211_ATTR_MAC. Both peers must be on the base channel
* when this command completes.
*
+ * @NL80211_CMD_WIPHY_REG_CHANGE: Similar to %NL80211_CMD_REG_CHANGE, but used
+ * as an event to indicate changes for devices with wiphy-specific regdom
+ * management.
+ *
* @NL80211_CMD_MAX: highest used command number
* @__NL80211_CMD_AFTER_LAST: internal use
*/
@@ -958,6 +995,8 @@
NL80211_CMD_TDLS_CHANNEL_SWITCH,
NL80211_CMD_TDLS_CANCEL_CHANNEL_SWITCH,
+ NL80211_CMD_WIPHY_REG_CHANGE,
+
/* add new commands above here */
/* used to define NL80211_CMD_MAX below */
@@ -1655,6 +1694,13 @@
* @NL80211_ATTR_SOCKET_OWNER: Flag attribute, if set during interface
* creation then the new interface will be owned by the netlink socket
* that created it and will be destroyed when the socket is closed.
+ * If set during scheduled scan start then the new scan req will be
+ * owned by the netlink socket that created it and the scheduled scan will
+ * be stopped when the socket is closed.
+ * If set during configuration of regulatory indoor operation then the
+ * regulatory indoor configuration would be owned by the netlink socket
+ * that configured the indoor setting, and the indoor operation would be
+ * cleared when the socket is closed.
*
* @NL80211_ATTR_TDLS_INITIATOR: flag attribute indicating the current end is
* the TDLS link initiator.
@@ -1688,6 +1734,32 @@
*
* @NL80211_ATTR_MAC_MASK: MAC address mask
*
+ * @NL80211_ATTR_WIPHY_SELF_MANAGED_REG: flag attribute indicating this device
+ * is self-managing its regulatory information and any regulatory domain
+ * obtained from it is coming from the device's wiphy and not the global
+ * cfg80211 regdomain.
+ *
+ * @NL80211_ATTR_EXT_FEATURES: extended feature flags contained in a byte
+ * array. The feature flags are identified by their bit index (see &enum
+ * nl80211_ext_feature_index). The bit index is ordered starting at the
+ * least-significant bit of the first byte in the array, ie. bit index 0
+ * is located at bit 0 of byte 0. bit index 25 would be located at bit 1
+ * of byte 3 (u8 array).
+ *
+ * @NL80211_ATTR_SURVEY_RADIO_STATS: Request overall radio statistics to be
+ * returned along with other survey data. If set, @NL80211_CMD_GET_SURVEY
+ * may return a survey entry without a channel indicating global radio
+ * statistics (only some values are valid and make sense.)
+ * For devices that don't return such an entry even then, the information
+ * should be contained in the result as the sum of the respective counters
+ * over all channels.
+ *
+ * @NL80211_ATTR_SCHED_SCAN_DELAY: delay before a scheduled scan (or a
+ * WoWLAN net-detect scan) is started, u32 in seconds.
+
+ * @NL80211_ATTR_REG_INDOOR: flag attribute, if set indicates that the device
+ * is operating in an indoor environment.
+ *
* @NUM_NL80211_ATTR: total number of nl80211_attrs available
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
@@ -2045,6 +2117,18 @@
NL80211_ATTR_MAC_MASK,
+ NL80211_ATTR_WIPHY_SELF_MANAGED_REG,
+
+ NL80211_ATTR_EXT_FEATURES,
+
+ NL80211_ATTR_SURVEY_RADIO_STATS,
+
+ NL80211_ATTR_NETNS_FD,
+
+ NL80211_ATTR_SCHED_SCAN_DELAY,
+
+ NL80211_ATTR_REG_INDOOR,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
@@ -2085,7 +2169,7 @@
#define NL80211_MAX_SUPP_RATES 32
#define NL80211_MAX_SUPP_HT_RATES 77
-#define NL80211_MAX_SUPP_REG_RULES 32
+#define NL80211_MAX_SUPP_REG_RULES 64
#define NL80211_TKIP_DATA_OFFSET_ENCR_KEY 0
#define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY 16
#define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY 24
@@ -2225,8 +2309,15 @@
* @NL80211_RATE_INFO_VHT_MCS: MCS index for VHT (u8)
* @NL80211_RATE_INFO_VHT_NSS: number of streams in VHT (u8)
* @NL80211_RATE_INFO_80_MHZ_WIDTH: 80 MHz VHT rate
- * @NL80211_RATE_INFO_80P80_MHZ_WIDTH: 80+80 MHz VHT rate
+ * @NL80211_RATE_INFO_80P80_MHZ_WIDTH: unused - 80+80 is treated the
+ * same as 160 for purposes of the bitrates
* @NL80211_RATE_INFO_160_MHZ_WIDTH: 160 MHz VHT rate
+ * @NL80211_RATE_INFO_10_MHZ_WIDTH: 10 MHz width - note that this is
+ * a legacy rate and will be reported as the actual bitrate, i.e.
+ * half the base (20 MHz) rate
+ * @NL80211_RATE_INFO_5_MHZ_WIDTH: 5 MHz width - note that this is
+ * a legacy rate and will be reported as the actual bitrate, i.e.
+ * a quarter of the base (20 MHz) rate
* @__NL80211_RATE_INFO_AFTER_LAST: internal use
*/
enum nl80211_rate_info {
@@ -2241,6 +2332,8 @@
NL80211_RATE_INFO_80_MHZ_WIDTH,
NL80211_RATE_INFO_80P80_MHZ_WIDTH,
NL80211_RATE_INFO_160_MHZ_WIDTH,
+ NL80211_RATE_INFO_10_MHZ_WIDTH,
+ NL80211_RATE_INFO_5_MHZ_WIDTH,
/* keep last */
__NL80211_RATE_INFO_AFTER_LAST,
@@ -2285,18 +2378,24 @@
*
* @__NL80211_STA_INFO_INVALID: attribute number 0 is reserved
* @NL80211_STA_INFO_INACTIVE_TIME: time since last activity (u32, msecs)
- * @NL80211_STA_INFO_RX_BYTES: total received bytes (u32, from this station)
- * @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (u32, to this station)
- * @NL80211_STA_INFO_RX_BYTES64: total received bytes (u64, from this station)
- * @NL80211_STA_INFO_TX_BYTES64: total transmitted bytes (u64, to this station)
+ * @NL80211_STA_INFO_RX_BYTES: total received bytes (MPDU length)
+ * (u32, from this station)
+ * @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (MPDU length)
+ * (u32, to this station)
+ * @NL80211_STA_INFO_RX_BYTES64: total received bytes (MPDU length)
+ * (u64, from this station)
+ * @NL80211_STA_INFO_TX_BYTES64: total transmitted bytes (MPDU length)
+ * (u64, to this station)
* @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm)
* @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute
* containing info as possible, see &enum nl80211_rate_info
- * @NL80211_STA_INFO_RX_PACKETS: total received packet (u32, from this station)
- * @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (u32, to this
- * station)
- * @NL80211_STA_INFO_TX_RETRIES: total retries (u32, to this station)
- * @NL80211_STA_INFO_TX_FAILED: total failed packets (u32, to this station)
+ * @NL80211_STA_INFO_RX_PACKETS: total received packet (MSDUs and MMPDUs)
+ * (u32, from this station)
+ * @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (MSDUs and MMPDUs)
+ * (u32, to this station)
+ * @NL80211_STA_INFO_TX_RETRIES: total retries (MPDUs) (u32, to this station)
+ * @NL80211_STA_INFO_TX_FAILED: total failed packets (MPDUs)
+ * (u32, to this station)
* @NL80211_STA_INFO_SIGNAL_AVG: signal strength average (u8, dBm)
* @NL80211_STA_INFO_LLID: the station's mesh LLID
* @NL80211_STA_INFO_PLID: the station's mesh PLID
@@ -2320,6 +2419,16 @@
* Same format as NL80211_STA_INFO_CHAIN_SIGNAL.
* @NL80211_STA_EXPECTED_THROUGHPUT: expected throughput considering also the
* 802.11 header (u32, kbps)
+ * @NL80211_STA_INFO_RX_DROP_MISC: RX packets dropped for unspecified reasons
+ * (u64)
+ * @NL80211_STA_INFO_BEACON_RX: number of beacons received from this peer (u64)
+ * @NL80211_STA_INFO_BEACON_SIGNAL_AVG: signal strength average
+ * for beacons only (u8, dBm)
+ * @NL80211_STA_INFO_TID_STATS: per-TID statistics (see &enum nl80211_tid_stats)
+ * This is a nested attribute where each the inner attribute number is the
+ * TID+1 and the special TID 16 (i.e. value 17) is used for non-QoS frames;
+ * each one of those is again nested with &enum nl80211_tid_stats
+ * attributes carrying the actual values.
* @__NL80211_STA_INFO_AFTER_LAST: internal
* @NL80211_STA_INFO_MAX: highest possible station info attribute
*/
@@ -2352,6 +2461,10 @@
NL80211_STA_INFO_CHAIN_SIGNAL,
NL80211_STA_INFO_CHAIN_SIGNAL_AVG,
NL80211_STA_INFO_EXPECTED_THROUGHPUT,
+ NL80211_STA_INFO_RX_DROP_MISC,
+ NL80211_STA_INFO_BEACON_RX,
+ NL80211_STA_INFO_BEACON_SIGNAL_AVG,
+ NL80211_STA_INFO_TID_STATS,
/* keep last */
__NL80211_STA_INFO_AFTER_LAST,
@@ -2359,6 +2472,31 @@
};
/**
+ * enum nl80211_tid_stats - per TID statistics attributes
+ * @__NL80211_TID_STATS_INVALID: attribute number 0 is reserved
+ * @NL80211_TID_STATS_RX_MSDU: number of MSDUs received (u64)
+ * @NL80211_TID_STATS_TX_MSDU: number of MSDUs transmitted (or
+ * attempted to transmit; u64)
+ * @NL80211_TID_STATS_TX_MSDU_RETRIES: number of retries for
+ * transmitted MSDUs (not counting the first attempt; u64)
+ * @NL80211_TID_STATS_TX_MSDU_FAILED: number of failed transmitted
+ * MSDUs (u64)
+ * @NUM_NL80211_TID_STATS: number of attributes here
+ * @NL80211_TID_STATS_MAX: highest numbered attribute here
+ */
+enum nl80211_tid_stats {
+ __NL80211_TID_STATS_INVALID,
+ NL80211_TID_STATS_RX_MSDU,
+ NL80211_TID_STATS_TX_MSDU,
+ NL80211_TID_STATS_TX_MSDU_RETRIES,
+ NL80211_TID_STATS_TX_MSDU_FAILED,
+
+ /* keep last */
+ NUM_NL80211_TID_STATS,
+ NL80211_TID_STATS_MAX = NUM_NL80211_TID_STATS - 1
+};
+
+/**
* enum nl80211_mpath_flags - nl80211 mesh path flags
*
* @NL80211_MPATH_FLAG_ACTIVE: the mesh path is active
@@ -2772,16 +2910,18 @@
* @NL80211_SURVEY_INFO_FREQUENCY: center frequency of channel
* @NL80211_SURVEY_INFO_NOISE: noise level of channel (u8, dBm)
* @NL80211_SURVEY_INFO_IN_USE: channel is currently being used
- * @NL80211_SURVEY_INFO_CHANNEL_TIME: amount of time (in ms) that the radio
- * spent on this channel
- * @NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY: amount of the time the primary
+ * @NL80211_SURVEY_INFO_TIME: amount of time (in ms) that the radio
+ * was turned on (on channel or globally)
+ * @NL80211_SURVEY_INFO_TIME_BUSY: amount of the time the primary
* channel was sensed busy (either due to activity or energy detect)
- * @NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY: amount of time the extension
+ * @NL80211_SURVEY_INFO_TIME_EXT_BUSY: amount of time the extension
* channel was sensed busy
- * @NL80211_SURVEY_INFO_CHANNEL_TIME_RX: amount of time the radio spent
- * receiving data
- * @NL80211_SURVEY_INFO_CHANNEL_TIME_TX: amount of time the radio spent
- * transmitting data
+ * @NL80211_SURVEY_INFO_TIME_RX: amount of time the radio spent
+ * receiving data (on channel or globally)
+ * @NL80211_SURVEY_INFO_TIME_TX: amount of time the radio spent
+ * transmitting data (on channel or globally)
+ * @NL80211_SURVEY_INFO_TIME_SCAN: time the radio spent for scan
+ * (on this channel or globally)
* @NL80211_SURVEY_INFO_MAX: highest survey info attribute number
* currently defined
* @__NL80211_SURVEY_INFO_AFTER_LAST: internal use
@@ -2791,17 +2931,25 @@
NL80211_SURVEY_INFO_FREQUENCY,
NL80211_SURVEY_INFO_NOISE,
NL80211_SURVEY_INFO_IN_USE,
- NL80211_SURVEY_INFO_CHANNEL_TIME,
- NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY,
- NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY,
- NL80211_SURVEY_INFO_CHANNEL_TIME_RX,
- NL80211_SURVEY_INFO_CHANNEL_TIME_TX,
+ NL80211_SURVEY_INFO_TIME,
+ NL80211_SURVEY_INFO_TIME_BUSY,
+ NL80211_SURVEY_INFO_TIME_EXT_BUSY,
+ NL80211_SURVEY_INFO_TIME_RX,
+ NL80211_SURVEY_INFO_TIME_TX,
+ NL80211_SURVEY_INFO_TIME_SCAN,
/* keep last */
__NL80211_SURVEY_INFO_AFTER_LAST,
NL80211_SURVEY_INFO_MAX = __NL80211_SURVEY_INFO_AFTER_LAST - 1
};
+/* keep old names for compatibility */
+#define NL80211_SURVEY_INFO_CHANNEL_TIME NL80211_SURVEY_INFO_TIME
+#define NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY NL80211_SURVEY_INFO_TIME_BUSY
+#define NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY NL80211_SURVEY_INFO_TIME_EXT_BUSY
+#define NL80211_SURVEY_INFO_CHANNEL_TIME_RX NL80211_SURVEY_INFO_TIME_RX
+#define NL80211_SURVEY_INFO_CHANNEL_TIME_TX NL80211_SURVEY_INFO_TIME_TX
+
/**
* enum nl80211_mntr_flags - monitor configuration flags
*
@@ -2966,7 +3114,8 @@
*
* @NL80211_MESHCONF_PLINK_TIMEOUT: If no tx activity is seen from a STA we've
* established peering with for longer than this time (in seconds), then
- * remove it from the STA's list of peers. Default is 30 minutes.
+ * remove it from the STA's list of peers. You may set this to 0 to disable
+ * the removal of the STA. Default is 30 minutes.
*
* @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use
*/
@@ -3238,6 +3387,9 @@
/**
* enum nl80211_bss_status - BSS "status"
* @NL80211_BSS_STATUS_AUTHENTICATED: Authenticated with this BSS.
+ * Note that this is no longer used since cfg80211 no longer
+ * keeps track of whether or not authentication was done with
+ * a given BSS.
* @NL80211_BSS_STATUS_ASSOCIATED: Associated with this BSS.
* @NL80211_BSS_STATUS_IBSS_JOINED: Joined to this IBSS.
*
@@ -3565,6 +3717,8 @@
* @NL80211_WOWLAN_TRIG_ANY: wake up on any activity, do not really put
* the chip into a special state -- works best with chips that have
* support for low-power operation already (flag)
+ * Note that this mode is incompatible with all of the others, if
+ * any others are even supported by the device.
* @NL80211_WOWLAN_TRIG_DISCONNECT: wake up on disconnect, the way disconnect
* is detected is implementation-specific (flag)
* @NL80211_WOWLAN_TRIG_MAGIC_PKT: wake up on magic packet (6x 0xff, followed
@@ -3621,9 +3775,12 @@
* @NL80211_WOWLAN_TRIG_NET_DETECT: wake up when a configured network
* is detected. This is a nested attribute that contains the
* same attributes used with @NL80211_CMD_START_SCHED_SCAN. It
- * specifies how the scan is performed (e.g. the interval and the
- * channels to scan) as well as the scan results that will
- * trigger a wake (i.e. the matchsets).
+ * specifies how the scan is performed (e.g. the interval, the
+ * channels to scan and the initial delay) as well as the scan
+ * results that will trigger a wake (i.e. the matchsets). This
+ * attribute is also sent in a response to
+ * @NL80211_CMD_GET_WIPHY, indicating the number of match sets
+ * supported by the driver (u32).
* @NL80211_WOWLAN_TRIG_NET_DETECT_RESULTS: nested attribute
* containing an array with information about what triggered the
* wake up. If no elements are present in the array, it means
@@ -4194,6 +4351,21 @@
};
/**
+ * enum nl80211_ext_feature_index - bit index of extended features.
+ * @NL80211_EXT_FEATURE_VHT_IBSS: This driver supports IBSS with VHT datarates.
+ *
+ * @NUM_NL80211_EXT_FEATURES: number of extended features.
+ * @MAX_NL80211_EXT_FEATURES: highest extended feature index.
+ */
+enum nl80211_ext_feature_index {
+ NL80211_EXT_FEATURE_VHT_IBSS,
+
+ /* add new features before the definition below */
+ NUM_NL80211_EXT_FEATURES,
+ MAX_NL80211_EXT_FEATURES = NUM_NL80211_EXT_FEATURES - 1
+};
+
+/**
* enum nl80211_probe_resp_offload_support_attr - optional supported
* protocols for probe-response offloading by the driver/FW.
* To be used with the %NL80211_ATTR_PROBE_RESP_OFFLOAD attribute.
diff --git a/src/utils/bitfield.c b/src/utils/bitfield.c
index f90e4be..8dcec39 100644
--- a/src/utils/bitfield.c
+++ b/src/utils/bitfield.c
@@ -76,11 +76,11 @@
int bitfield_get_first_zero(struct bitfield *bf)
{
size_t i;
- for (i = 0; i <= (bf->max_bits + 7) / 8; i++) {
+ for (i = 0; i < (bf->max_bits + 7) / 8; i++) {
if (bf->bits[i] != 0xff)
break;
}
- if (i > (bf->max_bits + 7) / 8)
+ if (i == (bf->max_bits + 7) / 8)
return -1;
i = i * 8 + first_zero(bf->bits[i]);
if (i >= bf->max_bits)