diff --git a/src/ap/hostapd.c b/src/ap/hostapd.c
index f6019ac..3e4e16b 100644
--- a/src/ap/hostapd.c
+++ b/src/ap/hostapd.c
@@ -1619,6 +1619,7 @@
 	wpa_printf(MSG_DEBUG, "%s: deinit bss %s", __func__,
 		   hapd->conf->iface);
 	hostapd_bss_deinit_no_free(hapd);
+	wpa_msg(hapd->msg_ctx, MSG_INFO, AP_EVENT_DISABLED);
 	hostapd_cleanup(hapd);
 }
 
@@ -1631,6 +1632,8 @@
 	if (iface == NULL)
 		return;
 
+	hostapd_set_state(iface, HAPD_IFACE_DISABLED);
+
 #ifdef CONFIG_IEEE80211N
 #ifdef NEED_AP_MLME
 	hostapd_stop_setup_timers(iface);
diff --git a/src/common/hw_features_common.c b/src/common/hw_features_common.c
index e8babb5..309215e 100644
--- a/src/common/hw_features_common.c
+++ b/src/common/hw_features_common.c
@@ -88,8 +88,8 @@
 			      int sec_chan)
 {
 	int ok, j, first;
-	int allowed[] = { 36, 44, 52, 60, 100, 108, 116, 124, 132, 149, 157,
-			  184, 192 };
+	int allowed[] = { 36, 44, 52, 60, 100, 108, 116, 124, 132, 140,
+			  149, 157, 184, 192 };
 	size_t k;
 
 	if (pri_chan == sec_chan || !sec_chan)
diff --git a/src/common/version.h b/src/common/version.h
index c662270..5ddf617 100644
--- a/src/common/version.h
+++ b/src/common/version.h
@@ -5,6 +5,6 @@
 #define VERSION_STR_POSTFIX ""
 #endif /* VERSION_STR_POSTFIX */
 
-#define VERSION_STR "2.4-devel" VERSION_STR_POSTFIX
+#define VERSION_STR "2.5-devel" VERSION_STR_POSTFIX
 
 #endif /* VERSION_H */
diff --git a/src/common/wpa_common.c b/src/common/wpa_common.c
index de81d53..5534eab 100644
--- a/src/common/wpa_common.c
+++ b/src/common/wpa_common.c
@@ -207,8 +207,10 @@
 	       const u8 *rsnie, size_t rsnie_len,
 	       const u8 *ric, size_t ric_len, u8 *mic)
 {
-	u8 *buf, *pos;
-	size_t buf_len;
+	const u8 *addr[9];
+	size_t len[9];
+	size_t i, num_elem = 0;
+	u8 zero_mic[16];
 
 	if (kck_len != 16) {
 		wpa_printf(MSG_WARNING, "FT: Unsupported KCK length %u",
@@ -216,48 +218,58 @@
 		return -1;
 	}
 
-	buf_len = 2 * ETH_ALEN + 1 + mdie_len + ftie_len + rsnie_len + ric_len;
-	buf = os_malloc(buf_len);
-	if (buf == NULL)
-		return -1;
+	addr[num_elem] = sta_addr;
+	len[num_elem] = ETH_ALEN;
+	num_elem++;
 
-	pos = buf;
-	os_memcpy(pos, sta_addr, ETH_ALEN);
-	pos += ETH_ALEN;
-	os_memcpy(pos, ap_addr, ETH_ALEN);
-	pos += ETH_ALEN;
-	*pos++ = transaction_seqnum;
+	addr[num_elem] = ap_addr;
+	len[num_elem] = ETH_ALEN;
+	num_elem++;
+
+	addr[num_elem] = &transaction_seqnum;
+	len[num_elem] = 1;
+	num_elem++;
+
 	if (rsnie) {
-		os_memcpy(pos, rsnie, rsnie_len);
-		pos += rsnie_len;
+		addr[num_elem] = rsnie;
+		len[num_elem] = rsnie_len;
+		num_elem++;
 	}
 	if (mdie) {
-		os_memcpy(pos, mdie, mdie_len);
-		pos += mdie_len;
+		addr[num_elem] = mdie;
+		len[num_elem] = mdie_len;
+		num_elem++;
 	}
 	if (ftie) {
-		struct rsn_ftie *_ftie;
-		os_memcpy(pos, ftie, ftie_len);
-		if (ftie_len < 2 + sizeof(*_ftie)) {
-			os_free(buf);
+		if (ftie_len < 2 + sizeof(struct rsn_ftie))
 			return -1;
-		}
-		_ftie = (struct rsn_ftie *) (pos + 2);
-		os_memset(_ftie->mic, 0, sizeof(_ftie->mic));
-		pos += ftie_len;
+
+		/* IE hdr and mic_control */
+		addr[num_elem] = ftie;
+		len[num_elem] = 2 + 2;
+		num_elem++;
+
+		/* MIC field with all zeros */
+		os_memset(zero_mic, 0, sizeof(zero_mic));
+		addr[num_elem] = zero_mic;
+		len[num_elem] = sizeof(zero_mic);
+		num_elem++;
+
+		/* Rest of FTIE */
+		addr[num_elem] = ftie + 2 + 2 + 16;
+		len[num_elem] = ftie_len - (2 + 2 + 16);
+		num_elem++;
 	}
 	if (ric) {
-		os_memcpy(pos, ric, ric_len);
-		pos += ric_len;
+		addr[num_elem] = ric;
+		len[num_elem] = ric_len;
+		num_elem++;
 	}
 
-	wpa_hexdump(MSG_MSGDUMP, "FT: MIC data", buf, pos - buf);
-	if (omac1_aes_128(kck, buf, pos - buf, mic)) {
-		os_free(buf);
+	for (i = 0; i < num_elem; i++)
+		wpa_hexdump(MSG_MSGDUMP, "FT: MIC data", addr[i], len[i]);
+	if (omac1_aes_128_vector(kck, num_elem, addr, len, mic))
 		return -1;
-	}
-
-	os_free(buf);
 
 	return 0;
 }
diff --git a/src/drivers/driver.h b/src/drivers/driver.h
index 03bd1a7..4074b87 100644
--- a/src/drivers/driver.h
+++ b/src/drivers/driver.h
@@ -1477,6 +1477,7 @@
 	int above_threshold;
 	int current_signal;
 	int avg_signal;
+	int avg_beacon_signal;
 	int current_noise;
 	int current_txrate;
 	enum chan_width chanwidth;
diff --git a/src/drivers/driver_nl80211.c b/src/drivers/driver_nl80211.c
index d743868..aaff9ab 100644
--- a/src/drivers/driver_nl80211.c
+++ b/src/drivers/driver_nl80211.c
@@ -1187,6 +1187,7 @@
 	static struct nla_policy policy[NL80211_STA_INFO_MAX + 1] = {
 		[NL80211_STA_INFO_SIGNAL] = { .type = NLA_U8 },
 		[NL80211_STA_INFO_SIGNAL_AVG] = { .type = NLA_U8 },
+		[NL80211_STA_INFO_BEACON_SIGNAL_AVG] = { .type = NLA_U8 },
 	};
 	struct nlattr *rinfo[NL80211_RATE_INFO_MAX + 1];
 	static struct nla_policy rate_policy[NL80211_RATE_INFO_MAX + 1] = {
@@ -1215,6 +1216,13 @@
 	else
 		sig_change->avg_signal = 0;
 
+	if (sinfo[NL80211_STA_INFO_BEACON_SIGNAL_AVG])
+		sig_change->avg_beacon_signal =
+			(s8)
+			nla_get_u8(sinfo[NL80211_STA_INFO_BEACON_SIGNAL_AVG]);
+	else
+		sig_change->avg_beacon_signal = 0;
+
 	if (sinfo[NL80211_STA_INFO_TX_BITRATE]) {
 		if (nla_parse_nested(rinfo, NL80211_RATE_INFO_MAX,
 				     sinfo[NL80211_STA_INFO_TX_BITRATE],
diff --git a/src/drivers/driver_nl80211_capa.c b/src/drivers/driver_nl80211_capa.c
index e0d1d23..13c446f 100644
--- a/src/drivers/driver_nl80211_capa.c
+++ b/src/drivers/driver_nl80211_capa.c
@@ -335,6 +335,33 @@
 }
 
 
+static int ext_feature_isset(const u8 *ext_features, int ext_features_len,
+			     enum nl80211_ext_feature_index ftidx)
+{
+	u8 ft_byte;
+
+	if ((int) ftidx / 8 >= ext_features_len)
+		return 0;
+
+	ft_byte = ext_features[ftidx / 8];
+	return (ft_byte & BIT(ftidx % 8)) != 0;
+}
+
+
+static void wiphy_info_ext_feature_flags(struct wiphy_info_data *info,
+					 struct nlattr *tb)
+{
+	struct wpa_driver_capa *capa = info->capa;
+
+	if (tb == NULL)
+		return;
+
+	if (ext_feature_isset(nla_data(tb), nla_len(tb),
+			      NL80211_EXT_FEATURE_VHT_IBSS))
+		capa->flags |= WPA_DRIVER_FLAGS_VHT_IBSS;
+}
+
+
 static void wiphy_info_feature_flags(struct wiphy_info_data *info,
 				     struct nlattr *tb)
 {
@@ -509,6 +536,7 @@
 		info->device_ap_sme = 1;
 
 	wiphy_info_feature_flags(info, tb[NL80211_ATTR_FEATURE_FLAGS]);
+	wiphy_info_ext_feature_flags(info, tb[NL80211_ATTR_EXT_FEATURES]);
 	wiphy_info_probe_resp_offload(capa,
 				      tb[NL80211_ATTR_PROBE_RESP_OFFLOAD]);
 
diff --git a/src/drivers/nl80211_copy.h b/src/drivers/nl80211_copy.h
index b37bd5a..ae16ba9 100644
--- a/src/drivers/nl80211_copy.h
+++ b/src/drivers/nl80211_copy.h
@@ -25,10 +25,30 @@
  *
  */
 
+/*
+ * This header file defines the userspace API to the wireless stack. Please
+ * be careful not to break things - i.e. don't move anything around or so
+ * unless you can demonstrate that it breaks neither API nor ABI.
+ *
+ * Additions to the API should be accompanied by actual implementations in
+ * an upstream driver, so that example implementations exist in case there
+ * are ever concerns about the precise semantics of the API or changes are
+ * needed, and to ensure that code for dead (no longer implemented) API
+ * can actually be identified and removed.
+ * Nonetheless, semantics should also be documented carefully in this file.
+ */
+
 #include <linux/types.h>
 
 #define NL80211_GENL_NAME "nl80211"
 
+#define NL80211_MULTICAST_GROUP_CONFIG		"config"
+#define NL80211_MULTICAST_GROUP_SCAN		"scan"
+#define NL80211_MULTICAST_GROUP_REG		"regulatory"
+#define NL80211_MULTICAST_GROUP_MLME		"mlme"
+#define NL80211_MULTICAST_GROUP_VENDOR		"vendor"
+#define NL80211_MULTICAST_GROUP_TESTMODE	"testmode"
+
 /**
  * DOC: Station handling
  *
@@ -173,8 +193,8 @@
  *	%NL80211_ATTR_WIPHY and %NL80211_ATTR_WIPHY_NAME.
  *
  * @NL80211_CMD_GET_INTERFACE: Request an interface's configuration;
- *	either a dump request on a %NL80211_ATTR_WIPHY or a specific get
- *	on an %NL80211_ATTR_IFINDEX is supported.
+ *	either a dump request for all interfaces or a specific get with a
+ *	single %NL80211_ATTR_IFINDEX is supported.
  * @NL80211_CMD_SET_INTERFACE: Set type of a virtual interface, requires
  *	%NL80211_ATTR_IFINDEX and %NL80211_ATTR_IFTYPE.
  * @NL80211_CMD_NEW_INTERFACE: Newly created virtual interface or response
@@ -252,7 +272,18 @@
  *	%NL80211_ATTR_IFINDEX.
  *
  * @NL80211_CMD_GET_REG: ask the wireless core to send us its currently set
- * 	regulatory domain.
+ *	regulatory domain. If %NL80211_ATTR_WIPHY is specified and the device
+ *	has a private regulatory domain, it will be returned. Otherwise, the
+ *	global regdomain will be returned.
+ *	A device will have a private regulatory domain if it uses the
+ *	regulatory_hint() API. Even when a private regdomain is used the channel
+ *	information will still be mended according to further hints from
+ *	the regulatory core to help with compliance. A dump version of this API
+ *	is now available which will returns the global regdomain as well as
+ *	all private regdomains of present wiphys (for those that have it).
+ *	If a wiphy is self-managed (%NL80211_ATTR_WIPHY_SELF_MANAGED_REG), then
+ *	its private regdomain is the only valid one for it. The regulatory
+ *	core is not used to help with compliance in this case.
  * @NL80211_CMD_SET_REG: Set current regulatory domain. CRDA sends this command
  *	after being queried by the kernel. CRDA replies by sending a regulatory
  *	domain structure which consists of %NL80211_ATTR_REG_ALPHA set to our
@@ -306,7 +337,9 @@
  *	if passed, define which channels should be scanned; if not
  *	passed, all channels allowed for the current regulatory domain
  *	are used.  Extra IEs can also be passed from the userspace by
- *	using the %NL80211_ATTR_IE attribute.
+ *	using the %NL80211_ATTR_IE attribute.  The first cycle of the
+ *	scheduled scan can be delayed by %NL80211_ATTR_SCHED_SCAN_DELAY
+ *	is supplied.
  * @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan. Returns -ENOENT if
  *	scheduled scan is not running. The caller may assume that as soon
  *	as the call returns, it is safe to start a new scheduled scan again.
@@ -774,6 +807,10 @@
  *	peer given by %NL80211_ATTR_MAC. Both peers must be on the base channel
  *	when this command completes.
  *
+ * @NL80211_CMD_WIPHY_REG_CHANGE: Similar to %NL80211_CMD_REG_CHANGE, but used
+ *	as an event to indicate changes for devices with wiphy-specific regdom
+ *	management.
+ *
  * @NL80211_CMD_MAX: highest used command number
  * @__NL80211_CMD_AFTER_LAST: internal use
  */
@@ -958,6 +995,8 @@
 	NL80211_CMD_TDLS_CHANNEL_SWITCH,
 	NL80211_CMD_TDLS_CANCEL_CHANNEL_SWITCH,
 
+	NL80211_CMD_WIPHY_REG_CHANGE,
+
 	/* add new commands above here */
 
 	/* used to define NL80211_CMD_MAX below */
@@ -1655,6 +1694,13 @@
  * @NL80211_ATTR_SOCKET_OWNER: Flag attribute, if set during interface
  *	creation then the new interface will be owned by the netlink socket
  *	that created it and will be destroyed when the socket is closed.
+ *	If set during scheduled scan start then the new scan req will be
+ *	owned by the netlink socket that created it and the scheduled scan will
+ *	be stopped when the socket is closed.
+ *	If set during configuration of regulatory indoor operation then the
+ *	regulatory indoor configuration would be owned by the netlink socket
+ *	that configured the indoor setting, and the indoor operation would be
+ *	cleared when the socket is closed.
  *
  * @NL80211_ATTR_TDLS_INITIATOR: flag attribute indicating the current end is
  *	the TDLS link initiator.
@@ -1688,6 +1734,32 @@
  *
  * @NL80211_ATTR_MAC_MASK: MAC address mask
  *
+ * @NL80211_ATTR_WIPHY_SELF_MANAGED_REG: flag attribute indicating this device
+ *	is self-managing its regulatory information and any regulatory domain
+ *	obtained from it is coming from the device's wiphy and not the global
+ *	cfg80211 regdomain.
+ *
+ * @NL80211_ATTR_EXT_FEATURES: extended feature flags contained in a byte
+ *	array. The feature flags are identified by their bit index (see &enum
+ *	nl80211_ext_feature_index). The bit index is ordered starting at the
+ *	least-significant bit of the first byte in the array, ie. bit index 0
+ *	is located at bit 0 of byte 0. bit index 25 would be located at bit 1
+ *	of byte 3 (u8 array).
+ *
+ * @NL80211_ATTR_SURVEY_RADIO_STATS: Request overall radio statistics to be
+ *	returned along with other survey data. If set, @NL80211_CMD_GET_SURVEY
+ *	may return a survey entry without a channel indicating global radio
+ *	statistics (only some values are valid and make sense.)
+ *	For devices that don't return such an entry even then, the information
+ *	should be contained in the result as the sum of the respective counters
+ *	over all channels.
+ *
+ * @NL80211_ATTR_SCHED_SCAN_DELAY: delay before a scheduled scan (or a
+ *	WoWLAN net-detect scan) is started, u32 in seconds.
+
+ * @NL80211_ATTR_REG_INDOOR: flag attribute, if set indicates that the device
+ *      is operating in an indoor environment.
+ *
  * @NUM_NL80211_ATTR: total number of nl80211_attrs available
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
@@ -2045,6 +2117,18 @@
 
 	NL80211_ATTR_MAC_MASK,
 
+	NL80211_ATTR_WIPHY_SELF_MANAGED_REG,
+
+	NL80211_ATTR_EXT_FEATURES,
+
+	NL80211_ATTR_SURVEY_RADIO_STATS,
+
+	NL80211_ATTR_NETNS_FD,
+
+	NL80211_ATTR_SCHED_SCAN_DELAY,
+
+	NL80211_ATTR_REG_INDOOR,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
@@ -2085,7 +2169,7 @@
 
 #define NL80211_MAX_SUPP_RATES			32
 #define NL80211_MAX_SUPP_HT_RATES		77
-#define NL80211_MAX_SUPP_REG_RULES		32
+#define NL80211_MAX_SUPP_REG_RULES		64
 #define NL80211_TKIP_DATA_OFFSET_ENCR_KEY	0
 #define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY	16
 #define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY	24
@@ -2225,8 +2309,15 @@
  * @NL80211_RATE_INFO_VHT_MCS: MCS index for VHT (u8)
  * @NL80211_RATE_INFO_VHT_NSS: number of streams in VHT (u8)
  * @NL80211_RATE_INFO_80_MHZ_WIDTH: 80 MHz VHT rate
- * @NL80211_RATE_INFO_80P80_MHZ_WIDTH: 80+80 MHz VHT rate
+ * @NL80211_RATE_INFO_80P80_MHZ_WIDTH: unused - 80+80 is treated the
+ *	same as 160 for purposes of the bitrates
  * @NL80211_RATE_INFO_160_MHZ_WIDTH: 160 MHz VHT rate
+ * @NL80211_RATE_INFO_10_MHZ_WIDTH: 10 MHz width - note that this is
+ *	a legacy rate and will be reported as the actual bitrate, i.e.
+ *	half the base (20 MHz) rate
+ * @NL80211_RATE_INFO_5_MHZ_WIDTH: 5 MHz width - note that this is
+ *	a legacy rate and will be reported as the actual bitrate, i.e.
+ *	a quarter of the base (20 MHz) rate
  * @__NL80211_RATE_INFO_AFTER_LAST: internal use
  */
 enum nl80211_rate_info {
@@ -2241,6 +2332,8 @@
 	NL80211_RATE_INFO_80_MHZ_WIDTH,
 	NL80211_RATE_INFO_80P80_MHZ_WIDTH,
 	NL80211_RATE_INFO_160_MHZ_WIDTH,
+	NL80211_RATE_INFO_10_MHZ_WIDTH,
+	NL80211_RATE_INFO_5_MHZ_WIDTH,
 
 	/* keep last */
 	__NL80211_RATE_INFO_AFTER_LAST,
@@ -2285,18 +2378,24 @@
  *
  * @__NL80211_STA_INFO_INVALID: attribute number 0 is reserved
  * @NL80211_STA_INFO_INACTIVE_TIME: time since last activity (u32, msecs)
- * @NL80211_STA_INFO_RX_BYTES: total received bytes (u32, from this station)
- * @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (u32, to this station)
- * @NL80211_STA_INFO_RX_BYTES64: total received bytes (u64, from this station)
- * @NL80211_STA_INFO_TX_BYTES64: total transmitted bytes (u64, to this station)
+ * @NL80211_STA_INFO_RX_BYTES: total received bytes (MPDU length)
+ *	(u32, from this station)
+ * @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (MPDU length)
+ *	(u32, to this station)
+ * @NL80211_STA_INFO_RX_BYTES64: total received bytes (MPDU length)
+ *	(u64, from this station)
+ * @NL80211_STA_INFO_TX_BYTES64: total transmitted bytes (MPDU length)
+ *	(u64, to this station)
  * @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm)
  * @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute
  * 	containing info as possible, see &enum nl80211_rate_info
- * @NL80211_STA_INFO_RX_PACKETS: total received packet (u32, from this station)
- * @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (u32, to this
- *	station)
- * @NL80211_STA_INFO_TX_RETRIES: total retries (u32, to this station)
- * @NL80211_STA_INFO_TX_FAILED: total failed packets (u32, to this station)
+ * @NL80211_STA_INFO_RX_PACKETS: total received packet (MSDUs and MMPDUs)
+ *	(u32, from this station)
+ * @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (MSDUs and MMPDUs)
+ *	(u32, to this station)
+ * @NL80211_STA_INFO_TX_RETRIES: total retries (MPDUs) (u32, to this station)
+ * @NL80211_STA_INFO_TX_FAILED: total failed packets (MPDUs)
+ *	(u32, to this station)
  * @NL80211_STA_INFO_SIGNAL_AVG: signal strength average (u8, dBm)
  * @NL80211_STA_INFO_LLID: the station's mesh LLID
  * @NL80211_STA_INFO_PLID: the station's mesh PLID
@@ -2320,6 +2419,16 @@
  *	Same format as NL80211_STA_INFO_CHAIN_SIGNAL.
  * @NL80211_STA_EXPECTED_THROUGHPUT: expected throughput considering also the
  *	802.11 header (u32, kbps)
+ * @NL80211_STA_INFO_RX_DROP_MISC: RX packets dropped for unspecified reasons
+ *	(u64)
+ * @NL80211_STA_INFO_BEACON_RX: number of beacons received from this peer (u64)
+ * @NL80211_STA_INFO_BEACON_SIGNAL_AVG: signal strength average
+ *	for beacons only (u8, dBm)
+ * @NL80211_STA_INFO_TID_STATS: per-TID statistics (see &enum nl80211_tid_stats)
+ *	This is a nested attribute where each the inner attribute number is the
+ *	TID+1 and the special TID 16 (i.e. value 17) is used for non-QoS frames;
+ *	each one of those is again nested with &enum nl80211_tid_stats
+ *	attributes carrying the actual values.
  * @__NL80211_STA_INFO_AFTER_LAST: internal
  * @NL80211_STA_INFO_MAX: highest possible station info attribute
  */
@@ -2352,6 +2461,10 @@
 	NL80211_STA_INFO_CHAIN_SIGNAL,
 	NL80211_STA_INFO_CHAIN_SIGNAL_AVG,
 	NL80211_STA_INFO_EXPECTED_THROUGHPUT,
+	NL80211_STA_INFO_RX_DROP_MISC,
+	NL80211_STA_INFO_BEACON_RX,
+	NL80211_STA_INFO_BEACON_SIGNAL_AVG,
+	NL80211_STA_INFO_TID_STATS,
 
 	/* keep last */
 	__NL80211_STA_INFO_AFTER_LAST,
@@ -2359,6 +2472,31 @@
 };
 
 /**
+ * enum nl80211_tid_stats - per TID statistics attributes
+ * @__NL80211_TID_STATS_INVALID: attribute number 0 is reserved
+ * @NL80211_TID_STATS_RX_MSDU: number of MSDUs received (u64)
+ * @NL80211_TID_STATS_TX_MSDU: number of MSDUs transmitted (or
+ *	attempted to transmit; u64)
+ * @NL80211_TID_STATS_TX_MSDU_RETRIES: number of retries for
+ *	transmitted MSDUs (not counting the first attempt; u64)
+ * @NL80211_TID_STATS_TX_MSDU_FAILED: number of failed transmitted
+ *	MSDUs (u64)
+ * @NUM_NL80211_TID_STATS: number of attributes here
+ * @NL80211_TID_STATS_MAX: highest numbered attribute here
+ */
+enum nl80211_tid_stats {
+	__NL80211_TID_STATS_INVALID,
+	NL80211_TID_STATS_RX_MSDU,
+	NL80211_TID_STATS_TX_MSDU,
+	NL80211_TID_STATS_TX_MSDU_RETRIES,
+	NL80211_TID_STATS_TX_MSDU_FAILED,
+
+	/* keep last */
+	NUM_NL80211_TID_STATS,
+	NL80211_TID_STATS_MAX = NUM_NL80211_TID_STATS - 1
+};
+
+/**
  * enum nl80211_mpath_flags - nl80211 mesh path flags
  *
  * @NL80211_MPATH_FLAG_ACTIVE: the mesh path is active
@@ -2772,16 +2910,18 @@
  * @NL80211_SURVEY_INFO_FREQUENCY: center frequency of channel
  * @NL80211_SURVEY_INFO_NOISE: noise level of channel (u8, dBm)
  * @NL80211_SURVEY_INFO_IN_USE: channel is currently being used
- * @NL80211_SURVEY_INFO_CHANNEL_TIME: amount of time (in ms) that the radio
- *	spent on this channel
- * @NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY: amount of the time the primary
+ * @NL80211_SURVEY_INFO_TIME: amount of time (in ms) that the radio
+ *	was turned on (on channel or globally)
+ * @NL80211_SURVEY_INFO_TIME_BUSY: amount of the time the primary
  *	channel was sensed busy (either due to activity or energy detect)
- * @NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY: amount of time the extension
+ * @NL80211_SURVEY_INFO_TIME_EXT_BUSY: amount of time the extension
  *	channel was sensed busy
- * @NL80211_SURVEY_INFO_CHANNEL_TIME_RX: amount of time the radio spent
- *	receiving data
- * @NL80211_SURVEY_INFO_CHANNEL_TIME_TX: amount of time the radio spent
- *	transmitting data
+ * @NL80211_SURVEY_INFO_TIME_RX: amount of time the radio spent
+ *	receiving data (on channel or globally)
+ * @NL80211_SURVEY_INFO_TIME_TX: amount of time the radio spent
+ *	transmitting data (on channel or globally)
+ * @NL80211_SURVEY_INFO_TIME_SCAN: time the radio spent for scan
+ *	(on this channel or globally)
  * @NL80211_SURVEY_INFO_MAX: highest survey info attribute number
  *	currently defined
  * @__NL80211_SURVEY_INFO_AFTER_LAST: internal use
@@ -2791,17 +2931,25 @@
 	NL80211_SURVEY_INFO_FREQUENCY,
 	NL80211_SURVEY_INFO_NOISE,
 	NL80211_SURVEY_INFO_IN_USE,
-	NL80211_SURVEY_INFO_CHANNEL_TIME,
-	NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY,
-	NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY,
-	NL80211_SURVEY_INFO_CHANNEL_TIME_RX,
-	NL80211_SURVEY_INFO_CHANNEL_TIME_TX,
+	NL80211_SURVEY_INFO_TIME,
+	NL80211_SURVEY_INFO_TIME_BUSY,
+	NL80211_SURVEY_INFO_TIME_EXT_BUSY,
+	NL80211_SURVEY_INFO_TIME_RX,
+	NL80211_SURVEY_INFO_TIME_TX,
+	NL80211_SURVEY_INFO_TIME_SCAN,
 
 	/* keep last */
 	__NL80211_SURVEY_INFO_AFTER_LAST,
 	NL80211_SURVEY_INFO_MAX = __NL80211_SURVEY_INFO_AFTER_LAST - 1
 };
 
+/* keep old names for compatibility */
+#define NL80211_SURVEY_INFO_CHANNEL_TIME		NL80211_SURVEY_INFO_TIME
+#define NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY		NL80211_SURVEY_INFO_TIME_BUSY
+#define NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY	NL80211_SURVEY_INFO_TIME_EXT_BUSY
+#define NL80211_SURVEY_INFO_CHANNEL_TIME_RX		NL80211_SURVEY_INFO_TIME_RX
+#define NL80211_SURVEY_INFO_CHANNEL_TIME_TX		NL80211_SURVEY_INFO_TIME_TX
+
 /**
  * enum nl80211_mntr_flags - monitor configuration flags
  *
@@ -2966,7 +3114,8 @@
  *
  * @NL80211_MESHCONF_PLINK_TIMEOUT: If no tx activity is seen from a STA we've
  *	established peering with for longer than this time (in seconds), then
- *	remove it from the STA's list of peers.  Default is 30 minutes.
+ *	remove it from the STA's list of peers. You may set this to 0 to disable
+ *	the removal of the STA. Default is 30 minutes.
  *
  * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use
  */
@@ -3238,6 +3387,9 @@
 /**
  * enum nl80211_bss_status - BSS "status"
  * @NL80211_BSS_STATUS_AUTHENTICATED: Authenticated with this BSS.
+ *	Note that this is no longer used since cfg80211 no longer
+ *	keeps track of whether or not authentication was done with
+ *	a given BSS.
  * @NL80211_BSS_STATUS_ASSOCIATED: Associated with this BSS.
  * @NL80211_BSS_STATUS_IBSS_JOINED: Joined to this IBSS.
  *
@@ -3565,6 +3717,8 @@
  * @NL80211_WOWLAN_TRIG_ANY: wake up on any activity, do not really put
  *	the chip into a special state -- works best with chips that have
  *	support for low-power operation already (flag)
+ *	Note that this mode is incompatible with all of the others, if
+ *	any others are even supported by the device.
  * @NL80211_WOWLAN_TRIG_DISCONNECT: wake up on disconnect, the way disconnect
  *	is detected is implementation-specific (flag)
  * @NL80211_WOWLAN_TRIG_MAGIC_PKT: wake up on magic packet (6x 0xff, followed
@@ -3621,9 +3775,12 @@
  * @NL80211_WOWLAN_TRIG_NET_DETECT: wake up when a configured network
  *	is detected.  This is a nested attribute that contains the
  *	same attributes used with @NL80211_CMD_START_SCHED_SCAN.  It
- *	specifies how the scan is performed (e.g. the interval and the
- *	channels to scan) as well as the scan results that will
- *	trigger a wake (i.e. the matchsets).
+ *	specifies how the scan is performed (e.g. the interval, the
+ *	channels to scan and the initial delay) as well as the scan
+ *	results that will trigger a wake (i.e. the matchsets).  This
+ *	attribute is also sent in a response to
+ *	@NL80211_CMD_GET_WIPHY, indicating the number of match sets
+ *	supported by the driver (u32).
  * @NL80211_WOWLAN_TRIG_NET_DETECT_RESULTS: nested attribute
  *	containing an array with information about what triggered the
  *	wake up.  If no elements are present in the array, it means
@@ -4194,6 +4351,21 @@
 };
 
 /**
+ * enum nl80211_ext_feature_index - bit index of extended features.
+ * @NL80211_EXT_FEATURE_VHT_IBSS: This driver supports IBSS with VHT datarates.
+ *
+ * @NUM_NL80211_EXT_FEATURES: number of extended features.
+ * @MAX_NL80211_EXT_FEATURES: highest extended feature index.
+ */
+enum nl80211_ext_feature_index {
+	NL80211_EXT_FEATURE_VHT_IBSS,
+
+	/* add new features before the definition below */
+	NUM_NL80211_EXT_FEATURES,
+	MAX_NL80211_EXT_FEATURES = NUM_NL80211_EXT_FEATURES - 1
+};
+
+/**
  * enum nl80211_probe_resp_offload_support_attr - optional supported
  *	protocols for probe-response offloading by the driver/FW.
  *	To be used with the %NL80211_ATTR_PROBE_RESP_OFFLOAD attribute.
diff --git a/src/utils/bitfield.c b/src/utils/bitfield.c
index f90e4be..8dcec39 100644
--- a/src/utils/bitfield.c
+++ b/src/utils/bitfield.c
@@ -76,11 +76,11 @@
 int bitfield_get_first_zero(struct bitfield *bf)
 {
 	size_t i;
-	for (i = 0; i <= (bf->max_bits + 7) / 8; i++) {
+	for (i = 0; i < (bf->max_bits + 7) / 8; i++) {
 		if (bf->bits[i] != 0xff)
 			break;
 	}
-	if (i > (bf->max_bits + 7) / 8)
+	if (i == (bf->max_bits + 7) / 8)
 		return -1;
 	i = i * 8 + first_zero(bf->bits[i]);
 	if (i >= bf->max_bits)