Cumulative patch from commit 3b208346ec56342fda736e62601df485ed002493
3b20834 ctrl_iface: BSS command to skip info items if parsing fails
a9c52e8 HS 2.0R2: No longer use HTTP_RAW_POST_DATA
04c18fa curl: Don't free memory for subjectAltName before calling callback
5a8e48f mesh: Use MESH_CAP_* macros for mesh capability
d70a8ab mesh: Ignore crowded peer
a151b0e mesh: Select pairwise and group cipher based on network profile
3b6deac mesh: Avoid use of hardcoded cipher
f868d56 mesh: Clean up AMPE element encoding and parsing
4367eec mesh: Do not use RX MGTK as RX IGTK
a4eec3c mesh: Use variable length MGTK for RX
fccba2c mesh: Generate a separate TX IGTK if PMF is enabled
696f792 mesh: Support variable length TX MGTK
b02f4d0 mesh: Add variable length MTK support
846201d mesh: Coding style cleanup for MTK derivation
0f76d82 mesh: Fix MTK derivation to use AKM suite selector
f5ba692 mesh: Coding style cleanup for AEK derivation
a59c5e9 mesh: Fix AEK derivation to use AKM suite selector
18aca1a mesh: Use ieee80211w profile parameter
b8b499e mesh: Use WPA_NONCE_LEN macro
bb4e19e hostapd: Skip hostapd ACL check for drivers supporting ACL offload
00ec535 WPS: Fix memory leak with wps_ie in wpa_bss_is_wps_candidate()
d1296da Reserve QCA vendor specific nl80211 command 121
fae7b37 WPS: Do not expire probable BSSes for WPS connection
52a6c9c Add a QCA vendor command to configure AP parameters
31d3692 hostapd: Add comment about '-i' parameter in hostapd.conf
40f6282 hostapd: Accept interface names as a command line parameter
cc27c8e hostapd: Fix early init failure path
976dfb3 FST: Make fst_global_deinit() more robust
7a69fad mesh: Sync max peer links with kernel
f7cb6e9 Update PKCS#11 references in template wpa_supplicant.conf
c3d7fb7 OpenSSL: Initialise PKCS#11 engine even if found with ENGINE_by_id()
fdc1188 nl80211: Fix use-after-free in qca_nl80211_get_features()
8359472 hostapd Make GAS Address3 field selection behavior configurable
6996ff7 hostapd: Fix Public Action frame TX status processing for wildcard BSSID
78a3632 hostapd: Fix Public Action frame addressing (BSSID field)
c86bef2 wpa_supplicant: Make GAS Address3 field selection behavior configurable
a5a187b nl80211: Add TEST_FAIL() to command generation and set_mode
ee854ff mesh: Remove extra newline from the end of an error message
331f077 mesh: Allow 160 MHz channel to be configured
92a515b nl80211: Update drv->assoc_freq on mesh join
d2cc8bb mesh: Remove unreachable code
cc9a257 nl80211: Use extended capabilities per interface type
c6edea0 Sync with mac80211-next.git include/uapi/linux/nl80211.h
9a5160f Report connection timeouts in CTRL-EVENT-ASSOC-REJECT
dad0129 mesh: Support simple SAE group negotiation case
b4c738e mesh: Fix error path handling for RSN (MGTK init)
f4b4ddf D-Bus: Remove unused wpas_dbus_signal_p2p_group_started() parameter
4fe50bb D-Bus: Indicate whether created group is persistent or not
62fc8e6 mesh: Fix MESH_INTERFACE_ADD error path cleanup
9c10be3 mesh: Fix error path handling in init OOM cases
7012e25 Remove dead code from wpas_sched_scan_plans_set()
8e909fa Improve reattach scan OOM failure handling
f37d8a4 Indicate scan failure event on parameter cloning failure
9356823 wpaspy: Fix potentially referencing non existing attribute
Change-Id: I656be560523c206195a5bf8649e73d8aa70bd8f9
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
diff --git a/src/drivers/nl80211_copy.h b/src/drivers/nl80211_copy.h
index b460628..53c8278 100644
--- a/src/drivers/nl80211_copy.h
+++ b/src/drivers/nl80211_copy.h
@@ -493,7 +493,12 @@
* This attribute is ignored if driver does not support roam scan.
* It is also sent as an event, with the BSSID and response IEs when the
* connection is established or failed to be established. This can be
- * determined by the STATUS_CODE attribute.
+ * determined by the %NL80211_ATTR_STATUS_CODE attribute (0 = success,
+ * non-zero = failure). If %NL80211_ATTR_TIMED_OUT is included in the
+ * event, the connection attempt failed due to not being able to initiate
+ * authentication/association or not receiving a response from the AP.
+ * Non-zero %NL80211_ATTR_STATUS_CODE value is indicated in that case as
+ * well to remain backwards compatible.
* @NL80211_CMD_ROAM: request that the card roam (currently not implemented),
* sent as an event when the card/driver roamed by itself.
* @NL80211_CMD_DISCONNECT: drop a given connection; also used to notify
@@ -1817,6 +1822,13 @@
* @NL80211_ATTR_STA_SUPPORT_P2P_PS: whether P2P PS mechanism supported
* or not. u8, one of the values of &enum nl80211_sta_p2p_ps_status
*
+ * @NL80211_ATTR_PAD: attribute used for padding for 64-bit alignment
+ *
+ * @NL80211_ATTR_IFTYPE_EXT_CAPA: Nested attribute of the following attributes:
+ * %NL80211_ATTR_IFTYPE, %NL80211_ATTR_EXT_CAPA,
+ * %NL80211_ATTR_EXT_CAPA_MASK, to specify the extended capabilities per
+ * interface type.
+ *
* @NUM_NL80211_ATTR: total number of nl80211_attrs available
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
@@ -2197,6 +2209,10 @@
NL80211_ATTR_STA_SUPPORT_P2P_PS,
+ NL80211_ATTR_PAD,
+
+ NL80211_ATTR_IFTYPE_EXT_CAPA,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
@@ -2511,6 +2527,9 @@
* TID+1 and the special TID 16 (i.e. value 17) is used for non-QoS frames;
* each one of those is again nested with &enum nl80211_tid_stats
* attributes carrying the actual values.
+ * @NL80211_STA_INFO_RX_DURATION: aggregate PPDU duration for all frames
+ * received from the station (u64, usec)
+ * @NL80211_STA_INFO_PAD: attribute used for padding for 64-bit alignment
* @__NL80211_STA_INFO_AFTER_LAST: internal
* @NL80211_STA_INFO_MAX: highest possible station info attribute
*/
@@ -2547,6 +2566,8 @@
NL80211_STA_INFO_BEACON_RX,
NL80211_STA_INFO_BEACON_SIGNAL_AVG,
NL80211_STA_INFO_TID_STATS,
+ NL80211_STA_INFO_RX_DURATION,
+ NL80211_STA_INFO_PAD,
/* keep last */
__NL80211_STA_INFO_AFTER_LAST,
@@ -2563,6 +2584,7 @@
* transmitted MSDUs (not counting the first attempt; u64)
* @NL80211_TID_STATS_TX_MSDU_FAILED: number of failed transmitted
* MSDUs (u64)
+ * @NL80211_TID_STATS_PAD: attribute used for padding for 64-bit alignment
* @NUM_NL80211_TID_STATS: number of attributes here
* @NL80211_TID_STATS_MAX: highest numbered attribute here
*/
@@ -2572,6 +2594,7 @@
NL80211_TID_STATS_TX_MSDU,
NL80211_TID_STATS_TX_MSDU_RETRIES,
NL80211_TID_STATS_TX_MSDU_FAILED,
+ NL80211_TID_STATS_PAD,
/* keep last */
NUM_NL80211_TID_STATS,
@@ -3008,6 +3031,7 @@
* transmitting data (on channel or globally)
* @NL80211_SURVEY_INFO_TIME_SCAN: time the radio spent for scan
* (on this channel or globally)
+ * @NL80211_SURVEY_INFO_PAD: attribute used for padding for 64-bit alignment
* @NL80211_SURVEY_INFO_MAX: highest survey info attribute number
* currently defined
* @__NL80211_SURVEY_INFO_AFTER_LAST: internal use
@@ -3023,6 +3047,7 @@
NL80211_SURVEY_INFO_TIME_RX,
NL80211_SURVEY_INFO_TIME_TX,
NL80211_SURVEY_INFO_TIME_SCAN,
+ NL80211_SURVEY_INFO_PAD,
/* keep last */
__NL80211_SURVEY_INFO_AFTER_LAST,
@@ -3448,6 +3473,7 @@
* @NL80211_BSS_LAST_SEEN_BOOTTIME: CLOCK_BOOTTIME timestamp when this entry
* was last updated by a received frame. The value is expected to be
* accurate to about 10ms. (u64, nanoseconds)
+ * @NL80211_BSS_PAD: attribute used for padding for 64-bit alignment
* @__NL80211_BSS_AFTER_LAST: internal
* @NL80211_BSS_MAX: highest BSS attribute
*/
@@ -3468,6 +3494,7 @@
NL80211_BSS_BEACON_TSF,
NL80211_BSS_PRESP_DATA,
NL80211_BSS_LAST_SEEN_BOOTTIME,
+ NL80211_BSS_PAD,
/* keep last */
__NL80211_BSS_AFTER_LAST,
@@ -3653,11 +3680,15 @@
* @NL80211_BAND_2GHZ: 2.4 GHz ISM band
* @NL80211_BAND_5GHZ: around 5 GHz band (4.9 - 5.7 GHz)
* @NL80211_BAND_60GHZ: around 60 GHz band (58.32 - 64.80 GHz)
+ * @NUM_NL80211_BANDS: number of bands, avoid using this in userspace
+ * since newer kernel versions may support more bands
*/
enum nl80211_band {
NL80211_BAND_2GHZ,
NL80211_BAND_5GHZ,
NL80211_BAND_60GHZ,
+
+ NUM_NL80211_BANDS,
};
/**