Cumulative patch from commit 3b208346ec56342fda736e62601df485ed002493
3b20834 ctrl_iface: BSS command to skip info items if parsing fails
a9c52e8 HS 2.0R2: No longer use HTTP_RAW_POST_DATA
04c18fa curl: Don't free memory for subjectAltName before calling callback
5a8e48f mesh: Use MESH_CAP_* macros for mesh capability
d70a8ab mesh: Ignore crowded peer
a151b0e mesh: Select pairwise and group cipher based on network profile
3b6deac mesh: Avoid use of hardcoded cipher
f868d56 mesh: Clean up AMPE element encoding and parsing
4367eec mesh: Do not use RX MGTK as RX IGTK
a4eec3c mesh: Use variable length MGTK for RX
fccba2c mesh: Generate a separate TX IGTK if PMF is enabled
696f792 mesh: Support variable length TX MGTK
b02f4d0 mesh: Add variable length MTK support
846201d mesh: Coding style cleanup for MTK derivation
0f76d82 mesh: Fix MTK derivation to use AKM suite selector
f5ba692 mesh: Coding style cleanup for AEK derivation
a59c5e9 mesh: Fix AEK derivation to use AKM suite selector
18aca1a mesh: Use ieee80211w profile parameter
b8b499e mesh: Use WPA_NONCE_LEN macro
bb4e19e hostapd: Skip hostapd ACL check for drivers supporting ACL offload
00ec535 WPS: Fix memory leak with wps_ie in wpa_bss_is_wps_candidate()
d1296da Reserve QCA vendor specific nl80211 command 121
fae7b37 WPS: Do not expire probable BSSes for WPS connection
52a6c9c Add a QCA vendor command to configure AP parameters
31d3692 hostapd: Add comment about '-i' parameter in hostapd.conf
40f6282 hostapd: Accept interface names as a command line parameter
cc27c8e hostapd: Fix early init failure path
976dfb3 FST: Make fst_global_deinit() more robust
7a69fad mesh: Sync max peer links with kernel
f7cb6e9 Update PKCS#11 references in template wpa_supplicant.conf
c3d7fb7 OpenSSL: Initialise PKCS#11 engine even if found with ENGINE_by_id()
fdc1188 nl80211: Fix use-after-free in qca_nl80211_get_features()
8359472 hostapd Make GAS Address3 field selection behavior configurable
6996ff7 hostapd: Fix Public Action frame TX status processing for wildcard BSSID
78a3632 hostapd: Fix Public Action frame addressing (BSSID field)
c86bef2 wpa_supplicant: Make GAS Address3 field selection behavior configurable
a5a187b nl80211: Add TEST_FAIL() to command generation and set_mode
ee854ff mesh: Remove extra newline from the end of an error message
331f077 mesh: Allow 160 MHz channel to be configured
92a515b nl80211: Update drv->assoc_freq on mesh join
d2cc8bb mesh: Remove unreachable code
cc9a257 nl80211: Use extended capabilities per interface type
c6edea0 Sync with mac80211-next.git include/uapi/linux/nl80211.h
9a5160f Report connection timeouts in CTRL-EVENT-ASSOC-REJECT
dad0129 mesh: Support simple SAE group negotiation case
b4c738e mesh: Fix error path handling for RSN (MGTK init)
f4b4ddf D-Bus: Remove unused wpas_dbus_signal_p2p_group_started() parameter
4fe50bb D-Bus: Indicate whether created group is persistent or not
62fc8e6 mesh: Fix MESH_INTERFACE_ADD error path cleanup
9c10be3 mesh: Fix error path handling in init OOM cases
7012e25 Remove dead code from wpas_sched_scan_plans_set()
8e909fa Improve reattach scan OOM failure handling
f37d8a4 Indicate scan failure event on parameter cloning failure
9356823 wpaspy: Fix potentially referencing non existing attribute
Change-Id: I656be560523c206195a5bf8649e73d8aa70bd8f9
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
diff --git a/src/drivers/driver.h b/src/drivers/driver.h
index 4675be2..edb6978 100644
--- a/src/drivers/driver.h
+++ b/src/drivers/driver.h
@@ -3560,6 +3560,19 @@
* Returns: 0 on success or -1 on failure
*/
int (*configure_data_frame_filters)(void *priv, u32 filter_flags);
+
+ /**
+ * get_ext_capab - Get extended capabilities for the specified interface
+ * @priv: Private driver interface data
+ * @type: Interface type for which to get extended capabilities
+ * @ext_capab: Extended capabilities fetched
+ * @ext_capab_mask: Extended capabilities mask
+ * @ext_capab_len: Length of the extended capabilities
+ * Returns: 0 on success or -1 on failure
+ */
+ int (*get_ext_capab)(void *priv, enum wpa_driver_if_type type,
+ const u8 **ext_capab, const u8 **ext_capab_mask,
+ unsigned int *ext_capab_len);
};
@@ -4429,6 +4442,12 @@
* status_code - Status Code from (Re)association Response
*/
u16 status_code;
+
+ /**
+ * timed_out - Whether failure is due to timeout (etc.) rather
+ * than explicit rejection response from the AP.
+ */
+ int timed_out;
} assoc_reject;
struct timeout_event {
diff --git a/src/drivers/driver_nl80211.c b/src/drivers/driver_nl80211.c
index 12a417b..e7a818a 100644
--- a/src/drivers/driver_nl80211.c
+++ b/src/drivers/driver_nl80211.c
@@ -445,6 +445,8 @@
void * nl80211_cmd(struct wpa_driver_nl80211_data *drv,
struct nl_msg *msg, int flags, uint8_t cmd)
{
+ if (TEST_FAIL())
+ return NULL;
return genlmsg_put(msg, 0, 0, drv->global->nl80211_id,
0, flags, cmd, 0);
}
@@ -2412,6 +2414,7 @@
static void wpa_driver_nl80211_deinit(struct i802_bss *bss)
{
struct wpa_driver_nl80211_data *drv = bss->drv;
+ unsigned int i;
wpa_printf(MSG_INFO, "nl80211: deinit ifname=%s disabled_11b_rates=%d",
bss->ifname, drv->disabled_11b_rates);
@@ -2508,6 +2511,10 @@
os_free(drv->extended_capa);
os_free(drv->extended_capa_mask);
+ for (i = 0; i < drv->num_iface_ext_capa; i++) {
+ os_free(drv->iface_ext_capa[i].ext_capa);
+ os_free(drv->iface_ext_capa[i].ext_capa_mask);
+ }
os_free(drv->first_bss);
os_free(drv);
}
@@ -4162,7 +4169,7 @@
}
-static const char * nl80211_iftype_str(enum nl80211_iftype mode)
+const char * nl80211_iftype_str(enum nl80211_iftype mode)
{
switch (mode) {
case NL80211_IFTYPE_ADHOC:
@@ -5113,6 +5120,9 @@
int res;
int mode_switch_res;
+ if (TEST_FAIL())
+ return -1;
+
mode_switch_res = nl80211_set_mode(drv, drv->ifindex, nlmode);
if (mode_switch_res && nlmode == nl80211_get_ifmode(bss))
mode_switch_res = 0;
@@ -8417,8 +8427,7 @@
if (!(params->conf.flags & WPA_DRIVER_MESH_CONF_FLAG_AUTO_PLINKS) &&
nla_put_u32(msg, NL80211_MESHCONF_AUTO_OPEN_PLINKS, 0))
goto fail;
- if ((params->conf.flags & WPA_DRIVER_MESH_FLAG_DRIVER_MPM) &&
- nla_put_u16(msg, NL80211_MESHCONF_MAX_PEER_LINKS,
+ if (nla_put_u16(msg, NL80211_MESHCONF_MAX_PEER_LINKS,
params->max_peer_links))
goto fail;
@@ -8442,7 +8451,7 @@
goto fail;
}
ret = 0;
- bss->freq = params->freq.freq;
+ drv->assoc_freq = bss->freq = params->freq.freq;
wpa_printf(MSG_DEBUG, "nl80211: mesh join request send successfully");
fail:
@@ -9202,6 +9211,39 @@
}
+static int nl80211_get_ext_capab(void *priv, enum wpa_driver_if_type type,
+ const u8 **ext_capa, const u8 **ext_capa_mask,
+ unsigned int *ext_capa_len)
+{
+ struct i802_bss *bss = priv;
+ struct wpa_driver_nl80211_data *drv = bss->drv;
+ enum nl80211_iftype nlmode;
+ unsigned int i;
+
+ if (!ext_capa || !ext_capa_mask || !ext_capa_len)
+ return -1;
+
+ nlmode = wpa_driver_nl80211_if_type(type);
+
+ /* By default, use the per-radio values */
+ *ext_capa = drv->extended_capa;
+ *ext_capa_mask = drv->extended_capa_mask;
+ *ext_capa_len = drv->extended_capa_len;
+
+ /* Replace the default value if a per-interface type value exists */
+ for (i = 0; i < drv->num_iface_ext_capa; i++) {
+ if (nlmode == drv->iface_ext_capa[i].iftype) {
+ *ext_capa = drv->iface_ext_capa[i].ext_capa;
+ *ext_capa_mask = drv->iface_ext_capa[i].ext_capa_mask;
+ *ext_capa_len = drv->iface_ext_capa[i].ext_capa_len;
+ break;
+ }
+ }
+
+ return 0;
+}
+
+
const struct wpa_driver_ops wpa_driver_nl80211_ops = {
.name = "nl80211",
.desc = "Linux nl80211/cfg80211",
@@ -9319,4 +9361,5 @@
.set_prob_oper_freq = nl80211_set_prob_oper_freq,
#endif /* CONFIG_DRIVER_NL80211_QCA */
.configure_data_frame_filters = nl80211_configure_data_frame_filters,
+ .get_ext_capab = nl80211_get_ext_capab,
};
diff --git a/src/drivers/driver_nl80211.h b/src/drivers/driver_nl80211.h
index b0d2b6d..283dfd9 100644
--- a/src/drivers/driver_nl80211.h
+++ b/src/drivers/driver_nl80211.h
@@ -96,6 +96,13 @@
struct wpa_driver_capa capa;
u8 *extended_capa, *extended_capa_mask;
unsigned int extended_capa_len;
+ struct drv_nl80211_ext_capa {
+ enum nl80211_iftype iftype;
+ u8 *ext_capa, *ext_capa_mask;
+ unsigned int ext_capa_len;
+ } iface_ext_capa[NL80211_IFTYPE_MAX];
+ unsigned int num_iface_ext_capa;
+
int has_capability;
int operstate;
@@ -251,6 +258,8 @@
int process_global_event(struct nl_msg *msg, void *arg);
int process_bss_event(struct nl_msg *msg, void *arg);
+const char * nl80211_iftype_str(enum nl80211_iftype mode);
+
#ifdef ANDROID
int android_nl_socket_set_nonblocking(struct nl_handle *handle);
int android_pno_start(struct i802_bss *bss,
diff --git a/src/drivers/driver_nl80211_capa.c b/src/drivers/driver_nl80211_capa.c
index 8f07bcb..1ebbdaa 100644
--- a/src/drivers/driver_nl80211_capa.c
+++ b/src/drivers/driver_nl80211_capa.c
@@ -486,6 +486,74 @@
}
+static void wiphy_info_extended_capab(struct wpa_driver_nl80211_data *drv,
+ struct nlattr *tb)
+{
+ int rem = 0, i;
+ struct nlattr *tb1[NL80211_ATTR_MAX + 1], *attr;
+
+ if (!tb || drv->num_iface_ext_capa == NL80211_IFTYPE_MAX)
+ return;
+
+ nla_for_each_nested(attr, tb, rem) {
+ unsigned int len;
+ struct drv_nl80211_ext_capa *capa;
+
+ nla_parse(tb1, NL80211_ATTR_MAX, nla_data(attr),
+ nla_len(attr), NULL);
+
+ if (!tb1[NL80211_ATTR_IFTYPE] ||
+ !tb1[NL80211_ATTR_EXT_CAPA] ||
+ !tb1[NL80211_ATTR_EXT_CAPA_MASK])
+ continue;
+
+ capa = &drv->iface_ext_capa[drv->num_iface_ext_capa];
+ capa->iftype = nla_get_u32(tb1[NL80211_ATTR_IFTYPE]);
+ wpa_printf(MSG_DEBUG,
+ "nl80211: Driver-advertised extended capabilities for interface type %s",
+ nl80211_iftype_str(capa->iftype));
+
+ len = nla_len(tb1[NL80211_ATTR_EXT_CAPA]);
+ capa->ext_capa = os_malloc(len);
+ if (!capa->ext_capa)
+ goto err;
+
+ os_memcpy(capa->ext_capa, nla_data(tb1[NL80211_ATTR_EXT_CAPA]),
+ len);
+ capa->ext_capa_len = len;
+ wpa_hexdump(MSG_DEBUG, "nl80211: Extended capabilities",
+ capa->ext_capa, capa->ext_capa_len);
+
+ len = nla_len(tb1[NL80211_ATTR_EXT_CAPA_MASK]);
+ capa->ext_capa_mask = os_malloc(len);
+ if (!capa->ext_capa_mask)
+ goto err;
+
+ os_memcpy(capa->ext_capa_mask,
+ nla_data(tb1[NL80211_ATTR_EXT_CAPA_MASK]), len);
+ wpa_hexdump(MSG_DEBUG, "nl80211: Extended capabilities mask",
+ capa->ext_capa_mask, capa->ext_capa_len);
+
+ drv->num_iface_ext_capa++;
+ if (drv->num_iface_ext_capa == NL80211_IFTYPE_MAX)
+ break;
+ }
+
+ return;
+
+err:
+ /* Cleanup allocated memory on error */
+ for (i = 0; i < NL80211_IFTYPE_MAX; i++) {
+ os_free(drv->iface_ext_capa[i].ext_capa);
+ drv->iface_ext_capa[i].ext_capa = NULL;
+ os_free(drv->iface_ext_capa[i].ext_capa_mask);
+ drv->iface_ext_capa[i].ext_capa_mask = NULL;
+ drv->iface_ext_capa[i].ext_capa_len = 0;
+ }
+ drv->num_iface_ext_capa = 0;
+}
+
+
static int wiphy_info_handler(struct nl_msg *msg, void *arg)
{
struct nlattr *tb[NL80211_ATTR_MAX + 1];
@@ -576,6 +644,9 @@
nla_len(tb[NL80211_ATTR_EXT_CAPA]));
drv->extended_capa_len =
nla_len(tb[NL80211_ATTR_EXT_CAPA]);
+ wpa_hexdump(MSG_DEBUG,
+ "nl80211: Driver-advertised extended capabilities (default)",
+ drv->extended_capa, drv->extended_capa_len);
}
drv->extended_capa_mask =
os_malloc(nla_len(tb[NL80211_ATTR_EXT_CAPA_MASK]));
@@ -583,6 +654,10 @@
os_memcpy(drv->extended_capa_mask,
nla_data(tb[NL80211_ATTR_EXT_CAPA_MASK]),
nla_len(tb[NL80211_ATTR_EXT_CAPA_MASK]));
+ wpa_hexdump(MSG_DEBUG,
+ "nl80211: Driver-advertised extended capabilities mask (default)",
+ drv->extended_capa_mask,
+ drv->extended_capa_len);
} else {
os_free(drv->extended_capa);
drv->extended_capa = NULL;
@@ -590,6 +665,8 @@
}
}
+ wiphy_info_extended_capab(drv, tb[NL80211_ATTR_IFTYPE_EXT_CAPA]);
+
if (tb[NL80211_ATTR_VENDOR_DATA]) {
struct nlattr *nl;
int rem;
diff --git a/src/drivers/driver_nl80211_event.c b/src/drivers/driver_nl80211_event.c
index bd16edb..961a2e4 100644
--- a/src/drivers/driver_nl80211_event.c
+++ b/src/drivers/driver_nl80211_event.c
@@ -265,6 +265,7 @@
enum nl80211_commands cmd, struct nlattr *status,
struct nlattr *addr, struct nlattr *req_ie,
struct nlattr *resp_ie,
+ struct nlattr *timed_out,
struct nlattr *authorized,
struct nlattr *key_replay_ctr,
struct nlattr *ptk_kck,
@@ -322,6 +323,7 @@
event.assoc_reject.resp_ies_len = nla_len(resp_ie);
}
event.assoc_reject.status_code = status_code;
+ event.assoc_reject.timed_out = timed_out != NULL;
wpa_supplicant_event(drv->ctx, EVENT_ASSOC_REJECT, &event);
return;
}
@@ -1644,6 +1646,7 @@
tb[QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_BSSID],
tb[QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_REQ_IE],
tb[QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_RESP_IE],
+ NULL,
tb[QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_AUTHORIZED],
tb[QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_KEY_REPLAY_CTR],
tb[QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_PTK_KCK],
@@ -2132,6 +2135,7 @@
tb[NL80211_ATTR_MAC],
tb[NL80211_ATTR_REQ_IE],
tb[NL80211_ATTR_RESP_IE],
+ tb[NL80211_ATTR_TIMED_OUT],
NULL, NULL, NULL, NULL, NULL);
break;
case NL80211_CMD_CH_SWITCH_NOTIFY:
diff --git a/src/drivers/nl80211_copy.h b/src/drivers/nl80211_copy.h
index b460628..53c8278 100644
--- a/src/drivers/nl80211_copy.h
+++ b/src/drivers/nl80211_copy.h
@@ -493,7 +493,12 @@
* This attribute is ignored if driver does not support roam scan.
* It is also sent as an event, with the BSSID and response IEs when the
* connection is established or failed to be established. This can be
- * determined by the STATUS_CODE attribute.
+ * determined by the %NL80211_ATTR_STATUS_CODE attribute (0 = success,
+ * non-zero = failure). If %NL80211_ATTR_TIMED_OUT is included in the
+ * event, the connection attempt failed due to not being able to initiate
+ * authentication/association or not receiving a response from the AP.
+ * Non-zero %NL80211_ATTR_STATUS_CODE value is indicated in that case as
+ * well to remain backwards compatible.
* @NL80211_CMD_ROAM: request that the card roam (currently not implemented),
* sent as an event when the card/driver roamed by itself.
* @NL80211_CMD_DISCONNECT: drop a given connection; also used to notify
@@ -1817,6 +1822,13 @@
* @NL80211_ATTR_STA_SUPPORT_P2P_PS: whether P2P PS mechanism supported
* or not. u8, one of the values of &enum nl80211_sta_p2p_ps_status
*
+ * @NL80211_ATTR_PAD: attribute used for padding for 64-bit alignment
+ *
+ * @NL80211_ATTR_IFTYPE_EXT_CAPA: Nested attribute of the following attributes:
+ * %NL80211_ATTR_IFTYPE, %NL80211_ATTR_EXT_CAPA,
+ * %NL80211_ATTR_EXT_CAPA_MASK, to specify the extended capabilities per
+ * interface type.
+ *
* @NUM_NL80211_ATTR: total number of nl80211_attrs available
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
@@ -2197,6 +2209,10 @@
NL80211_ATTR_STA_SUPPORT_P2P_PS,
+ NL80211_ATTR_PAD,
+
+ NL80211_ATTR_IFTYPE_EXT_CAPA,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
@@ -2511,6 +2527,9 @@
* TID+1 and the special TID 16 (i.e. value 17) is used for non-QoS frames;
* each one of those is again nested with &enum nl80211_tid_stats
* attributes carrying the actual values.
+ * @NL80211_STA_INFO_RX_DURATION: aggregate PPDU duration for all frames
+ * received from the station (u64, usec)
+ * @NL80211_STA_INFO_PAD: attribute used for padding for 64-bit alignment
* @__NL80211_STA_INFO_AFTER_LAST: internal
* @NL80211_STA_INFO_MAX: highest possible station info attribute
*/
@@ -2547,6 +2566,8 @@
NL80211_STA_INFO_BEACON_RX,
NL80211_STA_INFO_BEACON_SIGNAL_AVG,
NL80211_STA_INFO_TID_STATS,
+ NL80211_STA_INFO_RX_DURATION,
+ NL80211_STA_INFO_PAD,
/* keep last */
__NL80211_STA_INFO_AFTER_LAST,
@@ -2563,6 +2584,7 @@
* transmitted MSDUs (not counting the first attempt; u64)
* @NL80211_TID_STATS_TX_MSDU_FAILED: number of failed transmitted
* MSDUs (u64)
+ * @NL80211_TID_STATS_PAD: attribute used for padding for 64-bit alignment
* @NUM_NL80211_TID_STATS: number of attributes here
* @NL80211_TID_STATS_MAX: highest numbered attribute here
*/
@@ -2572,6 +2594,7 @@
NL80211_TID_STATS_TX_MSDU,
NL80211_TID_STATS_TX_MSDU_RETRIES,
NL80211_TID_STATS_TX_MSDU_FAILED,
+ NL80211_TID_STATS_PAD,
/* keep last */
NUM_NL80211_TID_STATS,
@@ -3008,6 +3031,7 @@
* transmitting data (on channel or globally)
* @NL80211_SURVEY_INFO_TIME_SCAN: time the radio spent for scan
* (on this channel or globally)
+ * @NL80211_SURVEY_INFO_PAD: attribute used for padding for 64-bit alignment
* @NL80211_SURVEY_INFO_MAX: highest survey info attribute number
* currently defined
* @__NL80211_SURVEY_INFO_AFTER_LAST: internal use
@@ -3023,6 +3047,7 @@
NL80211_SURVEY_INFO_TIME_RX,
NL80211_SURVEY_INFO_TIME_TX,
NL80211_SURVEY_INFO_TIME_SCAN,
+ NL80211_SURVEY_INFO_PAD,
/* keep last */
__NL80211_SURVEY_INFO_AFTER_LAST,
@@ -3448,6 +3473,7 @@
* @NL80211_BSS_LAST_SEEN_BOOTTIME: CLOCK_BOOTTIME timestamp when this entry
* was last updated by a received frame. The value is expected to be
* accurate to about 10ms. (u64, nanoseconds)
+ * @NL80211_BSS_PAD: attribute used for padding for 64-bit alignment
* @__NL80211_BSS_AFTER_LAST: internal
* @NL80211_BSS_MAX: highest BSS attribute
*/
@@ -3468,6 +3494,7 @@
NL80211_BSS_BEACON_TSF,
NL80211_BSS_PRESP_DATA,
NL80211_BSS_LAST_SEEN_BOOTTIME,
+ NL80211_BSS_PAD,
/* keep last */
__NL80211_BSS_AFTER_LAST,
@@ -3653,11 +3680,15 @@
* @NL80211_BAND_2GHZ: 2.4 GHz ISM band
* @NL80211_BAND_5GHZ: around 5 GHz band (4.9 - 5.7 GHz)
* @NL80211_BAND_60GHZ: around 60 GHz band (58.32 - 64.80 GHz)
+ * @NUM_NL80211_BANDS: number of bands, avoid using this in userspace
+ * since newer kernel versions may support more bands
*/
enum nl80211_band {
NL80211_BAND_2GHZ,
NL80211_BAND_5GHZ,
NL80211_BAND_60GHZ,
+
+ NUM_NL80211_BANDS,
};
/**