[wpa_supplicant] Cumulative patch from fe468b071
Bug: 124017368
Test: Device boots up and connects to WPA3/OWE wifi networks, run traffic.
Test: Able to turn on/off softap, associate wifi STA, run traffic.
Test: DPP functional test.
Test: Regression test passed (Bug: 124301325)
fe468b071 HE: Fix set_he_cap() parsing of config options for MU EDCA Params
f3a841bbf Do not disassociate not-associated STA on timeout
91205c8eb OpenSSL: Fix uninitialized variable in CRL reloading corner case
092a19222 Use for_each_element() in ieee802_11_parse_elems()
b50a63896 common: Use for_each_element_id/_extid for get_ie/get_ie_ext/get_vendor_ie
b64479742 common: Use for_each_element_id() in mb_ies_info_by_ies()
9008048f0 common: Use for_each_element_id() in ieee802_11_vendor_ie_concat()
eb84238df common: Use for_each_element() in ieee802_11_ie_count()
0e0c31bdc common: Add strongly typed element iteration macros
525923b1d tests: EAPOL-Key fuzzing tool
02a0a2393 RSN: Do not start preauthentication timer without candidates
1e5506588 JSON: Fix string parsing when \\ escape is at the end of buffer
0dedcb315 JSON: Fix parsing of a number from the end of the buffer
79fa1b453 tests: JSON parser fuzzer
62269c8d8 TLS: Fix X.509 certificate name conversion into empty string
3eae9766b TLS: Fix ASN.1 parsing with no room for the header
fbc2123a1 TLS: Fix AlertDescription for missing partial processing case
1ac9c020b tests: TLS fuzzing tool
f3cca8b1e TLS server: Check credentials have been configured before using them
19dd7a736 TLS server: Local failure information on verify_data mismatch
f08ab18bf TLS server: Add internal callbacks get_failed, get_*_alerts
b642ab406 TLS server: More complete logging of ClientHello decode errors
fdd8a2f0b TLS client: Fix peer certificate event checking for probing
e5bffe1aa OpenSSL: Add more handshake message names to debug
21cd8f831 nl80211: Use wpa_ssid_txt() for debug messages more consistently
bbdb50146 Note HT overrides in debug log only if set
f2a6ac63e P2P: Update find_start timer only when p2p_scan is started.
c4e90da6d MBO: Move the WNM-Notification subtype definitions to common location
105b14f54 HS 2.0: Update the T&C Acceptance subtype value
65b487ae5 HS 2.0: Add QUIET=1 support for building hs20-osu-client
73f285dad Add FT-PSK to GET_CAPABILITY key_mgmt
6110753b1 nl80211: Clear PMKID add command message buffer
0fa33e05b nl80211: Clear connect command message buffer
b14e8ea1d nl80211: Request kernel to trim off payload of netlink requests from acks
789b48bb4 EAP peer: Clear temporary message buffers before freeing
8f99a3c26 Clear config item writing buffer before freeing it
a68e9b698 D-Bus: Fix P2P DeleteService dict iteration
0607346f1 D-Bus: Fix a memory leak in DeleteService handler
d05dda61d PEAP: Explicitly clear temporary keys from memory when using CMK
4e1cd3468 EAP-PEAP: Derive EMSK and use 128-octet derivation for MSK
d8c20ec59 DPP: Clear dpp_listen_freq on remain-on-channel failure
59fa20538 P2P: Allow the avoid channels for P2P discovery/negotiation
e34cd9f06 WNM: Fix WNM-Sleep Mode Request bounds checking
159a7fbde crl_reload_interval: Add CRL reloading support
83c860813 AP: Add wpa_psk_file reloading in runtime
ec5c39a55 AP: Allow identifying which passphrase station used with wpa_psk_file
b08c9ad0c AP: Expose PMK outside of wpa_auth module
89896c000 tests: Use python3 compatible print statement
bab493b90 tests: Use python3 compatible "except" statement
0dab47733 Write multi_ap_backhaul_sta to wpa_supplicant config
98251c6f2 dbus: Document more possible BSS/RSA/KeyMgmt values
1e591df06 Check supported types in wpas_mac_addr_rand_scan_set()
c85249aa1 Fix test compilation error related to sme_event_unprot_disconnect()
42d308635 SAE: Advertise Password Identifier use
59c693064 HS 2.0 server: Command line option to fetch the version information
2d1762fa4 HS 2.0 server: Alternative subrem updateNode for certificate credentials
d97cf2a11 HS 2.0 server: Use noMOUpdate in client certificate subrem
13a200a92 FILS: Remove notes about experimental implementation
86d4e0537 dbus: Expose support of SAE key management in BSS properties
Change-Id: Id507b73f1f4a2e356cbcd3bfcfb9dcd23c8fd9e0
diff --git a/hostapd/hostapd.conf b/hostapd/hostapd.conf
index a005217..ab37f03 100644
--- a/hostapd/hostapd.conf
+++ b/hostapd/hostapd.conf
@@ -438,6 +438,13 @@
wmm_ac_vo_acm=0
# Note: for IEEE 802.11b mode: cWmin=3 cWmax=4 burst=102
+# Enable Multi-AP functionality
+# 0 = disabled (default)
+# 1 = AP support backhaul BSS
+# 2 = AP support fronthaul BSS
+# 3 = AP supports both backhaul BSS and fronthaul BSS
+#multi_ap=0
+
# Static WEP key configuration
#
# The key number to use when transmitting.
@@ -794,6 +801,30 @@
# unsigned integer = duration in units of 16 us
#he_rts_threshold=0
+#he_mu_edca_qos_info_param_count
+#he_mu_edca_qos_info_q_ack
+#he_mu_edca_qos_info_queue_request=1
+#he_mu_edca_qos_info_txop_request
+#he_mu_edca_ac_be_aifsn=0
+#he_mu_edca_ac_be_ecwmin=15
+#he_mu_edca_ac_be_ecwmax=15
+#he_mu_edca_ac_be_timer=255
+#he_mu_edca_ac_bk_aifsn=0
+#he_mu_edca_ac_bk_aci=1
+#he_mu_edca_ac_bk_ecwmin=15
+#he_mu_edca_ac_bk_ecwmax=15
+#he_mu_edca_ac_bk_timer=255
+#he_mu_edca_ac_vi_ecwmin=15
+#he_mu_edca_ac_vi_ecwmax=15
+#he_mu_edca_ac_vi_aifsn=0
+#he_mu_edca_ac_vi_aci=2
+#he_mu_edca_ac_vi_timer=255
+#he_mu_edca_ac_vo_aifsn=0
+#he_mu_edca_ac_vo_aci=3
+#he_mu_edca_ac_vo_ecwmin=15
+#he_mu_edca_ac_vo_ecwmax=15
+#he_mu_edca_ac_vo_timer=255
+
##### IEEE 802.1X-2004 related configuration ##################################
# Require IEEE 802.1X authorization
@@ -891,18 +922,57 @@
# valid CRL signed by the CA is required to be included in the ca_cert file.
# This can be done by using PEM format for CA certificate and CRL and
# concatenating these into one file. Whenever CRL changes, hostapd needs to be
-# restarted to take the new CRL into use.
+# restarted to take the new CRL into use. Alternatively, crl_reload_interval can
+# be used to configure periodic updating of the loaded CRL information.
# 0 = do not verify CRLs (default)
# 1 = check the CRL of the user certificate
# 2 = check all CRLs in the certificate path
#check_crl=1
+# Specify whether to ignore certificate CRL validity time mismatches with
+# errors X509_V_ERR_CERT_HAS_EXPIRED and X509_V_ERR_CERT_NOT_YET_VALID.
+#
+# 0 = ignore errors
+# 1 = do not ignore errors (default)
+#check_crl_strict=1
+
+# CRL reload interval in seconds
+# This can be used to reload ca_cert file and the included CRL on every new TLS
+# session if difference between last reload and the current reload time in
+# seconds is greater than crl_reload_interval.
+# Note: If interval time is very short, CPU overhead may be negatively affected
+# and it is advised to not go below 300 seconds.
+# This is applicable only with check_crl values 1 and 2.
+# 0 = do not reload CRLs (default)
+# crl_reload_interval = 300
+
# TLS Session Lifetime in seconds
# This can be used to allow TLS sessions to be cached and resumed with an
# abbreviated handshake when using EAP-TLS/TTLS/PEAP.
# (default: 0 = session caching and resumption disabled)
#tls_session_lifetime=3600
+# TLS flags
+# [ALLOW-SIGN-RSA-MD5] = allow MD5-based certificate signatures (depending on
+# the TLS library, these may be disabled by default to enforce stronger
+# security)
+# [DISABLE-TIME-CHECKS] = ignore certificate validity time (this requests
+# the TLS library to accept certificates even if they are not currently
+# valid, i.e., have expired or have not yet become valid; this should be
+# used only for testing purposes)
+# [DISABLE-TLSv1.0] = disable use of TLSv1.0
+# [ENABLE-TLSv1.0] = explicitly enable use of TLSv1.0 (this allows
+# systemwide TLS policies to be overridden)
+# [DISABLE-TLSv1.1] = disable use of TLSv1.1
+# [ENABLE-TLSv1.1] = explicitly enable use of TLSv1.1 (this allows
+# systemwide TLS policies to be overridden)
+# [DISABLE-TLSv1.2] = disable use of TLSv1.2
+# [ENABLE-TLSv1.2] = explicitly enable use of TLSv1.2 (this allows
+# systemwide TLS policies to be overridden)
+# [DISABLE-TLSv1.3] = disable use of TLSv1.3
+# [ENABLE-TLSv1.3] = enable TLSv1.3 (experimental - disabled by default)
+#tls_flags=[flag1][flag2]...
+
# Cached OCSP stapling response (DER encoded)
# If set, this file is sent as a certificate status response by the EAP server
# if the EAP peer requests certificate status in the ClientHello message.
@@ -1104,8 +1174,8 @@
# Tunnel-Medium-Type (value 6 = IEEE 802), Tunnel-Private-Group-ID (value
# VLANID as a string). Optionally, the local MAC ACL list (accept_mac_file) can
# be used to set static client MAC address to VLAN ID mapping.
-# 0 = disabled (default)
-# 1 = option; use default interface if RADIUS server does not include VLAN ID
+# 0 = disabled (default); only VLAN IDs from accept_mac_file will be used
+# 1 = optional; use default interface if RADIUS server does not include VLAN ID
# 2 = required; reject authentication if RADIUS server does not include VLAN ID
#dynamic_vlan=0
@@ -1128,6 +1198,7 @@
# white space (space or tab).
# If no entries are provided by this file, the station is statically mapped
# to <bss-iface>.<vlan-id> interfaces.
+# Each line can optionally also contain the name of a bridge to add the VLAN to
#vlan_file=/etc/hostapd.vlan
# Interface where 802.1q tagged packets should appear when a RADIUS server is
@@ -1418,6 +1489,13 @@
# dot11AssociationSAQueryRetryTimeout, 1...4294967295
#assoc_sa_query_retry_timeout=201
+# ocv: Operating Channel Validation
+# This is a countermeasure against multi-channel man-in-the-middle attacks.
+# Enabling this automatically also enables ieee80211w, if not yet enabled.
+# 0 = disabled (default)
+# 1 = enabled
+#ocv=1
+
# disable_pmksa_caching: Disable PMKSA caching
# This parameter can be used to disable caching of PMKSA created through EAP
# authentication. RSN preauthentication may still end up using PMKSA caching if
@@ -2273,6 +2351,21 @@
# Default is 0 = OCE disabled
#oce=0
+# RSSI-based assocition rejection
+#
+# Reject STA association if RSSI is below given threshold (in dBm)
+# Allowed range: -60 to -90 dBm; default = 0 (rejection disabled)
+# Note: This rejection happens based on a signal strength detected while
+# receiving a single frame and as such, there is significant risk of the value
+# not being accurate and this resulting in valid stations being rejected. As
+# such, this functionality is not recommended to be used for purposes other than
+# testing.
+#rssi_reject_assoc_rssi=-75
+#
+# Association retry delay in seconds allowed by the STA if RSSI has not met the
+# threshold (range: 0..255, default=30).
+#rssi_reject_assoc_timeout=30
+
##### Fast Session Transfer (FST) support #####################################
#
# The options in this section are only available when the build configuration