diff --git a/hostapd/hostapd.conf b/hostapd/hostapd.conf
index a005217..ab37f03 100644
--- a/hostapd/hostapd.conf
+++ b/hostapd/hostapd.conf
@@ -438,6 +438,13 @@
 wmm_ac_vo_acm=0
 # Note: for IEEE 802.11b mode: cWmin=3 cWmax=4 burst=102
 
+# Enable Multi-AP functionality
+# 0 = disabled (default)
+# 1 = AP support backhaul BSS
+# 2 = AP support fronthaul BSS
+# 3 = AP supports both backhaul BSS and fronthaul BSS
+#multi_ap=0
+
 # Static WEP key configuration
 #
 # The key number to use when transmitting.
@@ -794,6 +801,30 @@
 # unsigned integer = duration in units of 16 us
 #he_rts_threshold=0
 
+#he_mu_edca_qos_info_param_count
+#he_mu_edca_qos_info_q_ack
+#he_mu_edca_qos_info_queue_request=1
+#he_mu_edca_qos_info_txop_request
+#he_mu_edca_ac_be_aifsn=0
+#he_mu_edca_ac_be_ecwmin=15
+#he_mu_edca_ac_be_ecwmax=15
+#he_mu_edca_ac_be_timer=255
+#he_mu_edca_ac_bk_aifsn=0
+#he_mu_edca_ac_bk_aci=1
+#he_mu_edca_ac_bk_ecwmin=15
+#he_mu_edca_ac_bk_ecwmax=15
+#he_mu_edca_ac_bk_timer=255
+#he_mu_edca_ac_vi_ecwmin=15
+#he_mu_edca_ac_vi_ecwmax=15
+#he_mu_edca_ac_vi_aifsn=0
+#he_mu_edca_ac_vi_aci=2
+#he_mu_edca_ac_vi_timer=255
+#he_mu_edca_ac_vo_aifsn=0
+#he_mu_edca_ac_vo_aci=3
+#he_mu_edca_ac_vo_ecwmin=15
+#he_mu_edca_ac_vo_ecwmax=15
+#he_mu_edca_ac_vo_timer=255
+
 ##### IEEE 802.1X-2004 related configuration ##################################
 
 # Require IEEE 802.1X authorization
@@ -891,18 +922,57 @@
 # valid CRL signed by the CA is required to be included in the ca_cert file.
 # This can be done by using PEM format for CA certificate and CRL and
 # concatenating these into one file. Whenever CRL changes, hostapd needs to be
-# restarted to take the new CRL into use.
+# restarted to take the new CRL into use. Alternatively, crl_reload_interval can
+# be used to configure periodic updating of the loaded CRL information.
 # 0 = do not verify CRLs (default)
 # 1 = check the CRL of the user certificate
 # 2 = check all CRLs in the certificate path
 #check_crl=1
 
+# Specify whether to ignore certificate CRL validity time mismatches with
+# errors X509_V_ERR_CERT_HAS_EXPIRED and X509_V_ERR_CERT_NOT_YET_VALID.
+#
+# 0 = ignore errors
+# 1 = do not ignore errors (default)
+#check_crl_strict=1
+
+# CRL reload interval in seconds
+# This can be used to reload ca_cert file and the included CRL on every new TLS
+# session if difference between last reload and the current reload time in
+# seconds is greater than crl_reload_interval.
+# Note: If interval time is very short, CPU overhead may be negatively affected
+# and it is advised to not go below 300 seconds.
+# This is applicable only with check_crl values 1 and 2.
+# 0 = do not reload CRLs (default)
+# crl_reload_interval = 300
+
 # TLS Session Lifetime in seconds
 # This can be used to allow TLS sessions to be cached and resumed with an
 # abbreviated handshake when using EAP-TLS/TTLS/PEAP.
 # (default: 0 = session caching and resumption disabled)
 #tls_session_lifetime=3600
 
+# TLS flags
+# [ALLOW-SIGN-RSA-MD5] = allow MD5-based certificate signatures (depending on
+#	the TLS library, these may be disabled by default to enforce stronger
+#	security)
+# [DISABLE-TIME-CHECKS] = ignore certificate validity time (this requests
+#	the TLS library to accept certificates even if they are not currently
+#	valid, i.e., have expired or have not yet become valid; this should be
+#	used only for testing purposes)
+# [DISABLE-TLSv1.0] = disable use of TLSv1.0
+# [ENABLE-TLSv1.0] = explicitly enable use of TLSv1.0 (this allows
+#	systemwide TLS policies to be overridden)
+# [DISABLE-TLSv1.1] = disable use of TLSv1.1
+# [ENABLE-TLSv1.1] = explicitly enable use of TLSv1.1 (this allows
+#	systemwide TLS policies to be overridden)
+# [DISABLE-TLSv1.2] = disable use of TLSv1.2
+# [ENABLE-TLSv1.2] = explicitly enable use of TLSv1.2 (this allows
+#	systemwide TLS policies to be overridden)
+# [DISABLE-TLSv1.3] = disable use of TLSv1.3
+# [ENABLE-TLSv1.3] = enable TLSv1.3 (experimental - disabled by default)
+#tls_flags=[flag1][flag2]...
+
 # Cached OCSP stapling response (DER encoded)
 # If set, this file is sent as a certificate status response by the EAP server
 # if the EAP peer requests certificate status in the ClientHello message.
@@ -1104,8 +1174,8 @@
 # Tunnel-Medium-Type (value 6 = IEEE 802), Tunnel-Private-Group-ID (value
 # VLANID as a string). Optionally, the local MAC ACL list (accept_mac_file) can
 # be used to set static client MAC address to VLAN ID mapping.
-# 0 = disabled (default)
-# 1 = option; use default interface if RADIUS server does not include VLAN ID
+# 0 = disabled (default); only VLAN IDs from accept_mac_file will be used
+# 1 = optional; use default interface if RADIUS server does not include VLAN ID
 # 2 = required; reject authentication if RADIUS server does not include VLAN ID
 #dynamic_vlan=0
 
@@ -1128,6 +1198,7 @@
 # white space (space or tab).
 # If no entries are provided by this file, the station is statically mapped
 # to <bss-iface>.<vlan-id> interfaces.
+# Each line can optionally also contain the name of a bridge to add the VLAN to
 #vlan_file=/etc/hostapd.vlan
 
 # Interface where 802.1q tagged packets should appear when a RADIUS server is
@@ -1418,6 +1489,13 @@
 # dot11AssociationSAQueryRetryTimeout, 1...4294967295
 #assoc_sa_query_retry_timeout=201
 
+# ocv: Operating Channel Validation
+# This is a countermeasure against multi-channel man-in-the-middle attacks.
+# Enabling this automatically also enables ieee80211w, if not yet enabled.
+# 0 = disabled (default)
+# 1 = enabled
+#ocv=1
+
 # disable_pmksa_caching: Disable PMKSA caching
 # This parameter can be used to disable caching of PMKSA created through EAP
 # authentication. RSN preauthentication may still end up using PMKSA caching if
@@ -2273,6 +2351,21 @@
 # Default is 0 = OCE disabled
 #oce=0
 
+# RSSI-based assocition rejection
+#
+# Reject STA association if RSSI is below given threshold (in dBm)
+# Allowed range: -60 to -90 dBm; default = 0 (rejection disabled)
+# Note: This rejection happens based on a signal strength detected while
+# receiving a single frame and as such, there is significant risk of the value
+# not being accurate and this resulting in valid stations being rejected. As
+# such, this functionality is not recommended to be used for purposes other than
+# testing.
+#rssi_reject_assoc_rssi=-75
+#
+# Association retry delay in seconds allowed by the STA if RSSI has not met the
+# threshold (range: 0..255, default=30).
+#rssi_reject_assoc_timeout=30
+
 ##### Fast Session Transfer (FST) support #####################################
 #
 # The options in this section are only available when the build configuration