runtime/doc/various.txt

*various.txt*   For Vim version 7.0aa.  Last change: 2005 Apr 01


		  VIM REFERENCE MANUAL    by Bram Moolenaar


Various commands					*various*

1. Various commands		|various-cmds|
2. Online help			|online-help|
3. Using Vim like less or more	|less|

==============================================================================
1. Various commands					*various-cmds*

							*CTRL-L*
CTRL-L			Clear and redraw the screen (later).

							*:redr* *:redraw*
:redr[aw][!]		Redraw the screen right now.  When ! is included it is
			cleared first.
			Useful to update the screen halfway executing a script
			or function.  Also when halfway a mapping and
			'lazyredraw' is set.

						*:redraws* *:redrawstatus*
:redraws[tatus][!]	Redraw the status line of the current window.  When !
			is included all status lines are redrawn.
			Useful to update the status line(s) when 'statusline'
			includes an item that doesn't cause automatic
			updating.

							*N<Del>*
<Del>			When entering a number: Remove the last digit.
			Note: if you like to use <BS> for this, add this
			mapping to your .vimrc: >
				:map CTRL-V <BS>   CTRL-V <Del>
<			See |:fixdel| if your <Del> key does not do what you
			want.

:as[cii]	or					*ga* *:as* *:ascii*
ga			Print the ascii value of the character under the
			cursor in decimal, hexadecimal and octal.  For
			example, when the cursor is on a 'R':
				<R>  82,  Hex 52,  Octal 122 ~
			When the character is a non-standard ASCII character,
			but printable according to the 'isprint' option, the
			non-printable version is also given.  When the
			character is larger than 127, the <M-x> form is also
			printed.  For example:
				<~A>  <M-^A>  129,  Hex 81,  Octal 201 ~
				<p>  <|~>  <M-~>  254,  Hex fe,  Octal 376 ~
			(where <p> is a special character)
			The <Nul> character in a file is stored internally as
			<NL>, but it will be shown as:
				<^@>  0,  Hex 00,  Octal 000 ~
			Mnemonic: Get Ascii value.  {not in Vi}

							*g8*
g8			Print the hex values of the bytes used in the
			character under the cursor, assuming it is in |UTF-8|
			encoding.  This also shows composing characters.
			Example of a character with three composing
			characters:
				e0 b8 81 + e0 b8 b9 + e0 b9 89 ~
			{not in Vi}

							*:p* *:pr* *:print*
:[range]p[rint] [flags]
			Print [range] lines (default current line).
			Note: If you are looking for a way to print your text
			on paper see |:hardcopy|.  In the GUI you can use the
			File.Print menu entry.
			See |ex-flags| for [flags].

:[range]p[rint] {count} [flags]
			Print {count} lines, starting with [range] (default
			current line |cmdline-ranges|).
			See |ex-flags| for [flags].

							*:P* *:Print*
:[range]P[rint] [count] [flags]
			Just as ":print".  Was apparently added to Vi for
			people that keep the shift key pressed too long...
			See |ex-flags| for [flags].

							*:l* *:list*
:[range]l[ist] [count] [flags]
			Same as :print, but display unprintable characters
			with '^' and put $ after the line.
			See |ex-flags| for [flags].

							*:nu* *:number*
:[range]nu[mber] [count] [flags]
			Same as :print, but precede each line with its line
			number.  (See also 'highlight' option).
			See |ex-flags| for [flags].

							*:#*
:[range]# [count] [flags]
			synonym for :number.

							*:z* *E144*
:{range}z[+-^.=]{count}	Display several lines of text surrounding the line
			specified with {range}, or around the current line
			if there is no {range}.  If there is a {count}, that's
			how many lines you'll see; if there is only one window
			then the 'window' option is used, otherwise the
			current window size is used.

			:z can be used either alone or followed by any of
			several punctuation marks.  These have the following
			effect:

			mark   first line    last line      new location   ~
			----   ----------    ---------      ------------
			+      current line  1 scr forward  1 scr forward
			-      1 scr back    current line   current line
			^      2 scr back    1 scr back     1 scr back
			.      1/2 scr back  1/2 scr fwd    1/2 scr fwd
			=      1/2 scr back  1/2 scr fwd    current line

			Specifying no mark at all is the same as "+".
			If the mark is "=", a line of dashes is printed
			around the current line.

:{range}z#[+-^.=]{count}				*:z#*
			Like ":z", but number the lines.
			{not in all versions of Vi, not with these arguments}

							*:=*
:= [flags]		Print the last line number.
			See |ex-flags| for [flags].

:{range}= [flags]	Prints the last line number in {range}.  For example,
			this prints the current line number: >
				:.=
<			See |ex-flags| for [flags].

:norm[al][!] {commands}					*:norm* *:normal*
			Execute Normal mode commands {commands}.  This makes
			it possible to execute Normal mode commands typed on
			the command-line.  {commands} is executed like it is
			typed.  For undo all commands are undone together.
			If the [!] is given, mappings will not be used.
			{commands} should be a complete command.  If
			{commands} does not finish a command, the last one
			will be aborted as if <Esc> or <C-C> was typed.
			The display isn't updated while ":normal" is busy.
			This implies that an insert command must be completed
			(to start Insert mode, see |:startinsert|).  A ":"
			command must be completed as well.  And you can't use
			"Q" or "gQ" to start Ex mode.
			{commands} cannot start with a space.  Put a 1 (one)
			before it, 1 space is one space.
			The 'insertmode' option is ignored for {commands}.
			This command cannot be followed by another command,
			since any '|' is considered part of the command.
			This command can be used recursively, but the depth is
			limited by 'maxmapdepth'.
			When this command is called from a non-remappable
			mapping |:noremap|, the argument can be mapped anyway.
			An alternative is to use |:execute|, which uses an
			expression as argument.  This allows the use of
			printable characters.  Example: >
				:exe "normal \<c-w>\<c-w>"
<			{not in Vi, of course}
			{not available when the |+ex_extra| feature was
			disabled at compile time}

:{range}norm[al][!] {commands}				*:normal-range*
			Execute Normal mode commands {commands} for each line
			in the {range}.  Before executing the {commands}, the
			cursor is positioned in the first column of the range,
			for each line.  Otherwise it's the same as the
			":normal" command without a range.
			{not in Vi}
			Not available when |+ex_extra| feature was disabled at
			compile time.

							*:sh* *:shell* *E371*
:sh[ell]		This command starts a shell.  When the shell exits
			(after the "exit" command) you return to Vim.  The
			name for the shell command comes from 'shell' option.
							*E360*
			Note: This doesn't work when Vim on the Amiga was
			started in QuickFix mode from a compiler, because the
			compiler will have set stdin to a non-interactive
			mode.

							*:!cmd* *:!* *E34*
:!{cmd}			Execute {cmd} with the shell.  See also the 'shell'
			and 'shelltype' option.
			Any '!' in {cmd} is replaced with the previous
			external command (see also 'cpoptions').  But not when
			there is a backslash before the '!', then that
			backslash is removed.  Example: ":!ls" followed by
			":!echo ! \! \\!" executes "echo ls ! \!".
			After the command has been executed, the timestamp of
			the current file is checked |timestamp|.
			There cannot be a '|' in {cmd}, see |:bar|.
			A newline character ends {cmd}, what follows is
			interpreted as a following ":" command.  However, if
			there is a backslash before the newline it is removed
			and {cmd} continues.  It doesn't matter how many
			backslashes are before the newline, only one is
			removed.
			On Unix the command normally runs in a non-interactive
			shell.  If you want an interactive shell to be used
			(to use aliases) set 'shellcmdflag' to "-ic".
			For Win32 also see |:!start|.
			Vim redraws the screen after the command is finished,
			because it may have printed any text.  This requires a
			hit-enter prompt, so that you can read any messages.
			To avoid this use: >
				:silent !{cmd}
<			The screen is not redrawn then, thus you have to use
			CTRL-L or ":redraw!" if the command did display
			something.
			Also see |shell-window|.

							*:!!*
:!!			Repeat last ":!{cmd}".

							*:ve* *:version*
:ve[rsion]		Print the version number of the editor.  If the
			compiler used understands "__DATE__" the compilation
			date is mentioned.  Otherwise a fixed release-date is
			shown.
			The following lines contain information about which
			features were enabled when Vim was compiled.  When
			there is a preceding '+', the feature is included,
			when there is a '-' it is excluded.  To change this,
			you have to edit feature.h and recompile Vim.
			To check for this in an expression, see |has()|.
			Here is an overview of the features.
			The first column shows the smallest version in which
			they are included:
			   T	tiny
			   S	small
			   N	normal
			   B	big
			   H	huge
			   m	manually enabled or depends on other features
			 (none) system dependent
			Thus if a feature is marked with "N", it is included
			in the normal, big and huge versions of Vim.

							*+feature-list*
   *+ARP*		Amiga only: ARP support included
B  *+arabic*		|Arabic| language support
N  *+autocmd*		|:autocmd|, automatic commands
m  *+balloon_eval*	|balloon-eval| support. Included when compiling with
			supported GUI (Motif, GTK, GUI) and either
			Netbeans/Sun Workshop integration or |+eval| feature.
N  *+browse*		|:browse| command
N  *+builtin_terms*	some terminals builtin |builtin-terms|
B  *++builtin_terms*	maximal terminals builtin |builtin-terms|
N  *+byte_offset*	support for 'o' flag in 'statusline' option, "go"
			and ":goto" commands.
N  *+cindent*		|'cindent'|, C indenting
N  *+clientserver*	Unix and Win32: Remote invocation |clientserver|
   *+clipboard*		|clipboard| support
N  *+cmdline_compl*	command line completion |cmdline-completion|
N  *+cmdline_hist*	command line history |cmdline-history|
N  *+cmdline_info*	|'showcmd'| and |'ruler'|
N  *+comments*		|'comments'| support
N  *+cryptv*		encryption support |encryption|
B  *+cscope*		|cscope| support
N  *+dialog_gui*	Support for |:confirm| with GUI dialog.
N  *+dialog_con*	Support for |:confirm| with console dialog.
N  *+dialog_con_gui*	Support for |:confirm| with GUI and console dialog.
N  *+diff*		|vimdiff| and 'diff'
N  *+digraphs*		|digraphs| *E196*
   *+dnd*		Support for DnD into the "~ register |quote_~|.
B  *+emacs_tags*	|emacs-tags| files
N  *+eval*		expression evaluation |eval.txt|
N  *+ex_extra*		Vim's extra Ex commands: |:center|, |:left|,
			|:normal|, |:retab| and |:right|
N  *+extra_search*	|'hlsearch'| and |'incsearch'| options.
B  *+farsi*		|farsi| language
N  *+file_in_path*	|gf|, |CTRL-W_f| and |<cfile>|
N  *+find_in_path*	include file searches: |[I|, |:isearch|,
			|CTRL-W_CTRL-I|, |:checkpath|, etc.
N  *+folding*		|folding|
   *+footer*		|gui-footer|
   *+fork*		Unix only: |fork| shell commands
N  *+gettext*		message translations |multi-lang|
   *+GUI_Athena*	Unix only: Athena |GUI|
   *+GUI_neXtaw*	Unix only: neXtaw |GUI|
   *+GUI_BeOS*		BeOS only: BeOS |GUI|
   *+GUI_GTK*		Unix only: GTK+ |GUI|
   *+GUI_Motif*		Unix only: Motif |GUI|
   *+GUI_Photon*	QNX only:  Photon |GUI|
m  *+hangul_input*	Hangul input support |hangul|
   *+iconv*		Compiled with the |iconv()| function, may have |/dyn|
N  *+insert_expand*	|insert_expand| Insert mode completion
N  *+jumplist*		|jumplist|
B  *+keymap*		|'keymap'|
B  *+langmap*		|'langmap'|
N  *+libcall*		|libcall()|
N  *+linebreak*		|'linebreak'|, |'breakat'| and |'showbreak'|
N  *+lispindent*	|'lisp'|
N  *+listcmds*		Vim commands for the list of buffers |buffer-hidden|
			and argument list |:argdelete|
N  *+localmap*		Support for mappings local to a buffer |:map-local|
N  *+menu*		|:menu|
N  *+mksession*		|:mksession|
N  *+modify_fname*	|filename-modifiers|
N  *+mouse*		Mouse handling |mouse-using|
N  *+mouseshape*	|'mouseshape'|
B  *+mouse_dec*		Unix only: Dec terminal mouse handling |dec-mouse|
N  *+mouse_gpm*		Unix only: Linux console mouse handling |gpm-mouse|
B  *+mouse_netterm*	Unix only: netterm mouse handling |netterm-mouse|
N  *+mouse_pterm*	QNX only: pterm mouse handling |qnx-terminal|
N  *+mouse_xterm*	Unix only: xterm mouse handling |xterm-mouse|
B  *+multi_byte*	Korean and other languages |multibyte|
   *+multi_byte_ime*	Win32 input method for multibyte chars |multibyte-ime|
N  *+multi_lang*	non-English language support |multi-lang|
m  *+mzscheme*		Mzscheme interface |mzscheme|
m  *+netbeans_intg*	|netbeans|
m  *+ole*		Win32 GUI only: |ole-interface|
   *+osfiletype*	Support for the 'osfiletype' option and filetype
			checking in automatic commands.  |autocmd-osfiletypes|
N  *+path_extra*	Up/downwards search in 'path' and 'tags'
m  *+perl*		Perl interface |perl|, may have |/dyn|
   *+postscript*	|:hardcopy| writes a PostScript file
N  *+printer*		|:hardcopy| command
H  *+profile*		|:profile| command
m  *+python*		Python interface |python|, may have |/dyn|
N  *+quickfix*		|:make| and |quickfix| commands
B  *+rightleft*		Right to left typing |'rightleft'|
m  *+ruby*		Ruby interface |ruby|, may have |/dyn|
N  *+scrollbind*	|'scrollbind'|
B  *+signs*		|:sign|
N  *+smartindent*	|'smartindent'|
m  *+sniff*		SniFF interface |sniff|
N  *+statusline*	Options 'statusline', 'rulerformat' and special
			formats of 'titlestring' and 'iconstring'
m  *+sun_workshop*	|workshop|
N  *+syntax*		Syntax highlighting |syntax|
   *+system()*		Unix only: opposite of |+fork|
N  *+tag_binary*	binary searching in tags file |tag-binary-search|
N  *+tag_old_static*	old method for static tags |tag-old-static|
m  *+tag_any_white*	any white space allowed in tags file |tag-any-white|
m  *+tcl*		Tcl interface |tcl|, may have |/dyn|
   *+terminfo*		uses |terminfo| instead of termcap
N  *+termresponse*	support for |t_RV| and |v:termresponse|
N  *+textobjects*	|text-objects| selection
   *+tgetent*		non-Unix only: able to use external termcap
N  *+title*		Setting the window title |'title'|
N  *+toolbar*		|gui-toolbar|
N  *+user_commands*	User-defined commands. |user-commands|
N  *+viminfo*		|'viminfo'|
N  *+vertsplit*		Vertically split windows |:vsplit|
N  *+virtualedit*	|'virtualedit'|
S  *+visual*		Visual mode |Visual-mode|
N  *+visualextra*	extra Visual mode commands |blockwise-operators|
N  *+vreplace*		|gR| and |gr|
N  *+wildignore*	|'wildignore'|
N  *+wildmenu*		|'wildmenu'|
S  *+windows*		more than one window
m  *+writebackup*	|'writebackup'| is default on
m  *+xim*		X input method |xim|
   *+xfontset*		X fontset support |xfontset|
   *+xsmp*		XSMP (X session management) support
   *+xsmp_interact*	interactive XSMP (X session management) support
N  *+xterm_clipboard*	Unix only: xterm clipboard handling
m  *+xterm_save*	save and restore xterm screen |xterm-screens|
N  *+X11*		Unix only: can restore window title |X11|

							*/dyn* *E370* *E448*
			To some of the features "/dyn" is added when the
			feature is only available when the related library can
			be dynamically loaded.

:ve[rsion] {nr}		Is now ignored.  This was previously used to check the
			version number of a .vimrc file.  It was removed,
			because you can now use the ":if" command for
			version-dependent behavior.  {not in Vi}

							*:redi* *:redir*
:redi[r][!] > {file}	Redirect messages to file {file}.  The messages which
			are the output of commands are written to that file,
			until redirection ends.  The messages are also still
			shown on the screen.  When [!] is included, an
			existing file is overwritten.  When [!] is omitted,
			and {file} exists, this command fails.
			Only one ":redir" can be active at a time.  Calls to
			":redir" will close any active redirection before
			starting redirection to the new target.
			To stop the messages and commands from being echoed to
			the screen, put the commands in a function and call it
			with ":silent call Function()".
			{not in Vi}

:redi[r] >> {file}	Redirect messages to file {file}.  Append if {file}
			already exists.  {not in Vi}

:redi[r] @{a-zA-Z}	Redirect messages to register {a-z}.  Append to the
			contents of the register if its name is given
			uppercase {A-Z}.  {not in Vi}
:redi[r] @{a-z}>>	Append messages to register {a-z}. {not in Vi}

:redi[r] @*		Redirect messages to the clipboard. {not in Vi}
:redi[r] @*>>		Append messages to the clipboard. {not in Vi}

:redi[r] @"		Redirect messages to the unnamed register. {not in Vi}
:redi[r] @">>		Append messages to the unnamed register. {not in Vi}

:redi[r] => {var}	Redirect messages to a variable.  If the variable
			doesn't exist, then it is created.  If the variable
			exists, then it is initialized to an empty string.
			Only string variables can be used.  After the
			redirection starts, if the variable is removed or
			locked or the variable type is changed, then further
			command output messages will cause errors. {not in Vi}

:redi[r] =>> {var}	Append messages to an existing variable.  Only string
			variables can be used. {not in Vi}

:redi[r] END		End redirecting messages.  {not in Vi}

						*:sil* *:silent*
:sil[ent][!] {command}	Execute {command} silently.  Normal messages will not
			be given or added to the message history.
			When [!] is added, error messages will also be
			skipped, and commands and mappings will not be aborted
			when an error is detected.  |v:errmsg| is still set.
			When [!] is not used, an error message will cause
			further messages to be displayed normally.
			Redirection, started with |:redir|, will continue as
			usual, although there might be small differences.
			This will allow redirecting the output of a command
			without seeing it on the screen.  Example: >
			    :redir >/tmp/foobar
			    :silent g/Aap/p
			    :redir END
<			To execute a Normal mode command silently, use the
			|:normal| command.  For example, to search for a
			string without messages: >
			    :silent exe "normal /path\<CR>"
<			":silent!" is useful to execute a command that may
			fail, but the failure is to be ignored.  Example: >
			    :let v:errmsg = ""
			    :silent! /^begin
			    :if v:errmsg != ""
			    : ... pattern was not found
<			":silent" will also avoid the hit-enter prompt.  When
			using this for an external command, this may cause the
			screen to be messed up.  Use |CTRL-L| to clean it up
			then.
			":silent menu ..." defines a menu that will not echo a
			Command-line command.  The command will still produce
			messages though.  Use ":silent" in the command itself
			to avoid that: ":silent menu .... :silent command".

						*:verb* *:verbose*
:[count]verb[ose] {command}
			Execute {command} with 'verbose' set to [count].  If
			[count] is omitted one is used. ":0verbose" can be
			used to set 'verbose' to zero.
			The additional use of ":silent" makes messages
			generated but not displayed.
			The combination of ":silent" and ":verbose" can be
			used to generate messages and check them with
			|v:statusmsg| and friends.  For example: >
				:let v:statusmsg = ""
				:silent verbose runtime foobar.vim
				:if v:statusmsg != ""
				:  " foobar.vim could not be found
				:endif
<			When concatenating another command, the ":verbose"
			only applies to the first one: >
				:4verbose set verbose | set verbose
<				  verbose=4 ~
				  verbose=0 ~

							*K*
K			Run a program to lookup the keyword under the
			cursor.  The name of the program is given with the
			'keywordprg' (kp) option (default is "man").  The
			keyword is formed of letters, numbers and the
			characters in 'iskeyword'.  The keyword under or
			right of the cursor is used.  The same can be done
			with the command >
				:!{program} {keyword}
<			There is an example of a program to use in the tools
			directory of Vim.  It is called 'ref' and does a
			simple spelling check.
			Special cases:
			- If 'keywordprg' is empty, the ":help" command is
			  used.  It's a good idea to include more characters
			  in 'iskeyword' then, to be able to find more help.
			- When 'keywordprg' is equal to "man", a count before
			  "K" is inserted after the "man" command and before
			  the keyword.  For example, using "2K" while the
			  cursor is on "mkdir", results in: >
				!man 2 mkdir
<			- When 'keywordprg' is equal to "man -s", a count
			  before "K" is inserted after the "-s".  If there is
			  no count, the "-s" is removed.
			{not in Vi}

							*v_K*
{Visual}K		Like "K", but use the visually highlighted text for
			the keyword.  Only works when the highlighted text is
			not more than one line.  {not in Vi}

[N]gs							*gs* *:sl* *:sleep*
:[N]sl[eep] [N]	[m]	Do nothing for [N] seconds.  When [m] is included,
			sleep for [N] milliseconds.  The count for "gs" always
			uses seconds.  The default is one second. >
			     :sleep	     "sleep for one second
			     :5sleep	     "sleep for five seconds
			     :sleep 100m     "sleep for a hundred milliseconds
			     10gs	     "sleep for ten seconds
<			Can be interrupted with CTRL-C (CTRL-Break on MS-DOS).
			"gs" stands for "goto sleep".
			While sleeping the cursor is positioned in the text,
			if at a visible position.  {not in Vi}

							*g_CTRL-A*
g CTRL-A		Only when Vim was compiled with MEM_PROFILING defined
			(which is very rare): print memory usage statistics.
			Only useful for debugging Vim.

==============================================================================
2. Online help						*online-help*

			*help* *<Help>* *:h* *:help* *<F1>* *i_<F1>* *i_<Help>*
<Help>		or
:h[elp]			Open a window and display the help file in read-only
			mode.  If there is a help window open already, use
			that one.  Otherwise, if the current window uses the
			full width of the screen or is at least 80 characters
			wide, the help window will appear just above the
			current window.  Otherwise the new window is put at
			the very top.
			The 'helplang' option is used to select a language, if
			the main help file is available in several languages.
			{not in Vi}

						*{subject}* *E149* *E661*
:h[elp] {subject}	Like ":help", additionally jump to the tag {subject}.
			{subject} can include wildcards like "*", "?" and
			"[a-z]":
			   :help z?	jump to help for any "z" command
			   :help z.	jump to the help for "z."
			If there is no full match for the pattern, or there
			are several matches, the "best" match will be used.
			A sophisticated algorithm is used to decide which
			match is better than another one.  These items are
			considered in the computation:
			- A match with same case is much better than a match
			  with different case.
			- A match that starts after a non-alphanumeric
			  character is better than a match in the middle of a
			  word.
			- A match at or near the beginning of the tag is
			  better than a match further on.
			- The more alphanumeric characters match, the better.
			- The shorter the length of the match, the better.

			The 'helplang' option is used to select a language, if
			the {subject} is available in several languages.
			To find a tag in a specific language, append "@ab",
			where "ab" is the two-letter language code.  See
			|help-translated|.

			Note that the longer the {subject} you give, the less
			matches will be found.  You can get an idea how this
			all works by using commandline completion (type CTRL-D
			after ":help subject").
			If there are several matches, you can have them listed
			by hitting CTRL-D.  Example: >
				:help cont<Ctrl-D>
<			To use a regexp |pattern|, first do ":help" and then
			use ":tag {pattern}" in the help window.  The
			":tnext" command can then be used to jump to other
			matches, "tselect" to list matches and choose one. >
				:help index| :tse z.
<			This command can be followed by '|' and another
			command, but you don't need to escape the '|' inside a
			help command.  So these both work: >
				:help |
				:help k| only
<			Note that a space before the '|' is seen as part of
			the ":help" argument.
			You can also use <LF> or <CR> to separate the help
			command from a following command.  You need to type
			CTRL-V first to insert the <LF> or <CR>.  Example: >
				:help so<C-V><CR>only
<			{not in Vi}

:h[elp]! [subject]	Like ":help", but in non-English help files prefer to
			find a tag in a file with the same language as the
			current file.  See |help-translated|.

							*:helpg* *:helpgrep*
:helpg[rep] {pattern}[@xx]
			Search all help text files and make a list of lines
			in which {pattern} matches.  Jumps to the first match.
			The optional [@xx] specifies that only matches in the
			"xx" language are to be found.
			You can navigate through the matches with the
			|quickfix| commands, e.g., |:cnext| to jump to the
			next one.  Or use |:cwindow| to get the list of
			matches in the quickfix window.
			{pattern} is used as a Vim regexp |pattern|.
			'ignorecase' is not used, add "\c" to ignore case.
			Example for case sensitive search: >
				:helpgrep Uganda
<			Example for case ignoring search: >
				:helpgrep uganda\c
<			Example for searching in French help: >
				:helpgrep backspace@fr
<			Cannot be followed by another command, everything is
			used as part of the pattern.  But you can use
			|:execute| when needed.
			Compressed help files will not be searched (Debian
			compresses the help files).
			{not in Vi}

							*:exu* *:exusage*
:exu[sage]		Show help on Ex commands.  Added to simulate the Nvi
			command. {not in Vi}

							*:viu* *:viusage*
:viu[sage]		Show help on Normal mode commands.  Added to simulate
			the Nvi command. {not in Vi}

When no argument is given to |:help| the file given with the 'helpfile' option
will be opened.  Otherwise the specified tag is searched for in all "doc/tags"
files in the directories specified in the 'runtimepath' option.

The initial height of the help window can be set with the 'helpheight' option
(default 20).

Jump to specific subjects by using tags.  This can be done in two ways:
- Use the "CTRL-]" command while standing on the name of a command or option.
  This only works when the tag is a keyword.  "<C-Leftmouse>" and
  "g<LeftMouse>" work just like "CTRL-]".
- use the ":ta {subject}" command.  This also works with non-keyword
  characters.

Use CTRL-T or CTRL-O to jump back.
Use ":q" to close the help window.

If there are several matches for an item you are looking for, this is how you
can jump to each one of them:
1. Open a help window
2. Use the ":tag" command with a slash prepended to the tag.  E.g.: >
	:tag /min
3. Use ":tnext" to jump to the next matching tag.

It is possible to add help files for plugins and other items.  You don't need
to change the distributed help files for that.  See |add-local-help|.

To write a local help file, see |write-local-help|.

Note that the title lines from the local help files are automagically added to
the "LOCAL ADDITIONS" section in the "help.txt" help file |local-additions|.
This is done when viewing the file in Vim, the file itself is not changed.  It
is done by going through all help files and obtaining the first line of each
file.  The files in $VIMRUNTIME/doc are skipped.

							*help-xterm-window*
If you want to have the help in another xterm window, you could use this
command: >
	:!xterm -e vim +help &
<

			*:helpfind* *:helpf*
:helpf[ind]		Like |:help|, but use a dialog to enter the argument.
			Only for backwards compatibility.  It now executes the
			ToolBar.FindHelp menu entry instead of using a builtin
			dialog.  {only when compiled with |+GUI_GTK|}
<			{not in Vi}

					*:helpt* *:helptags*
				*E154* *E150* *E151* *E152* *E153* *E670*
:helpt[ags] {dir}	Generate the help tags file(s) for directory {dir}.
			All "*.txt" and "*.??x" files in the directory are
			scanned for a help tag definition in between stars.
			The "*.??x" files are for translated docs, they
			generate the "tags-??" file, see |help-translated|.
			The generated tags files are sorted.
			When there are duplicates an error message is given.
			An existing tags file is silently overwritten.
			To rebuild the help tags in the runtime directory
			(requires write permission there): >
				:helptags $VIMRUNTIME/doc
<			{not in Vi}


TRANSLATED HELP						*help-translated*

It is possible to add translated help files, next to the original English help
files.  Vim will search for all help in "doc" directories in 'runtimepath'.
This is only available when compiled with the |+multi_lang| feature.

A set of translated help files consists of these files:

	help.abx
	howto.abx
	...
	tags-ab

"ab" is the two-letter language code.  Thus for Italian the names are:

	help.itx
	howto.itx
	...
	tags-it

The 'helplang' option can be set to the preferred language(s).  The default is
set according to the environment.  Vim will first try to find a matching tag
in the preferred language(s).  English is used when it cannot be found.

To find a tag in a specific language, append "@ab" to a tag, where "ab" is the
two-letter language code.  Example: >
	:he user-manual@it
	:he user-manual@en
The first one finds the Italian user manual, even when 'helplang' is empty.
The second one finds the English user manual, even when 'helplang' is set to
"it".

When using command-line completion for the ":help" command, the "@en"
extention is only shown when a tag exists for multiple languages.  When the
tag only exists for English "@en" is omitted.

When using |CTRL-]| or ":help!" in a non-English help file Vim will try to
find the tag in the same language.  If not found then 'helplang' will be used
to select a language.

Help files must use latin1 or utf-8 encoding.  Vim assumes the encoding is
utf-8 when finding non-ASCII characters in the first line.  Thus you must
translate the header with "For Vim version".

The same encoding must be used for the help files of one language in one
directory.  You can use a different encoding for different languages and use
a different encoding for help files of the same language but in a different
directory.

Hints for translators:
- Do not translate the tags.  This makes it possible to use 'helplang' to
  specify the preferred language.  You may add new tags in your language.
- When you do not translate a part of a file, add tags to the English version,
  using the "tag@en" notation.
- Make a package with all the files and the tags file available for download.
  Users can drop it in one of the "doc" directories and start use it.
  Report this to Bram, so that he can add a link on www.vim.org.
- Use the |:helptags| command to generate the tags files.  It will find all
  languages in the specified directory.

==============================================================================
4. Using Vim like less or more					*less*

If you use the less or more program to view a file, you don't get syntax
highlighting.  Thus you would like to use Vim instead.  You can do this by
using the shell script "$VIMRUNTIME/macros/less.sh".

This shell script uses the Vim script "$VIMRUNTIME/macros/less.vim".  It sets
up mappings to simulate the commands that less supports.  Otherwise, you can
still use the Vim commands.

This isn't perfect.  For example, when viewing a short file Vim will still use
the whole screen.  But it works good enough for most uses, and you get syntax
highlighting.

The "h" key will give you a short overview of the available commands.

 vim:tw=78:ts=8:ft=help:norl: