| /* vi:set ts=8 sts=4 sw=4 noet: |
| * |
| * VIM - Vi IMproved by Bram Moolenaar |
| * |
| * Do ":help uganda" in Vim to read copying and usage conditions. |
| * Do ":help credits" in Vim to see a list of people who contributed. |
| * See README.txt for an overview of the Vim source code. |
| */ |
| |
| /* |
| * mark.c: functions for setting marks and jumping to them |
| */ |
| |
| #include "vim.h" |
| |
| /* |
| * This file contains routines to maintain and manipulate marks. |
| */ |
| |
| /* |
| * If a named file mark's lnum is non-zero, it is valid. |
| * If a named file mark's fnum is non-zero, it is for an existing buffer, |
| * otherwise it is from .viminfo and namedfm[n].fname is the file name. |
| * There are marks 'A - 'Z (set by user) and '0 to '9 (set when writing |
| * viminfo). |
| */ |
| static xfmark_T namedfm[NMARKS + EXTRA_MARKS]; // marks with file nr |
| |
| static void fname2fnum(xfmark_T *fm); |
| static void fmarks_check_one(xfmark_T *fm, char_u *name, buf_T *buf); |
| static char_u *mark_line(pos_T *mp, int lead_len); |
| static void show_one_mark(int, char_u *, pos_T *, char_u *, int current); |
| static void mark_adjust_internal(linenr_T line1, linenr_T line2, long amount, |
| long amount_after, int adjust_folds); |
| |
| /* |
| * Set named mark "c" at current cursor position. |
| * Returns OK on success, FAIL if bad name given. |
| */ |
| int |
| setmark(int c) |
| { |
| return setmark_pos(c, &curwin->w_cursor, curbuf->b_fnum); |
| } |
| |
| /* |
| * Set named mark "c" to position "pos". |
| * When "c" is upper case use file "fnum". |
| * Returns OK on success, FAIL if bad name given. |
| */ |
| int |
| setmark_pos(int c, pos_T *pos, int fnum) |
| { |
| int i; |
| buf_T *buf; |
| |
| // Check for a special key (may cause islower() to crash). |
| if (c < 0) |
| return FAIL; |
| |
| if (c == '\'' || c == '`') |
| { |
| if (pos == &curwin->w_cursor) |
| { |
| setpcmark(); |
| // keep it even when the cursor doesn't move |
| curwin->w_prev_pcmark = curwin->w_pcmark; |
| } |
| else |
| curwin->w_pcmark = *pos; |
| return OK; |
| } |
| |
| buf = buflist_findnr(fnum); |
| if (buf == NULL) |
| return FAIL; |
| |
| if (c == '"') |
| { |
| buf->b_last_cursor = *pos; |
| return OK; |
| } |
| |
| // Allow setting '[ and '] for an autocommand that simulates reading a |
| // file. |
| if (c == '[') |
| { |
| buf->b_op_start = *pos; |
| return OK; |
| } |
| if (c == ']') |
| { |
| buf->b_op_end = *pos; |
| return OK; |
| } |
| |
| if (c == '<' || c == '>') |
| { |
| if (c == '<') |
| buf->b_visual.vi_start = *pos; |
| else |
| buf->b_visual.vi_end = *pos; |
| if (buf->b_visual.vi_mode == NUL) |
| // Visual_mode has not yet been set, use a sane default. |
| buf->b_visual.vi_mode = 'v'; |
| return OK; |
| } |
| |
| if (ASCII_ISLOWER(c)) |
| { |
| i = c - 'a'; |
| buf->b_namedm[i] = *pos; |
| return OK; |
| } |
| if (ASCII_ISUPPER(c) || VIM_ISDIGIT(c)) |
| { |
| if (VIM_ISDIGIT(c)) |
| i = c - '0' + NMARKS; |
| else |
| i = c - 'A'; |
| namedfm[i].fmark.mark = *pos; |
| namedfm[i].fmark.fnum = fnum; |
| VIM_CLEAR(namedfm[i].fname); |
| #ifdef FEAT_VIMINFO |
| namedfm[i].time_set = vim_time(); |
| #endif |
| return OK; |
| } |
| return FAIL; |
| } |
| |
| /* |
| * Set the previous context mark to the current position and add it to the |
| * jump list. |
| */ |
| void |
| setpcmark(void) |
| { |
| int i; |
| xfmark_T *fm; |
| |
| // for :global the mark is set only once |
| if (global_busy || listcmd_busy || (cmdmod.cmod_flags & CMOD_KEEPJUMPS)) |
| return; |
| |
| curwin->w_prev_pcmark = curwin->w_pcmark; |
| curwin->w_pcmark = curwin->w_cursor; |
| |
| if (jop_flags & JOP_STACK) |
| { |
| // jumpoptions=stack: if we're somewhere in the middle of the jumplist |
| // discard everything after the current index. |
| if (curwin->w_jumplistidx < curwin->w_jumplistlen - 1) |
| // Discard the rest of the jumplist by cutting the length down to |
| // contain nothing beyond the current index. |
| curwin->w_jumplistlen = curwin->w_jumplistidx + 1; |
| } |
| |
| // If jumplist is full: remove oldest entry |
| if (++curwin->w_jumplistlen > JUMPLISTSIZE) |
| { |
| curwin->w_jumplistlen = JUMPLISTSIZE; |
| vim_free(curwin->w_jumplist[0].fname); |
| for (i = 1; i < JUMPLISTSIZE; ++i) |
| curwin->w_jumplist[i - 1] = curwin->w_jumplist[i]; |
| } |
| curwin->w_jumplistidx = curwin->w_jumplistlen; |
| fm = &curwin->w_jumplist[curwin->w_jumplistlen - 1]; |
| |
| fm->fmark.mark = curwin->w_pcmark; |
| fm->fmark.fnum = curbuf->b_fnum; |
| fm->fname = NULL; |
| #ifdef FEAT_VIMINFO |
| fm->time_set = vim_time(); |
| #endif |
| } |
| |
| /* |
| * To change context, call setpcmark(), then move the current position to |
| * where ever, then call checkpcmark(). This ensures that the previous |
| * context will only be changed if the cursor moved to a different line. |
| * If pcmark was deleted (with "dG") the previous mark is restored. |
| */ |
| void |
| checkpcmark(void) |
| { |
| if (curwin->w_prev_pcmark.lnum != 0 |
| && (EQUAL_POS(curwin->w_pcmark, curwin->w_cursor) |
| || curwin->w_pcmark.lnum == 0)) |
| curwin->w_pcmark = curwin->w_prev_pcmark; |
| curwin->w_prev_pcmark.lnum = 0; // it has been checked |
| } |
| |
| /* |
| * move "count" positions in the jump list (count may be negative) |
| */ |
| pos_T * |
| movemark(int count) |
| { |
| pos_T *pos; |
| xfmark_T *jmp; |
| |
| cleanup_jumplist(curwin, TRUE); |
| |
| if (curwin->w_jumplistlen == 0) // nothing to jump to |
| return (pos_T *)NULL; |
| |
| for (;;) |
| { |
| if (curwin->w_jumplistidx + count < 0 |
| || curwin->w_jumplistidx + count >= curwin->w_jumplistlen) |
| return (pos_T *)NULL; |
| |
| /* |
| * if first CTRL-O or CTRL-I command after a jump, add cursor position |
| * to list. Careful: If there are duplicates (CTRL-O immediately after |
| * starting Vim on a file), another entry may have been removed. |
| */ |
| if (curwin->w_jumplistidx == curwin->w_jumplistlen) |
| { |
| setpcmark(); |
| --curwin->w_jumplistidx; // skip the new entry |
| if (curwin->w_jumplistidx + count < 0) |
| return (pos_T *)NULL; |
| } |
| |
| curwin->w_jumplistidx += count; |
| |
| jmp = curwin->w_jumplist + curwin->w_jumplistidx; |
| if (jmp->fmark.fnum == 0) |
| fname2fnum(jmp); |
| if (jmp->fmark.fnum != curbuf->b_fnum) |
| { |
| // Make a copy, an autocommand may make "jmp" invalid. |
| fmark_T fmark = jmp->fmark; |
| |
| // jump to the file with the mark |
| if (buflist_findnr(fmark.fnum) == NULL) |
| { // Skip this one .. |
| count += count < 0 ? -1 : 1; |
| continue; |
| } |
| if (buflist_getfile(fmark.fnum, fmark.mark.lnum, 0, FALSE) == FAIL) |
| return (pos_T *)NULL; |
| // Set lnum again, autocommands my have changed it |
| curwin->w_cursor = fmark.mark; |
| pos = (pos_T *)-1; |
| } |
| else |
| pos = &(jmp->fmark.mark); |
| return pos; |
| } |
| } |
| |
| /* |
| * Move "count" positions in the changelist (count may be negative). |
| */ |
| pos_T * |
| movechangelist(int count) |
| { |
| int n; |
| |
| if (curbuf->b_changelistlen == 0) // nothing to jump to |
| return (pos_T *)NULL; |
| |
| n = curwin->w_changelistidx; |
| if (n + count < 0) |
| { |
| if (n == 0) |
| return (pos_T *)NULL; |
| n = 0; |
| } |
| else if (n + count >= curbuf->b_changelistlen) |
| { |
| if (n == curbuf->b_changelistlen - 1) |
| return (pos_T *)NULL; |
| n = curbuf->b_changelistlen - 1; |
| } |
| else |
| n += count; |
| curwin->w_changelistidx = n; |
| return curbuf->b_changelist + n; |
| } |
| |
| /* |
| * Find mark "c" in buffer pointed to by "buf". |
| * If "changefile" is TRUE it's allowed to edit another file for '0, 'A, etc. |
| * If "fnum" is not NULL store the fnum there for '0, 'A etc., don't edit |
| * another file. |
| * Returns: |
| * - pointer to pos_T if found. lnum is 0 when mark not set, -1 when mark is |
| * in another file which can't be gotten. (caller needs to check lnum!) |
| * - NULL if there is no mark called 'c'. |
| * - -1 if mark is in other file and jumped there (only if changefile is TRUE) |
| */ |
| pos_T * |
| getmark_buf(buf_T *buf, int c, int changefile) |
| { |
| return getmark_buf_fnum(buf, c, changefile, NULL); |
| } |
| |
| pos_T * |
| getmark(int c, int changefile) |
| { |
| return getmark_buf_fnum(curbuf, c, changefile, NULL); |
| } |
| |
| pos_T * |
| getmark_buf_fnum( |
| buf_T *buf, |
| int c, |
| int changefile, |
| int *fnum) |
| { |
| pos_T *posp; |
| pos_T *startp, *endp; |
| static pos_T pos_copy; |
| |
| posp = NULL; |
| |
| // Check for special key, can't be a mark name and might cause islower() |
| // to crash. |
| if (c < 0) |
| return posp; |
| if (c > '~') // check for islower()/isupper() |
| ; |
| else if (c == '\'' || c == '`') // previous context mark |
| { |
| pos_copy = curwin->w_pcmark; // need to make a copy because |
| posp = &pos_copy; // w_pcmark may be changed soon |
| } |
| else if (c == '"') // to pos when leaving buffer |
| posp = &(buf->b_last_cursor); |
| else if (c == '^') // to where Insert mode stopped |
| posp = &(buf->b_last_insert); |
| else if (c == '.') // to where last change was made |
| posp = &(buf->b_last_change); |
| else if (c == '[') // to start of previous operator |
| posp = &(buf->b_op_start); |
| else if (c == ']') // to end of previous operator |
| posp = &(buf->b_op_end); |
| else if (c == '{' || c == '}') // to previous/next paragraph |
| { |
| pos_T pos; |
| oparg_T oa; |
| int slcb = listcmd_busy; |
| |
| pos = curwin->w_cursor; |
| listcmd_busy = TRUE; // avoid that '' is changed |
| if (findpar(&oa.inclusive, |
| c == '}' ? FORWARD : BACKWARD, 1L, NUL, FALSE)) |
| { |
| pos_copy = curwin->w_cursor; |
| posp = &pos_copy; |
| } |
| curwin->w_cursor = pos; |
| listcmd_busy = slcb; |
| } |
| else if (c == '(' || c == ')') // to previous/next sentence |
| { |
| pos_T pos; |
| int slcb = listcmd_busy; |
| |
| pos = curwin->w_cursor; |
| listcmd_busy = TRUE; // avoid that '' is changed |
| if (findsent(c == ')' ? FORWARD : BACKWARD, 1L)) |
| { |
| pos_copy = curwin->w_cursor; |
| posp = &pos_copy; |
| } |
| curwin->w_cursor = pos; |
| listcmd_busy = slcb; |
| } |
| else if (c == '<' || c == '>') // start/end of visual area |
| { |
| startp = &buf->b_visual.vi_start; |
| endp = &buf->b_visual.vi_end; |
| if (((c == '<') == LT_POS(*startp, *endp) || endp->lnum == 0) |
| && startp->lnum != 0) |
| posp = startp; |
| else |
| posp = endp; |
| /* |
| * For Visual line mode, set mark at begin or end of line |
| */ |
| if (buf->b_visual.vi_mode == 'V') |
| { |
| pos_copy = *posp; |
| posp = &pos_copy; |
| if (c == '<') |
| pos_copy.col = 0; |
| else |
| pos_copy.col = MAXCOL; |
| pos_copy.coladd = 0; |
| } |
| } |
| else if (ASCII_ISLOWER(c)) // normal named mark |
| { |
| posp = &(buf->b_namedm[c - 'a']); |
| } |
| else if (ASCII_ISUPPER(c) || VIM_ISDIGIT(c)) // named file mark |
| { |
| if (VIM_ISDIGIT(c)) |
| c = c - '0' + NMARKS; |
| else |
| c -= 'A'; |
| posp = &(namedfm[c].fmark.mark); |
| |
| if (namedfm[c].fmark.fnum == 0) |
| fname2fnum(&namedfm[c]); |
| |
| if (fnum != NULL) |
| *fnum = namedfm[c].fmark.fnum; |
| else if (namedfm[c].fmark.fnum != buf->b_fnum) |
| { |
| // mark is in another file |
| posp = &pos_copy; |
| |
| if (namedfm[c].fmark.mark.lnum != 0 |
| && changefile && namedfm[c].fmark.fnum) |
| { |
| if (buflist_getfile(namedfm[c].fmark.fnum, |
| (linenr_T)1, GETF_SETMARK, FALSE) == OK) |
| { |
| // Set the lnum now, autocommands could have changed it |
| curwin->w_cursor = namedfm[c].fmark.mark; |
| return (pos_T *)-1; |
| } |
| pos_copy.lnum = -1; // can't get file |
| } |
| else |
| pos_copy.lnum = 0; // mark exists, but is not valid in |
| // current buffer |
| } |
| } |
| |
| return posp; |
| } |
| |
| /* |
| * Search for the next named mark in the current file. |
| * |
| * Returns pointer to pos_T of the next mark or NULL if no mark is found. |
| */ |
| pos_T * |
| getnextmark( |
| pos_T *startpos, // where to start |
| int dir, // direction for search |
| int begin_line) |
| { |
| int i; |
| pos_T *result = NULL; |
| pos_T pos; |
| |
| pos = *startpos; |
| |
| // When searching backward and leaving the cursor on the first non-blank, |
| // position must be in a previous line. |
| // When searching forward and leaving the cursor on the first non-blank, |
| // position must be in a next line. |
| if (dir == BACKWARD && begin_line) |
| pos.col = 0; |
| else if (dir == FORWARD && begin_line) |
| pos.col = MAXCOL; |
| |
| for (i = 0; i < NMARKS; i++) |
| { |
| if (curbuf->b_namedm[i].lnum > 0) |
| { |
| if (dir == FORWARD) |
| { |
| if ((result == NULL || LT_POS(curbuf->b_namedm[i], *result)) |
| && LT_POS(pos, curbuf->b_namedm[i])) |
| result = &curbuf->b_namedm[i]; |
| } |
| else |
| { |
| if ((result == NULL || LT_POS(*result, curbuf->b_namedm[i])) |
| && LT_POS(curbuf->b_namedm[i], pos)) |
| result = &curbuf->b_namedm[i]; |
| } |
| } |
| } |
| |
| return result; |
| } |
| |
| /* |
| * For an xtended filemark: set the fnum from the fname. |
| * This is used for marks obtained from the .viminfo file. It's postponed |
| * until the mark is used to avoid a long startup delay. |
| */ |
| static void |
| fname2fnum(xfmark_T *fm) |
| { |
| char_u *p; |
| |
| if (fm->fname == NULL) |
| return; |
| |
| /* |
| * First expand "~/" in the file name to the home directory. |
| * Don't expand the whole name, it may contain other '~' chars. |
| */ |
| if (fm->fname[0] == '~' && (fm->fname[1] == '/' |
| #ifdef BACKSLASH_IN_FILENAME |
| || fm->fname[1] == '\\' |
| #endif |
| )) |
| { |
| int len; |
| |
| expand_env((char_u *)"~/", NameBuff, MAXPATHL); |
| len = (int)STRLEN(NameBuff); |
| vim_strncpy(NameBuff + len, fm->fname + 2, MAXPATHL - len - 1); |
| } |
| else |
| vim_strncpy(NameBuff, fm->fname, MAXPATHL - 1); |
| |
| // Try to shorten the file name. |
| mch_dirname(IObuff, IOSIZE); |
| p = shorten_fname(NameBuff, IObuff); |
| |
| // buflist_new() will call fmarks_check_names() |
| (void)buflist_new(NameBuff, p, (linenr_T)1, 0); |
| } |
| |
| /* |
| * Check all file marks for a name that matches the file name in buf. |
| * May replace the name with an fnum. |
| * Used for marks that come from the .viminfo file. |
| */ |
| void |
| fmarks_check_names(buf_T *buf) |
| { |
| char_u *name; |
| int i; |
| win_T *wp; |
| |
| if (buf->b_ffname == NULL) |
| return; |
| |
| name = home_replace_save(buf, buf->b_ffname); |
| if (name == NULL) |
| return; |
| |
| for (i = 0; i < NMARKS + EXTRA_MARKS; ++i) |
| fmarks_check_one(&namedfm[i], name, buf); |
| |
| FOR_ALL_WINDOWS(wp) |
| { |
| for (i = 0; i < wp->w_jumplistlen; ++i) |
| fmarks_check_one(&wp->w_jumplist[i], name, buf); |
| } |
| |
| vim_free(name); |
| } |
| |
| static void |
| fmarks_check_one(xfmark_T *fm, char_u *name, buf_T *buf) |
| { |
| if (fm->fmark.fnum == 0 |
| && fm->fname != NULL |
| && fnamecmp(name, fm->fname) == 0) |
| { |
| fm->fmark.fnum = buf->b_fnum; |
| VIM_CLEAR(fm->fname); |
| } |
| } |
| |
| /* |
| * Check a if a position from a mark is valid. |
| * Give and error message and return FAIL if not. |
| */ |
| int |
| check_mark(pos_T *pos) |
| { |
| if (pos == NULL) |
| { |
| emsg(_(e_unknown_mark)); |
| return FAIL; |
| } |
| if (pos->lnum <= 0) |
| { |
| // lnum is negative if mark is in another file can can't get that |
| // file, error message already give then. |
| if (pos->lnum == 0) |
| emsg(_(e_mark_not_set)); |
| return FAIL; |
| } |
| if (pos->lnum > curbuf->b_ml.ml_line_count) |
| { |
| emsg(_(e_mark_has_invalid_line_number)); |
| return FAIL; |
| } |
| return OK; |
| } |
| |
| /* |
| * clrallmarks() - clear all marks in the buffer 'buf' |
| * |
| * Used mainly when trashing the entire buffer during ":e" type commands |
| */ |
| void |
| clrallmarks(buf_T *buf) |
| { |
| static int i = -1; |
| |
| if (i == -1) // first call ever: initialize |
| for (i = 0; i < NMARKS + 1; i++) |
| { |
| namedfm[i].fmark.mark.lnum = 0; |
| namedfm[i].fname = NULL; |
| #ifdef FEAT_VIMINFO |
| namedfm[i].time_set = 0; |
| #endif |
| } |
| |
| for (i = 0; i < NMARKS; i++) |
| buf->b_namedm[i].lnum = 0; |
| buf->b_op_start.lnum = 0; // start/end op mark cleared |
| buf->b_op_end.lnum = 0; |
| buf->b_last_cursor.lnum = 1; // '" mark cleared |
| buf->b_last_cursor.col = 0; |
| buf->b_last_cursor.coladd = 0; |
| buf->b_last_insert.lnum = 0; // '^ mark cleared |
| buf->b_last_change.lnum = 0; // '. mark cleared |
| buf->b_changelistlen = 0; |
| } |
| |
| /* |
| * Get name of file from a filemark. |
| * When it's in the current buffer, return the text at the mark. |
| * Returns an allocated string. |
| */ |
| char_u * |
| fm_getname(fmark_T *fmark, int lead_len) |
| { |
| if (fmark->fnum == curbuf->b_fnum) // current buffer |
| return mark_line(&(fmark->mark), lead_len); |
| return buflist_nr2name(fmark->fnum, FALSE, TRUE); |
| } |
| |
| /* |
| * Return the line at mark "mp". Truncate to fit in window. |
| * The returned string has been allocated. |
| */ |
| static char_u * |
| mark_line(pos_T *mp, int lead_len) |
| { |
| char_u *s, *p; |
| int len; |
| |
| if (mp->lnum == 0 || mp->lnum > curbuf->b_ml.ml_line_count) |
| return vim_strsave((char_u *)"-invalid-"); |
| // Allow for up to 5 bytes per character. |
| s = vim_strnsave(skipwhite(ml_get(mp->lnum)), Columns * 5); |
| if (s == NULL) |
| return NULL; |
| // Truncate the line to fit it in the window. |
| len = 0; |
| for (p = s; *p != NUL; MB_PTR_ADV(p)) |
| { |
| len += ptr2cells(p); |
| if (len >= Columns - lead_len) |
| break; |
| } |
| *p = NUL; |
| return s; |
| } |
| |
| /* |
| * print the marks |
| */ |
| void |
| ex_marks(exarg_T *eap) |
| { |
| char_u *arg = eap->arg; |
| int i; |
| char_u *name; |
| pos_T *posp, *startp, *endp; |
| |
| if (arg != NULL && *arg == NUL) |
| arg = NULL; |
| |
| show_one_mark('\'', arg, &curwin->w_pcmark, NULL, TRUE); |
| for (i = 0; i < NMARKS; ++i) |
| show_one_mark(i + 'a', arg, &curbuf->b_namedm[i], NULL, TRUE); |
| for (i = 0; i < NMARKS + EXTRA_MARKS; ++i) |
| { |
| if (namedfm[i].fmark.fnum != 0) |
| name = fm_getname(&namedfm[i].fmark, 15); |
| else |
| name = namedfm[i].fname; |
| if (name != NULL) |
| { |
| show_one_mark(i >= NMARKS ? i - NMARKS + '0' : i + 'A', |
| arg, &namedfm[i].fmark.mark, name, |
| namedfm[i].fmark.fnum == curbuf->b_fnum); |
| if (namedfm[i].fmark.fnum != 0) |
| vim_free(name); |
| } |
| } |
| show_one_mark('"', arg, &curbuf->b_last_cursor, NULL, TRUE); |
| show_one_mark('[', arg, &curbuf->b_op_start, NULL, TRUE); |
| show_one_mark(']', arg, &curbuf->b_op_end, NULL, TRUE); |
| show_one_mark('^', arg, &curbuf->b_last_insert, NULL, TRUE); |
| show_one_mark('.', arg, &curbuf->b_last_change, NULL, TRUE); |
| |
| // Show the marks as where they will jump to. |
| startp = &curbuf->b_visual.vi_start; |
| endp = &curbuf->b_visual.vi_end; |
| if ((LT_POS(*startp, *endp) || endp->lnum == 0) && startp->lnum != 0) |
| posp = startp; |
| else |
| posp = endp; |
| show_one_mark('<', arg, posp, NULL, TRUE); |
| show_one_mark('>', arg, posp == startp ? endp : startp, NULL, TRUE); |
| |
| show_one_mark(-1, arg, NULL, NULL, FALSE); |
| } |
| |
| static void |
| show_one_mark( |
| int c, |
| char_u *arg, |
| pos_T *p, |
| char_u *name_arg, |
| int current) // in current file |
| { |
| static int did_title = FALSE; |
| int mustfree = FALSE; |
| char_u *name = name_arg; |
| |
| if (c == -1) // finish up |
| { |
| if (did_title) |
| did_title = FALSE; |
| else |
| { |
| if (arg == NULL) |
| msg(_("No marks set")); |
| else |
| semsg(_(e_no_marks_matching_str), arg); |
| } |
| } |
| // don't output anything if 'q' typed at --more-- prompt |
| else if (!got_int |
| && (arg == NULL || vim_strchr(arg, c) != NULL) |
| && p->lnum != 0) |
| { |
| if (name == NULL && current) |
| { |
| name = mark_line(p, 15); |
| mustfree = TRUE; |
| } |
| if (!message_filtered(name)) |
| { |
| if (!did_title) |
| { |
| // Highlight title |
| msg_puts_title(_("\nmark line col file/text")); |
| did_title = TRUE; |
| } |
| msg_putchar('\n'); |
| if (!got_int) |
| { |
| sprintf((char *)IObuff, " %c %6ld %4d ", c, p->lnum, p->col); |
| msg_outtrans(IObuff); |
| if (name != NULL) |
| { |
| msg_outtrans_attr(name, current ? HL_ATTR(HLF_D) : 0); |
| } |
| } |
| out_flush(); // show one line at a time |
| } |
| if (mustfree) |
| vim_free(name); |
| } |
| } |
| |
| /* |
| * ":delmarks[!] [marks]" |
| */ |
| void |
| ex_delmarks(exarg_T *eap) |
| { |
| char_u *p; |
| int from, to; |
| int i; |
| int lower; |
| int digit; |
| int n; |
| |
| if (*eap->arg == NUL && eap->forceit) |
| // clear all marks |
| clrallmarks(curbuf); |
| else if (eap->forceit) |
| emsg(_(e_invalid_argument)); |
| else if (*eap->arg == NUL) |
| emsg(_(e_argument_required)); |
| else |
| { |
| // clear specified marks only |
| for (p = eap->arg; *p != NUL; ++p) |
| { |
| lower = ASCII_ISLOWER(*p); |
| digit = VIM_ISDIGIT(*p); |
| if (lower || digit || ASCII_ISUPPER(*p)) |
| { |
| if (p[1] == '-') |
| { |
| // clear range of marks |
| from = *p; |
| to = p[2]; |
| if (!(lower ? ASCII_ISLOWER(p[2]) |
| : (digit ? VIM_ISDIGIT(p[2]) |
| : ASCII_ISUPPER(p[2]))) |
| || to < from) |
| { |
| semsg(_(e_invalid_argument_str), p); |
| return; |
| } |
| p += 2; |
| } |
| else |
| // clear one lower case mark |
| from = to = *p; |
| |
| for (i = from; i <= to; ++i) |
| { |
| if (lower) |
| curbuf->b_namedm[i - 'a'].lnum = 0; |
| else |
| { |
| if (digit) |
| n = i - '0' + NMARKS; |
| else |
| n = i - 'A'; |
| namedfm[n].fmark.mark.lnum = 0; |
| namedfm[n].fmark.fnum = 0; |
| VIM_CLEAR(namedfm[n].fname); |
| #ifdef FEAT_VIMINFO |
| namedfm[n].time_set = digit ? 0 : vim_time(); |
| #endif |
| } |
| } |
| } |
| else |
| switch (*p) |
| { |
| case '"': curbuf->b_last_cursor.lnum = 0; break; |
| case '^': curbuf->b_last_insert.lnum = 0; break; |
| case '.': curbuf->b_last_change.lnum = 0; break; |
| case '[': curbuf->b_op_start.lnum = 0; break; |
| case ']': curbuf->b_op_end.lnum = 0; break; |
| case '<': curbuf->b_visual.vi_start.lnum = 0; break; |
| case '>': curbuf->b_visual.vi_end.lnum = 0; break; |
| case ' ': break; |
| default: semsg(_(e_invalid_argument_str), p); |
| return; |
| } |
| } |
| } |
| } |
| |
| /* |
| * print the jumplist |
| */ |
| void |
| ex_jumps(exarg_T *eap UNUSED) |
| { |
| int i; |
| char_u *name; |
| |
| cleanup_jumplist(curwin, TRUE); |
| |
| // Highlight title |
| msg_puts_title(_("\n jump line col file/text")); |
| for (i = 0; i < curwin->w_jumplistlen && !got_int; ++i) |
| { |
| if (curwin->w_jumplist[i].fmark.mark.lnum != 0) |
| { |
| name = fm_getname(&curwin->w_jumplist[i].fmark, 16); |
| |
| // Make sure to output the current indicator, even when on an wiped |
| // out buffer. ":filter" may still skip it. |
| if (name == NULL && i == curwin->w_jumplistidx) |
| name = vim_strsave((char_u *)"-invalid-"); |
| // apply :filter /pat/ or file name not available |
| if (name == NULL || message_filtered(name)) |
| { |
| vim_free(name); |
| continue; |
| } |
| |
| msg_putchar('\n'); |
| if (got_int) |
| { |
| vim_free(name); |
| break; |
| } |
| sprintf((char *)IObuff, "%c %2d %5ld %4d ", |
| i == curwin->w_jumplistidx ? '>' : ' ', |
| i > curwin->w_jumplistidx ? i - curwin->w_jumplistidx |
| : curwin->w_jumplistidx - i, |
| curwin->w_jumplist[i].fmark.mark.lnum, |
| curwin->w_jumplist[i].fmark.mark.col); |
| msg_outtrans(IObuff); |
| msg_outtrans_attr(name, |
| curwin->w_jumplist[i].fmark.fnum == curbuf->b_fnum |
| ? HL_ATTR(HLF_D) : 0); |
| vim_free(name); |
| ui_breakcheck(); |
| } |
| out_flush(); |
| } |
| if (curwin->w_jumplistidx == curwin->w_jumplistlen) |
| msg_puts("\n>"); |
| } |
| |
| void |
| ex_clearjumps(exarg_T *eap UNUSED) |
| { |
| free_jumplist(curwin); |
| curwin->w_jumplistlen = 0; |
| curwin->w_jumplistidx = 0; |
| } |
| |
| /* |
| * print the changelist |
| */ |
| void |
| ex_changes(exarg_T *eap UNUSED) |
| { |
| int i; |
| char_u *name; |
| |
| // Highlight title |
| msg_puts_title(_("\nchange line col text")); |
| |
| for (i = 0; i < curbuf->b_changelistlen && !got_int; ++i) |
| { |
| if (curbuf->b_changelist[i].lnum != 0) |
| { |
| msg_putchar('\n'); |
| if (got_int) |
| break; |
| sprintf((char *)IObuff, "%c %3d %5ld %4d ", |
| i == curwin->w_changelistidx ? '>' : ' ', |
| i > curwin->w_changelistidx ? i - curwin->w_changelistidx |
| : curwin->w_changelistidx - i, |
| (long)curbuf->b_changelist[i].lnum, |
| curbuf->b_changelist[i].col); |
| msg_outtrans(IObuff); |
| name = mark_line(&curbuf->b_changelist[i], 17); |
| if (name == NULL) |
| break; |
| msg_outtrans_attr(name, HL_ATTR(HLF_D)); |
| vim_free(name); |
| ui_breakcheck(); |
| } |
| out_flush(); |
| } |
| if (curwin->w_changelistidx == curbuf->b_changelistlen) |
| msg_puts("\n>"); |
| } |
| |
| #define one_adjust(add) \ |
| { \ |
| lp = add; \ |
| if (*lp >= line1 && *lp <= line2) \ |
| { \ |
| if (amount == MAXLNUM) \ |
| *lp = 0; \ |
| else \ |
| *lp += amount; \ |
| } \ |
| else if (amount_after && *lp > line2) \ |
| *lp += amount_after; \ |
| } |
| |
| // don't delete the line, just put at first deleted line |
| #define one_adjust_nodel(add) \ |
| { \ |
| lp = add; \ |
| if (*lp >= line1 && *lp <= line2) \ |
| { \ |
| if (amount == MAXLNUM) \ |
| *lp = line1; \ |
| else \ |
| *lp += amount; \ |
| } \ |
| else if (amount_after && *lp > line2) \ |
| *lp += amount_after; \ |
| } |
| |
| /* |
| * Adjust marks between "line1" and "line2" (inclusive) to move "amount" lines. |
| * Must be called before changed_*(), appended_lines() or deleted_lines(). |
| * May be called before or after changing the text. |
| * When deleting lines "line1" to "line2", use an "amount" of MAXLNUM: The |
| * marks within this range are made invalid. |
| * If "amount_after" is non-zero adjust marks after "line2". |
| * Example: Delete lines 34 and 35: mark_adjust(34, 35, MAXLNUM, -2); |
| * Example: Insert two lines below 55: mark_adjust(56, MAXLNUM, 2, 0); |
| * or: mark_adjust(56, 55, MAXLNUM, 2); |
| */ |
| void |
| mark_adjust( |
| linenr_T line1, |
| linenr_T line2, |
| long amount, |
| long amount_after) |
| { |
| mark_adjust_internal(line1, line2, amount, amount_after, TRUE); |
| } |
| |
| void |
| mark_adjust_nofold( |
| linenr_T line1, |
| linenr_T line2, |
| long amount, |
| long amount_after) |
| { |
| mark_adjust_internal(line1, line2, amount, amount_after, FALSE); |
| } |
| |
| static void |
| mark_adjust_internal( |
| linenr_T line1, |
| linenr_T line2, |
| long amount, |
| long amount_after, |
| int adjust_folds UNUSED) |
| { |
| int i; |
| int fnum = curbuf->b_fnum; |
| linenr_T *lp; |
| win_T *win; |
| tabpage_T *tab; |
| static pos_T initpos = {1, 0, 0}; |
| |
| if (line2 < line1 && amount_after == 0L) // nothing to do |
| return; |
| |
| if ((cmdmod.cmod_flags & CMOD_LOCKMARKS) == 0) |
| { |
| // named marks, lower case and upper case |
| for (i = 0; i < NMARKS; i++) |
| { |
| one_adjust(&(curbuf->b_namedm[i].lnum)); |
| if (namedfm[i].fmark.fnum == fnum) |
| one_adjust_nodel(&(namedfm[i].fmark.mark.lnum)); |
| } |
| for (i = NMARKS; i < NMARKS + EXTRA_MARKS; i++) |
| { |
| if (namedfm[i].fmark.fnum == fnum) |
| one_adjust_nodel(&(namedfm[i].fmark.mark.lnum)); |
| } |
| |
| // last Insert position |
| one_adjust(&(curbuf->b_last_insert.lnum)); |
| |
| // last change position |
| one_adjust(&(curbuf->b_last_change.lnum)); |
| |
| // last cursor position, if it was set |
| if (!EQUAL_POS(curbuf->b_last_cursor, initpos)) |
| one_adjust(&(curbuf->b_last_cursor.lnum)); |
| |
| |
| // list of change positions |
| for (i = 0; i < curbuf->b_changelistlen; ++i) |
| one_adjust_nodel(&(curbuf->b_changelist[i].lnum)); |
| |
| // Visual area |
| one_adjust_nodel(&(curbuf->b_visual.vi_start.lnum)); |
| one_adjust_nodel(&(curbuf->b_visual.vi_end.lnum)); |
| |
| #ifdef FEAT_QUICKFIX |
| // quickfix marks |
| qf_mark_adjust(NULL, line1, line2, amount, amount_after); |
| // location lists |
| FOR_ALL_TAB_WINDOWS(tab, win) |
| qf_mark_adjust(win, line1, line2, amount, amount_after); |
| #endif |
| |
| #ifdef FEAT_SIGNS |
| sign_mark_adjust(line1, line2, amount, amount_after); |
| #endif |
| } |
| |
| // previous context mark |
| one_adjust(&(curwin->w_pcmark.lnum)); |
| |
| // previous pcmark |
| one_adjust(&(curwin->w_prev_pcmark.lnum)); |
| |
| // saved cursor for formatting |
| if (saved_cursor.lnum != 0) |
| one_adjust_nodel(&(saved_cursor.lnum)); |
| |
| /* |
| * Adjust items in all windows related to the current buffer. |
| */ |
| FOR_ALL_TAB_WINDOWS(tab, win) |
| { |
| if ((cmdmod.cmod_flags & CMOD_LOCKMARKS) == 0) |
| // Marks in the jumplist. When deleting lines, this may create |
| // duplicate marks in the jumplist, they will be removed later. |
| for (i = 0; i < win->w_jumplistlen; ++i) |
| if (win->w_jumplist[i].fmark.fnum == fnum) |
| one_adjust_nodel(&(win->w_jumplist[i].fmark.mark.lnum)); |
| |
| if (win->w_buffer == curbuf) |
| { |
| if ((cmdmod.cmod_flags & CMOD_LOCKMARKS) == 0) |
| // marks in the tag stack |
| for (i = 0; i < win->w_tagstacklen; i++) |
| if (win->w_tagstack[i].fmark.fnum == fnum) |
| one_adjust_nodel(&(win->w_tagstack[i].fmark.mark.lnum)); |
| |
| // the displayed Visual area |
| if (win->w_old_cursor_lnum != 0) |
| { |
| one_adjust_nodel(&(win->w_old_cursor_lnum)); |
| one_adjust_nodel(&(win->w_old_visual_lnum)); |
| } |
| |
| // topline and cursor position for windows with the same buffer |
| // other than the current window |
| if (win != curwin) |
| { |
| if (win->w_topline >= line1 && win->w_topline <= line2) |
| { |
| if (amount == MAXLNUM) // topline is deleted |
| { |
| if (line1 <= 1) |
| win->w_topline = 1; |
| else |
| win->w_topline = line1 - 1; |
| } |
| else if (win->w_topline > line1) |
| // keep topline on the same line, unless inserting just |
| // above it (we probably want to see that line then) |
| win->w_topline += amount; |
| #ifdef FEAT_DIFF |
| win->w_topfill = 0; |
| #endif |
| } |
| else if (amount_after && win->w_topline > line2) |
| { |
| win->w_topline += amount_after; |
| #ifdef FEAT_DIFF |
| win->w_topfill = 0; |
| #endif |
| } |
| if (win->w_cursor.lnum >= line1 && win->w_cursor.lnum <= line2) |
| { |
| if (amount == MAXLNUM) // line with cursor is deleted |
| { |
| if (line1 <= 1) |
| win->w_cursor.lnum = 1; |
| else |
| win->w_cursor.lnum = line1 - 1; |
| win->w_cursor.col = 0; |
| } |
| else // keep cursor on the same line |
| win->w_cursor.lnum += amount; |
| } |
| else if (amount_after && win->w_cursor.lnum > line2) |
| win->w_cursor.lnum += amount_after; |
| } |
| |
| #ifdef FEAT_FOLDING |
| // adjust folds |
| if (adjust_folds) |
| foldMarkAdjust(win, line1, line2, amount, amount_after); |
| #endif |
| } |
| } |
| |
| #ifdef FEAT_DIFF |
| // adjust diffs |
| diff_mark_adjust(line1, line2, amount, amount_after); |
| #endif |
| } |
| |
| // This code is used often, needs to be fast. |
| #define col_adjust(pp) \ |
| { \ |
| posp = pp; \ |
| if (posp->lnum == lnum && posp->col >= mincol) \ |
| { \ |
| posp->lnum += lnum_amount; \ |
| if (col_amount < 0 && posp->col <= (colnr_T)-col_amount) \ |
| posp->col = 0; \ |
| else if (posp->col < spaces_removed) \ |
| posp->col = col_amount + spaces_removed; \ |
| else \ |
| posp->col += col_amount; \ |
| } \ |
| } |
| |
| /* |
| * Adjust marks in line "lnum" at column "mincol" and further: add |
| * "lnum_amount" to the line number and add "col_amount" to the column |
| * position. |
| * "spaces_removed" is the number of spaces that were removed, matters when the |
| * cursor is inside them. |
| */ |
| void |
| mark_col_adjust( |
| linenr_T lnum, |
| colnr_T mincol, |
| long lnum_amount, |
| long col_amount, |
| int spaces_removed) |
| { |
| int i; |
| int fnum = curbuf->b_fnum; |
| win_T *win; |
| pos_T *posp; |
| |
| if ((col_amount == 0L && lnum_amount == 0L) |
| || (cmdmod.cmod_flags & CMOD_LOCKMARKS)) |
| return; // nothing to do |
| |
| // named marks, lower case and upper case |
| for (i = 0; i < NMARKS; i++) |
| { |
| col_adjust(&(curbuf->b_namedm[i])); |
| if (namedfm[i].fmark.fnum == fnum) |
| col_adjust(&(namedfm[i].fmark.mark)); |
| } |
| for (i = NMARKS; i < NMARKS + EXTRA_MARKS; i++) |
| { |
| if (namedfm[i].fmark.fnum == fnum) |
| col_adjust(&(namedfm[i].fmark.mark)); |
| } |
| |
| // last Insert position |
| col_adjust(&(curbuf->b_last_insert)); |
| |
| // last change position |
| col_adjust(&(curbuf->b_last_change)); |
| |
| // list of change positions |
| for (i = 0; i < curbuf->b_changelistlen; ++i) |
| col_adjust(&(curbuf->b_changelist[i])); |
| |
| // Visual area |
| col_adjust(&(curbuf->b_visual.vi_start)); |
| col_adjust(&(curbuf->b_visual.vi_end)); |
| |
| // previous context mark |
| col_adjust(&(curwin->w_pcmark)); |
| |
| // previous pcmark |
| col_adjust(&(curwin->w_prev_pcmark)); |
| |
| // saved cursor for formatting |
| col_adjust(&saved_cursor); |
| |
| /* |
| * Adjust items in all windows related to the current buffer. |
| */ |
| FOR_ALL_WINDOWS(win) |
| { |
| // marks in the jumplist |
| for (i = 0; i < win->w_jumplistlen; ++i) |
| if (win->w_jumplist[i].fmark.fnum == fnum) |
| col_adjust(&(win->w_jumplist[i].fmark.mark)); |
| |
| if (win->w_buffer == curbuf) |
| { |
| // marks in the tag stack |
| for (i = 0; i < win->w_tagstacklen; i++) |
| if (win->w_tagstack[i].fmark.fnum == fnum) |
| col_adjust(&(win->w_tagstack[i].fmark.mark)); |
| |
| // cursor position for other windows with the same buffer |
| if (win != curwin) |
| col_adjust(&win->w_cursor); |
| } |
| } |
| } |
| |
| /* |
| * When deleting lines, this may create duplicate marks in the |
| * jumplist. They will be removed here for the specified window. |
| * When "loadfiles" is TRUE first ensure entries have the "fnum" field set |
| * (this may be a bit slow). |
| */ |
| void |
| cleanup_jumplist(win_T *wp, int loadfiles) |
| { |
| int i; |
| int from, to; |
| int mustfree; |
| |
| if (loadfiles) |
| { |
| // If specified, load all the files from the jump list. This is |
| // needed to properly clean up duplicate entries, but will take some |
| // time. |
| for (i = 0; i < wp->w_jumplistlen; ++i) |
| { |
| if ((wp->w_jumplist[i].fmark.fnum == 0) && |
| (wp->w_jumplist[i].fmark.mark.lnum != 0)) |
| fname2fnum(&wp->w_jumplist[i]); |
| } |
| } |
| |
| to = 0; |
| for (from = 0; from < wp->w_jumplistlen; ++from) |
| { |
| if (wp->w_jumplistidx == from) |
| wp->w_jumplistidx = to; |
| for (i = from + 1; i < wp->w_jumplistlen; ++i) |
| if (wp->w_jumplist[i].fmark.fnum |
| == wp->w_jumplist[from].fmark.fnum |
| && wp->w_jumplist[from].fmark.fnum != 0 |
| && wp->w_jumplist[i].fmark.mark.lnum |
| == wp->w_jumplist[from].fmark.mark.lnum) |
| break; |
| if (i >= wp->w_jumplistlen) // not duplicate |
| mustfree = FALSE; |
| else if (i > from + 1) // non-adjacent duplicate |
| // jumpoptions=stack: remove duplicates only when adjacent. |
| mustfree = !(jop_flags & JOP_STACK); |
| else // adjacent duplicate |
| mustfree = TRUE; |
| |
| if (mustfree) |
| vim_free(wp->w_jumplist[from].fname); |
| else |
| wp->w_jumplist[to++] = wp->w_jumplist[from]; |
| } |
| if (wp->w_jumplistidx == wp->w_jumplistlen) |
| wp->w_jumplistidx = to; |
| wp->w_jumplistlen = to; |
| } |
| |
| /* |
| * Copy the jumplist from window "from" to window "to". |
| */ |
| void |
| copy_jumplist(win_T *from, win_T *to) |
| { |
| int i; |
| |
| for (i = 0; i < from->w_jumplistlen; ++i) |
| { |
| to->w_jumplist[i] = from->w_jumplist[i]; |
| if (from->w_jumplist[i].fname != NULL) |
| to->w_jumplist[i].fname = vim_strsave(from->w_jumplist[i].fname); |
| } |
| to->w_jumplistlen = from->w_jumplistlen; |
| to->w_jumplistidx = from->w_jumplistidx; |
| } |
| |
| /* |
| * Free items in the jumplist of window "wp". |
| */ |
| void |
| free_jumplist(win_T *wp) |
| { |
| int i; |
| |
| for (i = 0; i < wp->w_jumplistlen; ++i) |
| vim_free(wp->w_jumplist[i].fname); |
| } |
| |
| void |
| set_last_cursor(win_T *win) |
| { |
| if (win->w_buffer != NULL) |
| win->w_buffer->b_last_cursor = win->w_cursor; |
| } |
| |
| #if defined(EXITFREE) || defined(PROTO) |
| void |
| free_all_marks(void) |
| { |
| int i; |
| |
| for (i = 0; i < NMARKS + EXTRA_MARKS; i++) |
| if (namedfm[i].fmark.mark.lnum != 0) |
| vim_free(namedfm[i].fname); |
| } |
| #endif |
| |
| #if defined(FEAT_VIMINFO) || defined(PROTO) |
| /* |
| * Return a pointer to the named file marks. |
| */ |
| xfmark_T * |
| get_namedfm(void) |
| { |
| return namedfm; |
| } |
| #endif |
| |
| #if defined(FEAT_EVAL) || defined(PROTO) |
| /* |
| * Add information about mark 'mname' to list 'l' |
| */ |
| static int |
| add_mark(list_T *l, char_u *mname, pos_T *pos, int bufnr, char_u *fname) |
| { |
| dict_T *d; |
| list_T *lpos; |
| |
| if (pos->lnum <= 0) |
| return OK; |
| |
| d = dict_alloc(); |
| if (d == NULL) |
| return FAIL; |
| |
| if (list_append_dict(l, d) == FAIL) |
| { |
| dict_unref(d); |
| return FAIL; |
| } |
| |
| lpos = list_alloc(); |
| if (lpos == NULL) |
| return FAIL; |
| |
| list_append_number(lpos, bufnr); |
| list_append_number(lpos, pos->lnum); |
| list_append_number(lpos, pos->col + 1); |
| list_append_number(lpos, pos->coladd); |
| |
| if (dict_add_string(d, "mark", mname) == FAIL |
| || dict_add_list(d, "pos", lpos) == FAIL |
| || (fname != NULL && dict_add_string(d, "file", fname) == FAIL)) |
| return FAIL; |
| |
| return OK; |
| } |
| |
| /* |
| * Get information about marks local to a buffer. |
| */ |
| static void |
| get_buf_local_marks(buf_T *buf, list_T *l) |
| { |
| char_u mname[3] = "' "; |
| int i; |
| |
| // Marks 'a' to 'z' |
| for (i = 0; i < NMARKS; ++i) |
| { |
| mname[1] = 'a' + i; |
| add_mark(l, mname, &buf->b_namedm[i], buf->b_fnum, NULL); |
| } |
| |
| // Mark '' is a window local mark and not a buffer local mark |
| add_mark(l, (char_u *)"''", &curwin->w_pcmark, curbuf->b_fnum, NULL); |
| |
| add_mark(l, (char_u *)"'\"", &buf->b_last_cursor, buf->b_fnum, NULL); |
| add_mark(l, (char_u *)"'[", &buf->b_op_start, buf->b_fnum, NULL); |
| add_mark(l, (char_u *)"']", &buf->b_op_end, buf->b_fnum, NULL); |
| add_mark(l, (char_u *)"'^", &buf->b_last_insert, buf->b_fnum, NULL); |
| add_mark(l, (char_u *)"'.", &buf->b_last_change, buf->b_fnum, NULL); |
| add_mark(l, (char_u *)"'<", &buf->b_visual.vi_start, buf->b_fnum, NULL); |
| add_mark(l, (char_u *)"'>", &buf->b_visual.vi_end, buf->b_fnum, NULL); |
| } |
| |
| /* |
| * Get information about global marks ('A' to 'Z' and '0' to '9') |
| */ |
| static void |
| get_global_marks(list_T *l) |
| { |
| char_u mname[3] = "' "; |
| int i; |
| char_u *name; |
| |
| // Marks 'A' to 'Z' and '0' to '9' |
| for (i = 0; i < NMARKS + EXTRA_MARKS; ++i) |
| { |
| if (namedfm[i].fmark.fnum != 0) |
| name = buflist_nr2name(namedfm[i].fmark.fnum, TRUE, TRUE); |
| else |
| name = namedfm[i].fname; |
| if (name != NULL) |
| { |
| mname[1] = i >= NMARKS ? i - NMARKS + '0' : i + 'A'; |
| add_mark(l, mname, &namedfm[i].fmark.mark, |
| namedfm[i].fmark.fnum, name); |
| if (namedfm[i].fmark.fnum != 0) |
| vim_free(name); |
| } |
| } |
| } |
| |
| /* |
| * getmarklist() function |
| */ |
| void |
| f_getmarklist(typval_T *argvars, typval_T *rettv) |
| { |
| buf_T *buf = NULL; |
| |
| if (rettv_list_alloc(rettv) == FAIL) |
| return; |
| |
| if (in_vim9script() && check_for_opt_buffer_arg(argvars, 0) == FAIL) |
| return; |
| |
| if (argvars[0].v_type == VAR_UNKNOWN) |
| { |
| get_global_marks(rettv->vval.v_list); |
| return; |
| } |
| |
| buf = tv_get_buf(&argvars[0], FALSE); |
| if (buf == NULL) |
| return; |
| |
| get_buf_local_marks(buf, rettv->vval.v_list); |
| } |
| #endif |