src/po/Makefile - android_external_vim - Gitiles

 # Makefile for the Vim message translations.

 # Include stuff found by configure.
 include ../auto/config.mk

 # get LANGUAGES, MOFILES, MOCONVERTED and CHECKFILES
 include Make_all.mak

 # Note: ja.sjis, *.cp1250 and zh_CN.cp936 are only for MS-Windows, they are
 # not installed on Unix

 PACKAGE = vim
 SHELL = /bin/sh
 VIM = ../vim

 # The OLD_PO_FILE_INPUT and OLD_PO_FILE_OUTPUT are for the new GNU gettext
 # tools 0.10.37, which use a slightly different .po file format that is not
 # compatible with Solaris (and old gettext implementations) unless these are
 # set.  gettext 0.10.36 will not work!
 MSGFMTCMD = OLD_PO_FILE_INPUT=yes $(MSGFMT) -v
 XGETTEXT = OLD_PO_FILE_INPUT=yes OLD_PO_FILE_OUTPUT=yes xgettext
 MSGMERGE = OLD_PO_FILE_INPUT=yes OLD_PO_FILE_OUTPUT=yes msgmerge

 .SUFFIXES:
 .SUFFIXES: .po .mo .pot .ck
 .PHONY: all install uninstall prefixcheck converted check clean checkclean distclean update-po $(LANGUAGES)

 .po.mo:
 	$(MSGFMTCMD) -o $@ $<

 .po.ck:
 	$(VIM) -u NONE -e -X -S check.vim -c "if error == 0 | q | endif" -c cq $<
 	touch $@

 all: $(MOFILES) $(MOCONVERTED) $(MSGFMT_DESKTOP)

 check: $(CHECKFILES)

 # installing for real
 install: $(MOFILES) $(MOCONVERTED)
 	@$(MAKE) prefixcheck
 	for lang in $(LANGUAGES); do \
 	  dir=$(LOCALEDIR)/$$lang/; \
 	  if test ! -x "$$dir"; then \
 	    mkdir $$dir; chmod 755 $$dir; \
 	  fi; \
 	  dir=$(LOCALEDIR)/$$lang/LC_MESSAGES; \
 	  if test ! -x "$$dir"; then \
 	    mkdir $$dir; chmod 755 $$dir; \
 	  fi; \
 	  if test -r $$lang.mo; then \
 	    $(INSTALL_DATA) $$lang.mo $$dir/$(PACKAGE).mo; \
 	    chmod $(FILEMOD) $$dir/$(PACKAGE).mo; \
 	  fi; \
 	done

 uninstall:
 	@$(MAKE) prefixcheck
 	for cat in $(MOFILES) $(MOCONVERTED); do \
 	  cat=`basename $$cat`; \
 	  lang=`echo $$cat | sed 's/\$(CATOBJEXT)$$//'`; \
 	  rm -f $(LOCALEDIR)/$$lang/LC_MESSAGES/$(PACKAGE).mo; \
 	done

 # installing for local tryout into ../../runtime/lang
 tryoutinstall: $(MOFILES) $(MOCONVERTED)
 	@$(MAKE) prefixcheck
 	for lang in $(LANGUAGES); do \
 	  dir=../../runtime/lang/$$lang/; \
 	  if test ! -x "$$dir"; then \
 	    mkdir $$dir; chmod 755 $$dir; \
 	  fi; \
 	  dir=../../runtime/lang/$$lang/LC_MESSAGES; \
 	  if test ! -x "$$dir"; then \
 	    mkdir $$dir; chmod 755 $$dir; \
 	  fi; \
 	  if test -r $$lang.mo; then \
 	    cp $$lang.mo $$dir/$(PACKAGE).mo; \
 	    chmod 644 $$dir/$(PACKAGE).mo; \
 	  fi; \
 	done

 converted: $(MOCONVERTED)

 # nl.po was added later, if it does not exist use a file with just a # in it
 # (an empty file doesn't work with old msgfmt).
 nl.po:
 	@( echo \# > nl.po )

 # Norwegian/Bokmal: "nb" is an alias for "no".
 # Copying the file is not efficient, but I don't know of another way to make
 # this work.
 nb.po: no.po
 	cp no.po nb.po

 # Convert ja.po to create ja.sjis.po.  Requires doubling backslashes in the
 # second byte.  Don't depend on sjiscorr, it should only be compiled when
 # ja.sjis.po is outdated.
 ja.sjis.po: ja.po
 	@$(MAKE) sjiscorr
 	rm -f ja.sjis.po
 	iconv -f utf-8 -t cp932 ja.po | ./sjiscorr > ja.sjis.po

 sjiscorr: sjiscorr.c
 	$(CC) -o sjiscorr sjiscorr.c

 ja.euc-jp.po: ja.po
 	iconv -f utf-8 -t euc-jp ja.po | \
 		sed -e 's/charset=[uU][tT][fF]-8/charset=euc-jp/' -e 's/# Original translations/# Generated from ja.po, DO NOT EDIT/' > ja.euc-jp.po

 # Convert cs.po to create cs.cp1250.po.
 cs.cp1250.po: cs.po
 	rm -f cs.cp1250.po
 	iconv -f iso-8859-2 -t cp1250 cs.po | \
 		sed -e 's/charset=ISO-8859-2/charset=cp1250/' -e 's/# Original translations/# Generated from cs.po, DO NOT EDIT/' > cs.cp1250.po

 # Convert pl.po to create pl.cp1250.po.
 pl.cp1250.po: pl.po
 	rm -f pl.cp1250.po
 	iconv -f iso-8859-2 -t cp1250 pl.po | \
 		sed -e 's/charset=ISO-8859-2/charset=cp1250/' -e 's/# Original translations/# Generated from pl.po, DO NOT EDIT/' > pl.cp1250.po

 # Convert pl.po to create pl.UTF-8.po.
 pl.UTF-8.po: pl.po
 	rm -f pl.UTF-8.po
 	iconv -f iso-8859-2 -t utf-8 pl.po | \
 		sed -e 's/charset=ISO-8859-2/charset=UTF-8/' -e 's/# Original translations/# Generated from pl.po, DO NOT EDIT/' > pl.UTF-8.po

 # Convert sk.po to create sk.cp1250.po.
 sk.cp1250.po: sk.po
 	rm -f sk.cp1250.po
 	iconv -f iso-8859-2 -t cp1250 sk.po | \
 		sed -e 's/charset=ISO-8859-2/charset=cp1250/' -e 's/# Original translations/# Generated from sk.po, DO NOT EDIT/' > sk.cp1250.po

 # Convert zh_CN.UTF-8.po to create zh_CN.po.
 zh_CN.po: zh_CN.UTF-8.po
 	rm -f zh_CN.po
 	iconv -f UTF-8 -t gb2312 zh_CN.UTF-8.po | \
 		sed -e 's/charset=[uU][tT][fF]-8/charset=gb2312/' -e 's/# Original translations/# Generated from zh_CN.UTF-8.po, DO NOT EDIT/' > zh_CN.po

 # Convert zh_CN.UTF-8.po to create zh_CN.cp936.po.
 # Set 'charset' to gbk to avoid that msfmt generates a warning.
 # This used to convert from zh_CN.po, but that results in a conversion error.
 zh_CN.cp936.po: zh_CN.UTF-8.po
 	rm -f zh_CN.cp936.po
 	iconv -f UTF-8 -t cp936 zh_CN.UTF-8.po | \
 		sed -e 's/charset=[uU][tT][fF]-8/charset=gbk/' -e 's/# Original translations/# Generated from zh_CN.UTF-8.po, DO NOT EDIT/' > zh_CN.cp936.po

 # Convert ko.UTF-8.po to create ko.po.
 ko.po: ko.UTF-8.po
 	rm -f ko.po
 	iconv -f UTF-8 -t euc-kr ko.UTF-8.po | \
 		sed -e 's/charset=UTF-8/charset=euc-kr/' \
 		    -e 's/# Korean translation for Vim/# Generated from ko.UTF-8.po, DO NOT EDIT/' \
 		    > ko.po

 # Convert ru.po to create ru.cp1251.po.
 ru.cp1251.po: ru.po
 	rm -f ru.cp1251.po
 	iconv -f utf-8 -t cp1251 ru.po | \
 		sed -e 's/charset=[uU][tT][fF]-8/charset=cp1251/' -e 's/# Original translations/# Generated from ru.po, DO NOT EDIT/' > ru.cp1251.po

 # Convert uk.po to create uk.cp1251.po.
 uk.cp1251.po: uk.po
 	rm -f uk.cp1251.po
 	iconv -f utf-8 -t cp1251 uk.po | \
 		sed -e 's/charset=[uU][tT][fF]-8/charset=cp1251/' -e 's/# Original translations/# Generated from uk.po, DO NOT EDIT/' > uk.cp1251.po

 prefixcheck:
 	@if test "x" = "x$(prefix)"; then \
 	  echo "******************************************"; \
 	  echo "  please use make from the src directory  "; \
 	  echo "******************************************"; \
 	  exit 1; \
 	fi

 clean: checkclean
 	rm -f core core.* *.old.po *.mo *.pot sjiscorr
 	rm -f LINGUAS vim.desktop gvim.desktop tmp_*desktop

 distclean: clean

 checkclean:
 	rm -f *.ck

 PO_INPUTLIST = \
 	../*.c \
 	../if_perl.xs \
 	../GvimExt/gvimext.cpp \
 	../errors.h \
 	../globals.h \
 	../if_py_both.h \
 	../vim.h \
 	gvim.desktop.in \
 	vim.desktop.in

 PO_VIM_INPUTLIST = \
 	../../runtime/optwin.vim

 PO_VIM_JSLIST = \
 	optwin.js

 $(PACKAGE).pot: $(PO_INPUTLIST) $(PO_VIM_INPUTLIST)
 	# Convert the Vim scripts to (what looks like) Javascript
 	$(VIM) -u NONE --not-a-term -S tojavascript.vim $(PACKAGE).pot $(PO_VIM_INPUTLIST)
 	# create vim.pot
 	$(XGETTEXT) --default-domain=$(PACKAGE) --add-comments \
 		--keyword=_ --keyword=N_ --keyword=NGETTEXT:1,2 \
 		$(PO_INPUTLIST) $(PO_VIM_JSLIST)
 	mv -f $(PACKAGE).po $(PACKAGE).pot
 	# Fix Vim scripts names, so that "gf" works
 	$(VIM) -u NONE --not-a-term -S fixfilenames.vim $(PACKAGE).pot $(PO_VIM_INPUTLIST)
 	# Delete the temporary files
 	rm *.js

 vim.desktop: vim.desktop.in $(POFILES)
 	echo $(LANGUAGES) | tr " " "\n" |sed -e '/\./d' | sort > LINGUAS
 	$(MSGFMT) --desktop -d . --template vim.desktop.in -o tmp_vim.desktop
 	rm -f LINGUAS
 	if command -v desktop-file-validate; then desktop-file-validate tmp_vim.desktop; fi
 	mv tmp_vim.desktop vim.desktop

 # The dependency on vim.desktop is only to avoid the two targets are build at
 # the same time, which causes a race for the LINGUAS file.
 gvim.desktop: gvim.desktop.in $(POFILES) vim.desktop
 	echo $(LANGUAGES) | tr " " "\n" |sed -e '/\./d' | sort > LINGUAS
 	$(MSGFMT) --desktop -d . --template gvim.desktop.in -o tmp_gvim.desktop
 	rm -f LINGUAS
 	if command -v desktop-file-validate; then desktop-file-validate tmp_gvim.desktop; fi
 	mv tmp_gvim.desktop gvim.desktop

 update-po: $(LANGUAGES)

 # Don't add a dependency here, we only want to update the .po files manually
 $(LANGUAGES):
 	@$(MAKE) $(PACKAGE).pot
 	if test ! -f $@.po.orig; then cp $@.po $@.po.orig; fi
 	mv $@.po $@.po.old
 	if $(MSGMERGE) $@.po.old $(PACKAGE).pot -o $@.po; then \
 	    rm -f $@.po.old; \
 	else \
 	    echo "msgmerge for $@.po failed!"; mv $@.po.old $@.po; \
 	fi
	# Makefile for the Vim message translations.

	# Include stuff found by configure.
	include ../auto/config.mk

	# get LANGUAGES, MOFILES, MOCONVERTED and CHECKFILES
	include Make_all.mak

	# Note: ja.sjis, *.cp1250 and zh_CN.cp936 are only for MS-Windows, they are
	# not installed on Unix

	PACKAGE = vim
	SHELL = /bin/sh
	VIM = ../vim

	# The OLD_PO_FILE_INPUT and OLD_PO_FILE_OUTPUT are for the new GNU gettext
	# tools 0.10.37, which use a slightly different .po file format that is not
	# compatible with Solaris (and old gettext implementations) unless these are
	# set. gettext 0.10.36 will not work!
	MSGFMTCMD = OLD_PO_FILE_INPUT=yes $(MSGFMT) -v
	XGETTEXT = OLD_PO_FILE_INPUT=yes OLD_PO_FILE_OUTPUT=yes xgettext
	MSGMERGE = OLD_PO_FILE_INPUT=yes OLD_PO_FILE_OUTPUT=yes msgmerge

	.SUFFIXES:
	.SUFFIXES: .po .mo .pot .ck
	.PHONY: all install uninstall prefixcheck converted check clean checkclean distclean update-po $(LANGUAGES)

	.po.mo:
	$(MSGFMTCMD) -o $@ $<

	.po.ck:
	$(VIM) -u NONE -e -X -S check.vim -c "if error == 0 \| q \| endif" -c cq $<
	touch $@

	all: $(MOFILES) $(MOCONVERTED) $(MSGFMT_DESKTOP)

	check: $(CHECKFILES)

	# installing for real
	install: $(MOFILES) $(MOCONVERTED)
	@$(MAKE) prefixcheck
	for lang in $(LANGUAGES); do \
	dir=$(LOCALEDIR)/$$lang/; \
	if test ! -x "$$dir"; then \
	mkdir $$dir; chmod 755 $$dir; \
	fi; \
	dir=$(LOCALEDIR)/$$lang/LC_MESSAGES; \
	if test ! -x "$$dir"; then \
	mkdir $$dir; chmod 755 $$dir; \
	fi; \
	if test -r $$lang.mo; then \
	$(INSTALL_DATA) $$lang.mo $$dir/$(PACKAGE).mo; \
	chmod $(FILEMOD) $$dir/$(PACKAGE).mo; \
	fi; \
	done

	uninstall:
	@$(MAKE) prefixcheck
	for cat in $(MOFILES) $(MOCONVERTED); do \
	cat=`basename $$cat`; \
	lang=`echo $$cat \| sed 's/\$(CATOBJEXT)$$//'`; \
	rm -f $(LOCALEDIR)/$$lang/LC_MESSAGES/$(PACKAGE).mo; \
	done

	# installing for local tryout into ../../runtime/lang
	tryoutinstall: $(MOFILES) $(MOCONVERTED)
	@$(MAKE) prefixcheck
	for lang in $(LANGUAGES); do \
	dir=../../runtime/lang/$$lang/; \
	if test ! -x "$$dir"; then \
	mkdir $$dir; chmod 755 $$dir; \
	fi; \
	dir=../../runtime/lang/$$lang/LC_MESSAGES; \
	if test ! -x "$$dir"; then \
	mkdir $$dir; chmod 755 $$dir; \
	fi; \
	if test -r $$lang.mo; then \
	cp $$lang.mo $$dir/$(PACKAGE).mo; \
	chmod 644 $$dir/$(PACKAGE).mo; \
	fi; \
	done

	converted: $(MOCONVERTED)

	# nl.po was added later, if it does not exist use a file with just a # in it
	# (an empty file doesn't work with old msgfmt).
	nl.po:
	@( echo \# > nl.po )

	# Norwegian/Bokmal: "nb" is an alias for "no".
	# Copying the file is not efficient, but I don't know of another way to make
	# this work.
	nb.po: no.po
	cp no.po nb.po

	# Convert ja.po to create ja.sjis.po. Requires doubling backslashes in the
	# second byte. Don't depend on sjiscorr, it should only be compiled when
	# ja.sjis.po is outdated.
	ja.sjis.po: ja.po
	@$(MAKE) sjiscorr
	rm -f ja.sjis.po
	iconv -f utf-8 -t cp932 ja.po \| ./sjiscorr > ja.sjis.po

	sjiscorr: sjiscorr.c
	$(CC) -o sjiscorr sjiscorr.c

	ja.euc-jp.po: ja.po
	iconv -f utf-8 -t euc-jp ja.po \| \
	sed -e 's/charset=[uU][tT][fF]-8/charset=euc-jp/' -e 's/# Original translations/# Generated from ja.po, DO NOT EDIT/' > ja.euc-jp.po

	# Convert cs.po to create cs.cp1250.po.
	cs.cp1250.po: cs.po
	rm -f cs.cp1250.po
	iconv -f iso-8859-2 -t cp1250 cs.po \| \
	sed -e 's/charset=ISO-8859-2/charset=cp1250/' -e 's/# Original translations/# Generated from cs.po, DO NOT EDIT/' > cs.cp1250.po

	# Convert pl.po to create pl.cp1250.po.
	pl.cp1250.po: pl.po
	rm -f pl.cp1250.po
	iconv -f iso-8859-2 -t cp1250 pl.po \| \
	sed -e 's/charset=ISO-8859-2/charset=cp1250/' -e 's/# Original translations/# Generated from pl.po, DO NOT EDIT/' > pl.cp1250.po

	# Convert pl.po to create pl.UTF-8.po.
	pl.UTF-8.po: pl.po
	rm -f pl.UTF-8.po
	iconv -f iso-8859-2 -t utf-8 pl.po \| \
	sed -e 's/charset=ISO-8859-2/charset=UTF-8/' -e 's/# Original translations/# Generated from pl.po, DO NOT EDIT/' > pl.UTF-8.po

	# Convert sk.po to create sk.cp1250.po.
	sk.cp1250.po: sk.po
	rm -f sk.cp1250.po
	iconv -f iso-8859-2 -t cp1250 sk.po \| \
	sed -e 's/charset=ISO-8859-2/charset=cp1250/' -e 's/# Original translations/# Generated from sk.po, DO NOT EDIT/' > sk.cp1250.po

	# Convert zh_CN.UTF-8.po to create zh_CN.po.
	zh_CN.po: zh_CN.UTF-8.po
	rm -f zh_CN.po
	iconv -f UTF-8 -t gb2312 zh_CN.UTF-8.po \| \
	sed -e 's/charset=[uU][tT][fF]-8/charset=gb2312/' -e 's/# Original translations/# Generated from zh_CN.UTF-8.po, DO NOT EDIT/' > zh_CN.po

	# Convert zh_CN.UTF-8.po to create zh_CN.cp936.po.
	# Set 'charset' to gbk to avoid that msfmt generates a warning.
	# This used to convert from zh_CN.po, but that results in a conversion error.
	zh_CN.cp936.po: zh_CN.UTF-8.po
	rm -f zh_CN.cp936.po
	iconv -f UTF-8 -t cp936 zh_CN.UTF-8.po \| \
	sed -e 's/charset=[uU][tT][fF]-8/charset=gbk/' -e 's/# Original translations/# Generated from zh_CN.UTF-8.po, DO NOT EDIT/' > zh_CN.cp936.po

	# Convert ko.UTF-8.po to create ko.po.
	ko.po: ko.UTF-8.po
	rm -f ko.po
	iconv -f UTF-8 -t euc-kr ko.UTF-8.po \| \
	sed -e 's/charset=UTF-8/charset=euc-kr/' \
	-e 's/# Korean translation for Vim/# Generated from ko.UTF-8.po, DO NOT EDIT/' \
	> ko.po

	# Convert ru.po to create ru.cp1251.po.
	ru.cp1251.po: ru.po
	rm -f ru.cp1251.po
	iconv -f utf-8 -t cp1251 ru.po \| \
	sed -e 's/charset=[uU][tT][fF]-8/charset=cp1251/' -e 's/# Original translations/# Generated from ru.po, DO NOT EDIT/' > ru.cp1251.po

	# Convert uk.po to create uk.cp1251.po.
	uk.cp1251.po: uk.po
	rm -f uk.cp1251.po
	iconv -f utf-8 -t cp1251 uk.po \| \
	sed -e 's/charset=[uU][tT][fF]-8/charset=cp1251/' -e 's/# Original translations/# Generated from uk.po, DO NOT EDIT/' > uk.cp1251.po

	prefixcheck:
	@if test "x" = "x$(prefix)"; then \
	echo "******************************************"; \
	echo " please use make from the src directory "; \
	echo "******************************************"; \
	exit 1; \
	fi

	clean: checkclean
	rm -f core core.* .old.po .mo *.pot sjiscorr
	rm -f LINGUAS vim.desktop gvim.desktop tmp_*desktop

	distclean: clean

	checkclean:
	rm -f *.ck

	PO_INPUTLIST = \
	../*.c \
	../if_perl.xs \
	../GvimExt/gvimext.cpp \
	../errors.h \
	../globals.h \
	../if_py_both.h \
	../vim.h \
	gvim.desktop.in \
	vim.desktop.in

	PO_VIM_INPUTLIST = \
	../../runtime/optwin.vim

	PO_VIM_JSLIST = \
	optwin.js

	$(PACKAGE).pot: $(PO_INPUTLIST) $(PO_VIM_INPUTLIST)
	# Convert the Vim scripts to (what looks like) Javascript
	$(VIM) -u NONE --not-a-term -S tojavascript.vim $(PACKAGE).pot $(PO_VIM_INPUTLIST)
	# create vim.pot
	$(XGETTEXT) --default-domain=$(PACKAGE) --add-comments \
	--keyword=_ --keyword=N_ --keyword=NGETTEXT:1,2 \
	$(PO_INPUTLIST) $(PO_VIM_JSLIST)
	mv -f $(PACKAGE).po $(PACKAGE).pot
	# Fix Vim scripts names, so that "gf" works
	$(VIM) -u NONE --not-a-term -S fixfilenames.vim $(PACKAGE).pot $(PO_VIM_INPUTLIST)
	# Delete the temporary files
	rm *.js

	vim.desktop: vim.desktop.in $(POFILES)
	echo $(LANGUAGES) \| tr " " "\n" \|sed -e '/\./d' \| sort > LINGUAS
	$(MSGFMT) --desktop -d . --template vim.desktop.in -o tmp_vim.desktop
	rm -f LINGUAS
	if command -v desktop-file-validate; then desktop-file-validate tmp_vim.desktop; fi
	mv tmp_vim.desktop vim.desktop

	# The dependency on vim.desktop is only to avoid the two targets are build at
	# the same time, which causes a race for the LINGUAS file.
	gvim.desktop: gvim.desktop.in $(POFILES) vim.desktop
	echo $(LANGUAGES) \| tr " " "\n" \|sed -e '/\./d' \| sort > LINGUAS
	$(MSGFMT) --desktop -d . --template gvim.desktop.in -o tmp_gvim.desktop
	rm -f LINGUAS
	if command -v desktop-file-validate; then desktop-file-validate tmp_gvim.desktop; fi
	mv tmp_gvim.desktop gvim.desktop

	update-po: $(LANGUAGES)

	# Don't add a dependency here, we only want to update the .po files manually
	$(LANGUAGES):
	@$(MAKE) $(PACKAGE).pot
	if test ! -f $@.po.orig; then cp $@.po $@.po.orig; fi
	mv $@.po $@.po.old
	if $(MSGMERGE) $@.po.old $(PACKAGE).pot -o $@.po; then \
	rm -f $@.po.old; \
	else \
	echo "msgmerge for $@.po failed!"; mv $@.po.old $@.po; \
	fi