Gitiles
Code Review Sign In
gerrit.omnirom.org / android_external_vim / 9c9be05b17ececb1515a2f41a4dedbf848d3d8b6 / . / runtime / doc / usr_41.txt
blob: eb269e16cb2edb1cb795e34eaae542b2e0dbf066 [file] [log] [blame]
*usr_41.txt* For Vim version 8.2. Last change: 2022 Feb 11
VIM USER MANUAL - by Bram Moolenaar
Write a Vim script
The Vim script language is used for the startup vimrc file, syntax files, and
many other things. This chapter explains the items that can be used in a Vim
script. There are a lot of them, thus this is a long chapter.
|41.1| Introduction
|41.2| Variables
|41.3| Expressions
|41.4| Conditionals
|41.5| Executing an expression
|41.6| Using functions
|41.7| Defining a function
|41.8| Lists and Dictionaries
|41.9| Exceptions
|41.10| Various remarks
|41.11| Writing a plugin
|41.12| Writing a filetype plugin
|41.13| Writing a compiler plugin
|41.14| Writing a plugin that loads quickly
|41.15| Writing library scripts
|41.16| Distributing Vim scripts
Next chapter: |usr_42.txt| Add new menus
Previous chapter: |usr_40.txt| Make new commands
Table of contents: |usr_toc.txt|
==============================================================================
*41.1* Introduction *vim-script-intro* *script*
Your first experience with Vim scripts is the vimrc file. Vim reads it when
it starts up and executes the commands. You can set options to values you
prefer. And you can use any colon command in it (commands that start with a
":"; these are sometimes referred to as Ex commands or command-line commands).
Syntax files are also Vim scripts. As are files that set options for a
specific file type. A complicated macro can be defined by a separate Vim
script file. You can think of other uses yourself.
If you are familiar with Python, you can find a comparison between
Python and Vim script here, with pointers to other documents:
https://gist.github.com/yegappan/16d964a37ead0979b05e655aa036cad0
And if you are familiar with JavaScript:
https://w0rp.com/blog/post/vim-script-for-the-javascripter/
Vim script comes in two flavors: legacy and |Vim9|. Since this help file is
for new users, we'll teach you the newer and more convenient |Vim9| syntax.
To try out Vim script the best way is to edit a script file and source it.
Basically: >
:edit test.vim
[insert the script lines you want]
:w
:source %
Let's start with a simple example: >
vim9script
var i = 1
while i < 5
echo "count is" i
i += 1
endwhile
<
The output of the example code is:
count is 1 ~
count is 2 ~
count is 3 ~
count is 4 ~
In the first line the `vim9script` command makes clear this is a new, |Vim9|
script file. That matters for how the rest of the file is used.
The `var i = 1` command declares the "i" variable and initializes it. The
generic form is: >
var {name} = {expression}
In this case the variable name is "i" and the expression is a simple value,
the number one.
The `while` command starts a loop. The generic form is: >
while {condition}
{statements}
endwhile
The statements until the matching `endwhile` are executed for as long as the
condition is true. The condition used here is the expression "i < 5". This
is true when the variable i is smaller than five.
Note:
If you happen to write a while loop that keeps on running, you can
interrupt it by pressing CTRL-C (CTRL-Break on MS-Windows).
The `echo` command prints its arguments. In this case the string "count is"
and the value of the variable i. Since i is one, this will print:
count is 1 ~
Then there is the `i += 1` command. This does the same thing as "i = i + 1",
it adds one to the variable i and assigns the new value to the same variable.
The example was given to explain the commands, but would you really want to
make such a loop, it can be written much more compact: >
for i in range(1, 4)
echo "count is" i
endfor
We won't explain how `for` and `range()` work until later. Follow the links
if you are impatient.
FOUR KINDS OF NUMBERS
Numbers can be decimal, hexadecimal, octal or binary.
A hexadecimal number starts with "0x" or "0X". For example "0x1f" is decimal
31.
An octal number starts with "0o", "0O". "0o17" is decimal 15.
A binary number starts with "0b" or "0B". For example "0b101" is decimal 5.
A decimal number is just digits. Careful: In legacy script don't put a zero
before a decimal number, it will be interpreted as an octal number!
The `echo` command evaluates its argument and always prints decimal numbers.
Example: >
echo 0x7f 0o36
< 127 30 ~
A number is made negative with a minus sign. This also works for hexadecimal,
octal and binary numbers: >
echo -0x7f
< -127 ~
A minus sign is also used for subtraction. This can sometimes lead to
confusion. If we put a minus sign before both numbers we get an error: >
echo -0x7f -0o36
< E1004: White space required before and after '-' at "-0o36" ~
Note: if you are not using a |Vim9| script to try out these commands but type
them directly, they will be executed as legacy script. Then the echo command
sees the second minus sign as subtraction. To get the error, prefix the
command with `vim9cmd`: >
vim9cmd echo -0x7f -0o36
< E1004: White space required before and after '-' at "-0o36" ~
White space in an expression is often required to make sure it is easy to read
and avoid errors. Such as thinking that the "-0o36" above makes the number
negative, while it is actually seen as a subtraction.
To actually have the minus sign be used for negation, you can put the second
expression in parentheses: >
echo -0x7f (-0o36)
==============================================================================
*41.2* Variables
A variable name consists of ASCII letters, digits and the underscore. It
cannot start with a digit. Valid variable names are:
counter
_aap3
very_long_variable_name_with_underscores
FuncLength
LENGTH
Invalid names are "foo+bar" and "6var".
Some variables are global. To see a list of currently defined global
variables type this command: >
:let
You can use global variables everywhere. However, it is easy to use the same
name in two unrelated scripts. Therefore variables declared in a script are
local to that script. For example, if you have this in "script1.vim": >
vim9script
var counter = 5
echo counter
< 5 ~
And you try to use the variable in "script2.vim": >
vim9script
echo counter
< E121: Undefined variable: counter ~
Using a script-local variable means you can be sure that it is only changed in
that script and not elsewhere.
If you do want to share variables between scripts, use the "g:" prefix and
assign the value directly, do not use `var`. Thus in "script1.vim": >
vim9script
g:counter = 5
echo g:counter
< 5 ~
And then in "script2.vim": >
vim9script
echo g:counter
< 5 ~
More about script-local variables here: |script-variable|.
There are more kinds of variables, see |internal-variables|. The most often
used ones are:
b:name variable local to a buffer
w:name variable local to a window
g:name global variable (also in a function)
v:name variable predefined by Vim
DELETING VARIABLES
Variables take up memory and show up in the output of the `let` command. To
delete a global variable use the `unlet` command. Example: >
unlet g:counter
This deletes the global variable "g:counter" to free up the memory it uses.
If you are not sure if the variable exists, and don't want an error message
when it doesn't, append !: >
unlet! g:counter
You cannot `unlet` script-local variables in |Vim9| script. You can in legacy
script.
When a script finishes, the local variables declared there will not be
deleted. Functions defined in the script can use them. Example:
>
vim9script
var counter = 0
def g:GetCount(): number
s:counter += 1
return s:counter
enddef
Every time you call the function it will return the next count: >
:echo g:GetCount()
< 1 ~
>
:echo g:GetCount()
< 2 ~
If you are worried a script-local variable is consuming too much
memory, set it to an empty value after you no longer need it.
Note: below we'll leave out the `vim9script` line, so we can concentrate on
the relevant commands, but you'll still need to put it at the top of your
script file.
STRING VARIABLES AND CONSTANTS
So far only numbers were used for the variable value. Strings can be used as
well. Numbers and strings are the basic types of variables that Vim supports.
Example: >
var name = "Peter"
echo name
< Peter ~
Every variable has a type. Very often, as in this example, the type is
defined by assigning a value. This is called type inference. If you do not
want to give the variable a value yet, you need to specify the type: >
var name: string
var age: number
...
name = "Peter"
age = 42
If you make a mistake and try to assign the wrong type of value you'll get an
error: >
age = "Peter"
< E1012: Type mismatch; expected number but got string ~
More about types in |41.8|.
To assign a string value to a variable, you need to use a string constant.
There are two types of these. First the string in double quotes, as we used
already. If you want to include a double quote inside the string, put a
backslash in front of it: >
var name = "he is \"Peter\""
echo name
< he is "Peter" ~
To avoid the need for a backslash, you can use a string in single quotes: >
var name = 'he is "Peter"'
echo name
< he is "Peter" ~
Inside a single-quote string all the characters are as they are. Only the
single quote itself is special: you need to use two to get one. A backslash
is taken literally, thus you can't use it to change the meaning of the
character after it: >
var name = 'P\e''ter'''
echo name
< P\e'ter' ~
In double-quote strings it is possible to use special characters. Here are a
few useful ones:
\t <Tab>
\n <NL>, line break
\r <CR>, <Enter>
\e <Esc>
\b <BS>, backspace
\" "
\\ \, backslash
\<Esc> <Esc>
\<C-W> CTRL-W
The last two are just examples. The "\<name>" form can be used to include
the special key "name".
See |expr-quote| for the full list of special items in a string.
==============================================================================
*41.3* Expressions
Vim has a fairly standard way to handle expressions. You can read the
definition here: |expression-syntax|. Here we will show the most common
items.
The numbers, strings and variables mentioned above are expressions by
themselves. Thus everywhere an expression is expected, you can use a number,
string or variable. Other basic items in an expression are:
$NAME environment variable
&name option
@r register
Examples: >
echo "The value of 'tabstop' is" &ts
echo "Your home directory is" $HOME
if @a == 'text'
The &name form can also be used to set an option value, do something and
restore the old value. Example: >
var save_ic = &ic
set noic
s/The Start/The Beginning/
&ic = save_ic
This makes sure the "The Start" pattern is used with the 'ignorecase' option
off. Still, it keeps the value that the user had set. (Another way to do
this would be to add "\C" to the pattern, see |/\C|.)
MATHEMATICS
It becomes more interesting if we combine these basic items. Let's start with
mathematics on numbers:
a + b add
a - b subtract
a * b multiply
a / b divide
a % b modulo
The usual precedence is used. Example: >
echo 10 + 5 * 2
< 20 ~
Grouping is done with parentheses. No surprises here. Example: >
echo (10 + 5) * 2
< 30 ~
Strings can be concatenated with ".." (see |expr6|). Example: >
echo "foo" .. "bar"
< foobar ~
When the "echo" command gets multiple arguments, it separates them with a
space. In the example the argument is a single expression, thus no space is
inserted.
Borrowed from the C language is the conditional expression: >
a ? b : c
If "a" evaluates to true "b" is used, otherwise "c" is used. Example: >
var nr = 4
echo nr > 5 ? "nr is big" : "nr is small"
< nr is small ~
The three parts of the constructs are always evaluated first, thus you could
see it works as: >
(a) ? (b) : (c)
==============================================================================
*41.4* Conditionals
The `if` commands executes the following statements, until the matching
`endif`, only when a condition is met. The generic form is:
if {condition}
{statements}
endif
Only when the expression {condition} evaluates to true or one will the
{statements} be executed. If they are not executed they must still be valid
commands. If they contain garbage, Vim won't be able to find the matching
`endif`.
You can also use `else`. The generic form for this is:
if {condition}
{statements}
else
{statements}
endif
The second {statements} block is only executed if the first one isn't.
Finally, there is `elseif`
if {condition}
{statements}
elseif {condition}
{statements}
endif
This works just like using `else` and then `if`, but without the need for an
extra `endif`.
A useful example for your vimrc file is checking the 'term' option and doing
something depending upon its value: >
if &term == "xterm"
# Do stuff for xterm
elseif &term == "vt100"
# Do stuff for a vt100 terminal
else
# Do something for other terminals
endif
This uses "#" to start a comment, more about that later.
LOGIC OPERATIONS
We already used some of them in the examples. These are the most often used
ones:
a == b equal to
a != b not equal to
a > b greater than
a >= b greater than or equal to
a < b less than
a <= b less than or equal to
The result is true if the condition is met and false otherwise. An example: >
if v:version >= 700
echo "congratulations"
else
echo "you are using an old version, upgrade!"
endif
Here "v:version" is a variable defined by Vim, which has the value of the Vim
version. 600 is for version 6.0, version 6.1 has the value 601. This is
very useful to write a script that works with multiple versions of Vim.
|v:version|
The logic operators work both for numbers and strings. When comparing two
strings, the mathematical difference is used. This compares byte values,
which may not be right for some languages.
If you try to compare a string with a number you will get an error.
For strings there are two more useful items:
str =~ pat matches with
str !~ pat does not match with
The left item "str" is used as a string. The right item "pat" is used as a
pattern, like what's used for searching. Example: >
if str =~ " "
echo "str contains a space"
endif
if str !~ '\.$'
echo "str does not end in a full stop"
endif
Notice the use of a single-quote string for the pattern. This is useful,
because backslashes would need to be doubled in a double-quote string and
patterns tend to contain many backslashes.
The match is not anchored, if you want to match the whole string start with
"^" and end with "$".
The 'ignorecase' option is not used when comparing strings. When you do want
to ignore case append "?". Thus "==?" compares two strings to be equal while
ignoring case. For the full table see |expr-==|.
MORE LOOPING
The `while` command was already mentioned. Two more statements can be used in
between the `while` and the `endwhile`:
continue Jump back to the start of the while loop; the
loop continues.
break Jump forward to the `endwhile`; the loop is
discontinued.
Example: >
var counter = 1
while counter < 40
if skip_number(counter)
continue
endif
if last_number(counter)
break
endif
sleep 50m
++counter
endwhile
The `sleep` command makes Vim take a nap. The "50m" specifies fifty
milliseconds. Another example is `sleep 4`, which sleeps for four seconds.
Even more looping can be done with the `for` command, see below in |41.8|.
==============================================================================
*41.5* Executing an expression
So far the commands in the script were executed by Vim directly. The
`execute` command allows executing the result of an expression. This is a
very powerful way to build commands and execute them.
An example is to jump to a tag, which is contained in a variable: >
execute "tag " .. tag_name
The ".." is used to concatenate the string "tag " with the value of variable
"tag_name". Suppose "tag_name" has the value "get_cmd", then the command that
will be executed is: >
tag get_cmd
The `execute` command can only execute Ex commands. The `normal` command
executes Normal mode commands. However, its argument is not an expression but
the literal command characters. Example: >
normal gg=G
This jumps to the first line with "gg" and formats all lines with the "="
operator and the "G" movement.
To make `normal` work with an expression, combine `execute` with it.
Example: >
execute "normal " .. count .. "j"
This will move the cursor "count" lines down.
Make sure that the argument for `normal` is a complete command. Otherwise
Vim will run into the end of the argument and abort the command. For example,
if you start the delete operator, you must give the movement command also.
This works: >
normal d$
This does nothing: >
normal d
If you start Insert mode and do not end it with Esc, it will end anyway. This
works to insert "new text": >
execute "normal inew text"
If you want to do something after inserting text you do need to end Insert
mode: >
execute "normal inew text\<Esc>b"
This inserts "new text" and puts the cursor on the first letter of "text".
Notice the use of the special key "\<Esc>". This avoids having to enter a
real <Esc> character in your script. That is where `execute` with a
double-quote string comes in handy.
If you don't want to execute a string but evaluate it to get its expression
value, you can use the eval() function: >
var optname = "path"
var optvalue = eval('&' .. optname)
A "&" character is prepended to "path", thus the argument to eval() is
"&path". The result will then be the value of the 'path' option.
==============================================================================
*41.6* Using functions
Vim defines many functions and provides a large amount of functionality that
way. A few examples will be given in this section. You can find the whole
list below: |function-list|.
A function is called with the `call` command. The parameters are passed in
between parentheses separated by commas. Example: >
call search("Date: ", "W")
This calls the search() function, with arguments "Date: " and "W". The
search() function uses its first argument as a search pattern and the second
one as flags. The "W" flag means the search doesn't wrap around the end of
the file.
Using `call` is optional in |Vim9| script, this works the same way: >
search("Date: ", "W")
A function can be called in an expression. Example: >
var line = getline(".")
var repl = substitute(line, '\a', "*", "g")
setline(".", repl)
The getline() function obtains a line from the current buffer. Its argument
is a specification of the line number. In this case "." is used, which means
the line where the cursor is.
The substitute() function does something similar to the `substitute` command.
The first argument is the string on which to perform the substitution. The
second argument is the pattern, the third the replacement string. Finally,
the last arguments are the flags.
The setline() function sets the line, specified by the first argument, to a
new string, the second argument. In this example the line under the cursor is
replaced with the result of the substitute(). Thus the effect of the three
statements is equal to: >
:substitute/\a/*/g
Using the functions becomes more interesting when you do more work before and
after the substitute() call.
FUNCTIONS *function-list*
There are many functions. We will mention them here, grouped by what they are
used for. You can find an alphabetical list here: |builtin-function-list|.
Use CTRL-] on the function name to jump to detailed help on it.
String manipulation: *string-functions*
nr2char() get a character by its number value
list2str() get a character string from a list of numbers
char2nr() get number value of a character
str2list() get list of numbers from a string
str2nr() convert a string to a Number
str2float() convert a string to a Float
printf() format a string according to % items
escape() escape characters in a string with a '\'
shellescape() escape a string for use with a shell command
fnameescape() escape a file name for use with a Vim command
tr() translate characters from one set to another
strtrans() translate a string to make it printable
tolower() turn a string to lowercase
toupper() turn a string to uppercase
charclass() class of a character
match() position where a pattern matches in a string
matchend() position where a pattern match ends in a string
matchfuzzy() fuzzy matches a string in a list of strings
matchfuzzypos() fuzzy matches a string in a list of strings
matchstr() match of a pattern in a string
matchstrpos() match and positions of a pattern in a string
matchlist() like matchstr() and also return submatches
stridx() first index of a short string in a long string
strridx() last index of a short string in a long string
strlen() length of a string in bytes
strcharlen() length of a string in characters
strchars() number of characters in a string
strwidth() size of string when displayed
strdisplaywidth() size of string when displayed, deals with tabs
setcellwidths() set character cell width overrides
substitute() substitute a pattern match with a string
submatch() get a specific match in ":s" and substitute()
strpart() get part of a string using byte index
strcharpart() get part of a string using char index
slice() take a slice of a string, using char index in
Vim9 script
strgetchar() get character from a string using char index
expand() expand special keywords
expandcmd() expand a command like done for `:edit`
iconv() convert text from one encoding to another
byteidx() byte index of a character in a string
byteidxcomp() like byteidx() but count composing characters
charidx() character index of a byte in a string
repeat() repeat a string multiple times
eval() evaluate a string expression
execute() execute an Ex command and get the output
win_execute() like execute() but in a specified window
trim() trim characters from a string
gettext() lookup message translation
List manipulation: *list-functions*
get() get an item without error for wrong index
len() number of items in a List
empty() check if List is empty
insert() insert an item somewhere in a List
add() append an item to a List
extend() append a List to a List
extendnew() make a new List and append items
remove() remove one or more items from a List
copy() make a shallow copy of a List
deepcopy() make a full copy of a List
filter() remove selected items from a List
map() change each List item
mapnew() make a new List with changed items
reduce() reduce a List to a value
slice() take a slice of a List
sort() sort a List
reverse() reverse the order of a List
uniq() remove copies of repeated adjacent items
split() split a String into a List
join() join List items into a String
range() return a List with a sequence of numbers
string() String representation of a List
call() call a function with List as arguments
index() index of a value in a List
max() maximum value in a List
min() minimum value in a List
count() count number of times a value appears in a List
repeat() repeat a List multiple times
flatten() flatten a List
flattennew() flatten a copy of a List
Dictionary manipulation: *dict-functions*
get() get an entry without an error for a wrong key
len() number of entries in a Dictionary
has_key() check whether a key appears in a Dictionary
empty() check if Dictionary is empty
remove() remove an entry from a Dictionary
extend() add entries from one Dictionary to another
extendnew() make a new Dictionary and append items
filter() remove selected entries from a Dictionary
map() change each Dictionary entry
mapnew() make a new Dictionary with changed items
keys() get List of Dictionary keys
values() get List of Dictionary values
items() get List of Dictionary key-value pairs
copy() make a shallow copy of a Dictionary
deepcopy() make a full copy of a Dictionary
string() String representation of a Dictionary
max() maximum value in a Dictionary
min() minimum value in a Dictionary
count() count number of times a value appears
Floating point computation: *float-functions*
float2nr() convert Float to Number
abs() absolute value (also works for Number)
round() round off
ceil() round up
floor() round down
trunc() remove value after decimal point
fmod() remainder of division
exp() exponential
log() natural logarithm (logarithm to base e)
log10() logarithm to base 10
pow() value of x to the exponent y
sqrt() square root
sin() sine
cos() cosine
tan() tangent
asin() arc sine
acos() arc cosine
atan() arc tangent
atan2() arc tangent
sinh() hyperbolic sine
cosh() hyperbolic cosine
tanh() hyperbolic tangent
isinf() check for infinity
isnan() check for not a number
Blob manipulation: *blob-functions*
blob2list() get a list of numbers from a blob
list2blob() get a blob from a list of numbers
Other computation: *bitwise-function*
and() bitwise AND
invert() bitwise invert
or() bitwise OR
xor() bitwise XOR
sha256() SHA-256 hash
rand() get a pseudo-random number
srand() initialize seed used by rand()
Variables: *var-functions*
type() type of a variable as a number
typename() type of a variable as text
islocked() check if a variable is locked
funcref() get a Funcref for a function reference
function() get a Funcref for a function name
getbufvar() get a variable value from a specific buffer
setbufvar() set a variable in a specific buffer
getwinvar() get a variable from specific window
gettabvar() get a variable from specific tab page
gettabwinvar() get a variable from specific window & tab page
setwinvar() set a variable in a specific window
settabvar() set a variable in a specific tab page
settabwinvar() set a variable in a specific window & tab page
garbagecollect() possibly free memory
Cursor and mark position: *cursor-functions* *mark-functions*
col() column number of the cursor or a mark
virtcol() screen column of the cursor or a mark
line() line number of the cursor or mark
wincol() window column number of the cursor
winline() window line number of the cursor
cursor() position the cursor at a line/column
screencol() get screen column of the cursor
screenrow() get screen row of the cursor
screenpos() screen row and col of a text character
getcurpos() get position of the cursor
getpos() get position of cursor, mark, etc.
setpos() set position of cursor, mark, etc.
getmarklist() list of global/local marks
byte2line() get line number at a specific byte count
line2byte() byte count at a specific line
diff_filler() get the number of filler lines above a line
screenattr() get attribute at a screen line/row
screenchar() get character code at a screen line/row
screenchars() get character codes at a screen line/row
screenstring() get string of characters at a screen line/row
charcol() character number of the cursor or a mark
getcharpos() get character position of cursor, mark, etc.
setcharpos() set character position of cursor, mark, etc.
getcursorcharpos() get character position of the cursor
setcursorcharpos() set character position of the cursor
Working with text in the current buffer: *text-functions*
getline() get a line or list of lines from the buffer
setline() replace a line in the buffer
append() append line or list of lines in the buffer
indent() indent of a specific line
cindent() indent according to C indenting
lispindent() indent according to Lisp indenting
nextnonblank() find next non-blank line
prevnonblank() find previous non-blank line
search() find a match for a pattern
searchpos() find a match for a pattern
searchcount() get number of matches before/after the cursor
searchpair() find the other end of a start/skip/end
searchpairpos() find the other end of a start/skip/end
searchdecl() search for the declaration of a name
getcharsearch() return character search information
setcharsearch() set character search information
Working with text in another buffer:
getbufline() get a list of lines from the specified buffer
setbufline() replace a line in the specified buffer
appendbufline() append a list of lines in the specified buffer
deletebufline() delete lines from a specified buffer
*system-functions* *file-functions*
System functions and manipulation of files:
glob() expand wildcards
globpath() expand wildcards in a number of directories
glob2regpat() convert a glob pattern into a search pattern
findfile() find a file in a list of directories
finddir() find a directory in a list of directories
resolve() find out where a shortcut points to
fnamemodify() modify a file name
pathshorten() shorten directory names in a path
simplify() simplify a path without changing its meaning
executable() check if an executable program exists
exepath() full path of an executable program
filereadable() check if a file can be read
filewritable() check if a file can be written to
getfperm() get the permissions of a file
setfperm() set the permissions of a file
getftype() get the kind of a file
isdirectory() check if a directory exists
getfsize() get the size of a file
getcwd() get the current working directory
haslocaldir() check if current window used |:lcd| or |:tcd|
tempname() get the name of a temporary file
mkdir() create a new directory
chdir() change current working directory
delete() delete a file
rename() rename a file
system() get the result of a shell command as a string
systemlist() get the result of a shell command as a list
environ() get all environment variables
getenv() get one environment variable
setenv() set an environment variable
hostname() name of the system
readfile() read a file into a List of lines
readblob() read a file into a Blob
readdir() get a List of file names in a directory
readdirex() get a List of file information in a directory
writefile() write a List of lines or Blob into a file
Date and Time: *date-functions* *time-functions*
getftime() get last modification time of a file
localtime() get current time in seconds
strftime() convert time to a string
strptime() convert a date/time string to time
reltime() get the current or elapsed time accurately
reltimestr() convert reltime() result to a string
reltimefloat() convert reltime() result to a Float
*buffer-functions* *window-functions* *arg-functions*
Buffers, windows and the argument list:
argc() number of entries in the argument list
argidx() current position in the argument list
arglistid() get id of the argument list
argv() get one entry from the argument list
bufadd() add a file to the list of buffers
bufexists() check if a buffer exists
buflisted() check if a buffer exists and is listed
bufload() ensure a buffer is loaded
bufloaded() check if a buffer exists and is loaded
bufname() get the name of a specific buffer
bufnr() get the buffer number of a specific buffer
tabpagebuflist() return List of buffers in a tab page
tabpagenr() get the number of a tab page
tabpagewinnr() like winnr() for a specified tab page
winnr() get the window number for the current window
bufwinid() get the window ID of a specific buffer
bufwinnr() get the window number of a specific buffer
winbufnr() get the buffer number of a specific window
listener_add() add a callback to listen to changes
listener_flush() invoke listener callbacks
listener_remove() remove a listener callback
win_findbuf() find windows containing a buffer
win_getid() get window ID of a window
win_gettype() get type of window
win_gotoid() go to window with ID
win_id2tabwin() get tab and window nr from window ID
win_id2win() get window nr from window ID
win_move_separator() move window vertical separator
win_move_statusline() move window status line
win_splitmove() move window to a split of another window
getbufinfo() get a list with buffer information
gettabinfo() get a list with tab page information
getwininfo() get a list with window information
getchangelist() get a list of change list entries
getjumplist() get a list of jump list entries
swapinfo() information about a swap file
swapname() get the swap file path of a buffer
Command line: *command-line-functions*
getcmdline() get the current command line
getcmdpos() get position of the cursor in the command line
setcmdpos() set position of the cursor in the command line
getcmdtype() return the current command-line type
getcmdwintype() return the current command-line window type
getcompletion() list of command-line completion matches
fullcommand() get full command name
Quickfix and location lists: *quickfix-functions*
getqflist() list of quickfix errors
setqflist() modify a quickfix list
getloclist() list of location list items
setloclist() modify a location list
Insert mode completion: *completion-functions*
complete() set found matches
complete_add() add to found matches
complete_check() check if completion should be aborted
complete_info() get current completion information
pumvisible() check if the popup menu is displayed
pum_getpos() position and size of popup menu if visible
Folding: *folding-functions*
foldclosed() check for a closed fold at a specific line
foldclosedend() like foldclosed() but return the last line
foldlevel() check for the fold level at a specific line
foldtext() generate the line displayed for a closed fold
foldtextresult() get the text displayed for a closed fold
Syntax and highlighting: *syntax-functions* *highlighting-functions*
clearmatches() clear all matches defined by |matchadd()| and
the |:match| commands
getmatches() get all matches defined by |matchadd()| and
the |:match| commands
hlexists() check if a highlight group exists
hlget() get highlight group attributes
hlset() set highlight group attributes
hlID() get ID of a highlight group
synID() get syntax ID at a specific position
synIDattr() get a specific attribute of a syntax ID
synIDtrans() get translated syntax ID
synstack() get list of syntax IDs at a specific position
synconcealed() get info about concealing
diff_hlID() get highlight ID for diff mode at a position
matchadd() define a pattern to highlight (a "match")
matchaddpos() define a list of positions to highlight
matcharg() get info about |:match| arguments
matchdelete() delete a match defined by |matchadd()| or a
|:match| command
setmatches() restore a list of matches saved by
|getmatches()|
Spelling: *spell-functions*
spellbadword() locate badly spelled word at or after cursor
spellsuggest() return suggested spelling corrections
soundfold() return the sound-a-like equivalent of a word
History: *history-functions*
histadd() add an item to a history
histdel() delete an item from a history
histget() get an item from a history
histnr() get highest index of a history list
Interactive: *interactive-functions*
browse() put up a file requester
browsedir() put up a directory requester
confirm() let the user make a choice
getchar() get a character from the user
getcharstr() get a character from the user as a string
getcharmod() get modifiers for the last typed character
getmousepos() get last known mouse position
echoraw() output characters as-is
feedkeys() put characters in the typeahead queue
input() get a line from the user
inputlist() let the user pick an entry from a list
inputsecret() get a line from the user without showing it
inputdialog() get a line from the user in a dialog
inputsave() save and clear typeahead
inputrestore() restore typeahead
GUI: *gui-functions*
getfontname() get name of current font being used
getwinpos() position of the Vim window
getwinposx() X position of the Vim window
getwinposy() Y position of the Vim window
balloon_show() set the balloon content
balloon_split() split a message for a balloon
balloon_gettext() get the text in the balloon
Vim server: *server-functions*
serverlist() return the list of server names
remote_startserver() run a server
remote_send() send command characters to a Vim server
remote_expr() evaluate an expression in a Vim server
server2client() send a reply to a client of a Vim server
remote_peek() check if there is a reply from a Vim server
remote_read() read a reply from a Vim server
foreground() move the Vim window to the foreground
remote_foreground() move the Vim server window to the foreground
Window size and position: *window-size-functions*
winheight() get height of a specific window
winwidth() get width of a specific window
win_screenpos() get screen position of a window
winlayout() get layout of windows in a tab page
winrestcmd() return command to restore window sizes
winsaveview() get view of current window
winrestview() restore saved view of current window
Mappings and Menus: *mapping-functions*
digraph_get() get |digraph|
digraph_getlist() get all |digraph|s
digraph_set() register |digraph|
digraph_setlist() register multiple |digraph|s
hasmapto() check if a mapping exists
mapcheck() check if a matching mapping exists
maparg() get rhs of a mapping
mapset() restore a mapping
menu_info() get information about a menu item
wildmenumode() check if the wildmode is active
Testing: *test-functions*
assert_equal() assert that two expressions values are equal
assert_equalfile() assert that two file contents are equal
assert_notequal() assert that two expressions values are not equal
assert_inrange() assert that an expression is inside a range
assert_match() assert that a pattern matches the value
assert_notmatch() assert that a pattern does not match the value
assert_false() assert that an expression is false
assert_true() assert that an expression is true
assert_exception() assert that a command throws an exception
assert_beeps() assert that a command beeps
assert_nobeep() assert that a command does not cause a beep
assert_fails() assert that a command fails
assert_report() report a test failure
test_alloc_fail() make memory allocation fail
test_autochdir() enable 'autochdir' during startup
test_override() test with Vim internal overrides
test_garbagecollect_now() free memory right now
test_garbagecollect_soon() set a flag to free memory soon
test_getvalue() get value of an internal variable
test_gui_event() generate a GUI event for testing
test_ignore_error() ignore a specific error message
test_null_blob() return a null Blob
test_null_channel() return a null Channel
test_null_dict() return a null Dict
test_null_function() return a null Funcref
test_null_job() return a null Job
test_null_list() return a null List
test_null_partial() return a null Partial function
test_null_string() return a null String
test_settime() set the time Vim uses internally
test_setmouse() set the mouse position
test_feedinput() add key sequence to input buffer
test_option_not_set() reset flag indicating option was set
test_refcount() return an expression's reference count
test_srand_seed() set the seed value for srand()
test_unknown() return a value with unknown type
test_void() return a value with void type
Inter-process communication: *channel-functions*
ch_canread() check if there is something to read
ch_open() open a channel
ch_close() close a channel
ch_close_in() close the in part of a channel
ch_read() read a message from a channel
ch_readblob() read a Blob from a channel
ch_readraw() read a raw message from a channel
ch_sendexpr() send a JSON message over a channel
ch_sendraw() send a raw message over a channel
ch_evalexpr() evaluate an expression over channel
ch_evalraw() evaluate a raw string over channel
ch_status() get status of a channel
ch_getbufnr() get the buffer number of a channel
ch_getjob() get the job associated with a channel
ch_info() get channel information
ch_log() write a message in the channel log file
ch_logfile() set the channel log file
ch_setoptions() set the options for a channel
json_encode() encode an expression to a JSON string
json_decode() decode a JSON string to Vim types
js_encode() encode an expression to a JSON string
js_decode() decode a JSON string to Vim types
Jobs: *job-functions*
job_start() start a job
job_stop() stop a job
job_status() get the status of a job
job_getchannel() get the channel used by a job
job_info() get information about a job
job_setoptions() set options for a job
Signs: *sign-functions*
sign_define() define or update a sign
sign_getdefined() get a list of defined signs
sign_getplaced() get a list of placed signs
sign_jump() jump to a sign
sign_place() place a sign
sign_placelist() place a list of signs
sign_undefine() undefine a sign
sign_unplace() unplace a sign
sign_unplacelist() unplace a list of signs
Terminal window: *terminal-functions*
term_start() open a terminal window and run a job
term_list() get the list of terminal buffers
term_sendkeys() send keystrokes to a terminal
term_wait() wait for screen to be updated
term_getjob() get the job associated with a terminal
term_scrape() get row of a terminal screen
term_getline() get a line of text from a terminal
term_getattr() get the value of attribute {what}
term_getcursor() get the cursor position of a terminal
term_getscrolled() get the scroll count of a terminal
term_getaltscreen() get the alternate screen flag
term_getsize() get the size of a terminal
term_getstatus() get the status of a terminal
term_gettitle() get the title of a terminal
term_gettty() get the tty name of a terminal
term_setansicolors() set 16 ANSI colors, used for GUI
term_getansicolors() get 16 ANSI colors, used for GUI
term_dumpdiff() display difference between two screen dumps
term_dumpload() load a terminal screen dump in a window
term_dumpwrite() dump contents of a terminal screen to a file
term_setkill() set signal to stop job in a terminal
term_setrestore() set command to restore a terminal
term_setsize() set the size of a terminal
term_setapi() set terminal JSON API function name prefix
Popup window: *popup-window-functions*
popup_create() create popup centered in the screen
popup_atcursor() create popup just above the cursor position,
closes when the cursor moves away
popup_beval() at the position indicated by v:beval_
variables, closes when the mouse moves away
popup_notification() show a notification for three seconds
popup_dialog() create popup centered with padding and border
popup_menu() prompt for selecting an item from a list
popup_hide() hide a popup temporarily
popup_show() show a previously hidden popup
popup_move() change the position and size of a popup
popup_setoptions() override options of a popup
popup_settext() replace the popup buffer contents
popup_close() close one popup
popup_clear() close all popups
popup_filter_menu() select from a list of items
popup_filter_yesno() block until 'y' or 'n' is pressed
popup_getoptions() get current options for a popup
popup_getpos() get actual position and size of a popup
popup_findinfo() get window ID for popup info window
popup_findpreview() get window ID for popup preview window
popup_list() get list of all popup window IDs
popup_locate() get popup window ID from its screen position
Timers: *timer-functions*
timer_start() create a timer
timer_pause() pause or unpause a timer
timer_stop() stop a timer
timer_stopall() stop all timers
timer_info() get information about timers
Tags: *tag-functions*
taglist() get list of matching tags
tagfiles() get a list of tags files
gettagstack() get the tag stack of a window
settagstack() modify the tag stack of a window
Prompt Buffer: *promptbuffer-functions*
prompt_getprompt() get the effective prompt text for a buffer
prompt_setcallback() set prompt callback for a buffer
prompt_setinterrupt() set interrupt callback for a buffer
prompt_setprompt() set the prompt text for a buffer
Text Properties: *text-property-functions*
prop_add() attach a property at a position
prop_add_list() attach a property at multiple positions
prop_clear() remove all properties from a line or lines
prop_find() search for a property
prop_list() return a list of all properties in a line
prop_remove() remove a property from a line
prop_type_add() add/define a property type
prop_type_change() change properties of a type
prop_type_delete() remove a text property type
prop_type_get() return the properties of a type
prop_type_list() return a list of all property types
Sound: *sound-functions*
sound_clear() stop playing all sounds
sound_playevent() play an event's sound
sound_playfile() play a sound file
sound_stop() stop playing a sound
Various: *various-functions*
mode() get current editing mode
state() get current busy state
visualmode() last visual mode used
exists() check if a variable, function, etc. exists
exists_compiled() like exists() but check at compile time
has() check if a feature is supported in Vim
changenr() return number of most recent change
cscope_connection() check if a cscope connection exists
did_filetype() check if a FileType autocommand was used
eventhandler() check if invoked by an event handler
getpid() get process ID of Vim
getimstatus() check if IME status is active
interrupt() interrupt script execution
windowsversion() get MS-Windows version
terminalprops() properties of the terminal
libcall() call a function in an external library
libcallnr() idem, returning a number
undofile() get the name of the undo file
undotree() return the state of the undo tree
getreg() get contents of a register
getreginfo() get information about a register
getregtype() get type of a register
setreg() set contents and type of a register
reg_executing() return the name of the register being executed
reg_recording() return the name of the register being recorded
shiftwidth() effective value of 'shiftwidth'
wordcount() get byte/word/char count of buffer
luaeval() evaluate |Lua| expression
mzeval() evaluate |MzScheme| expression
perleval() evaluate Perl expression (|+perl|)
py3eval() evaluate Python expression (|+python3|)
pyeval() evaluate Python expression (|+python|)
pyxeval() evaluate |python_x| expression
rubyeval() evaluate |Ruby| expression
debugbreak() interrupt a program being debugged
==============================================================================
*41.7* Defining a function
Vim enables you to define your own functions. The basic function declaration
begins as follows: >
def {name}({var1}, {var2}, ...): return-type
{body}
enddef
<
Note:
Function names must begin with a capital letter.
Let's define a short function to return the smaller of two numbers. It starts
with this line: >
def Min(num1: number, num2: number): number
This tells Vim that the function is named "Min", it takes two arguments that
are numbers: "num1" and "num2" and returns a number.
The first thing you need to do is to check to see which number is smaller:
>
if num1 < num2
Let's assign the variable "smaller" the value of the smallest number: >
var smaller: number
if num1 < num2
smaller = num1
else
smaller = num2
endif
The variable "smaller" is a local variable. Variables used inside a function
are local unless prefixed by something like "g:", "w:", or "s:".
Note:
To access a global variable from inside a function you must prepend
"g:" to it. Thus "g:today" inside a function is used for the global
variable "today", and "today" is another variable, local to the
function or the script.
You now use the `return` statement to return the smallest number to the user.
Finally, you end the function: >
return smaller
enddef
The complete function definition is as follows: >
def Min(num1: number, num2: number): number
var smaller: number
if num1 < num2
smaller = num1
else
smaller = num2
endif
return smaller
enddef
Obviously this is a verbose example. You can make it shorter by using two
return commands: >
def Min(num1: number, num2: number): number
if num1 < num2
return num1
endif
return num2
enddef
And if you remember the conditional expression, you need only one line: >
def Min(num1: number, num2: number): number
return num1 < num2 ? num1 : num2
enddef
A user defined function is called in exactly the same way as a built-in
function. Only the name is different. The Min function can be used like
this: >
echo Min(5, 8)
Only now will the function be executed and the lines be parsed by Vim.
If there are mistakes, like using an undefined variable or function, you will
now get an error message. When defining the function these errors are not
detected. To get the errors sooner you can tell Vim to compile all the
functions in the script: >
defcompile
For a function that does not return anything leave out the return type: >
def SayIt(text: string)
echo text
enddef
It is also possible to define a legacy function with `function` and
`endfunction`. These do not have types and are not compiled. They execute
much slower.
USING A RANGE
A line range can be used with a function call. The function will be called
once for every line in the range, with the cursor in that line. Example: >
def Number()
echo "line " .. line(".") .. " contains: " .. getline(".")
enddef
If you call this function with: >
:10,15call Number()
The function will be called six times, starting on line 10 and ending on line
15.
VARIABLE NUMBER OF ARGUMENTS
Vim enables you to define functions that have a variable number of arguments.
The following command, for instance, defines a function that must have 1
argument (start) and can have up to 20 additional arguments: >
def Show(start: string, ...items: list<string>)
The variable "items" will be a list containing the extra arguments. You can
use it like any list, for example: >
def Show(start: string, ...items: list<string>)
echohl Title
echo "start is " .. start
echohl None
for index in range(len(items))
echon " Arg " .. index .. " is " .. items[index]
endfor
echo
enddef
You can call it like this: >
Show('Title', 'one', 'two', 'three')
< start is Title Arg 0 is one Arg 1 is two Arg 2 is three ~
This uses the `echohl` command to specify the highlighting used for the
following `echo` command. `echohl None` stops it again. The `echon` command
works like `echo`, but doesn't output a line break.
If you call it with one argument the "items" list will be empty.
`range(len(items))` returns a list with the indexes, what `for` loops over,
we'll explain that further down.
LISTING FUNCTIONS
The `function` command lists the names and arguments of all user-defined
functions: >
:function
< def <SNR>86_Show(start: string, ...items: list<string>) ~
function GetVimIndent() ~
function SetSyn(name) ~
The "<SNR>" prefix means that a function is script-local. |Vim9| functions
wil start with "def" and include argument and return types. Legacy functions
are listed with "function".
To see what a function does, use its name as an argument for `function`: >
:function SetSyn
< 1 if &syntax == '' ~
2 let &syntax = a:name ~
3 endif ~
endfunction ~
To see the "Show" function you need to include the script prefix, since a
"Show" function can be defined multiple times in different scripts. To find
the exact name you can use `function`, but the result may be a very long list.
To only get the functions matching a pattern you can use the `filter` prefix:
>
:filter Show function
< def <SNR>86_Show(start: string, ...items: list<string>) ~
>
:function <SNR>86_Show
< 1 echohl Title ~
2 echo "start is " .. start ~
etc.
DEBUGGING
The line number is useful for when you get an error message or when debugging.
See |debug-scripts| about debugging mode.
You can also set the 'verbose' option to 12 or higher to see all function
calls. Set it to 15 or higher to see every executed line.
DELETING A FUNCTION
To delete the SetSyn() function: >
:delfunction SetSyn
Deleting only works for global functions and functions in legacy script, not
for functions defined in a |Vim9| script.
You get an error when the function doesn't exist or cannot be deleted.
FUNCTION REFERENCES
Sometimes it can be useful to have a variable point to one function or
another. You can do it with function reference variable. Often shortened to
"funcref". Example: >
def Right()
return 'Right!'
enddef
def Wrong()
return 'Wrong!'
enddef
var Afunc = g:result == 1 ? Right : Wrong
Afunc()
< Wrong! ~
This assumes "g:result" is not one.
Note that the name of a variable that holds a function reference must start
with a capital. Otherwise it could be confused with the name of a builtin
function.
More information about defining your own functions here: |user-functions|.
==============================================================================
*41.8* Lists and Dictionaries
So far we have used the basic types String and Number. Vim also supports two
composite types: List and Dictionary.
A List is an ordered sequence of items. The items can be any kind of value,
thus you can make a List of numbers, a List of Lists and even a List of mixed
items. To create a List with three strings: >
var alist = ['aap', 'mies', 'noot']
The List items are enclosed in square brackets and separated by commas. To
create an empty List: >
var alist = []
You can add items to a List with the add() function: >
var alist = []
add(alist, 'foo')
add(alist, 'bar')
echo alist
< ['foo', 'bar'] ~
List concatenation is done with +: >
var alist = ['foo', 'bar']
alist = alist + ['and', 'more']
echo alist
< ['foo', 'bar', 'and', 'more'] ~
Or, if you want to extend a List with a function: >
var alist = ['one']
extend(alist, ['two', 'three'])
echo alist
< ['one', 'two', 'three'] ~
Notice that using `add()` will have a different effect: >
var alist = ['one']
add(alist, ['two', 'three'])
echo alist
< ['one', ['two', 'three']] ~
The second argument of add() is added as an item, now you have a nested list.
FOR LOOP
One of the nice things you can do with a List is iterate over it: >
var alist = ['one', 'two', 'three']
for n in alist
echo n
endfor
< one ~
two ~
three ~
This will loop over each element in List "alist", assigning each value to
variable "n". The generic form of a for loop is: >
for {varname} in {listexpression}
{commands}
endfor
To loop a certain number of times you need a List of a specific length. The
range() function creates one for you: >
for a in range(3)
echo a
endfor
< 0 ~
1 ~
2 ~
Notice that the first item of the List that range() produces is zero, thus the
last item is one less than the length of the list.
You can also specify the maximum value, the stride and even go backwards: >
for a in range(8, 4, -2)
echo a
endfor
< 8 ~
6 ~
4 ~
A more useful example, looping over lines in the buffer: >
for line in getline(1, 20)
if line =~ "Date: "
echo line
endif
endfor
This looks into lines 1 to 20 (inclusive) and echoes any date found in there.
DICTIONARIES
A Dictionary stores key-value pairs. You can quickly lookup a value if you
know the key. A Dictionary is created with curly braces: >
var uk2nl = {one: 'een', two: 'twee', three: 'drie'}
Now you can lookup words by putting the key in square brackets: >
echo uk2nl['two']
< twee ~
If the key does not have special characters, you can use the dot notation: >
echo uk2nl.two
< twee ~
The generic form for defining a Dictionary is: >
{<key> : <value>, ...}
An empty Dictionary is one without any keys: >
{}
The possibilities with Dictionaries are numerous. There are various functions
for them as well. For example, you can obtain a list of the keys and loop
over them: >
for key in keys(uk2nl)
echo key
endfor
< three ~
one ~
two ~
You will notice the keys are not ordered. You can sort the list to get a
specific order: >
for key in sort(keys(uk2nl))
echo key
endfor
< one ~
three ~
two ~
But you can never get back the order in which items are defined. For that you
need to use a List, it stores items in an ordered sequence.
For further reading see |Lists| and |Dictionaries|.
==============================================================================
*41.9* Exceptions
Let's start with an example: >
try
read ~/templates/pascal.tmpl
catch /E484:/
echo "Sorry, the Pascal template file cannot be found."
endtry
The `read` command will fail if the file does not exist. Instead of
generating an error message, this code catches the error and gives the user a
nice message.
For the commands in between `try` and `endtry` errors are turned into
exceptions. An exception is a string. In the case of an error the string
contains the error message. And every error message has a number. In this
case, the error we catch contains "E484:". This number is guaranteed to stay
the same (the text may change, e.g., it may be translated).
Besides being able to give a nice error message, Vim will also continue
executing commands. Otherwise, once an uncaught error is encountered,
execution will be aborted.
When the `read` command causes another error, the pattern "E484:" will not
match in it. Thus this exception will not be caught and result in the usual
error message.
You might be tempted to do this: >
try
read ~/templates/pascal.tmpl
catch
echo "Sorry, the Pascal template file cannot be found."
endtry
This means all errors are caught. But then you will not see an error that
would indicate a completely different problem, such as "E21: Cannot make
changes, 'modifiable' is off".
Another useful mechanism is the `finally` command: >
var tmp = tempname()
try
exe ":.,$write " .. tmp
exe "!filter " .. tmp
:.,$delete
exe ":$read " .. tmp
finally
call delete(tmp)
endtry
This filters the lines from the cursor until the end of the file through the
"filter" command, which takes a file name argument. No matter if the
filtering works, something goes wrong in between `try` and `finally` or the
user cancels the filtering by pressing CTRL-C, the `call delete(tmp)` is
always executed. This makes sure you don't leave the temporary file behind.
More information about exception handling can be found in the reference
manual: |exception-handling|.
==============================================================================
*41.10* Various remarks
Here is a summary of items that are useful to know when writing Vim scripts.
The end-of-line character depends on the system. For Vim scripts it is
recommended to always use the Unix fileformat, this also works on any other
system. That way you can copy your Vim scripts from MS-Windows to Unix and
they still work. See |:source_crnl|. To be sure it is set right, do this
before writing the file: >
:setlocal fileformat=unix
WHITE SPACE
Blank lines are allowed and ignored.
Leading whitespace characters (blanks and TABs) are always ignored.
Trailing whitespace is often ignored, but not always. One command that
includes it is `map`.
To include a whitespace character in the value of an option, it must be
escaped by a "\" (backslash) as in the following example: >
:set tags=my\ nice\ file
The same example written as: >
:set tags=my nice file
will issue an error, because it is interpreted as: >
:set tags=my
:set nice
:set file
|Vim9| script is very picky when it comes to white space. This was done
intentionally to make sure scripts are easy to read and to avoid mistakes.
COMMENTS
In |Vim9| script the character # starts a comment. Everything after
and including this character until the end-of-line is considered a comment and
is ignored, except for commands that don't consider comments, as shown in
examples below. A comment can start on any character position on the line,
but not when it is part of the command, e.g. in a string.
The character " (the double quote mark) starts a comment in legacy script.
There is a little "catch" with comments for some commands. Examples: >
abbrev dev development # shorthand
map <F3> o#include # insert include
execute cmd # do it
!ls *.c # list C files
The abbreviation 'dev' will be expanded to 'development # shorthand'. The
mapping of <F3> will actually be the whole line after the 'o# ....' including
the '# insert include'. The `execute` command will give an error. The `!`
command will send everything after it to the shell, most likely causing an
error.
There can be no comment after `map`, `abbreviate`, `execute` and `!` commands
(there are a few more commands with this restriction). For the `map`,
`abbreviate` and `execute` commands there is a trick: >
abbrev dev development|# shorthand
map <F3> o#include|# insert include
execute '!ls *.c' |# do it
With the '|' character the command is separated from the next one. And that
next command is only a comment. The last command, using `execute` is a
general solution, it works for all commands that do not accept a comment or a
'|' to separate the next command.
Notice that there is no white space before the '|' in the abbreviation and
mapping. For these commands, any character until the end-of-line or '|' is
included. As a consequence of this behavior, you don't always see that
trailing whitespace is included: >
map <F4> o#include
To spot these problems, you can highlight trailing spaces: >
match Search /\s\+$/
For Unix there is one special way to comment a line, that allows making a Vim
script executable, and it also works in legacy script: >
#!/usr/bin/env vim -S
echo "this is a Vim script"
quit
PITFALLS
An even bigger problem arises in the following example: >
map ,ab o#include
unmap ,ab
Here the unmap command will not work, because it tries to unmap ",ab ". This
does not exist as a mapped sequence. An error will be issued, which is very
hard to identify, because the ending whitespace character in `unmap ,ab ` is
not visible.
And this is the same as what happens when one uses a comment after an 'unmap'
command: >
unmap ,ab # comment
Here the comment part will be ignored. However, Vim will try to unmap
',ab ', which does not exist. Rewrite it as: >
unmap ,ab| # comment
RESTORING THE VIEW
Sometimes you want to make a change and go back to where the cursor was.
Restoring the relative position would also be nice, so that the same line
appears at the top of the window.
This example yanks the current line, puts it above the first line in the file
and then restores the view: >
map ,p ma"aYHmbgg"aP`bzt`a
What this does: >
ma"aYHmbgg"aP`bzt`a
< ma set mark a at cursor position
"aY yank current line into register a
Hmb go to top line in window and set mark b there
gg go to first line in file
"aP put the yanked line above it
`b go back to top line in display
zt position the text in the window as before
`a go back to saved cursor position
PACKAGING
Sometimes you will want to use global variables or functions, so that they can
be used anywhere. A good example is a global variable that passes a
preference to a plugin. To avoid other scripts using the same name, use a
prefix that is very unlikely to be used elsewhere. For example, if you have a
"mytags" plugin, you could use: >
g:mytags_location = '$HOME/project'
g:mytags_style = 'fast'
To minimize interference between plugins keep as much as possible local to the
script. |Vim9| script helps you with that, by default functions and variables
are script-local.
If you split your plugin into parts, you can use `import` and `export` to
share items between those parts. See `:export` for the details.
==============================================================================
*41.11* Writing a plugin *write-plugin*
You can write a Vim script in such a way that many people can use it. This is
called a plugin. Vim users can drop your script in their plugin directory and
use its features right away |add-plugin|.
There are actually two types of plugins:
global plugins: For all types of files.
filetype plugins: Only for files of a specific type.
In this section the first type is explained. Most items are also relevant for
writing filetype plugins. The specifics for filetype plugins are in the next
section |write-filetype-plugin|.
NAME
First of all you must choose a name for your plugin. The features provided
by the plugin should be clear from its name. And it should be unlikely that
someone else writes a plugin with the same name but which does something
different.
A script that corrects typing mistakes could be called "typecorrect.vim". We
will use it here as an example.
For the plugin to work for everybody, it should follow a few guidelines. This
will be explained step-by-step. The complete example plugin is at the end.
BODY
Let's start with the body of the plugin, the lines that do the actual work: >
14 iabbrev teh the
15 iabbrev otehr other
16 iabbrev wnat want
17 iabbrev synchronisation
18 \ synchronization
The actual list should be much longer, of course.
The line numbers have only been added to explain a few things, don't put them
in your plugin file!
FIRST LINE
>
1 vim9script noclear
You need to use `vimscript` as the very first command. Best is to put it in
the very first line.
The script we are writing will have a `finish` command to bail out when it is
loaded a second time. To avoid the items defined in the script are lost the
"noclear" argument is used. More info about this at |vim9-reload|.
HEADER
You will probably add new corrections to the plugin and soon have several
versions lying around. And when distributing this file, people will want to
know who wrote this wonderful plugin and where they can send remarks.
Therefore, put a header at the top of your plugin: >
2 # Vim global plugin for correcting typing mistakes
3 # Last Change: 2021 Dec 30
4 # Maintainer: Bram Moolenaar <Bram@vim.org>
About copyright and licensing: Since plugins are very useful and it's hardly
worth restricting their distribution, please consider making your plugin
either public domain or use the Vim |license|. A short note about this near
the top of the plugin should be sufficient. Example: >
5 # License: This file is placed in the public domain.
LINE CONTINUATION AND AVOIDING SIDE EFFECTS *use-cpo-save*
In line 18 above, the line-continuation mechanism is used |line-continuation|.
Users with 'compatible' set will run into trouble here, they will get an error
message. We can't just reset 'compatible', because that has a lot of side
effects. Instead, we will set the 'cpoptions' option to its Vim default
value and restore it later. That will allow the use of line-continuation and
make the script work for most people. It is done like this: >
11 var save_cpo = &cpo
12 set cpo&vim
..
42 &cpo = save_cpo
We first store the old value of 'cpoptions' in the "save_cpo" variable. At
the end of the plugin this value is restored.
Notice that "save_cpo" is a script-local variable. A global variable could
already be in use for something else. Always use script-local variables for
things that are only used in the script.
NOT LOADING
It is possible that a user doesn't always want to load this plugin. Or the
system administrator has dropped it in the system-wide plugin directory, but a
user has his own plugin he wants to use. Then the user must have a chance to
disable loading this specific plugin. These lines will make it possible: >
7 if exists("g:loaded_typecorrect")
8 finish
9 endif
10 g:loaded_typecorrect = 1
This also avoids that when the script is loaded twice it would pointlessly
redefine functions and cause trouble for autocommands that are added twice.
The name is recommended to start with "g:loaded_" and then the file name of
the plugin, literally. The "g:" is prepended to make the variable global, so
that other places can check whether its functionality is available. Without
"g:" it would be local to the script.
Using `finish` stops Vim from reading the rest of the file, it's much quicker
than using if-endif around the whole file, since Vim would still need to parse
the commands to find the `endif`.
MAPPING
Now let's make the plugin more interesting: We will add a mapping that adds a
correction for the word under the cursor. We could just pick a key sequence
for this mapping, but the user might already use it for something else. To
allow the user to define which keys a mapping in a plugin uses, the <Leader>
item can be used: >
22 map <unique> <Leader>a <Plug>TypecorrAdd;
The "<Plug>TypecorrAdd;" thing will do the work, more about that further on.
The user can set the "g:mapleader" variable to the key sequence that he wants
plugin mappings to start with. Thus if the user has done: >
g:mapleader = "_"
the mapping will define "_a". If the user didn't do this, the default value
will be used, which is a backslash. Then a map for "\a" will be defined.
Note that <unique> is used, this will cause an error message if the mapping
already happened to exist. |:map-<unique>|
But what if the user wants to define his own key sequence? We can allow that
with this mechanism: >
21 if !hasmapto('<Plug>TypecorrAdd;')
22 map <unique> <Leader>a <Plug>TypecorrAdd;
23 endif
This checks if a mapping to "<Plug>TypecorrAdd;" already exists, and only
defines the mapping from "<Leader>a" if it doesn't. The user then has a
chance of putting this in his vimrc file: >
map ,c <Plug>TypecorrAdd;
Then the mapped key sequence will be ",c" instead of "_a" or "\a".
PIECES
If a script gets longer, you often want to break up the work in pieces. You
can use functions or mappings for this. But you don't want these functions
and mappings to interfere with the ones from other scripts. For example, you
could define a function Add(), but another script could try to define the same
function. To avoid this, we define the function local to the script.
Fortunately, in |Vim9| script this is the default. In a legacy script you
would need to prefix the name with "s:".
We will define a function that adds a new typing correction: >
30 def Add(from: string, correct: bool)
31 var to = input("type the correction for " .. from .. ": ")
32 exe ":iabbrev " .. from .. " " .. to
..
36 enddef
Now we can call the function Add() from within this script. If another
script also defines Add(), it will be local to that script and can only
be called from that script. There can also be a global g:Add() function,
which is again another function.
<SID> can be used with mappings. It generates a script ID, which identifies
the current script. In our typing correction plugin we use it like this: >
24 noremap <unique> <script> <Plug>TypecorrAdd; <SID>Add
..
28 noremap <SID>Add :call <SID>Add(expand("<cword>"), true)<CR>
Thus when a user types "\a", this sequence is invoked: >
\a -> <Plug>TypecorrAdd; -> <SID>Add -> :call <SID>Add(...)
If another script also maps <SID>Add, it will get another script ID and
thus define another mapping.
Note that instead of Add() we use <SID>Add() here. That is because the
mapping is typed by the user, thus outside of the script context. The <SID>
is translated to the script ID, so that Vim knows in which script to look for
the Add() function.
This is a bit complicated, but it's required for the plugin to work together
with other plugins. The basic rule is that you use <SID>Add() in mappings and
Add() in other places (the script itself, autocommands, user commands).
We can also add a menu entry to do the same as the mapping: >
26 noremenu <script> Plugin.Add\ Correction <SID>Add
The "Plugin" menu is recommended for adding menu items for plugins. In this
case only one item is used. When adding more items, creating a submenu is
recommended. For example, "Plugin.CVS" could be used for a plugin that offers
CVS operations "Plugin.CVS.checkin", "Plugin.CVS.checkout", etc.
Note that in line 28 ":noremap" is used to avoid that any other mappings cause
trouble. Someone may have remapped ":call", for example. In line 24 we also
use ":noremap", but we do want "<SID>Add" to be remapped. This is why
"<script>" is used here. This only allows mappings which are local to the
script. |:map-<script>| The same is done in line 26 for ":noremenu".
|:menu-<script>|
<SID> AND <Plug> *using-<Plug>*
Both <SID> and <Plug> are used to avoid that mappings of typed keys interfere
with mappings that are only to be used from other mappings. Note the
difference between using <SID> and <Plug>:
<Plug> is visible outside of the script. It is used for mappings which the
user might want to map a key sequence to. <Plug> is a special code
that a typed key will never produce.
To make it very unlikely that other plugins use the same sequence of
characters, use this structure: <Plug> scriptname mapname
In our example the scriptname is "Typecorr" and the mapname is "Add".
We add a semicolon as the terminator. This results in
"<Plug>TypecorrAdd;". Only the first character of scriptname and
mapname is uppercase, so that we can see where mapname starts.
<SID> is the script ID, a unique identifier for a script.
Internally Vim translates <SID> to "<SNR>123_", where "123" can be any
number. Thus a function "<SID>Add()" will have a name "<SNR>11_Add()"
in one script, and "<SNR>22_Add()" in another. You can see this if
you use the ":function" command to get a list of functions. The
translation of <SID> in mappings is exactly the same, that's how you
can call a script-local function from a mapping.
USER COMMAND
Now let's add a user command to add a correction: >
38 if !exists(":Correct")
39 command -nargs=1 Correct :call Add(<q-args>, false)
40 endif
The user command is defined only if no command with the same name already
exists. Otherwise we would get an error here. Overriding the existing user
command with ":command!" is not a good idea, this would probably make the user
wonder why the command he defined himself doesn't work. |:command|
If it did happen you can find out who to blame with: >
verbose command Correct
SCRIPT VARIABLES
When a variable starts with "s:" it is a script variable. It can only be used
inside a script. Outside the script it's not visible. This avoids trouble
with using the same variable name in different scripts. The variables will be
kept as long as Vim is running. And the same variables are used when sourcing
the same script again. |s:var|
The nice thing about |Vim9| script is that variables are local to the script
by default. You can prepend "s:" if you like, but you do not need to. And
functions in the script can also use the script variables without a prefix.
Script-local variables can also be used in functions, autocommands and user
commands that are defined in the script. Thus they are the perfect way to
share information between parts of your plugin, without it leaking out. In
our example we can add a few lines to count the number of corrections: >
19 var count = 4
..
30 def Add(from: string, correct: bool)
..
34 count += 1
35 echo "you now have " .. count .. " corrections"
36 enddef
"count" is declared and initialized to 4 in the script itself. When later
the Add() function is called, it increments "count". It doesn't matter from
where the function was called, since it has been defined in the script, it
will use the local variables from this script.
THE RESULT
Here is the resulting complete example: >
1 vim9script noclear
2 # Vim global plugin for correcting typing mistakes
3 # Last Change: 2021 Dec 30
4 # Maintainer: Bram Moolenaar <Bram@vim.org>
5 # License: This file is placed in the public domain.
6
7 if exists("g:loaded_typecorrect")
8 finish
9 endif
10 g:loaded_typecorrect = 1
11 var save_cpo = &cpo
12 set cpo&vim
13
14 iabbrev teh the
15 iabbrev otehr other
16 iabbrev wnat want
17 iabbrev synchronisation
18 \ synchronization
19 var count = 4
20
21 if !hasmapto('<Plug>TypecorrAdd;')
22 map <unique> <Leader>a <Plug>TypecorrAdd;
23 endif
24 noremap <unique> <script> <Plug>TypecorrAdd; <SID>Add
25
26 noremenu <script> Plugin.Add\ Correction <SID>Add
27
28 noremap <SID>Add :call <SID>Add(expand("<cword>"), true)<CR>
29
30 def Add(from: string, correct: bool)
31 var to = input("type the correction for " .. from .. ": ")
32 exe ":iabbrev " .. from .. " " .. to
33 if correct | exe "normal viws\<C-R>\" \b\e" | endif
34 count += 1
35 echo "you now have " .. count .. " corrections"
36 enddef
37
38 if !exists(":Correct")
39 command -nargs=1 Correct call Add(<q-args>, false)
40 endif
41
42 &cpo = save_cpo
Line 33 wasn't explained yet. It applies the new correction to the word under
the cursor. The |:normal| command is used to use the new abbreviation. Note
that mappings and abbreviations are expanded here, even though the function
was called from a mapping defined with ":noremap".
DOCUMENTATION *write-local-help*
It's a good idea to also write some documentation for your plugin. Especially
when its behavior can be changed by the user. See |add-local-help| for how
they are installed.
Here is a simple example for a plugin help file, called "typecorrect.txt": >
1 *typecorrect.txt* Plugin for correcting typing mistakes
2
3 If you make typing mistakes, this plugin will have them corrected
4 automatically.
5
6 There are currently only a few corrections. Add your own if you like.
7
8 Mappings:
9 <Leader>a or <Plug>TypecorrAdd;
10 Add a correction for the word under the cursor.
11
12 Commands:
13 :Correct {word}
14 Add a correction for {word}.
15
16 *typecorrect-settings*
17 This plugin doesn't have any settings.
The first line is actually the only one for which the format matters. It will
be extracted from the help file to be put in the "LOCAL ADDITIONS:" section of
help.txt |local-additions|. The first "*" must be in the first column of the
first line. After adding your help file do ":help" and check that the entries
line up nicely.
You can add more tags inside ** in your help file. But be careful not to use
existing help tags. You would probably use the name of your plugin in most of
them, like "typecorrect-settings" in the example.
Using references to other parts of the help in || is recommended. This makes
it easy for the user to find associated help.
FILETYPE DETECTION *plugin-filetype*
If your filetype is not already detected by Vim, you should create a filetype
detection snippet in a separate file. It is usually in the form of an
autocommand that sets the filetype when the file name matches a pattern.
Example: >
au BufNewFile,BufRead *.foo setlocal filetype=foofoo
Write this single-line file as "ftdetect/foofoo.vim" in the first directory
that appears in 'runtimepath'. For Unix that would be
"~/.vim/ftdetect/foofoo.vim". The convention is to use the name of the
filetype for the script name.
You can make more complicated checks if you like, for example to inspect the
contents of the file to recognize the language. Also see |new-filetype|.
SUMMARY *plugin-special*
Summary of special things to use in a plugin:
var name Variable local to the script.
<SID> Script-ID, used for mappings and functions local to
the script.
hasmapto() Function to test if the user already defined a mapping
for functionality the script offers.
<Leader> Value of "mapleader", which the user defines as the
keys that plugin mappings start with.
map <unique> Give a warning if a mapping already exists.
noremap <script> Use only mappings local to the script, not global
mappings.
exists(":Cmd") Check if a user command already exists.
==============================================================================
*41.12* Writing a filetype plugin *write-filetype-plugin* *ftplugin*
A filetype plugin is like a global plugin, except that it sets options and
defines mappings for the current buffer only. See |add-filetype-plugin| for
how this type of plugin is used.
First read the section on global plugins above |41.11|. All that is said there
also applies to filetype plugins. There are a few extras, which are explained
here. The essential thing is that a filetype plugin should only have an
effect on the current buffer.
DISABLING
If you are writing a filetype plugin to be used by many people, they need a
chance to disable loading it. Put this at the top of the plugin: >
# Only do this when not done yet for this buffer
if exists("b:did_ftplugin")
finish
endif
b:did_ftplugin = 1
This also needs to be used to avoid that the same plugin is executed twice for
the same buffer (happens when using an ":edit" command without arguments).
Now users can disable loading the default plugin completely by making a
filetype plugin with only these lines: >
vim9script
b:did_ftplugin = 1
This does require that the filetype plugin directory comes before $VIMRUNTIME
in 'runtimepath'!
If you do want to use the default plugin, but overrule one of the settings,
you can write the different setting in a script: >
setlocal textwidth=70
Now write this in the "after" directory, so that it gets sourced after the
distributed "vim.vim" ftplugin |after-directory|. For Unix this would be
"~/.vim/after/ftplugin/vim.vim". Note that the default plugin will have set
"b:did_ftplugin", but it is ignored here.
OPTIONS
To make sure the filetype plugin only affects the current buffer use the >
setlocal
command to set options. And only set options which are local to a buffer (see
the help for the option to check that). When using `:setlocal` for global
options or options local to a window, the value will change for many buffers,
and that is not what a filetype plugin should do.
When an option has a value that is a list of flags or items, consider using
"+=" and "-=" to keep the existing value. Be aware that the user may have
changed an option value already. First resetting to the default value and
then changing it is often a good idea. Example: >
setlocal formatoptions& formatoptions+=ro
MAPPINGS
To make sure mappings will only work in the current buffer use the >
map <buffer>
command. This needs to be combined with the two-step mapping explained above.
An example of how to define functionality in a filetype plugin: >
if !hasmapto('<Plug>JavaImport;')
map <buffer> <unique> <LocalLeader>i <Plug>JavaImport;
endif
noremap <buffer> <unique> <Plug>JavaImport; oimport ""<Left><Esc>
|hasmapto()| is used to check if the user has already defined a map to
<Plug>JavaImport;. If not, then the filetype plugin defines the default
mapping. This starts with |<LocalLeader>|, which allows the user to select
the key(s) he wants filetype plugin mappings to start with. The default is a
backslash.
"<unique>" is used to give an error message if the mapping already exists or
overlaps with an existing mapping.
|:noremap| is used to avoid that any other mappings that the user has defined
interferes. You might want to use ":noremap <script>" to allow remapping
mappings defined in this script that start with <SID>.
The user must have a chance to disable the mappings in a filetype plugin,
without disabling everything. Here is an example of how this is done for a
plugin for the mail filetype: >
# Add mappings, unless the user didn't want this.
if !exists("g:no_plugin_maps") && !exists("g:no_mail_maps")
# Quote text by inserting "> "
if !hasmapto('<Plug>MailQuote;')
vmap <buffer> <LocalLeader>q <Plug>MailQuote;
nmap <buffer> <LocalLeader>q <Plug>MailQuote;
endif
vnoremap <buffer> <Plug>MailQuote; :s/^/> /<CR>
nnoremap <buffer> <Plug>MailQuote; :.,$s/^/> /<CR>
endif
Two global variables are used:
|g:no_plugin_maps| disables mappings for all filetype plugins
|g:no_mail_maps| disables mappings for the "mail" filetype
USER COMMANDS
To add a user command for a specific file type, so that it can only be used in
one buffer, use the "-buffer" argument to |:command|. Example: >
command -buffer Make make %:r.s
VARIABLES
A filetype plugin will be sourced for each buffer of the type it's for. Local
script variables will be shared between all invocations. Use local buffer
variables |b:var| if you want a variable specifically for one buffer.
FUNCTIONS
When defining a function, this only needs to be done once. But the filetype
plugin will be sourced every time a file with this filetype will be opened.
This construct makes sure the function is only defined once: >
if !exists("*Func")
def Func(arg)
...
enddef
endif
<
UNDO *undo_indent* *undo_ftplugin*
When the user does ":setfiletype xyz" the effect of the previous filetype
should be undone. Set the b:undo_ftplugin variable to the commands that will
undo the settings in your filetype plugin. Example: >
let b:undo_ftplugin = "setlocal fo< com< tw< commentstring<"
\ .. "| unlet b:match_ignorecase b:match_words b:match_skip"
Using ":setlocal" with "<" after the option name resets the option to its
global value. That is mostly the best way to reset the option value.
This does require removing the "C" flag from 'cpoptions' to allow line
continuation, as mentioned above |use-cpo-save|.
For undoing the effect of an indent script, the b:undo_indent variable should
be set accordingly.
Both these variables use legacy script syntax, not |Vim9| syntax.
FILE NAME
The filetype must be included in the file name |ftplugin-name|. Use one of
these three forms:
.../ftplugin/stuff.vim
.../ftplugin/stuff_foo.vim
.../ftplugin/stuff/bar.vim
"stuff" is the filetype, "foo" and "bar" are arbitrary names.
SUMMARY *ftplugin-special*
Summary of special things to use in a filetype plugin:
<LocalLeader> Value of "maplocalleader", which the user defines as
the keys that filetype plugin mappings start with.
map <buffer> Define a mapping local to the buffer.
noremap <script> Only remap mappings defined in this script that start
with <SID>.
setlocal Set an option for the current buffer only.
command -buffer Define a user command local to the buffer.
exists("*s:Func") Check if a function was already defined.
Also see |plugin-special|, the special things used for all plugins.
==============================================================================
*41.13* Writing a compiler plugin *write-compiler-plugin*
A compiler plugin sets options for use with a specific compiler. The user can
load it with the |:compiler| command. The main use is to set the
'errorformat' and 'makeprg' options.
Easiest is to have a look at examples. This command will edit all the default
compiler plugins: >
next $VIMRUNTIME/compiler/*.vim
Type `:next` to go to the next plugin file.
There are two special items about these files. First is a mechanism to allow
a user to overrule or add to the default file. The default files start with: >
if exists("g:current_compiler")
finish
endif
g:current_compiler = "mine"
When you write a compiler file and put it in your personal runtime directory
(e.g., ~/.vim/compiler for Unix), you set the "current_compiler" variable to
make the default file skip the settings.
*:CompilerSet*
The second mechanism is to use ":set" for ":compiler!" and ":setlocal" for
":compiler". Vim defines the ":CompilerSet" user command for this. However,
older Vim versions don't, thus your plugin should define it then. This is an
example: >
if exists(":CompilerSet") != 2
command -nargs=* CompilerSet setlocal <args>
endif
CompilerSet errorformat& " use the default 'errorformat'
CompilerSet makeprg=nmake
When you write a compiler plugin for the Vim distribution or for a system-wide
runtime directory, use the mechanism mentioned above. When
"current_compiler" was already set by a user plugin nothing will be done.
When you write a compiler plugin to overrule settings from a default plugin,
don't check "current_compiler". This plugin is supposed to be loaded
last, thus it should be in a directory at the end of 'runtimepath'. For Unix
that could be ~/.vim/after/compiler.
==============================================================================
*41.14* Writing a plugin that loads quickly *write-plugin-quickload*
A plugin may grow and become quite long. The startup delay may become
noticeable, while you hardly ever use the plugin. Then it's time for a
quickload plugin.
The basic idea is that the plugin is loaded twice. The first time user
commands and mappings are defined that offer the functionality. The second
time the functions that implement the functionality are defined.
It may sound surprising that quickload means loading a script twice. What we
mean is that it loads quickly the first time, postponing the bulk of the
script to the second time, which only happens when you actually use it. When
you always use the functionality it actually gets slower!
This uses a FuncUndefined autocommand. Since Vim 7 there is an alternative:
use the |autoload| functionality |41.15|. That will also use |Vim9| script
instead of legacy script that is used here.
The following example shows how it's done: >
" Vim global plugin for demonstrating quick loading
" Last Change: 2005 Feb 25
" Maintainer: Bram Moolenaar <Bram@vim.org>
" License: This file is placed in the public domain.
if !exists("s:did_load")
command -nargs=* BNRead call BufNetRead(<f-args>)
map <F19> :call BufNetWrite('something')<CR>
let s:did_load = 1
exe 'au FuncUndefined BufNet* source ' .. expand('<sfile>')
finish
endif
function BufNetRead(...)
echo 'BufNetRead(' .. string(a:000) .. ')'
" read functionality here
endfunction
function BufNetWrite(...)
echo 'BufNetWrite(' .. string(a:000) .. ')'
" write functionality here
endfunction
When the script is first loaded "s:did_load" is not set. The commands between
the "if" and "endif" will be executed. This ends in a |:finish| command, thus
the rest of the script is not executed.
The second time the script is loaded "s:did_load" exists and the commands
after the "endif" are executed. This defines the (possible long)
BufNetRead() and BufNetWrite() functions.
If you drop this script in your plugin directory Vim will execute it on
startup. This is the sequence of events that happens:
1. The "BNRead" command is defined and the <F19> key is mapped when the script
is sourced at startup. A |FuncUndefined| autocommand is defined. The
":finish" command causes the script to terminate early.
2. The user types the BNRead command or presses the <F19> key. The
BufNetRead() or BufNetWrite() function will be called.
3. Vim can't find the function and triggers the |FuncUndefined| autocommand
event. Since the pattern "BufNet*" matches the invoked function, the
command "source fname" will be executed. "fname" will be equal to the name
of the script, no matter where it is located, because it comes from
expanding "<sfile>" (see |expand()|).
4. The script is sourced again, the "s:did_load" variable exists and the
functions are defined.
Notice that the functions that are loaded afterwards match the pattern in the
|FuncUndefined| autocommand. You must make sure that no other plugin defines
functions that match this pattern.
==============================================================================
*41.15* Writing library scripts *write-library-script*
Some functionality will be required in several places. When this becomes more
than a few lines you will want to put it in one script and use it from many
scripts. We will call that one script a library script.
Manually loading a library script is possible, so long as you avoid loading it
when it's already done. You can do this with the |exists()| function.
Example: >
if !exists('*MyLibFunction')
runtime library/mylibscript.vim
endif
MyLibFunction(arg)
Here you need to know that MyLibFunction() is defined in a script
"library/mylibscript.vim" in one of the directories in 'runtimepath'.
To make this a bit simpler Vim offers the autoload mechanism. Then the
example looks like this: >
mylib#myfunction(arg)
That's a lot simpler, isn't it? Vim will recognize the function name by the
embedded "#" character and when it's not defined search for the script
"autoload/mylib.vim" in 'runtimepath'. That script must define the
"mylib#myfunction()" function.
You can put many other functions in the mylib.vim script, you are free to
organize your functions in library scripts. But you must use function names
where the part before the '#' matches the script name. Otherwise Vim would
not know what script to load.
If you get really enthusiastic and write lots of library scripts, you may
want to use subdirectories. Example: >
netlib#ftp#read('somefile')
For Unix the library script used for this could be:
~/.vim/autoload/netlib/ftp.vim
Where the function is defined like this: >
def netlib#ftp#read(fname: string)
# Read the file fname through ftp
enddef
Notice that the name the function is defined with is exactly the same as the
name used for calling the function. And the part before the last '#'
exactly matches the subdirectory and script name.
You can use the same mechanism for variables: >
var weekdays = dutch#weekdays
This will load the script "autoload/dutch.vim", which should contain something
like: >
var dutch#weekdays = ['zondag', 'maandag', 'dinsdag', 'woensdag',
\ 'donderdag', 'vrijdag', 'zaterdag']
Further reading: |autoload|.
==============================================================================
*41.16* Distributing Vim scripts *distribute-script*
Vim users will look for scripts on the Vim website: http://www.vim.org.
If you made something that is useful for others, share it!
Another place is github. But there you need to know where to find it! The
advantage is that most plugin managers fetch plugins from github. You'll have
to use your favorite search engine to find them.
Vim scripts can be used on any system. However, there might not be a tar or
gzip command. If you want to pack files together and/or compress them the
"zip" utility is recommended.
For utmost portability use Vim itself to pack scripts together. This can be
done with the Vimball utility. See |vimball|.
It's good if you add a line to allow automatic updating. See |glvs-plugins|.
==============================================================================
Next chapter: |usr_42.txt| Add new menus
Copyright: see |manual-copyright| vim:tw=78:ts=8:noet:ft=help:norl: