BoardConfig.mk

# Copyright (C) 2010 The Android Open Source Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

#
# This file is the build configuration for a full Android
# build for grouper hardware. This cleanly combines a set of
# device-specific aspects (drivers) with a device-agnostic
# product configuration (apps).
#
DEVICE_PATH := device/asus/zenfone6

BOARD_VENDOR := asus

# Architecture
TARGET_ARCH := arm64
TARGET_ARCH_VARIANT := armv8-a
TARGET_CPU_ABI := arm64-v8a
TARGET_CPU_ABI2 :=
TARGET_CPU_VARIANT := kryo300

TARGET_2ND_ARCH := arm
TARGET_2ND_ARCH_VARIANT := armv8-a
TARGET_2ND_CPU_ABI := armeabi-v7a
TARGET_2ND_CPU_ABI2 := armeabi
TARGET_2ND_CPU_VARIANT := cortex-a75

TARGET_USES_64_BIT_BINDER := true

ENABLE_CPUSETS := true
ENABLE_SCHEDBOOST := true

# Bootloader
TARGET_BOOTLOADER_BOARD_NAME := msmnile
TARGET_NO_BOOTLOADER := true

# A/B
AB_OTA_UPDATER := true
BOARD_AVB_MAKE_VBMETA_IMAGE_ARGS += --set_hashtree_disabled_flag
BOARD_AVB_MAKE_VBMETA_IMAGE_ARGS += --flags 2

# ANT+
BOARD_ANT_WIRELESS_DEVICE := "qualcomm-hidl"

# Api
PRODUCT_SHIPPING_API_LEVEL := 27

# Bluetooth
BOARD_HAVE_BLUETOOTH := true
BOARD_HAVE_BLUETOOTH_QCOM := true
BOARD_BLUETOOTH_BDROID_BUILDCFG_INCLUDE_DIR := $(DEVICE_PATH)/bluetooth
QCOM_BT_USE_BTNV := true

# Camera
BOARD_USES_SNAPDRAGONCAMERA_VERSION := 2

# charger
HEALTHD_USE_BATTERY_INFO := true
BOARD_CHARGER_ENABLE_SUSPEND := true
BOARD_CHARGER_DISABLE_INIT_BLANK := true

# Dex
ifeq ($(HOST_OS),linux)
  ifneq ($(TARGET_BUILD_VARIANT),eng)
    WITH_DEXPREOPT ?= true
  endif
endif
WITH_DEXPREOPT_BOOT_IMG_AND_SYSTEM_SERVER_ONLY ?= true

# Display
TARGET_USES_HWC2 := true

# DRM
TARGET_ENABLE_MEDIADRM_64 := true

# Global
BOARD_USES_QCOM_HARDWARE := true
TARGET_SPECIFIC_HEADER_PATH := $(DEVICE_PATH)/include
TARGET_SUPPORTS_32_BIT_APPS := true
TARGET_SUPPORTS_64_BIT_APPS := true
TARGET_USES_QCOM_BSP := false
TARGET_USERIMAGES_USE_EXT4 := true
TARGET_USERIMAGES_USE_F2FS := false
TARGET_USERIMAGES_SPARSE_EXT_DISABLED := false

# Kernel
BOARD_KERNEL_CMDLINE := console=ttyMSM0,115200n8 androidboot.hardware=qcom androidboot.console=ttyMSM0 androidboot.memcg=1 lpm_levels.sleep_disabled=1 video=vfb:640x400,bpp=32,memsize=3072000 msm_rtb.filter=0x237 service_locator.enable=1 swiotlb=2048 firmware_class.path=/vendor/firmware_mnt/image loop.max_part=7 androidboot.usbcontroller=a600000.dwc3
BOARD_KERNEL_CMDLINE += androidboot.selinux=permissive
BOARD_KERNEL_PAGESIZE := 4096
BOARD_KERNEL_BASE := 0x00000000
BOARD_KERNEL_TAGS_OFFSET := 0x00008000
BOARD_RAMDISK_OFFSET     := 0x01000000
BOARD_TAGS_OFFSET := 0x00000100
TARGET_KERNEL_ARCH := arm64
TARGET_KERNEL_HEADER_ARCH := arm64
TARGET_KERNEL_CROSS_COMPILE_PREFIX := aarch64-linux-android-
BOARD_KERNEL_IMAGE_NAME := Image.gz-dtb
TARGET_COMPILE_WITH_MSM_KERNEL := true
TARGET_KERNEL_SOURCE := kernel/asus/sm8150
TARGET_KERNEL_CONFIG := vendor/zs630kl_defconfig
BOARD_KERNEL_SEPARATED_DTBO := true
TARGET_KERNEL_CLANG_COMPILE := true
TARGET_KERNEL_CLANG_VERSION := 6.0.2

# Partitions
BOARD_BUILD_DISABLED_VBMETAIMAGE := true
BOARD_BUILD_SYSTEM_ROOT_IMAGE := true
BOARD_BOOTIMAGE_PARTITION_SIZE := 100663296
BOARD_DTBOIMG_PARTITION_SIZE := 8388608
BOARD_SYSTEMIMAGE_PARTITION_SIZE := 3758096384
BOARD_USERDATAIMAGE_PARTITION_SIZE := 118112366592
BOARD_FLASH_BLOCK_SIZE := 262144 # (BOARD_KERNEL_PAGESIZE * 64)
BOARD_USES_PRODUCTIMAGE := true
TARGET_COPY_OUT_ODM := odm
TARGET_COPY_OUT_VENDOR := vendor

BOARD_ROOT_EXTRA_FOLDERS := ADF APD asdf batinfo voucher xrom

# Platform
TARGET_BOARD_PLATFORM := msmnile
TARGET_BOARD_PLATFORM_GPU := qcom-adreno640

# Properties
BOARD_PROPERTY_OVERRIDES_SPLIT_ENABLED := true

# Recovery
BOARD_USES_RECOVERY_AS_BOOT := true
TARGET_NO_RECOVERY := true
TARGET_RECOVERY_FSTAB := $(DEVICE_PATH)/recovery.fstab
TARGET_RECOVERY_PIXEL_FORMAT := "BGRA_8888"
TARGET_USERIMAGES_USE_EXT4 := true
TARGET_USERIMAGES_USE_F2FS := true
TARGET_USES_MKE2FS := true

# Sepolicy
include vendor/omni/sepolicy/sepolicy.mk
BOARD_PLAT_PRIVATE_SEPOLICY_DIR += device/qcom/sepolicy/private
BOARD_PLAT_PUBLIC_SEPOLICY_DIR += device/qcom/sepolicy/public
BOARD_PLAT_PRIVATE_SEPOLICY_DIR += $(DEVICE_PATH)/sepolicy/private

# Treble
BOARD_VNDK_VERSION := current