| // Copyright (C) 2018 The Android Open Source Project |
| // |
| // Licensed under the Apache License, Version 2.0 (the "License"); |
| // you may not use this file except in compliance with the License. |
| // You may obtain a copy of the License at |
| // |
| // http://www.apache.org/licenses/LICENSE-2.0 |
| // |
| // Unless required by applicable law or agreed to in writing, software |
| // distributed under the License is distributed on an "AS IS" BASIS, |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| // See the License for the specific language governing permissions and |
| // limitations under the License. |
| |
| // package apex implements build rules for creating the APEX files which are container for |
| // lower-level system components. See https://source.android.com/devices/tech/ota/apex |
| package apex |
| |
| import ( |
| "fmt" |
| "path/filepath" |
| "regexp" |
| "sort" |
| "strings" |
| |
| "android/soong/bazel/cquery" |
| |
| "github.com/google/blueprint" |
| "github.com/google/blueprint/proptools" |
| |
| "android/soong/android" |
| "android/soong/bazel" |
| "android/soong/bpf" |
| "android/soong/cc" |
| prebuilt_etc "android/soong/etc" |
| "android/soong/filesystem" |
| "android/soong/java" |
| "android/soong/multitree" |
| "android/soong/rust" |
| "android/soong/sh" |
| ) |
| |
| func init() { |
| registerApexBuildComponents(android.InitRegistrationContext) |
| } |
| |
| func registerApexBuildComponents(ctx android.RegistrationContext) { |
| ctx.RegisterModuleType("apex", BundleFactory) |
| ctx.RegisterModuleType("apex_test", TestApexBundleFactory) |
| ctx.RegisterModuleType("apex_vndk", vndkApexBundleFactory) |
| ctx.RegisterModuleType("apex_defaults", DefaultsFactory) |
| ctx.RegisterModuleType("prebuilt_apex", PrebuiltFactory) |
| ctx.RegisterModuleType("override_apex", OverrideApexFactory) |
| ctx.RegisterModuleType("apex_set", apexSetFactory) |
| |
| ctx.PreArchMutators(registerPreArchMutators) |
| ctx.PreDepsMutators(RegisterPreDepsMutators) |
| ctx.PostDepsMutators(RegisterPostDepsMutators) |
| } |
| |
| func registerPreArchMutators(ctx android.RegisterMutatorsContext) { |
| ctx.TopDown("prebuilt_apex_module_creator", prebuiltApexModuleCreatorMutator).Parallel() |
| } |
| |
| func RegisterPreDepsMutators(ctx android.RegisterMutatorsContext) { |
| ctx.TopDown("apex_vndk", apexVndkMutator).Parallel() |
| ctx.BottomUp("apex_vndk_deps", apexVndkDepsMutator).Parallel() |
| } |
| |
| func RegisterPostDepsMutators(ctx android.RegisterMutatorsContext) { |
| ctx.TopDown("apex_info", apexInfoMutator).Parallel() |
| ctx.BottomUp("apex_unique", apexUniqueVariationsMutator).Parallel() |
| ctx.BottomUp("apex_test_for_deps", apexTestForDepsMutator).Parallel() |
| ctx.BottomUp("apex_test_for", apexTestForMutator).Parallel() |
| // Run mark_platform_availability before the apexMutator as the apexMutator needs to know whether |
| // it should create a platform variant. |
| ctx.BottomUp("mark_platform_availability", markPlatformAvailability).Parallel() |
| ctx.BottomUp("apex", apexMutator).Parallel() |
| ctx.BottomUp("apex_directly_in_any", apexDirectlyInAnyMutator).Parallel() |
| ctx.BottomUp("apex_dcla_deps", apexDCLADepsMutator).Parallel() |
| // Register after apex_info mutator so that it can use ApexVariationName |
| ctx.TopDown("apex_strict_updatability_lint", apexStrictUpdatibilityLintMutator).Parallel() |
| } |
| |
| type apexBundleProperties struct { |
| // Json manifest file describing meta info of this APEX bundle. Refer to |
| // system/apex/proto/apex_manifest.proto for the schema. Default: "apex_manifest.json" |
| Manifest *string `android:"path"` |
| |
| // AndroidManifest.xml file used for the zip container of this APEX bundle. If unspecified, |
| // a default one is automatically generated. |
| AndroidManifest *string `android:"path"` |
| |
| // Determines the file contexts file for setting the security contexts to files in this APEX |
| // bundle. For platform APEXes, this should points to a file under /system/sepolicy Default: |
| // /system/sepolicy/apex/<module_name>_file_contexts. |
| File_contexts *string `android:"path"` |
| |
| // By default, file_contexts is amended by force-labelling / and /apex_manifest.pb as system_file |
| // to avoid mistakes. When set as true, no force-labelling. |
| Use_file_contexts_as_is *bool |
| |
| // Path to the canned fs config file for customizing file's |
| // uid/gid/mod/capabilities. The content of this file is appended to the |
| // default config, so that the custom entries are preferred. The format is |
| // /<path_or_glob> <uid> <gid> <mode> [capabilities=0x<cap>], where |
| // path_or_glob is a path or glob pattern for a file or set of files, |
| // uid/gid are numerial values of user ID and group ID, mode is octal value |
| // for the file mode, and cap is hexadecimal value for the capability. |
| Canned_fs_config *string `android:"path"` |
| |
| ApexNativeDependencies |
| |
| Multilib apexMultilibProperties |
| |
| // List of runtime resource overlays (RROs) that are embedded inside this APEX. |
| Rros []string |
| |
| // List of bootclasspath fragments that are embedded inside this APEX bundle. |
| Bootclasspath_fragments []string |
| |
| // List of systemserverclasspath fragments that are embedded inside this APEX bundle. |
| Systemserverclasspath_fragments []string |
| |
| // List of java libraries that are embedded inside this APEX bundle. |
| Java_libs []string |
| |
| // List of sh binaries that are embedded inside this APEX bundle. |
| Sh_binaries []string |
| |
| // List of platform_compat_config files that are embedded inside this APEX bundle. |
| Compat_configs []string |
| |
| // List of filesystem images that are embedded inside this APEX bundle. |
| Filesystems []string |
| |
| // The minimum SDK version that this APEX must support at minimum. This is usually set to |
| // the SDK version that the APEX was first introduced. |
| Min_sdk_version *string |
| |
| // Whether this APEX is considered updatable or not. When set to true, this will enforce |
| // additional rules for making sure that the APEX is truly updatable. To be updatable, |
| // min_sdk_version should be set as well. This will also disable the size optimizations like |
| // symlinking to the system libs. Default is true. |
| Updatable *bool |
| |
| // Marks that this APEX is designed to be updatable in the future, although it's not |
| // updatable yet. This is used to mimic some of the build behaviors that are applied only to |
| // updatable APEXes. Currently, this disables the size optimization, so that the size of |
| // APEX will not increase when the APEX is actually marked as truly updatable. Default is |
| // false. |
| Future_updatable *bool |
| |
| // Whether this APEX can use platform APIs or not. Can be set to true only when `updatable: |
| // false`. Default is false. |
| Platform_apis *bool |
| |
| // Whether this APEX is installable to one of the partitions like system, vendor, etc. |
| // Default: true. |
| Installable *bool |
| |
| // If set true, VNDK libs are considered as stable libs and are not included in this APEX. |
| // Should be only used in non-system apexes (e.g. vendor: true). Default is false. |
| Use_vndk_as_stable *bool |
| |
| // The type of filesystem to use. Either 'ext4', 'f2fs' or 'erofs'. Default 'ext4'. |
| Payload_fs_type *string |
| |
| // For telling the APEX to ignore special handling for system libraries such as bionic. |
| // Default is false. |
| Ignore_system_library_special_case *bool |
| |
| // Whenever apex_payload.img of the APEX should include dm-verity hashtree. |
| // Default value is true. |
| Generate_hashtree *bool |
| |
| // Whenever apex_payload.img of the APEX should not be dm-verity signed. Should be only |
| // used in tests. |
| Test_only_unsigned_payload *bool |
| |
| // Whenever apex should be compressed, regardless of product flag used. Should be only |
| // used in tests. |
| Test_only_force_compression *bool |
| |
| // Put extra tags (signer=<value>) to apexkeys.txt, so that release tools can sign this apex |
| // with the tool to sign payload contents. |
| Custom_sign_tool *string |
| |
| // Whether this is a dynamic common lib apex, if so the native shared libs will be placed |
| // in a special way that include the digest of the lib file under /lib(64)? |
| Dynamic_common_lib_apex *bool |
| |
| // Canonical name of this APEX bundle. Used to determine the path to the |
| // activated APEX on device (i.e. /apex/<apexVariationName>), and used for the |
| // apex mutator variations. For override_apex modules, this is the name of the |
| // overridden base module. |
| ApexVariationName string `blueprint:"mutated"` |
| |
| IsCoverageVariant bool `blueprint:"mutated"` |
| |
| // List of sanitizer names that this APEX is enabled for |
| SanitizerNames []string `blueprint:"mutated"` |
| |
| PreventInstall bool `blueprint:"mutated"` |
| |
| HideFromMake bool `blueprint:"mutated"` |
| |
| // Name that dependencies can specify in their apex_available properties to refer to this module. |
| // If not specified, this defaults to Soong module name. This must be the name of a Soong module. |
| Apex_available_name *string |
| |
| // Variant version of the mainline module. Must be an integer between 0-9 |
| Variant_version *string |
| } |
| |
| type ApexNativeDependencies struct { |
| // List of native libraries that are embedded inside this APEX. |
| Native_shared_libs []string |
| |
| // List of JNI libraries that are embedded inside this APEX. |
| Jni_libs []string |
| |
| // List of rust dyn libraries that are embedded inside this APEX. |
| Rust_dyn_libs []string |
| |
| // List of native executables that are embedded inside this APEX. |
| Binaries []string |
| |
| // List of native tests that are embedded inside this APEX. |
| Tests []string |
| |
| // List of filesystem images that are embedded inside this APEX bundle. |
| Filesystems []string |
| |
| // List of native libraries to exclude from this APEX. |
| Exclude_native_shared_libs []string |
| |
| // List of JNI libraries to exclude from this APEX. |
| Exclude_jni_libs []string |
| |
| // List of rust dyn libraries to exclude from this APEX. |
| Exclude_rust_dyn_libs []string |
| |
| // List of native executables to exclude from this APEX. |
| Exclude_binaries []string |
| |
| // List of native tests to exclude from this APEX. |
| Exclude_tests []string |
| |
| // List of filesystem images to exclude from this APEX bundle. |
| Exclude_filesystems []string |
| } |
| |
| // Merge combines another ApexNativeDependencies into this one |
| func (a *ApexNativeDependencies) Merge(b ApexNativeDependencies) { |
| a.Native_shared_libs = append(a.Native_shared_libs, b.Native_shared_libs...) |
| a.Jni_libs = append(a.Jni_libs, b.Jni_libs...) |
| a.Rust_dyn_libs = append(a.Rust_dyn_libs, b.Rust_dyn_libs...) |
| a.Binaries = append(a.Binaries, b.Binaries...) |
| a.Tests = append(a.Tests, b.Tests...) |
| a.Filesystems = append(a.Filesystems, b.Filesystems...) |
| |
| a.Exclude_native_shared_libs = append(a.Exclude_native_shared_libs, b.Exclude_native_shared_libs...) |
| a.Exclude_jni_libs = append(a.Exclude_jni_libs, b.Exclude_jni_libs...) |
| a.Exclude_rust_dyn_libs = append(a.Exclude_rust_dyn_libs, b.Exclude_rust_dyn_libs...) |
| a.Exclude_binaries = append(a.Exclude_binaries, b.Exclude_binaries...) |
| a.Exclude_tests = append(a.Exclude_tests, b.Exclude_tests...) |
| a.Exclude_filesystems = append(a.Exclude_filesystems, b.Exclude_filesystems...) |
| } |
| |
| type apexMultilibProperties struct { |
| // Native dependencies whose compile_multilib is "first" |
| First ApexNativeDependencies |
| |
| // Native dependencies whose compile_multilib is "both" |
| Both ApexNativeDependencies |
| |
| // Native dependencies whose compile_multilib is "prefer32" |
| Prefer32 ApexNativeDependencies |
| |
| // Native dependencies whose compile_multilib is "32" |
| Lib32 ApexNativeDependencies |
| |
| // Native dependencies whose compile_multilib is "64" |
| Lib64 ApexNativeDependencies |
| } |
| |
| type apexTargetBundleProperties struct { |
| Target struct { |
| // Multilib properties only for android. |
| Android struct { |
| Multilib apexMultilibProperties |
| } |
| |
| // Multilib properties only for host. |
| Host struct { |
| Multilib apexMultilibProperties |
| } |
| |
| // Multilib properties only for host linux_bionic. |
| Linux_bionic struct { |
| Multilib apexMultilibProperties |
| } |
| |
| // Multilib properties only for host linux_glibc. |
| Linux_glibc struct { |
| Multilib apexMultilibProperties |
| } |
| } |
| } |
| |
| type apexArchBundleProperties struct { |
| Arch struct { |
| Arm struct { |
| ApexNativeDependencies |
| } |
| Arm64 struct { |
| ApexNativeDependencies |
| } |
| Riscv64 struct { |
| ApexNativeDependencies |
| } |
| X86 struct { |
| ApexNativeDependencies |
| } |
| X86_64 struct { |
| ApexNativeDependencies |
| } |
| } |
| } |
| |
| // These properties can be used in override_apex to override the corresponding properties in the |
| // base apex. |
| type overridableProperties struct { |
| // List of APKs that are embedded inside this APEX. |
| Apps []string |
| |
| // List of prebuilt files that are embedded inside this APEX bundle. |
| Prebuilts []string |
| |
| // List of BPF programs inside this APEX bundle. |
| Bpfs []string |
| |
| // Names of modules to be overridden. Listed modules can only be other binaries (in Make or |
| // Soong). This does not completely prevent installation of the overridden binaries, but if |
| // both binaries would be installed by default (in PRODUCT_PACKAGES) the other binary will |
| // be removed from PRODUCT_PACKAGES. |
| Overrides []string |
| |
| // Logging parent value. |
| Logging_parent string |
| |
| // Apex Container package name. Override value for attribute package:name in |
| // AndroidManifest.xml |
| Package_name string |
| |
| // A txt file containing list of files that are allowed to be included in this APEX. |
| Allowed_files *string `android:"path"` |
| |
| // Name of the apex_key module that provides the private key to sign this APEX bundle. |
| Key *string |
| |
| // Specifies the certificate and the private key to sign the zip container of this APEX. If |
| // this is "foo", foo.x509.pem and foo.pk8 under PRODUCT_DEFAULT_DEV_CERTIFICATE are used |
| // as the certificate and the private key, respectively. If this is ":module", then the |
| // certificate and the private key are provided from the android_app_certificate module |
| // named "module". |
| Certificate *string |
| |
| // Whether this APEX can be compressed or not. Setting this property to false means this |
| // APEX will never be compressed. When set to true, APEX will be compressed if other |
| // conditions, e.g., target device needs to support APEX compression, are also fulfilled. |
| // Default: false. |
| Compressible *bool |
| |
| // Trim against a specific Dynamic Common Lib APEX |
| Trim_against *string |
| } |
| |
| type apexBundle struct { |
| // Inherited structs |
| android.ModuleBase |
| android.DefaultableModuleBase |
| android.OverridableModuleBase |
| android.BazelModuleBase |
| multitree.ExportableModuleBase |
| |
| // Properties |
| properties apexBundleProperties |
| targetProperties apexTargetBundleProperties |
| archProperties apexArchBundleProperties |
| overridableProperties overridableProperties |
| vndkProperties apexVndkProperties // only for apex_vndk modules |
| |
| /////////////////////////////////////////////////////////////////////////////////////////// |
| // Inputs |
| |
| // Keys for apex_payload.img |
| publicKeyFile android.Path |
| privateKeyFile android.Path |
| |
| // Cert/priv-key for the zip container |
| containerCertificateFile android.Path |
| containerPrivateKeyFile android.Path |
| |
| // Flags for special variants of APEX |
| testApex bool |
| vndkApex bool |
| |
| // File system type of apex_payload.img |
| payloadFsType fsType |
| |
| // Whether to create symlink to the system file instead of having a file inside the apex or |
| // not |
| linkToSystemLib bool |
| |
| // List of files to be included in this APEX. This is filled in the first part of |
| // GenerateAndroidBuildActions. |
| filesInfo []apexFile |
| |
| // List of other module names that should be installed when this APEX gets installed (LOCAL_REQUIRED_MODULES). |
| makeModulesToInstall []string |
| |
| /////////////////////////////////////////////////////////////////////////////////////////// |
| // Outputs (final and intermediates) |
| |
| // Processed apex manifest in JSONson format (for Q) |
| manifestJsonOut android.WritablePath |
| |
| // Processed apex manifest in PB format (for R+) |
| manifestPbOut android.WritablePath |
| |
| // Processed file_contexts files |
| fileContexts android.WritablePath |
| |
| // The built APEX file. This is the main product. |
| // Could be .apex or .capex |
| outputFile android.WritablePath |
| |
| // The built uncompressed .apex file. |
| outputApexFile android.WritablePath |
| |
| // The built APEX file in app bundle format. This file is not directly installed to the |
| // device. For an APEX, multiple app bundles are created each of which is for a specific ABI |
| // like arm, arm64, x86, etc. Then they are processed again (outside of the Android build |
| // system) to be merged into a single app bundle file that Play accepts. See |
| // vendor/google/build/build_unbundled_mainline_module.sh for more detail. |
| bundleModuleFile android.WritablePath |
| |
| // Target directory to install this APEX. Usually out/target/product/<device>/<partition>/apex. |
| installDir android.InstallPath |
| |
| // Path where this APEX was installed. |
| installedFile android.InstallPath |
| |
| // Installed locations of symlinks for backward compatibility. |
| compatSymlinks android.InstallPaths |
| |
| // Text file having the list of individual files that are included in this APEX. Used for |
| // debugging purpose. |
| installedFilesFile android.WritablePath |
| |
| // List of module names that this APEX is including (to be shown via *-deps-info target). |
| // Used for debugging purpose. |
| android.ApexBundleDepsInfo |
| |
| // Optional list of lint report zip files for apexes that contain java or app modules |
| lintReports android.Paths |
| |
| isCompressed bool |
| |
| // Path of API coverage generate file |
| nativeApisUsedByModuleFile android.ModuleOutPath |
| nativeApisBackedByModuleFile android.ModuleOutPath |
| javaApisUsedByModuleFile android.ModuleOutPath |
| |
| // Collect the module directory for IDE info in java/jdeps.go. |
| modulePaths []string |
| } |
| |
| // apexFileClass represents a type of file that can be included in APEX. |
| type apexFileClass int |
| |
| const ( |
| app apexFileClass = iota |
| appSet |
| etc |
| javaSharedLib |
| nativeExecutable |
| nativeSharedLib |
| nativeTest |
| shBinary |
| ) |
| |
| var ( |
| classes = map[string]apexFileClass{ |
| "app": app, |
| "appSet": appSet, |
| "etc": etc, |
| "javaSharedLib": javaSharedLib, |
| "nativeExecutable": nativeExecutable, |
| "nativeSharedLib": nativeSharedLib, |
| "nativeTest": nativeTest, |
| "shBinary": shBinary, |
| } |
| ) |
| |
| // apexFile represents a file in an APEX bundle. This is created during the first half of |
| // GenerateAndroidBuildActions by traversing the dependencies of the APEX. Then in the second half |
| // of the function, this is used to create commands that copies the files into a staging directory, |
| // where they are packaged into the APEX file. |
| type apexFile struct { |
| // buildFile is put in the installDir inside the APEX. |
| builtFile android.Path |
| installDir string |
| partition string |
| customStem string |
| symlinks []string // additional symlinks |
| |
| // Info for Android.mk Module name of `module` in AndroidMk. Note the generated AndroidMk |
| // module for apexFile is named something like <AndroidMk module name>.<apex name>[<apex |
| // suffix>] |
| androidMkModuleName string // becomes LOCAL_MODULE |
| class apexFileClass // becomes LOCAL_MODULE_CLASS |
| moduleDir string // becomes LOCAL_PATH |
| requiredModuleNames []string // becomes LOCAL_REQUIRED_MODULES |
| targetRequiredModuleNames []string // becomes LOCAL_TARGET_REQUIRED_MODULES |
| hostRequiredModuleNames []string // becomes LOCAL_HOST_REQUIRED_MODULES |
| dataPaths []android.DataPath // becomes LOCAL_TEST_DATA |
| |
| jacocoReportClassesFile android.Path // only for javalibs and apps |
| lintDepSets java.LintDepSets // only for javalibs and apps |
| certificate java.Certificate // only for apps |
| overriddenPackageName string // only for apps |
| |
| transitiveDep bool |
| isJniLib bool |
| |
| multilib string |
| |
| isBazelPrebuilt bool |
| unstrippedBuiltFile android.Path |
| arch string |
| |
| // TODO(jiyong): remove this |
| module android.Module |
| } |
| |
| // TODO(jiyong): shorten the arglist using an option struct |
| func newApexFile(ctx android.BaseModuleContext, builtFile android.Path, androidMkModuleName string, installDir string, class apexFileClass, module android.Module) apexFile { |
| ret := apexFile{ |
| builtFile: builtFile, |
| installDir: installDir, |
| androidMkModuleName: androidMkModuleName, |
| class: class, |
| module: module, |
| } |
| if module != nil { |
| ret.moduleDir = ctx.OtherModuleDir(module) |
| ret.partition = module.PartitionTag(ctx.DeviceConfig()) |
| ret.requiredModuleNames = module.RequiredModuleNames() |
| ret.targetRequiredModuleNames = module.TargetRequiredModuleNames() |
| ret.hostRequiredModuleNames = module.HostRequiredModuleNames() |
| ret.multilib = module.Target().Arch.ArchType.Multilib |
| } |
| return ret |
| } |
| |
| func (af *apexFile) ok() bool { |
| return af.builtFile != nil && af.builtFile.String() != "" |
| } |
| |
| // apexRelativePath returns the relative path of the given path from the install directory of this |
| // apexFile. |
| // TODO(jiyong): rename this |
| func (af *apexFile) apexRelativePath(path string) string { |
| return filepath.Join(af.installDir, path) |
| } |
| |
| // path returns path of this apex file relative to the APEX root |
| func (af *apexFile) path() string { |
| return af.apexRelativePath(af.stem()) |
| } |
| |
| // stem returns the base filename of this apex file |
| func (af *apexFile) stem() string { |
| if af.customStem != "" { |
| return af.customStem |
| } |
| return af.builtFile.Base() |
| } |
| |
| // symlinkPaths returns paths of the symlinks (if any) relative to the APEX root |
| func (af *apexFile) symlinkPaths() []string { |
| var ret []string |
| for _, symlink := range af.symlinks { |
| ret = append(ret, af.apexRelativePath(symlink)) |
| } |
| return ret |
| } |
| |
| // availableToPlatform tests whether this apexFile is from a module that can be installed to the |
| // platform. |
| func (af *apexFile) availableToPlatform() bool { |
| if af.module == nil { |
| return false |
| } |
| if am, ok := af.module.(android.ApexModule); ok { |
| return am.AvailableFor(android.AvailableToPlatform) |
| } |
| return false |
| } |
| |
| //////////////////////////////////////////////////////////////////////////////////////////////////// |
| // Mutators |
| // |
| // Brief description about mutators for APEX. The following three mutators are the most important |
| // ones. |
| // |
| // 1) DepsMutator: from the properties like native_shared_libs, java_libs, etc., modules are added |
| // to the (direct) dependencies of this APEX bundle. |
| // |
| // 2) apexInfoMutator: this is a post-deps mutator, so runs after DepsMutator. Its goal is to |
| // collect modules that are direct and transitive dependencies of each APEX bundle. The collected |
| // modules are marked as being included in the APEX via BuildForApex(). |
| // |
| // 3) apexMutator: this is a post-deps mutator that runs after apexInfoMutator. For each module that |
| // are marked by the apexInfoMutator, apex variations are created using CreateApexVariations(). |
| |
| type dependencyTag struct { |
| blueprint.BaseDependencyTag |
| name string |
| |
| // Determines if the dependent will be part of the APEX payload. Can be false for the |
| // dependencies to the signing key module, etc. |
| payload bool |
| |
| // True if the dependent can only be a source module, false if a prebuilt module is a suitable |
| // replacement. This is needed because some prebuilt modules do not provide all the information |
| // needed by the apex. |
| sourceOnly bool |
| |
| // If not-nil and an APEX is a member of an SDK then dependencies of that APEX with this tag will |
| // also be added as exported members of that SDK. |
| memberType android.SdkMemberType |
| } |
| |
| func (d *dependencyTag) SdkMemberType(_ android.Module) android.SdkMemberType { |
| return d.memberType |
| } |
| |
| func (d *dependencyTag) ExportMember() bool { |
| return true |
| } |
| |
| func (d *dependencyTag) String() string { |
| return fmt.Sprintf("apex.dependencyTag{%q}", d.name) |
| } |
| |
| func (d *dependencyTag) ReplaceSourceWithPrebuilt() bool { |
| return !d.sourceOnly |
| } |
| |
| var _ android.ReplaceSourceWithPrebuilt = &dependencyTag{} |
| var _ android.SdkMemberDependencyTag = &dependencyTag{} |
| |
| var ( |
| androidAppTag = &dependencyTag{name: "androidApp", payload: true} |
| bpfTag = &dependencyTag{name: "bpf", payload: true} |
| certificateTag = &dependencyTag{name: "certificate"} |
| dclaTag = &dependencyTag{name: "dcla"} |
| executableTag = &dependencyTag{name: "executable", payload: true} |
| fsTag = &dependencyTag{name: "filesystem", payload: true} |
| bcpfTag = &dependencyTag{name: "bootclasspathFragment", payload: true, sourceOnly: true, memberType: java.BootclasspathFragmentSdkMemberType} |
| sscpfTag = &dependencyTag{name: "systemserverclasspathFragment", payload: true, sourceOnly: true, memberType: java.SystemServerClasspathFragmentSdkMemberType} |
| compatConfigTag = &dependencyTag{name: "compatConfig", payload: true, sourceOnly: true, memberType: java.CompatConfigSdkMemberType} |
| javaLibTag = &dependencyTag{name: "javaLib", payload: true} |
| jniLibTag = &dependencyTag{name: "jniLib", payload: true} |
| keyTag = &dependencyTag{name: "key"} |
| prebuiltTag = &dependencyTag{name: "prebuilt", payload: true} |
| rroTag = &dependencyTag{name: "rro", payload: true} |
| sharedLibTag = &dependencyTag{name: "sharedLib", payload: true} |
| testForTag = &dependencyTag{name: "test for"} |
| testTag = &dependencyTag{name: "test", payload: true} |
| shBinaryTag = &dependencyTag{name: "shBinary", payload: true} |
| ) |
| |
| // TODO(jiyong): shorten this function signature |
| func addDependenciesForNativeModules(ctx android.BottomUpMutatorContext, nativeModules ApexNativeDependencies, target android.Target, imageVariation string) { |
| binVariations := target.Variations() |
| libVariations := append(target.Variations(), blueprint.Variation{Mutator: "link", Variation: "shared"}) |
| rustLibVariations := append(target.Variations(), blueprint.Variation{Mutator: "rust_libraries", Variation: "dylib"}) |
| |
| // Append "image" variation |
| binVariations = append(binVariations, blueprint.Variation{Mutator: "image", Variation: imageVariation}) |
| libVariations = append(libVariations, blueprint.Variation{Mutator: "image", Variation: imageVariation}) |
| rustLibVariations = append(rustLibVariations, blueprint.Variation{Mutator: "image", Variation: imageVariation}) |
| |
| // Use *FarVariation* to be able to depend on modules having conflicting variations with |
| // this module. This is required since arch variant of an APEX bundle is 'common' but it is |
| // 'arm' or 'arm64' for native shared libs. |
| ctx.AddFarVariationDependencies(binVariations, executableTag, |
| android.RemoveListFromList(nativeModules.Binaries, nativeModules.Exclude_binaries)...) |
| ctx.AddFarVariationDependencies(binVariations, testTag, |
| android.RemoveListFromList(nativeModules.Tests, nativeModules.Exclude_tests)...) |
| ctx.AddFarVariationDependencies(libVariations, jniLibTag, |
| android.RemoveListFromList(nativeModules.Jni_libs, nativeModules.Exclude_jni_libs)...) |
| ctx.AddFarVariationDependencies(libVariations, sharedLibTag, |
| android.RemoveListFromList(nativeModules.Native_shared_libs, nativeModules.Exclude_native_shared_libs)...) |
| ctx.AddFarVariationDependencies(rustLibVariations, sharedLibTag, |
| android.RemoveListFromList(nativeModules.Rust_dyn_libs, nativeModules.Exclude_rust_dyn_libs)...) |
| ctx.AddFarVariationDependencies(target.Variations(), fsTag, |
| android.RemoveListFromList(nativeModules.Filesystems, nativeModules.Exclude_filesystems)...) |
| } |
| |
| func (a *apexBundle) combineProperties(ctx android.BottomUpMutatorContext) { |
| proptools.AppendProperties(&a.properties.Multilib, &a.targetProperties.Target.Android.Multilib, nil) |
| } |
| |
| // getImageVariationPair returns a pair for the image variation name as its |
| // prefix and suffix. The prefix indicates whether it's core/vendor/product and the |
| // suffix indicates the vndk version when it's vendor or product. |
| // getImageVariation can simply join the result of this function to get the |
| // image variation name. |
| func (a *apexBundle) getImageVariationPair(deviceConfig android.DeviceConfig) (string, string) { |
| if a.vndkApex { |
| return cc.VendorVariationPrefix, a.vndkVersion(deviceConfig) |
| } |
| |
| var prefix string |
| var vndkVersion string |
| if deviceConfig.VndkVersion() != "" { |
| if a.SocSpecific() || a.DeviceSpecific() { |
| prefix = cc.VendorVariationPrefix |
| vndkVersion = deviceConfig.VndkVersion() |
| } else if a.ProductSpecific() { |
| prefix = cc.ProductVariationPrefix |
| vndkVersion = deviceConfig.ProductVndkVersion() |
| } |
| } |
| if vndkVersion == "current" { |
| vndkVersion = deviceConfig.PlatformVndkVersion() |
| } |
| if vndkVersion != "" { |
| return prefix, vndkVersion |
| } |
| |
| return android.CoreVariation, "" // The usual case |
| } |
| |
| // getImageVariation returns the image variant name for this apexBundle. In most cases, it's simply |
| // android.CoreVariation, but gets complicated for the vendor APEXes and the VNDK APEX. |
| func (a *apexBundle) getImageVariation(ctx android.BottomUpMutatorContext) string { |
| prefix, vndkVersion := a.getImageVariationPair(ctx.DeviceConfig()) |
| return prefix + vndkVersion |
| } |
| |
| func (a *apexBundle) DepsMutator(ctx android.BottomUpMutatorContext) { |
| // apexBundle is a multi-arch targets module. Arch variant of apexBundle is set to 'common'. |
| // arch-specific targets are enabled by the compile_multilib setting of the apex bundle. For |
| // each target os/architectures, appropriate dependencies are selected by their |
| // target.<os>.multilib.<type> groups and are added as (direct) dependencies. |
| targets := ctx.MultiTargets() |
| imageVariation := a.getImageVariation(ctx) |
| |
| a.combineProperties(ctx) |
| |
| has32BitTarget := false |
| for _, target := range targets { |
| if target.Arch.ArchType.Multilib == "lib32" { |
| has32BitTarget = true |
| } |
| } |
| for i, target := range targets { |
| var deps ApexNativeDependencies |
| |
| // Add native modules targeting both ABIs. When multilib.* is omitted for |
| // native_shared_libs/jni_libs/tests, it implies multilib.both |
| deps.Merge(a.properties.Multilib.Both) |
| deps.Merge(ApexNativeDependencies{ |
| Native_shared_libs: a.properties.Native_shared_libs, |
| Tests: a.properties.Tests, |
| Jni_libs: a.properties.Jni_libs, |
| Binaries: nil, |
| }) |
| |
| // Add native modules targeting the first ABI When multilib.* is omitted for |
| // binaries, it implies multilib.first |
| isPrimaryAbi := i == 0 |
| if isPrimaryAbi { |
| deps.Merge(a.properties.Multilib.First) |
| deps.Merge(ApexNativeDependencies{ |
| Native_shared_libs: nil, |
| Tests: nil, |
| Jni_libs: nil, |
| Binaries: a.properties.Binaries, |
| }) |
| } |
| |
| // Add native modules targeting either 32-bit or 64-bit ABI |
| switch target.Arch.ArchType.Multilib { |
| case "lib32": |
| deps.Merge(a.properties.Multilib.Lib32) |
| deps.Merge(a.properties.Multilib.Prefer32) |
| case "lib64": |
| deps.Merge(a.properties.Multilib.Lib64) |
| if !has32BitTarget { |
| deps.Merge(a.properties.Multilib.Prefer32) |
| } |
| } |
| |
| // Add native modules targeting a specific arch variant |
| switch target.Arch.ArchType { |
| case android.Arm: |
| deps.Merge(a.archProperties.Arch.Arm.ApexNativeDependencies) |
| case android.Arm64: |
| deps.Merge(a.archProperties.Arch.Arm64.ApexNativeDependencies) |
| case android.Riscv64: |
| deps.Merge(a.archProperties.Arch.Riscv64.ApexNativeDependencies) |
| case android.X86: |
| deps.Merge(a.archProperties.Arch.X86.ApexNativeDependencies) |
| case android.X86_64: |
| deps.Merge(a.archProperties.Arch.X86_64.ApexNativeDependencies) |
| default: |
| panic(fmt.Errorf("unsupported arch %v\n", ctx.Arch().ArchType)) |
| } |
| |
| addDependenciesForNativeModules(ctx, deps, target, imageVariation) |
| ctx.AddFarVariationDependencies([]blueprint.Variation{ |
| {Mutator: "os", Variation: target.OsVariation()}, |
| {Mutator: "arch", Variation: target.ArchVariation()}, |
| }, shBinaryTag, a.properties.Sh_binaries...) |
| } |
| |
| // Common-arch dependencies come next |
| commonVariation := ctx.Config().AndroidCommonTarget.Variations() |
| ctx.AddFarVariationDependencies(commonVariation, rroTag, a.properties.Rros...) |
| ctx.AddFarVariationDependencies(commonVariation, bcpfTag, a.properties.Bootclasspath_fragments...) |
| ctx.AddFarVariationDependencies(commonVariation, sscpfTag, a.properties.Systemserverclasspath_fragments...) |
| ctx.AddFarVariationDependencies(commonVariation, javaLibTag, a.properties.Java_libs...) |
| ctx.AddFarVariationDependencies(commonVariation, fsTag, a.properties.Filesystems...) |
| ctx.AddFarVariationDependencies(commonVariation, compatConfigTag, a.properties.Compat_configs...) |
| } |
| |
| // DepsMutator for the overridden properties. |
| func (a *apexBundle) OverridablePropertiesDepsMutator(ctx android.BottomUpMutatorContext) { |
| if a.overridableProperties.Allowed_files != nil { |
| android.ExtractSourceDeps(ctx, a.overridableProperties.Allowed_files) |
| } |
| |
| commonVariation := ctx.Config().AndroidCommonTarget.Variations() |
| ctx.AddFarVariationDependencies(commonVariation, androidAppTag, a.overridableProperties.Apps...) |
| ctx.AddFarVariationDependencies(commonVariation, bpfTag, a.overridableProperties.Bpfs...) |
| if prebuilts := a.overridableProperties.Prebuilts; len(prebuilts) > 0 { |
| // For prebuilt_etc, use the first variant (64 on 64/32bit device, 32 on 32bit device) |
| // regardless of the TARGET_PREFER_* setting. See b/144532908 |
| arches := ctx.DeviceConfig().Arches() |
| if len(arches) != 0 { |
| archForPrebuiltEtc := arches[0] |
| for _, arch := range arches { |
| // Prefer 64-bit arch if there is any |
| if arch.ArchType.Multilib == "lib64" { |
| archForPrebuiltEtc = arch |
| break |
| } |
| } |
| ctx.AddFarVariationDependencies([]blueprint.Variation{ |
| {Mutator: "os", Variation: ctx.Os().String()}, |
| {Mutator: "arch", Variation: archForPrebuiltEtc.String()}, |
| }, prebuiltTag, prebuilts...) |
| } |
| } |
| |
| // Dependencies for signing |
| if String(a.overridableProperties.Key) == "" { |
| ctx.PropertyErrorf("key", "missing") |
| return |
| } |
| ctx.AddDependency(ctx.Module(), keyTag, String(a.overridableProperties.Key)) |
| |
| cert := android.SrcIsModule(a.getCertString(ctx)) |
| if cert != "" { |
| ctx.AddDependency(ctx.Module(), certificateTag, cert) |
| // empty cert is not an error. Cert and private keys will be directly found under |
| // PRODUCT_DEFAULT_DEV_CERTIFICATE |
| } |
| } |
| |
| func apexDCLADepsMutator(mctx android.BottomUpMutatorContext) { |
| if !mctx.Config().ApexTrimEnabled() { |
| return |
| } |
| if a, ok := mctx.Module().(*apexBundle); ok && a.overridableProperties.Trim_against != nil { |
| commonVariation := mctx.Config().AndroidCommonTarget.Variations() |
| mctx.AddFarVariationDependencies(commonVariation, dclaTag, String(a.overridableProperties.Trim_against)) |
| } else if o, ok := mctx.Module().(*OverrideApex); ok { |
| for _, p := range o.GetProperties() { |
| properties, ok := p.(*overridableProperties) |
| if !ok { |
| continue |
| } |
| if properties.Trim_against != nil { |
| commonVariation := mctx.Config().AndroidCommonTarget.Variations() |
| mctx.AddFarVariationDependencies(commonVariation, dclaTag, String(properties.Trim_against)) |
| } |
| } |
| } |
| } |
| |
| type DCLAInfo struct { |
| ProvidedLibs []string |
| } |
| |
| var DCLAInfoProvider = blueprint.NewMutatorProvider(DCLAInfo{}, "apex_info") |
| |
| type ApexBundleInfo struct { |
| Contents *android.ApexContents |
| } |
| |
| var ApexBundleInfoProvider = blueprint.NewMutatorProvider(ApexBundleInfo{}, "apex_info") |
| |
| var _ ApexInfoMutator = (*apexBundle)(nil) |
| |
| func (a *apexBundle) ApexVariationName() string { |
| return a.properties.ApexVariationName |
| } |
| |
| // ApexInfoMutator is responsible for collecting modules that need to have apex variants. They are |
| // identified by doing a graph walk starting from an apexBundle. Basically, all the (direct and |
| // indirect) dependencies are collected. But a few types of modules that shouldn't be included in |
| // the apexBundle (e.g. stub libraries) are not collected. Note that a single module can be depended |
| // on by multiple apexBundles. In that case, the module is collected for all of the apexBundles. |
| // |
| // For each dependency between an apex and an ApexModule an ApexInfo object describing the apex |
| // is passed to that module's BuildForApex(ApexInfo) method which collates them all in a list. |
| // The apexMutator uses that list to create module variants for the apexes to which it belongs. |
| // The relationship between module variants and apexes is not one-to-one as variants will be |
| // shared between compatible apexes. |
| func (a *apexBundle) ApexInfoMutator(mctx android.TopDownMutatorContext) { |
| |
| // The VNDK APEX is special. For the APEX, the membership is described in a very different |
| // way. There is no dependency from the VNDK APEX to the VNDK libraries. Instead, VNDK |
| // libraries are self-identified by their vndk.enabled properties. There is no need to run |
| // this mutator for the APEX as nothing will be collected. So, let's return fast. |
| if a.vndkApex { |
| return |
| } |
| |
| // Special casing for APEXes on non-system (e.g., vendor, odm, etc.) partitions. They are |
| // provided with a property named use_vndk_as_stable, which when set to true doesn't collect |
| // VNDK libraries as transitive dependencies. This option is useful for reducing the size of |
| // the non-system APEXes because the VNDK libraries won't be included (and duped) in the |
| // APEX, but shared across APEXes via the VNDK APEX. |
| useVndk := a.SocSpecific() || a.DeviceSpecific() || (a.ProductSpecific() && mctx.Config().EnforceProductPartitionInterface()) |
| excludeVndkLibs := useVndk && a.useVndkAsStable(mctx) |
| if proptools.Bool(a.properties.Use_vndk_as_stable) { |
| if !useVndk { |
| mctx.PropertyErrorf("use_vndk_as_stable", "not supported for system/system_ext APEXes") |
| } |
| if a.minSdkVersionValue(mctx) != "" { |
| mctx.PropertyErrorf("use_vndk_as_stable", "not supported when min_sdk_version is set") |
| } |
| mctx.VisitDirectDepsWithTag(sharedLibTag, func(dep android.Module) { |
| if c, ok := dep.(*cc.Module); ok && c.IsVndk() { |
| mctx.PropertyErrorf("use_vndk_as_stable", "Trying to include a VNDK library(%s) while use_vndk_as_stable is true.", dep.Name()) |
| } |
| }) |
| if mctx.Failed() { |
| return |
| } |
| } |
| |
| continueApexDepsWalk := func(child, parent android.Module) bool { |
| am, ok := child.(android.ApexModule) |
| if !ok || !am.CanHaveApexVariants() { |
| return false |
| } |
| depTag := mctx.OtherModuleDependencyTag(child) |
| |
| // Check to see if the tag always requires that the child module has an apex variant for every |
| // apex variant of the parent module. If it does not then it is still possible for something |
| // else, e.g. the DepIsInSameApex(...) method to decide that a variant is required. |
| if required, ok := depTag.(android.AlwaysRequireApexVariantTag); ok && required.AlwaysRequireApexVariant() { |
| return true |
| } |
| if !android.IsDepInSameApex(mctx, parent, child) { |
| return false |
| } |
| if excludeVndkLibs { |
| if c, ok := child.(*cc.Module); ok && c.IsVndk() { |
| return false |
| } |
| } |
| // By default, all the transitive dependencies are collected, unless filtered out |
| // above. |
| return true |
| } |
| |
| // Records whether a certain module is included in this apexBundle via direct dependency or |
| // inndirect dependency. |
| contents := make(map[string]android.ApexMembership) |
| mctx.WalkDeps(func(child, parent android.Module) bool { |
| if !continueApexDepsWalk(child, parent) { |
| return false |
| } |
| // If the parent is apexBundle, this child is directly depended. |
| _, directDep := parent.(*apexBundle) |
| depName := mctx.OtherModuleName(child) |
| contents[depName] = contents[depName].Add(directDep) |
| return true |
| }) |
| |
| // The membership information is saved for later access |
| apexContents := android.NewApexContents(contents) |
| mctx.SetProvider(ApexBundleInfoProvider, ApexBundleInfo{ |
| Contents: apexContents, |
| }) |
| |
| minSdkVersion := a.minSdkVersion(mctx) |
| // When min_sdk_version is not set, the apex is built against FutureApiLevel. |
| if minSdkVersion.IsNone() { |
| minSdkVersion = android.FutureApiLevel |
| } |
| |
| // This is the main part of this mutator. Mark the collected dependencies that they need to |
| // be built for this apexBundle. |
| |
| apexVariationName := mctx.ModuleName() // could be com.android.foo |
| a.properties.ApexVariationName = apexVariationName |
| testApexes := []string{} |
| if a.testApex { |
| testApexes = []string{apexVariationName} |
| } |
| apexInfo := android.ApexInfo{ |
| ApexVariationName: apexVariationName, |
| MinSdkVersion: minSdkVersion, |
| Updatable: a.Updatable(), |
| UsePlatformApis: a.UsePlatformApis(), |
| InApexVariants: []string{apexVariationName}, |
| InApexModules: []string{a.Name()}, // could be com.mycompany.android.foo |
| ApexContents: []*android.ApexContents{apexContents}, |
| TestApexes: testApexes, |
| } |
| mctx.WalkDeps(func(child, parent android.Module) bool { |
| if !continueApexDepsWalk(child, parent) { |
| return false |
| } |
| child.(android.ApexModule).BuildForApex(apexInfo) // leave a mark! |
| return true |
| }) |
| |
| if a.dynamic_common_lib_apex() { |
| mctx.SetProvider(DCLAInfoProvider, DCLAInfo{ |
| ProvidedLibs: a.properties.Native_shared_libs, |
| }) |
| } |
| } |
| |
| type ApexInfoMutator interface { |
| // ApexVariationName returns the name of the APEX variation to use in the apex |
| // mutator etc. It is the same name as ApexInfo.ApexVariationName. |
| ApexVariationName() string |
| |
| // ApexInfoMutator implementations must call BuildForApex(ApexInfo) on any modules that are |
| // depended upon by an apex and which require an apex specific variant. |
| ApexInfoMutator(android.TopDownMutatorContext) |
| } |
| |
| // apexInfoMutator delegates the work of identifying which modules need an ApexInfo and apex |
| // specific variant to modules that support the ApexInfoMutator. |
| // It also propagates updatable=true to apps of updatable apexes |
| func apexInfoMutator(mctx android.TopDownMutatorContext) { |
| if !mctx.Module().Enabled() { |
| return |
| } |
| |
| if a, ok := mctx.Module().(ApexInfoMutator); ok { |
| a.ApexInfoMutator(mctx) |
| } |
| enforceAppUpdatability(mctx) |
| } |
| |
| // apexStrictUpdatibilityLintMutator propagates strict_updatability_linting to transitive deps of a mainline module |
| // This check is enforced for updatable modules |
| func apexStrictUpdatibilityLintMutator(mctx android.TopDownMutatorContext) { |
| if !mctx.Module().Enabled() { |
| return |
| } |
| if apex, ok := mctx.Module().(*apexBundle); ok && apex.checkStrictUpdatabilityLinting() { |
| mctx.WalkDeps(func(child, parent android.Module) bool { |
| // b/208656169 Do not propagate strict updatability linting to libcore/ |
| // These libs are available on the classpath during compilation |
| // These libs are transitive deps of the sdk. See java/sdk.go:decodeSdkDep |
| // Only skip libraries defined in libcore root, not subdirectories |
| if mctx.OtherModuleDir(child) == "libcore" { |
| // Do not traverse transitive deps of libcore/ libs |
| return false |
| } |
| if android.InList(child.Name(), skipLintJavalibAllowlist) { |
| return false |
| } |
| if lintable, ok := child.(java.LintDepSetsIntf); ok { |
| lintable.SetStrictUpdatabilityLinting(true) |
| } |
| // visit transitive deps |
| return true |
| }) |
| } |
| } |
| |
| // enforceAppUpdatability propagates updatable=true to apps of updatable apexes |
| func enforceAppUpdatability(mctx android.TopDownMutatorContext) { |
| if !mctx.Module().Enabled() { |
| return |
| } |
| if apex, ok := mctx.Module().(*apexBundle); ok && apex.Updatable() { |
| // checking direct deps is sufficient since apex->apk is a direct edge, even when inherited via apex_defaults |
| mctx.VisitDirectDeps(func(module android.Module) { |
| // ignore android_test_app |
| if app, ok := module.(*java.AndroidApp); ok { |
| app.SetUpdatable(true) |
| } |
| }) |
| } |
| } |
| |
| // TODO: b/215736885 Whittle the denylist |
| // Transitive deps of certain mainline modules baseline NewApi errors |
| // Skip these mainline modules for now |
| var ( |
| skipStrictUpdatabilityLintAllowlist = []string{ |
| "com.android.art", |
| "com.android.art.debug", |
| "com.android.conscrypt", |
| "com.android.media", |
| // test apexes |
| "test_com.android.art", |
| "test_com.android.conscrypt", |
| "test_com.android.media", |
| "test_jitzygote_com.android.art", |
| } |
| |
| // TODO: b/215736885 Remove this list |
| skipLintJavalibAllowlist = []string{ |
| "conscrypt.module.platform.api.stubs", |
| "conscrypt.module.public.api.stubs", |
| "conscrypt.module.public.api.stubs.system", |
| "conscrypt.module.public.api.stubs.module_lib", |
| "framework-media.stubs", |
| "framework-media.stubs.system", |
| "framework-media.stubs.module_lib", |
| } |
| ) |
| |
| func (a *apexBundle) checkStrictUpdatabilityLinting() bool { |
| return a.Updatable() && !android.InList(a.ApexVariationName(), skipStrictUpdatabilityLintAllowlist) |
| } |
| |
| // apexUniqueVariationsMutator checks if any dependencies use unique apex variations. If so, use |
| // unique apex variations for this module. See android/apex.go for more about unique apex variant. |
| // TODO(jiyong): move this to android/apex.go? |
| func apexUniqueVariationsMutator(mctx android.BottomUpMutatorContext) { |
| if !mctx.Module().Enabled() { |
| return |
| } |
| if am, ok := mctx.Module().(android.ApexModule); ok { |
| android.UpdateUniqueApexVariationsForDeps(mctx, am) |
| } |
| } |
| |
| // apexTestForDepsMutator checks if this module is a test for an apex. If so, add a dependency on |
| // the apex in order to retrieve its contents later. |
| // TODO(jiyong): move this to android/apex.go? |
| func apexTestForDepsMutator(mctx android.BottomUpMutatorContext) { |
| if !mctx.Module().Enabled() { |
| return |
| } |
| if am, ok := mctx.Module().(android.ApexModule); ok { |
| if testFor := am.TestFor(); len(testFor) > 0 { |
| mctx.AddFarVariationDependencies([]blueprint.Variation{ |
| {Mutator: "os", Variation: am.Target().OsVariation()}, |
| {"arch", "common"}, |
| }, testForTag, testFor...) |
| } |
| } |
| } |
| |
| // TODO(jiyong): move this to android/apex.go? |
| func apexTestForMutator(mctx android.BottomUpMutatorContext) { |
| if !mctx.Module().Enabled() { |
| return |
| } |
| if _, ok := mctx.Module().(android.ApexModule); ok { |
| var contents []*android.ApexContents |
| for _, testFor := range mctx.GetDirectDepsWithTag(testForTag) { |
| abInfo := mctx.OtherModuleProvider(testFor, ApexBundleInfoProvider).(ApexBundleInfo) |
| contents = append(contents, abInfo.Contents) |
| } |
| mctx.SetProvider(android.ApexTestForInfoProvider, android.ApexTestForInfo{ |
| ApexContents: contents, |
| }) |
| } |
| } |
| |
| // markPlatformAvailability marks whether or not a module can be available to platform. A module |
| // cannot be available to platform if 1) it is explicitly marked as not available (i.e. |
| // "//apex_available:platform" is absent) or 2) it depends on another module that isn't (or can't |
| // be) available to platform |
| // TODO(jiyong): move this to android/apex.go? |
| func markPlatformAvailability(mctx android.BottomUpMutatorContext) { |
| // Recovery is not considered as platform |
| if mctx.Module().InstallInRecovery() { |
| return |
| } |
| |
| am, ok := mctx.Module().(android.ApexModule) |
| if !ok { |
| return |
| } |
| |
| availableToPlatform := am.AvailableFor(android.AvailableToPlatform) |
| |
| // If any of the dep is not available to platform, this module is also considered as being |
| // not available to platform even if it has "//apex_available:platform" |
| mctx.VisitDirectDeps(func(child android.Module) { |
| if !android.IsDepInSameApex(mctx, am, child) { |
| // if the dependency crosses apex boundary, don't consider it |
| return |
| } |
| if dep, ok := child.(android.ApexModule); ok && dep.NotAvailableForPlatform() { |
| availableToPlatform = false |
| // TODO(b/154889534) trigger an error when 'am' has |
| // "//apex_available:platform" |
| } |
| }) |
| |
| // Exception 1: check to see if the module always requires it. |
| if am.AlwaysRequiresPlatformApexVariant() { |
| availableToPlatform = true |
| } |
| |
| // Exception 2: bootstrap bionic libraries are also always available to platform |
| if cc.InstallToBootstrap(mctx.ModuleName(), mctx.Config()) { |
| availableToPlatform = true |
| } |
| |
| if !availableToPlatform { |
| am.SetNotAvailableForPlatform() |
| } |
| } |
| |
| // apexMutator visits each module and creates apex variations if the module was marked in the |
| // previous run of apexInfoMutator. |
| func apexMutator(mctx android.BottomUpMutatorContext) { |
| if !mctx.Module().Enabled() { |
| return |
| } |
| |
| // This is the usual path. |
| if am, ok := mctx.Module().(android.ApexModule); ok && am.CanHaveApexVariants() { |
| android.CreateApexVariations(mctx, am) |
| return |
| } |
| |
| // apexBundle itself is mutated so that it and its dependencies have the same apex variant. |
| if ai, ok := mctx.Module().(ApexInfoMutator); ok && apexModuleTypeRequiresVariant(ai) { |
| apexBundleName := ai.ApexVariationName() |
| mctx.CreateVariations(apexBundleName) |
| if strings.HasPrefix(apexBundleName, "com.android.art") { |
| // Create an alias from the platform variant. This is done to make |
| // test_for dependencies work for modules that are split by the APEX |
| // mutator, since test_for dependencies always go to the platform variant. |
| // This doesn't happen for normal APEXes that are disjunct, so only do |
| // this for the overlapping ART APEXes. |
| // TODO(b/183882457): Remove this if the test_for functionality is |
| // refactored to depend on the proper APEX variants instead of platform. |
| mctx.CreateAliasVariation("", apexBundleName) |
| } |
| } else if o, ok := mctx.Module().(*OverrideApex); ok { |
| apexBundleName := o.GetOverriddenModuleName() |
| if apexBundleName == "" { |
| mctx.ModuleErrorf("base property is not set") |
| return |
| } |
| mctx.CreateVariations(apexBundleName) |
| if strings.HasPrefix(apexBundleName, "com.android.art") { |
| // TODO(b/183882457): See note for CreateAliasVariation above. |
| mctx.CreateAliasVariation("", apexBundleName) |
| } |
| } |
| } |
| |
| // apexModuleTypeRequiresVariant determines whether the module supplied requires an apex specific |
| // variant. |
| func apexModuleTypeRequiresVariant(module ApexInfoMutator) bool { |
| if a, ok := module.(*apexBundle); ok { |
| // TODO(jiyong): document the reason why the VNDK APEX is an exception here. |
| return !a.vndkApex |
| } |
| |
| return true |
| } |
| |
| // See android.UpdateDirectlyInAnyApex |
| // TODO(jiyong): move this to android/apex.go? |
| func apexDirectlyInAnyMutator(mctx android.BottomUpMutatorContext) { |
| if !mctx.Module().Enabled() { |
| return |
| } |
| if am, ok := mctx.Module().(android.ApexModule); ok { |
| android.UpdateDirectlyInAnyApex(mctx, am) |
| } |
| } |
| |
| const ( |
| // File extensions of an APEX for different packaging methods |
| imageApexSuffix = ".apex" |
| imageCapexSuffix = ".capex" |
| |
| // variant names each of which is for a packaging method |
| imageApexType = "image" |
| |
| ext4FsType = "ext4" |
| f2fsFsType = "f2fs" |
| erofsFsType = "erofs" |
| ) |
| |
| var _ android.DepIsInSameApex = (*apexBundle)(nil) |
| |
| // Implements android.DepInInSameApex |
| func (a *apexBundle) DepIsInSameApex(_ android.BaseModuleContext, _ android.Module) bool { |
| // direct deps of an APEX bundle are all part of the APEX bundle |
| // TODO(jiyong): shouldn't we look into the payload field of the dependencyTag? |
| return true |
| } |
| |
| var _ android.OutputFileProducer = (*apexBundle)(nil) |
| |
| // Implements android.OutputFileProducer |
| func (a *apexBundle) OutputFiles(tag string) (android.Paths, error) { |
| switch tag { |
| case "", android.DefaultDistTag: |
| // This is the default dist path. |
| return android.Paths{a.outputFile}, nil |
| case imageApexSuffix: |
| // uncompressed one |
| if a.outputApexFile != nil { |
| return android.Paths{a.outputApexFile}, nil |
| } |
| fallthrough |
| default: |
| return nil, fmt.Errorf("unsupported module reference tag %q", tag) |
| } |
| } |
| |
| var _ multitree.Exportable = (*apexBundle)(nil) |
| |
| func (a *apexBundle) Exportable() bool { |
| return true |
| } |
| |
| func (a *apexBundle) TaggedOutputs() map[string]android.Paths { |
| ret := make(map[string]android.Paths) |
| ret["apex"] = android.Paths{a.outputFile} |
| return ret |
| } |
| |
| var _ cc.Coverage = (*apexBundle)(nil) |
| |
| // Implements cc.Coverage |
| func (a *apexBundle) IsNativeCoverageNeeded(ctx android.BaseModuleContext) bool { |
| return ctx.DeviceConfig().NativeCoverageEnabled() |
| } |
| |
| // Implements cc.Coverage |
| func (a *apexBundle) SetPreventInstall() { |
| a.properties.PreventInstall = true |
| } |
| |
| // Implements cc.Coverage |
| func (a *apexBundle) HideFromMake() { |
| a.properties.HideFromMake = true |
| // This HideFromMake is shadowing the ModuleBase one, call through to it for now. |
| // TODO(ccross): untangle these |
| a.ModuleBase.HideFromMake() |
| } |
| |
| // Implements cc.Coverage |
| func (a *apexBundle) MarkAsCoverageVariant(coverage bool) { |
| a.properties.IsCoverageVariant = coverage |
| } |
| |
| // Implements cc.Coverage |
| func (a *apexBundle) EnableCoverageIfNeeded() {} |
| |
| var _ android.ApexBundleDepsInfoIntf = (*apexBundle)(nil) |
| |
| // Implements android.ApexBundleDepsInfoIntf |
| func (a *apexBundle) Updatable() bool { |
| return proptools.BoolDefault(a.properties.Updatable, true) |
| } |
| |
| func (a *apexBundle) FutureUpdatable() bool { |
| return proptools.BoolDefault(a.properties.Future_updatable, false) |
| } |
| |
| func (a *apexBundle) UsePlatformApis() bool { |
| return proptools.BoolDefault(a.properties.Platform_apis, false) |
| } |
| |
| // getCertString returns the name of the cert that should be used to sign this APEX. This is |
| // basically from the "certificate" property, but could be overridden by the device config. |
| func (a *apexBundle) getCertString(ctx android.BaseModuleContext) string { |
| moduleName := ctx.ModuleName() |
| // VNDK APEXes share the same certificate. To avoid adding a new VNDK version to the |
| // OVERRIDE_* list, we check with the pseudo module name to see if its certificate is |
| // overridden. |
| if a.vndkApex { |
| moduleName = vndkApexName |
| } |
| certificate, overridden := ctx.DeviceConfig().OverrideCertificateFor(moduleName) |
| if overridden { |
| return ":" + certificate |
| } |
| return String(a.overridableProperties.Certificate) |
| } |
| |
| // See the installable property |
| func (a *apexBundle) installable() bool { |
| return !a.properties.PreventInstall && (a.properties.Installable == nil || proptools.Bool(a.properties.Installable)) |
| } |
| |
| // See the generate_hashtree property |
| func (a *apexBundle) shouldGenerateHashtree() bool { |
| return proptools.BoolDefault(a.properties.Generate_hashtree, true) |
| } |
| |
| // See the test_only_unsigned_payload property |
| func (a *apexBundle) testOnlyShouldSkipPayloadSign() bool { |
| return proptools.Bool(a.properties.Test_only_unsigned_payload) |
| } |
| |
| // See the test_only_force_compression property |
| func (a *apexBundle) testOnlyShouldForceCompression() bool { |
| return proptools.Bool(a.properties.Test_only_force_compression) |
| } |
| |
| // See the dynamic_common_lib_apex property |
| func (a *apexBundle) dynamic_common_lib_apex() bool { |
| return proptools.BoolDefault(a.properties.Dynamic_common_lib_apex, false) |
| } |
| |
| // See the list of libs to trim |
| func (a *apexBundle) libs_to_trim(ctx android.ModuleContext) []string { |
| dclaModules := ctx.GetDirectDepsWithTag(dclaTag) |
| if len(dclaModules) > 1 { |
| panic(fmt.Errorf("expected exactly at most one dcla dependency, got %d", len(dclaModules))) |
| } |
| if len(dclaModules) > 0 { |
| DCLAInfo := ctx.OtherModuleProvider(dclaModules[0], DCLAInfoProvider).(DCLAInfo) |
| return DCLAInfo.ProvidedLibs |
| } |
| return []string{} |
| } |
| |
| // These functions are interfacing with cc/sanitizer.go. The entire APEX (along with all of its |
| // members) can be sanitized, either forcibly, or by the global configuration. For some of the |
| // sanitizers, extra dependencies can be forcibly added as well. |
| |
| func (a *apexBundle) EnableSanitizer(sanitizerName string) { |
| if !android.InList(sanitizerName, a.properties.SanitizerNames) { |
| a.properties.SanitizerNames = append(a.properties.SanitizerNames, sanitizerName) |
| } |
| } |
| |
| func (a *apexBundle) IsSanitizerEnabled(config android.Config, sanitizerName string) bool { |
| if android.InList(sanitizerName, a.properties.SanitizerNames) { |
| return true |
| } |
| |
| // Then follow the global setting |
| var globalSanitizerNames []string |
| arches := config.SanitizeDeviceArch() |
| if len(arches) == 0 || android.InList(a.Arch().ArchType.Name, arches) { |
| globalSanitizerNames = config.SanitizeDevice() |
| } |
| return android.InList(sanitizerName, globalSanitizerNames) |
| } |
| |
| func (a *apexBundle) AddSanitizerDependencies(ctx android.BottomUpMutatorContext, sanitizerName string) { |
| // TODO(jiyong): move this info (the sanitizer name, the lib name, etc.) to cc/sanitize.go |
| // Keep only the mechanism here. |
| if sanitizerName == "hwaddress" && strings.HasPrefix(a.Name(), "com.android.runtime") { |
| imageVariation := a.getImageVariation(ctx) |
| for _, target := range ctx.MultiTargets() { |
| if target.Arch.ArchType.Multilib == "lib64" { |
| addDependenciesForNativeModules(ctx, ApexNativeDependencies{ |
| Native_shared_libs: []string{"libclang_rt.hwasan"}, |
| Tests: nil, |
| Jni_libs: nil, |
| Binaries: nil, |
| }, target, imageVariation) |
| break |
| } |
| } |
| } |
| } |
| |
| // apexFileFor<Type> functions below create an apexFile struct for a given Soong module. The |
| // returned apexFile saves information about the Soong module that will be used for creating the |
| // build rules. |
| func apexFileForNativeLibrary(ctx android.BaseModuleContext, ccMod *cc.Module, handleSpecialLibs bool) apexFile { |
| // Decide the APEX-local directory by the multilib of the library In the future, we may |
| // query this to the module. |
| // TODO(jiyong): use the new PackagingSpec |
| var dirInApex string |
| switch ccMod.Arch().ArchType.Multilib { |
| case "lib32": |
| dirInApex = "lib" |
| case "lib64": |
| dirInApex = "lib64" |
| } |
| if ccMod.Target().NativeBridge == android.NativeBridgeEnabled { |
| dirInApex = filepath.Join(dirInApex, ccMod.Target().NativeBridgeRelativePath) |
| } |
| if handleSpecialLibs && cc.InstallToBootstrap(ccMod.BaseModuleName(), ctx.Config()) { |
| // Special case for Bionic libs and other libs installed with them. This is to |
| // prevent those libs from being included in the search path |
| // /apex/com.android.runtime/${LIB}. This exclusion is required because those libs |
| // in the Runtime APEX are available via the legacy paths in /system/lib/. By the |
| // init process, the libs in the APEX are bind-mounted to the legacy paths and thus |
| // will be loaded into the default linker namespace (aka "platform" namespace). If |
| // the libs are directly in /apex/com.android.runtime/${LIB} then the same libs will |
| // be loaded again into the runtime linker namespace, which will result in double |
| // loading of them, which isn't supported. |
| dirInApex = filepath.Join(dirInApex, "bionic") |
| } |
| // This needs to go after the runtime APEX handling because otherwise we would get |
| // weird paths like lib64/rel_install_path/bionic rather than |
| // lib64/bionic/rel_install_path. |
| dirInApex = filepath.Join(dirInApex, ccMod.RelativeInstallPath()) |
| |
| fileToCopy := android.OutputFileForModule(ctx, ccMod, "") |
| androidMkModuleName := ccMod.BaseModuleName() + ccMod.Properties.SubName |
| return newApexFile(ctx, fileToCopy, androidMkModuleName, dirInApex, nativeSharedLib, ccMod) |
| } |
| |
| func apexFileForExecutable(ctx android.BaseModuleContext, cc *cc.Module) apexFile { |
| dirInApex := "bin" |
| if cc.Target().NativeBridge == android.NativeBridgeEnabled { |
| dirInApex = filepath.Join(dirInApex, cc.Target().NativeBridgeRelativePath) |
| } |
| dirInApex = filepath.Join(dirInApex, cc.RelativeInstallPath()) |
| fileToCopy := android.OutputFileForModule(ctx, cc, "") |
| androidMkModuleName := cc.BaseModuleName() + cc.Properties.SubName |
| af := newApexFile(ctx, fileToCopy, androidMkModuleName, dirInApex, nativeExecutable, cc) |
| af.symlinks = cc.Symlinks() |
| af.dataPaths = cc.DataPaths() |
| return af |
| } |
| |
| func apexFileForRustExecutable(ctx android.BaseModuleContext, rustm *rust.Module) apexFile { |
| dirInApex := "bin" |
| if rustm.Target().NativeBridge == android.NativeBridgeEnabled { |
| dirInApex = filepath.Join(dirInApex, rustm.Target().NativeBridgeRelativePath) |
| } |
| dirInApex = filepath.Join(dirInApex, rustm.RelativeInstallPath()) |
| fileToCopy := android.OutputFileForModule(ctx, rustm, "") |
| androidMkModuleName := rustm.BaseModuleName() + rustm.Properties.SubName |
| af := newApexFile(ctx, fileToCopy, androidMkModuleName, dirInApex, nativeExecutable, rustm) |
| return af |
| } |
| |
| func apexFileForRustLibrary(ctx android.BaseModuleContext, rustm *rust.Module) apexFile { |
| // Decide the APEX-local directory by the multilib of the library |
| // In the future, we may query this to the module. |
| var dirInApex string |
| switch rustm.Arch().ArchType.Multilib { |
| case "lib32": |
| dirInApex = "lib" |
| case "lib64": |
| dirInApex = "lib64" |
| } |
| if rustm.Target().NativeBridge == android.NativeBridgeEnabled { |
| dirInApex = filepath.Join(dirInApex, rustm.Target().NativeBridgeRelativePath) |
| } |
| dirInApex = filepath.Join(dirInApex, rustm.RelativeInstallPath()) |
| fileToCopy := android.OutputFileForModule(ctx, rustm, "") |
| androidMkModuleName := rustm.BaseModuleName() + rustm.Properties.SubName |
| return newApexFile(ctx, fileToCopy, androidMkModuleName, dirInApex, nativeSharedLib, rustm) |
| } |
| |
| func apexFileForShBinary(ctx android.BaseModuleContext, sh *sh.ShBinary) apexFile { |
| dirInApex := filepath.Join("bin", sh.SubDir()) |
| if sh.Target().NativeBridge == android.NativeBridgeEnabled { |
| dirInApex = filepath.Join(dirInApex, sh.Target().NativeBridgeRelativePath) |
| } |
| fileToCopy := sh.OutputFile() |
| af := newApexFile(ctx, fileToCopy, sh.BaseModuleName(), dirInApex, shBinary, sh) |
| af.symlinks = sh.Symlinks() |
| return af |
| } |
| |
| func apexFileForPrebuiltEtc(ctx android.BaseModuleContext, prebuilt prebuilt_etc.PrebuiltEtcModule, depName string) apexFile { |
| dirInApex := filepath.Join(prebuilt.BaseDir(), prebuilt.SubDir()) |
| fileToCopy := prebuilt.OutputFile() |
| return newApexFile(ctx, fileToCopy, depName, dirInApex, etc, prebuilt) |
| } |
| |
| func apexFileForCompatConfig(ctx android.BaseModuleContext, config java.PlatformCompatConfigIntf, depName string) apexFile { |
| dirInApex := filepath.Join("etc", config.SubDir()) |
| fileToCopy := config.CompatConfig() |
| return newApexFile(ctx, fileToCopy, depName, dirInApex, etc, config) |
| } |
| |
| // javaModule is an interface to handle all Java modules (java_library, dex_import, etc) in the same |
| // way. |
| type javaModule interface { |
| android.Module |
| BaseModuleName() string |
| DexJarBuildPath() java.OptionalDexJarPath |
| JacocoReportClassesFile() android.Path |
| LintDepSets() java.LintDepSets |
| Stem() string |
| } |
| |
| var _ javaModule = (*java.Library)(nil) |
| var _ javaModule = (*java.Import)(nil) |
| var _ javaModule = (*java.SdkLibrary)(nil) |
| var _ javaModule = (*java.DexImport)(nil) |
| var _ javaModule = (*java.SdkLibraryImport)(nil) |
| |
| // apexFileForJavaModule creates an apexFile for a java module's dex implementation jar. |
| func apexFileForJavaModule(ctx android.BaseModuleContext, module javaModule) apexFile { |
| return apexFileForJavaModuleWithFile(ctx, module, module.DexJarBuildPath().PathOrNil()) |
| } |
| |
| // apexFileForJavaModuleWithFile creates an apexFile for a java module with the supplied file. |
| func apexFileForJavaModuleWithFile(ctx android.BaseModuleContext, module javaModule, dexImplementationJar android.Path) apexFile { |
| dirInApex := "javalib" |
| af := newApexFile(ctx, dexImplementationJar, module.BaseModuleName(), dirInApex, javaSharedLib, module) |
| af.jacocoReportClassesFile = module.JacocoReportClassesFile() |
| af.lintDepSets = module.LintDepSets() |
| af.customStem = module.Stem() + ".jar" |
| if dexpreopter, ok := module.(java.DexpreopterInterface); ok { |
| for _, install := range dexpreopter.DexpreoptBuiltInstalledForApex() { |
| af.requiredModuleNames = append(af.requiredModuleNames, install.FullModuleName()) |
| } |
| } |
| return af |
| } |
| |
| func apexFileForJavaModuleProfile(ctx android.BaseModuleContext, module javaModule) *apexFile { |
| if dexpreopter, ok := module.(java.DexpreopterInterface); ok { |
| if profilePathOnHost := dexpreopter.OutputProfilePathOnHost(); profilePathOnHost != nil { |
| dirInApex := "javalib" |
| af := newApexFile(ctx, profilePathOnHost, module.BaseModuleName()+"-profile", dirInApex, etc, nil) |
| af.customStem = module.Stem() + ".jar.prof" |
| return &af |
| } |
| } |
| return nil |
| } |
| |
| // androidApp is an interface to handle all app modules (android_app, android_app_import, etc.) in |
| // the same way. |
| type androidApp interface { |
| android.Module |
| Privileged() bool |
| InstallApkName() string |
| OutputFile() android.Path |
| JacocoReportClassesFile() android.Path |
| Certificate() java.Certificate |
| BaseModuleName() string |
| LintDepSets() java.LintDepSets |
| PrivAppAllowlist() android.OptionalPath |
| } |
| |
| var _ androidApp = (*java.AndroidApp)(nil) |
| var _ androidApp = (*java.AndroidAppImport)(nil) |
| |
| func sanitizedBuildIdForPath(ctx android.BaseModuleContext) string { |
| buildId := ctx.Config().BuildId() |
| |
| // The build ID is used as a suffix for a filename, so ensure that |
| // the set of characters being used are sanitized. |
| // - any word character: [a-zA-Z0-9_] |
| // - dots: . |
| // - dashes: - |
| validRegex := regexp.MustCompile(`^[\w\.\-\_]+$`) |
| if !validRegex.MatchString(buildId) { |
| ctx.ModuleErrorf("Unable to use build id %s as filename suffix, valid characters are [a-z A-Z 0-9 _ . -].", buildId) |
| } |
| return buildId |
| } |
| |
| func apexFilesForAndroidApp(ctx android.BaseModuleContext, aapp androidApp) []apexFile { |
| appDir := "app" |
| if aapp.Privileged() { |
| appDir = "priv-app" |
| } |
| |
| // TODO(b/224589412, b/226559955): Ensure that the subdirname is suffixed |
| // so that PackageManager correctly invalidates the existing installed apk |
| // in favour of the new APK-in-APEX. See bugs for more information. |
| dirInApex := filepath.Join(appDir, aapp.InstallApkName()+"@"+sanitizedBuildIdForPath(ctx)) |
| fileToCopy := aapp.OutputFile() |
| |
| af := newApexFile(ctx, fileToCopy, aapp.BaseModuleName(), dirInApex, app, aapp) |
| af.jacocoReportClassesFile = aapp.JacocoReportClassesFile() |
| af.lintDepSets = aapp.LintDepSets() |
| af.certificate = aapp.Certificate() |
| |
| if app, ok := aapp.(interface { |
| OverriddenManifestPackageName() string |
| }); ok { |
| af.overriddenPackageName = app.OverriddenManifestPackageName() |
| } |
| |
| apexFiles := []apexFile{} |
| |
| if allowlist := aapp.PrivAppAllowlist(); allowlist.Valid() { |
| dirInApex := filepath.Join("etc", "permissions") |
| privAppAllowlist := newApexFile(ctx, allowlist.Path(), aapp.BaseModuleName()+"_privapp", dirInApex, etc, aapp) |
| apexFiles = append(apexFiles, privAppAllowlist) |
| } |
| |
| apexFiles = append(apexFiles, af) |
| |
| return apexFiles |
| } |
| |
| func apexFileForRuntimeResourceOverlay(ctx android.BaseModuleContext, rro java.RuntimeResourceOverlayModule) apexFile { |
| rroDir := "overlay" |
| dirInApex := filepath.Join(rroDir, rro.Theme()) |
| fileToCopy := rro.OutputFile() |
| af := newApexFile(ctx, fileToCopy, rro.Name(), dirInApex, app, rro) |
| af.certificate = rro.Certificate() |
| |
| if a, ok := rro.(interface { |
| OverriddenManifestPackageName() string |
| }); ok { |
| af.overriddenPackageName = a.OverriddenManifestPackageName() |
| } |
| return af |
| } |
| |
| func apexFileForBpfProgram(ctx android.BaseModuleContext, builtFile android.Path, apex_sub_dir string, bpfProgram bpf.BpfModule) apexFile { |
| dirInApex := filepath.Join("etc", "bpf", apex_sub_dir) |
| return newApexFile(ctx, builtFile, builtFile.Base(), dirInApex, etc, bpfProgram) |
| } |
| |
| func apexFileForFilesystem(ctx android.BaseModuleContext, buildFile android.Path, fs filesystem.Filesystem) apexFile { |
| dirInApex := filepath.Join("etc", "fs") |
| return newApexFile(ctx, buildFile, buildFile.Base(), dirInApex, etc, fs) |
| } |
| |
| // WalkPayloadDeps visits dependencies that contributes to the payload of this APEX. For each of the |
| // visited module, the `do` callback is executed. Returning true in the callback continues the visit |
| // to the child modules. Returning false makes the visit to continue in the sibling or the parent |
| // modules. This is used in check* functions below. |
| func (a *apexBundle) WalkPayloadDeps(ctx android.ModuleContext, do android.PayloadDepsCallback) { |
| ctx.WalkDeps(func(child, parent android.Module) bool { |
| am, ok := child.(android.ApexModule) |
| if !ok || !am.CanHaveApexVariants() { |
| return false |
| } |
| |
| // Filter-out unwanted depedendencies |
| depTag := ctx.OtherModuleDependencyTag(child) |
| if _, ok := depTag.(android.ExcludeFromApexContentsTag); ok { |
| return false |
| } |
| if dt, ok := depTag.(*dependencyTag); ok && !dt.payload { |
| return false |
| } |
| |
| ai := ctx.OtherModuleProvider(child, android.ApexInfoProvider).(android.ApexInfo) |
| externalDep := !android.InList(ctx.ModuleName(), ai.InApexVariants) |
| |
| // Visit actually |
| return do(ctx, parent, am, externalDep) |
| }) |
| } |
| |
| // filesystem type of the apex_payload.img inside the APEX. Currently, ext4 and f2fs are supported. |
| type fsType int |
| |
| const ( |
| ext4 fsType = iota |
| f2fs |
| erofs |
| ) |
| |
| func (f fsType) string() string { |
| switch f { |
| case ext4: |
| return ext4FsType |
| case f2fs: |
| return f2fsFsType |
| case erofs: |
| return erofsFsType |
| default: |
| panic(fmt.Errorf("unknown APEX payload type %d", f)) |
| } |
| } |
| |
| var _ android.MixedBuildBuildable = (*apexBundle)(nil) |
| |
| func (a *apexBundle) IsMixedBuildSupported(ctx android.BaseModuleContext) bool { |
| return true |
| } |
| |
| func (a *apexBundle) QueueBazelCall(ctx android.BaseModuleContext) { |
| bazelCtx := ctx.Config().BazelContext |
| bazelCtx.QueueBazelRequest(a.GetBazelLabel(ctx, a), cquery.GetApexInfo, android.GetConfigKey(ctx)) |
| } |
| |
| // GetBazelLabel returns the bazel label of this apexBundle, or the label of the |
| // override_apex module overriding this apexBundle. An apexBundle can be |
| // overridden by different override_apex modules (e.g. Google or Go variants), |
| // which is handled by the overrides mutators. |
| func (a *apexBundle) GetBazelLabel(ctx android.BazelConversionPathContext, module blueprint.Module) string { |
| return a.BazelModuleBase.GetBazelLabel(ctx, a) |
| } |
| |
| func (a *apexBundle) ProcessBazelQueryResponse(ctx android.ModuleContext) { |
| if !a.commonBuildActions(ctx) { |
| return |
| } |
| |
| a.setPayloadFsType(ctx) |
| a.setSystemLibLink(ctx) |
| a.compatSymlinks = makeCompatSymlinks(a.BaseModuleName(), ctx) |
| |
| bazelCtx := ctx.Config().BazelContext |
| outputs, err := bazelCtx.GetApexInfo(a.GetBazelLabel(ctx, a), android.GetConfigKey(ctx)) |
| if err != nil { |
| ctx.ModuleErrorf(err.Error()) |
| return |
| } |
| a.installDir = android.PathForModuleInstall(ctx, "apex") |
| |
| // Set the output file to .apex or .capex depending on the compression configuration. |
| a.setCompression(ctx) |
| if a.isCompressed { |
| a.outputApexFile = android.PathForBazelOutRelative(ctx, ctx.ModuleDir(), outputs.SignedCompressedOutput) |
| } else { |
| a.outputApexFile = android.PathForBazelOutRelative(ctx, ctx.ModuleDir(), outputs.SignedOutput) |
| } |
| a.outputFile = a.outputApexFile |
| |
| if len(outputs.TidyFiles) > 0 { |
| tidyFiles := android.PathsForBazelOut(ctx, outputs.TidyFiles) |
| a.outputFile = android.AttachValidationActions(ctx, a.outputFile, tidyFiles) |
| } |
| |
| // TODO(b/257829940): These are used by the apex_keys_text singleton; would probably be a clearer |
| // interface if these were set in a provider rather than the module itself |
| a.publicKeyFile = android.PathForBazelOut(ctx, outputs.BundleKeyInfo[0]) |
| a.privateKeyFile = android.PathForBazelOut(ctx, outputs.BundleKeyInfo[1]) |
| a.containerCertificateFile = android.PathForBazelOut(ctx, outputs.ContainerKeyInfo[0]) |
| a.containerPrivateKeyFile = android.PathForBazelOut(ctx, outputs.ContainerKeyInfo[1]) |
| |
| // Ensure ApexMkInfo.install_to_system make module names are installed as |
| // part of a bundled build. |
| a.makeModulesToInstall = append(a.makeModulesToInstall, outputs.MakeModulesToInstall...) |
| |
| a.bundleModuleFile = android.PathForBazelOut(ctx, outputs.BundleFile) |
| a.nativeApisUsedByModuleFile = android.ModuleOutPath(android.PathForBazelOut(ctx, outputs.SymbolsUsedByApex)) |
| a.nativeApisBackedByModuleFile = android.ModuleOutPath(android.PathForBazelOut(ctx, outputs.BackingLibs)) |
| // TODO(b/239084755): Generate the java api using.xml file from Bazel. |
| a.javaApisUsedByModuleFile = android.ModuleOutPath(android.PathForBazelOut(ctx, outputs.JavaSymbolsUsedByApex)) |
| a.installedFilesFile = android.ModuleOutPath(android.PathForBazelOut(ctx, outputs.InstalledFiles)) |
| installSuffix := imageApexSuffix |
| if a.isCompressed { |
| installSuffix = imageCapexSuffix |
| } |
| a.installedFile = ctx.InstallFile(a.installDir, a.Name()+installSuffix, a.outputFile, |
| a.compatSymlinks.Paths()...) |
| |
| // filesInfo in mixed mode must retrieve all information about the apex's |
| // contents completely from the Starlark providers. It should never rely on |
| // Android.bp information, as they might not exist for fully migrated |
| // dependencies. |
| // |
| // Prevent accidental writes to filesInfo in the earlier parts Soong by |
| // asserting it to be nil. |
| if a.filesInfo != nil { |
| panic( |
| fmt.Errorf("internal error: filesInfo must be nil for an apex handled by Bazel. " + |
| "Did something else set filesInfo before this line of code?")) |
| } |
| for _, f := range outputs.PayloadFilesInfo { |
| fileInfo := apexFile{ |
| isBazelPrebuilt: true, |
| |
| builtFile: android.PathForBazelOut(ctx, f["built_file"]), |
| unstrippedBuiltFile: android.PathForBazelOut(ctx, f["unstripped_built_file"]), |
| androidMkModuleName: f["make_module_name"], |
| installDir: f["install_dir"], |
| class: classes[f["class"]], |
| customStem: f["basename"], |
| moduleDir: f["package"], |
| } |
| |
| arch := f["arch"] |
| fileInfo.arch = arch |
| if len(arch) > 0 { |
| fileInfo.multilib = "lib32" |
| if strings.HasSuffix(arch, "64") { |
| fileInfo.multilib = "lib64" |
| } |
| } |
| |
| a.filesInfo = append(a.filesInfo, fileInfo) |
| } |
| } |
| |
| func (a *apexBundle) setCompression(ctx android.ModuleContext) { |
| if a.testOnlyShouldForceCompression() { |
| a.isCompressed = true |
| } else { |
| a.isCompressed = ctx.Config().ApexCompressionEnabled() && a.isCompressable() |
| } |
| } |
| |
| func (a *apexBundle) setSystemLibLink(ctx android.ModuleContext) { |
| // Optimization. If we are building bundled APEX, for the files that are gathered due to the |
| // transitive dependencies, don't place them inside the APEX, but place a symlink pointing |
| // the same library in the system partition, thus effectively sharing the same libraries |
| // across the APEX boundary. For unbundled APEX, all the gathered files are actually placed |
| // in the APEX. |
| a.linkToSystemLib = !ctx.Config().UnbundledBuild() && a.installable() |
| |
| // APEXes targeting other than system/system_ext partitions use vendor/product variants. |
| // So we can't link them to /system/lib libs which are core variants. |
| if a.SocSpecific() || a.DeviceSpecific() || (a.ProductSpecific() && ctx.Config().EnforceProductPartitionInterface()) { |
| a.linkToSystemLib = false |
| } |
| |
| forced := ctx.Config().ForceApexSymlinkOptimization() |
| updatable := a.Updatable() || a.FutureUpdatable() |
| |
| // We don't need the optimization for updatable APEXes, as it might give false signal |
| // to the system health when the APEXes are still bundled (b/149805758). |
| if !forced && updatable { |
| a.linkToSystemLib = false |
| } |
| } |
| |
| func (a *apexBundle) setPayloadFsType(ctx android.ModuleContext) { |
| switch proptools.StringDefault(a.properties.Payload_fs_type, ext4FsType) { |
| case ext4FsType: |
| a.payloadFsType = ext4 |
| case f2fsFsType: |
| a.payloadFsType = f2fs |
| case erofsFsType: |
| a.payloadFsType = erofs |
| default: |
| ctx.PropertyErrorf("payload_fs_type", "%q is not a valid filesystem for apex [ext4, f2fs, erofs]", *a.properties.Payload_fs_type) |
| } |
| } |
| |
| func (a *apexBundle) isCompressable() bool { |
| return proptools.BoolDefault(a.overridableProperties.Compressible, false) && !a.testApex |
| } |
| |
| func (a *apexBundle) commonBuildActions(ctx android.ModuleContext) bool { |
| a.checkApexAvailability(ctx) |
| a.checkUpdatable(ctx) |
| a.CheckMinSdkVersion(ctx) |
| a.checkStaticLinkingToStubLibraries(ctx) |
| a.checkStaticExecutables(ctx) |
| if len(a.properties.Tests) > 0 && !a.testApex { |
| ctx.PropertyErrorf("tests", "property allowed only in apex_test module type") |
| return false |
| } |
| return true |
| } |
| |
| type visitorContext struct { |
| // all the files that will be included in this APEX |
| filesInfo []apexFile |
| |
| // native lib dependencies |
| provideNativeLibs []string |
| requireNativeLibs []string |
| |
| handleSpecialLibs bool |
| |
| // if true, raise error on duplicate apexFile |
| checkDuplicate bool |
| } |
| |
| func (vctx *visitorContext) normalizeFileInfo(mctx android.ModuleContext) { |
| encountered := make(map[string]apexFile) |
| for _, f := range vctx.filesInfo { |
| dest := filepath.Join(f.installDir, f.builtFile.Base()) |
| if e, ok := encountered[dest]; !ok { |
| encountered[dest] = f |
| } else { |
| if vctx.checkDuplicate && f.builtFile.String() != e.builtFile.String() { |
| mctx.ModuleErrorf("apex file %v is provided by two different files %v and %v", |
| dest, e.builtFile, f.builtFile) |
| return |
| } |
| // If a module is directly included and also transitively depended on |
| // consider it as directly included. |
| e.transitiveDep = e.transitiveDep && f.transitiveDep |
| encountered[dest] = e |
| } |
| } |
| vctx.filesInfo = vctx.filesInfo[:0] |
| for _, v := range encountered { |
| vctx.filesInfo = append(vctx.filesInfo, v) |
| } |
| sort.Slice(vctx.filesInfo, func(i, j int) bool { |
| // Sort by destination path so as to ensure consistent ordering even if the source of the files |
| // changes. |
| return vctx.filesInfo[i].path() < vctx.filesInfo[j].path() |
| }) |
| } |
| |
| func (a *apexBundle) depVisitor(vctx *visitorContext, ctx android.ModuleContext, child, parent blueprint.Module) bool { |
| depTag := ctx.OtherModuleDependencyTag(child) |
| if _, ok := depTag.(android.ExcludeFromApexContentsTag); ok { |
| return false |
| } |
| if mod, ok := child.(android.Module); ok && !mod.Enabled() { |
| return false |
| } |
| depName := ctx.OtherModuleName(child) |
| if _, isDirectDep := parent.(*apexBundle); isDirectDep { |
| switch depTag { |
| case sharedLibTag, jniLibTag: |
| isJniLib := depTag == jniLibTag |
| switch ch := child.(type) { |
| case *cc.Module: |
| fi := apexFileForNativeLibrary(ctx, ch, vctx.handleSpecialLibs) |
| fi.isJniLib = isJniLib |
| vctx.filesInfo = append(vctx.filesInfo, fi) |
| // Collect the list of stub-providing libs except: |
| // - VNDK libs are only for vendors |
| // - bootstrap bionic libs are treated as provided by system |
| if ch.HasStubsVariants() && !a.vndkApex && !cc.InstallToBootstrap(ch.BaseModuleName(), ctx.Config()) { |
| vctx.provideNativeLibs = append(vctx.provideNativeLibs, fi.stem()) |
| } |
| return true // track transitive dependencies |
| case *rust.Module: |
| fi := apexFileForRustLibrary(ctx, ch) |
| fi.isJniLib = isJniLib |
| vctx.filesInfo = append(vctx.filesInfo, fi) |
| return true // track transitive dependencies |
| default: |
| propertyName := "native_shared_libs" |
| if isJniLib { |
| propertyName = "jni_libs" |
| } |
| ctx.PropertyErrorf(propertyName, "%q is not a cc_library or cc_library_shared module", depName) |
| } |
| case executableTag: |
| switch ch := child.(type) { |
| case *cc.Module: |
| vctx.filesInfo = append(vctx.filesInfo, apexFileForExecutable(ctx, ch)) |
| return true // track transitive dependencies |
| case *rust.Module: |
| vctx.filesInfo = append(vctx.filesInfo, apexFileForRustExecutable(ctx, ch)) |
| return true // track transitive dependencies |
| default: |
| ctx.PropertyErrorf("binaries", |
| "%q is neither cc_binary, rust_binary, (embedded) py_binary, (host) blueprint_go_binary, nor (host) bootstrap_go_binary", depName) |
| } |
| case shBinaryTag: |
| if csh, ok := child.(*sh.ShBinary); ok { |
| vctx.filesInfo = append(vctx.filesInfo, apexFileForShBinary(ctx, csh)) |
| } else { |
| ctx.PropertyErrorf("sh_binaries", "%q is not a sh_binary module", depName) |
| } |
| case bcpfTag: |
| _, ok := child.(*java.BootclasspathFragmentModule) |
| if !ok { |
| ctx.PropertyErrorf("bootclasspath_fragments", "%q is not a bootclasspath_fragment module", depName) |
| return false |
| } |
| |
| vctx.filesInfo = append(vctx.filesInfo, apexBootclasspathFragmentFiles(ctx, child)...) |
| return true |
| case sscpfTag: |
| if _, ok := child.(*java.SystemServerClasspathModule); !ok { |
| ctx.PropertyErrorf("systemserverclasspath_fragments", |
| "%q is not a systemserverclasspath_fragment module", depName) |
| return false |
| } |
| if af := apexClasspathFragmentProtoFile(ctx, child); af != nil { |
| vctx.filesInfo = append(vctx.filesInfo, *af) |
| } |
| return true |
| case javaLibTag: |
| switch child.(type) { |
| case *java.Library, *java.SdkLibrary, *java.DexImport, *java.SdkLibraryImport, *java.Import: |
| af := apexFileForJavaModule(ctx, child.(javaModule)) |
| if !af.ok() { |
| ctx.PropertyErrorf("java_libs", "%q is not configured to be compiled into dex", depName) |
| return false |
| } |
| vctx.filesInfo = append(vctx.filesInfo, af) |
| return true // track transitive dependencies |
| default: |
| ctx.PropertyErrorf("java_libs", "%q of type %q is not supported", depName, ctx.OtherModuleType(child)) |
| } |
| case androidAppTag: |
| switch ap := child.(type) { |
| case *java.AndroidApp: |
| vctx.filesInfo = append(vctx.filesInfo, apexFilesForAndroidApp(ctx, ap)...) |
| return true // track transitive dependencies |
| case *java.AndroidAppImport: |
| vctx.filesInfo = append(vctx.filesInfo, apexFilesForAndroidApp(ctx, ap)...) |
| case *java.AndroidTestHelperApp: |
| vctx.filesInfo = append(vctx.filesInfo, apexFilesForAndroidApp(ctx, ap)...) |
| case *java.AndroidAppSet: |
| appDir := "app" |
| if ap.Privileged() { |
| appDir = "priv-app" |
| } |
| // TODO(b/224589412, b/226559955): Ensure that the dirname is |
| // suffixed so that PackageManager correctly invalidates the |
| // existing installed apk in favour of the new APK-in-APEX. |
| // See bugs for more information. |
| appDirName := filepath.Join(appDir, ap.BaseModuleName()+"@"+sanitizedBuildIdForPath(ctx)) |
| af := newApexFile(ctx, ap.OutputFile(), ap.BaseModuleName(), appDirName, appSet, ap) |
| af.certificate = java.PresignedCertificate |
| vctx.filesInfo = append(vctx.filesInfo, af) |
| default: |
| ctx.PropertyErrorf("apps", "%q is not an android_app module", depName) |
| } |
| case rroTag: |
| if rro, ok := child.(java.RuntimeResourceOverlayModule); ok { |
| vctx.filesInfo = append(vctx.filesInfo, apexFileForRuntimeResourceOverlay(ctx, rro)) |
| } else { |
| ctx.PropertyErrorf("rros", "%q is not an runtime_resource_overlay module", depName) |
| } |
| case bpfTag: |
| if bpfProgram, ok := child.(bpf.BpfModule); ok { |
| filesToCopy, _ := bpfProgram.OutputFiles("") |
| apex_sub_dir := bpfProgram.SubDir() |
| for _, bpfFile := range filesToCopy { |
| vctx.filesInfo = append(vctx.filesInfo, apexFileForBpfProgram(ctx, bpfFile, apex_sub_dir, bpfProgram)) |
| } |
| } else { |
| ctx.PropertyErrorf("bpfs", "%q is not a bpf module", depName) |
| } |
| case fsTag: |
| if fs, ok := child.(filesystem.Filesystem); ok { |
| vctx.filesInfo = append(vctx.filesInfo, apexFileForFilesystem(ctx, fs.OutputPath(), fs)) |
| } else { |
| ctx.PropertyErrorf("filesystems", "%q is not a filesystem module", depName) |
| } |
| case prebuiltTag: |
| if prebuilt, ok := child.(prebuilt_etc.PrebuiltEtcModule); ok { |
| vctx.filesInfo = append(vctx.filesInfo, apexFileForPrebuiltEtc(ctx, prebuilt, depName)) |
| } else { |
| ctx.PropertyErrorf("prebuilts", "%q is not a prebuilt_etc module", depName) |
| } |
| case compatConfigTag: |
| if compatConfig, ok := child.(java.PlatformCompatConfigIntf); ok { |
| vctx.filesInfo = append(vctx.filesInfo, apexFileForCompatConfig(ctx, compatConfig, depName)) |
| } else { |
| ctx.PropertyErrorf("compat_configs", "%q is not a platform_compat_config module", depName) |
| } |
| case testTag: |
| if ccTest, ok := child.(*cc.Module); ok { |
| if ccTest.IsTestPerSrcAllTestsVariation() { |
| // Multiple-output test module (where `test_per_src: true`). |
| // |
| // `ccTest` is the "" ("all tests") variation of a `test_per_src` module. |
| // We do not add this variation to `filesInfo`, as it has no output; |
| // however, we do add the other variations of this module as indirect |
| // dependencies (see below). |
| } else { |
| // Single-output test module (where `test_per_src: false`). |
| af := apexFileForExecutable(ctx, ccTest) |
| af.class = nativeTest |
| vctx.filesInfo = append(vctx.filesInfo, af) |
| } |
| return true // track transitive dependencies |
| } else { |
| ctx.PropertyErrorf("tests", "%q is not a cc module", depName) |
| } |
| case keyTag: |
| if key, ok := child.(*apexKey); ok { |
| a.privateKeyFile = key.privateKeyFile |
| a.publicKeyFile = key.publicKeyFile |
| } else { |
| ctx.PropertyErrorf("key", "%q is not an apex_key module", depName) |
| } |
| case certificateTag: |
| if dep, ok := child.(*java.AndroidAppCertificate); ok { |
| a.containerCertificateFile = dep.Certificate.Pem |
| a.containerPrivateKeyFile = dep.Certificate.Key |
| } else { |
| ctx.ModuleErrorf("certificate dependency %q must be an android_app_certificate module", depName) |
| } |
| } |
| return false |
| } |
| |
| if a.vndkApex { |
| return false |
| } |
| |
| // indirect dependencies |
| am, ok := child.(android.ApexModule) |
| if !ok { |
| return false |
| } |
| // We cannot use a switch statement on `depTag` here as the checked |
| // tags used below are private (e.g. `cc.sharedDepTag`). |
| if cc.IsSharedDepTag(depTag) || cc.IsRuntimeDepTag(depTag) { |
| if ch, ok := child.(*cc.Module); ok { |
| if ch.UseVndk() && a.useVndkAsStable(ctx) && ch.IsVndk() { |
| vctx.requireNativeLibs = append(vctx.requireNativeLibs, ":vndk") |
| return false |
| } |
| af := apexFileForNativeLibrary(ctx, ch, vctx.handleSpecialLibs) |
| af.transitiveDep = true |
| |
| abInfo := ctx.Provider(ApexBundleInfoProvider).(ApexBundleInfo) |
| if !abInfo.Contents.DirectlyInApex(depName) && (ch.IsStubs() || ch.HasStubsVariants()) { |
| // If the dependency is a stubs lib, don't include it in this APEX, |
| // but make sure that the lib is installed on the device. |
| // In case no APEX is having the lib, the lib is installed to the system |
| // partition. |
| // |
| // Always include if we are a host-apex however since those won't have any |
| // system libraries. |
| // |
| // Skip the dependency in unbundled builds where the device image is not |
| // being built. |
| if ch.IsStubsImplementationRequired() && !am.DirectlyInAnyApex() && !ctx.Config().UnbundledBuild() { |
| // we need a module name for Make |
| name := ch.ImplementationModuleNameForMake(ctx) + ch.Properties.SubName |
| if !android.InList(name, a.makeModulesToInstall) { |
| a.makeModulesToInstall = append(a.makeModulesToInstall, name) |
| } |
| } |
| vctx.requireNativeLibs = append(vctx.requireNativeLibs, af.stem()) |
| // Don't track further |
| return false |
| } |
| |
| // If the dep is not considered to be in the same |
| // apex, don't add it to filesInfo so that it is not |
| // included in this APEX. |
| // TODO(jiyong): move this to at the top of the |
| // else-if clause for the indirect dependencies. |
| // Currently, that's impossible because we would |
| // like to record requiredNativeLibs even when |
| // DepIsInSameAPex is false. We also shouldn't do |
| // this for host. |
| // |
| // TODO(jiyong): explain why the same module is passed in twice. |
| // Switching the first am to parent breaks lots of tests. |
| if !android.IsDepInSameApex(ctx, am, am) { |
| return false |
| } |
| |
| vctx.filesInfo = append(vctx.filesInfo, af) |
| return true // track transitive dependencies |
| } else if rm, ok := child.(*rust.Module); ok { |
| af := apexFileForRustLibrary(ctx, rm) |
| af.transitiveDep = true |
| vctx.filesInfo = append(vctx.filesInfo, af) |
| return true // track transitive dependencies |
| } |
| } else if cc.IsTestPerSrcDepTag(depTag) { |
| if ch, ok := child.(*cc.Module); ok { |
| af := apexFileForExecutable(ctx, ch) |
| // Handle modules created as `test_per_src` variations of a single test module: |
| // use the name of the generated test binary (`fileToCopy`) instead of the name |
| // of the original test module (`depName`, shared by all `test_per_src` |
| // variations of that module). |
| af.androidMkModuleName = filepath.Base(af.builtFile.String()) |
| // these are not considered transitive dep |
| af.transitiveDep = false |
| vctx.filesInfo = append(vctx.filesInfo, af) |
| return true // track transitive dependencies |
| } |
| } else if cc.IsHeaderDepTag(depTag) { |
| // nothing |
| } else if java.IsJniDepTag(depTag) { |
| // Because APK-in-APEX embeds jni_libs transitively, we don't need to track transitive deps |
| } else if java.IsXmlPermissionsFileDepTag(depTag) { |
| if prebuilt, ok := child.(prebuilt_etc.PrebuiltEtcModule); ok { |
| vctx.filesInfo = append(vctx.filesInfo, apexFileForPrebuiltEtc(ctx, prebuilt, depName)) |
| } |
| } else if rust.IsDylibDepTag(depTag) { |
| if rustm, ok := child.(*rust.Module); ok && rustm.IsInstallableToApex() { |
| af := apexFileForRustLibrary(ctx, rustm) |
| af.transitiveDep = true |
| vctx.filesInfo = append(vctx.filesInfo, af) |
| return true // track transitive dependencies |
| } |
| } else if rust.IsRlibDepTag(depTag) { |
| // Rlib is statically linked, but it might have shared lib |
| // dependencies. Track them. |
| return true |
| } else if java.IsBootclasspathFragmentContentDepTag(depTag) { |
| // Add the contents of the bootclasspath fragment to the apex. |
| switch child.(type) { |
| case *java.Library, *java.SdkLibrary: |
| javaModule := child.(javaModule) |
| af := apexFileForBootclasspathFragmentContentModule(ctx, parent, javaModule) |
| if !af.ok() { |
| ctx.PropertyErrorf("bootclasspath_fragments", |
| "bootclasspath_fragment content %q is not configured to be compiled into dex", depName) |
| return false |
| } |
| vctx.filesInfo = append(vctx.filesInfo, af) |
| return true // track transitive dependencies |
| default: |
| ctx.PropertyErrorf("bootclasspath_fragments", |
| "bootclasspath_fragment content %q of type %q is not supported", depName, ctx.OtherModuleType(child)) |
| } |
| } else if java.IsSystemServerClasspathFragmentContentDepTag(depTag) { |
| // Add the contents of the systemserverclasspath fragment to the apex. |
| switch child.(type) { |
| case *java.Library, *java.SdkLibrary: |
| af := apexFileForJavaModule(ctx, child.(javaModule)) |
| vctx.filesInfo = append(vctx.filesInfo, af) |
| if profileAf := apexFileForJavaModuleProfile(ctx, child.(javaModule)); profileAf != nil { |
| vctx.filesInfo = append(vctx.filesInfo, *profileAf) |
| } |
| return true // track transitive dependencies |
| default: |
| ctx.PropertyErrorf("systemserverclasspath_fragments", |
| "systemserverclasspath_fragment content %q of type %q is not supported", depName, ctx.OtherModuleType(child)) |
| } |
| } else if _, ok := depTag.(android.CopyDirectlyInAnyApexTag); ok { |
| // nothing |
| } else if depTag == android.DarwinUniversalVariantTag { |
| // nothing |
| } else if am.CanHaveApexVariants() && am.IsInstallableToApex() { |
| ctx.ModuleErrorf("unexpected tag %s for indirect dependency %q", android.PrettyPrintTag(depTag), depName) |
| } |
| return false |
| } |
| |
| func (a *apexBundle) shouldCheckDuplicate(ctx android.ModuleContext) bool { |
| // TODO(b/263308293) remove this |
| if a.properties.IsCoverageVariant { |
| return false |
| } |
| // TODO(b/263308515) remove this |
| if a.testApex { |
| return false |
| } |
| if ctx.DeviceConfig().DeviceArch() == "" { |
| return false |
| } |
| return true |
| } |
| |
| // Creates build rules for an APEX. It consists of the following major steps: |
| // |
| // 1) do some validity checks such as apex_available, min_sdk_version, etc. |
| // 2) traverse the dependency tree to collect apexFile structs from them. |
| // 3) some fields in apexBundle struct are configured |
| // 4) generate the build rules to create the APEX. This is mostly done in builder.go. |
| func (a *apexBundle) GenerateAndroidBuildActions(ctx android.ModuleContext) { |
| //////////////////////////////////////////////////////////////////////////////////////////// |
| // 1) do some validity checks such as apex_available, min_sdk_version, etc. |
| if !a.commonBuildActions(ctx) { |
| return |
| } |
| //////////////////////////////////////////////////////////////////////////////////////////// |
| // 2) traverse the dependency tree to collect apexFile structs from them. |
| // Collect the module directory for IDE info in java/jdeps.go. |
| a.modulePaths = append(a.modulePaths, ctx.ModuleDir()) |
| |
| // TODO(jiyong): do this using WalkPayloadDeps |
| // TODO(jiyong): make this clean!!! |
| vctx := visitorContext{ |
| handleSpecialLibs: !android.Bool(a.properties.Ignore_system_library_special_case), |
| checkDuplicate: a.shouldCheckDuplicate(ctx), |
| } |
| ctx.WalkDepsBlueprint(func(child, parent blueprint.Module) bool { return a.depVisitor(&vctx, ctx, child, parent) }) |
| vctx.normalizeFileInfo(ctx) |
| if a.privateKeyFile == nil { |
| if ctx.Config().AllowMissingDependencies() { |
| // TODO(b/266099037): a better approach for slim manifests. |
| ctx.AddMissingDependencies([]string{String(a.overridableProperties.Key)}) |
| // Create placeholder paths for later stages that expect to see those paths, |
| // though they won't be used. |
| var unusedPath = android.PathForModuleOut(ctx, "nonexistentprivatekey") |
| ctx.Build(pctx, android.BuildParams{ |
| Rule: android.ErrorRule, |
| Output: unusedPath, |
| Args: map[string]string{ |
| "error": "Private key not available", |
| }, |
| }) |
| a.privateKeyFile = unusedPath |
| } else { |
| ctx.PropertyErrorf("key", "private_key for %q could not be found", String(a.overridableProperties.Key)) |
| return |
| } |
| } |
| |
| if a.publicKeyFile == nil { |
| if ctx.Config().AllowMissingDependencies() { |
| // TODO(b/266099037): a better approach for slim manifests. |
| ctx.AddMissingDependencies([]string{String(a.overridableProperties.Key)}) |
| // Create placeholder paths for later stages that expect to see those paths, |
| // though they won't be used. |
| var unusedPath = android.PathForModuleOut(ctx, "nonexistentpublickey") |
| ctx.Build(pctx, android.BuildParams{ |
| Rule: android.ErrorRule, |
| Output: unusedPath, |
| Args: map[string]string{ |
| "error": "Public key not available", |
| }, |
| }) |
| a.publicKeyFile = unusedPath |
| } else { |
| ctx.PropertyErrorf("key", "public_key for %q could not be found", String(a.overridableProperties.Key)) |
| return |
| } |
| } |
| |
| //////////////////////////////////////////////////////////////////////////////////////////// |
| // 3) some fields in apexBundle struct are configured |
| a.installDir = android.PathForModuleInstall(ctx, "apex") |
| a.filesInfo = vctx.filesInfo |
| |
| a.setPayloadFsType(ctx) |
| a.setSystemLibLink(ctx) |
| a.compatSymlinks = makeCompatSymlinks(a.BaseModuleName(), ctx) |
| |
| //////////////////////////////////////////////////////////////////////////////////////////// |
| // 4) generate the build rules to create the APEX. This is done in builder.go. |
| a.buildManifest(ctx, vctx.provideNativeLibs, vctx.requireNativeLibs) |
| a.buildApex(ctx) |
| a.buildApexDependencyInfo(ctx) |
| a.buildLintReports(ctx) |
| } |
| |
| // apexBootclasspathFragmentFiles returns the list of apexFile structures defining the files that |
| // the bootclasspath_fragment contributes to the apex. |
| func apexBootclasspathFragmentFiles(ctx android.ModuleContext, module blueprint.Module) []apexFile { |
| bootclasspathFragmentInfo := ctx.OtherModuleProvider(module, java.BootclasspathFragmentApexContentInfoProvider).(java.BootclasspathFragmentApexContentInfo) |
| var filesToAdd []apexFile |
| |
| // Add classpaths.proto config. |
| if af := apexClasspathFragmentProtoFile(ctx, module); af != nil { |
| filesToAdd = append(filesToAdd, *af) |
| } |
| |
| pathInApex := bootclasspathFragmentInfo.ProfileInstallPathInApex() |
| if pathInApex != "" { |
| pathOnHost := bootclasspathFragmentInfo.ProfilePathOnHost() |
| tempPath := android.PathForModuleOut(ctx, "boot_image_profile", pathInApex) |
| |
| if pathOnHost != nil { |
| // We need to copy the profile to a temporary path with the right filename because the apexer |
| // will take the filename as is. |
| ctx.Build(pctx, android.BuildParams{ |
| Rule: android.Cp, |
| Input: pathOnHost, |
| Output: tempPath, |
| }) |
| } else { |
| // At this point, the boot image profile cannot be generated. It is probably because the boot |
| // image profile source file does not exist on the branch, or it is not available for the |
| // current build target. |
| // However, we cannot enforce the boot image profile to be generated because some build |
| // targets (such as module SDK) do not need it. It is only needed when the APEX is being |
| // built. Therefore, we create an error rule so that an error will occur at the ninja phase |
| // only if the APEX is being built. |
| ctx.Build(pctx, android.BuildParams{ |
| Rule: android.ErrorRule, |
| Output: tempPath, |
| Args: map[string]string{ |
| "error": "Boot image profile cannot be generated", |
| }, |
| }) |
| } |
| |
| androidMkModuleName := filepath.Base(pathInApex) |
| af := newApexFile(ctx, tempPath, androidMkModuleName, filepath.Dir(pathInApex), etc, nil) |
| filesToAdd = append(filesToAdd, af) |
| } |
| |
| return filesToAdd |
| } |
| |
| // apexClasspathFragmentProtoFile returns *apexFile structure defining the classpath.proto config that |
| // the module contributes to the apex; or nil if the proto config was not generated. |
| func apexClasspathFragmentProtoFile(ctx android.ModuleContext, module blueprint.Module) *apexFile { |
| info := ctx.OtherModuleProvider(module, java.ClasspathFragmentProtoContentInfoProvider).(java.ClasspathFragmentProtoContentInfo) |
| if !info.ClasspathFragmentProtoGenerated { |
| return nil |
| } |
| classpathProtoOutput := info.ClasspathFragmentProtoOutput |
| af := newApexFile(ctx, classpathProtoOutput, classpathProtoOutput.Base(), info.ClasspathFragmentProtoInstallDir.Rel(), etc, nil) |
| return &af |
| } |
| |
| // apexFileForBootclasspathFragmentContentModule creates an apexFile for a bootclasspath_fragment |
| // content module, i.e. a library that is part of the bootclasspath. |
| func apexFileForBootclasspathFragmentContentModule(ctx android.ModuleContext, fragmentModule blueprint.Module, javaModule javaModule) apexFile { |
| bootclasspathFragmentInfo := ctx.OtherModuleProvider(fragmentModule, java.BootclasspathFragmentApexContentInfoProvider).(java.BootclasspathFragmentApexContentInfo) |
| |
| // Get the dexBootJar from the bootclasspath_fragment as that is responsible for performing the |
| // hidden API encpding. |
| dexBootJar, err := bootclasspathFragmentInfo.DexBootJarPathForContentModule(javaModule) |
| if err != nil { |
| ctx.ModuleErrorf("%s", err) |
| } |
| |
| // Create an apexFile as for a normal java module but with the dex boot jar provided by the |
| // bootclasspath_fragment. |
| af := apexFileForJavaModuleWithFile(ctx, javaModule, dexBootJar) |
| return af |
| } |
| |
| /////////////////////////////////////////////////////////////////////////////////////////////////// |
| // Factory functions |
| // |
| |
| func newApexBundle() *apexBundle { |
| module := &apexBundle{} |
| |
| module.AddProperties(&module.properties) |
| module.AddProperties(&module.targetProperties) |
| module.AddProperties(&module.archProperties) |
| module.AddProperties(&module.overridableProperties) |
| |
| android.InitAndroidMultiTargetsArchModule(module, android.DeviceSupported, android.MultilibCommon) |
| android.InitDefaultableModule(module) |
| android.InitOverridableModule(module, &module.overridableProperties.Overrides) |
| android.InitBazelModule(module) |
| multitree.InitExportableModule(module) |
| return module |
| } |
| |
| func ApexBundleFactory(testApex bool) android.Module { |
| bundle := newApexBundle() |
| bundle.testApex = testApex |
| return bundle |
| } |
| |
| // apex_test is an APEX for testing. The difference from the ordinary apex module type is that |
| // certain compatibility checks such as apex_available are not done for apex_test. |
| func TestApexBundleFactory() android.Module { |
| bundle := newApexBundle() |
| bundle.testApex = true |
| return bundle |
| } |
| |
| // apex packages other modules into an APEX file which is a packaging format for system-level |
| // components like binaries, shared libraries, etc. |
| func BundleFactory() android.Module { |
| return newApexBundle() |
| } |
| |
| type Defaults struct { |
| android.ModuleBase |
| android.DefaultsModuleBase |
| } |
| |
| // apex_defaults provides defaultable properties to other apex modules. |
| func DefaultsFactory() android.Module { |
| module := &Defaults{} |
| |
| module.AddProperties( |
| &apexBundleProperties{}, |
| &apexTargetBundleProperties{}, |
| &apexArchBundleProperties{}, |
| &overridableProperties{}, |
| ) |
| |
| android.InitDefaultsModule(module) |
| return module |
| } |
| |
| type OverrideApex struct { |
| android.ModuleBase |
| android.OverrideModuleBase |
| android.BazelModuleBase |
| } |
| |
| func (o *OverrideApex) GenerateAndroidBuildActions(_ android.ModuleContext) { |
| // All the overrides happen in the base module. |
| } |
| |
| // override_apex is used to create an apex module based on another apex module by overriding some of |
| // its properties. |
| func OverrideApexFactory() android.Module { |
| m := &OverrideApex{} |
| |
| m.AddProperties(&overridableProperties{}) |
| |
| android.InitAndroidMultiTargetsArchModule(m, android.DeviceSupported, android.MultilibCommon) |
| android.InitOverrideModule(m) |
| android.InitBazelModule(m) |
| return m |
| } |
| |
| func (o *OverrideApex) ConvertWithBp2build(ctx android.TopDownMutatorContext) { |
| if ctx.ModuleType() != "override_apex" { |
| return |
| } |
| |
| baseApexModuleName := o.OverrideModuleBase.GetOverriddenModuleName() |
| baseModule, baseApexExists := ctx.ModuleFromName(baseApexModuleName) |
| if !baseApexExists { |
| panic(fmt.Errorf("Base apex module doesn't exist: %s", baseApexModuleName)) |
| } |
| |
| a, baseModuleIsApex := baseModule.(*apexBundle) |
| if !baseModuleIsApex { |
| panic(fmt.Errorf("Base module is not apex module: %s", baseApexModuleName)) |
| } |
| attrs, props, commonAttrs := convertWithBp2build(a, ctx) |
| |
| // We just want the name, not module reference. |
| baseApexName := strings.TrimPrefix(baseApexModuleName, ":") |
| attrs.Base_apex_name = &baseApexName |
| |
| for _, p := range o.GetProperties() { |
| overridableProperties, ok := p.(*overridableProperties) |
| if !ok { |
| continue |
| } |
| |
| // Manifest is either empty or a file in the directory of base APEX and is not overridable. |
| // After it is converted in convertWithBp2build(baseApex, ctx), |
| // the attrs.Manifest.Value.Label is the file path relative to the directory |
| // of base apex. So the following code converts it to a label that looks like |
| // <package of base apex>:<path of manifest file> if base apex and override |
| // apex are not in the same package. |
| baseApexPackage := ctx.OtherModuleDir(a) |
| overrideApexPackage := ctx.ModuleDir() |
| if baseApexPackage != overrideApexPackage { |
| attrs.Manifest.Value.Label = "//" + baseApexPackage + ":" + attrs.Manifest.Value.Label |
| } |
| |
| // Key |
| if overridableProperties.Key != nil { |
| attrs.Key = bazel.LabelAttribute{} |
| attrs.Key.SetValue(android.BazelLabelForModuleDepSingle(ctx, *overridableProperties.Key)) |
| } |
| |
| // Certificate |
| if overridableProperties.Certificate == nil { |
| // If overridableProperties.Certificate is nil, clear this out as |
| // well with zeroed structs, so the override_apex does not use the |
| // base apex's certificate. |
| attrs.Certificate = bazel.LabelAttribute{} |
| attrs.Certificate_name = bazel.StringAttribute{} |
| } else { |
| attrs.Certificate, attrs.Certificate_name = android.BazelStringOrLabelFromProp(ctx, overridableProperties.Certificate) |
| } |
| |
| // Prebuilts |
| if overridableProperties.Prebuilts != nil { |
| prebuiltsLabelList := android.BazelLabelForModuleDeps(ctx, overridableProperties.Prebuilts) |
| attrs.Prebuilts = bazel.MakeLabelListAttribute(prebuiltsLabelList) |
| } |
| |
| // Compressible |
| if overridableProperties.Compressible != nil { |
| attrs.Compressible = bazel.BoolAttribute{Value: overridableProperties.Compressible} |
| } |
| |
| // Package name |
| // |
| // e.g. com.android.adbd's package name is com.android.adbd, but |
| // com.google.android.adbd overrides the package name to com.google.android.adbd |
| // |
| // TODO: this can be overridden from the product configuration, see |
| // getOverrideManifestPackageName and |
| // PRODUCT_MANIFEST_PACKAGE_NAME_OVERRIDES. |
| // |
| // Instead of generating the BUILD files differently based on the product config |
| // at the point of conversion, this should be handled by the BUILD file loading |
| // from the soong_injection's product_vars, so product config is decoupled from bp2build. |
| if overridableProperties.Package_name != "" { |
| attrs.Package_name = &overridableProperties.Package_name |
| } |
| |
| // Logging parent |
| if overridableProperties.Logging_parent != "" { |
| attrs.Logging_parent = &overridableProperties.Logging_parent |
| } |
| } |
| |
| commonAttrs.Name = o.Name() |
| |
| ctx.CreateBazelTargetModule(props, commonAttrs, &attrs) |
| } |
| |
| /////////////////////////////////////////////////////////////////////////////////////////////////// |
| // Vality check routines |
| // |
| // These are called in at the very beginning of GenerateAndroidBuildActions to flag an error when |
| // certain conditions are not met. |
| // |
| // TODO(jiyong): move these checks to a separate go file. |
| |
| var _ android.ModuleWithMinSdkVersionCheck = (*apexBundle)(nil) |
| |
| // Ensures that min_sdk_version of the included modules are equal or less than the min_sdk_version |
| // of this apexBundle. |
| func (a *apexBundle) CheckMinSdkVersion(ctx android.ModuleContext) { |
| if a.testApex || a.vndkApex { |
| return |
| } |
| // apexBundle::minSdkVersion reports its own errors. |
| minSdkVersion := a.minSdkVersion(ctx) |
| android.CheckMinSdkVersion(ctx, minSdkVersion, a.WalkPayloadDeps) |
| } |
| |
| // Returns apex's min_sdk_version string value, honoring overrides |
| func (a *apexBundle) minSdkVersionValue(ctx android.EarlyModuleContext) string { |
| // Only override the minSdkVersion value on Apexes which already specify |
| // a min_sdk_version (it's optional for non-updatable apexes), and that its |
| // min_sdk_version value is lower than the one to override with. |
| minApiLevel := minSdkVersionFromValue(ctx, proptools.String(a.properties.Min_sdk_version)) |
| if minApiLevel.IsNone() { |
| return "" |
| } |
| |
| overrideMinSdkValue := ctx.DeviceConfig().ApexGlobalMinSdkVersionOverride() |
| overrideApiLevel := minSdkVersionFromValue(ctx, overrideMinSdkValue) |
| if !overrideApiLevel.IsNone() && overrideApiLevel.CompareTo(minApiLevel) > 0 { |
| minApiLevel = overrideApiLevel |
| } |
| |
| return minApiLevel.String() |
| } |
| |
| // Returns apex's min_sdk_version SdkSpec, honoring overrides |
| func (a *apexBundle) MinSdkVersion(ctx android.EarlyModuleContext) android.ApiLevel { |
| return a.minSdkVersion(ctx) |
| } |
| |
| // Returns apex's min_sdk_version ApiLevel, honoring overrides |
| func (a *apexBundle) minSdkVersion(ctx android.EarlyModuleContext) android.ApiLevel { |
| return minSdkVersionFromValue(ctx, a.minSdkVersionValue(ctx)) |
| } |
| |
| // Construct ApiLevel object from min_sdk_version string value |
| func minSdkVersionFromValue(ctx android.EarlyModuleContext, value string) android.ApiLevel { |
| if value == "" { |
| return android.NoneApiLevel |
| } |
| apiLevel, err := android.ApiLevelFromUser(ctx, value) |
| if err != nil { |
| ctx.PropertyErrorf("min_sdk_version", "%s", err.Error()) |
| return android.NoneApiLevel |
| } |
| return apiLevel |
| } |
| |
| // Ensures that a lib providing stub isn't statically linked |
| func (a *apexBundle) checkStaticLinkingToStubLibraries(ctx android.ModuleContext) { |
| // Practically, we only care about regular APEXes on the device. |
| if a.testApex || a.vndkApex { |
| return |
| } |
| |
| abInfo := ctx.Provider(ApexBundleInfoProvider).(ApexBundleInfo) |
| |
| a.WalkPayloadDeps(ctx, func(ctx android.ModuleContext, from blueprint.Module, to android.ApexModule, externalDep bool) bool { |
| if ccm, ok := to.(*cc.Module); ok { |
| apexName := ctx.ModuleName() |
| fromName := ctx.OtherModuleName(from) |
| toName := ctx.OtherModuleName(to) |
| |
| // If `to` is not actually in the same APEX as `from` then it does not need |
| // apex_available and neither do any of its dependencies. |
| // |
| // It is ok to call DepIsInSameApex() directly from within WalkPayloadDeps(). |
| if am, ok := from.(android.DepIsInSameApex); ok && !am.DepIsInSameApex(ctx, to) { |
| // As soon as the dependency graph crosses the APEX boundary, don't go further. |
| return false |
| } |
| |
| // The dynamic linker and crash_dump tool in the runtime APEX is the only |
| // exception to this rule. It can't make the static dependencies dynamic |
| // because it can't do the dynamic linking for itself. |
| // Same rule should be applied to linkerconfig, because it should be executed |
| // only with static linked libraries before linker is available with ld.config.txt |
| if apexName == "com.android.runtime" && (fromName == "linker" || fromName == "crash_dump" || fromName == "linkerconfig") { |
| return false |
| } |
| |
| isStubLibraryFromOtherApex := ccm.HasStubsVariants() && !abInfo.Contents.DirectlyInApex(toName) |
| if isStubLibraryFromOtherApex && !externalDep { |
| ctx.ModuleErrorf("%q required by %q is a native library providing stub. "+ |
| "It shouldn't be included in this APEX via static linking. Dependency path: %s", to.String(), fromName, ctx.GetPathString(false)) |
| } |
| |
| } |
| return true |
| }) |
| } |
| |
| // checkUpdatable enforces APEX and its transitive dep properties to have desired values for updatable APEXes. |
| func (a *apexBundle) checkUpdatable(ctx android.ModuleContext) { |
| if a.Updatable() { |
| if a.minSdkVersionValue(ctx) == "" { |
| ctx.PropertyErrorf("updatable", "updatable APEXes should set min_sdk_version as well") |
| } |
| if a.UsePlatformApis() { |
| ctx.PropertyErrorf("updatable", "updatable APEXes can't use platform APIs") |
| } |
| if proptools.Bool(a.properties.Use_vndk_as_stable) { |
| ctx.PropertyErrorf("use_vndk_as_stable", "updatable APEXes can't use external VNDK libs") |
| } |
| if a.FutureUpdatable() { |
| ctx.PropertyErrorf("future_updatable", "Already updatable. Remove `future_updatable: true:`") |
| } |
| a.checkJavaStableSdkVersion(ctx) |
| a.checkClasspathFragments(ctx) |
| } |
| } |
| |
| // checkClasspathFragments enforces that all classpath fragments in deps generate classpaths.proto config. |
| func (a *apexBundle) checkClasspathFragments(ctx android.ModuleContext) { |
| ctx.VisitDirectDeps(func(module android.Module) { |
| if tag := ctx.OtherModuleDependencyTag(module); tag == bcpfTag || tag == sscpfTag { |
| info := ctx.OtherModuleProvider(module, java.ClasspathFragmentProtoContentInfoProvider).(java.ClasspathFragmentProtoContentInfo) |
| if !info.ClasspathFragmentProtoGenerated { |
| ctx.OtherModuleErrorf(module, "is included in updatable apex %v, it must not set generate_classpaths_proto to false", ctx.ModuleName()) |
| } |
| } |
| }) |
| } |
| |
| // checkJavaStableSdkVersion enforces that all Java deps are using stable SDKs to compile. |
| func (a *apexBundle) checkJavaStableSdkVersion(ctx android.ModuleContext) { |
| // Visit direct deps only. As long as we guarantee top-level deps are using stable SDKs, |
| // java's checkLinkType guarantees correct usage for transitive deps |
| ctx.VisitDirectDepsBlueprint(func(module blueprint.Module) { |
| tag := ctx.OtherModuleDependencyTag(module) |
| switch tag { |
| case javaLibTag, androidAppTag: |
| if m, ok := module.(interface { |
| CheckStableSdkVersion(ctx android.BaseModuleContext) error |
| }); ok { |
| if err := m.CheckStableSdkVersion(ctx); err != nil { |
| ctx.ModuleErrorf("cannot depend on \"%v\": %v", ctx.OtherModuleName(module), err) |
| } |
| } |
| } |
| }) |
| } |
| |
| // checkApexAvailability ensures that the all the dependencies are marked as available for this APEX. |
| func (a *apexBundle) checkApexAvailability(ctx android.ModuleContext) { |
| // Let's be practical. Availability for test, host, and the VNDK apex isn't important |
| if a.testApex || a.vndkApex { |
| return |
| } |
| |
| // Because APEXes targeting other than system/system_ext partitions can't set |
| // apex_available, we skip checks for these APEXes |
| if a.SocSpecific() || a.DeviceSpecific() || (a.ProductSpecific() && ctx.Config().EnforceProductPartitionInterface()) { |
| return |
| } |
| |
| // Coverage build adds additional dependencies for the coverage-only runtime libraries. |
| // Requiring them and their transitive depencies with apex_available is not right |
| // because they just add noise. |
| if ctx.Config().IsEnvTrue("EMMA_INSTRUMENT") || a.IsNativeCoverageNeeded(ctx) { |
| return |
| } |
| |
| a.WalkPayloadDeps(ctx, func(ctx android.ModuleContext, from blueprint.Module, to android.ApexModule, externalDep bool) bool { |
| // As soon as the dependency graph crosses the APEX boundary, don't go further. |
| if externalDep { |
| return false |
| } |
| |
| apexName := ctx.ModuleName() |
| for _, props := range ctx.Module().GetProperties() { |
| if apexProps, ok := props.(*apexBundleProperties); ok { |
| if apexProps.Apex_available_name != nil { |
| apexName = *apexProps.Apex_available_name |
| } |
| } |
| } |
| fromName := ctx.OtherModuleName(from) |
| toName := ctx.OtherModuleName(to) |
| |
| // If `to` is not actually in the same APEX as `from` then it does not need |
| // apex_available and neither do any of its dependencies. |
| // |
| // It is ok to call DepIsInSameApex() directly from within WalkPayloadDeps(). |
| if am, ok := from.(android.DepIsInSameApex); ok && !am.DepIsInSameApex(ctx, to) { |
| // As soon as the dependency graph crosses the APEX boundary, don't go |
| // further. |
| return false |
| } |
| |
| if to.AvailableFor(apexName) || baselineApexAvailable(apexName, toName) { |
| return true |
| } |
| ctx.ModuleErrorf("%q requires %q that doesn't list the APEX under 'apex_available'."+ |
| "\n\nDependency path:%s\n\n"+ |
| "Consider adding %q to 'apex_available' property of %q", |
| fromName, toName, ctx.GetPathString(true), apexName, toName) |
| // Visit this module's dependencies to check and report any issues with their availability. |
| return true |
| }) |
| } |
| |
| // checkStaticExecutable ensures that executables in an APEX are not static. |
| func (a *apexBundle) checkStaticExecutables(ctx android.ModuleContext) { |
| ctx.VisitDirectDepsBlueprint(func(module blueprint.Module) { |
| if ctx.OtherModuleDependencyTag(module) != executableTag { |
| return |
| } |
| |
| if l, ok := module.(cc.LinkableInterface); ok && l.StaticExecutable() { |
| apex := a.ApexVariationName() |
| exec := ctx.OtherModuleName(module) |
| if isStaticExecutableAllowed(apex, exec) { |
| return |
| } |
| ctx.ModuleErrorf("executable %s is static", ctx.OtherModuleName(module)) |
| } |
| }) |
| } |
| |
| // A small list of exceptions where static executables are allowed in APEXes. |
| func isStaticExecutableAllowed(apex string, exec string) bool { |
| m := map[string][]string{ |
| "com.android.runtime": { |
| "linker", |
| "linkerconfig", |
| }, |
| } |
| execNames, ok := m[apex] |
| return ok && android.InList(exec, execNames) |
| } |
| |
| // Collect information for opening IDE project files in java/jdeps.go. |
| func (a *apexBundle) IDEInfo(dpInfo *android.IdeInfo) { |
| dpInfo.Deps = append(dpInfo.Deps, a.properties.Java_libs...) |
| dpInfo.Deps = append(dpInfo.Deps, a.properties.Bootclasspath_fragments...) |
| dpInfo.Deps = append(dpInfo.Deps, a.properties.Systemserverclasspath_fragments...) |
| dpInfo.Paths = append(dpInfo.Paths, a.modulePaths...) |
| } |
| |
| var ( |
| apexAvailBaseline = makeApexAvailableBaseline() |
| inverseApexAvailBaseline = invertApexBaseline(apexAvailBaseline) |
| ) |
| |
| func baselineApexAvailable(apex, moduleName string) bool { |
| key := apex |
| moduleName = normalizeModuleName(moduleName) |
| |
| if val, ok := apexAvailBaseline[key]; ok && android.InList(moduleName, val) { |
| return true |
| } |
| |
| key = android.AvailableToAnyApex |
| if val, ok := apexAvailBaseline[key]; ok && android.InList(moduleName, val) { |
| return true |
| } |
| |
| return false |
| } |
| |
| func normalizeModuleName(moduleName string) string { |
| // Prebuilt modules (e.g. java_import, etc.) have "prebuilt_" prefix added by the build |
| // system. Trim the prefix for the check since they are confusing |
| moduleName = android.RemoveOptionalPrebuiltPrefix(moduleName) |
| if strings.HasPrefix(moduleName, "libclang_rt.") { |
| // This module has many arch variants that depend on the product being built. |
| // We don't want to list them all |
| moduleName = "libclang_rt" |
| } |
| if strings.HasPrefix(moduleName, "androidx.") { |
| // TODO(b/156996905) Set apex_available/min_sdk_version for androidx support libraries |
| moduleName = "androidx" |
| } |
| return moduleName |
| } |
| |
| // Transform the map of apex -> modules to module -> apexes. |
| func invertApexBaseline(m map[string][]string) map[string][]string { |
| r := make(map[string][]string) |
| for apex, modules := range m { |
| for _, module := range modules { |
| r[module] = append(r[module], apex) |
| } |
| } |
| return r |
| } |
| |
| // Retrieve the baseline of apexes to which the supplied module belongs. |
| func BaselineApexAvailable(moduleName string) []string { |
| return inverseApexAvailBaseline[normalizeModuleName(moduleName)] |
| } |
| |
| // This is a map from apex to modules, which overrides the apex_available setting for that |
| // particular module to make it available for the apex regardless of its setting. |
| // TODO(b/147364041): remove this |
| func makeApexAvailableBaseline() map[string][]string { |
| // The "Module separator"s below are employed to minimize merge conflicts. |
| m := make(map[string][]string) |
| // |
| // Module separator |
| // |
| m["com.android.appsearch"] = []string{ |
| "icing-java-proto-lite", |
| } |
| // |
| // Module separator |
| // |
| m["com.android.btservices"] = []string{ |
| // empty |
| } |
| // |
| // Module separator |
| // |
| m["com.android.cellbroadcast"] = []string{} |
| // |
| // Module separator |
| // |
| m["com.android.extservices"] = []string{ |
| "ExtServices-core", |
| "libtextclassifier-java", |
| "textclassifier-statsd", |
| "TextClassifierNotificationLibNoManifest", |
| "TextClassifierServiceLibNoManifest", |
| } |
| // |
| // Module separator |
| // |
| m["com.android.neuralnetworks"] = []string{ |
| "android.hardware.neuralnetworks@1.0", |
| "android.hardware.neuralnetworks@1.1", |
| "android.hardware.neuralnetworks@1.2", |
| "android.hardware.neuralnetworks@1.3", |
| "android.hidl.allocator@1.0", |
| "android.hidl.memory.token@1.0", |
| "android.hidl.memory@1.0", |
| "android.hidl.safe_union@1.0", |
| "libarect", |
| "libprocpartition", |
| } |
| // |
| // Module separator |
| // |
| m["com.android.media"] = []string{ |
| // empty |
| } |
| // |
| // Module separator |
| // |
| m["com.android.media.swcodec"] = []string{ |
| // empty |
| } |
| // |
| // Module separator |
| // |
| m["com.android.mediaprovider"] = []string{ |
| "MediaProvider", |
| "MediaProviderGoogle", |
| "fmtlib_ndk", |
| "libbase_ndk", |
| "libfuse", |
| "libfuse_jni", |
| } |
| // |
| // Module separator |
| // |
| m["com.android.runtime"] = []string{ |
| "libdebuggerd", |
| "libdebuggerd_common_headers", |
| "libdebuggerd_handler_core", |
| "libdl_static", |
| "libjemalloc5", |
| "liblinker_main", |
| "liblinker_malloc", |
| "liblzma", |
| "libprocinfo", |
| "libpropertyinfoparser", |
| "libscudo", |
| "libsystemproperties", |
| "libtombstoned_client_static", |
| "libunwindstack", |
| "libz", |
| "libziparchive", |
| } |
| // |
| // Module separator |
| // |
| m["com.android.tethering"] = []string{ |
| "android.hardware.tetheroffload.config-V1.0-java", |
| "android.hardware.tetheroffload.control-V1.0-java", |
| "net-utils-framework-common", |
| } |
| // |
| // Module separator |
| // |
| m["com.android.wifi"] = []string{ |
| "PlatformProperties", |
| "android.hardware.wifi-V1.0-java", |
| "android.hardware.wifi-V1.0-java-constants", |
| "android.hardware.wifi-V1.1-java", |
| "android.hardware.wifi-V1.2-java", |
| "android.hardware.wifi-V1.3-java", |
| "android.hardware.wifi-V1.4-java", |
| "android.hardware.wifi.hostapd-V1.0-java", |
| "android.hardware.wifi.hostapd-V1.1-java", |
| "android.hardware.wifi.hostapd-V1.2-java", |
| "android.hardware.wifi.supplicant-V1.0-java", |
| "android.hardware.wifi.supplicant-V1.1-java", |
| "android.hardware.wifi.supplicant-V1.2-java", |
| "android.hardware.wifi.supplicant-V1.3-java", |
| "bouncycastle-unbundled", |
| "framework-wifi-util-lib", |
| "ksoap2", |
| "libnanohttpd", |
| "wifi-lite-protos", |
| "wifi-nano-protos", |
| "wifi-service-pre-jarjar", |
| } |
| // |
| // Module separator |
| // |
| m[android.AvailableToAnyApex] = []string{ |
| "libprofile-clang-extras", |
| "libprofile-clang-extras_ndk", |
| "libprofile-extras", |
| "libprofile-extras_ndk", |
| } |
| return m |
| } |
| |
| func init() { |
| android.AddNeverAllowRules(createBcpPermittedPackagesRules(qBcpPackages())...) |
| android.AddNeverAllowRules(createBcpPermittedPackagesRules(rBcpPackages())...) |
| } |
| |
| func createBcpPermittedPackagesRules(bcpPermittedPackages map[string][]string) []android.Rule { |
| rules := make([]android.Rule, 0, len(bcpPermittedPackages)) |
| for jar, permittedPackages := range bcpPermittedPackages { |
| permittedPackagesRule := android.NeverAllow(). |
| With("name", jar). |
| WithMatcher("permitted_packages", android.NotInList(permittedPackages)). |
| Because(jar + |
| " bootjar may only use these package prefixes: " + strings.Join(permittedPackages, ",") + |
| ". Please consider the following alternatives:\n" + |
| " 1. If the offending code is from a statically linked library, consider " + |
| "removing that dependency and using an alternative already in the " + |
| "bootclasspath, or perhaps a shared library." + |
| " 2. Move the offending code into an allowed package.\n" + |
| " 3. Jarjar the offending code. Please be mindful of the potential system " + |
| "health implications of bundling that code, particularly if the offending jar " + |
| "is part of the bootclasspath.") |
| |
| rules = append(rules, permittedPackagesRule) |
| } |
| return rules |
| } |
| |
| // DO NOT EDIT! These are the package prefixes that are exempted from being AOT'ed by ART. |
| // Adding code to the bootclasspath in new packages will cause issues on module update. |
| func qBcpPackages() map[string][]string { |
| return map[string][]string{ |
| "conscrypt": { |
| "android.net.ssl", |
| "com.android.org.conscrypt", |
| }, |
| "updatable-media": { |
| "android.media", |
| }, |
| } |
| } |
| |
| // DO NOT EDIT! These are the package prefixes that are exempted from being AOT'ed by ART. |
| // Adding code to the bootclasspath in new packages will cause issues on module update. |
| func rBcpPackages() map[string][]string { |
| return map[string][]string{ |
| "framework-mediaprovider": { |
| "android.provider", |
| }, |
| "framework-permission": { |
| "android.permission", |
| "android.app.role", |
| "com.android.permission", |
| "com.android.role", |
| }, |
| "framework-sdkextensions": { |
| "android.os.ext", |
| }, |
| "framework-statsd": { |
| "android.app", |
| "android.os", |
| "android.util", |
| "com.android.internal.statsd", |
| "com.android.server.stats", |
| }, |
| "framework-wifi": { |
| "com.android.server.wifi", |
| "com.android.wifi.x", |
| "android.hardware.wifi", |
| "android.net.wifi", |
| }, |
| "framework-tethering": { |
| "android.net", |
| }, |
| } |
| } |
| |
| // For Bazel / bp2build |
| |
| type bazelApexBundleAttributes struct { |
| Manifest bazel.LabelAttribute |
| Android_manifest bazel.LabelAttribute |
| File_contexts bazel.LabelAttribute |
| Canned_fs_config bazel.LabelAttribute |
| Key bazel.LabelAttribute |
| Certificate bazel.LabelAttribute // used when the certificate prop is a module |
| Certificate_name bazel.StringAttribute // used when the certificate prop is a string |
| Min_sdk_version bazel.StringAttribute |
| Updatable bazel.BoolAttribute |
| Installable bazel.BoolAttribute |
| Binaries bazel.LabelListAttribute |
| Prebuilts bazel.LabelListAttribute |
| Native_shared_libs_32 bazel.LabelListAttribute |
| Native_shared_libs_64 bazel.LabelListAttribute |
| Compressible bazel.BoolAttribute |
| Package_name *string |
| Logging_parent *string |
| Tests bazel.LabelListAttribute |
| Base_apex_name *string |
| Apex_available_name *string |
| Variant_version *string |
| } |
| |
| type convertedNativeSharedLibs struct { |
| Native_shared_libs_32 bazel.LabelListAttribute |
| Native_shared_libs_64 bazel.LabelListAttribute |
| } |
| |
| const ( |
| minSdkVersionPropName = "Min_sdk_version" |
| ) |
| |
| // ConvertWithBp2build performs bp2build conversion of an apex |
| func (a *apexBundle) ConvertWithBp2build(ctx android.TopDownMutatorContext) { |
| // We only convert apex and apex_test modules at this time |
| if ctx.ModuleType() != "apex" && ctx.ModuleType() != "apex_test" { |
| return |
| } |
| |
| attrs, props, commonAttrs := convertWithBp2build(a, ctx) |
| commonAttrs.Name = a.Name() |
| ctx.CreateBazelTargetModule(props, commonAttrs, &attrs) |
| } |
| |
| func convertWithBp2build(a *apexBundle, ctx android.TopDownMutatorContext) (bazelApexBundleAttributes, bazel.BazelTargetModuleProperties, android.CommonAttributes) { |
| var manifestLabelAttribute bazel.LabelAttribute |
| manifestLabelAttribute.SetValue(android.BazelLabelForModuleSrcSingle(ctx, proptools.StringDefault(a.properties.Manifest, "apex_manifest.json"))) |
| |
| var androidManifestLabelAttribute bazel.LabelAttribute |
| if a.properties.AndroidManifest != nil { |
| androidManifestLabelAttribute.SetValue(android.BazelLabelForModuleSrcSingle(ctx, *a.properties.AndroidManifest)) |
| } |
| |
| var fileContextsLabelAttribute bazel.LabelAttribute |
| if a.properties.File_contexts == nil { |
| // See buildFileContexts(), if file_contexts is not specified the default one is used, which is //system/sepolicy/apex:<module name>-file_contexts |
| fileContextsLabelAttribute.SetValue(android.BazelLabelForModuleDepSingle(ctx, a.Name()+"-file_contexts")) |
| } else if strings.HasPrefix(*a.properties.File_contexts, ":") { |
| // File_contexts is a module |
| fileContextsLabelAttribute.SetValue(android.BazelLabelForModuleDepSingle(ctx, *a.properties.File_contexts)) |
| } else { |
| // File_contexts is a file |
| fileContextsLabelAttribute.SetValue(android.BazelLabelForModuleSrcSingle(ctx, *a.properties.File_contexts)) |
| } |
| |
| var cannedFsConfigAttribute bazel.LabelAttribute |
| if a.properties.Canned_fs_config != nil { |
| cannedFsConfigAttribute.SetValue(android.BazelLabelForModuleSrcSingle(ctx, *a.properties.Canned_fs_config)) |
| } |
| |
| productVariableProps := android.ProductVariableProperties(ctx, a) |
| // TODO(b/219503907) this would need to be set to a.MinSdkVersionValue(ctx) but |
| // given it's coming via config, we probably don't want to put it in here. |
| var minSdkVersion bazel.StringAttribute |
| if a.properties.Min_sdk_version != nil { |
| minSdkVersion.SetValue(*a.properties.Min_sdk_version) |
| } |
| if props, ok := productVariableProps[minSdkVersionPropName]; ok { |
| for c, p := range props { |
| if val, ok := p.(*string); ok { |
| minSdkVersion.SetSelectValue(c.ConfigurationAxis(), c.SelectKey(), val) |
| } |
| } |
| } |
| |
| var keyLabelAttribute bazel.LabelAttribute |
| if a.overridableProperties.Key != nil { |
| keyLabelAttribute.SetValue(android.BazelLabelForModuleDepSingle(ctx, *a.overridableProperties.Key)) |
| } |
| |
| // Certificate |
| certificate, certificateName := android.BazelStringOrLabelFromProp(ctx, a.overridableProperties.Certificate) |
| |
| nativeSharedLibs := &convertedNativeSharedLibs{ |
| Native_shared_libs_32: bazel.LabelListAttribute{}, |
| Native_shared_libs_64: bazel.LabelListAttribute{}, |
| } |
| |
| // https://cs.android.com/android/platform/superproject/+/master:build/soong/android/arch.go;l=698;drc=f05b0d35d2fbe51be9961ce8ce8031f840295c68 |
| // https://cs.android.com/android/platform/superproject/+/master:build/soong/apex/apex.go;l=2549;drc=ec731a83e3e2d80a1254e32fd4ad7ef85e262669 |
| // In Soong, decodeMultilib, used to get multilib, return "first" if defaultMultilib is set to "common". |
| // Since apex sets defaultMultilib to be "common", equivalent compileMultilib in bp2build for apex should be "first" |
| compileMultilib := "first" |
| if a.CompileMultilib() != nil { |
| compileMultilib = *a.CompileMultilib() |
| } |
| |
| // properties.Native_shared_libs is treated as "both" |
| convertBothLibs(ctx, compileMultilib, a.properties.Native_shared_libs, nativeSharedLibs) |
| convertBothLibs(ctx, compileMultilib, a.properties.Multilib.Both.Native_shared_libs, nativeSharedLibs) |
| convert32Libs(ctx, compileMultilib, a.properties.Multilib.Lib32.Native_shared_libs, nativeSharedLibs) |
| convert64Libs(ctx, compileMultilib, a.properties.Multilib.Lib64.Native_shared_libs, nativeSharedLibs) |
| convertFirstLibs(ctx, compileMultilib, a.properties.Multilib.First.Native_shared_libs, nativeSharedLibs) |
| |
| prebuilts := a.overridableProperties.Prebuilts |
| prebuiltsLabelList := android.BazelLabelForModuleDeps(ctx, prebuilts) |
| prebuiltsLabelListAttribute := bazel.MakeLabelListAttribute(prebuiltsLabelList) |
| |
| binaries := android.BazelLabelForModuleDeps(ctx, a.properties.ApexNativeDependencies.Binaries) |
| binariesLabelListAttribute := bazel.MakeLabelListAttribute(binaries) |
| |
| var testsAttrs bazel.LabelListAttribute |
| if a.testApex && len(a.properties.ApexNativeDependencies.Tests) > 0 { |
| tests := android.BazelLabelForModuleDeps(ctx, a.properties.ApexNativeDependencies.Tests) |
| testsAttrs = bazel.MakeLabelListAttribute(tests) |
| } |
| |
| var updatableAttribute bazel.BoolAttribute |
| if a.properties.Updatable != nil { |
| updatableAttribute.Value = a.properties.Updatable |
| } |
| |
| var installableAttribute bazel.BoolAttribute |
| if a.properties.Installable != nil { |
| installableAttribute.Value = a.properties.Installable |
| } |
| |
| var compressibleAttribute bazel.BoolAttribute |
| if a.overridableProperties.Compressible != nil { |
| compressibleAttribute.Value = a.overridableProperties.Compressible |
| } |
| |
| var packageName *string |
| if a.overridableProperties.Package_name != "" { |
| packageName = &a.overridableProperties.Package_name |
| } |
| |
| var loggingParent *string |
| if a.overridableProperties.Logging_parent != "" { |
| loggingParent = &a.overridableProperties.Logging_parent |
| } |
| |
| attrs := bazelApexBundleAttributes{ |
| Manifest: manifestLabelAttribute, |
| Android_manifest: androidManifestLabelAttribute, |
| File_contexts: fileContextsLabelAttribute, |
| Canned_fs_config: cannedFsConfigAttribute, |
| Min_sdk_version: minSdkVersion, |
| Key: keyLabelAttribute, |
| Certificate: certificate, |
| Certificate_name: certificateName, |
| Updatable: updatableAttribute, |
| Installable: installableAttribute, |
| Native_shared_libs_32: nativeSharedLibs.Native_shared_libs_32, |
| Native_shared_libs_64: nativeSharedLibs.Native_shared_libs_64, |
| Binaries: binariesLabelListAttribute, |
| Prebuilts: prebuiltsLabelListAttribute, |
| Compressible: compressibleAttribute, |
| Package_name: packageName, |
| Logging_parent: loggingParent, |
| Tests: testsAttrs, |
| Apex_available_name: a.properties.Apex_available_name, |
| Variant_version: a.properties.Variant_version, |
| } |
| |
| props := bazel.BazelTargetModuleProperties{ |
| Rule_class: "apex", |
| Bzl_load_location: "//build/bazel/rules/apex:apex.bzl", |
| } |
| |
| commonAttrs := android.CommonAttributes{} |
| if a.testApex { |
| commonAttrs.Testonly = proptools.BoolPtr(true) |
| // Set the api_domain of the test apex |
| attrs.Base_apex_name = proptools.StringPtr(cc.GetApiDomain(a.Name())) |
| } |
| |
| return attrs, props, commonAttrs |
| } |
| |
| // The following conversions are based on this table where the rows are the compile_multilib |
| // values and the columns are the properties.Multilib.*.Native_shared_libs. Each cell |
| // represents how the libs should be compiled for a 64-bit/32-bit device: 32 means it |
| // should be compiled as 32-bit, 64 means it should be compiled as 64-bit, none means it |
| // should not be compiled. |
| // multib/compile_multilib, 32, 64, both, first |
| // 32, 32/32, none/none, 32/32, none/32 |
| // 64, none/none, 64/none, 64/none, 64/none |
| // both, 32/32, 64/none, 32&64/32, 64/32 |
| // first, 32/32, 64/none, 64/32, 64/32 |
| |
| func convert32Libs(ctx android.TopDownMutatorContext, compileMultilb string, |
| libs []string, nativeSharedLibs *convertedNativeSharedLibs) { |
| libsLabelList := android.BazelLabelForModuleDeps(ctx, libs) |
| switch compileMultilb { |
| case "both", "32": |
| makeNoConfig32SharedLibsAttributes(libsLabelList, nativeSharedLibs) |
| case "first": |
| make32SharedLibsAttributes(libsLabelList, nativeSharedLibs) |
| case "64": |
| // Incompatible, ignore |
| default: |
| invalidCompileMultilib(ctx, compileMultilb) |
| } |
| } |
| |
| func convert64Libs(ctx android.TopDownMutatorContext, compileMultilb string, |
| libs []string, nativeSharedLibs *convertedNativeSharedLibs) { |
| libsLabelList := android.BazelLabelForModuleDeps(ctx, libs) |
| switch compileMultilb { |
| case "both", "64", "first": |
| make64SharedLibsAttributes(libsLabelList, nativeSharedLibs) |
| case "32": |
| // Incompatible, ignore |
| default: |
| invalidCompileMultilib(ctx, compileMultilb) |
| } |
| } |
| |
| func convertBothLibs(ctx android.TopDownMutatorContext, compileMultilb string, |
| libs []string, nativeSharedLibs *convertedNativeSharedLibs) { |
| libsLabelList := android.BazelLabelForModuleDeps(ctx, libs) |
| switch compileMultilb { |
| case "both": |
| makeNoConfig32SharedLibsAttributes(libsLabelList, nativeSharedLibs) |
| make64SharedLibsAttributes(libsLabelList, nativeSharedLibs) |
| case "first": |
| makeFirstSharedLibsAttributes(libsLabelList, nativeSharedLibs) |
| case "32": |
| makeNoConfig32SharedLibsAttributes(libsLabelList, nativeSharedLibs) |
| case "64": |
| make64SharedLibsAttributes(libsLabelList, nativeSharedLibs) |
| default: |
| invalidCompileMultilib(ctx, compileMultilb) |
| } |
| } |
| |
| func convertFirstLibs(ctx android.TopDownMutatorContext, compileMultilb string, |
| libs []string, nativeSharedLibs *convertedNativeSharedLibs) { |
| libsLabelList := android.BazelLabelForModuleDeps(ctx, libs) |
| switch compileMultilb { |
| case "both", "first": |
| makeFirstSharedLibsAttributes(libsLabelList, nativeSharedLibs) |
| case "32": |
| make32SharedLibsAttributes(libsLabelList, nativeSharedLibs) |
| case "64": |
| make64SharedLibsAttributes(libsLabelList, nativeSharedLibs) |
| default: |
| invalidCompileMultilib(ctx, compileMultilb) |
| } |
| } |
| |
| func makeFirstSharedLibsAttributes(libsLabelList bazel.LabelList, nativeSharedLibs *convertedNativeSharedLibs) { |
| make32SharedLibsAttributes(libsLabelList, nativeSharedLibs) |
| make64SharedLibsAttributes(libsLabelList, nativeSharedLibs) |
| } |
| |
| func makeNoConfig32SharedLibsAttributes(libsLabelList bazel.LabelList, nativeSharedLibs *convertedNativeSharedLibs) { |
| list := bazel.LabelListAttribute{} |
| list.SetSelectValue(bazel.NoConfigAxis, "", libsLabelList) |
| nativeSharedLibs.Native_shared_libs_32.Append(list) |
| } |
| |
| func make32SharedLibsAttributes(libsLabelList bazel.LabelList, nativeSharedLibs *convertedNativeSharedLibs) { |
| makeSharedLibsAttributes("x86", libsLabelList, &nativeSharedLibs.Native_shared_libs_32) |
| makeSharedLibsAttributes("arm", libsLabelList, &nativeSharedLibs.Native_shared_libs_32) |
| } |
| |
| func make64SharedLibsAttributes(libsLabelList bazel.LabelList, nativeSharedLibs *convertedNativeSharedLibs) { |
| makeSharedLibsAttributes("x86_64", libsLabelList, &nativeSharedLibs.Native_shared_libs_64) |
| makeSharedLibsAttributes("arm64", libsLabelList, &nativeSharedLibs.Native_shared_libs_64) |
| } |
| |
| func makeSharedLibsAttributes(config string, libsLabelList bazel.LabelList, |
| labelListAttr *bazel.LabelListAttribute) { |
| list := bazel.LabelListAttribute{} |
| list.SetSelectValue(bazel.ArchConfigurationAxis, config, libsLabelList) |
| labelListAttr.Append(list) |
| } |
| |
| func invalidCompileMultilib(ctx android.TopDownMutatorContext, value string) { |
| ctx.PropertyErrorf("compile_multilib", "Invalid value: %s", value) |
| } |
| |
| func (a *apexBundle) IsTestApex() bool { |
| return a.testApex |
| } |
| |
| func (a *apexBundle) useVndkAsStable(ctx android.BaseModuleContext) bool { |
| // VNDK cannot be linked if it is deprecated |
| if ctx.Config().IsVndkDeprecated() { |
| return false |
| } |
| |
| return proptools.Bool(a.properties.Use_vndk_as_stable) |
| } |