| # Put some miscellaneous rules here |
| |
| # HACK: clear LOCAL_PATH from including last build target before calling |
| # intermedites-dir-for |
| LOCAL_PATH := $(BUILD_SYSTEM) |
| |
| # ----------------------------------------------------------------- |
| # Define rules to copy PRODUCT_COPY_FILES defined by the product. |
| # PRODUCT_COPY_FILES contains words like <source file>:<dest file>[:<owner>]. |
| # <dest file> is relative to $(PRODUCT_OUT), so it should look like, |
| # e.g., "system/etc/file.xml". |
| # The filter part means "only eval the copy-one-file rule if this |
| # src:dest pair is the first one to match the same dest" |
| #$(1): the src:dest pair |
| #$(2): the dest |
| define check-product-copy-files |
| $(if $(filter-out $(TARGET_COPY_OUT_SYSTEM_OTHER)/%,$(2)), \ |
| $(if $(filter %.apk, $(2)),$(error \ |
| Prebuilt apk found in PRODUCT_COPY_FILES: $(1), use BUILD_PREBUILT instead!))) \ |
| $(if $(filter true,$(BUILD_BROKEN_VINTF_PRODUCT_COPY_FILES)),, \ |
| $(if $(filter $(TARGET_COPY_OUT_SYSTEM)/etc/vintf/% \ |
| $(TARGET_COPY_OUT_SYSTEM)/manifest.xml \ |
| $(TARGET_COPY_OUT_SYSTEM)/compatibility_matrix.xml,$(2)), \ |
| $(error VINTF metadata found in PRODUCT_COPY_FILES: $(1), use vintf_fragments instead!)) \ |
| $(if $(filter $(TARGET_COPY_OUT_PRODUCT)/etc/vintf/%,$(2)), \ |
| $(error VINTF metadata found in PRODUCT_COPY_FILES: $(1), \ |
| use PRODUCT_MANIFEST_FILES / DEVICE_PRODUCT_COMPATIBILITY_MATRIX_FILE / vintf_compatibility_matrix / vintf_fragments instead!)) \ |
| $(if $(filter $(TARGET_COPY_OUT_SYSTEM_EXT)/etc/vintf/%,$(2)), \ |
| $(error VINTF metadata found in PRODUCT_COPY_FILES: $(1), \ |
| use vintf_compatibility_matrix / vintf_fragments instead!)) \ |
| $(if $(filter $(TARGET_COPY_OUT_VENDOR)/etc/vintf/% \ |
| $(TARGET_COPY_OUT_VENDOR)/manifest.xml \ |
| $(TARGET_COPY_OUT_VENDOR)/compatibility_matrix.xml,$(2)), \ |
| $(error VINTF metadata found in PRODUCT_COPY_FILES: $(1), \ |
| use DEVICE_MANIFEST_FILE / DEVICE_MATRIX_FILE / vintf_compatibility_matrix / vintf_fragments instead!)) \ |
| $(if $(filter $(TARGET_COPY_OUT_ODM)/etc/vintf/% \ |
| $(TARGET_COPY_OUT_ODM)/etc/manifest%,$(2)), \ |
| $(error VINTF metadata found in PRODUCT_COPY_FILES: $(1), \ |
| use ODM_MANIFEST_FILES / vintf_fragments instead!)) \ |
| ) |
| endef |
| # filter out the duplicate <source file>:<dest file> pairs. |
| unique_product_copy_files_pairs := |
| $(foreach cf,$(PRODUCT_COPY_FILES), \ |
| $(if $(filter $(unique_product_copy_files_pairs),$(cf)),,\ |
| $(eval unique_product_copy_files_pairs += $(cf)))) |
| unique_product_copy_files_destinations := |
| product_copy_files_ignored := |
| $(foreach cf,$(unique_product_copy_files_pairs), \ |
| $(eval _src := $(call word-colon,1,$(cf))) \ |
| $(eval _dest := $(call word-colon,2,$(cf))) \ |
| $(call check-product-copy-files,$(cf),$(_dest)) \ |
| $(if $(filter $(unique_product_copy_files_destinations),$(_dest)), \ |
| $(eval product_copy_files_ignored += $(cf)), \ |
| $(eval _fulldest := $(call append-path,$(PRODUCT_OUT),$(_dest))) \ |
| $(if $(filter %.xml,$(_dest)),\ |
| $(eval $(call copy-xml-file-checked,$(_src),$(_fulldest))),\ |
| $(if $(and $(filter %.jar,$(_dest)),$(filter $(basename $(notdir $(_dest))),$(PRODUCT_LOADED_BY_PRIVILEGED_MODULES))),\ |
| $(eval $(call copy-and-uncompress-dexs,$(_src),$(_fulldest))), \ |
| $(if $(filter init%rc,$(notdir $(_dest)))$(filter %/etc/init,$(dir $(_dest))),\ |
| $(eval $(call copy-init-script-file-checked,$(_src),$(_fulldest))),\ |
| $(eval $(call copy-one-file,$(_src),$(_fulldest)))))) \ |
| $(eval unique_product_copy_files_destinations += $(_dest)))) |
| |
| # Dump a list of overriden (and ignored PRODUCT_COPY_FILES entries) |
| pcf_ignored_file := $(PRODUCT_OUT)/product_copy_files_ignored.txt |
| $(pcf_ignored_file): PRIVATE_IGNORED := $(sort $(product_copy_files_ignored)) |
| $(pcf_ignored_file): |
| echo "$(PRIVATE_IGNORED)" | tr " " "\n" >$@ |
| |
| $(call dist-for-goals,droidcore,$(pcf_ignored_file):logs/$(notdir $(pcf_ignored_file))) |
| |
| pcf_ignored_file := |
| product_copy_files_ignored := |
| unique_product_copy_files_pairs := |
| unique_product_copy_files_destinations := |
| |
| # ----------------------------------------------------------------- |
| # Returns the max allowed size for an image suitable for hash verification |
| # (e.g., boot.img, recovery.img, etc). |
| # The value 69632 derives from MAX_VBMETA_SIZE + MAX_FOOTER_SIZE in $(AVBTOOL). |
| # $(1): partition size to flash the image |
| define get-hash-image-max-size |
| $(if $(1), \ |
| $(if $(filter true,$(BOARD_AVB_ENABLE)), \ |
| $(eval _hash_meta_size := 69632), \ |
| $(eval _hash_meta_size := 0)) \ |
| $(1)-$(_hash_meta_size)) |
| endef |
| |
| # ----------------------------------------------------------------- |
| # Define rules to copy headers defined in copy_headers.mk |
| # If more than one makefile declared a header, print a warning, |
| # then copy the last one defined. This matches the previous make |
| # behavior. |
| has_dup_copy_headers := |
| $(foreach dest,$(ALL_COPIED_HEADERS), \ |
| $(eval _srcs := $(ALL_COPIED_HEADERS.$(dest).SRC)) \ |
| $(eval _src := $(lastword $(_srcs))) \ |
| $(if $(call streq,$(_src),$(_srcs)),, \ |
| $(warning Duplicate header copy: $(dest)) \ |
| $(warning _ Using $(_src)) \ |
| $(warning __ from $(lastword $(ALL_COPIED_HEADERS.$(dest).MAKEFILE))) \ |
| $(eval _makefiles := $$(wordlist 1,$(call int_subtract,$(words $(ALL_COPIED_HEADERS.$(dest).MAKEFILE)),1),$$(ALL_COPIED_HEADERS.$$(dest).MAKEFILE))) \ |
| $(foreach src,$(wordlist 1,$(call int_subtract,$(words $(_srcs)),1),$(_srcs)), \ |
| $(warning _ Ignoring $(src)) \ |
| $(warning __ from $(firstword $(_makefiles))) \ |
| $(eval _makefiles := $$(wordlist 2,9999,$$(_makefiles)))) \ |
| $(eval has_dup_copy_headers := true)) \ |
| $(eval $(call copy-one-header,$(_src),$(dest)))) |
| all_copied_headers: $(ALL_COPIED_HEADERS) |
| |
| ifdef has_dup_copy_headers |
| has_dup_copy_headers := |
| $(error duplicate header copies are no longer allowed. For more information about headers, see: https://android.googlesource.com/platform/build/soong/+/master/docs/best_practices.md#headers) |
| endif |
| |
| $(file >$(PRODUCT_OUT)/.copied_headers_list,$(TARGET_OUT_HEADERS) $(ALL_COPIED_HEADERS)) |
| |
| # ----------------------------------------------------------------- |
| # docs/index.html |
| ifeq (,$(TARGET_BUILD_APPS)) |
| gen := $(OUT_DOCS)/index.html |
| ALL_DOCS += $(gen) |
| $(gen): frameworks/base/docs/docs-redirect-index.html |
| @mkdir -p $(dir $@) |
| @cp -f $< $@ |
| endif |
| |
| ndk_doxygen_out := $(OUT_NDK_DOCS) |
| ndk_headers := $(SOONG_OUT_DIR)/ndk/sysroot/usr/include |
| ndk_docs_src_dir := frameworks/native/docs |
| ndk_doxyfile := $(ndk_docs_src_dir)/Doxyfile |
| ifneq ($(wildcard $(ndk_docs_src_dir)),) |
| ndk_docs_srcs := $(addprefix $(ndk_docs_src_dir)/,\ |
| $(call find-files-in-subdirs,$(ndk_docs_src_dir),"*",.)) |
| $(ndk_doxygen_out)/index.html: $(ndk_docs_srcs) $(SOONG_OUT_DIR)/ndk.timestamp |
| @mkdir -p $(ndk_doxygen_out) |
| @echo "Generating NDK docs to $(ndk_doxygen_out)" |
| @( cat $(ndk_doxyfile); \ |
| echo "INPUT=$(ndk_headers)"; \ |
| echo "HTML_OUTPUT=$(ndk_doxygen_out)" \ |
| ) | doxygen - |
| |
| # Note: Not a part of the docs target because we don't have doxygen available. |
| # You can run this target locally if you have doxygen installed. |
| ndk-docs: $(ndk_doxygen_out)/index.html |
| .PHONY: ndk-docs |
| endif |
| |
| $(call dist-for-goals,sdk,$(API_FINGERPRINT)) |
| |
| # ----------------------------------------------------------------- |
| # property_overrides_split_enabled |
| property_overrides_split_enabled := |
| ifeq ($(BOARD_PROPERTY_OVERRIDES_SPLIT_ENABLED), true) |
| property_overrides_split_enabled := true |
| endif |
| |
| # ----------------------------------------------------------------- |
| # FINAL_VENDOR_DEFAULT_PROPERTIES will be installed in vendor/default.prop if |
| # property_overrides_split_enabled is true. Otherwise it will be installed in |
| # ROOT/default.prop. |
| ifdef BOARD_VNDK_VERSION |
| ifeq ($(BOARD_VNDK_VERSION),current) |
| FINAL_VENDOR_DEFAULT_PROPERTIES := ro.vndk.version=$(PLATFORM_VNDK_VERSION) |
| else |
| FINAL_VENDOR_DEFAULT_PROPERTIES := ro.vndk.version=$(BOARD_VNDK_VERSION) |
| endif |
| ifdef BOARD_VNDK_RUNTIME_DISABLE |
| FINAL_VENDOR_DEFAULT_PROPERTIES += ro.vndk.lite=true |
| endif |
| else |
| FINAL_VENDOR_DEFAULT_PROPERTIES := ro.vndk.version=$(PLATFORM_VNDK_VERSION) |
| FINAL_VENDOR_DEFAULT_PROPERTIES += ro.vndk.lite=true |
| endif |
| FINAL_VENDOR_DEFAULT_PROPERTIES += \ |
| $(call collapse-pairs, $(PRODUCT_DEFAULT_PROPERTY_OVERRIDES)) |
| |
| # Add cpu properties for bionic and ART. |
| FINAL_VENDOR_DEFAULT_PROPERTIES += ro.bionic.arch=$(TARGET_ARCH) |
| FINAL_VENDOR_DEFAULT_PROPERTIES += ro.bionic.cpu_variant=$(TARGET_CPU_VARIANT_RUNTIME) |
| FINAL_VENDOR_DEFAULT_PROPERTIES += ro.bionic.2nd_arch=$(TARGET_2ND_ARCH) |
| FINAL_VENDOR_DEFAULT_PROPERTIES += ro.bionic.2nd_cpu_variant=$(TARGET_2ND_CPU_VARIANT_RUNTIME) |
| |
| FINAL_VENDOR_DEFAULT_PROPERTIES += persist.sys.dalvik.vm.lib.2=libart.so |
| FINAL_VENDOR_DEFAULT_PROPERTIES += dalvik.vm.isa.$(TARGET_ARCH).variant=$(DEX2OAT_TARGET_CPU_VARIANT_RUNTIME) |
| ifneq ($(DEX2OAT_TARGET_INSTRUCTION_SET_FEATURES),) |
| FINAL_VENDOR_DEFAULT_PROPERTIES += dalvik.vm.isa.$(TARGET_ARCH).features=$(DEX2OAT_TARGET_INSTRUCTION_SET_FEATURES) |
| endif |
| |
| ifdef TARGET_2ND_ARCH |
| FINAL_VENDOR_DEFAULT_PROPERTIES += dalvik.vm.isa.$(TARGET_2ND_ARCH).variant=$($(TARGET_2ND_ARCH_VAR_PREFIX)DEX2OAT_TARGET_CPU_VARIANT_RUNTIME) |
| ifneq ($($(TARGET_2ND_ARCH_VAR_PREFIX)DEX2OAT_TARGET_INSTRUCTION_SET_FEATURES),) |
| FINAL_VENDOR_DEFAULT_PROPERTIES += dalvik.vm.isa.$(TARGET_2ND_ARCH).features=$($(TARGET_2ND_ARCH_VAR_PREFIX)DEX2OAT_TARGET_INSTRUCTION_SET_FEATURES) |
| endif |
| endif |
| |
| # Although these variables are prefixed with TARGET_RECOVERY_, they are also needed under charger |
| # mode (via libminui). |
| ifdef TARGET_RECOVERY_DEFAULT_ROTATION |
| FINAL_VENDOR_DEFAULT_PROPERTIES += \ |
| ro.minui.default_rotation=$(TARGET_RECOVERY_DEFAULT_ROTATION) |
| endif |
| ifdef TARGET_RECOVERY_OVERSCAN_PERCENT |
| FINAL_VENDOR_DEFAULT_PROPERTIES += \ |
| ro.minui.overscan_percent=$(TARGET_RECOVERY_OVERSCAN_PERCENT) |
| endif |
| ifdef TARGET_RECOVERY_PIXEL_FORMAT |
| FINAL_VENDOR_DEFAULT_PROPERTIES += \ |
| ro.minui.pixel_format=$(TARGET_RECOVERY_PIXEL_FORMAT) |
| endif |
| FINAL_VENDOR_DEFAULT_PROPERTIES := $(call uniq-pairs-by-first-component, \ |
| $(FINAL_VENDOR_DEFAULT_PROPERTIES),=) |
| |
| # ----------------------------------------------------------------- |
| # prop.default |
| |
| BUILDINFO_SH := build/make/tools/buildinfo.sh |
| BUILDINFO_COMMON_SH := build/make/tools/buildinfo_common.sh |
| POST_PROCESS_PROPS :=$= build/make/tools/post_process_props.py |
| |
| # Generates a set of sysprops common to all partitions to a file. |
| # $(1): Partition name |
| # $(2): Output file name |
| define generate-common-build-props |
| PRODUCT_BRAND="$(PRODUCT_BRAND)" \ |
| PRODUCT_DEVICE="$(TARGET_DEVICE)" \ |
| PRODUCT_MANUFACTURER="$(PRODUCT_MANUFACTURER)" \ |
| PRODUCT_MODEL="$(PRODUCT_MODEL)" \ |
| PRODUCT_NAME="$(TARGET_PRODUCT)" \ |
| $(call generate-common-build-props-with-product-vars-set,$(1),$(2)) |
| endef |
| |
| # Like the above macro, but requiring the relevant PRODUCT_ environment |
| # variables to be set when called. |
| define generate-common-build-props-with-product-vars-set |
| BUILD_FINGERPRINT="$(BUILD_FINGERPRINT_FROM_FILE)" \ |
| BUILD_ID="$(BUILD_ID)" \ |
| BUILD_NUMBER="$(BUILD_NUMBER_FROM_FILE)" \ |
| BUILD_VERSION_TAGS="$(BUILD_VERSION_TAGS)" \ |
| DATE="$(DATE_FROM_FILE)" \ |
| PLATFORM_SDK_VERSION="$(PLATFORM_SDK_VERSION)" \ |
| PLATFORM_VERSION="$(PLATFORM_VERSION)" \ |
| TARGET_BUILD_TYPE="$(TARGET_BUILD_VARIANT)" \ |
| bash $(BUILDINFO_COMMON_SH) "$(1)" >> $(2) |
| endef |
| |
| ifdef property_overrides_split_enabled |
| INSTALLED_DEFAULT_PROP_TARGET := $(TARGET_OUT)/etc/prop.default |
| INSTALLED_DEFAULT_PROP_OLD_TARGET := $(TARGET_ROOT_OUT)/default.prop |
| ALL_DEFAULT_INSTALLED_MODULES += $(INSTALLED_DEFAULT_PROP_OLD_TARGET) |
| $(INSTALLED_DEFAULT_PROP_OLD_TARGET): $(INSTALLED_DEFAULT_PROP_TARGET) |
| else |
| # legacy path |
| INSTALLED_DEFAULT_PROP_TARGET := $(TARGET_ROOT_OUT)/default.prop |
| endif |
| ALL_DEFAULT_INSTALLED_MODULES += $(INSTALLED_DEFAULT_PROP_TARGET) |
| FINAL_DEFAULT_PROPERTIES := \ |
| $(call collapse-pairs, $(ADDITIONAL_DEFAULT_PROPERTIES)) \ |
| $(call collapse-pairs, $(PRODUCT_SYSTEM_DEFAULT_PROPERTIES)) |
| ifndef property_overrides_split_enabled |
| FINAL_DEFAULT_PROPERTIES += \ |
| $(call collapse-pairs, $(FINAL_VENDOR_DEFAULT_PROPERTIES)) |
| endif |
| FINAL_DEFAULT_PROPERTIES := $(call uniq-pairs-by-first-component, \ |
| $(FINAL_DEFAULT_PROPERTIES),=) |
| |
| intermediate_system_build_prop := $(call intermediates-dir-for,ETC,system_build_prop)/build.prop |
| |
| $(INSTALLED_DEFAULT_PROP_TARGET): $(BUILDINFO_COMMON_SH) $(POST_PROCESS_PROPS) $(intermediate_system_build_prop) |
| @echo Target buildinfo: $@ |
| @mkdir -p $(dir $@) |
| @rm -f $@ |
| $(hide) echo "#" > $@; \ |
| echo "# ADDITIONAL_DEFAULT_PROPERTIES" >> $@; \ |
| echo "#" >> $@; |
| $(hide) $(foreach line,$(FINAL_DEFAULT_PROPERTIES), \ |
| echo "$(line)" >> $@;) |
| $(hide) $(POST_PROCESS_PROPS) $@ |
| ifdef property_overrides_split_enabled |
| $(hide) mkdir -p $(TARGET_ROOT_OUT) |
| $(hide) ln -sf system/etc/prop.default $(INSTALLED_DEFAULT_PROP_OLD_TARGET) |
| endif |
| |
| # ----------------------------------------------------------------- |
| # vendor default.prop |
| INSTALLED_VENDOR_DEFAULT_PROP_TARGET := |
| ifdef property_overrides_split_enabled |
| INSTALLED_VENDOR_DEFAULT_PROP_TARGET := $(TARGET_OUT_VENDOR)/default.prop |
| ALL_DEFAULT_INSTALLED_MODULES += $(INSTALLED_VENDOR_DEFAULT_PROP_TARGET) |
| |
| $(INSTALLED_VENDOR_DEFAULT_PROP_TARGET): $(INSTALLED_DEFAULT_PROP_TARGET) $(POST_PROCESS_PROPS) |
| @echo Target buildinfo: $@ |
| @mkdir -p $(dir $@) |
| $(hide) echo "#" > $@; \ |
| echo "# ADDITIONAL VENDOR DEFAULT PROPERTIES" >> $@; \ |
| echo "#" >> $@; |
| $(hide) $(foreach line,$(FINAL_VENDOR_DEFAULT_PROPERTIES), \ |
| echo "$(line)" >> $@;) |
| $(hide) $(POST_PROCESS_PROPS) $@ |
| |
| endif # property_overrides_split_enabled |
| |
| # ----------------------------------------------------------------- |
| # build.prop |
| INSTALLED_BUILD_PROP_TARGET := $(TARGET_OUT)/build.prop |
| ALL_DEFAULT_INSTALLED_MODULES += $(INSTALLED_BUILD_PROP_TARGET) |
| FINAL_BUILD_PROPERTIES := \ |
| $(call collapse-pairs, $(ADDITIONAL_BUILD_PROPERTIES)) |
| FINAL_BUILD_PROPERTIES := $(call uniq-pairs-by-first-component, \ |
| $(FINAL_BUILD_PROPERTIES),=) |
| |
| # A list of arbitrary tags describing the build configuration. |
| # Force ":=" so we can use += |
| BUILD_VERSION_TAGS := $(BUILD_VERSION_TAGS) |
| ifeq ($(TARGET_BUILD_TYPE),debug) |
| BUILD_VERSION_TAGS += debug |
| endif |
| # The "test-keys" tag marks builds signed with the old test keys, |
| # which are available in the SDK. "dev-keys" marks builds signed with |
| # non-default dev keys (usually private keys from a vendor directory). |
| # Both of these tags will be removed and replaced with "release-keys" |
| # when the target-files is signed in a post-build step. |
| ifeq ($(DEFAULT_SYSTEM_DEV_CERTIFICATE),build/make/target/product/security/testkey) |
| BUILD_KEYS := test-keys |
| else |
| BUILD_KEYS := dev-keys |
| endif |
| BUILD_VERSION_TAGS += $(BUILD_KEYS) |
| BUILD_VERSION_TAGS := $(subst $(space),$(comma),$(sort $(BUILD_VERSION_TAGS))) |
| |
| # A human-readable string that descibes this build in detail. |
| build_desc := $(TARGET_PRODUCT)-$(TARGET_BUILD_VARIANT) $(PLATFORM_VERSION) $(BUILD_ID) $(BUILD_NUMBER_FROM_FILE) $(BUILD_VERSION_TAGS) |
| $(intermediate_system_build_prop): PRIVATE_BUILD_DESC := $(build_desc) |
| |
| # The string used to uniquely identify the combined build and product; used by the OTA server. |
| ifeq (,$(strip $(BUILD_FINGERPRINT))) |
| ifeq ($(strip $(HAS_BUILD_NUMBER)),false) |
| BF_BUILD_NUMBER := $(BUILD_USERNAME)$$($(DATE_FROM_FILE) +%m%d%H%M) |
| else |
| BF_BUILD_NUMBER := $(file <$(BUILD_NUMBER_FILE)) |
| endif |
| BUILD_FINGERPRINT := $(PRODUCT_BRAND)/$(TARGET_PRODUCT)/$(TARGET_DEVICE):$(PLATFORM_VERSION)/$(BUILD_ID)/$(BF_BUILD_NUMBER):$(TARGET_BUILD_VARIANT)/$(BUILD_VERSION_TAGS) |
| endif |
| # unset it for safety. |
| BF_BUILD_NUMBER := |
| |
| BUILD_FINGERPRINT_FILE := $(PRODUCT_OUT)/build_fingerprint.txt |
| ifneq (,$(shell mkdir -p $(PRODUCT_OUT) && echo $(BUILD_FINGERPRINT) >$(BUILD_FINGERPRINT_FILE) && grep " " $(BUILD_FINGERPRINT_FILE))) |
| $(error BUILD_FINGERPRINT cannot contain spaces: "$(file <$(BUILD_FINGERPRINT_FILE))") |
| endif |
| BUILD_FINGERPRINT_FROM_FILE := $$(cat $(BUILD_FINGERPRINT_FILE)) |
| # unset it for safety. |
| BUILD_FINGERPRINT := |
| |
| # The string used to uniquely identify the system build; used by the OTA server. |
| # This purposefully excludes any product-specific variables. |
| ifeq (,$(strip $(BUILD_THUMBPRINT))) |
| BUILD_THUMBPRINT := $(PLATFORM_VERSION)/$(BUILD_ID)/$(BUILD_NUMBER_FROM_FILE):$(TARGET_BUILD_VARIANT)/$(BUILD_VERSION_TAGS) |
| endif |
| |
| BUILD_THUMBPRINT_FILE := $(PRODUCT_OUT)/build_thumbprint.txt |
| ifneq (,$(shell mkdir -p $(PRODUCT_OUT) && echo $(BUILD_THUMBPRINT) >$(BUILD_THUMBPRINT_FILE) && grep " " $(BUILD_THUMBPRINT_FILE))) |
| $(error BUILD_THUMBPRINT cannot contain spaces: "$(file <$(BUILD_THUMBPRINT_FILE))") |
| endif |
| BUILD_THUMBPRINT_FROM_FILE := $$(cat $(BUILD_THUMBPRINT_FILE)) |
| # unset it for safety. |
| BUILD_THUMBPRINT := |
| |
| KNOWN_OEM_THUMBPRINT_PROPERTIES := \ |
| ro.product.brand \ |
| ro.product.name \ |
| ro.product.device |
| OEM_THUMBPRINT_PROPERTIES := $(filter $(KNOWN_OEM_THUMBPRINT_PROPERTIES),\ |
| $(PRODUCT_OEM_PROPERTIES)) |
| |
| # Display parameters shown under Settings -> About Phone |
| ifeq ($(TARGET_BUILD_VARIANT),user) |
| # User builds should show: |
| # release build number or branch.buld_number non-release builds |
| |
| # Dev. branches should have DISPLAY_BUILD_NUMBER set |
| ifeq (true,$(DISPLAY_BUILD_NUMBER)) |
| BUILD_DISPLAY_ID := $(BUILD_ID).$(BUILD_NUMBER_FROM_FILE) $(BUILD_KEYS) |
| else |
| BUILD_DISPLAY_ID := $(BUILD_ID) $(BUILD_KEYS) |
| endif |
| else |
| # Non-user builds should show detailed build information |
| BUILD_DISPLAY_ID := $(build_desc) |
| endif |
| |
| # Accepts a whitespace separated list of product locales such as |
| # (en_US en_AU en_GB...) and returns the first locale in the list with |
| # underscores replaced with hyphens. In the example above, this will |
| # return "en-US". |
| define get-default-product-locale |
| $(strip $(subst _,-, $(firstword $(1)))) |
| endef |
| |
| # TARGET_BUILD_FLAVOR and ro.build.flavor are used only by the test |
| # harness to distinguish builds. Only add _asan for a sanitized build |
| # if it isn't already a part of the flavor (via a dedicated lunch |
| # config for example). |
| TARGET_BUILD_FLAVOR := $(TARGET_PRODUCT)-$(TARGET_BUILD_VARIANT) |
| ifneq (, $(filter address, $(SANITIZE_TARGET))) |
| ifeq (,$(findstring _asan,$(TARGET_BUILD_FLAVOR))) |
| TARGET_BUILD_FLAVOR := $(TARGET_BUILD_FLAVOR)_asan |
| endif |
| endif |
| |
| ifdef TARGET_SYSTEM_PROP |
| system_prop_file := $(TARGET_SYSTEM_PROP) |
| else |
| system_prop_file := $(wildcard $(TARGET_DEVICE_DIR)/system.prop) |
| endif |
| $(intermediate_system_build_prop): $(BUILDINFO_SH) $(BUILDINFO_COMMON_SH) $(INTERNAL_BUILD_ID_MAKEFILE) $(BUILD_SYSTEM)/version_defaults.mk $(system_prop_file) $(INSTALLED_ANDROID_INFO_TXT_TARGET) $(API_FINGERPRINT) $(POST_PROCESS_PROPS) |
| @echo Target buildinfo: $@ |
| @mkdir -p $(dir $@) |
| $(hide) rm -f $@ && touch $@ |
| ifneq ($(PRODUCT_OEM_PROPERTIES),) |
| $(hide) echo "#" >> $@; \ |
| echo "# PRODUCT_OEM_PROPERTIES" >> $@; \ |
| echo "#" >> $@; |
| $(hide) $(foreach prop,$(PRODUCT_OEM_PROPERTIES), \ |
| echo "import /oem/oem.prop $(prop)" >> $@;) |
| endif |
| $(hide) PRODUCT_BRAND="$(PRODUCT_SYSTEM_BRAND)" \ |
| PRODUCT_MANUFACTURER="$(PRODUCT_SYSTEM_MANUFACTURER)" \ |
| PRODUCT_MODEL="$(PRODUCT_SYSTEM_MODEL)" \ |
| PRODUCT_NAME="$(PRODUCT_SYSTEM_NAME)" \ |
| PRODUCT_DEVICE="$(PRODUCT_SYSTEM_DEVICE)" \ |
| $(call generate-common-build-props-with-product-vars-set,system,$@) |
| $(hide) TARGET_BUILD_TYPE="$(TARGET_BUILD_VARIANT)" \ |
| TARGET_BUILD_FLAVOR="$(TARGET_BUILD_FLAVOR)" \ |
| TARGET_DEVICE="$(TARGET_DEVICE)" \ |
| PRODUCT_DEFAULT_LOCALE="$(call get-default-product-locale,$(PRODUCT_LOCALES))" \ |
| PRODUCT_DEFAULT_WIFI_CHANNELS="$(PRODUCT_DEFAULT_WIFI_CHANNELS)" \ |
| PRIVATE_BUILD_DESC="$(PRIVATE_BUILD_DESC)" \ |
| BUILD_ID="$(BUILD_ID)" \ |
| BUILD_DISPLAY_ID="$(BUILD_DISPLAY_ID)" \ |
| DATE="$(DATE_FROM_FILE)" \ |
| BUILD_USERNAME="$(BUILD_USERNAME)" \ |
| BUILD_HOSTNAME="$(BUILD_HOSTNAME)" \ |
| BUILD_NUMBER="$(BUILD_NUMBER_FROM_FILE)" \ |
| BOARD_BUILD_SYSTEM_ROOT_IMAGE="$(BOARD_BUILD_SYSTEM_ROOT_IMAGE)" \ |
| PLATFORM_VERSION="$(PLATFORM_VERSION)" \ |
| PLATFORM_SECURITY_PATCH="$(PLATFORM_SECURITY_PATCH)" \ |
| PLATFORM_BASE_OS="$(PLATFORM_BASE_OS)" \ |
| PLATFORM_SDK_VERSION="$(PLATFORM_SDK_VERSION)" \ |
| PLATFORM_PREVIEW_SDK_VERSION="$(PLATFORM_PREVIEW_SDK_VERSION)" \ |
| PLATFORM_PREVIEW_SDK_FINGERPRINT="$$(cat $(API_FINGERPRINT))" \ |
| PLATFORM_VERSION_CODENAME="$(PLATFORM_VERSION_CODENAME)" \ |
| PLATFORM_VERSION_ALL_CODENAMES="$(PLATFORM_VERSION_ALL_CODENAMES)" \ |
| PLATFORM_MIN_SUPPORTED_TARGET_SDK_VERSION="$(PLATFORM_MIN_SUPPORTED_TARGET_SDK_VERSION)" \ |
| BUILD_VERSION_TAGS="$(BUILD_VERSION_TAGS)" \ |
| $(if $(OEM_THUMBPRINT_PROPERTIES),BUILD_THUMBPRINT="$(BUILD_THUMBPRINT_FROM_FILE)") \ |
| TARGET_CPU_ABI_LIST="$(TARGET_CPU_ABI_LIST)" \ |
| TARGET_CPU_ABI_LIST_32_BIT="$(TARGET_CPU_ABI_LIST_32_BIT)" \ |
| TARGET_CPU_ABI_LIST_64_BIT="$(TARGET_CPU_ABI_LIST_64_BIT)" \ |
| TARGET_CPU_ABI="$(TARGET_CPU_ABI)" \ |
| TARGET_CPU_ABI2="$(TARGET_CPU_ABI2)" \ |
| bash $(BUILDINFO_SH) >> $@ |
| $(hide) $(foreach file,$(system_prop_file), \ |
| if [ -f "$(file)" ]; then \ |
| echo Target buildinfo from: "$(file)"; \ |
| echo "" >> $@; \ |
| echo "#" >> $@; \ |
| echo "# from $(file)" >> $@; \ |
| echo "#" >> $@; \ |
| cat $(file) >> $@; \ |
| echo "# end of $(file)" >> $@; \ |
| fi;) |
| $(if $(FINAL_BUILD_PROPERTIES), \ |
| $(hide) echo >> $@; \ |
| echo "#" >> $@; \ |
| echo "# ADDITIONAL_BUILD_PROPERTIES" >> $@; \ |
| echo "#" >> $@; ) |
| $(hide) $(foreach line,$(FINAL_BUILD_PROPERTIES), \ |
| echo "$(line)" >> $@;) |
| $(hide) $(POST_PROCESS_PROPS) $@ $(PRODUCT_SYSTEM_PROPERTY_BLACKLIST) |
| |
| build_desc := |
| |
| INSTALLED_RECOVERYIMAGE_TARGET := |
| ifdef BUILDING_RECOVERY_IMAGE |
| ifneq ($(BOARD_USES_RECOVERY_AS_BOOT),true) |
| INSTALLED_RECOVERYIMAGE_TARGET := $(PRODUCT_OUT)/recovery.img |
| endif |
| endif |
| |
| $(INSTALLED_BUILD_PROP_TARGET): $(intermediate_system_build_prop) |
| @echo "Target build info: $@" |
| $(hide) grep -v 'ro.product.first_api_level' $(intermediate_system_build_prop) > $@ |
| |
| # ----------------------------------------------------------------- |
| # vendor build.prop |
| # |
| # For verifying that the vendor build is what we think it is |
| INSTALLED_VENDOR_BUILD_PROP_TARGET := $(TARGET_OUT_VENDOR)/build.prop |
| ALL_DEFAULT_INSTALLED_MODULES += $(INSTALLED_VENDOR_BUILD_PROP_TARGET) |
| |
| ifdef TARGET_VENDOR_PROP |
| vendor_prop_files := $(TARGET_VENDOR_PROP) |
| else |
| vendor_prop_files := $(wildcard $(TARGET_DEVICE_DIR)/vendor.prop) |
| endif |
| |
| ifdef property_overrides_split_enabled |
| FINAL_VENDOR_BUILD_PROPERTIES += \ |
| $(call collapse-pairs, $(PRODUCT_PROPERTY_OVERRIDES)) |
| FINAL_VENDOR_BUILD_PROPERTIES := $(call uniq-pairs-by-first-component, \ |
| $(FINAL_VENDOR_BUILD_PROPERTIES),=) |
| endif # property_overrides_split_enabled |
| |
| $(INSTALLED_VENDOR_BUILD_PROP_TARGET): $(BUILDINFO_COMMON_SH) $(POST_PROCESS_PROPS) $(intermediate_system_build_prop) $(vendor_prop_files) |
| @echo Target vendor buildinfo: $@ |
| @mkdir -p $(dir $@) |
| $(hide) rm -f $@ && touch $@ |
| ifeq ($(PRODUCT_USE_DYNAMIC_PARTITIONS),true) |
| $(hide) echo ro.boot.dynamic_partitions=true >> $@ |
| endif |
| ifeq ($(PRODUCT_RETROFIT_DYNAMIC_PARTITIONS),true) |
| $(hide) echo ro.boot.dynamic_partitions_retrofit=true >> $@ |
| endif |
| $(hide) grep 'ro.product.first_api_level' $(intermediate_system_build_prop) >> $@ || true |
| $(hide) echo ro.vendor.build.security_patch="$(VENDOR_SECURITY_PATCH)">>$@ |
| $(hide) echo ro.vendor.product.cpu.abilist="$(TARGET_CPU_ABI_LIST)">>$@ |
| $(hide) echo ro.vendor.product.cpu.abilist32="$(TARGET_CPU_ABI_LIST_32_BIT)">>$@ |
| $(hide) echo ro.vendor.product.cpu.abilist64="$(TARGET_CPU_ABI_LIST_64_BIT)">>$@ |
| $(hide) echo ro.product.board="$(TARGET_BOOTLOADER_BOARD_NAME)">>$@ |
| $(hide) echo ro.board.platform="$(TARGET_BOARD_PLATFORM)">>$@ |
| $(hide) echo ro.hwui.use_vulkan="$(TARGET_USES_VULKAN)">>$@ |
| ifdef TARGET_SCREEN_DENSITY |
| $(hide) echo ro.sf.lcd_density="$(TARGET_SCREEN_DENSITY)">>$@ |
| endif |
| ifeq ($(AB_OTA_UPDATER),true) |
| $(hide) echo ro.build.ab_update=true >> $@ |
| endif |
| $(hide) $(call generate-common-build-props,vendor,$@) |
| $(hide) echo "#" >> $@; \ |
| echo "# BOOTIMAGE_BUILD_PROPERTIES" >> $@; \ |
| echo "#" >> $@; |
| $(hide) echo ro.bootimage.build.date=`$(DATE_FROM_FILE)`>>$@ |
| $(hide) echo ro.bootimage.build.date.utc=`$(DATE_FROM_FILE) +%s`>>$@ |
| $(hide) echo ro.bootimage.build.fingerprint="$(BUILD_FINGERPRINT_FROM_FILE)">>$@ |
| $(hide) echo "#" >> $@; \ |
| echo "# ADDITIONAL VENDOR BUILD PROPERTIES" >> $@; \ |
| echo "#" >> $@; |
| $(hide) cat $(INSTALLED_ANDROID_INFO_TXT_TARGET) | grep 'require version-' | sed -e 's/require version-/ro.build.expect./g' >> $@ |
| ifdef property_overrides_split_enabled |
| $(hide) $(foreach file,$(vendor_prop_files), \ |
| if [ -f "$(file)" ]; then \ |
| echo Target vendor properties from: "$(file)"; \ |
| echo "" >> $@; \ |
| echo "#" >> $@; \ |
| echo "# from $(file)" >> $@; \ |
| echo "#" >> $@; \ |
| cat $(file) >> $@; \ |
| echo "# end of $(file)" >> $@; \ |
| fi;) |
| $(hide) $(foreach line,$(FINAL_VENDOR_BUILD_PROPERTIES), \ |
| echo "$(line)" >> $@;) |
| endif # property_overrides_split_enabled |
| $(hide) $(POST_PROCESS_PROPS) $@ $(PRODUCT_VENDOR_PROPERTY_BLACKLIST) |
| |
| # ----------------------------------------------------------------- |
| # product build.prop |
| INSTALLED_PRODUCT_BUILD_PROP_TARGET := $(TARGET_OUT_PRODUCT)/build.prop |
| ALL_DEFAULT_INSTALLED_MODULES += $(INSTALLED_PRODUCT_BUILD_PROP_TARGET) |
| |
| ifdef TARGET_PRODUCT_PROP |
| product_prop_files := $(TARGET_PRODUCT_PROP) |
| else |
| product_prop_files := $(wildcard $(TARGET_DEVICE_DIR)/product.prop) |
| endif |
| |
| FINAL_PRODUCT_PROPERTIES += \ |
| $(call collapse-pairs, $(PRODUCT_PRODUCT_PROPERTIES) $(ADDITIONAL_PRODUCT_PROPERTIES)) |
| FINAL_PRODUCT_PROPERTIES := $(call uniq-pairs-by-first-component, \ |
| $(FINAL_PRODUCT_PROPERTIES),=) |
| |
| $(INSTALLED_PRODUCT_BUILD_PROP_TARGET): $(BUILDINFO_COMMON_SH) $(POST_PROCESS_PROPS) $(product_prop_files) |
| @echo Target product buildinfo: $@ |
| @mkdir -p $(dir $@) |
| $(hide) rm -f $@ && touch $@ |
| ifdef BOARD_USES_PRODUCTIMAGE |
| $(hide) $(call generate-common-build-props,product,$@) |
| endif # BOARD_USES_PRODUCTIMAGE |
| $(hide) $(foreach file,$(product_prop_files), \ |
| if [ -f "$(file)" ]; then \ |
| echo Target product properties from: "$(file)"; \ |
| echo "" >> $@; \ |
| echo "#" >> $@; \ |
| echo "# from $(file)" >> $@; \ |
| echo "#" >> $@; \ |
| cat $(file) >> $@; \ |
| echo "# end of $(file)" >> $@; \ |
| fi;) |
| $(hide) echo "#" >> $@; \ |
| echo "# ADDITIONAL PRODUCT PROPERTIES" >> $@; \ |
| echo "#" >> $@; \ |
| echo "ro.build.characteristics=$(TARGET_AAPT_CHARACTERISTICS)" >> $@; |
| $(hide) $(foreach line,$(FINAL_PRODUCT_PROPERTIES), \ |
| echo "$(line)" >> $@;) |
| $(hide) $(POST_PROCESS_PROPS) $@ |
| |
| # ---------------------------------------------------------------- |
| # odm build.prop |
| INSTALLED_ODM_BUILD_PROP_TARGET := $(TARGET_OUT_ODM)/etc/build.prop |
| ALL_DEFAULT_INSTALLED_MODULES += $(INSTALLED_ODM_BUILD_PROP_TARGET) |
| |
| ifdef TARGET_ODM_PROP |
| odm_prop_files := $(TARGET_ODM_PROP) |
| else |
| odm_prop_files := $(wildcard $(TARGET_DEVICE_DIR)/odm.prop) |
| endif |
| |
| FINAL_ODM_BUILD_PROPERTIES += \ |
| $(call collapse-pairs, $(PRODUCT_ODM_PROPERTIES)) |
| FINAL_ODM_BUILD_PROPERTIES := $(call uniq-pairs-by-first-component, \ |
| $(FINAL_ODM_BUILD_PROPERTIES),=) |
| |
| $(INSTALLED_ODM_BUILD_PROP_TARGET): $(BUILDINFO_COMMON_SH) $(POST_PROCESS_PROPS) $(odm_prop_files) |
| @echo Target odm buildinfo: $@ |
| @mkdir -p $(dir $@) |
| $(hide) rm -f $@ && touch $@ |
| $(hide) echo ro.odm.product.cpu.abilist="$(TARGET_CPU_ABI_LIST)">>$@ |
| $(hide) echo ro.odm.product.cpu.abilist32="$(TARGET_CPU_ABI_LIST_32_BIT)">>$@ |
| $(hide) echo ro.odm.product.cpu.abilist64="$(TARGET_CPU_ABI_LIST_64_BIT)">>$@ |
| $(hide) $(call generate-common-build-props,odm,$@) |
| $(hide) $(foreach file,$(odm_prop_files), \ |
| if [ -f "$(file)" ]; then \ |
| echo Target odm properties from: "$(file)"; \ |
| echo "" >> $@; \ |
| echo "#" >> $@; \ |
| echo "# from $(file)" >> $@; \ |
| echo "#" >> $@; \ |
| cat $(file) >> $@; \ |
| echo "# end of $(file)" >> $@; \ |
| fi;) |
| $(hide) echo "#" >> $@; \ |
| echo "# ADDITIONAL ODM BUILD PROPERTIES" >> $@; \ |
| echo "#" >> $@; |
| $(hide) $(foreach line,$(FINAL_ODM_BUILD_PROPERTIES), \ |
| echo "$(line)" >> $@;) |
| $(hide) $(POST_PROCESS_PROPS) $@ |
| |
| # ----------------------------------------------------------------- |
| # system_ext build.prop |
| INSTALLED_SYSTEM_EXT_BUILD_PROP_TARGET := $(TARGET_OUT_SYSTEM_EXT)/build.prop |
| ALL_DEFAULT_INSTALLED_MODULES += $(INSTALLED_SYSTEM_EXT_BUILD_PROP_TARGET) |
| |
| ifdef TARGET_SYSTEM_EXT_PROP |
| system_ext_prop_files := $(TARGET_SYSTEM_EXT_PROP) |
| else |
| system_ext_prop_files := $(wildcard $(TARGET_DEVICE_DIR)/system_ext.prop) |
| endif |
| |
| FINAL_SYSTEM_EXT_PROPERTIES += \ |
| $(call collapse-pairs, $(PRODUCT_SYSTEM_EXT_PROPERTIES)) |
| FINAL_SYSTEM_EXT_PROPERTIES := $(call uniq-pairs-by-first-component, \ |
| $(FINAL_SYSTEM_EXT_PROPERTIES),=) |
| |
| $(INSTALLED_SYSTEM_EXT_BUILD_PROP_TARGET): $(BUILDINFO_COMMON_SH) $(POST_PROCESS_PROPS) $(system_ext_prop_files) |
| @echo Target system_ext buildinfo: $@ |
| @mkdir -p $(dir $@) |
| $(hide) rm -f $@ && touch $@ |
| $(hide) $(call generate-common-build-props,system_ext,$@) |
| $(hide) $(foreach file,$(system_ext_prop_files), \ |
| if [ -f "$(file)" ]; then \ |
| echo Target system_ext properties from: "$(file)"; \ |
| echo "" >> $@; \ |
| echo "#" >> $@; \ |
| echo "# from $(file)" >> $@; \ |
| echo "#" >> $@; \ |
| cat $(file) >> $@; \ |
| echo "# end of $(file)" >> $@; \ |
| fi;) |
| $(hide) echo "#" >> $@; \ |
| echo "# ADDITIONAL SYSTEM_EXT BUILD PROPERTIES" >> $@; \ |
| echo "#" >> $@; |
| $(hide) $(foreach line,$(FINAL_SYSTEM_EXT_PROPERTIES), \ |
| echo "$(line)" >> $@;) |
| $(hide) $(POST_PROCESS_PROPS) $@ |
| |
| # ---------------------------------------------------------------- |
| |
| # ----------------------------------------------------------------- |
| # sdk-build.prop |
| # |
| # There are certain things in build.prop that we don't want to |
| # ship with the sdk; remove them. |
| |
| # This must be a list of entire property keys followed by |
| # "=" characters, without any internal spaces. |
| sdk_build_prop_remove := \ |
| ro.build.user= \ |
| ro.build.host= \ |
| ro.product.brand= \ |
| ro.product.manufacturer= \ |
| ro.product.device= |
| # TODO: Remove this soon-to-be obsolete property |
| sdk_build_prop_remove += ro.build.product= |
| INSTALLED_SDK_BUILD_PROP_TARGET := $(PRODUCT_OUT)/sdk/sdk-build.prop |
| $(INSTALLED_SDK_BUILD_PROP_TARGET): $(INSTALLED_BUILD_PROP_TARGET) |
| @echo SDK buildinfo: $@ |
| @mkdir -p $(dir $@) |
| $(hide) grep -v "$(subst $(space),\|,$(strip \ |
| $(sdk_build_prop_remove)))" $< > $@.tmp |
| $(hide) for x in $(sdk_build_prop_remove); do \ |
| echo "$$x"generic >> $@.tmp; done |
| $(hide) mv $@.tmp $@ |
| |
| # ----------------------------------------------------------------- |
| # kernel modules |
| |
| # Depmod requires a well-formed kernel version so 0.0 is used as a placeholder. |
| DEPMOD_STAGING_SUBDIR :=$= lib/modules/0.0 |
| |
| # $(1): modules list |
| # $(2): output dir |
| # $(3): mount point |
| # $(4): staging dir |
| # $(5): module load list |
| # $(6): module load list filename |
| # $(7): module archive |
| # Returns the a list of src:dest pairs to install the modules using copy-many-files. |
| define build-image-kernel-modules |
| $(foreach module,$(1),$(module):$(2)/lib/modules/$(notdir $(module))) \ |
| $(eval $(call build-image-kernel-modules-depmod,$(1),$(3),$(4),$(5),$(6),$(7),$(2))) \ |
| $(4)/$(DEPMOD_STAGING_SUBDIR)/modules.dep:$(2)/lib/modules/modules.dep \ |
| $(4)/$(DEPMOD_STAGING_SUBDIR)/modules.alias:$(2)/lib/modules/modules.alias \ |
| $(4)/$(DEPMOD_STAGING_SUBDIR)/modules.softdep:$(2)/lib/modules/modules.softdep \ |
| $(4)/$(DEPMOD_STAGING_SUBDIR)/$(6):$(2)/lib/modules/$(6) |
| endef |
| |
| # $(1): modules list |
| # $(2): mount point |
| # $(3): staging dir |
| # $(4): module load list |
| # $(5): module load list filename |
| # $(6): module archive |
| # $(7): output dir |
| # TODO(b/144844424): If a module archive is being used, this step (which |
| # generates obj/PACKAGING/.../modules.dep) also unzips the module archive into |
| # the output directory. This should be moved to a module with a |
| # LOCAL_POST_INSTALL_CMD so that if modules.dep is removed from the output dir, |
| # the archive modules are restored along with modules.dep. |
| define build-image-kernel-modules-depmod |
| $(3)/$(DEPMOD_STAGING_SUBDIR)/modules.dep: .KATI_IMPLICIT_OUTPUTS := $(3)/$(DEPMOD_STAGING_SUBDIR)/modules.alias $(3)/$(DEPMOD_STAGING_SUBDIR)/modules.softdep $(3)/$(DEPMOD_STAGING_SUBDIR)/$(5) |
| $(3)/$(DEPMOD_STAGING_SUBDIR)/modules.dep: $(DEPMOD) |
| $(3)/$(DEPMOD_STAGING_SUBDIR)/modules.dep: PRIVATE_MODULES := $(1) |
| $(3)/$(DEPMOD_STAGING_SUBDIR)/modules.dep: PRIVATE_MOUNT_POINT := $(2) |
| $(3)/$(DEPMOD_STAGING_SUBDIR)/modules.dep: PRIVATE_MODULE_DIR := $(3)/$(DEPMOD_STAGING_SUBDIR)/$(2)/lib/modules |
| $(3)/$(DEPMOD_STAGING_SUBDIR)/modules.dep: PRIVATE_STAGING_DIR := $(3) |
| $(3)/$(DEPMOD_STAGING_SUBDIR)/modules.dep: PRIVATE_LOAD_MODULES := $(4) |
| $(3)/$(DEPMOD_STAGING_SUBDIR)/modules.dep: PRIVATE_LOAD_FILE := $(3)/$(DEPMOD_STAGING_SUBDIR)/$(5) |
| $(3)/$(DEPMOD_STAGING_SUBDIR)/modules.dep: PRIVATE_MODULE_ARCHIVE := $(6) |
| $(3)/$(DEPMOD_STAGING_SUBDIR)/modules.dep: PRIVATE_OUTPUT_DIR := $(7) |
| $(3)/$(DEPMOD_STAGING_SUBDIR)/modules.dep: $(1) $(6) |
| @echo depmod $$(PRIVATE_STAGING_DIR) |
| rm -rf $$(PRIVATE_STAGING_DIR) |
| mkdir -p $$(PRIVATE_MODULE_DIR) |
| $(if $(6),\ |
| unzip -qo -d $$(PRIVATE_MODULE_DIR) $$(PRIVATE_MODULE_ARCHIVE); \ |
| mkdir -p $$(PRIVATE_OUTPUT_DIR)/lib; \ |
| cp -r $$(PRIVATE_MODULE_DIR) $$(PRIVATE_OUTPUT_DIR)/lib/; \ |
| find $$(PRIVATE_MODULE_DIR) -type f -name *.ko | xargs basename -a > $$(PRIVATE_LOAD_FILE); \ |
| ) |
| $(if $(1),\ |
| cp $$(PRIVATE_MODULES) $$(PRIVATE_MODULE_DIR)/; \ |
| for MODULE in $$(PRIVATE_LOAD_MODULES); do \ |
| basename $$$$MODULE >> $$(PRIVATE_LOAD_FILE); \ |
| done; \ |
| ) |
| $(DEPMOD) -b $$(PRIVATE_STAGING_DIR) 0.0 |
| # Turn paths in modules.dep into absolute paths |
| sed -i.tmp -e 's|\([^: ]*lib/modules/[^: ]*\)|/\1|g' $$(PRIVATE_STAGING_DIR)/$$(DEPMOD_STAGING_SUBDIR)/modules.dep |
| touch $$(PRIVATE_LOAD_FILE) |
| endef |
| |
| # $(1): staging dir |
| # $(2): module load list |
| # $(3): module load list filename |
| # $(4): output dir |
| define module-load-list-copy-paths |
| $(eval $(call build-image-module-load-list,$(1),$(2),$(3))) \ |
| $(1)/$(DEPMOD_STAGING_SUBDIR)/$(3):$(4)/lib/modules/$(3) |
| endef |
| |
| # $(1): staging dir |
| # $(2): module load list |
| # $(3): module load list filename |
| define build-image-module-load-list |
| $(1)/$(DEPMOD_STAGING_SUBDIR)/$(3): PRIVATE_STAGING_DIR := $(1) |
| $(1)/$(DEPMOD_STAGING_SUBDIR)/$(3): PRIVATE_LOAD_MODULES := $(2) |
| $(1)/$(DEPMOD_STAGING_SUBDIR)/$(3): PRIVATE_LOAD_FILENAME := $(3) |
| $(1)/$(DEPMOD_STAGING_SUBDIR)/$(3): $(2) |
| rm -f $$@ |
| (for MODULE in $$(PRIVATE_LOAD_MODULES); do basename $$$$MODULE >> $$@; done) |
| endef |
| |
| ifneq ($(BUILDING_VENDOR_BOOT_IMAGE),true) |
| # If there is no vendor boot partition, store vendor ramdisk kernel modules in the |
| # boot ramdisk. |
| BOARD_GENERIC_RAMDISK_KERNEL_MODULES += $(BOARD_VENDOR_RAMDISK_KERNEL_MODULES) |
| BOARD_GENERIC_RAMDISK_KERNEL_MODULES_LOAD += $(BOARD_VENDOR_RAMDISK_KERNEL_MODULES_LOAD) |
| endif |
| |
| ifeq ($(BOARD_RECOVERY_KERNEL_MODULES_LOAD),) |
| BOARD_RECOVERY_KERNEL_MODULES_LOAD := $(BOARD_RECOVERY_KERNEL_MODULES) |
| endif |
| ifeq ($(BOARD_GENERIC_RAMDISK_KERNEL_MODULES_LOAD),) |
| BOARD_GENERIC_RAMDISK_KERNEL_MODULES_LOAD := $(BOARD_GENERIC_RAMDISK_KERNEL_MODULES) |
| endif |
| |
| ifneq ($(strip $(BOARD_GENERIC_RAMDISK_KERNEL_MODULES)),) |
| ifeq ($(BOARD_USES_RECOVERY_AS_BOOT), true) |
| BOARD_RECOVERY_KERNEL_MODULES += $(BOARD_GENERIC_RAMDISK_KERNEL_MODULES) |
| endif |
| endif |
| |
| ifneq ($(strip $(BOARD_RECOVERY_KERNEL_MODULES))$(strip $(BOARD_RECOVERY_KERNEL_MODULES_ARCHIVE)),) |
| ifeq ($(BOARD_USES_RECOVERY_AS_BOOT), true) |
| ifdef BOARD_GENERIC_RAMDISK_KERNEL_MODULES_LOAD |
| ALL_DEFAULT_INSTALLED_MODULES += $(call copy-many-files,$(call module-load-list-copy-paths,$(call intermediates-dir-for,PACKAGING,ramdisk_modules),$(BOARD_GENERIC_RAMDISK_KERNEL_MODULES_LOAD),modules.load,$(TARGET_RECOVERY_ROOT_OUT))) |
| endif |
| endif |
| ALL_DEFAULT_INSTALLED_MODULES += $(call copy-many-files,$(call build-image-kernel-modules,$(BOARD_RECOVERY_KERNEL_MODULES),$(TARGET_RECOVERY_ROOT_OUT),,$(call intermediates-dir-for,PACKAGING,depmod_recovery),$(BOARD_RECOVERY_KERNEL_MODULES_LOAD),modules.load.recovery,$(BOARD_RECOVERY_KERNEL_MODULES_ARCHIVE))) |
| endif |
| |
| ifneq ($(strip $(BOARD_VENDOR_RAMDISK_KERNEL_MODULES))$(strip $(BOARD_VENDOR_RAMDISK_KERNEL_MODULES_ARCHIVE)),) |
| ifeq ($(BOARD_VENDOR_RAMDISK_KERNEL_MODULES_LOAD),) |
| BOARD_VENDOR_RAMDISK_KERNEL_MODULES_LOAD := $(BOARD_VENDOR_RAMDISK_KERNEL_MODULES) |
| endif |
| ALL_DEFAULT_INSTALLED_MODULES += $(call copy-many-files,$(call build-image-kernel-modules,$(BOARD_VENDOR_RAMDISK_KERNEL_MODULES),$(TARGET_VENDOR_RAMDISK_OUT),,$(call intermediates-dir-for,PACKAGING,depmod_vendor_ramdisk),$(BOARD_VENDOR_RAMDISK_KERNEL_MODULES_LOAD),modules.load,$(BOARD_VENDOR_RAMDISK_KERNEL_MODULES_ARCHIVE))) |
| endif |
| |
| ifneq ($(BOARD_USES_RECOVERY_AS_BOOT), true) |
| ifneq ($(strip $(BOARD_GENERIC_RAMDISK_KERNEL_MODULES)),) |
| ALL_DEFAULT_INSTALLED_MODULES += $(call copy-many-files,$(call build-image-kernel-modules,$(BOARD_GENERIC_RAMDISK_KERNEL_MODULES),$(TARGET_RAMDISK_OUT),,$(call intermediates-dir-for,PACKAGING,depmod_ramdisk),$(BOARD_GENERIC_RAMDISK_KERNEL_MODULES_LOAD),modules.load,)) |
| endif |
| endif |
| |
| ifneq ($(strip $(BOARD_VENDOR_KERNEL_MODULES)$(strip $(BOARD_VENDOR_KERNEL_MODULES_ARCHIVE))),) |
| ifeq ($(BOARD_VENDOR_KERNEL_MODULES_LOAD),) |
| BOARD_VENDOR_KERNEL_MODULES_LOAD := $(BOARD_VENDOR_KERNEL_MODULES) |
| endif |
| ALL_DEFAULT_INSTALLED_MODULES += $(call copy-many-files,$(call build-image-kernel-modules,$(BOARD_VENDOR_KERNEL_MODULES),$(TARGET_OUT_VENDOR),vendor,$(call intermediates-dir-for,PACKAGING,depmod_vendor),$(BOARD_VENDOR_KERNEL_MODULES_LOAD),modules.load,$(BOARD_VENDOR_KERNEL_MODULES_ARCHIVE))) |
| endif |
| |
| ifneq ($(strip $(BOARD_ODM_KERNEL_MODULES))$(strip $(BOARD_ODM_KERNEL_MODULES_ARCHIVE)),) |
| ifeq ($(BOARD_RECOVERY_KERNEL_MODULES_LOAD),) |
| BOARD_ODM_KERNEL_MODULES_LOAD := $(BOARD_ODM_KERNEL_MODULES) |
| endif |
| ALL_DEFAULT_INSTALLED_MODULES += $(call copy-many-files,$(call build-image-kernel-modules,$(BOARD_ODM_KERNEL_MODULES),$(TARGET_OUT_ODM),odm,$(call intermediates-dir-for,PACKAGING,depmod_odm),$(BOARD_ODM_KERNEL_MODULES_LOAD),modules.load,$(BOARD_ODM_KERNEL_MODULES_ARCHIVE))) |
| endif |
| |
| # ----------------------------------------------------------------- |
| # Cert-to-package mapping. Used by the post-build signing tools. |
| # Use a macro to add newline to each echo command |
| # $1 package name |
| # $2 certificate |
| # $3 private key |
| # $4 compressed |
| # $5 partition tag |
| # $6 output file |
| define _apkcerts_write_line |
| $(hide) echo -n 'name="$(1).apk" certificate="$2" private_key="$3"' >> $6 |
| $(if $(4), $(hide) echo -n ' compressed="$4"' >> $6) |
| $(if $(5), $(hide) echo -n ' partition="$5"' >> $6) |
| $(hide) echo '' >> $6 |
| |
| endef |
| |
| name := $(TARGET_PRODUCT) |
| ifeq ($(TARGET_BUILD_TYPE),debug) |
| name := $(name)_debug |
| endif |
| name := $(name)-apkcerts-$(FILE_NAME_TAG) |
| intermediates := \ |
| $(call intermediates-dir-for,PACKAGING,apkcerts) |
| APKCERTS_FILE := $(intermediates)/$(name).txt |
| # We don't need to really build all the modules. |
| # TODO: rebuild APKCERTS_FILE if any app change its cert. |
| $(APKCERTS_FILE): |
| @echo APK certs list: $@ |
| @mkdir -p $(dir $@) |
| @rm -f $@ |
| $(foreach p,$(sort $(PACKAGES)),\ |
| $(if $(PACKAGES.$(p).EXTERNAL_KEY),\ |
| $(call _apkcerts_write_line,$(p),"EXTERNAL","",$(PACKAGES.$(p).COMPRESSED),$(PACKAGES.$(p).PARTITION),$@),\ |
| $(call _apkcerts_write_line,$(p),$(PACKAGES.$(p).CERTIFICATE),$(PACKAGES.$(p).PRIVATE_KEY),$(PACKAGES.$(p).COMPRESSED),$(PACKAGES.$(p).PARTITION),$@))) |
| # In case value of PACKAGES is empty. |
| $(hide) touch $@ |
| |
| .PHONY: apkcerts-list |
| apkcerts-list: $(APKCERTS_FILE) |
| |
| ifneq (,$(TARGET_BUILD_APPS)) |
| $(call dist-for-goals, apps_only, $(APKCERTS_FILE):apkcerts.txt) |
| $(call dist-for-goals, apps_only, $(SOONG_APEX_KEYS_FILE):apexkeys.txt) |
| endif |
| |
| |
| # ----------------------------------------------------------------- |
| # build system stats |
| BUILD_SYSTEM_STATS := $(PRODUCT_OUT)/build_system_stats.txt |
| $(BUILD_SYSTEM_STATS): |
| @rm -f $@ |
| @$(foreach s,$(STATS.MODULE_TYPE),echo "modules_type_make,$(s),$(words $(STATS.MODULE_TYPE.$(s)))" >>$@;) |
| @$(foreach s,$(STATS.SOONG_MODULE_TYPE),echo "modules_type_soong,$(s),$(STATS.SOONG_MODULE_TYPE.$(s))" >>$@;) |
| $(call dist-for-goals,droidcore,$(BUILD_SYSTEM_STATS)) |
| |
| # ----------------------------------------------------------------- |
| # build /product/etc/security/avb/system_other.avbpubkey if needed |
| ifdef BUILDING_SYSTEM_OTHER_IMAGE |
| ifeq ($(BOARD_AVB_ENABLE),true) |
| INSTALLED_PRODUCT_SYSTEM_OTHER_AVBKEY_TARGET := $(TARGET_OUT_PRODUCT_ETC)/security/avb/system_other.avbpubkey |
| ALL_DEFAULT_INSTALLED_MODULES += $(INSTALLED_PRODUCT_SYSTEM_OTHER_AVBKEY_TARGET) |
| endif # BOARD_AVB_ENABLE |
| endif # BUILDING_SYSTEM_OTHER_IMAGE |
| |
| # ----------------------------------------------------------------- |
| # Modules ready to be converted to Soong, ordered by how many |
| # modules depend on them. |
| SOONG_CONV := $(sort $(SOONG_CONV)) |
| SOONG_CONV_DATA := $(call intermediates-dir-for,PACKAGING,soong_conversion)/soong_conv_data |
| $(SOONG_CONV_DATA): |
| @rm -f $@ |
| @$(foreach s,$(SOONG_CONV),echo "$(s),$(SOONG_CONV.$(s).TYPE),$(sort $(SOONG_CONV.$(s).PROBLEMS)),$(sort $(filter-out $(SOONG_ALREADY_CONV),$(SOONG_CONV.$(s).DEPS)))" >>$@;) |
| |
| SOONG_TO_CONVERT_SCRIPT := build/make/tools/soong_to_convert.py |
| SOONG_TO_CONVERT := $(PRODUCT_OUT)/soong_to_convert.txt |
| $(SOONG_TO_CONVERT): $(SOONG_CONV_DATA) $(SOONG_TO_CONVERT_SCRIPT) |
| @rm -f $@ |
| $(hide) $(SOONG_TO_CONVERT_SCRIPT) $< >$@ |
| $(call dist-for-goals,droidcore,$(SOONG_TO_CONVERT)) |
| |
| # ----------------------------------------------------------------- |
| # Modules use -Wno-error, or added default -Wall -Werror |
| WALL_WERROR := $(PRODUCT_OUT)/wall_werror.txt |
| $(WALL_WERROR): |
| @rm -f $@ |
| echo "# Modules using -Wno-error" >> $@ |
| for m in $(sort $(SOONG_MODULES_USING_WNO_ERROR) $(MODULES_USING_WNO_ERROR)); do echo $$m >> $@; done |
| echo "# Modules added default -Wall" >> $@ |
| for m in $(sort $(SOONG_MODULES_ADDED_WALL) $(MODULES_ADDED_WALL)); do echo $$m >> $@; done |
| |
| $(call dist-for-goals,droidcore,$(WALL_WERROR)) |
| |
| # ----------------------------------------------------------------- |
| # C/C++ flag information for modules |
| $(call dist-for-goals,droidcore,$(SOONG_MODULES_CFLAG_ARTIFACTS)) |
| |
| # ----------------------------------------------------------------- |
| # Modules missing profile files |
| PGO_PROFILE_MISSING := $(PRODUCT_OUT)/pgo_profile_file_missing.txt |
| $(PGO_PROFILE_MISSING): |
| @rm -f $@ |
| echo "# Modules missing PGO profile files" >> $@ |
| for m in $(SOONG_MODULES_MISSING_PGO_PROFILE_FILE); do echo $$m >> $@; done |
| |
| $(call dist-for-goals,droidcore,$(PGO_PROFILE_MISSING)) |
| |
| # ----------------------------------------------------------------- |
| # The dev key is used to sign this package, and as the key required |
| # for future OTA packages installed by this system. Actual product |
| # deliverables will be re-signed by hand. We expect this file to |
| # exist with the suffixes ".x509.pem" and ".pk8". |
| DEFAULT_KEY_CERT_PAIR := $(strip $(DEFAULT_SYSTEM_DEV_CERTIFICATE)) |
| |
| |
| # Rules that need to be present for the all targets, even |
| # if they don't do anything. |
| .PHONY: systemimage |
| systemimage: |
| |
| # ----------------------------------------------------------------- |
| |
| .PHONY: event-log-tags |
| |
| # Produce an event logs tag file for everything we know about, in order |
| # to properly allocate numbers. Then produce a file that's filtered |
| # for what's going to be installed. |
| |
| all_event_log_tags_file := $(TARGET_OUT_COMMON_INTERMEDIATES)/all-event-log-tags.txt |
| |
| event_log_tags_file := $(TARGET_OUT)/etc/event-log-tags |
| |
| # Include tags from all packages that we know about |
| all_event_log_tags_src := \ |
| $(sort $(foreach m, $(ALL_MODULES), $(ALL_MODULES.$(m).EVENT_LOG_TAGS))) |
| |
| # PDK builds will already have a full list of tags that needs to get merged |
| # in with the ones from source |
| pdk_fusion_log_tags_file := $(patsubst $(PRODUCT_OUT)/%,$(_pdk_fusion_intermediates)/%,$(filter $(event_log_tags_file),$(ALL_PDK_FUSION_FILES))) |
| |
| $(all_event_log_tags_file): PRIVATE_SRC_FILES := $(all_event_log_tags_src) $(pdk_fusion_log_tags_file) |
| $(all_event_log_tags_file): $(all_event_log_tags_src) $(pdk_fusion_log_tags_file) $(MERGETAGS) build/make/tools/event_log_tags.py |
| $(hide) mkdir -p $(dir $@) |
| $(hide) $(MERGETAGS) -o $@ $(PRIVATE_SRC_FILES) |
| |
| # Include tags from all packages included in this product, plus all |
| # tags that are part of the system (ie, not in a vendor/ or device/ |
| # directory). |
| event_log_tags_src := \ |
| $(sort $(foreach m,\ |
| $(PRODUCT_PACKAGES) \ |
| $(call module-names-for-tag-list,user), \ |
| $(ALL_MODULES.$(m).EVENT_LOG_TAGS)) \ |
| $(filter-out vendor/% device/% out/%,$(all_event_log_tags_src))) |
| |
| $(event_log_tags_file): PRIVATE_SRC_FILES := $(event_log_tags_src) $(pdk_fusion_log_tags_file) |
| $(event_log_tags_file): PRIVATE_MERGED_FILE := $(all_event_log_tags_file) |
| $(event_log_tags_file): $(event_log_tags_src) $(all_event_log_tags_file) $(pdk_fusion_log_tags_file) $(MERGETAGS) build/make/tools/event_log_tags.py |
| $(hide) mkdir -p $(dir $@) |
| $(hide) $(MERGETAGS) -o $@ -m $(PRIVATE_MERGED_FILE) $(PRIVATE_SRC_FILES) |
| |
| event-log-tags: $(event_log_tags_file) |
| |
| ALL_DEFAULT_INSTALLED_MODULES += $(event_log_tags_file) |
| |
| |
| # ################################################################# |
| # Targets for boot/OS images |
| # ################################################################# |
| ifneq ($(strip $(TARGET_NO_BOOTLOADER)),true) |
| INSTALLED_BOOTLOADER_MODULE := $(PRODUCT_OUT)/bootloader |
| ifeq ($(strip $(TARGET_BOOTLOADER_IS_2ND)),true) |
| INSTALLED_2NDBOOTLOADER_TARGET := $(PRODUCT_OUT)/2ndbootloader |
| else |
| INSTALLED_2NDBOOTLOADER_TARGET := |
| endif |
| else |
| INSTALLED_BOOTLOADER_MODULE := |
| INSTALLED_2NDBOOTLOADER_TARGET := |
| endif # TARGET_NO_BOOTLOADER |
| ifneq ($(strip $(TARGET_NO_KERNEL)),true) |
| ifneq ($(strip $(BOARD_KERNEL_BINARIES)),) |
| INSTALLED_KERNEL_TARGET := $(foreach k,$(BOARD_KERNEL_BINARIES), \ |
| $(PRODUCT_OUT)/$(k)) |
| else |
| INSTALLED_KERNEL_TARGET := $(PRODUCT_OUT)/kernel |
| endif |
| else |
| INSTALLED_KERNEL_TARGET := |
| endif |
| |
| # ----------------------------------------------------------------- |
| # the root dir |
| INTERNAL_ROOT_FILES := $(filter $(TARGET_ROOT_OUT)/%, \ |
| $(ALL_GENERATED_SOURCES) \ |
| $(ALL_DEFAULT_INSTALLED_MODULES)) |
| |
| INSTALLED_FILES_FILE_ROOT := $(PRODUCT_OUT)/installed-files-root.txt |
| INSTALLED_FILES_JSON_ROOT := $(INSTALLED_FILES_FILE_ROOT:.txt=.json) |
| $(INSTALLED_FILES_FILE_ROOT): .KATI_IMPLICIT_OUTPUTS := $(INSTALLED_FILES_JSON_ROOT) |
| $(INSTALLED_FILES_FILE_ROOT) : $(INTERNAL_ROOT_FILES) $(FILESLIST) $(FILESLIST_UTIL) |
| @echo Installed file list: $@ |
| @mkdir -p $(dir $@) |
| @rm -f $@ |
| $(hide) $(FILESLIST) $(TARGET_ROOT_OUT) > $(@:.txt=.json) |
| $(hide) $(FILESLIST_UTIL) -c $(@:.txt=.json) > $@ |
| |
| $(call dist-for-goals, sdk win_sdk sdk_addon, $(INSTALLED_FILES_FILE_ROOT)) |
| |
| #------------------------------------------------------------------ |
| # dtb |
| ifdef BOARD_INCLUDE_DTB_IN_BOOTIMG |
| INSTALLED_DTBIMAGE_TARGET := $(PRODUCT_OUT)/dtb.img |
| ifdef BOARD_PREBUILT_DTBIMAGE_DIR |
| $(INSTALLED_DTBIMAGE_TARGET) : $(sort $(wildcard $(BOARD_PREBUILT_DTBIMAGE_DIR)/*.dtb)) |
| cat $^ > $@ |
| endif |
| endif |
| |
| # ----------------------------------------------------------------- |
| # the ramdisk |
| ifdef BUILDING_RAMDISK_IMAGE |
| INTERNAL_RAMDISK_FILES := $(filter $(TARGET_RAMDISK_OUT)/%, \ |
| $(ALL_GENERATED_SOURCES) \ |
| $(ALL_DEFAULT_INSTALLED_MODULES)) |
| |
| INSTALLED_FILES_FILE_RAMDISK := $(PRODUCT_OUT)/installed-files-ramdisk.txt |
| INSTALLED_FILES_JSON_RAMDISK := $(INSTALLED_FILES_FILE_RAMDISK:.txt=.json) |
| $(INSTALLED_FILES_FILE_RAMDISK): .KATI_IMPLICIT_OUTPUTS := $(INSTALLED_FILES_JSON_RAMDISK) |
| $(INSTALLED_FILES_FILE_RAMDISK) : $(INTERNAL_RAMDISK_FILES) $(FILESLIST) $(FILESLIST_UTIL) |
| @echo Installed file list: $@ |
| @mkdir -p $(TARGET_RAMDISK_OUT) |
| @mkdir -p $(dir $@) |
| @rm -f $@ |
| $(hide) $(FILESLIST) $(TARGET_RAMDISK_OUT) > $(@:.txt=.json) |
| $(hide) $(FILESLIST_UTIL) -c $(@:.txt=.json) > $@ |
| |
| $(call dist-for-goals, sdk win_sdk sdk_addon, $(INSTALLED_FILES_FILE_RAMDISK)) |
| BUILT_RAMDISK_TARGET := $(PRODUCT_OUT)/ramdisk.img |
| |
| # We just build this directly to the install location. |
| INSTALLED_RAMDISK_TARGET := $(BUILT_RAMDISK_TARGET) |
| $(INSTALLED_RAMDISK_TARGET): $(MKBOOTFS) $(INTERNAL_RAMDISK_FILES) $(INSTALLED_FILES_FILE_RAMDISK) | $(MINIGZIP) |
| $(call pretty,"Target ram disk: $@") |
| $(hide) $(MKBOOTFS) -d $(TARGET_OUT) $(TARGET_RAMDISK_OUT) | $(MINIGZIP) > $@ |
| |
| .PHONY: ramdisk-nodeps |
| ramdisk-nodeps: $(MKBOOTFS) | $(MINIGZIP) |
| @echo "make $@: ignoring dependencies" |
| $(hide) $(MKBOOTFS) -d $(TARGET_OUT) $(TARGET_RAMDISK_OUT) | $(MINIGZIP) > $(INSTALLED_RAMDISK_TARGET) |
| |
| endif # BUILDING_RAMDISK_IMAGE |
| |
| # ----------------------------------------------------------------- |
| # the boot image, which is a collection of other images. |
| |
| # This is defined here since we may be building recovery as boot |
| # below and only want to define this once |
| ifneq ($(strip $(BOARD_KERNEL_BINARIES)),) |
| BUILT_BOOTIMAGE_TARGET := $(foreach k,$(subst kernel,boot,$(BOARD_KERNEL_BINARIES)), $(PRODUCT_OUT)/$(k).img) |
| else |
| BUILT_BOOTIMAGE_TARGET := $(PRODUCT_OUT)/boot.img |
| endif |
| |
| |
| ifneq ($(strip $(TARGET_NO_KERNEL)),true) |
| INTERNAL_BOOTIMAGE_ARGS := \ |
| $(addprefix --second ,$(INSTALLED_2NDBOOTLOADER_TARGET)) \ |
| --kernel $(INSTALLED_KERNEL_TARGET) |
| |
| ifneq ($(BOARD_BUILD_SYSTEM_ROOT_IMAGE),true) |
| INTERNAL_BOOTIMAGE_ARGS += --ramdisk $(INSTALLED_RAMDISK_TARGET) |
| endif |
| |
| ifndef BUILDING_VENDOR_BOOT_IMAGE |
| ifdef BOARD_INCLUDE_DTB_IN_BOOTIMG |
| INTERNAL_BOOTIMAGE_ARGS += --dtb $(INSTALLED_DTBIMAGE_TARGET) |
| endif |
| endif |
| |
| INTERNAL_BOOTIMAGE_FILES := $(filter-out --%,$(INTERNAL_BOOTIMAGE_ARGS)) |
| |
| ifeq ($(PRODUCT_SUPPORTS_VERITY),true) |
| ifeq ($(BOARD_BUILD_SYSTEM_ROOT_IMAGE),true) |
| VERITY_KEYID := veritykeyid=id:`openssl x509 -in $(PRODUCT_VERITY_SIGNING_KEY).x509.pem -text \ |
| | grep keyid | sed 's/://g' | tr -d '[:space:]' | tr '[:upper:]' '[:lower:]' | sed 's/keyid//g'` |
| endif |
| endif |
| |
| INTERNAL_KERNEL_CMDLINE := $(strip $(INTERNAL_KERNEL_CMDLINE) buildvariant=$(TARGET_BUILD_VARIANT) $(VERITY_KEYID)) |
| |
| ifndef BUILDING_VENDOR_BOOT_IMAGE |
| ifdef BOARD_KERNEL_BASE |
| INTERNAL_BOOTIMAGE_ARGS += --base $(BOARD_KERNEL_BASE) |
| endif |
| ifdef BOARD_KERNEL_PAGESIZE |
| INTERNAL_BOOTIMAGE_ARGS += --pagesize $(BOARD_KERNEL_PAGESIZE) |
| endif |
| ifdef INTERNAL_KERNEL_CMDLINE |
| INTERNAL_BOOTIMAGE_ARGS += --cmdline "$(INTERNAL_KERNEL_CMDLINE)" |
| endif |
| else |
| # building vendor boot image, dtb/base/pagesize go there |
| ifdef GENERIC_KERNEL_CMDLINE |
| INTERNAL_BOOTIMAGE_ARGS += --cmdline "$(GENERIC_KERNEL_CMDLINE)" |
| endif |
| endif |
| |
| INTERNAL_MKBOOTIMG_VERSION_ARGS := \ |
| --os_version $(PLATFORM_VERSION) \ |
| --os_patch_level $(PLATFORM_SECURITY_PATCH) |
| |
| # Define these only if we are building boot |
| ifdef BUILDING_BOOT_IMAGE |
| INSTALLED_BOOTIMAGE_TARGET := $(BUILT_BOOTIMAGE_TARGET) |
| |
| ifeq ($(TARGET_BOOTIMAGE_USE_EXT2),true) |
| $(error TARGET_BOOTIMAGE_USE_EXT2 is not supported anymore) |
| |
| else ifeq (true,$(BOARD_AVB_ENABLE)) # TARGET_BOOTIMAGE_USE_EXT2 != true |
| |
| $(INSTALLED_BOOTIMAGE_TARGET): $(MKBOOTIMG) $(AVBTOOL) $(INTERNAL_BOOTIMAGE_FILES) $(BOARD_AVB_BOOT_KEY_PATH) |
| $(call pretty,"Target boot image: $@") |
| $(hide) $(MKBOOTIMG) $(INTERNAL_BOOTIMAGE_ARGS) $(INTERNAL_MKBOOTIMG_VERSION_ARGS) $(BOARD_MKBOOTIMG_ARGS) --output $@ |
| $(hide) $(call assert-max-image-size,$@,$(call get-hash-image-max-size,$(BOARD_BOOTIMAGE_PARTITION_SIZE))) |
| $(hide) $(AVBTOOL) add_hash_footer \ |
| --image $@ \ |
| --partition_size $(BOARD_BOOTIMAGE_PARTITION_SIZE) \ |
| --partition_name boot $(INTERNAL_AVB_BOOT_SIGNING_ARGS) \ |
| $(BOARD_AVB_BOOT_ADD_HASH_FOOTER_ARGS) |
| |
| .PHONY: bootimage-nodeps |
| bootimage-nodeps: $(MKBOOTIMG) $(AVBTOOL) $(BOARD_AVB_BOOT_KEY_PATH) |
| @echo "make $@: ignoring dependencies" |
| $(hide) $(MKBOOTIMG) $(INTERNAL_BOOTIMAGE_ARGS) $(INTERNAL_MKBOOTIMG_VERSION_ARGS) $(BOARD_MKBOOTIMG_ARGS) --output $(INSTALLED_BOOTIMAGE_TARGET) |
| $(hide) $(call assert-max-image-size,$(INSTALLED_BOOTIMAGE_TARGET),$(call get-hash-image-max-size,$(BOARD_BOOTIMAGE_PARTITION_SIZE))) |
| $(hide) $(AVBTOOL) add_hash_footer \ |
| --image $(INSTALLED_BOOTIMAGE_TARGET) \ |
| --partition_size $(BOARD_BOOTIMAGE_PARTITION_SIZE) \ |
| --partition_name boot $(INTERNAL_AVB_BOOT_SIGNING_ARGS) \ |
| $(BOARD_AVB_BOOT_ADD_HASH_FOOTER_ARGS) |
| |
| else ifeq (true,$(PRODUCT_SUPPORTS_BOOT_SIGNER)) # BOARD_AVB_ENABLE != true |
| |
| $(INSTALLED_BOOTIMAGE_TARGET): $(MKBOOTIMG) $(INTERNAL_BOOTIMAGE_FILES) $(BOOT_SIGNER) |
| $(call pretty,"Target boot image: $@") |
| $(hide) $(MKBOOTIMG) $(INTERNAL_BOOTIMAGE_ARGS) $(INTERNAL_MKBOOTIMG_VERSION_ARGS) $(BOARD_MKBOOTIMG_ARGS) --output $@ |
| $(BOOT_SIGNER) /boot $@ $(PRODUCT_VERITY_SIGNING_KEY).pk8 $(PRODUCT_VERITY_SIGNING_KEY).x509.pem $@ |
| $(hide) $(call assert-max-image-size,$@,$(BOARD_BOOTIMAGE_PARTITION_SIZE)) |
| |
| .PHONY: bootimage-nodeps |
| bootimage-nodeps: $(MKBOOTIMG) $(BOOT_SIGNER) |
| @echo "make $@: ignoring dependencies" |
| $(hide) $(MKBOOTIMG) $(INTERNAL_BOOTIMAGE_ARGS) $(INTERNAL_MKBOOTIMG_VERSION_ARGS) $(BOARD_MKBOOTIMG_ARGS) --output $(INSTALLED_BOOTIMAGE_TARGET) |
| $(BOOT_SIGNER) /boot $(INSTALLED_BOOTIMAGE_TARGET) $(PRODUCT_VERITY_SIGNING_KEY).pk8 $(PRODUCT_VERITY_SIGNING_KEY).x509.pem $(INSTALLED_BOOTIMAGE_TARGET) |
| $(hide) $(call assert-max-image-size,$(INSTALLED_BOOTIMAGE_TARGET),$(BOARD_BOOTIMAGE_PARTITION_SIZE)) |
| |
| else ifeq (true,$(PRODUCT_SUPPORTS_VBOOT)) # PRODUCT_SUPPORTS_BOOT_SIGNER != true |
| |
| $(INSTALLED_BOOTIMAGE_TARGET): $(MKBOOTIMG) $(INTERNAL_BOOTIMAGE_FILES) $(VBOOT_SIGNER) $(FUTILITY) |
| $(call pretty,"Target boot image: $@") |
| $(hide) $(MKBOOTIMG) $(INTERNAL_BOOTIMAGE_ARGS) $(INTERNAL_MKBOOTIMG_VERSION_ARGS) $(BOARD_MKBOOTIMG_ARGS) --output $@.unsigned |
| $(VBOOT_SIGNER) $(FUTILITY) $@.unsigned $(PRODUCT_VBOOT_SIGNING_KEY).vbpubk $(PRODUCT_VBOOT_SIGNING_KEY).vbprivk $(PRODUCT_VBOOT_SIGNING_SUBKEY).vbprivk $@.keyblock $@ |
| $(hide) $(call assert-max-image-size,$@,$(BOARD_BOOTIMAGE_PARTITION_SIZE)) |
| |
| .PHONY: bootimage-nodeps |
| bootimage-nodeps: $(MKBOOTIMG) $(VBOOT_SIGNER) $(FUTILITY) |
| @echo "make $@: ignoring dependencies" |
| $(hide) $(MKBOOTIMG) $(INTERNAL_BOOTIMAGE_ARGS) $(INTERNAL_MKBOOTIMG_VERSION_ARGS) $(BOARD_MKBOOTIMG_ARGS) --output $(INSTALLED_BOOTIMAGE_TARGET).unsigned |
| $(VBOOT_SIGNER) $(FUTILITY) $(INSTALLED_BOOTIMAGE_TARGET).unsigned $(PRODUCT_VBOOT_SIGNING_KEY).vbpubk $(PRODUCT_VBOOT_SIGNING_KEY).vbprivk $(PRODUCT_VBOOT_SIGNING_SUBKEY).vbprivk $(INSTALLED_BOOTIMAGE_TARGET).keyblock $(INSTALLED_BOOTIMAGE_TARGET) |
| $(hide) $(call assert-max-image-size,$(INSTALLED_BOOTIMAGE_TARGET),$(BOARD_BOOTIMAGE_PARTITION_SIZE)) |
| |
| else # PRODUCT_SUPPORTS_VBOOT != true |
| |
| $(INSTALLED_BOOTIMAGE_TARGET): $(MKBOOTIMG) $(INTERNAL_BOOTIMAGE_FILES) |
| $(call pretty,"Target boot image: $@") |
| $(hide) $(MKBOOTIMG) $(INTERNAL_BOOTIMAGE_ARGS) $(INTERNAL_MKBOOTIMG_VERSION_ARGS) $(BOARD_MKBOOTIMG_ARGS) --output $@ |
| $(hide) $(call assert-max-image-size,$@,$(BOARD_BOOTIMAGE_PARTITION_SIZE)) |
| |
| .PHONY: bootimage-nodeps |
| bootimage-nodeps: $(MKBOOTIMG) |
| @echo "make $@: ignoring dependencies" |
| $(hide) $(MKBOOTIMG) $(INTERNAL_BOOTIMAGE_ARGS) $(INTERNAL_MKBOOTIMG_VERSION_ARGS) $(BOARD_MKBOOTIMG_ARGS) --output $(INSTALLED_BOOTIMAGE_TARGET) |
| $(hide) $(call assert-max-image-size,$(INSTALLED_BOOTIMAGE_TARGET),$(BOARD_BOOTIMAGE_PARTITION_SIZE)) |
| |
| endif # TARGET_BOOTIMAGE_USE_EXT2 |
| endif # BUILDING_BOOT_IMAGE |
| |
| else # TARGET_NO_KERNEL == "true" |
| ifdef BOARD_PREBUILT_BOOTIMAGE |
| ifneq ($(BOARD_BUILD_SYSTEM_ROOT_IMAGE),true) |
| # Remove when b/63676296 is resolved. |
| $(error Prebuilt bootimage is only supported for AB targets) |
| endif |
| INSTALLED_BOOTIMAGE_TARGET := $(PRODUCT_OUT)/boot.img |
| $(eval $(call copy-one-file,$(BOARD_PREBUILT_BOOTIMAGE),$(INSTALLED_BOOTIMAGE_TARGET))) |
| else # BOARD_PREBUILT_BOOTIMAGE not defined |
| INSTALLED_BOOTIMAGE_TARGET := |
| endif # BOARD_PREBUILT_BOOTIMAGE |
| endif # TARGET_NO_KERNEL |
| |
| # ----------------------------------------------------------------- |
| # vendor boot image |
| ifeq ($(BUILDING_VENDOR_BOOT_IMAGE),true) |
| |
| ifeq ($(PRODUCT_SUPPORTS_VERITY),true) |
| $(error vboot 1.0 does not support vendor_boot partition) |
| endif |
| |
| INTERNAL_VENDOR_RAMDISK_FILES := $(filter $(TARGET_VENDOR_RAMDISK_OUT)/%, \ |
| $(ALL_GENERATED_SOURCES) \ |
| $(ALL_DEFAULT_INSTALLED_MODULES)) |
| |
| INTERNAL_VENDOR_RAMDISK_TARGET := $(call intermediates-dir-for,PACKAGING,vendor-boot)/vendor-ramdisk.cpio.gz |
| $(INTERNAL_VENDOR_RAMDISK_TARGET): $(MKBOOTFS) $(INTERNAL_VENDOR_RAMDISK_FILES) | $(MINIGZIP) |
| $(MKBOOTFS) -d $(TARGET_OUT) $(TARGET_VENDOR_RAMDISK_OUT) | $(MINIGZIP) > $@ |
| |
| ifdef BOARD_INCLUDE_DTB_IN_BOOTIMG |
| INTERNAL_VENDOR_BOOTIMAGE_ARGS += --dtb $(INSTALLED_DTBIMAGE_TARGET) |
| endif |
| ifdef BOARD_KERNEL_BASE |
| INTERNAL_VENDOR_BOOTIMAGE_ARGS += --base $(BOARD_KERNEL_BASE) |
| endif |
| ifdef BOARD_KERNEL_PAGESIZE |
| INTERNAL_VENDOR_BOOTIMAGE_ARGS += --pagesize $(BOARD_KERNEL_PAGESIZE) |
| endif |
| ifdef INTERNAL_KERNEL_CMDLINE |
| INTERNAL_VENDOR_BOOTIMAGE_ARGS += --vendor_cmdline "$(INTERNAL_KERNEL_CMDLINE)" |
| endif |
| |
| INSTALLED_VENDOR_BOOTIMAGE_TARGET := $(PRODUCT_OUT)/vendor_boot.img |
| $(INSTALLED_VENDOR_BOOTIMAGE_TARGET): $(MKBOOTIMG) $(INTERNAL_VENDOR_RAMDISK_TARGET) $(INSTALLED_DTBIMAGE_TARGET) |
| ifeq ($(BOARD_AVB_ENABLE),true) |
| $(INSTALLED_VENDOR_BOOTIMAGE_TARGET): $(AVBTOOL) $(BOARD_AVB_VENDOR_BOOTIMAGE_KEY_PATH) |
| $(call pretty,"Target vendor_boot image: $@") |
| $(MKBOOTIMG) $(INTERNAL_VENDOR_BOOTIMAGE_ARGS) $(INTERNAL_MKBOOTIMG_VERSION_ARGS) $(BOARD_MKBOOTIMG_ARGS) --vendor_ramdisk $(INTERNAL_VENDOR_RAMDISK_TARGET) --vendor_boot $@ |
| $(call assert-max-image-size,$@,$(BOARD_VENDOR_BOOTIMAGE_PARTITION_SIZE)) |
| $(AVBTOOL) add_hash_footer \ |
| --image $@ \ |
| --partition_size $(BOARD_VENDOR_BOOTIMAGE_PARTITION_SIZE) \ |
| --partition_name vendor_boot $(INTERNAL_AVB_VENDOR_BOOT_SIGNING_ARGS) \ |
| $(BOARD_AVB_VENDOR_BOOT_ADD_HASH_FOOTER_ARGS) |
| else |
| $(INSTALLED_VENDOR_BOOTIMAGE_TARGET): |
| $(call pretty,"Target vendor_boot image: $@") |
| $(MKBOOTIMG) $(INTERNAL_VENDOR_BOOTIMAGE_ARGS) $(INTERNAL_MKBOOTIMG_VERSION_ARGS) $(BOARD_MKBOOTIMG_ARGS) --vendor_ramdisk $(INTERNAL_VENDOR_RAMDISK_TARGET) --vendor_boot $@ |
| $(call assert-max-image-size,$@,$(BOARD_VENDOR_BOOTIMAGE_PARTITION_SIZE)) |
| endif |
| endif # BUILDING_VENDOR_BOOT_IMAGE |
| |
| # ----------------------------------------------------------------- |
| # NOTICE files |
| # |
| # We are required to publish the licenses for all code under BSD, GPL and |
| # Apache licenses (and possibly other more exotic ones as well). We err on the |
| # side of caution, so the licenses for other third-party code are included here |
| # too. |
| # |
| # This needs to be before the systemimage rules, because it adds to |
| # ALL_DEFAULT_INSTALLED_MODULES, which those use to pick which files |
| # go into the systemimage. |
| |
| .PHONY: notice_files |
| |
| # Create the rule to combine the files into text and html/xml forms |
| # $(1) - xml_excluded_system_product_odm|xml_excluded_vendor_product_odm |
| # xml_product|xml_odm|xml_system_ext|xml_system|html |
| # $(2) - Plain text output file |
| # $(3) - HTML/XML output file |
| # $(4) - File title |
| # $(5) - Directory to use. Notice files are all $(5)/src. Other |
| # directories in there will be used for scratch |
| # $(6) - Dependencies for the output files |
| # $(7) - Directories to exclude |
| # |
| # The algorithm here is that we go collect a hash for each of the notice |
| # files and write the names of the files that match that hash. Then |
| # to generate the real files, we go print out all of the files and their |
| # hashes. |
| # |
| # These rules are fairly complex, so they depend on this makefile so if |
| # it changes, they'll run again. |
| # |
| # TODO: We could clean this up so that we just record the locations of the |
| # original notice files instead of making rules to copy them somwehere. |
| # Then we could traverse that without quite as much bash drama. |
| define combine-notice-files |
| $(2) $(3): PRIVATE_MESSAGE := $(4) |
| $(2) $(3): PRIVATE_DIR := $(5) |
| $(2) : $(3) |
| $(3) : $(6) $(BUILD_SYSTEM)/Makefile build/make/tools/generate-notice-files.py |
| build/make/tools/generate-notice-files.py --text-output $(2) $(foreach xdir, $(7), -e $(xdir) )\ |
| $(if $(filter $(1),xml_excluded_vendor_product_odm),-e vendor -e product -e system_ext -e odm --xml-output, \ |
| $(if $(filter $(1),xml_excluded_system_product_odm),-e system -e product -e system_ext -e odm --xml-output, \ |
| $(if $(filter $(1),xml_product),-i product --xml-output, \ |
| $(if $(filter $(1),xml_system_ext),-i system_ext --xml-output, \ |
| $(if $(filter $(1),xml_system),-i system --xml-output, \ |
| $(if $(filter $(1),xml_odm),-i odm --xml-output, \ |
| --html-output)))))) $(3) \ |
| -t $$(PRIVATE_MESSAGE) -s $$(PRIVATE_DIR)/src |
| notice_files: $(2) $(3) |
| endef |
| |
| # Notice file logic isn't relevant for TARGET_BUILD_APPS |
| ifndef TARGET_BUILD_APPS |
| |
| # TODO These intermediate NOTICE.txt/NOTICE.html files should go into |
| # TARGET_OUT_NOTICE_FILES now that the notice files are gathered from |
| # the src subdirectory. |
| target_notice_file_txt := $(TARGET_OUT_INTERMEDIATES)/NOTICE.txt |
| tools_notice_file_txt := $(HOST_OUT_INTERMEDIATES)/NOTICE.txt |
| tools_notice_file_html := $(HOST_OUT_INTERMEDIATES)/NOTICE.html |
| kernel_notice_file := $(TARGET_OUT_NOTICE_FILES)/src/kernel.txt |
| winpthreads_notice_file := $(TARGET_OUT_NOTICE_FILES)/src/winpthreads.txt |
| pdk_fusion_notice_files := $(filter $(TARGET_OUT_NOTICE_FILES)/%, $(ALL_PDK_FUSION_FILES)) |
| |
| # Some targets get included under $(PRODUCT_OUT) for debug symbols or other |
| # reasons--not to be flashed onto any device. Targets under these directories |
| # need no associated notice file on the device UI. |
| exclude_target_dirs := apex |
| |
| # TODO(b/69865032): Make PRODUCT_NOTICE_SPLIT the default behavior. |
| ifneq ($(PRODUCT_NOTICE_SPLIT),true) |
| target_notice_file_html := $(TARGET_OUT_INTERMEDIATES)/NOTICE.html |
| target_notice_file_html_gz := $(TARGET_OUT_INTERMEDIATES)/NOTICE.html.gz |
| installed_notice_html_or_xml_gz := $(TARGET_OUT)/etc/NOTICE.html.gz |
| $(eval $(call combine-notice-files, html, \ |
| $(target_notice_file_txt), \ |
| $(target_notice_file_html), \ |
| "Notices for files contained in the filesystem images in this directory:", \ |
| $(TARGET_OUT_NOTICE_FILES), \ |
| $(ALL_DEFAULT_INSTALLED_MODULES) $(kernel_notice_file) $(pdk_fusion_notice_files), \ |
| $(exclude_target_dirs))) |
| $(target_notice_file_html_gz): $(target_notice_file_html) | $(MINIGZIP) |
| $(hide) $(MINIGZIP) -9 < $< > $@ |
| $(installed_notice_html_or_xml_gz): $(target_notice_file_html_gz) |
| $(copy-file-to-target) |
| else |
| target_notice_file_xml := $(TARGET_OUT_INTERMEDIATES)/NOTICE.xml |
| target_notice_file_xml_gz := $(TARGET_OUT_INTERMEDIATES)/NOTICE.xml.gz |
| installed_notice_html_or_xml_gz := $(TARGET_OUT)/etc/NOTICE.xml.gz |
| |
| target_vendor_notice_file_txt := $(TARGET_OUT_INTERMEDIATES)/NOTICE_VENDOR.txt |
| target_vendor_notice_file_xml := $(TARGET_OUT_INTERMEDIATES)/NOTICE_VENDOR.xml |
| target_vendor_notice_file_xml_gz := $(TARGET_OUT_INTERMEDIATES)/NOTICE_VENDOR.xml.gz |
| installed_vendor_notice_xml_gz := $(TARGET_OUT_VENDOR)/etc/NOTICE.xml.gz |
| |
| target_product_notice_file_txt := $(TARGET_OUT_INTERMEDIATES)/NOTICE_PRODUCT.txt |
| target_product_notice_file_xml := $(TARGET_OUT_INTERMEDIATES)/NOTICE_PRODUCT.xml |
| target_product_notice_file_xml_gz := $(TARGET_OUT_INTERMEDIATES)/NOTICE_PRODUCT.xml.gz |
| installed_product_notice_xml_gz := $(TARGET_OUT_PRODUCT)/etc/NOTICE.xml.gz |
| |
| target_system_ext_notice_file_txt := $(TARGET_OUT_INTERMEDIATES)/NOTICE_SYSTEM_EXT.txt |
| target_system_ext_notice_file_xml := $(TARGET_OUT_INTERMEDIATES)/NOTICE_SYSTEM_EXT.xml |
| target_system_ext_notice_file_xml_gz := $(TARGET_OUT_INTERMEDIATES)/NOTICE_SYSTEM_EXT.xml.gz |
| installed_system_ext_notice_xml_gz := $(TARGET_OUT_SYSTEM_EXT)/etc/NOTICE.xml.gz |
| |
| target_odm_notice_file_txt := $(TARGET_OUT_INTERMEDIATES)/NOTICE_ODM.txt |
| target_odm_notice_file_xml := $(TARGET_OUT_INTERMEDIATES)/NOTICE_ODM.xml |
| target_odm_notice_file_xml_gz := $(TARGET_OUT_INTERMEDIATES)/NOTICE_ODM.xml.gz |
| installed_odm_notice_xml_gz := $(TARGET_OUT_ODM)/etc/NOTICE.xml.gz |
| |
| # Notice files are copied to TARGET_OUT_NOTICE_FILES as a side-effect of their module |
| # being built. A notice xml file must depend on all modules that could potentially |
| # install a license file relevant to it. |
| license_modules := $(ALL_DEFAULT_INSTALLED_MODULES) $(kernel_notice_file) $(pdk_fusion_notice_files) |
| # Only files copied to a system image need system image notices. |
| license_modules := $(filter $(PRODUCT_OUT)/%,$(license_modules)) |
| # Phonys/fakes don't have notice files (though their deps might) |
| license_modules := $(filter-out $(TARGET_OUT_FAKE)/%,$(license_modules)) |
| # testcases are not relevant to the system image. |
| license_modules := $(filter-out $(TARGET_OUT_TESTCASES)/%,$(license_modules)) |
| # filesystem images: system, vendor, product, system_ext, and odm |
| license_modules_system := $(filter $(TARGET_OUT)/%,$(license_modules)) |
| license_modules_vendor := $(filter $(TARGET_OUT_VENDOR)/%,$(license_modules)) |
| license_modules_product := $(filter $(TARGET_OUT_PRODUCT)/%,$(license_modules)) |
| license_modules_system_ext := $(filter $(TARGET_OUT_SYSTEM_EXT)/%,$(license_modules)) |
| license_modules_odm := $(filter $(TARGET_OUT_ODM)/%,$(license_modules)) |
| license_modules_agg := $(license_modules_system) \ |
| $(license_modules_vendor) \ |
| $(license_modules_product) \ |
| $(license_modules_system_ext) \ |
| $(license_modules_odm) |
| # targets used for debug symbols only and do not get copied to the device |
| license_modules_symbols_only := $(filter $(PRODUCT_OUT)/apex/%,$(license_modules)) |
| |
| license_modules_rest := $(filter-out $(license_modules_agg),$(license_modules)) |
| license_modules_rest := $(filter-out $(license_modules_symbols_only),$(license_modules_rest)) |
| |
| # Identify the other targets we expect to have notices for: |
| # targets copied to the device but are not readable by the UI (e.g. must boot |
| # into a different partition to read or don't have an associated /etc |
| # directory) must have their notices built somewhere readable. |
| license_modules_rehomed := $(filter-out $(PRODUCT_OUT)/%/%,$(license_modules_rest)) # files in root have no /etc |
| license_modules_rehomed += $(filter $(PRODUCT_OUT)/recovery/%,$(license_modules_rest)) |
| license_modules_rehomed += $(filter $(PRODUCT_OUT)/root/%,$(license_modules_rest)) |
| license_modules_rehomed += $(filter $(PRODUCT_OUT)/data/%,$(license_modules_rest)) |
| license_modules_rehomed += $(filter $(PRODUCT_OUT)/ramdisk/%,$(license_modules_rest)) |
| license_modules_rehomed += $(filter $(PRODUCT_OUT)/debug_ramdisk/%,$(license_modules_rest)) |
| license_modules_rehomed += $(filter $(PRODUCT_OUT)/vendor-ramdisk/%,$(license_modules_rest)) |
| license_modules_rehomed += $(filter $(PRODUCT_OUT)/persist/%,$(license_modules_rest)) |
| license_modules_rehomed += $(filter $(PRODUCT_OUT)/persist.img,$(license_modules_rest)) |
| license_modules_rehomed += $(filter $(PRODUCT_OUT)/system_other/%,$(license_modules_rest)) |
| license_modules_rehomed += $(filter $(PRODUCT_OUT)/kernel%,$(license_modules_rest)) |
| license_modules_rehomed += $(filter $(PRODUCT_OUT)/%.img,$(license_modules_rest)) |
| license_modules_rehomed += $(filter $(PRODUCT_OUT)/%.bin,$(license_modules_rest)) |
| |
| # after removing targets in system images, targets reported in system images, and |
| # targets used for debug symbols that do not need notices, nothing must remain. |
| license_modules_rest := $(filter-out $(license_modules_rehomed),$(license_modules_rest)) |
| $(call maybe-print-list-and-error, $(license_modules_rest), \ |
| "Targets added under $(PRODUCT_OUT)/ unaccounted for notice handling.") |
| |
| # If we are building in a configuration that includes a prebuilt vendor.img, we can't |
| # update its notice file, so include those notices in the system partition instead |
| ifdef BOARD_PREBUILT_VENDORIMAGE |
| license_modules_system += $(license_modules_rehomed) |
| system_xml_directories := xml_excluded_vendor_product_odm |
| system_notice_file_message := "Notices for files contained in all filesystem images except vendor/system_ext/product/odm in this directory:" |
| else |
| license_modules_vendor += $(license_modules_rehomed) |
| system_xml_directories := xml_system |
| system_notice_file_message := "Notices for files contained in the system filesystem image in this directory:" |
| endif |
| |
| $(eval $(call combine-notice-files, $(system_xml_directories), \ |
| $(target_notice_file_txt), \ |
| $(target_notice_file_xml), \ |
| $(system_notice_file_message), \ |
| $(TARGET_OUT_NOTICE_FILES), \ |
| $(license_modules_system), \ |
| $(exclude_target_dirs))) |
| $(eval $(call combine-notice-files, xml_excluded_system_product_odm, \ |
| $(target_vendor_notice_file_txt), \ |
| $(target_vendor_notice_file_xml), \ |
| "Notices for files contained in all filesystem images except system/system_ext/product/odm in this directory:", \ |
| $(TARGET_OUT_NOTICE_FILES), \ |
| $(license_modules_vendor), \ |
| $(exclude_target_dirs))) |
| $(eval $(call combine-notice-files, xml_product, \ |
| $(target_product_notice_file_txt), \ |
| $(target_product_notice_file_xml), \ |
| "Notices for files contained in the product filesystem image in this directory:", \ |
| $(TARGET_OUT_NOTICE_FILES), \ |
| $(license_modules_product), \ |
| $(exclude_target_dirs))) |
| $(eval $(call combine-notice-files, xml_system_ext, \ |
| $(target_system_ext_notice_file_txt), \ |
| $(target_system_ext_notice_file_xml), \ |
| "Notices for files contained in the system_ext filesystem image in this directory:", \ |
| $(TARGET_OUT_NOTICE_FILES), \ |
| $(license_modules_system_ext), \ |
| $(exclude_target_dirs))) |
| $(eval $(call combine-notice-files, xml_odm, \ |
| $(target_odm_notice_file_txt), \ |
| $(target_odm_notice_file_xml), \ |
| "Notices for files contained in the odm filesystem image in this directory:", \ |
| $(TARGET_OUT_NOTICE_FILES), \ |
| $(license_modules_odm), \ |
| $(exclude_target_dirs))) |
| |
| $(target_notice_file_xml_gz): $(target_notice_file_xml) | $(MINIGZIP) |
| $(hide) $(MINIGZIP) -9 < $< > $@ |
| $(target_vendor_notice_file_xml_gz): $(target_vendor_notice_file_xml) | $(MINIGZIP) |
| $(hide) $(MINIGZIP) -9 < $< > $@ |
| $(target_product_notice_file_xml_gz): $(target_product_notice_file_xml) | $(MINIGZIP) |
| $(hide) $(MINIGZIP) -9 < $< > $@ |
| $(target_system_ext_notice_file_xml_gz): $(target_system_ext_notice_file_xml) | $(MINIGZIP) |
| $(hide) $(MINIGZIP) -9 < $< > $@ |
| $(target_odm_notice_file_xml_gz): $(target_odm_notice_file_xml) | $(MINIGZIP) |
| $(hide) $(MINIGZIP) -9 < $< > $@ |
| $(installed_notice_html_or_xml_gz): $(target_notice_file_xml_gz) |
| $(copy-file-to-target) |
| $(installed_vendor_notice_xml_gz): $(target_vendor_notice_file_xml_gz) |
| $(copy-file-to-target) |
| $(installed_product_notice_xml_gz): $(target_product_notice_file_xml_gz) |
| $(copy-file-to-target) |
| $(installed_system_ext_notice_xml_gz): $(target_system_ext_notice_file_xml_gz) |
| $(copy-file-to-target) |
| $(installed_odm_notice_xml_gz): $(target_odm_notice_file_xml_gz) |
| $(copy-file-to-target) |
| |
| ALL_DEFAULT_INSTALLED_MODULES += $(installed_notice_html_or_xml_gz) |
| ALL_DEFAULT_INSTALLED_MODULES += $(installed_vendor_notice_xml_gz) |
| ALL_DEFAULT_INSTALLED_MODULES += $(installed_product_notice_xml_gz) |
| ALL_DEFAULT_INSTALLED_MODULES += $(installed_system_ext_notice_xml_gz) |
| ALL_DEFAULT_INSTALLED_MODULES += $(installed_odm_notice_xml_gz) |
| endif # PRODUCT_NOTICE_SPLIT |
| |
| ALL_DEFAULT_INSTALLED_MODULES += $(installed_notice_html_or_xml_gz) |
| |
| $(eval $(call combine-notice-files, html, \ |
| $(tools_notice_file_txt), \ |
| $(tools_notice_file_html), \ |
| "Notices for files contained in the tools directory:", \ |
| $(HOST_OUT_NOTICE_FILES), \ |
| $(ALL_DEFAULT_INSTALLED_MODULES) \ |
| $(winpthreads_notice_file), \ |
| $(exclude_target_dirs))) |
| |
| endif # TARGET_BUILD_APPS |
| |
| # The kernel isn't really a module, so to get its module file in there, we |
| # make the target NOTICE files depend on this particular file too, which will |
| # then be in the right directory for the find in combine-notice-files to work. |
| $(eval $(call copy-one-file,$(BUILD_SYSTEM)/LINUX_KERNEL_COPYING,$(kernel_notice_file))) |
| |
| $(eval $(call copy-one-file,$(BUILD_SYSTEM)/WINPTHREADS_COPYING,$(winpthreads_notice_file))) |
| |
| |
| # ################################################################# |
| # Targets for user images |
| # ################################################################# |
| |
| INTERNAL_USERIMAGES_EXT_VARIANT := |
| ifeq ($(TARGET_USERIMAGES_USE_EXT2),true) |
| INTERNAL_USERIMAGES_EXT_VARIANT := ext2 |
| else |
| ifeq ($(TARGET_USERIMAGES_USE_EXT3),true) |
| INTERNAL_USERIMAGES_EXT_VARIANT := ext3 |
| else |
| ifeq ($(TARGET_USERIMAGES_USE_EXT4),true) |
| INTERNAL_USERIMAGES_EXT_VARIANT := ext4 |
| endif |
| endif |
| endif |
| |
| # These options tell the recovery updater/installer how to mount the partitions writebale. |
| # <fstype>=<fstype_opts>[|<fstype_opts>]... |
| # fstype_opts := <opt>[,<opt>]... |
| # opt := <name>[=<value>] |
| # The following worked on Nexus devices with Kernel 3.1, 3.4, 3.10 |
| DEFAULT_TARGET_RECOVERY_FSTYPE_MOUNT_OPTIONS := ext4=max_batch_time=0,commit=1,data=ordered,barrier=1,errors=panic,nodelalloc |
| |
| ifneq (true,$(TARGET_USERIMAGES_SPARSE_EXT_DISABLED)) |
| INTERNAL_USERIMAGES_SPARSE_EXT_FLAG := -s |
| endif |
| ifneq (true,$(TARGET_USERIMAGES_SPARSE_SQUASHFS_DISABLED)) |
| INTERNAL_USERIMAGES_SPARSE_SQUASHFS_FLAG := -s |
| endif |
| ifneq (true,$(TARGET_USERIMAGES_SPARSE_F2FS_DISABLED)) |
| INTERNAL_USERIMAGES_SPARSE_F2FS_FLAG := -S |
| endif |
| |
| INTERNAL_USERIMAGES_DEPS := \ |
| $(BUILD_IMAGE) \ |
| $(MKE2FS_CONF) \ |
| $(MKEXTUSERIMG) |
| |
| ifeq ($(TARGET_USERIMAGES_USE_F2FS),true) |
| INTERNAL_USERIMAGES_DEPS += $(MKF2FSUSERIMG) |
| endif |
| |
| ifneq ($(filter $(BOARD_PRODUCTIMAGE_FILE_SYSTEM_TYPE) $(BOARD_SYSTEM_EXTIMAGE_FILE_SYSTEM_TYPE) $(BOARD_ODMIMAGE_FILE_SYSTEM_TYPE) $(BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE) $(BOARD_SYSTEMIMAGE_FILE_SYSTEM_TYPE),squashfs),) |
| INTERNAL_USERIMAGES_DEPS += $(MKSQUASHFSUSERIMG) |
| endif |
| |
| ifeq (true,$(PRODUCT_SUPPORTS_VERITY)) |
| INTERNAL_USERIMAGES_DEPS += $(BUILD_VERITY_METADATA) $(BUILD_VERITY_TREE) $(APPEND2SIMG) $(VERITY_SIGNER) |
| ifeq (true,$(PRODUCT_SUPPORTS_VERITY_FEC)) |
| INTERNAL_USERIMAGES_DEPS += $(FEC) |
| endif |
| endif |
| |
| ifeq ($(BOARD_AVB_ENABLE),true) |
| INTERNAL_USERIMAGES_DEPS += $(AVBTOOL) |
| endif |
| |
| # Get a colon-separated list of search paths. |
| INTERNAL_USERIMAGES_BINARY_PATHS := $(subst $(space),:,$(sort $(dir $(INTERNAL_USERIMAGES_DEPS)))) |
| |
| SELINUX_FC := $(call intermediates-dir-for,ETC,file_contexts.bin)/file_contexts.bin |
| INTERNAL_USERIMAGES_DEPS += $(SELINUX_FC) |
| |
| ifeq (true,$(PRODUCT_USE_DYNAMIC_PARTITIONS)) |
| |
| ifeq ($(PRODUCT_SUPPORTS_VERITY),true) |
| $(error vboot 1.0 doesn't support logical partition) |
| endif |
| |
| endif # PRODUCT_USE_DYNAMIC_PARTITIONS |
| |
| # $(1): the path of the output dictionary file |
| # $(2): a subset of "system vendor cache userdata product system_ext oem odm" |
| # $(3): additional "key=value" pairs to append to the dictionary file. |
| define generate-image-prop-dictionary |
| $(if $(filter $(2),system),\ |
| $(if $(BOARD_SYSTEMIMAGE_PARTITION_SIZE),$(hide) echo "system_size=$(BOARD_SYSTEMIMAGE_PARTITION_SIZE)" >> $(1)) |
| $(if $(INTERNAL_SYSTEM_OTHER_PARTITION_SIZE),$(hide) echo "system_other_size=$(INTERNAL_SYSTEM_OTHER_PARTITION_SIZE)" >> $(1)) |
| $(if $(BOARD_SYSTEMIMAGE_FILE_SYSTEM_TYPE),$(hide) echo "system_fs_type=$(BOARD_SYSTEMIMAGE_FILE_SYSTEM_TYPE)" >> $(1)) |
| $(if $(BOARD_SYSTEMIMAGE_EXTFS_INODE_COUNT),$(hide) echo "system_extfs_inode_count=$(BOARD_SYSTEMIMAGE_EXTFS_INODE_COUNT)" >> $(1)) |
| $(if $(BOARD_SYSTEMIMAGE_EXTFS_RSV_PCT),$(hide) echo "system_extfs_rsv_pct=$(BOARD_SYSTEMIMAGE_EXTFS_RSV_PCT)" >> $(1)) |
| $(if $(BOARD_SYSTEMIMAGE_JOURNAL_SIZE),$(hide) echo "system_journal_size=$(BOARD_SYSTEMIMAGE_JOURNAL_SIZE)" >> $(1)) |
| $(if $(BOARD_SYSTEMIMAGE_SQUASHFS_COMPRESSOR),$(hide) echo "system_squashfs_compressor=$(BOARD_SYSTEMIMAGE_SQUASHFS_COMPRESSOR)" >> $(1)) |
| $(if $(BOARD_SYSTEMIMAGE_SQUASHFS_COMPRESSOR_OPT),$(hide) echo "system_squashfs_compressor_opt=$(BOARD_SYSTEMIMAGE_SQUASHFS_COMPRESSOR_OPT)" >> $(1)) |
| $(if $(BOARD_SYSTEMIMAGE_SQUASHFS_BLOCK_SIZE),$(hide) echo "system_squashfs_block_size=$(BOARD_SYSTEMIMAGE_SQUASHFS_BLOCK_SIZE)" >> $(1)) |
| $(if $(BOARD_SYSTEMIMAGE_SQUASHFS_DISABLE_4K_ALIGN),$(hide) echo "system_squashfs_disable_4k_align=$(BOARD_SYSTEMIMAGE_SQUASHFS_DISABLE_4K_ALIGN)" >> $(1)) |
| $(if $(PRODUCT_SYSTEM_BASE_FS_PATH),$(hide) echo "system_base_fs_file=$(PRODUCT_SYSTEM_BASE_FS_PATH)" >> $(1)) |
| $(if $(PRODUCT_SYSTEM_HEADROOM),$(hide) echo "system_headroom=$(PRODUCT_SYSTEM_HEADROOM)" >> $(1)) |
| $(if $(BOARD_SYSTEMIMAGE_PARTITION_RESERVED_SIZE),$(hide) echo "system_reserved_size=$(BOARD_SYSTEMIMAGE_PARTITION_RESERVED_SIZE)" >> $(1)) |
| $(hide) echo "system_selinux_fc=$(SELINUX_FC)" >> $(1) |
| ) |
| $(if $(filter $(2),userdata),\ |
| $(if $(BOARD_USERDATAIMAGE_FILE_SYSTEM_TYPE),$(hide) echo "userdata_fs_type=$(BOARD_USERDATAIMAGE_FILE_SYSTEM_TYPE)" >> $(1)) |
| $(if $(BOARD_USERDATAIMAGE_PARTITION_SIZE),$(hide) echo "userdata_size=$(BOARD_USERDATAIMAGE_PARTITION_SIZE)" >> $(1)) |
| $(if $(PRODUCT_FS_CASEFOLD),$(hide) echo "needs_casefold=$(PRODUCT_FS_CASEFOLD)" >> $(1)) |
| $(if $(PRODUCT_QUOTA_PROJID),$(hide) echo "needs_projid=$(PRODUCT_QUOTA_PROJID)" >> $(1)) |
| $(hide) echo "userdata_selinux_fc=$(SELINUX_FC)" >> $(1) |
| ) |
| $(if $(filter $(2),cache),\ |
| $(if $(BOARD_CACHEIMAGE_FILE_SYSTEM_TYPE),$(hide) echo "cache_fs_type=$(BOARD_CACHEIMAGE_FILE_SYSTEM_TYPE)" >> $(1)) |
| $(if $(BOARD_CACHEIMAGE_PARTITION_SIZE),$(hide) echo "cache_size=$(BOARD_CACHEIMAGE_PARTITION_SIZE)" >> $(1)) |
| $(hide) echo "cache_selinux_fc=$(SELINUX_FC)" >> $(1) |
| ) |
| $(if $(filter $(2),vendor),\ |
| $(if $(BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE),$(hide) echo "vendor_fs_type=$(BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE)" >> $(1)) |
| $(if $(BOARD_VENDORIMAGE_EXTFS_INODE_COUNT),$(hide) echo "vendor_extfs_inode_count=$(BOARD_VENDORIMAGE_EXTFS_INODE_COUNT)" >> $(1)) |
| $(if $(BOARD_VENDORIMAGE_EXTFS_RSV_PCT),$(hide) echo "vendor_extfs_rsv_pct=$(BOARD_VENDORIMAGE_EXTFS_RSV_PCT)" >> $(1)) |
| $(if $(BOARD_VENDORIMAGE_PARTITION_SIZE),$(hide) echo "vendor_size=$(BOARD_VENDORIMAGE_PARTITION_SIZE)" >> $(1)) |
| $(if $(BOARD_VENDORIMAGE_JOURNAL_SIZE),$(hide) echo "vendor_journal_size=$(BOARD_VENDORIMAGE_JOURNAL_SIZE)" >> $(1)) |
| $(if $(BOARD_VENDORIMAGE_SQUASHFS_COMPRESSOR),$(hide) echo "vendor_squashfs_compressor=$(BOARD_VENDORIMAGE_SQUASHFS_COMPRESSOR)" >> $(1)) |
| $(if $(BOARD_VENDORIMAGE_SQUASHFS_COMPRESSOR_OPT),$(hide) echo "vendor_squashfs_compressor_opt=$(BOARD_VENDORIMAGE_SQUASHFS_COMPRESSOR_OPT)" >> $(1)) |
| $(if $(BOARD_VENDORIMAGE_SQUASHFS_BLOCK_SIZE),$(hide) echo "vendor_squashfs_block_size=$(BOARD_VENDORIMAGE_SQUASHFS_BLOCK_SIZE)" >> $(1)) |
| $(if $(BOARD_VENDORIMAGE_SQUASHFS_DISABLE_4K_ALIGN),$(hide) echo "vendor_squashfs_disable_4k_align=$(BOARD_VENDORIMAGE_SQUASHFS_DISABLE_4K_ALIGN)" >> $(1)) |
| $(if $(PRODUCT_VENDOR_BASE_FS_PATH),$(hide) echo "vendor_base_fs_file=$(PRODUCT_VENDOR_BASE_FS_PATH)" >> $(1)) |
| $(if $(BOARD_VENDORIMAGE_PARTITION_RESERVED_SIZE),$(hide) echo "vendor_reserved_size=$(BOARD_VENDORIMAGE_PARTITION_RESERVED_SIZE)" >> $(1)) |
| $(hide) echo "vendor_selinux_fc=$(SELINUX_FC)" >> $(1) |
| ) |
| $(if $(filter $(2),product),\ |
| $(if $(BOARD_PRODUCTIMAGE_FILE_SYSTEM_TYPE),$(hide) echo "product_fs_type=$(BOARD_PRODUCTIMAGE_FILE_SYSTEM_TYPE)" >> $(1)) |
| $(if $(BOARD_PRODUCTIMAGE_EXTFS_INODE_COUNT),$(hide) echo "product_extfs_inode_count=$(BOARD_PRODUCTIMAGE_EXTFS_INODE_COUNT)" >> $(1)) |
| $(if $(BOARD_PRODUCTIMAGE_EXTFS_RSV_PCT),$(hide) echo "product_extfs_rsv_pct=$(BOARD_PRODUCTIMAGE_EXTFS_RSV_PCT)" >> $(1)) |
| $(if $(BOARD_PRODUCTIMAGE_PARTITION_SIZE),$(hide) echo "product_size=$(BOARD_PRODUCTIMAGE_PARTITION_SIZE)" >> $(1)) |
| $(if $(BOARD_PRODUCTIMAGE_JOURNAL_SIZE),$(hide) echo "product_journal_size=$(BOARD_PRODUCTIMAGE_JOURNAL_SIZE)" >> $(1)) |
| $(if $(BOARD_PRODUCTIMAGE_SQUASHFS_COMPRESSOR),$(hide) echo "product_squashfs_compressor=$(BOARD_PRODUCTIMAGE_SQUASHFS_COMPRESSOR)" >> $(1)) |
| $(if $(BOARD_PRODUCTIMAGE_SQUASHFS_COMPRESSOR_OPT),$(hide) echo "product_squashfs_compressor_opt=$(BOARD_PRODUCTIMAGE_SQUASHFS_COMPRESSOR_OPT)" >> $(1)) |
| $(if $(BOARD_PRODUCTIMAGE_SQUASHFS_BLOCK_SIZE),$(hide) echo "product_squashfs_block_size=$(BOARD_PRODUCTIMAGE_SQUASHFS_BLOCK_SIZE)" >> $(1)) |
| $(if $(BOARD_PRODUCTIMAGE_SQUASHFS_DISABLE_4K_ALIGN),$(hide) echo "product_squashfs_disable_4k_align=$(BOARD_PRODUCTIMAGE_SQUASHFS_DISABLE_4K_ALIGN)" >> $(1)) |
| $(if $(PRODUCT_PRODUCT_BASE_FS_PATH),$(hide) echo "product_base_fs_file=$(PRODUCT_PRODUCT_BASE_FS_PATH)" >> $(1)) |
| $(if $(BOARD_PRODUCTIMAGE_PARTITION_RESERVED_SIZE),$(hide) echo "product_reserved_size=$(BOARD_PRODUCTIMAGE_PARTITION_RESERVED_SIZE)" >> $(1)) |
| $(hide) echo "product_selinux_fc=$(SELINUX_FC)" >> $(1) |
| ) |
| $(if $(filter $(2),system_ext),\ |
| $(if $(BOARD_SYSTEM_EXTIMAGE_FILE_SYSTEM_TYPE),$(hide) echo "system_ext_fs_type=$(BOARD_SYSTEM_EXTIMAGE_FILE_SYSTEM_TYPE)" >> $(1)) |
| $(if $(BOARD_SYSTEM_EXTIMAGE_EXTFS_INODE_COUNT),$(hide) echo "system_ext_extfs_inode_count=$(BOARD_SYSTEM_EXTIMAGE_EXTFS_INODE_COUNT)" >> $(1)) |
| $(if $(BOARD_SYSTEM_EXTIMAGE_EXTFS_RSV_PCT),$(hide) echo "system_ext_extfs_rsv_pct=$(BOARD_SYSTEM_EXTIMAGE_EXTFS_RSV_PCT)" >> $(1)) |
| $(if $(BOARD_SYSTEM_EXTIMAGE_PARTITION_SIZE),$(hide) echo "system_ext_size=$(BOARD_SYSTEM_EXTIMAGE_PARTITION_SIZE)" >> $(1)) |
| $(if $(BOARD_SYSTEM_EXTIMAGE_JOURNAL_SIZE),$(hide) echo "system_ext_journal_size=$(BOARD_SYSTEM_EXTIMAGE_JOURNAL_SIZE)" >> $(1)) |
| $(if $(BOARD_SYSTEM_EXTIMAGE_SQUASHFS_COMPRESSOR),$(hide) echo "system_ext_squashfs_compressor=$(BOARD_SYSTEM_EXTIMAGE_SQUASHFS_COMPRESSOR)" >> $(1)) |
| $(if $(BOARD_SYSTEM_EXTIMAGE_SQUASHFS_COMPRESSOR_OPT),$(hide) echo "system_ext_squashfs_compressor_opt=$(BOARD_SYSTEM_EXTIMAGE_SQUASHFS_COMPRESSOR_OPT)" >> $(1)) |
| $(if $(BOARD_SYSTEM_EXTIMAGE_SQUASHFS_BLOCK_SIZE),$(hide) echo "system_ext_squashfs_block_size=$(BOARD_SYSTEM_EXTIMAGE_SQUASHFS_BLOCK_SIZE)" >> $(1)) |
| $(if $(BOARD_SYSTEM_EXTIMAGE_SQUASHFS_DISABLE_4K_ALIGN),$(hide) echo "system_ext_squashfs_disable_4k_align=$(BOARD_SYSTEM_EXTIMAGE_SQUASHFS_DISABLE_4K_ALIGN)" >> $(1)) |
| $(if $(BOARD_SYSTEM_EXTIMAGE_PARTITION_RESERVED_SIZE),$(hide) echo "system_ext_reserved_size=$(BOARD_SYSTEM_EXTIMAGE_PARTITION_RESERVED_SIZE)" >> $(1)) |
| $(hide) echo "system_ext_selinux_fc=$(SELINUX_FC)" >> $(1) |
| ) |
| $(if $(filter $(2),odm),\ |
| $(if $(BOARD_ODMIMAGE_FILE_SYSTEM_TYPE),$(hide) echo "odm_fs_type=$(BOARD_ODMIMAGE_FILE_SYSTEM_TYPE)" >> $(1)) |
| $(if $(BOARD_ODMIMAGE_EXTFS_INODE_COUNT),$(hide) echo "odm_extfs_inode_count=$(BOARD_ODMIMAGE_EXTFS_INODE_COUNT)" >> $(1)) |
| $(if $(BOARD_ODMIMAGE_EXTFS_RSV_PCT),$(hide) echo "odm_extfs_rsv_pct=$(BOARD_ODMIMAGE_EXTFS_RSV_PCT)" >> $(1)) |
| $(if $(BOARD_ODMIMAGE_PARTITION_SIZE),$(hide) echo "odm_size=$(BOARD_ODMIMAGE_PARTITION_SIZE)" >> $(1)) |
| $(if $(BOARD_ODMIMAGE_JOURNAL_SIZE),$(hide) echo "odm_journal_size=$(BOARD_ODMIMAGE_JOURNAL_SIZE)" >> $(1)) |
| $(if $(BOARD_ODMIMAGE_SQUASHFS_COMPRESSOR),$(hide) echo "odm_squashfs_compressor=$(BOARD_ODMIMAGE_SQUASHFS_COMPRESSOR)" >> $(1)) |
| $(if $(BOARD_ODMIMAGE_SQUASHFS_COMPRESSOR_OPT),$(hide) echo "odm_squashfs_compressor_opt=$(BOARD_ODMIMAGE_SQUASHFS_COMPRESSOR_OPT)" >> $(1)) |
| $(if $(BOARD_ODMIMAGE_SQUASHFS_BLOCK_SIZE),$(hide) echo "odm_squashfs_block_size=$(BOARD_ODMIMAGE_SQUASHFS_BLOCK_SIZE)" >> $(1)) |
| $(if $(BOARD_ODMIMAGE_SQUASHFS_DISABLE_4K_ALIGN),$(hide) echo "odm_squashfs_disable_4k_align=$(BOARD_ODMIMAGE_SQUASHFS_DISABLE_4K_ALIGN)" >> $(1)) |
| $(if $(PRODUCT_ODM_BASE_FS_PATH),$(hide) echo "odm_base_fs_file=$(PRODUCT_ODM_BASE_FS_PATH)" >> $(1)) |
| $(if $(BOARD_ODMIMAGE_PARTITION_RESERVED_SIZE),$(hide) echo "odm_reserved_size=$(BOARD_ODMIMAGE_PARTITION_RESERVED_SIZE)" >> $(1)) |
| $(hide) echo "odm_selinux_fc=$(SELINUX_FC)" >> $(1) |
| ) |
| $(if $(filter $(2),oem),\ |
| $(if $(BOARD_OEMIMAGE_PARTITION_SIZE),$(hide) echo "oem_size=$(BOARD_OEMIMAGE_PARTITION_SIZE)" >> $(1)) |
| $(if $(BOARD_OEMIMAGE_JOURNAL_SIZE),$(hide) echo "oem_journal_size=$(BOARD_OEMIMAGE_JOURNAL_SIZE)" >> $(1)) |
| $(if $(BOARD_OEMIMAGE_EXTFS_INODE_COUNT),$(hide) echo "oem_extfs_inode_count=$(BOARD_OEMIMAGE_EXTFS_INODE_COUNT)" >> $(1)) |
| $(if $(BOARD_OEMIMAGE_EXTFS_RSV_PCT),$(hide) echo "oem_extfs_rsv_pct=$(BOARD_OEMIMAGE_EXTFS_RSV_PCT)" >> $(1)) |
| $(hide) echo "oem_selinux_fc=$(SELINUX_FC)" >> $(1) |
| ) |
| $(hide) echo "ext_mkuserimg=$(notdir $(MKEXTUSERIMG))" >> $(1) |
| |
| $(if $(INTERNAL_USERIMAGES_EXT_VARIANT),$(hide) echo "fs_type=$(INTERNAL_USERIMAGES_EXT_VARIANT)" >> $(1)) |
| $(if $(INTERNAL_USERIMAGES_SPARSE_EXT_FLAG),$(hide) echo "extfs_sparse_flag=$(INTERNAL_USERIMAGES_SPARSE_EXT_FLAG)" >> $(1)) |
| $(if $(INTERNAL_USERIMAGES_SPARSE_SQUASHFS_FLAG),$(hide) echo "squashfs_sparse_flag=$(INTERNAL_USERIMAGES_SPARSE_SQUASHFS_FLAG)" >> $(1)) |
| $(if $(INTERNAL_USERIMAGES_SPARSE_F2FS_FLAG),$(hide) echo "f2fs_sparse_flag=$(INTERNAL_USERIMAGES_SPARSE_F2FS_FLAG)" >> $(1)) |
| $(if $(BOARD_EXT4_SHARE_DUP_BLOCKS),$(hide) echo "ext4_share_dup_blocks=$(BOARD_EXT4_SHARE_DUP_BLOCKS)" >> $(1)) |
| $(if $(BOARD_FLASH_LOGICAL_BLOCK_SIZE), $(hide) echo "flash_logical_block_size=$(BOARD_FLASH_LOGICAL_BLOCK_SIZE)" >> $(1)) |
| $(if $(BOARD_FLASH_ERASE_BLOCK_SIZE), $(hide) echo "flash_erase_block_size=$(BOARD_FLASH_ERASE_BLOCK_SIZE)" >> $(1)) |
| $(if $(PRODUCT_SUPPORTS_BOOT_SIGNER),$(hide) echo "boot_signer=$(PRODUCT_SUPPORTS_BOOT_SIGNER)" >> $(1)) |
| $(if $(PRODUCT_SUPPORTS_VERITY),$(hide) echo "verity=$(PRODUCT_SUPPORTS_VERITY)" >> $(1)) |
| $(if $(PRODUCT_SUPPORTS_VERITY),$(hide) echo "verity_key=$(PRODUCT_VERITY_SIGNING_KEY)" >> $(1)) |
| $(if $(PRODUCT_SUPPORTS_VERITY),$(hide) echo "verity_signer_cmd=$(notdir $(VERITY_SIGNER))" >> $(1)) |
| $(if $(PRODUCT_SUPPORTS_VERITY_FEC),$(hide) echo "verity_fec=$(PRODUCT_SUPPORTS_VERITY_FEC)" >> $(1)) |
| $(if $(filter eng, $(TARGET_BUILD_VARIANT)),$(hide) echo "verity_disable=true" >> $(1)) |
| $(if $(PRODUCT_SYSTEM_VERITY_PARTITION),$(hide) echo "system_verity_block_device=$(PRODUCT_SYSTEM_VERITY_PARTITION)" >> $(1)) |
| $(if $(PRODUCT_VENDOR_VERITY_PARTITION),$(hide) echo "vendor_verity_block_device=$(PRODUCT_VENDOR_VERITY_PARTITION)" >> $(1)) |
| $(if $(PRODUCT_PRODUCT_VERITY_PARTITION),$(hide) echo "product_verity_block_device=$(PRODUCT_PRODUCT_VERITY_PARTITION)" >> $(1)) |
| $(if $(PRODUCT_SYSTEM_EXT_VERITY_PARTITION),$(hide) echo "system_ext_verity_block_device=$(PRODUCT_SYSTEM_EXT_VERITY_PARTITION)" >> $(1)) |
| $(if $(PRODUCT_SUPPORTS_VBOOT),$(hide) echo "vboot=$(PRODUCT_SUPPORTS_VBOOT)" >> $(1)) |
| $(if $(PRODUCT_SUPPORTS_VBOOT),$(hide) echo "vboot_key=$(PRODUCT_VBOOT_SIGNING_KEY)" >> $(1)) |
| $(if $(PRODUCT_SUPPORTS_VBOOT),$(hide) echo "vboot_subkey=$(PRODUCT_VBOOT_SIGNING_SUBKEY)" >> $(1)) |
| $(if $(PRODUCT_SUPPORTS_VBOOT),$(hide) echo "futility=$(notdir $(FUTILITY))" >> $(1)) |
| $(if $(PRODUCT_SUPPORTS_VBOOT),$(hide) echo "vboot_signer_cmd=$(VBOOT_SIGNER)" >> $(1)) |
| $(if $(BOARD_AVB_ENABLE),$(hide) echo "avb_avbtool=$(notdir $(AVBTOOL))" >> $(1)) |
| $(if $(BOARD_AVB_ENABLE),$(hide) echo "avb_system_hashtree_enable=$(BOARD_AVB_ENABLE)" >> $(1)) |
| $(if $(BOARD_AVB_ENABLE),$(hide) echo "avb_system_add_hashtree_footer_args=$(BOARD_AVB_SYSTEM_ADD_HASHTREE_FOOTER_ARGS)" >> $(1)) |
| $(if $(BOARD_AVB_ENABLE),\ |
| $(if $(BOARD_AVB_SYSTEM_KEY_PATH),\ |
| $(hide) echo "avb_system_key_path=$(BOARD_AVB_SYSTEM_KEY_PATH)" >> $(1) |
| $(hide) echo "avb_system_algorithm=$(BOARD_AVB_SYSTEM_ALGORITHM)" >> $(1) |
| $(hide) echo "avb_system_rollback_index_location=$(BOARD_AVB_SYSTEM_ROLLBACK_INDEX_LOCATION)" >> $(1))) |
| $(if $(BOARD_AVB_ENABLE),$(hide) echo "avb_system_other_hashtree_enable=$(BOARD_AVB_ENABLE)" >> $(1)) |
| $(if $(BOARD_AVB_ENABLE),$(hide) echo "avb_system_other_add_hashtree_footer_args=$(BOARD_AVB_SYSTEM_OTHER_ADD_HASHTREE_FOOTER_ARGS)" >> $(1)) |
| $(if $(BOARD_AVB_ENABLE),\ |
| $(if $(BOARD_AVB_SYSTEM_OTHER_KEY_PATH),\ |
| $(hide) echo "avb_system_other_key_path=$(BOARD_AVB_SYSTEM_OTHER_KEY_PATH)" >> $(1) |
| $(hide) echo "avb_system_other_algorithm=$(BOARD_AVB_SYSTEM_OTHER_ALGORITHM)" >> $(1))) |
| $(if $(BOARD_AVB_ENABLE),$(hide) echo "avb_vendor_hashtree_enable=$(BOARD_AVB_ENABLE)" >> $(1)) |
| $(if $(BOARD_AVB_ENABLE),$(hide) echo "avb_vendor_add_hashtree_footer_args=$(BOARD_AVB_VENDOR_ADD_HASHTREE_FOOTER_ARGS)" >> $(1)) |
| $(if $(BOARD_AVB_ENABLE),\ |
| $(if $(BOARD_AVB_VENDOR_KEY_PATH),\ |
| $(hide) echo "avb_vendor_key_path=$(BOARD_AVB_VENDOR_KEY_PATH)" >> $(1) |
| $(hide) echo "avb_vendor_algorithm=$(BOARD_AVB_VENDOR_ALGORITHM)" >> $(1) |
| $(hide) echo "avb_vendor_rollback_index_location=$(BOARD_AVB_VENDOR_ROLLBACK_INDEX_LOCATION)" >> $(1))) |
| $(if $(BOARD_AVB_ENABLE),$(hide) echo "avb_product_hashtree_enable=$(BOARD_AVB_ENABLE)" >> $(1)) |
| $(if $(BOARD_AVB_ENABLE),$(hide) echo "avb_product_add_hashtree_footer_args=$(BOARD_AVB_PRODUCT_ADD_HASHTREE_FOOTER_ARGS)" >> $(1)) |
| $(if $(BOARD_AVB_ENABLE),\ |
| $(if $(BOARD_AVB_PRODUCT_KEY_PATH),\ |
| $(hide) echo "avb_product_key_path=$(BOARD_AVB_PRODUCT_KEY_PATH)" >> $(1) |
| $(hide) echo "avb_product_algorithm=$(BOARD_AVB_PRODUCT_ALGORITHM)" >> $(1) |
| $(hide) echo "avb_product_rollback_index_location=$(BOARD_AVB_PRODUCT_ROLLBACK_INDEX_LOCATION)" >> $(1))) |
| $(if $(BOARD_AVB_ENABLE),$(hide) echo "avb_system_ext_hashtree_enable=$(BOARD_AVB_ENABLE)" >> $(1)) |
| $(if $(BOARD_AVB_ENABLE),\ |
| $(hide) echo "avb_system_ext_add_hashtree_footer_args=$(BOARD_AVB_SYSTEM_EXT_ADD_HASHTREE_FOOTER_ARGS)" >> $(1)) |
| $(if $(BOARD_AVB_ENABLE),\ |
| $(if $(BOARD_AVB_SYSTEM_EXT_KEY_PATH),\ |
| $(hide) echo "avb_system_ext_key_path=$(BOARD_AVB_SYSTEM_EXT_KEY_PATH)" >> $(1) |
| $(hide) echo "avb_system_ext_algorithm=$(BOARD_AVB_SYSTEM_EXT_ALGORITHM)" >> $(1) |
| $(hide) echo "avb_system_ext_rollback_index_location=$(BOARD_AVB_SYSTEM_EXT_ROLLBACK_INDEX_LOCATION)" >> $(1))) |
| $(if $(BOARD_AVB_ENABLE),$(hide) echo "avb_odm_hashtree_enable=$(BOARD_AVB_ENABLE)" >> $(1)) |
| $(if $(BOARD_AVB_ENABLE),$(hide) echo "avb_odm_add_hashtree_footer_args=$(BOARD_AVB_ODM_ADD_HASHTREE_FOOTER_ARGS)" >> $(1)) |
| $(if $(BOARD_AVB_ENABLE),\ |
| $(if $(BOARD_AVB_ODM_KEY_PATH),\ |
| $(hide) echo "avb_odm_key_path=$(BOARD_AVB_ODM_KEY_PATH)" >> $(1) |
| $(hide) echo "avb_odm_algorithm=$(BOARD_AVB_ODM_ALGORITHM)" >> $(1) |
| $(hide) echo "avb_odm_rollback_index_location=$(BOARD_AVB_ODM_ROLLBACK_INDEX_LOCATION)" >> $(1))) |
| $(if $(filter true,$(BOARD_USES_RECOVERY_AS_BOOT)),\ |
| $(hide) echo "recovery_as_boot=true" >> $(1)) |
| $(if $(filter true,$(BOARD_BUILD_SYSTEM_ROOT_IMAGE)),\ |
| $(hide) echo "system_root_image=true" >> $(1)) |
| $(hide) echo "root_dir=$(TARGET_ROOT_OUT)" >> $(1) |
| $(if $(filter true,$(PRODUCT_USE_DYNAMIC_PARTITION_SIZE)),\ |
| $(hide) echo "use_dynamic_partition_size=true" >> $(1)) |
| $(if $(3),$(hide) $(foreach kv,$(3),echo "$(kv)" >> $(1);)) |
| endef |
| |
| # $(1): the path of the output dictionary file |
| # $(2): additional "key=value" pairs to append to the dictionary file. |
| PROP_DICTIONARY_IMAGES := oem |
| ifdef BUILDING_CACHE_IMAGE |
| PROP_DICTIONARY_IMAGES += cache |
| endif |
| ifdef BUILDING_SYSTEM_IMAGE |
| PROP_DICTIONARY_IMAGES += system |
| endif |
| ifdef BUILDING_USERDATA_IMAGE |
| PROP_DICTIONARY_IMAGES += userdata |
| endif |
| ifdef BUILDING_VENDOR_IMAGE |
| PROP_DICTIONARY_IMAGES += vendor |
| endif |
| ifdef BUILDING_PRODUCT_IMAGE |
| PROP_DICTIONARY_IMAGES += product |
| endif |
| ifdef BUILDING_SYSTEM_EXT_IMAGE |
| PROP_DICTIONARY_IMAGES += system_ext |
| endif |
| ifdef BUILDING_ODM_IMAGE |
| PROP_DICTIONARY_IMAGES += odm |
| endif |
| define generate-userimage-prop-dictionary |
| $(call generate-image-prop-dictionary,$(1),$(PROP_DICTIONARY_IMAGES),$(2)) |
| endef |
| |
| # $(1): the path of the input dictionary file, where each line has the format key=value |
| # $(2): the key to look up |
| define read-image-prop-dictionary |
| $$(grep '$(2)=' $(1) | cut -f2- -d'=') |
| endef |
| |
| # ----------------------------------------------------------------- |
| # Recovery image |
| |
| # Recovery image exists if we are building recovery, or building recovery as boot. |
| ifdef BUILDING_RECOVERY_IMAGE |
| |
| INTERNAL_RECOVERYIMAGE_FILES := $(filter $(TARGET_RECOVERY_OUT)/%, \ |
| $(ALL_DEFAULT_INSTALLED_MODULES)) |
| |
| INSTALLED_FILES_FILE_RECOVERY := $(PRODUCT_OUT)/installed-files-recovery.txt |
| INSTALLED_FILES_JSON_RECOVERY := $(INSTALLED_FILES_FILE_RECOVERY:.txt=.json) |
| |
| # TODO(b/30414428): Can't depend on INTERNAL_RECOVERYIMAGE_FILES alone like other |
| # INSTALLED_FILES_FILE_* rules. Because currently there're cp/rsync/rm commands in |
| # build-recoveryimage-target, which would touch the files under TARGET_RECOVERY_OUT and race with |
| # the call to FILELIST. |
| ifeq ($(BOARD_USES_RECOVERY_AS_BOOT),true) |
| INSTALLED_BOOTIMAGE_TARGET := $(BUILT_BOOTIMAGE_TARGET) |
| $(INSTALLED_FILES_FILE_RECOVERY): $(INSTALLED_BOOTIMAGE_TARGET) |
| else |
| $(INSTALLED_FILES_FILE_RECOVERY): $(INSTALLED_RECOVERYIMAGE_TARGET) |
| endif |
| |
| $(INSTALLED_FILES_FILE_RECOVERY): .KATI_IMPLICIT_OUTPUTS := $(INSTALLED_FILES_JSON_RECOVERY) |
| $(INSTALLED_FILES_FILE_RECOVERY): $(INTERNAL_RECOVERYIMAGE_FILES) $(FILESLIST) $(FILESLIST_UTIL) |
| @echo Installed file list: $@ |
| @mkdir -p $(dir $@) |
| @rm -f $@ |
| $(hide) $(FILESLIST) $(TARGET_RECOVERY_ROOT_OUT) > $(@:.txt=.json) |
| $(hide) $(FILESLIST_UTIL) -c $(@:.txt=.json) > $@ |
| |
| recovery_sepolicy := \ |
| $(TARGET_RECOVERY_ROOT_OUT)/sepolicy \ |
| $(TARGET_RECOVERY_ROOT_OUT)/plat_file_contexts \ |
| $(TARGET_RECOVERY_ROOT_OUT)/plat_property_contexts \ |
| $(TARGET_RECOVERY_ROOT_OUT)/system_ext_file_contexts \ |
| $(TARGET_RECOVERY_ROOT_OUT)/system_ext_property_contexts \ |
| $(TARGET_RECOVERY_ROOT_OUT)/vendor_file_contexts \ |
| $(TARGET_RECOVERY_ROOT_OUT)/vendor_property_contexts \ |
| $(TARGET_RECOVERY_ROOT_OUT)/odm_file_contexts \ |
| $(TARGET_RECOVERY_ROOT_OUT)/odm_property_contexts \ |
| $(TARGET_RECOVERY_ROOT_OUT)/product_file_contexts \ |
| $(TARGET_RECOVERY_ROOT_OUT)/product_property_contexts |
| |
| # Passed into rsync from non-recovery root to recovery root, to avoid overwriting recovery-specific |
| # SELinux files |
| IGNORE_RECOVERY_SEPOLICY := $(patsubst $(TARGET_RECOVERY_OUT)/%,--exclude=/%,$(recovery_sepolicy)) |
| |
| recovery_kernel := $(INSTALLED_KERNEL_TARGET) # same as a non-recovery system |
| recovery_ramdisk := $(PRODUCT_OUT)/ramdisk-recovery.img |
| recovery_resources_common := $(call include-path-for, recovery)/res |
| |
| # Set recovery_density to a density bucket based on TARGET_SCREEN_DENSITY, PRODUCT_AAPT_PREF_CONFIG, |
| # or mdpi, in order of preference. We support both specific buckets (e.g. xdpi) and numbers, |
| # which get remapped to a bucket. |
| recovery_density := $(or $(TARGET_SCREEN_DENSITY),$(PRODUCT_AAPT_PREF_CONFIG),mdpi) |
| ifeq (,$(filter xxxhdpi xxhdpi xhdpi hdpi mdpi,$(recovery_density))) |
| recovery_density_value := $(patsubst %dpi,%,$(recovery_density)) |
| # We roughly use the medium point between the primary densities to split buckets. |
| # ------160------240------320----------480------------640------ |
| # mdpi hdpi xhdpi xxhdpi xxxhdpi |
| recovery_density := $(strip \ |
| $(or $(if $(filter $(shell echo $$(($(recovery_density_value) >= 560))),1),xxxhdpi),\ |
| $(if $(filter $(shell echo $$(($(recovery_density_value) >= 400))),1),xxhdpi),\ |
| $(if $(filter $(shell echo $$(($(recovery_density_value) >= 280))),1),xhdpi),\ |
| $(if $(filter $(shell echo $$(($(recovery_density_value) >= 200))),1),hdpi,mdpi))) |
| endif |
| |
| ifneq (,$(wildcard $(recovery_resources_common)-$(recovery_density))) |
| recovery_resources_common := $(recovery_resources_common)-$(recovery_density) |
| else |
| recovery_resources_common := $(recovery_resources_common)-xhdpi |
| endif |
| |
| # Select the 18x32 font on high-density devices (xhdpi and up); and the 12x22 font on other devices. |
| # Note that the font selected here can be overridden for a particular device by putting a font.png |
| # in its private recovery resources. |
| ifneq (,$(filter xxxhdpi xxhdpi xhdpi,$(recovery_density))) |
| recovery_font := $(call include-path-for, recovery)/fonts/18x32.png |
| else |
| recovery_font := $(call include-path-for, recovery)/fonts/12x22.png |
| endif |
| |
| |
| # We will only generate the recovery background text images if the variable |
| # TARGET_RECOVERY_UI_SCREEN_WIDTH is defined. For devices with xxxhdpi and xxhdpi, we set the |
| # variable to the commonly used values here, if it hasn't been intialized elsewhere. While for |
| # devices with lower density, they must have TARGET_RECOVERY_UI_SCREEN_WIDTH defined in their |
| # BoardConfig in order to use this feature. |
| ifeq ($(recovery_density),xxxhdpi) |
| TARGET_RECOVERY_UI_SCREEN_WIDTH ?= 1440 |
| else ifeq ($(recovery_density),xxhdpi) |
| TARGET_RECOVERY_UI_SCREEN_WIDTH ?= 1080 |
| endif |
| |
| ifneq ($(TARGET_RECOVERY_UI_SCREEN_WIDTH),) |
| # Subtracts the margin width and menu indent from the screen width; it's safe to be conservative. |
| ifeq ($(TARGET_RECOVERY_UI_MARGIN_WIDTH),) |
| recovery_image_width := $$(($(TARGET_RECOVERY_UI_SCREEN_WIDTH) - 10)) |
| else |
| recovery_image_width := $$(($(TARGET_RECOVERY_UI_SCREEN_WIDTH) - $(TARGET_RECOVERY_UI_MARGIN_WIDTH) - 10)) |
| endif |
| |
| |
| RECOVERY_INSTALLING_TEXT_FILE := $(call intermediates-dir-for,PACKAGING,recovery_text_res)/installing_text.png |
| RECOVERY_INSTALLING_SECURITY_TEXT_FILE := $(dir $(RECOVERY_INSTALLING_TEXT_FILE))/installing_security_text.png |
| RECOVERY_ERASING_TEXT_FILE := $(dir $(RECOVERY_INSTALLING_TEXT_FILE))/erasing_text.png |
| RECOVERY_ERROR_TEXT_FILE := $(dir $(RECOVERY_INSTALLING_TEXT_FILE))/error_text.png |
| RECOVERY_NO_COMMAND_TEXT_FILE := $(dir $(RECOVERY_INSTALLING_TEXT_FILE))/no_command_text.png |
| |
| RECOVERY_CANCEL_WIPE_DATA_TEXT_FILE := $(dir $(RECOVERY_INSTALLING_TEXT_FILE))/cancel_wipe_data_text.png |
| RECOVERY_FACTORY_DATA_RESET_TEXT_FILE := $(dir $(RECOVERY_INSTALLING_TEXT_FILE))/factory_data_reset_text.png |
| RECOVERY_TRY_AGAIN_TEXT_FILE := $(dir $(RECOVERY_INSTALLING_TEXT_FILE))/try_again_text.png |
| RECOVERY_WIPE_DATA_CONFIRMATION_TEXT_FILE := $(dir $(RECOVERY_INSTALLING_TEXT_FILE))/wipe_data_confirmation_text.png |
| RECOVERY_WIPE_DATA_MENU_HEADER_TEXT_FILE := $(dir $(RECOVERY_INSTALLING_TEXT_FILE))/wipe_data_menu_header_text.png |
| |
| generated_recovery_text_files := \ |
| $(RECOVERY_INSTALLING_TEXT_FILE) \ |
| $(RECOVERY_INSTALLING_SECURITY_TEXT_FILE) \ |
| $(RECOVERY_ERASING_TEXT_FILE) \ |
| $(RECOVERY_ERROR_TEXT_FILE) \ |
| $(RECOVERY_NO_COMMAND_TEXT_FILE) \ |
| $(RECOVERY_CANCEL_WIPE_DATA_TEXT_FILE) \ |
| $(RECOVERY_FACTORY_DATA_RESET_TEXT_FILE) \ |
| $(RECOVERY_TRY_AGAIN_TEXT_FILE) \ |
| $(RECOVERY_WIPE_DATA_CONFIRMATION_TEXT_FILE) \ |
| $(RECOVERY_WIPE_DATA_MENU_HEADER_TEXT_FILE) |
| |
| resource_dir := $(call include-path-for, recovery)/tools/recovery_l10n/res/ |
| image_generator_jar := $(HOST_OUT_JAVA_LIBRARIES)/RecoveryImageGenerator.jar |
| zopflipng := $(HOST_OUT_EXECUTABLES)/zopflipng |
| $(RECOVERY_INSTALLING_TEXT_FILE): PRIVATE_SOURCE_FONTS := $(recovery_noto-fonts_dep) $(recovery_roboto-fonts_dep) |
| $(RECOVERY_INSTALLING_TEXT_FILE): PRIVATE_RECOVERY_FONT_FILES_DIR := $(call intermediates-dir-for,PACKAGING,recovery_font_files) |
| $(RECOVERY_INSTALLING_TEXT_FILE): PRIVATE_RESOURCE_DIR := $(resource_dir) |
| $(RECOVERY_INSTALLING_TEXT_FILE): PRIVATE_IMAGE_GENERATOR_JAR := $(image_generator_jar) |
| $(RECOVERY_INSTALLING_TEXT_FILE): PRIVATE_ZOPFLIPNG := $(zopflipng) |
| $(RECOVERY_INSTALLING_TEXT_FILE): PRIVATE_RECOVERY_IMAGE_WIDTH := $(recovery_image_width) |
| $(RECOVERY_INSTALLING_TEXT_FILE): PRIVATE_RECOVERY_BACKGROUND_TEXT_LIST := \ |
| recovery_installing \ |
| recovery_installing_security \ |
| recovery_erasing \ |
| recovery_error \ |
| recovery_no_command |
| $(RECOVERY_INSTALLING_TEXT_FILE): PRIVATE_RECOVERY_WIPE_DATA_TEXT_LIST := \ |
| recovery_cancel_wipe_data \ |
| recovery_factory_data_reset \ |
| recovery_try_again \ |
| recovery_wipe_data_menu_header \ |
| recovery_wipe_data_confirmation |
| $(RECOVERY_INSTALLING_TEXT_FILE): .KATI_IMPLICIT_OUTPUTS := $(filter-out $(RECOVERY_INSTALLING_TEXT_FILE),$(generated_recovery_text_files)) |
| $(RECOVERY_INSTALLING_TEXT_FILE): $(image_generator_jar) $(resource_dir) $(recovery_noto-fonts_dep) $(recovery_roboto-fonts_dep) $(zopflipng) |
| # Prepares the font directory. |
| @rm -rf $(PRIVATE_RECOVERY_FONT_FILES_DIR) |
| @mkdir -p $(PRIVATE_RECOVERY_FONT_FILES_DIR) |
| $(foreach filename,$(PRIVATE_SOURCE_FONTS), cp $(filename) $(PRIVATE_RECOVERY_FONT_FILES_DIR) &&) true |
| @rm -rf $(dir $@) |
| @mkdir -p $(dir $@) |
| $(foreach text_name,$(PRIVATE_RECOVERY_BACKGROUND_TEXT_LIST) $(PRIVATE_RECOVERY_WIPE_DATA_TEXT_LIST), \ |
| $(eval output_file := $(dir $@)/$(patsubst recovery_%,%_text.png,$(text_name))) \ |
| $(eval center_alignment := $(if $(filter $(text_name),$(PRIVATE_RECOVERY_BACKGROUND_TEXT_LIST)), --center_alignment)) \ |
| java -jar $(PRIVATE_IMAGE_GENERATOR_JAR) \ |
| --image_width $(PRIVATE_RECOVERY_IMAGE_WIDTH) \ |
| --text_name $(text_name) \ |
| --font_dir $(PRIVATE_RECOVERY_FONT_FILES_DIR) \ |
| --resource_dir $(PRIVATE_RESOURCE_DIR) \ |
| --output_file $(output_file) $(center_alignment) && \ |
| $(PRIVATE_ZOPFLIPNG) -y --iterations=1 --filters=0 $(output_file) $(output_file) > /dev/null &&) true |
| else |
| RECOVERY_INSTALLING_TEXT_FILE := |
| RECOVERY_INSTALLING_SECURITY_TEXT_FILE := |
| RECOVERY_ERASING_TEXT_FILE := |
| RECOVERY_ERROR_TEXT_FILE := |
| RECOVERY_NO_COMMAND_TEXT_FILE := |
| RECOVERY_CANCEL_WIPE_DATA_TEXT_FILE := |
| RECOVERY_FACTORY_DATA_RESET_TEXT_FILE := |
| RECOVERY_TRY_AGAIN_TEXT_FILE := |
| RECOVERY_WIPE_DATA_CONFIRMATION_TEXT_FILE := |
| RECOVERY_WIPE_DATA_MENU_HEADER_TEXT_FILE := |
| endif # TARGET_RECOVERY_UI_SCREEN_WIDTH |
| |
| ifndef TARGET_PRIVATE_RES_DIRS |
| TARGET_PRIVATE_RES_DIRS := $(wildcard $(TARGET_DEVICE_DIR)/recovery/res) |
| endif |
| recovery_resource_deps := $(shell find $(recovery_resources_common) \ |
| $(TARGET_PRIVATE_RES_DIRS) -type f) |
| recovery_resource_deps += $(generated_recovery_text_files) |
| |
| |
| ifdef TARGET_RECOVERY_FSTAB |
| recovery_fstab := $(TARGET_RECOVERY_FSTAB) |
| else |
| recovery_fstab := $(strip $(wildcard $(TARGET_DEVICE_DIR)/recovery.fstab)) |
| endif |
| ifdef TARGET_RECOVERY_WIPE |
| recovery_wipe := $(TARGET_RECOVERY_WIPE) |
| else |
| recovery_wipe := |
| endif |
| |
| # Traditionally with non-A/B OTA we have: |
| # boot.img + recovery-from-boot.p + recovery-resource.dat = recovery.img. |
| # recovery-resource.dat is needed only if we carry an imgdiff patch of the boot and recovery images |
| # and invoke install-recovery.sh on the first boot post an OTA update. |
| # |
| # We no longer need that if one of the following conditions holds: |
| # a) We carry a full copy of the recovery image - no patching needed |
| # (BOARD_USES_FULL_RECOVERY_IMAGE = true); |
| # b) We build a single image that contains boot and recovery both - no recovery image to install |
| # (BOARD_USES_RECOVERY_AS_BOOT = true); |
| # c) We mount the system image as / and therefore do not have a ramdisk in boot.img |
| # (BOARD_BUILD_SYSTEM_ROOT_IMAGE = true). |
| # d) We include the recovery DTBO image within recovery - not needing the resource file as we |
| # do bsdiff because boot and recovery will contain different number of entries |
| # (BOARD_INCLUDE_RECOVERY_DTBO = true). |
| # e) We include the recovery ACPIO image within recovery - not needing the resource file as we |
| # do bsdiff because boot and recovery will contain different number of entries |
| # (BOARD_INCLUDE_RECOVERY_ACPIO = true). |
| |
| ifeq (,$(filter true, $(BOARD_USES_FULL_RECOVERY_IMAGE) $(BOARD_USES_RECOVERY_AS_BOOT) \ |
| $(BOARD_BUILD_SYSTEM_ROOT_IMAGE) $(BOARD_INCLUDE_RECOVERY_DTBO) $(BOARD_INCLUDE_RECOVERY_ACPIO))) |
| # Named '.dat' so we don't attempt to use imgdiff for patching it. |
| RECOVERY_RESOURCE_ZIP := $(TARGET_OUT_VENDOR)/etc/recovery-resource.dat |
| ALL_DEFAULT_INSTALLED_MODULES += $(RECOVERY_RESOURCE_ZIP) |
| else |
| RECOVERY_RESOURCE_ZIP := |
| endif |
| |
| INSTALLED_RECOVERY_BUILD_PROP_TARGET := $(TARGET_RECOVERY_ROOT_OUT)/prop.default |
| |
| $(INSTALLED_RECOVERY_BUILD_PROP_TARGET): PRIVATE_RECOVERY_UI_PROPERTIES := \ |
| TARGET_RECOVERY_UI_ANIMATION_FPS:animation_fps \ |
| TARGET_RECOVERY_UI_MARGIN_HEIGHT:margin_height \ |
| TARGET_RECOVERY_UI_MARGIN_WIDTH:margin_width \ |
| TARGET_RECOVERY_UI_MENU_UNUSABLE_ROWS:menu_unusable_rows \ |
| TARGET_RECOVERY_UI_PROGRESS_BAR_BASELINE:progress_bar_baseline \ |
| TARGET_RECOVERY_UI_TOUCH_LOW_THRESHOLD:touch_low_threshold \ |
| TARGET_RECOVERY_UI_TOUCH_HIGH_THRESHOLD:touch_high_threshold \ |
| TARGET_RECOVERY_UI_VR_STEREO_OFFSET:vr_stereo_offset |
| |
| # Parses the given list of build variables and writes their values as build properties if defined. |
| # For example, if a target defines `TARGET_RECOVERY_UI_MARGIN_HEIGHT := 100`, |
| # `ro.recovery.ui.margin_height=100` will be appended to the given output file. |
| # $(1): Map from the build variable names to property names |
| # $(2): Output file |
| define append-recovery-ui-properties |
| echo "#" >> $(2) |
| echo "# RECOVERY UI BUILD PROPERTIES" >> $(2) |
| echo "#" >> $(2) |
| $(foreach prop,$(1), \ |
| $(eval _varname := $(call word-colon,1,$(prop))) \ |
| $(eval _propname := $(call word-colon,2,$(prop))) \ |
| $(eval _value := $($(_varname))) \ |
| $(if $(_value), \ |
| echo ro.recovery.ui.$(_propname)=$(_value) >> $(2) &&)) true |
| endef |
| |
| $(INSTALLED_RECOVERY_BUILD_PROP_TARGET): \ |
| $(INSTALLED_DEFAULT_PROP_TARGET) \ |
| $(INSTALLED_VENDOR_DEFAULT_PROP_TARGET) \ |
| $(intermediate_system_build_prop) \ |
| $(INSTALLED_VENDOR_BUILD_PROP_TARGET) \ |
| $(INSTALLED_ODM_BUILD_PROP_TARGET) \ |
| $(INSTALLED_PRODUCT_BUILD_PROP_TARGET) \ |
| $(INSTALLED_SYSTEM_EXT_BUILD_PROP_TARGET) |
| @echo "Target recovery buildinfo: $@" |
| $(hide) mkdir -p $(dir $@) |
| $(hide) rm -f $@ |
| $(hide) cat $(INSTALLED_DEFAULT_PROP_TARGET) > $@ |
| $(hide) cat $(INSTALLED_VENDOR_DEFAULT_PROP_TARGET) >> $@ |
| $(hide) cat $(intermediate_system_build_prop) >> $@ |
| $(hide) cat $(INSTALLED_VENDOR_BUILD_PROP_TARGET) >> $@ |
| $(hide) cat $(INSTALLED_ODM_BUILD_PROP_TARGET) >> $@ |
| $(hide) cat $(INSTALLED_PRODUCT_BUILD_PROP_TARGET) >> $@ |
| $(hide) cat $(INSTALLED_SYSTEM_EXT_BUILD_PROP_TARGET) >> $@ |
| $(call append-recovery-ui-properties,$(PRIVATE_RECOVERY_UI_PROPERTIES),$@) |
| |
| ifdef INSTALLED_VENDOR_BOOTIMAGE_TARGET |
| INTERNAL_RECOVERYIMAGE_ARGS := \ |
| --kernel $(recovery_kernel) --ramdisk $(recovery_ramdisk) |
| ifdef GENERIC_KERNEL_CMDLINE |
| INTERNAL_RECOVERYIMAGE_ARGS += --cmdline "$(GENERIC_KERNEL_CMDLINE)" |
| endif |
| else # INSTALLED_VENDOR_BOOTIMAGE_TARGET not defined |
| INTERNAL_RECOVERYIMAGE_ARGS := \ |
| $(addprefix --second ,$(INSTALLED_2NDBOOTLOADER_TARGET)) \ |
| --ramdisk $(recovery_ramdisk) |
| # Assumes this has already been stripped |
| ifdef INTERNAL_KERNEL_CMDLINE |
| INTERNAL_RECOVERYIMAGE_ARGS += --cmdline "$(INTERNAL_KERNEL_CMDLINE)" |
| endif |
| ifdef BOARD_KERNEL_BASE |
| INTERNAL_RECOVERYIMAGE_ARGS += --base $(BOARD_KERNEL_BASE) |
| endif |
| ifdef BOARD_KERNEL_PAGESIZE |
| INTERNAL_RECOVERYIMAGE_ARGS += --pagesize $(BOARD_KERNEL_PAGESIZE) |
| endif |
| ifdef BOARD_INCLUDE_RECOVERY_DTBO |
| ifdef BOARD_PREBUILT_RECOVERY_DTBOIMAGE |
| INTERNAL_RECOVERYIMAGE_ARGS += --recovery_dtbo $(BOARD_PREBUILT_RECOVERY_DTBOIMAGE) |
| else |
| INTERNAL_RECOVERYIMAGE_ARGS += --recovery_dtbo $(BOARD_PREBUILT_DTBOIMAGE) |
| endif |
| endif # BOARD_INCLUDE_RECOVERY_DTBO |
| ifdef BOARD_INCLUDE_RECOVERY_ACPIO |
| INTERNAL_RECOVERYIMAGE_ARGS += --recovery_acpio $(BOARD_RECOVERY_ACPIO) |
| endif |
| ifdef BOARD_INCLUDE_DTB_IN_BOOTIMG |
| INTERNAL_RECOVERYIMAGE_ARGS += --dtb $(INSTALLED_DTBIMAGE_TARGET) |
| endif |
| endif # INSTALLED_VENDOR_BOOTIMAGE_TARGET not defined |
| |
| $(recovery_ramdisk): $(MKBOOTFS) $(MINIGZIP) \ |
| $(INTERNAL_ROOT_FILES) \ |
| $(INSTALLED_RAMDISK_TARGET) \ |
| $(INTERNAL_RECOVERYIMAGE_FILES) \ |
| $(recovery_sepolicy) \ |
| $(INSTALLED_2NDBOOTLOADER_TARGET) \ |
| $(INSTALLED_RECOVERY_BUILD_PROP_TARGET) \ |
| $(recovery_resource_deps) \ |
| $(recovery_fstab) |
| # Making recovery image |
| mkdir -p $(TARGET_RECOVERY_OUT) |
| mkdir -p $(TARGET_RECOVERY_ROOT_OUT)/sdcard $(TARGET_RECOVERY_ROOT_OUT)/tmp |
| # Copying baseline ramdisk... |
| # Use rsync because "cp -Rf" fails to overwrite broken symlinks on Mac. |
| rsync -a --exclude=sdcard $(IGNORE_RECOVERY_SEPOLICY) $(IGNORE_CACHE_LINK) $(TARGET_ROOT_OUT) $(TARGET_RECOVERY_OUT) |
| # Modifying ramdisk contents... |
| $(if $(filter true,$(BOARD_BUILD_SYSTEM_ROOT_IMAGE)),, \ |
| ln -sf /system/bin/init $(TARGET_RECOVERY_ROOT_OUT)/init) |
| # Removes $(TARGET_RECOVERY_ROOT_OUT)/init*.rc EXCEPT init.recovery*.rc. |
| find $(TARGET_RECOVERY_ROOT_OUT) -maxdepth 1 -name 'init*.rc' -type f -not -name "init.recovery.*.rc" | xargs rm -f |
| cp $(TARGET_ROOT_OUT)/init.recovery.*.rc $(TARGET_RECOVERY_ROOT_OUT)/ 2> /dev/null || true # Ignore error when the src file doesn't exist. |
| mkdir -p $(TARGET_RECOVERY_ROOT_OUT)/res |
| rm -rf $(TARGET_RECOVERY_ROOT_OUT)/res/* |
| cp -rf $(recovery_resources_common)/* $(TARGET_RECOVERY_ROOT_OUT)/res |
| $(foreach recovery_text_file,$(generated_recovery_text_files), \ |
| cp -rf $(recovery_text_file) $(TARGET_RECOVERY_ROOT_OUT)/res/images/ &&) true |
| cp -f $(recovery_font) $(TARGET_RECOVERY_ROOT_OUT)/res/images/font.png |
| $(foreach item,$(TARGET_PRIVATE_RES_DIRS), \ |
| cp -rf $(item) $(TARGET_RECOVERY_ROOT_OUT)/$(newline)) |
| $(foreach item,$(recovery_fstab), \ |
| cp -f $(item) $(TARGET_RECOVERY_ROOT_OUT)/system/etc/recovery.fstab) |
| $(if $(strip $(recovery_wipe)), \ |
| cp -f $(recovery_wipe) $(TARGET_RECOVERY_ROOT_OUT)/system/etc/recovery.wipe) |
| ln -sf prop.default $(TARGET_RECOVERY_ROOT_OUT)/default.prop |
| $(BOARD_RECOVERY_IMAGE_PREPARE) |
| $(MKBOOTFS) -d $(TARGET_OUT) $(TARGET_RECOVERY_ROOT_OUT) | $(MINIGZIP) > $(recovery_ramdisk) |
| |
| # $(1): output file |
| # $(2): kernel file |
| define build-recoveryimage-target |
| $(if $(filter true,$(PRODUCT_SUPPORTS_VBOOT)), \ |
| $(MKBOOTIMG) --kernel $(2) $(MKBOOTIMG_KERNEL_ARG) $(INTERNAL_RECOVERYIMAGE_ARGS) \ |
| $(INTERNAL_MKBOOTIMG_VERSION_ARGS) $(BOARD_MKBOOTIMG_ARGS) \ |
| --output $(1).unsigned, \ |
| $(MKBOOTIMG) --kernel $(2) $(MKBOOTIMG_KERNEL_ARG) $(INTERNAL_RECOVERYIMAGE_ARGS) \ |
| $(INTERNAL_MKBOOTIMG_VERSION_ARGS) $(BOARD_MKBOOTIMG_ARGS) \ |
| --output $(1)) |
| $(if $(filter true,$(PRODUCT_SUPPORTS_BOOT_SIGNER)),\ |
| $(if $(filter true,$(BOARD_USES_RECOVERY_AS_BOOT)),\ |
| $(BOOT_SIGNER) /boot $(1) $(PRODUCT_VERITY_SIGNING_KEY).pk8 $(PRODUCT_VERITY_SIGNING_KEY).x509.pem $(1),\ |
| $(BOOT_SIGNER) /recovery $(1) $(PRODUCT_VERITY_SIGNING_KEY).pk8 $(PRODUCT_VERITY_SIGNING_KEY).x509.pem $(1)\ |
| )\ |
| ) |
| $(if $(filter true,$(PRODUCT_SUPPORTS_VBOOT)), \ |
| $(VBOOT_SIGNER) $(FUTILITY) $(1).unsigned $(PRODUCT_VBOOT_SIGNING_KEY).vbpubk $(PRODUCT_VBOOT_SIGNING_KEY).vbprivk $(PRODUCT_VBOOT_SIGNING_SUBKEY).vbprivk $(1).keyblock $(1)) |
| $(if $(filter true,$(BOARD_USES_RECOVERY_AS_BOOT)), \ |
| $(call assert-max-image-size,$(1),$(call get-hash-image-max-size,$(BOARD_BOOTIMAGE_PARTITION_SIZE))), \ |
| $(call assert-max-image-size,$(1),$(call get-hash-image-max-size,$(BOARD_RECOVERYIMAGE_PARTITION_SIZE)))) |
| $(if $(filter true,$(BOARD_AVB_ENABLE)), \ |
| $(if $(filter true,$(BOARD_USES_RECOVERY_AS_BOOT)), \ |
| $(AVBTOOL) add_hash_footer --image $(1) --partition_size $(BOARD_BOOTIMAGE_PARTITION_SIZE) --partition_name boot $(INTERNAL_AVB_BOOT_SIGNING_ARGS) $(BOARD_AVB_BOOT_ADD_HASH_FOOTER_ARGS),\ |
| $(AVBTOOL) add_hash_footer --image $(1) --partition_size $(BOARD_RECOVERYIMAGE_PARTITION_SIZE) --partition_name recovery $(INTERNAL_AVB_RECOVERY_SIGNING_ARGS) $(BOARD_AVB_RECOVERY_ADD_HASH_FOOTER_ARGS))) |
| endef |
| |
| ifeq ($(BOARD_USES_RECOVERY_AS_BOOT),true) |
| ifeq (true,$(PRODUCT_SUPPORTS_BOOT_SIGNER)) |
| $(INSTALLED_BOOTIMAGE_TARGET) : $(BOOT_SIGNER) |
| endif |
| ifeq (true,$(PRODUCT_SUPPORTS_VBOOT)) |
| $(INSTALLED_BOOTIMAGE_TARGET) : $(VBOOT_SIGNER) |
| endif |
| ifeq (true,$(BOARD_AVB_ENABLE)) |
| $(INSTALLED_BOOTIMAGE_TARGET) : $(AVBTOOL) $(BOARD_AVB_BOOT_KEY_PATH) |
| endif |
| ifdef BOARD_INCLUDE_RECOVERY_DTBO |
| ifdef BOARD_PREBUILT_RECOVERY_DTBOIMAGE |
| $(INSTALLED_BOOTIMAGE_TARGET): $(BOARD_PREBUILT_RECOVERY_DTBOIMAGE) |
| else |
| $(INSTALLED_BOOTIMAGE_TARGET): $(BOARD_PREBUILT_DTBOIMAGE) |
| endif |
| endif |
| ifdef BOARD_INCLUDE_RECOVERY_ACPIO |
| $(INSTALLED_BOOTIMAGE_TARGET): $(BOARD_RECOVERY_ACPIO) |
| endif |
| ifdef BOARD_INCLUDE_DTB_IN_BOOTIMG |
| $(INSTALLED_BOOTIMAGE_TARGET): $(INSTALLED_DTBIMAGE_TARGET) |
| endif |
| |
| $(INSTALLED_BOOTIMAGE_TARGET): $(MKBOOTIMG) $(recovery_ramdisk) \ |
| $(recovery_kernel) |
| $(call pretty,"Target boot image from recovery: $@") |
| $(call build-recoveryimage-target, $@, $(PRODUCT_OUT)/$(subst .img,,$(subst boot,kernel,$(notdir $@)))) |
| endif # BOARD_USES_RECOVERY_AS_BOOT |
| |
| ifdef BOARD_INCLUDE_RECOVERY_DTBO |
| ifdef BOARD_PREBUILT_RECOVERY_DTBOIMAGE |
| $(INSTALLED_RECOVERYIMAGE_TARGET): $(BOARD_PREBUILT_RECOVERY_DTBOIMAGE) |
| else |
| $(INSTALLED_RECOVERYIMAGE_TARGET): $(BOARD_PREBUILT_DTBOIMAGE) |
| endif |
| endif |
| ifdef BOARD_INCLUDE_RECOVERY_ACPIO |
| $(INSTALLED_RECOVERYIMAGE_TARGET): $(BOARD_RECOVERY_ACPIO) |
| endif |
| ifdef BOARD_INCLUDE_DTB_IN_BOOTIMG |
| $(INSTALLED_RECOVERYIMAGE_TARGET): $(INSTALLED_DTBIMAGE_TARGET) |
| endif |
| |
| $(INSTALLED_RECOVERYIMAGE_TARGET): $(MKBOOTIMG) $(recovery_ramdisk) \ |
| $(recovery_kernel) |
| $(call build-recoveryimage-target, $@, $(recovery_kernel)) |
| |
| ifdef RECOVERY_RESOURCE_ZIP |
| $(RECOVERY_RESOURCE_ZIP): $(INSTALLED_RECOVERYIMAGE_TARGET) | $(ZIPTIME) |
| $(hide) mkdir -p $(dir $@) |
| $(hide) find $(TARGET_RECOVERY_ROOT_OUT)/res -type f | sort | zip -0qrjX $@ -@ |
| $(remove-timestamps-from-package) |
| endif |
| |
| .PHONY: recoveryimage-nodeps |
| recoveryimage-nodeps: |
| @echo "make $@: ignoring dependencies" |
| $(call build-recoveryimage-target, $(INSTALLED_RECOVERYIMAGE_TARGET)) |
| |
| else # BUILDING_RECOVERY_IMAGE |
| RECOVERY_RESOURCE_ZIP := |
| endif # BUILDING_RECOVERY_IMAGE |
| |
| .PHONY: recoveryimage |
| recoveryimage: $(INSTALLED_RECOVERYIMAGE_TARGET) $(RECOVERY_RESOURCE_ZIP) |
| |
| ifneq ($(BOARD_NAND_PAGE_SIZE),) |
| $(error MTD device is no longer supported and thus BOARD_NAND_PAGE_SIZE is deprecated.) |
| endif |
| |
| ifneq ($(BOARD_NAND_SPARE_SIZE),) |
| $(error MTD device is no longer supported and thus BOARD_NAND_SPARE_SIZE is deprecated.) |
| endif |
| |
| ifneq ($(BOARD_BUILD_SYSTEM_ROOT_IMAGE),true) |
| # ----------------------------------------------------------------- |
| # the debug ramdisk, which is the original ramdisk plus additional |
| # files: force_debuggable, adb_debug.prop and userdebug sepolicy. |
| # When /force_debuggable is present, /init will load userdebug sepolicy |
| # and property files to allow adb root, if the device is unlocked. |
| |
| ifdef BUILDING_RAMDISK_IMAGE |
| BUILT_DEBUG_RAMDISK_TARGET := $(PRODUCT_OUT)/ramdisk-debug.img |
| INSTALLED_DEBUG_RAMDISK_TARGET := $(BUILT_DEBUG_RAMDISK_TARGET) |
| |
| INTERNAL_DEBUG_RAMDISK_FILES := $(filter $(TARGET_DEBUG_RAMDISK_OUT)/%, \ |
| $(ALL_GENERATED_SOURCES) \ |
| $(ALL_DEFAULT_INSTALLED_MODULES)) |
| |
| # Note: TARGET_DEBUG_RAMDISK_OUT will be $(PRODUCT_OUT)/debug_ramdisk/first_stage_ramdisk, |
| # if BOARD_USES_RECOVERY_AS_BOOT is true. Otherwise, it will be $(PRODUCT_OUT)/debug_ramdisk. |
| # But the root dir of the ramdisk to build is always $(PRODUCT_OUT)/debug_ramdisk. |
| my_debug_ramdisk_root_dir := $(PRODUCT_OUT)/debug_ramdisk |
| |
| INSTALLED_FILES_FILE_DEBUG_RAMDISK := $(PRODUCT_OUT)/installed-files-ramdisk-debug.txt |
| INSTALLED_FILES_JSON_DEBUG_RAMDISK := $(INSTALLED_FILES_FILE_DEBUG_RAMDISK:.txt=.json) |
| $(INSTALLED_FILES_FILE_DEBUG_RAMDISK): .KATI_IMPLICIT_OUTPUTS := $(INSTALLED_FILES_JSON_DEBUG_RAMDISK) |
| $(INSTALLED_FILES_FILE_DEBUG_RAMDISK): DEBUG_RAMDISK_ROOT_DIR := $(my_debug_ramdisk_root_dir) |
| |
| # Cannot just depend on INTERNAL_DEBUG_RAMDISK_FILES like other INSTALLED_FILES_FILE_* rules. |
| # Because ramdisk-debug.img will rsync from either ramdisk.img or ramdisk-recovery.img. |
| # Need to depend on the built ramdisk-debug.img, to get a complete list of the installed files. |
| $(INSTALLED_FILES_FILE_DEBUG_RAMDISK) : $(INSTALLED_DEBUG_RAMDISK_TARGET) |
| $(INSTALLED_FILES_FILE_DEBUG_RAMDISK) : $(INTERNAL_DEBUG_RAMDISK_FILES) $(FILESLIST) $(FILESLIST_UTIL) |
| echo Installed file list: $@ |
| mkdir -p $(dir $@) |
| rm -f $@ |
| $(FILESLIST) $(DEBUG_RAMDISK_ROOT_DIR) > $(@:.txt=.json) |
| $(FILESLIST_UTIL) -c $(@:.txt=.json) > $@ |
| |
| # ramdisk-debug.img will rsync the content from either ramdisk.img or ramdisk-recovery.img, |
| # depending on whether BOARD_USES_RECOVERY_AS_BOOT is set or not. |
| ifeq ($(BOARD_USES_RECOVERY_AS_BOOT),true) |
| my_debug_ramdisk_sync_dir := $(TARGET_RECOVERY_ROOT_OUT) |
| else |
| my_debug_ramdisk_sync_dir := $(TARGET_RAMDISK_OUT) |
| endif # BOARD_USES_RECOVERY_AS_BOOT |
| |
| $(INSTALLED_DEBUG_RAMDISK_TARGET): DEBUG_RAMDISK_SYNC_DIR := $(my_debug_ramdisk_sync_dir) |
| $(INSTALLED_DEBUG_RAMDISK_TARGET): DEBUG_RAMDISK_ROOT_DIR := $(my_debug_ramdisk_root_dir) |
| |
| ifeq ($(BOARD_USES_RECOVERY_AS_BOOT),true) |
| # ramdisk-recovery.img isn't a make target, need to depend on boot.img if it's for recovery. |
| $(INSTALLED_DEBUG_RAMDISK_TARGET): $(INSTALLED_BOOTIMAGE_TARGET) |
| else |
| # Depends on ramdisk.img, note that some target has ramdisk.img but no boot.img, e.g., emulator. |
| $(INSTALLED_DEBUG_RAMDISK_TARGET): $(INSTALLED_RAMDISK_TARGET) |
| endif # BOARD_USES_RECOVERY_AS_BOOT |
| $(INSTALLED_DEBUG_RAMDISK_TARGET): $(MKBOOTFS) $(INTERNAL_DEBUG_RAMDISK_FILES) | $(MINIGZIP) |
| $(call pretty,"Target debug ram disk: $@") |
| mkdir -p $(TARGET_DEBUG_RAMDISK_OUT) |
| touch $(TARGET_DEBUG_RAMDISK_OUT)/force_debuggable |
| rsync -a $(DEBUG_RAMDISK_SYNC_DIR)/ $(DEBUG_RAMDISK_ROOT_DIR) |
| $(MKBOOTFS) -d $(TARGET_OUT) $(DEBUG_RAMDISK_ROOT_DIR) | $(MINIGZIP) > $@ |
| |
| .PHONY: ramdisk_debug-nodeps |
| ramdisk_debug-nodeps: DEBUG_RAMDISK_SYNC_DIR := $(my_debug_ramdisk_sync_dir) |
| ramdisk_debug-nodeps: DEBUG_RAMDISK_ROOT_DIR := $(my_debug_ramdisk_root_dir) |
| ramdisk_debug-nodeps: $(MKBOOTFS) | $(MINIGZIP) |
| echo "make $@: ignoring dependencies" |
| mkdir -p $(TARGET_DEBUG_RAMDISK_OUT) |
| touch $(TARGET_DEBUG_RAMDISK_OUT)/force_debuggable |
| rsync -a $(DEBUG_RAMDISK_SYNC_DIR)/ $(DEBUG_RAMDISK_ROOT_DIR) |
| $(MKBOOTFS) -d $(TARGET_OUT) $(DEBUG_RAMDISK_ROOT_DIR) | $(MINIGZIP) > $(INSTALLED_DEBUG_RAMDISK_TARGET) |
| |
| my_debug_ramdisk_sync_dir := |
| my_debug_ramdisk_root_dir := |
| |
| endif # BUILDING_RAMDISK_IMAGE |
| |
| # ----------------------------------------------------------------- |
| # the boot-debug.img, which is the kernel plus ramdisk-debug.img |
| # |
| # Note: it's intentional to skip signing for boot-debug.img, because it |
| # can only be used if the device is unlocked with verification error. |
| ifneq ($(strip $(TARGET_NO_KERNEL)),true) |
| ifneq ($(strip $(BOARD_KERNEL_BINARIES)),) |
| INSTALLED_DEBUG_BOOTIMAGE_TARGET := $(foreach k,$(subst kernel,boot-debug,$(BOARD_KERNEL_BINARIES)), \ |
| $(PRODUCT_OUT)/$(k).img) |
| else |
| INSTALLED_DEBUG_BOOTIMAGE_TARGET := $(PRODUCT_OUT)/boot-debug.img |
| endif |
| |
| # Replace ramdisk.img in $(MKBOOTIMG) ARGS with ramdisk-debug.img to build boot-debug.img |
| ifeq ($(BOARD_USES_RECOVERY_AS_BOOT),true) |
| INTERNAL_DEBUG_BOOTIMAGE_ARGS := $(subst $(recovery_ramdisk),$(INSTALLED_DEBUG_RAMDISK_TARGET), $(INTERNAL_RECOVERYIMAGE_ARGS)) |
| else |
| INTERNAL_DEBUG_BOOTIMAGE_ARGS := $(subst $(INSTALLED_RAMDISK_TARGET),$(INSTALLED_DEBUG_RAMDISK_TARGET), $(INTERNAL_BOOTIMAGE_ARGS)) |
| endif |
| |
| # If boot.img is chained but boot-debug.img is not signed, libavb in bootloader |
| # will fail to find valid AVB metadata from the end of /boot, thus stop booting. |
| # Using a test key to sign boot-debug.img to continue booting with the mismatched |
| # public key, if the device is unlocked. |
| ifneq ($(BOARD_AVB_BOOT_KEY_PATH),) |
| $(INSTALLED_DEBUG_BOOTIMAGE_TARGET): $(AVBTOOL) $(BOARD_AVB_BOOT_TEST_KEY_PATH) |
| endif |
| |
| BOARD_AVB_BOOT_TEST_KEY_PATH := external/avb/test/data/testkey_rsa2048.pem |
| INTERNAL_AVB_BOOT_TEST_SIGNING_ARGS := --algorithm SHA256_RSA2048 --key $(BOARD_AVB_BOOT_TEST_KEY_PATH) |
| # $(1): the bootimage to sign |
| define test-key-sign-bootimage |
| $(call assert-max-image-size,$(1),$(call get-hash-image-max-size,$(BOARD_BOOTIMAGE_PARTITION_SIZE))) |
| $(AVBTOOL) add_hash_footer \ |
| --image $(1) \ |
| --partition_size $(BOARD_BOOTIMAGE_PARTITION_SIZE) \ |
| --partition_name boot $(INTERNAL_AVB_BOOT_TEST_SIGNING_ARGS) \ |
| $(BOARD_AVB_BOOT_ADD_HASH_FOOTER_ARGS) |
| $(call assert-max-image-size,$(1),$(BOARD_BOOTIMAGE_PARTITION_SIZE)) |
| endef |
| |
| # $(1): output file |
| define build-debug-bootimage-target |
| $(MKBOOTIMG) --kernel $(PRODUCT_OUT)/$(subst .img,,$(subst boot-debug,kernel,$(notdir $(1)))) \ |
| $(INTERNAL_DEBUG_BOOTIMAGE_ARGS) $(INTERNAL_MKBOOTIMG_VERSION_ARGS) $(BOARD_MKBOOTIMG_ARGS) --output $1 |
| $(if $(BOARD_AVB_BOOT_KEY_PATH),$(call test-key-sign-bootimage,$1)) |
| endef |
| |
| # Depends on original boot.img and ramdisk-debug.img, to build the new boot-debug.img |
| $(INSTALLED_DEBUG_BOOTIMAGE_TARGET): $(MKBOOTIMG) $(INSTALLED_BOOTIMAGE_TARGET) $(INSTALLED_DEBUG_RAMDISK_TARGET) |
| $(call pretty,"Target boot debug image: $@") |
| $(call build-debug-bootimage-target, $@) |
| |
| .PHONY: bootimage_debug-nodeps |
| bootimage_debug-nodeps: $(MKBOOTIMG) |
| echo "make $@: ignoring dependencies" |
| $(foreach b,$(INSTALLED_DEBUG_BOOTIMAGE_TARGET),$(call build-debug-bootimage-target,$b)) |
| |
| endif # TARGET_NO_KERNEL |
| |
| ifeq ($(BUILDING_VENDOR_BOOT_IMAGE),true) |
| ifeq ($(BUILDING_RAMDISK_IMAGE),true) |
| # ----------------------------------------------------------------- |
| # vendor debug ramdisk |
| # Combines vendor ramdisk files and debug ramdisk files to build the vendor debug ramdisk. |
| INSTALLED_VENDOR_DEBUG_RAMDISK_TARGET := $(PRODUCT_OUT)/vendor-ramdisk-debug.cpio.gz |
| $(INSTALLED_VENDOR_DEBUG_RAMDISK_TARGET): DEBUG_RAMDISK_FILES := $(INTERNAL_DEBUG_RAMDISK_FILES) |
| $(INSTALLED_VENDOR_DEBUG_RAMDISK_TARGET): VENDOR_RAMDISK_DIR := $(TARGET_VENDOR_RAMDISK_OUT) |
| |
| INTERNAL_VENDOR_DEBUG_RAMDISK_FILES := $(filter $(TARGET_VENDOR_DEBUG_RAMDISK_OUT)/%, \ |
| $(ALL_GENERATED_SOURCES) \ |
| $(ALL_DEFAULT_INSTALLED_MODULES)) |
| |
| # Note: TARGET_VENDOR_DEBUG_RAMDISK_OUT will be $(PRODUCT_OUT)/vendor_debug_ramdisk/first_stage_ramdisk, |
| # if BOARD_USES_RECOVERY_AS_BOOT is true. Otherwise, it will be $(PRODUCT_OUT)/vendor_debug_ramdisk. |
| # But the path of $(VENDOR_DEBUG_RAMDISK_DIR) to build the vendor debug ramdisk, is always |
| # $(PRODUCT_OUT)/vendor_debug_ramdisk. |
| $(INSTALLED_VENDOR_DEBUG_RAMDISK_TARGET): VENDOR_DEBUG_RAMDISK_DIR := $(PRODUCT_OUT)/vendor_debug_ramdisk |
| $(INSTALLED_VENDOR_DEBUG_RAMDISK_TARGET): $(INTERNAL_VENDOR_RAMDISK_TARGET) $(INSTALLED_DEBUG_RAMDISK_TARGET) |
| $(INSTALLED_VENDOR_DEBUG_RAMDISK_TARGET): $(MKBOOTFS) $(INTERNAL_VENDOR_DEBUG_RAMDISK_FILES) | $(MINIGZIP) |
| $(call pretty,"Target vendor debug ram disk: $@") |
| mkdir -p $(TARGET_VENDOR_DEBUG_RAMDISK_OUT) |
| touch $(TARGET_VENDOR_DEBUG_RAMDISK_OUT)/force_debuggable |
| $(foreach debug_file,$(DEBUG_RAMDISK_FILES), \ |
| cp -f $(debug_file) $(subst $(PRODUCT_OUT)/debug_ramdisk,$(PRODUCT_OUT)/vendor_debug_ramdisk,$(debug_file)) &&) true |
| rsync -a $(VENDOR_RAMDISK_DIR)/ $(VENDOR_DEBUG_RAMDISK_DIR) |
| $(MKBOOTFS) -d $(TARGET_OUT) $(VENDOR_DEBUG_RAMDISK_DIR) | $(MINIGZIP) > $@ |
| |
| INSTALLED_FILES_FILE_VENDOR_DEBUG_RAMDISK := $(PRODUCT_OUT)/installed-files-vendor-ramdisk-debug.txt |
| INSTALLED_FILES_JSON_VENDOR_DEBUG_RAMDISK := $(INSTALLED_FILES_FILE_VENDOR_DEBUG_RAMDISK:.txt=.json) |
| $(INSTALLED_FILES_FILE_VENDOR_DEBUG_RAMDISK): .KATI_IMPLICIT_OUTPUTS := $(INSTALLED_FILES_JSON_VENDOR_DEBUG_RAMDISK) |
| $(INSTALLED_FILES_FILE_VENDOR_DEBUG_RAMDISK): VENDOR_DEBUG_RAMDISK_DIR := $(PRODUCT_OUT)/vendor_debug_ramdisk |
| |
| # The vendor debug ramdisk will rsync from $(TARGET_VENDOR_RAMDISK_OUT) and $(INTERNAL_DEBUG_RAMDISK_FILES), |
| # so we have to wait for the vendor debug ramdisk to be built before generating the installed file list. |
| $(INSTALLED_FILES_FILE_VENDOR_DEBUG_RAMDISK): $(INSTALLED_VENDOR_DEBUG_RAMDISK_TARGET) |
| $(INSTALLED_FILES_FILE_VENDOR_DEBUG_RAMDISK): $(INTERNAL_VENDOR_DEBUG_RAMDISK_FILES) $(FILESLIST) $(FILESLIST_UTIL) |
| echo Installed file list: $@ |
| mkdir -p $(dir $@) |
| rm -f $@ |
| $(FILESLIST) $(VENDOR_DEBUG_RAMDISK_DIR) > $(@:.txt=.json) |
| $(FILESLIST_UTIL) -c $(@:.txt=.json) > $@ |
| |
| # ----------------------------------------------------------------- |
| # vendor_boot-debug.img. |
| INSTALLED_VENDOR_DEBUG_BOOTIMAGE_TARGET := $(PRODUCT_OUT)/vendor_boot-debug.img |
| |
| # The util to sign vendor_boot-debug.img with a test key. |
| BOARD_AVB_VENDOR_BOOT_TEST_KEY_PATH := external/avb/test/data/testkey_rsa2048.pem |
| INTERNAL_AVB_VENDOR_BOOT_TEST_SIGNING_ARGS := --algorithm SHA256_RSA2048 --key $(BOARD_AVB_VENDOR_BOOT_TEST_KEY_PATH) |
| # $(1): the vendor bootimage to sign |
| define test-key-sign-vendor-bootimage |
| $(call assert-max-image-size,$(1),$(call get-hash-image-max-size,$(BOARD_VENDOR_BOOTIMAGE_PARTITION_SIZE))) |
| $(AVBTOOL) add_hash_footer \ |
| --image $(1) \ |
| --partition_size $(BOARD_VENDOR_BOOTIMAGE_PARTITION_SIZE) \ |
| --partition_name vendor_boot $(INTERNAL_AVB_VENDOR_BOOT_TEST_SIGNING_ARGS) \ |
| $(BOARD_AVB_VENDOR_BOOT_ADD_HASH_FOOTER_ARGS) |
| $(call assert-max-image-size,$(1),$(BOARD_VENDOR_BOOTIMAGE_PARTITION_SIZE)) |
| endef |
| |
| ifneq ($(BOARD_AVB_VENDOR_BOOT_KEY_PATH),) |
| $(INSTALLED_VENDOR_DEBUG_BOOTIMAGE_TARGET): $(AVBTOOL) $(BOARD_AVB_VENDOR_BOOT_TEST_KEY_PATH) |
| endif |
| |
| # Depends on vendor_boot.img and vendor-ramdisk-debug.cpio.gz to build the new vendor_boot-debug.img |
| $(INSTALLED_VENDOR_DEBUG_BOOTIMAGE_TARGET): $(MKBOOTIMG) $(INSTALLED_VENDOR_BOOTIMAGE_TARGET) $(INSTALLED_VENDOR_DEBUG_RAMDISK_TARGET) |
| $(call pretty,"Target vendor_boot debug image: $@") |
| $(MKBOOTIMG) $(INTERNAL_VENDOR_BOOTIMAGE_ARGS) $(INTERNAL_MKBOOTIMG_VERSION_ARGS) $(BOARD_MKBOOTIMG_ARGS) --vendor_ramdisk $(INSTALLED_VENDOR_DEBUG_RAMDISK_TARGET) --vendor_boot $@ |
| $(call assert-max-image-size,$@,$(BOARD_VENDOR_BOOTIMAGE_PARTITION_SIZE)) |
| $(if $(BOARD_AVB_VENDOR_BOOT_KEY_PATH),$(call test-key-sign-vendor-bootimage,$@)) |
| |
| endif # BUILDING_RAMDISK_IMAGE |
| endif # BUILDING_VENDOR_BOOT_IMAGE |
| |
| # ----------------------------------------------------------------- |
| # The test harness ramdisk, which is based off debug_ramdisk, plus a |
| # few additional test-harness-specific properties in adb_debug.prop. |
| |
| ifdef BUILDING_RAMDISK_IMAGE |
| BUILT_TEST_HARNESS_RAMDISK_TARGET := $(PRODUCT_OUT)/ramdisk-test-harness.img |
| INSTALLED_TEST_HARNESS_RAMDISK_TARGET := $(BUILT_TEST_HARNESS_RAMDISK_TARGET) |
| |
| # rsync the content from ramdisk-debug.img to ramdisk-test-harness.img, then |
| # appends a few test harness specific properties into the adb_debug.prop. |
| TEST_HARNESS_RAMDISK_SYNC_DIR := $(PRODUCT_OUT)/debug_ramdisk |
| TEST_HARNESS_RAMDISK_ROOT_DIR := $(PRODUCT_OUT)/test_harness_ramdisk |
| |
| # The following TARGET_TEST_HARNESS_RAMDISK_OUT will be $(PRODUCT_OUT)/test_harness_ramdisk/first_stage_ramdisk, |
| # if BOARD_USES_RECOVERY_AS_BOOT is true. Otherwise, it will be $(PRODUCT_OUT)/test_harness_ramdisk. |
| TEST_HARNESS_PROP_TARGET := $(TARGET_TEST_HARNESS_RAMDISK_OUT)/adb_debug.prop |
| ADDITIONAL_TEST_HARNESS_PROPERTIES := ro.audio.silent=1 |
| ADDITIONAL_TEST_HARNESS_PROPERTIES += ro.test_harness=1 |
| |
| # $(1): a list of key=value pairs for additional property assignments |
| # $(2): the target .prop file to append the properties from $(1) |
| define append-test-harness-props |
| echo "#" >> $(2); \ |
| echo "# ADDITIONAL TEST HARNESS_PROPERTIES" >> $(2); \ |
| echo "#" >> $(2); |
| $(foreach line,$(1), echo "$(line)" >> $(2);) |
| endef |
| |
| $(INSTALLED_TEST_HARNESS_RAMDISK_TARGET): $(INSTALLED_DEBUG_RAMDISK_TARGET) |
| $(INSTALLED_TEST_HARNESS_RAMDISK_TARGET): $(MKBOOTFS) $(INTERNAL_TEST_HARNESS_RAMDISK_FILES) | $(MINIGZIP) |
| $(call pretty,"Target test harness ram disk: $@") |
| rsync -a $(TEST_HARNESS_RAMDISK_SYNC_DIR)/ $(TEST_HARNESS_RAMDISK_ROOT_DIR) |
| $(call append-test-harness-props,$(ADDITIONAL_TEST_HARNESS_PROPERTIES),$(TEST_HARNESS_PROP_TARGET)) |
| $(MKBOOTFS) -d $(TARGET_OUT) $(TEST_HARNESS_RAMDISK_ROOT_DIR) | $(MINIGZIP) > $@ |
| |
| .PHONY: ramdisk_test_harness-nodeps |
| ramdisk_test_harness-nodeps: $(MKBOOTFS) | $(MINIGZIP) |
| echo "make $@: ignoring dependencies" |
| rsync -a $(TEST_HARNESS_RAMDISK_SYNC_DIR)/ $(TEST_HARNESS_RAMDISK_ROOT_DIR) |
| $(call append-test-harness-props,$(ADDITIONAL_TEST_HARNESS_PROPERTIES),$(TEST_HARNESS_PROP_TARGET)) |
| $(MKBOOTFS) -d $(TARGET_OUT) $(TEST_HARNESS_RAMDISK_ROOT_DIR) | $(MINIGZIP) > $(INSTALLED_TEST_HARNESS_RAMDISK_TARGET) |
| |
| endif # BUILDING_RAMDISK_IMAGE |
| |
| # ----------------------------------------------------------------- |
| # the boot-test-harness.img, which is the kernel plus ramdisk-test-harness.img |
| # |
| # Note: it's intentional to skip signing for boot-test-harness.img, because it |
| # can only be used if the device is unlocked with verification error. |
| ifneq ($(strip $(TARGET_NO_KERNEL)),true) |
| |
| INSTALLED_TEST_HARNESS_BOOTIMAGE_TARGET := $(PRODUCT_OUT)/boot-test-harness.img |
| |
| # Replace ramdisk-debug.img in $(MKBOOTIMG) ARGS with ramdisk-test-harness.img to build boot-test-harness.img |
| INTERNAL_TEST_HARNESS_BOOTIMAGE_ARGS := $(subst $(INSTALLED_DEBUG_RAMDISK_TARGET),$(INSTALLED_TEST_HARNESS_RAMDISK_TARGET),$(INTERNAL_DEBUG_BOOTIMAGE_ARGS)) |
| |
| # If boot.img is chained but boot-test-harness.img is not signed, libavb in bootloader |
| # will fail to find valid AVB metadata from the end of /boot, thus stop booting. |
| # Using a test key to sign boot-test-harness.img to continue booting with the mismatched |
| # public key, if the device is unlocked. |
| ifneq ($(BOARD_AVB_BOOT_KEY_PATH),) |
| $(INSTALLED_TEST_HARNESS_BOOTIMAGE_TARGET): $(AVBTOOL) $(BOARD_AVB_BOOT_TEST_KEY_PATH) |
| endif |
| |
| # Build the new boot-test-harness.img, based on boot-debug.img and ramdisk-test-harness.img. |
| $(INSTALLED_TEST_HARNESS_BOOTIMAGE_TARGET): $(MKBOOTIMG) $(INSTALLED_DEBUG_BOOTIMAGE_TARGET) $(INSTALLED_TEST_HARNESS_RAMDISK_TARGET) |
| $(call pretty,"Target boot test harness image: $@") |
| $(MKBOOTIMG) $(INTERNAL_TEST_HARNESS_BOOTIMAGE_ARGS) $(INTERNAL_MKBOOTIMG_VERSION_ARGS) $(BOARD_MKBOOTIMG_ARGS) --output $@ |
| $(if $(BOARD_AVB_BOOT_KEY_PATH),$(call test-key-sign-bootimage,$@)) |
| |
| .PHONY: bootimage_test_harness-nodeps |
| bootimage_test_harness-nodeps: $(MKBOOTIMG) |
| echo "make $@: ignoring dependencies" |
| $(MKBOOTIMG) $(INTERNAL_TEST_HARNESS_BOOTIMAGE_ARGS) $(INTERNAL_MKBOOTIMG_VERSION_ARGS) $(BOARD_MKBOOTIMG_ARGS) --output $(INSTALLED_TEST_HARNESS_BOOTIMAGE_TARGET) |
| $(if $(BOARD_AVB_BOOT_KEY_PATH),$(call test-key-sign-bootimage,$(INSTALLED_TEST_HARNESS_BOOTIMAGE_TARGET))) |
| |
| endif # TARGET_NO_KERNEL |
| endif # BOARD_BUILD_SYSTEM_ROOT_IMAGE is not true |
| |
| # ----------------------------------------------------------------- |
| # system image |
| # |
| # Remove overridden packages from $(ALL_PDK_FUSION_FILES) |
| PDK_FUSION_SYSIMG_FILES := \ |
| $(filter-out $(foreach p,$(overridden_packages),$(p) %/$(p).apk), \ |
| $(ALL_PDK_FUSION_FILES)) |
| |
| INTERNAL_SYSTEMIMAGE_FILES := $(sort $(filter $(TARGET_OUT)/%, \ |
| $(ALL_GENERATED_SOURCES) \ |
| $(ALL_DEFAULT_INSTALLED_MODULES) \ |
| $(PDK_FUSION_SYSIMG_FILES)) \ |
| $(PDK_FUSION_SYMLINK_STAMP)) |
| |
| FULL_SYSTEMIMAGE_DEPS := $(INTERNAL_SYSTEMIMAGE_FILES) $(INTERNAL_USERIMAGES_DEPS) |
| |
| # ASAN libraries in the system image - add dependency. |
| ASAN_IN_SYSTEM_INSTALLED := $(TARGET_OUT)/asan.tar.bz2 |
| ifneq (,$(filter address, $(SANITIZE_TARGET))) |
| ifeq (true,$(SANITIZE_TARGET_SYSTEM)) |
| FULL_SYSTEMIMAGE_DEPS += $(ASAN_IN_SYSTEM_INSTALLED) |
| endif |
| endif |
| |
| FULL_SYSTEMIMAGE_DEPS += $(INTERNAL_ROOT_FILES) $(INSTALLED_FILES_FILE_ROOT) |
| |
| # ----------------------------------------------------------------- |
| ifdef BUILDING_SYSTEM_IMAGE |
| |
| # installed file list |
| # Depending on anything that $(BUILT_SYSTEMIMAGE) depends on. |
| # We put installed-files.txt ahead of image itself in the dependency graph |
| # so that we can get the size stat even if the build fails due to too large |
| # system image. |
| INSTALLED_FILES_FILE := $(PRODUCT_OUT)/installed-files.txt |
| INSTALLED_FILES_JSON := $(INSTALLED_FILES_FILE:.txt=.json) |
| $(INSTALLED_FILES_FILE): .KATI_IMPLICIT_OUTPUTS := $(INSTALLED_FILES_JSON) |
| $(INSTALLED_FILES_FILE): $(FULL_SYSTEMIMAGE_DEPS) $(FILESLIST) $(FILESLIST_UTIL) |
| @echo Installed file list: $@ |
| @mkdir -p $(dir $@) |
| @rm -f $@ |
| $(hide) $(FILESLIST) $(TARGET_OUT) > $(@:.txt=.json) |
| $(hide) $(FILESLIST_UTIL) -c $(@:.txt=.json) > $@ |
| |
| .PHONY: installed-file-list |
| installed-file-list: $(INSTALLED_FILES_FILE) |
| |
| $(call dist-for-goals, sdk win_sdk sdk_addon, $(INSTALLED_FILES_FILE)) |
| |
| systemimage_intermediates := \ |
| $(call intermediates-dir-for,PACKAGING,systemimage) |
| BUILT_SYSTEMIMAGE := $(systemimage_intermediates)/system.img |
| |
| # Create symlink /system/vendor to /vendor if necessary. |
| ifdef BOARD_USES_VENDORIMAGE |
| define create-system-vendor-symlink |
| $(hide) if [ -d $(TARGET_OUT)/vendor ] && [ ! -h $(TARGET_OUT)/vendor ]; then \ |
| echo 'Non-symlink $(TARGET_OUT)/vendor detected!' 1>&2; \ |
| echo 'You cannot install files to $(TARGET_OUT)/vendor while building a separate vendor.img!' 1>&2; \ |
| exit 1; \ |
| fi |
| $(hide) ln -sf /vendor $(TARGET_OUT)/vendor |
| endef |
| else |
| define create-system-vendor-symlink |
| endef |
| endif |
| |
| # Create symlink /system/product to /product if necessary. |
| ifdef BOARD_USES_PRODUCTIMAGE |
| define create-system-product-symlink |
| $(hide) if [ -d $(TARGET_OUT)/product ] && [ ! -h $(TARGET_OUT)/product ]; then \ |
| echo 'Non-symlink $(TARGET_OUT)/product detected!' 1>&2; \ |
| echo 'You cannot install files to $(TARGET_OUT)/product while building a separate product.img!' 1>&2; \ |
| exit 1; \ |
| fi |
| $(hide) ln -sf /product $(TARGET_OUT)/product |
| endef |
| else |
| define create-system-product-symlink |
| endef |
| endif |
| |
| # Create symlink /system/system_ext to /system_ext if necessary. |
| ifdef BOARD_USES_SYSTEM_EXTIMAGE |
| define create-system-system_ext-symlink |
| $(hide) if [ -d $(TARGET_OUT)/system_ext ] && [ ! -h $(TARGET_OUT)/system_ext ]; then \ |
| echo 'Non-symlink $(TARGET_OUT)/system_ext detected!' 1>&2; \ |
| echo 'You cannot install files to $(TARGET_OUT)/system_ext while building a separate system_ext.img!' 1>&2; \ |
| exit 1; \ |
| fi |
| $(hide) ln -sf /system_ext $(TARGET_OUT)/system_ext |
| endef |
| else |
| define create-system-system_ext-symlink |
| endef |
| endif |
| |
| # $(1): output file |
| define build-systemimage-target |
| @echo "Target system fs image: $(1)" |
| $(call create-system-vendor-symlink) |
| $(call create-system-product-symlink) |
| $(call create-system-system_ext-symlink) |
| @mkdir -p $(dir $(1)) $(systemimage_intermediates) && rm -rf $(systemimage_intermediates)/system_image_info.txt |
| $(call generate-image-prop-dictionary, $(systemimage_intermediates)/system_image_info.txt,system, \ |
| skip_fsck=true) |
| PATH=$(INTERNAL_USERIMAGES_BINARY_PATHS):$$PATH \ |
| $(BUILD_IMAGE) \ |
| $(TARGET_OUT) $(systemimage_intermediates)/system_image_info.txt $(1) $(TARGET_OUT) \ |
| || ( mkdir -p $${DIST_DIR}; \ |
| cp $(INSTALLED_FILES_FILE) $${DIST_DIR}/installed-files-rescued.txt; \ |
| exit 1 ) |
| endef |
| |
| ifeq ($(BOARD_AVB_ENABLE),true) |
| $(BUILT_SYSTEMIMAGE): $(BOARD_AVB_SYSTEM_KEY_PATH) |
| endif |
| $(BUILT_SYSTEMIMAGE): $(FULL_SYSTEMIMAGE_DEPS) $(INSTALLED_FILES_FILE) |
| $(call build-systemimage-target,$@) |
| |
| INSTALLED_SYSTEMIMAGE_TARGET := $(PRODUCT_OUT)/system.img |
| SYSTEMIMAGE_SOURCE_DIR := $(TARGET_OUT) |
| |
| # INSTALLED_SYSTEMIMAGE_TARGET used to be named INSTALLED_SYSTEMIMAGE. Create an alias for backward |
| # compatibility, in case device-specific Makefiles still refer to the old name. |
| INSTALLED_SYSTEMIMAGE := $(INSTALLED_SYSTEMIMAGE_TARGET) |
| |
| # The system partition needs room for the recovery image as well. We |
| # now store the recovery image as a binary patch using the boot image |
| # as the source (since they are very similar). Generate the patch so |
| # we can see how big it's going to be, and include that in the system |
| # image size check calculation. |
| ifneq ($(INSTALLED_BOOTIMAGE_TARGET),) |
| ifneq ($(INSTALLED_RECOVERYIMAGE_TARGET),) |
| ifneq ($(BOARD_USES_FULL_RECOVERY_IMAGE),true) |
| ifneq (,$(filter true, $(BOARD_BUILD_SYSTEM_ROOT_IMAGE) $(BOARD_INCLUDE_RECOVERY_DTBO) $(BOARD_INCLUDE_RECOVERY_ACPIO))) |
| diff_tool := $(HOST_OUT_EXECUTABLES)/bsdiff |
| else |
| diff_tool := $(HOST_OUT_EXECUTABLES)/imgdiff |
| endif |
| intermediates := $(call intermediates-dir-for,PACKAGING,recovery_patch) |
| RECOVERY_FROM_BOOT_PATCH := $(intermediates)/recovery_from_boot.p |
| $(RECOVERY_FROM_BOOT_PATCH): PRIVATE_DIFF_TOOL := $(diff_tool) |
| $(RECOVERY_FROM_BOOT_PATCH): \ |
| $(INSTALLED_RECOVERYIMAGE_TARGET) \ |
| $(INSTALLED_BOOTIMAGE_TARGET) \ |
| $(diff_tool) |
| @echo "Construct recovery from boot" |
| mkdir -p $(dir $@) |
| $(PRIVATE_DIFF_TOOL) $(INSTALLED_BOOTIMAGE_TARGET) $(INSTALLED_RECOVERYIMAGE_TARGET) $@ |
| else # $(BOARD_USES_FULL_RECOVERY_IMAGE) == true |
| RECOVERY_FROM_BOOT_PATCH := $(INSTALLED_RECOVERYIMAGE_TARGET) |
| endif # BOARD_USES_FULL_RECOVERY_IMAGE |
| endif # INSTALLED_RECOVERYIMAGE_TARGET |
| endif # INSTALLED_BOOTIMAGE_TARGET |
| |
| $(INSTALLED_SYSTEMIMAGE_TARGET): $(BUILT_SYSTEMIMAGE) $(RECOVERY_FROM_BOOT_PATCH) |
| @echo "Install system fs image: $@" |
| $(copy-file-to-target) |
| $(hide) $(call assert-max-image-size,$@ $(RECOVERY_FROM_BOOT_PATCH),$(BOARD_SYSTEMIMAGE_PARTITION_SIZE)) |
| |
| systemimage: $(INSTALLED_SYSTEMIMAGE_TARGET) |
| |
| .PHONY: systemimage-nodeps snod |
| systemimage-nodeps snod: $(filter-out systemimage-nodeps snod,$(MAKECMDGOALS)) \ |
| | $(INTERNAL_USERIMAGES_DEPS) |
| @echo "make $@: ignoring dependencies" |
| $(call build-systemimage-target,$(INSTALLED_SYSTEMIMAGE_TARGET)) |
| $(hide) $(call assert-max-image-size,$(INSTALLED_SYSTEMIMAGE_TARGET),$(BOARD_SYSTEMIMAGE_PARTITION_SIZE)) |
| ifeq (true,$(WITH_DEXPREOPT)) |
| $(warning Warning: with dexpreopt enabled, you may need a full rebuild.) |
| endif |
| |
| endif # BUILDING_SYSTEM_IMAGE |
| |
| .PHONY: sync syncsys |
| sync syncsys: $(INTERNAL_SYSTEMIMAGE_FILES) |
| |
| # ----------------------------------------------------------------- |
| ## platform.zip: system, plus other files to be used in PDK fusion build, |
| ## in a zip file |
| ## |
| ## PDK_PLATFORM_ZIP_PRODUCT_BINARIES is used to store specified files to platform.zip. |
| ## The variable will be typically set from BoardConfig.mk. |
| ## Files under out dir will be rejected to prevent possible conflicts with other rules. |
| ifneq (,$(BUILD_PLATFORM_ZIP)) |
| pdk_odex_javalibs := $(strip $(foreach m,$(DEXPREOPT.MODULES.JAVA_LIBRARIES),\ |
| $(if $(filter $(DEXPREOPT.$(m).INSTALLED_STRIPPED),$(ALL_DEFAULT_INSTALLED_MODULES)),$(m)))) |
| pdk_odex_apps := $(strip $(foreach m,$(DEXPREOPT.MODULES.APPS),\ |
| $(if $(filter $(DEXPREOPT.$(m).INSTALLED_STRIPPED),$(ALL_DEFAULT_INSTALLED_MODULES)),$(m)))) |
| pdk_classes_dex := $(strip \ |
| $(foreach m,$(pdk_odex_javalibs),$(call intermediates-dir-for,JAVA_LIBRARIES,$(m),,COMMON)/javalib.jar) \ |
| $(foreach m,$(pdk_odex_apps),$(call intermediates-dir-for,APPS,$(m))/package.apk)) |
| |
| pdk_odex_config_mk := $(PRODUCT_OUT)/pdk_dexpreopt_config.mk |
| $(pdk_odex_config_mk): PRIVATE_JAVA_LIBRARIES := $(pdk_odex_javalibs) |
| $(pdk_odex_config_mk): PRIVATE_APPS := $(pdk_odex_apps) |
| $(pdk_odex_config_mk) : |
| @echo "PDK odex config makefile: $@" |
| $(hide) mkdir -p $(dir $@) |
| $(hide) echo "# Auto-generated. Do not modify." > $@ |
| $(hide) echo "PDK.DEXPREOPT.JAVA_LIBRARIES:=$(PRIVATE_JAVA_LIBRARIES)" >> $@ |
| $(hide) echo "PDK.DEXPREOPT.APPS:=$(PRIVATE_APPS)" >> $@ |
| $(foreach m,$(PRIVATE_JAVA_LIBRARIES),\ |
| $(hide) echo "PDK.DEXPREOPT.$(m).SRC:=$(patsubst $(OUT_DIR)/%,%,$(call intermediates-dir-for,JAVA_LIBRARIES,$(m),,COMMON)/javalib.jar)" >> $@$(newline)\ |
| $(hide) echo "PDK.DEXPREOPT.$(m).DEX_PREOPT:=$(DEXPREOPT.$(m).DEX_PREOPT)" >> $@$(newline)\ |
| $(hide) echo "PDK.DEXPREOPT.$(m).MULTILIB:=$(DEXPREOPT.$(m).MULTILIB)" >> $@$(newline)\ |
| $(hide) echo "PDK.DEXPREOPT.$(m).DEX_PREOPT_FLAGS:=$(DEXPREOPT.$(m).DEX_PREOPT_FLAGS)" >> $@$(newline)\ |
| ) |
| $(foreach m,$(PRIVATE_APPS),\ |
| $(hide) echo "PDK.DEXPREOPT.$(m).SRC:=$(patsubst $(OUT_DIR)/%,%,$(call intermediates-dir-for,APPS,$(m))/package.apk)" >> $@$(newline)\ |
| $(hide) echo "PDK.DEXPREOPT.$(m).DEX_PREOPT:=$(DEXPREOPT.$(m).DEX_PREOPT)" >> $@$(newline)\ |
| $(hide) echo "PDK.DEXPREOPT.$(m).MULTILIB:=$(DEXPREOPT.$(m).MULTILIB)" >> $@$(newline)\ |
| $(hide) echo "PDK.DEXPREOPT.$(m).DEX_PREOPT_FLAGS:=$(DEXPREOPT.$(m).DEX_PREOPT_FLAGS)" >> $@$(newline)\ |
| $(hide) echo "PDK.DEXPREOPT.$(m).PRIVILEGED_MODULE:=$(DEXPREOPT.$(m).PRIVILEGED_MODULE)" >> $@$(newline)\ |
| $(hide) echo "PDK.DEXPREOPT.$(m).VENDOR_MODULE:=$(DEXPREOPT.$(m).VENDOR_MODULE)" >> $@$(newline)\ |
| $(hide) echo "PDK.DEXPREOPT.$(m).TARGET_ARCH:=$(DEXPREOPT.$(m).TARGET_ARCH)" >> $@$(newline)\ |
| $(hide) echo "PDK.DEXPREOPT.$(m).STRIPPED_SRC:=$(patsubst $(PRODUCT_OUT)/%,%,$(DEXPREOPT.$(m).INSTALLED_STRIPPED))" >> $@$(newline)\ |
| ) |
| |
| PDK_PLATFORM_ZIP_PRODUCT_BINARIES := $(filter-out $(OUT_DIR)/%,$(PDK_PLATFORM_ZIP_PRODUCT_BINARIES)) |
| INSTALLED_PLATFORM_ZIP := $(PRODUCT_OUT)/platform.zip |
| |
| $(INSTALLED_PLATFORM_ZIP): PRIVATE_DEX_FILES := $(pdk_classes_dex) |
| $(INSTALLED_PLATFORM_ZIP): PRIVATE_ODEX_CONFIG := $(pdk_odex_config_mk) |
| $(INSTALLED_PLATFORM_ZIP) : $(SOONG_ZIP) |
| # dependencies for the other partitions are defined below after their file lists |
| # are known |
| $(INSTALLED_PLATFORM_ZIP) : $(INTERNAL_SYSTEMIMAGE_FILES) $(pdk_classes_dex) $(pdk_odex_config_mk) $(API_FINGERPRINT) |
| $(call pretty,"Platform zip package: $(INSTALLED_PLATFORM_ZIP)") |
| rm -f $@ $@.lst |
| echo "-C $(PRODUCT_OUT)" >> $@.lst |
| echo "-D $(TARGET_OUT)" >> $@.lst |
| echo "-D $(TARGET_OUT_NOTICE_FILES)" >> $@.lst |
| echo "$(addprefix -f $(TARGET_OUT_UNSTRIPPED)/,$(PDK_SYMBOL_FILES_LIST))" >> $@.lst |
| ifdef BUILDING_VENDOR_IMAGE |
| echo "-D $(TARGET_OUT_VENDOR)" >> $@.lst |
| endif |
| ifdef BUILDING_PRODUCT_IMAGE |
| echo "-D $(TARGET_OUT_PRODUCT)" >> $@.lst |
| endif |
| ifdef BUILDING_SYSTEM_EXT_IMAGE |
| echo "-D $(TARGET_OUT_SYSTEM_EXT)" >> $@.lst |
| endif |
| ifdef BUILDING_ODM_IMAGE |
| echo "-D $(TARGET_OUT_ODM)" >> $@.lst |
| endif |
| ifneq ($(PDK_PLATFORM_JAVA_ZIP_CONTENTS),) |
| echo "-C $(OUT_DIR)" >> $@.lst |
| for f in $(filter-out $(PRIVATE_DEX_FILES),$(addprefix -f $(OUT_DIR)/,$(PDK_PLATFORM_JAVA_ZIP_CONTENTS))); do \ |
| if [ -e $$f ]; then \ |
| echo "-f $$f"; \ |
| fi \ |
| done >> $@.lst |
| endif |
| ifneq ($(PDK_PLATFORM_ZIP_PRODUCT_BINARIES),) |
| echo "-C . $(addprefix -f ,$(PDK_PLATFORM_ZIP_PRODUCT_BINARIES))" >> $@.lst |
| endif |
| @# Add dex-preopt files and config. |
| $(if $(PRIVATE_DEX_FILES),\ |
| echo "-C $(OUT_DIR) $(addprefix -f ,$(PRIVATE_DEX_FILES))") >> $@.lst |
| echo "-C $(dir $(API_FINGERPRINT)) -f $(API_FINGERPRINT)" >> $@.lst |
| touch $(PRODUCT_OUT)/pdk.mk |
| echo "-C $(PRODUCT_OUT) -f $(PRIVATE_ODEX_CONFIG) -f $(PRODUCT_OUT)/pdk.mk" >> $@.lst |
| $(SOONG_ZIP) --ignore_missing_files -o $@ @$@.lst |
| |
| .PHONY: platform |
| platform: $(INSTALLED_PLATFORM_ZIP) |
| |
| .PHONY: platform-java |
| platform-java: platform |
| |
| # Dist the platform.zip |
| ifneq (,$(filter platform platform-java, $(MAKECMDGOALS))) |
| $(call dist-for-goals, platform platform-java, $(INSTALLED_PLATFORM_ZIP)) |
| endif |
| |
| endif # BUILD_PLATFORM_ZIP |
| |
| # ----------------------------------------------------------------- |
| # data partition image |
| INTERNAL_USERDATAIMAGE_FILES := \ |
| $(filter $(TARGET_OUT_DATA)/%,$(ALL_DEFAULT_INSTALLED_MODULES)) |
| |
| ifdef BUILDING_USERDATA_IMAGE |
| userdataimage_intermediates := \ |
| $(call intermediates-dir-for,PACKAGING,userdata) |
| BUILT_USERDATAIMAGE_TARGET := $(PRODUCT_OUT)/userdata.img |
| |
| define build-userdataimage-target |
| $(call pretty,"Target userdata fs image: $(INSTALLED_USERDATAIMAGE_TARGET)") |
| @mkdir -p $(TARGET_OUT_DATA) |
| @mkdir -p $(userdataimage_intermediates) && rm -rf $(userdataimage_intermediates)/userdata_image_info.txt |
| $(call generate-image-prop-dictionary, $(userdataimage_intermediates)/userdata_image_info.txt,userdata,skip_fsck=true) |
| PATH=$(INTERNAL_USERIMAGES_BINARY_PATHS):$$PATH \ |
| $(BUILD_IMAGE) \ |
| $(TARGET_OUT_DATA) $(userdataimage_intermediates)/userdata_image_info.txt \ |
| $(INSTALLED_USERDATAIMAGE_TARGET) $(TARGET_OUT) |
| $(call assert-max-image-size,$(INSTALLED_USERDATAIMAGE_TARGET),$(BOARD_USERDATAIMAGE_PARTITION_SIZE)) |
| endef |
| |
| # We just build this directly to the install location. |
| INSTALLED_USERDATAIMAGE_TARGET := $(BUILT_USERDATAIMAGE_TARGET) |
| INSTALLED_USERDATAIMAGE_TARGET_DEPS := \ |
| $(INTERNAL_USERIMAGES_DEPS) \ |
| $(INTERNAL_USERDATAIMAGE_FILES) |
| $(INSTALLED_USERDATAIMAGE_TARGET): $(INSTALLED_USERDATAIMAGE_TARGET_DEPS) |
| $(build-userdataimage-target) |
| |
| .PHONY: userdataimage-nodeps |
| userdataimage-nodeps: | $(INTERNAL_USERIMAGES_DEPS) |
| $(build-userdataimage-target) |
| |
| endif # BUILDING_USERDATA_IMAGE |
| |
| # ASAN libraries in the system image - build rule. |
| ASAN_OUT_DIRS_FOR_SYSTEM_INSTALL := $(sort $(patsubst $(PRODUCT_OUT)/%,%,\ |
| $(TARGET_OUT_SHARED_LIBRARIES) \ |
| $(2ND_TARGET_OUT_SHARED_LIBRARIES) \ |
| $(TARGET_OUT_VENDOR_SHARED_LIBRARIES) \ |
| $(2ND_TARGET_OUT_VENDOR_SHARED_LIBRARIES))) |
| # Extra options: Enforce the system user for the files to avoid having to change ownership. |
| ASAN_SYSTEM_INSTALL_OPTIONS := --owner=1000 --group=1000 |
| # Note: experimentally, it seems not worth it to try to get "best" compression. We don't save |
| # enough space. |
| $(ASAN_IN_SYSTEM_INSTALLED): $(INSTALLED_USERDATAIMAGE_TARGET_DEPS) |
| tar cfj $(ASAN_IN_SYSTEM_INSTALLED) $(ASAN_SYSTEM_INSTALL_OPTIONS) -C $(TARGET_OUT_DATA)/.. $(ASAN_OUT_DIRS_FOR_SYSTEM_INSTALL) >/dev/null |
| |
| # ----------------------------------------------------------------- |
| # partition table image |
| ifdef BOARD_BPT_INPUT_FILES |
| |
| BUILT_BPTIMAGE_TARGET := $(PRODUCT_OUT)/partition-table.img |
| BUILT_BPTJSON_TARGET := $(PRODUCT_OUT)/partition-table.bpt |
| |
| INTERNAL_BVBTOOL_MAKE_TABLE_ARGS := \ |
| --output_gpt $(BUILT_BPTIMAGE_TARGET) \ |
| --output_json $(BUILT_BPTJSON_TARGET) \ |
| $(foreach file, $(BOARD_BPT_INPUT_FILES), --input $(file)) |
| |
| ifdef BOARD_BPT_DISK_SIZE |
| INTERNAL_BVBTOOL_MAKE_TABLE_ARGS += --disk_size $(BOARD_BPT_DISK_SIZE) |
| endif |
| |
| define build-bptimage-target |
| $(call pretty,"Target partition table image: $(INSTALLED_BPTIMAGE_TARGET)") |
| $(hide) $(BPTTOOL) make_table $(INTERNAL_BVBTOOL_MAKE_TABLE_ARGS) $(BOARD_BPT_MAKE_TABLE_ARGS) |
| endef |
| |
| INSTALLED_BPTIMAGE_TARGET := $(BUILT_BPTIMAGE_TARGET) |
| $(BUILT_BPTJSON_TARGET): $(INSTALLED_BPTIMAGE_TARGET) |
| $(hide) touch -c $(BUILT_BPTJSON_TARGET) |
| |
| $(INSTALLED_BPTIMAGE_TARGET): $(BPTTOOL) $(BOARD_BPT_INPUT_FILES) |
| $(build-bptimage-target) |
| |
| .PHONY: bptimage-nodeps |
| bptimage-nodeps: |
| $(build-bptimage-target) |
| |
| endif # BOARD_BPT_INPUT_FILES |
| |
| # ----------------------------------------------------------------- |
| # cache partition image |
| ifdef BUILDING_CACHE_IMAGE |
| INTERNAL_CACHEIMAGE_FILES := \ |
| $(filter $(TARGET_OUT_CACHE)/%,$(ALL_DEFAULT_INSTALLED_MODULES)) |
| |
| cacheimage_intermediates := \ |
| $(call intermediates-dir-for,PACKAGING,cache) |
| BUILT_CACHEIMAGE_TARGET := $(PRODUCT_OUT)/cache.img |
| |
| define build-cacheimage-target |
| $(call pretty,"Target cache fs image: $(INSTALLED_CACHEIMAGE_TARGET)") |
| @mkdir -p $(TARGET_OUT_CACHE) |
| @mkdir -p $(cacheimage_intermediates) && rm -rf $(cacheimage_intermediates)/cache_image_info.txt |
| $(call generate-image-prop-dictionary, $(cacheimage_intermediates)/cache_image_info.txt,cache,skip_fsck=true) |
| PATH=$(INTERNAL_USERIMAGES_BINARY_PATHS):$$PATH \ |
| $(BUILD_IMAGE) \ |
| $(TARGET_OUT_CACHE) $(cacheimage_intermediates)/cache_image_info.txt \ |
| $(INSTALLED_CACHEIMAGE_TARGET) $(TARGET_OUT) |
| $(call assert-max-image-size,$(INSTALLED_CACHEIMAGE_TARGET),$(BOARD_CACHEIMAGE_PARTITION_SIZE)) |
| endef |
| |
| # We just build this directly to the install location. |
| INSTALLED_CACHEIMAGE_TARGET := $(BUILT_CACHEIMAGE_TARGET) |
| $(INSTALLED_CACHEIMAGE_TARGET): $(INTERNAL_USERIMAGES_DEPS) $(INTERNAL_CACHEIMAGE_FILES) |
| $(build-cacheimage-target) |
| |
| .PHONY: cacheimage-nodeps |
| cacheimage-nodeps: | $(INTERNAL_USERIMAGES_DEPS) |
| $(build-cacheimage-target) |
| |
| else # BUILDING_CACHE_IMAGE |
| # we need to ignore the broken cache link when doing the rsync |
| IGNORE_CACHE_LINK := --exclude=cache |
| endif # BUILDING_CACHE_IMAGE |
| |
| # ----------------------------------------------------------------- |
| # system_other partition image |
| ifdef BUILDING_SYSTEM_OTHER_IMAGE |
| ifeq ($(BOARD_USES_SYSTEM_OTHER_ODEX),true) |
| # Marker file to identify that odex files are installed |
| INSTALLED_SYSTEM_OTHER_ODEX_MARKER := $(TARGET_OUT_SYSTEM_OTHER)/system-other-odex-marker |
| ALL_DEFAULT_INSTALLED_MODULES += $(INSTALLED_SYSTEM_OTHER_ODEX_MARKER) |
| $(INSTALLED_SYSTEM_OTHER_ODEX_MARKER): |
| $(hide) touch $@ |
| endif |
| |
| INTERNAL_SYSTEMOTHERIMAGE_FILES := \ |
| $(filter $(TARGET_OUT_SYSTEM_OTHER)/%,\ |
| $(ALL_DEFAULT_INSTALLED_MODULES)\ |
| $(ALL_PDK_FUSION_FILES)) \ |
| $(PDK_FUSION_SYMLINK_STAMP) |
| |
| # system_other dex files are installed as a side-effect of installing system image files |
| INTERNAL_SYSTEMOTHERIMAGE_FILES += $(INTERNAL_SYSTEMIMAGE_FILES) |
| |
| INSTALLED_FILES_FILE_SYSTEMOTHER := $(PRODUCT_OUT)/installed-files-system-other.txt |
| INSTALLED_FILES_JSON_SYSTEMOTHER := $(INSTALLED_FILES_FILE_SYSTEMOTHER:.txt=.json) |
| $(INSTALLED_FILES_FILE_SYSTEMOTHER): .KATI_IMPLICIT_OUTPUTS := $(INSTALLED_FILES_JSON_SYSTEMOTHER) |
| $(INSTALLED_FILES_FILE_SYSTEMOTHER) : $(INTERNAL_SYSTEMOTHERIMAGE_FILES) $(FILESLIST) $(FILESLIST_UTIL) |
| @echo Installed file list: $@ |
| @mkdir -p $(dir $@) |
| @rm -f $@ |
| $(hide) $(FILESLIST) $(TARGET_OUT_SYSTEM_OTHER) > $(@:.txt=.json) |
| $(hide) $(FILESLIST_UTIL) -c $(@:.txt=.json) > $@ |
| |
| # Determines partition size for system_other.img. |
| ifeq ($(PRODUCT_RETROFIT_DYNAMIC_PARTITIONS),true) |
| ifneq ($(filter system,$(BOARD_SUPER_PARTITION_BLOCK_DEVICES)),) |
| INTERNAL_SYSTEM_OTHER_PARTITION_SIZE := $(BOARD_SUPER_PARTITION_SYSTEM_DEVICE_SIZE) |
| endif |
| endif |
| |
| ifndef INTERNAL_SYSTEM_OTHER_PARTITION_SIZE |
| INTERNAL_SYSTEM_OTHER_PARTITION_SIZE:= $(BOARD_SYSTEMIMAGE_PARTITION_SIZE) |
| endif |
| |
| systemotherimage_intermediates := \ |
| $(call intermediates-dir-for,PACKAGING,system_other) |
| BUILT_SYSTEMOTHERIMAGE_TARGET := $(PRODUCT_OUT)/system_other.img |
| |
| # Note that we assert the size is SYSTEMIMAGE_PARTITION_SIZE since this is the 'b' system image. |
| define build-systemotherimage-target |
| $(call pretty,"Target system_other fs image: $(INSTALLED_SYSTEMOTHERIMAGE_TARGET)") |
| @mkdir -p $(TARGET_OUT_SYSTEM_OTHER) |
| @mkdir -p $(systemotherimage_intermediates) && rm -rf $(systemotherimage_intermediates)/system_other_image_info.txt |
| $(call generate-image-prop-dictionary, $(systemotherimage_intermediates)/system_other_image_info.txt,system,skip_fsck=true) |
| PATH=$(INTERNAL_USERIMAGES_BINARY_PATHS):$$PATH \ |
| $(BUILD_IMAGE) \ |
| $(TARGET_OUT_SYSTEM_OTHER) $(systemotherimage_intermediates)/system_other_image_info.txt \ |
| $(INSTALLED_SYSTEMOTHERIMAGE_TARGET) $(TARGET_OUT) |
| $(call assert-max-image-size,$(INSTALLED_SYSTEMOTHERIMAGE_TARGET),$(BOARD_SYSTEMIMAGE_PARTITION_SIZE)) |
| endef |
| |
| # We just build this directly to the install location. |
| INSTALLED_SYSTEMOTHERIMAGE_TARGET := $(BUILT_SYSTEMOTHERIMAGE_TARGET) |
| ifneq (true,$(SANITIZE_LITE)) |
| # Only create system_other when not building the second stage of a SANITIZE_LITE build. |
| $(INSTALLED_SYSTEMOTHERIMAGE_TARGET): $(INTERNAL_USERIMAGES_DEPS) $(INTERNAL_SYSTEMOTHERIMAGE_FILES) $(INSTALLED_FILES_FILE_SYSTEMOTHER) |
| $(build-systemotherimage-target) |
| endif |
| |
| .PHONY: systemotherimage-nodeps |
| systemotherimage-nodeps: | $(INTERNAL_USERIMAGES_DEPS) |
| $(build-systemotherimage-target) |
| |
| endif # BUILDING_SYSTEM_OTHER_IMAGE |
| |
| |
| # ----------------------------------------------------------------- |
| # vendor partition image |
| ifdef BUILDING_VENDOR_IMAGE |
| INTERNAL_VENDORIMAGE_FILES := \ |
| $(filter $(TARGET_OUT_VENDOR)/%,\ |
| $(ALL_DEFAULT_INSTALLED_MODULES)\ |
| $(ALL_PDK_FUSION_FILES)) \ |
| $(PDK_FUSION_SYMLINK_STAMP) |
| |
| # platform.zip depends on $(INTERNAL_VENDORIMAGE_FILES). |
| $(INSTALLED_PLATFORM_ZIP) : $(INTERNAL_VENDORIMAGE_FILES) |
| |
| INSTALLED_FILES_FILE_VENDOR := $(PRODUCT_OUT)/installed-files-vendor.txt |
| INSTALLED_FILES_JSON_VENDOR := $(INSTALLED_FILES_FILE_VENDOR:.txt=.json) |
| $(INSTALLED_FILES_FILE_VENDOR): .KATI_IMPLICIT_OUTPUTS := $(INSTALLED_FILES_JSON_VENDOR) |
| $(INSTALLED_FILES_FILE_VENDOR) : $(INTERNAL_VENDORIMAGE_FILES) $(FILESLIST) $(FILESLIST_UTIL) |
| @echo Installed file list: $@ |
| @mkdir -p $(dir $@) |
| @rm -f $@ |
| $(hide) $(FILESLIST) $(TARGET_OUT_VENDOR) > $(@:.txt=.json) |
| $(hide) $(FILESLIST_UTIL) -c $(@:.txt=.json) > $@ |
| |
| # Create symlink /vendor/odm to /odm if necessary. |
| ifdef BOARD_USES_ODMIMAGE |
| define create-vendor-odm-symlink |
| $(hide) if [ -d $(TARGET_OUT_VENDOR)/odm ] && [ ! -h $(TARGET_OUT_VENDOR)/odm ]; then \ |
| echo 'Non-symlink $(TARGET_OUT_VENDOR)/odm detected!' 1>&2; \ |
| echo 'You cannot install files to $(TARGET_OUT_VENDOR)/odm while building a separate odm.img!' 1>&2; \ |
| exit 1; \ |
| fi |
| $(hide) ln -sf /odm $(TARGET_OUT_VENDOR)/odm |
| endef |
| else |
| define create-vendor-odm-symlink |
| endef |
| endif |
| |
| vendorimage_intermediates := \ |
| $(call intermediates-dir-for,PACKAGING,vendor) |
| BUILT_VENDORIMAGE_TARGET := $(PRODUCT_OUT)/vendor.img |
| define build-vendorimage-target |
| $(call pretty,"Target vendor fs image: $(INSTALLED_VENDORIMAGE_TARGET)") |
| @mkdir -p $(TARGET_OUT_VENDOR) |
| $(call create-vendor-odm-symlink) |
| @mkdir -p $(vendorimage_intermediates) && rm -rf $(vendorimage_intermediates)/vendor_image_info.txt |
| $(call generate-image-prop-dictionary, $(vendorimage_intermediates)/vendor_image_info.txt,vendor,skip_fsck=true) |
| PATH=$(INTERNAL_USERIMAGES_BINARY_PATHS):$$PATH \ |
| $(BUILD_IMAGE) \ |
| $(TARGET_OUT_VENDOR) $(vendorimage_intermediates)/vendor_image_info.txt \ |
| $(INSTALLED_VENDORIMAGE_TARGET) $(TARGET_OUT) |
| $(call assert-max-image-size,$(INSTALLED_VENDORIMAGE_TARGET),$(BOARD_VENDORIMAGE_PARTITION_SIZE)) |
| endef |
| |
| # We just build this directly to the install location. |
| INSTALLED_VENDORIMAGE_TARGET := $(BUILT_VENDORIMAGE_TARGET) |
| $(INSTALLED_VENDORIMAGE_TARGET): \ |
| $(INTERNAL_USERIMAGES_DEPS) \ |
| $(INTERNAL_VENDORIMAGE_FILES) \ |
| $(INSTALLED_FILES_FILE_VENDOR) |
| $(build-vendorimage-target) |
| |
| .PHONY: vendorimage-nodeps vnod |
| vendorimage-nodeps vnod: | $(INTERNAL_USERIMAGES_DEPS) |
| $(build-vendorimage-target) |
| |
| sync: $(INTERNAL_VENDORIMAGE_FILES) |
| |
| else ifdef BOARD_PREBUILT_VENDORIMAGE |
| INSTALLED_VENDORIMAGE_TARGET := $(PRODUCT_OUT)/vendor.img |
| $(eval $(call copy-one-file,$(BOARD_PREBUILT_VENDORIMAGE),$(INSTALLED_VENDORIMAGE_TARGET))) |
| endif |
| |
| # ----------------------------------------------------------------- |
| # product partition image |
| ifdef BUILDING_PRODUCT_IMAGE |
| INTERNAL_PRODUCTIMAGE_FILES := \ |
| $(filter $(TARGET_OUT_PRODUCT)/%,\ |
| $(ALL_DEFAULT_INSTALLED_MODULES)\ |
| $(ALL_PDK_FUSION_FILES)) \ |
| $(PDK_FUSION_SYMLINK_STAMP) |
| |
| # platform.zip depends on $(INTERNAL_PRODUCTIMAGE_FILES). |
| $(INSTALLED_PLATFORM_ZIP) : $(INTERNAL_PRODUCTIMAGE_FILES) |
| |
| INSTALLED_FILES_FILE_PRODUCT := $(PRODUCT_OUT)/installed-files-product.txt |
| INSTALLED_FILES_JSON_PRODUCT := $(INSTALLED_FILES_FILE_PRODUCT:.txt=.json) |
| $(INSTALLED_FILES_FILE_PRODUCT): .KATI_IMPLICIT_OUTPUTS := $(INSTALLED_FILES_JSON_PRODUCT) |
| $(INSTALLED_FILES_FILE_PRODUCT) : $(INTERNAL_PRODUCTIMAGE_FILES) $(FILESLIST) $(FILESLIST_UTIL) |
| @echo Installed file list: $@ |
| @mkdir -p $(dir $@) |
| @rm -f $@ |
| $(hide) $(FILESLIST) $(TARGET_OUT_PRODUCT) > $(@:.txt=.json) |
| $(hide) $(FILESLIST_UTIL) -c $(@:.txt=.json) > $@ |
| |
| productimage_intermediates := \ |
| $(call intermediates-dir-for,PACKAGING,product) |
| BUILT_PRODUCTIMAGE_TARGET := $(PRODUCT_OUT)/product.img |
| define build-productimage-target |
| $(call pretty,"Target product fs image: $(INSTALLED_PRODUCTIMAGE_TARGET)") |
| @mkdir -p $(TARGET_OUT_PRODUCT) |
| @mkdir -p $(productimage_intermediates) && rm -rf $(productimage_intermediates)/product_image_info.txt |
| $(call generate-image-prop-dictionary, $(productimage_intermediates)/product_image_info.txt,product,skip_fsck=true) |
| PATH=$(INTERNAL_USERIMAGES_BINARY_PATHS):$$PATH \ |
| $(BUILD_IMAGE) \ |
| $(TARGET_OUT_PRODUCT) $(productimage_intermediates)/product_image_info.txt \ |
| $(INSTALLED_PRODUCTIMAGE_TARGET) $(TARGET_OUT) |
| $(call assert-max-image-size,$(INSTALLED_PRODUCTIMAGE_TARGET),$(BOARD_PRODUCTIMAGE_PARTITION_SIZE)) |
| endef |
| |
| # We just build this directly to the install location. |
| INSTALLED_PRODUCTIMAGE_TARGET := $(BUILT_PRODUCTIMAGE_TARGET) |
| $(INSTALLED_PRODUCTIMAGE_TARGET): \ |
| $(INTERNAL_USERIMAGES_DEPS) \ |
| $(INTERNAL_PRODUCTIMAGE_FILES) \ |
| $(INSTALLED_FILES_FILE_PRODUCT) |
| $(build-productimage-target) |
| |
| .PHONY: productimage-nodeps pnod |
| productimage-nodeps pnod: | $(INTERNAL_USERIMAGES_DEPS) |
| $(build-productimage-target) |
| |
| sync: $(INTERNAL_PRODUCTIMAGE_FILES) |
| |
| else ifdef BOARD_PREBUILT_PRODUCTIMAGE |
| INSTALLED_PRODUCTIMAGE_TARGET := $(PRODUCT_OUT)/product.img |
| $(eval $(call copy-one-file,$(BOARD_PREBUILT_PRODUCTIMAGE),$(INSTALLED_PRODUCTIMAGE_TARGET))) |
| endif |
| |
| # ----------------------------------------------------------------- |
| # system_ext partition image |
| ifdef BUILDING_SYSTEM_EXT_IMAGE |
| INTERNAL_SYSTEM_EXTIMAGE_FILES := \ |
| $(filter $(TARGET_OUT_SYSTEM_EXT)/%,\ |
| $(ALL_DEFAULT_INSTALLED_MODULES)\ |
| $(ALL_PDK_FUSION_FILES)) \ |
| $(PDK_FUSION_SYMLINK_STAMP) |
| |
| # platform.zip depends on $(INTERNAL_SYSTEM_EXTIMAGE_FILES). |
| $(INSTALLED_PLATFORM_ZIP) : $(INTERNAL_SYSTEM_EXTIMAGE_FILES) |
| |
| INSTALLED_FILES_FILE_SYSTEM_EXT := $(PRODUCT_OUT)/installed-files-system_ext.txt |
| INSTALLED_FILES_JSON_SYSTEM_EXT := $(INSTALLED_FILES_FILE_SYSTEM_EXT:.txt=.json) |
| $(INSTALLED_FILES_FILE_SYSTEM_EXT): .KATI_IMPLICIT_OUTPUTS := $(INSTALLED_FILES_JSON_SYSTEM_EXT) |
| $(INSTALLED_FILES_FILE_SYSTEM_EXT) : $(INTERNAL_SYSTEM_EXTIMAGE_FILES) $(FILESLIST) $(FILESLIST_UTIL) |
| @echo Installed file list: $@ |
| @mkdir -p $(dir $@) |
| @rm -f $@ |
| $(hide) $(FILESLIST) $(TARGET_OUT_SYSTEM_EXT) > $(@:.txt=.json) |
| $(hide) $(FILESLIST_UTIL) -c $(@:.txt=.json) > $@ |
| |
| system_extimage_intermediates := \ |
| $(call intermediates-dir-for,PACKAGING,system_ext) |
| BUILT_SYSTEM_EXTIMAGE_TARGET := $(PRODUCT_OUT)/system_ext.img |
| define build-system_extimage-target |
| $(call pretty,"Target system_ext fs image: $(INSTALLED_SYSTEM_EXTIMAGE_TARGET)") |
| @mkdir -p $(TARGET_OUT_SYSTEM_EXT) |
| @mkdir -p $(system_extimage_intermediates) && rm -rf $(system_extimage_intermediates)/system_ext_image_info.txt |
| $(call generate-image-prop-dictionary, $(system_extimage_intermediates)/system_ext_image_info.txt,system_ext, skip_fsck=true) |
| PATH=$(INTERNAL_USERIMAGES_BINARY_PATHS):$$PATH \ |
| $(BUILD_IMAGE) \ |
| $(TARGET_OUT_SYSTEM_EXT) \ |
| $(system_extimage_intermediates)/system_ext_image_info.txt \ |
| $(INSTALLED_SYSTEM_EXTIMAGE_TARGET) \ |
| $(TARGET_OUT) |
| $(call assert-max-image-size,$(INSTALLED_PRODUCT_SERVICESIMAGE_TARGET),$(BOARD_PRODUCT_SERVICESIMAGE_PARTITION_SIZE)) |
| endef |
| |
| # We just build this directly to the install location. |
| INSTALLED_SYSTEM_EXTIMAGE_TARGET := $(BUILT_SYSTEM_EXTIMAGE_TARGET) |
| $(INSTALLED_SYSTEM_EXTIMAGE_TARGET): \ |
| $(INTERNAL_USERIMAGES_DEPS) \ |
| $(INTERNAL_SYSTEM_EXTIMAGE_FILES) \ |
| $(INSTALLED_FILES_FILE_SYSTEM_EXT) |
| $(build-system_extimage-target) |
| |
| .PHONY: systemextimage-nodeps senod |
| systemextimage-nodeps senod: | $(INTERNAL_USERIMAGES_DEPS) |
| $(build-system_extimage-target) |
| |
| sync: $(INTERNAL_SYSTEM_EXTIMAGE_FILES) |
| |
| else ifdef BOARD_PREBUILT_SYSTEM_EXTIMAGE |
| INSTALLED_SYSTEM_EXTIMAGE_TARGET := $(PRODUCT_OUT)/system_ext.img |
| $(eval $(call copy-one-file,$(BOARD_PREBUILT_SYSTEM_EXTIMAGE),$(INSTALLED_SYSTEM_EXTIMAGE_TARGET))) |
| endif |
| |
| # ----------------------------------------------------------------- |
| # odm partition image |
| ifdef BUILDING_ODM_IMAGE |
| INTERNAL_ODMIMAGE_FILES := \ |
| $(filter $(TARGET_OUT_ODM)/%,\ |
| $(ALL_DEFAULT_INSTALLED_MODULES)\ |
| $(ALL_PDK_FUSION_FILES)) \ |
| $(PDK_FUSION_SYMLINK_STAMP) |
| # platform.zip depends on $(INTERNAL_ODMIMAGE_FILES). |
| $(INSTALLED_PLATFORM_ZIP) : $(INTERNAL_ODMIMAGE_FILES) |
| |
| INSTALLED_FILES_FILE_ODM := $(PRODUCT_OUT)/installed-files-odm.txt |
| INSTALLED_FILES_JSON_ODM := $(INSTALLED_FILES_FILE_ODM:.txt=.json) |
| $(INSTALLED_FILES_FILE_ODM): .KATI_IMPLICIT_OUTPUTS := $(INSTALLED_FILES_JSON_ODM) |
| $(INSTALLED_FILES_FILE_ODM) : $(INTERNAL_ODMIMAGE_FILES) $(FILESLIST) $(FILESLIST_UTIL) |
| @echo Installed file list: $@ |
| @mkdir -p $(dir $@) |
| @rm -f $@ |
| $(hide) $(FILESLIST) $(TARGET_OUT_ODM) > $(@:.txt=.json) |
| $(hide) $(FILESLIST_UTIL) -c $(@:.txt=.json) > $@ |
| |
| odmimage_intermediates := \ |
| $(call intermediates-dir-for,PACKAGING,odm) |
| BUILT_ODMIMAGE_TARGET := $(PRODUCT_OUT)/odm.img |
| define build-odmimage-target |
| $(call pretty,"Target odm fs image: $(INSTALLED_ODMIMAGE_TARGET)") |
| @mkdir -p $(TARGET_OUT_ODM) |
| @mkdir -p $(odmimage_intermediates) && rm -rf $(odmimage_intermediates)/odm_image_info.txt |
| $(call generate-userimage-prop-dictionary, $(odmimage_intermediates)/odm_image_info.txt, skip_fsck=true) |
| PATH=$(INTERNAL_USERIMAGES_BINARY_PATHS):$$PATH \ |
| $(BUILD_IMAGE) \ |
| $(TARGET_OUT_ODM) $(odmimage_intermediates)/odm_image_info.txt \ |
| $(INSTALLED_ODMIMAGE_TARGET) $(TARGET_OUT) |
| $(call assert-max-image-size,$(INSTALLED_ODMIMAGE_TARGET),$(BOARD_ODMIMAGE_PARTITION_SIZE)) |
| endef |
| |
| # We just build this directly to the install location. |
| INSTALLED_ODMIMAGE_TARGET := $(BUILT_ODMIMAGE_TARGET) |
| $(INSTALLED_ODMIMAGE_TARGET): \ |
| $(INTERNAL_USERIMAGES_DEPS) \ |
| $(INTERNAL_ODMIMAGE_FILES) \ |
| $(INSTALLED_FILES_FILE_ODM) |
| $(build-odmimage-target) |
| |
| .PHONY: odmimage-nodeps onod |
| odmimage-nodeps onod: | $(INTERNAL_USERIMAGES_DEPS) |
| $(build-odmimage-target) |
| |
| sync: $(INTERNAL_ODMIMAGE_FILES) |
| |
| else ifdef BOARD_PREBUILT_ODMIMAGE |
| INSTALLED_ODMIMAGE_TARGET := $(PRODUCT_OUT)/odm.img |
| $(eval $(call copy-one-file,$(BOARD_PREBUILT_ODMIMAGE),$(INSTALLED_ODMIMAGE_TARGET))) |
| endif |
| |
| # ----------------------------------------------------------------- |
| # dtbo image |
| ifdef BOARD_PREBUILT_DTBOIMAGE |
| INSTALLED_DTBOIMAGE_TARGET := $(PRODUCT_OUT)/dtbo.img |
| |
| ifeq ($(BOARD_AVB_ENABLE),true) |
| $(INSTALLED_DTBOIMAGE_TARGET): $(BOARD_PREBUILT_DTBOIMAGE) $(AVBTOOL) $(BOARD_AVB_DTBO_KEY_PATH) |
| cp $(BOARD_PREBUILT_DTBOIMAGE) $@ |
| $(AVBTOOL) add_hash_footer \ |
| --image $@ \ |
| --partition_size $(BOARD_DTBOIMG_PARTITION_SIZE) \ |
| --partition_name dtbo $(INTERNAL_AVB_DTBO_SIGNING_ARGS) \ |
| $(BOARD_AVB_DTBO_ADD_HASH_FOOTER_ARGS) |
| else |
| $(INSTALLED_DTBOIMAGE_TARGET): $(BOARD_PREBUILT_DTBOIMAGE) |
| cp $(BOARD_PREBUILT_DTBOIMAGE) $@ |
| endif |
| |
| endif # BOARD_PREBUILT_DTBOIMAGE |
| |
| # Returns a list of image targets corresponding to the given list of partitions. For example, it |
| # returns "$(INSTALLED_PRODUCTIMAGE_TARGET)" for "product", or "$(INSTALLED_SYSTEMIMAGE_TARGET) |
| # $(INSTALLED_VENDORIMAGE_TARGET)" for "system vendor". |
| # (1): list of partitions like "system", "vendor" or "system product system_ext". |
| define images-for-partitions |
| $(strip $(foreach item,$(1),$(INSTALLED_$(call to-upper,$(item))IMAGE_TARGET))) |
| endef |
| |
| # ----------------------------------------------------------------- |
| # vbmeta image |
| ifeq ($(BOARD_AVB_ENABLE),true) |
| |
| BUILT_VBMETAIMAGE_TARGET := $(PRODUCT_OUT)/vbmeta.img |
| AVB_CHAIN_KEY_DIR := $(TARGET_OUT_INTERMEDIATES)/avb_chain_keys |
| |
| ifdef BOARD_AVB_KEY_PATH |
| $(if $(BOARD_AVB_ALGORITHM),,$(error BOARD_AVB_ALGORITHM is not defined)) |
| else |
| # If key path isn't specified, use the 4096-bit test key. |
| BOARD_AVB_ALGORITHM := SHA256_RSA4096 |
| BOARD_AVB_KEY_PATH := external/avb/test/data/testkey_rsa4096.pem |
| endif |
| |
| # AVB signing for system_other.img. |
| ifdef BUILDING_SYSTEM_OTHER_IMAGE |
| ifdef BOARD_AVB_SYSTEM_OTHER_KEY_PATH |
| $(if $(BOARD_AVB_SYSTEM_OTHER_ALGORITHM),,$(error BOARD_AVB_SYSTEM_OTHER_ALGORITHM is not defined)) |
| else |
| # If key path isn't specified, use the same key as BOARD_AVB_KEY_PATH. |
| BOARD_AVB_SYSTEM_OTHER_KEY_PATH := $(BOARD_AVB_KEY_PATH) |
| BOARD_AVB_SYSTEM_OTHER_ALGORITHM := $(BOARD_AVB_ALGORITHM) |
| endif |
| |
| $(INSTALLED_PRODUCT_SYSTEM_OTHER_AVBKEY_TARGET): $(AVBTOOL) $(BOARD_AVB_SYSTEM_OTHER_KEY_PATH) |
| @echo Extracting system_other avb key: $@ |
| @rm -f $@ |
| @mkdir -p $(dir $@) |
| $(AVBTOOL) extract_public_key --key $(BOARD_AVB_SYSTEM_OTHER_KEY_PATH) --output $@ |
| |
| ifndef BOARD_AVB_SYSTEM_OTHER_ROLLBACK_INDEX |
| BOARD_AVB_SYSTEM_OTHER_ROLLBACK_INDEX := $(PLATFORM_SECURITY_PATCH_TIMESTAMP) |
| endif |
| |
| BOARD_AVB_SYSTEM_OTHER_ADD_HASHTREE_FOOTER_ARGS += --rollback_index $(BOARD_AVB_SYSTEM_OTHER_ROLLBACK_INDEX) |
| endif # end of AVB for BUILDING_SYSTEM_OTHER_IMAGE |
| |
| INTERNAL_AVB_PARTITIONS_IN_CHAINED_VBMETA_IMAGES := \ |
| $(BOARD_AVB_VBMETA_SYSTEM) \ |
| $(BOARD_AVB_VBMETA_VENDOR) |
| |
| # Not allowing the same partition to appear in multiple groups. |
| ifneq ($(words $(sort $(INTERNAL_AVB_PARTITIONS_IN_CHAINED_VBMETA_IMAGES))),$(words $(INTERNAL_AVB_PARTITIONS_IN_CHAINED_VBMETA_IMAGES))) |
| $(error BOARD_AVB_VBMETA_SYSTEM and BOARD_AVB_VBMETA_VENDOR cannot have duplicates) |
| endif |
| |
| # When building a standalone recovery image for non-A/B devices, recovery image must be self-signed |
| # to be verified independently, and cannot be chained into vbmeta.img. See the link below for |
| # details. |
| ifneq ($(AB_OTA_UPDATER),true) |
| ifneq ($(INSTALLED_RECOVERYIMAGE_TARGET),) |
| $(if $(BOARD_AVB_RECOVERY_KEY_PATH),,\ |
| $(error BOARD_AVB_RECOVERY_KEY_PATH must be defined for non-A/B devices. \ |
| See https://android.googlesource.com/platform/external/avb/+/master/README.md#booting-into-recovery)) |
| endif |
| endif |
| |
| # Appends os version and security patch level as a AVB property descriptor |
| |
| BOARD_AVB_SYSTEM_ADD_HASHTREE_FOOTER_ARGS += \ |
| --prop com.android.build.system.fingerprint:$(BUILD_FINGERPRINT_FROM_FILE) \ |
| --prop com.android.build.system.os_version:$(PLATFORM_VERSION) \ |
| --prop com.android.build.system.security_patch:$(PLATFORM_SECURITY_PATCH) |
| |
| BOARD_AVB_PRODUCT_ADD_HASHTREE_FOOTER_ARGS += \ |
| --prop com.android.build.product.fingerprint:$(BUILD_FINGERPRINT_FROM_FILE) \ |
| --prop com.android.build.product.os_version:$(PLATFORM_VERSION) \ |
| --prop com.android.build.product.security_patch:$(PLATFORM_SECURITY_PATCH) |
| |
| BOARD_AVB_SYSTEM_EXT_ADD_HASHTREE_FOOTER_ARGS += \ |
| --prop com.android.build.system_ext.fingerprint:$(BUILD_FINGERPRINT_FROM_FILE) \ |
| --prop com.android.build.system_ext.os_version:$(PLATFORM_VERSION) \ |
| --prop com.android.build.system_ext.security_patch:$(PLATFORM_SECURITY_PATCH) |
| |
| BOARD_AVB_BOOT_ADD_HASH_FOOTER_ARGS += \ |
| --prop com.android.build.boot.fingerprint:$(BUILD_FINGERPRINT_FROM_FILE) \ |
| --prop com.android.build.boot.os_version:$(PLATFORM_VERSION) |
| |
| BOARD_AVB_VENDOR_BOOT_ADD_HASH_FOOTER_ARGS += \ |
| --prop com.android.build.vendor_boot.fingerprint:$(BUILD_FINGERPRINT_FROM_FILE) \ |
| |
| BOARD_AVB_RECOVERY_ADD_HASH_FOOTER_ARGS += \ |
| --prop com.android.build.recovery.fingerprint:$(BUILD_FINGERPRINT_FROM_FILE) |
| |
| BOARD_AVB_VENDOR_ADD_HASHTREE_FOOTER_ARGS += \ |
| --prop com.android.build.vendor.fingerprint:$(BUILD_FINGERPRINT_FROM_FILE) \ |
| --prop com.android.build.vendor.os_version:$(PLATFORM_VERSION) |
| |
| BOARD_AVB_ODM_ADD_HASHTREE_FOOTER_ARGS += \ |
| --prop com.android.build.odm.fingerprint:$(BUILD_FINGERPRINT_FROM_FILE) \ |
| --prop com.android.build.odm.os_version:$(PLATFORM_VERSION) |
| |
| BOARD_AVB_DTBO_ADD_HASH_FOOTER_ARGS += \ |
| --prop com.android.build.dtbo.fingerprint:$(BUILD_FINGERPRINT_FROM_FILE) |
| |
| # The following vendor- and odm-specific images needs explicit SPL set per board. |
| ifdef BOOT_SECURITY_PATCH |
| BOARD_AVB_BOOT_ADD_HASH_FOOTER_ARGS += \ |
| --prop com.android.build.boot.security_patch:$(BOOT_SECURITY_PATCH) |
| endif |
| |
| ifdef VENDOR_SECURITY_PATCH |
| BOARD_AVB_VENDOR_ADD_HASHTREE_FOOTER_ARGS += \ |
| --prop com.android.build.vendor.security_patch:$(VENDOR_SECURITY_PATCH) |
| endif |
| |
| ifdef ODM_SECURITY_PATCH |
| BOARD_AVB_ODM_ADD_HASHTREE_FOOTER_ARGS += \ |
| --prop com.android.build.odm.security_patch:$(ODM_SECURITY_PATCH) |
| endif |
| |
| BOOT_FOOTER_ARGS := BOARD_AVB_BOOT_ADD_HASH_FOOTER_ARGS |
| VENDOR_BOOT_FOOTER_ARGS := BOARD_AVB_VENDOR_BOOT_ADD_HASH_FOOTER_ARGS |
| DTBO_FOOTER_ARGS := BOARD_AVB_DTBO_ADD_HASH_FOOTER_ARGS |
| SYSTEM_FOOTER_ARGS := BOARD_AVB_SYSTEM_ADD_HASHTREE_FOOTER_ARGS |
| VENDOR_FOOTER_ARGS := BOARD_AVB_VENDOR_ADD_HASHTREE_FOOTER_ARGS |
| RECOVERY_FOOTER_ARGS := BOARD_AVB_RECOVERY_ADD_HASH_FOOTER_ARGS |
| PRODUCT_FOOTER_ARGS := BOARD_AVB_PRODUCT_ADD_HASHTREE_FOOTER_ARGS |
| SYSTEM_EXT_FOOTER_ARGS := BOARD_AVB_SYSTEM_EXT_ADD_HASHTREE_FOOTER_ARGS |
| ODM_FOOTER_ARGS := BOARD_AVB_ODM_ADD_HASHTREE_FOOTER_ARGS |
| |
| # Helper function that checks and sets required build variables for an AVB chained partition. |
| # $(1): the partition to enable AVB chain, e.g., boot or system or vbmeta_system. |
| define _check-and-set-avb-chain-args |
| $(eval part := $(1)) |
| $(eval PART=$(call to-upper,$(part))) |
| |
| $(eval _key_path := BOARD_AVB_$(PART)_KEY_PATH) |
| $(eval _signing_algorithm := BOARD_AVB_$(PART)_ALGORITHM) |
| $(eval _rollback_index := BOARD_AVB_$(PART)_ROLLBACK_INDEX) |
| $(eval _rollback_index_location := BOARD_AVB_$(PART)_ROLLBACK_INDEX_LOCATION) |
| $(if $($(_key_path)),,$(error $(_key_path) is not defined)) |
| $(if $($(_signing_algorithm)),,$(error $(_signing_algorithm) is not defined)) |
| $(if $($(_rollback_index)),,$(error $(_rollback_index) is not defined)) |
| $(if $($(_rollback_index_location)),,$(error $(_rollback_index_location) is not defined)) |
| |
| # Set INTERNAL_AVB_(PART)_SIGNING_ARGS |
| $(eval _signing_args := INTERNAL_AVB_$(PART)_SIGNING_ARGS) |
| $(eval $(_signing_args) := \ |
| --algorithm $($(_signing_algorithm)) --key $($(_key_path))) |
| |
| # The recovery partition in non-A/B devices should be verified separately. Skip adding the chain |
| # partition descriptor for recovery partition into vbmeta.img. |
| $(if $(or $(filter true,$(AB_OTA_UPDATER)),$(filter-out recovery,$(part))),\ |
| $(eval INTERNAL_AVB_MAKE_VBMETA_IMAGE_ARGS += \ |
| --chain_partition $(part):$($(_rollback_index_location)):$(AVB_CHAIN_KEY_DIR)/$(part).avbpubkey)) |
| |
| # Set rollback_index via footer args for non-chained vbmeta image. Chained vbmeta image will pick up |
| # the index via a separate flag (e.g. BOARD_AVB_VBMETA_SYSTEM_ROLLBACK_INDEX). |
| $(if $(filter $(part),$(part:vbmeta_%=%)),\ |
| $(eval _footer_args := $(PART)_FOOTER_ARGS) \ |
| $(eval $($(_footer_args)) += --rollback_index $($(_rollback_index)))) |
| endef |
| |
| # Checks and sets the required build variables for an AVB partition. The partition will be |
| # configured as a chained partition, if BOARD_AVB_<partition>_KEY_PATH is defined. Otherwise the |
| # image descriptor will be included into vbmeta.img, unless it has been already added to any chained |
| # VBMeta image. |
| # $(1): Partition name, e.g. boot or system. |
| define check-and-set-avb-args |
| $(eval _in_chained_vbmeta := $(filter $(1),$(INTERNAL_AVB_PARTITIONS_IN_CHAINED_VBMETA_IMAGES))) |
| $(if $(BOARD_AVB_$(call to-upper,$(1))_KEY_PATH),\ |
| $(if $(_in_chained_vbmeta),\ |
| $(error Chaining partition "$(1)" in chained VBMeta image is not supported)) \ |
| $(call _check-and-set-avb-chain-args,$(1)),\ |
| $(if $(_in_chained_vbmeta),,\ |
| $(eval INTERNAL_AVB_MAKE_VBMETA_IMAGE_ARGS += \ |
| --include_descriptors_from_image $(call images-for-partitions,$(1))))) |
| endef |
| |
| ifdef INSTALLED_BOOTIMAGE_TARGET |
| $(eval $(call check-and-set-avb-args,boot)) |
| endif |
| |
| ifdef INSTALLED_VENDOR_BOOTIMAGE_TARGET |
| $(eval $(call check-and-set-avb-args,vendor_boot)) |
| endif |
| |
| $(eval $(call check-and-set-avb-args,system)) |
| |
| ifdef INSTALLED_VENDORIMAGE_TARGET |
| $(eval $(call check-and-set-avb-args,vendor)) |
| endif |
| |
| ifdef INSTALLED_PRODUCTIMAGE_TARGET |
| $(eval $(call check-and-set-avb-args,product)) |
| endif |
| |
| ifdef INSTALLED_SYSTEM_EXTIMAGE_TARGET |
| $(eval $(call check-and-set-avb-args,system_ext)) |
| endif |
| |
| ifdef INSTALLED_ODMIMAGE_TARGET |
| $(eval $(call check-and-set-avb-args,odm)) |
| endif |
| |
| ifdef INSTALLED_DTBOIMAGE_TARGET |
| $(eval $(call check-and-set-avb-args,dtbo)) |
| endif |
| |
| ifdef INSTALLED_RECOVERYIMAGE_TARGET |
| $(eval $(call check-and-set-avb-args,recovery)) |
| endif |
| |
| # Not using INSTALLED_VBMETA_SYSTEMIMAGE_TARGET as it won't be set yet. |
| ifdef BOARD_AVB_VBMETA_SYSTEM |
| $(eval $(call check-and-set-avb-args,vbmeta_system)) |
| endif |
| |
| ifdef BOARD_AVB_VBMETA_VENDOR |
| $(eval $(call check-and-set-avb-args,vbmeta_vendor)) |
| endif |
| |
| # Add kernel cmdline descriptor for kernel to mount system.img as root with |
| # dm-verity. This works when system.img is either chained or not-chained: |
| # - chained: The --setup_as_rootfs_from_kernel option will add dm-verity kernel |
| # cmdline descriptor to system.img |
| # - not-chained: The --include_descriptors_from_image option for make_vbmeta_image |
| # will include the kernel cmdline descriptor from system.img into vbmeta.img |
| ifeq ($(BOARD_BUILD_SYSTEM_ROOT_IMAGE),true) |
| ifeq ($(filter system, $(BOARD_SUPER_PARTITION_PARTITION_LIST)),) |
| BOARD_AVB_SYSTEM_ADD_HASHTREE_FOOTER_ARGS += --setup_as_rootfs_from_kernel |
| endif |
| endif |
| |
| BOARD_AVB_MAKE_VBMETA_IMAGE_ARGS += --padding_size 4096 |
| BOARD_AVB_MAKE_VBMETA_SYSTEM_IMAGE_ARGS += --padding_size 4096 |
| BOARD_AVB_MAKE_VBMETA_VENDOR_IMAGE_ARGS += --padding_size 4096 |
| |
| ifeq (eng,$(filter eng, $(TARGET_BUILD_VARIANT))) |
| # We only need the flag in top-level vbmeta.img. |
| BOARD_AVB_MAKE_VBMETA_IMAGE_ARGS += --set_hashtree_disabled_flag |
| endif |
| |
| ifdef BOARD_AVB_ROLLBACK_INDEX |
| BOARD_AVB_MAKE_VBMETA_IMAGE_ARGS += --rollback_index $(BOARD_AVB_ROLLBACK_INDEX) |
| endif |
| |
| ifdef BOARD_AVB_VBMETA_SYSTEM_ROLLBACK_INDEX |
| BOARD_AVB_MAKE_VBMETA_SYSTEM_IMAGE_ARGS += \ |
| --rollback_index $(BOARD_AVB_VBMETA_SYSTEM_ROLLBACK_INDEX) |
| endif |
| |
| ifdef BOARD_AVB_VBMETA_VENDOR_ROLLBACK_INDEX |
| BOARD_AVB_MAKE_VBMETA_VENDOR_IMAGE_ARGS += \ |
| --rollback_index $(BOARD_AVB_VBMETA_VENDOR_ROLLBACK_INDEX) |
| endif |
| |
| # $(1): the directory to extract public keys to |
| define extract-avb-chain-public-keys |
| $(if $(BOARD_AVB_BOOT_KEY_PATH),\ |
| $(hide) $(AVBTOOL) extract_public_key --key $(BOARD_AVB_BOOT_KEY_PATH) \ |
| --output $(1)/boot.avbpubkey) |
| $(if $(BOARD_AVB_VENDOR_BOOT_KEY_PATH),\ |
| $(AVBTOOL) extract_public_key --key $(BOARD_AVB_VENDOR_BOOT_KEY_PATH) \ |
| --output $(1)/vendor_boot.avbpubkey) |
| $(if $(BOARD_AVB_SYSTEM_KEY_PATH),\ |
| $(hide) $(AVBTOOL) extract_public_key --key $(BOARD_AVB_SYSTEM_KEY_PATH) \ |
| --output $(1)/system.avbpubkey) |
| $(if $(BOARD_AVB_VENDOR_KEY_PATH),\ |
| $(hide) $(AVBTOOL) extract_public_key --key $(BOARD_AVB_VENDOR_KEY_PATH) \ |
| --output $(1)/vendor.avbpubkey) |
| $(if $(BOARD_AVB_PRODUCT_KEY_PATH),\ |
| $(hide) $(AVBTOOL) extract_public_key --key $(BOARD_AVB_PRODUCT_KEY_PATH) \ |
| --output $(1)/product.avbpubkey) |
| $(if $(BOARD_AVB_SYSTEM_EXT_KEY_PATH),\ |
| $(hide) $(AVBTOOL) extract_public_key --key $(BOARD_AVB_SYSTEM_EXT_KEY_PATH) \ |
| --output $(1)/system_ext.avbpubkey) |
| $(if $(BOARD_AVB_ODM_KEY_PATH),\ |
| $(hide) $(AVBTOOL) extract_public_key --key $(BOARD_AVB_ODM_KEY_PATH) \ |
| --output $(1)/odm.avbpubkey) |
| $(if $(BOARD_AVB_DTBO_KEY_PATH),\ |
| $(hide) $(AVBTOOL) extract_public_key --key $(BOARD_AVB_DTBO_KEY_PATH) \ |
| --output $(1)/dtbo.avbpubkey) |
| $(if $(BOARD_AVB_RECOVERY_KEY_PATH),\ |
| $(hide) $(AVBTOOL) extract_public_key --key $(BOARD_AVB_RECOVERY_KEY_PATH) \ |
| --output $(1)/recovery.avbpubkey) |
| $(if $(BOARD_AVB_VBMETA_SYSTEM_KEY_PATH),\ |
| $(hide) $(AVBTOOL) extract_public_key --key $(BOARD_AVB_VBMETA_SYSTEM_KEY_PATH) \ |
| --output $(1)/vbmeta_system.avbpubkey) |
| $(if $(BOARD_AVB_VBMETA_VENDOR_KEY_PATH),\ |
| $(hide) $(AVBTOOL) extract_public_key --key $(BOARD_AVB_VBMETA_VENDOR_KEY_PATH) \ |
| --output $(1)/vbmeta_vendor.avbpubkey) |
| endef |
| |
| # Builds a chained VBMeta image. This VBMeta image will contain the descriptors for the partitions |
| # specified in BOARD_AVB_VBMETA_<NAME>. The built VBMeta image will be included into the top-level |
| # vbmeta image as a chained partition. For example, if a target defines `BOARD_AVB_VBMETA_SYSTEM |
| # := system system_ext`, `vbmeta_system.img` will be created that includes the descriptors for |
| # `system.img` and `system_ext.img`. `vbmeta_system.img` itself will be included into |
| # `vbmeta.img` as a chained partition. |
| # $(1): VBMeta image name, such as "vbmeta_system", "vbmeta_vendor" etc. |
| # $(2): Output filename. |
| define build-chained-vbmeta-image |
| $(call pretty,"Target chained vbmeta image: $@") |
| $(hide) $(AVBTOOL) make_vbmeta_image \ |
| $(INTERNAL_AVB_$(call to-upper,$(1))_SIGNING_ARGS) \ |
| $(BOARD_AVB_MAKE_$(call to-upper,$(1))_IMAGE_ARGS) \ |
| $(foreach image,$(BOARD_AVB_$(call to-upper,$(1))), \ |
| --include_descriptors_from_image $(call images-for-partitions,$(image))) \ |
| --output $@ |
| endef |
| |
| ifdef BUILDING_SYSTEM_IMAGE |
| ifdef BOARD_AVB_VBMETA_SYSTEM |
| INSTALLED_VBMETA_SYSTEMIMAGE_TARGET := $(PRODUCT_OUT)/vbmeta_system.img |
| $(INSTALLED_VBMETA_SYSTEMIMAGE_TARGET): \ |
| $(AVBTOOL) \ |
| $(call images-for-partitions,$(BOARD_AVB_VBMETA_SYSTEM)) \ |
| $(BOARD_AVB_VBMETA_SYSTEM_KEY_PATH) |
| $(call build-chained-vbmeta-image,vbmeta_system) |
| endif |
| endif # BUILDING_SYSTEM_IMAGE |
| |
| ifdef BOARD_AVB_VBMETA_VENDOR |
| INSTALLED_VBMETA_VENDORIMAGE_TARGET := $(PRODUCT_OUT)/vbmeta_vendor.img |
| $(INSTALLED_VBMETA_VENDORIMAGE_TARGET): \ |
| $(AVBTOOL) \ |
| $(call images-for-partitions,$(BOARD_AVB_VBMETA_VENDOR)) \ |
| $(BOARD_AVB_VBMETA_VENDOR_KEY_PATH) |
| $(call build-chained-vbmeta-image,vbmeta_vendor) |
| endif |
| |
| define build-vbmetaimage-target |
| $(call pretty,"Target vbmeta image: $(INSTALLED_VBMETAIMAGE_TARGET)") |
| $(hide) mkdir -p $(AVB_CHAIN_KEY_DIR) |
| $(call extract-avb-chain-public-keys, $(AVB_CHAIN_KEY_DIR)) |
| $(hide) $(AVBTOOL) make_vbmeta_image \ |
| $(INTERNAL_AVB_MAKE_VBMETA_IMAGE_ARGS) \ |
| $(PRIVATE_AVB_VBMETA_SIGNING_ARGS) \ |
| $(BOARD_AVB_MAKE_VBMETA_IMAGE_ARGS) \ |
| --output $@ |
| $(hide) rm -rf $(AVB_CHAIN_KEY_DIR) |
| endef |
| |
| ifdef BUILDING_VBMETA_IMAGE |
| INSTALLED_VBMETAIMAGE_TARGET := $(BUILT_VBMETAIMAGE_TARGET) |
| $(INSTALLED_VBMETAIMAGE_TARGET): PRIVATE_AVB_VBMETA_SIGNING_ARGS := \ |
| --algorithm $(BOARD_AVB_ALGORITHM) --key $(BOARD_AVB_KEY_PATH) |
| |
| $(INSTALLED_VBMETAIMAGE_TARGET): \ |
| $(AVBTOOL) \ |
| $(INSTALLED_BOOTIMAGE_TARGET) \ |
| $(INSTALLED_VENDOR_BOOTIMAGE_TARGET) \ |
| $(INSTALLED_SYSTEMIMAGE_TARGET) \ |
| $(INSTALLED_VENDORIMAGE_TARGET) \ |
| $(INSTALLED_PRODUCTIMAGE_TARGET) \ |
| $(INSTALLED_SYSTEM_EXTIMAGE_TARGET) \ |
| $(INSTALLED_ODMIMAGE_TARGET) \ |
| $(INSTALLED_DTBOIMAGE_TARGET) \ |
| $(INSTALLED_RECOVERYIMAGE_TARGET) \ |
| $(INSTALLED_VBMETA_SYSTEMIMAGE_TARGET) \ |
| $(INSTALLED_VBMETA_VENDORIMAGE_TARGET) \ |
| $(BOARD_AVB_VBMETA_SYSTEM_KEY_PATH) \ |
| $(BOARD_AVB_VBMETA_VENDOR_KEY_PATH) \ |
| $(BOARD_AVB_KEY_PATH) |
| $(build-vbmetaimage-target) |
| |
| .PHONY: vbmetaimage-nodeps |
| vbmetaimage-nodeps: PRIVATE_AVB_VBMETA_SIGNING_ARGS := \ |
| --algorithm $(BOARD_AVB_ALGORITHM) --key $(BOARD_AVB_KEY_PATH) |
| vbmetaimage-nodeps: |
| $(build-vbmetaimage-target) |
| endif # BUILDING_VBMETA_IMAGE |
| |
| endif # BOARD_AVB_ENABLE |
| |
| # ----------------------------------------------------------------- |
| # Check VINTF of build |
| |
| ifndef TARGET_BUILD_APPS |
| intermediates := $(call intermediates-dir-for,PACKAGING,check_vintf_all) |
| check_vintf_all_deps := |
| |
| # The build system only writes VINTF metadata to */etc/vintf paths. Legacy paths aren't needed here |
| # because they are only used for prebuilt images. |
| check_vintf_common_srcs_patterns := \ |
| $(TARGET_OUT)/etc/vintf/% \ |
| $(TARGET_OUT_VENDOR)/etc/vintf/% \ |
| $(TARGET_OUT_ODM)/etc/vintf/% \ |
| $(TARGET_OUT_PRODUCT)/etc/vintf/% \ |
| $(TARGET_OUT_SYSTEM_EXT)/etc/vintf/% \ |
| |
| check_vintf_common_srcs := $(sort $(filter $(check_vintf_common_srcs_patterns), \ |
| $(INTERNAL_SYSTEMIMAGE_FILES) \ |
| $(INTERNAL_VENDORIMAGE_FILES) \ |
| $(INTERNAL_ODMIMAGE_FILES) \ |
| $(INTERNAL_PRODUCTIMAGE_FILES) \ |
| $(INTERNAL_SYSTEM_EXTIMAGE_FILES) \ |
| )) |
| check_vintf_common_srcs_patterns := |
| |
| check_vintf_has_system := |
| check_vintf_has_vendor := |
| |
| ifneq (,$(filter EMPTY_ODM_SKU_PLACEHOLDER,$(ODM_MANIFEST_SKUS))) |
| $(error EMPTY_ODM_SKU_PLACEHOLDER is an internal variable and cannot be used for ODM_MANIFEST_SKUS) |
| endif |
| ifneq (,$(filter EMPTY_VENDOR_SKU_PLACEHOLDER,$(DEVICE_MANIFEST_SKUS))) |
| $(error EMPTY_VENDOR_SKU_PLACEHOLDER is an internal variable and cannot be used for DEIVCE_MANIFEST_SKUS) |
| endif |
| |
| # -- Check system manifest / matrix including fragments (excluding other framework manifests / matrices, e.g. product); |
| check_vintf_system_deps := $(filter $(TARGET_OUT)/etc/vintf/%, $(check_vintf_common_srcs)) |
| ifneq ($(check_vintf_system_deps),) |
| check_vintf_has_system := true |
| check_vintf_system_log := $(intermediates)/check_vintf_system_log |
| check_vintf_all_deps += $(check_vintf_system_log) |
| $(check_vintf_system_log): $(HOST_OUT_EXECUTABLES)/checkvintf $(check_vintf_system_deps) |
| @( $< --check-one --dirmap /system:$(TARGET_OUT) > $@ 2>&1 ) || ( cat $@ && exit 1 ) |
| check_vintf_system_log := |
| endif # check_vintf_system_deps |
| check_vintf_system_deps := |
| |
| # -- Check vendor manifest / matrix including fragments (excluding other device manifests / matrices) |
| check_vintf_vendor_deps := $(filter $(TARGET_OUT_VENDOR)/etc/vintf/%, $(check_vintf_common_srcs)) |
| ifneq ($(check_vintf_vendor_deps),) |
| check_vintf_has_vendor := true |
| check_vintf_vendor_log := $(intermediates)/check_vintf_vendor_log |
| check_vintf_all_deps += $(check_vintf_vendor_log) |
| # Check vendor SKU=(empty) case when: |
| # - DEVICE_MANIFEST_FILE is not empty; OR |
| # - DEVICE_MANIFEST_FILE is empty AND DEVICE_MANIFEST_SKUS is empty (only vendor manifest fragments are used) |
| $(check_vintf_vendor_log): PRIVATE_VENDOR_SKUS := \ |
| $(if $(DEVICE_MANIFEST_FILE),EMPTY_VENDOR_SKU_PLACEHOLDER,\ |
| $(if $(DEVICE_MANIFEST_SKUS),,EMPTY_VENDOR_SKU_PLACEHOLDER)) \ |
| $(DEVICE_MANIFEST_SKUS) |
| $(check_vintf_vendor_log): $(HOST_OUT_EXECUTABLES)/checkvintf $(check_vintf_vendor_deps) |
| $(foreach vendor_sku,$(PRIVATE_VENDOR_SKUS), \ |
| ( $< --check-one --dirmap /vendor:$(TARGET_OUT_VENDOR) \ |
| --property ro.boot.product.vendor.sku=$(filter-out EMPTY_VENDOR_SKU_PLACEHOLDER,$(vendor_sku)) \ |
| > $@ 2>&1 ) || ( cat $@ && exit 1 ); ) |
| check_vintf_vendor_log := |
| endif # check_vintf_vendor_deps |
| check_vintf_vendor_deps := |
| |
| # -- Check VINTF compatibility of build. |
| # Skip partial builds; only check full builds. Only check if: |
| # - PRODUCT_ENFORCE_VINTF_MANIFEST is true |
| # - system / vendor VINTF metadata exists |
| # - Building product / system_ext / odm images if board has product / system_ext / odm images |
| ifeq ($(PRODUCT_ENFORCE_VINTF_MANIFEST),true) |
| ifeq ($(check_vintf_has_system),true) |
| ifeq ($(check_vintf_has_vendor),true) |
| ifeq ($(filter true,$(BUILDING_ODM_IMAGE)),$(filter true,$(BOARD_USES_ODMIMAGE))) |
| ifeq ($(filter true,$(BUILDING_PRODUCT_IMAGE)),$(filter true,$(BOARD_USES_PRODUCTIMAGE))) |
| ifeq ($(filter true,$(BUILDING_SYSTEM_EXT_IMAGE)),$(filter true,$(BOARD_USES_SYSTEM_EXTIMAGE))) |
| |
| check_vintf_compatible_log := $(intermediates)/check_vintf_compatible_log |
| check_vintf_all_deps += $(check_vintf_compatible_log) |
| |
| check_vintf_compatible_args := |
| check_vintf_compatible_deps := $(check_vintf_common_srcs) |
| |
| # -- Kernel version and configurations. |
| ifeq ($(PRODUCT_OTA_ENFORCE_VINTF_KERNEL_REQUIREMENTS),true) |
| |
| BUILT_KERNEL_CONFIGS_FILE := $(intermediates)/kernel_configs.txt |
| BUILT_KERNEL_VERSION_FILE := $(intermediates)/kernel_version.txt |
| |
| my_board_extracted_kernel := |
| |
| # BOARD_KERNEL_CONFIG_FILE and BOARD_KERNEL_VERSION can be used to override the values extracted |
| # from INSTALLED_KERNEL_TARGET. |
| ifdef BOARD_KERNEL_CONFIG_FILE |
| ifdef BOARD_KERNEL_VERSION |
| $(BUILT_KERNEL_CONFIGS_FILE): $(BOARD_KERNEL_CONFIG_FILE) |
| cp $< $@ |
| $(BUILT_KERNEL_VERSION_FILE): |
| echo $(BOARD_KERNEL_VERSION) > $@ |
| |
| my_board_extracted_kernel := true |
| endif # BOARD_KERNEL_VERSION |
| endif # BOARD_KERNEL_CONFIG_FILE |
| |
| ifneq ($(my_board_extracted_kernel),true) |
| ifndef INSTALLED_KERNEL_TARGET |
| $(warning No INSTALLED_KERNEL_TARGET is defined when PRODUCT_OTA_ENFORCE_VINTF_KERNEL_REQUIREMENTS \ |
| is true. Information about the updated kernel cannot be built into OTA update package. \ |
| You can fix this by: (1) setting TARGET_NO_KERNEL to false and installing the built kernel \ |
| to $(PRODUCT_OUT)/kernel, so that kernel information will be extracted from the built kernel; \ |
| or (2) extracting kernel configuration and defining BOARD_KERNEL_CONFIG_FILE and \ |
| BOARD_KERNEL_VERSION manually; or (3) unsetting PRODUCT_OTA_ENFORCE_VINTF_KERNEL_REQUIREMENTS \ |
| manually.) |
| else |
| |
| # Tools for decompression that is not in PATH. |
| # Check $(EXTRACT_KERNEL) for decompression algorithms supported by the script. |
| # Algorithms that are in the script but not in this list will be found in PATH. |
| my_decompress_tools := \ |
| lz4:$(HOST_OUT_EXECUTABLES)/lz4 \ |
| |
| $(BUILT_KERNEL_CONFIGS_FILE): .KATI_IMPLICIT_OUTPUTS := $(BUILT_KERNEL_VERSION_FILE) |
| $(BUILT_KERNEL_CONFIGS_FILE): PRIVATE_DECOMPRESS_TOOLS := $(my_decompress_tools) |
| $(BUILT_KERNEL_CONFIGS_FILE): $(foreach pair,$(my_decompress_tools),$(call word-colon,2,$(pair))) |
| $(BUILT_KERNEL_CONFIGS_FILE): $(EXTRACT_KERNEL) $(INSTALLED_KERNEL_TARGET) |
| $< --tools $(PRIVATE_DECOMPRESS_TOOLS) --input $(INSTALLED_KERNEL_TARGET) \ |
| --output-configs $@ \ |
| --output-version $(BUILT_KERNEL_VERSION_FILE) |
| |
| my_decompress_tools := |
| |
| endif # my_board_extracted_kernel |
| my_board_extracted_kernel := |
| |
| endif # INSTALLED_KERNEL_TARGET |
| |
| check_vintf_compatible_args += --kernel $$(cat $(BUILT_KERNEL_VERSION_FILE)):$(BUILT_KERNEL_CONFIGS_FILE) |
| check_vintf_compatible_deps += $(BUILT_KERNEL_CONFIGS_FILE) $(BUILT_KERNEL_VERSION_FILE) |
| |
| endif # PRODUCT_OTA_ENFORCE_VINTF_KERNEL_REQUIREMENTS |
| |
| check_vintf_compatible_args += \ |
| --dirmap /system:$(TARGET_OUT) \ |
| --dirmap /vendor:$(TARGET_OUT_VENDOR) \ |
| --dirmap /odm:$(TARGET_OUT_ODM) \ |
| --dirmap /product:$(TARGET_OUT_PRODUCT) \ |
| --dirmap /system_ext:$(TARGET_OUT_SYSTEM_EXT) \ |
| |
| ifdef PRODUCT_SHIPPING_API_LEVEL |
| check_vintf_compatible_args += --property ro.product.first_api_level=$(PRODUCT_SHIPPING_API_LEVEL) |
| endif # PRODUCT_SHIPPING_API_LEVEL |
| |
| $(check_vintf_compatible_log): PRIVATE_CHECK_VINTF_ARGS := $(check_vintf_compatible_args) |
| $(check_vintf_compatible_log): PRIVATE_CHECK_VINTF_DEPS := $(check_vintf_compatible_deps) |
| # Check ODM SKU=(empty) case when: |
| # - ODM_MANIFEST_FILES is not empty; OR |
| # - ODM_MANIFEST_FILES is empty AND ODM_MANIFEST_SKUS is empty (only ODM manifest fragments are used) |
| $(check_vintf_compatible_log): PRIVATE_ODM_SKUS := \ |
| $(if $(ODM_MANIFEST_FILES),EMPTY_ODM_SKU_PLACEHOLDER,\ |
| $(if $(ODM_MANIFEST_SKUS),,EMPTY_ODM_SKU_PLACEHOLDER)) \ |
| $(ODM_MANIFEST_SKUS) |
| # Check vendor SKU=(empty) case when: |
| # - DEVICE_MANIFEST_FILE is not empty; OR |
| # - DEVICE_MANIFEST_FILE is empty AND DEVICE_MANIFEST_SKUS is empty (only vendor manifest fragments are used) |
| $(check_vintf_compatible_log): PRIVATE_VENDOR_SKUS := \ |
| $(if $(DEVICE_MANIFEST_FILE),EMPTY_VENDOR_SKU_PLACEHOLDER,\ |
| $(if $(DEVICE_MANIFEST_SKUS),,EMPTY_VENDOR_SKU_PLACEHOLDER)) \ |
| $(DEVICE_MANIFEST_SKUS) |
| $(check_vintf_compatible_log): $(HOST_OUT_EXECUTABLES)/checkvintf $(check_vintf_compatible_deps) |
| @echo -n -e 'Deps: \n ' > $@ |
| @sed 's/ /\n /g' <<< "$(PRIVATE_CHECK_VINTF_DEPS)" >> $@ |
| @echo -n -e 'Args: \n ' >> $@ |
| @cat <<< "$(PRIVATE_CHECK_VINTF_ARGS)" >> $@ |
| $(foreach odm_sku,$(PRIVATE_ODM_SKUS), $(foreach vendor_sku,$(PRIVATE_VENDOR_SKUS), \ |
| echo "For ODM SKU = $(odm_sku), vendor SKU = $(vendor_sku)" >> $@; \ |
| ( $< --check-compat $(PRIVATE_CHECK_VINTF_ARGS) \ |
| --property ro.boot.product.hardware.sku=$(filter-out EMPTY_ODM_SKU_PLACEHOLDER,$(odm_sku)) \ |
| --property ro.boot.product.vendor.sku=$(filter-out EMPTY_VENDOR_SKU_PLACEHOLDER,$(vendor_sku)) \ |
| >> $@ 2>&1 ) || (cat $@ && exit 1); )) |
| |
| check_vintf_compatible_log := |
| check_vintf_compatible_args := |
| check_vintf_compatible_deps := |
| |
| endif # BUILDING_SYSTEM_EXT_IMAGE equals BOARD_USES_SYSTEM_EXTIMAGE |
| endif # BUILDING_PRODUCT_IMAGE equals BOARD_USES_PRODUCTIMAGE |
| endif # BUILDING_ODM_IMAGE equals BOARD_USES_ODMIMAGE |
| endif # check_vintf_has_vendor |
| endif # check_vintf_has_system |
| endif # PRODUCT_ENFORCE_VINTF_MANIFEST |
| |
| # Add all logs of VINTF checks to dist builds |
| droid_targets: $(check_vintf_all_deps) |
| $(call dist-for-goals, droid_targets, $(check_vintf_all_deps)) |
| |
| # Helper alias to check all VINTF of current build. |
| .PHONY: check-vintf-all |
| check-vintf-all: $(check_vintf_all_deps) |
| $(foreach file,$^,echo "$(file)"; cat "$(file)"; echo;) |
| |
| check_vintf_has_vendor := |
| check_vintf_has_system := |
| check_vintf_common_srcs := |
| check_vintf_all_deps := |
| intermediates := |
| endif # !TARGET_BUILD_APPS |
| |
| # ----------------------------------------------------------------- |
| # Check image sizes <= size of super partition |
| |
| ifeq (,$(TARGET_BUILD_APPS)) |
| # Do not check for apps-only build |
| |
| ifeq (true,$(PRODUCT_BUILD_SUPER_PARTITION)) |
| |
| # $(1): misc_info.txt |
| # #(2): optional log file |
| define check-all-partition-sizes-target |
| mkdir -p $(dir $(1)) |
| rm -f $(1) |
| $(call dump-super-image-info, $(1)) |
| $(foreach partition,$(BOARD_SUPER_PARTITION_PARTITION_LIST), \ |
| echo "$(partition)_image="$(call images-for-partitions,$(partition)) >> $(1);) |
| $(CHECK_PARTITION_SIZES) $(if $(2),--logfile $(2),-v) $(1) |
| endef |
| |
| check_all_partition_sizes_log := $(call intermediates-dir-for,PACKAGING,check-all-partition-sizes)/check_all_partition_sizes_log |
| droid_targets: $(check_all_partition_sizes_log) |
| $(call dist-for-goals, droid_targets, $(check_all_partition_sizes_log)) |
| |
| $(check_all_partition_sizes_log): \ |
| $(CHECK_PARTITION_SIZES) \ |
| $(call images-for-partitions,$(BOARD_SUPER_PARTITION_PARTITION_LIST)) |
| $(call check-all-partition-sizes-target, \ |
| $(call intermediates-dir-for,PACKAGING,check-all-partition-sizes)/misc_info.txt, \ |
| $@) |
| |
| .PHONY: check-all-partition-sizes |
| check-all-partition-sizes: $(check_all_partition_sizes_log) |
| |
| .PHONY: check-all-partition-sizes-nodeps |
| check-all-partition-sizes-nodeps: |
| $(call check-all-partition-sizes-target, \ |
| $(call intermediates-dir-for,PACKAGING,check-all-partition-sizes-nodeps)/misc_info.txt) |
| |
| endif # PRODUCT_BUILD_SUPER_PARTITION |
| |
| endif # TARGET_BUILD_APPS |
| |
| # ----------------------------------------------------------------- |
| # bring in the installer image generation defines if necessary |
| ifeq ($(TARGET_USE_DISKINSTALLER),true) |
| include bootable/diskinstaller/config.mk |
| endif |
| |
| # ----------------------------------------------------------------- |
| # host tools needed to build dist and OTA packages |
| |
| ifeq ($(BUILD_OS),darwin) |
| build_ota_package := false |
| build_otatools_package := false |
| else |
| # Set build_ota_package, and allow opt-out below. |
| build_ota_package := true |
| ifeq ($(TARGET_SKIP_OTA_PACKAGE),true) |
| build_ota_package := false |
| endif |
| ifneq (,$(filter address, $(SANITIZE_TARGET))) |
| build_ota_package := false |
| endif |
| ifeq ($(TARGET_PRODUCT),sdk) |
| build_ota_package := false |
| endif |
| ifeq ($(TARGET_BUILD_PDK),true) |
| build_ota_package := false |
| endif |
| ifneq ($(PRODUCT_BUILD_GENERIC_OTA_PACKAGE),true) |
| ifneq ($(filter generic%,$(TARGET_DEVICE)),) |
| build_ota_package := false |
| endif |
| ifeq ($(TARGET_NO_KERNEL),true) |
| build_ota_package := false |
| endif |
| ifeq ($(recovery_fstab),) |
| build_ota_package := false |
| endif |
| endif # PRODUCT_BUILD_GENERIC_OTA_PACKAGE |
| |
| # Set build_otatools_package, and allow opt-out below. |
| build_otatools_package := true |
| ifeq ($(TARGET_SKIP_OTATOOLS_PACKAGE),true) |
| build_otatools_package := false |
| endif |
| endif |
| |
| ifeq ($(build_otatools_package),true) |
| |
| INTERNAL_OTATOOLS_MODULES := \ |
| aapt2 \ |
| add_img_to_target_files \ |
| aftltool \ |
| append2simg \ |
| avbtool \ |
| blk_alloc_to_base_fs \ |
| boot_signer \ |
| brillo_update_payload \ |
| brotli \ |
| bsdiff \ |
| build_image \ |
| build_super_image \ |
| build_verity_metadata \ |
| build_verity_tree \ |
| care_map_generator \ |
| check_ota_package_signature \ |
| check_target_files_signatures \ |
| check_target_files_vintf \ |
| checkvintf \ |
| delta_generator \ |
| e2fsck \ |
| e2fsdroid \ |
| fc_sort \ |
| fec \ |
| fs_config \ |
| generate_verity_key \ |
| img2simg \ |
| img_from_target_files \ |
| imgdiff \ |
| libconscrypt_openjdk_jni \ |
| lpmake \ |
| lpunpack \ |
| make_f2fs \ |
| merge_target_files \ |
| minigzip \ |
| mk_combined_img \ |
| mkbootfs \ |
| mkbootimg \ |
| mke2fs \ |
| mke2fs.conf \ |
| mkf2fsuserimg.sh \ |
| mksquashfs \ |
| mksquashfsimage.sh \ |
| mkuserimg_mke2fs \ |
| ota_from_target_files \ |
| sefcontext_compile \ |
| sgdisk \ |
| shflags \ |
| sign_apex \ |
| sign_target_files_apks \ |
| signapk \ |
| simg2img \ |
| sload_f2fs \ |
| tune2fs \ |
| unpack_bootimg \ |
| update_host_simulator \ |
| validate_target_files \ |
| verity_signer \ |
| verity_verifier \ |
| zipalign \ |
| |
| # Additional tools to unpack and repack the apex file. |
| INTERNAL_OTATOOLS_MODULES += \ |
| apexer \ |
| deapexer \ |
| debugfs_static \ |
| merge_zips \ |
| resize2fs \ |
| soong_zip \ |
| |
| ifeq (true,$(PRODUCT_SUPPORTS_VBOOT)) |
| INTERNAL_OTATOOLS_MODULES += \ |
| futility \ |
| vboot_signer |
| endif |
| |
| INTERNAL_OTATOOLS_FILES := \ |
| $(filter $(HOST_OUT)/%,$(call module-installed-files,$(INTERNAL_OTATOOLS_MODULES))) |
| |
| .PHONY: otatools |
| otatools: $(INTERNAL_OTATOOLS_FILES) |
| |
| # For each module, recursively resolve its host shared library dependencies. Then we have a full |
| # list of modules whose installed files need to be packed. |
| INTERNAL_OTATOOLS_MODULES_WITH_DEPS := \ |
| $(sort $(INTERNAL_OTATOOLS_MODULES) \ |
| $(foreach m,$(INTERNAL_OTATOOLS_MODULES),$(call get-all-shared-libs-deps,$(m)))) |
| |
| INTERNAL_OTATOOLS_PACKAGE_FILES := \ |
| $(filter $(HOST_OUT)/%,$(call module-installed-files,$(INTERNAL_OTATOOLS_MODULES_WITH_DEPS))) |
| |
| INTERNAL_OTATOOLS_PACKAGE_FILES += \ |
| $(sort $(shell find build/make/target/product/security -type f -name "*.x509.pem" -o \ |
| -name "*.pk8" -o -name verity_key)) |
| |
| ifneq (,$(wildcard device)) |
| INTERNAL_OTATOOLS_PACKAGE_FILES += \ |
| $(sort $(shell find device $(wildcard vendor) -type f -name "*.pk8" -o -name "verifiedboot*" -o \ |
| -name "*.pem" -o -name "oem*.prop" -o -name "*.avbpubkey")) |
| endif |
| ifneq (,$(wildcard external/avb)) |
| INTERNAL_OTATOOLS_PACKAGE_FILES += \ |
| $(sort $(shell find external/avb/test/data -type f -name "testkey_*.pem" -o \ |
| -name "atx_metadata.bin")) |
| endif |
| ifeq (true,$(PRODUCT_SUPPORTS_VBOOT)) |
| INTERNAL_OTATOOLS_PACKAGE_FILES += \ |
| $(sort $(shell find external/vboot_reference/tests/devkeys -type f)) |
| endif |
| |
| INTERNAL_OTATOOLS_RELEASETOOLS := \ |
| $(sort $(shell find build/make/tools/releasetools -name "*.pyc" -prune -o \ |
| \( -type f -o -type l \) -print)) |
| |
| BUILT_OTATOOLS_PACKAGE := $(PRODUCT_OUT)/otatools.zip |
| $(BUILT_OTATOOLS_PACKAGE): PRIVATE_ZIP_ROOT := $(call intermediates-dir-for,PACKAGING,otatools)/otatools |
| $(BUILT_OTATOOLS_PACKAGE): PRIVATE_OTATOOLS_PACKAGE_FILES := $(INTERNAL_OTATOOLS_PACKAGE_FILES) |
| $(BUILT_OTATOOLS_PACKAGE): PRIVATE_OTATOOLS_RELEASETOOLS := $(INTERNAL_OTATOOLS_RELEASETOOLS) |
| $(BUILT_OTATOOLS_PACKAGE): $(INTERNAL_OTATOOLS_PACKAGE_FILES) $(INTERNAL_OTATOOLS_RELEASETOOLS) |
| $(BUILT_OTATOOLS_PACKAGE): $(SOONG_ZIP) $(ZIP2ZIP) |
| @echo "Package OTA tools: $@" |
| rm -rf $@ $(PRIVATE_ZIP_ROOT) |
| mkdir -p $(dir $@) |
| $(call copy-files-with-structure,$(PRIVATE_OTATOOLS_PACKAGE_FILES),$(HOST_OUT)/,$(PRIVATE_ZIP_ROOT)) |
| $(call copy-files-with-structure,$(PRIVATE_OTATOOLS_RELEASETOOLS),build/make/tools/,$(PRIVATE_ZIP_ROOT)) |
| cp $(SOONG_ZIP) $(ZIP2ZIP) $(MERGE_ZIPS) $(PRIVATE_ZIP_ROOT)/bin/ |
| $(SOONG_ZIP) -o $@ -C $(PRIVATE_ZIP_ROOT) -D $(PRIVATE_ZIP_ROOT) |
| |
| .PHONY: otatools-package |
| otatools-package: $(BUILT_OTATOOLS_PACKAGE) |
| |
| endif # build_otatools_package |
| |
| # ----------------------------------------------------------------- |
| # misc_info.txt |
| |
| INSTALLED_MISC_INFO_TARGET := $(PRODUCT_OUT)/misc_info.txt |
| |
| ifeq ($(TARGET_RELEASETOOLS_EXTENSIONS),) |
| # default to common dir for device vendor |
| tool_extensions := $(TARGET_DEVICE_DIR)/../common |
| else |
| tool_extensions := $(TARGET_RELEASETOOLS_EXTENSIONS) |
| endif |
| .KATI_READONLY := tool_extensions |
| |
| $(INSTALLED_MISC_INFO_TARGET): |
| rm -f $@ |
| $(call pretty,"Target misc_info.txt: $@") |
| $(hide) echo "recovery_api_version=$(RECOVERY_API_VERSION)" >> $@ |
| $(hide) echo "fstab_version=$(RECOVERY_FSTAB_VERSION)" >> $@ |
| ifdef BOARD_FLASH_BLOCK_SIZE |
| $(hide) echo "blocksize=$(BOARD_FLASH_BLOCK_SIZE)" >> $@ |
| endif |
| ifdef BOARD_BOOTIMAGE_PARTITION_SIZE |
| $(hide) echo "boot_size=$(BOARD_BOOTIMAGE_PARTITION_SIZE)" >> $@ |
| endif |
| ifeq ($(INSTALLED_BOOTIMAGE_TARGET),) |
| $(hide) echo "no_boot=true" >> $@ |
| endif |
| ifneq ($(INSTALLED_VENDOR_BOOTIMAGE_TARGET),) |
| echo "vendor_boot=true" >> $@ |
| echo "vendor_boot_size=$(BOARD_VENDOR_BOOTIMAGE_PARTITION_SIZE)" >> $@ |
| endif |
| ifeq ($(INSTALLED_RECOVERYIMAGE_TARGET),) |
| $(hide) echo "no_recovery=true" >> $@ |
| endif |
| ifdef BOARD_INCLUDE_RECOVERY_DTBO |
| $(hide) echo "include_recovery_dtbo=true" >> $@ |
| endif |
| ifdef BOARD_INCLUDE_RECOVERY_ACPIO |
| $(hide) echo "include_recovery_acpio=true" >> $@ |
| endif |
| ifdef BOARD_RECOVERYIMAGE_PARTITION_SIZE |
| $(hide) echo "recovery_size=$(BOARD_RECOVERYIMAGE_PARTITION_SIZE)" >> $@ |
| endif |
| ifdef TARGET_RECOVERY_FSTYPE_MOUNT_OPTIONS |
| @# TARGET_RECOVERY_FSTYPE_MOUNT_OPTIONS can be empty to indicate that nothing but defaults should be used. |
| $(hide) echo "recovery_mount_options=$(TARGET_RECOVERY_FSTYPE_MOUNT_OPTIONS)" >> $@ |
| else |
| $(hide) echo "recovery_mount_options=$(DEFAULT_TARGET_RECOVERY_FSTYPE_MOUNT_OPTIONS)" >> $@ |
| endif |
| $(hide) echo "tool_extensions=$(tool_extensions)" >> $@ |
| $(hide) echo "default_system_dev_certificate=$(DEFAULT_SYSTEM_DEV_CERTIFICATE)" >> $@ |
| ifdef PRODUCT_EXTRA_RECOVERY_KEYS |
| $(hide) echo "extra_recovery_keys=$(PRODUCT_EXTRA_RECOVERY_KEYS)" >> $@ |
| endif |
| $(hide) echo 'mkbootimg_args=$(BOARD_MKBOOTIMG_ARGS)' >> $@ |
| $(hide) echo 'mkbootimg_version_args=$(INTERNAL_MKBOOTIMG_VERSION_ARGS)' >> $@ |
| $(hide) echo "multistage_support=1" >> $@ |
| $(hide) echo "blockimgdiff_versions=3,4" >> $@ |
| ifeq ($(PRODUCT_BUILD_GENERIC_OTA_PACKAGE),true) |
| $(hide) echo "build_generic_ota_package=true" >> $@ |
| endif |
| ifneq ($(OEM_THUMBPRINT_PROPERTIES),) |
| # OTA scripts are only interested in fingerprint related properties |
| $(hide) echo "oem_fingerprint_properties=$(OEM_THUMBPRINT_PROPERTIES)" >> $@ |
| endif |
| ifneq (,$(filter address, $(SANITIZE_TARGET))) |
| # We need to create userdata.img with real data because the instrumented libraries are in userdata.img. |
| $(hide) echo "userdata_img_with_data=true" >> $@ |
| endif |
| ifeq ($(BOARD_USES_FULL_RECOVERY_IMAGE),true) |
| $(hide) echo "full_recovery_image=true" >> $@ |
| endif |
| ifdef BOARD_USES_VENDORIMAGE |
| $(hide) echo "board_uses_vendorimage=true" >> $@ |
| endif |
| ifeq ($(BOARD_AVB_ENABLE),true) |
| $(hide) echo "avb_enable=true" >> $@ |
| $(hide) echo "avb_vbmeta_key_path=$(BOARD_AVB_KEY_PATH)" >> $@ |
| $(hide) echo "avb_vbmeta_algorithm=$(BOARD_AVB_ALGORITHM)" >> $@ |
| $(hide) echo "avb_vbmeta_args=$(BOARD_AVB_MAKE_VBMETA_IMAGE_ARGS)" >> $@ |
| $(hide) echo "avb_boot_add_hash_footer_args=$(BOARD_AVB_BOOT_ADD_HASH_FOOTER_ARGS)" >> $@ |
| ifdef BOARD_AVB_BOOT_KEY_PATH |
| $(hide) echo "avb_boot_key_path=$(BOARD_AVB_BOOT_KEY_PATH)" >> $@ |
| $(hide) echo "avb_boot_algorithm=$(BOARD_AVB_BOOT_ALGORITHM)" >> $@ |
| $(hide) echo "avb_boot_rollback_index_location=$(BOARD_AVB_BOOT_ROLLBACK_INDEX_LOCATION)" >> $@ |
| endif # BOARD_AVB_BOOT_KEY_PATH |
| echo "avb_vendor_boot_add_hash_footer_args=$(BOARD_AVB_VENDOR_BOOT_ADD_HASH_FOOTER_ARGS)" >> $@ |
| ifdef BOARD_AVB_VENDOR_BOOT_KEY_PATH |
| echo "avb_vendor_boot_key_path=$(BOARD_AVB_VENDOR_BOOT_KEY_PATH)" >> $@ |
| echo "avb_vendor_boot_algorithm=$(BOARD_AVB_VENDOR_BOOT_ALGORITHM)" >> $@ |
| echo "avb_vendor_boot_rollback_index_location=$(BOARD_AVB_VENDOR_BOOT_ROLLBACK_INDEX_LOCATION)" >> $@ |
| endif # BOARD_AVB_VENDOR_BOOT_KEY_PATH |
| $(hide) echo "avb_recovery_add_hash_footer_args=$(BOARD_AVB_RECOVERY_ADD_HASH_FOOTER_ARGS)" >> $@ |
| ifdef BOARD_AVB_RECOVERY_KEY_PATH |
| $(hide) echo "avb_recovery_key_path=$(BOARD_AVB_RECOVERY_KEY_PATH)" >> $@ |
| $(hide) echo "avb_recovery_algorithm=$(BOARD_AVB_RECOVERY_ALGORITHM)" >> $@ |
| $(hide) echo "avb_recovery_rollback_index_location=$(BOARD_AVB_RECOVERY_ROLLBACK_INDEX_LOCATION)" >> $@ |
| endif # BOARD_AVB_RECOVERY_KEY_PATH |
| ifneq (,$(strip $(BOARD_AVB_VBMETA_SYSTEM))) |
| $(hide) echo "avb_vbmeta_system=$(BOARD_AVB_VBMETA_SYSTEM)" >> $@ |
| $(hide) echo "avb_vbmeta_system_args=$(BOARD_AVB_MAKE_VBMETA_SYSTEM_IMAGE_ARGS)" >> $@ |
| $(hide) echo "avb_vbmeta_system_key_path=$(BOARD_AVB_VBMETA_SYSTEM_KEY_PATH)" >> $@ |
| $(hide) echo "avb_vbmeta_system_algorithm=$(BOARD_AVB_VBMETA_SYSTEM_ALGORITHM)" >> $@ |
| $(hide) echo "avb_vbmeta_system_rollback_index_location=$(BOARD_AVB_VBMETA_SYSTEM_ROLLBACK_INDEX_LOCATION)" >> $@ |
| endif # BOARD_AVB_VBMETA_SYSTEM |
| ifneq (,$(strip $(BOARD_AVB_VBMETA_VENDOR))) |
| $(hide) echo "avb_vbmeta_vendor=$(BOARD_AVB_VBMETA_VENDOR)" >> $@ |
| $(hide) echo "avb_vbmeta_vendor_args=$(BOARD_AVB_MAKE_VBMETA_SYSTEM_IMAGE_ARGS)" >> $@ |
| $(hide) echo "avb_vbmeta_vendor_key_path=$(BOARD_AVB_VBMETA_VENDOR_KEY_PATH)" >> $@ |
| $(hide) echo "avb_vbmeta_vendor_algorithm=$(BOARD_AVB_VBMETA_VENDOR_ALGORITHM)" >> $@ |
| $(hide) echo "avb_vbmeta_vendor_rollback_index_location=$(BOARD_AVB_VBMETA_VENDOR_ROLLBACK_INDEX_LOCATION)" >> $@ |
| endif # BOARD_AVB_VBMETA_VENDOR_KEY_PATH |
| endif # BOARD_AVB_ENABLE |
| ifdef BOARD_BPT_INPUT_FILES |
| $(hide) echo "board_bpt_enable=true" >> $@ |
| $(hide) echo "board_bpt_make_table_args=$(BOARD_BPT_MAKE_TABLE_ARGS)" >> $@ |
| $(hide) echo "board_bpt_input_files=$(BOARD_BPT_INPUT_FILES)" >> $@ |
| endif |
| ifdef BOARD_BPT_DISK_SIZE |
| $(hide) echo "board_bpt_disk_size=$(BOARD_BPT_DISK_SIZE)" >> $@ |
| endif |
| $(call generate-userimage-prop-dictionary, $@) |
| ifeq ($(AB_OTA_UPDATER),true) |
| @# Include the build type in META/misc_info.txt so the server can easily differentiate production builds. |
| $(hide) echo "build_type=$(TARGET_BUILD_VARIANT)" >> $@ |
| $(hide) echo "ab_update=true" >> $@ |
| endif |
| ifdef BOARD_PREBUILT_DTBOIMAGE |
| $(hide) echo "has_dtbo=true" >> $@ |
| ifeq ($(BOARD_AVB_ENABLE),true) |
| $(hide) echo "dtbo_size=$(BOARD_DTBOIMG_PARTITION_SIZE)" >> $@ |
| $(hide) echo "avb_dtbo_add_hash_footer_args=$(BOARD_AVB_DTBO_ADD_HASH_FOOTER_ARGS)" >> $@ |
| ifdef BOARD_AVB_DTBO_KEY_PATH |
| $(hide) echo "avb_dtbo_key_path=$(BOARD_AVB_DTBO_KEY_PATH)" >> $@ |
| $(hide) echo "avb_dtbo_algorithm=$(BOARD_AVB_DTBO_ALGORITHM)" >> $@ |
| $(hide) echo "avb_dtbo_rollback_index_location=$(BOARD_AVB_DTBO_ROLLBACK_INDEX_LOCATION)" >> $@ |
| endif # BOARD_AVB_DTBO_KEY_PATH |
| endif # BOARD_AVB_ENABLE |
| endif # BOARD_PREBUILT_DTBOIMAGE |
| $(call dump-dynamic-partitions-info,$@) |
| @# VINTF checks |
| ifeq ($(PRODUCT_ENFORCE_VINTF_MANIFEST),true) |
| $(hide) echo "vintf_enforce=true" >> $@ |
| endif |
| ifdef ODM_MANIFEST_SKUS |
| $(hide) echo "vintf_odm_manifest_skus=$(ODM_MANIFEST_SKUS)" >> $@ |
| endif |
| ifdef ODM_MANIFEST_FILES |
| $(hide) echo "vintf_include_empty_odm_sku=true" >> $@ |
| endif |
| ifdef DEVICE_MANIFEST_SKUS |
| $(hide) echo "vintf_vendor_manifest_skus=$(DEVICE_MANIFEST_SKUS)" >> $@ |
| endif |
| ifdef DEVICE_MANIFEST_FILE |
| $(hide) echo "vintf_include_empty_vendor_sku=true" >> $@ |
| endif |
| |
| .PHONY: misc_info |
| misc_info: $(INSTALLED_MISC_INFO_TARGET) |
| |
| droidcore: $(INSTALLED_MISC_INFO_TARGET) |
| |
| # ----------------------------------------------------------------- |
| # A zip of the directories that map to the target filesystem. |
| # This zip can be used to create an OTA package or filesystem image |
| # as a post-build step. |
| # |
| name := $(TARGET_PRODUCT) |
| ifeq ($(TARGET_BUILD_TYPE),debug) |
| name := $(name)_debug |
| endif |
| name := $(name)-target_files-$(FILE_NAME_TAG) |
| |
| intermediates := $(call intermediates-dir-for,PACKAGING,target_files) |
| BUILT_TARGET_FILES_PACKAGE := $(intermediates)/$(name).zip |
| $(BUILT_TARGET_FILES_PACKAGE): intermediates := $(intermediates) |
| $(BUILT_TARGET_FILES_PACKAGE): \ |
| zip_root := $(intermediates)/$(name) |
| |
| # $(1): Directory to copy |
| # $(2): Location to copy it to |
| # The "ls -A" is to prevent "acp s/* d" from failing if s is empty. |
| define package_files-copy-root |
| if [ -d "$(strip $(1))" -a "$$(ls -A $(1))" ]; then \ |
| mkdir -p $(2) && \ |
| $(ACP) -rd $(strip $(1))/* $(2); \ |
| fi |
| endef |
| |
| built_ota_tools := |
| |
| # We can't build static executables when SANITIZE_TARGET=address |
| ifeq (,$(filter address, $(SANITIZE_TARGET))) |
| built_ota_tools += \ |
| $(call intermediates-dir-for,EXECUTABLES,updater,,,$(TARGET_PREFER_32_BIT))/updater |
| endif |
| |
| $(BUILT_TARGET_FILES_PACKAGE): PRIVATE_OTA_TOOLS := $(built_ota_tools) |
| |
| tool_extension := $(wildcard $(tool_extensions)/releasetools.py) |
| $(BUILT_TARGET_FILES_PACKAGE): PRIVATE_TOOL_EXTENSION := $(tool_extension) |
| |
| ifeq ($(AB_OTA_UPDATER),true) |
| updater_dep := system/update_engine/update_engine.conf |
| else |
| # Build OTA tools if not using the AB Updater. |
| updater_dep := $(built_ota_tools) |
| endif |
| $(BUILT_TARGET_FILES_PACKAGE): $(updater_dep) |
| |
| # If we are using recovery as boot, output recovery files to BOOT/. |
| ifeq ($(BOARD_USES_RECOVERY_AS_BOOT),true) |
| $(BUILT_TARGET_FILES_PACKAGE): PRIVATE_RECOVERY_OUT := BOOT |
| else |
| $(BUILT_TARGET_FILES_PACKAGE): PRIVATE_RECOVERY_OUT := RECOVERY |
| endif |
| |
| ifeq ($(AB_OTA_UPDATER),true) |
| ifdef OSRELEASED_DIRECTORY |
| $(BUILT_TARGET_FILES_PACKAGE): $(TARGET_OUT_OEM)/$(OSRELEASED_DIRECTORY)/product_id |
| $(BUILT_TARGET_FILES_PACKAGE): $(TARGET_OUT_OEM)/$(OSRELEASED_DIRECTORY)/product_version |
| $(BUILT_TARGET_FILES_PACKAGE): $(TARGET_OUT_ETC)/$(OSRELEASED_DIRECTORY)/system_version |
| endif |
| |
| # Not checking in board_config.mk, since AB_OTA_PARTITIONS may be updated in Android.mk (e.g. to |
| # additionally include radio or bootloader partitions). |
| ifeq ($(AB_OTA_PARTITIONS),) |
| $(error AB_OTA_PARTITIONS must be defined when using AB_OTA_UPDATER) |
| endif |
| endif |
| |
| ifneq ($(AB_OTA_PARTITIONS),) |
| ifneq ($(AB_OTA_UPDATER),true) |
| $(error AB_OTA_UPDATER must be true when defining AB_OTA_PARTITIONS) |
| endif |
| endif |
| |
| # Run fs_config while creating the target files package |
| # $1: root directory |
| # $2: add prefix |
| define fs_config |
| (cd $(1); find . -type d | sed 's,$$,/,'; find . \! -type d) | cut -c 3- | sort | sed 's,^,$(2),' | $(HOST_OUT_EXECUTABLES)/fs_config -C -D $(TARGET_OUT) -S $(SELINUX_FC) -R "$(2)" |
| endef |
| |
| # Filter out vendor from the list for AOSP targets. |
| # $(1): list |
| define filter-out-missing-vendor |
| $(if $(INSTALLED_VENDORIMAGE_TARGET),$(1),$(filter-out vendor,$(1))) |
| endef |
| |
| # Information related to dynamic partitions and virtual A/B. This information |
| # is needed for building the super image (see dump-super-image-info) and |
| # building OTA packages. |
| # $(1): file |
| define dump-dynamic-partitions-info |
| $(if $(filter true,$(PRODUCT_USE_DYNAMIC_PARTITIONS)), \ |
| echo "use_dynamic_partitions=true" >> $(1)) |
| $(if $(filter true,$(PRODUCT_RETROFIT_DYNAMIC_PARTITIONS)), \ |
| echo "dynamic_partition_retrofit=true" >> $(1)) |
| echo "lpmake=$(notdir $(LPMAKE))" >> $(1) |
| $(if $(filter true,$(PRODUCT_BUILD_SUPER_PARTITION)), $(if $(BOARD_SUPER_PARTITION_SIZE), \ |
| echo "build_super_partition=true" >> $(1))) |
| $(if $(filter true,$(BOARD_BUILD_RETROFIT_DYNAMIC_PARTITIONS_OTA_PACKAGE)), \ |
| echo "build_retrofit_dynamic_partitions_ota_package=true" >> $(1)) |
| echo "super_metadata_device=$(BOARD_SUPER_PARTITION_METADATA_DEVICE)" >> $(1) |
| $(if $(BOARD_SUPER_PARTITION_BLOCK_DEVICES), \ |
| echo "super_block_devices=$(BOARD_SUPER_PARTITION_BLOCK_DEVICES)" >> $(1)) |
| $(foreach device,$(BOARD_SUPER_PARTITION_BLOCK_DEVICES), \ |
| echo "super_$(device)_device_size=$(BOARD_SUPER_PARTITION_$(call to-upper,$(device))_DEVICE_SIZE)" >> $(1);) |
| $(if $(BOARD_SUPER_PARTITION_PARTITION_LIST), \ |
| echo "dynamic_partition_list=$(call filter-out-missing-vendor, $(BOARD_SUPER_PARTITION_PARTITION_LIST))" >> $(1)) |
| $(if $(BOARD_SUPER_PARTITION_GROUPS), |
| echo "super_partition_groups=$(BOARD_SUPER_PARTITION_GROUPS)" >> $(1)) |
| $(foreach group,$(BOARD_SUPER_PARTITION_GROUPS), \ |
| echo "super_$(group)_group_size=$(BOARD_$(call to-upper,$(group))_SIZE)" >> $(1); \ |
| $(if $(BOARD_$(call to-upper,$(group))_PARTITION_LIST), \ |
| echo "super_$(group)_partition_list=$(call filter-out-missing-vendor, $(BOARD_$(call to-upper,$(group))_PARTITION_LIST))" >> $(1);)) |
| $(if $(filter true,$(TARGET_USERIMAGES_SPARSE_EXT_DISABLED)), \ |
| echo "build_non_sparse_super_partition=true" >> $(1)) |
| $(if $(filter true,$(TARGET_USERIMAGES_SPARSE_F2FS_DISABLED)), \ |
| echo "build_non_sparse_super_partition=true" >> $(1)) |
| $(if $(filter true,$(BOARD_SUPER_IMAGE_IN_UPDATE_PACKAGE)), \ |
| echo "super_image_in_update_package=true" >> $(1)) |
| $(if $(BOARD_SUPER_PARTITION_SIZE), \ |
| echo "super_partition_size=$(BOARD_SUPER_PARTITION_SIZE)" >> $(1)) |
| $(if $(BOARD_SUPER_PARTITION_ALIGNMENT), \ |
| echo "super_partition_alignment=$(BOARD_SUPER_PARTITION_ALIGNMENT)" >> $(1)) |
| $(if $(BOARD_SUPER_PARTITION_WARN_LIMIT), \ |
| echo "super_partition_warn_limit=$(BOARD_SUPER_PARTITION_WARN_LIMIT)" >> $(1)) |
| $(if $(BOARD_SUPER_PARTITION_ERROR_LIMIT), \ |
| echo "super_partition_error_limit=$(BOARD_SUPER_PARTITION_ERROR_LIMIT)" >> $(1)) |
| $(if $(filter true,$(PRODUCT_VIRTUAL_AB_OTA)), \ |
| echo "virtual_ab=true" >> $(1)) |
| $(if $(filter true,$(PRODUCT_VIRTUAL_AB_OTA_RETROFIT)), \ |
| echo "virtual_ab_retrofit=true" >> $(1)) |
| endef |
| |
| # By conditionally including the dependency of the target files package on the |
| # full system image deps, we speed up builds that do not build the system |
| # image. |
| ifdef BUILDING_SYSTEM_IMAGE |
| $(BUILT_TARGET_FILES_PACKAGE): $(FULL_SYSTEMIMAGE_DEPS) |
| endif |
| |
| ifeq ($(BUILD_QEMU_IMAGES),true) |
| MK_VBMETA_BOOT_KERNEL_CMDLINE_SH := device/generic/goldfish/tools/mk_vbmeta_boot_params.sh |
| $(BUILT_TARGET_FILES_PACKAGE): $(MK_VBMETA_BOOT_KERNEL_CMDLINE_SH) |
| endif |
| |
| # Depending on the various images guarantees that the underlying |
| # directories are up-to-date. |
| $(BUILT_TARGET_FILES_PACKAGE): \ |
| $(INSTALLED_RAMDISK_TARGET) \ |
| $(INSTALLED_BOOTIMAGE_TARGET) \ |
| $(INSTALLED_VENDOR_BOOTIMAGE_TARGET) \ |
| $(INSTALLED_RADIOIMAGE_TARGET) \ |
| $(INSTALLED_RECOVERYIMAGE_TARGET) \ |
| $(INSTALLED_USERDATAIMAGE_TARGET) \ |
| $(INSTALLED_CACHEIMAGE_TARGET) \ |
| $(INSTALLED_VENDORIMAGE_TARGET) \ |
| $(INSTALLED_PRODUCTIMAGE_TARGET) \ |
| $(INSTALLED_SYSTEM_EXTIMAGE_TARGET) \ |
| $(INSTALLED_VBMETAIMAGE_TARGET) \ |
| $(INSTALLED_ODMIMAGE_TARGET) \ |
| $(INSTALLED_DTBOIMAGE_TARGET) \ |
| $(INTERNAL_SYSTEMOTHERIMAGE_FILES) \ |
| $(INSTALLED_ANDROID_INFO_TXT_TARGET) \ |
| $(INSTALLED_KERNEL_TARGET) \ |
| $(INSTALLED_DTBIMAGE_TARGET) \ |
| $(INSTALLED_2NDBOOTLOADER_TARGET) \ |
| $(BOARD_PREBUILT_DTBOIMAGE) \ |
| $(BOARD_PREBUILT_RECOVERY_DTBOIMAGE) \ |
| $(BOARD_RECOVERY_ACPIO) \ |
| $(PRODUCT_SYSTEM_BASE_FS_PATH) \ |
| $(PRODUCT_VENDOR_BASE_FS_PATH) \ |
| $(PRODUCT_PRODUCT_BASE_FS_PATH) \ |
| $(PRODUCT_SYSTEM_EXT_BASE_FS_PATH) \ |
| $(PRODUCT_ODM_BASE_FS_PATH) \ |
| $(LPMAKE) \ |
| $(SELINUX_FC) \ |
| $(INSTALLED_MISC_INFO_TARGET) \ |
| $(APKCERTS_FILE) \ |
| $(SOONG_APEX_KEYS_FILE) \ |
| $(SOONG_ZIP) \ |
| $(HOST_OUT_EXECUTABLES)/fs_config \ |
| $(ADD_IMG_TO_TARGET_FILES) \ |
| $(MAKE_RECOVERY_PATCH) \ |
| $(BUILT_KERNEL_CONFIGS_FILE) \ |
| $(BUILT_KERNEL_VERSION_FILE) \ |
| | $(ACP) |
| @echo "Package target files: $@" |
| $(call create-system-vendor-symlink) |
| $(call create-system-product-symlink) |
| $(call create-system-system_ext-symlink) |
| $(call create-vendor-odm-symlink) |
| $(hide) rm -rf $@ $@.list $(zip_root) |
| $(hide) mkdir -p $(dir $@) $(zip_root) |
| ifneq (,$(INSTALLED_RECOVERYIMAGE_TARGET)$(filter true,$(BOARD_USES_RECOVERY_AS_BOOT))) |
| @# Components of the recovery image |
| $(hide) mkdir -p $(zip_root)/$(PRIVATE_RECOVERY_OUT) |
| $(hide) $(call package_files-copy-root, \ |
| $(TARGET_RECOVERY_ROOT_OUT),$(zip_root)/$(PRIVATE_RECOVERY_OUT)/RAMDISK) |
| ifdef INSTALLED_KERNEL_TARGET |
| cp $(INSTALLED_KERNEL_TARGET) $(zip_root)/$(PRIVATE_RECOVERY_OUT)/ |
| endif |
| ifdef INSTALLED_VENDOR_BOOTIMAGE_TARGET |
| echo "$(GENERIC_KERNEL_CMDLINE)" > $(zip_root)/$(PRIVATE_RECOVERY_OUT)/cmdline |
| else # INSTALLED_VENDOR_BOOTIMAGE_TARGET not defined |
| ifdef INSTALLED_2NDBOOTLOADER_TARGET |
| cp $(INSTALLED_2NDBOOTLOADER_TARGET) $(zip_root)/$(PRIVATE_RECOVERY_OUT)/second |
| endif |
| ifdef BOARD_INCLUDE_RECOVERY_DTBO |
| ifdef BOARD_PREBUILT_RECOVERY_DTBOIMAGE |
| cp $(BOARD_PREBUILT_RECOVERY_DTBOIMAGE) $(zip_root)/$(PRIVATE_RECOVERY_OUT)/recovery_dtbo |
| else |
| cp $(BOARD_PREBUILT_DTBOIMAGE) $(zip_root)/$(PRIVATE_RECOVERY_OUT)/recovery_dtbo |
| endif |
| endif # BOARD_INCLUDE_RECOVERY_DTBO |
| ifdef BOARD_INCLUDE_RECOVERY_ACPIO |
| cp $(BOARD_RECOVERY_ACPIO) $(zip_root)/$(PRIVATE_RECOVERY_OUT)/recovery_acpio |
| endif |
| ifdef INSTALLED_DTBIMAGE_TARGET |
| cp $(INSTALLED_DTBIMAGE_TARGET) $(zip_root)/$(PRIVATE_RECOVERY_OUT)/dtb |
| endif |
| ifdef INTERNAL_KERNEL_CMDLINE |
| echo "$(INTERNAL_KERNEL_CMDLINE)" > $(zip_root)/$(PRIVATE_RECOVERY_OUT)/cmdline |
| endif |
| ifdef BOARD_KERNEL_BASE |
| echo "$(BOARD_KERNEL_BASE)" > $(zip_root)/$(PRIVATE_RECOVERY_OUT)/base |
| endif |
| ifdef BOARD_KERNEL_PAGESIZE |
| echo "$(BOARD_KERNEL_PAGESIZE)" > $(zip_root)/$(PRIVATE_RECOVERY_OUT)/pagesize |
| endif |
| endif # INSTALLED_VENDOR_BOOTIMAGE_TARGET not defined |
| endif # INSTALLED_RECOVERYIMAGE_TARGET defined or BOARD_USES_RECOVERY_AS_BOOT is true |
| @# Components of the boot image |
| $(hide) mkdir -p $(zip_root)/BOOT |
| $(hide) mkdir -p $(zip_root)/ROOT |
| $(hide) $(call package_files-copy-root, \ |
| $(TARGET_ROOT_OUT),$(zip_root)/ROOT) |
| @# If we are using recovery as boot, this is already done when processing recovery. |
| ifneq ($(BOARD_USES_RECOVERY_AS_BOOT),true) |
| ifneq ($(BOARD_BUILD_SYSTEM_ROOT_IMAGE),true) |
| $(hide) $(call package_files-copy-root, \ |
| $(TARGET_RAMDISK_OUT),$(zip_root)/BOOT/RAMDISK) |
| endif |
| ifdef INSTALLED_KERNEL_TARGET |
| $(hide) cp $(INSTALLED_KERNEL_TARGET) $(zip_root)/BOOT/kernel |
| endif |
| ifndef INSTALLED_VENDOR_BOOTIMAGE_TARGET |
| ifdef INSTALLED_2NDBOOTLOADER_TARGET |
| cp $(INSTALLED_2NDBOOTLOADER_TARGET) $(zip_root)/BOOT/second |
| endif |
| ifdef INSTALLED_DTBIMAGE_TARGET |
| cp $(INSTALLED_DTBIMAGE_TARGET) $(zip_root)/BOOT/dtb |
| endif |
| echo "$(INTERNAL_KERNEL_CMDLINE)" > $(zip_root)/BOOT/cmdline |
| ifdef BOARD_KERNEL_BASE |
| echo "$(BOARD_KERNEL_BASE)" > $(zip_root)/BOOT/base |
| endif |
| ifdef BOARD_KERNEL_PAGESIZE |
| echo "$(BOARD_KERNEL_PAGESIZE)" > $(zip_root)/BOOT/pagesize |
| endif |
| else # INSTALLED_VENDOR_BOOTIMAGE_TARGET defined |
| echo "$(GENERIC_KERNEL_CMDLINE)" > $(zip_root)/BOOT/cmdline |
| endif # INSTALLED_VENDOR_BOOTIMAGE_TARGET defined |
| endif # BOARD_USES_RECOVERY_AS_BOOT not true |
| $(hide) $(foreach t,$(INSTALLED_RADIOIMAGE_TARGET),\ |
| mkdir -p $(zip_root)/RADIO; \ |
| cp $(t) $(zip_root)/RADIO/$(notdir $(t));) |
| ifdef INSTALLED_VENDOR_BOOTIMAGE_TARGET |
| mkdir -p $(zip_root)/VENDOR_BOOT |
| $(call package_files-copy-root, \ |
| $(TARGET_VENDOR_RAMDISK_OUT),$(zip_root)/VENDOR_BOOT/RAMDISK) |
| ifdef INSTALLED_DTBIMAGE_TARGET |
| cp $(INSTALLED_DTBIMAGE_TARGET) $(zip_root)/VENDOR_BOOT/dtb |
| endif |
| ifdef BOARD_KERNEL_BASE |
| echo "$(BOARD_KERNEL_BASE)" > $(zip_root)/VENDOR_BOOT/base |
| endif |
| ifdef BOARD_KERNEL_PAGESIZE |
| echo "$(BOARD_KERNEL_PAGESIZE)" > $(zip_root)/VENDOR_BOOT/pagesize |
| endif |
| echo "$(INTERNAL_KERNEL_CMDLINE)" > $(zip_root)/VENDOR_BOOT/vendor_cmdline |
| endif # INSTALLED_VENDOR_BOOTIMAGE_TARGET |
| ifdef BUILDING_SYSTEM_IMAGE |
| @# Contents of the system image |
| $(hide) $(call package_files-copy-root, \ |
| $(SYSTEMIMAGE_SOURCE_DIR),$(zip_root)/SYSTEM) |
| endif |
| ifdef BUILDING_USERDATA_IMAGE |
| @# Contents of the data image |
| $(hide) $(call package_files-copy-root, \ |
| $(TARGET_OUT_DATA),$(zip_root)/DATA) |
| endif |
| ifdef BUILDING_VENDOR_IMAGE |
| @# Contents of the vendor image |
| $(hide) $(call package_files-copy-root, \ |
| $(TARGET_OUT_VENDOR),$(zip_root)/VENDOR) |
| endif |
| ifdef BUILDING_PRODUCT_IMAGE |
| @# Contents of the product image |
| $(hide) $(call package_files-copy-root, \ |
| $(TARGET_OUT_PRODUCT),$(zip_root)/PRODUCT) |
| endif |
| ifdef BUILDING_SYSTEM_EXT_IMAGE |
| @# Contents of the system_ext image |
| $(hide) $(call package_files-copy-root, \ |
| $(TARGET_OUT_SYSTEM_EXT),$(zip_root)/SYSTEM_EXT) |
| endif |
| ifdef BUILDING_ODM_IMAGE |
| @# Contents of the odm image |
| $(hide) $(call package_files-copy-root, \ |
| $(TARGET_OUT_ODM),$(zip_root)/ODM) |
| endif |
| ifdef BUILDING_SYSTEM_OTHER_IMAGE |
| @# Contents of the system_other image |
| $(hide) $(call package_files-copy-root, \ |
| $(TARGET_OUT_SYSTEM_OTHER),$(zip_root)/SYSTEM_OTHER) |
| endif |
| @# Extra contents of the OTA package |
| $(hide) mkdir -p $(zip_root)/OTA |
| $(hide) cp $(INSTALLED_ANDROID_INFO_TXT_TARGET) $(zip_root)/OTA/ |
| ifneq ($(AB_OTA_UPDATER),true) |
| ifneq ($(built_ota_tools),) |
| $(hide) mkdir -p $(zip_root)/OTA/bin |
| $(hide) cp $(PRIVATE_OTA_TOOLS) $(zip_root)/OTA/bin/ |
| endif |
| endif |
| @# Files that do not end up in any images, but are necessary to |
| @# build them. |
| $(hide) mkdir -p $(zip_root)/META |
| $(hide) cp $(APKCERTS_FILE) $(zip_root)/META/apkcerts.txt |
| $(hide) cp $(SOONG_APEX_KEYS_FILE) $(zip_root)/META/apexkeys.txt |
| ifneq ($(tool_extension),) |
| $(hide) cp $(PRIVATE_TOOL_EXTENSION) $(zip_root)/META/ |
| endif |
| $(hide) echo "$(PRODUCT_OTA_PUBLIC_KEYS)" > $(zip_root)/META/otakeys.txt |
| $(hide) cp $(SELINUX_FC) $(zip_root)/META/file_contexts.bin |
| $(hide) cp $(INSTALLED_MISC_INFO_TARGET) $(zip_root)/META/misc_info.txt |
| ifneq ($(PRODUCT_SYSTEM_BASE_FS_PATH),) |
| $(hide) cp $(PRODUCT_SYSTEM_BASE_FS_PATH) \ |
| $(zip_root)/META/$(notdir $(PRODUCT_SYSTEM_BASE_FS_PATH)) |
| endif |
| ifneq ($(PRODUCT_VENDOR_BASE_FS_PATH),) |
| $(hide) cp $(PRODUCT_VENDOR_BASE_FS_PATH) \ |
| $(zip_root)/META/$(notdir $(PRODUCT_VENDOR_BASE_FS_PATH)) |
| endif |
| ifneq ($(PRODUCT_PRODUCT_BASE_FS_PATH),) |
| $(hide) cp $(PRODUCT_PRODUCT_BASE_FS_PATH) \ |
| $(zip_root)/META/$(notdir $(PRODUCT_PRODUCT_BASE_FS_PATH)) |
| endif |
| ifneq ($(PRODUCT_SYSTEM_EXT_BASE_FS_PATH),) |
| $(hide) cp $(PRODUCT_SYSTEM_EXT_BASE_FS_PATH) \ |
| $(zip_root)/META/$(notdir $(PRODUCT_SYSTEM_EXT_BASE_FS_PATH)) |
| endif |
| ifneq ($(PRODUCT_ODM_BASE_FS_PATH),) |
| $(hide) cp $(PRODUCT_ODM_BASE_FS_PATH) \ |
| $(zip_root)/META/$(notdir $(PRODUCT_ODM_BASE_FS_PATH)) |
| endif |
| ifneq ($(AB_OTA_UPDATER),true) |
| ifneq ($(INSTALLED_RECOVERYIMAGE_TARGET),) |
| $(hide) PATH=$(INTERNAL_USERIMAGES_BINARY_PATHS):$$PATH MKBOOTIMG=$(MKBOOTIMG) \ |
| $(MAKE_RECOVERY_PATCH) $(zip_root) $(zip_root) |
| endif |
| endif |
| ifeq ($(AB_OTA_UPDATER),true) |
| @# When using the A/B updater, include the updater config files in the zip. |
| $(hide) cp $(TOPDIR)system/update_engine/update_engine.conf $(zip_root)/META/update_engine_config.txt |
| $(hide) for part in $(AB_OTA_PARTITIONS); do \ |
| echo "$${part}" >> $(zip_root)/META/ab_partitions.txt; \ |
| done |
| $(hide) for conf in $(AB_OTA_POSTINSTALL_CONFIG); do \ |
| echo "$${conf}" >> $(zip_root)/META/postinstall_config.txt; \ |
| done |
| ifdef OSRELEASED_DIRECTORY |
| $(hide) cp $(TARGET_OUT_OEM)/$(OSRELEASED_DIRECTORY)/product_id $(zip_root)/META/product_id.txt |
| $(hide) cp $(TARGET_OUT_OEM)/$(OSRELEASED_DIRECTORY)/product_version $(zip_root)/META/product_version.txt |
| $(hide) cp $(TARGET_OUT_ETC)/$(OSRELEASED_DIRECTORY)/system_version $(zip_root)/META/system_version.txt |
| endif |
| endif |
| ifeq ($(BREAKPAD_GENERATE_SYMBOLS),true) |
| @# If breakpad symbols have been generated, add them to the zip. |
| $(hide) cp -R $(TARGET_OUT_BREAKPAD) $(zip_root)/BREAKPAD |
| endif |
| ifdef BOARD_PREBUILT_VENDORIMAGE |
| $(hide) mkdir -p $(zip_root)/IMAGES |
| $(hide) cp $(INSTALLED_VENDORIMAGE_TARGET) $(zip_root)/IMAGES/ |
| endif |
| ifdef BOARD_PREBUILT_PRODUCTIMAGE |
| $(hide) mkdir -p $(zip_root)/IMAGES |
| $(hide) cp $(INSTALLED_PRODUCTIMAGE_TARGET) $(zip_root)/IMAGES/ |
| endif |
| ifdef BOARD_PREBUILT_SYSTEM_EXTIMAGE |
| $(hide) mkdir -p $(zip_root)/IMAGES |
| $(hide) cp $(INSTALLED_SYSTEM_EXTIMAGE_TARGET) $(zip_root)/IMAGES/ |
| endif |
| ifdef BOARD_PREBUILT_BOOTIMAGE |
| $(hide) mkdir -p $(zip_root)/IMAGES |
| $(hide) cp $(INSTALLED_BOOTIMAGE_TARGET) $(zip_root)/IMAGES/ |
| endif |
| ifdef BOARD_PREBUILT_ODMIMAGE |
| $(hide) mkdir -p $(zip_root)/IMAGES |
| $(hide) cp $(INSTALLED_ODMIMAGE_TARGET) $(zip_root)/IMAGES/ |
| endif |
| ifdef BOARD_PREBUILT_DTBOIMAGE |
| $(hide) mkdir -p $(zip_root)/PREBUILT_IMAGES |
| $(hide) cp $(INSTALLED_DTBOIMAGE_TARGET) $(zip_root)/PREBUILT_IMAGES/ |
| endif # BOARD_PREBUILT_DTBOIMAGE |
| @# The radio images in BOARD_PACK_RADIOIMAGES will be additionally copied from RADIO/ into |
| @# IMAGES/, which then will be added into <product>-img.zip. Such images must be listed in |
| @# INSTALLED_RADIOIMAGE_TARGET. |
| $(hide) $(foreach part,$(BOARD_PACK_RADIOIMAGES), \ |
| echo $(part) >> $(zip_root)/META/pack_radioimages.txt;) |
| @# Run fs_config on all the system, vendor, boot ramdisk, |
| @# and recovery ramdisk files in the zip, and save the output |
| ifdef BUILDING_SYSTEM_IMAGE |
| $(hide) $(call fs_config,$(zip_root)/SYSTEM,system/) > $(zip_root)/META/filesystem_config.txt |
| endif |
| ifdef BUILDING_VENDOR_IMAGE |
| $(hide) $(call fs_config,$(zip_root)/VENDOR,vendor/) > $(zip_root)/META/vendor_filesystem_config.txt |
| endif |
| ifdef BUILDING_PRODUCT_IMAGE |
| $(hide) $(call fs_config,$(zip_root)/PRODUCT,product/) > $(zip_root)/META/product_filesystem_config.txt |
| endif |
| ifdef BUILDING_SYSTEM_EXT_IMAGE |
| $(hide) $(call fs_config,$(zip_root)/SYSTEM_EXT,system_ext/) > $(zip_root)/META/system_ext_filesystem_config.txt |
| endif |
| ifdef BUILDING_ODM_IMAGE |
| $(hide) $(call fs_config,$(zip_root)/ODM,odm/) > $(zip_root)/META/odm_filesystem_config.txt |
| endif |
| @# ROOT always contains the files for the root under normal boot. |
| $(hide) $(call fs_config,$(zip_root)/ROOT,) > $(zip_root)/META/root_filesystem_config.txt |
| ifeq ($(BOARD_USES_RECOVERY_AS_BOOT),true) |
| @# BOOT/RAMDISK exists and contains the ramdisk for recovery if using BOARD_USES_RECOVERY_AS_BOOT. |
| $(hide) $(call fs_config,$(zip_root)/BOOT/RAMDISK,) > $(zip_root)/META/boot_filesystem_config.txt |
| endif |
| ifneq ($(INSTALLED_VENDOR_BOOTIMAGE_TARGET),) |
| $(call fs_config,$(zip_root)/VENDOR_BOOT/RAMDISK,) > $(zip_root)/META/vendor_boot_filesystem_config.txt |
| endif |
| ifneq ($(BOARD_BUILD_SYSTEM_ROOT_IMAGE),true) |
| @# BOOT/RAMDISK also exists and contains the first stage ramdisk if not using BOARD_BUILD_SYSTEM_ROOT_IMAGE. |
| $(hide) $(call fs_config,$(zip_root)/BOOT/RAMDISK,) > $(zip_root)/META/boot_filesystem_config.txt |
| endif |
| ifneq ($(INSTALLED_RECOVERYIMAGE_TARGET),) |
| $(hide) $(call fs_config,$(zip_root)/RECOVERY/RAMDISK,) > $(zip_root)/META/recovery_filesystem_config.txt |
| endif |
| ifdef BUILDING_SYSTEM_OTHER_IMAGE |
| $(hide) $(call fs_config,$(zip_root)/SYSTEM_OTHER,system/) > $(zip_root)/META/system_other_filesystem_config.txt |
| endif |
| @# Metadata for compatibility verification. |
| ifdef BUILT_KERNEL_CONFIGS_FILE |
| $(hide) cp $(BUILT_KERNEL_CONFIGS_FILE) $(zip_root)/META/kernel_configs.txt |
| endif |
| ifdef BUILT_KERNEL_VERSION_FILE |
| $(hide) cp $(BUILT_KERNEL_VERSION_FILE) $(zip_root)/META/kernel_version.txt |
| endif |
| rm -rf $(zip_root)/META/dynamic_partitions_info.txt |
| ifeq (true,$(PRODUCT_USE_DYNAMIC_PARTITIONS)) |
| $(call dump-dynamic-partitions-info, $(zip_root)/META/dynamic_partitions_info.txt) |
| endif |
| PATH=$(INTERNAL_USERIMAGES_BINARY_PATHS):$$PATH MKBOOTIMG=$(MKBOOTIMG) \ |
| $(ADD_IMG_TO_TARGET_FILES) -a -v -p $(HOST_OUT) $(zip_root) |
| ifeq ($(BUILD_QEMU_IMAGES),true) |
| $(hide) AVBTOOL=$(AVBTOOL) $(MK_VBMETA_BOOT_KERNEL_CMDLINE_SH) $(zip_root)/IMAGES/vbmeta.img \ |
| $(zip_root)/IMAGES/system.img $(zip_root)/IMAGES/VerifiedBootParams.textproto |
| endif |
| @# Zip everything up, preserving symlinks and placing META/ files first to |
| @# help early validation of the .zip file while uploading it. |
| $(hide) find $(zip_root)/META | sort >$@.list |
| $(hide) find $(zip_root) -path $(zip_root)/META -prune -o -print | sort >>$@.list |
| $(hide) $(SOONG_ZIP) -d -o $@ -C $(zip_root) -l $@.list |
| |
| .PHONY: target-files-package |
| target-files-package: $(BUILT_TARGET_FILES_PACKAGE) |
| |
| ifneq ($(filter $(MAKECMDGOALS),target-files-package),) |
| $(call dist-for-goals, target-files-package, $(BUILT_TARGET_FILES_PACKAGE)) |
| endif |
| |
| # ----------------------------------------------------------------- |
| # NDK Sysroot Package |
| NDK_SYSROOT_TARGET := $(PRODUCT_OUT)/ndk_sysroot.tar.bz2 |
| $(NDK_SYSROOT_TARGET): $(SOONG_OUT_DIR)/ndk.timestamp |
| @echo Package NDK sysroot... |
| $(hide) tar cjf $@ -C $(SOONG_OUT_DIR) ndk |
| |
| $(call dist-for-goals,sdk,$(NDK_SYSROOT_TARGET)) |
| |
| ifeq ($(build_ota_package),true) |
| # ----------------------------------------------------------------- |
| # OTA update package |
| |
| # $(1): output file |
| # $(2): additional args |
| define build-ota-package-target |
| PATH=$(INTERNAL_USERIMAGES_BINARY_PATHS):$$PATH \ |
| $(OTA_FROM_TARGET_FILES) \ |
| --verbose \ |
| --extracted_input_target_files $(patsubst %.zip,%,$(BUILT_TARGET_FILES_PACKAGE)) \ |
| --path $(HOST_OUT) \ |
| $(if $(OEM_OTA_CONFIG), --oem_settings $(OEM_OTA_CONFIG)) \ |
| $(2) \ |
| $(BUILT_TARGET_FILES_PACKAGE) $(1) |
| endef |
| |
| name := $(TARGET_PRODUCT) |
| ifeq ($(TARGET_BUILD_TYPE),debug) |
| name := $(name)_debug |
| endif |
| name := $(name)-ota-$(FILE_NAME_TAG) |
| |
| INTERNAL_OTA_PACKAGE_TARGET := $(PRODUCT_OUT)/$(name).zip |
| INTERNAL_OTA_METADATA := $(PRODUCT_OUT)/ota_metadata |
| |
| $(INTERNAL_OTA_PACKAGE_TARGET): KEY_CERT_PAIR := $(DEFAULT_KEY_CERT_PAIR) |
| $(INTERNAL_OTA_PACKAGE_TARGET): .KATI_IMPLICIT_OUTPUTS := $(INTERNAL_OTA_METADATA) |
| $(INTERNAL_OTA_PACKAGE_TARGET): $(BUILT_TARGET_FILES_PACKAGE) $(OTA_FROM_TARGET_FILES) |
| @echo "Package OTA: $@" |
| $(call build-ota-package-target,$@,-k $(KEY_CERT_PAIR) --output_metadata_path $(INTERNAL_OTA_METADATA)) |
| |
| .PHONY: otapackage |
| otapackage: $(INTERNAL_OTA_PACKAGE_TARGET) |
| |
| ifeq ($(BOARD_BUILD_RETROFIT_DYNAMIC_PARTITIONS_OTA_PACKAGE),true) |
| name := $(TARGET_PRODUCT) |
| ifeq ($(TARGET_BUILD_TYPE),debug) |
| name := $(name)_debug |
| endif |
| name := $(name)-ota-retrofit-$(FILE_NAME_TAG) |
| |
| INTERNAL_OTA_RETROFIT_DYNAMIC_PARTITIONS_PACKAGE_TARGET := $(PRODUCT_OUT)/$(name).zip |
| $(INTERNAL_OTA_RETROFIT_DYNAMIC_PARTITIONS_PACKAGE_TARGET): KEY_CERT_PAIR := $(DEFAULT_KEY_CERT_PAIR) |
| $(INTERNAL_OTA_RETROFIT_DYNAMIC_PARTITIONS_PACKAGE_TARGET): \ |
| $(BUILT_TARGET_FILES_PACKAGE) \ |
| $(OTA_FROM_TARGET_FILES) |
| @echo "Package OTA (retrofit dynamic partitions): $@" |
| $(call build-ota-package-target,$@,-k $(KEY_CERT_PAIR) --retrofit_dynamic_partitions) |
| |
| .PHONY: otardppackage |
| |
| otapackage otardppackage: $(INTERNAL_OTA_RETROFIT_DYNAMIC_PARTITIONS_PACKAGE_TARGET) |
| |
| endif # BOARD_BUILD_RETROFIT_DYNAMIC_PARTITIONS_OTA_PACKAGE |
| |
| endif # build_ota_package |
| |
| # ----------------------------------------------------------------- |
| # A zip of the appcompat directory containing logs |
| APPCOMPAT_ZIP := $(PRODUCT_OUT)/appcompat.zip |
| # For apps_only build we'll establish the dependency later in build/make/core/main.mk. |
| ifndef TARGET_BUILD_APPS |
| $(APPCOMPAT_ZIP): $(INSTALLED_SYSTEMIMAGE_TARGET) \ |
| $(INSTALLED_RAMDISK_TARGET) \ |
| $(INSTALLED_BOOTIMAGE_TARGET) \ |
| $(INSTALLED_USERDATAIMAGE_TARGET) \ |
| $(INSTALLED_VENDORIMAGE_TARGET) \ |
| $(INSTALLED_PRODUCTIMAGE_TARGET) \ |
| $(INSTALLED_SYSTEM_EXTIMAGE_TARGET) |
| endif |
| $(APPCOMPAT_ZIP): PRIVATE_LIST_FILE := $(call intermediates-dir-for,PACKAGING,appcompat)/filelist |
| $(APPCOMPAT_ZIP): $(SOONG_ZIP) |
| @echo "appcompat logs: $@" |
| $(hide) rm -rf $@ $(PRIVATE_LIST_FILE) |
| $(hide) mkdir -p $(dir $@) $(PRODUCT_OUT)/appcompat $(dir $(PRIVATE_LIST_FILE)) |
| $(hide) find $(PRODUCT_OUT)/appcompat | sort >$(PRIVATE_LIST_FILE) |
| $(hide) $(SOONG_ZIP) -d -o $@ -C $(PRODUCT_OUT)/appcompat -l $(PRIVATE_LIST_FILE) |
| |
| # ----------------------------------------------------------------- |
| # A zip of the symbols directory. Keep the full paths to make it |
| # more obvious where these files came from. |
| # |
| name := $(TARGET_PRODUCT) |
| ifeq ($(TARGET_BUILD_TYPE),debug) |
| name := $(name)_debug |
| endif |
| name := $(name)-symbols-$(FILE_NAME_TAG) |
| |
| SYMBOLS_ZIP := $(PRODUCT_OUT)/$(name).zip |
| # For apps_only build we'll establish the dependency later in build/make/core/main.mk. |
| ifndef TARGET_BUILD_APPS |
| $(SYMBOLS_ZIP): $(INSTALLED_SYSTEMIMAGE_TARGET) \ |
| $(INSTALLED_RAMDISK_TARGET) \ |
| $(INSTALLED_BOOTIMAGE_TARGET) \ |
| $(INSTALLED_USERDATAIMAGE_TARGET) \ |
| $(INSTALLED_VENDORIMAGE_TARGET) \ |
| $(INSTALLED_PRODUCTIMAGE_TARGET) \ |
| $(INSTALLED_SYSTEM_EXTIMAGE_TARGET) \ |
| $(INSTALLED_ODMIMAGE_TARGET) \ |
| $(updater_dep) |
| endif |
| $(SYMBOLS_ZIP): PRIVATE_LIST_FILE := $(call intermediates-dir-for,PACKAGING,symbols)/filelist |
| $(SYMBOLS_ZIP): $(SOONG_ZIP) |
| @echo "Package symbols: $@" |
| $(hide) rm -rf $@ $(PRIVATE_LIST_FILE) |
| $(hide) mkdir -p $(dir $@) $(TARGET_OUT_UNSTRIPPED) $(dir $(PRIVATE_LIST_FILE)) |
| $(hide) find -L $(TARGET_OUT_UNSTRIPPED) -type f | sort >$(PRIVATE_LIST_FILE) |
| $(hide) $(SOONG_ZIP) --ignore_missing_files -d -o $@ -C $(OUT_DIR)/.. -l $(PRIVATE_LIST_FILE) |
| # ----------------------------------------------------------------- |
| # A zip of the coverage directory. |
| # |
| name := gcov-report-files-all |
| ifeq ($(TARGET_BUILD_TYPE),debug) |
| name := $(name)_debug |
| endif |
| COVERAGE_ZIP := $(PRODUCT_OUT)/$(name).zip |
| ifndef TARGET_BUILD_APPS |
| $(COVERAGE_ZIP): $(INSTALLED_SYSTEMIMAGE_TARGET) \ |
| $(INSTALLED_RAMDISK_TARGET) \ |
| $(INSTALLED_BOOTIMAGE_TARGET) \ |
| $(INSTALLED_USERDATAIMAGE_TARGET) \ |
| $(INSTALLED_VENDORIMAGE_TARGET) \ |
| $(INSTALLED_PRODUCTIMAGE_TARGET) \ |
| $(INSTALLED_SYSTEM_EXTIMAGE_TARGET) \ |
| $(INSTALLED_ODMIMAGE_TARGET) |
| endif |
| $(COVERAGE_ZIP): PRIVATE_LIST_FILE := $(call intermediates-dir-for,PACKAGING,coverage)/filelist |
| $(COVERAGE_ZIP): $(SOONG_ZIP) |
| @echo "Package coverage: $@" |
| $(hide) rm -rf $@ $(PRIVATE_LIST_FILE) |
| $(hide) mkdir -p $(dir $@) $(TARGET_OUT_COVERAGE) $(dir $(PRIVATE_LIST_FILE)) |
| $(hide) find $(TARGET_OUT_COVERAGE) | sort >$(PRIVATE_LIST_FILE) |
| $(hide) $(SOONG_ZIP) -d -o $@ -C $(TARGET_OUT_COVERAGE) -l $(PRIVATE_LIST_FILE) |
| |
| #------------------------------------------------------------------ |
| # Export the LLVM profile data tool and dependencies for Clang coverage processing |
| # |
| ifeq (true,$(CLANG_COVERAGE)) |
| LLVM_PROFDATA := $(LLVM_PREBUILTS_BASE)/linux-x86/$(LLVM_PREBUILTS_VERSION)/bin/llvm-profdata |
| LIBCXX := $(LLVM_PREBUILTS_BASE)/linux-x86/$(LLVM_PREBUILTS_VERSION)/lib64/libc++.so.1 |
| PROFDATA_ZIP := $(PRODUCT_OUT)/llvm-profdata.zip |
| $(PROFDATA_ZIP): $(SOONG_ZIP) |
| $(hide) $(SOONG_ZIP) -d -o $@ -C $(LLVM_PREBUILTS_BASE)/linux-x86/$(LLVM_PREBUILTS_VERSION) -f $(LLVM_PROFDATA) -f $(LIBCXX) |
| |
| $(call dist-for-goals,droidcore,$(PROFDATA_ZIP)) |
| endif |
| |
| # ----------------------------------------------------------------- |
| # A zip of the Android Apps. Not keeping full path so that we don't |
| # include product names when distributing |
| # |
| name := $(TARGET_PRODUCT) |
| ifeq ($(TARGET_BUILD_TYPE),debug) |
| name := $(name)_debug |
| endif |
| name := $(name)-apps-$(FILE_NAME_TAG) |
| |
| APPS_ZIP := $(PRODUCT_OUT)/$(name).zip |
| $(APPS_ZIP): $(INSTALLED_SYSTEMIMAGE_TARGET) |
| @echo "Package apps: $@" |
| $(hide) rm -rf $@ |
| $(hide) mkdir -p $(dir $@) |
| $(hide) apps_to_zip=`find $(TARGET_OUT_APPS) $(TARGET_OUT_APPS_PRIVILEGED) -mindepth 2 -maxdepth 3 -name "*.apk"`; \ |
| if [ -z "$$apps_to_zip" ]; then \ |
| echo "No apps to zip up. Generating empty apps archive." ; \ |
| a=$$(mktemp /tmp/XXXXXXX) && touch $$a && zip $@ $$a && zip -d $@ $$a; \ |
| else \ |
| zip -qjX $@ $$apps_to_zip; \ |
| fi |
| |
| ifeq (true,$(EMMA_INSTRUMENT)) |
| #------------------------------------------------------------------ |
| # An archive of classes for use in generating code-coverage reports |
| # These are the uninstrumented versions of any classes that were |
| # to be instrumented. |
| # Any dependencies are set up later in build/make/core/main.mk. |
| |
| JACOCO_REPORT_CLASSES_ALL := $(PRODUCT_OUT)/jacoco-report-classes-all.jar |
| $(JACOCO_REPORT_CLASSES_ALL) : |
| @echo "Collecting uninstrumented classes" |
| find $(TARGET_COMMON_OUT_ROOT) $(HOST_COMMON_OUT_ROOT) -name "jacoco-report-classes.jar" 2>/dev/null | sort > $@.list |
| $(SOONG_ZIP) -o $@ -L 0 -C $(OUT_DIR) -P out -l $@.list |
| |
| endif # EMMA_INSTRUMENT=true |
| |
| |
| #------------------------------------------------------------------ |
| # A zip of Proguard obfuscation dictionary files. |
| # |
| PROGUARD_DICT_ZIP := $(PRODUCT_OUT)/$(TARGET_PRODUCT)-proguard-dict-$(FILE_NAME_TAG).zip |
| # For apps_only build we'll establish the dependency later in build/make/core/main.mk. |
| ifndef TARGET_BUILD_APPS |
| $(PROGUARD_DICT_ZIP): \ |
| $(INSTALLED_SYSTEMIMAGE_TARGET) \ |
| $(INSTALLED_RAMDISK_TARGET) \ |
| $(INSTALLED_BOOTIMAGE_TARGET) \ |
| $(INSTALLED_USERDATAIMAGE_TARGET) \ |
| $(INSTALLED_VENDORIMAGE_TARGET) \ |
| $(INSTALLED_PRODUCTIMAGE_TARGET) \ |
| $(INSTALLED_SYSTEM_EXTIMAGE_TARGET) \ |
| $(INSTALLED_ODMIMAGE_TARGET) \ |
| $(updater_dep) |
| endif |
| $(PROGUARD_DICT_ZIP): PRIVATE_LIST_FILE := $(call intermediates-dir-for,PACKAGING,proguard)/filelist |
| $(PROGUARD_DICT_ZIP): $(SOONG_ZIP) |
| @echo "Packaging Proguard obfuscation dictionary files." |
| mkdir -p $(dir $@) $(TARGET_OUT_COMMON_INTERMEDIATES)/APPS $(dir $(PRIVATE_LIST_FILE)) |
| find $(TARGET_OUT_COMMON_INTERMEDIATES)/APPS -name proguard_dictionary | \ |
| sed -e 's/\(.*\)\/proguard_dictionary/\0\n\1\/classes.jar/' > $(PRIVATE_LIST_FILE) |
| $(SOONG_ZIP) --ignore_missing_files -d -o $@ -C $(OUT_DIR)/.. -l $(PRIVATE_LIST_FILE) |
| |
| |
| ifeq (true,$(PRODUCT_USE_DYNAMIC_PARTITIONS)) |
| |
| # Dump variables used by build_super_image.py (for building super.img and super_empty.img). |
| # $(1): output file |
| define dump-super-image-info |
| $(call dump-dynamic-partitions-info,$(1)) |
| $(if $(filter true,$(AB_OTA_UPDATER)), \ |
| echo "ab_update=true" >> $(1)) |
| endef |
| |
| endif # PRODUCT_USE_DYNAMIC_PARTITIONS |
| |
| # ----------------------------------------------------------------- |
| # super partition image (dist) |
| |
| ifeq (true,$(PRODUCT_BUILD_SUPER_PARTITION)) |
| |
| # BOARD_SUPER_PARTITION_SIZE must be defined to build super image. |
| ifneq ($(BOARD_SUPER_PARTITION_SIZE),) |
| |
| ifneq (true,$(PRODUCT_RETROFIT_DYNAMIC_PARTITIONS)) |
| |
| # For real devices and for dist builds, build super image from target files to an intermediate directory. |
| INTERNAL_SUPERIMAGE_DIST_TARGET := $(call intermediates-dir-for,PACKAGING,super.img)/super.img |
| $(INTERNAL_SUPERIMAGE_DIST_TARGET): extracted_input_target_files := $(patsubst %.zip,%,$(BUILT_TARGET_FILES_PACKAGE)) |
| $(INTERNAL_SUPERIMAGE_DIST_TARGET): $(LPMAKE) $(BUILT_TARGET_FILES_PACKAGE) $(BUILD_SUPER_IMAGE) |
| $(call pretty,"Target super fs image from target files: $@") |
| PATH=$(dir $(LPMAKE)):$$PATH \ |
| $(BUILD_SUPER_IMAGE) -v $(extracted_input_target_files) $@ |
| |
| # Skip packing it in dist package because it is in update package. |
| ifneq (true,$(BOARD_SUPER_IMAGE_IN_UPDATE_PACKAGE)) |
| $(call dist-for-goals,dist_files,$(INTERNAL_SUPERIMAGE_DIST_TARGET)) |
| endif |
| |
| .PHONY: superimage_dist |
| superimage_dist: $(INTERNAL_SUPERIMAGE_DIST_TARGET) |
| |
| endif # PRODUCT_RETROFIT_DYNAMIC_PARTITIONS != "true" |
| endif # BOARD_SUPER_PARTITION_SIZE != "" |
| endif # PRODUCT_BUILD_SUPER_PARTITION == "true" |
| |
| # ----------------------------------------------------------------- |
| # super partition image for development |
| |
| ifeq (true,$(PRODUCT_BUILD_SUPER_PARTITION)) |
| ifneq ($(BOARD_SUPER_PARTITION_SIZE),) |
| ifneq (true,$(PRODUCT_RETROFIT_DYNAMIC_PARTITIONS)) |
| |
| # Build super.img by using $(INSTALLED_*IMAGE_TARGET) to $(1) |
| # $(1): built image path |
| # $(2): misc_info.txt path; its contents should match expectation of build_super_image.py |
| define build-superimage-target |
| mkdir -p $(dir $(2)) |
| rm -rf $(2) |
| $(call dump-super-image-info,$(2)) |
| $(foreach p,$(BOARD_SUPER_PARTITION_PARTITION_LIST), \ |
| echo "$(p)_image=$(INSTALLED_$(call to-upper,$(p))IMAGE_TARGET)" >> $(2);) |
| $(if $(BUILDING_SYSTEM_OTHER_IMAGE), $(if $(filter system,$(BOARD_SUPER_PARTITION_PARTITION_LIST)), \ |
| echo "system_other_image=$(INSTALLED_SYSTEMOTHERIMAGE_TARGET)" >> $(2);)) |
| mkdir -p $(dir $(1)) |
| PATH=$(dir $(LPMAKE)):$$PATH \ |
| $(BUILD_SUPER_IMAGE) -v $(2) $(1) |
| endef |
| |
| INSTALLED_SUPERIMAGE_TARGET := $(PRODUCT_OUT)/super.img |
| INSTALLED_SUPERIMAGE_DEPENDENCIES := $(LPMAKE) $(BUILD_SUPER_IMAGE) \ |
| $(foreach p, $(BOARD_SUPER_PARTITION_PARTITION_LIST), $(INSTALLED_$(call to-upper,$(p))IMAGE_TARGET)) |
| |
| ifdef BUILDING_SYSTEM_OTHER_IMAGE |
| ifneq ($(filter system,$(BOARD_SUPER_PARTITION_PARTITION_LIST)),) |
| INSTALLED_SUPERIMAGE_DEPENDENCIES += $(INSTALLED_SYSTEMOTHERIMAGE_TARGET) |
| endif |
| endif |
| |
| # If BOARD_BUILD_SUPER_IMAGE_BY_DEFAULT is set, super.img is built from images in the |
| # $(PRODUCT_OUT) directory, and is built to $(PRODUCT_OUT)/super.img. Also, it will |
| # be built for non-dist builds. This is useful for devices that uses super.img directly, e.g. |
| # virtual devices. |
| ifeq (true,$(BOARD_BUILD_SUPER_IMAGE_BY_DEFAULT)) |
| $(INSTALLED_SUPERIMAGE_TARGET): $(INSTALLED_SUPERIMAGE_DEPENDENCIES) |
| $(call pretty,"Target super fs image for debug: $@") |
| $(call build-superimage-target,$(INSTALLED_SUPERIMAGE_TARGET),\ |
| $(call intermediates-dir-for,PACKAGING,superimage_debug)/misc_info.txt) |
| |
| droidcore: $(INSTALLED_SUPERIMAGE_TARGET) |
| |
| # For devices that uses super image directly, the superimage target points to the file in $(PRODUCT_OUT). |
| .PHONY: superimage |
| superimage: $(INSTALLED_SUPERIMAGE_TARGET) |
| |
| $(call dist-for-goals,dist_files,$(INSTALLED_MISC_INFO_TARGET):super_misc_info.txt) |
| endif # BOARD_BUILD_SUPER_IMAGE_BY_DEFAULT |
| |
| # Build $(PRODUCT_OUT)/super.img without dependencies. |
| .PHONY: superimage-nodeps supernod |
| superimage-nodeps supernod: intermediates := |
| superimage-nodeps supernod: | $(INSTALLED_SUPERIMAGE_DEPENDENCIES) |
| $(call pretty,"make $(INSTALLED_SUPERIMAGE_TARGET): ignoring dependencies") |
| $(call build-superimage-target,$(INSTALLED_SUPERIMAGE_TARGET),\ |
| $(call intermediates-dir-for,PACKAGING,superimage-nodeps)/misc_info.txt) |
| |
| endif # PRODUCT_RETROFIT_DYNAMIC_PARTITIONS != "true" |
| endif # BOARD_SUPER_PARTITION_SIZE != "" |
| endif # PRODUCT_BUILD_SUPER_PARTITION == "true" |
| |
| # ----------------------------------------------------------------- |
| # super empty image |
| |
| ifeq (true,$(PRODUCT_USE_DYNAMIC_PARTITIONS)) |
| ifneq ($(BOARD_SUPER_PARTITION_SIZE),) |
| |
| INSTALLED_SUPERIMAGE_EMPTY_TARGET := $(PRODUCT_OUT)/super_empty.img |
| $(INSTALLED_SUPERIMAGE_EMPTY_TARGET): intermediates := $(call intermediates-dir-for,PACKAGING,super_empty) |
| $(INSTALLED_SUPERIMAGE_EMPTY_TARGET): $(LPMAKE) $(BUILD_SUPER_IMAGE) |
| $(call pretty,"Target empty super fs image: $@") |
| mkdir -p $(intermediates) |
| rm -rf $(intermediates)/misc_info.txt |
| $(call dump-super-image-info,$(intermediates)/misc_info.txt) |
| PATH=$(dir $(LPMAKE)):$$PATH \ |
| $(BUILD_SUPER_IMAGE) -v $(intermediates)/misc_info.txt $@ |
| |
| $(call dist-for-goals,dist_files,$(INSTALLED_SUPERIMAGE_EMPTY_TARGET)) |
| |
| endif # BOARD_SUPER_PARTITION_SIZE != "" |
| endif # PRODUCT_USE_DYNAMIC_PARTITIONS == "true" |
| |
| |
| # ----------------------------------------------------------------- |
| # The update package |
| |
| name := $(TARGET_PRODUCT) |
| ifeq ($(TARGET_BUILD_TYPE),debug) |
| name := $(name)_debug |
| endif |
| name := $(name)-img-$(FILE_NAME_TAG) |
| |
| INTERNAL_UPDATE_PACKAGE_TARGET := $(PRODUCT_OUT)/$(name).zip |
| |
| $(INTERNAL_UPDATE_PACKAGE_TARGET): $(BUILT_TARGET_FILES_PACKAGE) $(IMG_FROM_TARGET_FILES) |
| $(call pretty,"Package: $@") |
| PATH=$(INTERNAL_USERIMAGES_BINARY_PATHS):$(dir $(ZIP2ZIP)):$$PATH \ |
| $(IMG_FROM_TARGET_FILES) \ |
| --additional IMAGES/VerifiedBootParams.textproto:VerifiedBootParams.textproto \ |
| $(BUILT_TARGET_FILES_PACKAGE) $@ |
| |
| .PHONY: updatepackage |
| updatepackage: $(INTERNAL_UPDATE_PACKAGE_TARGET) |
| $(call dist-for-goals,updatepackage,$(INTERNAL_UPDATE_PACKAGE_TARGET)) |
| |
| |
| # ----------------------------------------------------------------- |
| # dalvik something |
| .PHONY: dalvikfiles |
| dalvikfiles: $(INTERNAL_DALVIK_MODULES) |
| |
| ifeq ($(BUILD_QEMU_IMAGES),true) |
| MK_QEMU_IMAGE_SH := device/generic/goldfish/tools/mk_qemu_image.sh |
| MK_COMBINE_QEMU_IMAGE := $(HOST_OUT_EXECUTABLES)/mk_combined_img |
| SGDISK_HOST := $(HOST_OUT_EXECUTABLES)/sgdisk |
| |
| ifdef INSTALLED_SYSTEMIMAGE_TARGET |
| INSTALLED_QEMU_SYSTEMIMAGE := $(PRODUCT_OUT)/system-qemu.img |
| INSTALLED_SYSTEM_QEMU_CONFIG := $(PRODUCT_OUT)/system-qemu-config.txt |
| $(INSTALLED_SYSTEM_QEMU_CONFIG): $(INSTALLED_SUPERIMAGE_TARGET) $(INSTALLED_VBMETAIMAGE_TARGET) |
| @echo "$(PRODUCT_OUT)/vbmeta.img vbmeta 1" > $@ |
| @echo "$(INSTALLED_SUPERIMAGE_TARGET) super 2" >> $@ |
| $(INSTALLED_QEMU_SYSTEMIMAGE): $(INSTALLED_VBMETAIMAGE_TARGET) $(MK_COMBINE_QEMU_IMAGE) $(SGDISK_HOST) $(SIMG2IMG) \ |
| $(INSTALLED_SUPERIMAGE_TARGET) $(INSTALLED_SYSTEM_QEMU_CONFIG) |
| @echo Create system-qemu.img now |
| (export SGDISK=$(SGDISK_HOST) SIMG2IMG=$(SIMG2IMG); \ |
| $(MK_COMBINE_QEMU_IMAGE) -i $(INSTALLED_SYSTEM_QEMU_CONFIG) -o $@) |
| |
| systemimage: $(INSTALLED_QEMU_SYSTEMIMAGE) |
| droidcore: $(INSTALLED_QEMU_SYSTEMIMAGE) |
| endif |
| ifdef INSTALLED_VENDORIMAGE_TARGET |
| INSTALLED_QEMU_VENDORIMAGE := $(PRODUCT_OUT)/vendor-qemu.img |
| $(INSTALLED_QEMU_VENDORIMAGE): $(INSTALLED_VENDORIMAGE_TARGET) $(MK_QEMU_IMAGE_SH) $(SGDISK_HOST) $(SIMG2IMG) |
| @echo Create vendor-qemu.img |
| (export SGDISK=$(SGDISK_HOST) SIMG2IMG=$(SIMG2IMG); $(MK_QEMU_IMAGE_SH) $(INSTALLED_VENDORIMAGE_TARGET)) |
| |
| vendorimage: $(INSTALLED_QEMU_VENDORIMAGE) |
| droidcore: $(INSTALLED_QEMU_VENDORIMAGE) |
| endif |
| ifdef INSTALLED_PRODUCTIMAGE_TARGET |
| INSTALLED_QEMU_PRODUCTIMAGE := $(PRODUCT_OUT)/product-qemu.img |
| $(INSTALLED_QEMU_PRODUCTIMAGE): $(INSTALLED_PRODUCTIMAGE_TARGET) $(MK_QEMU_IMAGE_SH) $(SGDISK_HOST) $(SIMG2IMG) |
| @echo Create product-qemu.img |
| (export SGDISK=$(SGDISK_HOST) SIMG2IMG=$(SIMG2IMG); $(MK_QEMU_IMAGE_SH) $(INSTALLED_PRODUCTIMAGE_TARGET)) |
| |
| productimage: $(INSTALLED_QEMU_PRODUCTIMAGE) |
| droidcore: $(INSTALLED_QEMU_PRODUCTIMAGE) |
| endif |
| ifdef INSTALLED_SYSTEM_EXTIMAGE_TARGET |
| INSTALLED_QEMU_SYSTEM_EXTIMAGE := $(PRODUCT_OUT)/system_ext-qemu.img |
| $(INSTALLED_QEMU_SYSTEM_EXTIMAGE): $(INSTALLED_SYSTEM_EXTIMAGE_TARGET) $(MK_QEMU_IMAGE_SH) $(SGDISK_HOST) $(SIMG2IMG) |
| @echo Create system_ext-qemu.img |
| (export SGDISK=$(SGDISK_HOST) SIMG2IMG=$(SIMG2IMG); $(MK_QEMU_IMAGE_SH) $(INSTALLED_SYSTEM_EXTIMAGE_TARGET)) |
| |
| systemextimage: $(INSTALLED_QEMU_SYSTEM_EXTIMAGE) |
| droidcore: $(INSTALLED_QEMU_SYSTEM_EXTIMAGE) |
| endif |
| ifdef INSTALLED_ODMIMAGE_TARGET |
| INSTALLED_QEMU_ODMIMAGE := $(PRODUCT_OUT)/odm-qemu.img |
| $(INSTALLED_QEMU_ODMIMAGE): $(INSTALLED_ODMIMAGE_TARGET) $(MK_QEMU_IMAGE_SH) $(SGDISK_HOST) |
| @echo Create odm-qemu.img |
| (export SGDISK=$(SGDISK_HOST); $(MK_QEMU_IMAGE_SH) $(INSTALLED_ODMIMAGE_TARGET)) |
| |
| odmimage: $(INSTALLED_QEMU_ODMIMAGE) |
| droidcore: $(INSTALLED_QEMU_ODMIMAGE) |
| endif |
| |
| QEMU_VERIFIED_BOOT_PARAMS := $(PRODUCT_OUT)/VerifiedBootParams.textproto |
| $(QEMU_VERIFIED_BOOT_PARAMS): $(INSTALLED_VBMETAIMAGE_TARGET) $(INSTALLED_SYSTEMIMAGE_TARGET) \ |
| $(MK_VBMETA_BOOT_KERNEL_CMDLINE_SH) $(AVBTOOL) |
| @echo Creating $@ |
| (export AVBTOOL=$(AVBTOOL); $(MK_VBMETA_BOOT_KERNEL_CMDLINE_SH) $(INSTALLED_VBMETAIMAGE_TARGET) \ |
| $(INSTALLED_SYSTEMIMAGE_TARGET) $(QEMU_VERIFIED_BOOT_PARAMS)) |
| |
| systemimage: $(QEMU_VERIFIED_BOOT_PARAMS) |
| droidcore: $(QEMU_VERIFIED_BOOT_PARAMS) |
| |
| endif |
| # ----------------------------------------------------------------- |
| # The emulator package |
| ifeq ($(BUILD_EMULATOR),true) |
| INTERNAL_EMULATOR_PACKAGE_FILES += \ |
| $(HOST_OUT_EXECUTABLES)/emulator$(HOST_EXECUTABLE_SUFFIX) \ |
| prebuilts/qemu-kernel/$(TARGET_ARCH)/kernel-qemu \ |
| $(INSTALLED_RAMDISK_TARGET) \ |
| $(INSTALLED_SYSTEMIMAGE_TARGET) \ |
| $(INSTALLED_USERDATAIMAGE_TARGET) |
| |
| name := $(TARGET_PRODUCT)-emulator-$(FILE_NAME_TAG) |
| |
| INTERNAL_EMULATOR_PACKAGE_TARGET := $(PRODUCT_OUT)/$(name).zip |
| |
| $(INTERNAL_EMULATOR_PACKAGE_TARGET): $(INTERNAL_EMULATOR_PACKAGE_FILES) |
| @echo "Package: $@" |
| $(hide) zip -qjX $@ $(INTERNAL_EMULATOR_PACKAGE_FILES) |
| |
| endif |
| # ----------------------------------------------------------------- |
| # Old PDK stuffs, retired |
| # The pdk package (Platform Development Kit) |
| |
| #ifneq (,$(filter pdk,$(MAKECMDGOALS))) |
| # include development/pdk/Pdk.mk |
| #endif |
| |
| |
| # ----------------------------------------------------------------- |
| # The SDK |
| |
| # The SDK includes host-specific components, so it belongs under HOST_OUT. |
| sdk_dir := $(HOST_OUT)/sdk/$(TARGET_PRODUCT) |
| |
| # Build a name that looks like: |
| # |
| # linux-x86 --> android-sdk_12345_linux-x86 |
| # darwin-x86 --> android-sdk_12345_mac-x86 |
| # windows-x86 --> android-sdk_12345_windows |
| # |
| sdk_name := android-sdk_$(FILE_NAME_TAG) |
| ifeq ($(HOST_OS),darwin) |
| INTERNAL_SDK_HOST_OS_NAME := mac |
| else |
| INTERNAL_SDK_HOST_OS_NAME := $(HOST_OS) |
| endif |
| ifneq ($(HOST_OS),windows) |
| INTERNAL_SDK_HOST_OS_NAME := $(INTERNAL_SDK_HOST_OS_NAME)-$(SDK_HOST_ARCH) |
| endif |
| sdk_name := $(sdk_name)_$(INTERNAL_SDK_HOST_OS_NAME) |
| |
| sdk_dep_file := $(sdk_dir)/sdk_deps.mk |
| |
| ATREE_FILES := |
| -include $(sdk_dep_file) |
| |
| # if we don't have a real list, then use "everything" |
| ifeq ($(strip $(ATREE_FILES)),) |
| ATREE_FILES := \ |
| $(ALL_DEFAULT_INSTALLED_MODULES) \ |
| $(INSTALLED_RAMDISK_TARGET) \ |
| $(ALL_DOCS) \ |
| $(ALL_SDK_FILES) |
| endif |
| |
| atree_dir := development/build |
| |
| |
| sdk_atree_files := \ |
| $(atree_dir)/sdk.exclude.atree \ |
| $(atree_dir)/sdk-$(HOST_OS)-$(SDK_HOST_ARCH).atree |
| |
| # development/build/sdk-android-<abi>.atree is used to differentiate |
| # between architecture models (e.g. ARMv5TE versus ARMv7) when copying |
| # files like the kernel image. We use TARGET_CPU_ABI because we don't |
| # have a better way to distinguish between CPU models. |
| ifneq (,$(strip $(wildcard $(atree_dir)/sdk-android-$(TARGET_CPU_ABI).atree))) |
| sdk_atree_files += $(atree_dir)/sdk-android-$(TARGET_CPU_ABI).atree |
| endif |
| |
| ifneq ($(PRODUCT_SDK_ATREE_FILES),) |
| sdk_atree_files += $(PRODUCT_SDK_ATREE_FILES) |
| else |
| sdk_atree_files += $(atree_dir)/sdk.atree |
| endif |
| |
| include $(BUILD_SYSTEM)/sdk_font.mk |
| |
| deps := \ |
| $(target_notice_file_txt) \ |
| $(tools_notice_file_txt) \ |
| $(OUT_DOCS)/offline-sdk-timestamp \ |
| $(SDK_METADATA_FILES) \ |
| $(SYMBOLS_ZIP) \ |
| $(COVERAGE_ZIP) \ |
| $(APPCOMPAT_ZIP) \ |
| $(INSTALLED_SYSTEMIMAGE_TARGET) \ |
| $(INSTALLED_QEMU_SYSTEMIMAGE) \ |
| $(INSTALLED_QEMU_VENDORIMAGE) \ |
| $(QEMU_VERIFIED_BOOT_PARAMS) \ |
| $(INSTALLED_USERDATAIMAGE_TARGET) \ |
| $(INSTALLED_RAMDISK_TARGET) \ |
| $(INSTALLED_SDK_BUILD_PROP_TARGET) \ |
| $(INSTALLED_BUILD_PROP_TARGET) \ |
| $(ATREE_FILES) \ |
| $(sdk_atree_files) \ |
| $(HOST_OUT_EXECUTABLES)/atree \ |
| $(HOST_OUT_EXECUTABLES)/line_endings \ |
| $(SDK_FONT_DEPS) |
| |
| INTERNAL_SDK_TARGET := $(sdk_dir)/$(sdk_name).zip |
| $(INTERNAL_SDK_TARGET): PRIVATE_NAME := $(sdk_name) |
| $(INTERNAL_SDK_TARGET): PRIVATE_DIR := $(sdk_dir)/$(sdk_name) |
| $(INTERNAL_SDK_TARGET): PRIVATE_DEP_FILE := $(sdk_dep_file) |
| $(INTERNAL_SDK_TARGET): PRIVATE_INPUT_FILES := $(sdk_atree_files) |
| |
| # Set SDK_GNU_ERROR to non-empty to fail when a GNU target is built. |
| # |
| #SDK_GNU_ERROR := true |
| |
| $(INTERNAL_SDK_TARGET): $(deps) |
| @echo "Package SDK: $@" |
| $(hide) rm -rf $(PRIVATE_DIR) $@ |
| $(hide) for f in $(target_gnu_MODULES); do \ |
| if [ -f $$f ]; then \ |
| echo SDK: $(if $(SDK_GNU_ERROR),ERROR:,warning:) \ |
| including GNU target $$f >&2; \ |
| FAIL=$(SDK_GNU_ERROR); \ |
| fi; \ |
| done; \ |
| if [ $$FAIL ]; then exit 1; fi |
| $(hide) echo $(notdir $(SDK_FONT_DEPS)) | tr " " "\n" > $(SDK_FONT_TEMP)/fontsInSdk.txt |
| $(hide) ( \ |
| ATREE_STRIP="$(HOST_STRIP) -x" \ |
| $(HOST_OUT_EXECUTABLES)/atree \ |
| $(addprefix -f ,$(PRIVATE_INPUT_FILES)) \ |
| -m $(PRIVATE_DEP_FILE) \ |
| -I . \ |
| -I $(PRODUCT_OUT) \ |
| -I $(HOST_OUT) \ |
| -I $(TARGET_COMMON_OUT_ROOT) \ |
| -v "PLATFORM_NAME=android-$(PLATFORM_VERSION)" \ |
| -v "OUT_DIR=$(OUT_DIR)" \ |
| -v "HOST_OUT=$(HOST_OUT)" \ |
| -v "TARGET_ARCH=$(TARGET_ARCH)" \ |
| -v "TARGET_CPU_ABI=$(TARGET_CPU_ABI)" \ |
| -v "DLL_EXTENSION=$(HOST_SHLIB_SUFFIX)" \ |
| -v "FONT_OUT=$(SDK_FONT_TEMP)" \ |
| -o $(PRIVATE_DIR) && \ |
| cp -f $(target_notice_file_txt) \ |
| $(PRIVATE_DIR)/system-images/android-$(PLATFORM_VERSION)/$(TARGET_CPU_ABI)/NOTICE.txt && \ |
| cp -f $(tools_notice_file_txt) $(PRIVATE_DIR)/platform-tools/NOTICE.txt && \ |
| HOST_OUT_EXECUTABLES=$(HOST_OUT_EXECUTABLES) HOST_OS=$(HOST_OS) \ |
| development/build/tools/sdk_clean.sh $(PRIVATE_DIR) && \ |
| chmod -R ug+rwX $(PRIVATE_DIR) && \ |
| cd $(dir $@) && zip -rqX $(notdir $@) $(PRIVATE_NAME) \ |
| ) || ( rm -rf $(PRIVATE_DIR) $@ && exit 44 ) |
| |
| |
| # Is a Windows SDK requested? If so, we need some definitions from here |
| # in order to find the Linux SDK used to create the Windows one. |
| MAIN_SDK_NAME := $(sdk_name) |
| MAIN_SDK_DIR := $(sdk_dir) |
| MAIN_SDK_ZIP := $(INTERNAL_SDK_TARGET) |
| ifneq ($(filter win_sdk winsdk-tools,$(MAKECMDGOALS)),) |
| include $(TOPDIR)development/build/tools/windows_sdk.mk |
| endif |
| |
| # ----------------------------------------------------------------- |
| # Findbugs |
| INTERNAL_FINDBUGS_XML_TARGET := $(PRODUCT_OUT)/findbugs.xml |
| INTERNAL_FINDBUGS_HTML_TARGET := $(PRODUCT_OUT)/findbugs.html |
| $(INTERNAL_FINDBUGS_XML_TARGET): $(ALL_FINDBUGS_FILES) |
| @echo UnionBugs: $@ |
| $(hide) $(FINDBUGS_DIR)/unionBugs $(ALL_FINDBUGS_FILES) \ |
| > $@ |
| $(INTERNAL_FINDBUGS_HTML_TARGET): $(INTERNAL_FINDBUGS_XML_TARGET) |
| @echo ConvertXmlToText: $@ |
| $(hide) $(FINDBUGS_DIR)/convertXmlToText -html:fancy.xsl \ |
| $(INTERNAL_FINDBUGS_XML_TARGET) > $@ |
| |
| # ----------------------------------------------------------------- |
| # Findbugs |
| |
| # ----------------------------------------------------------------- |
| # These are some additional build tasks that need to be run. |
| ifneq ($(dont_bother),true) |
| include $(sort $(wildcard $(BUILD_SYSTEM)/tasks/*.mk)) |
| -include $(sort $(wildcard vendor/*/build/tasks/*.mk)) |
| -include $(sort $(wildcard device/*/build/tasks/*.mk)) |
| -include $(sort $(wildcard product/*/build/tasks/*.mk)) |
| # Also the project-specific tasks |
| -include $(sort $(wildcard vendor/*/*/build/tasks/*.mk)) |
| -include $(sort $(wildcard device/*/*/build/tasks/*.mk)) |
| -include $(sort $(wildcard product/*/*/build/tasks/*.mk)) |
| # Also add test specifc tasks |
| include $(sort $(wildcard platform_testing/build/tasks/*.mk)) |
| include $(sort $(wildcard test/vts/tools/build/tasks/*.mk)) |
| endif |
| |
| include $(BUILD_SYSTEM)/product-graph.mk |
| |
| # ----------------------------------------------------------------- |
| # Create SDK repository packages. Must be done after tasks/* since |
| # we need the addon rules defined. |
| ifneq ($(sdk_repo_goal),) |
| include $(TOPDIR)development/build/tools/sdk_repo.mk |
| endif |
| |
| # ----------------------------------------------------------------- |
| # Soong generates the list of all shared libraries that are depended on by fuzz |
| # targets. It saves this list as a source:destination pair to |
| # FUZZ_TARGET_SHARED_DEPS_INSTALL_PAIRS, where the source is the path to the |
| # build of the unstripped shared library, and the destination is the |
| # /data/fuzz/$ARCH/lib (for device) or /fuzz/$ARCH/lib (for host) directory |
| # where fuzz target shared libraries are to be "reinstalled". The |
| # copy-many-files below generates the rules to copy the unstripped shared |
| # libraries to the device or host "reinstallation" directory. These rules are |
| # depended on by each module in soong_cc_prebuilt.mk, where the module will have |
| # a dependency on each shared library that it needs to be "reinstalled". |
| FUZZ_SHARED_DEPS := $(call copy-many-files,$(strip $(FUZZ_TARGET_SHARED_DEPS_INSTALL_PAIRS))) |
| |
| # ----------------------------------------------------------------- |
| # The rule to build all fuzz targets, and package them. |
| # Note: The packages are created in Soong, and in a perfect world, |
| # we'd be able to create the phony rule there. But, if we want to |
| # have dist goals for the fuzz target, we need to have the PHONY |
| # target defined in make. MakeVarsContext.DistForGoal doesn't take |
| # into account that a PHONY rule create by Soong won't be available |
| # during make, and such will fail with `writing to readonly |
| # directory`, because kati will see 'haiku' as being a file, not a |
| # phony target. |
| .PHONY: haiku |
| haiku: $(SOONG_FUZZ_PACKAGING_ARCH_MODULES) $(ALL_FUZZ_TARGETS) |
| $(call dist-for-goals,haiku,$(SOONG_FUZZ_PACKAGING_ARCH_MODULES)) |
| |
| # ----------------------------------------------------------------- |
| # The makefile for haiku line coverage. |
| include $(BUILD_SYSTEM)/line_coverage.mk |