libc/arch-arm/generic/bionic/memcpy.S

/*
 * Copyright (C) 2008 The Android Open Source Project
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *  * Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 *  * Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
 * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
 * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 */

#include <private/bionic_asm.h>

        /*
         * Optimized memcpy() for ARM.
         *
         * note that memcpy() always returns the destination pointer,
         * so we have to preserve R0.
         */

         .syntax unified

ENTRY(__memcpy_chk)
        cmp         r2, r3
        bls         memcpy

        // Preserve lr for backtrace.
        push        {lr}
        .cfi_def_cfa_offset 4
        .cfi_rel_offset lr, 0

        bl          __memcpy_chk_fail
END(__memcpy_chk)

ENTRY(memcpy)
        /* The stack must always be 64-bits aligned to be compliant with the
         * ARM ABI. Since we have to save R0, we might as well save R4
         * which we can use for better pipelining of the reads below
         */
        stmfd       sp!, {r0, r4, lr}
        .cfi_def_cfa_offset 12
        .cfi_rel_offset r0, 0
        .cfi_rel_offset r4, 4
        .cfi_rel_offset lr, 8
        /* Making room for r5-r11 which will be spilled later */
        sub         sp, sp, #28
        .cfi_adjust_cfa_offset 28

        // preload the destination because we'll align it to a cache line
        // with small writes. Also start the source "pump".
        pld         [r0, #0]
        pld         [r1, #0]
        pld         [r1, #32]

        /* it simplifies things to take care of len<4 early */
        cmp         r2, #4
        blo         .Lcopy_last_3_and_return

        /* compute the offset to align the source
         * offset = (4-(src&3))&3 = -src & 3
         */
        rsb         r3, r1, #0
        ands        r3, r3, #3
        beq         .Lsrc_aligned

        /* align source to 32 bits. We need to insert 2 instructions between
         * a ldr[b|h] and str[b|h] because byte and half-word instructions
         * stall 2 cycles.
         */
        movs        r12, r3, lsl #31
        sub         r2, r2, r3      /* we know that r3 <= r2 because r2 >= 4 */
        ldrbmi      r3, [r1], #1
        ldrbcs      r4, [r1], #1
        ldrbcs      r12,[r1], #1
        strbmi      r3, [r0], #1
        strbcs      r4, [r0], #1
        strbcs      r12,[r0], #1

.Lsrc_aligned:

        /* see if src and dst are aligned together (congruent) */
        eor         r12, r0, r1
        tst         r12, #3
        bne         .Lnon_congruent

        /* Use post-incriment mode for stm to spill r5-r11 to reserved stack
         * frame. Don't update sp.
         */
        stmea       sp, {r5-r11}

        /* align the destination to a cache-line */
        rsb         r3, r0, #0
        ands        r3, r3, #0x1C
        beq         .Lcongruent_aligned32
        cmp         r3, r2
        andhi       r3, r2, #0x1C

        /* conditionally copies 0 to 7 words (length in r3) */
        movs        r12, r3, lsl #28
        ldmcs       r1!, {r4, r5, r6, r7}   /* 16 bytes */
        ldmmi       r1!, {r8, r9}           /*  8 bytes */
        stmcs       r0!, {r4, r5, r6, r7}
        stmmi       r0!, {r8, r9}
        tst         r3, #0x4
        ldrne       r10,[r1], #4            /*  4 bytes */
        strne       r10,[r0], #4
        sub         r2, r2, r3

.Lcongruent_aligned32:
        /*
         * here source is aligned to 32 bytes.
         */

.Lcached_aligned32:
        subs        r2, r2, #32
        blo         .Lless_than_32_left

        /*
         * We preload a cache-line up to 64 bytes ahead. On the 926, this will
         * stall only until the requested world is fetched, but the linefill
         * continues in the the background.
         * While the linefill is going, we write our previous cache-line
         * into the write-buffer (which should have some free space).
         * When the linefill is done, the writebuffer will
         * start dumping its content into memory
         *
         * While all this is going, we then load a full cache line into
         * 8 registers, this cache line should be in the cache by now
         * (or partly in the cache).
         *
         * This code should work well regardless of the source/dest alignment.
         *
         */

        // Align the preload register to a cache-line because the cpu does
        // "critical word first" (the first word requested is loaded first).
        bic         r12, r1, #0x1F
        add         r12, r12, #64

1:      ldmia       r1!, { r4-r11 }
        pld         [r12, #64]
        subs        r2, r2, #32

        // NOTE: if r12 is more than 64 ahead of r1, the following ldrhi
        // for ARM9 preload will not be safely guarded by the preceding subs.
        // When it is safely guarded the only possibility to have SIGSEGV here
        // is because the caller overstates the length.
        ldrhi       r3, [r12], #32      /* cheap ARM9 preload */
        stmia       r0!, { r4-r11 }
        bhs         1b

        add         r2, r2, #32

.Lless_than_32_left:
        /*
         * less than 32 bytes left at this point (length in r2)
         */

        /* skip all this if there is nothing to do, which should
         * be a common case (if not executed the code below takes
         * about 16 cycles)
         */
        tst         r2, #0x1F
        beq         1f

        /* conditionnaly copies 0 to 31 bytes */
        movs        r12, r2, lsl #28
        ldmcs       r1!, {r4, r5, r6, r7}   /* 16 bytes */
        ldmmi       r1!, {r8, r9}           /*  8 bytes */
        stmcs       r0!, {r4, r5, r6, r7}
        stmmi       r0!, {r8, r9}
        movs        r12, r2, lsl #30
        ldrcs       r3, [r1], #4            /*  4 bytes */
        ldrhmi      r4, [r1], #2            /*  2 bytes */
        strcs       r3, [r0], #4
        strhmi      r4, [r0], #2
        tst         r2, #0x1
        ldrbne      r3, [r1]                /*  last byte  */
        strbne      r3, [r0]

        /* we're done! restore everything and return */
1:      ldmfd       sp!, {r5-r11}
        ldmfd       sp!, {r0, r4, pc}

        /********************************************************************/

.Lnon_congruent:
        /*
         * here source is aligned to 4 bytes
         * but destination is not.
         *
         * in the code below r2 is the number of bytes read
         * (the number of bytes written is always smaller, because we have
         * partial words in the shift queue)
         */
        cmp         r2, #4
        blo         .Lcopy_last_3_and_return

        /* Use post-increment mode for stm to spill r5-r11 to reserved stack
         * frame. Don't update sp.
         */
        stmea       sp, {r5-r11}

        /* compute shifts needed to align src to dest */
        rsb         r5, r0, #0
        and         r5, r5, #3          /* r5 = # bytes in partial words */
        mov         r12, r5, lsl #3     /* r12 = right */
        rsb         lr, r12, #32        /* lr = left  */

        /* read the first word */
        ldr         r3, [r1], #4
        sub         r2, r2, #4

        /* write a partial word (0 to 3 bytes), such that destination
         * becomes aligned to 32 bits (r5 = nb of words to copy for alignment)
         */
        movs        r5, r5, lsl #31
        strbmi      r3, [r0], #1
        movmi       r3, r3, lsr #8
        strbcs      r3, [r0], #1
        movcs       r3, r3, lsr #8
        strbcs      r3, [r0], #1
        movcs       r3, r3, lsr #8

        cmp         r2, #4
        blo         .Lpartial_word_tail

        /* Align destination to 32 bytes (cache line boundary) */
1:      tst         r0, #0x1c
        beq         2f
        ldr         r5, [r1], #4
        sub         r2, r2, #4
        orr         r4, r3, r5,     lsl lr
        mov         r3, r5,         lsr r12
        str         r4, [r0], #4
        cmp         r2, #4
        bhs         1b
        blo         .Lpartial_word_tail

        /* copy 32 bytes at a time */
2:      subs        r2, r2, #32
        blo         .Lless_than_thirtytwo

        /* Use immediate mode for the shifts, because there is an extra cycle
         * for register shifts, which could account for up to 50% of
         * performance hit.
         */

        cmp         r12, #24
        beq         .Lloop24
        cmp         r12, #8
        beq         .Lloop8

.Lloop16:
        ldr         r12, [r1], #4
1:      mov         r4, r12
        ldmia       r1!, {   r5,r6,r7,  r8,r9,r10,r11}
        pld         [r1, #64]
        subs        r2, r2, #32
        ldrhs       r12, [r1], #4
        orr         r3, r3, r4,     lsl #16
        mov         r4, r4,         lsr #16
        orr         r4, r4, r5,     lsl #16
        mov         r5, r5,         lsr #16
        orr         r5, r5, r6,     lsl #16
        mov         r6, r6,         lsr #16
        orr         r6, r6, r7,     lsl #16
        mov         r7, r7,         lsr #16
        orr         r7, r7, r8,     lsl #16
        mov         r8, r8,         lsr #16
        orr         r8, r8, r9,     lsl #16
        mov         r9, r9,         lsr #16
        orr         r9, r9, r10,    lsl #16
        mov         r10, r10,       lsr #16
        orr         r10, r10, r11,  lsl #16
        stmia       r0!, {r3,r4,r5,r6, r7,r8,r9,r10}
        mov         r3, r11,        lsr #16
        bhs         1b
        b           .Lless_than_thirtytwo

.Lloop8:
        ldr         r12, [r1], #4
1:      mov         r4, r12
        ldmia       r1!, {   r5,r6,r7,  r8,r9,r10,r11}
        pld         [r1, #64]
        subs        r2, r2, #32
        ldrhs       r12, [r1], #4
        orr         r3, r3, r4,     lsl #24
        mov         r4, r4,         lsr #8
        orr         r4, r4, r5,     lsl #24
        mov         r5, r5,         lsr #8
        orr         r5, r5, r6,     lsl #24
        mov         r6, r6,         lsr #8
        orr         r6, r6, r7,     lsl #24
        mov         r7, r7,         lsr #8
        orr         r7, r7, r8,     lsl #24
        mov         r8, r8,         lsr #8
        orr         r8, r8, r9,     lsl #24
        mov         r9, r9,         lsr #8
        orr         r9, r9, r10,    lsl #24
        mov         r10, r10,       lsr #8
        orr         r10, r10, r11,  lsl #24
        stmia       r0!, {r3,r4,r5,r6, r7,r8,r9,r10}
        mov         r3, r11,        lsr #8
        bhs         1b
        b           .Lless_than_thirtytwo

.Lloop24:
        ldr         r12, [r1], #4
1:      mov         r4, r12
        ldmia       r1!, {   r5,r6,r7,  r8,r9,r10,r11}
        pld         [r1, #64]
        subs        r2, r2, #32
        ldrhs       r12, [r1], #4
        orr         r3, r3, r4,     lsl #8
        mov         r4, r4,         lsr #24
        orr         r4, r4, r5,     lsl #8
        mov         r5, r5,         lsr #24
        orr         r5, r5, r6,     lsl #8
        mov         r6, r6,         lsr #24
        orr         r6, r6, r7,     lsl #8
        mov         r7, r7,         lsr #24
        orr         r7, r7, r8,     lsl #8
        mov         r8, r8,         lsr #24
        orr         r8, r8, r9,     lsl #8
        mov         r9, r9,         lsr #24
        orr         r9, r9, r10,    lsl #8
        mov         r10, r10,       lsr #24
        orr         r10, r10, r11,  lsl #8
        stmia       r0!, {r3,r4,r5,r6, r7,r8,r9,r10}
        mov         r3, r11,        lsr #24
        bhs         1b


.Lless_than_thirtytwo:
        /* copy the last 0 to 31 bytes of the source */
        rsb         r12, lr, #32        /* we corrupted r12, recompute it  */
        add         r2, r2, #32
        cmp         r2, #4
        blo         .Lpartial_word_tail

1:      ldr         r5, [r1], #4
        sub         r2, r2, #4
        orr         r4, r3, r5,     lsl lr
        mov         r3, r5,         lsr r12
        str         r4, [r0], #4
        cmp         r2, #4
        bhs         1b

.Lpartial_word_tail:
        /* we have a partial word in the input buffer */
        movs        r5, lr, lsl #(31-3)
        strbmi      r3, [r0], #1
        movmi       r3, r3, lsr #8
        strbcs      r3, [r0], #1
        movcs       r3, r3, lsr #8
        strbcs      r3, [r0], #1

        /* Refill spilled registers from the stack. Don't update sp. */
        ldmfd       sp, {r5-r11}

.Lcopy_last_3_and_return:
        movs        r2, r2, lsl #31 /* copy remaining 0, 1, 2 or 3 bytes */
        ldrbmi      r2, [r1], #1
        ldrbcs      r3, [r1], #1
        ldrbcs      r12,[r1]
        strbmi      r2, [r0], #1
        strbcs      r3, [r0], #1
        strbcs      r12,[r0]

        /* we're done! restore sp and spilled registers and return */
        add         sp,  sp, #28
        ldmfd       sp!, {r0, r4, pc}
END(memcpy)