libc/include/sysexits.h - android_bionic - Gitiles

 /*	$OpenBSD: sysexits.h,v 1.5 2003/06/02 19:34:12 millert Exp $	*/
 /*	$NetBSD: sysexits.h,v 1.4 1994/10/26 00:56:33 cgd Exp $	*/

 /*
  * Copyright (c) 1987 Regents of the University of California.
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions
  * are met:
  * 1. Redistributions of source code must retain the above copyright
  *    notice, this list of conditions and the following disclaimer.
  * 2. Redistributions in binary form must reproduce the above copyright
  *    notice, this list of conditions and the following disclaimer in the
  *    documentation and/or other materials provided with the distribution.
  * 3. Neither the name of the University nor the names of its contributors
  *    may be used to endorse or promote products derived from this software
  *    without specific prior written permission.
  *
  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
  * SUCH DAMAGE.
  *
  *	@(#)sysexits.h	4.8 (Berkeley) 4/3/91
  */

 #pragma once

 /**
  * @file sysexits.h
  * @brief Exit status codes for system programs.
  *
  * This include file attempts to categorize possible error
  * exit statuses for system programs such as sendmail.
  */

 #include <sys/cdefs.h>

 /** Successful termination. */
 #define EX_OK  0

 /**
  * Base value for error messages.
  * Error numbers begin at `EX__BASE` to reduce the possibility of
  * clashing with other exit statuses that random programs may
  * already return.
  */
 #define EX__BASE 64

 /**
  * Command line usage error.
  * The command was used incorrectly, such as the wrong number of
  * arguments, a bad flag, or bad syntax for a parameter.
  */
 #define EX_USAGE 64

 /**
  * Data format error.
  * The input data was incorrect in some way.
  * This should only be used for user's data and not for system files.
  */
 #define EX_DATAERR 65

 /**
  * Cannot open input.
  * An input file (not a system file) did not exist or was not readable.
  * This could also include errors like "No message" to a mailer (if it cared
  * to catch it).
  */
 #define EX_NOINPUT 66

 /**
  * The specified user did not exist.
  * This might be used for mail addresses or remote logins.
  */
 #define EX_NOUSER 67

 /**
  * The specified host did not exist.
  * This is used in mail addresses or network requests.
  */
 #define EX_NOHOST 68

 /**
  * A service is unavailable.
  * This can occur if a support program or file does not exist.
  * This can also be used as a catchall message when something
  * you wanted to do doesn't work, but you don't know why.
  */
 #define EX_UNAVAILABLE 69

 /**
  * An internal software error has been detected.
  * This should be limited to non-operating system related errors.
  */
 #define EX_SOFTWARE 70

 /**
  * An operating system error has been detected.
  * This is intended to be used for such things as "cannot
  * fork", "cannot create pipe", or the like.  It includes
  * things like getuid returning a user that does not
  * exist in the passwd file.
  */
 #define EX_OSERR 71

 /**
  * Critical OS file error.
  * A system file (such as /etc/passwd) does not exist, cannot be opened,
  * or has some other problem (such as a syntax error).
  */
 #define EX_OSFILE 72

 /**
  * Can't create (user) output file.
  * A (user specified) output file cannot be created.
  */
 #define EX_CANTCREAT 73

 /**
  * Input/output error.
  * An error occurred while doing I/O on some file.
  */
 #define EX_IOERR 74

 /**
  * Temporary failure; user is invited to retry.
  * A temporary failure, indicating something that
  * is not really an error.  In sendmail, this might mean
  * that a mailer could not create a connection,
  * and the request should be reattempted later.
  */
 #define EX_TEMPFAIL 75

 /**
  * Remote error in protocol.
  * The remote system returned something that
  * was "not possible" during a protocol exchange.
  */
 #define EX_PROTOCOL 76

 /**
  * Permission denied.
  * You did not have sufficient permission to perform the operation.
  * This is not intended for file system problems, which should use EX_NOINPUT or
  * EX_CANTCREAT, but rather for higher level permissions.
  */
 #define EX_NOPERM 77

 /**
  * Configuration error.
  * Something was found in an unconfigured or misconfigured state.
  */
 #define EX_CONFIG 78

 /** Maximum listed value. */
 #define EX__MAX  78
	/* $OpenBSD: sysexits.h,v 1.5 2003/06/02 19:34:12 millert Exp $ */
	/* $NetBSD: sysexits.h,v 1.4 1994/10/26 00:56:33 cgd Exp $ */

	/*
	* Copyright (c) 1987 Regents of the University of California.
	* All rights reserved.
	*
	* Redistribution and use in source and binary forms, with or without
	* modification, are permitted provided that the following conditions
	* are met:
	* 1. Redistributions of source code must retain the above copyright
	* notice, this list of conditions and the following disclaimer.
	* 2. Redistributions in binary form must reproduce the above copyright
	* notice, this list of conditions and the following disclaimer in the
	* documentation and/or other materials provided with the distribution.
	* 3. Neither the name of the University nor the names of its contributors
	* may be used to endorse or promote products derived from this software
	* without specific prior written permission.
	*
	* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
	* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
	* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
	* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
	* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
	* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
	* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
	* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
	* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
	* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
	* SUCH DAMAGE.
	*
	* @(#)sysexits.h 4.8 (Berkeley) 4/3/91
	*/

	#pragma once

	/**
	* @file sysexits.h
	* @brief Exit status codes for system programs.
	*
	* This include file attempts to categorize possible error
	* exit statuses for system programs such as sendmail.
	*/

	#include <sys/cdefs.h>

	/** Successful termination. */
	#define EX_OK 0

	/**
	* Base value for error messages.
	* Error numbers begin at `EX__BASE` to reduce the possibility of
	* clashing with other exit statuses that random programs may
	* already return.
	*/
	#define EX__BASE 64

	/**
	* Command line usage error.
	* The command was used incorrectly, such as the wrong number of
	* arguments, a bad flag, or bad syntax for a parameter.
	*/
	#define EX_USAGE 64

	/**
	* Data format error.
	* The input data was incorrect in some way.
	* This should only be used for user's data and not for system files.
	*/
	#define EX_DATAERR 65

	/**
	* Cannot open input.
	* An input file (not a system file) did not exist or was not readable.
	* This could also include errors like "No message" to a mailer (if it cared
	* to catch it).
	*/
	#define EX_NOINPUT 66

	/**
	* The specified user did not exist.
	* This might be used for mail addresses or remote logins.
	*/
	#define EX_NOUSER 67

	/**
	* The specified host did not exist.
	* This is used in mail addresses or network requests.
	*/
	#define EX_NOHOST 68

	/**
	* A service is unavailable.
	* This can occur if a support program or file does not exist.
	* This can also be used as a catchall message when something
	* you wanted to do doesn't work, but you don't know why.
	*/
	#define EX_UNAVAILABLE 69

	/**
	* An internal software error has been detected.
	* This should be limited to non-operating system related errors.
	*/
	#define EX_SOFTWARE 70

	/**
	* An operating system error has been detected.
	* This is intended to be used for such things as "cannot
	* fork", "cannot create pipe", or the like. It includes
	* things like getuid returning a user that does not
	* exist in the passwd file.
	*/
	#define EX_OSERR 71

	/**
	* Critical OS file error.
	* A system file (such as /etc/passwd) does not exist, cannot be opened,
	* or has some other problem (such as a syntax error).
	*/
	#define EX_OSFILE 72

	/**
	* Can't create (user) output file.
	* A (user specified) output file cannot be created.
	*/
	#define EX_CANTCREAT 73

	/**
	* Input/output error.
	* An error occurred while doing I/O on some file.
	*/
	#define EX_IOERR 74

	/**
	* Temporary failure; user is invited to retry.
	* A temporary failure, indicating something that
	* is not really an error. In sendmail, this might mean
	* that a mailer could not create a connection,
	* and the request should be reattempted later.
	*/
	#define EX_TEMPFAIL 75

	/**
	* Remote error in protocol.
	* The remote system returned something that
	* was "not possible" during a protocol exchange.
	*/
	#define EX_PROTOCOL 76

	/**
	* Permission denied.
	* You did not have sufficient permission to perform the operation.
	* This is not intended for file system problems, which should use EX_NOINPUT or
	* EX_CANTCREAT, but rather for higher level permissions.
	*/
	#define EX_NOPERM 77

	/**
	* Configuration error.
	* Something was found in an unconfigured or misconfigured state.
	*/
	#define EX_CONFIG 78

	/** Maximum listed value. */
	#define EX__MAX 78