|  | /* | 
|  | * Copyright (C) 2019 The Android Open Source Project | 
|  | * All rights reserved. | 
|  | * | 
|  | * Redistribution and use in source and binary forms, with or without | 
|  | * modification, are permitted provided that the following conditions | 
|  | * are met: | 
|  | *  * Redistributions of source code must retain the above copyright | 
|  | *    notice, this list of conditions and the following disclaimer. | 
|  | *  * Redistributions in binary form must reproduce the above copyright | 
|  | *    notice, this list of conditions and the following disclaimer in | 
|  | *    the documentation and/or other materials provided with the | 
|  | *    distribution. | 
|  | * | 
|  | * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS | 
|  | * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT | 
|  | * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS | 
|  | * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE | 
|  | * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, | 
|  | * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, | 
|  | * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS | 
|  | * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED | 
|  | * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, | 
|  | * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT | 
|  | * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF | 
|  | * SUCH DAMAGE. | 
|  | */ | 
|  |  | 
|  | #include <inttypes.h> | 
|  | #include <pthread.h> | 
|  | #include <stdatomic.h> | 
|  | #include <stdint.h> | 
|  | #include <stdio.h> | 
|  |  | 
|  | #include <private/bionic_malloc_dispatch.h> | 
|  |  | 
|  | #if __has_feature(hwaddress_sanitizer) | 
|  | #include <sanitizer/allocator_interface.h> | 
|  | #endif | 
|  |  | 
|  | #include "malloc_common.h" | 
|  | #include "malloc_common_dynamic.h" | 
|  | #include "malloc_heapprofd.h" | 
|  | #include "malloc_limit.h" | 
|  |  | 
|  | __BEGIN_DECLS | 
|  | static void* LimitCalloc(size_t n_elements, size_t elem_size); | 
|  | static void LimitFree(void* mem); | 
|  | static void* LimitMalloc(size_t bytes); | 
|  | static void* LimitMemalign(size_t alignment, size_t bytes); | 
|  | static int LimitPosixMemalign(void** memptr, size_t alignment, size_t size); | 
|  | static void* LimitRealloc(void* old_mem, size_t bytes); | 
|  | static void* LimitAlignedAlloc(size_t alignment, size_t size); | 
|  | #if defined(HAVE_DEPRECATED_MALLOC_FUNCS) | 
|  | static void* LimitPvalloc(size_t bytes); | 
|  | static void* LimitValloc(size_t bytes); | 
|  | #endif | 
|  |  | 
|  | // Pass through functions. | 
|  | static size_t LimitUsableSize(const void* mem); | 
|  | static struct mallinfo LimitMallinfo(); | 
|  | static int LimitIterate(uintptr_t base, size_t size, void (*callback)(uintptr_t, size_t, void*), void* arg); | 
|  | static void LimitMallocDisable(); | 
|  | static void LimitMallocEnable(); | 
|  | static int LimitMallocInfo(int options, FILE* fp); | 
|  | static int LimitMallopt(int param, int value); | 
|  | __END_DECLS | 
|  |  | 
|  | static constexpr MallocDispatch __limit_dispatch | 
|  | __attribute__((unused)) = { | 
|  | LimitCalloc, | 
|  | LimitFree, | 
|  | LimitMallinfo, | 
|  | LimitMalloc, | 
|  | LimitUsableSize, | 
|  | LimitMemalign, | 
|  | LimitPosixMemalign, | 
|  | #if defined(HAVE_DEPRECATED_MALLOC_FUNCS) | 
|  | LimitPvalloc, | 
|  | #endif | 
|  | LimitRealloc, | 
|  | #if defined(HAVE_DEPRECATED_MALLOC_FUNCS) | 
|  | LimitValloc, | 
|  | #endif | 
|  | LimitIterate, | 
|  | LimitMallocDisable, | 
|  | LimitMallocEnable, | 
|  | LimitMallopt, | 
|  | LimitAlignedAlloc, | 
|  | LimitMallocInfo, | 
|  | }; | 
|  |  | 
|  | static _Atomic uint64_t gAllocated; | 
|  | static uint64_t gAllocLimit; | 
|  |  | 
|  | static inline bool CheckLimit(size_t bytes) { | 
|  | uint64_t total; | 
|  | if (__predict_false(__builtin_add_overflow( | 
|  | atomic_load_explicit(&gAllocated, memory_order_relaxed), bytes, &total) || | 
|  | total > gAllocLimit)) { | 
|  | return false; | 
|  | } | 
|  | return true; | 
|  | } | 
|  |  | 
|  | static inline void* IncrementLimit(void* mem) { | 
|  | if (__predict_false(mem == nullptr)) { | 
|  | return nullptr; | 
|  | } | 
|  | atomic_fetch_add(&gAllocated, LimitUsableSize(mem)); | 
|  | return mem; | 
|  | } | 
|  |  | 
|  | void* LimitCalloc(size_t n_elements, size_t elem_size) { | 
|  | size_t total; | 
|  | if (__builtin_mul_overflow(n_elements, elem_size, &total) || !CheckLimit(total)) { | 
|  | warning_log("malloc_limit: calloc(%zu, %zu) exceeds limit %" PRId64, n_elements, elem_size, | 
|  | gAllocLimit); | 
|  | return nullptr; | 
|  | } | 
|  | auto dispatch_table = GetDefaultDispatchTable(); | 
|  | if (__predict_false(dispatch_table != nullptr)) { | 
|  | return IncrementLimit(dispatch_table->calloc(n_elements, elem_size)); | 
|  | } | 
|  | return IncrementLimit(Malloc(calloc)(n_elements, elem_size)); | 
|  | } | 
|  |  | 
|  | void LimitFree(void* mem) { | 
|  | atomic_fetch_sub(&gAllocated, LimitUsableSize(mem)); | 
|  | auto dispatch_table = GetDefaultDispatchTable(); | 
|  | if (__predict_false(dispatch_table != nullptr)) { | 
|  | return dispatch_table->free(mem); | 
|  | } | 
|  | return Malloc(free)(mem); | 
|  | } | 
|  |  | 
|  | void* LimitMalloc(size_t bytes) { | 
|  | if (!CheckLimit(bytes)) { | 
|  | warning_log("malloc_limit: malloc(%zu) exceeds limit %" PRId64, bytes, gAllocLimit); | 
|  | return nullptr; | 
|  | } | 
|  | auto dispatch_table = GetDefaultDispatchTable(); | 
|  | if (__predict_false(dispatch_table != nullptr)) { | 
|  | return IncrementLimit(dispatch_table->malloc(bytes)); | 
|  | } | 
|  | return IncrementLimit(Malloc(malloc)(bytes)); | 
|  | } | 
|  |  | 
|  | static void* LimitMemalign(size_t alignment, size_t bytes) { | 
|  | if (!CheckLimit(bytes)) { | 
|  | warning_log("malloc_limit: memalign(%zu, %zu) exceeds limit %" PRId64, alignment, bytes, | 
|  | gAllocLimit); | 
|  | return nullptr; | 
|  | } | 
|  | auto dispatch_table = GetDefaultDispatchTable(); | 
|  | if (__predict_false(dispatch_table != nullptr)) { | 
|  | return IncrementLimit(dispatch_table->memalign(alignment, bytes)); | 
|  | } | 
|  | return IncrementLimit(Malloc(memalign)(alignment, bytes)); | 
|  | } | 
|  |  | 
|  | static int LimitPosixMemalign(void** memptr, size_t alignment, size_t size) { | 
|  | if (!CheckLimit(size)) { | 
|  | warning_log("malloc_limit: posix_memalign(%zu, %zu) exceeds limit %" PRId64, alignment, size, | 
|  | gAllocLimit); | 
|  | return ENOMEM; | 
|  | } | 
|  | int retval; | 
|  | auto dispatch_table = GetDefaultDispatchTable(); | 
|  | if (__predict_false(dispatch_table != nullptr)) { | 
|  | retval = dispatch_table->posix_memalign(memptr, alignment, size); | 
|  | } else { | 
|  | retval = Malloc(posix_memalign)(memptr, alignment, size); | 
|  | } | 
|  | if (__predict_false(retval != 0)) { | 
|  | return retval; | 
|  | } | 
|  | IncrementLimit(*memptr); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void* LimitAlignedAlloc(size_t alignment, size_t size) { | 
|  | if (!CheckLimit(size)) { | 
|  | warning_log("malloc_limit: aligned_alloc(%zu, %zu) exceeds limit %" PRId64, alignment, size, | 
|  | gAllocLimit); | 
|  | return nullptr; | 
|  | } | 
|  | auto dispatch_table = GetDefaultDispatchTable(); | 
|  | if (__predict_false(dispatch_table != nullptr)) { | 
|  | return IncrementLimit(dispatch_table->aligned_alloc(alignment, size)); | 
|  | } | 
|  | return IncrementLimit(Malloc(aligned_alloc)(alignment, size)); | 
|  | } | 
|  |  | 
|  | static void* LimitRealloc(void* old_mem, size_t bytes) { | 
|  | size_t old_usable_size = LimitUsableSize(old_mem); | 
|  | void* new_ptr; | 
|  | // Need to check the size only if the allocation will increase in size. | 
|  | if (bytes > old_usable_size && !CheckLimit(bytes - old_usable_size)) { | 
|  | warning_log("malloc_limit: realloc(%p, %zu) exceeds limit %" PRId64, old_mem, bytes, | 
|  | gAllocLimit); | 
|  | // Free the old pointer. | 
|  | LimitFree(old_mem); | 
|  | return nullptr; | 
|  | } | 
|  |  | 
|  | auto dispatch_table = GetDefaultDispatchTable(); | 
|  | if (__predict_false(dispatch_table != nullptr)) { | 
|  | new_ptr = dispatch_table->realloc(old_mem, bytes); | 
|  | } else { | 
|  | new_ptr = Malloc(realloc)(old_mem, bytes); | 
|  | } | 
|  |  | 
|  | if (__predict_false(new_ptr == nullptr)) { | 
|  | // This acts as if the pointer was freed. | 
|  | atomic_fetch_sub(&gAllocated, old_usable_size); | 
|  | return nullptr; | 
|  | } | 
|  |  | 
|  | size_t new_usable_size = LimitUsableSize(new_ptr); | 
|  | // Assumes that most allocations increase in size, rather than shrink. | 
|  | if (__predict_false(old_usable_size > new_usable_size)) { | 
|  | atomic_fetch_sub(&gAllocated, old_usable_size - new_usable_size); | 
|  | } else { | 
|  | atomic_fetch_add(&gAllocated, new_usable_size - old_usable_size); | 
|  | } | 
|  | return new_ptr; | 
|  | } | 
|  |  | 
|  | #if defined(HAVE_DEPRECATED_MALLOC_FUNCS) | 
|  | static void* LimitPvalloc(size_t bytes) { | 
|  | if (!CheckLimit(bytes)) { | 
|  | warning_log("malloc_limit: pvalloc(%zu) exceeds limit %" PRId64, bytes, gAllocLimit); | 
|  | return nullptr; | 
|  | } | 
|  | auto dispatch_table = GetDefaultDispatchTable(); | 
|  | if (__predict_false(dispatch_table != nullptr)) { | 
|  | return IncrementLimit(dispatch_table->pvalloc(bytes)); | 
|  | } | 
|  | return IncrementLimit(Malloc(pvalloc)(bytes)); | 
|  | } | 
|  |  | 
|  | static void* LimitValloc(size_t bytes) { | 
|  | if (!CheckLimit(bytes)) { | 
|  | warning_log("malloc_limit: valloc(%zu) exceeds limit %" PRId64, bytes, gAllocLimit); | 
|  | return nullptr; | 
|  | } | 
|  | auto dispatch_table = GetDefaultDispatchTable(); | 
|  | if (__predict_false(dispatch_table != nullptr)) { | 
|  | return IncrementLimit(dispatch_table->valloc(bytes)); | 
|  | } | 
|  | return IncrementLimit(Malloc(valloc)(bytes)); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | #if defined(LIBC_STATIC) | 
|  | static bool EnableLimitDispatchTable() { | 
|  | // This is the only valid way to modify the dispatch tables for a | 
|  | // static executable so no locks are necessary. | 
|  | __libc_globals.mutate([](libc_globals* globals) { | 
|  | atomic_store(&globals->current_dispatch_table, &__limit_dispatch); | 
|  | }); | 
|  | return true; | 
|  | } | 
|  | #else | 
|  | static bool EnableLimitDispatchTable() { | 
|  | HeapprofdMaskSignal(); | 
|  | pthread_mutex_lock(&gGlobalsMutateLock); | 
|  | // All other code that calls mutate will grab the gGlobalsMutateLock. | 
|  | // However, there is one case where the lock cannot be acquired, in the | 
|  | // signal handler that enables heapprofd. In order to avoid having two | 
|  | // threads calling mutate at the same time, use an atomic variable to | 
|  | // verify that only this function or the signal handler are calling mutate. | 
|  | // If this function is called at the same time as the signal handler is | 
|  | // being called, allow up to five ms for the signal handler to complete | 
|  | // before failing. | 
|  | bool enabled = false; | 
|  | size_t num_tries = 20; | 
|  | while (true) { | 
|  | if (!atomic_exchange(&gGlobalsMutating, true)) { | 
|  | __libc_globals.mutate([](libc_globals* globals) { | 
|  | atomic_store(&globals->current_dispatch_table, &__limit_dispatch); | 
|  | }); | 
|  | atomic_store(&gGlobalsMutating, false); | 
|  | enabled = true; | 
|  | break; | 
|  | } | 
|  | if (--num_tries == 0) { | 
|  | break; | 
|  | } | 
|  | usleep(1000); | 
|  | } | 
|  | pthread_mutex_unlock(&gGlobalsMutateLock); | 
|  | HeapprofdUnmaskSignal(); | 
|  | if (enabled) { | 
|  | info_log("malloc_limit: Allocation limit enabled, max size %" PRId64 " bytes\n", gAllocLimit); | 
|  | } else { | 
|  | error_log("malloc_limit: Failed to enable allocation limit."); | 
|  | } | 
|  | return enabled; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | bool LimitEnable(void* arg, size_t arg_size) { | 
|  | if (arg == nullptr || arg_size != sizeof(size_t)) { | 
|  | errno = EINVAL; | 
|  | return false; | 
|  | } | 
|  |  | 
|  | static _Atomic bool limit_enabled; | 
|  | if (atomic_exchange(&limit_enabled, true)) { | 
|  | // The limit can only be enabled once. | 
|  | error_log("malloc_limit: The allocation limit has already been set, it can only be set once."); | 
|  | return false; | 
|  | } | 
|  |  | 
|  | gAllocLimit = *reinterpret_cast<size_t*>(arg); | 
|  | #if __has_feature(hwaddress_sanitizer) | 
|  | size_t current_allocated = __sanitizer_get_current_allocated_bytes(); | 
|  | #else | 
|  | size_t current_allocated; | 
|  | auto dispatch_table = GetDefaultDispatchTable(); | 
|  | if (__predict_false(dispatch_table != nullptr)) { | 
|  | current_allocated = dispatch_table->mallinfo().uordblks; | 
|  | } else { | 
|  | current_allocated = Malloc(mallinfo)().uordblks; | 
|  | } | 
|  | #endif | 
|  | atomic_store(&gAllocated, current_allocated); | 
|  |  | 
|  | return EnableLimitDispatchTable(); | 
|  | } | 
|  |  | 
|  | static size_t LimitUsableSize(const void* mem) { | 
|  | auto dispatch_table = GetDefaultDispatchTable(); | 
|  | if (__predict_false(dispatch_table != nullptr)) { | 
|  | return dispatch_table->malloc_usable_size(mem); | 
|  | } | 
|  | return Malloc(malloc_usable_size)(mem); | 
|  | } | 
|  |  | 
|  | static struct mallinfo LimitMallinfo() { | 
|  | auto dispatch_table = GetDefaultDispatchTable(); | 
|  | if (__predict_false(dispatch_table != nullptr)) { | 
|  | return dispatch_table->mallinfo(); | 
|  | } | 
|  | return Malloc(mallinfo)(); | 
|  | } | 
|  |  | 
|  | static int LimitIterate(uintptr_t base, size_t size, void (*callback)(uintptr_t, size_t, void*), void* arg) { | 
|  | auto dispatch_table = GetDefaultDispatchTable(); | 
|  | if (__predict_false(dispatch_table != nullptr)) { | 
|  | return dispatch_table->malloc_iterate(base, size, callback, arg); | 
|  | } | 
|  | return Malloc(malloc_iterate)(base, size, callback, arg); | 
|  | } | 
|  |  | 
|  | static void LimitMallocDisable() { | 
|  | auto dispatch_table = GetDefaultDispatchTable(); | 
|  | if (__predict_false(dispatch_table != nullptr)) { | 
|  | dispatch_table->malloc_disable(); | 
|  | } else { | 
|  | Malloc(malloc_disable)(); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void LimitMallocEnable() { | 
|  | auto dispatch_table = GetDefaultDispatchTable(); | 
|  | if (__predict_false(dispatch_table != nullptr)) { | 
|  | dispatch_table->malloc_enable(); | 
|  | } else { | 
|  | Malloc(malloc_enable)(); | 
|  | } | 
|  | } | 
|  |  | 
|  | static int LimitMallocInfo(int options, FILE* fp) { | 
|  | auto dispatch_table = GetDefaultDispatchTable(); | 
|  | if (__predict_false(dispatch_table != nullptr)) { | 
|  | return dispatch_table->malloc_info(options, fp); | 
|  | } | 
|  | return Malloc(malloc_info)(options, fp); | 
|  | } | 
|  |  | 
|  | static int LimitMallopt(int param, int value) { | 
|  | auto dispatch_table = GetDefaultDispatchTable(); | 
|  | if (__predict_false(dispatch_table != nullptr)) { | 
|  | return dispatch_table->mallopt(param, value); | 
|  | } | 
|  | return Malloc(mallopt)(param, value); | 
|  | } |