|  | /* | 
|  | * Copyright (C) 2008 The Android Open Source Project | 
|  | * All rights reserved. | 
|  | * | 
|  | * Redistribution and use in source and binary forms, with or without | 
|  | * modification, are permitted provided that the following conditions | 
|  | * are met: | 
|  | *  * Redistributions of source code must retain the above copyright | 
|  | *    notice, this list of conditions and the following disclaimer. | 
|  | *  * Redistributions in binary form must reproduce the above copyright | 
|  | *    notice, this list of conditions and the following disclaimer in | 
|  | *    the documentation and/or other materials provided with the | 
|  | *    distribution. | 
|  | * | 
|  | * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS | 
|  | * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT | 
|  | * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS | 
|  | * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE | 
|  | * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, | 
|  | * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, | 
|  | * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS | 
|  | * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED | 
|  | * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, | 
|  | * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT | 
|  | * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF | 
|  | * SUCH DAMAGE. | 
|  | */ | 
|  |  | 
|  | #include "libc_init_common.h" | 
|  |  | 
|  | #include <elf.h> | 
|  | #include <errno.h> | 
|  | #include <fcntl.h> | 
|  | #include <stddef.h> | 
|  | #include <stdint.h> | 
|  | #include <stdio.h> | 
|  | #include <stdlib.h> | 
|  | #include <string.h> | 
|  | #include <sys/auxv.h> | 
|  | #include <sys/personality.h> | 
|  | #include <sys/time.h> | 
|  | #include <unistd.h> | 
|  |  | 
|  | #include "private/bionic_auxv.h" | 
|  | #include "private/bionic_ssp.h" | 
|  | #include "private/bionic_tls.h" | 
|  | #include "private/KernelArgumentBlock.h" | 
|  | #include "private/libc_logging.h" | 
|  | #include "pthread_internal.h" | 
|  |  | 
|  | extern "C" abort_msg_t** __abort_message_ptr; | 
|  | extern "C" int __system_properties_init(void); | 
|  | extern "C" int __set_tls(void* ptr); | 
|  | extern "C" int __set_tid_address(int* tid_address); | 
|  |  | 
|  | __LIBC_HIDDEN__ void __libc_init_vdso(); | 
|  |  | 
|  | // Not public, but well-known in the BSDs. | 
|  | const char* __progname; | 
|  |  | 
|  | // Declared in <unistd.h>. | 
|  | char** environ; | 
|  |  | 
|  | // Declared in "private/bionic_ssp.h". | 
|  | uintptr_t __stack_chk_guard = 0; | 
|  |  | 
|  | // Setup for the main thread. For dynamic executables, this is called by the | 
|  | // linker _before_ libc is mapped in memory. This means that all writes to | 
|  | // globals from this function will apply to linker-private copies and will not | 
|  | // be visible from libc later on. | 
|  | // | 
|  | // Note: this function creates a pthread_internal_t for the initial thread and | 
|  | // stores the pointer in TLS, but does not add it to pthread's thread list. This | 
|  | // has to be done later from libc itself (see __libc_init_common). | 
|  | void __libc_init_main_thread(KernelArgumentBlock& args) { | 
|  | __libc_auxv = args.auxv; | 
|  |  | 
|  | static pthread_internal_t main_thread; | 
|  |  | 
|  | // Tell the kernel to clear our tid field when we exit, so we're like any other pthread. | 
|  | // As a side-effect, this tells us our pid (which is the same as the main thread's tid). | 
|  | main_thread.tid = __set_tid_address(&main_thread.tid); | 
|  | main_thread.set_cached_pid(main_thread.tid); | 
|  |  | 
|  | // We don't want to free the main thread's stack even when the main thread exits | 
|  | // because things like environment variables with global scope live on it. | 
|  | // We also can't free the pthread_internal_t itself, since that lives on the main | 
|  | // thread's stack rather than on the heap. | 
|  | // The main thread has no mmap allocated space for stack or pthread_internal_t. | 
|  | main_thread.mmap_size = 0; | 
|  | pthread_attr_init(&main_thread.attr); | 
|  | main_thread.attr.guard_size = 0; // The main thread has no guard page. | 
|  | main_thread.attr.stack_size = 0; // User code should never see this; we'll compute it when asked. | 
|  | // TODO: the main thread's sched_policy and sched_priority need to be queried. | 
|  |  | 
|  | __init_thread(&main_thread); | 
|  | __init_tls(&main_thread); | 
|  | __set_tls(main_thread.tls); | 
|  |  | 
|  | // Store a pointer to the kernel argument block in a TLS slot to be | 
|  | // picked up by the libc constructor. | 
|  | main_thread.tls[TLS_SLOT_BIONIC_PREINIT] = &args; | 
|  |  | 
|  | __init_alternate_signal_stack(&main_thread); | 
|  | } | 
|  |  | 
|  | void __libc_init_common(KernelArgumentBlock& args) { | 
|  | // Initialize various globals. | 
|  | environ = args.envp; | 
|  | errno = 0; | 
|  | __libc_auxv = args.auxv; | 
|  | __progname = args.argv[0] ? args.argv[0] : "<unknown>"; | 
|  | __abort_message_ptr = args.abort_message_ptr; | 
|  |  | 
|  | // AT_RANDOM is a pointer to 16 bytes of randomness on the stack. | 
|  | __stack_chk_guard = *reinterpret_cast<uintptr_t*>(getauxval(AT_RANDOM)); | 
|  |  | 
|  | // Get the main thread from TLS and add it to the thread list. | 
|  | pthread_internal_t* main_thread = __get_thread(); | 
|  | __pthread_internal_add(main_thread); | 
|  |  | 
|  | __system_properties_init(); // Requires 'environ'. | 
|  |  | 
|  | __libc_init_vdso(); | 
|  | } | 
|  |  | 
|  | __noreturn static void __early_abort(int line) { | 
|  | // We can't write to stdout or stderr because we're aborting before we've checked that | 
|  | // it's safe for us to use those file descriptors. We probably can't strace either, so | 
|  | // we rely on the fact that if we dereference a low address, either debuggerd or the | 
|  | // kernel's crash dump will show the fault address. | 
|  | *reinterpret_cast<int*>(line) = 0; | 
|  | _exit(EXIT_FAILURE); | 
|  | } | 
|  |  | 
|  | // Force any of the closed stdin, stdout and stderr to be associated with /dev/null. | 
|  | static void __nullify_closed_stdio() { | 
|  | int dev_null = TEMP_FAILURE_RETRY(open("/dev/null", O_RDWR)); | 
|  | if (dev_null == -1) { | 
|  | // init won't have /dev/null available, but SELinux provides an equivalent. | 
|  | dev_null = TEMP_FAILURE_RETRY(open("/sys/fs/selinux/null", O_RDWR)); | 
|  | } | 
|  | if (dev_null == -1) { | 
|  | __early_abort(__LINE__); | 
|  | } | 
|  |  | 
|  | // If any of the stdio file descriptors is valid and not associated | 
|  | // with /dev/null, dup /dev/null to it. | 
|  | for (int i = 0; i < 3; i++) { | 
|  | // If it is /dev/null already, we are done. | 
|  | if (i == dev_null) { | 
|  | continue; | 
|  | } | 
|  |  | 
|  | // Is this fd already open? | 
|  | int status = TEMP_FAILURE_RETRY(fcntl(i, F_GETFL)); | 
|  | if (status != -1) { | 
|  | continue; | 
|  | } | 
|  |  | 
|  | // The only error we allow is that the file descriptor does not | 
|  | // exist, in which case we dup /dev/null to it. | 
|  | if (errno == EBADF) { | 
|  | // Try dupping /dev/null to this stdio file descriptor and | 
|  | // repeat if there is a signal. Note that any errors in closing | 
|  | // the stdio descriptor are lost. | 
|  | status = TEMP_FAILURE_RETRY(dup2(dev_null, i)); | 
|  | if (status == -1) { | 
|  | __early_abort(__LINE__); | 
|  | } | 
|  | } else { | 
|  | __early_abort(__LINE__); | 
|  | } | 
|  | } | 
|  |  | 
|  | // If /dev/null is not one of the stdio file descriptors, close it. | 
|  | if (dev_null > 2) { | 
|  | if (close(dev_null) == -1) { | 
|  | __early_abort(__LINE__); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | // Check if the environment variable definition at 'envstr' | 
|  | // starts with '<name>=', and if so return the address of the | 
|  | // first character after the equal sign. Otherwise return null. | 
|  | static const char* env_match(const char* envstr, const char* name) { | 
|  | size_t i = 0; | 
|  |  | 
|  | while (envstr[i] == name[i] && name[i] != '\0') { | 
|  | ++i; | 
|  | } | 
|  |  | 
|  | if (name[i] == '\0' && envstr[i] == '=') { | 
|  | return envstr + i + 1; | 
|  | } | 
|  |  | 
|  | return nullptr; | 
|  | } | 
|  |  | 
|  | static bool __is_valid_environment_variable(const char* name) { | 
|  | // According to the kernel source, by default the kernel uses 32*PAGE_SIZE | 
|  | // as the maximum size for an environment variable definition. | 
|  | const int MAX_ENV_LEN = 32*4096; | 
|  |  | 
|  | if (name == nullptr) { | 
|  | return false; | 
|  | } | 
|  |  | 
|  | // Parse the string, looking for the first '=' there, and its size. | 
|  | int pos = 0; | 
|  | int first_equal_pos = -1; | 
|  | while (pos < MAX_ENV_LEN) { | 
|  | if (name[pos] == '\0') { | 
|  | break; | 
|  | } | 
|  | if (name[pos] == '=' && first_equal_pos < 0) { | 
|  | first_equal_pos = pos; | 
|  | } | 
|  | pos++; | 
|  | } | 
|  |  | 
|  | // Check that it's smaller than MAX_ENV_LEN (to detect non-zero terminated strings). | 
|  | if (pos >= MAX_ENV_LEN) { | 
|  | return false; | 
|  | } | 
|  |  | 
|  | // Check that it contains at least one equal sign that is not the first character | 
|  | if (first_equal_pos < 1) { | 
|  | return false; | 
|  | } | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | static bool __is_unsafe_environment_variable(const char* name) { | 
|  | // None of these should be allowed in setuid programs. | 
|  | static const char* const UNSAFE_VARIABLE_NAMES[] = { | 
|  | "GCONV_PATH", | 
|  | "GETCONF_DIR", | 
|  | "HOSTALIASES", | 
|  | "JE_MALLOC_CONF", | 
|  | "LD_AOUT_LIBRARY_PATH", | 
|  | "LD_AOUT_PRELOAD", | 
|  | "LD_AUDIT", | 
|  | "LD_DEBUG", | 
|  | "LD_DEBUG_OUTPUT", | 
|  | "LD_DYNAMIC_WEAK", | 
|  | "LD_LIBRARY_PATH", | 
|  | "LD_ORIGIN_PATH", | 
|  | "LD_PRELOAD", | 
|  | "LD_PROFILE", | 
|  | "LD_SHOW_AUXV", | 
|  | "LD_USE_LOAD_BIAS", | 
|  | "LOCALDOMAIN", | 
|  | "LOCPATH", | 
|  | "MALLOC_CHECK_", | 
|  | "MALLOC_CONF", | 
|  | "MALLOC_TRACE", | 
|  | "NIS_PATH", | 
|  | "NLSPATH", | 
|  | "RESOLV_HOST_CONF", | 
|  | "RES_OPTIONS", | 
|  | "TMPDIR", | 
|  | "TZDIR", | 
|  | nullptr | 
|  | }; | 
|  | for (size_t i = 0; UNSAFE_VARIABLE_NAMES[i] != nullptr; ++i) { | 
|  | if (env_match(name, UNSAFE_VARIABLE_NAMES[i]) != nullptr) { | 
|  | return true; | 
|  | } | 
|  | } | 
|  | return false; | 
|  | } | 
|  |  | 
|  | static void __sanitize_environment_variables(char** env) { | 
|  | bool is_AT_SECURE = getauxval(AT_SECURE); | 
|  | char** src = env; | 
|  | char** dst = env; | 
|  | for (; src[0] != nullptr; ++src) { | 
|  | if (!__is_valid_environment_variable(src[0])) { | 
|  | continue; | 
|  | } | 
|  | // Remove various unsafe environment variables if we're loading a setuid program. | 
|  | if (is_AT_SECURE && __is_unsafe_environment_variable(src[0])) { | 
|  | continue; | 
|  | } | 
|  | dst[0] = src[0]; | 
|  | ++dst; | 
|  | } | 
|  | dst[0] = nullptr; | 
|  | } | 
|  |  | 
|  | static void __initialize_personality() { | 
|  | #if !defined(__LP64__) | 
|  | int old_value = personality(0xffffffff); | 
|  | if (old_value == -1) { | 
|  | __libc_fatal("error getting old personality value: %s", strerror(errno)); | 
|  | } | 
|  |  | 
|  | if (personality((static_cast<unsigned int>(old_value) & ~PER_MASK) | PER_LINUX32) == -1) { | 
|  | __libc_fatal("error setting PER_LINUX32 personality: %s", strerror(errno)); | 
|  | } | 
|  | #endif | 
|  | } | 
|  |  | 
|  | void __libc_init_AT_SECURE(KernelArgumentBlock& args) { | 
|  | __libc_auxv = args.auxv; | 
|  |  | 
|  | // Check that the kernel provided a value for AT_SECURE. | 
|  | bool found_AT_SECURE = false; | 
|  | for (ElfW(auxv_t)* v = __libc_auxv; v->a_type != AT_NULL; ++v) { | 
|  | if (v->a_type == AT_SECURE) { | 
|  | found_AT_SECURE = true; | 
|  | break; | 
|  | } | 
|  | } | 
|  | if (!found_AT_SECURE) __early_abort(__LINE__); | 
|  |  | 
|  | if (getauxval(AT_SECURE)) { | 
|  | // If this is a setuid/setgid program, close the security hole described in | 
|  | // ftp://ftp.freebsd.org/pub/FreeBSD/CERT/advisories/FreeBSD-SA-02:23.stdio.asc | 
|  | __nullify_closed_stdio(); | 
|  |  | 
|  | __sanitize_environment_variables(args.envp); | 
|  | } | 
|  |  | 
|  | // Now the environment has been sanitized, make it available. | 
|  | environ = args.envp; | 
|  |  | 
|  | __initialize_personality(); | 
|  | } | 
|  |  | 
|  | /* This function will be called during normal program termination | 
|  | * to run the destructors that are listed in the .fini_array section | 
|  | * of the executable, if any. | 
|  | * | 
|  | * 'fini_array' points to a list of function addresses. The first | 
|  | * entry in the list has value -1, the last one has value 0. | 
|  | */ | 
|  | void __libc_fini(void* array) { | 
|  | typedef void (*Dtor)(); | 
|  | Dtor* fini_array = reinterpret_cast<Dtor*>(array); | 
|  | const Dtor minus1 = reinterpret_cast<Dtor>(static_cast<uintptr_t>(-1)); | 
|  |  | 
|  | // Sanity check - first entry must be -1. | 
|  | if (array == NULL || fini_array[0] != minus1) { | 
|  | return; | 
|  | } | 
|  |  | 
|  | // Skip over it. | 
|  | fini_array += 1; | 
|  |  | 
|  | // Count the number of destructors. | 
|  | int count = 0; | 
|  | while (fini_array[count] != NULL) { | 
|  | ++count; | 
|  | } | 
|  |  | 
|  | // Now call each destructor in reverse order. | 
|  | while (count > 0) { | 
|  | Dtor dtor = fini_array[--count]; | 
|  |  | 
|  | // Sanity check, any -1 in the list is ignored. | 
|  | if (dtor == minus1) { | 
|  | continue; | 
|  | } | 
|  |  | 
|  | dtor(); | 
|  | } | 
|  |  | 
|  | #ifndef LIBC_STATIC | 
|  | { | 
|  | extern void __libc_postfini(void) __attribute__((weak)); | 
|  | if (__libc_postfini) { | 
|  | __libc_postfini(); | 
|  | } | 
|  | } | 
|  | #endif | 
|  | } |