| /* | 
 |  * Copyright (C) 2014 The Android Open Source Project | 
 |  * | 
 |  * Licensed under the Apache License, Version 2.0 (the "License"); | 
 |  * you may not use this file except in compliance with the License. | 
 |  * You may obtain a copy of the License at | 
 |  * | 
 |  *      http://www.apache.org/licenses/LICENSE-2.0 | 
 |  * | 
 |  * Unless required by applicable law or agreed to in writing, software | 
 |  * distributed under the License is distributed on an "AS IS" BASIS, | 
 |  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | 
 |  * See the License for the specific language governing permissions and | 
 |  * limitations under the License. | 
 |  */ | 
 |  | 
 | #include <semaphore.h> | 
 |  | 
 | #include <errno.h> | 
 | #include <gtest/gtest.h> | 
 | #include <limits.h> | 
 | #include <pthread.h> | 
 | #include <time.h> | 
 | #include <unistd.h> | 
 |  | 
 | #include "private/bionic_constants.h" | 
 | #include "ScopedSignalHandler.h" | 
 |  | 
 | TEST(semaphore, sem_init) { | 
 |   sem_t s; | 
 |  | 
 |   // Perfectly fine initial values. | 
 |   ASSERT_EQ(0, sem_init(&s, 0, 0)); | 
 |   ASSERT_EQ(0, sem_init(&s, 0, 1)); | 
 |   ASSERT_EQ(0, sem_init(&s, 0, 123)); | 
 |  | 
 |   // Too small an initial value. | 
 |   errno = 0; | 
 |   ASSERT_EQ(-1, sem_init(&s, 0, -1)); | 
 |   ASSERT_EQ(EINVAL, errno); | 
 |  | 
 |   ASSERT_EQ(SEM_VALUE_MAX, sysconf(_SC_SEM_VALUE_MAX)); | 
 |  | 
 |   // The largest initial value. | 
 |   ASSERT_EQ(0, sem_init(&s, 0, SEM_VALUE_MAX)); | 
 |  | 
 |   // Too large an initial value. | 
 |   errno = 0; | 
 |   ASSERT_EQ(-1, sem_init(&s, 0, SEM_VALUE_MAX + 1)); | 
 |   ASSERT_EQ(EINVAL, errno); | 
 |  | 
 |   ASSERT_EQ(0, sem_destroy(&s)); | 
 | } | 
 |  | 
 | TEST(semaphore, sem_trywait) { | 
 |   sem_t s; | 
 |   ASSERT_EQ(0, sem_init(&s, 0, 3)); | 
 |   ASSERT_EQ(0, sem_trywait(&s)); | 
 |   ASSERT_EQ(0, sem_trywait(&s)); | 
 |   ASSERT_EQ(0, sem_trywait(&s)); | 
 |   errno = 0; | 
 |   ASSERT_EQ(-1, sem_trywait(&s)); | 
 |   ASSERT_EQ(EAGAIN, errno); | 
 |   ASSERT_EQ(0, sem_destroy(&s)); | 
 | } | 
 |  | 
 | static void SemWaitThreadTestFn(sem_t& sem) { | 
 |   ASSERT_EQ(0, sem_wait(&sem)); | 
 | } | 
 |  | 
 | static void* SemWaitThreadFn(void* arg) { | 
 |   SemWaitThreadTestFn(*reinterpret_cast<sem_t*>(arg)); | 
 |   return nullptr; | 
 | } | 
 |  | 
 | TEST(semaphore, sem_wait__sem_post) { | 
 |   sem_t s; | 
 |   ASSERT_EQ(0, sem_init(&s, 0, 0)); | 
 |  | 
 |   pthread_t t1, t2, t3; | 
 |   ASSERT_EQ(0, pthread_create(&t1, NULL, SemWaitThreadFn, &s)); | 
 |   ASSERT_EQ(0, pthread_create(&t2, NULL, SemWaitThreadFn, &s)); | 
 |   ASSERT_EQ(0, pthread_create(&t3, NULL, SemWaitThreadFn, &s)); | 
 |  | 
 |   ASSERT_EQ(0, sem_post(&s)); | 
 |   ASSERT_EQ(0, sem_post(&s)); | 
 |   ASSERT_EQ(0, sem_post(&s)); | 
 |  | 
 |   void* result; | 
 |   ASSERT_EQ(0, pthread_join(t1, &result)); | 
 |   ASSERT_EQ(0, pthread_join(t2, &result)); | 
 |   ASSERT_EQ(0, pthread_join(t3, &result)); | 
 | } | 
 |  | 
 | static inline void timespec_add_ms(timespec& ts, size_t ms) { | 
 |   ts.tv_sec  += ms / 1000; | 
 |   ts.tv_nsec += (ms % 1000) * 1000000; | 
 |   if (ts.tv_nsec >= NS_PER_S) { | 
 |     ts.tv_sec++; | 
 |     ts.tv_nsec -= NS_PER_S; | 
 |   } | 
 | } | 
 |  | 
 | TEST(semaphore, sem_timedwait) { | 
 |   sem_t s; | 
 |   ASSERT_EQ(0, sem_init(&s, 0, 0)); | 
 |  | 
 |   timespec ts; | 
 |   ASSERT_EQ(0, clock_gettime(CLOCK_REALTIME, &ts)); | 
 |   timespec_add_ms(ts, 100); | 
 |  | 
 |   errno = 0; | 
 |   ASSERT_EQ(-1, sem_timedwait(&s, &ts)); | 
 |   ASSERT_EQ(ETIMEDOUT, errno); | 
 |  | 
 |   // A negative timeout is an error. | 
 |   errno = 0; | 
 |   ts.tv_nsec = -1; | 
 |   ASSERT_EQ(-1, sem_timedwait(&s, &ts)); | 
 |   ASSERT_EQ(EINVAL, errno); | 
 |   errno = 0; | 
 |   ts.tv_nsec = NS_PER_S; | 
 |   ASSERT_EQ(-1, sem_timedwait(&s, &ts)); | 
 |   ASSERT_EQ(EINVAL, errno); | 
 |  | 
 |   errno = 0; | 
 |   ts.tv_nsec = NS_PER_S - 1; | 
 |   ts.tv_sec = -1; | 
 |   ASSERT_EQ(-1, sem_timedwait(&s, &ts)); | 
 |   ASSERT_EQ(ETIMEDOUT, errno); | 
 |  | 
 |   ASSERT_EQ(0, sem_destroy(&s)); | 
 | } | 
 |  | 
 | TEST(semaphore_DeathTest, sem_timedwait_null_timeout) { | 
 |   sem_t s; | 
 |   ASSERT_EQ(0, sem_init(&s, 0, 0)); | 
 |  | 
 |   ASSERT_EXIT(sem_timedwait(&s, nullptr), testing::KilledBySignal(SIGSEGV), ""); | 
 | } | 
 |  | 
 | TEST(semaphore, sem_getvalue) { | 
 |   sem_t s; | 
 |   ASSERT_EQ(0, sem_init(&s, 0, 0)); | 
 |  | 
 |   int i; | 
 |   ASSERT_EQ(0, sem_getvalue(&s, &i)); | 
 |   ASSERT_EQ(0, i); | 
 |  | 
 |   ASSERT_EQ(0, sem_post(&s)); | 
 |   ASSERT_EQ(0, sem_getvalue(&s, &i)); | 
 |   ASSERT_EQ(1, i); | 
 |  | 
 |   ASSERT_EQ(0, sem_post(&s)); | 
 |   ASSERT_EQ(0, sem_getvalue(&s, &i)); | 
 |   ASSERT_EQ(2, i); | 
 |  | 
 |   ASSERT_EQ(0, sem_wait(&s)); | 
 |   ASSERT_EQ(0, sem_getvalue(&s, &i)); | 
 |   ASSERT_EQ(1, i); | 
 | } | 
 |  | 
 | extern "C" void android_set_application_target_sdk_version(uint32_t target); | 
 |  | 
 | static void sem_wait_test_signal_handler(int) { | 
 | } | 
 |  | 
 | static void* SemWaitEINTRThreadFn(void* arg) { | 
 |   sem_t* sem = reinterpret_cast<sem_t*>(arg); | 
 |   uintptr_t have_eintr = 0; | 
 |   uintptr_t have_error = 0; | 
 |   while (true) { | 
 |     int result = sem_wait(sem); | 
 |     if (result == 0) { | 
 |       break; | 
 |     } | 
 |     if (result == -1) { | 
 |       if (errno == EINTR) { | 
 |         have_eintr = 1; | 
 |       } else { | 
 |         have_error = 1; | 
 |         break; | 
 |       } | 
 |     } | 
 |   } | 
 |   return reinterpret_cast<void*>((have_eintr << 1) | have_error); | 
 | } | 
 |  | 
 | TEST(semaphore, sem_wait_no_EINTR_in_sdk_less_equal_than_23) { | 
 | #if defined(__BIONIC__) | 
 |   android_set_application_target_sdk_version(23U); | 
 |   sem_t s; | 
 |   ASSERT_EQ(0, sem_init(&s, 0, 0)); | 
 |   ScopedSignalHandler handler(SIGUSR1, sem_wait_test_signal_handler); | 
 |   pthread_t thread; | 
 |   ASSERT_EQ(0, pthread_create(&thread, nullptr, SemWaitEINTRThreadFn, &s)); | 
 |   // Give some time for the thread to run sem_wait. | 
 |   usleep(500000); | 
 |   ASSERT_EQ(0, pthread_kill(thread, SIGUSR1)); | 
 |   // Give some time for the thread to handle signal. | 
 |   usleep(500000); | 
 |   ASSERT_EQ(0, sem_post(&s)); | 
 |   void* result; | 
 |   ASSERT_EQ(0, pthread_join(thread, &result)); | 
 |   ASSERT_EQ(0U, reinterpret_cast<uintptr_t>(result)); | 
 | #else | 
 |   GTEST_LOG_(INFO) << "This test tests sem_wait's compatibility for old sdk versions"; | 
 | #endif | 
 | } | 
 |  | 
 | TEST(semaphore, sem_wait_EINTR_in_sdk_greater_than_23) { | 
 | #if defined(__BIONIC__) | 
 |   android_set_application_target_sdk_version(24U); | 
 | #endif | 
 |   sem_t s; | 
 |   ASSERT_EQ(0, sem_init(&s, 0, 0)); | 
 |   ScopedSignalHandler handler(SIGUSR1, sem_wait_test_signal_handler); | 
 |   pthread_t thread; | 
 |   ASSERT_EQ(0, pthread_create(&thread, nullptr, SemWaitEINTRThreadFn, &s)); | 
 |   // Give some time for the thread to run sem_wait. | 
 |   usleep(500000); | 
 |   ASSERT_EQ(0, pthread_kill(thread, SIGUSR1)); | 
 |   // Give some time for the thread to handle signal. | 
 |   usleep(500000); | 
 |   ASSERT_EQ(0, sem_post(&s)); | 
 |   void* result; | 
 |   ASSERT_EQ(0, pthread_join(thread, &result)); | 
 |   ASSERT_EQ(2U, reinterpret_cast<uintptr_t>(result)); | 
 | } |