| /* |
| * Copyright (C) 2009 The Android Open Source Project |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in |
| * the documentation and/or other materials provided with the |
| * distribution. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS |
| * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE |
| * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, |
| * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, |
| * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS |
| * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED |
| * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, |
| * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT |
| * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF |
| * SUCH DAMAGE. |
| */ |
| |
| /* |
| * Contains definition of structures, global variables, and implementation of |
| * routines that are used by malloc leak detection code and other components in |
| * the system. The trick is that some components expect these data and |
| * routines to be defined / implemented in libc.so library, regardless |
| * whether or not MALLOC_LEAK_CHECK macro is defined. To make things even |
| * more tricky, malloc leak detection code, implemented in |
| * libc_malloc_debug.so also requires access to these variables and routines |
| * (to fill allocation entry hash table, for example). So, all relevant |
| * variables and routines are defined / implemented here and exported |
| * to all, leak detection code and other components via dynamic (libc.so), |
| * or static (libc.a) linking. |
| */ |
| |
| #include <stdlib.h> |
| #include <pthread.h> |
| #include <unistd.h> |
| #include "dlmalloc.h" |
| #include "malloc_debug_common.h" |
| |
| /* |
| * In a VM process, this is set to 1 after fork()ing out of zygote. |
| */ |
| int gMallocLeakZygoteChild = 0; |
| |
| pthread_mutex_t gAllocationsMutex = PTHREAD_MUTEX_INITIALIZER; |
| HashTable gHashTable; |
| |
| // ============================================================================= |
| // output functions |
| // ============================================================================= |
| |
| static int hash_entry_compare(const void* arg1, const void* arg2) |
| { |
| HashEntry* e1 = *(HashEntry**)arg1; |
| HashEntry* e2 = *(HashEntry**)arg2; |
| |
| size_t nbAlloc1 = e1->allocations; |
| size_t nbAlloc2 = e2->allocations; |
| size_t size1 = e1->size & ~SIZE_FLAG_MASK; |
| size_t size2 = e2->size & ~SIZE_FLAG_MASK; |
| size_t alloc1 = nbAlloc1 * size1; |
| size_t alloc2 = nbAlloc2 * size2; |
| |
| // sort in descending order by: |
| // 1) total size |
| // 2) number of allocations |
| // |
| // This is used for sorting, not determination of equality, so we don't |
| // need to compare the bit flags. |
| int result; |
| if (alloc1 > alloc2) { |
| result = -1; |
| } else if (alloc1 < alloc2) { |
| result = 1; |
| } else { |
| if (nbAlloc1 > nbAlloc2) { |
| result = -1; |
| } else if (nbAlloc1 < nbAlloc2) { |
| result = 1; |
| } else { |
| result = 0; |
| } |
| } |
| return result; |
| } |
| |
| /* |
| * Retrieve native heap information. |
| * |
| * "*info" is set to a buffer we allocate |
| * "*overallSize" is set to the size of the "info" buffer |
| * "*infoSize" is set to the size of a single entry |
| * "*totalMemory" is set to the sum of all allocations we're tracking; does |
| * not include heap overhead |
| * "*backtraceSize" is set to the maximum number of entries in the back trace |
| */ |
| void get_malloc_leak_info(uint8_t** info, size_t* overallSize, |
| size_t* infoSize, size_t* totalMemory, size_t* backtraceSize) |
| { |
| // don't do anything if we have invalid arguments |
| if (info == NULL || overallSize == NULL || infoSize == NULL || |
| totalMemory == NULL || backtraceSize == NULL) { |
| return; |
| } |
| |
| pthread_mutex_lock(&gAllocationsMutex); |
| |
| if (gHashTable.count == 0) { |
| *info = NULL; |
| *overallSize = 0; |
| *infoSize = 0; |
| *totalMemory = 0; |
| *backtraceSize = 0; |
| goto done; |
| } |
| |
| void** list = (void**)dlmalloc(sizeof(void*) * gHashTable.count); |
| |
| // get the entries into an array to be sorted |
| int index = 0; |
| int i; |
| for (i = 0 ; i < HASHTABLE_SIZE ; i++) { |
| HashEntry* entry = gHashTable.slots[i]; |
| while (entry != NULL) { |
| list[index] = entry; |
| *totalMemory = *totalMemory + |
| ((entry->size & ~SIZE_FLAG_MASK) * entry->allocations); |
| index++; |
| entry = entry->next; |
| } |
| } |
| |
| // XXX: the protocol doesn't allow variable size for the stack trace (yet) |
| *infoSize = (sizeof(size_t) * 2) + (sizeof(intptr_t) * BACKTRACE_SIZE); |
| *overallSize = *infoSize * gHashTable.count; |
| *backtraceSize = BACKTRACE_SIZE; |
| |
| // now get A byte array big enough for this |
| *info = (uint8_t*)dlmalloc(*overallSize); |
| |
| if (*info == NULL) { |
| *overallSize = 0; |
| goto out_nomem_info; |
| } |
| |
| qsort((void*)list, gHashTable.count, sizeof(void*), hash_entry_compare); |
| |
| uint8_t* head = *info; |
| const int count = gHashTable.count; |
| for (i = 0 ; i < count ; i++) { |
| HashEntry* entry = list[i]; |
| size_t entrySize = (sizeof(size_t) * 2) + (sizeof(intptr_t) * entry->numEntries); |
| if (entrySize < *infoSize) { |
| /* we're writing less than a full entry, clear out the rest */ |
| memset(head + entrySize, 0, *infoSize - entrySize); |
| } else { |
| /* make sure the amount we're copying doesn't exceed the limit */ |
| entrySize = *infoSize; |
| } |
| memcpy(head, &(entry->size), entrySize); |
| head += *infoSize; |
| } |
| |
| out_nomem_info: |
| dlfree(list); |
| |
| done: |
| pthread_mutex_unlock(&gAllocationsMutex); |
| } |
| |
| void free_malloc_leak_info(uint8_t* info) |
| { |
| dlfree(info); |
| } |
| |
| struct mallinfo mallinfo() |
| { |
| return dlmallinfo(); |
| } |
| |
| void* valloc(size_t bytes) { |
| /* assume page size of 4096 bytes */ |
| return memalign( getpagesize(), bytes ); |
| } |
| |
| /* Support for malloc debugging. |
| * Note that if USE_DL_PREFIX is not defined, it's assumed that memory |
| * allocation routines are implemented somewhere else, so all our custom |
| * malloc routines should not be compiled at all. |
| */ |
| #ifdef USE_DL_PREFIX |
| |
| /* Table for dispatching malloc calls, initialized with default dispatchers. */ |
| const MallocDebug __libc_malloc_default_dispatch __attribute__((aligned(32))) = |
| { |
| dlmalloc, dlfree, dlcalloc, dlrealloc, dlmemalign |
| }; |
| |
| /* Selector of dispatch table to use for dispatching malloc calls. */ |
| const MallocDebug* __libc_malloc_dispatch = &__libc_malloc_default_dispatch; |
| |
| void* malloc(size_t bytes) { |
| return __libc_malloc_dispatch->malloc(bytes); |
| } |
| void free(void* mem) { |
| __libc_malloc_dispatch->free(mem); |
| } |
| void* calloc(size_t n_elements, size_t elem_size) { |
| return __libc_malloc_dispatch->calloc(n_elements, elem_size); |
| } |
| void* realloc(void* oldMem, size_t bytes) { |
| return __libc_malloc_dispatch->realloc(oldMem, bytes); |
| } |
| void* memalign(size_t alignment, size_t bytes) { |
| return __libc_malloc_dispatch->memalign(alignment, bytes); |
| } |
| |
| /* We implement malloc debugging only in libc.so, so code bellow |
| * must be excluded if we compile this file for static libc.a |
| */ |
| #ifndef LIBC_STATIC |
| #include <sys/system_properties.h> |
| #include <dlfcn.h> |
| #include "logd.h" |
| |
| // ============================================================================= |
| // log functions |
| // ============================================================================= |
| |
| #define debug_log(format, ...) \ |
| __libc_android_log_print(ANDROID_LOG_DEBUG, "libc", (format), ##__VA_ARGS__ ) |
| #define error_log(format, ...) \ |
| __libc_android_log_print(ANDROID_LOG_ERROR, "libc", (format), ##__VA_ARGS__ ) |
| #define info_log(format, ...) \ |
| __libc_android_log_print(ANDROID_LOG_INFO, "libc", (format), ##__VA_ARGS__ ) |
| |
| /* Table for dispatching malloc calls, depending on environment. */ |
| static MallocDebug gMallocUse __attribute__((aligned(32))) = { |
| dlmalloc, dlfree, dlcalloc, dlrealloc, dlmemalign |
| }; |
| |
| extern char* __progname; |
| |
| /* Handle to shared library where actual memory allocation is implemented. |
| * This library is loaded and memory allocation calls are redirected there |
| * when libc.debug.malloc environment variable contains value other than |
| * zero: |
| * 1 - For memory leak detections. |
| * 5 - For filling allocated / freed memory with patterns defined by |
| * CHK_SENTINEL_VALUE, and CHK_FILL_FREE macros. |
| * 10 - For adding pre-, and post- allocation stubs in order to detect |
| * buffer overruns. |
| * Note that emulator's memory allocation instrumentation is not controlled by |
| * libc.debug.malloc value, but rather by emulator, started with -memcheck |
| * option. Note also, that if emulator has started with -memcheck option, |
| * emulator's instrumented memory allocation will take over value saved in |
| * libc.debug.malloc. In other words, if emulator has started with -memcheck |
| * option, libc.debug.malloc value is ignored. |
| * Actual functionality for debug levels 1-10 is implemented in |
| * libc_malloc_debug_leak.so, while functionality for emultor's instrumented |
| * allocations is implemented in libc_malloc_debug_qemu.so and can be run inside |
| * the emulator only. |
| */ |
| static void* libc_malloc_impl_handle = NULL; |
| |
| /* Make sure we have MALLOC_ALIGNMENT that matches the one that is |
| * used in dlmalloc. Emulator's memchecker needs this value to properly |
| * align its guarding zones. |
| */ |
| #ifndef MALLOC_ALIGNMENT |
| #define MALLOC_ALIGNMENT ((size_t)8U) |
| #endif /* MALLOC_ALIGNMENT */ |
| |
| /* Initializes memory allocation framework once per process. */ |
| static void malloc_init_impl(void) |
| { |
| const char* so_name = NULL; |
| MallocDebugInit malloc_debug_initialize = NULL; |
| unsigned int qemu_running = 0; |
| unsigned int debug_level = 0; |
| unsigned int memcheck_enabled = 0; |
| char env[PROP_VALUE_MAX]; |
| char memcheck_tracing[PROP_VALUE_MAX]; |
| |
| /* Get custom malloc debug level. Note that emulator started with |
| * memory checking option will have priority over debug level set in |
| * libc.debug.malloc system property. */ |
| if (__system_property_get("ro.kernel.qemu", env) && atoi(env)) { |
| qemu_running = 1; |
| if (__system_property_get("ro.kernel.memcheck", memcheck_tracing)) { |
| if (memcheck_tracing[0] != '0') { |
| // Emulator has started with memory tracing enabled. Enforce it. |
| debug_level = 20; |
| memcheck_enabled = 1; |
| } |
| } |
| } |
| |
| /* If debug level has not been set by memcheck option in the emulator, |
| * lets grab it from libc.debug.malloc system property. */ |
| if (!debug_level && __system_property_get("libc.debug.malloc", env)) { |
| debug_level = atoi(env); |
| } |
| |
| /* Debug level 0 means that we should use dlxxx allocation |
| * routines (default). */ |
| if (!debug_level) { |
| return; |
| } |
| |
| // Lets see which .so must be loaded for the requested debug level |
| switch (debug_level) { |
| case 1: |
| case 5: |
| case 10: |
| so_name = "/system/lib/libc_malloc_debug_leak.so"; |
| break; |
| case 20: |
| // Quick check: debug level 20 can only be handled in emulator. |
| if (!qemu_running) { |
| error_log("%s: Debug level %d can only be set in emulator\n", |
| __progname, debug_level); |
| return; |
| } |
| // Make sure that memory checking has been enabled in emulator. |
| if (!memcheck_enabled) { |
| error_log("%s: Memory checking is not enabled in the emulator\n", |
| __progname); |
| return; |
| } |
| so_name = "/system/lib/libc_malloc_debug_qemu.so"; |
| break; |
| default: |
| error_log("%s: Debug level %d is unknown\n", |
| __progname, debug_level); |
| return; |
| } |
| |
| // Load .so that implements the required malloc debugging functionality. |
| libc_malloc_impl_handle = dlopen(so_name, RTLD_LAZY); |
| if (libc_malloc_impl_handle == NULL) { |
| error_log("%s: Missing module %s required for malloc debug level %d\n", |
| __progname, so_name, debug_level); |
| return; |
| } |
| |
| // Initialize malloc debugging in the loaded module. |
| malloc_debug_initialize = |
| dlsym(libc_malloc_impl_handle, "malloc_debug_initialize"); |
| if (malloc_debug_initialize == NULL) { |
| error_log("%s: Initialization routine is not found in %s\n", |
| __progname, so_name); |
| dlclose(libc_malloc_impl_handle); |
| return; |
| } |
| if (malloc_debug_initialize()) { |
| dlclose(libc_malloc_impl_handle); |
| return; |
| } |
| |
| if (debug_level == 20) { |
| // For memory checker we need to do extra initialization. |
| int (*memcheck_initialize)(int, const char*) = |
| dlsym(libc_malloc_impl_handle, "memcheck_initialize"); |
| if (memcheck_initialize == NULL) { |
| error_log("%s: memcheck_initialize routine is not found in %s\n", |
| __progname, so_name); |
| dlclose(libc_malloc_impl_handle); |
| return; |
| } |
| if (memcheck_initialize(MALLOC_ALIGNMENT, memcheck_tracing)) { |
| dlclose(libc_malloc_impl_handle); |
| return; |
| } |
| } |
| |
| // Initialize malloc dispatch table with appropriate routines. |
| switch (debug_level) { |
| case 1: |
| __libc_android_log_print(ANDROID_LOG_INFO, "libc", |
| "%s using MALLOC_DEBUG = %d (leak checker)\n", |
| __progname, debug_level); |
| gMallocUse.malloc = |
| dlsym(libc_malloc_impl_handle, "leak_malloc"); |
| gMallocUse.free = |
| dlsym(libc_malloc_impl_handle, "leak_free"); |
| gMallocUse.calloc = |
| dlsym(libc_malloc_impl_handle, "leak_calloc"); |
| gMallocUse.realloc = |
| dlsym(libc_malloc_impl_handle, "leak_realloc"); |
| gMallocUse.memalign = |
| dlsym(libc_malloc_impl_handle, "leak_memalign"); |
| break; |
| case 5: |
| __libc_android_log_print(ANDROID_LOG_INFO, "libc", |
| "%s using MALLOC_DEBUG = %d (fill)\n", |
| __progname, debug_level); |
| gMallocUse.malloc = |
| dlsym(libc_malloc_impl_handle, "fill_malloc"); |
| gMallocUse.free = |
| dlsym(libc_malloc_impl_handle, "fill_free"); |
| gMallocUse.calloc = dlcalloc; |
| gMallocUse.realloc = |
| dlsym(libc_malloc_impl_handle, "fill_realloc"); |
| gMallocUse.memalign = |
| dlsym(libc_malloc_impl_handle, "fill_memalign"); |
| break; |
| case 10: |
| __libc_android_log_print(ANDROID_LOG_INFO, "libc", |
| "%s using MALLOC_DEBUG = %d (sentinels, fill)\n", |
| __progname, debug_level); |
| gMallocUse.malloc = |
| dlsym(libc_malloc_impl_handle, "chk_malloc"); |
| gMallocUse.free = |
| dlsym(libc_malloc_impl_handle, "chk_free"); |
| gMallocUse.calloc = |
| dlsym(libc_malloc_impl_handle, "chk_calloc"); |
| gMallocUse.realloc = |
| dlsym(libc_malloc_impl_handle, "chk_realloc"); |
| gMallocUse.memalign = |
| dlsym(libc_malloc_impl_handle, "chk_memalign"); |
| break; |
| case 20: |
| __libc_android_log_print(ANDROID_LOG_INFO, "libc", |
| "%s[%u] using MALLOC_DEBUG = %d (instrumented for emulator)\n", |
| __progname, getpid(), debug_level); |
| gMallocUse.malloc = |
| dlsym(libc_malloc_impl_handle, "qemu_instrumented_malloc"); |
| gMallocUse.free = |
| dlsym(libc_malloc_impl_handle, "qemu_instrumented_free"); |
| gMallocUse.calloc = |
| dlsym(libc_malloc_impl_handle, "qemu_instrumented_calloc"); |
| gMallocUse.realloc = |
| dlsym(libc_malloc_impl_handle, "qemu_instrumented_realloc"); |
| gMallocUse.memalign = |
| dlsym(libc_malloc_impl_handle, "qemu_instrumented_memalign"); |
| break; |
| default: |
| break; |
| } |
| |
| // Make sure dispatch table is initialized |
| if ((gMallocUse.malloc == NULL) || |
| (gMallocUse.free == NULL) || |
| (gMallocUse.calloc == NULL) || |
| (gMallocUse.realloc == NULL) || |
| (gMallocUse.memalign == NULL)) { |
| error_log("%s: Cannot initialize malloc dispatch table for debug level" |
| " %d: %p, %p, %p, %p, %p\n", |
| __progname, debug_level, |
| gMallocUse.malloc, gMallocUse.free, |
| gMallocUse.calloc, gMallocUse.realloc, |
| gMallocUse.memalign); |
| dlclose(libc_malloc_impl_handle); |
| libc_malloc_impl_handle = NULL; |
| } else { |
| __libc_malloc_dispatch = &gMallocUse; |
| } |
| } |
| |
| static pthread_once_t malloc_init_once_ctl = PTHREAD_ONCE_INIT; |
| |
| #endif // !LIBC_STATIC |
| #endif // USE_DL_PREFIX |
| |
| /* Initializes memory allocation framework. |
| * This routine is called from __libc_init routines implemented |
| * in libc_init_static.c and libc_init_dynamic.c files. |
| */ |
| void malloc_debug_init(void) |
| { |
| /* We need to initialize malloc iff we implement here custom |
| * malloc routines (i.e. USE_DL_PREFIX is defined) for libc.so */ |
| #if defined(USE_DL_PREFIX) && !defined(LIBC_STATIC) |
| if (pthread_once(&malloc_init_once_ctl, malloc_init_impl)) { |
| error_log("Unable to initialize malloc_debug component."); |
| } |
| #endif // USE_DL_PREFIX && !LIBC_STATIC |
| } |