| /* |
| * Copyright (C) 2008 The Android Open Source Project |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in |
| * the documentation and/or other materials provided with the |
| * distribution. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS |
| * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE |
| * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, |
| * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, |
| * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS |
| * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED |
| * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, |
| * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT |
| * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF |
| * SUCH DAMAGE. |
| */ |
| |
| #include <private/bionic_asm.h> |
| |
| /* |
| * Optimized memcpy() for ARM. |
| * |
| * note that memcpy() always returns the destination pointer, |
| * so we have to preserve R0. |
| */ |
| |
| .syntax unified |
| |
| ENTRY(__memcpy_chk) |
| cmp r2, r3 |
| bls memcpy |
| |
| // Preserve lr for backtrace. |
| push {lr} |
| .cfi_def_cfa_offset 4 |
| .cfi_rel_offset lr, 0 |
| |
| bl __memcpy_chk_fail |
| END(__memcpy_chk) |
| |
| ENTRY(memcpy) |
| /* The stack must always be 64-bits aligned to be compliant with the |
| * ARM ABI. Since we have to save R0, we might as well save R4 |
| * which we can use for better pipelining of the reads below |
| */ |
| stmfd sp!, {r0, r4, lr} |
| .cfi_def_cfa_offset 12 |
| .cfi_rel_offset r0, 0 |
| .cfi_rel_offset r4, 4 |
| .cfi_rel_offset lr, 8 |
| /* Making room for r5-r11 which will be spilled later */ |
| sub sp, sp, #28 |
| .cfi_adjust_cfa_offset 28 |
| |
| // preload the destination because we'll align it to a cache line |
| // with small writes. Also start the source "pump". |
| pld [r0, #0] |
| pld [r1, #0] |
| pld [r1, #32] |
| |
| /* it simplifies things to take care of len<4 early */ |
| cmp r2, #4 |
| blo .Lcopy_last_3_and_return |
| |
| /* compute the offset to align the source |
| * offset = (4-(src&3))&3 = -src & 3 |
| */ |
| rsb r3, r1, #0 |
| ands r3, r3, #3 |
| beq .Lsrc_aligned |
| |
| /* align source to 32 bits. We need to insert 2 instructions between |
| * a ldr[b|h] and str[b|h] because byte and half-word instructions |
| * stall 2 cycles. |
| */ |
| movs r12, r3, lsl #31 |
| sub r2, r2, r3 /* we know that r3 <= r2 because r2 >= 4 */ |
| ldrbmi r3, [r1], #1 |
| ldrbcs r4, [r1], #1 |
| ldrbcs r12,[r1], #1 |
| strbmi r3, [r0], #1 |
| strbcs r4, [r0], #1 |
| strbcs r12,[r0], #1 |
| |
| .Lsrc_aligned: |
| |
| /* see if src and dst are aligned together (congruent) */ |
| eor r12, r0, r1 |
| tst r12, #3 |
| bne .Lnon_congruent |
| |
| /* Use post-incriment mode for stm to spill r5-r11 to reserved stack |
| * frame. Don't update sp. |
| */ |
| stmea sp, {r5-r11} |
| |
| /* align the destination to a cache-line */ |
| rsb r3, r0, #0 |
| ands r3, r3, #0x1C |
| beq .Lcongruent_aligned32 |
| cmp r3, r2 |
| andhi r3, r2, #0x1C |
| |
| /* conditionally copies 0 to 7 words (length in r3) */ |
| movs r12, r3, lsl #28 |
| ldmcs r1!, {r4, r5, r6, r7} /* 16 bytes */ |
| ldmmi r1!, {r8, r9} /* 8 bytes */ |
| stmcs r0!, {r4, r5, r6, r7} |
| stmmi r0!, {r8, r9} |
| tst r3, #0x4 |
| ldrne r10,[r1], #4 /* 4 bytes */ |
| strne r10,[r0], #4 |
| sub r2, r2, r3 |
| |
| .Lcongruent_aligned32: |
| /* |
| * here source is aligned to 32 bytes. |
| */ |
| |
| .Lcached_aligned32: |
| subs r2, r2, #32 |
| blo .Lless_than_32_left |
| |
| /* |
| * We preload a cache-line up to 64 bytes ahead. On the 926, this will |
| * stall only until the requested world is fetched, but the linefill |
| * continues in the the background. |
| * While the linefill is going, we write our previous cache-line |
| * into the write-buffer (which should have some free space). |
| * When the linefill is done, the writebuffer will |
| * start dumping its content into memory |
| * |
| * While all this is going, we then load a full cache line into |
| * 8 registers, this cache line should be in the cache by now |
| * (or partly in the cache). |
| * |
| * This code should work well regardless of the source/dest alignment. |
| * |
| */ |
| |
| // Align the preload register to a cache-line because the cpu does |
| // "critical word first" (the first word requested is loaded first). |
| bic r12, r1, #0x1F |
| add r12, r12, #64 |
| |
| 1: ldmia r1!, { r4-r11 } |
| pld [r12, #64] |
| subs r2, r2, #32 |
| |
| // NOTE: if r12 is more than 64 ahead of r1, the following ldrhi |
| // for ARM9 preload will not be safely guarded by the preceding subs. |
| // When it is safely guarded the only possibility to have SIGSEGV here |
| // is because the caller overstates the length. |
| ldrhi r3, [r12], #32 /* cheap ARM9 preload */ |
| stmia r0!, { r4-r11 } |
| bhs 1b |
| |
| add r2, r2, #32 |
| |
| .Lless_than_32_left: |
| /* |
| * less than 32 bytes left at this point (length in r2) |
| */ |
| |
| /* skip all this if there is nothing to do, which should |
| * be a common case (if not executed the code below takes |
| * about 16 cycles) |
| */ |
| tst r2, #0x1F |
| beq 1f |
| |
| /* conditionnaly copies 0 to 31 bytes */ |
| movs r12, r2, lsl #28 |
| ldmcs r1!, {r4, r5, r6, r7} /* 16 bytes */ |
| ldmmi r1!, {r8, r9} /* 8 bytes */ |
| stmcs r0!, {r4, r5, r6, r7} |
| stmmi r0!, {r8, r9} |
| movs r12, r2, lsl #30 |
| ldrcs r3, [r1], #4 /* 4 bytes */ |
| ldrhmi r4, [r1], #2 /* 2 bytes */ |
| strcs r3, [r0], #4 |
| strhmi r4, [r0], #2 |
| tst r2, #0x1 |
| ldrbne r3, [r1] /* last byte */ |
| strbne r3, [r0] |
| |
| /* we're done! restore everything and return */ |
| 1: ldmfd sp!, {r5-r11} |
| ldmfd sp!, {r0, r4, pc} |
| |
| /********************************************************************/ |
| |
| .Lnon_congruent: |
| /* |
| * here source is aligned to 4 bytes |
| * but destination is not. |
| * |
| * in the code below r2 is the number of bytes read |
| * (the number of bytes written is always smaller, because we have |
| * partial words in the shift queue) |
| */ |
| cmp r2, #4 |
| blo .Lcopy_last_3_and_return |
| |
| /* Use post-increment mode for stm to spill r5-r11 to reserved stack |
| * frame. Don't update sp. |
| */ |
| stmea sp, {r5-r11} |
| |
| /* compute shifts needed to align src to dest */ |
| rsb r5, r0, #0 |
| and r5, r5, #3 /* r5 = # bytes in partial words */ |
| mov r12, r5, lsl #3 /* r12 = right */ |
| rsb lr, r12, #32 /* lr = left */ |
| |
| /* read the first word */ |
| ldr r3, [r1], #4 |
| sub r2, r2, #4 |
| |
| /* write a partial word (0 to 3 bytes), such that destination |
| * becomes aligned to 32 bits (r5 = nb of words to copy for alignment) |
| */ |
| movs r5, r5, lsl #31 |
| strbmi r3, [r0], #1 |
| movmi r3, r3, lsr #8 |
| strbcs r3, [r0], #1 |
| movcs r3, r3, lsr #8 |
| strbcs r3, [r0], #1 |
| movcs r3, r3, lsr #8 |
| |
| cmp r2, #4 |
| blo .Lpartial_word_tail |
| |
| /* Align destination to 32 bytes (cache line boundary) */ |
| 1: tst r0, #0x1c |
| beq 2f |
| ldr r5, [r1], #4 |
| sub r2, r2, #4 |
| orr r4, r3, r5, lsl lr |
| mov r3, r5, lsr r12 |
| str r4, [r0], #4 |
| cmp r2, #4 |
| bhs 1b |
| blo .Lpartial_word_tail |
| |
| /* copy 32 bytes at a time */ |
| 2: subs r2, r2, #32 |
| blo .Lless_than_thirtytwo |
| |
| /* Use immediate mode for the shifts, because there is an extra cycle |
| * for register shifts, which could account for up to 50% of |
| * performance hit. |
| */ |
| |
| cmp r12, #24 |
| beq .Lloop24 |
| cmp r12, #8 |
| beq .Lloop8 |
| |
| .Lloop16: |
| ldr r12, [r1], #4 |
| 1: mov r4, r12 |
| ldmia r1!, { r5,r6,r7, r8,r9,r10,r11} |
| pld [r1, #64] |
| subs r2, r2, #32 |
| ldrhs r12, [r1], #4 |
| orr r3, r3, r4, lsl #16 |
| mov r4, r4, lsr #16 |
| orr r4, r4, r5, lsl #16 |
| mov r5, r5, lsr #16 |
| orr r5, r5, r6, lsl #16 |
| mov r6, r6, lsr #16 |
| orr r6, r6, r7, lsl #16 |
| mov r7, r7, lsr #16 |
| orr r7, r7, r8, lsl #16 |
| mov r8, r8, lsr #16 |
| orr r8, r8, r9, lsl #16 |
| mov r9, r9, lsr #16 |
| orr r9, r9, r10, lsl #16 |
| mov r10, r10, lsr #16 |
| orr r10, r10, r11, lsl #16 |
| stmia r0!, {r3,r4,r5,r6, r7,r8,r9,r10} |
| mov r3, r11, lsr #16 |
| bhs 1b |
| b .Lless_than_thirtytwo |
| |
| .Lloop8: |
| ldr r12, [r1], #4 |
| 1: mov r4, r12 |
| ldmia r1!, { r5,r6,r7, r8,r9,r10,r11} |
| pld [r1, #64] |
| subs r2, r2, #32 |
| ldrhs r12, [r1], #4 |
| orr r3, r3, r4, lsl #24 |
| mov r4, r4, lsr #8 |
| orr r4, r4, r5, lsl #24 |
| mov r5, r5, lsr #8 |
| orr r5, r5, r6, lsl #24 |
| mov r6, r6, lsr #8 |
| orr r6, r6, r7, lsl #24 |
| mov r7, r7, lsr #8 |
| orr r7, r7, r8, lsl #24 |
| mov r8, r8, lsr #8 |
| orr r8, r8, r9, lsl #24 |
| mov r9, r9, lsr #8 |
| orr r9, r9, r10, lsl #24 |
| mov r10, r10, lsr #8 |
| orr r10, r10, r11, lsl #24 |
| stmia r0!, {r3,r4,r5,r6, r7,r8,r9,r10} |
| mov r3, r11, lsr #8 |
| bhs 1b |
| b .Lless_than_thirtytwo |
| |
| .Lloop24: |
| ldr r12, [r1], #4 |
| 1: mov r4, r12 |
| ldmia r1!, { r5,r6,r7, r8,r9,r10,r11} |
| pld [r1, #64] |
| subs r2, r2, #32 |
| ldrhs r12, [r1], #4 |
| orr r3, r3, r4, lsl #8 |
| mov r4, r4, lsr #24 |
| orr r4, r4, r5, lsl #8 |
| mov r5, r5, lsr #24 |
| orr r5, r5, r6, lsl #8 |
| mov r6, r6, lsr #24 |
| orr r6, r6, r7, lsl #8 |
| mov r7, r7, lsr #24 |
| orr r7, r7, r8, lsl #8 |
| mov r8, r8, lsr #24 |
| orr r8, r8, r9, lsl #8 |
| mov r9, r9, lsr #24 |
| orr r9, r9, r10, lsl #8 |
| mov r10, r10, lsr #24 |
| orr r10, r10, r11, lsl #8 |
| stmia r0!, {r3,r4,r5,r6, r7,r8,r9,r10} |
| mov r3, r11, lsr #24 |
| bhs 1b |
| |
| |
| .Lless_than_thirtytwo: |
| /* copy the last 0 to 31 bytes of the source */ |
| rsb r12, lr, #32 /* we corrupted r12, recompute it */ |
| add r2, r2, #32 |
| cmp r2, #4 |
| blo .Lpartial_word_tail |
| |
| 1: ldr r5, [r1], #4 |
| sub r2, r2, #4 |
| orr r4, r3, r5, lsl lr |
| mov r3, r5, lsr r12 |
| str r4, [r0], #4 |
| cmp r2, #4 |
| bhs 1b |
| |
| .Lpartial_word_tail: |
| /* we have a partial word in the input buffer */ |
| movs r5, lr, lsl #(31-3) |
| strbmi r3, [r0], #1 |
| movmi r3, r3, lsr #8 |
| strbcs r3, [r0], #1 |
| movcs r3, r3, lsr #8 |
| strbcs r3, [r0], #1 |
| |
| /* Refill spilled registers from the stack. Don't update sp. */ |
| ldmfd sp, {r5-r11} |
| |
| .Lcopy_last_3_and_return: |
| movs r2, r2, lsl #31 /* copy remaining 0, 1, 2 or 3 bytes */ |
| ldrbmi r2, [r1], #1 |
| ldrbcs r3, [r1], #1 |
| ldrbcs r12,[r1] |
| strbmi r2, [r0], #1 |
| strbcs r3, [r0], #1 |
| strbcs r12,[r0] |
| |
| /* we're done! restore sp and spilled registers and return */ |
| add sp, sp, #28 |
| ldmfd sp!, {r0, r4, pc} |
| END(memcpy) |