diff --git a/adb/adb.bash b/adb/adb.bash
new file mode 100644
index 0000000..d36bec3
--- /dev/null
+++ b/adb/adb.bash
@@ -0,0 +1,499 @@
+# /* vim: set ai ts=4 ft=sh: */
+#
+# Copyright 2011, The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+_adb() {
+    if ! type -t "$1" >/dev/null; then
+        return
+    fi
+
+    if type -t _init_completion >/dev/null; then
+        _init_completion || return
+    fi
+
+    local where i cur serial
+    COMPREPLY=()
+
+    serial="${ANDROID_SERIAL:-none}"
+    where=OPTIONS
+    for ((i=1; i <= COMP_CWORD; i++)); do
+        cur="${COMP_WORDS[i]}"
+        case "${cur}" in
+            -s)
+                where=OPT_SERIAL
+                ;;
+            -p)
+                where=OPT_PATH
+                ;;
+            -*)
+                where=OPTIONS
+                ;;
+            *)
+                if [[ $where == OPT_SERIAL ]]; then
+                    where=OPT_SERIAL_ARG
+                    serial=${cur}
+                else
+                    where=COMMAND
+                    break
+                fi
+                ;;
+        esac
+    done
+
+    if [[ $where == COMMAND && $i -ge $COMP_CWORD ]]; then
+        where=OPTIONS
+    fi
+
+    OPTIONS="-d -e -s -p"
+    COMMAND="devices connect disconnect push pull sync shell emu logcat lolcat forward jdwp install uninstall bugreport help version start-server kill-server get-state get-serialno status-window remount reboot reboot-bootloader root usb tcpip disable-verity"
+
+    case $where in
+        OPTIONS|OPT_SERIAL|OPT_PATH)
+            COMPREPLY=( $(compgen -W "$OPTIONS $COMMAND" -- "$cur") )
+            ;;
+        OPT_SERIAL_ARG)
+            local devices=$(command adb devices 2> /dev/null | grep -v "List of devices" | awk '{ print $1 }')
+            COMPREPLY=( $(compgen -W "${devices}" -- ${cur}) )
+            ;;
+        COMMAND)
+            if [[ $i -eq $COMP_CWORD ]]; then
+                COMPREPLY=( $(compgen -W "$COMMAND" -- "$cur") )
+            else
+                i=$((i+1))
+                case "${cur}" in
+                    install)
+                        _adb_cmd_install "$serial" $i
+                        ;;
+                    sideload)
+                        _adb_cmd_sideload "$serial" $i
+                        ;;
+                    pull)
+                        _adb_cmd_pull "$serial" $i
+                        ;;
+                    push)
+                        _adb_cmd_push "$serial" $i
+                        ;;
+                    reboot)
+                        if [[ $COMP_CWORD == $i ]]; then
+                            args="bootloader recovery"
+                            COMPREPLY=( $(compgen -W "${args}" -- "${COMP_WORDS[i]}") )
+                        fi
+                        ;;
+                    shell)
+                        _adb_cmd_shell "$serial" $i
+                        ;;
+                    uninstall)
+                        _adb_cmd_uninstall "$serial" $i
+                        ;;
+                esac
+            fi
+            ;;
+    esac
+
+    return 0
+}
+
+_adb_cmd_install() {
+    local serial i cur where
+
+    serial=$1
+    i=$2
+
+    where=OPTIONS
+    for ((; i <= COMP_CWORD; i++)); do
+        cur="${COMP_WORDS[i]}"
+        case "${cur}" in
+            -*)
+                where=OPTIONS
+                ;;
+            *)
+                where=FILE
+                break
+                ;;
+        esac
+    done
+
+    cur="${COMP_WORDS[COMP_CWORD]}"
+    if [[ $where == OPTIONS ]]; then
+        COMPREPLY=( $(compgen -W "-d -l -r -s" -- "${cur}") )
+        return
+    fi
+
+    _adb_util_complete_local_file "${cur}" '!*.apk'
+}
+
+_adb_cmd_sideload() {
+    local serial i cur
+
+    serial=$1
+    i=$2
+
+    cur="${COMP_WORDS[COMP_CWORD]}"
+
+    _adb_util_complete_local_file "${cur}" '!*.zip'
+}
+
+_adb_cmd_push() {
+    local serial IFS=$'\n' i cur
+
+    serial=$1
+    i=$2
+
+    cur="${COMP_WORDS[COMP_CWORD]}"
+
+    if [[ $COMP_CWORD == $i ]]; then
+        _adb_util_complete_local_file "${cur}"
+    elif [[ $COMP_CWORD == $(($i+1)) ]]; then
+        if [ "${cur}" == "" ]; then
+            cur="/"
+        fi
+        _adb_util_list_files $serial "${cur}"
+    fi
+}
+
+_adb_cmd_pull() {
+    local serial IFS=$'\n' i cur
+
+    serial=$1
+    i=$2
+
+    cur="${COMP_WORDS[COMP_CWORD]}"
+
+    if [[ $COMP_CWORD == $i ]]; then
+        if [ "${cur}" == "" ]; then
+            cur="/"
+        fi
+        _adb_util_list_files $serial "${cur}"
+    elif [[ $COMP_CWORD == $(($i+1)) ]]; then
+        _adb_util_complete_local_file "${cur}"
+    fi
+}
+
+_adb_cmd_shell() {
+    local serial IFS=$'\n' i cur
+    local -a args
+
+    serial=$1
+    i=$2
+
+    cur="${COMP_WORDS[i]}"
+    if [ "$serial" != "none" ]; then
+        args=(-s $serial)
+    fi
+
+    if [[ $i -eq $COMP_CWORD && ${cur:0:1} != "/" ]]; then
+        paths=$(command adb ${args[@]} shell echo '$'PATH 2> /dev/null | tr -d '\r' | tr : '\n')
+        COMMAND=$(command adb ${args[@]} shell ls $paths '2>' /dev/null | tr -d '\r' | {
+            while read -r tmp; do
+                command=${tmp##*/}
+                printf '%s\n' "$command"
+            done
+        })
+        COMPREPLY=( $(compgen -W "$COMMAND" -- "$cur") )
+        return 0
+    fi
+
+    i=$((i+1))
+    case "$cur" in
+        ls)
+            _adb_shell_file_command $serial $i "--color -A -C -F -H -L -R -S -Z -a -c -d -f -h -i -k -l -m -n -p -q -r -s -t -u -x -1"
+            ;;
+        cat)
+            _adb_shell_file_command $serial $i "-h -e -t -u -v"
+            ;;
+        dumpsys)
+            _adb_cmd_shell_dumpsys "$serial" $i
+            ;;
+        am)
+            _adb_cmd_shell_am "$serial" $i
+            ;;
+        pm)
+            _adb_cmd_shell_pm "$serial" $i
+            ;;
+        /*)
+            _adb_util_list_files $serial "$cur"
+            ;;
+        *)
+            COMPREPLY=( )
+            ;;
+    esac
+
+    return 0
+}
+
+_adb_cmd_shell_dumpsys() {
+    local serial i cur
+    local -a args
+    local candidates
+
+    unset IFS
+
+    serial=$1
+    i=$2
+
+    if [ "$serial" != "none" ]; then
+        args=(-s $serial)
+    fi
+
+    if (( $i == $COMP_CWORD )) ; then
+        cur="${COMP_WORDS[COMP_CWORD]}"
+        # First line is a header, so need "1d".
+        candidates=$(command adb ${args[@]} shell dumpsys -l 2> /dev/null | sed -e '1d;s/^  *//' | tr -d '\r')
+        candidates="-l $candidates"
+        COMPREPLY=( $(compgen -W "$candidates" -- "$cur") )
+        return 0
+    fi
+
+    COMPREPLY=( )
+    return 0
+}
+
+_adb_cmd_shell_am() {
+    local serial i cur
+    local candidates
+
+    unset IFS
+
+    serial=$1
+    i=$2
+
+    if (( $i == $COMP_CWORD )) ; then
+        cur="${COMP_WORDS[COMP_CWORD]}"
+        candidates="broadcast clear-debug-app clear-watch-heap dumpheap force-stop get-config get-inactive hang idle-maintenance instrument kill kill-all monitor package-importance profile restart screen-compat send-trim-memory set-debug-app set-inactive set-watch-heap stack start startservice start-user stopservice stop-user suppress-resize-config-changes switch-user task to-app-uri to-intent-uri to-uri"
+        COMPREPLY=( $(compgen -W "$candidates" -- "$cur") )
+        return 0
+    fi
+
+    COMPREPLY=( )
+    return 0
+}
+
+
+_adb_cmd_shell_pm() {
+    local serial i cur
+    local candidates
+
+    unset IFS
+
+    serial=$1
+    i=$2
+
+    if (( $i == $COMP_CWORD )) ; then
+        cur="${COMP_WORDS[COMP_CWORD]}"
+        candidates="-l -lf -p clear create-user default-state disable"
+        candidates+=" disable-until-used disable-user dump enable"
+        candidates+=" get-app-link get-install-location get-max-users"
+        candidates+=" get-max-running-users grant hide install"
+        candidates+=" install-abandon install-commit install-create"
+        candidates+=" install-write list move-package"
+        candidates+=" move-primary-storage path remove-user"
+        candidates+=" reset-permissions revoke set-app-link"
+        candidates+=" set-installer set-install-location"
+        candidates+=" set-permission-enforced trim-caches unhide"
+        candidates+=" uninstall"
+        COMPREPLY=( $(compgen -W "$candidates" -- "$cur") )
+        return 0
+    fi
+
+    if (( $i + 1 == $COMP_CWORD )) && [[ "${COMP_WORDS[COMP_CWORD -1]}" == "list" ]]  ; then
+        cur="${COMP_WORDS[COMP_CWORD]}"
+        candidates="packages permission-groups permissions instrumentation features libraries users"
+        COMPREPLY=( $(compgen -W "$candidates" -- "$cur") )
+        return 0
+    fi
+
+    COMPREPLY=( )
+    return 0
+}
+
+_adb_cmd_uninstall() {
+    local serial i where cur packages
+
+    serial=$1
+    i=$2
+    if [ "$serial" != "none" ]; then
+        args=(-s $serial)
+    fi
+
+    where=OPTIONS
+    for ((; i <= COMP_CWORD; i++)); do
+        cur="${COMP_WORDS[i]}"
+        case "${cur}" in
+            -*)
+                where=OPTIONS
+                ;;
+            *)
+                where=FILE
+                break
+                ;;
+        esac
+    done
+
+    cur="${COMP_WORDS[COMP_CWORD]}"
+    if [[ $where == OPTIONS ]]; then
+        COMPREPLY=( $(compgen -W "-k" -- "${cur}") )
+    fi
+
+    packages="$(
+        command adb ${args[@]} shell pm list packages '2>' /dev/null 2> /dev/null | tr -d '\r' | {
+            while read -r tmp; do
+                local package=${tmp#package:}
+                echo -n "${package} "
+            done
+        }
+    )"
+
+    COMPREPLY=( ${COMPREPLY[@]:-} $(compgen -W "${packages}" -- "${cur}") )
+}
+
+_adb_shell_file_command() {
+    local serial i cur file options
+    local -a args
+
+    serial=$1
+    i=$2
+    if [ "$serial" != "none" ]; then
+        args=(-s $serial)
+    fi
+    options=$3
+
+    where=OPTIONS
+    for ((; i <= COMP_CWORD; i++)); do
+        cur="${COMP_WORDS[i]}"
+        case "${cur}" in
+            -*)
+                where=OPTIONS
+                ;;
+            *)
+                where=FILE
+                break
+                ;;
+        esac
+    done
+
+    file="${COMP_WORDS[COMP_CWORD]}"
+    if [[ ${file} == "" ]]; then
+        file="/"
+    fi
+
+    case $where in
+        OPTIONS)
+            unset IFS
+            COMPREPLY=( $(compgen -W "$options" -- "$cur") )
+            ;;
+        FILE)
+            _adb_util_list_files $serial "$file"
+            ;;
+    esac
+
+    return 0
+}
+
+_adb_util_list_files() {
+    local serial dir IFS=$'\n'
+    local -a toks
+    local -a args
+
+    serial="$1"
+    file="$2"
+
+    if [ "$serial" != "none" ]; then
+        args=(-s $serial)
+    fi
+
+    if [[ $( command adb ${args[@]} shell ls -dF / '2>/dev/null' | tr -d '\r' ) == "d /" ]] ; then
+        toks=( ${toks[@]-} $(
+            command adb ${args[@]} shell ls -dF ${file}"*" '2>' /dev/null 2> /dev/null | tr -d '\r' | {
+                while read -r tmp; do
+                    filetype=${tmp%% *}
+                    filename=${tmp:${#filetype}+1}
+                    if [[ ${filetype:${#filetype}-1:1} == d ]]; then
+                        printf '%s/\n' "$filename"
+                    else
+                        printf '%s\n' "$filename"
+                    fi
+                done
+            }
+        ))
+    else
+        toks=( ${toks[@]-} $(
+            command adb ${args[@]} shell ls -dp ${file}"*" '2>/dev/null' 2> /dev/null | tr -d '\r'
+        ))
+    fi
+
+    # Since we're probably doing file completion here, don't add a space after.
+    if [[ $(type -t compopt) = "builtin" ]]; then
+        compopt -o nospace
+    fi
+
+    COMPREPLY=( ${COMPREPLY[@]:-} "${toks[@]}" )
+}
+
+_adb_util_complete_local_file()
+{
+    local file xspec i j IFS=$'\n'
+    local -a dirs files
+
+    file=$1
+    xspec=$2
+
+    # Since we're probably doing file completion here, don't add a space after.
+    if [[ $(type -t compopt) = "builtin" ]]; then
+        compopt -o plusdirs
+        if [[ "${xspec}" == "" ]]; then
+            COMPREPLY=( ${COMPREPLY[@]:-} $(compgen -f -- "${cur}") )
+        else
+            compopt +o filenames
+            COMPREPLY=( ${COMPREPLY[@]:-} $(compgen -f -X "${xspec}" -- "${cur}") )
+        fi
+    else
+        # Work-around for shells with no compopt
+
+        dirs=( $(compgen -d -- "${cur}" ) )
+
+        if [[ "${xspec}" == "" ]]; then
+            files=( ${COMPREPLY[@]:-} $(compgen -f -- "${cur}") )
+        else
+            files=( ${COMPREPLY[@]:-} $(compgen -f -X "${xspec}" -- "${cur}") )
+        fi
+
+        COMPREPLY=( $(
+            for i in "${files[@]}"; do
+                local skip=
+                for j in "${dirs[@]}"; do
+                    if [[ $i == $j ]]; then
+                        skip=1
+                        break
+                    fi
+                done
+                [[ -n $skip ]] || printf "%s\n" "$i"
+            done
+        ))
+
+        COMPREPLY=( ${COMPREPLY[@]:-} $(
+            for i in "${dirs[@]}"; do
+                printf "%s/\n" "$i"
+            done
+        ))
+    fi
+}
+
+
+if [[ $(type -t compopt) = "builtin" ]]; then
+    complete -F _adb adb
+else
+    complete -o nospace -F _adb adb
+fi
diff --git a/adb/test_adb.py b/adb/test_adb.py
index e771106..3bb433d 100644
--- a/adb/test_adb.py
+++ b/adb/test_adb.py
@@ -162,15 +162,14 @@
 
         Bug: https://code.google.com/p/android/issues/detail?id=21021
         """
-        port = 12345
-
         with contextlib.closing(
                 socket.socket(socket.AF_INET, socket.SOCK_STREAM)) as listener:
             # Use SO_REUSEADDR so subsequent runs of the test can grab the port
             # even if it is in TIME_WAIT.
             listener.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1)
-            listener.bind(('127.0.0.1', port))
+            listener.bind(('127.0.0.1', 0))
             listener.listen(4)
+            port = listener.getsockname()[1]
 
             # Now that listening has started, start adb emu kill, telling it to
             # connect to our mock emulator.
@@ -233,6 +232,24 @@
                 output.strip(), 'connected to localhost:{}'.format(port))
             s.close()
 
+    def test_already_connected(self):
+        s = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
+        s.bind(('127.0.0.1', 0))
+        s.listen(2)
+
+        port = s.getsockname()[1]
+        output = subprocess.check_output(
+            ['adb', 'connect', 'localhost:{}'.format(port)])
+
+        self.assertEqual(
+            output.strip(), 'connected to localhost:{}'.format(port))
+
+        # b/31250450: this always returns 0 but probably shouldn't.
+        output = subprocess.check_output(
+            ['adb', 'connect', 'localhost:{}'.format(port)])
+
+        self.assertEqual(
+            output.strip(), 'already connected to localhost:{}'.format(port))
 
 def main():
     random.seed(0)
diff --git a/adb/transport.cpp b/adb/transport.cpp
index 37b56e2..2867d38 100644
--- a/adb/transport.cpp
+++ b/adb/transport.cpp
@@ -77,7 +77,15 @@
     Stop();
 }
 
+static void AssumeLocked(std::mutex& mutex) ASSERT_CAPABILITY(mutex) {}
+
 void BlockingConnectionAdapter::Start() {
+    std::lock_guard<std::mutex> lock(mutex_);
+    if (started_) {
+        LOG(FATAL) << "BlockingConnectionAdapter(" << this->transport_name_
+                   << "): started multiple times";
+    }
+
     read_thread_ = std::thread([this]() {
         LOG(INFO) << this->transport_name_ << ": read thread spawning";
         while (true) {
@@ -95,7 +103,11 @@
         LOG(INFO) << this->transport_name_ << ": write thread spawning";
         while (true) {
             std::unique_lock<std::mutex> lock(mutex_);
-            cv_.wait(lock, [this]() { return this->stopped_ || !this->write_queue_.empty(); });
+            cv_.wait(lock, [this]() REQUIRES(mutex_) {
+                return this->stopped_ || !this->write_queue_.empty();
+            });
+
+            AssumeLocked(mutex_);
 
             if (this->stopped_) {
                 return;
@@ -111,25 +123,44 @@
         }
         std::call_once(this->error_flag_, [this]() { this->error_callback_(this, "write failed"); });
     });
+
+    started_ = true;
 }
 
 void BlockingConnectionAdapter::Stop() {
-    std::unique_lock<std::mutex> lock(mutex_);
-    if (stopped_) {
-        LOG(INFO) << "BlockingConnectionAdapter(" << this->transport_name_ << "): already stopped";
-        return;
-    }
+    {
+        std::lock_guard<std::mutex> lock(mutex_);
+        if (!started_) {
+            LOG(INFO) << "BlockingConnectionAdapter(" << this->transport_name_ << "): not started";
+            return;
+        }
 
-    stopped_ = true;
-    lock.unlock();
+        if (stopped_) {
+            LOG(INFO) << "BlockingConnectionAdapter(" << this->transport_name_
+                      << "): already stopped";
+            return;
+        }
+
+        stopped_ = true;
+    }
 
     LOG(INFO) << "BlockingConnectionAdapter(" << this->transport_name_ << "): stopping";
 
     this->underlying_->Close();
-
     this->cv_.notify_one();
-    read_thread_.join();
-    write_thread_.join();
+
+    // Move the threads out into locals with the lock taken, and then unlock to let them exit.
+    std::thread read_thread;
+    std::thread write_thread;
+
+    {
+        std::lock_guard<std::mutex> lock(mutex_);
+        read_thread = std::move(read_thread_);
+        write_thread = std::move(write_thread_);
+    }
+
+    read_thread.join();
+    write_thread.join();
 
     LOG(INFO) << "BlockingConnectionAdapter(" << this->transport_name_ << "): stopped";
     std::call_once(this->error_flag_, [this]() { this->error_callback_(this, "requested stop"); });
@@ -137,7 +168,7 @@
 
 bool BlockingConnectionAdapter::Write(std::unique_ptr<apacket> packet) {
     {
-        std::unique_lock<std::mutex> lock(this->mutex_);
+        std::lock_guard<std::mutex> lock(this->mutex_);
         write_queue_.emplace_back(std::move(packet));
     }
 
diff --git a/adb/transport.h b/adb/transport.h
index 8b71e34..d18c362 100644
--- a/adb/transport.h
+++ b/adb/transport.h
@@ -30,6 +30,7 @@
 #include <thread>
 #include <unordered_set>
 
+#include <android-base/thread_annotations.h>
 #include <openssl/rsa.h>
 
 #include "adb.h"
@@ -121,13 +122,14 @@
     virtual void Start() override final;
     virtual void Stop() override final;
 
-    bool stopped_ = false;
+    bool started_ GUARDED_BY(mutex_) = false;
+    bool stopped_ GUARDED_BY(mutex_) = false;
 
     std::unique_ptr<BlockingConnection> underlying_;
-    std::thread read_thread_;
-    std::thread write_thread_;
+    std::thread read_thread_ GUARDED_BY(mutex_);
+    std::thread write_thread_ GUARDED_BY(mutex_);
 
-    std::deque<std::unique_ptr<apacket>> write_queue_;
+    std::deque<std::unique_ptr<apacket>> write_queue_ GUARDED_BY(mutex_);
     std::mutex mutex_;
     std::condition_variable cv_;
 
diff --git a/fastboot/fastboot.bash b/fastboot/fastboot.bash
new file mode 100644
index 0000000..b91ec72
--- /dev/null
+++ b/fastboot/fastboot.bash
@@ -0,0 +1,182 @@
+# /* vim: set ai ts=4 ft=sh: */
+#
+# Copyright 2017, The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+_fastboot() {
+    if ! type -t "$1" >/dev/null; then
+        return
+    fi
+
+    if type -t _init_completion >/dev/null; then
+        _init_completion || return
+    fi
+
+    local where i cur serial
+    COMPREPLY=()
+
+    serial="${ANDROID_SERIAL:-none}"
+    where=OPTIONS
+    for ((i=1; i <= COMP_CWORD; i++)); do
+        cur="${COMP_WORDS[i]}"
+        case "${cur}" in
+            -s)
+                where=OPT_SERIAL
+                ;;
+            --slot)
+                where=OPT_SLOT
+                ;;
+            -*)
+                where=OPTIONS
+                ;;
+            *)
+                if [[ $where == OPT_SERIAL ]]; then
+                    where=OPT_SERIAL_ARG
+                    serial=${cur}
+                elif [[ $where == OPT_SLOT ]]; then
+                    where=OPT_SLOT_ARG
+                else
+                    where=COMMAND
+                    break
+                fi
+                ;;
+        esac
+    done
+
+    if [[ $where == COMMAND && $i -ge $COMP_CWORD ]]; then
+        where=OPTIONS
+    fi
+
+    OPTIONS="-a -c --disable-verification --disable-verity -h --help -s --set_active --skip-secondary --skip-reboot --slot -u --version -w"
+    COMMAND="continue devices erase flash flashall flashing format getvar get_staged help oem reboot stage update"
+
+    case $where in
+        OPTIONS|OPT_SERIAL)
+            COMPREPLY=( $(compgen -W "$OPTIONS $COMMAND" -- "$cur") )
+            ;;
+        OPT_SERIAL_ARG)
+            local devices=$(command fastboot devices 2> /dev/null | awk '{ print $1 }')
+            COMPREPLY=( $(compgen -W "${devices}" -- ${cur}) )
+            ;;
+        OPT_SLOT_ARG)
+            local slots="a all b other"
+            COMPREPLY=( $(compgen -W "${slots}" -- ${cur}) )
+            ;;
+        COMMAND)
+            if [[ $i -eq $COMP_CWORD ]]; then
+                COMPREPLY=( $(compgen -W "$COMMAND" -- "$cur") )
+            else
+                i=$((i+1))
+                case "${cur}" in
+                    flash)
+                        _fastboot_cmd_flash "$serial" $i
+                        ;;
+                    reboot)
+                        if [[ $COMP_CWORD == $i ]]; then
+                            args="bootloader emergency"
+                            COMPREPLY=( $(compgen -W "${args}" -- "${COMP_WORDS[i]}") )
+                        fi
+                        ;;
+                    update)
+                        _fastboot_cmd_update "$serial" $i
+                        ;;
+                esac
+            fi
+            ;;
+    esac
+
+    return 0
+}
+
+_fastboot_cmd_flash() {
+    local serial i cur
+    local partitions
+
+    serial=$1
+    i=$2
+
+    cur="${COMP_WORDS[COMP_CWORD]}"
+    if [[ $i -eq $COMP_CWORD ]]; then
+        partitions="boot bootloader dtbo modem radio recovery system vbmeta vendor"
+        COMPREPLY=( $(compgen -W "$partitions" -- $cur) )
+    else
+        _fastboot_util_complete_local_file "${cur}" '!*.img'
+    fi
+}
+
+_fastboot_cmd_update() {
+    local serial i cur
+
+    serial=$1
+    i=$2
+
+    cur="${COMP_WORDS[COMP_CWORD]}"
+
+    _fastboot_util_complete_local_file "${cur}" '!*.zip'
+}
+
+_fastboot_util_complete_local_file() {
+    local file xspec i j IFS=$'\n'
+    local -a dirs files
+
+    file=$1
+    xspec=$2
+
+    # Since we're probably doing file completion here, don't add a space after.
+    if [[ $(type -t compopt) = "builtin" ]]; then
+        compopt -o plusdirs
+        if [[ "${xspec}" == "" ]]; then
+            COMPREPLY=( ${COMPREPLY[@]:-} $(compgen -f -- "${cur}") )
+        else
+            compopt +o filenames
+            COMPREPLY=( ${COMPREPLY[@]:-} $(compgen -f -X "${xspec}" -- "${cur}") )
+        fi
+    else
+        # Work-around for shells with no compopt
+
+        dirs=( $(compgen -d -- "${cur}" ) )
+
+        if [[ "${xspec}" == "" ]]; then
+            files=( ${COMPREPLY[@]:-} $(compgen -f -- "${cur}") )
+        else
+            files=( ${COMPREPLY[@]:-} $(compgen -f -X "${xspec}" -- "${cur}") )
+        fi
+
+        COMPREPLY=( $(
+            for i in "${files[@]}"; do
+                local skip=
+                for j in "${dirs[@]}"; do
+                    if [[ $i == $j ]]; then
+                        skip=1
+                        break
+                    fi
+                done
+                [[ -n $skip ]] || printf "%s\n" "$i"
+            done
+        ))
+
+        COMPREPLY=( ${COMPREPLY[@]:-} $(
+            for i in "${dirs[@]}"; do
+                printf "%s/\n" "$i"
+            done
+        ))
+    fi
+}
+
+if [[ $(type -t compopt) = "builtin" ]]; then
+    complete -F _fastboot fastboot
+else
+    complete -o nospace -F _fastboot fastboot
+fi
diff --git a/libbacktrace/UnwindStackMap.cpp b/libbacktrace/UnwindStackMap.cpp
index 9c6fed4..d2d6ab8 100644
--- a/libbacktrace/UnwindStackMap.cpp
+++ b/libbacktrace/UnwindStackMap.cpp
@@ -149,13 +149,12 @@
   }
 
   // Create the process memory from the stack data.
-  uint64_t size = stack.end - stack.start;
-  unwindstack::MemoryBuffer* memory = new unwindstack::MemoryBuffer;
-  memory->Resize(size);
-  memcpy(memory->GetPtr(0), stack.data, size);
-  std::shared_ptr<unwindstack::Memory> shared_memory(memory);
-
-  process_memory_.reset(new unwindstack::MemoryRange(shared_memory, 0, size, stack.start));
+  if (memory_ == nullptr) {
+    memory_ = new unwindstack::MemoryOfflineBuffer(stack.data, stack.start, stack.end);
+    process_memory_.reset(memory_);
+  } else {
+    memory_->Reset(stack.data, stack.start, stack.end);
+  }
   return true;
 }
 
diff --git a/libbacktrace/UnwindStackMap.h b/libbacktrace/UnwindStackMap.h
index ec0d9c1..039f4a2 100644
--- a/libbacktrace/UnwindStackMap.h
+++ b/libbacktrace/UnwindStackMap.h
@@ -79,6 +79,9 @@
   bool Build(const std::vector<backtrace_map_t>& maps);
 
   bool CreateProcessMemory(const backtrace_stackinfo_t& stack);
+
+ private:
+  unwindstack::MemoryOfflineBuffer* memory_ = nullptr;
 };
 
 #endif  // _LIBBACKTRACE_UNWINDSTACK_MAP_H
diff --git a/libunwindstack/Android.bp b/libunwindstack/Android.bp
index 0d43f87..6868f18 100644
--- a/libunwindstack/Android.bp
+++ b/libunwindstack/Android.bp
@@ -155,6 +155,7 @@
         "tests/MemoryFake.cpp",
         "tests/MemoryFileTest.cpp",
         "tests/MemoryLocalTest.cpp",
+        "tests/MemoryOfflineBufferTest.cpp",
         "tests/MemoryOfflineTest.cpp",
         "tests/MemoryRangeTest.cpp",
         "tests/MemoryRemoteTest.cpp",
diff --git a/libunwindstack/Memory.cpp b/libunwindstack/Memory.cpp
index d4ba680..beb2aad 100644
--- a/libunwindstack/Memory.cpp
+++ b/libunwindstack/Memory.cpp
@@ -345,6 +345,25 @@
   return memory_->Read(addr, dst, size);
 }
 
+MemoryOfflineBuffer::MemoryOfflineBuffer(const uint8_t* data, uint64_t start, uint64_t end)
+    : data_(data), start_(start), end_(end) {}
+
+void MemoryOfflineBuffer::Reset(const uint8_t* data, uint64_t start, uint64_t end) {
+  data_ = data;
+  start_ = start;
+  end_ = end;
+}
+
+size_t MemoryOfflineBuffer::Read(uint64_t addr, void* dst, size_t size) {
+  if (addr < start_ || addr >= end_) {
+    return 0;
+  }
+
+  size_t read_length = std::min(size, static_cast<size_t>(end_ - addr));
+  memcpy(dst, &data_[addr - start_], read_length);
+  return read_length;
+}
+
 MemoryOfflineParts::~MemoryOfflineParts() {
   for (auto memory : memories_) {
     delete memory;
diff --git a/libunwindstack/include/unwindstack/Memory.h b/libunwindstack/include/unwindstack/Memory.h
index 19bce04..c0c07f4 100644
--- a/libunwindstack/include/unwindstack/Memory.h
+++ b/libunwindstack/include/unwindstack/Memory.h
@@ -151,6 +151,21 @@
   std::unique_ptr<MemoryRange> memory_;
 };
 
+class MemoryOfflineBuffer : public Memory {
+ public:
+  MemoryOfflineBuffer(const uint8_t* data, uint64_t start, uint64_t end);
+  virtual ~MemoryOfflineBuffer() = default;
+
+  void Reset(const uint8_t* data, uint64_t start, uint64_t end);
+
+  size_t Read(uint64_t addr, void* dst, size_t size) override;
+
+ private:
+  const uint8_t* data_;
+  uint64_t start_;
+  uint64_t end_;
+};
+
 class MemoryOfflineParts : public Memory {
  public:
   MemoryOfflineParts() = default;
diff --git a/libunwindstack/tests/MemoryOfflineBufferTest.cpp b/libunwindstack/tests/MemoryOfflineBufferTest.cpp
new file mode 100644
index 0000000..f022884
--- /dev/null
+++ b/libunwindstack/tests/MemoryOfflineBufferTest.cpp
@@ -0,0 +1,97 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <vector>
+
+#include <gtest/gtest.h>
+
+#include <unwindstack/Memory.h>
+
+#include "LogFake.h"
+
+namespace unwindstack {
+
+class MemoryOfflineBufferTest : public ::testing::Test {
+ protected:
+  void SetUp() override {
+    ResetLogs();
+    memory_.reset(new MemoryOfflineBuffer(buffer_.data(), kStart, kEnd));
+  }
+
+  static void SetUpTestCase() {
+    buffer_.resize(kLength);
+    for (size_t i = 0; i < kLength; i++) {
+      buffer_[i] = i % 189;
+    }
+  }
+
+  std::unique_ptr<MemoryOfflineBuffer> memory_;
+
+  static constexpr size_t kLength = 0x2000;
+  static constexpr uint64_t kStart = 0x1000;
+  static constexpr uint64_t kEnd = kStart + kLength;
+  static std::vector<uint8_t> buffer_;
+};
+
+std::vector<uint8_t> MemoryOfflineBufferTest::buffer_;
+
+static void VerifyBuffer(uint8_t* buffer, size_t start_value, size_t length) {
+  for (size_t i = 0; i < length; i++) {
+    ASSERT_EQ((start_value + i) % 189, buffer[i]) << "Failed at byte " << i;
+  }
+}
+
+TEST_F(MemoryOfflineBufferTest, read_out_of_bounds) {
+  std::vector<uint8_t> buffer(1024);
+  ASSERT_FALSE(memory_->ReadFully(0, buffer.data(), 1));
+  ASSERT_FALSE(memory_->ReadFully(0xfff, buffer.data(), 1));
+  ASSERT_FALSE(memory_->ReadFully(0xfff, buffer.data(), 2));
+  ASSERT_FALSE(memory_->ReadFully(0x3000, buffer.data(), 1));
+  ASSERT_FALSE(memory_->ReadFully(0x3001, buffer.data(), 1));
+}
+
+TEST_F(MemoryOfflineBufferTest, read) {
+  std::vector<uint8_t> buffer(1024);
+  ASSERT_TRUE(memory_->ReadFully(kStart, buffer.data(), 10));
+  ASSERT_NO_FATAL_FAILURE(VerifyBuffer(buffer.data(), 0, 10));
+
+  ASSERT_TRUE(memory_->ReadFully(kStart + 555, buffer.data(), 40));
+  ASSERT_NO_FATAL_FAILURE(VerifyBuffer(buffer.data(), 555, 40));
+
+  ASSERT_TRUE(memory_->ReadFully(kStart + kLength - 105, buffer.data(), 105));
+  ASSERT_NO_FATAL_FAILURE(VerifyBuffer(buffer.data(), kLength - 105, 105));
+}
+
+TEST_F(MemoryOfflineBufferTest, read_past_end) {
+  std::vector<uint8_t> buffer(1024);
+  ASSERT_EQ(100U, memory_->Read(kStart + kLength - 100, buffer.data(), buffer.size()));
+  VerifyBuffer(buffer.data(), kLength - 100, 100);
+}
+
+TEST_F(MemoryOfflineBufferTest, read_after_reset) {
+  std::vector<uint8_t> buffer(1024);
+  ASSERT_TRUE(memory_->ReadFully(kStart, buffer.data(), 100));
+  ASSERT_NO_FATAL_FAILURE(VerifyBuffer(buffer.data(), 0, 100));
+
+  memory_->Reset(&buffer_[10], 0x12000, 0x13000);
+  ASSERT_TRUE(memory_->ReadFully(0x12000, buffer.data(), 100));
+  ASSERT_NO_FATAL_FAILURE(VerifyBuffer(buffer.data(), 10, 100));
+
+  ASSERT_EQ(50U, memory_->Read(0x13000 - 50, buffer.data(), buffer.size()));
+  ASSERT_NO_FATAL_FAILURE(VerifyBuffer(buffer.data(), 0x1000 - 50 + 10, 50));
+}
+
+}  // namespace unwindstack