diff --git a/fastboot/fastboot.cpp b/fastboot/fastboot.cpp
index a29e2d8..6d42e20 100644
--- a/fastboot/fastboot.cpp
+++ b/fastboot/fastboot.cpp
@@ -100,15 +100,20 @@
 };
 
 static struct {
-    char img_name[13];
-    char sig_name[13];
+    char img_name[17];
+    char sig_name[17];
+    char item_name[17];
     char part_name[9];
+    bool active_slot;
     bool is_optional;
 } images[] = {
-    {"boot.img", "boot.sig", "boot", false},
-    {"recovery.img", "recovery.sig", "recovery", true},
-    {"system.img", "system.sig", "system", false},
-    {"vendor.img", "vendor.sig", "vendor", true},
+    {"boot.img",         "boot.sig",         "boot",         "boot",     true,  false},
+    {"boot_other.img",   "boot_other.sig",   "boot_other",   "boot",     false, true},
+    {"recovery.img",     "recovery.sig",     "recovery",     "recovery", true,  true},
+    {"system.img",       "system.sig",       "system",       "system",   true,  false},
+    {"system_other.img", "system_other.sig", "system_other", "system",   false, true},
+    {"vendor.img",       "vendor.sig",       "vendor",       "vendor",   true,  true},
+    {"vendor_other.img", "vendor_other.sig", "vendor_other", "vendor",   false, true},
 };
 
 static std::string find_item(const char* item, const char* product) {
@@ -127,6 +132,12 @@
         fn = "cache.img";
     } else if(!strcmp(item,"info")) {
         fn = "android-info.txt";
+    } else if(!strcmp(item,"system_other")) {
+        fn = "system_other.img";
+    } else if(!strcmp(item,"boot_other")) {
+        fn = "boot_other.img";
+    } else if(!strcmp(item,"vendor_other")) {
+        fn = "vendor_other.img";
     } else {
         fprintf(stderr,"unknown partition '%s'\n", item);
         return "";
@@ -376,9 +387,10 @@
             "                                           added to all partition names that use\n"
             "                                           slots. 'all' can be given to refer\n"
             "                                           to all slots. 'other' can be given to\n"
-            "                                           refer to a non-current slot. If this\n"
-            "                                           flag is not used, slotted partitions\n"
-            "                                           will default to the current active slot.\n"
+            "                                           refer to a non-current slot. 'active' can\n"
+            "                                           be given to refer to a current slot only.\n"
+            "                                           If this flag is not given slots will be\n"
+            "                                           written to based on the filename.\n"
             "  -a, --set-active[=<suffix>]              Sets the active slot. If no suffix is\n"
             "                                           provided, this will default to the value\n"
             "                                           given by --slot. If slots are not\n"
@@ -840,6 +852,11 @@
     }
 }
 
+static bool has_slots(Transport* transport) {
+  std::string suffix_list_unused;
+  return fb_getvar(transport, "slot-suffixes", &suffix_list_unused);
+}
+
 static std::vector<std::string> get_suffixes(Transport* transport) {
     std::vector<std::string> suffixes;
     std::string suffix_list;
@@ -849,6 +866,28 @@
     return android::base::Split(suffix_list, ",");
 }
 
+// Returns a std::string of the slot name 'active_offset' after the active slot
+static std::string get_slot_name(Transport* transport, size_t active_offset) {
+    std::vector<std::string> suffixes = get_suffixes(transport);
+    std::string current_slot;
+    if (!fb_getvar(transport, "current-slot", &current_slot)) {
+        die("Failed to identify current slot.");
+    }
+    if (active_offset >= suffixes.size()) {
+        die("active slot offset larger than total number of slots!");
+    }
+    if (!suffixes.empty()) {
+        for (size_t i = 0; i < suffixes.size(); i++) {
+            if (current_slot == suffixes[i])
+                return suffixes[(i + active_offset) % suffixes.size()];
+        }
+    } else {
+        die("No known slots.");
+    }
+    die("Unable to find current slot");
+    return "";
+}
+
 static std::string verify_slot(Transport* transport, const char *slot, bool allow_all) {
     if (strcmp(slot, "all") == 0) {
         if (allow_all) {
@@ -866,18 +905,9 @@
     std::vector<std::string> suffixes = get_suffixes(transport);
 
     if (strcmp(slot, "other") == 0) {
-        std::string current_slot;
-        if (!fb_getvar(transport, "current-slot", &current_slot)) {
-            die("Failed to identify current slot.");
-        }
-        if (!suffixes.empty()) {
-            for (size_t i = 0; i < suffixes.size(); i++) {
-                if (current_slot == suffixes[i])
-                    return suffixes[(i+1)%suffixes.size()];
-            }
-        } else {
-            die("No known slots.");
-        }
+        return get_slot_name(transport, 1);
+    } else if (strcmp(slot, "active") == 0) {
+        return get_slot_name(transport, 0);
     }
 
     for (const std::string &suffix : suffixes) {
@@ -1036,6 +1066,9 @@
 
 static void do_flashall(Transport* transport, const char* slot_override, int erase_first) {
     queue_info_dump();
+    const bool device_has_slots = has_slots(transport);
+    const bool has_slot_override = slot_override != nullptr && strcmp(slot_override, "") != 0;
+    const bool should_ignore_slots = !device_has_slots || has_slot_override;
 
     fb_queue_query_save("product", cur_product, sizeof(cur_product));
 
@@ -1049,12 +1082,25 @@
     setup_requirements(reinterpret_cast<char*>(data), sz);
 
     for (size_t i = 0; i < ARRAY_SIZE(images); i++) {
-        fname = find_item(images[i].part_name, product);
+        if (should_ignore_slots && !images[i].active_slot) {
+            // We will not do anything with _other files if we are given an explicit slot to use.
+            continue;
+        }
+        fname = find_item(images[i].item_name, product);
         fastboot_buffer buf;
         if (!load_buf(transport, fname.c_str(), &buf)) {
             if (images[i].is_optional) continue;
             die("could not load '%s': %s", images[i].img_name, strerror(errno));
         }
+        // Get the actual slot we are writing to based on the filename. This is because we need to
+        // sometimes write the 'active + 1'th slot for first boot optimization reasons. This is
+        // defined by the images array unless one is explicitly provided.
+        std::string real_slot_override;
+        if (should_ignore_slots) {
+            real_slot_override = slot_override;
+        } else {
+            real_slot_override = get_slot_name(transport, images[i].active_slot ? 0 : 1);
+        }
 
         auto flashall = [&](const std::string &partition) {
             do_send_signature(fname.c_str());
@@ -1063,7 +1109,11 @@
             }
             flash_buf(partition.c_str(), &buf);
         };
-        do_for_partitions(transport, images[i].part_name, slot_override, flashall, false);
+        do_for_partitions(transport,
+                          images[i].part_name,
+                          real_slot_override.c_str(),
+                          flashall,
+                          false);
     }
 }
 
diff --git a/fs_mgr/fs_mgr_fstab.c b/fs_mgr/fs_mgr_fstab.c
index 6d44e06..45adb34 100644
--- a/fs_mgr/fs_mgr_fstab.c
+++ b/fs_mgr/fs_mgr_fstab.c
@@ -32,11 +32,12 @@
     int partnum;
     int swap_prio;
     unsigned int zram_size;
+    unsigned int file_encryption_mode;
 };
 
 struct flag_list {
     const char *name;
-    unsigned flag;
+    unsigned int flag;
 };
 
 static struct flag_list mount_flags[] = {
@@ -63,7 +64,7 @@
     { "check",       MF_CHECK },
     { "encryptable=",MF_CRYPT },
     { "forceencrypt=",MF_FORCECRYPT },
-    { "fileencryption",MF_FILEENCRYPTION },
+    { "fileencryption=",MF_FILEENCRYPTION },
     { "forcefdeorfbe=",MF_FORCEFDEORFBE },
     { "nonremovable",MF_NONREMOVABLE },
     { "voldmanaged=",MF_VOLDMANAGED},
@@ -81,6 +82,15 @@
     { 0,             0 },
 };
 
+#define EM_SOFTWARE 1
+#define EM_ICE      2
+
+static struct flag_list encryption_modes[] = {
+    {"software", EM_SOFTWARE},
+    {"ice", EM_ICE},
+    {0, 0}
+};
+
 static uint64_t calculate_zram_size(unsigned int percentage)
 {
     uint64_t total;
@@ -147,6 +157,21 @@
                      * location of the keys.  Get it and return it.
                      */
                     flag_vals->key_loc = strdup(strchr(p, '=') + 1);
+                    flag_vals->file_encryption_mode = EM_SOFTWARE;
+                } else if ((fl[i].flag == MF_FILEENCRYPTION) && flag_vals) {
+                    /* The fileencryption flag is followed by an = and the
+                     * type of the encryption.  Get it and return it.
+                     */
+                    const struct flag_list *j;
+                    const char *mode = strchr(p, '=') + 1;
+                    for (j = encryption_modes; j->name; ++j) {
+                        if (!strcmp(mode, j->name)) {
+                            flag_vals->file_encryption_mode = j->flag;
+                        }
+                    }
+                    if (flag_vals->file_encryption_mode == 0) {
+                        ERROR("Unknown file encryption mode: %s\n", mode);
+                    }
                 } else if ((fl[i].flag == MF_LENGTH) && flag_vals) {
                     /* The length flag is followed by an = and the
                      * size of the partition.  Get it and return it.
@@ -337,6 +362,7 @@
         fstab->recs[cnt].partnum = flag_vals.partnum;
         fstab->recs[cnt].swap_prio = flag_vals.swap_prio;
         fstab->recs[cnt].zram_size = flag_vals.zram_size;
+        fstab->recs[cnt].file_encryption_mode = flag_vals.file_encryption_mode;
         cnt++;
     }
     /* If an A/B partition, modify block device to be the real block device */
@@ -479,6 +505,17 @@
     return fstab->fs_mgr_flags & MF_FILEENCRYPTION;
 }
 
+const char* fs_mgr_get_file_encryption_mode(const struct fstab_rec *fstab)
+{
+    const struct flag_list *j;
+    for (j = encryption_modes; j->name; ++j) {
+        if (fstab->file_encryption_mode == j->flag) {
+            return j->name;
+        }
+    }
+    return NULL;
+}
+
 int fs_mgr_is_convertible_to_fbe(const struct fstab_rec *fstab)
 {
     return fstab->fs_mgr_flags & MF_FORCEFDEORFBE;
diff --git a/fs_mgr/fs_mgr_verity.cpp b/fs_mgr/fs_mgr_verity.cpp
index 25b023e..759c5e8 100644
--- a/fs_mgr/fs_mgr_verity.cpp
+++ b/fs_mgr/fs_mgr_verity.cpp
@@ -181,7 +181,7 @@
     return -1;
 }
 
-static void verity_ioctl_init(struct dm_ioctl *io, char *name, unsigned flags)
+static void verity_ioctl_init(struct dm_ioctl *io, const char *name, unsigned flags)
 {
     memset(io, 0, DM_BUF_SIZE);
     io->data_size = DM_BUF_SIZE;
@@ -784,8 +784,9 @@
 int fs_mgr_update_verity_state(fs_mgr_verity_state_callback callback)
 {
     alignas(dm_ioctl) char buffer[DM_BUF_SIZE];
+    bool system_root = false;
     char fstab_filename[PROPERTY_VALUE_MAX + sizeof(FSTAB_PREFIX)];
-    char *mount_point;
+    const char *mount_point;
     char propbuf[PROPERTY_VALUE_MAX];
     char *status;
     int fd = -1;
@@ -813,6 +814,9 @@
     property_get("ro.hardware", propbuf, "");
     snprintf(fstab_filename, sizeof(fstab_filename), FSTAB_PREFIX"%s", propbuf);
 
+    property_get("ro.build.system_root_image", propbuf, "");
+    system_root = !strcmp(propbuf, "true");
+
     fstab = fs_mgr_read_fstab(fstab_filename);
 
     if (!fstab) {
@@ -825,7 +829,12 @@
             continue;
         }
 
-        mount_point = basename(fstab->recs[i].mount_point);
+        if (system_root && !strcmp(fstab->recs[i].mount_point, "/")) {
+            mount_point = "system";
+        } else {
+            mount_point = basename(fstab->recs[i].mount_point);
+        }
+
         verity_ioctl_init(io, mount_point, 0);
 
         if (ioctl(fd, DM_TABLE_STATUS, io)) {
@@ -836,7 +845,9 @@
 
         status = &buffer[io->data_start + sizeof(struct dm_target_spec)];
 
-        callback(&fstab->recs[i], mount_point, mode, *status);
+        if (*status == 'C' || *status == 'V') {
+            callback(&fstab->recs[i], mount_point, mode, *status);
+        }
     }
 
     rc = 0;
diff --git a/fs_mgr/include/fs_mgr.h b/fs_mgr/include/fs_mgr.h
index 3847011..6f2548d 100644
--- a/fs_mgr/include/fs_mgr.h
+++ b/fs_mgr/include/fs_mgr.h
@@ -66,6 +66,7 @@
     int partnum;
     int swap_prio;
     unsigned int zram_size;
+    unsigned int file_encryption_mode;
 };
 
 // Callback function for verity status
@@ -86,6 +87,7 @@
 
 #define FS_MGR_DOMNT_FAILED (-1)
 #define FS_MGR_DOMNT_BUSY (-2)
+
 int fs_mgr_do_mount(struct fstab *fstab, char *n_name, char *n_blk_device,
                     char *tmp_mount_point);
 int fs_mgr_do_tmpfs_mount(char *n_name);
@@ -103,6 +105,7 @@
 int fs_mgr_is_verified(const struct fstab_rec *fstab);
 int fs_mgr_is_encryptable(const struct fstab_rec *fstab);
 int fs_mgr_is_file_encrypted(const struct fstab_rec *fstab);
+const char* fs_mgr_get_file_encryption_mode(const struct fstab_rec *fstab);
 int fs_mgr_is_convertible_to_fbe(const struct fstab_rec *fstab);
 int fs_mgr_is_noemulatedsd(const struct fstab_rec *fstab);
 int fs_mgr_is_notrim(struct fstab_rec *fstab);
diff --git a/include/system/graphics.h b/include/system/graphics.h
index a9e451f..529a562 100644
--- a/include/system/graphics.h
+++ b/include/system/graphics.h
@@ -477,6 +477,102 @@
     uint32_t reserved[8];
 };
 
+/*
+ * Structures for describing flexible YUVA/RGBA formats for consumption by
+ * applications. Such flexible formats contain a plane for each component (e.g.
+ * red, green, blue), where each plane is laid out in a grid-like pattern
+ * occupying unique byte addresses and with consistent byte offsets between
+ * neighboring pixels.
+ *
+ * The android_flex_layout structure is used with any pixel format that can be
+ * represented by it, such as:
+ *  - HAL_PIXEL_FORMAT_YCbCr_*_888
+ *  - HAL_PIXEL_FORMAT_FLEX_RGB*_888
+ *  - HAL_PIXEL_FORMAT_RGB[AX]_888[8],BGRA_8888,RGB_888
+ *  - HAL_PIXEL_FORMAT_YV12,Y8,Y16,YCbCr_422_SP/I,YCrCb_420_SP
+ *  - even implementation defined formats that can be represented by
+ *    the structures
+ *
+ * Vertical increment (aka. row increment or stride) describes the distance in
+ * bytes from the first pixel of one row to the first pixel of the next row
+ * (below) for the component plane. This can be negative.
+ *
+ * Horizontal increment (aka. column or pixel increment) describes the distance
+ * in bytes from one pixel to the next pixel (to the right) on the same row for
+ * the component plane. This can be negative.
+ *
+ * Each plane can be subsampled either vertically or horizontally by
+ * a power-of-two factor.
+ *
+ * The bit-depth of each component can be arbitrary, as long as the pixels are
+ * laid out on whole bytes, in native byte-order, using the most significant
+ * bits of each unit.
+ */
+
+typedef enum android_flex_component {
+    /* luma */
+    FLEX_COMPONENT_Y = 1 << 0,
+    /* chroma blue */
+    FLEX_COMPONENT_Cb = 1 << 1,
+    /* chroma red */
+    FLEX_COMPONENT_Cr = 1 << 2,
+
+    /* red */
+    FLEX_COMPONENT_R = 1 << 10,
+    /* green */
+    FLEX_COMPONENT_G = 1 << 11,
+    /* blue */
+    FLEX_COMPONENT_B = 1 << 12,
+
+    /* alpha */
+    FLEX_COMPONENT_A = 1 << 30,
+} android_flex_component_t;
+
+typedef struct android_flex_plane {
+    /* pointer to the first byte of the top-left pixel of the plane. */
+    uint8_t *top_left;
+
+    android_flex_component_t component;
+
+    /* bits allocated for the component in each pixel. Must be a positive
+       multiple of 8. */
+    int32_t bits_per_component;
+    /* number of the most significant bits used in the format for this
+       component. Must be between 1 and bits_per_component, inclusive. */
+    int32_t bits_used;
+
+    /* horizontal increment */
+    int32_t h_increment;
+    /* vertical increment */
+    int32_t v_increment;
+    /* horizontal subsampling. Must be a positive power of 2. */
+    int32_t h_subsampling;
+    /* vertical subsampling. Must be a positive power of 2. */
+    int32_t v_subsampling;
+} android_flex_plane_t;
+
+typedef enum android_flex_format {
+    /* not a flexible format */
+    FLEX_FORMAT_INVALID = 0x0,
+    FLEX_FORMAT_Y = FLEX_COMPONENT_Y,
+    FLEX_FORMAT_YCbCr = FLEX_COMPONENT_Y | FLEX_COMPONENT_Cb | FLEX_COMPONENT_Cr,
+    FLEX_FORMAT_YCbCrA = FLEX_FORMAT_YCbCr | FLEX_COMPONENT_A,
+    FLEX_FORMAT_RGB = FLEX_COMPONENT_R | FLEX_COMPONENT_G | FLEX_COMPONENT_B,
+    FLEX_FORMAT_RGBA = FLEX_FORMAT_RGB | FLEX_COMPONENT_A,
+} android_flex_format_t;
+
+typedef struct android_flex_layout {
+    /* the kind of flexible format */
+    android_flex_format_t format;
+
+    /* number of planes; 0 for FLEX_FORMAT_INVALID */
+    uint32_t num_planes;
+    /* a plane for each component; ordered in increasing component value order.
+       E.g. FLEX_FORMAT_RGBA maps 0 -> R, 1 -> G, etc.
+       Can be NULL for FLEX_FORMAT_INVALID */
+    android_flex_plane_t *planes;
+} android_flex_layout_t;
+
 /**
  * Structure used to define depth point clouds for format HAL_PIXEL_FORMAT_BLOB
  * with dataSpace value of HAL_DATASPACE_DEPTH.
@@ -1039,6 +1135,236 @@
 } android_dataspace_t;
 
 /*
+ * Color modes that may be supported by a display.
+ *
+ * Definitions:
+ * Rendering intent generally defines the goal in mapping a source (input)
+ * color to a destination device color for a given color mode.
+ *
+ *  It is important to keep in mind three cases where mapping may be applied:
+ *  1. The source gamut is much smaller than the destination (display) gamut
+ *  2. The source gamut is much larger than the destination gamut (this will
+ *  ordinarily be handled using colorimetric rendering, below)
+ *  3. The source and destination gamuts are roughly equal, although not
+ *  completely overlapping
+ *  Also, a common requirement for mappings is that skin tones should be
+ *  preserved, or at least remain natural in appearance.
+ *
+ *  Colorimetric Rendering Intent (All cases):
+ *  Colorimetric indicates that colors should be preserved. In the case
+ *  that the source gamut lies wholly within the destination gamut or is
+ *  about the same (#1, #3), this will simply mean that no manipulations
+ *  (no saturation boost, for example) are applied. In the case where some
+ *  source colors lie outside the destination gamut (#2, #3), those will
+ *  need to be mapped to colors that are within the destination gamut,
+ *  while the already in-gamut colors remain unchanged.
+ *
+ *  Non-colorimetric transforms can take many forms. There are no hard
+ *  rules and it's left to the implementation to define.
+ *  Two common intents are described below.
+ *
+ *  Stretched-Gamut Enhancement Intent (Source < Destination):
+ *  When the destination gamut is much larger than the source gamut (#1), the
+ *  source primaries may be redefined to reflect the full extent of the
+ *  destination space, or to reflect an intermediate gamut.
+ *  Skin-tone preservation would likely be applied. An example might be sRGB
+ *  input displayed on a DCI-P3 capable device, with skin-tone preservation.
+ *
+ *  Within-Gamut Enhancement Intent (Source >= Destination):
+ *  When the device (destination) gamut is not larger than the source gamut
+ *  (#2 or #3), but the appearance of a larger gamut is desired, techniques
+ *  such as saturation boost may be applied to the source colors. Skin-tone
+ *  preservation may be applied. There is no unique method for within-gamut
+ *  enhancement; it would be defined within a flexible color mode.
+ *
+ */
+typedef enum android_color_mode {
+
+  /*
+   * HAL_COLOR_MODE_DEFAULT is the "native" gamut of the display.
+   * White Point: Vendor/OEM defined
+   * Panel Gamma: Vendor/OEM defined (typically 2.2)
+   * Rendering Intent: Vendor/OEM defined (typically 'enhanced')
+   */
+  HAL_COLOR_MODE_NATIVE = 0,
+
+  /*
+   * HAL_COLOR_MODE_STANDARD_BT601_625 corresponds with display
+   * settings that implement the ITU-R Recommendation BT.601
+   * or Rec 601. Using 625 line version
+   * Rendering Intent: Colorimetric
+   * Primaries:
+   *                  x       y
+   *  green           0.290   0.600
+   *  blue            0.150   0.060
+   *  red             0.640   0.330
+   *  white (D65)     0.3127  0.3290
+   *
+   *  KR = 0.299, KB = 0.114. This adjusts the luminance interpretation
+   *  for RGB conversion from the one purely determined by the primaries
+   *  to minimize the color shift into RGB space that uses BT.709
+   *  primaries.
+   *
+   * Gamma Correction (GC):
+   *
+   *  if Vlinear < 0.018
+   *    Vnonlinear = 4.500 * Vlinear
+   *  else
+   *    Vnonlinear = 1.099 * (Vlinear)^(0.45) – 0.099
+   */
+  HAL_COLOR_MODE_STANDARD_BT601_625 = 1,
+
+  /*
+   * Primaries:
+   *                  x       y
+   *  green           0.290   0.600
+   *  blue            0.150   0.060
+   *  red             0.640   0.330
+   *  white (D65)     0.3127  0.3290
+   *
+   *  Use the unadjusted KR = 0.222, KB = 0.071 luminance interpretation
+   *  for RGB conversion.
+   *
+   * Gamma Correction (GC):
+   *
+   *  if Vlinear < 0.018
+   *    Vnonlinear = 4.500 * Vlinear
+   *  else
+   *    Vnonlinear = 1.099 * (Vlinear)^(0.45) – 0.099
+   */
+  HAL_COLOR_MODE_STANDARD_BT601_625_UNADJUSTED = 2,
+
+  /*
+   * Primaries:
+   *                  x       y
+   *  green           0.310   0.595
+   *  blue            0.155   0.070
+   *  red             0.630   0.340
+   *  white (D65)     0.3127  0.3290
+   *
+   *  KR = 0.299, KB = 0.114. This adjusts the luminance interpretation
+   *  for RGB conversion from the one purely determined by the primaries
+   *  to minimize the color shift into RGB space that uses BT.709
+   *  primaries.
+   *
+   * Gamma Correction (GC):
+   *
+   *  if Vlinear < 0.018
+   *    Vnonlinear = 4.500 * Vlinear
+   *  else
+   *    Vnonlinear = 1.099 * (Vlinear)^(0.45) – 0.099
+   */
+  HAL_COLOR_MODE_STANDARD_BT601_525 = 3,
+
+  /*
+   * Primaries:
+   *                  x       y
+   *  green           0.310   0.595
+   *  blue            0.155   0.070
+   *  red             0.630   0.340
+   *  white (D65)     0.3127  0.3290
+   *
+   *  Use the unadjusted KR = 0.212, KB = 0.087 luminance interpretation
+   *  for RGB conversion (as in SMPTE 240M).
+   *
+   * Gamma Correction (GC):
+   *
+   *  if Vlinear < 0.018
+   *    Vnonlinear = 4.500 * Vlinear
+   *  else
+   *    Vnonlinear = 1.099 * (Vlinear)^(0.45) – 0.099
+   */
+  HAL_COLOR_MODE_STANDARD_BT601_525_UNADJUSTED = 4,
+
+  /*
+   * HAL_COLOR_MODE_REC709 corresponds with display settings that implement
+   * the ITU-R Recommendation BT.709 / Rec. 709 for high-definition television.
+   * Rendering Intent: Colorimetric
+   * Primaries:
+   *                  x       y
+   *  green           0.300   0.600
+   *  blue            0.150   0.060
+   *  red             0.640   0.330
+   *  white (D65)     0.3127  0.3290
+   *
+   * HDTV REC709 Inverse Gamma Correction (IGC): V represents normalized
+   * (with [0 to 1] range) value of R, G, or B.
+   *
+   *  if Vnonlinear < 0.081
+   *    Vlinear = Vnonlinear / 4.5
+   *  else
+   *    Vlinear = ((Vnonlinear + 0.099) / 1.099) ^ (1/0.45)
+   *
+   * HDTV REC709 Gamma Correction (GC):
+   *
+   *  if Vlinear < 0.018
+   *    Vnonlinear = 4.5 * Vlinear
+   *  else
+   *    Vnonlinear = 1.099 * (Vlinear) ^ 0.45 – 0.099
+   */
+  HAL_COLOR_MODE_STANDARD_BT709 = 5,
+
+  /*
+   * HAL_COLOR_MODE_DCI_P3 corresponds with display settings that implement
+   * SMPTE EG 432-1 and SMPTE RP 431-2
+   * Rendering Intent: Colorimetric
+   * Primaries:
+   *                  x       y
+   *  green           0.265   0.690
+   *  blue            0.150   0.060
+   *  red             0.680   0.320
+   *  white (D65)     0.3127  0.3290
+   *
+   * Gamma: 2.2
+   */
+  HAL_COLOR_MODE_DCI_P3 = 6,
+
+  /*
+   * HAL_COLOR_MODE_SRGB corresponds with display settings that implement
+   * the sRGB color space. Uses the same primaries as ITU-R Recommendation
+   * BT.709
+   * Rendering Intent: Colorimetric
+   * Primaries:
+   *                  x       y
+   *  green           0.300   0.600
+   *  blue            0.150   0.060
+   *  red             0.640   0.330
+   *  white (D65)     0.3127  0.3290
+   *
+   * PC/Internet (sRGB) Inverse Gamma Correction (IGC):
+   *
+   *  if Vnonlinear ≤ 0.03928
+   *    Vlinear = Vnonlinear / 12.92
+   *  else
+   *    Vlinear = ((Vnonlinear + 0.055)/1.055) ^ 2.4
+   *
+   * PC/Internet (sRGB) Gamma Correction (GC):
+   *
+   *  if Vlinear ≤ 0.0031308
+   *    Vnonlinear = 12.92 * Vlinear
+   *  else
+   *    Vnonlinear = 1.055 * (Vlinear)^(1/2.4) – 0.055
+   */
+  HAL_COLOR_MODE_SRGB = 7,
+
+  /*
+   * HAL_COLOR_MODE_ADOBE_RGB corresponds with the RGB color space developed
+   * by Adobe Systems, Inc. in 1998.
+   * Rendering Intent: Colorimetric
+   * Primaries:
+   *                  x       y
+   *  green           0.210   0.710
+   *  blue            0.150   0.060
+   *  red             0.640   0.330
+   *  white (D65)     0.3127  0.3290
+   *
+   * Gamma: 2.2
+   */
+  HAL_COLOR_MODE_ADOBE_RGB = 8
+
+} android_color_mode_t;
+
+/*
  * Color transforms that may be applied by hardware composer to the whole
  * display.
  */
diff --git a/include/system/window.h b/include/system/window.h
index b8f33ff..44bfc9b 100644
--- a/include/system/window.h
+++ b/include/system/window.h
@@ -314,6 +314,7 @@
     NATIVE_WINDOW_SET_SURFACE_DAMAGE        = 20,   /* private */
     NATIVE_WINDOW_SET_SHARED_BUFFER_MODE    = 21,
     NATIVE_WINDOW_SET_AUTO_REFRESH          = 22,
+    NATIVE_WINDOW_GET_FRAME_TIMESTAMPS      = 23,
 };
 
 /* parameter for NATIVE_WINDOW_[API_][DIS]CONNECT */
@@ -976,6 +977,18 @@
     return window->perform(window, NATIVE_WINDOW_SET_AUTO_REFRESH, autoRefresh);
 }
 
+static inline int native_window_get_frame_timestamps(
+        struct ANativeWindow* window, uint32_t framesAgo,
+        int64_t* outPostedTime, int64_t* outAcquireTime,
+        int64_t* outRefreshStartTime, int64_t* outGlCompositionDoneTime,
+        int64_t* outDisplayRetireTime, int64_t* outReleaseTime)
+{
+    return window->perform(window, NATIVE_WINDOW_GET_FRAME_TIMESTAMPS,
+            framesAgo, outPostedTime, outAcquireTime, outRefreshStartTime,
+            outGlCompositionDoneTime, outDisplayRetireTime, outReleaseTime);
+}
+
+
 __END_DECLS
 
 #endif /* SYSTEM_CORE_INCLUDE_ANDROID_WINDOW_H */
diff --git a/libcutils/sched_policy.c b/libcutils/sched_policy.c
index 884ee17..017f3be 100644
--- a/libcutils/sched_policy.c
+++ b/libcutils/sched_policy.c
@@ -294,7 +294,7 @@
     case SP_AUDIO_APP:
     case SP_AUDIO_SYS:
         fd = fg_cpuset_fd;
-        boost_fd = fg_schedboost_fd;
+        boost_fd = bg_schedboost_fd;
         break;
     case SP_TOP_APP :
         fd = ta_cpuset_fd;
diff --git a/rootdir/Android.mk b/rootdir/Android.mk
index d53af2f..94f5cb7 100644
--- a/rootdir/Android.mk
+++ b/rootdir/Android.mk
@@ -26,6 +26,7 @@
 #######################################
 # asan.options
 ifneq ($(filter address,$(SANITIZE_TARGET)),)
+
 include $(CLEAR_VARS)
 
 LOCAL_MODULE := asan.options
@@ -34,6 +35,72 @@
 LOCAL_MODULE_PATH := $(TARGET_OUT)
 
 include $(BUILD_PREBUILT)
+
+# Modules for asan.options.X files.
+
+ASAN_OPTIONS_FILES :=
+
+define create-asan-options-module
+include $$(CLEAR_VARS)
+LOCAL_MODULE := asan.options.$(1)
+ASAN_OPTIONS_FILES += asan.options.$(1)
+LOCAL_MODULE_CLASS := ETC
+# The asan.options.off.template tries to turn off as much of ASAN as is possible.
+LOCAL_SRC_FILES := asan.options.off.template
+LOCAL_MODULE_PATH := $(TARGET_OUT)
+include $$(BUILD_PREBUILT)
+endef
+
+# Pretty comprehensive set of native services. This list is helpful if all that's to be checked is an
+# app.
+ifeq ($(SANITIZE_LITE),true)
+SANITIZE_ASAN_OPTIONS_FOR := \
+  adbd \
+  ATFWD-daemon \
+  audioserver \
+  bridgemgrd \
+  cameraserver \
+  cnd \
+  debuggerd \
+  debuggerd64 \
+  dex2oat \
+  drmserver \
+  fingerprintd \
+  gatekeeperd \
+  installd \
+  keystore \
+  lmkd \
+  logcat \
+  logd \
+  lowi-server \
+  media.codec \
+  mediadrmserver \
+  media.extractor \
+  mediaserver \
+  mm-qcamera-daemon \
+  mpdecision \
+  netmgrd \
+  perfd \
+  perfprofd \
+  qmuxd \
+  qseecomd \
+  rild \
+  sdcard \
+  servicemanager \
+  slim_daemon \
+  surfaceflinger \
+  thermal-engine \
+  time_daemon \
+  update_engine \
+  vold \
+  wpa_supplicant \
+  zip
+endif
+
+ifneq ($(SANITIZE_ASAN_OPTIONS_FOR),)
+  $(foreach binary, $(SANITIZE_ASAN_OPTIONS_FOR), $(eval $(call create-asan-options-module,$(binary))))
+endif
+
 endif
 
 #######################################
@@ -47,14 +114,14 @@
 EXPORT_GLOBAL_ASAN_OPTIONS :=
 ifneq ($(filter address,$(SANITIZE_TARGET)),)
   EXPORT_GLOBAL_ASAN_OPTIONS := export ASAN_OPTIONS include=/system/asan.options
-  LOCAL_REQUIRED_MODULES := asan.options
+  LOCAL_REQUIRED_MODULES := asan.options $(ASAN_OPTIONS_FILES)
 endif
 # Put it here instead of in init.rc module definition,
 # because init.rc is conditionally included.
 #
 # create some directories (some are mount points) and symlinks
 LOCAL_POST_INSTALL_CMD := mkdir -p $(addprefix $(TARGET_ROOT_OUT)/, \
-    sbin dev proc sys system data oem acct cache config storage mnt root $(BOARD_ROOT_EXTRA_FOLDERS)); \
+    sbin dev proc sys system data oem acct config storage mnt root $(BOARD_ROOT_EXTRA_FOLDERS)); \
     ln -sf /system/etc $(TARGET_ROOT_OUT)/etc; \
     ln -sf /sys/kernel/debug $(TARGET_ROOT_OUT)/d; \
     ln -sf /storage/self/primary $(TARGET_ROOT_OUT)/sdcard
@@ -63,6 +130,11 @@
 else
   LOCAL_POST_INSTALL_CMD += ; ln -sf /system/vendor $(TARGET_ROOT_OUT)/vendor
 endif
+ifdef BOARD_CACHEIMAGE_FILE_SYSTEM_TYPE
+  LOCAL_POST_INSTALL_CMD += ; mkdir -p $(TARGET_ROOT_OUT)/cache
+else
+  LOCAL_POST_INSTALL_CMD += ; ln -sf /data/cache $(TARGET_ROOT_OUT)/cache
+endif
 ifdef BOARD_ROOT_EXTRA_SYMLINKS
 # BOARD_ROOT_EXTRA_SYMLINKS is a list of <target>:<link_name>.
   LOCAL_POST_INSTALL_CMD += $(foreach s, $(BOARD_ROOT_EXTRA_SYMLINKS),\
diff --git a/rootdir/asan.options b/rootdir/asan.options
index 43896a1..70e0eca 100644
--- a/rootdir/asan.options
+++ b/rootdir/asan.options
@@ -3,3 +3,4 @@
 alloc_dealloc_mismatch=0
 allocator_may_return_null=1
 detect_container_overflow=0
+include_if_exists=/system/asan.options.%b
diff --git a/rootdir/asan.options.off.template b/rootdir/asan.options.off.template
new file mode 100644
index 0000000..59a1249
--- /dev/null
+++ b/rootdir/asan.options.off.template
@@ -0,0 +1,7 @@
+quarantine_size_mb=0
+max_redzone=16
+poison_heap=false
+poison_partial=false
+poison_array_cookie=false
+alloc_dealloc_mismatch=false
+new_delete_type_mismatch=false
diff --git a/rootdir/init.rc b/rootdir/init.rc
index 7b24dd3..7d8eed5 100644
--- a/rootdir/init.rc
+++ b/rootdir/init.rc
@@ -395,6 +395,10 @@
     # create the A/B OTA directory, so as to enforce our permissions
     mkdir /data/ota 0771 root root
 
+    # create the OTA package directory. It will be accessed by GmsCore (cache
+    # group), update_engine and update_verifier.
+    mkdir /data/ota_package 0770 system cache
+
     # create resource-cache and double-check the perms
     mkdir /data/resource-cache 0771 system system
     chown system system /data/resource-cache
diff --git a/rootdir/init.zygote32.rc b/rootdir/init.zygote32.rc
index 807f9bc..2d7d5c2 100644
--- a/rootdir/init.zygote32.rc
+++ b/rootdir/init.zygote32.rc
@@ -8,4 +8,4 @@
     onrestart restart cameraserver
     onrestart restart media
     onrestart restart netd
-    writepid /dev/cpuset/foreground/tasks /dev/stune/foreground/tasks
+    writepid /dev/cpuset/foreground/tasks
diff --git a/rootdir/init.zygote32_64.rc b/rootdir/init.zygote32_64.rc
index 10fa915..a5e32c2 100644
--- a/rootdir/init.zygote32_64.rc
+++ b/rootdir/init.zygote32_64.rc
@@ -8,11 +8,11 @@
     onrestart restart cameraserver
     onrestart restart media
     onrestart restart netd
-    writepid /dev/cpuset/foreground/tasks /sys/fs/cgroup/stune/foreground/tasks
+    writepid /dev/cpuset/foreground/tasks
 
 service zygote_secondary /system/bin/app_process64 -Xzygote /system/bin --zygote --socket-name=zygote_secondary
     class main
     priority -20
     socket zygote_secondary stream 660 root system
     onrestart restart zygote
-    writepid /dev/cpuset/foreground/tasks /dev/stune/foreground/tasks
+    writepid /dev/cpuset/foreground/tasks
diff --git a/rootdir/init.zygote64.rc b/rootdir/init.zygote64.rc
index 13ffd7e..8584cbb 100644
--- a/rootdir/init.zygote64.rc
+++ b/rootdir/init.zygote64.rc
@@ -8,4 +8,4 @@
     onrestart restart cameraserver
     onrestart restart media
     onrestart restart netd
-    writepid /dev/cpuset/foreground/tasks /dev/stune/foreground/tasks
+    writepid /dev/cpuset/foreground/tasks
diff --git a/rootdir/init.zygote64_32.rc b/rootdir/init.zygote64_32.rc
index 1164ac5..4a32097 100644
--- a/rootdir/init.zygote64_32.rc
+++ b/rootdir/init.zygote64_32.rc
@@ -8,11 +8,11 @@
     onrestart restart cameraserver
     onrestart restart media
     onrestart restart netd
-    writepid /dev/cpuset/foreground/tasks /sys/fs/cgroup/stune/foreground/tasks
+    writepid /dev/cpuset/foreground/tasks
 
 service zygote_secondary /system/bin/app_process32 -Xzygote /system/bin --zygote --socket-name=zygote_secondary
     class main
     priority -20
     socket zygote_secondary stream 660 root system
     onrestart restart zygote
-    writepid /dev/cpuset/foreground/tasks /dev/stune/foreground/tasks
+    writepid /dev/cpuset/foreground/tasks