diff --git a/include/system/graphics-base.h b/include/system/graphics-base.h
new file mode 100644
index 0000000..cebd2f9
--- /dev/null
+++ b/include/system/graphics-base.h
@@ -0,0 +1,120 @@
+// This file is autogenerated by hidl-gen. Do not edit manually.
+
+#ifndef HIDL_GENERATED_android_hardware_graphics_common_V1_0_EXPORTED_CONSTANTS_H_
+#define HIDL_GENERATED_android_hardware_graphics_common_V1_0_EXPORTED_CONSTANTS_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+    HAL_PIXEL_FORMAT_RGBA_8888 = 1,
+    HAL_PIXEL_FORMAT_RGBX_8888 = 2,
+    HAL_PIXEL_FORMAT_RGB_888 = 3,
+    HAL_PIXEL_FORMAT_RGB_565 = 4,
+    HAL_PIXEL_FORMAT_BGRA_8888 = 5,
+    HAL_PIXEL_FORMAT_YV12 = 842094169, // 0x32315659
+    HAL_PIXEL_FORMAT_Y8 = 538982489, // 0x20203859
+    HAL_PIXEL_FORMAT_Y16 = 540422489, // 0x20363159
+    HAL_PIXEL_FORMAT_RAW16 = 32, // 0x20
+    HAL_PIXEL_FORMAT_RAW10 = 37, // 0x25
+    HAL_PIXEL_FORMAT_RAW12 = 38, // 0x26
+    HAL_PIXEL_FORMAT_RAW_OPAQUE = 36, // 0x24
+    HAL_PIXEL_FORMAT_BLOB = 33, // 0x21
+    HAL_PIXEL_FORMAT_IMPLEMENTATION_DEFINED = 34, // 0x22
+    HAL_PIXEL_FORMAT_YCBCR_420_888 = 35, // 0x23
+    HAL_PIXEL_FORMAT_YCBCR_422_888 = 39, // 0x27
+    HAL_PIXEL_FORMAT_YCBCR_444_888 = 40, // 0x28
+    HAL_PIXEL_FORMAT_FLEX_RGB_888 = 41, // 0x29
+    HAL_PIXEL_FORMAT_FLEX_RGBA_8888 = 42, // 0x2A
+    HAL_PIXEL_FORMAT_YCBCR_422_SP = 16, // 0x10
+    HAL_PIXEL_FORMAT_YCRCB_420_SP = 17, // 0x11
+    HAL_PIXEL_FORMAT_YCBCR_422_I = 20, // 0x14
+} android_pixel_format_t;
+
+typedef enum {
+    HAL_TRANSFORM_FLIP_H = 1, // 0x01
+    HAL_TRANSFORM_FLIP_V = 2, // 0x02
+    HAL_TRANSFORM_ROT_90 = 4, // 0x04
+    HAL_TRANSFORM_ROT_180 = 3, // 0x03
+    HAL_TRANSFORM_ROT_270 = 7, // 0x07
+} android_transform_t;
+
+typedef enum {
+    HAL_DATASPACE_UNKNOWN = 0, // 0x0
+    HAL_DATASPACE_ARBITRARY = 1, // 0x1
+    HAL_DATASPACE_STANDARD_SHIFT = 16,
+    HAL_DATASPACE_STANDARD_MASK = 4128768, // (63 << STANDARD_SHIFT)
+    HAL_DATASPACE_STANDARD_UNSPECIFIED = 0, // (0 << STANDARD_SHIFT)
+    HAL_DATASPACE_STANDARD_BT709 = 65536, // (1 << STANDARD_SHIFT)
+    HAL_DATASPACE_STANDARD_BT601_625 = 131072, // (2 << STANDARD_SHIFT)
+    HAL_DATASPACE_STANDARD_BT601_625_UNADJUSTED = 196608, // (3 << STANDARD_SHIFT)
+    HAL_DATASPACE_STANDARD_BT601_525 = 262144, // (4 << STANDARD_SHIFT)
+    HAL_DATASPACE_STANDARD_BT601_525_UNADJUSTED = 327680, // (5 << STANDARD_SHIFT)
+    HAL_DATASPACE_STANDARD_BT2020 = 393216, // (6 << STANDARD_SHIFT)
+    HAL_DATASPACE_STANDARD_BT2020_CONSTANT_LUMINANCE = 458752, // (7 << STANDARD_SHIFT)
+    HAL_DATASPACE_STANDARD_BT470M = 524288, // (8 << STANDARD_SHIFT)
+    HAL_DATASPACE_STANDARD_FILM = 589824, // (9 << STANDARD_SHIFT)
+    HAL_DATASPACE_TRANSFER_SHIFT = 22,
+    HAL_DATASPACE_TRANSFER_MASK = 130023424, // (31 << TRANSFER_SHIFT)
+    HAL_DATASPACE_TRANSFER_UNSPECIFIED = 0, // (0 << TRANSFER_SHIFT)
+    HAL_DATASPACE_TRANSFER_LINEAR = 4194304, // (1 << TRANSFER_SHIFT)
+    HAL_DATASPACE_TRANSFER_SRGB = 8388608, // (2 << TRANSFER_SHIFT)
+    HAL_DATASPACE_TRANSFER_SMPTE_170M = 12582912, // (3 << TRANSFER_SHIFT)
+    HAL_DATASPACE_TRANSFER_GAMMA2_2 = 16777216, // (4 << TRANSFER_SHIFT)
+    HAL_DATASPACE_TRANSFER_GAMMA2_8 = 20971520, // (5 << TRANSFER_SHIFT)
+    HAL_DATASPACE_TRANSFER_ST2084 = 25165824, // (6 << TRANSFER_SHIFT)
+    HAL_DATASPACE_TRANSFER_HLG = 29360128, // (7 << TRANSFER_SHIFT)
+    HAL_DATASPACE_RANGE_SHIFT = 27,
+    HAL_DATASPACE_RANGE_MASK = 939524096, // (7 << RANGE_SHIFT)
+    HAL_DATASPACE_RANGE_UNSPECIFIED = 0, // (0 << RANGE_SHIFT)
+    HAL_DATASPACE_RANGE_FULL = 134217728, // (1 << RANGE_SHIFT)
+    HAL_DATASPACE_RANGE_LIMITED = 268435456, // (2 << RANGE_SHIFT)
+    HAL_DATASPACE_SRGB_LINEAR = 512, // 0x200
+    HAL_DATASPACE_V0_SRGB_LINEAR = 138477568, // ((STANDARD_BT709 | TRANSFER_LINEAR) | RANGE_FULL)
+    HAL_DATASPACE_SRGB = 513, // 0x201
+    HAL_DATASPACE_V0_SRGB = 142671872, // ((STANDARD_BT709 | TRANSFER_SRGB) | RANGE_FULL)
+    HAL_DATASPACE_JFIF = 257, // 0x101
+    HAL_DATASPACE_V0_JFIF = 146931712, // ((STANDARD_BT601_625 | TRANSFER_SMPTE_170M) | RANGE_FULL)
+    HAL_DATASPACE_BT601_625 = 258, // 0x102
+    HAL_DATASPACE_V0_BT601_625 = 281149440, // ((STANDARD_BT601_625 | TRANSFER_SMPTE_170M) | RANGE_LIMITED)
+    HAL_DATASPACE_BT601_525 = 259, // 0x103
+    HAL_DATASPACE_V0_BT601_525 = 281280512, // ((STANDARD_BT601_525 | TRANSFER_SMPTE_170M) | RANGE_LIMITED)
+    HAL_DATASPACE_BT709 = 260, // 0x104
+    HAL_DATASPACE_V0_BT709 = 281083904, // ((STANDARD_BT709 | TRANSFER_SMPTE_170M) | RANGE_LIMITED)
+    HAL_DATASPACE_DEPTH = 4096, // 0x1000
+} android_dataspace_t;
+
+typedef enum {
+    HAL_COLOR_MODE_NATIVE = 0,
+    HAL_COLOR_MODE_STANDARD_BT601_625 = 1,
+    HAL_COLOR_MODE_STANDARD_BT601_625_UNADJUSTED = 2,
+    HAL_COLOR_MODE_STANDARD_BT601_525 = 3,
+    HAL_COLOR_MODE_STANDARD_BT601_525_UNADJUSTED = 4,
+    HAL_COLOR_MODE_STANDARD_BT709 = 5,
+    HAL_COLOR_MODE_DCI_P3 = 6,
+    HAL_COLOR_MODE_SRGB = 7,
+    HAL_COLOR_MODE_ADOBE_RGB = 8,
+} android_color_mode_t;
+
+typedef enum {
+    HAL_COLOR_TRANSFORM_IDENTITY = 0,
+    HAL_COLOR_TRANSFORM_ARBITRARY_MATRIX = 1,
+    HAL_COLOR_TRANSFORM_VALUE_INVERSE = 2,
+    HAL_COLOR_TRANSFORM_GRAYSCALE = 3,
+    HAL_COLOR_TRANSFORM_CORRECT_PROTANOPIA = 4,
+    HAL_COLOR_TRANSFORM_CORRECT_DEUTERANOPIA = 5,
+    HAL_COLOR_TRANSFORM_CORRECT_TRITANOPIA = 6,
+} android_color_transform_t;
+
+typedef enum {
+    HAL_HDR_DOLBY_VISION = 1,
+    HAL_HDR_HDR10 = 2,
+    HAL_HDR_HLG = 3,
+} android_hdr_t;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif  // HIDL_GENERATED_android_hardware_graphics_common_V1_0_EXPORTED_CONSTANTS_H_
diff --git a/include/system/graphics.h b/include/system/graphics.h
index ae10fa0..449b8c7 100644
--- a/include/system/graphics.h
+++ b/include/system/graphics.h
@@ -20,10 +20,30 @@
 #include <stddef.h>
 #include <stdint.h>
 
+/*
+ * Some of the enums are now defined in HIDL in hardware/interfaces and are
+ * generated.
+ */
+#include "graphics-base.h"
+
 #ifdef __cplusplus
 extern "C" {
 #endif
 
+/* for compatibility */
+#define HAL_PIXEL_FORMAT_YCbCr_420_888 HAL_PIXEL_FORMAT_YCBCR_420_888
+#define HAL_PIXEL_FORMAT_YCbCr_422_888 HAL_PIXEL_FORMAT_YCBCR_422_888
+#define HAL_PIXEL_FORMAT_YCbCr_444_888 HAL_PIXEL_FORMAT_YCBCR_444_888
+#define HAL_PIXEL_FORMAT_YCbCr_422_SP HAL_PIXEL_FORMAT_YCBCR_422_SP
+#define HAL_PIXEL_FORMAT_YCrCb_420_SP HAL_PIXEL_FORMAT_YCRCB_420_SP
+#define HAL_PIXEL_FORMAT_YCbCr_422_I HAL_PIXEL_FORMAT_YCBCR_422_I
+typedef android_pixel_format_t android_pixel_format;
+typedef android_transform_t android_transform;
+typedef android_dataspace_t android_dataspace;
+typedef android_color_mode_t android_color_mode;
+typedef android_color_transform_t android_color_transform;
+typedef android_hdr_t android_hdr;
+
 /*
  * If the HAL needs to create service threads to handle graphics related
  * tasks, these threads need to run at HAL_PRIORITY_URGENT_DISPLAY priority
@@ -38,411 +58,6 @@
 
 #define HAL_PRIORITY_URGENT_DISPLAY     (-8)
 
-/**
- * pixel format definitions
- */
-
-typedef enum android_pixel_format {
-    /*
-     * "linear" color pixel formats:
-     *
-     * When used with ANativeWindow, the dataSpace field describes the color
-     * space of the buffer.
-     *
-     * The color space determines, for example, if the formats are linear or
-     * gamma-corrected; or whether any special operations are performed when
-     * reading or writing into a buffer in one of these formats.
-     */
-    HAL_PIXEL_FORMAT_RGBA_8888          = 1,
-    HAL_PIXEL_FORMAT_RGBX_8888          = 2,
-    HAL_PIXEL_FORMAT_RGB_888            = 3,
-    HAL_PIXEL_FORMAT_RGB_565            = 4,
-    HAL_PIXEL_FORMAT_BGRA_8888          = 5,
-
-    /*
-     * 0x100 - 0x1FF
-     *
-     * This range is reserved for pixel formats that are specific to the HAL
-     * implementation.  Implementations can use any value in this range to
-     * communicate video pixel formats between their HAL modules.  These formats
-     * must not have an alpha channel.  Additionally, an EGLimage created from a
-     * gralloc buffer of one of these formats must be supported for use with the
-     * GL_OES_EGL_image_external OpenGL ES extension.
-     */
-
-    /*
-     * Android YUV format:
-     *
-     * This format is exposed outside of the HAL to software decoders and
-     * applications.  EGLImageKHR must support it in conjunction with the
-     * OES_EGL_image_external extension.
-     *
-     * YV12 is a 4:2:0 YCrCb planar format comprised of a WxH Y plane followed
-     * by (W/2) x (H/2) Cr and Cb planes.
-     *
-     * This format assumes
-     * - an even width
-     * - an even height
-     * - a horizontal stride multiple of 16 pixels
-     * - a vertical stride equal to the height
-     *
-     *   y_size = stride * height
-     *   c_stride = ALIGN(stride/2, 16)
-     *   c_size = c_stride * height/2
-     *   size = y_size + c_size * 2
-     *   cr_offset = y_size
-     *   cb_offset = y_size + c_size
-     *
-     * When used with ANativeWindow, the dataSpace field describes the color
-     * space of the buffer.
-     */
-    HAL_PIXEL_FORMAT_YV12   = 0x32315659, // YCrCb 4:2:0 Planar
-
-
-    /*
-     * Android Y8 format:
-     *
-     * This format is exposed outside of the HAL to the framework.
-     * The expected gralloc usage flags are SW_* and HW_CAMERA_*,
-     * and no other HW_ flags will be used.
-     *
-     * Y8 is a YUV planar format comprised of a WxH Y plane,
-     * with each pixel being represented by 8 bits.
-     *
-     * It is equivalent to just the Y plane from YV12.
-     *
-     * This format assumes
-     * - an even width
-     * - an even height
-     * - a horizontal stride multiple of 16 pixels
-     * - a vertical stride equal to the height
-     *
-     *   size = stride * height
-     *
-     * When used with ANativeWindow, the dataSpace field describes the color
-     * space of the buffer.
-     */
-    HAL_PIXEL_FORMAT_Y8     = 0x20203859,
-
-    /*
-     * Android Y16 format:
-     *
-     * This format is exposed outside of the HAL to the framework.
-     * The expected gralloc usage flags are SW_* and HW_CAMERA_*,
-     * and no other HW_ flags will be used.
-     *
-     * Y16 is a YUV planar format comprised of a WxH Y plane,
-     * with each pixel being represented by 16 bits.
-     *
-     * It is just like Y8, but has double the bits per pixel (little endian).
-     *
-     * This format assumes
-     * - an even width
-     * - an even height
-     * - a horizontal stride multiple of 16 pixels
-     * - a vertical stride equal to the height
-     * - strides are specified in pixels, not in bytes
-     *
-     *   size = stride * height * 2
-     *
-     * When used with ANativeWindow, the dataSpace field describes the color
-     * space of the buffer, except that dataSpace field
-     * HAL_DATASPACE_DEPTH indicates that this buffer contains a depth
-     * image where each sample is a distance value measured by a depth camera,
-     * plus an associated confidence value.
-     */
-    HAL_PIXEL_FORMAT_Y16    = 0x20363159,
-
-    /*
-     * Android RAW sensor format:
-     *
-     * This format is exposed outside of the camera HAL to applications.
-     *
-     * RAW16 is a single-channel, 16-bit, little endian format, typically
-     * representing raw Bayer-pattern images from an image sensor, with minimal
-     * processing.
-     *
-     * The exact pixel layout of the data in the buffer is sensor-dependent, and
-     * needs to be queried from the camera device.
-     *
-     * Generally, not all 16 bits are used; more common values are 10 or 12
-     * bits. If not all bits are used, the lower-order bits are filled first.
-     * All parameters to interpret the raw data (black and white points,
-     * color space, etc) must be queried from the camera device.
-     *
-     * This format assumes
-     * - an even width
-     * - an even height
-     * - a horizontal stride multiple of 16 pixels
-     * - a vertical stride equal to the height
-     * - strides are specified in pixels, not in bytes
-     *
-     *   size = stride * height * 2
-     *
-     * This format must be accepted by the gralloc module when used with the
-     * following usage flags:
-     *    - GRALLOC_USAGE_HW_CAMERA_*
-     *    - GRALLOC_USAGE_SW_*
-     *    - GRALLOC_USAGE_RENDERSCRIPT
-     *
-     * When used with ANativeWindow, the dataSpace should be
-     * HAL_DATASPACE_ARBITRARY, as raw image sensor buffers require substantial
-     * extra metadata to define.
-     */
-    HAL_PIXEL_FORMAT_RAW16 = 0x20,
-
-    /*
-     * Android RAW10 format:
-     *
-     * This format is exposed outside of the camera HAL to applications.
-     *
-     * RAW10 is a single-channel, 10-bit per pixel, densely packed in each row,
-     * unprocessed format, usually representing raw Bayer-pattern images coming from
-     * an image sensor.
-     *
-     * In an image buffer with this format, starting from the first pixel of each
-     * row, each 4 consecutive pixels are packed into 5 bytes (40 bits). Each one
-     * of the first 4 bytes contains the top 8 bits of each pixel, The fifth byte
-     * contains the 2 least significant bits of the 4 pixels, the exact layout data
-     * for each 4 consecutive pixels is illustrated below (Pi[j] stands for the jth
-     * bit of the ith pixel):
-     *
-     *          bit 7                                     bit 0
-     *          =====|=====|=====|=====|=====|=====|=====|=====|
-     * Byte 0: |P0[9]|P0[8]|P0[7]|P0[6]|P0[5]|P0[4]|P0[3]|P0[2]|
-     *         |-----|-----|-----|-----|-----|-----|-----|-----|
-     * Byte 1: |P1[9]|P1[8]|P1[7]|P1[6]|P1[5]|P1[4]|P1[3]|P1[2]|
-     *         |-----|-----|-----|-----|-----|-----|-----|-----|
-     * Byte 2: |P2[9]|P2[8]|P2[7]|P2[6]|P2[5]|P2[4]|P2[3]|P2[2]|
-     *         |-----|-----|-----|-----|-----|-----|-----|-----|
-     * Byte 3: |P3[9]|P3[8]|P3[7]|P3[6]|P3[5]|P3[4]|P3[3]|P3[2]|
-     *         |-----|-----|-----|-----|-----|-----|-----|-----|
-     * Byte 4: |P3[1]|P3[0]|P2[1]|P2[0]|P1[1]|P1[0]|P0[1]|P0[0]|
-     *          ===============================================
-     *
-     * This format assumes
-     * - a width multiple of 4 pixels
-     * - an even height
-     * - a vertical stride equal to the height
-     * - strides are specified in bytes, not in pixels
-     *
-     *   size = stride * height
-     *
-     * When stride is equal to width * (10 / 8), there will be no padding bytes at
-     * the end of each row, the entire image data is densely packed. When stride is
-     * larger than width * (10 / 8), padding bytes will be present at the end of each
-     * row (including the last row).
-     *
-     * This format must be accepted by the gralloc module when used with the
-     * following usage flags:
-     *    - GRALLOC_USAGE_HW_CAMERA_*
-     *    - GRALLOC_USAGE_SW_*
-     *    - GRALLOC_USAGE_RENDERSCRIPT
-     *
-     * When used with ANativeWindow, the dataSpace field should be
-     * HAL_DATASPACE_ARBITRARY, as raw image sensor buffers require substantial
-     * extra metadata to define.
-     */
-    HAL_PIXEL_FORMAT_RAW10 = 0x25,
-
-    /*
-     * Android RAW12 format:
-     *
-     * This format is exposed outside of camera HAL to applications.
-     *
-     * RAW12 is a single-channel, 12-bit per pixel, densely packed in each row,
-     * unprocessed format, usually representing raw Bayer-pattern images coming from
-     * an image sensor.
-     *
-     * In an image buffer with this format, starting from the first pixel of each
-     * row, each two consecutive pixels are packed into 3 bytes (24 bits). The first
-     * and second byte contains the top 8 bits of first and second pixel. The third
-     * byte contains the 4 least significant bits of the two pixels, the exact layout
-     * data for each two consecutive pixels is illustrated below (Pi[j] stands for
-     * the jth bit of the ith pixel):
-     *
-     *           bit 7                                            bit 0
-     *          ======|======|======|======|======|======|======|======|
-     * Byte 0: |P0[11]|P0[10]|P0[ 9]|P0[ 8]|P0[ 7]|P0[ 6]|P0[ 5]|P0[ 4]|
-     *         |------|------|------|------|------|------|------|------|
-     * Byte 1: |P1[11]|P1[10]|P1[ 9]|P1[ 8]|P1[ 7]|P1[ 6]|P1[ 5]|P1[ 4]|
-     *         |------|------|------|------|------|------|------|------|
-     * Byte 2: |P1[ 3]|P1[ 2]|P1[ 1]|P1[ 0]|P0[ 3]|P0[ 2]|P0[ 1]|P0[ 0]|
-     *          =======================================================
-     *
-     * This format assumes:
-     * - a width multiple of 4 pixels
-     * - an even height
-     * - a vertical stride equal to the height
-     * - strides are specified in bytes, not in pixels
-     *
-     *   size = stride * height
-     *
-     * When stride is equal to width * (12 / 8), there will be no padding bytes at
-     * the end of each row, the entire image data is densely packed. When stride is
-     * larger than width * (12 / 8), padding bytes will be present at the end of
-     * each row (including the last row).
-     *
-     * This format must be accepted by the gralloc module when used with the
-     * following usage flags:
-     *    - GRALLOC_USAGE_HW_CAMERA_*
-     *    - GRALLOC_USAGE_SW_*
-     *    - GRALLOC_USAGE_RENDERSCRIPT
-     *
-     * When used with ANativeWindow, the dataSpace field should be
-     * HAL_DATASPACE_ARBITRARY, as raw image sensor buffers require substantial
-     * extra metadata to define.
-     */
-    HAL_PIXEL_FORMAT_RAW12 = 0x26,
-
-    /*
-     * Android opaque RAW format:
-     *
-     * This format is exposed outside of the camera HAL to applications.
-     *
-     * RAW_OPAQUE is a format for unprocessed raw image buffers coming from an
-     * image sensor. The actual structure of buffers of this format is
-     * implementation-dependent.
-     *
-     * This format must be accepted by the gralloc module when used with the
-     * following usage flags:
-     *    - GRALLOC_USAGE_HW_CAMERA_*
-     *    - GRALLOC_USAGE_SW_*
-     *    - GRALLOC_USAGE_RENDERSCRIPT
-     *
-     * When used with ANativeWindow, the dataSpace field should be
-     * HAL_DATASPACE_ARBITRARY, as raw image sensor buffers require substantial
-     * extra metadata to define.
-     */
-    HAL_PIXEL_FORMAT_RAW_OPAQUE = 0x24,
-
-    /*
-     * Android binary blob graphics buffer format:
-     *
-     * This format is used to carry task-specific data which does not have a
-     * standard image structure. The details of the format are left to the two
-     * endpoints.
-     *
-     * A typical use case is for transporting JPEG-compressed images from the
-     * Camera HAL to the framework or to applications.
-     *
-     * Buffers of this format must have a height of 1, and width equal to their
-     * size in bytes.
-     *
-     * When used with ANativeWindow, the mapping of the dataSpace field to
-     * buffer contents for BLOB is as follows:
-     *
-     *  dataSpace value               | Buffer contents
-     * -------------------------------+-----------------------------------------
-     *  HAL_DATASPACE_JFIF            | An encoded JPEG image
-     *  HAL_DATASPACE_DEPTH           | An android_depth_points buffer
-     *  Other                         | Unsupported
-     *
-     */
-    HAL_PIXEL_FORMAT_BLOB = 0x21,
-
-    /*
-     * Android format indicating that the choice of format is entirely up to the
-     * device-specific Gralloc implementation.
-     *
-     * The Gralloc implementation should examine the usage bits passed in when
-     * allocating a buffer with this format, and it should derive the pixel
-     * format from those usage flags.  This format will never be used with any
-     * of the GRALLOC_USAGE_SW_* usage flags.
-     *
-     * If a buffer of this format is to be used as an OpenGL ES texture, the
-     * framework will assume that sampling the texture will always return an
-     * alpha value of 1.0 (i.e. the buffer contains only opaque pixel values).
-     *
-     * When used with ANativeWindow, the dataSpace field describes the color
-     * space of the buffer.
-     */
-    HAL_PIXEL_FORMAT_IMPLEMENTATION_DEFINED = 0x22,
-
-    /*
-     * Android flexible YCbCr 4:2:0 formats
-     *
-     * This format allows platforms to use an efficient YCbCr/YCrCb 4:2:0
-     * buffer layout, while still describing the general format in a
-     * layout-independent manner.  While called YCbCr, it can be
-     * used to describe formats with either chromatic ordering, as well as
-     * whole planar or semiplanar layouts.
-     *
-     * struct android_ycbcr (below) is the the struct used to describe it.
-     *
-     * This format must be accepted by the gralloc module when
-     * USAGE_SW_WRITE_* or USAGE_SW_READ_* are set.
-     *
-     * This format is locked for use by gralloc's (*lock_ycbcr) method, and
-     * locking with the (*lock) method will return an error.
-     *
-     * When used with ANativeWindow, the dataSpace field describes the color
-     * space of the buffer.
-     */
-    HAL_PIXEL_FORMAT_YCbCr_420_888 = 0x23,
-
-    /*
-     * Android flexible YCbCr 4:2:2 formats
-     *
-     * This format allows platforms to use an efficient YCbCr/YCrCb 4:2:2
-     * buffer layout, while still describing the general format in a
-     * layout-independent manner.  While called YCbCr, it can be
-     * used to describe formats with either chromatic ordering, as well as
-     * whole planar or semiplanar layouts.
-     *
-     * This format is currently only used by SW readable buffers
-     * produced by MediaCodecs, so the gralloc module can ignore this format.
-     */
-    HAL_PIXEL_FORMAT_YCbCr_422_888 = 0x27,
-
-    /*
-     * Android flexible YCbCr 4:4:4 formats
-     *
-     * This format allows platforms to use an efficient YCbCr/YCrCb 4:4:4
-     * buffer layout, while still describing the general format in a
-     * layout-independent manner.  While called YCbCr, it can be
-     * used to describe formats with either chromatic ordering, as well as
-     * whole planar or semiplanar layouts.
-     *
-     * This format is currently only used by SW readable buffers
-     * produced by MediaCodecs, so the gralloc module can ignore this format.
-     */
-    HAL_PIXEL_FORMAT_YCbCr_444_888 = 0x28,
-
-    /*
-     * Android flexible RGB 888 formats
-     *
-     * This format allows platforms to use an efficient RGB/BGR/RGBX/BGRX
-     * buffer layout, while still describing the general format in a
-     * layout-independent manner.  While called RGB, it can be
-     * used to describe formats with either color ordering and optional
-     * padding, as well as whole planar layout.
-     *
-     * This format is currently only used by SW readable buffers
-     * produced by MediaCodecs, so the gralloc module can ignore this format.
-     */
-    HAL_PIXEL_FORMAT_FLEX_RGB_888 = 0x29,
-
-    /*
-     * Android flexible RGBA 8888 formats
-     *
-     * This format allows platforms to use an efficient RGBA/BGRA/ARGB/ABGR
-     * buffer layout, while still describing the general format in a
-     * layout-independent manner.  While called RGBA, it can be
-     * used to describe formats with any of the component orderings, as
-     * well as whole planar layout.
-     *
-     * This format is currently only used by SW readable buffers
-     * produced by MediaCodecs, so the gralloc module can ignore this format.
-     */
-    HAL_PIXEL_FORMAT_FLEX_RGBA_8888 = 0x2A,
-
-    /* Legacy formats (deprecated), used by ImageFormat.java */
-    HAL_PIXEL_FORMAT_YCbCr_422_SP       = 0x10, // NV16
-    HAL_PIXEL_FORMAT_YCrCb_420_SP       = 0x11, // NV21
-    HAL_PIXEL_FORMAT_YCbCr_422_I        = 0x14, // YUY2
-} android_pixel_format_t;
-
 /*
  * Structure for describing YCbCr formats for consumption by applications.
  * This is used with HAL_PIXEL_FORMAT_YCbCr_*_888.
@@ -622,797 +237,6 @@
 #endif
 };
 
-/**
- * Transformation definitions
- *
- * IMPORTANT NOTE:
- * HAL_TRANSFORM_ROT_90 is applied CLOCKWISE and AFTER HAL_TRANSFORM_FLIP_{H|V}.
- *
- */
-
-typedef enum android_transform {
-    /* flip source image horizontally (around the vertical axis) */
-    HAL_TRANSFORM_FLIP_H    = 0x01,
-    /* flip source image vertically (around the horizontal axis)*/
-    HAL_TRANSFORM_FLIP_V    = 0x02,
-    /* rotate source image 90 degrees clockwise */
-    HAL_TRANSFORM_ROT_90    = 0x04,
-    /* rotate source image 180 degrees */
-    HAL_TRANSFORM_ROT_180   = 0x03,
-    /* rotate source image 270 degrees clockwise */
-    HAL_TRANSFORM_ROT_270   = 0x07,
-    /* don't use. see system/window.h */
-    HAL_TRANSFORM_RESERVED  = 0x08,
-} android_transform_t;
-
-/**
- * Dataspace Definitions
- * ======================
- *
- * Dataspace is the definition of how pixel values should be interpreted.
- *
- * For many formats, this is the colorspace of the image data, which includes
- * primaries (including white point) and the transfer characteristic function,
- * which describes both gamma curve and numeric range (within the bit depth).
- *
- * Other dataspaces include depth measurement data from a depth camera.
- *
- * A dataspace is comprised of a number of fields.
- *
- * Version
- * --------
- * The top 2 bits represent the revision of the field specification. This is
- * currently always 0.
- *
- *
- * bits    31-30 29                      -                          0
- *        +-----+----------------------------------------------------+
- * fields | Rev |            Revision specific fields                |
- *        +-----+----------------------------------------------------+
- *
- * Field layout for version = 0:
- * ----------------------------
- *
- * A dataspace is comprised of the following fields:
- *      Standard
- *      Transfer function
- *      Range
- *
- * bits    31-30 29-27 26 -  22 21 -  16 15             -           0
- *        +-----+-----+--------+--------+----------------------------+
- * fields |  0  |Range|Transfer|Standard|    Legacy and custom       |
- *        +-----+-----+--------+--------+----------------------------+
- *          VV    RRR   TTTTT    SSSSSS    LLLLLLLL       LLLLLLLL
- *
- * If range, transfer and standard fields are all 0 (e.g. top 16 bits are
- * all zeroes), the bottom 16 bits contain either a legacy dataspace value,
- * or a custom value.
- */
-
-typedef enum android_dataspace {
-    /*
-     * Default-assumption data space, when not explicitly specified.
-     *
-     * It is safest to assume the buffer is an image with sRGB primaries and
-     * encoding ranges, but the consumer and/or the producer of the data may
-     * simply be using defaults. No automatic gamma transform should be
-     * expected, except for a possible display gamma transform when drawn to a
-     * screen.
-     */
-    HAL_DATASPACE_UNKNOWN = 0x0,
-
-    /*
-     * Arbitrary dataspace with manually defined characteristics.  Definition
-     * for colorspaces or other meaning must be communicated separately.
-     *
-     * This is used when specifying primaries, transfer characteristics,
-     * etc. separately.
-     *
-     * A typical use case is in video encoding parameters (e.g. for H.264),
-     * where a colorspace can have separately defined primaries, transfer
-     * characteristics, etc.
-     */
-    HAL_DATASPACE_ARBITRARY = 0x1,
-
-    /*
-     * Color-description aspects
-     *
-     * The following aspects define various characteristics of the color
-     * specification. These represent bitfields, so that a data space value
-     * can specify each of them independently.
-     */
-
-    HAL_DATASPACE_STANDARD_SHIFT = 16,
-
-    /*
-     * Standard aspect
-     *
-     * Defines the chromaticity coordinates of the source primaries in terms of
-     * the CIE 1931 definition of x and y specified in ISO 11664-1.
-     */
-    HAL_DATASPACE_STANDARD_MASK = 63 << HAL_DATASPACE_STANDARD_SHIFT,  // 0x3F
-
-    /*
-     * Chromacity coordinates are unknown or are determined by the application.
-     * Implementations shall use the following suggested standards:
-     *
-     * All YCbCr formats: BT709 if size is 720p or larger (since most video
-     *                    content is letterboxed this corresponds to width is
-     *                    1280 or greater, or height is 720 or greater).
-     *                    BT601_625 if size is smaller than 720p or is JPEG.
-     * All RGB formats:   BT709.
-     *
-     * For all other formats standard is undefined, and implementations should use
-     * an appropriate standard for the data represented.
-     */
-    HAL_DATASPACE_STANDARD_UNSPECIFIED = 0 << HAL_DATASPACE_STANDARD_SHIFT,
-
-    /*
-     * Primaries:       x       y
-     *  green           0.300   0.600
-     *  blue            0.150   0.060
-     *  red             0.640   0.330
-     *  white (D65)     0.3127  0.3290
-     *
-     * Use the unadjusted KR = 0.2126, KB = 0.0722 luminance interpretation
-     * for RGB conversion.
-     */
-    HAL_DATASPACE_STANDARD_BT709 = 1 << HAL_DATASPACE_STANDARD_SHIFT,
-
-    /*
-     * Primaries:       x       y
-     *  green           0.290   0.600
-     *  blue            0.150   0.060
-     *  red             0.640   0.330
-     *  white (D65)     0.3127  0.3290
-     *
-     *  KR = 0.299, KB = 0.114. This adjusts the luminance interpretation
-     *  for RGB conversion from the one purely determined by the primaries
-     *  to minimize the color shift into RGB space that uses BT.709
-     *  primaries.
-     */
-    HAL_DATASPACE_STANDARD_BT601_625 = 2 << HAL_DATASPACE_STANDARD_SHIFT,
-
-    /*
-     * Primaries:       x       y
-     *  green           0.290   0.600
-     *  blue            0.150   0.060
-     *  red             0.640   0.330
-     *  white (D65)     0.3127  0.3290
-     *
-     * Use the unadjusted KR = 0.222, KB = 0.071 luminance interpretation
-     * for RGB conversion.
-     */
-    HAL_DATASPACE_STANDARD_BT601_625_UNADJUSTED = 3 << HAL_DATASPACE_STANDARD_SHIFT,
-
-    /*
-     * Primaries:       x       y
-     *  green           0.310   0.595
-     *  blue            0.155   0.070
-     *  red             0.630   0.340
-     *  white (D65)     0.3127  0.3290
-     *
-     *  KR = 0.299, KB = 0.114. This adjusts the luminance interpretation
-     *  for RGB conversion from the one purely determined by the primaries
-     *  to minimize the color shift into RGB space that uses BT.709
-     *  primaries.
-     */
-    HAL_DATASPACE_STANDARD_BT601_525 = 4 << HAL_DATASPACE_STANDARD_SHIFT,
-
-    /*
-     * Primaries:       x       y
-     *  green           0.310   0.595
-     *  blue            0.155   0.070
-     *  red             0.630   0.340
-     *  white (D65)     0.3127  0.3290
-     *
-     * Use the unadjusted KR = 0.212, KB = 0.087 luminance interpretation
-     * for RGB conversion (as in SMPTE 240M).
-     */
-    HAL_DATASPACE_STANDARD_BT601_525_UNADJUSTED = 5 << HAL_DATASPACE_STANDARD_SHIFT,
-
-    /*
-     * Primaries:       x       y
-     *  green           0.170   0.797
-     *  blue            0.131   0.046
-     *  red             0.708   0.292
-     *  white (D65)     0.3127  0.3290
-     *
-     * Use the unadjusted KR = 0.2627, KB = 0.0593 luminance interpretation
-     * for RGB conversion.
-     */
-    HAL_DATASPACE_STANDARD_BT2020 = 6 << HAL_DATASPACE_STANDARD_SHIFT,
-
-    /*
-     * Primaries:       x       y
-     *  green           0.170   0.797
-     *  blue            0.131   0.046
-     *  red             0.708   0.292
-     *  white (D65)     0.3127  0.3290
-     *
-     * Use the unadjusted KR = 0.2627, KB = 0.0593 luminance interpretation
-     * for RGB conversion using the linear domain.
-     */
-    HAL_DATASPACE_STANDARD_BT2020_CONSTANT_LUMINANCE = 7 << HAL_DATASPACE_STANDARD_SHIFT,
-
-    /*
-     * Primaries:       x      y
-     *  green           0.21   0.71
-     *  blue            0.14   0.08
-     *  red             0.67   0.33
-     *  white (C)       0.310  0.316
-     *
-     * Use the unadjusted KR = 0.30, KB = 0.11 luminance interpretation
-     * for RGB conversion.
-     */
-    HAL_DATASPACE_STANDARD_BT470M = 8 << HAL_DATASPACE_STANDARD_SHIFT,
-
-    /*
-     * Primaries:       x       y
-     *  green           0.243   0.692
-     *  blue            0.145   0.049
-     *  red             0.681   0.319
-     *  white (C)       0.310   0.316
-     *
-     * Use the unadjusted KR = 0.254, KB = 0.068 luminance interpretation
-     * for RGB conversion.
-     */
-    HAL_DATASPACE_STANDARD_FILM = 9 << HAL_DATASPACE_STANDARD_SHIFT,
-
-    HAL_DATASPACE_TRANSFER_SHIFT = 22,
-
-    /*
-     * Transfer aspect
-     *
-     * Transfer characteristics are the opto-electronic transfer characteristic
-     * at the source as a function of linear optical intensity (luminance).
-     *
-     * For digital signals, E corresponds to the recorded value. Normally, the
-     * transfer function is applied in RGB space to each of the R, G and B
-     * components independently. This may result in color shift that can be
-     * minized by applying the transfer function in Lab space only for the L
-     * component. Implementation may apply the transfer function in RGB space
-     * for all pixel formats if desired.
-     */
-
-    HAL_DATASPACE_TRANSFER_MASK = 31 << HAL_DATASPACE_TRANSFER_SHIFT,  // 0x1F
-
-    /*
-     * Transfer characteristics are unknown or are determined by the
-     * application.
-     *
-     * Implementations should use the following transfer functions:
-     *
-     * For YCbCr formats: use HAL_DATASPACE_TRANSFER_SMPTE_170M
-     * For RGB formats: use HAL_DATASPACE_TRANSFER_SRGB
-     *
-     * For all other formats transfer function is undefined, and implementations
-     * should use an appropriate standard for the data represented.
-     */
-    HAL_DATASPACE_TRANSFER_UNSPECIFIED = 0 << HAL_DATASPACE_TRANSFER_SHIFT,
-
-    /*
-     * Transfer characteristic curve:
-     *  E = L
-     *      L - luminance of image 0 <= L <= 1 for conventional colorimetry
-     *      E - corresponding electrical signal
-     */
-    HAL_DATASPACE_TRANSFER_LINEAR = 1 << HAL_DATASPACE_TRANSFER_SHIFT,
-
-    /*
-     * Transfer characteristic curve:
-     *
-     * E = 1.055 * L^(1/2.4) - 0.055  for 0.0031308 <= L <= 1
-     *   = 12.92 * L                  for 0 <= L < 0.0031308
-     *     L - luminance of image 0 <= L <= 1 for conventional colorimetry
-     *     E - corresponding electrical signal
-     */
-    HAL_DATASPACE_TRANSFER_SRGB = 2 << HAL_DATASPACE_TRANSFER_SHIFT,
-
-    /*
-     * BT.601 525, BT.601 625, BT.709, BT.2020
-     *
-     * Transfer characteristic curve:
-     *  E = 1.099 * L ^ 0.45 - 0.099  for 0.018 <= L <= 1
-     *    = 4.500 * L                 for 0 <= L < 0.018
-     *      L - luminance of image 0 <= L <= 1 for conventional colorimetry
-     *      E - corresponding electrical signal
-     */
-    HAL_DATASPACE_TRANSFER_SMPTE_170M = 3 << HAL_DATASPACE_TRANSFER_SHIFT,
-
-    /*
-     * Assumed display gamma 2.2.
-     *
-     * Transfer characteristic curve:
-     *  E = L ^ (1/2.2)
-     *      L - luminance of image 0 <= L <= 1 for conventional colorimetry
-     *      E - corresponding electrical signal
-     */
-    HAL_DATASPACE_TRANSFER_GAMMA2_2 = 4 << HAL_DATASPACE_TRANSFER_SHIFT,
-
-    /*
-     *  display gamma 2.8.
-     *
-     * Transfer characteristic curve:
-     *  E = L ^ (1/2.8)
-     *      L - luminance of image 0 <= L <= 1 for conventional colorimetry
-     *      E - corresponding electrical signal
-     */
-    HAL_DATASPACE_TRANSFER_GAMMA2_8 = 5 << HAL_DATASPACE_TRANSFER_SHIFT,
-
-    /*
-     * SMPTE ST 2084
-     *
-     * Transfer characteristic curve:
-     *  E = ((c1 + c2 * L^n) / (1 + c3 * L^n)) ^ m
-     *  c1 = c3 - c2 + 1 = 3424 / 4096 = 0.8359375
-     *  c2 = 32 * 2413 / 4096 = 18.8515625
-     *  c3 = 32 * 2392 / 4096 = 18.6875
-     *  m = 128 * 2523 / 4096 = 78.84375
-     *  n = 0.25 * 2610 / 4096 = 0.1593017578125
-     *      L - luminance of image 0 <= L <= 1 for HDR colorimetry.
-     *          L = 1 corresponds to 10000 cd/m2
-     *      E - corresponding electrical signal
-     */
-    HAL_DATASPACE_TRANSFER_ST2084 = 6 << HAL_DATASPACE_TRANSFER_SHIFT,
-
-    /*
-     * ARIB STD-B67 Hybrid Log Gamma
-     *
-     * Transfer characteristic curve:
-     *  E = r * L^0.5                 for 0 <= L <= 1
-     *    = a * ln(L - b) + c         for 1 < L
-     *  a = 0.17883277
-     *  b = 0.28466892
-     *  c = 0.55991073
-     *  r = 0.5
-     *      L - luminance of image 0 <= L for HDR colorimetry. L = 1 corresponds
-     *          to reference white level of 100 cd/m2
-     *      E - corresponding electrical signal
-     */
-    HAL_DATASPACE_TRANSFER_HLG = 7 << HAL_DATASPACE_TRANSFER_SHIFT,
-
-    HAL_DATASPACE_RANGE_SHIFT = 27,
-
-    /*
-     * Range aspect
-     *
-     * Defines the range of values corresponding to the unit range of 0-1.
-     * This is defined for YCbCr only, but can be expanded to RGB space.
-     */
-    HAL_DATASPACE_RANGE_MASK = 7 << HAL_DATASPACE_RANGE_SHIFT,  // 0x7
-
-    /*
-     * Range is unknown or are determined by the application.  Implementations
-     * shall use the following suggested ranges:
-     *
-     * All YCbCr formats: limited range.
-     * All RGB or RGBA formats (including RAW and Bayer): full range.
-     * All Y formats: full range
-     *
-     * For all other formats range is undefined, and implementations should use
-     * an appropriate range for the data represented.
-     */
-    HAL_DATASPACE_RANGE_UNSPECIFIED = 0 << HAL_DATASPACE_RANGE_SHIFT,
-
-    /*
-     * Full range uses all values for Y, Cb and Cr from
-     * 0 to 2^b-1, where b is the bit depth of the color format.
-     */
-    HAL_DATASPACE_RANGE_FULL = 1 << HAL_DATASPACE_RANGE_SHIFT,
-
-    /*
-     * Limited range uses values 16/256*2^b to 235/256*2^b for Y, and
-     * 1/16*2^b to 15/16*2^b for Cb, Cr, R, G and B, where b is the bit depth of
-     * the color format.
-     *
-     * E.g. For 8-bit-depth formats:
-     * Luma (Y) samples should range from 16 to 235, inclusive
-     * Chroma (Cb, Cr) samples should range from 16 to 240, inclusive
-     *
-     * For 10-bit-depth formats:
-     * Luma (Y) samples should range from 64 to 940, inclusive
-     * Chroma (Cb, Cr) samples should range from 64 to 960, inclusive
-     */
-    HAL_DATASPACE_RANGE_LIMITED = 2 << HAL_DATASPACE_RANGE_SHIFT,
-
-    /*
-     * Legacy dataspaces
-     */
-
-    /*
-     * sRGB linear encoding:
-     *
-     * The red, green, and blue components are stored in sRGB space, but
-     * are linear, not gamma-encoded.
-     * The RGB primaries and the white point are the same as BT.709.
-     *
-     * The values are encoded using the full range ([0,255] for 8-bit) for all
-     * components.
-     */
-    HAL_DATASPACE_SRGB_LINEAR = 0x200, // deprecated, use HAL_DATASPACE_V0_SRGB_LINEAR
-
-    HAL_DATASPACE_V0_SRGB_LINEAR = HAL_DATASPACE_STANDARD_BT709 |
-            HAL_DATASPACE_TRANSFER_LINEAR | HAL_DATASPACE_RANGE_FULL,
-
-
-    /*
-     * sRGB gamma encoding:
-     *
-     * The red, green and blue components are stored in sRGB space, and
-     * converted to linear space when read, using the SRGB transfer function
-     * for each of the R, G and B components. When written, the inverse
-     * transformation is performed.
-     *
-     * The alpha component, if present, is always stored in linear space and
-     * is left unmodified when read or written.
-     *
-     * Use full range and BT.709 standard.
-     */
-    HAL_DATASPACE_SRGB = 0x201, // deprecated, use HAL_DATASPACE_V0_SRGB
-
-    HAL_DATASPACE_V0_SRGB = HAL_DATASPACE_STANDARD_BT709 |
-            HAL_DATASPACE_TRANSFER_SRGB | HAL_DATASPACE_RANGE_FULL,
-
-
-    /*
-     * YCbCr Colorspaces
-     * -----------------
-     *
-     * Primaries are given using (x,y) coordinates in the CIE 1931 definition
-     * of x and y specified by ISO 11664-1.
-     *
-     * Transfer characteristics are the opto-electronic transfer characteristic
-     * at the source as a function of linear optical intensity (luminance).
-     */
-
-    /*
-     * JPEG File Interchange Format (JFIF)
-     *
-     * Same model as BT.601-625, but all values (Y, Cb, Cr) range from 0 to 255
-     *
-     * Use full range, BT.601 transfer and BT.601_625 standard.
-     */
-    HAL_DATASPACE_JFIF = 0x101, // deprecated, use HAL_DATASPACE_V0_JFIF
-
-    HAL_DATASPACE_V0_JFIF = HAL_DATASPACE_STANDARD_BT601_625 |
-            HAL_DATASPACE_TRANSFER_SMPTE_170M | HAL_DATASPACE_RANGE_FULL,
-
-    /*
-     * ITU-R Recommendation 601 (BT.601) - 625-line
-     *
-     * Standard-definition television, 625 Lines (PAL)
-     *
-     * Use limited range, BT.601 transfer and BT.601_625 standard.
-     */
-    HAL_DATASPACE_BT601_625 = 0x102, // deprecated, use HAL_DATASPACE_V0_BT601_625
-
-    HAL_DATASPACE_V0_BT601_625 = HAL_DATASPACE_STANDARD_BT601_625 |
-            HAL_DATASPACE_TRANSFER_SMPTE_170M | HAL_DATASPACE_RANGE_LIMITED,
-
-
-    /*
-     * ITU-R Recommendation 601 (BT.601) - 525-line
-     *
-     * Standard-definition television, 525 Lines (NTSC)
-     *
-     * Use limited range, BT.601 transfer and BT.601_525 standard.
-     */
-    HAL_DATASPACE_BT601_525 = 0x103, // deprecated, use HAL_DATASPACE_V0_BT601_525
-
-    HAL_DATASPACE_V0_BT601_525 = HAL_DATASPACE_STANDARD_BT601_525 |
-            HAL_DATASPACE_TRANSFER_SMPTE_170M | HAL_DATASPACE_RANGE_LIMITED,
-
-    /*
-     * ITU-R Recommendation 709 (BT.709)
-     *
-     * High-definition television
-     *
-     * Use limited range, BT.709 transfer and BT.709 standard.
-     */
-    HAL_DATASPACE_BT709 = 0x104, // deprecated, use HAL_DATASPACE_V0_BT709
-
-    HAL_DATASPACE_V0_BT709 = HAL_DATASPACE_STANDARD_BT709 |
-            HAL_DATASPACE_TRANSFER_SMPTE_170M | HAL_DATASPACE_RANGE_LIMITED,
-
-    /*
-     * Data spaces for non-color formats
-     */
-
-    /*
-     * The buffer contains depth ranging measurements from a depth camera.
-     * This value is valid with formats:
-     *    HAL_PIXEL_FORMAT_Y16: 16-bit samples, consisting of a depth measurement
-     *       and an associated confidence value. The 3 MSBs of the sample make
-     *       up the confidence value, and the low 13 LSBs of the sample make up
-     *       the depth measurement.
-     *       For the confidence section, 0 means 100% confidence, 1 means 0%
-     *       confidence. The mapping to a linear float confidence value between
-     *       0.f and 1.f can be obtained with
-     *         float confidence = (((depthSample >> 13) - 1) & 0x7) / 7.0f;
-     *       The depth measurement can be extracted simply with
-     *         uint16_t range = (depthSample & 0x1FFF);
-     *    HAL_PIXEL_FORMAT_BLOB: A depth point cloud, as
-     *       a variable-length float (x,y,z, confidence) coordinate point list.
-     *       The point cloud will be represented with the android_depth_points
-     *       structure.
-     */
-    HAL_DATASPACE_DEPTH = 0x1000
-
-} android_dataspace_t;
-
-/*
- * Color modes that may be supported by a display.
- *
- * Definitions:
- * Rendering intent generally defines the goal in mapping a source (input)
- * color to a destination device color for a given color mode.
- *
- *  It is important to keep in mind three cases where mapping may be applied:
- *  1. The source gamut is much smaller than the destination (display) gamut
- *  2. The source gamut is much larger than the destination gamut (this will
- *  ordinarily be handled using colorimetric rendering, below)
- *  3. The source and destination gamuts are roughly equal, although not
- *  completely overlapping
- *  Also, a common requirement for mappings is that skin tones should be
- *  preserved, or at least remain natural in appearance.
- *
- *  Colorimetric Rendering Intent (All cases):
- *  Colorimetric indicates that colors should be preserved. In the case
- *  that the source gamut lies wholly within the destination gamut or is
- *  about the same (#1, #3), this will simply mean that no manipulations
- *  (no saturation boost, for example) are applied. In the case where some
- *  source colors lie outside the destination gamut (#2, #3), those will
- *  need to be mapped to colors that are within the destination gamut,
- *  while the already in-gamut colors remain unchanged.
- *
- *  Non-colorimetric transforms can take many forms. There are no hard
- *  rules and it's left to the implementation to define.
- *  Two common intents are described below.
- *
- *  Stretched-Gamut Enhancement Intent (Source < Destination):
- *  When the destination gamut is much larger than the source gamut (#1), the
- *  source primaries may be redefined to reflect the full extent of the
- *  destination space, or to reflect an intermediate gamut.
- *  Skin-tone preservation would likely be applied. An example might be sRGB
- *  input displayed on a DCI-P3 capable device, with skin-tone preservation.
- *
- *  Within-Gamut Enhancement Intent (Source >= Destination):
- *  When the device (destination) gamut is not larger than the source gamut
- *  (#2 or #3), but the appearance of a larger gamut is desired, techniques
- *  such as saturation boost may be applied to the source colors. Skin-tone
- *  preservation may be applied. There is no unique method for within-gamut
- *  enhancement; it would be defined within a flexible color mode.
- *
- */
-typedef enum android_color_mode {
-
-  /*
-   * HAL_COLOR_MODE_DEFAULT is the "native" gamut of the display.
-   * White Point: Vendor/OEM defined
-   * Panel Gamma: Vendor/OEM defined (typically 2.2)
-   * Rendering Intent: Vendor/OEM defined (typically 'enhanced')
-   */
-  HAL_COLOR_MODE_NATIVE = 0,
-
-  /*
-   * HAL_COLOR_MODE_STANDARD_BT601_625 corresponds with display
-   * settings that implement the ITU-R Recommendation BT.601
-   * or Rec 601. Using 625 line version
-   * Rendering Intent: Colorimetric
-   * Primaries:
-   *                  x       y
-   *  green           0.290   0.600
-   *  blue            0.150   0.060
-   *  red             0.640   0.330
-   *  white (D65)     0.3127  0.3290
-   *
-   *  KR = 0.299, KB = 0.114. This adjusts the luminance interpretation
-   *  for RGB conversion from the one purely determined by the primaries
-   *  to minimize the color shift into RGB space that uses BT.709
-   *  primaries.
-   *
-   * Gamma Correction (GC):
-   *
-   *  if Vlinear < 0.018
-   *    Vnonlinear = 4.500 * Vlinear
-   *  else
-   *    Vnonlinear = 1.099 * (Vlinear)^(0.45) – 0.099
-   */
-  HAL_COLOR_MODE_STANDARD_BT601_625 = 1,
-
-  /*
-   * Primaries:
-   *                  x       y
-   *  green           0.290   0.600
-   *  blue            0.150   0.060
-   *  red             0.640   0.330
-   *  white (D65)     0.3127  0.3290
-   *
-   *  Use the unadjusted KR = 0.222, KB = 0.071 luminance interpretation
-   *  for RGB conversion.
-   *
-   * Gamma Correction (GC):
-   *
-   *  if Vlinear < 0.018
-   *    Vnonlinear = 4.500 * Vlinear
-   *  else
-   *    Vnonlinear = 1.099 * (Vlinear)^(0.45) – 0.099
-   */
-  HAL_COLOR_MODE_STANDARD_BT601_625_UNADJUSTED = 2,
-
-  /*
-   * Primaries:
-   *                  x       y
-   *  green           0.310   0.595
-   *  blue            0.155   0.070
-   *  red             0.630   0.340
-   *  white (D65)     0.3127  0.3290
-   *
-   *  KR = 0.299, KB = 0.114. This adjusts the luminance interpretation
-   *  for RGB conversion from the one purely determined by the primaries
-   *  to minimize the color shift into RGB space that uses BT.709
-   *  primaries.
-   *
-   * Gamma Correction (GC):
-   *
-   *  if Vlinear < 0.018
-   *    Vnonlinear = 4.500 * Vlinear
-   *  else
-   *    Vnonlinear = 1.099 * (Vlinear)^(0.45) – 0.099
-   */
-  HAL_COLOR_MODE_STANDARD_BT601_525 = 3,
-
-  /*
-   * Primaries:
-   *                  x       y
-   *  green           0.310   0.595
-   *  blue            0.155   0.070
-   *  red             0.630   0.340
-   *  white (D65)     0.3127  0.3290
-   *
-   *  Use the unadjusted KR = 0.212, KB = 0.087 luminance interpretation
-   *  for RGB conversion (as in SMPTE 240M).
-   *
-   * Gamma Correction (GC):
-   *
-   *  if Vlinear < 0.018
-   *    Vnonlinear = 4.500 * Vlinear
-   *  else
-   *    Vnonlinear = 1.099 * (Vlinear)^(0.45) – 0.099
-   */
-  HAL_COLOR_MODE_STANDARD_BT601_525_UNADJUSTED = 4,
-
-  /*
-   * HAL_COLOR_MODE_REC709 corresponds with display settings that implement
-   * the ITU-R Recommendation BT.709 / Rec. 709 for high-definition television.
-   * Rendering Intent: Colorimetric
-   * Primaries:
-   *                  x       y
-   *  green           0.300   0.600
-   *  blue            0.150   0.060
-   *  red             0.640   0.330
-   *  white (D65)     0.3127  0.3290
-   *
-   * HDTV REC709 Inverse Gamma Correction (IGC): V represents normalized
-   * (with [0 to 1] range) value of R, G, or B.
-   *
-   *  if Vnonlinear < 0.081
-   *    Vlinear = Vnonlinear / 4.5
-   *  else
-   *    Vlinear = ((Vnonlinear + 0.099) / 1.099) ^ (1/0.45)
-   *
-   * HDTV REC709 Gamma Correction (GC):
-   *
-   *  if Vlinear < 0.018
-   *    Vnonlinear = 4.5 * Vlinear
-   *  else
-   *    Vnonlinear = 1.099 * (Vlinear) ^ 0.45 – 0.099
-   */
-  HAL_COLOR_MODE_STANDARD_BT709 = 5,
-
-  /*
-   * HAL_COLOR_MODE_DCI_P3 corresponds with display settings that implement
-   * SMPTE EG 432-1 and SMPTE RP 431-2
-   * Rendering Intent: Colorimetric
-   * Primaries:
-   *                  x       y
-   *  green           0.265   0.690
-   *  blue            0.150   0.060
-   *  red             0.680   0.320
-   *  white (D65)     0.3127  0.3290
-   *
-   * Gamma: 2.2
-   */
-  HAL_COLOR_MODE_DCI_P3 = 6,
-
-  /*
-   * HAL_COLOR_MODE_SRGB corresponds with display settings that implement
-   * the sRGB color space. Uses the same primaries as ITU-R Recommendation
-   * BT.709
-   * Rendering Intent: Colorimetric
-   * Primaries:
-   *                  x       y
-   *  green           0.300   0.600
-   *  blue            0.150   0.060
-   *  red             0.640   0.330
-   *  white (D65)     0.3127  0.3290
-   *
-   * PC/Internet (sRGB) Inverse Gamma Correction (IGC):
-   *
-   *  if Vnonlinear ≤ 0.03928
-   *    Vlinear = Vnonlinear / 12.92
-   *  else
-   *    Vlinear = ((Vnonlinear + 0.055)/1.055) ^ 2.4
-   *
-   * PC/Internet (sRGB) Gamma Correction (GC):
-   *
-   *  if Vlinear ≤ 0.0031308
-   *    Vnonlinear = 12.92 * Vlinear
-   *  else
-   *    Vnonlinear = 1.055 * (Vlinear)^(1/2.4) – 0.055
-   */
-  HAL_COLOR_MODE_SRGB = 7,
-
-  /*
-   * HAL_COLOR_MODE_ADOBE_RGB corresponds with the RGB color space developed
-   * by Adobe Systems, Inc. in 1998.
-   * Rendering Intent: Colorimetric
-   * Primaries:
-   *                  x       y
-   *  green           0.210   0.710
-   *  blue            0.150   0.060
-   *  red             0.640   0.330
-   *  white (D65)     0.3127  0.3290
-   *
-   * Gamma: 2.2
-   */
-  HAL_COLOR_MODE_ADOBE_RGB = 8
-
-} android_color_mode_t;
-
-/*
- * Color transforms that may be applied by hardware composer to the whole
- * display.
- */
-typedef enum android_color_transform {
-    /* Applies no transform to the output color */
-    HAL_COLOR_TRANSFORM_IDENTITY = 0,
-
-    /* Applies an arbitrary transform defined by a 4x4 affine matrix */
-    HAL_COLOR_TRANSFORM_ARBITRARY_MATRIX = 1,
-
-    /* Applies a transform that inverts the value or luminance of the color, but
-     * does not modify hue or saturation */
-    HAL_COLOR_TRANSFORM_VALUE_INVERSE = 2,
-
-    /* Applies a transform that maps all colors to shades of gray */
-    HAL_COLOR_TRANSFORM_GRAYSCALE = 3,
-
-    /* Applies a transform which corrects for protanopic color blindness */
-    HAL_COLOR_TRANSFORM_CORRECT_PROTANOPIA = 4,
-
-    /* Applies a transform which corrects for deuteranopic color blindness */
-    HAL_COLOR_TRANSFORM_CORRECT_DEUTERANOPIA = 5,
-
-    /* Applies a transform which corrects for tritanopic color blindness */
-    HAL_COLOR_TRANSFORM_CORRECT_TRITANOPIA = 6
-} android_color_transform_t;
-
-/*
- * Supported HDR formats. Must be kept in sync with equivalents in Display.java.
- */
-typedef enum android_hdr {
-    /* Device supports Dolby Vision HDR */
-    HAL_HDR_DOLBY_VISION = 1,
-
-    /* Device supports HDR10 */
-    HAL_HDR_HDR10 = 2,
-
-    /* Device supports hybrid log-gamma HDR */
-    HAL_HDR_HLG = 3
-} android_hdr_t;
-
 #ifdef __cplusplus
 }
 #endif
diff --git a/include/system/radio.h b/include/system/radio.h
index d73d3ae..b164fc8 100644
--- a/include/system/radio.h
+++ b/include/system/radio.h
@@ -81,7 +81,7 @@
 } radio_direction_t;
 
 /* unique handle allocated to a radio module */
-typedef unsigned int radio_handle_t;
+typedef uint32_t radio_handle_t;
 
 /* Opaque meta data structure used by radio meta data API (see system/radio_metadata.h) */
 typedef struct radio_medtadata radio_metadata_t;
@@ -109,10 +109,10 @@
 typedef struct radio_hal_band_config {
     radio_band_t type;
     bool         antenna_connected;
-    unsigned int lower_limit;
-    unsigned int upper_limit;
-    unsigned int num_spacings;
-    unsigned int spacings[RADIO_NUM_SPACINGS_MAX];
+    uint32_t     lower_limit;
+    uint32_t     upper_limit;
+    uint32_t     num_spacings;
+    uint32_t     spacings[RADIO_NUM_SPACINGS_MAX];
     union {
         radio_hal_fm_band_config_t fm;
         radio_hal_am_band_config_t am;
@@ -137,10 +137,10 @@
     char            product[RADIO_STRING_LEN_MAX];  /* product name */
     char            version[RADIO_STRING_LEN_MAX];  /* product version */
     char            serial[RADIO_STRING_LEN_MAX];  /* serial number (for subscription services) */
-    unsigned int    num_tuners;     /* number of tuners controllable independently */
-    unsigned int    num_audio_sources; /* number of audio sources driven simultaneously */
+    uint32_t        num_tuners;     /* number of tuners controllable independently */
+    uint32_t        num_audio_sources; /* number of audio sources driven simultaneously */
     bool            supports_capture; /* the hardware supports capture of audio source audio HAL */
-    unsigned int    num_bands;      /* number of band descriptors */
+    uint32_t        num_bands;      /* number of band descriptors */
     radio_hal_band_config_t bands[RADIO_NUM_BANDS_MAX]; /* band descriptors */
 } radio_hal_properties_t;
 
@@ -153,10 +153,10 @@
     char                product[RADIO_STRING_LEN_MAX];
     char                version[RADIO_STRING_LEN_MAX];
     char                serial[RADIO_STRING_LEN_MAX];
-    unsigned int        num_tuners;
-    unsigned int        num_audio_sources;
+    uint32_t            num_tuners;
+    uint32_t            num_audio_sources;
     bool                supports_capture;
-    unsigned int        num_bands;
+    uint32_t            num_bands;
     radio_band_config_t bands[RADIO_NUM_BANDS_MAX];
 } radio_properties_t;
 
@@ -164,13 +164,14 @@
  * Contains information on currently tuned channel.
  */
 typedef struct radio_program_info {
-    unsigned int     channel;   /* current channel. (e.g kHz for band type RADIO_BAND_FM) */
-    unsigned int     sub_channel; /* current sub channel. (used for RADIO_BAND_FM_HD) */
+    uint32_t         channel;   /* current channel. (e.g kHz for band type RADIO_BAND_FM) */
+    uint32_t         sub_channel; /* current sub channel. (used for RADIO_BAND_FM_HD) */
     bool             tuned;     /* tuned to a program or not */
     bool             stereo;    /* program is stereo or not */
     bool             digital;   /* digital program or not (e.g HD Radio program) */
-    unsigned int     signal_strength; /* signal strength from 0 to 100 */
-    radio_metadata_t *metadata; /* non null if meta data are present (e.g PTY, song title ...) */
+    uint32_t         signal_strength; /* signal strength from 0 to 100 */
+                                /* non null if meta data are present (e.g PTY, song title ...) */
+    __attribute__((aligned(8))) radio_metadata_t *metadata;
 } radio_program_info_t;
 
 
@@ -195,7 +196,7 @@
 /* Event passed to the framework by the HAL callback */
 typedef struct radio_hal_event {
     radio_event_type_t  type;       /* event type */
-    int                 status;     /* used by RADIO_EVENT_CONFIG, RADIO_EVENT_TUNED */
+    int32_t             status;     /* used by RADIO_EVENT_CONFIG, RADIO_EVENT_TUNED */
     union {
         /* RADIO_EVENT_ANTENNA, RADIO_EVENT_TA, RADIO_EVENT_EA */
         bool                    on;
@@ -208,12 +209,13 @@
 /* Used internally by the framework. Same information as in struct radio_hal_event */
 typedef struct radio_event {
     radio_event_type_t  type;
-    int                 status;
+    int32_t             status;
     union {
         bool                    on;
         radio_band_config_t     config;
         radio_program_info_t    info;
-        radio_metadata_t        *metadata; /* offset from start of struct when in shared memory */
+                                /* non null if meta data are present (e.g PTY, song title ...) */
+        __attribute__((aligned(8))) radio_metadata_t *metadata;
     };
 } radio_event_t;
 
diff --git a/include/utils/SortedVector.h b/include/utils/SortedVector.h
index 86f3496..d57465d 100644
--- a/include/utils/SortedVector.h
+++ b/include/utils/SortedVector.h
@@ -37,18 +37,18 @@
 
 public:
             typedef TYPE    value_type;
-    
-    /*! 
+
+    /*!
      * Constructors and destructors
      */
-    
+
                             SortedVector();
                             SortedVector(const SortedVector<TYPE>& rhs);
     virtual                 ~SortedVector();
 
     /*! copy operator */
-    const SortedVector<TYPE>&   operator = (const SortedVector<TYPE>& rhs) const;    
-    SortedVector<TYPE>&         operator = (const SortedVector<TYPE>& rhs);    
+    const SortedVector<TYPE>&   operator = (const SortedVector<TYPE>& rhs) const;
+    SortedVector<TYPE>&         operator = (const SortedVector<TYPE>& rhs);
 
     /*
      * empty the vector
@@ -56,7 +56,7 @@
 
     inline  void            clear()             { VectorImpl::clear(); }
 
-    /*! 
+    /*!
      * vector stats
      */
 
@@ -69,11 +69,11 @@
     //! sets the capacity. capacity can never be reduced less than size()
     inline  ssize_t         setCapacity(size_t size)    { return VectorImpl::setCapacity(size); }
 
-    /*! 
+    /*!
      * C-style array access
      */
-     
-    //! read-only C-style access 
+
+    //! read-only C-style access
     inline  const TYPE*     array() const;
 
     //! read-write C-style access. BE VERY CAREFUL when modifying the array
@@ -82,12 +82,12 @@
 
             //! finds the index of an item
             ssize_t         indexOf(const TYPE& item) const;
-            
+
             //! finds where this item should be inserted
             size_t          orderOf(const TYPE& item) const;
-            
-    
-    /*! 
+
+
+    /*!
      * accessors
      */
 
@@ -104,7 +104,7 @@
 
             //! add an item in the right place (and replace the one that is there)
             ssize_t         add(const TYPE& item);
-            
+
             //! editItemAt() MUST NOT change the order of this item
             TYPE&           editItemAt(size_t index) {
                 return *( static_cast<TYPE *>(VectorImpl::editItemLocation(index)) );
@@ -113,7 +113,7 @@
             //! merges a vector into this one
             ssize_t         merge(const Vector<TYPE>& vector);
             ssize_t         merge(const SortedVector<TYPE>& vector);
-            
+
             //! removes an item
             ssize_t         remove(const TYPE&);
 
@@ -121,7 +121,24 @@
     inline  ssize_t         removeItemsAt(size_t index, size_t count = 1);
     //! remove one item
     inline  ssize_t         removeAt(size_t index)  { return removeItemsAt(index); }
-            
+
+    /*
+     * these inlines add some level of compatibility with STL.
+     */
+    typedef TYPE* iterator;
+    typedef TYPE const* const_iterator;
+
+    inline iterator begin() { return editArray(); }
+    inline iterator end()   { return editArray() + size(); }
+    inline const_iterator begin() const { return array(); }
+    inline const_iterator end() const   { return array() + size(); }
+    inline void reserve(size_t n) { setCapacity(n); }
+    inline bool empty() const{ return isEmpty(); }
+    inline iterator erase(iterator pos) {
+        ssize_t index = removeItemsAt(pos-array());
+        return begin() + index;
+    }
+
 protected:
     virtual void    do_construct(void* storage, size_t num) const;
     virtual void    do_destroy(void* storage, size_t num) const;
@@ -159,13 +176,13 @@
 template<class TYPE> inline
 SortedVector<TYPE>& SortedVector<TYPE>::operator = (const SortedVector<TYPE>& rhs) {
     SortedVectorImpl::operator = (rhs);
-    return *this; 
+    return *this;
 }
 
 template<class TYPE> inline
 const SortedVector<TYPE>& SortedVector<TYPE>::operator = (const SortedVector<TYPE>& rhs) const {
     SortedVectorImpl::operator = (rhs);
-    return *this; 
+    return *this;
 }
 
 template<class TYPE> inline
diff --git a/init/init.cpp b/init/init.cpp
index 7c37d28..809a6f5 100644
--- a/init/init.cpp
+++ b/init/init.cpp
@@ -18,6 +18,7 @@
 #include <dirent.h>
 #include <errno.h>
 #include <fcntl.h>
+#include <fstream>
 #include <libgen.h>
 #include <paths.h>
 #include <signal.h>
@@ -248,6 +249,113 @@
     return result;
 }
 
+static void security_failure() {
+    LOG(ERROR) << "Security failure; rebooting into recovery mode...";
+    android_reboot(ANDROID_RB_RESTART2, 0, "recovery");
+    while (true) { pause(); }  // never reached
+}
+
+#define MMAP_RND_PATH "/proc/sys/vm/mmap_rnd_bits"
+#define MMAP_RND_COMPAT_PATH "/proc/sys/vm/mmap_rnd_compat_bits"
+
+/* __attribute__((unused)) due to lack of mips support: see mips block
+ * in set_mmap_rnd_bits_action */
+static bool __attribute__((unused)) set_mmap_rnd_bits_min(int start, int min, bool compat) {
+    std::string path;
+    if (compat) {
+        path = MMAP_RND_COMPAT_PATH;
+    } else {
+        path = MMAP_RND_PATH;
+    }
+    std::ifstream inf(path, std::fstream::in);
+    if (!inf) {
+        LOG(ERROR) << "Cannot open for reading: " << path;
+        return false;
+    }
+    while (start >= min) {
+        // try to write out new value
+        std::string str_val = std::to_string(start);
+        std::ofstream of(path, std::fstream::out);
+        if (!of) {
+            LOG(ERROR) << "Cannot open for writing: " << path;
+            return false;
+        }
+        of << str_val << std::endl;
+        of.close();
+
+        // check to make sure it was recorded
+        inf.seekg(0);
+        std::string str_rec;
+        inf >> str_rec;
+        if (str_val.compare(str_rec) == 0) {
+            break;
+        }
+        start--;
+    }
+    inf.close();
+    if (start < min) {
+        LOG(ERROR) << "Unable to set minimum required entropy " << min << " in " << path;
+        return false;
+    }
+    return true;
+}
+
+/*
+ * Set /proc/sys/vm/mmap_rnd_bits and potentially
+ * /proc/sys/vm/mmap_rnd_compat_bits to the maximum supported values.
+ * Returns -1 if unable to set these to an acceptable value.
+ *
+ * To support this sysctl, the following upstream commits are needed:
+ *
+ * d07e22597d1d mm: mmap: add new /proc tunable for mmap_base ASLR
+ * e0c25d958f78 arm: mm: support ARCH_MMAP_RND_BITS
+ * 8f0d3aa9de57 arm64: mm: support ARCH_MMAP_RND_BITS
+ * 9e08f57d684a x86: mm: support ARCH_MMAP_RND_BITS
+ * ec9ee4acd97c drivers: char: random: add get_random_long()
+ * 5ef11c35ce86 mm: ASLR: use get_random_long()
+ */
+static int set_mmap_rnd_bits_action(const std::vector<std::string>& args)
+{
+    int ret = -1;
+
+    /* values are arch-dependent */
+#if defined(__aarch64__)
+    /* arm64 supports 18 - 33 bits depending on pagesize and VA_SIZE */
+    if (set_mmap_rnd_bits_min(33, 24, false)
+            && set_mmap_rnd_bits_min(16, 16, true)) {
+        ret = 0;
+    }
+#elif defined(__x86_64__)
+    /* x86_64 supports 28 - 32 bits */
+    if (set_mmap_rnd_bits_min(32, 32, false)
+            && set_mmap_rnd_bits_min(16, 16, true)) {
+        ret = 0;
+    }
+#elif defined(__arm__) || defined(__i386__)
+    /* check to see if we're running on 64-bit kernel */
+    bool h64 = !access(MMAP_RND_COMPAT_PATH, F_OK);
+    /* supported 32-bit architecture must have 16 bits set */
+    if (set_mmap_rnd_bits_min(16, 16, h64)) {
+        ret = 0;
+    }
+#elif defined(__mips__) || defined(__mips64__)
+    // TODO: add mips support b/27788820
+    ret = 0;
+#else
+    ERROR("Unknown architecture\n");
+#endif
+
+#ifdef __BRILLO__
+    // TODO: b/27794137
+    ret = 0;
+#endif
+    if (ret == -1) {
+        LOG(ERROR) << "Unable to set adequate mmap entropy value!";
+        security_failure();
+    }
+    return ret;
+}
+
 static int keychord_init_action(const std::vector<std::string>& args)
 {
     keychord_init();
@@ -401,12 +509,6 @@
     return 0;
 }
 
-static void security_failure() {
-    LOG(ERROR) << "Security failure; rebooting into recovery mode...";
-    android_reboot(ANDROID_RB_RESTART2, 0, "recovery");
-    while (true) { pause(); }  // never reached
-}
-
 static void selinux_initialize(bool in_kernel_domain) {
     Timer t;
 
@@ -683,6 +785,7 @@
     am.QueueBuiltinAction(wait_for_coldboot_done_action, "wait_for_coldboot_done");
     // ... so that we can start queuing up actions that require stuff from /dev.
     am.QueueBuiltinAction(mix_hwrng_into_linux_rng_action, "mix_hwrng_into_linux_rng");
+    am.QueueBuiltinAction(set_mmap_rnd_bits_action, "set_mmap_rnd_bits");
     am.QueueBuiltinAction(keychord_init_action, "keychord_init");
     am.QueueBuiltinAction(console_init_action, "console_init");
 
diff --git a/libmemtrack/Android.bp b/libmemtrack/Android.bp
index 98413dd..9310b24 100644
--- a/libmemtrack/Android.bp
+++ b/libmemtrack/Android.bp
@@ -2,13 +2,18 @@
 
 cc_library_shared {
     name: "libmemtrack",
-    srcs: ["memtrack.c"],
+    srcs: ["memtrack.cpp"],
     export_include_dirs: ["include"],
     local_include_dirs: ["include"],
     include_dirs: ["hardware/libhardware/include"],
     shared_libs: [
         "libhardware",
         "liblog",
+        "libbase",
+        "libhidl",
+        "libhwbinder",
+        "libutils",
+        "android.hardware.memtrack@1.0",
     ],
     cflags: [
         "-Wall",
diff --git a/libmemtrack/include/memtrack/memtrack.h b/libmemtrack/include/memtrack/memtrack.h
index 8c0ab89..2134a6f 100644
--- a/libmemtrack/include/memtrack/memtrack.h
+++ b/libmemtrack/include/memtrack/memtrack.h
@@ -35,16 +35,6 @@
 struct memtrack_proc;
 
 /**
- * memtrack_init
- *
- * Must be called once before calling any other functions.  After this function
- * is called, everything else is thread-safe.
- *
- * Returns 0 on success, -errno on error.
- */
-int memtrack_init(void);
-
-/**
  * memtrack_proc_new
  *
  * Return a new handle to hold process memory stats.
diff --git a/libmemtrack/memtrack.c b/libmemtrack/memtrack.c
deleted file mode 100644
index 29cc92c..0000000
--- a/libmemtrack/memtrack.c
+++ /dev/null
@@ -1,203 +0,0 @@
-/*
- * Copyright (C) 2013 The Android Open Source Project
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#define LOG_TAG "memtrack"
-
-#include <memtrack/memtrack.h>
-
-#include <errno.h>
-#include <malloc.h>
-#include <string.h>
-
-#include <android/log.h>
-#include <hardware/memtrack.h>
-
-#define ARRAY_SIZE(x) (sizeof(x)/sizeof((x)[0]))
-
-static const memtrack_module_t *module;
-
-struct memtrack_proc {
-    pid_t pid;
-    struct memtrack_proc_type {
-        enum memtrack_type type;
-        size_t num_records;
-        size_t allocated_records;
-        struct memtrack_record *records;
-    } types[MEMTRACK_NUM_TYPES];
-};
-
-int memtrack_init(void)
-{
-    int err;
-
-    if (module) {
-        return 0;
-    }
-
-    err = hw_get_module(MEMTRACK_HARDWARE_MODULE_ID,
-            (hw_module_t const**)&module);
-    if (err) {
-        ALOGE("Couldn't load %s module (%s)", MEMTRACK_HARDWARE_MODULE_ID,
-                strerror(-err));
-        return err;
-    }
-
-    return module->init(module);
-}
-
-struct memtrack_proc *memtrack_proc_new(void)
-{
-    if (!module) {
-        return NULL;
-    }
-
-    return calloc(sizeof(struct memtrack_proc), 1);
-}
-
-void memtrack_proc_destroy(struct memtrack_proc *p)
-{
-    enum memtrack_type i;
-
-    if (p) {
-        for (i = 0; i < MEMTRACK_NUM_TYPES; i++) {
-            free(p->types[i].records);
-        }
-    }
-    free(p);
-}
-
-static int memtrack_proc_get_type(struct memtrack_proc_type *t,
-            pid_t pid, enum memtrack_type type)
-{
-    size_t num_records = t->num_records;
-    int ret;
-
-retry:
-    ret = module->getMemory(module, pid, type, t->records, &num_records);
-    if (ret) {
-        t->num_records = 0;
-        return ret;
-    }
-    if (num_records > t->allocated_records) {
-        /* Need more records than allocated */
-        free(t->records);
-        t->records = calloc(sizeof(*t->records), num_records);
-        if (!t->records) {
-            return -ENOMEM;
-        }
-        t->allocated_records = num_records;
-        goto retry;
-    }
-    t->num_records = num_records;
-
-    return 0;
-}
-
-/* TODO: sanity checks on return values from HALs:
- *   make sure no records have invalid flags set
- *    - unknown flags
- *    - too many flags of a single category
- *    - missing ACCOUNTED/UNACCOUNTED
- *   make sure there are not overlapping SHARED and SHARED_PSS records
- */
-static int memtrack_proc_sanity_check(struct memtrack_proc *p)
-{
-    (void)p;
-    return 0;
-}
-
-int memtrack_proc_get(struct memtrack_proc *p, pid_t pid)
-{
-    enum memtrack_type i;
-
-    if (!module) {
-        return -EINVAL;
-    }
-
-    if (!p) {
-        return -EINVAL;
-    }
-
-    p->pid = pid;
-    for (i = 0; i < MEMTRACK_NUM_TYPES; i++) {
-        memtrack_proc_get_type(&p->types[i], pid, i);
-    }
-
-    return memtrack_proc_sanity_check(p);
-}
-
-static ssize_t memtrack_proc_sum(struct memtrack_proc *p,
-            enum memtrack_type types[], size_t num_types,
-            unsigned int flags)
-{
-    ssize_t sum = 0;
-    size_t i;
-    size_t j;
-
-    for (i = 0; i < num_types; i++) {
-        enum memtrack_type type = types[i];
-        for (j = 0; j < p->types[type].num_records; j++) {
-            if ((p->types[type].records[j].flags & flags) == flags) {
-                sum += p->types[type].records[j].size_in_bytes;
-            }
-        }
-    }
-
-    return sum;
-}
-
-ssize_t memtrack_proc_graphics_total(struct memtrack_proc *p)
-{
-    enum memtrack_type types[] = { MEMTRACK_TYPE_GRAPHICS };
-    return memtrack_proc_sum(p, types, ARRAY_SIZE(types), 0);
-}
-
-ssize_t memtrack_proc_graphics_pss(struct memtrack_proc *p)
-{
-    enum memtrack_type types[] = { MEMTRACK_TYPE_GRAPHICS };
-    return memtrack_proc_sum(p, types, ARRAY_SIZE(types),
-                MEMTRACK_FLAG_SMAPS_UNACCOUNTED);
-}
-
-ssize_t memtrack_proc_gl_total(struct memtrack_proc *p)
-{
-    enum memtrack_type types[] = { MEMTRACK_TYPE_GL };
-    return memtrack_proc_sum(p, types, ARRAY_SIZE(types), 0);
-}
-
-ssize_t memtrack_proc_gl_pss(struct memtrack_proc *p)
-{
-    enum memtrack_type types[] = { MEMTRACK_TYPE_GL };
-    return memtrack_proc_sum(p, types, ARRAY_SIZE(types),
-                MEMTRACK_FLAG_SMAPS_UNACCOUNTED);
-}
-
-ssize_t memtrack_proc_other_total(struct memtrack_proc *p)
-{
-    enum memtrack_type types[] = { MEMTRACK_TYPE_MULTIMEDIA,
-                                        MEMTRACK_TYPE_CAMERA,
-                                        MEMTRACK_TYPE_OTHER };
-    return memtrack_proc_sum(p, types, ARRAY_SIZE(types), 0);
-}
-
-ssize_t memtrack_proc_other_pss(struct memtrack_proc *p)
-{
-    enum memtrack_type types[] = { MEMTRACK_TYPE_MULTIMEDIA,
-                                        MEMTRACK_TYPE_CAMERA,
-                                        MEMTRACK_TYPE_OTHER };
-    return memtrack_proc_sum(p, types, ARRAY_SIZE(types),
-                MEMTRACK_FLAG_SMAPS_UNACCOUNTED);
-}
diff --git a/libmemtrack/memtrack.cpp b/libmemtrack/memtrack.cpp
new file mode 100644
index 0000000..9b874da
--- /dev/null
+++ b/libmemtrack/memtrack.cpp
@@ -0,0 +1,170 @@
+/*
+ * Copyright (C) 2013 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#define LOG_TAG "memtrack"
+#include <android/hardware/memtrack/1.0/IMemtrack.h>
+#include <memtrack/memtrack.h>
+
+#include <errno.h>
+#include <malloc.h>
+#include <vector>
+#include <string.h>
+#include <mutex>
+
+using android::hardware::memtrack::V1_0::IMemtrack;
+using android::hardware::memtrack::V1_0::MemtrackType;
+using android::hardware::memtrack::V1_0::MemtrackRecord;
+using android::hardware::memtrack::V1_0::MemtrackFlag;
+using android::hardware::memtrack::V1_0::MemtrackStatus;
+using android::hardware::hidl_vec;
+
+struct memtrack_proc_type {
+    MemtrackType type;
+    std::vector<MemtrackRecord> records;
+};
+
+struct memtrack_proc {
+    pid_t pid;
+    memtrack_proc_type types[static_cast<int>(MemtrackType::NUM_TYPES)];
+};
+
+//TODO(b/31632518)
+static android::sp<IMemtrack> get_instance() {
+    static android::sp<IMemtrack> module = IMemtrack::getService("memtrack");
+    if (module == nullptr) {
+        ALOGE("Couldn't load memtrack module");
+    }
+    return module;
+}
+
+memtrack_proc *memtrack_proc_new(void)
+{
+    return new memtrack_proc();
+}
+
+void memtrack_proc_destroy(memtrack_proc *p)
+{
+    delete(p);
+}
+
+static int memtrack_proc_get_type(memtrack_proc_type *t,
+        pid_t pid, MemtrackType type)
+{
+    int err = 0;
+    android::sp<IMemtrack> memtrack = get_instance();
+    if (memtrack == nullptr)
+        return -1;
+
+    memtrack->getMemory(pid, type,
+        [&t, &err](MemtrackStatus status, hidl_vec<MemtrackRecord> records) {
+            if (status != MemtrackStatus::SUCCESS) {
+                err = -1;
+                t->records.resize(0);
+            }
+            t->records.resize(records.size());
+            for (size_t i = 0; i < records.size(); i++) {
+                t->records[i].sizeInBytes = records[i].sizeInBytes;
+                t->records[i].flags = records[i].flags;
+            }
+    });
+    return err;
+}
+
+/* TODO: sanity checks on return values from HALs:
+ *   make sure no records have invalid flags set
+ *    - unknown flags
+ *    - too many flags of a single category
+ *    - missing ACCOUNTED/UNACCOUNTED
+ *   make sure there are not overlapping SHARED and SHARED_PSS records
+ */
+static int memtrack_proc_sanity_check(memtrack_proc* /*p*/)
+{
+    return 0;
+}
+
+int memtrack_proc_get(memtrack_proc *p, pid_t pid)
+{
+    if (!p) {
+        return -EINVAL;
+    }
+
+    p->pid = pid;
+    for (uint32_t i = 0; i < (uint32_t)MemtrackType::NUM_TYPES; i++) {
+        int ret = memtrack_proc_get_type(&p->types[i], pid, (MemtrackType)i);
+        if (ret != 0)
+           return ret;
+    }
+
+    return memtrack_proc_sanity_check(p);
+}
+
+static ssize_t memtrack_proc_sum(memtrack_proc *p,
+        const std::vector<MemtrackType>& types, uint32_t flags)
+{
+    ssize_t sum = 0;
+
+    for (size_t i = 0; i < types.size(); i++) {
+        memtrack_proc_type type = p->types[static_cast<int>(types[i])];
+        std::vector<MemtrackRecord> records = type.records;
+        for (size_t j = 0; j < records.size(); j++) {
+            if ((records[j].flags & flags) == flags) {
+                sum += records[j].sizeInBytes;
+            }
+        }
+    }
+
+    return sum;
+}
+
+ssize_t memtrack_proc_graphics_total(memtrack_proc *p)
+{
+    std::vector<MemtrackType> types = {MemtrackType::GRAPHICS};
+    return memtrack_proc_sum(p, types, 0);
+}
+
+ssize_t memtrack_proc_graphics_pss(memtrack_proc *p)
+{
+    std::vector<MemtrackType> types = { MemtrackType::GRAPHICS };
+    return memtrack_proc_sum(p, types,
+            (uint32_t)MemtrackFlag::SMAPS_UNACCOUNTED);
+}
+
+ssize_t memtrack_proc_gl_total(memtrack_proc *p)
+{
+    std::vector<MemtrackType> types = { MemtrackType::GL };
+    return memtrack_proc_sum(p, types, 0);
+}
+
+ssize_t memtrack_proc_gl_pss(memtrack_proc *p)
+{
+    std::vector<MemtrackType> types = { MemtrackType::GL };
+    return memtrack_proc_sum(p, types,
+            (uint32_t)MemtrackFlag::SMAPS_UNACCOUNTED);
+}
+
+ssize_t memtrack_proc_other_total(memtrack_proc *p)
+{
+    std::vector<MemtrackType> types = { MemtrackType::MULTIMEDIA,
+            MemtrackType::CAMERA, MemtrackType::OTHER };
+    return memtrack_proc_sum(p, types, 0);
+}
+
+ssize_t memtrack_proc_other_pss(memtrack_proc *p)
+{
+    std::vector<MemtrackType> types = { MemtrackType::MULTIMEDIA,
+            MemtrackType::CAMERA, MemtrackType::OTHER };
+    return memtrack_proc_sum(p, types,
+            (uint32_t)MemtrackFlag::SMAPS_UNACCOUNTED);
+}
diff --git a/libmemtrack/memtrack_test.c b/libmemtrack/memtrack_test.c
index eaadfa7..77c935e 100644
--- a/libmemtrack/memtrack_test.c
+++ b/libmemtrack/memtrack_test.c
@@ -82,12 +82,6 @@
     (void)argc;
     (void)argv;
 
-    ret = memtrack_init();
-    if (ret < 0) {
-        fprintf(stderr, "failed to initialize HAL: %s (%d)\n", strerror(-ret), ret);
-        exit(EXIT_FAILURE);
-    }
-
     ret = pm_kernel_create(&ker);
     if (ret) {
         fprintf(stderr, "Error creating kernel interface -- "
diff --git a/libsparse/simg_dump.py b/libsparse/simg_dump.py
index c70d45f..82a03ad 100755
--- a/libsparse/simg_dump.py
+++ b/libsparse/simg_dump.py
@@ -15,43 +15,64 @@
 # limitations under the License.
 
 from __future__ import print_function
-import getopt, posixpath, signal, struct, sys
+import csv
+import getopt
+import hashlib
+import posixpath
+import signal
+import struct
+import sys
+
 
 def usage(argv0):
   print("""
-Usage: %s [-v] sparse_image_file ...
+Usage: %s [-v] [-s] [-c <filename>] sparse_image_file ...
  -v             verbose output
-""" % ( argv0 ))
+ -s             show sha1sum of data blocks
+ -c <filename>  save .csv file of blocks
+""" % (argv0))
   sys.exit(2)
 
-def main():
 
+def main():
   signal.signal(signal.SIGPIPE, signal.SIG_DFL)
 
   me = posixpath.basename(sys.argv[0])
 
   # Parse the command line
-  verbose = 0			# -v
+  verbose = 0                   # -v
+  showhash = 0                  # -s
+  csvfilename = None            # -c
   try:
     opts, args = getopt.getopt(sys.argv[1:],
-                               "v",
-                               ["verbose"])
+                               "vsc:",
+                               ["verbose", "showhash", "csvfile"])
   except getopt.GetoptError, e:
     print(e)
     usage(me)
   for o, a in opts:
     if o in ("-v", "--verbose"):
       verbose += 1
+    elif o in ("-s", "--showhash"):
+      showhash = True
+    elif o in ("-c", "--csvfile"):
+      csvfilename = a
     else:
       print("Unrecognized option \"%s\"" % (o))
       usage(me)
 
-  if len(args) == 0:
+  if not args:
     print("No sparse_image_file specified")
     usage(me)
 
+  if csvfilename:
+    csvfile = open(csvfilename, "wb")
+    csvwriter = csv.writer(csvfile)
+
+  output = verbose or csvfilename or showhash
+
   for path in args:
-    FH = open(path, 'rb')
+    FH = open(path, "rb")
     header_bin = FH.read(28)
     header = struct.unpack("<I4H4I", header_bin)
 
@@ -88,71 +109,99 @@
     if image_checksum != 0:
       print("checksum=0x%08X" % (image_checksum))
 
-    if not verbose:
+    if not output:
       continue
-    print("            input_bytes      output_blocks")
-    print("chunk    offset     number  offset  number")
+
+    if verbose > 0:
+      print("            input_bytes      output_blocks")
+      print("chunk    offset     number  offset  number")
+
+    if csvfilename:
+      csvwriter.writerow(["chunk", "input offset", "input bytes",
+                          "output offset", "output blocks", "type", "hash"])
+
     offset = 0
-    for i in xrange(1,total_chunks+1):
+    for i in xrange(1, total_chunks + 1):
       header_bin = FH.read(12)
       header = struct.unpack("<2H2I", header_bin)
       chunk_type = header[0]
-      reserved1 = header[1]
       chunk_sz = header[2]
       total_sz = header[3]
       data_sz = total_sz - 12
+      curhash = ""
+      curtype = ""
+      curpos = FH.tell()
 
-      print("%4u %10u %10u %7u %7u" % (i, FH.tell(), data_sz, offset, chunk_sz),
-            end=" ")
+      if verbose > 0:
+        print("%4u %10u %10u %7u %7u" % (i, curpos, data_sz, offset, chunk_sz),
+              end=" ")
 
       if chunk_type == 0xCAC1:
         if data_sz != (chunk_sz * blk_sz):
           print("Raw chunk input size (%u) does not match output size (%u)"
                 % (data_sz, chunk_sz * blk_sz))
-          break;
+          break
         else:
-          print("Raw data", end="")
-          FH.read(data_sz)
+          curtype = "Raw data"
+          data = FH.read(data_sz)
+          if showhash:
+            h = hashlib.sha1()
+            h.update(data)
+            curhash = h.hexdigest()
       elif chunk_type == 0xCAC2:
         if data_sz != 4:
           print("Fill chunk should have 4 bytes of fill, but this has %u"
-                % (data_sz), end="")
-          break;
+                % (data_sz))
+          break
         else:
           fill_bin = FH.read(4)
           fill = struct.unpack("<I", fill_bin)
-          print("Fill with 0x%08X" % (fill))
+          curtype = format("Fill with 0x%08X" % (fill))
+          if showhash:
+            h = hashlib.sha1()
+            data = fill_bin * (blk_sz / 4);
+            for block in xrange(chunk_sz):
+              h.update(data)
+            curhash = h.hexdigest()
       elif chunk_type == 0xCAC3:
         if data_sz != 0:
           print("Don't care chunk input size is non-zero (%u)" % (data_sz))
-          break;
+          break
         else:
-          print("Don't care", end="")
+          curtype = "Don't care"
       elif chunk_type == 0xCAC4:
         if data_sz != 4:
           print("CRC32 chunk should have 4 bytes of CRC, but this has %u"
-                % (data_sz), end="")
-          break;
+                % (data_sz))
+          break
         else:
           crc_bin = FH.read(4)
           crc = struct.unpack("<I", crc_bin)
-          print("Unverified CRC32 0x%08X" % (crc))
+          curtype = format("Unverified CRC32 0x%08X" % (crc))
       else:
-          print("Unknown chunk type 0x%04X" % (chunk_type), end="")
-          break;
+        print("Unknown chunk type 0x%04X" % (chunk_type))
+        break
 
-      if verbose > 1:
-        header = struct.unpack("<12B", header_bin)
-        print(" (%02X%02X %02X%02X %02X%02X%02X%02X %02X%02X%02X%02X)"
-              % (header[0], header[1], header[2], header[3],
-                 header[4], header[5], header[6], header[7],
-                 header[8], header[9], header[10], header[11]))
-      else:
-        print()
+      if verbose > 0:
+        print("%-18s" % (curtype), end=" ")
+
+        if verbose > 1:
+          header = struct.unpack("<12B", header_bin)
+          print(" (%02X%02X %02X%02X %02X%02X%02X%02X %02X%02X%02X%02X)"
+                % (header[0], header[1], header[2], header[3],
+                   header[4], header[5], header[6], header[7],
+                   header[8], header[9], header[10], header[11]), end=" ")
+
+        print(curhash)
+
+      if csvfilename:
+        csvwriter.writerow([i, curpos, data_sz, offset, chunk_sz, curtype,
+                            curhash])
 
       offset += chunk_sz
 
-    print("     %10u            %7u         End" % (FH.tell(), offset))
+    if verbose > 0:
+      print("     %10u            %7u         End" % (FH.tell(), offset))
 
     if total_blks != offset:
       print("The header said we should have %u output blocks, but we saw %u"
@@ -163,6 +212,9 @@
       print("There were %u bytes of extra data at the end of the file."
             % (junk_len))
 
+  if csvfilename:
+    csvfile.close()
+
   sys.exit(0)
 
 if __name__ == "__main__":
diff --git a/libusbhost/include/usbhost/usbhost.h b/libusbhost/include/usbhost/usbhost.h
index 84594c8..a8dd673 100644
--- a/libusbhost/include/usbhost/usbhost.h
+++ b/libusbhost/include/usbhost/usbhost.h
@@ -144,17 +144,17 @@
  * usb_device_get_product_name and usb_device_get_serial.
  * Call free() to free the result when you are done with it.
  */
-char* usb_device_get_string(struct usb_device *device, int id);
+char* usb_device_get_string(struct usb_device *device, int id, int timeout);
 
 /* Returns the manufacturer name for the USB device.
  * Call free() to free the result when you are done with it.
  */
-char* usb_device_get_manufacturer_name(struct usb_device *device);
+char* usb_device_get_manufacturer_name(struct usb_device *device, int timeout);
 
 /* Returns the product name for the USB device.
  * Call free() to free the result when you are done with it.
  */
-char* usb_device_get_product_name(struct usb_device *device);
+char* usb_device_get_product_name(struct usb_device *device, int timeout);
 
 /* Returns the version number for the USB device.
  */
@@ -163,7 +163,7 @@
 /* Returns the USB serial number for the USB device.
  * Call free() to free the result when you are done with it.
  */
-char* usb_device_get_serial(struct usb_device *device);
+char* usb_device_get_serial(struct usb_device *device, int timeout);
 
 /* Returns true if we have write access to the USB device,
  * and false if we only have access to the USB device configuration.
@@ -232,10 +232,11 @@
 /* Submits a read or write request on the specified device */
 int usb_request_queue(struct usb_request *req);
 
- /* Waits for the results of a previous usb_request_queue operation.
+ /* Waits for the results of a previous usb_request_queue operation. timeoutMillis == -1 requests
+  * to wait forever.
   * Returns a usb_request, or NULL for error.
   */
-struct usb_request *usb_request_wait(struct usb_device *dev);
+struct usb_request *usb_request_wait(struct usb_device *dev, int timeoutMillis);
 
 /* Cancels a pending usb_request_queue() operation. */
 int usb_request_cancel(struct usb_request *req);
diff --git a/libusbhost/usbhost.c b/libusbhost/usbhost.c
index 68aca17..7adb4f2 100644
--- a/libusbhost/usbhost.c
+++ b/libusbhost/usbhost.c
@@ -14,6 +14,10 @@
  * limitations under the License.
  */
 
+#ifndef _GNU_SOURCE
+#define _GNU_SOURCE
+#endif
+
 // #define DEBUG 1
 #if DEBUG
 
@@ -43,6 +47,7 @@
 #include <fcntl.h>
 #include <errno.h>
 #include <ctype.h>
+#include <poll.h>
 #include <pthread.h>
 
 #include <linux/usbdevice_fs.h>
@@ -449,7 +454,7 @@
     return (struct usb_device_descriptor*)device->desc;
 }
 
-char* usb_device_get_string(struct usb_device *device, int id)
+char* usb_device_get_string(struct usb_device *device, int id, int timeout)
 {
     char string[256];
     __u16 buffer[MAX_STRING_DESCRIPTOR_LENGTH / sizeof(__u16)];
@@ -465,7 +470,8 @@
     // read list of supported languages
     result = usb_device_control_transfer(device,
             USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_DEVICE, USB_REQ_GET_DESCRIPTOR,
-            (USB_DT_STRING << 8) | 0, 0, languages, sizeof(languages), 0);
+            (USB_DT_STRING << 8) | 0, 0, languages, sizeof(languages),
+            timeout);
     if (result > 0)
         languageCount = (result - 2) / 2;
 
@@ -474,7 +480,8 @@
 
         result = usb_device_control_transfer(device,
                 USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_DEVICE, USB_REQ_GET_DESCRIPTOR,
-                (USB_DT_STRING << 8) | id, languages[i], buffer, sizeof(buffer), 0);
+                (USB_DT_STRING << 8) | id, languages[i], buffer, sizeof(buffer),
+                timeout);
         if (result > 0) {
             int i;
             // skip first word, and copy the rest to the string, changing shorts to bytes.
@@ -489,16 +496,16 @@
     return NULL;
 }
 
-char* usb_device_get_manufacturer_name(struct usb_device *device)
+char* usb_device_get_manufacturer_name(struct usb_device *device, int timeout)
 {
     struct usb_device_descriptor *desc = (struct usb_device_descriptor *)device->desc;
-    return usb_device_get_string(device, desc->iManufacturer);
+    return usb_device_get_string(device, desc->iManufacturer, timeout);
 }
 
-char* usb_device_get_product_name(struct usb_device *device)
+char* usb_device_get_product_name(struct usb_device *device, int timeout)
 {
     struct usb_device_descriptor *desc = (struct usb_device_descriptor *)device->desc;
-    return usb_device_get_string(device, desc->iProduct);
+    return usb_device_get_string(device, desc->iProduct, timeout);
 }
 
 int usb_device_get_version(struct usb_device *device)
@@ -507,10 +514,10 @@
     return desc->bcdUSB;
 }
 
-char* usb_device_get_serial(struct usb_device *device)
+char* usb_device_get_serial(struct usb_device *device, int timeout)
 {
     struct usb_device_descriptor *desc = (struct usb_device_descriptor *)device->desc;
-    return usb_device_get_string(device, desc->iSerialNumber);
+    return usb_device_get_string(device, desc->iSerialNumber, timeout);
 }
 
 int usb_device_is_writeable(struct usb_device *device)
@@ -681,29 +688,38 @@
     return res;
 }
 
-struct usb_request *usb_request_wait(struct usb_device *dev)
+struct usb_request *usb_request_wait(struct usb_device *dev, int timeoutMillis)
 {
-    struct usbdevfs_urb *urb = NULL;
-    struct usb_request *req = NULL;
+    // Poll until a request becomes available if there is a timeout
+    if (timeoutMillis > 0) {
+        struct pollfd p = {.fd = dev->fd, .events = POLLOUT, .revents = 0};
 
-    while (1) {
-        int res = ioctl(dev->fd, USBDEVFS_REAPURB, &urb);
-        D("USBDEVFS_REAPURB returned %d\n", res);
-        if (res < 0) {
-            if(errno == EINTR) {
-                continue;
-            }
-            D("[ reap urb - error ]\n");
+        int res = poll(&p, 1, timeoutMillis);
+
+        if (res != 1 || p.revents != POLLOUT) {
+            D("[ poll - event %d, error %d]\n", p.revents, errno);
             return NULL;
-        } else {
-            D("[ urb @%p status = %d, actual = %d ]\n",
-                urb, urb->status, urb->actual_length);
-            req = (struct usb_request*)urb->usercontext;
-            req->actual_length = urb->actual_length;
         }
-        break;
     }
-    return req;
+
+    // Read the request. This should usually succeed as we polled before, but it can fail e.g. when
+    // two threads are reading usb requests at the same time and only a single request is available.
+    struct usbdevfs_urb *urb = NULL;
+    int res = TEMP_FAILURE_RETRY(ioctl(dev->fd, timeoutMillis == -1 ? USBDEVFS_REAPURB :
+                                       USBDEVFS_REAPURBNDELAY, &urb));
+    D("%s returned %d\n", timeoutMillis == -1 ? "USBDEVFS_REAPURB" : "USBDEVFS_REAPURBNDELAY", res);
+
+    if (res < 0) {
+        D("[ reap urb - error %d]\n", errno);
+        return NULL;
+    } else {
+        D("[ urb @%p status = %d, actual = %d ]\n", urb, urb->status, urb->actual_length);
+
+        struct usb_request *req = (struct usb_request*)urb->usercontext;
+        req->actual_length = urb->actual_length;
+
+        return req;
+    }
 }
 
 int usb_request_cancel(struct usb_request *req)
@@ -711,4 +727,3 @@
     struct usbdevfs_urb *urb = ((struct usbdevfs_urb*)req->private_data);
     return ioctl(req->dev->fd, USBDEVFS_DISCARDURB, urb);
 }
-
diff --git a/libutils/Looper.cpp b/libutils/Looper.cpp
index 26e27cf..3edc536 100644
--- a/libutils/Looper.cpp
+++ b/libutils/Looper.cpp
@@ -83,6 +83,7 @@
 
 Looper::~Looper() {
     close(mWakeEventFd);
+    mWakeEventFd = -1;
     if (mEpollFd >= 0) {
         close(mEpollFd);
     }
@@ -412,7 +413,8 @@
     ssize_t nWrite = TEMP_FAILURE_RETRY(write(mWakeEventFd, &inc, sizeof(uint64_t)));
     if (nWrite != sizeof(uint64_t)) {
         if (errno != EAGAIN) {
-            ALOGW("Could not write wake signal: %s", strerror(errno));
+            LOG_ALWAYS_FATAL("Could not write wake signal to fd %d: %s",
+                    mWakeEventFd, strerror(errno));
         }
     }
 }
diff --git a/libutils/SharedBuffer.cpp b/libutils/SharedBuffer.cpp
index 269326a..229e3f2 100644
--- a/libutils/SharedBuffer.cpp
+++ b/libutils/SharedBuffer.cpp
@@ -113,16 +113,26 @@
 
 int32_t SharedBuffer::release(uint32_t flags) const
 {
-    int32_t prev = 1;
-    if (onlyOwner()
-            || (((prev = mRefs.fetch_sub(1, std::memory_order_release)) == 1)
-                && (atomic_thread_fence(std::memory_order_acquire), true))) {
+    const bool useDealloc = ((flags & eKeepStorage) == 0);
+    if (onlyOwner()) {
+        // Since we're the only owner, our reference count goes to zero.
         mRefs.store(0, std::memory_order_relaxed);
-        if ((flags & eKeepStorage) == 0) {
-            free(const_cast<SharedBuffer*>(this));
+        if (useDealloc) {
+            dealloc(this);
+        }
+        // As the only owner, our previous reference count was 1.
+        return 1;
+    }
+    // There's multiple owners, we need to use an atomic decrement.
+    int32_t prevRefCount = mRefs.fetch_sub(1, std::memory_order_release);
+    if (prevRefCount == 1) {
+        // We're the last reference, we need the acquire fence.
+        atomic_thread_fence(std::memory_order_acquire);
+        if (useDealloc) {
+            dealloc(this);
         }
     }
-    return prev;
+    return prevRefCount;
 }
 
 
diff --git a/libziparchive/testdata/bad_filename.zip b/libziparchive/testdata/bad_filename.zip
new file mode 100644
index 0000000..294eaf5
--- /dev/null
+++ b/libziparchive/testdata/bad_filename.zip
Binary files differ
diff --git a/libziparchive/testdata/crash.apk b/libziparchive/testdata/crash.apk
new file mode 100644
index 0000000..d6dd52d
--- /dev/null
+++ b/libziparchive/testdata/crash.apk
Binary files differ
diff --git a/libziparchive/zip_archive.cc b/libziparchive/zip_archive.cc
index a07df30..23cbff3 100644
--- a/libziparchive/zip_archive.cc
+++ b/libziparchive/zip_archive.cc
@@ -373,6 +373,11 @@
   archive->hash_table_size = RoundUpPower2(1 + (num_entries * 4) / 3);
   archive->hash_table = reinterpret_cast<ZipString*>(calloc(archive->hash_table_size,
       sizeof(ZipString)));
+  if (archive->hash_table == nullptr) {
+    ALOGW("Zip: unable to allocate the %u-entry hash_table, entry size: %zu",
+          archive->hash_table_size, sizeof(ZipString));
+    return -1;
+  }
 
   /*
    * Walk through the central directory, adding entries to the hash
@@ -405,6 +410,11 @@
     const uint16_t comment_length = cdr->comment_length;
     const uint8_t* file_name = ptr + sizeof(CentralDirectoryRecord);
 
+    if (file_name + file_name_length > cd_end) {
+      ALOGW("Zip: file name boundary exceeds the central directory range, file_name_length: "
+            "%" PRIx16 ", cd_length: %zu", file_name_length, cd_length);
+      return -1;
+    }
     /* check that file name is valid UTF-8 and doesn't contain NUL (U+0000) characters */
     if (!IsValidEntryName(file_name, file_name_length)) {
       return -1;
diff --git a/libziparchive/zip_archive_test.cc b/libziparchive/zip_archive_test.cc
index 9dd6cc0..493a0ce 100644
--- a/libziparchive/zip_archive_test.cc
+++ b/libziparchive/zip_archive_test.cc
@@ -38,6 +38,8 @@
 static const std::string kValidZip = "valid.zip";
 static const std::string kLargeZip = "large.zip";
 static const std::string kBadCrcZip = "bad_crc.zip";
+static const std::string kCrashApk = "crash.apk";
+static const std::string kBadFilenameZip = "bad_filename.zip";
 static const std::string kUpdateZip = "dummy-update.zip";
 
 static const std::vector<uint8_t> kATxtContents {
@@ -83,7 +85,15 @@
 TEST(ziparchive, Open) {
   ZipArchiveHandle handle;
   ASSERT_EQ(0, OpenArchiveWrapper(kValidZip, &handle));
+  CloseArchive(handle);
 
+  ASSERT_EQ(-1, OpenArchiveWrapper(kBadFilenameZip, &handle));
+  CloseArchive(handle);
+}
+
+TEST(ziparchive, OutOfBound) {
+  ZipArchiveHandle handle;
+  ASSERT_EQ(-8, OpenArchiveWrapper(kCrashApk, &handle));
   CloseArchive(handle);
 }
 
diff --git a/rootdir/init.rc b/rootdir/init.rc
index 0eb7f0b..8f0b932 100644
--- a/rootdir/init.rc
+++ b/rootdir/init.rc
@@ -302,7 +302,8 @@
     # Mount shared so changes propagate into child namespaces
     mount rootfs rootfs / shared rec
     # Mount default storage into root namespace
-    mount none /mnt/runtime/default /storage slave bind rec
+    mount none /mnt/runtime/default /storage bind rec
+    mount none none /storage slave rec
 
     # Make sure /sys/kernel/debug (if present) is labeled properly
     restorecon_recursive /sys/kernel/debug
diff --git a/sdcard/fuse.cpp b/sdcard/fuse.cpp
index 4f1ca0d..28b191a 100644
--- a/sdcard/fuse.cpp
+++ b/sdcard/fuse.cpp
@@ -997,7 +997,7 @@
 {
     struct node* node;
     char path[PATH_MAX];
-    struct fuse_open_out out;
+    struct fuse_open_out out = {};
     struct handle *h;
 
     pthread_mutex_lock(&fuse->global->lock);
@@ -1026,13 +1026,6 @@
     }
     out.fh = ptr_to_id(h);
     out.open_flags = 0;
-
-#ifdef FUSE_SHORTCIRCUIT
-    out.lower_fd = h->fd;
-#else
-    out.padding = 0;
-#endif
-
     fuse_reply(fuse, hdr->unique, &out, sizeof(out));
     return NO_STATUS;
 }
@@ -1169,7 +1162,7 @@
 {
     struct node* node;
     char path[PATH_MAX];
-    struct fuse_open_out out;
+    struct fuse_open_out out = {};
     struct dirhandle *h;
 
     pthread_mutex_lock(&fuse->global->lock);
@@ -1196,13 +1189,6 @@
     }
     out.fh = ptr_to_id(h);
     out.open_flags = 0;
-
-#ifdef FUSE_SHORTCIRCUIT
-    out.lower_fd = -1;
-#else
-    out.padding = 0;
-#endif
-
     fuse_reply(fuse, hdr->unique, &out, sizeof(out));
     return NO_STATUS;
 }
@@ -1285,11 +1271,6 @@
     out.major = FUSE_KERNEL_VERSION;
     out.max_readahead = req->max_readahead;
     out.flags = FUSE_ATOMIC_O_TRUNC | FUSE_BIG_WRITES;
-
-#ifdef FUSE_SHORTCIRCUIT
-    out.flags |= FUSE_SHORTCIRCUIT;
-#endif
-
     out.max_background = 32;
     out.congestion_threshold = 32;
     out.max_write = MAX_WRITE;