diff --git a/libsystem/Android.bp b/libsystem/Android.bp
new file mode 100644
index 0000000..4d076d5
--- /dev/null
+++ b/libsystem/Android.bp
@@ -0,0 +1,4 @@
+cc_library_headers {
+    name: "libsystem_headers",
+    export_include_dirs: ["include"],
+}
diff --git a/libsystem/include/system/camera.h b/libsystem/include/system/camera.h
new file mode 100644
index 0000000..5d0873a
--- /dev/null
+++ b/libsystem/include/system/camera.h
@@ -0,0 +1,298 @@
+/*
+ * Copyright (C) 2011 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef SYSTEM_CORE_INCLUDE_ANDROID_CAMERA_H
+#define SYSTEM_CORE_INCLUDE_ANDROID_CAMERA_H
+
+#include <stdint.h>
+#include <sys/cdefs.h>
+#include <sys/types.h>
+#include <cutils/native_handle.h>
+#include <hardware/hardware.h>
+#include <hardware/gralloc.h>
+
+__BEGIN_DECLS
+
+/**
+ * A set of bit masks for specifying how the received preview frames are
+ * handled before the previewCallback() call.
+ *
+ * The least significant 3 bits of an "int" value are used for this purpose:
+ *
+ * ..... 0 0 0
+ *       ^ ^ ^
+ *       | | |---------> determine whether the callback is enabled or not
+ *       | |-----------> determine whether the callback is one-shot or not
+ *       |-------------> determine whether the frame is copied out or not
+ *
+ * WARNING: When a frame is sent directly without copying, it is the frame
+ * receiver's responsiblity to make sure that the frame data won't get
+ * corrupted by subsequent preview frames filled by the camera. This flag is
+ * recommended only when copying out data brings significant performance price
+ * and the handling/processing of the received frame data is always faster than
+ * the preview frame rate so that data corruption won't occur.
+ *
+ * For instance,
+ * 1. 0x00 disables the callback. In this case, copy out and one shot bits
+ *    are ignored.
+ * 2. 0x01 enables a callback without copying out the received frames. A
+ *    typical use case is the Camcorder application to avoid making costly
+ *    frame copies.
+ * 3. 0x05 is enabling a callback with frame copied out repeatedly. A typical
+ *    use case is the Camera application.
+ * 4. 0x07 is enabling a callback with frame copied out only once. A typical
+ *    use case is the Barcode scanner application.
+ */
+
+enum {
+    CAMERA_FRAME_CALLBACK_FLAG_ENABLE_MASK = 0x01,
+    CAMERA_FRAME_CALLBACK_FLAG_ONE_SHOT_MASK = 0x02,
+    CAMERA_FRAME_CALLBACK_FLAG_COPY_OUT_MASK = 0x04,
+    /** Typical use cases */
+    CAMERA_FRAME_CALLBACK_FLAG_NOOP = 0x00,
+    CAMERA_FRAME_CALLBACK_FLAG_CAMCORDER = 0x01,
+    CAMERA_FRAME_CALLBACK_FLAG_CAMERA = 0x05,
+    CAMERA_FRAME_CALLBACK_FLAG_BARCODE_SCANNER = 0x07
+};
+
+/** msgType in notifyCallback and dataCallback functions */
+enum {
+    CAMERA_MSG_ERROR = 0x0001,            // notifyCallback
+    CAMERA_MSG_SHUTTER = 0x0002,          // notifyCallback
+    CAMERA_MSG_FOCUS = 0x0004,            // notifyCallback
+    CAMERA_MSG_ZOOM = 0x0008,             // notifyCallback
+    CAMERA_MSG_PREVIEW_FRAME = 0x0010,    // dataCallback
+    CAMERA_MSG_VIDEO_FRAME = 0x0020,      // data_timestamp_callback
+    CAMERA_MSG_POSTVIEW_FRAME = 0x0040,   // dataCallback
+    CAMERA_MSG_RAW_IMAGE = 0x0080,        // dataCallback
+    CAMERA_MSG_COMPRESSED_IMAGE = 0x0100, // dataCallback
+    CAMERA_MSG_RAW_IMAGE_NOTIFY = 0x0200, // dataCallback
+    // Preview frame metadata. This can be combined with
+    // CAMERA_MSG_PREVIEW_FRAME in dataCallback. For example, the apps can
+    // request FRAME and METADATA. Or the apps can request only FRAME or only
+    // METADATA.
+    CAMERA_MSG_PREVIEW_METADATA = 0x0400, // dataCallback
+    // Notify on autofocus start and stop. This is useful in continuous
+    // autofocus - FOCUS_MODE_CONTINUOUS_VIDEO and FOCUS_MODE_CONTINUOUS_PICTURE.
+    CAMERA_MSG_FOCUS_MOVE = 0x0800,       // notifyCallback
+    CAMERA_MSG_ALL_MSGS = 0xFFFF
+};
+
+/** cmdType in sendCommand functions */
+enum {
+    CAMERA_CMD_START_SMOOTH_ZOOM = 1,
+    CAMERA_CMD_STOP_SMOOTH_ZOOM = 2,
+
+    /**
+     * Set the clockwise rotation of preview display (setPreviewDisplay) in
+     * degrees. This affects the preview frames and the picture displayed after
+     * snapshot. This method is useful for portrait mode applications. Note
+     * that preview display of front-facing cameras is flipped horizontally
+     * before the rotation, that is, the image is reflected along the central
+     * vertical axis of the camera sensor. So the users can see themselves as
+     * looking into a mirror.
+     *
+     * This does not affect the order of byte array of
+     * CAMERA_MSG_PREVIEW_FRAME, CAMERA_MSG_VIDEO_FRAME,
+     * CAMERA_MSG_POSTVIEW_FRAME, CAMERA_MSG_RAW_IMAGE, or
+     * CAMERA_MSG_COMPRESSED_IMAGE. This is allowed to be set during preview
+     * since API level 14.
+     */
+    CAMERA_CMD_SET_DISPLAY_ORIENTATION = 3,
+
+    /**
+     * cmdType to disable/enable shutter sound. In sendCommand passing arg1 =
+     * 0 will disable, while passing arg1 = 1 will enable the shutter sound.
+     */
+    CAMERA_CMD_ENABLE_SHUTTER_SOUND = 4,
+
+    /* cmdType to play recording sound */
+    CAMERA_CMD_PLAY_RECORDING_SOUND = 5,
+
+    /**
+     * Start the face detection. This should be called after preview is started.
+     * The camera will notify the listener of CAMERA_MSG_FACE and the detected
+     * faces in the preview frame. The detected faces may be the same as the
+     * previous ones. Apps should call CAMERA_CMD_STOP_FACE_DETECTION to stop
+     * the face detection. This method is supported if CameraParameters
+     * KEY_MAX_NUM_HW_DETECTED_FACES or KEY_MAX_NUM_SW_DETECTED_FACES is
+     * bigger than 0. Hardware and software face detection should not be running
+     * at the same time. If the face detection has started, apps should not send
+     * this again.
+     *
+     * In hardware face detection mode, CameraParameters KEY_WHITE_BALANCE,
+     * KEY_FOCUS_AREAS and KEY_METERING_AREAS have no effect.
+     *
+     * arg1 is the face detection type. It can be CAMERA_FACE_DETECTION_HW or
+     * CAMERA_FACE_DETECTION_SW. If the type of face detection requested is not
+     * supported, the HAL must return BAD_VALUE.
+     */
+    CAMERA_CMD_START_FACE_DETECTION = 6,
+
+    /**
+     * Stop the face detection.
+     */
+    CAMERA_CMD_STOP_FACE_DETECTION = 7,
+
+    /**
+     * Enable/disable focus move callback (CAMERA_MSG_FOCUS_MOVE). Passing
+     * arg1 = 0 will disable, while passing arg1 = 1 will enable the callback.
+     */
+    CAMERA_CMD_ENABLE_FOCUS_MOVE_MSG = 8,
+
+    /**
+     * Ping camera service to see if camera hardware is released.
+     *
+     * When any camera method returns error, the client can use ping command
+     * to see if the camera has been taken away by other clients. If the result
+     * is NO_ERROR, it means the camera hardware is not released. If the result
+     * is not NO_ERROR, the camera has been released and the existing client
+     * can silently finish itself or show a dialog.
+     */
+    CAMERA_CMD_PING = 9,
+
+    /**
+     * Configure the number of video buffers used for recording. The intended
+     * video buffer count for recording is passed as arg1, which must be
+     * greater than 0. This command must be sent before recording is started.
+     * This command returns INVALID_OPERATION error if it is sent after video
+     * recording is started, or the command is not supported at all. This
+     * command also returns a BAD_VALUE error if the intended video buffer
+     * count is non-positive or too big to be realized.
+     */
+    CAMERA_CMD_SET_VIDEO_BUFFER_COUNT = 10,
+
+    /**
+     * Configure an explicit format to use for video recording metadata mode.
+     * This can be used to switch the format from the
+     * default IMPLEMENTATION_DEFINED gralloc format to some other
+     * device-supported format, and the default dataspace from the BT_709 color
+     * space to some other device-supported dataspace. arg1 is the HAL pixel
+     * format, and arg2 is the HAL dataSpace. This command returns
+     * INVALID_OPERATION error if it is sent after video recording is started,
+     * or the command is not supported at all.
+     *
+     * If the gralloc format is set to a format other than
+     * IMPLEMENTATION_DEFINED, then HALv3 devices will use gralloc usage flags
+     * of SW_READ_OFTEN.
+     */
+    CAMERA_CMD_SET_VIDEO_FORMAT = 11
+};
+
+/** camera fatal errors */
+enum {
+    CAMERA_ERROR_UNKNOWN = 1,
+    /**
+     * Camera was released because another client has connected to the camera.
+     * The original client should call Camera::disconnect immediately after
+     * getting this notification. Otherwise, the camera will be released by
+     * camera service in a short time. The client should not call any method
+     * (except disconnect and sending CAMERA_CMD_PING) after getting this.
+     */
+    CAMERA_ERROR_RELEASED = 2,
+    CAMERA_ERROR_SERVER_DIED = 100
+};
+
+enum {
+    /** The facing of the camera is opposite to that of the screen. */
+    CAMERA_FACING_BACK = 0,
+    /** The facing of the camera is the same as that of the screen. */
+    CAMERA_FACING_FRONT = 1,
+    /**
+     * The facing of the camera is not fixed relative to the screen.
+     * The cameras with this facing are external cameras, e.g. USB cameras.
+     */
+    CAMERA_FACING_EXTERNAL = 2
+};
+
+enum {
+    /** Hardware face detection. It does not use much CPU. */
+    CAMERA_FACE_DETECTION_HW = 0,
+    /**
+     * Software face detection. It uses some CPU. Applications must use
+     * Camera.setPreviewTexture for preview in this mode.
+     */
+    CAMERA_FACE_DETECTION_SW = 1
+};
+
+/**
+ * The information of a face from camera face detection.
+ */
+typedef struct camera_face {
+    /**
+     * Bounds of the face [left, top, right, bottom]. (-1000, -1000) represents
+     * the top-left of the camera field of view, and (1000, 1000) represents the
+     * bottom-right of the field of view. The width and height cannot be 0 or
+     * negative. This is supported by both hardware and software face detection.
+     *
+     * The direction is relative to the sensor orientation, that is, what the
+     * sensor sees. The direction is not affected by the rotation or mirroring
+     * of CAMERA_CMD_SET_DISPLAY_ORIENTATION.
+     */
+    int32_t rect[4];
+
+    /**
+     * The confidence level of the face. The range is 1 to 100. 100 is the
+     * highest confidence. This is supported by both hardware and software
+     * face detection.
+     */
+    int32_t score;
+
+    /**
+     * An unique id per face while the face is visible to the tracker. If
+     * the face leaves the field-of-view and comes back, it will get a new
+     * id. If the value is 0, id is not supported.
+     */
+    int32_t id;
+
+    /**
+     * The coordinates of the center of the left eye. The range is -1000 to
+     * 1000. -2000, -2000 if this is not supported.
+     */
+    int32_t left_eye[2];
+
+    /**
+     * The coordinates of the center of the right eye. The range is -1000 to
+     * 1000. -2000, -2000 if this is not supported.
+     */
+    int32_t right_eye[2];
+
+    /**
+     * The coordinates of the center of the mouth. The range is -1000 to 1000.
+     * -2000, -2000 if this is not supported.
+     */
+    int32_t mouth[2];
+
+} camera_face_t;
+
+/**
+ * The metadata of the frame data.
+ */
+typedef struct camera_frame_metadata {
+    /**
+     * The number of detected faces in the frame.
+     */
+    int32_t number_of_faces;
+
+    /**
+     * An array of the detected faces. The length is number_of_faces.
+     */
+    camera_face_t *faces;
+} camera_frame_metadata_t;
+
+__END_DECLS
+
+#endif /* SYSTEM_CORE_INCLUDE_ANDROID_CAMERA_H */
diff --git a/libsystem/include/system/graphics-base.h b/libsystem/include/system/graphics-base.h
new file mode 100644
index 0000000..2a44faf
--- /dev/null
+++ b/libsystem/include/system/graphics-base.h
@@ -0,0 +1,141 @@
+// This file is autogenerated by hidl-gen. Do not edit manually.
+// Source: android.hardware.graphics.common@1.0
+// Root: android.hardware:hardware/interfaces
+
+#ifndef HIDL_GENERATED_ANDROID_HARDWARE_GRAPHICS_COMMON_V1_0_EXPORTED_CONSTANTS_H_
+#define HIDL_GENERATED_ANDROID_HARDWARE_GRAPHICS_COMMON_V1_0_EXPORTED_CONSTANTS_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+    HAL_PIXEL_FORMAT_RGBA_8888 = 1,
+    HAL_PIXEL_FORMAT_RGBX_8888 = 2,
+    HAL_PIXEL_FORMAT_RGB_888 = 3,
+    HAL_PIXEL_FORMAT_RGB_565 = 4,
+    HAL_PIXEL_FORMAT_BGRA_8888 = 5,
+    HAL_PIXEL_FORMAT_RGBA_1010102 = 43, // 0x2B
+    HAL_PIXEL_FORMAT_RGBA_FP16 = 22, // 0x16
+    HAL_PIXEL_FORMAT_YV12 = 842094169, // 0x32315659
+    HAL_PIXEL_FORMAT_Y8 = 538982489, // 0x20203859
+    HAL_PIXEL_FORMAT_Y16 = 540422489, // 0x20363159
+    HAL_PIXEL_FORMAT_RAW16 = 32, // 0x20
+    HAL_PIXEL_FORMAT_RAW10 = 37, // 0x25
+    HAL_PIXEL_FORMAT_RAW12 = 38, // 0x26
+    HAL_PIXEL_FORMAT_RAW_OPAQUE = 36, // 0x24
+    HAL_PIXEL_FORMAT_BLOB = 33, // 0x21
+    HAL_PIXEL_FORMAT_IMPLEMENTATION_DEFINED = 34, // 0x22
+    HAL_PIXEL_FORMAT_YCBCR_420_888 = 35, // 0x23
+    HAL_PIXEL_FORMAT_YCBCR_422_888 = 39, // 0x27
+    HAL_PIXEL_FORMAT_YCBCR_444_888 = 40, // 0x28
+    HAL_PIXEL_FORMAT_FLEX_RGB_888 = 41, // 0x29
+    HAL_PIXEL_FORMAT_FLEX_RGBA_8888 = 42, // 0x2A
+    HAL_PIXEL_FORMAT_YCBCR_422_SP = 16, // 0x10
+    HAL_PIXEL_FORMAT_YCRCB_420_SP = 17, // 0x11
+    HAL_PIXEL_FORMAT_YCBCR_422_I = 20, // 0x14
+    HAL_PIXEL_FORMAT_JPEG = 256, // 0x100
+} android_pixel_format_t;
+
+typedef enum {
+    HAL_TRANSFORM_FLIP_H = 1, // 0x01
+    HAL_TRANSFORM_FLIP_V = 2, // 0x02
+    HAL_TRANSFORM_ROT_90 = 4, // 0x04
+    HAL_TRANSFORM_ROT_180 = 3, // 0x03
+    HAL_TRANSFORM_ROT_270 = 7, // 0x07
+} android_transform_t;
+
+typedef enum {
+    HAL_DATASPACE_UNKNOWN = 0, // 0x0
+    HAL_DATASPACE_ARBITRARY = 1, // 0x1
+    HAL_DATASPACE_STANDARD_SHIFT = 16,
+    HAL_DATASPACE_STANDARD_MASK = 4128768, // (63 << STANDARD_SHIFT)
+    HAL_DATASPACE_STANDARD_UNSPECIFIED = 0, // (0 << STANDARD_SHIFT)
+    HAL_DATASPACE_STANDARD_BT709 = 65536, // (1 << STANDARD_SHIFT)
+    HAL_DATASPACE_STANDARD_BT601_625 = 131072, // (2 << STANDARD_SHIFT)
+    HAL_DATASPACE_STANDARD_BT601_625_UNADJUSTED = 196608, // (3 << STANDARD_SHIFT)
+    HAL_DATASPACE_STANDARD_BT601_525 = 262144, // (4 << STANDARD_SHIFT)
+    HAL_DATASPACE_STANDARD_BT601_525_UNADJUSTED = 327680, // (5 << STANDARD_SHIFT)
+    HAL_DATASPACE_STANDARD_BT2020 = 393216, // (6 << STANDARD_SHIFT)
+    HAL_DATASPACE_STANDARD_BT2020_CONSTANT_LUMINANCE = 458752, // (7 << STANDARD_SHIFT)
+    HAL_DATASPACE_STANDARD_BT470M = 524288, // (8 << STANDARD_SHIFT)
+    HAL_DATASPACE_STANDARD_FILM = 589824, // (9 << STANDARD_SHIFT)
+    HAL_DATASPACE_STANDARD_DCI_P3 = 655360, // (10 << STANDARD_SHIFT)
+    HAL_DATASPACE_STANDARD_ADOBE_RGB = 720896, // (11 << STANDARD_SHIFT)
+    HAL_DATASPACE_TRANSFER_SHIFT = 22,
+    HAL_DATASPACE_TRANSFER_MASK = 130023424, // (31 << TRANSFER_SHIFT)
+    HAL_DATASPACE_TRANSFER_UNSPECIFIED = 0, // (0 << TRANSFER_SHIFT)
+    HAL_DATASPACE_TRANSFER_LINEAR = 4194304, // (1 << TRANSFER_SHIFT)
+    HAL_DATASPACE_TRANSFER_SRGB = 8388608, // (2 << TRANSFER_SHIFT)
+    HAL_DATASPACE_TRANSFER_SMPTE_170M = 12582912, // (3 << TRANSFER_SHIFT)
+    HAL_DATASPACE_TRANSFER_GAMMA2_2 = 16777216, // (4 << TRANSFER_SHIFT)
+    HAL_DATASPACE_TRANSFER_GAMMA2_6 = 20971520, // (5 << TRANSFER_SHIFT)
+    HAL_DATASPACE_TRANSFER_GAMMA2_8 = 25165824, // (6 << TRANSFER_SHIFT)
+    HAL_DATASPACE_TRANSFER_ST2084 = 29360128, // (7 << TRANSFER_SHIFT)
+    HAL_DATASPACE_TRANSFER_HLG = 33554432, // (8 << TRANSFER_SHIFT)
+    HAL_DATASPACE_RANGE_SHIFT = 27,
+    HAL_DATASPACE_RANGE_MASK = 939524096, // (7 << RANGE_SHIFT)
+    HAL_DATASPACE_RANGE_UNSPECIFIED = 0, // (0 << RANGE_SHIFT)
+    HAL_DATASPACE_RANGE_FULL = 134217728, // (1 << RANGE_SHIFT)
+    HAL_DATASPACE_RANGE_LIMITED = 268435456, // (2 << RANGE_SHIFT)
+    HAL_DATASPACE_RANGE_EXTENDED = 402653184, // (3 << RANGE_SHIFT)
+    HAL_DATASPACE_SRGB_LINEAR = 512, // 0x200
+    HAL_DATASPACE_V0_SRGB_LINEAR = 138477568, // ((STANDARD_BT709 | TRANSFER_LINEAR) | RANGE_FULL)
+    HAL_DATASPACE_V0_SCRGB_LINEAR = 406913024, // ((STANDARD_BT709 | TRANSFER_LINEAR) | RANGE_EXTENDED)
+    HAL_DATASPACE_SRGB = 513, // 0x201
+    HAL_DATASPACE_V0_SRGB = 142671872, // ((STANDARD_BT709 | TRANSFER_SRGB) | RANGE_FULL)
+    HAL_DATASPACE_V0_SCRGB = 411107328, // ((STANDARD_BT709 | TRANSFER_SRGB) | RANGE_EXTENDED)
+    HAL_DATASPACE_JFIF = 257, // 0x101
+    HAL_DATASPACE_V0_JFIF = 146931712, // ((STANDARD_BT601_625 | TRANSFER_SMPTE_170M) | RANGE_FULL)
+    HAL_DATASPACE_BT601_625 = 258, // 0x102
+    HAL_DATASPACE_V0_BT601_625 = 281149440, // ((STANDARD_BT601_625 | TRANSFER_SMPTE_170M) | RANGE_LIMITED)
+    HAL_DATASPACE_BT601_525 = 259, // 0x103
+    HAL_DATASPACE_V0_BT601_525 = 281280512, // ((STANDARD_BT601_525 | TRANSFER_SMPTE_170M) | RANGE_LIMITED)
+    HAL_DATASPACE_BT709 = 260, // 0x104
+    HAL_DATASPACE_V0_BT709 = 281083904, // ((STANDARD_BT709 | TRANSFER_SMPTE_170M) | RANGE_LIMITED)
+    HAL_DATASPACE_DCI_P3_LINEAR = 139067392, // ((STANDARD_DCI_P3 | TRANSFER_LINEAR) | RANGE_FULL)
+    HAL_DATASPACE_DCI_P3 = 155844608, // ((STANDARD_DCI_P3 | TRANSFER_GAMMA2_6) | RANGE_FULL)
+    HAL_DATASPACE_DISPLAY_P3_LINEAR = 139067392, // ((STANDARD_DCI_P3 | TRANSFER_LINEAR) | RANGE_FULL)
+    HAL_DATASPACE_DISPLAY_P3 = 143261696, // ((STANDARD_DCI_P3 | TRANSFER_SRGB) | RANGE_FULL)
+    HAL_DATASPACE_ADOBE_RGB = 151715840, // ((STANDARD_ADOBE_RGB | TRANSFER_GAMMA2_2) | RANGE_FULL)
+    HAL_DATASPACE_BT2020_LINEAR = 138805248, // ((STANDARD_BT2020 | TRANSFER_LINEAR) | RANGE_FULL)
+    HAL_DATASPACE_BT2020 = 147193856, // ((STANDARD_BT2020 | TRANSFER_SMPTE_170M) | RANGE_FULL)
+    HAL_DATASPACE_BT2020_PQ = 163971072, // ((STANDARD_BT2020 | TRANSFER_ST2084) | RANGE_FULL)
+    HAL_DATASPACE_DEPTH = 4096, // 0x1000
+    HAL_DATASPACE_SENSOR = 4097, // 0x1001
+} android_dataspace_t;
+
+typedef enum {
+    HAL_COLOR_MODE_NATIVE = 0,
+    HAL_COLOR_MODE_STANDARD_BT601_625 = 1,
+    HAL_COLOR_MODE_STANDARD_BT601_625_UNADJUSTED = 2,
+    HAL_COLOR_MODE_STANDARD_BT601_525 = 3,
+    HAL_COLOR_MODE_STANDARD_BT601_525_UNADJUSTED = 4,
+    HAL_COLOR_MODE_STANDARD_BT709 = 5,
+    HAL_COLOR_MODE_DCI_P3 = 6,
+    HAL_COLOR_MODE_SRGB = 7,
+    HAL_COLOR_MODE_ADOBE_RGB = 8,
+    HAL_COLOR_MODE_DISPLAY_P3 = 9,
+} android_color_mode_t;
+
+typedef enum {
+    HAL_COLOR_TRANSFORM_IDENTITY = 0,
+    HAL_COLOR_TRANSFORM_ARBITRARY_MATRIX = 1,
+    HAL_COLOR_TRANSFORM_VALUE_INVERSE = 2,
+    HAL_COLOR_TRANSFORM_GRAYSCALE = 3,
+    HAL_COLOR_TRANSFORM_CORRECT_PROTANOPIA = 4,
+    HAL_COLOR_TRANSFORM_CORRECT_DEUTERANOPIA = 5,
+    HAL_COLOR_TRANSFORM_CORRECT_TRITANOPIA = 6,
+} android_color_transform_t;
+
+typedef enum {
+    HAL_HDR_DOLBY_VISION = 1,
+    HAL_HDR_HDR10 = 2,
+    HAL_HDR_HLG = 3,
+} android_hdr_t;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif  // HIDL_GENERATED_ANDROID_HARDWARE_GRAPHICS_COMMON_V1_0_EXPORTED_CONSTANTS_H_
diff --git a/libsystem/include/system/graphics.h b/libsystem/include/system/graphics.h
new file mode 100644
index 0000000..1a99187
--- /dev/null
+++ b/libsystem/include/system/graphics.h
@@ -0,0 +1,264 @@
+/*
+ * Copyright (C) 2011 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef SYSTEM_CORE_INCLUDE_ANDROID_GRAPHICS_H
+#define SYSTEM_CORE_INCLUDE_ANDROID_GRAPHICS_H
+
+#include <stddef.h>
+#include <stdint.h>
+
+/*
+ * Some of the enums are now defined in HIDL in hardware/interfaces and are
+ * generated.
+ */
+#include "graphics-base.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* for compatibility */
+#define HAL_PIXEL_FORMAT_YCbCr_420_888 HAL_PIXEL_FORMAT_YCBCR_420_888
+#define HAL_PIXEL_FORMAT_YCbCr_422_888 HAL_PIXEL_FORMAT_YCBCR_422_888
+#define HAL_PIXEL_FORMAT_YCbCr_444_888 HAL_PIXEL_FORMAT_YCBCR_444_888
+#define HAL_PIXEL_FORMAT_YCbCr_422_SP HAL_PIXEL_FORMAT_YCBCR_422_SP
+#define HAL_PIXEL_FORMAT_YCrCb_420_SP HAL_PIXEL_FORMAT_YCRCB_420_SP
+#define HAL_PIXEL_FORMAT_YCbCr_422_I HAL_PIXEL_FORMAT_YCBCR_422_I
+typedef android_pixel_format_t android_pixel_format;
+typedef android_transform_t android_transform;
+typedef android_dataspace_t android_dataspace;
+typedef android_color_mode_t android_color_mode;
+typedef android_color_transform_t android_color_transform;
+typedef android_hdr_t android_hdr;
+
+/*
+ * If the HAL needs to create service threads to handle graphics related
+ * tasks, these threads need to run at HAL_PRIORITY_URGENT_DISPLAY priority
+ * if they can block the main rendering thread in any way.
+ *
+ * the priority of the current thread can be set with:
+ *
+ *      #include <sys/resource.h>
+ *      setpriority(PRIO_PROCESS, 0, HAL_PRIORITY_URGENT_DISPLAY);
+ *
+ */
+
+#define HAL_PRIORITY_URGENT_DISPLAY     (-8)
+
+/*
+ * Structure for describing YCbCr formats for consumption by applications.
+ * This is used with HAL_PIXEL_FORMAT_YCbCr_*_888.
+ *
+ * Buffer chroma subsampling is defined in the format.
+ * e.g. HAL_PIXEL_FORMAT_YCbCr_420_888 has subsampling 4:2:0.
+ *
+ * Buffers must have a 8 bit depth.
+ *
+ * y, cb, and cr point to the first byte of their respective planes.
+ *
+ * Stride describes the distance in bytes from the first value of one row of
+ * the image to the first value of the next row.  It includes the width of the
+ * image plus padding.
+ * ystride is the stride of the luma plane.
+ * cstride is the stride of the chroma planes.
+ *
+ * chroma_step is the distance in bytes from one chroma pixel value to the
+ * next.  This is 2 bytes for semiplanar (because chroma values are interleaved
+ * and each chroma value is one byte) and 1 for planar.
+ */
+
+struct android_ycbcr {
+    void *y;
+    void *cb;
+    void *cr;
+    size_t ystride;
+    size_t cstride;
+    size_t chroma_step;
+
+    /** reserved for future use, set to 0 by gralloc's (*lock_ycbcr)() */
+    uint32_t reserved[8];
+};
+
+/*
+ * Structures for describing flexible YUVA/RGBA formats for consumption by
+ * applications. Such flexible formats contain a plane for each component (e.g.
+ * red, green, blue), where each plane is laid out in a grid-like pattern
+ * occupying unique byte addresses and with consistent byte offsets between
+ * neighboring pixels.
+ *
+ * The android_flex_layout structure is used with any pixel format that can be
+ * represented by it, such as:
+ *  - HAL_PIXEL_FORMAT_YCbCr_*_888
+ *  - HAL_PIXEL_FORMAT_FLEX_RGB*_888
+ *  - HAL_PIXEL_FORMAT_RGB[AX]_888[8],BGRA_8888,RGB_888
+ *  - HAL_PIXEL_FORMAT_YV12,Y8,Y16,YCbCr_422_SP/I,YCrCb_420_SP
+ *  - even implementation defined formats that can be represented by
+ *    the structures
+ *
+ * Vertical increment (aka. row increment or stride) describes the distance in
+ * bytes from the first pixel of one row to the first pixel of the next row
+ * (below) for the component plane. This can be negative.
+ *
+ * Horizontal increment (aka. column or pixel increment) describes the distance
+ * in bytes from one pixel to the next pixel (to the right) on the same row for
+ * the component plane. This can be negative.
+ *
+ * Each plane can be subsampled either vertically or horizontally by
+ * a power-of-two factor.
+ *
+ * The bit-depth of each component can be arbitrary, as long as the pixels are
+ * laid out on whole bytes, in native byte-order, using the most significant
+ * bits of each unit.
+ */
+
+typedef enum android_flex_component {
+    /* luma */
+    FLEX_COMPONENT_Y = 1 << 0,
+    /* chroma blue */
+    FLEX_COMPONENT_Cb = 1 << 1,
+    /* chroma red */
+    FLEX_COMPONENT_Cr = 1 << 2,
+
+    /* red */
+    FLEX_COMPONENT_R = 1 << 10,
+    /* green */
+    FLEX_COMPONENT_G = 1 << 11,
+    /* blue */
+    FLEX_COMPONENT_B = 1 << 12,
+
+    /* alpha */
+    FLEX_COMPONENT_A = 1 << 30,
+} android_flex_component_t;
+
+typedef struct android_flex_plane {
+    /* pointer to the first byte of the top-left pixel of the plane. */
+    uint8_t *top_left;
+
+    android_flex_component_t component;
+
+    /* bits allocated for the component in each pixel. Must be a positive
+       multiple of 8. */
+    int32_t bits_per_component;
+    /* number of the most significant bits used in the format for this
+       component. Must be between 1 and bits_per_component, inclusive. */
+    int32_t bits_used;
+
+    /* horizontal increment */
+    int32_t h_increment;
+    /* vertical increment */
+    int32_t v_increment;
+    /* horizontal subsampling. Must be a positive power of 2. */
+    int32_t h_subsampling;
+    /* vertical subsampling. Must be a positive power of 2. */
+    int32_t v_subsampling;
+} android_flex_plane_t;
+
+typedef enum android_flex_format {
+    /* not a flexible format */
+    FLEX_FORMAT_INVALID = 0x0,
+    FLEX_FORMAT_Y = FLEX_COMPONENT_Y,
+    FLEX_FORMAT_YCbCr = FLEX_COMPONENT_Y | FLEX_COMPONENT_Cb | FLEX_COMPONENT_Cr,
+    FLEX_FORMAT_YCbCrA = FLEX_FORMAT_YCbCr | FLEX_COMPONENT_A,
+    FLEX_FORMAT_RGB = FLEX_COMPONENT_R | FLEX_COMPONENT_G | FLEX_COMPONENT_B,
+    FLEX_FORMAT_RGBA = FLEX_FORMAT_RGB | FLEX_COMPONENT_A,
+} android_flex_format_t;
+
+typedef struct android_flex_layout {
+    /* the kind of flexible format */
+    android_flex_format_t format;
+
+    /* number of planes; 0 for FLEX_FORMAT_INVALID */
+    uint32_t num_planes;
+    /* a plane for each component; ordered in increasing component value order.
+       E.g. FLEX_FORMAT_RGBA maps 0 -> R, 1 -> G, etc.
+       Can be NULL for FLEX_FORMAT_INVALID */
+    android_flex_plane_t *planes;
+} android_flex_layout_t;
+
+/**
+ * Structure used to define depth point clouds for format HAL_PIXEL_FORMAT_BLOB
+ * with dataSpace value of HAL_DATASPACE_DEPTH.
+ * When locking a native buffer of the above format and dataSpace value,
+ * the vaddr pointer can be cast to this structure.
+ *
+ * A variable-length list of (x,y,z, confidence) 3D points, as floats.  (x, y,
+ * z) represents a measured point's position, with the coordinate system defined
+ * by the data source.  Confidence represents the estimated likelihood that this
+ * measurement is correct. It is between 0.f and 1.f, inclusive, with 1.f ==
+ * 100% confidence.
+ *
+ * num_points is the number of points in the list
+ *
+ * xyz_points is the flexible array of floating-point values.
+ *   It contains (num_points) * 4 floats.
+ *
+ *   For example:
+ *     android_depth_points d = get_depth_buffer();
+ *     struct {
+ *       float x; float y; float z; float confidence;
+ *     } firstPoint, lastPoint;
+ *
+ *     firstPoint.x = d.xyzc_points[0];
+ *     firstPoint.y = d.xyzc_points[1];
+ *     firstPoint.z = d.xyzc_points[2];
+ *     firstPoint.confidence = d.xyzc_points[3];
+ *     lastPoint.x = d.xyzc_points[(d.num_points - 1) * 4 + 0];
+ *     lastPoint.y = d.xyzc_points[(d.num_points - 1) * 4 + 1];
+ *     lastPoint.z = d.xyzc_points[(d.num_points - 1) * 4 + 2];
+ *     lastPoint.confidence = d.xyzc_points[(d.num_points - 1) * 4 + 3];
+ */
+
+struct android_depth_points {
+    uint32_t num_points;
+
+    /** reserved for future use, set to 0 by gralloc's (*lock)() */
+    uint32_t reserved[8];
+
+#if defined(__clang__)
+#pragma clang diagnostic push
+#pragma clang diagnostic ignored "-Wc99-extensions"
+#endif
+    float xyzc_points[];
+#if defined(__clang__)
+#pragma clang diagnostic pop
+#endif
+};
+
+/**
+  * These structures are used to define the reference display's
+  * capabilities for HDR content. Display engine can use this
+  * to better tone map content to user's display.
+  * Color is defined in CIE XYZ coordinates
+  */
+struct android_xy_color {
+    float x;
+    float y;
+};
+
+struct android_smpte2086_metadata {
+    struct android_xy_color displayPrimaryRed;
+    struct android_xy_color displayPrimaryGreen;
+    struct android_xy_color displayPrimaryBlue;
+    struct android_xy_color whitePoint;
+    float maxLuminance;
+    float minLuminance;
+};
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* SYSTEM_CORE_INCLUDE_ANDROID_GRAPHICS_H */
diff --git a/libsystem/include/system/qemu_pipe.h b/libsystem/include/system/qemu_pipe.h
new file mode 100644
index 0000000..af25079
--- /dev/null
+++ b/libsystem/include/system/qemu_pipe.h
@@ -0,0 +1,134 @@
+/*
+ * Copyright (C) 2011 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef ANDROID_INCLUDE_SYSTEM_QEMU_PIPE_H
+#define ANDROID_INCLUDE_SYSTEM_QEMU_PIPE_H
+
+#include <unistd.h>
+#include <fcntl.h>
+#include <string.h>
+#include <errno.h>
+
+// Define QEMU_PIPE_DEBUG if you want to print error messages when an error
+// occurs during pipe operations. The macro should simply take a printf-style
+// formatting string followed by optional arguments.
+#ifndef QEMU_PIPE_DEBUG
+#  define  QEMU_PIPE_DEBUG(...)   (void)0
+#endif
+
+// Try to open a new Qemu fast-pipe. This function returns a file descriptor
+// that can be used to communicate with a named service managed by the
+// emulator.
+//
+// This file descriptor can be used as a standard pipe/socket descriptor.
+//
+// 'pipeName' is the name of the emulator service you want to connect to,
+// and must begin with 'pipe:' (e.g. 'pipe:camera' or 'pipe:opengles').
+//
+// On success, return a valid file descriptor, or -1/errno on failure. E.g.:
+//
+// EINVAL  -> unknown/unsupported pipeName
+// ENOSYS  -> fast pipes not available in this system.
+//
+// ENOSYS should never happen, except if you're trying to run within a
+// misconfigured emulator.
+//
+// You should be able to open several pipes to the same pipe service,
+// except for a few special cases (e.g. GSM modem), where EBUSY will be
+// returned if more than one client tries to connect to it.
+static __inline__ int qemu_pipe_open(const char* pipeName) {
+    // Sanity check.
+    if (!pipeName || memcmp(pipeName, "pipe:", 5) != 0) {
+        errno = EINVAL;
+        return -1;
+    }
+
+    int fd = TEMP_FAILURE_RETRY(open("/dev/qemu_pipe", O_RDWR));
+    if (fd < 0) {
+        QEMU_PIPE_DEBUG("%s: Could not open /dev/qemu_pipe: %s", __FUNCTION__,
+                        strerror(errno));
+        return -1;
+    }
+
+    // Write the pipe name, *including* the trailing zero which is necessary.
+    size_t pipeNameLen = strlen(pipeName);
+    ssize_t ret = TEMP_FAILURE_RETRY(write(fd, pipeName, pipeNameLen + 1U));
+    if (ret != (ssize_t)pipeNameLen + 1) {
+        QEMU_PIPE_DEBUG("%s: Could not connect to %s pipe service: %s",
+                        __FUNCTION__, pipeName, strerror(errno));
+        if (ret == 0) {
+            errno = ECONNRESET;
+        } else if (ret > 0) {
+            errno = EINVAL;
+        }
+        return -1;
+    }
+    return fd;
+}
+
+// Send a framed message |buff| of |len| bytes through the |fd| descriptor.
+// This really adds a 4-hexchar prefix describing the payload size.
+// Returns 0 on success, and -1 on error.
+static int __inline__ qemu_pipe_frame_send(int fd,
+                                           const void* buff,
+                                           size_t len) {
+    char header[5];
+    snprintf(header, sizeof(header), "%04zx", len);
+    ssize_t ret = TEMP_FAILURE_RETRY(write(fd, header, 4));
+    if (ret != 4) {
+        QEMU_PIPE_DEBUG("Can't write qemud frame header: %s", strerror(errno));
+        return -1;
+    }
+    ret = TEMP_FAILURE_RETRY(write(fd, buff, len));
+    if (ret != (ssize_t)len) {
+        QEMU_PIPE_DEBUG("Can't write qemud frame payload: %s", strerror(errno));
+        return -1;
+    }
+    return 0;
+}
+
+// Read a frame message from |fd|, and store it into |buff| of |len| bytes.
+// If the framed message is larger than |len|, then this returns -1 and the
+// content is lost. Otherwise, this returns the size of the message. NOTE:
+// empty messages are possible in a framed wire protocol and do not mean
+// end-of-stream.
+static int __inline__ qemu_pipe_frame_recv(int fd, void* buff, size_t len) {
+    char header[5];
+    ssize_t ret = TEMP_FAILURE_RETRY(read(fd, header, 4));
+    if (ret != 4) {
+        QEMU_PIPE_DEBUG("Can't read qemud frame header: %s", strerror(errno));
+        return -1;
+    }
+    header[4] = '\0';
+    size_t size;
+    if (sscanf(header, "%04zx", &size) != 1) {
+        QEMU_PIPE_DEBUG("Malformed qemud frame header: [%.*s]", 4, header);
+        return -1;
+    }
+    if (size > len) {
+        QEMU_PIPE_DEBUG("Oversized qemud frame (% bytes, expected <= %)", size,
+                        len);
+        return -1;
+    }
+    ret = TEMP_FAILURE_RETRY(read(fd, buff, size));
+    if (ret != (ssize_t)size) {
+        QEMU_PIPE_DEBUG("Could not read qemud frame payload: %s",
+                        strerror(errno));
+        return -1;
+    }
+    return size;
+}
+
+#endif /* ANDROID_INCLUDE_HARDWARE_QEMUD_PIPE_H */
diff --git a/libsystem/include/system/radio.h b/libsystem/include/system/radio.h
new file mode 100644
index 0000000..acf3ea7
--- /dev/null
+++ b/libsystem/include/system/radio.h
@@ -0,0 +1,254 @@
+/*
+ * Copyright (C) 2015 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef ANDROID_RADIO_H
+#define ANDROID_RADIO_H
+
+#include <stdbool.h>
+#include <stdint.h>
+#include <stdio.h>
+#include <sys/cdefs.h>
+#include <sys/types.h>
+
+
+#define RADIO_NUM_BANDS_MAX     16
+#define RADIO_NUM_SPACINGS_MAX  16
+#define RADIO_STRING_LEN_MAX    128
+
+/*
+ * Radio hardware module class. A given radio hardware module HAL is of one class
+ * only. The platform can not have more than one hardware module of each class.
+ * Current version of the framework only supports RADIO_CLASS_AM_FM.
+ */
+typedef enum {
+    RADIO_CLASS_AM_FM = 0,  /* FM (including HD radio) and AM */
+    RADIO_CLASS_SAT   = 1,  /* Satellite Radio */
+    RADIO_CLASS_DT    = 2,  /* Digital Radio (DAB) */
+} radio_class_t;
+
+/* value for field "type" of radio band described in struct radio_hal_band_config */
+typedef enum {
+    RADIO_BAND_AM     = 0,  /* Amplitude Modulation band: LW, MW, SW */
+    RADIO_BAND_FM     = 1,  /* Frequency Modulation band: FM */
+    RADIO_BAND_FM_HD  = 2,  /* FM HD Radio / DRM (IBOC) */
+    RADIO_BAND_AM_HD  = 3,  /* AM HD Radio / DRM (IBOC) */
+} radio_band_t;
+
+/* RDS variant implemented. A struct radio_hal_fm_band_config can list none or several. */
+enum {
+    RADIO_RDS_NONE   = 0x0,
+    RADIO_RDS_WORLD  = 0x01,
+    RADIO_RDS_US     = 0x02,
+};
+typedef unsigned int radio_rds_t;
+
+/* FM deemphasis variant implemented. A struct radio_hal_fm_band_config can list one or more. */
+enum {
+    RADIO_DEEMPHASIS_50   = 0x1,
+    RADIO_DEEMPHASIS_75   = 0x2,
+};
+typedef unsigned int radio_deemphasis_t;
+
+/* Region a particular radio band configuration corresponds to. Not used at the HAL.
+ * Derived by the framework when converting the band descriptors retrieved from the HAL to
+ * individual band descriptors for each supported region. */
+typedef enum {
+    RADIO_REGION_NONE  = -1,
+    RADIO_REGION_ITU_1 = 0,
+    RADIO_REGION_ITU_2 = 1,
+    RADIO_REGION_OIRT  = 2,
+    RADIO_REGION_JAPAN = 3,
+    RADIO_REGION_KOREA = 4,
+} radio_region_t;
+
+/* scanning direction for scan() and step() tuner APIs */
+typedef enum {
+    RADIO_DIRECTION_UP,
+    RADIO_DIRECTION_DOWN
+} radio_direction_t;
+
+/* unique handle allocated to a radio module */
+typedef uint32_t radio_handle_t;
+
+/* Opaque meta data structure used by radio meta data API (see system/radio_metadata.h) */
+typedef struct radio_metadata radio_metadata_t;
+
+
+/* Additional attributes for an FM band configuration */
+typedef struct radio_hal_fm_band_config {
+    radio_deemphasis_t  deemphasis; /* deemphasis variant */
+    bool                stereo;     /* stereo supported */
+    radio_rds_t         rds;        /* RDS variants supported */
+    bool                ta;         /* Traffic Announcement supported */
+    bool                af;         /* Alternate Frequency supported */
+    bool                ea;         /* Emergency announcements supported */
+} radio_hal_fm_band_config_t;
+
+/* Additional attributes for an AM band configuration */
+typedef struct radio_hal_am_band_config {
+    bool                stereo;     /* stereo supported */
+} radio_hal_am_band_config_t;
+
+/* Radio band configuration. Describes a given band supported by the radio module.
+ * The HAL can expose only one band per type with the the maximum range supported and all options.
+ * THe framework will derive the actual regions were this module can operate and expose separate
+ * band configurations for applications to chose from. */
+typedef struct radio_hal_band_config {
+    radio_band_t type;
+    bool         antenna_connected;
+    uint32_t     lower_limit;
+    uint32_t     upper_limit;
+    uint32_t     num_spacings;
+    uint32_t     spacings[RADIO_NUM_SPACINGS_MAX];
+    union {
+        radio_hal_fm_band_config_t fm;
+        radio_hal_am_band_config_t am;
+    };
+} radio_hal_band_config_t;
+
+/* Used internally by the framework to represent a band for s specific region */
+typedef struct radio_band_config {
+    radio_region_t  region;
+    radio_hal_band_config_t band;
+} radio_band_config_t;
+
+
+/* Exposes properties of a given hardware radio module.
+ * NOTE: current framework implementation supports only one audio source (num_audio_sources = 1).
+ * The source corresponds to AUDIO_DEVICE_IN_FM_TUNER.
+ * If more than one tuner is supported (num_tuners > 1), only one can be connected to the audio
+ * source. */
+typedef struct radio_hal_properties {
+    radio_class_t   class_id;   /* Class of this module. E.g RADIO_CLASS_AM_FM */
+    char            implementor[RADIO_STRING_LEN_MAX];  /* implementor name */
+    char            product[RADIO_STRING_LEN_MAX];  /* product name */
+    char            version[RADIO_STRING_LEN_MAX];  /* product version */
+    char            serial[RADIO_STRING_LEN_MAX];  /* serial number (for subscription services) */
+    uint32_t        num_tuners;     /* number of tuners controllable independently */
+    uint32_t        num_audio_sources; /* number of audio sources driven simultaneously */
+    bool            supports_capture; /* the hardware supports capture of audio source audio HAL */
+    uint32_t        num_bands;      /* number of band descriptors */
+    radio_hal_band_config_t bands[RADIO_NUM_BANDS_MAX]; /* band descriptors */
+} radio_hal_properties_t;
+
+/* Used internally by the framework. Same information as in struct radio_hal_properties plus a
+ * unique handle and one band configuration per region. */
+typedef struct radio_properties {
+    radio_handle_t      handle;
+    radio_class_t       class_id;
+    char                implementor[RADIO_STRING_LEN_MAX];
+    char                product[RADIO_STRING_LEN_MAX];
+    char                version[RADIO_STRING_LEN_MAX];
+    char                serial[RADIO_STRING_LEN_MAX];
+    uint32_t            num_tuners;
+    uint32_t            num_audio_sources;
+    bool                supports_capture;
+    uint32_t            num_bands;
+    radio_band_config_t bands[RADIO_NUM_BANDS_MAX];
+} radio_properties_t;
+
+/* Radio program information. Returned by the HAL with event RADIO_EVENT_TUNED.
+ * Contains information on currently tuned channel.
+ */
+typedef struct radio_program_info {
+    uint32_t         channel;   /* current channel. (e.g kHz for band type RADIO_BAND_FM) */
+    uint32_t         sub_channel; /* current sub channel. (used for RADIO_BAND_FM_HD) */
+    bool             tuned;     /* tuned to a program or not */
+    bool             stereo;    /* program is stereo or not */
+    bool             digital;   /* digital program or not (e.g HD Radio program) */
+    uint32_t         signal_strength; /* signal strength from 0 to 100 */
+                                /* meta data (e.g PTY, song title ...), must not be NULL */
+    __attribute__((aligned(8))) radio_metadata_t *metadata;
+} radio_program_info_t;
+
+
+/* Events sent to the framework via the HAL callback. An event can notify the completion of an
+ * asynchronous command (configuration, tune, scan ...) or a spontaneous change (antenna connection,
+ * failure, AF switching, meta data reception... */
+enum {
+    RADIO_EVENT_HW_FAILURE  = 0,  /* hardware module failure. Requires reopening the tuner */
+    RADIO_EVENT_CONFIG      = 1,  /* configuration change completed */
+    RADIO_EVENT_ANTENNA     = 2,  /* Antenna connected, disconnected */
+    RADIO_EVENT_TUNED       = 3,  /* tune, step, scan completed */
+    RADIO_EVENT_METADATA    = 4,  /* New meta data received */
+    RADIO_EVENT_TA          = 5,  /* Traffic announcement start or stop */
+    RADIO_EVENT_AF_SWITCH   = 6,  /* Switch to Alternate Frequency */
+    RADIO_EVENT_EA          = 7,  /* Emergency announcement start or stop */
+    // begin framework only events
+    RADIO_EVENT_CONTROL     = 100, /* loss/gain of tuner control */
+    RADIO_EVENT_SERVER_DIED = 101, /* radio service died */
+};
+typedef unsigned int radio_event_type_t;
+
+/* Event passed to the framework by the HAL callback */
+typedef struct radio_hal_event {
+    radio_event_type_t  type;       /* event type */
+    int32_t             status;     /* used by RADIO_EVENT_CONFIG, RADIO_EVENT_TUNED */
+    union {
+        /* RADIO_EVENT_ANTENNA, RADIO_EVENT_TA, RADIO_EVENT_EA */
+        bool                    on;
+        radio_hal_band_config_t config; /* RADIO_EVENT_CONFIG */
+        radio_program_info_t    info;   /* RADIO_EVENT_TUNED, RADIO_EVENT_AF_SWITCH */
+        radio_metadata_t        *metadata; /* RADIO_EVENT_METADATA */
+    };
+} radio_hal_event_t;
+
+/* Used internally by the framework. Same information as in struct radio_hal_event */
+typedef struct radio_event {
+    radio_event_type_t  type;
+    int32_t             status;
+    union {
+        bool                    on;
+        radio_band_config_t     config;
+        radio_program_info_t    info;
+                                /* meta data (e.g PTY, song title ...), must not be NULL */
+        __attribute__((aligned(8))) radio_metadata_t *metadata;
+    };
+} radio_event_t;
+
+
+static inline
+radio_rds_t radio_rds_for_region(bool rds, radio_region_t region) {
+    if (!rds)
+        return RADIO_RDS_NONE;
+    switch(region) {
+        case RADIO_REGION_ITU_1:
+        case RADIO_REGION_OIRT:
+        case RADIO_REGION_JAPAN:
+        case RADIO_REGION_KOREA:
+            return RADIO_RDS_WORLD;
+        case RADIO_REGION_ITU_2:
+            return RADIO_RDS_US;
+        default:
+            return RADIO_REGION_NONE;
+    }
+}
+
+static inline
+radio_deemphasis_t radio_demephasis_for_region(radio_region_t region) {
+    switch(region) {
+        case RADIO_REGION_KOREA:
+        case RADIO_REGION_ITU_2:
+            return RADIO_DEEMPHASIS_75;
+        case RADIO_REGION_ITU_1:
+        case RADIO_REGION_OIRT:
+        case RADIO_REGION_JAPAN:
+        default:
+            return RADIO_DEEMPHASIS_50;
+    }
+}
+
+#endif  // ANDROID_RADIO_H
diff --git a/libsystem/include/system/thread_defs.h b/libsystem/include/system/thread_defs.h
new file mode 100644
index 0000000..377a48c
--- /dev/null
+++ b/libsystem/include/system/thread_defs.h
@@ -0,0 +1,77 @@
+/*
+ * Copyright (C) 2013 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef ANDROID_THREAD_DEFS_H
+#define ANDROID_THREAD_DEFS_H
+
+#include "graphics.h"
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+enum {
+    /*
+     * ***********************************************
+     * ** Keep in sync with android.os.Process.java **
+     * ***********************************************
+     *
+     * This maps directly to the "nice" priorities we use in Android.
+     * A thread priority should be chosen inverse-proportionally to
+     * the amount of work the thread is expected to do. The more work
+     * a thread will do, the less favorable priority it should get so that
+     * it doesn't starve the system. Threads not behaving properly might
+     * be "punished" by the kernel.
+     * Use the levels below when appropriate. Intermediate values are
+     * acceptable, preferably use the {MORE|LESS}_FAVORABLE constants below.
+     */
+    ANDROID_PRIORITY_LOWEST         =  19,
+
+    /* use for background tasks */
+    ANDROID_PRIORITY_BACKGROUND     =  10,
+
+    /* most threads run at normal priority */
+    ANDROID_PRIORITY_NORMAL         =   0,
+
+    /* threads currently running a UI that the user is interacting with */
+    ANDROID_PRIORITY_FOREGROUND     =  -2,
+
+    /* the main UI thread has a slightly more favorable priority */
+    ANDROID_PRIORITY_DISPLAY        =  -4,
+
+    /* ui service treads might want to run at a urgent display (uncommon) */
+    ANDROID_PRIORITY_URGENT_DISPLAY =  HAL_PRIORITY_URGENT_DISPLAY,
+
+    /* all normal audio threads */
+    ANDROID_PRIORITY_AUDIO          = -16,
+
+    /* service audio threads (uncommon) */
+    ANDROID_PRIORITY_URGENT_AUDIO   = -19,
+
+    /* should never be used in practice. regular process might not
+     * be allowed to use this level */
+    ANDROID_PRIORITY_HIGHEST        = -20,
+
+    ANDROID_PRIORITY_DEFAULT        = ANDROID_PRIORITY_NORMAL,
+    ANDROID_PRIORITY_MORE_FAVORABLE = -1,
+    ANDROID_PRIORITY_LESS_FAVORABLE = +1,
+};
+
+#if defined(__cplusplus)
+}
+#endif
+
+#endif /* ANDROID_THREAD_DEFS_H */
diff --git a/libsystem/include/system/window-deprecated.h b/libsystem/include/system/window-deprecated.h
new file mode 100644
index 0000000..d1ef1e7
--- /dev/null
+++ b/libsystem/include/system/window-deprecated.h
@@ -0,0 +1,1092 @@
+/*
+ * Copyright (C) 2011 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/**************************************************************************************************
+ **************************************************************************************************
+ ****                                                                                          ****
+ ****  DEPRECATED                                                                              ****
+ ****                                                                                          ****
+ ****  THIS FILE EXISTS ONLY FOR BACKWARD SOURCE COMPATIBILITY.                                ****
+ ****                                                                                          ****
+ ****  DO NOT ADD TO THIS FILE.                                                                ****
+ ****                                                                                          ****
+ ****  Driver implementors (vendors) should use vndk/window.h                                  ****
+ ****  (frameworks/native/libs/nativewindow/include/vndk/window.h)                             ****
+ ****                                                                                          ****
+ ****  Internal definition can be found here:                                                  ****
+ ****  frameworks/native/libs/nativewindow/include/system/window.h                             ****
+ ****                                                                                          ****
+ **************************************************************************************************
+ **************************************************************************************************/
+
+#include <cutils/native_handle.h>
+#include <errno.h>
+#include <limits.h>
+#include <stdint.h>
+#include <string.h>
+#include <sys/cdefs.h>
+#include <system/graphics.h>
+#include <unistd.h>
+#include <stdbool.h>
+
+#ifndef __UNUSED
+#define __UNUSED __attribute__((__unused__))
+#endif
+#ifndef __deprecated
+#define __deprecated __attribute__((__deprecated__))
+#endif
+
+__BEGIN_DECLS
+
+/*****************************************************************************/
+
+#ifdef __cplusplus
+#define ANDROID_NATIVE_UNSIGNED_CAST(x) static_cast<unsigned int>(x)
+#else
+#define ANDROID_NATIVE_UNSIGNED_CAST(x) ((unsigned int)(x))
+#endif
+
+#define ANDROID_NATIVE_MAKE_CONSTANT(a,b,c,d) \
+    ((ANDROID_NATIVE_UNSIGNED_CAST(a) << 24) | \
+     (ANDROID_NATIVE_UNSIGNED_CAST(b) << 16) | \
+     (ANDROID_NATIVE_UNSIGNED_CAST(c) << 8) | \
+     (ANDROID_NATIVE_UNSIGNED_CAST(d)))
+
+#define ANDROID_NATIVE_WINDOW_MAGIC \
+    ANDROID_NATIVE_MAKE_CONSTANT('_','w','n','d')
+
+#define ANDROID_NATIVE_BUFFER_MAGIC \
+    ANDROID_NATIVE_MAKE_CONSTANT('_','b','f','r')
+
+// ---------------------------------------------------------------------------
+
+// This #define may be used to conditionally compile device-specific code to
+// support either the prior ANativeWindow interface, which did not pass libsync
+// fences around, or the new interface that does.  This #define is only present
+// when the ANativeWindow interface does include libsync support.
+#define ANDROID_NATIVE_WINDOW_HAS_SYNC 1
+
+// ---------------------------------------------------------------------------
+
+typedef const native_handle_t* buffer_handle_t;
+
+// ---------------------------------------------------------------------------
+
+typedef struct android_native_rect_t
+{
+    int32_t left;
+    int32_t top;
+    int32_t right;
+    int32_t bottom;
+} android_native_rect_t;
+
+// ---------------------------------------------------------------------------
+
+typedef struct android_native_base_t
+{
+    /* a magic value defined by the actual EGL native type */
+    int magic;
+
+    /* the sizeof() of the actual EGL native type */
+    int version;
+
+    void* reserved[4];
+
+    /* reference-counting interface */
+    void (*incRef)(struct android_native_base_t* base);
+    void (*decRef)(struct android_native_base_t* base);
+} android_native_base_t;
+
+typedef struct ANativeWindowBuffer
+{
+#ifdef __cplusplus
+    ANativeWindowBuffer() {
+        common.magic = ANDROID_NATIVE_BUFFER_MAGIC;
+        common.version = sizeof(ANativeWindowBuffer);
+        memset(common.reserved, 0, sizeof(common.reserved));
+    }
+
+    // Implement the methods that sp<ANativeWindowBuffer> expects so that it
+    // can be used to automatically refcount ANativeWindowBuffer's.
+    void incStrong(const void* /*id*/) const {
+        common.incRef(const_cast<android_native_base_t*>(&common));
+    }
+    void decStrong(const void* /*id*/) const {
+        common.decRef(const_cast<android_native_base_t*>(&common));
+    }
+#endif
+
+    struct android_native_base_t common;
+
+    int width;
+    int height;
+    int stride;
+    int format;
+    int usage;
+    uintptr_t layerCount;
+
+    void* reserved[1];
+
+    buffer_handle_t handle;
+
+    void* reserved_proc[8];
+} ANativeWindowBuffer_t;
+
+// Old typedef for backwards compatibility.
+typedef ANativeWindowBuffer_t android_native_buffer_t;
+
+// ---------------------------------------------------------------------------
+
+/* attributes queriable with query() */
+enum {
+    NATIVE_WINDOW_WIDTH     = 0,
+    NATIVE_WINDOW_HEIGHT    = 1,
+    NATIVE_WINDOW_FORMAT    = 2,
+
+    /* The minimum number of buffers that must remain un-dequeued after a buffer
+     * has been queued.  This value applies only if set_buffer_count was used to
+     * override the number of buffers and if a buffer has since been queued.
+     * Users of the set_buffer_count ANativeWindow method should query this
+     * value before calling set_buffer_count.  If it is necessary to have N
+     * buffers simultaneously dequeued as part of the steady-state operation,
+     * and this query returns M then N+M buffers should be requested via
+     * native_window_set_buffer_count.
+     *
+     * Note that this value does NOT apply until a single buffer has been
+     * queued.  In particular this means that it is possible to:
+     *
+     * 1. Query M = min undequeued buffers
+     * 2. Set the buffer count to N + M
+     * 3. Dequeue all N + M buffers
+     * 4. Cancel M buffers
+     * 5. Queue, dequeue, queue, dequeue, ad infinitum
+     */
+    NATIVE_WINDOW_MIN_UNDEQUEUED_BUFFERS = 3,
+
+    /* Check whether queueBuffer operations on the ANativeWindow send the buffer
+     * to the window compositor.  The query sets the returned 'value' argument
+     * to 1 if the ANativeWindow DOES send queued buffers directly to the window
+     * compositor and 0 if the buffers do not go directly to the window
+     * compositor.
+     *
+     * This can be used to determine whether protected buffer content should be
+     * sent to the ANativeWindow.  Note, however, that a result of 1 does NOT
+     * indicate that queued buffers will be protected from applications or users
+     * capturing their contents.  If that behavior is desired then some other
+     * mechanism (e.g. the GRALLOC_USAGE_PROTECTED flag) should be used in
+     * conjunction with this query.
+     */
+    NATIVE_WINDOW_QUEUES_TO_WINDOW_COMPOSER = 4,
+
+    /* Get the concrete type of a ANativeWindow.  See below for the list of
+     * possible return values.
+     *
+     * This query should not be used outside the Android framework and will
+     * likely be removed in the near future.
+     */
+    NATIVE_WINDOW_CONCRETE_TYPE = 5,
+
+
+    /*
+     * Default width and height of ANativeWindow buffers, these are the
+     * dimensions of the window buffers irrespective of the
+     * NATIVE_WINDOW_SET_BUFFERS_DIMENSIONS call and match the native window
+     * size unless overridden by NATIVE_WINDOW_SET_BUFFERS_USER_DIMENSIONS.
+     */
+    NATIVE_WINDOW_DEFAULT_WIDTH = 6,
+    NATIVE_WINDOW_DEFAULT_HEIGHT = 7,
+
+    /*
+     * transformation that will most-likely be applied to buffers. This is only
+     * a hint, the actual transformation applied might be different.
+     *
+     * INTENDED USE:
+     *
+     * The transform hint can be used by a producer, for instance the GLES
+     * driver, to pre-rotate the rendering such that the final transformation
+     * in the composer is identity. This can be very useful when used in
+     * conjunction with the h/w composer HAL, in situations where it
+     * cannot handle arbitrary rotations.
+     *
+     * 1. Before dequeuing a buffer, the GL driver (or any other ANW client)
+     *    queries the ANW for NATIVE_WINDOW_TRANSFORM_HINT.
+     *
+     * 2. The GL driver overrides the width and height of the ANW to
+     *    account for NATIVE_WINDOW_TRANSFORM_HINT. This is done by querying
+     *    NATIVE_WINDOW_DEFAULT_{WIDTH | HEIGHT}, swapping the dimensions
+     *    according to NATIVE_WINDOW_TRANSFORM_HINT and calling
+     *    native_window_set_buffers_dimensions().
+     *
+     * 3. The GL driver dequeues a buffer of the new pre-rotated size.
+     *
+     * 4. The GL driver renders to the buffer such that the image is
+     *    already transformed, that is applying NATIVE_WINDOW_TRANSFORM_HINT
+     *    to the rendering.
+     *
+     * 5. The GL driver calls native_window_set_transform to apply
+     *    inverse transformation to the buffer it just rendered.
+     *    In order to do this, the GL driver needs
+     *    to calculate the inverse of NATIVE_WINDOW_TRANSFORM_HINT, this is
+     *    done easily:
+     *
+     *        int hintTransform, inverseTransform;
+     *        query(..., NATIVE_WINDOW_TRANSFORM_HINT, &hintTransform);
+     *        inverseTransform = hintTransform;
+     *        if (hintTransform & HAL_TRANSFORM_ROT_90)
+     *            inverseTransform ^= HAL_TRANSFORM_ROT_180;
+     *
+     *
+     * 6. The GL driver queues the pre-transformed buffer.
+     *
+     * 7. The composer combines the buffer transform with the display
+     *    transform.  If the buffer transform happens to cancel out the
+     *    display transform then no rotation is needed.
+     *
+     */
+    NATIVE_WINDOW_TRANSFORM_HINT = 8,
+
+    /*
+     * Boolean that indicates whether the consumer is running more than
+     * one buffer behind the producer.
+     */
+    NATIVE_WINDOW_CONSUMER_RUNNING_BEHIND = 9,
+
+    /*
+     * The consumer gralloc usage bits currently set by the consumer.
+     * The values are defined in hardware/libhardware/include/gralloc.h.
+     */
+    NATIVE_WINDOW_CONSUMER_USAGE_BITS = 10,
+
+    /**
+     * Transformation that will by applied to buffers by the hwcomposer.
+     * This must not be set or checked by producer endpoints, and will
+     * disable the transform hint set in SurfaceFlinger (see
+     * NATIVE_WINDOW_TRANSFORM_HINT).
+     *
+     * INTENDED USE:
+     * Temporary - Please do not use this.  This is intended only to be used
+     * by the camera's LEGACY mode.
+     *
+     * In situations where a SurfaceFlinger client wishes to set a transform
+     * that is not visible to the producer, and will always be applied in the
+     * hardware composer, the client can set this flag with
+     * native_window_set_buffers_sticky_transform.  This can be used to rotate
+     * and flip buffers consumed by hardware composer without actually changing
+     * the aspect ratio of the buffers produced.
+     */
+    NATIVE_WINDOW_STICKY_TRANSFORM = 11,
+
+    /**
+     * The default data space for the buffers as set by the consumer.
+     * The values are defined in graphics.h.
+     */
+    NATIVE_WINDOW_DEFAULT_DATASPACE = 12,
+
+    /*
+     * Returns the age of the contents of the most recently dequeued buffer as
+     * the number of frames that have elapsed since it was last queued. For
+     * example, if the window is double-buffered, the age of any given buffer in
+     * steady state will be 2. If the dequeued buffer has never been queued, its
+     * age will be 0.
+     */
+    NATIVE_WINDOW_BUFFER_AGE = 13,
+
+    /*
+     * Returns the duration of the last dequeueBuffer call in microseconds
+     */
+    NATIVE_WINDOW_LAST_DEQUEUE_DURATION = 14,
+
+    /*
+     * Returns the duration of the last queueBuffer call in microseconds
+     */
+    NATIVE_WINDOW_LAST_QUEUE_DURATION = 15,
+
+    /*
+     * Returns the number of image layers that the ANativeWindow buffer
+     * contains. By default this is 1, unless a buffer is explicitly allocated
+     * to contain multiple layers.
+     */
+    NATIVE_WINDOW_LAYER_COUNT = 16,
+
+    /*
+     * Returns 1 if the native window is valid, 0 otherwise. native window is valid
+     * if it is safe (i.e. no crash will occur) to call any method on it.
+     */
+    NATIVE_WINDOW_IS_VALID = 17,
+};
+
+/* Valid operations for the (*perform)() hook.
+ *
+ * Values marked as 'deprecated' are supported, but have been superceded by
+ * other functionality.
+ *
+ * Values marked as 'private' should be considered private to the framework.
+ * HAL implementation code with access to an ANativeWindow should not use these,
+ * as it may not interact properly with the framework's use of the
+ * ANativeWindow.
+ */
+enum {
+// clang-format off
+    NATIVE_WINDOW_SET_USAGE                 =  0,
+    NATIVE_WINDOW_CONNECT                   =  1,   /* deprecated */
+    NATIVE_WINDOW_DISCONNECT                =  2,   /* deprecated */
+    NATIVE_WINDOW_SET_CROP                  =  3,   /* private */
+    NATIVE_WINDOW_SET_BUFFER_COUNT          =  4,
+    NATIVE_WINDOW_SET_BUFFERS_GEOMETRY      =  5,   /* deprecated */
+    NATIVE_WINDOW_SET_BUFFERS_TRANSFORM     =  6,
+    NATIVE_WINDOW_SET_BUFFERS_TIMESTAMP     =  7,
+    NATIVE_WINDOW_SET_BUFFERS_DIMENSIONS    =  8,
+    NATIVE_WINDOW_SET_BUFFERS_FORMAT        =  9,
+    NATIVE_WINDOW_SET_SCALING_MODE          = 10,   /* private */
+    NATIVE_WINDOW_LOCK                      = 11,   /* private */
+    NATIVE_WINDOW_UNLOCK_AND_POST           = 12,   /* private */
+    NATIVE_WINDOW_API_CONNECT               = 13,   /* private */
+    NATIVE_WINDOW_API_DISCONNECT            = 14,   /* private */
+    NATIVE_WINDOW_SET_BUFFERS_USER_DIMENSIONS = 15, /* private */
+    NATIVE_WINDOW_SET_POST_TRANSFORM_CROP   = 16,   /* private */
+    NATIVE_WINDOW_SET_BUFFERS_STICKY_TRANSFORM = 17,/* private */
+    NATIVE_WINDOW_SET_SIDEBAND_STREAM       = 18,
+    NATIVE_WINDOW_SET_BUFFERS_DATASPACE     = 19,
+    NATIVE_WINDOW_SET_SURFACE_DAMAGE        = 20,   /* private */
+    NATIVE_WINDOW_SET_SHARED_BUFFER_MODE    = 21,
+    NATIVE_WINDOW_SET_AUTO_REFRESH          = 22,
+    NATIVE_WINDOW_GET_REFRESH_CYCLE_DURATION= 23,
+    NATIVE_WINDOW_GET_NEXT_FRAME_ID         = 24,
+    NATIVE_WINDOW_ENABLE_FRAME_TIMESTAMPS   = 25,
+    NATIVE_WINDOW_GET_COMPOSITOR_TIMING     = 26,
+    NATIVE_WINDOW_GET_FRAME_TIMESTAMPS      = 27,
+    NATIVE_WINDOW_GET_WIDE_COLOR_SUPPORT    = 28,
+    NATIVE_WINDOW_GET_HDR_SUPPORT           = 29,
+// clang-format on
+};
+
+/* parameter for NATIVE_WINDOW_[API_][DIS]CONNECT */
+enum {
+    /* Buffers will be queued by EGL via eglSwapBuffers after being filled using
+     * OpenGL ES.
+     */
+    NATIVE_WINDOW_API_EGL = 1,
+
+    /* Buffers will be queued after being filled using the CPU
+     */
+    NATIVE_WINDOW_API_CPU = 2,
+
+    /* Buffers will be queued by Stagefright after being filled by a video
+     * decoder.  The video decoder can either be a software or hardware decoder.
+     */
+    NATIVE_WINDOW_API_MEDIA = 3,
+
+    /* Buffers will be queued by the the camera HAL.
+     */
+    NATIVE_WINDOW_API_CAMERA = 4,
+};
+
+/* parameter for NATIVE_WINDOW_SET_BUFFERS_TRANSFORM */
+enum {
+    /* flip source image horizontally */
+    NATIVE_WINDOW_TRANSFORM_FLIP_H = HAL_TRANSFORM_FLIP_H ,
+    /* flip source image vertically */
+    NATIVE_WINDOW_TRANSFORM_FLIP_V = HAL_TRANSFORM_FLIP_V,
+    /* rotate source image 90 degrees clock-wise, and is applied after TRANSFORM_FLIP_{H|V} */
+    NATIVE_WINDOW_TRANSFORM_ROT_90 = HAL_TRANSFORM_ROT_90,
+    /* rotate source image 180 degrees */
+    NATIVE_WINDOW_TRANSFORM_ROT_180 = HAL_TRANSFORM_ROT_180,
+    /* rotate source image 270 degrees clock-wise */
+    NATIVE_WINDOW_TRANSFORM_ROT_270 = HAL_TRANSFORM_ROT_270,
+    /* transforms source by the inverse transform of the screen it is displayed onto. This
+     * transform is applied last */
+    NATIVE_WINDOW_TRANSFORM_INVERSE_DISPLAY = 0x08
+};
+
+/* parameter for NATIVE_WINDOW_SET_SCALING_MODE
+ * keep in sync with Surface.java in frameworks/base */
+enum {
+    /* the window content is not updated (frozen) until a buffer of
+     * the window size is received (enqueued)
+     */
+    NATIVE_WINDOW_SCALING_MODE_FREEZE           = 0,
+    /* the buffer is scaled in both dimensions to match the window size */
+    NATIVE_WINDOW_SCALING_MODE_SCALE_TO_WINDOW  = 1,
+    /* the buffer is scaled uniformly such that the smaller dimension
+     * of the buffer matches the window size (cropping in the process)
+     */
+    NATIVE_WINDOW_SCALING_MODE_SCALE_CROP       = 2,
+    /* the window is clipped to the size of the buffer's crop rectangle; pixels
+     * outside the crop rectangle are treated as if they are completely
+     * transparent.
+     */
+    NATIVE_WINDOW_SCALING_MODE_NO_SCALE_CROP    = 3,
+};
+
+/* values returned by the NATIVE_WINDOW_CONCRETE_TYPE query */
+enum {
+    NATIVE_WINDOW_FRAMEBUFFER               = 0, /* FramebufferNativeWindow */
+    NATIVE_WINDOW_SURFACE                   = 1, /* Surface */
+};
+
+/* parameter for NATIVE_WINDOW_SET_BUFFERS_TIMESTAMP
+ *
+ * Special timestamp value to indicate that timestamps should be auto-generated
+ * by the native window when queueBuffer is called.  This is equal to INT64_MIN,
+ * defined directly to avoid problems with C99/C++ inclusion of stdint.h.
+ */
+static const int64_t NATIVE_WINDOW_TIMESTAMP_AUTO = (-9223372036854775807LL-1);
+
+struct ANativeWindow
+{
+#ifdef __cplusplus
+    ANativeWindow()
+        : flags(0), minSwapInterval(0), maxSwapInterval(0), xdpi(0), ydpi(0)
+    {
+        common.magic = ANDROID_NATIVE_WINDOW_MAGIC;
+        common.version = sizeof(ANativeWindow);
+        memset(common.reserved, 0, sizeof(common.reserved));
+    }
+
+    /* Implement the methods that sp<ANativeWindow> expects so that it
+       can be used to automatically refcount ANativeWindow's. */
+    void incStrong(const void* /*id*/) const {
+        common.incRef(const_cast<android_native_base_t*>(&common));
+    }
+    void decStrong(const void* /*id*/) const {
+        common.decRef(const_cast<android_native_base_t*>(&common));
+    }
+#endif
+
+    struct android_native_base_t common;
+
+    /* flags describing some attributes of this surface or its updater */
+    const uint32_t flags;
+
+    /* min swap interval supported by this updated */
+    const int   minSwapInterval;
+
+    /* max swap interval supported by this updated */
+    const int   maxSwapInterval;
+
+    /* horizontal and vertical resolution in DPI */
+    const float xdpi;
+    const float ydpi;
+
+    /* Some storage reserved for the OEM's driver. */
+    intptr_t    oem[4];
+
+    /*
+     * Set the swap interval for this surface.
+     *
+     * Returns 0 on success or -errno on error.
+     */
+    int     (*setSwapInterval)(struct ANativeWindow* window,
+                int interval);
+
+    /*
+     * Hook called by EGL to acquire a buffer. After this call, the buffer
+     * is not locked, so its content cannot be modified. This call may block if
+     * no buffers are available.
+     *
+     * The window holds a reference to the buffer between dequeueBuffer and
+     * either queueBuffer or cancelBuffer, so clients only need their own
+     * reference if they might use the buffer after queueing or canceling it.
+     * Holding a reference to a buffer after queueing or canceling it is only
+     * allowed if a specific buffer count has been set.
+     *
+     * Returns 0 on success or -errno on error.
+     *
+     * XXX: This function is deprecated.  It will continue to work for some
+     * time for binary compatibility, but the new dequeueBuffer function that
+     * outputs a fence file descriptor should be used in its place.
+     */
+    int     (*dequeueBuffer_DEPRECATED)(struct ANativeWindow* window,
+                struct ANativeWindowBuffer** buffer);
+
+    /*
+     * hook called by EGL to lock a buffer. This MUST be called before modifying
+     * the content of a buffer. The buffer must have been acquired with
+     * dequeueBuffer first.
+     *
+     * Returns 0 on success or -errno on error.
+     *
+     * XXX: This function is deprecated.  It will continue to work for some
+     * time for binary compatibility, but it is essentially a no-op, and calls
+     * to it should be removed.
+     */
+    int     (*lockBuffer_DEPRECATED)(struct ANativeWindow* window,
+                struct ANativeWindowBuffer* buffer);
+
+    /*
+     * Hook called by EGL when modifications to the render buffer are done.
+     * This unlocks and post the buffer.
+     *
+     * The window holds a reference to the buffer between dequeueBuffer and
+     * either queueBuffer or cancelBuffer, so clients only need their own
+     * reference if they might use the buffer after queueing or canceling it.
+     * Holding a reference to a buffer after queueing or canceling it is only
+     * allowed if a specific buffer count has been set.
+     *
+     * Buffers MUST be queued in the same order than they were dequeued.
+     *
+     * Returns 0 on success or -errno on error.
+     *
+     * XXX: This function is deprecated.  It will continue to work for some
+     * time for binary compatibility, but the new queueBuffer function that
+     * takes a fence file descriptor should be used in its place (pass a value
+     * of -1 for the fence file descriptor if there is no valid one to pass).
+     */
+    int     (*queueBuffer_DEPRECATED)(struct ANativeWindow* window,
+                struct ANativeWindowBuffer* buffer);
+
+    /*
+     * hook used to retrieve information about the native window.
+     *
+     * Returns 0 on success or -errno on error.
+     */
+    int     (*query)(const struct ANativeWindow* window,
+                int what, int* value);
+
+    /*
+     * hook used to perform various operations on the surface.
+     * (*perform)() is a generic mechanism to add functionality to
+     * ANativeWindow while keeping backward binary compatibility.
+     *
+     * DO NOT CALL THIS HOOK DIRECTLY.  Instead, use the helper functions
+     * defined below.
+     *
+     * (*perform)() returns -ENOENT if the 'what' parameter is not supported
+     * by the surface's implementation.
+     *
+     * See above for a list of valid operations, such as
+     * NATIVE_WINDOW_SET_USAGE or NATIVE_WINDOW_CONNECT
+     */
+    int     (*perform)(struct ANativeWindow* window,
+                int operation, ... );
+
+    /*
+     * Hook used to cancel a buffer that has been dequeued.
+     * No synchronization is performed between dequeue() and cancel(), so
+     * either external synchronization is needed, or these functions must be
+     * called from the same thread.
+     *
+     * The window holds a reference to the buffer between dequeueBuffer and
+     * either queueBuffer or cancelBuffer, so clients only need their own
+     * reference if they might use the buffer after queueing or canceling it.
+     * Holding a reference to a buffer after queueing or canceling it is only
+     * allowed if a specific buffer count has been set.
+     *
+     * XXX: This function is deprecated.  It will continue to work for some
+     * time for binary compatibility, but the new cancelBuffer function that
+     * takes a fence file descriptor should be used in its place (pass a value
+     * of -1 for the fence file descriptor if there is no valid one to pass).
+     */
+    int     (*cancelBuffer_DEPRECATED)(struct ANativeWindow* window,
+                struct ANativeWindowBuffer* buffer);
+
+    /*
+     * Hook called by EGL to acquire a buffer. This call may block if no
+     * buffers are available.
+     *
+     * The window holds a reference to the buffer between dequeueBuffer and
+     * either queueBuffer or cancelBuffer, so clients only need their own
+     * reference if they might use the buffer after queueing or canceling it.
+     * Holding a reference to a buffer after queueing or canceling it is only
+     * allowed if a specific buffer count has been set.
+     *
+     * The libsync fence file descriptor returned in the int pointed to by the
+     * fenceFd argument will refer to the fence that must signal before the
+     * dequeued buffer may be written to.  A value of -1 indicates that the
+     * caller may access the buffer immediately without waiting on a fence.  If
+     * a valid file descriptor is returned (i.e. any value except -1) then the
+     * caller is responsible for closing the file descriptor.
+     *
+     * Returns 0 on success or -errno on error.
+     */
+    int     (*dequeueBuffer)(struct ANativeWindow* window,
+                struct ANativeWindowBuffer** buffer, int* fenceFd);
+
+    /*
+     * Hook called by EGL when modifications to the render buffer are done.
+     * This unlocks and post the buffer.
+     *
+     * The window holds a reference to the buffer between dequeueBuffer and
+     * either queueBuffer or cancelBuffer, so clients only need their own
+     * reference if they might use the buffer after queueing or canceling it.
+     * Holding a reference to a buffer after queueing or canceling it is only
+     * allowed if a specific buffer count has been set.
+     *
+     * The fenceFd argument specifies a libsync fence file descriptor for a
+     * fence that must signal before the buffer can be accessed.  If the buffer
+     * can be accessed immediately then a value of -1 should be used.  The
+     * caller must not use the file descriptor after it is passed to
+     * queueBuffer, and the ANativeWindow implementation is responsible for
+     * closing it.
+     *
+     * Returns 0 on success or -errno on error.
+     */
+    int     (*queueBuffer)(struct ANativeWindow* window,
+                struct ANativeWindowBuffer* buffer, int fenceFd);
+
+    /*
+     * Hook used to cancel a buffer that has been dequeued.
+     * No synchronization is performed between dequeue() and cancel(), so
+     * either external synchronization is needed, or these functions must be
+     * called from the same thread.
+     *
+     * The window holds a reference to the buffer between dequeueBuffer and
+     * either queueBuffer or cancelBuffer, so clients only need their own
+     * reference if they might use the buffer after queueing or canceling it.
+     * Holding a reference to a buffer after queueing or canceling it is only
+     * allowed if a specific buffer count has been set.
+     *
+     * The fenceFd argument specifies a libsync fence file decsriptor for a
+     * fence that must signal before the buffer can be accessed.  If the buffer
+     * can be accessed immediately then a value of -1 should be used.
+     *
+     * Note that if the client has not waited on the fence that was returned
+     * from dequeueBuffer, that same fence should be passed to cancelBuffer to
+     * ensure that future uses of the buffer are preceded by a wait on that
+     * fence.  The caller must not use the file descriptor after it is passed
+     * to cancelBuffer, and the ANativeWindow implementation is responsible for
+     * closing it.
+     *
+     * Returns 0 on success or -errno on error.
+     */
+    int     (*cancelBuffer)(struct ANativeWindow* window,
+                struct ANativeWindowBuffer* buffer, int fenceFd);
+};
+
+ /* Backwards compatibility: use ANativeWindow (struct ANativeWindow in C).
+  * android_native_window_t is deprecated.
+  */
+typedef struct ANativeWindow ANativeWindow;
+typedef struct ANativeWindow android_native_window_t __deprecated;
+
+/*
+ *  native_window_set_usage(..., usage)
+ *  Sets the intended usage flags for the next buffers
+ *  acquired with (*lockBuffer)() and on.
+ *  By default (if this function is never called), a usage of
+ *      GRALLOC_USAGE_HW_RENDER | GRALLOC_USAGE_HW_TEXTURE
+ *  is assumed.
+ *  Calling this function will usually cause following buffers to be
+ *  reallocated.
+ */
+
+static inline int native_window_set_usage(
+        struct ANativeWindow* window, int usage)
+{
+    return window->perform(window, NATIVE_WINDOW_SET_USAGE, usage);
+}
+
+/* deprecated. Always returns 0. Don't call. */
+static inline int native_window_connect(
+        struct ANativeWindow* window __UNUSED, int api __UNUSED) __deprecated;
+
+static inline int native_window_connect(
+        struct ANativeWindow* window __UNUSED, int api __UNUSED) {
+    return 0;
+}
+
+/* deprecated. Always returns 0. Don't call. */
+static inline int native_window_disconnect(
+        struct ANativeWindow* window __UNUSED, int api __UNUSED) __deprecated;
+
+static inline int native_window_disconnect(
+        struct ANativeWindow* window __UNUSED, int api __UNUSED) {
+    return 0;
+}
+
+/*
+ * native_window_set_crop(..., crop)
+ * Sets which region of the next queued buffers needs to be considered.
+ * Depending on the scaling mode, a buffer's crop region is scaled and/or
+ * cropped to match the surface's size.  This function sets the crop in
+ * pre-transformed buffer pixel coordinates.
+ *
+ * The specified crop region applies to all buffers queued after it is called.
+ *
+ * If 'crop' is NULL, subsequently queued buffers won't be cropped.
+ *
+ * An error is returned if for instance the crop region is invalid, out of the
+ * buffer's bound or if the window is invalid.
+ */
+static inline int native_window_set_crop(
+        struct ANativeWindow* window,
+        android_native_rect_t const * crop)
+{
+    return window->perform(window, NATIVE_WINDOW_SET_CROP, crop);
+}
+
+/*
+ * native_window_set_post_transform_crop(..., crop)
+ * Sets which region of the next queued buffers needs to be considered.
+ * Depending on the scaling mode, a buffer's crop region is scaled and/or
+ * cropped to match the surface's size.  This function sets the crop in
+ * post-transformed pixel coordinates.
+ *
+ * The specified crop region applies to all buffers queued after it is called.
+ *
+ * If 'crop' is NULL, subsequently queued buffers won't be cropped.
+ *
+ * An error is returned if for instance the crop region is invalid, out of the
+ * buffer's bound or if the window is invalid.
+ */
+static inline int native_window_set_post_transform_crop(
+        struct ANativeWindow* window,
+        android_native_rect_t const * crop)
+{
+    return window->perform(window, NATIVE_WINDOW_SET_POST_TRANSFORM_CROP, crop);
+}
+
+/*
+ * native_window_set_active_rect(..., active_rect)
+ *
+ * This function is deprecated and will be removed soon.  For now it simply
+ * sets the post-transform crop for compatibility while multi-project commits
+ * get checked.
+ */
+static inline int native_window_set_active_rect(
+        struct ANativeWindow* window,
+        android_native_rect_t const * active_rect) __deprecated;
+
+static inline int native_window_set_active_rect(
+        struct ANativeWindow* window,
+        android_native_rect_t const * active_rect)
+{
+    return native_window_set_post_transform_crop(window, active_rect);
+}
+
+/*
+ * native_window_set_buffer_count(..., count)
+ * Sets the number of buffers associated with this native window.
+ */
+static inline int native_window_set_buffer_count(
+        struct ANativeWindow* window,
+        size_t bufferCount)
+{
+    return window->perform(window, NATIVE_WINDOW_SET_BUFFER_COUNT, bufferCount);
+}
+
+/*
+ * native_window_set_buffers_geometry(..., int w, int h, int format)
+ * All buffers dequeued after this call will have the dimensions and format
+ * specified.  A successful call to this function has the same effect as calling
+ * native_window_set_buffers_size and native_window_set_buffers_format.
+ *
+ * XXX: This function is deprecated.  The native_window_set_buffers_dimensions
+ * and native_window_set_buffers_format functions should be used instead.
+ */
+static inline int native_window_set_buffers_geometry(
+        struct ANativeWindow* window,
+        int w, int h, int format) __deprecated;
+
+static inline int native_window_set_buffers_geometry(
+        struct ANativeWindow* window,
+        int w, int h, int format)
+{
+    return window->perform(window, NATIVE_WINDOW_SET_BUFFERS_GEOMETRY,
+            w, h, format);
+}
+
+/*
+ * native_window_set_buffers_dimensions(..., int w, int h)
+ * All buffers dequeued after this call will have the dimensions specified.
+ * In particular, all buffers will have a fixed-size, independent from the
+ * native-window size. They will be scaled according to the scaling mode
+ * (see native_window_set_scaling_mode) upon window composition.
+ *
+ * If w and h are 0, the normal behavior is restored. That is, dequeued buffers
+ * following this call will be sized to match the window's size.
+ *
+ * Calling this function will reset the window crop to a NULL value, which
+ * disables cropping of the buffers.
+ */
+static inline int native_window_set_buffers_dimensions(
+        struct ANativeWindow* window,
+        int w, int h)
+{
+    return window->perform(window, NATIVE_WINDOW_SET_BUFFERS_DIMENSIONS,
+            w, h);
+}
+
+/*
+ * native_window_set_buffers_user_dimensions(..., int w, int h)
+ *
+ * Sets the user buffer size for the window, which overrides the
+ * window's size.  All buffers dequeued after this call will have the
+ * dimensions specified unless overridden by
+ * native_window_set_buffers_dimensions.  All buffers will have a
+ * fixed-size, independent from the native-window size. They will be
+ * scaled according to the scaling mode (see
+ * native_window_set_scaling_mode) upon window composition.
+ *
+ * If w and h are 0, the normal behavior is restored. That is, the
+ * default buffer size will match the windows's size.
+ *
+ * Calling this function will reset the window crop to a NULL value, which
+ * disables cropping of the buffers.
+ */
+static inline int native_window_set_buffers_user_dimensions(
+        struct ANativeWindow* window,
+        int w, int h)
+{
+    return window->perform(window, NATIVE_WINDOW_SET_BUFFERS_USER_DIMENSIONS,
+            w, h);
+}
+
+/*
+ * native_window_set_buffers_format(..., int format)
+ * All buffers dequeued after this call will have the format specified.
+ *
+ * If the specified format is 0, the default buffer format will be used.
+ */
+static inline int native_window_set_buffers_format(
+        struct ANativeWindow* window,
+        int format)
+{
+    return window->perform(window, NATIVE_WINDOW_SET_BUFFERS_FORMAT, format);
+}
+
+/*
+ * native_window_set_buffers_data_space(..., int dataSpace)
+ * All buffers queued after this call will be associated with the dataSpace
+ * parameter specified.
+ *
+ * dataSpace specifies additional information about the buffer that's dependent
+ * on the buffer format and the endpoints. For example, it can be used to convey
+ * the color space of the image data in the buffer, or it can be used to
+ * indicate that the buffers contain depth measurement data instead of color
+ * images.  The default dataSpace is 0, HAL_DATASPACE_UNKNOWN, unless it has been
+ * overridden by the consumer.
+ */
+static inline int native_window_set_buffers_data_space(
+        struct ANativeWindow* window,
+        android_dataspace_t dataSpace)
+{
+    return window->perform(window, NATIVE_WINDOW_SET_BUFFERS_DATASPACE,
+            dataSpace);
+}
+
+/*
+ * native_window_set_buffers_transform(..., int transform)
+ * All buffers queued after this call will be displayed transformed according
+ * to the transform parameter specified.
+ */
+static inline int native_window_set_buffers_transform(
+        struct ANativeWindow* window,
+        int transform)
+{
+    return window->perform(window, NATIVE_WINDOW_SET_BUFFERS_TRANSFORM,
+            transform);
+}
+
+/*
+ * native_window_set_buffers_sticky_transform(..., int transform)
+ * All buffers queued after this call will be displayed transformed according
+ * to the transform parameter specified applied on top of the regular buffer
+ * transform.  Setting this transform will disable the transform hint.
+ *
+ * Temporary - This is only intended to be used by the LEGACY camera mode, do
+ *   not use this for anything else.
+ */
+static inline int native_window_set_buffers_sticky_transform(
+        struct ANativeWindow* window,
+        int transform)
+{
+    return window->perform(window, NATIVE_WINDOW_SET_BUFFERS_STICKY_TRANSFORM,
+            transform);
+}
+
+/*
+ * native_window_set_buffers_timestamp(..., int64_t timestamp)
+ * All buffers queued after this call will be associated with the timestamp
+ * parameter specified. If the timestamp is set to NATIVE_WINDOW_TIMESTAMP_AUTO
+ * (the default), timestamps will be generated automatically when queueBuffer is
+ * called. The timestamp is measured in nanoseconds, and is normally monotonically
+ * increasing. The timestamp should be unaffected by time-of-day adjustments,
+ * and for a camera should be strictly monotonic but for a media player may be
+ * reset when the position is set.
+ */
+static inline int native_window_set_buffers_timestamp(
+        struct ANativeWindow* window,
+        int64_t timestamp)
+{
+    return window->perform(window, NATIVE_WINDOW_SET_BUFFERS_TIMESTAMP,
+            timestamp);
+}
+
+/*
+ * native_window_set_scaling_mode(..., int mode)
+ * All buffers queued after this call will be associated with the scaling mode
+ * specified.
+ */
+static inline int native_window_set_scaling_mode(
+        struct ANativeWindow* window,
+        int mode)
+{
+    return window->perform(window, NATIVE_WINDOW_SET_SCALING_MODE,
+            mode);
+}
+
+/*
+ * native_window_api_connect(..., int api)
+ * connects an API to this window. only one API can be connected at a time.
+ * Returns -EINVAL if for some reason the window cannot be connected, which
+ * can happen if it's connected to some other API.
+ */
+static inline int native_window_api_connect(
+        struct ANativeWindow* window, int api)
+{
+    return window->perform(window, NATIVE_WINDOW_API_CONNECT, api);
+}
+
+/*
+ * native_window_api_disconnect(..., int api)
+ * disconnect the API from this window.
+ * An error is returned if for instance the window wasn't connected in the
+ * first place.
+ */
+static inline int native_window_api_disconnect(
+        struct ANativeWindow* window, int api)
+{
+    return window->perform(window, NATIVE_WINDOW_API_DISCONNECT, api);
+}
+
+/*
+ * native_window_dequeue_buffer_and_wait(...)
+ * Dequeue a buffer and wait on the fence associated with that buffer.  The
+ * buffer may safely be accessed immediately upon this function returning.  An
+ * error is returned if either of the dequeue or the wait operations fail.
+ */
+static inline int native_window_dequeue_buffer_and_wait(ANativeWindow *anw,
+        struct ANativeWindowBuffer** anb) {
+    return anw->dequeueBuffer_DEPRECATED(anw, anb);
+}
+
+/*
+ * native_window_set_sideband_stream(..., native_handle_t*)
+ * Attach a sideband buffer stream to a native window.
+ */
+static inline int native_window_set_sideband_stream(
+        struct ANativeWindow* window,
+        native_handle_t* sidebandHandle)
+{
+    return window->perform(window, NATIVE_WINDOW_SET_SIDEBAND_STREAM,
+            sidebandHandle);
+}
+
+/*
+ * native_window_set_surface_damage(..., android_native_rect_t* rects, int numRects)
+ * Set the surface damage (i.e., the region of the surface that has changed
+ * since the previous frame). The damage set by this call will be reset (to the
+ * default of full-surface damage) after calling queue, so this must be called
+ * prior to every frame with damage that does not cover the whole surface if the
+ * caller desires downstream consumers to use this optimization.
+ *
+ * The damage region is specified as an array of rectangles, with the important
+ * caveat that the origin of the surface is considered to be the bottom-left
+ * corner, as in OpenGL ES.
+ *
+ * If numRects is set to 0, rects may be NULL, and the surface damage will be
+ * set to the full surface (the same as if this function had not been called for
+ * this frame).
+ */
+static inline int native_window_set_surface_damage(
+        struct ANativeWindow* window,
+        const android_native_rect_t* rects, size_t numRects)
+{
+    return window->perform(window, NATIVE_WINDOW_SET_SURFACE_DAMAGE,
+            rects, numRects);
+}
+
+/*
+ * native_window_set_shared_buffer_mode(..., bool sharedBufferMode)
+ * Enable/disable shared buffer mode
+ */
+static inline int native_window_set_shared_buffer_mode(
+        struct ANativeWindow* window,
+        bool sharedBufferMode)
+{
+    return window->perform(window, NATIVE_WINDOW_SET_SHARED_BUFFER_MODE,
+            sharedBufferMode);
+}
+
+/*
+ * native_window_set_auto_refresh(..., autoRefresh)
+ * Enable/disable auto refresh when in shared buffer mode
+ */
+static inline int native_window_set_auto_refresh(
+        struct ANativeWindow* window,
+        bool autoRefresh)
+{
+    return window->perform(window, NATIVE_WINDOW_SET_AUTO_REFRESH, autoRefresh);
+}
+
+static inline int native_window_get_refresh_cycle_duration(
+        struct ANativeWindow* window,
+        int64_t* outRefreshDuration)
+{
+    return window->perform(window, NATIVE_WINDOW_GET_REFRESH_CYCLE_DURATION,
+            outRefreshDuration);
+}
+
+static inline int native_window_get_next_frame_id(
+        struct ANativeWindow* window, uint64_t* frameId)
+{
+    return window->perform(window, NATIVE_WINDOW_GET_NEXT_FRAME_ID, frameId);
+}
+
+static inline int native_window_enable_frame_timestamps(
+        struct ANativeWindow* window, bool enable)
+{
+    return window->perform(window, NATIVE_WINDOW_ENABLE_FRAME_TIMESTAMPS,
+            enable);
+}
+
+static inline int native_window_get_compositor_timing(
+        struct ANativeWindow* window,
+        int64_t* compositeDeadline, int64_t* compositeInterval,
+        int64_t* compositeToPresentLatency)
+{
+    return window->perform(window, NATIVE_WINDOW_GET_COMPOSITOR_TIMING,
+            compositeDeadline, compositeInterval, compositeToPresentLatency);
+}
+
+static inline int native_window_get_frame_timestamps(
+        struct ANativeWindow* window, uint64_t frameId,
+        int64_t* outRequestedPresentTime, int64_t* outAcquireTime,
+        int64_t* outLatchTime, int64_t* outFirstRefreshStartTime,
+        int64_t* outLastRefreshStartTime, int64_t* outGpuCompositionDoneTime,
+        int64_t* outDisplayPresentTime, int64_t* outDequeueReadyTime,
+        int64_t* outReleaseTime)
+{
+    return window->perform(window, NATIVE_WINDOW_GET_FRAME_TIMESTAMPS,
+            frameId, outRequestedPresentTime, outAcquireTime, outLatchTime,
+            outFirstRefreshStartTime, outLastRefreshStartTime,
+            outGpuCompositionDoneTime, outDisplayPresentTime,
+            outDequeueReadyTime, outReleaseTime);
+}
+
+static inline int native_window_get_wide_color_support(
+    struct ANativeWindow* window, bool* outSupport) {
+  return window->perform(window, NATIVE_WINDOW_GET_WIDE_COLOR_SUPPORT,
+                         outSupport);
+}
+
+static inline int native_window_get_hdr_support(struct ANativeWindow* window,
+                                                bool* outSupport) {
+  return window->perform(window, NATIVE_WINDOW_GET_HDR_SUPPORT, outSupport);
+}
+
+__END_DECLS
diff --git a/libsystem/include/system/window.h b/libsystem/include/system/window.h
new file mode 100644
index 0000000..efa10d6
--- /dev/null
+++ b/libsystem/include/system/window.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright (C) 2011 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef SYSTEM_CORE_INCLUDE_ANDROID_WINDOW_H
+#define SYSTEM_CORE_INCLUDE_ANDROID_WINDOW_H
+
+#include <system/window-deprecated.h>
+
+#endif /* SYSTEM_CORE_INCLUDE_ANDROID_WINDOW_H */