move non-HAL definitions to syste/core/include
This patch moves camera- and graphics-related definitions out of the hardware
HAL layer and into system/core. These definitions are used both by the HAL and
by higher-level code as well. More functionality (e.g., audio definitions)
will be moved here as well.
Change-Id: I225f12374ce54fa393640dce53738267d0d703e9
Signed-off-by: Iliyan Malchev <malchev@google.com>
diff --git a/include/system/camera.h b/include/system/camera.h
new file mode 100644
index 0000000..58e0c6f
--- /dev/null
+++ b/include/system/camera.h
@@ -0,0 +1,130 @@
+/*
+ * Copyright (C) 2011 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef SYSTEM_CORE_INCLUDE_ANDROID_CAMERA_H
+#define SYSTEM_CORE_INCLUDE_ANDROID_CAMERA_H
+
+#include <stdint.h>
+#include <sys/cdefs.h>
+#include <sys/types.h>
+#include <cutils/native_handle.h>
+#include <hardware/hardware.h>
+#include <hardware/gralloc.h>
+
+__BEGIN_DECLS
+
+/**
+ * A set of bit masks for specifying how the received preview frames are
+ * handled before the previewCallback() call.
+ *
+ * The least significant 3 bits of an "int" value are used for this purpose:
+ *
+ * ..... 0 0 0
+ * ^ ^ ^
+ * | | |---------> determine whether the callback is enabled or not
+ * | |-----------> determine whether the callback is one-shot or not
+ * |-------------> determine whether the frame is copied out or not
+ *
+ * WARNING: When a frame is sent directly without copying, it is the frame
+ * receiver's responsiblity to make sure that the frame data won't get
+ * corrupted by subsequent preview frames filled by the camera. This flag is
+ * recommended only when copying out data brings significant performance price
+ * and the handling/processing of the received frame data is always faster than
+ * the preview frame rate so that data corruption won't occur.
+ *
+ * For instance,
+ * 1. 0x00 disables the callback. In this case, copy out and one shot bits
+ * are ignored.
+ * 2. 0x01 enables a callback without copying out the received frames. A
+ * typical use case is the Camcorder application to avoid making costly
+ * frame copies.
+ * 3. 0x05 is enabling a callback with frame copied out repeatedly. A typical
+ * use case is the Camera application.
+ * 4. 0x07 is enabling a callback with frame copied out only once. A typical
+ * use case is the Barcode scanner application.
+ */
+
+enum {
+ CAMERA_FRAME_CALLBACK_FLAG_ENABLE_MASK = 0x01,
+ CAMERA_FRAME_CALLBACK_FLAG_ONE_SHOT_MASK = 0x02,
+ CAMERA_FRAME_CALLBACK_FLAG_COPY_OUT_MASK = 0x04,
+ /** Typical use cases */
+ CAMERA_FRAME_CALLBACK_FLAG_NOOP = 0x00,
+ CAMERA_FRAME_CALLBACK_FLAG_CAMCORDER = 0x01,
+ CAMERA_FRAME_CALLBACK_FLAG_CAMERA = 0x05,
+ CAMERA_FRAME_CALLBACK_FLAG_BARCODE_SCANNER = 0x07
+};
+
+/** msgType in notifyCallback and dataCallback functions */
+enum {
+ CAMERA_MSG_ERROR = 0x0001,
+ CAMERA_MSG_SHUTTER = 0x0002,
+ CAMERA_MSG_FOCUS = 0x0004,
+ CAMERA_MSG_ZOOM = 0x0008,
+ CAMERA_MSG_PREVIEW_FRAME = 0x0010,
+ CAMERA_MSG_VIDEO_FRAME = 0x0020,
+ CAMERA_MSG_POSTVIEW_FRAME = 0x0040,
+ CAMERA_MSG_RAW_IMAGE = 0x0080,
+ CAMERA_MSG_COMPRESSED_IMAGE = 0x0100,
+ CAMERA_MSG_RAW_IMAGE_NOTIFY = 0x0200,
+ CAMERA_MSG_ALL_MSGS = 0xFFFF
+};
+
+/** cmdType in sendCommand functions */
+enum {
+ CAMERA_CMD_START_SMOOTH_ZOOM = 1,
+ CAMERA_CMD_STOP_SMOOTH_ZOOM = 2,
+ /** Set the clockwise rotation of preview display (setPreviewDisplay) in
+ * degrees. This affects the preview frames and the picture displayed after
+ * snapshot. This method is useful for portrait mode applications. Note
+ * that preview display of front-facing cameras is flipped horizontally
+ * before the rotation, that is, the image is reflected along the central
+ * vertical axis of the camera sensor. So the users can see themselves as
+ * looking into a mirror.
+ *
+ * This does not affect the order of byte array of
+ * CAMERA_MSG_PREVIEW_FRAME, CAMERA_MSG_VIDEO_FRAME,
+ * CAMERA_MSG_POSTVIEW_FRAME, CAMERA_MSG_RAW_IMAGE, or
+ * CAMERA_MSG_COMPRESSED_IMAGE. This is not allowed to be set during
+ * preview
+ */
+ CAMERA_CMD_SET_DISPLAY_ORIENTATION = 3,
+
+ /** cmdType to disable/enable shutter sound. In sendCommand passing arg1 =
+ * 0 will disable, while passing arg1 = 1 will enable the shutter sound.
+ */
+ CAMERA_CMD_ENABLE_SHUTTER_SOUND = 4,
+
+ /* cmdType to play recording sound */
+ CAMERA_CMD_PLAY_RECORDING_SOUND = 5,
+};
+
+/** camera fatal errors */
+enum {
+ CAMERA_ERROR_UNKNOWN = 1,
+ CAMERA_ERROR_SERVER_DIED = 100
+};
+
+enum {
+ CAMERA_FACING_BACK = 0, /** The facing of the camera is opposite to that of
+ * the screen. */
+ CAMERA_FACING_FRONT = 1 /** The facing of the camera is the same as that of
+ * the screen. */
+};
+
+__END_DECLS
+
+#endif /* SYSTEM_CORE_INCLUDE_ANDROID_CAMERA_H */
diff --git a/include/system/graphics.h b/include/system/graphics.h
new file mode 100644
index 0000000..fab6ec9
--- /dev/null
+++ b/include/system/graphics.h
@@ -0,0 +1,106 @@
+/*
+ * Copyright (C) 2011 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef SYSTEM_CORE_INCLUDE_ANDROID_GRAPHICS_H
+#define SYSTEM_CORE_INCLUDE_ANDROID_GRAPHICS_H
+
+__BEGIN_DECLS
+
+/**
+ * pixel format definitions
+ */
+
+enum {
+ HAL_PIXEL_FORMAT_RGBA_8888 = 1,
+ HAL_PIXEL_FORMAT_RGBX_8888 = 2,
+ HAL_PIXEL_FORMAT_RGB_888 = 3,
+ HAL_PIXEL_FORMAT_RGB_565 = 4,
+ HAL_PIXEL_FORMAT_BGRA_8888 = 5,
+ HAL_PIXEL_FORMAT_RGBA_5551 = 6,
+ HAL_PIXEL_FORMAT_RGBA_4444 = 7,
+
+ /* 0x8 - 0xFF range unavailable */
+
+ /*
+ * 0x100 - 0x1FF
+ *
+ * This range is reserved for pixel formats that are specific to the HAL
+ * implementation. Implementations can use any value in this range to
+ * communicate video pixel formats between their HAL modules. These formats
+ * must not have an alpha channel. Additionally, an EGLimage created from a
+ * gralloc buffer of one of these formats must be supported for use with the
+ * GL_OES_EGL_image_external OpenGL ES extension.
+ */
+
+ /*
+ * Android YUV format:
+ *
+ * This format is exposed outside of the HAL to software
+ * decoders and applications.
+ * EGLImageKHR must support it in conjunction with the
+ * OES_EGL_image_external extension.
+ *
+ * YV12 is 4:2:0 YCrCb planar format comprised of a WxH Y plane followed
+ * by (W/2) x (H/2) Cr and Cb planes.
+ *
+ * This format assumes
+ * - an even width
+ * - an even height
+ * - a horizontal stride multiple of 16 pixels
+ * - a vertical stride equal to the height
+ *
+ * y_size = stride * height
+ * c_size = ALIGN(stride/2, 16) * height/2
+ * size = y_size + c_size * 2
+ * cr_offset = y_size
+ * cb_offset = y_size + c_size
+ *
+ */
+ HAL_PIXEL_FORMAT_YV12 = 0x32315659, // YCrCb 4:2:0 Planar
+
+
+
+ /* Legacy formats (deprecated), used by ImageFormat.java */
+ HAL_PIXEL_FORMAT_YCbCr_422_SP = 0x10, // NV16
+ HAL_PIXEL_FORMAT_YCrCb_420_SP = 0x11, // NV21
+ HAL_PIXEL_FORMAT_YCbCr_422_I = 0x14, // YUY2
+};
+
+
+/**
+ * Transformation definitions
+ *
+ * IMPORTANT NOTE:
+ * HAL_TRANSFORM_ROT_90 is applied CLOCKWISE and AFTER HAL_TRANSFORM_FLIP_{H|V}.
+ *
+ */
+
+enum {
+ /* flip source image horizontally (around the vertical axis) */
+ HAL_TRANSFORM_FLIP_H = 0x01,
+ /* flip source image vertically (around the horizontal axis)*/
+ HAL_TRANSFORM_FLIP_V = 0x02,
+ /* rotate source image 90 degrees clockwise */
+ HAL_TRANSFORM_ROT_90 = 0x04,
+ /* rotate source image 180 degrees */
+ HAL_TRANSFORM_ROT_180 = 0x03,
+ /* rotate source image 270 degrees clockwise */
+ HAL_TRANSFORM_ROT_270 = 0x07,
+};
+
+__END_DECLS
+
+#endif /* SYSTEM_CORE_INCLUDE_ANDROID_GRAPHICS_H */