diff --git a/debuggerd/debuggerd_test.cpp b/debuggerd/debuggerd_test.cpp
index e555793..f415b68 100644
--- a/debuggerd/debuggerd_test.cpp
+++ b/debuggerd/debuggerd_test.cpp
@@ -340,7 +340,12 @@
 
   std::string result;
   ConsumeFd(std::move(output_fd), &result);
-  ASSERT_MATCH(result, R"(signal 11 \(SIGSEGV\), code 1 \(SEGV_MAPERR\), fault addr 0xdead)");
+#ifdef __LP64__
+  ASSERT_MATCH(result,
+               R"(signal 11 \(SIGSEGV\), code 1 \(SEGV_MAPERR\), fault addr 0x000000000000dead)");
+#else
+  ASSERT_MATCH(result, R"(signal 11 \(SIGSEGV\), code 1 \(SEGV_MAPERR\), fault addr 0x0000dead)");
+#endif
 
   if (mte_supported()) {
     // Test that the default TAGGED_ADDR_CTRL value is set.
@@ -371,8 +376,7 @@
 
   // The address can either be tagged (new kernels) or untagged (old kernels).
   ASSERT_MATCH(
-      result,
-      R"(signal 11 \(SIGSEGV\), code 1 \(SEGV_MAPERR\), fault addr (0x100000000000dead|0xdead))");
+      result, R"(signal 11 \(SIGSEGV\), code 1 \(SEGV_MAPERR\), fault addr 0x[01]00000000000dead)");
 }
 
 // Marked as weak to prevent the compiler from removing the malloc in the caller. In theory, the
@@ -423,6 +427,12 @@
     abort();
   }
 }
+
+static void SetTagCheckingLevelAsync() {
+  if (mallopt(M_BIONIC_SET_HEAP_TAGGING_LEVEL, M_HEAP_TAGGING_LEVEL_ASYNC) == 0) {
+    abort();
+  }
+}
 #endif
 
 // Number of iterations required to reliably guarantee a GWP-ASan crash.
@@ -654,6 +664,36 @@
 #endif
 }
 
+TEST_F(CrasherTest, mte_async) {
+#if defined(__aarch64__)
+  if (!mte_supported()) {
+    GTEST_SKIP() << "Requires MTE";
+  }
+
+  int intercept_result;
+  unique_fd output_fd;
+  StartProcess([&]() {
+    SetTagCheckingLevelAsync();
+    volatile int* p = (volatile int*)malloc(16);
+    p[-1] = 42;
+  });
+
+  StartIntercept(&output_fd);
+  FinishCrasher();
+  AssertDeath(SIGSEGV);
+  FinishIntercept(&intercept_result);
+
+  ASSERT_EQ(1, intercept_result) << "tombstoned reported failure";
+
+  std::string result;
+  ConsumeFd(std::move(output_fd), &result);
+
+  ASSERT_MATCH(result, R"(signal 11 \(SIGSEGV\), code 8 \(SEGV_MTEAERR\), fault addr --------)");
+#else
+  GTEST_SKIP() << "Requires aarch64";
+#endif
+}
+
 TEST_F(CrasherTest, mte_multiple_causes) {
 #if defined(__aarch64__)
   if (!mte_supported()) {
@@ -704,7 +744,7 @@
   for (const auto& result : log_sources) {
     ASSERT_MATCH(result, R"(signal 11 \(SIGSEGV\))");
     ASSERT_THAT(result, HasSubstr("Note: multiple potential causes for this crash were detected, "
-                                  "listing them in decreasing order of probability."));
+                                  "listing them in decreasing order of likelihood."));
     // Adjacent untracked allocations may cause us to see the wrong underflow here (or only
     // overflows), so we can't match explicitly for an underflow message.
     ASSERT_MATCH(result,
@@ -891,7 +931,7 @@
 
   std::string result;
   ConsumeFd(std::move(output_fd), &result);
-  ASSERT_MATCH(result, R"(signal 11 \(SIGSEGV\), code 1 \(SEGV_MAPERR\), fault addr 0xdead)");
+  ASSERT_MATCH(result, R"(signal 11 \(SIGSEGV\), code 1 \(SEGV_MAPERR\), fault addr 0x0+dead)");
 }
 
 TEST_F(CrasherTest, abort) {
@@ -1941,7 +1981,7 @@
 
   std::string result;
   ConsumeFd(std::move(output_fd), &result);
-  ASSERT_MATCH(result, R"(signal 11 \(SIGSEGV\), code 1 \(SEGV_MAPERR\), fault addr 0x1024)");
+  ASSERT_MATCH(result, R"(signal 11 \(SIGSEGV\), code 1 \(SEGV_MAPERR\), fault addr 0x0+1024)");
 
   ASSERT_MATCH(result, R"(\nmemory map \(.*\):\n)");
 
@@ -1971,8 +2011,8 @@
   std::string result;
   ConsumeFd(std::move(output_fd), &result);
 
-  std::string match_str = R"(signal 11 \(SIGSEGV\), code 1 \(SEGV_MAPERR\), fault addr )";
-  match_str += android::base::StringPrintf("0x%" PRIxPTR, crash_uptr);
+  std::string match_str = R"(signal 11 \(SIGSEGV\), code 1 \(SEGV_MAPERR\), fault addr 0x)";
+  match_str += format_full_pointer(crash_uptr);
   ASSERT_MATCH(result, match_str);
 
   ASSERT_MATCH(result, R"(\nmemory map \(.*\): \(fault address prefixed with --->)\n)");
@@ -2019,8 +2059,8 @@
   std::string result;
   ConsumeFd(std::move(output_fd), &result);
 
-  std::string match_str = R"(signal 11 \(SIGSEGV\), code 1 \(SEGV_MAPERR\), fault addr )";
-  match_str += android::base::StringPrintf("%p", middle_ptr);
+  std::string match_str = R"(signal 11 \(SIGSEGV\), code 1 \(SEGV_MAPERR\), fault addr 0x)";
+  match_str += format_full_pointer(reinterpret_cast<uintptr_t>(middle_ptr));
   ASSERT_MATCH(result, match_str);
 
   ASSERT_MATCH(result, R"(\nmemory map \(.*\): \(fault address prefixed with --->)\n)");
@@ -2057,8 +2097,8 @@
   std::string result;
   ConsumeFd(std::move(output_fd), &result);
 
-  std::string match_str = R"(signal 11 \(SIGSEGV\), code 2 \(SEGV_ACCERR\), fault addr )";
-  match_str += android::base::StringPrintf("%p", ptr);
+  std::string match_str = R"(signal 11 \(SIGSEGV\), code 2 \(SEGV_ACCERR\), fault addr 0x)";
+  match_str += format_full_pointer(reinterpret_cast<uintptr_t>(ptr));
   ASSERT_MATCH(result, match_str);
 
   ASSERT_MATCH(result, R"(\nmemory map \(.*\): \(fault address prefixed with --->)\n)");
@@ -2182,7 +2222,7 @@
   ConsumeFd(std::move(output_fd), &result);
 
   // Verify the process crashed properly.
-  ASSERT_MATCH(result, R"(signal 11 \(SIGSEGV\), code 1 \(SEGV_MAPERR\), fault addr 0x0)");
+  ASSERT_MATCH(result, R"(signal 11 \(SIGSEGV\), code 1 \(SEGV_MAPERR\), fault addr 0x0*)");
 
   // Now verify that the dex_pc frame includes a proper function name.
   ASSERT_MATCH(result, R"( \[anon:dex\] \(Main\.\<init\>\+2)");
diff --git a/debuggerd/libdebuggerd/scudo.cpp b/debuggerd/libdebuggerd/scudo.cpp
index f4690ba..a89f385 100644
--- a/debuggerd/libdebuggerd/scudo.cpp
+++ b/debuggerd/libdebuggerd/scudo.cpp
@@ -135,7 +135,7 @@
   if (error_info_.reports[1].error_type != UNKNOWN) {
     _LOG(log, logtype::HEADER,
          "\nNote: multiple potential causes for this crash were detected, listing them in "
-         "decreasing order of probability.\n");
+         "decreasing order of likelihood.\n");
   }
 
   size_t report_num = 0;
diff --git a/debuggerd/libdebuggerd/tombstone_proto_to_text.cpp b/debuggerd/libdebuggerd/tombstone_proto_to_text.cpp
index 5a13f84..de86b0a 100644
--- a/debuggerd/libdebuggerd/tombstone_proto_to_text.cpp
+++ b/debuggerd/libdebuggerd/tombstone_proto_to_text.cpp
@@ -293,6 +293,7 @@
 
 static void print_main_thread(CallbackType callback, const Tombstone& tombstone,
                               const Thread& thread) {
+  int word_size = pointer_width(tombstone);
   print_thread_header(callback, tombstone, thread, true);
 
   const Signal& signal_info = tombstone.signal_info();
@@ -308,7 +309,7 @@
   } else {
     std::string fault_addr_desc;
     if (signal_info.has_fault_address()) {
-      fault_addr_desc = StringPrintf("0x%" PRIx64, signal_info.fault_address());
+      fault_addr_desc = StringPrintf("0x%0*" PRIx64, 2 * word_size, signal_info.fault_address());
     } else {
       fault_addr_desc = "--------";
     }
@@ -332,7 +333,7 @@
   if (tombstone.causes_size() > 1) {
     CBS("");
     CBL("Note: multiple potential causes for this crash were detected, listing them in decreasing "
-        "order of probability.");
+        "order of likelihood.");
   }
 
   for (const Cause& cause : tombstone.causes()) {
@@ -370,7 +371,6 @@
     return;
   }
 
-  int word_size = pointer_width(tombstone);
   const auto format_pointer = [word_size](uint64_t ptr) -> std::string {
     if (word_size == 8) {
       uint64_t top = ptr >> 32;
diff --git a/debuggerd/libdebuggerd/utility.cpp b/debuggerd/libdebuggerd/utility.cpp
index 3c4c271..71f0c09 100644
--- a/debuggerd/libdebuggerd/utility.cpp
+++ b/debuggerd/libdebuggerd/utility.cpp
@@ -276,9 +276,10 @@
     case SIGBUS:
     case SIGFPE:
     case SIGILL:
-    case SIGSEGV:
     case SIGTRAP:
       return true;
+    case SIGSEGV:
+      return si->si_code != SEGV_MTEAERR;
     default:
       return false;
   }
diff --git a/fs_mgr/fs_mgr_fstab.cpp b/fs_mgr/fs_mgr_fstab.cpp
index 159be67..30d77b5 100644
--- a/fs_mgr/fs_mgr_fstab.cpp
+++ b/fs_mgr/fs_mgr_fstab.cpp
@@ -188,9 +188,9 @@
 #undef CheckFlag
 
         // Then handle flags that take an argument.
-        if (flag == "encryptable=userdata") {
+        if (StartsWith(flag, "encryptable=")) {
             // The "encryptable" flag identifies adoptable storage volumes.  The
-            // argument to this flag must be "userdata".
+            // argument to this flag is ignored, but it should be "userdata".
             //
             // Historical note: this flag was originally meant just for /data,
             // to indicate that FDE (full disk encryption) can be enabled.
@@ -198,8 +198,7 @@
             // storage volumes.  Today, FDE is no longer supported, leaving only
             // the adoptable storage volume meaning for this flag.
             entry->fs_mgr_flags.crypt = true;
-        } else if (StartsWith(flag, "encryptable=") || StartsWith(flag, "forceencrypt=") ||
-                   StartsWith(flag, "forcefdeorfbe=")) {
+        } else if (StartsWith(flag, "forceencrypt=") || StartsWith(flag, "forcefdeorfbe=")) {
             LERROR << "flag no longer supported: " << flag;
             return false;
         } else if (StartsWith(flag, "voldmanaged=")) {
@@ -307,7 +306,13 @@
         }
     }
 
-    if (entry->fs_mgr_flags.crypt && !entry->fs_mgr_flags.vold_managed) {
+    // FDE is no longer supported, so reject "encryptable" when used without
+    // "vold_managed".  For now skip this check when in recovery mode, since
+    // some recovery fstabs still contain the FDE options since they didn't do
+    // anything in recovery mode anyway (except possibly to cause the
+    // reservation of a crypto footer) and thus never got removed.
+    if (entry->fs_mgr_flags.crypt && !entry->fs_mgr_flags.vold_managed &&
+        access("/system/bin/recovery", F_OK) != 0) {
         LERROR << "FDE is no longer supported; 'encryptable' can only be used for adoptable "
                   "storage";
         return false;
diff --git a/init/README.md b/init/README.md
index 6c29b07..b10ca9e 100644
--- a/init/README.md
+++ b/init/README.md
@@ -487,11 +487,6 @@
   not already running.  See the start entry for more information on
   starting services.
 
-`class_start_post_data <serviceclass>`
-> Like `class_start`, but only considers services that were started
-  after /data was mounted, and that were running at the time
- `class_reset_post_data` was called. Only used for FDE devices.
-
 `class_stop <serviceclass>`
 > Stop and disable all services of the specified class if they are
   currently running.
@@ -501,10 +496,6 @@
   currently running, without disabling them. They can be restarted
   later using `class_start`.
 
-`class_reset_post_data <serviceclass>`
-> Like `class_reset`, but only considers services that were started
-  after /data was mounted. Only used for FDE devices.
-
 `class_restart <serviceclass>`
 > Restarts all services of the specified class.
 
@@ -607,8 +598,7 @@
   Properties are expanded within _level_.
 
 `mark_post_data`
-> Used to mark the point right after /data is mounted. Used to implement the
-  `class_reset_post_data` and `class_start_post_data` commands.
+> Used to mark the point right after /data is mounted.
 
 `mkdir <path> [<mode>] [<owner>] [<group>] [encryption=<action>] [key=<key>]`
 > Create a directory at _path_, optionally with the given mode, owner, and
diff --git a/init/builtins.cpp b/init/builtins.cpp
index e9c717a..50a0cb2 100644
--- a/init/builtins.cpp
+++ b/init/builtins.cpp
@@ -46,7 +46,6 @@
 #include <map>
 #include <memory>
 
-#include <ApexProperties.sysprop.h>
 #include <InitProperties.sysprop.h>
 #include <android-base/chrono_utils.h>
 #include <android-base/file.h>
@@ -177,28 +176,6 @@
     return {};
 }
 
-static Result<void> do_class_start_post_data(const BuiltinArguments& args) {
-    if (args.context != kInitContext) {
-        return Error() << "command 'class_start_post_data' only available in init context";
-    }
-    static bool is_apex_updatable = android::sysprop::ApexProperties::updatable().value_or(false);
-
-    if (!is_apex_updatable) {
-        // No need to start these on devices that don't support APEX, since they're not
-        // stopped either.
-        return {};
-    }
-    for (const auto& service : ServiceList::GetInstance()) {
-        if (service->classnames().count(args[1])) {
-            if (auto result = service->StartIfPostData(); !result.ok()) {
-                LOG(ERROR) << "Could not start service '" << service->name()
-                           << "' as part of class '" << args[1] << "': " << result.error();
-            }
-        }
-    }
-    return {};
-}
-
 static Result<void> do_class_stop(const BuiltinArguments& args) {
     ForEachServiceInClass(args[1], &Service::Stop);
     return {};
@@ -209,19 +186,6 @@
     return {};
 }
 
-static Result<void> do_class_reset_post_data(const BuiltinArguments& args) {
-    if (args.context != kInitContext) {
-        return Error() << "command 'class_reset_post_data' only available in init context";
-    }
-    static bool is_apex_updatable = android::sysprop::ApexProperties::updatable().value_or(false);
-    if (!is_apex_updatable) {
-        // No need to stop these on devices that don't support APEX.
-        return {};
-    }
-    ForEachServiceInClass(args[1], &Service::ResetIfPostData);
-    return {};
-}
-
 static Result<void> do_class_restart(const BuiltinArguments& args) {
     // Do not restart a class if it has a property persist.dont_start_class.CLASS set to 1.
     if (android::base::GetBoolProperty("persist.init.dont_start_class." + args[1], false))
@@ -1428,10 +1392,8 @@
         {"chmod",                   {2,     2,    {true,   do_chmod}}},
         {"chown",                   {2,     3,    {true,   do_chown}}},
         {"class_reset",             {1,     1,    {false,  do_class_reset}}},
-        {"class_reset_post_data",   {1,     1,    {false,  do_class_reset_post_data}}},
         {"class_restart",           {1,     1,    {false,  do_class_restart}}},
         {"class_start",             {1,     1,    {false,  do_class_start}}},
-        {"class_start_post_data",   {1,     1,    {false,  do_class_start_post_data}}},
         {"class_stop",              {1,     1,    {false,  do_class_stop}}},
         {"copy",                    {2,     2,    {true,   do_copy}}},
         {"copy_per_line",           {2,     2,    {true,   do_copy_per_line}}},
diff --git a/init/service.cpp b/init/service.cpp
index 489dd67..f7318cb 100644
--- a/init/service.cpp
+++ b/init/service.cpp
@@ -661,25 +661,6 @@
     StopOrReset(SVC_RESET);
 }
 
-void Service::ResetIfPostData() {
-    if (post_data_) {
-        if (flags_ & SVC_RUNNING) {
-            running_at_post_data_reset_ = true;
-        }
-        StopOrReset(SVC_RESET);
-    }
-}
-
-Result<void> Service::StartIfPostData() {
-    // Start the service, but only if it was started after /data was mounted,
-    // and it was still running when we reset the post-data services.
-    if (running_at_post_data_reset_) {
-        return Start();
-    }
-
-    return {};
-}
-
 void Service::Stop() {
     StopOrReset(SVC_DISABLED);
 }
diff --git a/init/service.h b/init/service.h
index ccf6899..3289f54 100644
--- a/init/service.h
+++ b/init/service.h
@@ -80,10 +80,8 @@
     Result<void> ExecStart();
     Result<void> Start();
     Result<void> StartIfNotDisabled();
-    Result<void> StartIfPostData();
     Result<void> Enable();
     void Reset();
-    void ResetIfPostData();
     void Stop();
     void Terminate();
     void Timeout();
@@ -214,8 +212,6 @@
 
     bool post_data_ = false;
 
-    bool running_at_post_data_reset_ = false;
-
     std::optional<std::string> on_failure_reboot_target_;
 
     bool from_apex_ = false;
diff --git a/rootdir/init.rc b/rootdir/init.rc
index 939b92d..cae4e82 100644
--- a/rootdir/init.rc
+++ b/rootdir/init.rc
@@ -460,11 +460,6 @@
     class_stop charger
     trigger late-init
 
-on load_persist_props_action
-    load_persist_props
-    start logd
-    start logd-reinit
-
 # Indicate to fw loaders that the relevant mounts are up.
 on firmware_mounts_complete
     rm /dev/.booting
@@ -491,9 +486,6 @@
     # /data, which in turn can only be loaded when system properties are present.
     trigger post-fs-data
 
-    # Load persist properties and override properties (if enabled) from /data.
-    trigger load_persist_props_action
-
     # Should be before netd, but after apex, properties and logging is available.
     trigger load_bpf_programs
 
@@ -676,6 +668,18 @@
     # use of MAX_BOOT_LEVEL keys.
     exec - system system -- /system/bin/vdc keymaster earlyBootEnded
 
+    # Multi-installed APEXes are selected using persist props.
+    # Load persist properties and override properties (if enabled) from /data,
+    # before starting apexd.
+    load_persist_props
+    start logd
+    start logd-reinit
+    # Some existing vendor rc files use 'on load_persist_props_action' to know
+    # when persist props are ready. These are difficult to change due to GRF,
+    # so continue triggering this action here even though props are already loaded
+    # by the 'load_persist_props' call above.
+    trigger load_persist_props_action
+
     # /data/apex is now available. Start apexd to scan and activate APEXes.
     #
     # To handle userspace reboots as well as devices that use FDE, make sure