vmbase/src/memory/shared.rs

// Copyright 2023, The Android Open Source Project
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
//     http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.

//! Shared memory management.

use super::dbm::{flush_dirty_range, mark_dirty_block, set_dbm_enabled};
use super::error::MemoryTrackerError;
use super::page_table::{is_leaf_pte, PageTable, MMIO_LAZY_MAP_FLAG};
use super::util::{page_4kb_of, virt_to_phys};
use crate::dsb;
use crate::util::RangeExt as _;
use aarch64_paging::paging::{Attributes, Descriptor, MemoryRegion as VaRange, VirtualAddress};
use alloc::alloc::{alloc_zeroed, dealloc, handle_alloc_error};
use alloc::boxed::Box;
use alloc::vec::Vec;
use buddy_system_allocator::{FrameAllocator, LockedFrameAllocator};
use core::alloc::Layout;
use core::num::NonZeroUsize;
use core::ops::Range;
use core::ptr::NonNull;
use core::result;
use hyp::{get_hypervisor, MMIO_GUARD_GRANULE_SIZE};
use log::{debug, error, trace};
use once_cell::race::OnceBox;
use spin::mutex::SpinMutex;
use tinyvec::ArrayVec;

/// A global static variable representing the system memory tracker, protected by a spin mutex.
pub static MEMORY: SpinMutex<Option<MemoryTracker>> = SpinMutex::new(None);

static SHARED_POOL: OnceBox<LockedFrameAllocator<32>> = OnceBox::new();
static SHARED_MEMORY: SpinMutex<Option<MemorySharer>> = SpinMutex::new(None);

/// Memory range.
pub type MemoryRange = Range<usize>;

fn get_va_range(range: &MemoryRange) -> VaRange {
    VaRange::new(range.start, range.end)
}

type Result<T> = result::Result<T, MemoryTrackerError>;

#[derive(Clone, Copy, Debug, Default, PartialEq)]
enum MemoryType {
    #[default]
    ReadOnly,
    ReadWrite,
}

#[derive(Clone, Debug, Default)]
struct MemoryRegion {
    range: MemoryRange,
    mem_type: MemoryType,
}

/// Tracks non-overlapping slices of main memory.
pub struct MemoryTracker {
    total: MemoryRange,
    page_table: PageTable,
    regions: ArrayVec<[MemoryRegion; MemoryTracker::CAPACITY]>,
    mmio_regions: ArrayVec<[MemoryRange; MemoryTracker::MMIO_CAPACITY]>,
    mmio_range: MemoryRange,
    payload_range: Option<MemoryRange>,
}

// TODO: Remove this once aarch64-paging crate is updated.
// SAFETY: Only `PageTable` doesn't implement Send, but it should.
unsafe impl Send for MemoryTracker {}

impl MemoryTracker {
    const CAPACITY: usize = 5;
    const MMIO_CAPACITY: usize = 5;

    /// Creates a new instance from an active page table, covering the maximum RAM size.
    pub fn new(
        mut page_table: PageTable,
        total: MemoryRange,
        mmio_range: MemoryRange,
        payload_range: Option<Range<VirtualAddress>>,
    ) -> Self {
        assert!(
            !total.overlaps(&mmio_range),
            "MMIO space should not overlap with the main memory region."
        );

        // Activate dirty state management first, otherwise we may get permission faults immediately
        // after activating the new page table. This has no effect before the new page table is
        // activated because none of the entries in the initial idmap have the DBM flag.
        set_dbm_enabled(true);

        debug!("Activating dynamic page table...");
        // SAFETY: page_table duplicates the static mappings for everything that the Rust code is
        // aware of so activating it shouldn't have any visible effect.
        unsafe { page_table.activate() }
        debug!("... Success!");

        Self {
            total,
            page_table,
            regions: ArrayVec::new(),
            mmio_regions: ArrayVec::new(),
            mmio_range,
            payload_range: payload_range.map(|r| r.start.0..r.end.0),
        }
    }

    /// Resize the total RAM size.
    ///
    /// This function fails if it contains regions that are not included within the new size.
    pub fn shrink(&mut self, range: &MemoryRange) -> Result<()> {
        if range.start != self.total.start {
            return Err(MemoryTrackerError::DifferentBaseAddress);
        }
        if self.total.end < range.end {
            return Err(MemoryTrackerError::SizeTooLarge);
        }
        if !self.regions.iter().all(|r| r.range.is_within(range)) {
            return Err(MemoryTrackerError::SizeTooSmall);
        }

        self.total = range.clone();
        Ok(())
    }

    /// Allocate the address range for a const slice; returns None if failed.
    pub fn alloc_range(&mut self, range: &MemoryRange) -> Result<MemoryRange> {
        let region = MemoryRegion { range: range.clone(), mem_type: MemoryType::ReadOnly };
        self.check(&region)?;
        self.page_table.map_rodata(&get_va_range(range)).map_err(|e| {
            error!("Error during range allocation: {e}");
            MemoryTrackerError::FailedToMap
        })?;
        self.add(region)
    }

    /// Allocate the address range for a mutable slice; returns None if failed.
    pub fn alloc_range_mut(&mut self, range: &MemoryRange) -> Result<MemoryRange> {
        let region = MemoryRegion { range: range.clone(), mem_type: MemoryType::ReadWrite };
        self.check(&region)?;
        self.page_table.map_data_dbm(&get_va_range(range)).map_err(|e| {
            error!("Error during mutable range allocation: {e}");
            MemoryTrackerError::FailedToMap
        })?;
        self.add(region)
    }

    /// Allocate the address range for a const slice; returns None if failed.
    pub fn alloc(&mut self, base: usize, size: NonZeroUsize) -> Result<MemoryRange> {
        self.alloc_range(&(base..(base + size.get())))
    }

    /// Allocate the address range for a mutable slice; returns None if failed.
    pub fn alloc_mut(&mut self, base: usize, size: NonZeroUsize) -> Result<MemoryRange> {
        self.alloc_range_mut(&(base..(base + size.get())))
    }

    /// Checks that the given range of addresses is within the MMIO region, and then maps it
    /// appropriately.
    pub fn map_mmio_range(&mut self, range: MemoryRange) -> Result<()> {
        if !range.is_within(&self.mmio_range) {
            return Err(MemoryTrackerError::OutOfRange);
        }
        if self.mmio_regions.iter().any(|r| range.overlaps(r)) {
            return Err(MemoryTrackerError::Overlaps);
        }
        if self.mmio_regions.len() == self.mmio_regions.capacity() {
            return Err(MemoryTrackerError::Full);
        }

        self.page_table.map_device_lazy(&get_va_range(&range)).map_err(|e| {
            error!("Error during MMIO device mapping: {e}");
            MemoryTrackerError::FailedToMap
        })?;

        if self.mmio_regions.try_push(range).is_some() {
            return Err(MemoryTrackerError::Full);
        }

        Ok(())
    }

    /// Checks that the given region is within the range of the `MemoryTracker` and doesn't overlap
    /// with any other previously allocated regions, and that the regions ArrayVec has capacity to
    /// add it.
    fn check(&self, region: &MemoryRegion) -> Result<()> {
        if !region.range.is_within(&self.total) {
            return Err(MemoryTrackerError::OutOfRange);
        }
        if self.regions.iter().any(|r| region.range.overlaps(&r.range)) {
            return Err(MemoryTrackerError::Overlaps);
        }
        if self.regions.len() == self.regions.capacity() {
            return Err(MemoryTrackerError::Full);
        }
        Ok(())
    }

    fn add(&mut self, region: MemoryRegion) -> Result<MemoryRange> {
        if self.regions.try_push(region).is_some() {
            return Err(MemoryTrackerError::Full);
        }

        Ok(self.regions.last().unwrap().range.clone())
    }

    /// Unmaps all tracked MMIO regions from the MMIO guard.
    ///
    /// Note that they are not unmapped from the page table.
    pub fn mmio_unmap_all(&mut self) -> Result<()> {
        for range in &self.mmio_regions {
            self.page_table
                .modify_range(&get_va_range(range), &mmio_guard_unmap_page)
                .map_err(|_| MemoryTrackerError::FailedToUnmap)?;
        }
        Ok(())
    }

    /// Initialize the shared heap to dynamically share memory from the global allocator.
    pub fn init_dynamic_shared_pool(&mut self, granule: usize) -> Result<()> {
        const INIT_CAP: usize = 10;

        let previous = SHARED_MEMORY.lock().replace(MemorySharer::new(granule, INIT_CAP));
        if previous.is_some() {
            return Err(MemoryTrackerError::SharedMemorySetFailure);
        }

        SHARED_POOL
            .set(Box::new(LockedFrameAllocator::new()))
            .map_err(|_| MemoryTrackerError::SharedPoolSetFailure)?;

        Ok(())
    }

    /// Initialize the shared heap from a static region of memory.
    ///
    /// Some hypervisors such as Gunyah do not support a MemShare API for guest
    /// to share its memory with host. Instead they allow host to designate part
    /// of guest memory as "shared" ahead of guest starting its execution. The
    /// shared memory region is indicated in swiotlb node. On such platforms use
    /// a separate heap to allocate buffers that can be shared with host.
    pub fn init_static_shared_pool(&mut self, range: Range<usize>) -> Result<()> {
        let size = NonZeroUsize::new(range.len()).unwrap();
        let range = self.alloc_mut(range.start, size)?;
        let shared_pool = LockedFrameAllocator::<32>::new();

        shared_pool.lock().insert(range);

        SHARED_POOL
            .set(Box::new(shared_pool))
            .map_err(|_| MemoryTrackerError::SharedPoolSetFailure)?;

        Ok(())
    }

    /// Unshares any memory that may have been shared.
    pub fn unshare_all_memory(&mut self) {
        drop(SHARED_MEMORY.lock().take());
    }

    /// Handles translation fault for blocks flagged for lazy MMIO mapping by enabling the page
    /// table entry and MMIO guard mapping the block. Breaks apart a block entry if required.
    pub fn handle_mmio_fault(&mut self, addr: usize) -> Result<()> {
        let page_start = VirtualAddress(page_4kb_of(addr));
        let page_range: VaRange = (page_start..page_start + MMIO_GUARD_GRANULE_SIZE).into();
        self.page_table
            .modify_range(&page_range, &verify_lazy_mapped_block)
            .map_err(|_| MemoryTrackerError::InvalidPte)?;
        get_hypervisor().mmio_guard_map(page_start.0)?;
        // Maps a single device page, breaking up block mappings if necessary.
        self.page_table.map_device(&page_range).map_err(|_| MemoryTrackerError::FailedToMap)
    }

    /// Flush all memory regions marked as writable-dirty.
    fn flush_dirty_pages(&mut self) -> Result<()> {
        // Collect memory ranges for which dirty state is tracked.
        let writable_regions =
            self.regions.iter().filter(|r| r.mem_type == MemoryType::ReadWrite).map(|r| &r.range);
        // Execute a barrier instruction to ensure all hardware updates to the page table have been
        // observed before reading PTE flags to determine dirty state.
        dsb!("ish");
        // Now flush writable-dirty pages in those regions.
        for range in writable_regions.chain(self.payload_range.as_ref().into_iter()) {
            self.page_table
                .modify_range(&get_va_range(range), &flush_dirty_range)
                .map_err(|_| MemoryTrackerError::FlushRegionFailed)?;
        }
        Ok(())
    }

    /// Handles permission fault for read-only blocks by setting writable-dirty state.
    /// In general, this should be called from the exception handler when hardware dirty
    /// state management is disabled or unavailable.
    pub fn handle_permission_fault(&mut self, addr: usize) -> Result<()> {
        let addr = VirtualAddress(addr);
        self.page_table
            .modify_range(&(addr..addr + 1).into(), &mark_dirty_block)
            .map_err(|_| MemoryTrackerError::SetPteDirtyFailed)
    }
}

impl Drop for MemoryTracker {
    fn drop(&mut self) {
        set_dbm_enabled(false);
        self.flush_dirty_pages().unwrap();
        self.unshare_all_memory();
    }
}

/// Allocates a memory range of at least the given size and alignment that is shared with the host.
/// Returns a pointer to the buffer.
pub fn alloc_shared(layout: Layout) -> hyp::Result<NonNull<u8>> {
    assert_ne!(layout.size(), 0);
    let Some(buffer) = try_shared_alloc(layout) else {
        handle_alloc_error(layout);
    };

    trace!("Allocated shared buffer at {buffer:?} with {layout:?}");
    Ok(buffer)
}

fn try_shared_alloc(layout: Layout) -> Option<NonNull<u8>> {
    let mut shared_pool = SHARED_POOL.get().unwrap().lock();

    if let Some(buffer) = shared_pool.alloc_aligned(layout) {
        Some(NonNull::new(buffer as _).unwrap())
    } else if let Some(shared_memory) = SHARED_MEMORY.lock().as_mut() {
        shared_memory.refill(&mut shared_pool, layout);
        shared_pool.alloc_aligned(layout).map(|buffer| NonNull::new(buffer as _).unwrap())
    } else {
        None
    }
}

/// Unshares and deallocates a memory range which was previously allocated by `alloc_shared`.
///
/// The layout passed in must be the same layout passed to the original `alloc_shared` call.
///
/// # Safety
///
/// The memory must have been allocated by `alloc_shared` with the same layout, and not yet
/// deallocated.
pub unsafe fn dealloc_shared(vaddr: NonNull<u8>, layout: Layout) -> hyp::Result<()> {
    SHARED_POOL.get().unwrap().lock().dealloc_aligned(vaddr.as_ptr() as usize, layout);

    trace!("Deallocated shared buffer at {vaddr:?} with {layout:?}");
    Ok(())
}

/// Allocates memory on the heap and shares it with the host.
///
/// Unshares all pages when dropped.
struct MemorySharer {
    granule: usize,
    shared_regions: Vec<(usize, Layout)>,
}

impl MemorySharer {
    /// Constructs a new `MemorySharer` instance with the specified granule size and capacity.
    /// `granule` must be a power of 2.
    fn new(granule: usize, capacity: usize) -> Self {
        assert!(granule.is_power_of_two());
        Self { granule, shared_regions: Vec::with_capacity(capacity) }
    }

    /// Gets from the global allocator a granule-aligned region that suits `hint` and share it.
    fn refill(&mut self, pool: &mut FrameAllocator<32>, hint: Layout) {
        let layout = hint.align_to(self.granule).unwrap().pad_to_align();
        assert_ne!(layout.size(), 0);
        // SAFETY: layout has non-zero size.
        let Some(shared) = NonNull::new(unsafe { alloc_zeroed(layout) }) else {
            handle_alloc_error(layout);
        };

        let base = shared.as_ptr() as usize;
        let end = base.checked_add(layout.size()).unwrap();
        trace!("Sharing memory region {:#x?}", base..end);
        for vaddr in (base..end).step_by(self.granule) {
            let vaddr = NonNull::new(vaddr as *mut _).unwrap();
            get_hypervisor().mem_share(virt_to_phys(vaddr).try_into().unwrap()).unwrap();
        }
        self.shared_regions.push((base, layout));

        pool.add_frame(base, end);
    }
}

impl Drop for MemorySharer {
    fn drop(&mut self) {
        while let Some((base, layout)) = self.shared_regions.pop() {
            let end = base.checked_add(layout.size()).unwrap();
            trace!("Unsharing memory region {:#x?}", base..end);
            for vaddr in (base..end).step_by(self.granule) {
                let vaddr = NonNull::new(vaddr as *mut _).unwrap();
                get_hypervisor().mem_unshare(virt_to_phys(vaddr).try_into().unwrap()).unwrap();
            }

            // SAFETY: The region was obtained from alloc_zeroed() with the recorded layout.
            unsafe { dealloc(base as *mut _, layout) };
        }
    }
}

/// Checks whether block flags indicate it should be MMIO guard mapped.
fn verify_lazy_mapped_block(
    _range: &VaRange,
    desc: &mut Descriptor,
    level: usize,
) -> result::Result<(), ()> {
    let flags = desc.flags().expect("Unsupported PTE flags set");
    if !is_leaf_pte(&flags, level) {
        return Ok(()); // Skip table PTEs as they aren't tagged with MMIO_LAZY_MAP_FLAG.
    }
    if flags.contains(MMIO_LAZY_MAP_FLAG) && !flags.contains(Attributes::VALID) {
        Ok(())
    } else {
        Err(())
    }
}

/// MMIO guard unmaps page
fn mmio_guard_unmap_page(
    va_range: &VaRange,
    desc: &mut Descriptor,
    level: usize,
) -> result::Result<(), ()> {
    let flags = desc.flags().expect("Unsupported PTE flags set");
    if !is_leaf_pte(&flags, level) {
        return Ok(());
    }
    // This function will be called on an address range that corresponds to a device. Only if a
    // page has been accessed (written to or read from), will it contain the VALID flag and be MMIO
    // guard mapped. Therefore, we can skip unmapping invalid pages, they were never MMIO guard
    // mapped anyway.
    if flags.contains(Attributes::VALID) {
        assert!(
            flags.contains(MMIO_LAZY_MAP_FLAG),
            "Attempting MMIO guard unmap for non-device pages"
        );
        assert_eq!(
            va_range.len(),
            MMIO_GUARD_GRANULE_SIZE,
            "Failed to break down block mapping before MMIO guard mapping"
        );
        let page_base = va_range.start().0;
        assert_eq!(page_base % MMIO_GUARD_GRANULE_SIZE, 0);
        // Since mmio_guard_map takes IPAs, if pvmfw moves non-ID address mapping, page_base
        // should be converted to IPA. However, since 0x0 is a valid MMIO address, we don't use
        // virt_to_phys here, and just pass page_base instead.
        get_hypervisor().mmio_guard_unmap(page_base).map_err(|e| {
            error!("Error MMIO guard unmapping: {e}");
        })?;
    }
    Ok(())
}