diff --git a/docs/getting_started/index.md b/docs/getting_started/index.md
index 25eb909..62529b3 100644
--- a/docs/getting_started/index.md
+++ b/docs/getting_started/index.md
@@ -11,8 +11,8 @@
 We support the following device:
 
 * aosp_cf_x86_64_phone (Cuttlefish a.k.a. Cloud Android)
-* oriole (Pixel 6)
-* raven (Pixel 6 Pro)
+* oriole/raven (Pixel 6, and 6 Pro)
+* panther/cheetah (Pixel 7, and 7 Pro)
 
 ### Cuttlefish
 
@@ -30,12 +30,14 @@
 acloud create --local-instance --local-image
 ```
 
-### Pixel 6 and 6 Pro
+### Google Pixel phones
 
-If the device is running Android 12, join the [Android Beta
-Program](https://www.google.com/android/beta) to upgrade to Android 13 Beta.
+If the device is running Android 13 or earlier, join the [Android Beta
+Program](https://developer.android.com/about/versions/14/get#on_pixel) to upgrade to Android 14
+Beta.
 
-Once upgraded to Android 13, execute the following command to enable pKVM.
+Once upgraded to Android 14, and if you are using Pixel 6 or 6 Pro, execute the following command to
+enable pKVM. You don't need to do this for Pixel 7 and 7 Pro.
 
 ```shell
 adb reboot bootloader
@@ -44,41 +46,6 @@
 fastboot reboot
 ```
 
-Due to a bug in Android 13 for these devices, pKVM may stop working after an
-[OTA update](https://source.android.com/devices/tech/ota). To prevent this, it
-is necessary to manually replicate the `pvmfw` partition to the other slot:
-
-```shell
-git -C <android_root>/packages/modules/Virtualization
-show de6b0b2ecf6225a0a7b43241de27e74fc3e6ceb2:pvmfw/pvmfw.img > /tmp/pvmfw.img
-adb reboot bootloader
-fastboot --slot other flash pvmfw /tmp/pvmfw.img
-fastboot reboot
-```
-
-Otherwise, if an OTA has already made pKVM unusable, the working partition
-should be copied to the "current" slot:
-
-```shell
-adb reboot bootloader
-fastboot flash pvmfw /tmp/pvmfw.img
-fastboot reboot
-```
-
-Finally, if the `pvmfw` partition has been corrupted, both slots may be flashed
-using the [`pvmfw.img` pre-built](https://android.googlesource.com/platform/packages/modules/Virtualization/+/08deac98acefd62e222edfa374d5292458cf97eb%5E/pvmfw/pvmfw.img)
-as long as the bootloader remains unlocked. Otherwise, a fresh install of
-Android 13 followed by the manual steps above for flashing the `other` slot
-should be used as a last resort.
-
-Starting in Android 14, `pvmfw.img` can be built using the Android Build system:
-```
-lunch <target>  # where PRODUCT_BUILD_PVMFW_IMAGE=true
-m pvmfwimage    # partition image under ${ANDROID_PRODUCT_OUT}/pvmfw.img
-```
-Note that the result is not intended to be used in Android 13 as not
-backward-compatibility is guaranteed.
-
 ## Running demo app
 
 The instruction is [here](../../demo/README.md).
@@ -140,23 +107,6 @@
 adb shell /apex/com.android.virt/bin/vm run-microdroid --debug full
 ```
 
-The `instance.img` and `apk.idsig` files will be stored in a subdirectory under
-`/data/local/tmp/microdroid`, that `vm` will create.
-
-Atlernatively, you can manually run the demo app on top of Microdroid as follows:
-
-```shell
-UNBUNDLED_BUILD_SDKS_FROM_SOURCE=true TARGET_BUILD_APPS=MicrodroidDemoApp m apps_only dist
-adb shell mkdir -p /data/local/tmp/virt
-adb push out/dist/MicrodroidDemoApp.apk /data/local/tmp/virt/
-adb shell /apex/com.android.virt/bin/vm run-app \
-  --debug full \
-  /data/local/tmp/virt/MicrodroidDemoApp.apk \
-  /data/local/tmp/virt/MicrodroidDemoApp.apk.idsig \
-  /data/local/tmp/virt/instance.img \
-  --payload-path MicrodroidTestNativeLib.so
-```
-
 ## Building and updating CrosVM and VirtualizationService {#building-and-updating}
 
 You can update CrosVM and the VirtualizationService by updating the `com.android.virt` APEX instead
diff --git a/docs/getting_started/pixel6.md b/docs/getting_started/pixel6.md
deleted file mode 100644
index 82391c4..0000000
--- a/docs/getting_started/pixel6.md
+++ /dev/null
@@ -1,129 +0,0 @@
-# Instructions for building custom AVF on Pixel 6 or 6 Pro
-
-This document provides steps for building AVF from AOSP, and then install it to
-Pixel 6 series to better understand AVF and do some experiments.
-
-**WARNING**: Unless Android 13 is released to AOSP (expected to be at Summer
-2022, exact date TBD) by the time when you read this documentation, or you or
-your company have early access to Android Tiramisu source tree, you **CANNOT**
-follow this instruction. In that case, you can only **USE** the AVF that is
-shipped in the Android 13 Beta Image.
-
-This is because AVF in the beta image is signed by Google and therefore it can't
-be updated to a new AVF built in AOSP which can't be signed by the Google key
-that is not shared with AOSP.
-
-## Upgrade to Android 13 Beta Image
-
-First, upgrade your Pixel 6 or Pixel 6 Pro to the Android 13 Beta Image. This
-can be done in two ways:
-
-* Join [Android Beta Program](https://www.google.com/android/beta) and then OTA
-  to Android 13.
-* Manually flash [Android 13 Beta Images](https://developer.android.com/about/versions/13/download#factory-images).
-
-Then enable ADB debugging in "Settings" -> "System" -> "Developer options".
-Finally, enable PKVM.
-
-```shell
-adb reboot bootloader
-fastboot flashing unlock
-fastboot oem pkvm enable
-fastboot reboot
-```
-
-## Building GSI and flashing it
-
-Prepare your Android 13 (Tiramisu) source tree.
-
-```shell
-mkdir tm
-cd tm
-repo init -u <URL> -m <your_tm_branch>
-repo sync -c --no-tags -j 10
-```
-
-Patch GSI so that it includes AVF. Edit
-`build/make/target/product/gsi_release.mk` and add the following line to the
-end (or anywhere in the file that makes sense):
-
-```
-PRODUCT_PACKAGES += com.android.virt
-```
-
-Build GSI.
-
-```shell
-source build/envsetup.sh
-choosecombo 1 aosp_arm64 userdebug
-m
-```
-
-Flash GSI to the Pixel device.
-
-```shell
-adb reboot bootloader
-fastboot reboot fastboot
-fastboot delete-logical-partition product_a
-fastboot flash system out/target/product/generic_arm64/system.img
-fastboot --disable-verification flash vbmeta out/target/product/generic_arm64/vbmeta.img
-fastboot -w reboot
-```
-
-Deleting the logical partition `product_a` is needed because the GSI image is
-bigger than the logical partition `system_a` of the beta image.
-`--disable-verification` when flashing the `vbmeta` partition is critical. Don't
-miss it.
-
-Lastly, check if you are running GSI.
-
-```shell
-adb shell getprop ro.build.product
-adb shell ls /dev/kvm
-adb shell ls /apex/com.android.virt/bin/vm
-```
-
-The result should be as follows.
-
-```
-generic_arm64
-/dev/kvm
-/apex/com.android.virt/bin/vm
-```
-
-## Building and installing AVF from AOSP
-
-Checkout AOSP master branch.
-
-```shell
-mkdir aosp
-cd aosp
-repo init -u https://android.googlesource.com/platform/manifest -b master
-repo sync -c --no-tags -j 10
-```
-
-Then build the `com.android.virt` APEX.
-
-```shell
-source build/envsetup.sh
-banchan com.android.virt aosp_arm64
-UNBUNDLED_BUILD_SDKS_FROM_SOURCE=true m apps_only dist
-```
-
-Install the newly built AVF to the device
-
-```shell
-adb install out/dist/com.android.virt.apex
-adb reboot
-```
-
-If this doesn't work for some reason, try this:
-
-```
-adb root
-adb shell setenforce 0
-adb push out/dist/com.android.virt.apex /data/local/
-adb shell cmd -w apexservice deactivatePackage /system/system_ext/apex/com.android.virt.apex
-adb shell cmd -w apexservice activatePackage /data/local/com.android.virt.apex
-// Don't adb reboot
-```