diff --git a/authfs/fd_server/Android.bp b/authfs/fd_server/Android.bp
index 5097408..db1fd44 100644
--- a/authfs/fd_server/Android.bp
+++ b/authfs/fd_server/Android.bp
@@ -12,6 +12,7 @@
         "libauthfs_fsverity_metadata",
         "libbinder_rs",
         "libclap",
+        "libfsverity_rs",
         "liblibc",
         "liblog_rust",
         "libnix",
@@ -31,6 +32,7 @@
         "libauthfs_fsverity_metadata",
         "libbinder_rs",
         "libclap",
+        "libfsverity_rs",
         "liblibc",
         "liblog_rust",
         "libnix",
diff --git a/authfs/fd_server/src/aidl.rs b/authfs/fd_server/src/aidl.rs
index 01b8209..ada3ffb 100644
--- a/authfs/fd_server/src/aidl.rs
+++ b/authfs/fd_server/src/aidl.rs
@@ -31,7 +31,6 @@
 use std::path::{Component, Path, PathBuf, MAIN_SEPARATOR};
 use std::sync::{Arc, RwLock};
 
-use crate::fsverity;
 use authfs_aidl_interface::aidl::com::android::virt::fs::IVirtFdService::{
     BnVirtFdService, FsStat::FsStat, IVirtFdService, MAX_REQUESTING_DATA,
 };
diff --git a/authfs/fd_server/src/fsverity.rs b/authfs/fd_server/src/fsverity.rs
deleted file mode 100644
index 576f9dd..0000000
--- a/authfs/fd_server/src/fsverity.rs
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * Copyright (C) 2021 The Android Open Source Project
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-use nix::ioctl_readwrite;
-use std::io;
-
-// Constants/values from uapi/linux/fsverity.h
-const FS_VERITY_METADATA_TYPE_MERKLE_TREE: u64 = 1;
-const FS_VERITY_METADATA_TYPE_SIGNATURE: u64 = 3;
-const FS_IOCTL_MAGIC: u8 = b'f';
-const FS_IOCTL_READ_VERITY_METADATA: u8 = 135;
-
-#[repr(C)]
-pub struct fsverity_read_metadata_arg {
-    metadata_type: u64,
-    offset: u64,
-    length: u64,
-    buf_ptr: u64,
-    __reserved: u64,
-}
-
-ioctl_readwrite!(
-    read_verity_metadata,
-    FS_IOCTL_MAGIC,
-    FS_IOCTL_READ_VERITY_METADATA,
-    fsverity_read_metadata_arg
-);
-
-fn read_metadata(fd: i32, metadata_type: u64, offset: u64, buf: &mut [u8]) -> io::Result<usize> {
-    let mut arg = fsverity_read_metadata_arg {
-        metadata_type,
-        offset,
-        length: buf.len() as u64,
-        buf_ptr: buf.as_mut_ptr() as u64,
-        __reserved: 0,
-    };
-    Ok(unsafe { read_verity_metadata(fd, &mut arg) }? as usize)
-}
-
-/// Read the raw Merkle tree from the fd, if it exists. The API semantics is similar to a regular
-/// pread(2), and may not return full requested buffer.
-pub fn read_merkle_tree(fd: i32, offset: u64, buf: &mut [u8]) -> io::Result<usize> {
-    read_metadata(fd, FS_VERITY_METADATA_TYPE_MERKLE_TREE, offset, buf)
-}
-
-/// Read the fs-verity signature from the fd (if exists). The returned signature should be complete.
-pub fn read_signature(fd: i32, buf: &mut [u8]) -> io::Result<usize> {
-    read_metadata(fd, FS_VERITY_METADATA_TYPE_SIGNATURE, 0 /* offset */, buf)
-}
diff --git a/authfs/fd_server/src/main.rs b/authfs/fd_server/src/main.rs
index f91ebec..47983cb 100644
--- a/authfs/fd_server/src/main.rs
+++ b/authfs/fd_server/src/main.rs
@@ -23,7 +23,6 @@
 //! client can then request the content of file 9 by offset and size.
 
 mod aidl;
-mod fsverity;
 
 use anyhow::{bail, Result};
 use clap::Parser;
diff --git a/authfs/tests/common/src/java/com/android/fs/common/AuthFsTestRule.java b/authfs/tests/common/src/java/com/android/fs/common/AuthFsTestRule.java
index 357edea..7c85797 100644
--- a/authfs/tests/common/src/java/com/android/fs/common/AuthFsTestRule.java
+++ b/authfs/tests/common/src/java/com/android/fs/common/AuthFsTestRule.java
@@ -88,7 +88,7 @@
     private static CommandRunner sAndroid;
     private static CommandRunner sMicrodroid;
 
-    private final ExecutorService mThreadPool = Executors.newCachedThreadPool();
+    private ExecutorService mThreadPool;
 
     public static void setUpAndroid(TestInformation testInfo) throws Exception {
         assertNotNull(testInfo.getDevice());
@@ -242,6 +242,7 @@
     }
 
     public void setUpTest() throws Exception {
+        mThreadPool = Executors.newCachedThreadPool();
         if (sAndroid != null) {
             sAndroid.run("mkdir -p " + TEST_OUTPUT_DIR);
         }
@@ -264,5 +265,10 @@
         archiveLogThenDelete(this, getDevice(), vmRecentLog, "vm_recent.log-" + testName);
 
         sAndroid.run("rm -rf " + TEST_OUTPUT_DIR);
+
+        if (mThreadPool != null) {
+            mThreadPool.shutdownNow();
+            mThreadPool = null;
+        }
     }
 }
diff --git a/compos/composd/Android.bp b/compos/composd/Android.bp
index cee4b01..b0294dd 100644
--- a/compos/composd/Android.bp
+++ b/compos/composd/Android.bp
@@ -16,10 +16,13 @@
         "libbinder_rs",
         "libcompos_common",
         "libcomposd_native_rust",
+        "libfsverity_rs",
         "libminijail_rust",
         "libnix",
         "liblibc",
         "liblog_rust",
+        "libodsign_proto_rust",
+        "libprotobuf",
         "librustutils",
         "libshared_child",
         "libvmclient",
diff --git a/compos/composd/aidl/android/system/composd/ICompilationTaskCallback.aidl b/compos/composd/aidl/android/system/composd/ICompilationTaskCallback.aidl
index 569bba5..a3ce553 100644
--- a/compos/composd/aidl/android/system/composd/ICompilationTaskCallback.aidl
+++ b/compos/composd/aidl/android/system/composd/ICompilationTaskCallback.aidl
@@ -25,6 +25,8 @@
         CompilationFailed,
         /** We ran compilation in the VM, but it reported a problem. */
         UnexpectedCompilationResult,
+        /** We failed to enable fs-verity completely to the output artifacts. */
+        FailedToEnableFsverity,
     }
 
     /**
diff --git a/compos/composd/src/instance_manager.rs b/compos/composd/src/instance_manager.rs
index 2db13c7..98d4a1b 100644
--- a/compos/composd/src/instance_manager.rs
+++ b/compos/composd/src/instance_manager.rs
@@ -27,7 +27,7 @@
 use virtualizationservice::IVirtualizationService::IVirtualizationService;
 
 // Enough memory to complete odrefresh in the VM.
-const VM_MEMORY_MIB: i32 = 1280;
+const VM_MEMORY_MIB: i32 = 1024;
 
 pub struct InstanceManager {
     service: Strong<dyn IVirtualizationService>,
diff --git a/compos/composd/src/odrefresh_task.rs b/compos/composd/src/odrefresh_task.rs
index 3a699ab..a98f50d 100644
--- a/compos/composd/src/odrefresh_task.rs
+++ b/compos/composd/src/odrefresh_task.rs
@@ -28,11 +28,16 @@
     CompilationMode::CompilationMode, ICompOsService, OdrefreshArgs::OdrefreshArgs,
 };
 use compos_common::odrefresh::{
-    is_system_property_interesting, ExitCode, ODREFRESH_OUTPUT_ROOT_DIR,
+    is_system_property_interesting, ExitCode, CURRENT_ARTIFACTS_SUBDIR, ODREFRESH_OUTPUT_ROOT_DIR,
+    PENDING_ARTIFACTS_SUBDIR,
 };
+use compos_common::BUILD_MANIFEST_SYSTEM_EXT_APK_PATH;
 use log::{error, info, warn};
+use odsign_proto::odsign_info::OdsignInfo;
+use protobuf::Message;
 use rustutils::system_properties;
-use std::fs::{remove_dir_all, OpenOptions};
+use std::fs::{remove_dir_all, File, OpenOptions};
+use std::os::fd::AsFd;
 use std::os::unix::fs::OpenOptionsExt;
 use std::os::unix::io::{AsRawFd, OwnedFd};
 use std::path::Path;
@@ -103,8 +108,21 @@
 
                 let result = match exit_code {
                     Ok(ExitCode::CompilationSuccess) => {
-                        info!("CompilationSuccess");
-                        callback.onSuccess()
+                        if compilation_mode == CompilationMode::TEST_COMPILE {
+                            info!("Compilation success");
+                            callback.onSuccess()
+                        } else {
+                            // compos.info is generated only during NORMAL_COMPILE
+                            if let Err(e) = enable_fsverity_to_all() {
+                                let message =
+                                    format!("Unexpected failure when enabling fs-verity: {:?}", e);
+                                error!("{}", message);
+                                callback.onFailure(FailureReason::FailedToEnableFsverity, &message)
+                            } else {
+                                info!("Compilation success, fs-verity enabled");
+                                callback.onSuccess()
+                            }
+                        }
                     }
                     Ok(exit_code) => {
                         let message = format!("Unexpected odrefresh result: {:?}", exit_code);
@@ -161,13 +179,20 @@
     let output_dir_raw_fd = output_dir_fd.as_raw_fd();
     let staging_dir_raw_fd = staging_dir_fd.as_raw_fd();
 
-    // Get the /system_ext FD differently because it may not exist.
-    let (system_ext_dir_raw_fd, ro_dir_fds) =
-        if let Ok(system_ext_dir_fd) = open_dir(Path::new("/system_ext")) {
-            (system_ext_dir_fd.as_raw_fd(), vec![system_dir_fd, system_ext_dir_fd])
-        } else {
-            (-1, vec![system_dir_fd])
-        };
+    // When the VM starts, it starts with or without mouting the extra build manifest APK from
+    // /system_ext. Later on request (here), we need to pass the directory FD of /system_ext, but
+    // only if the VM is configured to need it.
+    //
+    // It is possible to plumb the information from ComposClient to here, but it's extra complexity
+    // and feel slightly weird to encode the VM's state to the task itself, as it is a request to
+    // the VM.
+    let need_system_ext = Path::new(BUILD_MANIFEST_SYSTEM_EXT_APK_PATH).exists();
+    let (system_ext_dir_raw_fd, ro_dir_fds) = if need_system_ext {
+        let system_ext_dir_fd = open_dir(Path::new("/system_ext"))?;
+        (system_ext_dir_fd.as_raw_fd(), vec![system_dir_fd, system_ext_dir_fd])
+    } else {
+        (-1, vec![system_dir_fd])
+    };
 
     // Spawn a fd_server to serve the FDs.
     let fd_server_config = FdServerConfig {
@@ -197,6 +222,31 @@
     ExitCode::from_i32(exit_code.into())
 }
 
+/// Enable fs-verity to output artifacts according to compos.info in the pending directory. Any
+/// error before the completion will just abort, leaving the previous files enabled.
+fn enable_fsverity_to_all() -> Result<()> {
+    let odrefresh_current_dir = Path::new(ODREFRESH_OUTPUT_ROOT_DIR).join(CURRENT_ARTIFACTS_SUBDIR);
+    let pending_dir = Path::new(ODREFRESH_OUTPUT_ROOT_DIR).join(PENDING_ARTIFACTS_SUBDIR);
+    let mut reader =
+        File::open(&pending_dir.join("compos.info")).context("Failed to open compos.info")?;
+    let compos_info = OdsignInfo::parse_from_reader(&mut reader).context("Failed to parse")?;
+
+    for path_str in compos_info.file_hashes.keys() {
+        // Need to rebase the directory on to compos-pending first
+        if let Ok(relpath) = Path::new(path_str).strip_prefix(&odrefresh_current_dir) {
+            let path = pending_dir.join(relpath);
+            let file = File::open(&path).with_context(|| format!("Failed to open {:?}", path))?;
+            // We don't expect error. But when it happens, don't bother handle it here. For
+            // simplicity, just let odsign do the regular check.
+            fsverity::enable(file.as_fd())
+                .with_context(|| format!("Failed to enable fs-verity to {:?}", path))?;
+        } else {
+            warn!("Skip due to unexpected path: {}", path_str);
+        }
+    }
+    Ok(())
+}
+
 /// Returns an `OwnedFD` of the directory.
 fn open_dir(path: &Path) -> Result<OwnedFd> {
     Ok(OwnedFd::from(
diff --git a/compos/service/java/com/android/server/compos/IsolatedCompilationJobService.java b/compos/service/java/com/android/server/compos/IsolatedCompilationJobService.java
index 479ae7f..933ac7a 100644
--- a/compos/service/java/com/android/server/compos/IsolatedCompilationJobService.java
+++ b/compos/service/java/com/android/server/compos/IsolatedCompilationJobService.java
@@ -234,6 +234,10 @@
                     result = IsolatedCompilationMetrics.RESULT_UNEXPECTED_COMPILATION_RESULT;
                     break;
 
+                case ICompilationTaskCallback.FailureReason.FailedToEnableFsverity:
+                    result = IsolatedCompilationMetrics.RESULT_FAILED_TO_ENABLE_FSVERITY;
+                    break;
+
                 default:
                     result = IsolatedCompilationMetrics.RESULT_UNKNOWN_FAILURE;
                     break;
diff --git a/compos/service/java/com/android/server/compos/IsolatedCompilationMetrics.java b/compos/service/java/com/android/server/compos/IsolatedCompilationMetrics.java
index e333198..f7799a4 100644
--- a/compos/service/java/com/android/server/compos/IsolatedCompilationMetrics.java
+++ b/compos/service/java/com/android/server/compos/IsolatedCompilationMetrics.java
@@ -36,9 +36,17 @@
 
     // TODO(b/218525257): Move the definition of these enums to atoms.proto
     @Retention(RetentionPolicy.SOURCE)
-    @IntDef({RESULT_UNKNOWN, RESULT_SUCCESS, RESULT_UNKNOWN_FAILURE, RESULT_FAILED_TO_START,
-            RESULT_JOB_CANCELED, RESULT_COMPILATION_FAILED, RESULT_UNEXPECTED_COMPILATION_RESULT,
-            RESULT_COMPOSD_DIED})
+    @IntDef({
+        RESULT_UNKNOWN,
+        RESULT_SUCCESS,
+        RESULT_UNKNOWN_FAILURE,
+        RESULT_FAILED_TO_START,
+        RESULT_JOB_CANCELED,
+        RESULT_COMPILATION_FAILED,
+        RESULT_UNEXPECTED_COMPILATION_RESULT,
+        RESULT_COMPOSD_DIED,
+        RESULT_FAILED_TO_ENABLE_FSVERITY
+    })
     public @interface CompilationResult {}
 
     // Keep this in sync with Result enum in IsolatedCompilationEnded in
@@ -59,6 +67,9 @@
             .ISOLATED_COMPILATION_ENDED__COMPILATION_RESULT__RESULT_UNEXPECTED_COMPILATION_RESULT;
     public static final int RESULT_COMPOSD_DIED =
             ArtStatsLog.ISOLATED_COMPILATION_ENDED__COMPILATION_RESULT__RESULT_COMPOSD_DIED;
+    public static final int RESULT_FAILED_TO_ENABLE_FSVERITY =
+            ArtStatsLog
+                    .ISOLATED_COMPILATION_ENDED__COMPILATION_RESULT__RESULT_FAILED_TO_ENABLE_FSVERITY;
 
     @Retention(RetentionPolicy.SOURCE)
     @IntDef({SCHEDULING_RESULT_UNKNOWN, SCHEDULING_SUCCESS, SCHEDULING_FAILURE})
diff --git a/docs/debug/tracing.md b/docs/debug/tracing.md
index 7d7ea0c..facd9d0 100644
--- a/docs/debug/tracing.md
+++ b/docs/debug/tracing.md
@@ -16,11 +16,13 @@
 * Only boot clock is supported, and there is no way for user space to change the tracing_clock.
 * Hypervisor tracing periodically polls the data from the hypervisor, this is different from the
   regular ftrace instance which pushes the events into the ring buffer.
+* Resetting ring buffers (by clearing the trace file) is only supported when there are no active
+  readers. If the trace file is cleared while there are active readers, then the ring buffers will
+  be cleared after the last reader disconnects.
+* Changing the size of the ring buffer while the tracing session is active is also not supported.
 
 Note: the list above is not exhaustive.
 
-TODO(b/271412868): add more documentation on the user space interface.
-
 ### Perfetto integration
 
 [Perfetto](https://perfetto.dev/docs/) is an open-source stack for performance instrumentation and
@@ -32,8 +34,15 @@
 Consider first familiarizing yourself with Perfetto documentation for recording traces on Android:
 https://perfetto.dev/docs/quickstart/android-tracing.
 
-So far it is only possible to capture hypervisor trace events by providing the full trace config
-file to Perfetto. Here is the minimal
+The [record_android_trace](
+https://cs.android.com/android/platform/superproject/+/master:external/perfetto/tools/record_android_trace)
+script supports a shortcut to capture all hypervisor events that are  known to Perfetto:
+
+```shell
+external/perfetto/tools/record_android_trace hyp -t 15s -b 32mb -o /tmp/hyp.pftrace
+```
+
+Alternatively you can use full trace config to capture hypervisor. Example usage:
 
 ```shell
 cat<<EOF>config.pbtx
@@ -66,10 +75,120 @@
 
 #### Capturing hypervisor traces on QEMU
 
-TODO(b/271412868): fill in this section
+Perfetto supports capturing traces on Linux: https://perfetto.dev/docs/quickstart/linux-tracing.
+However, since pKVM hypervisor is only supported on arm64, you will need to cross-compile Perfetto
+binaries for linux-arm64 (unless you have an arm64 workstation).
 
-TODO(b/271412868): Stay tuned, more docs coming soon!
+1. Checkout Perfetto repository: https://perfetto.dev/docs/contributing/getting-started
+2. Follow https://perfetto.dev/docs/contributing/build-instructions#cross-compiling-for-linux-arm-64
+  to compile Perfetto binaries for arm64 architecture.
+3. Copy the tracebox binary to QEMU
+4. Run `tracebox` binary on QEMU to capture traces, it's interface is very similar to the
+`record_android_trace` binary. E.g. to capture all hypervisor events run:
+```shell
+tracebox -t 15s -b 32mb hyp
+```
+
+### Analysing traces using SQL
+
+On top of visualisation, Perfetto also provides a SQL interface to analyse traces. More
+documentation is available at https://perfetto.dev/docs/quickstart/trace-analysis and
+https://perfetto.dev/docs/analysis/trace-processor.
+
+Hypervisor events can be queried via `pkvm_hypervisor_events` SQL view. You can load that view by
+calling `SELECT IMPORT("pkvm.hypervisor");`, e.g.:
+
+```sql
+SELECT IMPORT("pkvm.hypervisor");
+SELECT * FROM pkvm_hypervisor_events limit 5;
+```
+
+Below are some SQL queries that might be useful when analysing hypervisor traces.
+
+**What is the longest time CPU spent in hypervisor, grouped by the reason to enter hypervisor**
+```sql
+SELECT IMPORT("pkvm.hypervisor");
+
+SELECT
+  cpu,
+  reason,
+  ts,
+  dur
+FROM pkvm_hypervisor_events
+JOIN (
+  SELECT
+    MAX(dur) as dur2,
+    cpu as cpu2,
+    reason as reason2
+  FROM pkvm_hypervisor_events
+  GROUP BY 2, 3) AS sc
+ON
+  cpu = sc.cpu2
+  AND dur = sc.dur2
+  AND (reason = sc.reason2 OR (reason IS NULL AND sc.reason2 IS NULL))
+ORDER BY dur desc;
+```
+
+**What are the 10 longest times CPU spent in hypervisor because of host_mem_abort**
+```sql
+SELECT
+  hyp.dur as dur,
+  hyp.ts as ts,
+  EXTRACT_ARG(slices.arg_set_id, 'esr') as esr,
+  EXTRACT_ARG(slices.arg_set_id, 'addr') as addr
+FROM pkvm_hypervisor_events as hyp
+JOIN slices
+ON hyp.slice_id = slices.id
+WHERE hyp.reason = 'host_mem_abort'
+ORDER BY dur desc
+LIMIT 10;
+```
 
 ## Microdroid VM tracing
 
+IMPORTANT: Tracing is only supported for debuggable Microdroid VMs.
+
+### Capturing trace in Microdroid
+
+Starting with Android U, Microdroid contains Perfetto tracing binaries, which makes it possible to
+capture traces inside Microdroid VM using Perfetto stack. The commands used to capture traces on
+Android should work for Microdroid VM as well, with a difference that Perfetto's tracing binaries
+are not enabled in Microdroid by default, so you need to manually start them by setting
+`persist.traced.enable` system property to `1`.
+
+Here is a quick example on how trace Microdroid VM:
+
+1. First start your VM. For this example we are going to use
+`adb shell /apex/com.android.virt/bin/vm run-microdroid`.
+
+2. Set up an adb connection with the running VM:
+```shell
+adb shell forward tcp:9876 vsock:${CID}:5555
+adb connect localhost:9876
+adb -s localhost:9876 root
+```
+Where `${CID}` corresponds to the running Microdroid VM that you want to establish adb connection
+with. List of running VMs can be obtained by running `adb shell /apex/com.android.virt/bin/vm list`.
+Alternatively you can use `vm_shell` utility to connect to a running VM, i.e.: `vm_shell connect`.
+
+3. Start Perfetto daemons and capture trace
+```shell
+adb -s localhost:9876 shell setprop persist.traced.enable 1
+${ANDROID_BULD_TOP}/external/perfetto/tools/record_android_trace \
+  -s localhost:9876 \
+  -o /tmp/microdroid-trace-file.pftrace \
+  -t 10s \
+  -b 32mb \
+  sched/sched_switch task/task_newtask sched/sched_process_exit
+```
+
+If you don't have Android repo checked out, then you can download the record_android_trace script by
+following the following [instructions](
+https://perfetto.dev/docs/quickstart/android-tracing#recording-a-trace-through-the-cmdline)
+
+More documentation on Perfetto's tracing on Android is available here:
+https://perfetto.dev/docs/quickstart/android-tracing
+
+### Capturing Microdroid boot trace
+
 TODO(b/271412868): Stay tuned, more docs are coming soon!
diff --git a/libs/fdtpci/src/lib.rs b/libs/fdtpci/src/lib.rs
index e32e16d..96d98d6 100644
--- a/libs/fdtpci/src/lib.rs
+++ b/libs/fdtpci/src/lib.rs
@@ -197,24 +197,32 @@
     Ok(memory_address..memory_address + memory_size)
 }
 
+/// Encodes memory flags of a PCI range
 #[derive(Copy, Clone, Debug, Eq, PartialEq)]
-struct PciMemoryFlags(u32);
+pub struct PciMemoryFlags(pub u32);
 
 impl PciMemoryFlags {
+    /// Returns whether this PCI range is prefetchable
     pub fn prefetchable(self) -> bool {
         self.0 & 0x80000000 != 0
     }
 
+    /// Returns the type of this PCI range
     pub fn range_type(self) -> PciRangeType {
         PciRangeType::from((self.0 & 0x3000000) >> 24)
     }
 }
 
+/// Type of a PCI range
 #[derive(Copy, Clone, Debug, Eq, PartialEq)]
-enum PciRangeType {
+pub enum PciRangeType {
+    /// Range represents the PCI configuration space
     ConfigurationSpace,
+    /// Range is on IO space
     IoSpace,
+    /// Range is on 32-bit MMIO space
     Memory32,
+    /// Range is on 64-bit MMIO space
     Memory64,
 }
 
diff --git a/microdroid/Android.bp b/microdroid/Android.bp
index a2a4138..de06d01 100644
--- a/microdroid/Android.bp
+++ b/microdroid/Android.bp
@@ -70,11 +70,8 @@
         "libartpalette-system",
 
         "apexd.microdroid",
-        "atrace",
         "debuggerd",
         "linker",
-        "tombstoned.microdroid",
-        "tombstone_transmit.microdroid",
         "cgroups.json",
         "task_profiles.json",
         "public.libraries.android.txt",
@@ -89,6 +86,12 @@
         "libvm_payload", // used by payload to interact with microdroid manager
 
         "prng_seeder_microdroid",
+
+        // Binaries required to capture traces in Microdroid.
+        "atrace",
+        "traced",
+        "traced_probes",
+        "perfetto",
     ] + microdroid_shell_and_utilities,
     multilib: {
         common: {
@@ -107,13 +110,26 @@
                 "authfs",
                 "authfs_service",
                 "encryptedstore",
-                "microdroid_crashdump_kernel",
                 "microdroid_kexec",
                 "microdroid_manager",
                 "zipfuse",
             ],
         },
     },
+    arch: {
+        // b/273792258: These could be in multilib.lib64 except that
+        // microdroid_crashdump_kernel doesn't exist for riscv64 yet
+        arm64: {
+            deps: [
+                "microdroid_crashdump_kernel",
+            ],
+        },
+        x86_64: {
+            deps: [
+                "microdroid_crashdump_kernel",
+            ],
+        },
+    },
     linker_config_src: "linker.config.json",
     base_dir: "system",
     dirs: microdroid_rootdirs,
diff --git a/microdroid/README.md b/microdroid/README.md
index 41278a5..28785fd 100644
--- a/microdroid/README.md
+++ b/microdroid/README.md
@@ -138,6 +138,7 @@
 TEST_ROOT=/data/local/tmp/virt
 adb shell /apex/com.android.virt/bin/vm run-app \
 --log $TEST_ROOT/log.txt \
+--console $TEST_ROOT/console.txt \
 PATH_TO_YOUR_APP \
 $TEST_ROOT/MyApp.apk.idsig \
 $TEST_ROOT/instance.img \
@@ -145,9 +146,9 @@
 ```
 
 The last command lets you know the CID assigned to the VM. The console output
-from the VM is stored to `$TEST_ROOT/log.txt` file for debugging purpose. If you
-omit the `--log $TEST_ROOT/log.txt` option, it will be emitted to the current
-console.
+from the VM is stored to `$TEST_ROOT/console.txt` and logcat is stored to
+`$TEST_ROOT/log.txt` file for debugging purpose. If you omit `--log` or
+`--console` option, they will be emitted to the current console.
 
 Stopping the VM can be done as follows:
 
@@ -159,12 +160,50 @@
 invoked with the `--daemonize` flag. If the flag was not used, press Ctrl+C on
 the console where the `vm run-app` command was invoked.
 
-## ADB
+## Debuggable microdroid
 
-On userdebug builds, you can have an adb connection to microdroid. To do so,
-first, delete `$TEST_ROOT/instance.img`; this is because changing debug settings
-requires a new instance. Then add the `--debug=full` flag to the
-`/apex/com.android.virt/bin/vm run-app` command, and then
+### Debugging features
+Microdroid supports following debugging features:
+
+- VM log
+- console output
+- kernel output
+- logcat output
+- [ramdump](../docs/debug/ramdump.md)
+- crashdump
+- [adb](#adb)
+- [gdb](#debugging-the-payload-on-microdroid)
+
+### Enabling debugging features
+There's two ways to enable the debugging features:
+
+#### Option 1) Running microdroid on AVF debug policy configured device
+
+microdroid can be started with debugging features by debug policies from the
+host. Host bootloader may provide debug policies to host OS's device tree for
+VMs.
+
+For protected VM, such device tree will be available in microdroid. microdroid
+can check which debuging features is enabled.
+
+Here are list of device tree properties for debugging features.
+
+- `/avf/guest/common/log`: `<1>` to enable kernel log and logcat. Ignored
+  otherwise.
+- `/avf/guest/common/ramdump`: `<1>` to enable ramdump. Ignored otherwise.
+- `/avf/guest/microdroid/adb`: `<1>` to enable `adb`. Ignored otherwise.
+
+#### Option 2) Lauching microdroid with debug level.
+
+microdroid can be started with debugging features. To do so, first, delete
+`$TEST_ROOT/instance.img`; this is because changing debug settings requires a
+new instance. Then add the `--debug=full` flag to the
+`/apex/com.android.virt/bin/vm run-app` command. This will enable all debugging
+features.
+
+### ADB
+
+If `adb` connection is enabled, launch following command.
 
 ```sh
 vm_shell
@@ -175,7 +214,7 @@
 Once you have an adb connection with `vm_shell`, `localhost:8000` will be the
 serial of microdroid.
 
-## Debugging the payload on microdroid
+### Debugging the payload on microdroid
 
 Like a normal adb device, you can debug native processes using `lldbclient.py`
 script, either by running a new process, or attaching to an existing process.
diff --git a/microdroid/init.rc b/microdroid/init.rc
index 5187a12..29f8970 100644
--- a/microdroid/init.rc
+++ b/microdroid/init.rc
@@ -35,7 +35,10 @@
     restorecon /mnt/extra-apk
 
     # Wait for apexd to finish activating APEXes before starting more processes.
-    wait_for_prop apexd.status activated
+    # Microdroid starts apexd in VM mode in which apexd doesn't wait for init after setting
+    # apexd.status to activated, but immediately transitions to ready. Therefore, it's not safe to
+    # wait for the activated status, by the time this line is reached it may be already be ready.
+    wait_for_prop apexd.status ready
     perform_apex_config
 
     # Notify to microdroid_manager that perform_apex_config is done.
@@ -123,14 +126,6 @@
     mkdir /data/vendor_de 0771 root root
     mkdir /data/vendor/hardware 0771 root root
 
-    # Start tombstoned early to be able to store tombstones.
-    # microdroid doesn't have anr, but tombstoned requires it
-    mkdir /data/anr 0775 system system
-    mkdir /data/tombstones 0771 system system
-    mkdir /data/vendor/tombstones 0771 root root
-
-    start tombstoned
-
     # For security reasons, /data/local/tmp should always be empty.
     # Do not place files or directories in /data/local/tmp
     mkdir /data/local 0751 root root
@@ -143,15 +138,6 @@
     # Mark boot completed. This will notify microdroid_manager to run payload.
     setprop dev.bootcomplete 1
 
-on property:tombstone_transmit.start=1
-    mkdir /data/tombstones 0771 system system
-    start tombstone_transmit
-
-service tombstone_transmit /system/bin/tombstone_transmit.microdroid -cid 2 -port 2000 -remove_tombstones_after_transmitting
-    user system
-    group system
-    shutdown critical
-
 service apexd-vm /system/bin/apexd --vm
     user root
     group system
diff --git a/microdroid/init_debug_policy/Android.bp b/microdroid/init_debug_policy/Android.bp
index b56ef79..afc2e73 100644
--- a/microdroid/init_debug_policy/Android.bp
+++ b/microdroid/init_debug_policy/Android.bp
@@ -1,3 +1,7 @@
+package {
+    default_applicable_licenses: ["Android-Apache-2.0"],
+}
+
 rust_binary {
     name: "microdroid_init_debug_policy",
     srcs: ["src/init_debug_policy.rs"],
diff --git a/microdroid/kdump/kexec.c b/microdroid/kdump/kexec.c
index 8d88951..d3e8e02 100644
--- a/microdroid/kdump/kexec.c
+++ b/microdroid/kdump/kexec.c
@@ -23,6 +23,7 @@
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
+#include <sys/stat.h>
 #include <sys/syscall.h>
 #include <sys/types.h>
 #include <unistd.h>
@@ -53,6 +54,20 @@
     if (syscall(SYS_kexec_file_load, open_checked(KERNEL), open_checked(INITRD), cmdline_len,
                 CMDLINE, KEXEC_FILE_ON_CRASH) == -1) {
         fprintf(stderr, "Failed to load panic kernel: %s\n", strerror(errno));
+        if (errno == EADDRNOTAVAIL) {
+            struct stat st;
+            off_t kernel_size = 0;
+            off_t initrd_size = 0;
+
+            if (stat(KERNEL, &st) == 0) {
+                kernel_size = st.st_size;
+            }
+            if (stat(INITRD, &st) == 0) {
+                initrd_size = st.st_size;
+            }
+            fprintf(stderr, "Image size too big? %s:%ld bytes, %s:%ld bytes", KERNEL, kernel_size,
+                    INITRD, initrd_size);
+        }
         return 1;
     }
     return 0;
diff --git a/microdroid_manager/src/main.rs b/microdroid_manager/src/main.rs
index fa96bf4..ffa2e45 100644
--- a/microdroid_manager/src/main.rs
+++ b/microdroid_manager/src/main.rs
@@ -81,7 +81,6 @@
 const ZIPFUSE_BIN: &str = "/system/bin/zipfuse";
 
 const APEX_CONFIG_DONE_PROP: &str = "apex_config.done";
-const TOMBSTONE_TRANSMIT_DONE_PROP: &str = "tombstone_transmit.init_done";
 const DEBUGGABLE_PROP: &str = "ro.boot.microdroid.debuggable";
 
 // SYNC WITH virtualizationservice/src/crosvm.rs
@@ -423,12 +422,11 @@
 
     setup_config_sysprops(&config)?;
 
-    // Start tombstone_transmit if enabled
+    // Set export_tombstones if enabled
     if should_export_tombstones(&config) {
-        system_properties::write("tombstone_transmit.start", "1")
-            .context("set tombstone_transmit.start")?;
-    } else {
-        control_service("stop", "tombstoned")?;
+        // This property is read by tombstone_handler.
+        system_properties::write("microdroid_manager.export_tombstones.enabled", "1")
+            .context("set microdroid_manager.export_tombstones.enabled")?;
     }
 
     // Wait until zipfuse has mounted the APKs so we can access the payload
@@ -448,20 +446,10 @@
     system_properties::write("microdroid_manager.init_done", "1")
         .context("set microdroid_manager.init_done")?;
 
-    // Wait for tombstone_transmit to init
-    if should_export_tombstones(&config) {
-        wait_for_tombstone_transmit_done()?;
-    }
-
     info!("boot completed, time to run payload");
     exec_task(task, service).context("Failed to run payload")
 }
 
-fn control_service(action: &str, service: &str) -> Result<()> {
-    system_properties::write(&format!("ctl.{}", action), service)
-        .with_context(|| format!("Failed to {} {}", action, service))
-}
-
 struct ApkDmverityArgument<'a> {
     apk: &'a str,
     idsig: &'a str,
@@ -733,11 +721,6 @@
     wait_for_property_true(APEX_CONFIG_DONE_PROP).context("Failed waiting for apex config done")
 }
 
-fn wait_for_tombstone_transmit_done() -> Result<()> {
-    wait_for_property_true(TOMBSTONE_TRANSMIT_DONE_PROP)
-        .context("Failed waiting for tombstone transmit done")
-}
-
 fn wait_for_property_true(property_name: &str) -> Result<()> {
     let mut prop = PropertyWatcher::new(property_name)?;
     loop {
diff --git a/pvmfw/README.md b/pvmfw/README.md
index c652f01..04ad8c4 100644
--- a/pvmfw/README.md
+++ b/pvmfw/README.md
@@ -234,3 +234,31 @@
 [dice-dt]: https://www.kernel.org/doc/Documentation/devicetree/bindings/reserved-memory/google%2Copen-dice.yaml
 [Layering]: https://pigweed.googlesource.com/open-dice/+/refs/heads/main/docs/specification.md#layering-details
 [Trusty-BCC]: https://android.googlesource.com/trusty/lib/+/1696be0a8f3a7103/lib/hwbcc/common/swbcc.c#554
+
+#### pVM Device Tree Overlay
+
+Config header can provide a DTBO to be overlaid on top of the baseline device
+tree from crosvm.
+
+The DTBO may contain debug policies as follows.
+
+```
+/ {
+    fragment@avf {
+        target-path = "/";
+
+        __overlay__ {
+            avf {
+                /* your debug policy here */
+            };
+        };
+    };
+}; /* end of avf */
+```
+
+For specifying DTBO, host bootloader should apply the DTBO to both host
+OS's device tree and config header of `pvmfw`. Both `virtualizationmanager` and
+`pvmfw` will prepare for debugging features.
+
+For details about device tree properties for debug policies, see
+[microdroid's debugging policy guide](../microdroid/README.md#option-1-running-microdroid-on-avf-debug-policy-configured-device).
diff --git a/pvmfw/platform.dts b/pvmfw/platform.dts
index 056fa2f..127f69a 100644
--- a/pvmfw/platform.dts
+++ b/pvmfw/platform.dts
@@ -245,4 +245,11 @@
 		clock-names = "apb_pclk";
 		clocks = <&clk>;
 	};
+
+	vmwdt@3000 {
+		compatible = "qemu,vcpu-stall-detector";
+		reg = <0x00 0x3000 0x00 0x1000>;
+		clock-frequency = <10>;
+		timeout-sec = <8>;
+	};
 };
diff --git a/pvmfw/src/crypto.rs b/pvmfw/src/crypto.rs
index 85dc6c9..275de7a 100644
--- a/pvmfw/src/crypto.rs
+++ b/pvmfw/src/crypto.rs
@@ -14,6 +14,8 @@
 
 //! Wrapper around BoringSSL/OpenSSL symbols.
 
+use crate::cstr;
+
 use core::convert::AsRef;
 use core::ffi::{c_char, c_int, CStr};
 use core::fmt;
@@ -81,14 +83,10 @@
 
 impl fmt::Display for Error {
     fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result {
-        let unknown_library = CStr::from_bytes_with_nul(b"{unknown library}\0").unwrap();
-        let unknown_reason = CStr::from_bytes_with_nul(b"{unknown reason}\0").unwrap();
-        let unknown_file = CStr::from_bytes_with_nul(b"??\0").unwrap();
-
         let packed = self.packed_value();
-        let library = self.library_name().unwrap_or(unknown_library).to_str().unwrap();
-        let reason = self.reason().unwrap_or(unknown_reason).to_str().unwrap();
-        let file = self.file.unwrap_or(unknown_file).to_str().unwrap();
+        let library = self.library_name().unwrap_or(cstr!("{unknown library}")).to_str().unwrap();
+        let reason = self.reason().unwrap_or(cstr!("{unknown reason}")).to_str().unwrap();
+        let file = self.file.unwrap_or(cstr!("??")).to_str().unwrap();
         let line = self.line;
 
         write!(f, "{file}:{line}: {library}: {reason} ({packed:#x})")
diff --git a/pvmfw/src/debug_policy.rs b/pvmfw/src/debug_policy.rs
index 23d3e1d..15efa1c 100644
--- a/pvmfw/src/debug_policy.rs
+++ b/pvmfw/src/debug_policy.rs
@@ -14,6 +14,7 @@
 
 //! Support for the debug policy overlay in pvmfw
 
+use crate::cstr;
 use alloc::{vec, vec::Vec};
 use core::ffi::CStr;
 use core::fmt;
@@ -65,11 +66,8 @@
 
 /// Disables ramdump by removing crashkernel from bootargs in /chosen.
 fn disable_ramdump(fdt: &mut libfdt::Fdt) -> Result<(), DebugPolicyError> {
-    let chosen_path = CStr::from_bytes_with_nul(b"/chosen\0").unwrap();
-    let bootargs_name = CStr::from_bytes_with_nul(b"bootargs\0").unwrap();
-
     let chosen = match fdt
-        .node(chosen_path)
+        .node(cstr!("/chosen"))
         .map_err(|e| DebugPolicyError::Fdt("Failed to find /chosen", e))?
     {
         Some(node) => node,
@@ -77,7 +75,7 @@
     };
 
     let bootargs = match chosen
-        .getprop_str(bootargs_name)
+        .getprop_str(cstr!("bootargs"))
         .map_err(|e| DebugPolicyError::Fdt("Failed to find bootargs prop", e))?
     {
         Some(value) if !value.to_bytes().is_empty() => value,
@@ -100,8 +98,8 @@
     new_bootargs.push(b'\0');
 
     // We've checked existence of /chosen node at the beginning.
-    let mut chosen_mut = fdt.node_mut(chosen_path).unwrap().unwrap();
-    chosen_mut.setprop(bootargs_name, new_bootargs.as_slice()).map_err(|e| {
+    let mut chosen_mut = fdt.node_mut(cstr!("/chosen")).unwrap().unwrap();
+    chosen_mut.setprop(cstr!("bootargs"), new_bootargs.as_slice()).map_err(|e| {
         DebugPolicyError::OverlaidFdt("Failed to remove crashkernel. FDT might be corrupted", e)
     })
 }
@@ -109,7 +107,7 @@
 /// Returns true only if fdt has ramdump prop in the /avf/guest/common node with value <1>
 fn is_ramdump_enabled(fdt: &libfdt::Fdt) -> Result<bool, DebugPolicyError> {
     let common = match fdt
-        .node(CStr::from_bytes_with_nul(b"/avf/guest/common\0").unwrap())
+        .node(cstr!("/avf/guest/common"))
         .map_err(|e| DebugPolicyError::DebugPolicyFdt("Failed to find /avf/guest/common node", e))?
     {
         Some(node) => node,
@@ -117,7 +115,7 @@
     };
 
     match common
-        .getprop_u32(CStr::from_bytes_with_nul(b"ramdump\0").unwrap())
+        .getprop_u32(cstr!("ramdump"))
         .map_err(|e| DebugPolicyError::DebugPolicyFdt("Failed to find ramdump prop", e))?
     {
         Some(1) => Ok(true),
@@ -128,11 +126,8 @@
 /// Enables console output by adding kernel.printk.devkmsg and kernel.console to bootargs.
 /// This uses hardcoded console name 'hvc0' and it should be match with microdroid's bootconfig.debuggable.
 fn enable_console_output(fdt: &mut libfdt::Fdt) -> Result<(), DebugPolicyError> {
-    let chosen_path = CStr::from_bytes_with_nul(b"/chosen\0").unwrap();
-    let bootargs_name = CStr::from_bytes_with_nul(b"bootargs\0").unwrap();
-
     let chosen = match fdt
-        .node(chosen_path)
+        .node(cstr!("/chosen"))
         .map_err(|e| DebugPolicyError::Fdt("Failed to find /chosen", e))?
     {
         Some(node) => node,
@@ -140,7 +135,7 @@
     };
 
     let bootargs = match chosen
-        .getprop_str(bootargs_name)
+        .getprop_str(cstr!("bootargs"))
         .map_err(|e| DebugPolicyError::Fdt("Failed to find bootargs prop", e))?
     {
         Some(value) if !value.to_bytes().is_empty() => value,
@@ -154,8 +149,8 @@
     fdt.unpack().map_err(|e| DebugPolicyError::OverlaidFdt("Failed to unpack", e))?;
 
     // We've checked existence of /chosen node at the beginning.
-    let mut chosen_mut = fdt.node_mut(chosen_path).unwrap().unwrap();
-    chosen_mut.setprop(bootargs_name, new_bootargs.as_slice()).map_err(|e| {
+    let mut chosen_mut = fdt.node_mut(cstr!("/chosen")).unwrap().unwrap();
+    chosen_mut.setprop(cstr!("bootargs"), new_bootargs.as_slice()).map_err(|e| {
         DebugPolicyError::OverlaidFdt("Failed to enabled console output. FDT might be corrupted", e)
     })?;
 
@@ -166,7 +161,7 @@
 /// Returns true only if fdt has log prop in the /avf/guest/common node with value <1>
 fn is_console_output_enabled(fdt: &libfdt::Fdt) -> Result<bool, DebugPolicyError> {
     let common = match fdt
-        .node(CStr::from_bytes_with_nul(b"/avf/guest/common\0").unwrap())
+        .node(cstr!("/avf/guest/common"))
         .map_err(|e| DebugPolicyError::DebugPolicyFdt("Failed to find /avf/guest/common node", e))?
     {
         Some(node) => node,
@@ -174,7 +169,7 @@
     };
 
     match common
-        .getprop_u32(CStr::from_bytes_with_nul(b"log\0").unwrap())
+        .getprop_u32(cstr!("log"))
         .map_err(|e| DebugPolicyError::DebugPolicyFdt("Failed to find log prop", e))?
     {
         Some(1) => Ok(true),
diff --git a/pvmfw/src/dice.rs b/pvmfw/src/dice.rs
index 3ceb8ef..bad3453 100644
--- a/pvmfw/src/dice.rs
+++ b/pvmfw/src/dice.rs
@@ -14,6 +14,7 @@
 
 //! Support for DICE derivation and BCC generation.
 
+use crate::cstr;
 use crate::helpers::flushed_zeroize;
 use core::ffi::c_void;
 use core::ffi::CStr;
@@ -60,10 +61,9 @@
         self,
         salt: &[u8; HIDDEN_SIZE],
     ) -> diced_open_dice::Result<InputValues> {
-        let component_name = CStr::from_bytes_with_nul(b"vm_entry\0").unwrap();
         let mut config_descriptor_buffer = [0; 128];
         let config_descriptor_size = bcc_format_config_descriptor(
-            Some(component_name),
+            Some(cstr!("vm_entry")),
             None,  // component_version
             false, // resettable
             &mut config_descriptor_buffer,
diff --git a/pvmfw/src/fdt.rs b/pvmfw/src/fdt.rs
index 793eaac..f56d6e0 100644
--- a/pvmfw/src/fdt.rs
+++ b/pvmfw/src/fdt.rs
@@ -14,18 +14,27 @@
 
 //! High-level FDT functions.
 
+use crate::cstr;
+use crate::helpers::GUEST_PAGE_SIZE;
+use crate::RebootReason;
 use core::ffi::CStr;
+use core::num::NonZeroUsize;
 use core::ops::Range;
+use fdtpci::PciMemoryFlags;
+use fdtpci::PciRangeType;
+use libfdt::AddressRange;
+use libfdt::CellIterator;
 use libfdt::Fdt;
 use libfdt::FdtError;
+use log::error;
+use tinyvec::ArrayVec;
 
 /// Extract from /config the address range containing the pre-loaded kernel.
 pub fn kernel_range(fdt: &libfdt::Fdt) -> libfdt::Result<Option<Range<usize>>> {
-    let config = CStr::from_bytes_with_nul(b"/config\0").unwrap();
-    let addr = CStr::from_bytes_with_nul(b"kernel-address\0").unwrap();
-    let size = CStr::from_bytes_with_nul(b"kernel-size\0").unwrap();
+    let addr = cstr!("kernel-address");
+    let size = cstr!("kernel-size");
 
-    if let Some(config) = fdt.node(config)? {
+    if let Some(config) = fdt.node(cstr!("/config"))? {
         if let (Some(addr), Some(size)) = (config.getprop_u32(addr)?, config.getprop_u32(size)?) {
             let addr = addr as usize;
             let size = size as usize;
@@ -39,8 +48,8 @@
 
 /// Extract from /chosen the address range containing the pre-loaded ramdisk.
 pub fn initrd_range(fdt: &libfdt::Fdt) -> libfdt::Result<Option<Range<usize>>> {
-    let start = CStr::from_bytes_with_nul(b"linux,initrd-start\0").unwrap();
-    let end = CStr::from_bytes_with_nul(b"linux,initrd-end\0").unwrap();
+    let start = cstr!("linux,initrd-start");
+    let end = cstr!("linux,initrd-end");
 
     if let Some(chosen) = fdt.chosen()? {
         if let (Some(start), Some(end)) = (chosen.getprop_u32(start)?, chosen.getprop_u32(end)?) {
@@ -51,6 +60,404 @@
     Ok(None)
 }
 
+/// Read and validate the size and base address of memory, and returns the size
+fn parse_memory_node(fdt: &libfdt::Fdt) -> Result<NonZeroUsize, RebootReason> {
+    let memory_range = fdt
+        .memory()
+        // Actually, these checks are unnecessary because we read /memory node in entry.rs
+        // where the exactly same checks are done. We are repeating the same check just for
+        // extra safety (in case when the code structure changes in the future).
+        .map_err(|e| {
+            error!("Failed to get /memory from the DT: {e}");
+            RebootReason::InvalidFdt
+        })?
+        .ok_or_else(|| {
+            error!("Node /memory was found empty");
+            RebootReason::InvalidFdt
+        })?
+        .next()
+        .ok_or_else(|| {
+            error!("Failed to read memory range from the DT");
+            RebootReason::InvalidFdt
+        })?;
+
+    let base = memory_range.start;
+    if base as u64 != DeviceTreeInfo::RAM_BASE_ADDR {
+        error!("Memory base address {:#x} is not {:#x}", base, DeviceTreeInfo::RAM_BASE_ADDR);
+        return Err(RebootReason::InvalidFdt);
+    }
+
+    let size = memory_range.len(); // end is exclusive
+    if size % GUEST_PAGE_SIZE != 0 {
+        error!("Memory size {:#x} is not a multiple of page size {:#x}", size, GUEST_PAGE_SIZE);
+        return Err(RebootReason::InvalidFdt);
+    }
+    // In the u-boot implementation, we checked if base + size > u64::MAX, but we don't need that
+    // because memory() function uses checked_add when constructing the Range object. If an
+    // overflow happened, we should have gotten None from the next() call above and would have
+    // bailed already.
+
+    NonZeroUsize::new(size).ok_or_else(|| {
+        error!("Memory size can't be 0");
+        RebootReason::InvalidFdt
+    })
+}
+
+/// Read the number of CPUs
+fn parse_cpu_nodes(fdt: &libfdt::Fdt) -> Result<NonZeroUsize, RebootReason> {
+    let num = fdt
+        .compatible_nodes(cstr!("arm,arm-v8"))
+        .map_err(|e| {
+            error!("Failed to read compatible nodes \"arm,arm-v8\" from DT: {e}");
+            RebootReason::InvalidFdt
+        })?
+        .count();
+    NonZeroUsize::new(num).ok_or_else(|| {
+        error!("Number of CPU can't be 0");
+        RebootReason::InvalidFdt
+    })
+}
+
+#[derive(Debug)]
+#[allow(dead_code)] // TODO: remove this
+struct PciInfo {
+    ranges: [Range<u64>; 2],
+    num_irq: usize,
+}
+
+/// Read and validate PCI node
+fn parse_pci_nodes(fdt: &libfdt::Fdt) -> Result<PciInfo, RebootReason> {
+    let node = fdt
+        .compatible_nodes(cstr!("pci-host-cam-generic"))
+        .map_err(|e| {
+            error!("Failed to read compatible node \"pci-host-cam-generic\" from DT: {e}");
+            RebootReason::InvalidFdt
+        })?
+        .next()
+        .ok_or_else(|| {
+            // pvmfw requires at least one pci device (virtio-blk) for the instance disk. So,
+            // let's fail early.
+            error!("Compatible node \"pci-host-cam-generic\" doesn't exist");
+            RebootReason::InvalidFdt
+        })?;
+
+    let mut iter = node
+        .ranges::<(u32, u64), u64, u64>()
+        .map_err(|e| {
+            error!("Failed to read ranges from PCI node: {e}");
+            RebootReason::InvalidFdt
+        })?
+        .ok_or_else(|| {
+            error!("PCI node missing ranges property");
+            RebootReason::InvalidFdt
+        })?;
+
+    let range0 = iter.next().ok_or_else(|| {
+        error!("First range missing in PCI node");
+        RebootReason::InvalidFdt
+    })?;
+    let range0 = get_and_validate_pci_range(&range0)?;
+
+    let range1 = iter.next().ok_or_else(|| {
+        error!("Second range missing in PCI node");
+        RebootReason::InvalidFdt
+    })?;
+    let range1 = get_and_validate_pci_range(&range1)?;
+
+    let num_irq = count_and_validate_pci_irq_masks(&node)?;
+
+    validate_pci_irq_maps(&node)?;
+
+    Ok(PciInfo { ranges: [range0, range1], num_irq })
+}
+
+fn get_and_validate_pci_range(
+    range: &AddressRange<(u32, u64), u64, u64>,
+) -> Result<Range<u64>, RebootReason> {
+    let mem_flags = PciMemoryFlags(range.addr.0);
+    let range_type = mem_flags.range_type();
+    let prefetchable = mem_flags.prefetchable();
+    let bus_addr = range.addr.1;
+    let cpu_addr = range.parent_addr;
+    let size = range.size;
+    if range_type != PciRangeType::Memory64 {
+        error!("Invalid range type {:?} for bus address {:#x} in PCI node", range_type, bus_addr);
+        return Err(RebootReason::InvalidFdt);
+    }
+    if prefetchable {
+        error!("PCI bus address {:#x} in PCI node is prefetchable", bus_addr);
+        return Err(RebootReason::InvalidFdt);
+    }
+    // Enforce ID bus-to-cpu mappings, as used by crosvm.
+    if bus_addr != cpu_addr {
+        error!("PCI bus address: {:#x} is different from CPU address: {:#x}", bus_addr, cpu_addr);
+        return Err(RebootReason::InvalidFdt);
+    }
+    let bus_end = bus_addr.checked_add(size).ok_or_else(|| {
+        error!("PCI address range size {:#x} too big", size);
+        RebootReason::InvalidFdt
+    })?;
+    Ok(bus_addr..bus_end)
+}
+
+/// Iterator that takes N cells as a chunk
+struct CellChunkIterator<'a, const N: usize> {
+    cells: CellIterator<'a>,
+}
+
+impl<'a, const N: usize> CellChunkIterator<'a, N> {
+    fn new(cells: CellIterator<'a>) -> Self {
+        Self { cells }
+    }
+}
+
+impl<'a, const N: usize> Iterator for CellChunkIterator<'a, N> {
+    type Item = [u32; N];
+    fn next(&mut self) -> Option<Self::Item> {
+        let mut ret: Self::Item = [0; N];
+        for i in ret.iter_mut() {
+            *i = self.cells.next()?;
+        }
+        Some(ret)
+    }
+}
+
+fn count_and_validate_pci_irq_masks(pci_node: &libfdt::FdtNode) -> Result<usize, RebootReason> {
+    const IRQ_MASK_CELLS: usize = 4;
+    const IRQ_MASK_ADDR_HI: u32 = 0xf800;
+    const IRQ_MASK_ADDR_ME: u32 = 0x0;
+    const IRQ_MASK_ADDR_LO: u32 = 0x0;
+    const IRQ_MASK_ANY_IRQ: u32 = 0x7;
+    const EXPECTED: [u32; IRQ_MASK_CELLS] =
+        [IRQ_MASK_ADDR_HI, IRQ_MASK_ADDR_ME, IRQ_MASK_ADDR_LO, IRQ_MASK_ANY_IRQ];
+
+    let mut irq_count: usize = 0;
+    for irq_mask in CellChunkIterator::<IRQ_MASK_CELLS>::new(
+        pci_node
+            .getprop_cells(cstr!("interrupt-map-mask"))
+            .map_err(|e| {
+                error!("Failed to read interrupt-map-mask property: {e}");
+                RebootReason::InvalidFdt
+            })?
+            .ok_or_else(|| {
+                error!("PCI node missing interrupt-map-mask property");
+                RebootReason::InvalidFdt
+            })?,
+    ) {
+        if irq_mask != EXPECTED {
+            error!("invalid irq mask {:?}", irq_mask);
+            return Err(RebootReason::InvalidFdt);
+        }
+        irq_count += 1;
+    }
+    Ok(irq_count)
+}
+
+fn validate_pci_irq_maps(pci_node: &libfdt::FdtNode) -> Result<(), RebootReason> {
+    const IRQ_MAP_CELLS: usize = 10;
+    const PCI_DEVICE_IDX: usize = 11;
+    const PCI_IRQ_ADDR_ME: u32 = 0;
+    const PCI_IRQ_ADDR_LO: u32 = 0;
+    const PCI_IRQ_INTC: u32 = 1;
+    const AARCH64_IRQ_BASE: u32 = 4; // from external/crosvm/aarch64/src/lib.rs
+    const GIC_SPI: u32 = 0;
+    const IRQ_TYPE_LEVEL_HIGH: u32 = 4;
+
+    let mut phys_hi: u32 = 0;
+    let mut irq_nr = AARCH64_IRQ_BASE;
+
+    for irq_map in CellChunkIterator::<IRQ_MAP_CELLS>::new(
+        pci_node
+            .getprop_cells(cstr!("interrupt-map"))
+            .map_err(|e| {
+                error!("Failed to read interrupt-map property: {e}");
+                RebootReason::InvalidFdt
+            })?
+            .ok_or_else(|| {
+                error!("PCI node missing interrupt-map property");
+                RebootReason::InvalidFdt
+            })?,
+    ) {
+        phys_hi += 0x1 << PCI_DEVICE_IDX;
+
+        let pci_addr = (irq_map[0], irq_map[1], irq_map[2]);
+        let pci_irq_number = irq_map[3];
+        let _controller_phandle = irq_map[4]; // skipped.
+        let gic_addr = (irq_map[5], irq_map[6]); // address-cells is <2> for GIC
+                                                 // interrupt-cells is <3> for GIC
+        let gic_peripheral_interrupt_type = irq_map[7];
+        let gic_irq_number = irq_map[8];
+        let gic_irq_type = irq_map[9];
+
+        let expected_pci_addr = (phys_hi, PCI_IRQ_ADDR_ME, PCI_IRQ_ADDR_LO);
+
+        if pci_addr != expected_pci_addr {
+            error!("PCI device address {:#x} {:#x} {:#x} in interrupt-map is different from expected address \
+                   {:#x} {:#x} {:#x}",
+                   pci_addr.0, pci_addr.1, pci_addr.2, expected_pci_addr.0, expected_pci_addr.1, expected_pci_addr.2);
+            return Err(RebootReason::InvalidFdt);
+        }
+        if pci_irq_number != PCI_IRQ_INTC {
+            error!(
+                "PCI INT# {:#x} in interrupt-map is different from expected value {:#x}",
+                pci_irq_number, PCI_IRQ_INTC
+            );
+            return Err(RebootReason::InvalidFdt);
+        }
+        if gic_addr != (0, 0) {
+            error!(
+                "GIC address {:#x} {:#x} in interrupt-map is different from expected address \
+                   {:#x} {:#x}",
+                gic_addr.0, gic_addr.1, 0, 0
+            );
+            return Err(RebootReason::InvalidFdt);
+        }
+        if gic_peripheral_interrupt_type != GIC_SPI {
+            error!("GIC peripheral interrupt type {:#x} in interrupt-map is different from expected value \
+                   {:#x}", gic_peripheral_interrupt_type, GIC_SPI);
+            return Err(RebootReason::InvalidFdt);
+        }
+        if gic_irq_number != irq_nr {
+            error!(
+                "GIC irq number {:#x} in interrupt-map is unexpected. Expected {:#x}",
+                gic_irq_number, irq_nr
+            );
+            return Err(RebootReason::InvalidFdt);
+        }
+        irq_nr += 1; // move to next irq
+        if gic_irq_type != IRQ_TYPE_LEVEL_HIGH {
+            error!(
+                "IRQ type in {:#x} is invalid. Must be LEVEL_HIGH {:#x}",
+                gic_irq_type, IRQ_TYPE_LEVEL_HIGH
+            );
+            return Err(RebootReason::InvalidFdt);
+        }
+    }
+    Ok(())
+}
+
+#[derive(Default, Debug)]
+#[allow(dead_code)] // TODO: remove this
+pub struct SerialInfo {
+    addrs: ArrayVec<[u64; Self::SERIAL_MAX_COUNT]>,
+}
+
+impl SerialInfo {
+    const SERIAL_MAX_COUNT: usize = 4;
+}
+
+fn parse_serial_nodes(fdt: &libfdt::Fdt) -> Result<SerialInfo, RebootReason> {
+    let mut ret: SerialInfo = Default::default();
+    for (i, node) in fdt
+        .compatible_nodes(cstr!("ns16550a"))
+        .map_err(|e| {
+            error!("Failed to read compatible nodes \"ns16550a\" from DT: {e}");
+            RebootReason::InvalidFdt
+        })?
+        .enumerate()
+    {
+        if i >= ret.addrs.capacity() {
+            error!("Too many serials: {i}");
+            return Err(RebootReason::InvalidFdt);
+        }
+        let reg = node
+            .reg()
+            .map_err(|e| {
+                error!("Failed to read reg property from \"ns16550a\" node: {e}");
+                RebootReason::InvalidFdt
+            })?
+            .ok_or_else(|| {
+                error!("No reg property in \"ns16550a\" node");
+                RebootReason::InvalidFdt
+            })?
+            .next()
+            .ok_or_else(|| {
+                error!("No value in reg property of \"ns16550a\" node");
+                RebootReason::InvalidFdt
+            })?;
+        ret.addrs.push(reg.addr);
+    }
+    Ok(ret)
+}
+
+#[derive(Debug)]
+#[allow(dead_code)] // TODO: remove this
+pub struct SwiotlbInfo {
+    size: u64,
+    align: u64,
+}
+
+fn parse_swiotlb_nodes(fdt: &libfdt::Fdt) -> Result<SwiotlbInfo, RebootReason> {
+    let node = fdt
+        .compatible_nodes(cstr!("restricted-dma-pool"))
+        .map_err(|e| {
+            error!("Failed to read compatible nodes \"restricted-dma-pool\" from DT: {e}");
+            RebootReason::InvalidFdt
+        })?
+        .next()
+        .ok_or_else(|| {
+            error!("No compatible node \"restricted-dma-pool\" in DT");
+            RebootReason::InvalidFdt
+        })?;
+    let size = node
+        .getprop_u64(cstr!("size"))
+        .map_err(|e| {
+            error!("Failed to read \"size\" property of \"restricted-dma-pool\": {e}");
+            RebootReason::InvalidFdt
+        })?
+        .ok_or_else(|| {
+            error!("No \"size\" property in \"restricted-dma-pool\"");
+            RebootReason::InvalidFdt
+        })?;
+
+    let align = node
+        .getprop_u64(cstr!("alignment"))
+        .map_err(|e| {
+            error!("Failed to read \"alignment\" property of \"restricted-dma-pool\": {e}");
+            RebootReason::InvalidFdt
+        })?
+        .ok_or_else(|| {
+            error!("No \"alignment\" property in \"restricted-dma-pool\"");
+            RebootReason::InvalidFdt
+        })?;
+
+    if size == 0 || (size % GUEST_PAGE_SIZE as u64) != 0 {
+        error!("Invalid swiotlb size {:#x}", size);
+        return Err(RebootReason::InvalidFdt);
+    }
+
+    if (align % GUEST_PAGE_SIZE as u64) != 0 {
+        error!("Invalid swiotlb alignment {:#x}", align);
+        return Err(RebootReason::InvalidFdt);
+    }
+
+    Ok(SwiotlbInfo { size, align })
+}
+
+#[derive(Debug)]
+#[allow(dead_code)] // TODO: remove this
+pub struct DeviceTreeInfo {
+    memory_size: NonZeroUsize,
+    num_cpu: NonZeroUsize,
+    pci_info: PciInfo,
+    serial_info: SerialInfo,
+    swiotlb_info: SwiotlbInfo,
+}
+
+impl DeviceTreeInfo {
+    const RAM_BASE_ADDR: u64 = 0x8000_0000;
+}
+
+pub fn parse_device_tree(fdt: &libfdt::Fdt) -> Result<DeviceTreeInfo, RebootReason> {
+    Ok(DeviceTreeInfo {
+        memory_size: parse_memory_node(fdt)?,
+        num_cpu: parse_cpu_nodes(fdt)?,
+        pci_info: parse_pci_nodes(fdt)?,
+        serial_info: parse_serial_nodes(fdt)?,
+        swiotlb_info: parse_swiotlb_nodes(fdt)?,
+    })
+}
+
 /// Modifies the input DT according to the fields of the configuration.
 pub fn modify_for_next_stage(
     fdt: &mut Fdt,
@@ -62,16 +469,8 @@
 
     add_dice_node(fdt, bcc.as_ptr() as usize, bcc.len())?;
 
-    set_or_clear_chosen_flag(
-        fdt,
-        CStr::from_bytes_with_nul(b"avf,strict-boot\0").unwrap(),
-        strict_boot,
-    )?;
-    set_or_clear_chosen_flag(
-        fdt,
-        CStr::from_bytes_with_nul(b"avf,new-instance\0").unwrap(),
-        new_instance,
-    )?;
+    set_or_clear_chosen_flag(fdt, cstr!("avf,strict-boot"), strict_boot)?;
+    set_or_clear_chosen_flag(fdt, cstr!("avf,new-instance"), new_instance)?;
 
     fdt.pack()?;
 
@@ -80,24 +479,20 @@
 
 /// Add a "google,open-dice"-compatible reserved-memory node to the tree.
 fn add_dice_node(fdt: &mut Fdt, addr: usize, size: usize) -> libfdt::Result<()> {
-    let reserved_memory = CStr::from_bytes_with_nul(b"/reserved-memory\0").unwrap();
     // We reject DTs with missing reserved-memory node as validation should have checked that the
     // "swiotlb" subnode (compatible = "restricted-dma-pool") was present.
-    let mut reserved_memory = fdt.node_mut(reserved_memory)?.ok_or(libfdt::FdtError::NotFound)?;
+    let mut reserved_memory =
+        fdt.node_mut(cstr!("/reserved-memory"))?.ok_or(libfdt::FdtError::NotFound)?;
 
-    let dice = CStr::from_bytes_with_nul(b"dice\0").unwrap();
-    let mut dice = reserved_memory.add_subnode(dice)?;
+    let mut dice = reserved_memory.add_subnode(cstr!("dice"))?;
 
-    let compatible = CStr::from_bytes_with_nul(b"compatible\0").unwrap();
-    dice.appendprop(compatible, b"google,open-dice\0")?;
+    dice.appendprop(cstr!("compatible"), b"google,open-dice\0")?;
 
-    let no_map = CStr::from_bytes_with_nul(b"no-map\0").unwrap();
-    dice.appendprop(no_map, &[])?;
+    dice.appendprop(cstr!("no-map"), &[])?;
 
     let addr = addr.try_into().unwrap();
     let size = size.try_into().unwrap();
-    let reg = CStr::from_bytes_with_nul(b"reg\0").unwrap();
-    dice.appendprop_addrrange(reg, addr, size)?;
+    dice.appendprop_addrrange(cstr!("reg"), addr, size)?;
 
     Ok(())
 }
diff --git a/pvmfw/src/heap.rs b/pvmfw/src/heap.rs
index 435a6ff..eea2e98 100644
--- a/pvmfw/src/heap.rs
+++ b/pvmfw/src/heap.rs
@@ -53,7 +53,15 @@
 
 #[no_mangle]
 unsafe extern "C" fn malloc(size: usize) -> *mut c_void {
-    malloc_(size).map_or(ptr::null_mut(), |p| p.cast::<c_void>().as_ptr())
+    malloc_(size, false).map_or(ptr::null_mut(), |p| p.cast::<c_void>().as_ptr())
+}
+
+#[no_mangle]
+unsafe extern "C" fn calloc(nmemb: usize, size: usize) -> *mut c_void {
+    let Some(size) = nmemb.checked_mul(size) else {
+        return ptr::null_mut()
+    };
+    malloc_(size, true).map_or(ptr::null_mut(), |p| p.cast::<c_void>().as_ptr())
 }
 
 #[no_mangle]
@@ -67,9 +75,11 @@
     }
 }
 
-unsafe fn malloc_(size: usize) -> Option<NonNull<usize>> {
+unsafe fn malloc_(size: usize, zeroed: bool) -> Option<NonNull<usize>> {
     let size = NonZeroUsize::new(size)?.checked_add(mem::size_of::<usize>())?;
-    let ptr = HEAP_ALLOCATOR.alloc(malloc_layout(size)?);
+    let layout = malloc_layout(size)?;
+    let ptr =
+        if zeroed { HEAP_ALLOCATOR.alloc_zeroed(layout) } else { HEAP_ALLOCATOR.alloc(layout) };
     let ptr = NonNull::new(ptr)?.cast::<usize>().as_ptr();
     *ptr = size.get();
     NonNull::new(ptr.offset(1))
diff --git a/pvmfw/src/helpers.rs b/pvmfw/src/helpers.rs
index e6e3406..fddd8c3 100644
--- a/pvmfw/src/helpers.rs
+++ b/pvmfw/src/helpers.rs
@@ -113,3 +113,11 @@
     reg.zeroize();
     flush(reg)
 }
+
+/// Create &CStr out of &str literal
+#[macro_export]
+macro_rules! cstr {
+    ($str:literal) => {{
+        CStr::from_bytes_with_nul(concat!($str, "\0").as_bytes()).unwrap()
+    }};
+}
diff --git a/pvmfw/src/main.rs b/pvmfw/src/main.rs
index 577ad6e..e1ecac4 100644
--- a/pvmfw/src/main.rs
+++ b/pvmfw/src/main.rs
@@ -45,6 +45,7 @@
 use crate::dice::PartialInputs;
 use crate::entry::RebootReason;
 use crate::fdt::modify_for_next_stage;
+use crate::fdt::parse_device_tree;
 use crate::helpers::flush;
 use crate::helpers::GUEST_PAGE_SIZE;
 use crate::instance::get_or_generate_instance_salt;
@@ -83,6 +84,11 @@
     })?;
     trace!("BCC: {bcc_handover:x?}");
 
+    // This parsing step includes validation. So this effectively ensures that the DT can't be
+    // abused by the host to attack pvmfw in pci::initialize below.
+    let device_tree_info = parse_device_tree(fdt)?;
+    debug!("Device tree info: {:?}", device_tree_info);
+
     // Set up PCI bus for VirtIO devices.
     let pci_info = PciInfo::from_fdt(fdt).map_err(handle_pci_error)?;
     debug!("PCI: {:#x?}", pci_info);
diff --git a/tests/hostside/helper/java/com/android/microdroid/test/host/MicrodroidHostTestCaseBase.java b/tests/hostside/helper/java/com/android/microdroid/test/host/MicrodroidHostTestCaseBase.java
index 20a6045..a7f7906 100644
--- a/tests/hostside/helper/java/com/android/microdroid/test/host/MicrodroidHostTestCaseBase.java
+++ b/tests/hostside/helper/java/com/android/microdroid/test/host/MicrodroidHostTestCaseBase.java
@@ -67,6 +67,8 @@
 
         // remove any leftover files under test root
         android.tryRun("rm", "-rf", TEST_ROOT + "*");
+
+        android.tryRun("mkdir " + TEST_ROOT);
     }
 
     public static void cleanUpVirtualizationTestSetup(ITestDevice androidDevice)
diff --git a/virtualizationmanager/src/aidl.rs b/virtualizationmanager/src/aidl.rs
index e015d9d..749d75f 100644
--- a/virtualizationmanager/src/aidl.rs
+++ b/virtualizationmanager/src/aidl.rs
@@ -725,10 +725,11 @@
 /// user devices (W^X).
 fn check_label_is_allowed(context: &SeContext) -> Result<()> {
     match context.selinux_type()? {
-        | "system_file" // immutable dm-verity protected partition
         | "apk_data_file" // APKs of an installed app
-        | "staging_data_file" // updated/staged APEX images
         | "shell_data_file" // test files created via adb shell
+        | "staging_data_file" // updated/staged APEX images
+        | "system_file" // immutable dm-verity protected partition
+        | "virtualizationservice_data_file" // files created by VS / VirtMgr
          => Ok(()),
         _ => bail!("Label {} is not allowed", context),
     }
diff --git a/virtualizationmanager/src/crosvm.rs b/virtualizationmanager/src/crosvm.rs
index 9db0971..19f5f01 100644
--- a/virtualizationmanager/src/crosvm.rs
+++ b/virtualizationmanager/src/crosvm.rs
@@ -53,6 +53,7 @@
 use rpcbinder::RpcServer;
 
 /// external/crosvm
+use base::AsRawDescriptor;
 use base::UnixSeqpacketListener;
 use vm_control::{BalloonControlCommand, VmRequest, VmResponse};
 
@@ -823,7 +824,9 @@
 
     let control_server_socket = UnixSeqpacketListener::bind(crosvm_control_socket_path)
         .context("failed to create control server")?;
-    command.arg("--socket").arg(add_preserved_fd(&mut preserved_fds, &control_server_socket));
+    command
+        .arg("--socket")
+        .arg(add_preserved_fd(&mut preserved_fds, &control_server_socket.as_raw_descriptor()));
 
     debug!("Preserving FDs {:?}", preserved_fds);
     command.preserved_fds(preserved_fds);
diff --git a/vmbase/README.md b/vmbase/README.md
index 3554ae6..552ac31 100644
--- a/vmbase/README.md
+++ b/vmbase/README.md
@@ -25,28 +25,18 @@
 ```soong
 rust_ffi_static {
     name: "libvmbase_example",
+    defaults: ["vmbase_ffi_defaults"],
     crate_name: "vmbase_example",
     srcs: ["src/main.rs"],
-    edition: "2021",
-    no_stdlibs: true,
-    stdlibs: [
-        "libcompiler_builtins.rust_sysroot",
-        "libcore.rust_sysroot",
-    ],
     rustlibs: [
         "libvmbase",
     ],
-    enabled: false,
-    target: {
-        android_arm64: {
-            enabled: true,
-        },
-    },
 }
 ```
 
-Note that stdlibs must be explicitly specified, as we don't want the normal set of libraries used
-for a C++ binary intended to run in Android userspace.
+`vmbase_ffi_defaults`, among other things, specifies the stdlibs including the `compiler_builtins`
+and `core` crate. These must be explicitly specified as we don't want the normal set of libraries
+used for a C++ binary intended to run in Android userspace.
 
 ### Entry point
 
@@ -139,30 +129,18 @@
 
 ```soong
 cc_binary {
-    name: "vmbase_example_elf",
-    stem: "vmbase_example",
+    name: "vmbase_example",
+    defaults: ["vmbase_elf_defaults"],
     srcs: [
         "idmap.S",
     ],
     static_libs: [
-        "libvmbase_entry",
         "libvmbase_example",
     ],
-    static_executable: true,
-    nocrt: true,
-    system_shared_libs: ["libc"],
-    stl: "none",
     linker_scripts: [
         "image.ld",
         ":vmbase_sections",
     ],
-    installable: false,
-    enabled: false,
-    target: {
-        android_arm64: {
-            enabled: true,
-        },
-    },
 }
 ```
 
@@ -174,9 +152,9 @@
 
 ```soong
 raw_binary {
-    name: "vmbase_example",
-    src: ":vmbase_example_elf",
+    name: "vmbase_example_bin",
     stem: "vmbase_example.bin",
+    src: ":vmbase_example",
     enabled: false,
     target: {
         android_arm64: {