diff --git a/libs/libvmbase/src/memory.rs b/libs/libvmbase/src/memory.rs
index 8baf6ca..89c4554 100644
--- a/libs/libvmbase/src/memory.rs
+++ b/libs/libvmbase/src/memory.rs
@@ -18,11 +18,13 @@
 mod error;
 mod page_table;
 mod shared;
+mod tracker;
 mod util;
 
 pub use error::MemoryTrackerError;
 pub use page_table::PageTable;
-pub use shared::{MemoryRange, MemoryTracker, MEMORY};
+pub use shared::MemoryRange;
+pub use tracker::{MemoryTracker, MEMORY};
 pub use util::{
     flush, flushed_zeroize, min_dcache_line_size, page_4kb_of, PAGE_SIZE, SIZE_128KB, SIZE_16KB,
     SIZE_2MB, SIZE_4KB, SIZE_4MB, SIZE_64KB,
diff --git a/libs/libvmbase/src/memory/shared.rs b/libs/libvmbase/src/memory/shared.rs
index 22bc281..92dd09e 100644
--- a/libs/libvmbase/src/memory/shared.rs
+++ b/libs/libvmbase/src/memory/shared.rs
@@ -14,37 +14,24 @@
 
 //! Shared memory management.
 
-use super::dbm::{flush_dirty_range, mark_dirty_block, set_dbm_enabled};
 use super::error::MemoryTrackerError;
-use super::page_table::{PageTable, MMIO_LAZY_MAP_FLAG};
 use super::util::virt_to_phys;
-use crate::dsb;
 use crate::hyp::{self, get_mem_sharer, get_mmio_guard};
 use crate::layout;
 use crate::util::unchecked_align_down;
-use crate::util::RangeExt as _;
-use aarch64_paging::paging::{
-    Attributes, Descriptor, MemoryRegion as VaRange, VirtualAddress, PAGE_SIZE,
-};
+use aarch64_paging::paging::{MemoryRegion as VaRange, VirtualAddress, PAGE_SIZE};
 use alloc::alloc::{alloc_zeroed, dealloc, handle_alloc_error};
-use alloc::boxed::Box;
 use alloc::collections::BTreeSet;
 use alloc::vec::Vec;
 use buddy_system_allocator::{FrameAllocator, LockedFrameAllocator};
 use core::alloc::Layout;
 use core::cmp::max;
-use core::mem::size_of;
-use core::num::NonZeroUsize;
 use core::ops::Range;
 use core::ptr::NonNull;
 use core::result;
-use log::{debug, error, trace};
+use log::trace;
 use once_cell::race::OnceBox;
 use spin::mutex::SpinMutex;
-use tinyvec::ArrayVec;
-
-/// A global static variable representing the system memory tracker, protected by a spin mutex.
-pub static MEMORY: SpinMutex<Option<MemoryTracker>> = SpinMutex::new(None);
 
 pub(crate) static SHARED_POOL: OnceBox<LockedFrameAllocator<32>> = OnceBox::new();
 pub(crate) static SHARED_MEMORY: SpinMutex<Option<MemorySharer>> = SpinMutex::new(None);
@@ -52,332 +39,8 @@
 /// Memory range.
 pub type MemoryRange = Range<usize>;
 
-fn get_va_range(range: &MemoryRange) -> VaRange {
-    VaRange::new(range.start, range.end)
-}
-
 type Result<T> = result::Result<T, MemoryTrackerError>;
 
-#[derive(Clone, Copy, Debug, Default, PartialEq)]
-enum MemoryType {
-    #[default]
-    ReadOnly,
-    ReadWrite,
-}
-
-#[derive(Clone, Debug, Default)]
-struct MemoryRegion {
-    range: MemoryRange,
-    mem_type: MemoryType,
-}
-
-/// Tracks non-overlapping slices of main memory.
-pub struct MemoryTracker {
-    total: MemoryRange,
-    page_table: PageTable,
-    regions: ArrayVec<[MemoryRegion; MemoryTracker::CAPACITY]>,
-    mmio_regions: ArrayVec<[MemoryRange; MemoryTracker::MMIO_CAPACITY]>,
-    mmio_range: MemoryRange,
-    payload_range: Option<MemoryRange>,
-    mmio_sharer: MmioSharer,
-}
-
-impl MemoryTracker {
-    const CAPACITY: usize = 5;
-    const MMIO_CAPACITY: usize = 5;
-
-    /// Creates a new instance from an active page table, covering the maximum RAM size.
-    pub fn new(
-        mut page_table: PageTable,
-        total: MemoryRange,
-        mmio_range: MemoryRange,
-        payload_range: Option<Range<VirtualAddress>>,
-    ) -> Self {
-        assert!(
-            !total.overlaps(&mmio_range),
-            "MMIO space should not overlap with the main memory region."
-        );
-
-        // Activate dirty state management first, otherwise we may get permission faults immediately
-        // after activating the new page table. This has no effect before the new page table is
-        // activated because none of the entries in the initial idmap have the DBM flag.
-        set_dbm_enabled(true);
-
-        debug!("Activating dynamic page table...");
-        // SAFETY: page_table duplicates the static mappings for everything that the Rust code is
-        // aware of so activating it shouldn't have any visible effect.
-        unsafe { page_table.activate() }
-        debug!("... Success!");
-
-        Self {
-            total,
-            page_table,
-            regions: ArrayVec::new(),
-            mmio_regions: ArrayVec::new(),
-            mmio_range,
-            payload_range: payload_range.map(|r| r.start.0..r.end.0),
-            mmio_sharer: MmioSharer::new().unwrap(),
-        }
-    }
-
-    /// Resize the total RAM size.
-    ///
-    /// This function fails if it contains regions that are not included within the new size.
-    pub fn shrink(&mut self, range: &MemoryRange) -> Result<()> {
-        if range.start != self.total.start {
-            return Err(MemoryTrackerError::DifferentBaseAddress);
-        }
-        if self.total.end < range.end {
-            return Err(MemoryTrackerError::SizeTooLarge);
-        }
-        if !self.regions.iter().all(|r| r.range.is_within(range)) {
-            return Err(MemoryTrackerError::SizeTooSmall);
-        }
-
-        self.total = range.clone();
-        Ok(())
-    }
-
-    /// Allocate the address range for a const slice; returns None if failed.
-    pub fn alloc_range(&mut self, range: &MemoryRange) -> Result<MemoryRange> {
-        let region = MemoryRegion { range: range.clone(), mem_type: MemoryType::ReadOnly };
-        self.check_allocatable(&region)?;
-        self.page_table.map_rodata(&get_va_range(range)).map_err(|e| {
-            error!("Error during range allocation: {e}");
-            MemoryTrackerError::FailedToMap
-        })?;
-        self.add(region)
-    }
-
-    /// Allocates the address range for a const slice.
-    ///
-    /// # Safety
-    ///
-    /// Callers of this method need to ensure that the `range` is valid for mapping as read-only
-    /// data.
-    pub unsafe fn alloc_range_outside_main_memory(
-        &mut self,
-        range: &MemoryRange,
-    ) -> Result<MemoryRange> {
-        let region = MemoryRegion { range: range.clone(), mem_type: MemoryType::ReadOnly };
-        self.check_no_overlap(&region)?;
-        self.page_table.map_rodata(&get_va_range(range)).map_err(|e| {
-            error!("Error during range allocation: {e}");
-            MemoryTrackerError::FailedToMap
-        })?;
-        self.add(region)
-    }
-
-    /// Allocate the address range for a mutable slice; returns None if failed.
-    pub fn alloc_range_mut(&mut self, range: &MemoryRange) -> Result<MemoryRange> {
-        let region = MemoryRegion { range: range.clone(), mem_type: MemoryType::ReadWrite };
-        self.check_allocatable(&region)?;
-        self.page_table.map_data_dbm(&get_va_range(range)).map_err(|e| {
-            error!("Error during mutable range allocation: {e}");
-            MemoryTrackerError::FailedToMap
-        })?;
-        self.add(region)
-    }
-
-    /// Allocate the address range for a const slice; returns None if failed.
-    pub fn alloc(&mut self, base: usize, size: NonZeroUsize) -> Result<MemoryRange> {
-        self.alloc_range(&(base..(base + size.get())))
-    }
-
-    /// Allocate the address range for a mutable slice; returns None if failed.
-    pub fn alloc_mut(&mut self, base: usize, size: NonZeroUsize) -> Result<MemoryRange> {
-        self.alloc_range_mut(&(base..(base + size.get())))
-    }
-
-    /// Checks that the given range of addresses is within the MMIO region, and then maps it
-    /// appropriately.
-    pub fn map_mmio_range(&mut self, range: MemoryRange) -> Result<()> {
-        if !range.is_within(&self.mmio_range) {
-            return Err(MemoryTrackerError::OutOfRange);
-        }
-        if self.mmio_regions.iter().any(|r| range.overlaps(r)) {
-            return Err(MemoryTrackerError::Overlaps);
-        }
-        if self.mmio_regions.len() == self.mmio_regions.capacity() {
-            return Err(MemoryTrackerError::Full);
-        }
-
-        if get_mmio_guard().is_some() {
-            self.page_table.map_device_lazy(&get_va_range(&range)).map_err(|e| {
-                error!("Error during lazy MMIO device mapping: {e}");
-                MemoryTrackerError::FailedToMap
-            })?;
-        } else {
-            self.page_table.map_device(&get_va_range(&range)).map_err(|e| {
-                error!("Error during MMIO device mapping: {e}");
-                MemoryTrackerError::FailedToMap
-            })?;
-        }
-
-        if self.mmio_regions.try_push(range).is_some() {
-            return Err(MemoryTrackerError::Full);
-        }
-
-        Ok(())
-    }
-
-    /// Checks that the memory region meets the following criteria:
-    /// - It is within the range of the `MemoryTracker`.
-    /// - It does not overlap with any previously allocated regions.
-    /// - The `regions` ArrayVec has sufficient capacity to add it.
-    fn check_allocatable(&self, region: &MemoryRegion) -> Result<()> {
-        if !region.range.is_within(&self.total) {
-            return Err(MemoryTrackerError::OutOfRange);
-        }
-        self.check_no_overlap(region)
-    }
-
-    /// Checks that the given region doesn't overlap with any other previously allocated regions,
-    /// and that the regions ArrayVec has capacity to add it.
-    fn check_no_overlap(&self, region: &MemoryRegion) -> Result<()> {
-        if self.regions.iter().any(|r| region.range.overlaps(&r.range)) {
-            return Err(MemoryTrackerError::Overlaps);
-        }
-        if self.regions.len() == self.regions.capacity() {
-            return Err(MemoryTrackerError::Full);
-        }
-        Ok(())
-    }
-
-    fn add(&mut self, region: MemoryRegion) -> Result<MemoryRange> {
-        if self.regions.try_push(region).is_some() {
-            return Err(MemoryTrackerError::Full);
-        }
-
-        Ok(self.regions.last().unwrap().range.clone())
-    }
-
-    /// Unshares any MMIO region previously shared with the MMIO guard.
-    pub fn unshare_all_mmio(&mut self) -> Result<()> {
-        self.mmio_sharer.unshare_all();
-
-        Ok(())
-    }
-
-    /// Initialize the shared heap to dynamically share memory from the global allocator.
-    pub fn init_dynamic_shared_pool(&mut self, granule: usize) -> Result<()> {
-        const INIT_CAP: usize = 10;
-
-        let previous = SHARED_MEMORY.lock().replace(MemorySharer::new(granule, INIT_CAP));
-        if previous.is_some() {
-            return Err(MemoryTrackerError::SharedMemorySetFailure);
-        }
-
-        SHARED_POOL
-            .set(Box::new(LockedFrameAllocator::new()))
-            .map_err(|_| MemoryTrackerError::SharedPoolSetFailure)?;
-
-        Ok(())
-    }
-
-    /// Initialize the shared heap from a static region of memory.
-    ///
-    /// Some hypervisors such as Gunyah do not support a MemShare API for guest
-    /// to share its memory with host. Instead they allow host to designate part
-    /// of guest memory as "shared" ahead of guest starting its execution. The
-    /// shared memory region is indicated in swiotlb node. On such platforms use
-    /// a separate heap to allocate buffers that can be shared with host.
-    pub fn init_static_shared_pool(&mut self, range: Range<usize>) -> Result<()> {
-        let size = NonZeroUsize::new(range.len()).unwrap();
-        let range = self.alloc_mut(range.start, size)?;
-        let shared_pool = LockedFrameAllocator::<32>::new();
-
-        shared_pool.lock().insert(range);
-
-        SHARED_POOL
-            .set(Box::new(shared_pool))
-            .map_err(|_| MemoryTrackerError::SharedPoolSetFailure)?;
-
-        Ok(())
-    }
-
-    /// Initialize the shared heap to use heap memory directly.
-    ///
-    /// When running on "non-protected" hypervisors which permit host direct accesses to guest
-    /// memory, there is no need to perform any memory sharing and/or allocate buffers from a
-    /// dedicated region so this function instructs the shared pool to use the global allocator.
-    pub fn init_heap_shared_pool(&mut self) -> Result<()> {
-        // As MemorySharer only calls MEM_SHARE methods if the hypervisor supports them, internally
-        // using init_dynamic_shared_pool() on a non-protected platform will make use of the heap
-        // without any actual "dynamic memory sharing" taking place and, as such, the granule may
-        // be set to the one of the global_allocator i.e. a byte.
-        self.init_dynamic_shared_pool(size_of::<u8>())
-    }
-
-    /// Unshares any memory that may have been shared.
-    pub fn unshare_all_memory(&mut self) {
-        drop(SHARED_MEMORY.lock().take());
-    }
-
-    /// Handles translation fault for blocks flagged for lazy MMIO mapping by enabling the page
-    /// table entry and MMIO guard mapping the block. Breaks apart a block entry if required.
-    pub(crate) fn handle_mmio_fault(&mut self, addr: VirtualAddress) -> Result<()> {
-        let shared_range = self.mmio_sharer.share(addr)?;
-        self.map_lazy_mmio_as_valid(&shared_range)?;
-
-        Ok(())
-    }
-
-    /// Modify the PTEs corresponding to a given range from (invalid) "lazy MMIO" to valid MMIO.
-    ///
-    /// Returns an error if any PTE in the range is not an invalid lazy MMIO mapping.
-    fn map_lazy_mmio_as_valid(&mut self, page_range: &VaRange) -> Result<()> {
-        // This must be safe and free from break-before-make (BBM) violations, given that the
-        // initial lazy mapping has the valid bit cleared, and each newly created valid descriptor
-        // created inside the mapping has the same size and alignment.
-        self.page_table
-            .modify_range(page_range, &|_: &VaRange, desc: &mut Descriptor, _: usize| {
-                let flags = desc.flags().expect("Unsupported PTE flags set");
-                if flags.contains(MMIO_LAZY_MAP_FLAG) && !flags.contains(Attributes::VALID) {
-                    desc.modify_flags(Attributes::VALID, Attributes::empty());
-                    Ok(())
-                } else {
-                    Err(())
-                }
-            })
-            .map_err(|_| MemoryTrackerError::InvalidPte)
-    }
-
-    /// Flush all memory regions marked as writable-dirty.
-    fn flush_dirty_pages(&mut self) -> Result<()> {
-        // Collect memory ranges for which dirty state is tracked.
-        let writable_regions =
-            self.regions.iter().filter(|r| r.mem_type == MemoryType::ReadWrite).map(|r| &r.range);
-        // Execute a barrier instruction to ensure all hardware updates to the page table have been
-        // observed before reading PTE flags to determine dirty state.
-        dsb!("ish");
-        // Now flush writable-dirty pages in those regions.
-        for range in writable_regions.chain(self.payload_range.as_ref().into_iter()) {
-            self.page_table
-                .walk_range(&get_va_range(range), &flush_dirty_range)
-                .map_err(|_| MemoryTrackerError::FlushRegionFailed)?;
-        }
-        Ok(())
-    }
-
-    /// Handles permission fault for read-only blocks by setting writable-dirty state.
-    /// In general, this should be called from the exception handler when hardware dirty
-    /// state management is disabled or unavailable.
-    pub(crate) fn handle_permission_fault(&mut self, addr: VirtualAddress) -> Result<()> {
-        self.page_table
-            .modify_range(&(addr..addr + 1).into(), &mark_dirty_block)
-            .map_err(|_| MemoryTrackerError::SetPteDirtyFailed)
-    }
-}
-
-impl Drop for MemoryTracker {
-    fn drop(&mut self) {
-        set_dbm_enabled(false);
-        self.flush_dirty_pages().unwrap();
-        self.unshare_all_memory();
-    }
-}
-
 pub(crate) struct MmioSharer {
     granule: usize,
     frames: BTreeSet<usize>,
diff --git a/libs/libvmbase/src/memory/tracker.rs b/libs/libvmbase/src/memory/tracker.rs
new file mode 100644
index 0000000..acf182f
--- /dev/null
+++ b/libs/libvmbase/src/memory/tracker.rs
@@ -0,0 +1,363 @@
+// Copyright 2024, The Android Open Source Project
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//     http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+//! Memory management.
+
+use super::dbm::{flush_dirty_range, mark_dirty_block, set_dbm_enabled};
+use super::error::MemoryTrackerError;
+use super::page_table::{PageTable, MMIO_LAZY_MAP_FLAG};
+use super::shared::{SHARED_MEMORY, SHARED_POOL};
+use crate::dsb;
+use crate::hyp::get_mmio_guard;
+use crate::memory::shared::{MemoryRange, MemorySharer, MmioSharer};
+use crate::util::RangeExt as _;
+use aarch64_paging::paging::{Attributes, Descriptor, MemoryRegion as VaRange, VirtualAddress};
+use alloc::boxed::Box;
+use buddy_system_allocator::LockedFrameAllocator;
+use core::mem::size_of;
+use core::num::NonZeroUsize;
+use core::ops::Range;
+use core::result;
+use log::{debug, error};
+use spin::mutex::SpinMutex;
+use tinyvec::ArrayVec;
+
+/// A global static variable representing the system memory tracker, protected by a spin mutex.
+pub static MEMORY: SpinMutex<Option<MemoryTracker>> = SpinMutex::new(None);
+
+fn get_va_range(range: &MemoryRange) -> VaRange {
+    VaRange::new(range.start, range.end)
+}
+
+type Result<T> = result::Result<T, MemoryTrackerError>;
+
+#[derive(Clone, Copy, Debug, Default, PartialEq)]
+enum MemoryType {
+    #[default]
+    ReadOnly,
+    ReadWrite,
+}
+
+#[derive(Clone, Debug, Default)]
+struct MemoryRegion {
+    range: MemoryRange,
+    mem_type: MemoryType,
+}
+
+/// Tracks non-overlapping slices of main memory.
+pub struct MemoryTracker {
+    total: MemoryRange,
+    page_table: PageTable,
+    regions: ArrayVec<[MemoryRegion; MemoryTracker::CAPACITY]>,
+    mmio_regions: ArrayVec<[MemoryRange; MemoryTracker::MMIO_CAPACITY]>,
+    mmio_range: MemoryRange,
+    payload_range: Option<MemoryRange>,
+    mmio_sharer: MmioSharer,
+}
+
+impl MemoryTracker {
+    const CAPACITY: usize = 5;
+    const MMIO_CAPACITY: usize = 5;
+
+    /// Creates a new instance from an active page table, covering the maximum RAM size.
+    pub fn new(
+        mut page_table: PageTable,
+        total: MemoryRange,
+        mmio_range: MemoryRange,
+        payload_range: Option<Range<VirtualAddress>>,
+    ) -> Self {
+        assert!(
+            !total.overlaps(&mmio_range),
+            "MMIO space should not overlap with the main memory region."
+        );
+
+        // Activate dirty state management first, otherwise we may get permission faults immediately
+        // after activating the new page table. This has no effect before the new page table is
+        // activated because none of the entries in the initial idmap have the DBM flag.
+        set_dbm_enabled(true);
+
+        debug!("Activating dynamic page table...");
+        // SAFETY: page_table duplicates the static mappings for everything that the Rust code is
+        // aware of so activating it shouldn't have any visible effect.
+        unsafe { page_table.activate() }
+        debug!("... Success!");
+
+        Self {
+            total,
+            page_table,
+            regions: ArrayVec::new(),
+            mmio_regions: ArrayVec::new(),
+            mmio_range,
+            payload_range: payload_range.map(|r| r.start.0..r.end.0),
+            mmio_sharer: MmioSharer::new().unwrap(),
+        }
+    }
+
+    /// Resize the total RAM size.
+    ///
+    /// This function fails if it contains regions that are not included within the new size.
+    pub fn shrink(&mut self, range: &MemoryRange) -> Result<()> {
+        if range.start != self.total.start {
+            return Err(MemoryTrackerError::DifferentBaseAddress);
+        }
+        if self.total.end < range.end {
+            return Err(MemoryTrackerError::SizeTooLarge);
+        }
+        if !self.regions.iter().all(|r| r.range.is_within(range)) {
+            return Err(MemoryTrackerError::SizeTooSmall);
+        }
+
+        self.total = range.clone();
+        Ok(())
+    }
+
+    /// Allocate the address range for a const slice; returns None if failed.
+    pub fn alloc_range(&mut self, range: &MemoryRange) -> Result<MemoryRange> {
+        let region = MemoryRegion { range: range.clone(), mem_type: MemoryType::ReadOnly };
+        self.check_allocatable(&region)?;
+        self.page_table.map_rodata(&get_va_range(range)).map_err(|e| {
+            error!("Error during range allocation: {e}");
+            MemoryTrackerError::FailedToMap
+        })?;
+        self.add(region)
+    }
+
+    /// Allocates the address range for a const slice.
+    ///
+    /// # Safety
+    ///
+    /// Callers of this method need to ensure that the `range` is valid for mapping as read-only
+    /// data.
+    pub unsafe fn alloc_range_outside_main_memory(
+        &mut self,
+        range: &MemoryRange,
+    ) -> Result<MemoryRange> {
+        let region = MemoryRegion { range: range.clone(), mem_type: MemoryType::ReadOnly };
+        self.check_no_overlap(&region)?;
+        self.page_table.map_rodata(&get_va_range(range)).map_err(|e| {
+            error!("Error during range allocation: {e}");
+            MemoryTrackerError::FailedToMap
+        })?;
+        self.add(region)
+    }
+
+    /// Allocate the address range for a mutable slice; returns None if failed.
+    pub fn alloc_range_mut(&mut self, range: &MemoryRange) -> Result<MemoryRange> {
+        let region = MemoryRegion { range: range.clone(), mem_type: MemoryType::ReadWrite };
+        self.check_allocatable(&region)?;
+        self.page_table.map_data_dbm(&get_va_range(range)).map_err(|e| {
+            error!("Error during mutable range allocation: {e}");
+            MemoryTrackerError::FailedToMap
+        })?;
+        self.add(region)
+    }
+
+    /// Allocate the address range for a const slice; returns None if failed.
+    pub fn alloc(&mut self, base: usize, size: NonZeroUsize) -> Result<MemoryRange> {
+        self.alloc_range(&(base..(base + size.get())))
+    }
+
+    /// Allocate the address range for a mutable slice; returns None if failed.
+    pub fn alloc_mut(&mut self, base: usize, size: NonZeroUsize) -> Result<MemoryRange> {
+        self.alloc_range_mut(&(base..(base + size.get())))
+    }
+
+    /// Checks that the given range of addresses is within the MMIO region, and then maps it
+    /// appropriately.
+    pub fn map_mmio_range(&mut self, range: MemoryRange) -> Result<()> {
+        if !range.is_within(&self.mmio_range) {
+            return Err(MemoryTrackerError::OutOfRange);
+        }
+        if self.mmio_regions.iter().any(|r| range.overlaps(r)) {
+            return Err(MemoryTrackerError::Overlaps);
+        }
+        if self.mmio_regions.len() == self.mmio_regions.capacity() {
+            return Err(MemoryTrackerError::Full);
+        }
+
+        if get_mmio_guard().is_some() {
+            self.page_table.map_device_lazy(&get_va_range(&range)).map_err(|e| {
+                error!("Error during lazy MMIO device mapping: {e}");
+                MemoryTrackerError::FailedToMap
+            })?;
+        } else {
+            self.page_table.map_device(&get_va_range(&range)).map_err(|e| {
+                error!("Error during MMIO device mapping: {e}");
+                MemoryTrackerError::FailedToMap
+            })?;
+        }
+
+        if self.mmio_regions.try_push(range).is_some() {
+            return Err(MemoryTrackerError::Full);
+        }
+
+        Ok(())
+    }
+
+    /// Checks that the memory region meets the following criteria:
+    /// - It is within the range of the `MemoryTracker`.
+    /// - It does not overlap with any previously allocated regions.
+    /// - The `regions` ArrayVec has sufficient capacity to add it.
+    fn check_allocatable(&self, region: &MemoryRegion) -> Result<()> {
+        if !region.range.is_within(&self.total) {
+            return Err(MemoryTrackerError::OutOfRange);
+        }
+        self.check_no_overlap(region)
+    }
+
+    /// Checks that the given region doesn't overlap with any other previously allocated regions,
+    /// and that the regions ArrayVec has capacity to add it.
+    fn check_no_overlap(&self, region: &MemoryRegion) -> Result<()> {
+        if self.regions.iter().any(|r| region.range.overlaps(&r.range)) {
+            return Err(MemoryTrackerError::Overlaps);
+        }
+        if self.regions.len() == self.regions.capacity() {
+            return Err(MemoryTrackerError::Full);
+        }
+        Ok(())
+    }
+
+    fn add(&mut self, region: MemoryRegion) -> Result<MemoryRange> {
+        if self.regions.try_push(region).is_some() {
+            return Err(MemoryTrackerError::Full);
+        }
+
+        Ok(self.regions.last().unwrap().range.clone())
+    }
+
+    /// Unshares any MMIO region previously shared with the MMIO guard.
+    pub fn unshare_all_mmio(&mut self) -> Result<()> {
+        self.mmio_sharer.unshare_all();
+
+        Ok(())
+    }
+
+    /// Initialize the shared heap to dynamically share memory from the global allocator.
+    pub fn init_dynamic_shared_pool(&mut self, granule: usize) -> Result<()> {
+        const INIT_CAP: usize = 10;
+
+        let previous = SHARED_MEMORY.lock().replace(MemorySharer::new(granule, INIT_CAP));
+        if previous.is_some() {
+            return Err(MemoryTrackerError::SharedMemorySetFailure);
+        }
+
+        SHARED_POOL
+            .set(Box::new(LockedFrameAllocator::new()))
+            .map_err(|_| MemoryTrackerError::SharedPoolSetFailure)?;
+
+        Ok(())
+    }
+
+    /// Initialize the shared heap from a static region of memory.
+    ///
+    /// Some hypervisors such as Gunyah do not support a MemShare API for guest
+    /// to share its memory with host. Instead they allow host to designate part
+    /// of guest memory as "shared" ahead of guest starting its execution. The
+    /// shared memory region is indicated in swiotlb node. On such platforms use
+    /// a separate heap to allocate buffers that can be shared with host.
+    pub fn init_static_shared_pool(&mut self, range: Range<usize>) -> Result<()> {
+        let size = NonZeroUsize::new(range.len()).unwrap();
+        let range = self.alloc_mut(range.start, size)?;
+        let shared_pool = LockedFrameAllocator::<32>::new();
+
+        shared_pool.lock().insert(range);
+
+        SHARED_POOL
+            .set(Box::new(shared_pool))
+            .map_err(|_| MemoryTrackerError::SharedPoolSetFailure)?;
+
+        Ok(())
+    }
+
+    /// Initialize the shared heap to use heap memory directly.
+    ///
+    /// When running on "non-protected" hypervisors which permit host direct accesses to guest
+    /// memory, there is no need to perform any memory sharing and/or allocate buffers from a
+    /// dedicated region so this function instructs the shared pool to use the global allocator.
+    pub fn init_heap_shared_pool(&mut self) -> Result<()> {
+        // As MemorySharer only calls MEM_SHARE methods if the hypervisor supports them, internally
+        // using init_dynamic_shared_pool() on a non-protected platform will make use of the heap
+        // without any actual "dynamic memory sharing" taking place and, as such, the granule may
+        // be set to the one of the global_allocator i.e. a byte.
+        self.init_dynamic_shared_pool(size_of::<u8>())
+    }
+
+    /// Unshares any memory that may have been shared.
+    pub fn unshare_all_memory(&mut self) {
+        drop(SHARED_MEMORY.lock().take());
+    }
+
+    /// Handles translation fault for blocks flagged for lazy MMIO mapping by enabling the page
+    /// table entry and MMIO guard mapping the block. Breaks apart a block entry if required.
+    pub(crate) fn handle_mmio_fault(&mut self, addr: VirtualAddress) -> Result<()> {
+        let shared_range = self.mmio_sharer.share(addr)?;
+        self.map_lazy_mmio_as_valid(&shared_range)?;
+
+        Ok(())
+    }
+
+    /// Modify the PTEs corresponding to a given range from (invalid) "lazy MMIO" to valid MMIO.
+    ///
+    /// Returns an error if any PTE in the range is not an invalid lazy MMIO mapping.
+    fn map_lazy_mmio_as_valid(&mut self, page_range: &VaRange) -> Result<()> {
+        // This must be safe and free from break-before-make (BBM) violations, given that the
+        // initial lazy mapping has the valid bit cleared, and each newly created valid descriptor
+        // created inside the mapping has the same size and alignment.
+        self.page_table
+            .modify_range(page_range, &|_: &VaRange, desc: &mut Descriptor, _: usize| {
+                let flags = desc.flags().expect("Unsupported PTE flags set");
+                if flags.contains(MMIO_LAZY_MAP_FLAG) && !flags.contains(Attributes::VALID) {
+                    desc.modify_flags(Attributes::VALID, Attributes::empty());
+                    Ok(())
+                } else {
+                    Err(())
+                }
+            })
+            .map_err(|_| MemoryTrackerError::InvalidPte)
+    }
+
+    /// Flush all memory regions marked as writable-dirty.
+    fn flush_dirty_pages(&mut self) -> Result<()> {
+        // Collect memory ranges for which dirty state is tracked.
+        let writable_regions =
+            self.regions.iter().filter(|r| r.mem_type == MemoryType::ReadWrite).map(|r| &r.range);
+        // Execute a barrier instruction to ensure all hardware updates to the page table have been
+        // observed before reading PTE flags to determine dirty state.
+        dsb!("ish");
+        // Now flush writable-dirty pages in those regions.
+        for range in writable_regions.chain(self.payload_range.as_ref().into_iter()) {
+            self.page_table
+                .walk_range(&get_va_range(range), &flush_dirty_range)
+                .map_err(|_| MemoryTrackerError::FlushRegionFailed)?;
+        }
+        Ok(())
+    }
+
+    /// Handles permission fault for read-only blocks by setting writable-dirty state.
+    /// In general, this should be called from the exception handler when hardware dirty
+    /// state management is disabled or unavailable.
+    pub(crate) fn handle_permission_fault(&mut self, addr: VirtualAddress) -> Result<()> {
+        self.page_table
+            .modify_range(&(addr..addr + 1).into(), &mark_dirty_block)
+            .map_err(|_| MemoryTrackerError::SetPteDirtyFailed)
+    }
+}
+
+impl Drop for MemoryTracker {
+    fn drop(&mut self) {
+        set_dbm_enabled(false);
+        self.flush_dirty_pages().unwrap();
+        self.unshare_all_memory();
+    }
+}