diff --git a/encryptedstore/src/main.rs b/encryptedstore/src/main.rs
index 5f27fd7..9c8311d 100644
--- a/encryptedstore/src/main.rs
+++ b/encryptedstore/src/main.rs
@@ -20,7 +20,8 @@
 
 use anyhow::{ensure, Context, Result};
 use clap::{arg, App};
-use dm::{crypt::CipherType, util};
+use dm::crypt::CipherType;
+use dm::util;
 use log::info;
 use std::ffi::CString;
 use std::fs::{create_dir_all, OpenOptions};
@@ -87,7 +88,6 @@
 fn enable_crypt(data_device: &Path, key: &str, name: &str) -> Result<PathBuf> {
     let dev_size = util::blkgetsize64(data_device)?;
     let key = hex::decode(key).context("Unable to decode hex key")?;
-    ensure!(key.len() == 32, "We need 32 bytes' key for aes-hctr2 cipher for block encryption");
 
     // Create the dm-crypt spec
     let target = dm::crypt::DmCryptTargetBuilder::default()
diff --git a/libs/devicemapper/Android.bp b/libs/devicemapper/Android.bp
index 783fa79..9fa010c 100644
--- a/libs/devicemapper/Android.bp
+++ b/libs/devicemapper/Android.bp
@@ -13,6 +13,7 @@
         "libbitflags",
         "liblibc",
         "libdata_model",
+        "libhex",
         "libnix",
         "libuuid",
     ],
@@ -33,6 +34,7 @@
     defaults: ["libdm_rust.defaults"],
     test_suites: ["general-tests"],
     rustlibs: [
+        "librustutils",
         "libscopeguard",
         "libtempfile",
     ],
diff --git a/libs/devicemapper/src/crypt.rs b/libs/devicemapper/src/crypt.rs
index 75105ce..b2e677a 100644
--- a/libs/devicemapper/src/crypt.rs
+++ b/libs/devicemapper/src/crypt.rs
@@ -17,10 +17,9 @@
 /// `crypt` module implements the "crypt" target in the device mapper framework. Specifically,
 /// it provides `DmCryptTargetBuilder` struct which is used to construct a `DmCryptTarget` struct
 /// which is then given to `DeviceMapper` to create a mapper device.
-use crate::util::*;
 use crate::DmTargetSpec;
 
-use anyhow::{bail, Context, Result};
+use anyhow::{ensure, Context, Result};
 use data_model::DataInit;
 use std::io::Write;
 use std::mem::size_of;
@@ -32,6 +31,7 @@
 // Documentation/admin-guide/device-mapper/dm-crypt.rst
 
 /// Supported ciphers
+#[derive(Clone, Copy, Debug)]
 pub enum CipherType {
     // AES-256-HCTR2 takes a 32-byte key
     AES256HCTR2,
@@ -47,6 +47,17 @@
             CipherType::AES256XTS => "aes-xts-plain64",
         }
     }
+
+    fn get_required_key_size(&self) -> usize {
+        match *self {
+            CipherType::AES256HCTR2 => 32,
+            CipherType::AES256XTS => 64,
+        }
+    }
+
+    fn validata_key_size(&self, key_size: usize) -> bool {
+        key_size == self.get_required_key_size()
+    }
 }
 
 pub struct DmCryptTarget(Box<[u8]>);
@@ -124,8 +135,13 @@
             .to_str()
             .context("data device path is not encoded in utf8")?;
 
-        let key =
-            if let Some(key) = self.key { hexstring_from(key) } else { bail!("key is not set") };
+        ensure!(self.key.is_some(), "key is not set");
+        // Unwrap is safe because we already made sure key.is_some()
+        ensure!(
+            self.cipher.validata_key_size(self.key.unwrap().len()),
+            format!("Invalid key size for cipher:{}", self.cipher.get_kernel_crypto_name())
+        );
+        let key = hex::encode(self.key.unwrap());
 
         // Step2: serialize the information according to the spec, which is ...
         // DmTargetSpec{...}
diff --git a/libs/devicemapper/src/lib.rs b/libs/devicemapper/src/lib.rs
index ebe71e4..9069eb2 100644
--- a/libs/devicemapper/src/lib.rs
+++ b/libs/devicemapper/src/lib.rs
@@ -234,12 +234,28 @@
 #[cfg(test)]
 mod tests {
     use super::*;
-    use crypt::DmCryptTargetBuilder;
+    use crypt::{CipherType, DmCryptTargetBuilder};
+    use rustutils::system_properties;
     use std::fs::{read, File, OpenOptions};
     use std::io::Write;
 
-    const KEY: &[u8; 32] = b"thirtytwobyteslongreallylongword";
-    const DIFFERENT_KEY: &[u8; 32] = b"drowgnolyllaergnolsetybowtytriht";
+    // Just a logical set of keys to make testing easy. This has no real meaning.
+    struct KeySet<'a> {
+        cipher: CipherType,
+        key: &'a [u8],
+        different_key: &'a [u8],
+    }
+
+    const KEY_SET_XTS: KeySet = KeySet {
+        cipher: CipherType::AES256XTS,
+        key: b"sixtyfourbyteslongsentencearerarebutletsgiveitatrycantbethathard",
+        different_key: b"drahtahtebtnacyrtatievigsteltuberareraecnetnesgnolsetybruofytxis",
+    };
+    const KEY_SET_HCTR2: KeySet = KeySet {
+        cipher: CipherType::AES256HCTR2,
+        key: b"thirtytwobyteslongreallylongword",
+        different_key: b"drowgnolyllaergnolsetybowtytriht",
+    };
 
     // Create a file in given temp directory with given size
     fn prepare_tmpfile(test_dir: &Path, filename: &str, sz: u64) -> PathBuf {
@@ -254,14 +270,54 @@
         f.write_all(data).unwrap();
     }
 
+    // TODO(b/250880499): delete_device() doesn't really delete it even without DM_DEFERRED_REMOVE.
+    // Hence, we have to create a new device with a different name for each test. Retrying
+    // the test on same machine without reboot will also fail.
     fn delete_device(dm: &DeviceMapper, name: &str) -> Result<()> {
         dm.delete_device_deferred(name)?;
         wait_for_path_disappears(Path::new(MAPPER_DEV_ROOT).join(name))?;
         Ok(())
     }
 
+    // TODO(b/260692911): Find a better way to skip a test instead of silently passing it.
+    fn is_hctr2_supported() -> bool {
+        // hctr2 is NOT enabled in kernel 5.10 or lower. We run Microdroid tests on kernel versions
+        // 5.10 or above & therefore,  we don't really care to skip test on other versions.
+        if let Some(version) = system_properties::read("ro.kernel.version")
+            .expect("Unable to read system property ro.kernel.version")
+        {
+            version != "5.10"
+        } else {
+            panic!("Could not read property: kernel.version!!");
+        }
+    }
+
     #[test]
-    fn mapping_again_keeps_data() {
+    fn mapping_again_keeps_data_xts() {
+        mapping_again_keeps_data(&KEY_SET_XTS, "name1");
+    }
+
+    #[test]
+    fn mapping_again_keeps_data_hctr2() {
+        if !is_hctr2_supported() {
+            return;
+        }
+        mapping_again_keeps_data(&KEY_SET_HCTR2, "name2");
+    }
+    #[test]
+    fn data_inaccessible_with_diff_key_xts() {
+        data_inaccessible_with_diff_key(&KEY_SET_XTS, "name3");
+    }
+
+    #[test]
+    fn data_inaccessible_with_diff_key_hctr2() {
+        if !is_hctr2_supported() {
+            return;
+        }
+        data_inaccessible_with_diff_key(&KEY_SET_HCTR2, "name4");
+    }
+
+    fn mapping_again_keeps_data(keyset: &KeySet, device: &str) {
         // This test creates 2 different crypt devices using same key backed by same data_device
         // -> Write data on dev1 -> Check the data is visible & same on dev2
         let dm = DeviceMapper::new().unwrap();
@@ -278,28 +334,33 @@
             /*writable*/ true,
         )
         .unwrap();
+        let device_diff = device.to_owned() + "_diff";
+
         scopeguard::defer! {
             loopdevice::detach(&data_device).unwrap();
-            _ = delete_device(&dm, "crypt1");
-            _ = delete_device(&dm, "crypt2");
+            _ = delete_device(&dm, device);
+            _ = delete_device(&dm, &device_diff);
         }
 
-        let target =
-            DmCryptTargetBuilder::default().data_device(&data_device, sz).key(KEY).build().unwrap();
+        let target = DmCryptTargetBuilder::default()
+            .data_device(&data_device, sz)
+            .cipher(keyset.cipher)
+            .key(keyset.key)
+            .build()
+            .unwrap();
 
-        let mut crypt_device = dm.create_crypt_device("crypt1", &target).unwrap();
+        let mut crypt_device = dm.create_crypt_device(device, &target).unwrap();
         write_to_dev(&crypt_device, inputimg);
 
         // Recreate another device using same target spec & check if the content is the same
-        crypt_device = dm.create_crypt_device("crypt2", &target).unwrap();
+        crypt_device = dm.create_crypt_device(&device_diff, &target).unwrap();
 
         let crypt = read(crypt_device).unwrap();
         assert_eq!(inputimg.len(), crypt.len()); // fail early if the size doesn't match
         assert_eq!(inputimg, crypt.as_slice());
     }
 
-    #[test]
-    fn data_inaccessible_with_diff_key() {
+    fn data_inaccessible_with_diff_key(keyset: &KeySet, device: &str) {
         // This test creates 2 different crypt devices using different keys backed
         // by same data_device -> Write data on dev1 -> Check the data is visible but not the same on dev2
         let dm = DeviceMapper::new().unwrap();
@@ -316,26 +377,32 @@
             /*writable*/ true,
         )
         .unwrap();
+        let device_diff = device.to_owned() + "_diff";
         scopeguard::defer! {
             loopdevice::detach(&data_device).unwrap();
-            _ = delete_device(&dm, "crypt3");
-            _ = delete_device(&dm, "crypt4");
+            _ = delete_device(&dm, device);
+            _ = delete_device(&dm, &device_diff);
         }
 
-        let target =
-            DmCryptTargetBuilder::default().data_device(&data_device, sz).key(KEY).build().unwrap();
+        let target = DmCryptTargetBuilder::default()
+            .data_device(&data_device, sz)
+            .cipher(keyset.cipher)
+            .key(keyset.key)
+            .build()
+            .unwrap();
         let target2 = DmCryptTargetBuilder::default()
             .data_device(&data_device, sz)
-            .key(DIFFERENT_KEY)
+            .cipher(keyset.cipher)
+            .key(keyset.different_key)
             .build()
             .unwrap();
 
-        let mut crypt_device = dm.create_crypt_device("crypt3", &target).unwrap();
+        let mut crypt_device = dm.create_crypt_device(device, &target).unwrap();
 
         write_to_dev(&crypt_device, inputimg);
 
         // Recreate the crypt device again diff key & check if the content is changed
-        crypt_device = dm.create_crypt_device("crypt4", &target2).unwrap();
+        crypt_device = dm.create_crypt_device(&device_diff, &target2).unwrap();
         let crypt = read(crypt_device).unwrap();
         assert_ne!(inputimg, crypt.as_slice());
     }