diff --git a/pvmfw/src/heap.rs b/pvmfw/src/heap.rs
index e412f69..acc903a 100644
--- a/pvmfw/src/heap.rs
+++ b/pvmfw/src/heap.rs
@@ -30,7 +30,7 @@
 #[global_allocator]
 static HEAP_ALLOCATOR: LockedHeap<32> = LockedHeap::<32>::new();
 
-static mut HEAP: [u8; 65536] = [0; 65536];
+static mut HEAP: [u8; 131072] = [0; 131072];
 
 pub unsafe fn init() {
     HEAP_ALLOCATOR.lock().init(HEAP.as_mut_ptr() as usize, HEAP.len());
diff --git a/pvmfw/src/main.rs b/pvmfw/src/main.rs
index d0fdd5a..8633595 100644
--- a/pvmfw/src/main.rs
+++ b/pvmfw/src/main.rs
@@ -33,8 +33,8 @@
 mod memory;
 mod mmio_guard;
 mod mmu;
-mod pci;
 mod smccc;
+mod virtio;
 
 use alloc::boxed::Box;
 
@@ -46,7 +46,7 @@
     helpers::flush,
     helpers::GUEST_PAGE_SIZE,
     memory::MemoryTracker,
-    pci::{find_virtio_devices, map_mmio},
+    virtio::pci::{find_virtio_devices, map_mmio},
 };
 use ::dice::bcc;
 use fdtpci::{PciError, PciInfo};
diff --git a/pvmfw/src/memory.rs b/pvmfw/src/memory.rs
index 5e4874f..604aa80 100644
--- a/pvmfw/src/memory.rs
+++ b/pvmfw/src/memory.rs
@@ -14,16 +14,23 @@
 
 //! Low-level allocation and tracking of main memory.
 
-use crate::helpers::{self, align_down, page_4kb_of, SIZE_4KB};
+#![deny(unsafe_op_in_unsafe_fn)]
+
+use crate::helpers::{self, align_down, align_up, page_4kb_of, SIZE_4KB};
 use crate::hvc::{hyp_meminfo, mem_share, mem_unshare};
 use crate::mmio_guard;
 use crate::mmu;
 use crate::smccc;
+use alloc::alloc::alloc_zeroed;
+use alloc::alloc::dealloc;
+use alloc::alloc::handle_alloc_error;
+use core::alloc::Layout;
 use core::cmp::max;
 use core::cmp::min;
 use core::fmt;
 use core::num::NonZeroUsize;
 use core::ops::Range;
+use core::ptr::NonNull;
 use core::result;
 use log::error;
 use tinyvec::ArrayVec;
@@ -272,9 +279,7 @@
 /// Gives the KVM host read, write and execute permissions on the given memory range. If the range
 /// is not aligned with the memory protection granule then it will be extended on either end to
 /// align.
-#[allow(unused)]
-pub fn share_range(range: &MemoryRange) -> smccc::Result<()> {
-    let granule = hyp_meminfo()? as usize;
+fn share_range(range: &MemoryRange, granule: usize) -> smccc::Result<()> {
     for base in (align_down(range.start, granule)
         .expect("Memory protection granule was not a power of two")..range.end)
         .step_by(granule)
@@ -287,9 +292,7 @@
 /// Removes permission from the KVM host to access the given memory range which was previously
 /// shared. If the range is not aligned with the memory protection granule then it will be extended
 /// on either end to align.
-#[allow(unused)]
-pub fn unshare_range(range: &MemoryRange) -> smccc::Result<()> {
-    let granule = hyp_meminfo()? as usize;
+fn unshare_range(range: &MemoryRange, granule: usize) -> smccc::Result<()> {
     for base in (align_down(range.start, granule)
         .expect("Memory protection granule was not a power of two")..range.end)
         .step_by(granule)
@@ -299,7 +302,78 @@
     Ok(())
 }
 
+/// Allocates a memory range of at least the given size from the global allocator, and shares it
+/// with the host. Returns a pointer to the buffer.
+///
+/// It will be aligned to the memory sharing granule size supported by the hypervisor.
+pub fn alloc_shared(size: usize) -> smccc::Result<NonNull<u8>> {
+    let layout = shared_buffer_layout(size)?;
+    let granule = layout.align();
+
+    // Safe because `shared_buffer_layout` panics if the size is 0, so the layout must have a
+    // non-zero size.
+    let buffer = unsafe { alloc_zeroed(layout) };
+
+    // TODO: Use let-else once we have Rust 1.65 in AOSP.
+    let buffer = if let Some(buffer) = NonNull::new(buffer) {
+        buffer
+    } else {
+        handle_alloc_error(layout);
+    };
+
+    let vaddr = buffer.as_ptr() as usize;
+    let paddr = virt_to_phys(vaddr);
+    // If share_range fails then we will leak the allocation, but that seems better than having it
+    // be reused while maybe still partially shared with the host.
+    share_range(&(paddr..paddr + layout.size()), granule)?;
+
+    Ok(buffer)
+}
+
+/// Unshares and deallocates a memory range which was previously allocated by `alloc_shared`.
+///
+/// The size passed in must be the size passed to the original `alloc_shared` call.
+///
+/// # Safety
+///
+/// The memory must have been allocated by `alloc_shared` with the same size, and not yet
+/// deallocated.
+pub unsafe fn dealloc_shared(vaddr: usize, size: usize) -> smccc::Result<()> {
+    let layout = shared_buffer_layout(size)?;
+    let granule = layout.align();
+
+    let paddr = virt_to_phys(vaddr);
+    unshare_range(&(paddr..paddr + layout.size()), granule)?;
+    // Safe because the memory was allocated by `alloc_shared` above using the same allocator, and
+    // the layout is the same as was used then.
+    unsafe { dealloc(vaddr as *mut u8, layout) };
+
+    Ok(())
+}
+
+/// Returns the layout to use for allocating a buffer of at least the given size shared with the
+/// host.
+///
+/// It will be aligned to the memory sharing granule size supported by the hypervisor.
+///
+/// Panics if `size` is 0.
+fn shared_buffer_layout(size: usize) -> smccc::Result<Layout> {
+    assert_ne!(size, 0);
+    let granule = hyp_meminfo()? as usize;
+    let allocated_size =
+        align_up(size, granule).expect("Memory protection granule was not a power of two");
+    Ok(Layout::from_size_align(allocated_size, granule).unwrap())
+}
+
 /// Returns an iterator which yields the base address of each 4 KiB page within the given range.
 fn page_iterator(range: &MemoryRange) -> impl Iterator<Item = usize> {
     (page_4kb_of(range.start)..range.end).step_by(SIZE_4KB)
 }
+
+/// Returns the intermediate physical address corresponding to the given virtual address.
+///
+/// As we use identity mapping for everything, this is just the identity function, but it's useful
+/// to use it to be explicit about where we are converting from virtual to physical address.
+pub fn virt_to_phys(vaddr: usize) -> usize {
+    vaddr
+}
diff --git a/pvmfw/src/virtio.rs b/pvmfw/src/virtio.rs
new file mode 100644
index 0000000..df916bc
--- /dev/null
+++ b/pvmfw/src/virtio.rs
@@ -0,0 +1,18 @@
+// Copyright 2022, The Android Open Source Project
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//     http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+//! Modules for working with VirtIO devices.
+
+mod hal;
+pub mod pci;
diff --git a/pvmfw/src/virtio/hal.rs b/pvmfw/src/virtio/hal.rs
new file mode 100644
index 0000000..c1c8ae6
--- /dev/null
+++ b/pvmfw/src/virtio/hal.rs
@@ -0,0 +1,71 @@
+use crate::memory::{alloc_shared, dealloc_shared, virt_to_phys};
+use core::ptr::{copy_nonoverlapping, NonNull};
+use log::debug;
+use virtio_drivers::{BufferDirection, Hal, PhysAddr, VirtAddr, PAGE_SIZE};
+
+pub struct HalImpl;
+
+impl Hal for HalImpl {
+    fn dma_alloc(pages: usize) -> PhysAddr {
+        debug!("dma_alloc: pages={}", pages);
+        let size = pages * PAGE_SIZE;
+        let vaddr = alloc_shared(size)
+            .expect("Failed to allocate and share VirtIO DMA range with host")
+            .as_ptr() as VirtAddr;
+        virt_to_phys(vaddr)
+    }
+
+    fn dma_dealloc(paddr: PhysAddr, pages: usize) -> i32 {
+        debug!("dma_dealloc: paddr={:#x}, pages={}", paddr, pages);
+        let vaddr = Self::phys_to_virt(paddr);
+        let size = pages * PAGE_SIZE;
+        // Safe because the memory was allocated by `dma_alloc` above using the same allocator, and
+        // the layout is the same as was used then.
+        unsafe {
+            dealloc_shared(vaddr, size).expect("Failed to unshare VirtIO DMA range with host");
+        }
+        0
+    }
+
+    fn phys_to_virt(paddr: PhysAddr) -> VirtAddr {
+        paddr
+    }
+
+    fn share(buffer: NonNull<[u8]>, direction: BufferDirection) -> PhysAddr {
+        let size = buffer.len();
+
+        // TODO: Copy to a pre-shared region rather than allocating and sharing each time.
+        // Allocate a range of pages, copy the buffer if necessary, and share the new range instead.
+        let copy =
+            alloc_shared(size).expect("Failed to allocate and share VirtIO buffer with host");
+        if direction == BufferDirection::DriverToDevice {
+            unsafe {
+                copy_nonoverlapping(buffer.as_ptr() as *mut u8, copy.as_ptr(), size);
+            }
+        }
+        virt_to_phys(copy.as_ptr() as VirtAddr)
+    }
+
+    fn unshare(paddr: PhysAddr, buffer: NonNull<[u8]>, direction: BufferDirection) {
+        let vaddr = Self::phys_to_virt(paddr);
+        let size = buffer.len();
+        if direction == BufferDirection::DeviceToDriver {
+            debug!(
+                "Copying VirtIO buffer back from {:#x} to {:#x}.",
+                paddr,
+                buffer.as_ptr() as *mut u8 as usize
+            );
+            unsafe {
+                copy_nonoverlapping(vaddr as *const u8, buffer.as_ptr() as *mut u8, size);
+            }
+        }
+
+        // Unshare and deallocate the shared copy of the buffer.
+        debug!("Unsharing VirtIO buffer {:#x}", paddr);
+        // Safe because the memory was allocated by `share` using `alloc_shared`, and the size is
+        // the same as was used then.
+        unsafe {
+            dealloc_shared(vaddr, size).expect("Failed to unshare VirtIO buffer with host");
+        }
+    }
+}
diff --git a/pvmfw/src/pci.rs b/pvmfw/src/virtio/pci.rs
similarity index 66%
rename from pvmfw/src/pci.rs
rename to pvmfw/src/virtio/pci.rs
index 2b81772..f9d36c6 100644
--- a/pvmfw/src/pci.rs
+++ b/pvmfw/src/virtio/pci.rs
@@ -14,10 +14,17 @@
 
 //! Functions to scan the PCI bus for VirtIO devices.
 
+use super::hal::HalImpl;
 use crate::{entry::RebootReason, memory::MemoryTracker};
 use fdtpci::{PciError, PciInfo};
-use log::{debug, error};
-use virtio_drivers::transport::pci::{bus::PciRoot, virtio_device_type};
+use log::{debug, error, info};
+use virtio_drivers::{
+    device::blk::VirtIOBlk,
+    transport::{
+        pci::{bus::PciRoot, virtio_device_type, PciTransport},
+        DeviceType, Transport,
+    },
+};
 
 /// Maps the CAM and BAR range in the page table and MMIO guard.
 pub fn map_mmio(pci_info: &PciInfo, memory: &mut MemoryTracker) -> Result<(), RebootReason> {
@@ -46,6 +53,19 @@
         );
         if let Some(virtio_type) = virtio_device_type(&info) {
             debug!("  VirtIO {:?}", virtio_type);
+            let mut transport = PciTransport::new::<HalImpl>(pci_root, device_function).unwrap();
+            info!(
+                "Detected virtio PCI device with device type {:?}, features {:#018x}",
+                transport.device_type(),
+                transport.read_device_features(),
+            );
+            if virtio_type == DeviceType::Block {
+                let mut blk =
+                    VirtIOBlk::<HalImpl, _>::new(transport).expect("failed to create blk driver");
+                info!("Found {} KiB block device.", blk.capacity() * 512 / 1024);
+                let mut data = [0; 512];
+                blk.read_block(0, &mut data).expect("Failed to read block device");
+            }
         }
     }