diff --git a/bpf_progs/bpf_net_helpers.h b/bpf_progs/bpf_net_helpers.h
index 0a31861..f3c7de5 100644
--- a/bpf_progs/bpf_net_helpers.h
+++ b/bpf_progs/bpf_net_helpers.h
@@ -91,14 +91,14 @@
 #define INGRESS ((struct egress_bool){ .egress = false })
 #define EGRESS ((struct egress_bool){ .egress = true })
 
-// constants for passing in to 'bool downstream'
-static const bool UPSTREAM = false;
-static const bool DOWNSTREAM = true;
+struct stream_bool { bool down; };
+#define UPSTREAM ((struct stream_bool){ .down = false })
+#define DOWNSTREAM ((struct stream_bool){ .down = true })
 
 struct rawip_bool { bool rawip; };
 #define ETHER ((struct rawip_bool){ .rawip = false })
 #define RAWIP ((struct rawip_bool){ .rawip = true })
 
-// constants for passing in to 'bool updatetime'
-static const bool NO_UPDATETIME = false;
-static const bool UPDATETIME = true;
+struct updatetime_bool { bool updatetime; };
+#define NO_UPDATETIME ((struct updatetime_bool){ .updatetime = false })
+#define UPDATETIME ((struct updatetime_bool){ .updatetime = true })
diff --git a/bpf_progs/offload.c b/bpf_progs/offload.c
index 3682ac5..35b8eea 100644
--- a/bpf_progs/offload.c
+++ b/bpf_progs/offload.c
@@ -126,7 +126,7 @@
 
 static inline __always_inline int do_forward6(struct __sk_buff* skb,
                                               const struct rawip_bool rawip,
-                                              const bool downstream,
+                                              const struct stream_bool stream,
                                               const struct kver_uint kver) {
     const bool is_ethernet = !rawip.rawip;
 
@@ -188,7 +188,7 @@
         TC_PUNT(NON_GLOBAL_DST);
 
     // In the upstream direction do not forward traffic within the same /64 subnet.
-    if (!downstream && (src32 == dst32) && (ip6->saddr.s6_addr32[1] == ip6->daddr.s6_addr32[1]))
+    if (!stream.down && (src32 == dst32) && (ip6->saddr.s6_addr32[1] == ip6->daddr.s6_addr32[1]))
         TC_PUNT(LOCAL_SRC_DST);
 
     TetherDownstream6Key kd = {
@@ -200,15 +200,15 @@
             .iif = skb->ifindex,
             .src64 = 0,
     };
-    if (is_ethernet) __builtin_memcpy(downstream ? kd.dstMac : ku.dstMac, eth->h_dest, ETH_ALEN);
+    if (is_ethernet) __builtin_memcpy(stream.down ? kd.dstMac : ku.dstMac, eth->h_dest, ETH_ALEN);
 
-    Tether6Value* v = downstream ? bpf_tether_downstream6_map_lookup_elem(&kd)
-                                 : bpf_tether_upstream6_map_lookup_elem(&ku);
+    Tether6Value* v = stream.down ? bpf_tether_downstream6_map_lookup_elem(&kd)
+                                  : bpf_tether_upstream6_map_lookup_elem(&ku);
 
     // If we don't find any offload information then simply let the core stack handle it...
     if (!v) return TC_ACT_PIPE;
 
-    uint32_t stat_and_limit_k = downstream ? skb->ifindex : v->oif;
+    uint32_t stat_and_limit_k = stream.down ? skb->ifindex : v->oif;
 
     TetherStatsValue* stat_v = bpf_tether_stats_map_lookup_elem(&stat_and_limit_k);
 
@@ -253,7 +253,7 @@
         // We do this even if TX interface is RAWIP and thus does not need an ethernet header,
         // because this is easier and the kernel will strip extraneous ethernet header.
         if (bpf_skb_change_head(skb, sizeof(struct ethhdr), /*flags*/ 0)) {
-            __sync_fetch_and_add(downstream ? &stat_v->rxErrors : &stat_v->txErrors, 1);
+            __sync_fetch_and_add(stream.down ? &stat_v->rxErrors : &stat_v->txErrors, 1);
             TC_PUNT(CHANGE_HEAD_FAILED);
         }
 
@@ -265,7 +265,7 @@
 
         // I do not believe this can ever happen, but keep the verifier happy...
         if (data + sizeof(struct ethhdr) + sizeof(*ip6) > data_end) {
-            __sync_fetch_and_add(downstream ? &stat_v->rxErrors : &stat_v->txErrors, 1);
+            __sync_fetch_and_add(stream.down ? &stat_v->rxErrors : &stat_v->txErrors, 1);
             TC_DROP(TOO_SHORT);
         }
     };
@@ -285,8 +285,8 @@
     // (-ENOTSUPP) if it isn't.
     bpf_csum_update(skb, 0xFFFF - ntohs(old_hl) + ntohs(new_hl));
 
-    __sync_fetch_and_add(downstream ? &stat_v->rxPackets : &stat_v->txPackets, packets);
-    __sync_fetch_and_add(downstream ? &stat_v->rxBytes : &stat_v->txBytes, L3_bytes);
+    __sync_fetch_and_add(stream.down ? &stat_v->rxPackets : &stat_v->txPackets, packets);
+    __sync_fetch_and_add(stream.down ? &stat_v->rxBytes : &stat_v->txBytes, L3_bytes);
 
     // Overwrite any mac header with the new one
     // For a rawip tx interface it will simply be a bunch of zeroes and later stripped.
@@ -361,8 +361,8 @@
 static inline __always_inline int do_forward4_bottom(struct __sk_buff* skb,
         const int l2_header_size, void* data, const void* data_end,
         struct ethhdr* eth, struct iphdr* ip, const struct rawip_bool rawip,
-        const bool downstream, const bool updatetime, const bool is_tcp,
-        const struct kver_uint kver) {
+        const struct stream_bool stream, const struct updatetime_bool updatetime,
+        const bool is_tcp, const struct kver_uint kver) {
     const bool is_ethernet = !rawip.rawip;
     struct tcphdr* tcph = is_tcp ? (void*)(ip + 1) : NULL;
     struct udphdr* udph = is_tcp ? NULL : (void*)(ip + 1);
@@ -421,13 +421,13 @@
     };
     if (is_ethernet) __builtin_memcpy(k.dstMac, eth->h_dest, ETH_ALEN);
 
-    Tether4Value* v = downstream ? bpf_tether_downstream4_map_lookup_elem(&k)
-                                 : bpf_tether_upstream4_map_lookup_elem(&k);
+    Tether4Value* v = stream.down ? bpf_tether_downstream4_map_lookup_elem(&k)
+                                  : bpf_tether_upstream4_map_lookup_elem(&k);
 
     // If we don't find any offload information then simply let the core stack handle it...
     if (!v) return TC_ACT_PIPE;
 
-    uint32_t stat_and_limit_k = downstream ? skb->ifindex : v->oif;
+    uint32_t stat_and_limit_k = stream.down ? skb->ifindex : v->oif;
 
     TetherStatsValue* stat_v = bpf_tether_stats_map_lookup_elem(&stat_and_limit_k);
 
@@ -472,7 +472,7 @@
         // We do this even if TX interface is RAWIP and thus does not need an ethernet header,
         // because this is easier and the kernel will strip extraneous ethernet header.
         if (bpf_skb_change_head(skb, sizeof(struct ethhdr), /*flags*/ 0)) {
-            __sync_fetch_and_add(downstream ? &stat_v->rxErrors : &stat_v->txErrors, 1);
+            __sync_fetch_and_add(stream.down ? &stat_v->rxErrors : &stat_v->txErrors, 1);
             TC_PUNT(CHANGE_HEAD_FAILED);
         }
 
@@ -486,7 +486,7 @@
 
         // I do not believe this can ever happen, but keep the verifier happy...
         if (data + sizeof(struct ethhdr) + sizeof(*ip) + (is_tcp ? sizeof(*tcph) : sizeof(*udph)) > data_end) {
-            __sync_fetch_and_add(downstream ? &stat_v->rxErrors : &stat_v->txErrors, 1);
+            __sync_fetch_and_add(stream.down ? &stat_v->rxErrors : &stat_v->txErrors, 1);
             TC_DROP(TOO_SHORT);
         }
     };
@@ -538,10 +538,10 @@
 
     // This requires the bpf_ktime_get_boot_ns() helper which was added in 5.8,
     // and backported to all Android Common Kernel 4.14+ trees.
-    if (updatetime) v->last_used = bpf_ktime_get_boot_ns();
+    if (updatetime.updatetime) v->last_used = bpf_ktime_get_boot_ns();
 
-    __sync_fetch_and_add(downstream ? &stat_v->rxPackets : &stat_v->txPackets, packets);
-    __sync_fetch_and_add(downstream ? &stat_v->rxBytes : &stat_v->txBytes, L3_bytes);
+    __sync_fetch_and_add(stream.down ? &stat_v->rxPackets : &stat_v->txPackets, packets);
+    __sync_fetch_and_add(stream.down ? &stat_v->rxBytes : &stat_v->txBytes, L3_bytes);
 
     // Redirect to forwarded interface.
     //
@@ -554,8 +554,8 @@
 
 static inline __always_inline int do_forward4(struct __sk_buff* skb,
                                               const struct rawip_bool rawip,
-                                              const bool downstream,
-                                              const bool updatetime,
+                                              const struct stream_bool stream,
+                                              const struct updatetime_bool updatetime,
                                               const struct kver_uint kver) {
     const bool is_ethernet = !rawip.rawip;
 
@@ -616,16 +616,16 @@
     // in such a situation we can only support TCP.  This also has the added nice benefit of
     // using a separate error counter, and thus making it obvious which version of the program
     // is loaded.
-    if (!updatetime && ip->protocol != IPPROTO_TCP) TC_PUNT(NON_TCP);
+    if (!updatetime.updatetime && ip->protocol != IPPROTO_TCP) TC_PUNT(NON_TCP);
 
     // We do not support offloading anything besides IPv4 TCP and UDP, due to need for NAT,
     // but no need to check this if !updatetime due to check immediately above.
-    if (updatetime && (ip->protocol != IPPROTO_TCP) && (ip->protocol != IPPROTO_UDP))
+    if (updatetime.updatetime && (ip->protocol != IPPROTO_TCP) && (ip->protocol != IPPROTO_UDP))
         TC_PUNT(NON_TCP_UDP);
 
     // We want to make sure that the compiler will, in the !updatetime case, entirely optimize
     // out all the non-tcp logic.  Also note that at this point is_udp === !is_tcp.
-    const bool is_tcp = !updatetime || (ip->protocol == IPPROTO_TCP);
+    const bool is_tcp = !updatetime.updatetime || (ip->protocol == IPPROTO_TCP);
 
     // This is a bit of a hack to make things easier on the bpf verifier.
     // (In particular I believe the Linux 4.14 kernel's verifier can get confused later on about
@@ -646,10 +646,10 @@
     // if the underlying requisite kernel support (bpf_ktime_get_boot_ns) was backported.
     if (is_tcp) {
       return do_forward4_bottom(skb, l2_header_size, data, data_end, eth, ip,
-                                rawip, downstream, updatetime, /* is_tcp */ true, kver);
+                                rawip, stream, updatetime, /* is_tcp */ true, kver);
     } else {
       return do_forward4_bottom(skb, l2_header_size, data, data_end, eth, ip,
-                                rawip, downstream, updatetime, /* is_tcp */ false, kver);
+                                rawip, stream, updatetime, /* is_tcp */ false, kver);
     }
 }
 
@@ -808,16 +808,17 @@
 DEFINE_BPF_MAP_GRW(tether_dev_map, DEVMAP_HASH, uint32_t, uint32_t, 64, TETHERING_GID)
 
 static inline __always_inline int do_xdp_forward6(struct xdp_md *ctx, const struct rawip_bool rawip,
-        const bool downstream) {
+        const struct stream_bool stream) {
     return XDP_PASS;
 }
 
 static inline __always_inline int do_xdp_forward4(struct xdp_md *ctx, const struct rawip_bool rawip,
-        const bool downstream) {
+        const struct stream_bool stream) {
     return XDP_PASS;
 }
 
-static inline __always_inline int do_xdp_forward_ether(struct xdp_md *ctx, const bool downstream) {
+static inline __always_inline int do_xdp_forward_ether(struct xdp_md *ctx,
+                                                       const struct stream_bool stream) {
     const void* data = (void*)(long)ctx->data;
     const void* data_end = (void*)(long)ctx->data_end;
     const struct ethhdr* eth = data;
@@ -826,15 +827,16 @@
     if ((void*)(eth + 1) > data_end) return XDP_PASS;
 
     if (eth->h_proto == htons(ETH_P_IPV6))
-        return do_xdp_forward6(ctx, ETHER, downstream);
+        return do_xdp_forward6(ctx, ETHER, stream);
     if (eth->h_proto == htons(ETH_P_IP))
-        return do_xdp_forward4(ctx, ETHER, downstream);
+        return do_xdp_forward4(ctx, ETHER, stream);
 
     // Anything else we don't know how to handle...
     return XDP_PASS;
 }
 
-static inline __always_inline int do_xdp_forward_rawip(struct xdp_md *ctx, const bool downstream) {
+static inline __always_inline int do_xdp_forward_rawip(struct xdp_md *ctx,
+                                                       const struct stream_bool stream) {
     const void* data = (void*)(long)ctx->data;
     const void* data_end = (void*)(long)ctx->data_end;
 
@@ -842,8 +844,8 @@
     if (data_end - data < 1) return XDP_PASS;
     const uint8_t v = (*(uint8_t*)data) >> 4;
 
-    if (v == 6) return do_xdp_forward6(ctx, RAWIP, downstream);
-    if (v == 4) return do_xdp_forward4(ctx, RAWIP, downstream);
+    if (v == 6) return do_xdp_forward6(ctx, RAWIP, stream);
+    if (v == 4) return do_xdp_forward4(ctx, RAWIP, stream);
 
     // Anything else we don't know how to handle...
     return XDP_PASS;
diff --git a/netbpfload/Android.bp b/netbpfload/Android.bp
index cc4f5d0..d4e7ba8 100644
--- a/netbpfload/Android.bp
+++ b/netbpfload/Android.bp
@@ -36,6 +36,4 @@
         "loader.cpp",
         "NetBpfLoad.cpp",
     ],
-
-    init_rc: ["netbpfload.rc"],
 }
diff --git a/netbpfload/NetBpfLoad.cpp b/netbpfload/NetBpfLoad.cpp
index 7d9c48e..b44a0bc 100644
--- a/netbpfload/NetBpfLoad.cpp
+++ b/netbpfload/NetBpfLoad.cpp
@@ -65,46 +65,34 @@
     abort();  // can only hit this if permissions (likely selinux) are screwed up
 }
 
-constexpr unsigned long long kTetheringApexDomainBitmask =
-        domainToBitmask(domain::tethering) |
-        domainToBitmask(domain::net_private) |
-        domainToBitmask(domain::net_shared) |
-        domainToBitmask(domain::netd_readonly) |
-        domainToBitmask(domain::netd_shared);
-
 
 const android::bpf::Location locations[] = {
         // S+ Tethering mainline module (network_stack): tether offload
         {
                 .dir = "/apex/com.android.tethering/etc/bpf/",
                 .prefix = "tethering/",
-                .allowedDomainBitmask = kTetheringApexDomainBitmask,
         },
         // T+ Tethering mainline module (shared with netd & system server)
         // netutils_wrapper (for iptables xt_bpf) has access to programs
         {
                 .dir = "/apex/com.android.tethering/etc/bpf/netd_shared/",
                 .prefix = "netd_shared/",
-                .allowedDomainBitmask = kTetheringApexDomainBitmask,
         },
         // T+ Tethering mainline module (shared with netd & system server)
         // netutils_wrapper has no access, netd has read only access
         {
                 .dir = "/apex/com.android.tethering/etc/bpf/netd_readonly/",
                 .prefix = "netd_readonly/",
-                .allowedDomainBitmask = kTetheringApexDomainBitmask,
         },
         // T+ Tethering mainline module (shared with system server)
         {
                 .dir = "/apex/com.android.tethering/etc/bpf/net_shared/",
                 .prefix = "net_shared/",
-                .allowedDomainBitmask = kTetheringApexDomainBitmask,
         },
         // T+ Tethering mainline module (not shared, just network_stack)
         {
                 .dir = "/apex/com.android.tethering/etc/bpf/net_private/",
                 .prefix = "net_private/",
-                .allowedDomainBitmask = kTetheringApexDomainBitmask,
         },
 };
 
@@ -247,13 +235,6 @@
         if (createSysFsBpfSubDir(location.prefix)) return 1;
     }
 
-    // Note: there's no actual src dir for fs_bpf_loader .o's,
-    // so it is not listed in 'locations[].prefix'.
-    // This is because this is primarily meant for triggering genfscon rules,
-    // and as such this will likely always be the case.
-    // Thus we need to manually create the /sys/fs/bpf/loader subdirectory.
-    if (createSysFsBpfSubDir("loader")) return 1;
-
     // Load all ELF objects, create programs and maps, and pin them
     for (const auto& location : locations) {
         if (loadAllElfObjects(location) != 0) {
diff --git a/netbpfload/loader.cpp b/netbpfload/loader.cpp
index 9aeb184..c534b2c 100644
--- a/netbpfload/loader.cpp
+++ b/netbpfload/loader.cpp
@@ -621,8 +621,7 @@
 }
 
 static int createMaps(const char* elfPath, ifstream& elfFile, vector<unique_fd>& mapFds,
-                      const char* prefix, const unsigned long long allowedDomainBitmask,
-                      const size_t sizeOfBpfMapDef) {
+                      const char* prefix, const size_t sizeOfBpfMapDef) {
     int ret;
     vector<char> mdData;
     vector<struct bpf_map_def> md;
@@ -733,11 +732,6 @@
 
         domain selinux_context = getDomainFromSelinuxContext(md[i].selinux_context);
         if (specified(selinux_context)) {
-            if (!inDomainBitmask(selinux_context, allowedDomainBitmask)) {
-                ALOGE("map %s has invalid selinux_context of %d (allowed bitmask 0x%llx)",
-                      mapNames[i].c_str(), selinux_context, allowedDomainBitmask);
-                return -EINVAL;
-            }
             ALOGI("map %s selinux_context [%-32s] -> %d -> '%s' (%s)", mapNames[i].c_str(),
                   md[i].selinux_context, selinux_context, lookupSelinuxContext(selinux_context),
                   lookupPinSubdir(selinux_context));
@@ -746,11 +740,6 @@
         domain pin_subdir = getDomainFromPinSubdir(md[i].pin_subdir);
         if (unrecognized(pin_subdir)) return -ENOTDIR;
         if (specified(pin_subdir)) {
-            if (!inDomainBitmask(pin_subdir, allowedDomainBitmask)) {
-                ALOGE("map %s has invalid pin_subdir of %d (allowed bitmask 0x%llx)",
-                      mapNames[i].c_str(), pin_subdir, allowedDomainBitmask);
-                return -EINVAL;
-            }
             ALOGI("map %s pin_subdir [%-32s] -> %d -> '%s'", mapNames[i].c_str(), md[i].pin_subdir,
                   pin_subdir, lookupPinSubdir(pin_subdir));
         }
@@ -921,7 +910,7 @@
 }
 
 static int loadCodeSections(const char* elfPath, vector<codeSection>& cs, const string& license,
-                            const char* prefix, const unsigned long long allowedDomainBitmask) {
+                            const char* prefix) {
     unsigned kvers = kernelVersion();
 
     if (!kvers) {
@@ -980,22 +969,12 @@
         if (unrecognized(pin_subdir)) return -ENOTDIR;
 
         if (specified(selinux_context)) {
-            if (!inDomainBitmask(selinux_context, allowedDomainBitmask)) {
-                ALOGE("prog %s has invalid selinux_context of %d (allowed bitmask 0x%llx)",
-                      name.c_str(), selinux_context, allowedDomainBitmask);
-                return -EINVAL;
-            }
             ALOGI("prog %s selinux_context [%-32s] -> %d -> '%s' (%s)", name.c_str(),
                   cs[i].prog_def->selinux_context, selinux_context,
                   lookupSelinuxContext(selinux_context), lookupPinSubdir(selinux_context));
         }
 
         if (specified(pin_subdir)) {
-            if (!inDomainBitmask(pin_subdir, allowedDomainBitmask)) {
-                ALOGE("prog %s has invalid pin_subdir of %d (allowed bitmask 0x%llx)", name.c_str(),
-                      pin_subdir, allowedDomainBitmask);
-                return -EINVAL;
-            }
             ALOGI("prog %s pin_subdir [%-32s] -> %d -> '%s'", name.c_str(),
                   cs[i].prog_def->pin_subdir, pin_subdir, lookupPinSubdir(pin_subdir));
         }
@@ -1185,8 +1164,7 @@
     /* Just for future debugging */
     if (0) dumpAllCs(cs);
 
-    ret = createMaps(elfPath, elfFile, mapFds, location.prefix, location.allowedDomainBitmask,
-                     sizeOfBpfMapDef);
+    ret = createMaps(elfPath, elfFile, mapFds, location.prefix, sizeOfBpfMapDef);
     if (ret) {
         ALOGE("Failed to create maps: (ret=%d) in %s", ret, elfPath);
         return ret;
@@ -1197,8 +1175,7 @@
 
     applyMapRelo(elfFile, mapFds, cs);
 
-    ret = loadCodeSections(elfPath, cs, string(license.data()), location.prefix,
-                           location.allowedDomainBitmask);
+    ret = loadCodeSections(elfPath, cs, string(license.data()), location.prefix);
     if (ret) ALOGE("Failed to load programs, loadCodeSections ret=%d", ret);
 
     return ret;
diff --git a/netbpfload/loader.h b/netbpfload/loader.h
index 6402cea..b884637 100644
--- a/netbpfload/loader.h
+++ b/netbpfload/loader.h
@@ -64,18 +64,9 @@
     return d != domain::unspecified;
 }
 
-static constexpr unsigned long long domainToBitmask(domain d) {
-    return specified(d) ? 1uLL << (static_cast<int>(d) - 1) : 0;
-}
-
-static constexpr bool inDomainBitmask(domain d, unsigned long long v) {
-    return domainToBitmask(d) & v;
-}
-
 struct Location {
     const char* const dir = "";
     const char* const prefix = "";
-    unsigned long long allowedDomainBitmask = 0;
 };
 
 // BPF loader implementation. Loads an eBPF ELF object
diff --git a/netbpfload/netbpfload.rc b/netbpfload/netbpfload.rc
deleted file mode 100644
index 20fbb9f..0000000
--- a/netbpfload/netbpfload.rc
+++ /dev/null
@@ -1,85 +0,0 @@
-# zygote-start is what officially starts netd (see //system/core/rootdir/init.rc)
-# However, on some hardware it's started from post-fs-data as well, which is just
-# a tad earlier.  There's no benefit to that though, since on 4.9+ P+ devices netd
-# will just block until bpfloader finishes and sets the bpf.progs_loaded property.
-#
-# It is important that we start netbpfload after:
-#   - /sys/fs/bpf is already mounted,
-#   - apex (incl. rollback) is initialized (so that in the future we can load bpf
-#     programs shipped as part of apex mainline modules)
-#   - logd is ready for us to log stuff
-#
-# At the same time we want to be as early as possible to reduce races and thus
-# failures (before memory is fragmented, and cpu is busy running tons of other
-# stuff) and we absolutely want to be before netd and the system boot slot is
-# considered to have booted successfully.
-#
-on load_bpf_programs
-    exec_start netbpfload
-
-service netbpfload /system/bin/netbpfload
-    capabilities CHOWN SYS_ADMIN NET_ADMIN
-    # The following group memberships are a workaround for lack of DAC_OVERRIDE
-    # and allow us to open (among other things) files that we created and are
-    # no longer root owned (due to CHOWN) but still have group read access to
-    # one of the following groups.  This is not perfect, but a more correct
-    # solution requires significantly more effort to implement.
-    group root graphics network_stack net_admin net_bw_acct net_bw_stats net_raw system
-    user root
-    #
-    # Set RLIMIT_MEMLOCK to 1GiB for netbpfload
-    #
-    # Actually only 8MiB would be needed if netbpfload ran as its own uid.
-    #
-    # However, while the rlimit is per-thread, the accounting is system wide.
-    # So, for example, if the graphics stack has already allocated 10MiB of
-    # memlock data before netbpfload even gets a chance to run, it would fail
-    # if its memlock rlimit is only 8MiB - since there would be none left for it.
-    #
-    # netbpfload succeeding is critical to system health, since a failure will
-    # cause netd crashloop and thus system server crashloop... and the only
-    # recovery is a full kernel reboot.
-    #
-    # We've had issues where devices would sometimes (rarely) boot into
-    # a crashloop because netbpfload would occasionally lose a boot time
-    # race against the graphics stack's boot time locked memory allocation.
-    #
-    # Thus netbpfload's memlock has to be 8MB higher then the locked memory
-    # consumption of the root uid anywhere else in the system...
-    # But we don't know what that is for all possible devices...
-    #
-    # Ideally, we'd simply grant netbpfload the IPC_LOCK capability and it
-    # would simply ignore it's memlock rlimit... but it turns that this
-    # capability is not even checked by the kernel's bpf system call.
-    #
-    # As such we simply use 1GiB as a reasonable approximation of infinity.
-    #
-    rlimit memlock 1073741824 1073741824
-    oneshot
-    #
-    # How to debug bootloops caused by 'netbpfload-failed'.
-    #
-    # 1. On some lower RAM devices (like wembley) you may need to first enable developer mode
-    #    (from the Settings app UI), and change the developer option "Logger buffer sizes"
-    #    from the default (wembley: 64kB) to the maximum (1M) per log buffer.
-    #    Otherwise buffer will overflow before you manage to dump it and you'll get useless logs.
-    #
-    # 2. comment out 'reboot_on_failure reboot,netbpfload-failed' below
-    # 3. rebuild/reflash/reboot
-    # 4. as the device is booting up capture netbpfload logs via:
-    #    adb logcat -s 'NetBpfLoad:*' 'NetBpfLoader:*'
-    #
-    # something like:
-    #   $ adb reboot; sleep 1; adb wait-for-device; adb root; sleep 1; adb wait-for-device; adb logcat -s 'NetBpfLoad:*' 'NetBpfLoader:*'
-    # will take care of capturing logs as early as possible
-    #
-    # 5. look through the logs from the kernel's bpf verifier that netbpfload dumps out,
-    #    it usually makes sense to search back from the end and find the particular
-    #    bpf verifier failure that caused netbpfload to terminate early with an error code.
-    #    This will probably be something along the lines of 'too many jumps' or
-    #    'cannot prove return value is 0 or 1' or 'unsupported / unknown operation / helper',
-    #    'invalid bpf_context access', etc.
-    #
-    reboot_on_failure reboot,netbpfload-failed
-    # we're not really updatable, but want to be able to load bpf programs shipped in apexes
-    updatable