diff --git a/include/hardware/gralloc1.h b/include/hardware/gralloc1.h
new file mode 100644
index 0000000..58c0e33
--- /dev/null
+++ b/include/hardware/gralloc1.h
@@ -0,0 +1,887 @@
+/*
+ * Copyright 2015 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef ANDROID_HARDWARE_GRALLOC1_H
+#define ANDROID_HARDWARE_GRALLOC1_H
+
+#include <hardware/hardware.h>
+#include <system/window.h>
+
+__BEGIN_DECLS
+
+#define GRALLOC_MODULE_API_VERSION_1_0 HARDWARE_MODULE_API_VERSION(1, 0)
+#define GRALLOC_HARDWARE_MODULE_ID "gralloc"
+
+/*
+ * Enums
+ */
+
+typedef enum {
+    GRALLOC1_CAPABILITY_INVALID = 0,
+
+    /* If this capability is supported, then the outBuffers parameter to
+     * allocate may be NULL, which instructs the device to report whether the
+     * given allocation is possible or not. */
+    GRALLOC1_CAPABILITY_TEST_ALLOCATE = 1,
+    GRALLOC1_LAST_CAPABILITY = 1,
+} gralloc1_capability_t;
+
+typedef enum {
+    GRALLOC1_CONSUMER_USAGE_NONE = 0,
+    GRALLOC1_CONSUMER_USAGE_CPU_READ_NEVER = 0,
+    /* 1ULL << 0 */
+    GRALLOC1_CONSUMER_USAGE_CPU_READ = 1ULL << 1,
+    GRALLOC1_CONSUMER_USAGE_CPU_READ_OFTEN = 1ULL << 2 |
+            GRALLOC1_CONSUMER_USAGE_CPU_READ,
+    /* 1ULL << 3 */
+    /* 1ULL << 4 */
+    /* 1ULL << 5 */
+    /* 1ULL << 6 */
+    /* 1ULL << 7 */
+    GRALLOC1_CONSUMER_USAGE_GPU_TEXTURE = 1ULL << 8,
+    /* 1ULL << 9 */
+    /* 1ULL << 10 */
+    GRALLOC1_CONSUMER_USAGE_HWCOMPOSER = 1ULL << 11,
+    GRALLOC1_CONSUMER_USAGE_CLIENT_TARGET = 1ULL << 12,
+    /* 1ULL << 13 */
+    /* 1ULL << 14 */
+    GRALLOC1_CONSUMER_USAGE_CURSOR = 1ULL << 15,
+    GRALLOC1_CONSUMER_USAGE_VIDEO_ENCODER = 1ULL << 16,
+    /* 1ULL << 17 */
+    GRALLOC1_CONSUMER_USAGE_CAMERA = 1ULL << 18,
+    /* 1ULL << 19 */
+    GRALLOC1_CONSUMER_USAGE_RENDERSCRIPT = 1ULL << 20,
+
+    /* Indicates that the consumer may attach buffers to their end of the
+     * BufferQueue, which means that the producer may never have seen a given
+     * dequeued buffer before. May be ignored by the gralloc device. */
+    GRALLOC1_CONSUMER_USAGE_FOREIGN_BUFFERS = 1ULL << 21,
+
+    /* 1ULL << 22 */
+    /* 1ULL << 23 */
+    /* 1ULL << 24 */
+    /* 1ULL << 25 */
+    /* 1ULL << 26 */
+    /* 1ULL << 27 */
+
+    /* Bits reserved for implementation-specific usage flags */
+    GRALLOC1_CONSUMER_USAGE_PRIVATE_0 = 1ULL << 28,
+    GRALLOC1_CONSUMER_USAGE_PRIVATE_1 = 1ULL << 29,
+    GRALLOC1_CONSUMER_USAGE_PRIVATE_2 = 1ULL << 30,
+    GRALLOC1_CONSUMER_USAGE_PRIVATE_3 = 1ULL << 31,
+
+    /* 1ULL << 32 */
+    /* 1ULL << 33 */
+    /* 1ULL << 34 */
+    /* 1ULL << 35 */
+    /* 1ULL << 36 */
+    /* 1ULL << 37 */
+    /* 1ULL << 38 */
+    /* 1ULL << 39 */
+    /* 1ULL << 40 */
+    /* 1ULL << 41 */
+    /* 1ULL << 42 */
+    /* 1ULL << 43 */
+    /* 1ULL << 44 */
+    /* 1ULL << 45 */
+    /* 1ULL << 46 */
+    /* 1ULL << 47 */
+
+    /* Bits reserved for implementation-specific usage flags */
+    GRALLOC1_CONSUMER_USAGE_PRIVATE_19 = 1ULL << 48,
+    GRALLOC1_CONSUMER_USAGE_PRIVATE_18 = 1ULL << 49,
+    GRALLOC1_CONSUMER_USAGE_PRIVATE_17 = 1ULL << 50,
+    GRALLOC1_CONSUMER_USAGE_PRIVATE_16 = 1ULL << 51,
+    GRALLOC1_CONSUMER_USAGE_PRIVATE_15 = 1ULL << 52,
+    GRALLOC1_CONSUMER_USAGE_PRIVATE_14 = 1ULL << 53,
+    GRALLOC1_CONSUMER_USAGE_PRIVATE_13 = 1ULL << 54,
+    GRALLOC1_CONSUMER_USAGE_PRIVATE_12 = 1ULL << 55,
+    GRALLOC1_CONSUMER_USAGE_PRIVATE_11 = 1ULL << 56,
+    GRALLOC1_CONSUMER_USAGE_PRIVATE_10 = 1ULL << 57,
+    GRALLOC1_CONSUMER_USAGE_PRIVATE_9 = 1ULL << 58,
+    GRALLOC1_CONSUMER_USAGE_PRIVATE_8 = 1ULL << 59,
+    GRALLOC1_CONSUMER_USAGE_PRIVATE_7 = 1ULL << 60,
+    GRALLOC1_CONSUMER_USAGE_PRIVATE_6 = 1ULL << 61,
+    GRALLOC1_CONSUMER_USAGE_PRIVATE_5 = 1ULL << 62,
+    GRALLOC1_CONSUMER_USAGE_PRIVATE_4 = 1ULL << 63,
+} gralloc1_consumer_usage_t;
+
+typedef enum {
+    GRALLOC1_FUNCTION_INVALID = 0,
+    GRALLOC1_FUNCTION_DUMP = 1,
+    GRALLOC1_FUNCTION_CREATE_DESCRIPTOR = 2,
+    GRALLOC1_FUNCTION_DESTROY_DESCRIPTOR = 3,
+    GRALLOC1_FUNCTION_SET_CONSUMER_USAGE = 4,
+    GRALLOC1_FUNCTION_SET_DIMENSIONS = 5,
+    GRALLOC1_FUNCTION_SET_FORMAT = 6,
+    GRALLOC1_FUNCTION_SET_PRODUCER_USAGE = 7,
+    GRALLOC1_FUNCTION_GET_BACKING_STORE = 8,
+    GRALLOC1_FUNCTION_GET_CONSUMER_USAGE = 9,
+    GRALLOC1_FUNCTION_GET_DIMENSIONS = 10,
+    GRALLOC1_FUNCTION_GET_FORMAT = 11,
+    GRALLOC1_FUNCTION_GET_PRODUCER_USAGE = 12,
+    GRALLOC1_FUNCTION_GET_STRIDE = 13,
+    GRALLOC1_FUNCTION_ALLOCATE = 14,
+    GRALLOC1_FUNCTION_RETAIN = 15,
+    GRALLOC1_FUNCTION_RELEASE = 16,
+    GRALLOC1_FUNCTION_GET_NUM_FLEX_PLANES = 17,
+    GRALLOC1_FUNCTION_LOCK = 18,
+    GRALLOC1_FUNCTION_LOCK_FLEX = 19,
+    GRALLOC1_FUNCTION_UNLOCK = 20,
+    GRALLOC1_LAST_FUNCTION = 20,
+} gralloc1_function_descriptor_t;
+
+typedef enum {
+    GRALLOC1_ERROR_NONE = 0,
+    GRALLOC1_ERROR_BAD_DESCRIPTOR = 1,
+    GRALLOC1_ERROR_BAD_HANDLE = 2,
+    GRALLOC1_ERROR_BAD_VALUE = 3,
+    GRALLOC1_ERROR_NOT_SHARED = 4,
+    GRALLOC1_ERROR_NO_RESOURCES = 5,
+    GRALLOC1_ERROR_UNDEFINED = 6,
+    GRALLOC1_ERROR_UNSUPPORTED = 7,
+} gralloc1_error_t;
+
+typedef enum {
+    GRALLOC1_PRODUCER_USAGE_NONE = 0,
+    GRALLOC1_PRODUCER_USAGE_CPU_WRITE_NEVER = 0,
+    /* 1ULL << 0 */
+    GRALLOC1_PRODUCER_USAGE_CPU_READ = 1ULL << 1,
+    GRALLOC1_PRODUCER_USAGE_CPU_READ_OFTEN = 1ULL << 2 |
+            GRALLOC1_PRODUCER_USAGE_CPU_READ,
+    /* 1ULL << 3 */
+    /* 1ULL << 4 */
+    GRALLOC1_PRODUCER_USAGE_CPU_WRITE = 1ULL << 5,
+    GRALLOC1_PRODUCER_USAGE_CPU_WRITE_OFTEN = 1ULL << 6 |
+            GRALLOC1_PRODUCER_USAGE_CPU_WRITE,
+    /* 1ULL << 7 */
+    /* 1ULL << 8 */
+    GRALLOC1_PRODUCER_USAGE_GPU_RENDER_TARGET = 1ULL << 9,
+    /* 1ULL << 10 */
+    /* 1ULL << 11 */
+    /* 1ULL << 12 */
+    /* 1ULL << 13 */
+
+    /* The consumer must have a hardware-protected path to an external display
+     * sink for this buffer. If a hardware-protected path is not available, then
+     * do not attempt to display this buffer. */
+    GRALLOC1_PRODUCER_USAGE_PROTECTED = 1ULL << 14,
+
+    /* 1ULL << 15 */
+    /* 1ULL << 16 */
+    GRALLOC1_PRODUCER_USAGE_CAMERA = 1ULL << 17,
+    /* 1ULL << 18 */
+    /* 1ULL << 19 */
+    /* 1ULL << 20 */
+    /* 1ULL << 21 */
+    GRALLOC1_PRODUCER_USAGE_VIDEO_DECODER = 1ULL << 22,
+    /* 1ULL << 23 */
+    /* 1ULL << 24 */
+    /* 1ULL << 25 */
+    /* 1ULL << 26 */
+    /* 1ULL << 27 */
+
+    /* Bits reserved for implementation-specific usage flags */
+    GRALLOC1_PRODUCER_USAGE_PRIVATE_0 = 1ULL << 28,
+    GRALLOC1_PRODUCER_USAGE_PRIVATE_1 = 1ULL << 29,
+    GRALLOC1_PRODUCER_USAGE_PRIVATE_2 = 1ULL << 30,
+    GRALLOC1_PRODUCER_USAGE_PRIVATE_3 = 1ULL << 31,
+
+    /* 1ULL << 32 */
+    /* 1ULL << 33 */
+    /* 1ULL << 34 */
+    /* 1ULL << 35 */
+    /* 1ULL << 36 */
+    /* 1ULL << 37 */
+    /* 1ULL << 38 */
+    /* 1ULL << 39 */
+    /* 1ULL << 40 */
+    /* 1ULL << 41 */
+    /* 1ULL << 42 */
+    /* 1ULL << 43 */
+    /* 1ULL << 44 */
+    /* 1ULL << 45 */
+    /* 1ULL << 46 */
+    /* 1ULL << 47 */
+
+    /* Bits reserved for implementation-specific usage flags */
+    GRALLOC1_PRODUCER_USAGE_PRIVATE_19 = 1ULL << 48,
+    GRALLOC1_PRODUCER_USAGE_PRIVATE_18 = 1ULL << 49,
+    GRALLOC1_PRODUCER_USAGE_PRIVATE_17 = 1ULL << 50,
+    GRALLOC1_PRODUCER_USAGE_PRIVATE_16 = 1ULL << 51,
+    GRALLOC1_PRODUCER_USAGE_PRIVATE_15 = 1ULL << 52,
+    GRALLOC1_PRODUCER_USAGE_PRIVATE_14 = 1ULL << 53,
+    GRALLOC1_PRODUCER_USAGE_PRIVATE_13 = 1ULL << 54,
+    GRALLOC1_PRODUCER_USAGE_PRIVATE_12 = 1ULL << 55,
+    GRALLOC1_PRODUCER_USAGE_PRIVATE_11 = 1ULL << 56,
+    GRALLOC1_PRODUCER_USAGE_PRIVATE_10 = 1ULL << 57,
+    GRALLOC1_PRODUCER_USAGE_PRIVATE_9 = 1ULL << 58,
+    GRALLOC1_PRODUCER_USAGE_PRIVATE_8 = 1ULL << 59,
+    GRALLOC1_PRODUCER_USAGE_PRIVATE_7 = 1ULL << 60,
+    GRALLOC1_PRODUCER_USAGE_PRIVATE_6 = 1ULL << 61,
+    GRALLOC1_PRODUCER_USAGE_PRIVATE_5 = 1ULL << 62,
+    GRALLOC1_PRODUCER_USAGE_PRIVATE_4 = 1ULL << 63,
+} gralloc1_producer_usage_t;
+
+/*
+ * Typedefs
+ */
+
+typedef void (*gralloc1_function_pointer_t)();
+
+typedef uint64_t gralloc1_backing_store_t;
+typedef uint64_t gralloc1_buffer_descriptor_t;
+
+/*
+ * Device Struct
+ */
+
+typedef struct gralloc1_device {
+    /* Must be the first member of this struct, since a pointer to this struct
+     * will be generated by casting from a hw_device_t* */
+    struct hw_device_t common;
+
+    /* getCapabilities(..., outCount, outCapabilities)
+     *
+     * Provides a list of capabilities (described in the definition of
+     * gralloc1_capability_t above) supported by this device. This list must not
+     * change after the device has been loaded.
+     *
+     * Parameters:
+     *   outCount - if outCapabilities was NULL, the number of capabilities
+     *       which would have been returned; if outCapabilities was not NULL,
+     *       the number of capabilities returned, which must not exceed the
+     *       value stored in outCount prior to the call
+     *   outCapabilities - a list of capabilities supported by this device; may
+     *       be NULL, in which case this function must write into outCount the
+     *       number of capabilities which would have been written into
+     *       outCapabilities
+     */
+    void (*getCapabilities)(struct gralloc1_device* device, uint32_t* outCount,
+            int32_t* /*gralloc1_capability_t*/ outCapabilities);
+
+    /* getFunction(..., descriptor)
+     *
+     * Returns a function pointer which implements the requested description.
+     *
+     * Parameters:
+     *   descriptor - the function to return
+     *
+     * Returns either a function pointer implementing the requested descriptor
+     *   or NULL if the described function is not supported by this device.
+     */
+    gralloc1_function_pointer_t (*getFunction)(struct gralloc1_device* device,
+            int32_t /*gralloc1_function_descriptor_t*/ descriptor);
+} gralloc1_device_t;
+
+static inline int gralloc1_open(const struct hw_module_t* module,
+        gralloc1_device_t** device) {
+    return module->methods->open(module, GRALLOC_HARDWARE_MODULE_ID,
+            (struct hw_device_t**) device);
+}
+
+static inline int gralloc1_close(gralloc1_device_t* device) {
+    return device->common.close(&device->common);
+}
+
+/* dump(..., outSize, outBuffer)
+ * Function descriptor: GRALLOC1_FUNCTION_DUMP
+ * Must be provided by all gralloc1 devices
+ *
+ * Retrieves implementation-defined debug information, which will be displayed
+ * during, for example, `dumpsys SurfaceFlinger`.
+ *
+ * If called with outBuffer == NULL, the device should store a copy of the
+ * desired output and return its length in bytes in outSize. If the device
+ * already has a stored copy, that copy should be purged and replaced with a
+ * fresh copy.
+ *
+ * If called with outBuffer != NULL, the device should copy its stored version
+ * of the output into outBuffer and store how many bytes of data it copied into
+ * outSize. Prior to this call, the client will have populated outSize with the
+ * maximum number of bytes outBuffer can hold. The device must not write more
+ * than this amount into outBuffer. If the device does not currently have a
+ * stored copy, then it should return 0 in outSize.
+ *
+ * Any data written into outBuffer need not be null-terminated.
+ *
+ * Parameters:
+ *   outSize - if outBuffer was NULL, the number of bytes needed to copy the
+ *       device's stored output; if outBuffer was not NULL, the number of bytes
+ *       written into it, which must not exceed the value stored in outSize
+ *       prior to the call; pointer will be non-NULL
+ *   outBuffer - the buffer to write the dump output into; may be NULL as
+ *       described above; data written into this buffer need not be
+ *       null-terminated
+ */
+typedef void (*GRALLOC1_PFN_DUMP)(gralloc1_device_t* device, uint32_t* outSize,
+        char* outBuffer);
+
+/*
+ * Buffer descriptor lifecycle functions
+ *
+ * All of these functions take as their first parameter a device pointer, so
+ * this parameter is omitted from the described parameter lists.
+ */
+
+/* createDescriptor(..., outDescriptor)
+ * Function descriptor: GRALLOC1_FUNCTION_CREATE_DESCRIPTOR
+ * Must be provided by all gralloc1 devices
+ *
+ * Creates a new, empty buffer descriptor.
+ *
+ * Parameters:
+ *   outDescriptor - the new buffer descriptor
+ *
+ * Returns GRALLOC1_ERROR_NONE or one of the following errors:
+ *   GRALLOC1_ERROR_NO_RESOURCES - no more descriptors can currently be created
+ */
+typedef int32_t /*gralloc1_error_t*/ (*GRALLOC1_PFN_CREATE_DESCRIPTOR)(
+        gralloc1_device_t* device, gralloc1_buffer_descriptor_t* outDescriptor);
+
+/* destroyDescriptor(..., descriptor)
+ * Function descriptor: GRALLOC1_FUNCTION_DESTROY_DESCRIPTOR
+ * Must be provided by all gralloc1 devices
+ *
+ * Destroys an existing buffer descriptor.
+ *
+ * Parameters:
+ *   descriptor - the buffer descriptor to destroy
+ *
+ * Returns GRALLOC1_ERROR_NONE or one of the following errors:
+ *   GRALLOC1_ERROR_BAD_DESCRIPTOR - descriptor does not refer to a valid
+ *       buffer descriptor
+ */
+typedef int32_t /*gralloc1_error_t*/ (*GRALLOC1_PFN_DESTROY_DESCRIPTOR)(
+        gralloc1_device_t* device, gralloc1_buffer_descriptor_t descriptor);
+
+/*
+ * Buffer descriptor modification functions
+ *
+ * All of these functions take as their first two parameters a device pointer
+ * and a buffer descriptor, so these parameters are omitted from the described
+ * parameter lists.
+ */
+
+/* setConsumerUsage(..., usage)
+ * Function descriptor: GRALLOC1_FUNCTION_SET_CONSUMER_USAGE
+ * Must be provided by all gralloc1 devices
+ *
+ * Sets the desired consumer usage flags of the buffer.
+ *
+ * Valid usage flags can be found in the definition of gralloc1_consumer_usage_t
+ * above.
+ *
+ * Parameters:
+ *   usage - the desired consumer usage flags
+ *
+ * Returns GRALLOC1_ERROR_NONE or one of the following errors:
+ *   GRALLOC1_ERROR_BAD_DESCRIPTOR - the buffer descriptor is invalid
+ *   GRALLOC1_ERROR_BAD_VALUE - an invalid usage flag was passed in
+ */
+typedef int32_t /*gralloc1_error_t*/ (*GRALLOC1_PFN_SET_CONSUMER_USAGE)(
+        gralloc1_device_t* device, gralloc1_buffer_descriptor_t descriptor,
+        uint64_t /*gralloc1_consumer_usage_t*/ usage);
+
+/* setDimensions(..., width, height)
+ * Function descriptor: GRALLOC1_FUNCTION_SET_DIMENSIONS
+ * Must be provided by all gralloc1 devices
+ *
+ * Sets the desired width and height of the buffer in pixels.
+ *
+ * The width specifies how many columns of pixels should be in the allocated
+ * buffer, but does not necessarily represent the offset in columns between the
+ * same column in adjacent rows. If this offset is required, consult getStride
+ * below.
+ *
+ * The height specifies how many rows of pixels should be in the allocated
+ * buffer.
+ *
+ * Parameters:
+ *   width - the desired width in pixels
+ *   height - the desired height in pixels
+ *
+ * Returns GRALLOC1_ERROR_NONE or one of the following errors:
+ *   GRALLOC1_ERROR_BAD_DESCRIPTOR - the buffer descriptor is invalid
+ */
+typedef int32_t /*gralloc1_error_t*/ (*GRALLOC1_PFN_SET_DIMENSIONS)(
+        gralloc1_device_t* device, gralloc1_buffer_descriptor_t descriptor,
+        uint32_t width, uint32_t height);
+
+/* setFormat(..., format)
+ * Function descriptor: GRALLOC1_FUNCTION_SET_FORMAT
+ * Must be provided by all gralloc1 devices
+ *
+ * Sets the desired format of the buffer.
+ *
+ * The valid formats can be found in <system/graphics.h>.
+ *
+ * Parameters:
+ *   format - the desired format
+ *
+ * Returns GRALLOC1_ERROR_NONE or one of the following errors:
+ *   GRALLOC1_ERROR_BAD_DESCRIPTOR - the buffer descriptor is invalid
+ *   GRALLOC1_ERROR_BAD_VALUE - format is invalid
+ */
+typedef int32_t /*gralloc1_error_t*/ (*GRALLOC1_PFN_SET_FORMAT)(
+        gralloc1_device_t* device, gralloc1_buffer_descriptor_t descriptor,
+        int32_t /*android_pixel_format_t*/ format);
+
+/* setProducerUsage(..., usage)
+ * Function descriptor: GRALLOC1_FUNCTION_SET_PRODUCER_USAGE
+ * Must be provided by all gralloc1 devices
+ *
+ * Sets the desired producer usage flags of the buffer.
+ *
+ * Valid usage flags can be found in the definition of gralloc1_producer_usage_t
+ * above.
+ *
+ * Parameters:
+ *   usage - the desired producer usage flags
+ *
+ * Returns GRALLOC1_ERROR_NONE or one of the following errors:
+ *   GRALLOC1_ERROR_BAD_DESCRIPTOR - the buffer descriptor is invalid
+ *   GRALLOC1_ERROR_BAD_VALUE - an invalid usage flag was passed in
+ */
+typedef int32_t /*gralloc1_error_t*/ (*GRALLOC1_PFN_SET_PRODUCER_USAGE)(
+        gralloc1_device_t* device, gralloc1_buffer_descriptor_t descriptor,
+        uint64_t /*gralloc1_producer_usage_t*/ usage);
+
+/*
+ * Buffer handle query functions
+ *
+ * All of these functions take as their first two parameters a device pointer
+ * and a buffer handle, so these parameters are omitted from the described
+ * parameter lists.
+ *
+ * [1] Currently many of these functions may return GRALLOC1_ERROR_UNSUPPORTED,
+ * which means that the device is not able to retrieve the requested information
+ * from the buffer. This is necessary to enable a smooth transition from earlier
+ * versions of the gralloc HAL, but gralloc1 implementers are strongly
+ * discouraged from returning this value, as future versions of the platform
+ * code will require all of these functions to succeed given a valid handle.
+ */
+
+/* getBackingStore(..., outStore)
+ * Function descriptor: GRALLOC1_FUNCTION_GET_BACKING_STORE
+ * Must be provided by all gralloc1 devices
+ *
+ * Gets a value that uniquely identifies the backing store of the given buffer.
+ *
+ * Buffers which share a backing store should return the same value from this
+ * function. If the buffer is present in more than one process, the backing
+ * store value for that buffer is not required to be the same in every process.
+ *
+ * Parameters:
+ *   outStore - the backing store identifier for this buffer
+ *
+ * Returns GRALLOC1_ERROR_NONE or one of the following errors:
+ *   GRALLOC1_ERROR_BAD_HANDLE - the buffer handle is invalid
+ *   GRALLOC1_ERROR_UNSUPPORTED - the device is unable to retrieve the
+ *       backing store identifier from the buffer; see note [1] in this
+ *       section's header for more information
+ */
+typedef int32_t /*gralloc1_error_t*/ (*GRALLOC1_PFN_GET_BACKING_STORE)(
+        gralloc1_device_t* device, buffer_handle_t buffer,
+        gralloc1_backing_store_t* outStore);
+
+/* getConsumerUsage(..., outUsage)
+ * Function descriptor: GRALLOC1_FUNCTION_GET_CONSUMER_USAGE
+ * Must be provided by all gralloc1 devices
+ *
+ * Gets the consumer usage flags which were used to allocate this buffer.
+ *
+ * Usage flags can be found in the definition of gralloc1_consumer_usage_t above
+ *
+ * Parameters:
+ *   outUsage - the consumer usage flags used to allocate this buffer; must be
+ *       non-NULL
+ *
+ * Returns GRALLOC1_ERROR_NONE or one of the following errors:
+ *   GRALLOC1_ERROR_BAD_HANDLE - the buffer handle is invalid
+ *   GRALLOC1_ERROR_UNSUPPORTED - the device is unable to retrieve the
+ *       dimensions from the buffer; see note [1] in this section's header for
+ *       more information
+ */
+typedef int32_t /*gralloc1_error_t*/ (*GRALLOC1_PFN_GET_CONSUMER_USAGE)(
+        gralloc1_device_t* device, buffer_handle_t buffer,
+        uint64_t* /*gralloc1_consumer_usage_t*/ outUsage);
+
+/* getDimensions(..., outWidth, outHeight)
+ * Function descriptor: GRALLOC1_FUNCTION_GET_DIMENSIONS
+ * Must be provided by all gralloc1 devices
+ *
+ * Gets the width and height of the buffer in pixels.
+ *
+ * See setDimensions for more information about these values.
+ *
+ * Parameters:
+ *   outWidth - the width of the buffer in pixels, must be non-NULL
+ *   outHeight - the height of the buffer in pixels, must be non-NULL
+ *
+ * Returns GRALLOC1_ERROR_NONE or one of the following errors:
+ *   GRALLOC1_ERROR_BAD_HANDLE - the buffer handle is invalid
+ *   GRALLOC1_ERROR_UNSUPPORTED - the device is unable to retrieve the
+ *       dimensions from the buffer; see note [1] in this section's header for
+ *       more information
+ */
+typedef int32_t /*gralloc1_error_t*/ (*GRALLOC1_PFN_GET_DIMENSIONS)(
+        gralloc1_device_t* device, buffer_handle_t buffer, uint32_t* outWidth,
+        uint32_t* outHeight);
+
+/* getFormat(..., outFormat)
+ * Function descriptor: GRALLOC1_FUNCTION_GET_FORMAT
+ * Must be provided by all gralloc1 devices
+ *
+ * Gets the format of the buffer.
+ *
+ * The valid formats can be found in the HAL_PIXEL_FORMAT_* enum in
+ * system/graphics.h.
+ *
+ * Parameters:
+ *   outFormat - the format of the buffer; must be non-NULL
+ *
+ * Returns GRALLOC1_ERROR_NONE or one of the following errors:
+ *   GRALLOC1_ERROR_BAD_HANDLE - the buffer handle is invalid
+ *   GRALLOC1_ERROR_UNSUPPORTED - the device is unable to retrieve the format
+ *       from the buffer; see note [1] in this section's header for more
+ *       information
+ */
+typedef int32_t /*gralloc1_error_t*/ (*GRALLOC1_PFN_GET_FORMAT)(
+        gralloc1_device_t* device, buffer_handle_t descriptor,
+        int32_t* outFormat);
+
+/* getProducerUsage(..., outUsage)
+ * Function descriptor: GRALLOC1_FUNCTION_GET_PRODUCER_USAGE
+ * Must be provided by all gralloc1 devices
+ *
+ * Gets the producer usage flags which were used to allocate this buffer.
+ *
+ * Usage flags can be found in the definition of gralloc1_producer_usage_t above
+ *
+ * Parameters:
+ *   outUsage - the producer usage flags used to allocate this buffer; must be
+ *       non-NULL
+ *
+ * Returns GRALLOC1_ERROR_NONE or one of the following errors:
+ *   GRALLOC1_ERROR_BAD_HANDLE - the buffer handle is invalid
+ *   GRALLOC1_ERROR_UNSUPPORTED - the device is unable to retrieve the usage
+ *       from the buffer; see note [1] in this section's header for more
+ *       information
+ */
+typedef int32_t /*gralloc1_error_t*/ (*GRALLOC1_PFN_GET_PRODUCER_USAGE)(
+        gralloc1_device_t* device, buffer_handle_t buffer,
+        uint64_t* /*gralloc1_producer_usage_t*/ outUsage);
+
+/* getStride(..., outStride)
+ * Function descriptor: GRALLOC1_FUNCTION_GET_STRIDE
+ * Must be provided by all gralloc1 devices
+ *
+ * Gets the stride of the buffer in pixels.
+ *
+ * The stride is the offset in pixel-sized elements between the same column in
+ * two adjacent rows of pixels. This may not be equal to the width of the
+ * buffer.
+ *
+ * Parameters:
+ *   outStride - the stride in pixels; must be non-NULL
+ *
+ * Returns GRALLOC1_ERROR_NONE or one of the following errors:
+ *   GRALLOC1_ERROR_BAD_HANDLE - the buffer handle is invalid
+ *   GRALLOC1_ERROR_UNDEFINED - the notion of a stride is not meaningful for
+ *       this format
+ *   GRALLOC1_ERROR_UNSUPPORTED - the device is unable to retrieve the stride
+ *       from the descriptor; see note [1] in this section's header for more
+ *       information
+ */
+typedef int32_t /*gralloc1_error_t*/ (*GRALLOC1_PFN_GET_STRIDE)(
+        gralloc1_device_t* device, buffer_handle_t buffer, uint32_t* outStride);
+
+/*
+ * Buffer management functions
+ */
+
+/* allocate(..., numDescriptors, descriptors, outBuffers)
+ * Function descriptor: GRALLOC1_FUNCTION_ALLOCATE
+ * Must be provided by all gralloc1 devices
+ *
+ * Attempts to allocate a number of buffers sharing a backing store.
+ *
+ * Each buffer will correspond to one of the descriptors passed into the
+ * function. If the device is unable to share the backing store between the
+ * buffers, it should attempt to allocate the buffers with different backing
+ * stores and return GRALLOC1_ERROR_NOT_SHARED if it is successful.
+ *
+ * If this call is successful, the client is responsible for freeing the
+ * buffer_handle_t using release() when it is finished with the buffer. It is
+ * not necessary to call retain() on the returned buffers, as they must have a
+ * reference added by the device before returning.
+ *
+ * If GRALLOC1_CAPABILITY_TEST_ALLOCATE is supported by this device, outBuffers
+ * may be NULL. In this case, the device must not attempt to allocate any
+ * buffers, but instead must return either GRALLOC1_ERROR_NONE if such an
+ * allocation is possible (ignoring potential resource contention which might
+ * lead to a GRALLOC1_ERROR_NO_RESOURCES error), GRALLOC1_ERROR_NOT_SHARED if
+ * the buffers can be allocated, but cannot share a backing store, or
+ * GRALLOC1_ERROR_UNSUPPORTED if one or more of the descriptors can never be
+ * allocated by the device.
+ *
+ * Parameters:
+ *   numDescriptors - the number of buffer descriptors, which must also be equal
+ *       to the size of the outBuffers array
+ *   descriptors - the buffer descriptors to attempt to allocate
+ *   outBuffers - the allocated buffers; must be non-NULL unless the device
+ *       supports GRALLOC1_CAPABILITY_TEST_ALLOCATE (see above), and must not be
+ *       modified by the device if allocation is unsuccessful
+ *
+ * Returns GRALLOC1_ERROR_NONE or one of the following errors:
+ *   GRALLOC1_ERROR_BAD_DESCRIPTOR - one of the descriptors does not refer to a
+ *      valid buffer descriptor
+ *   GRALLOC1_ERROR_NOT_SHARED - allocation was successful, but required more
+ *       than one backing store to satisfy all of the buffer descriptors
+ *   GRALLOC1_ERROR_NO_RESOURCES - allocation failed because one or more of the
+ *       backing stores could not be created at this time (but this allocation
+ *       might succeed at a future time)
+ *   GRALLOC1_ERROR_UNSUPPORTED - one or more of the descriptors can never be
+ *       satisfied by the device
+ */
+typedef int32_t /*gralloc1_error_t*/ (*GRALLOC1_PFN_ALLOCATE)(
+        gralloc1_device_t* device, uint32_t numDescriptors,
+        const gralloc1_buffer_descriptor_t* descriptors,
+        buffer_handle_t* outBuffers);
+
+/* retain(..., buffer)
+ * Function descriptor: GRALLOC1_FUNCTION_RETAIN
+ * Must be provided by all gralloc1 devices
+ *
+ * Adds a reference to the given buffer.
+ *
+ * This function must be called when a buffer_handle_t is received from a remote
+ * process to prevent the buffer's data from being freed when the remote process
+ * releases the buffer. It may also be called to increase the reference count if
+ * two components in the same process want to interact with the buffer
+ * independently.
+ *
+ * Parameters:
+ *   buffer - the buffer to which a reference should be added
+ *
+ * Returns GRALLOC1_ERROR_NONE or one of the following errors:
+ *   GRALLOC1_ERROR_BAD_HANDLE - the buffer handle is invalid
+ *   GRALLOC1_ERROR_NO_RESOURCES - it is not possible to add a reference to this
+ *       buffer at this time
+ */
+typedef int32_t /*gralloc1_error_t*/ (*GRALLOC1_PFN_RETAIN)(
+        gralloc1_device_t* device, buffer_handle_t buffer);
+
+/* release(..., buffer)
+ * Function descriptor: GRALLOC1_FUNCTION_RELEASE
+ * Must be provided by all gralloc1 devices
+ *
+ * Removes a reference from the given buffer.
+ *
+ * If no references remain, the buffer should be freed. When the last buffer
+ * referring to a particular backing store is freed, that backing store should
+ * also be freed.
+ *
+ * Parameters:
+ *   buffer - the buffer from which a reference should be removed
+ *
+ * Returns GRALLOC1_ERROR_NONE or one of the following errors:
+ *   GRALLOC1_ERROR_BAD_HANDLE - the buffer handle is invalid
+ */
+typedef int32_t /*gralloc1_error_t*/ (*GRALLOC1_PFN_RELEASE)(
+        gralloc1_device_t* device, buffer_handle_t buffer);
+
+/*
+ * Buffer access functions
+ *
+ * All of these functions take as their first parameter a device pointer, so
+ * this parameter is omitted from the described parameter lists.
+ */
+
+typedef struct gralloc1_rect {
+    int32_t left;
+    int32_t top;
+    int32_t width;
+    int32_t height;
+} gralloc1_rect_t;
+
+/* getNumFlexPlanes(..., buffer, outNumPlanes)
+ * Function descriptor: GRALLOC1_FUNCTION_GET_NUM_FLEX_PLANES
+ * Must be provided by all gralloc1 devices
+ *
+ * Returns the number of flex layout planes which are needed to represent the
+ * given buffer. This may be used to efficiently allocate only as many plane
+ * structures as necessary before calling into lockFlex.
+ *
+ * If the given buffer cannot be locked as a flex format, this function may
+ * return GRALLOC1_ERROR_UNSUPPORTED (as lockFlex would).
+ *
+ * Parameters:
+ *   buffer - the buffers for which the number of planes should be queried
+ *   outNumPlanes - the number of flex planes required to describe the given
+ *       buffer; must be non-NULL
+ *
+ * Returns GRALLOC1_ERROR_NONE or one of the following errors:
+ *   GRALLOC1_ERROR_BAD_HANDLE - the buffer handle is invalid
+ *   GRALLOC1_ERROR_UNSUPPORTED - the buffer's format cannot be represented in a
+ *       flex layout
+ */
+typedef int32_t /*gralloc1_error_t*/ (*GRALLOC1_PFN_GET_NUM_FLEX_PLANES)(
+        gralloc1_device_t* device, buffer_handle_t buffer,
+        uint32_t* outNumPlanes);
+
+/* lock(..., buffer, producerUsage, consumerUsage, accessRegion, outData,
+ *     acquireFence)
+ * Function descriptor: GRALLOC1_FUNCTION_LOCK
+ * Must be provided by all gralloc1 devices
+ *
+ * Locks the given buffer for the specified CPU usage.
+ *
+ * Exactly one of producerUsage and consumerUsage must be *_USAGE_NONE. The
+ * usage which is not *_USAGE_NONE must be one of the *_USAGE_CPU_* values, as
+ * applicable. Locking a buffer for a non-CPU usage is not supported.
+ *
+ * Locking the same buffer simultaneously from multiple threads is permitted,
+ * but if any of the threads attempt to lock the buffer for writing, the
+ * behavior is undefined, except that it must not cause process termination or
+ * block the client indefinitely. Leaving the buffer content in an indeterminate
+ * state or returning an error are both acceptable.
+ *
+ * The client must not modify the content of the buffer outside of accessRegion,
+ * and the device need not guarantee that content outside of accessRegion is
+ * valid for reading. The result of reading or writing outside of accessRegion
+ * is undefined, except that it must not cause process termination.
+ *
+ * outData must be a non-NULL pointer, the contents of which which will be
+ * filled with a pointer to the locked buffer memory. This address will
+ * represent the top-left corner of the entire buffer, even if accessRegion does
+ * not begin at the top-left corner.
+ *
+ * acquireFence is a file descriptor referring to a acquire sync fence object,
+ * which will be signaled when it is safe for the device to access the contents
+ * of the buffer (prior to locking). If it is already safe to access the buffer
+ * contents, -1 may be passed instead.
+ *
+ * Parameters:
+ *   buffer - the buffer to lock
+ *   producerUsage - the producer usage flags to request; either this or
+ *       consumerUsage must be GRALLOC1_*_USAGE_NONE, and the other must be a
+ *       CPU usage
+ *   consumerUsage - the consumer usage flags to request; either this or
+ *       producerUsage must be GRALLOC1_*_USAGE_NONE, and the other must be a
+ *       CPU usage
+ *   accessRegion - the portion of the buffer that the client intends to access;
+ *       must be non-NULL
+ *   outData - will be filled with a CPU-accessible pointer to the buffer data;
+ *       must be non-NULL
+ *   acquireFence - a sync fence file descriptor as described above
+ *
+ * Returns GRALLOC1_ERROR_NONE or one of the following errors:
+ *   GRALLOC1_ERROR_BAD_HANDLE - the buffer handle is invalid
+ *   GRALLOC1_ERROR_BAD_VALUE - neither or both of producerUsage and
+ *       consumerUsage were GRALLOC1_*_USAGE_NONE, or the usage which was not
+ *       *_USAGE_NONE was not a CPU usage
+ *   GRALLOC1_ERROR_NO_RESOURCES - the buffer cannot be locked at this time, but
+ *       locking may succeed at a future time
+ *   GRALLOC1_ERROR_UNSUPPORTED - the buffer cannot be locked with the given
+ *       usage, and any future attempts at locking will also fail
+ */
+typedef int32_t /*gralloc1_error_t*/ (*GRALLOC1_PFN_LOCK)(
+        gralloc1_device_t* device, buffer_handle_t buffer,
+        uint64_t /*gralloc1_producer_usage_t*/ producerUsage,
+        uint64_t /*gralloc1_consumer_usage_t*/ consumerUsage,
+        const gralloc1_rect_t* accessRegion, void** outData,
+        int32_t acquireFence);
+
+/* lockFlex(..., buffer, producerUsage, consumerUsage, accessRegion,
+ *     outFlexLayout, outAcquireFence)
+ * Function descriptor: GRALLOC1_FUNCTION_LOCK_FLEX
+ * Must be provided by all gralloc1 devices
+ *
+ * This is largely the same as lock(), except that instead of returning a
+ * pointer directly to the buffer data, it returns an android_flex_layout
+ * struct describing how to access the data planes.
+ *
+ * This function must work on buffers with HAL_PIXEL_FORMAT_YCbCr_*_888 if
+ * supported by the device, as well as with any other formats requested by
+ * multimedia codecs when they are configured with a flexible-YUV-compatible
+ * color format.
+ *
+ * This function may also be called on buffers of other formats, including
+ * non-YUV formats, but if the buffer format is not compatible with a flexible
+ * representation, it may return GRALLOC1_ERROR_UNSUPPORTED.
+ *
+ * Parameters:
+ *   buffer - the buffer to lock
+ *   producerUsage - the producer usage flags to request; either this or
+ *       consumerUsage must be GRALLOC1_*_USAGE_NONE, and the other must be a
+ *       CPU usage
+ *   consumerUsage - the consumer usage flags to request; either this or
+ *       producerUsage must be GRALLOC1_*_USAGE_NONE, and the other must be a
+ *       CPU usage
+ *   accessRegion - the portion of the buffer that the client intends to access;
+ *      must be non-NULL
+ *   outFlexLayout - will be filled with the description of the planes in the
+ *       buffer
+ *   acquireFence - a sync fence file descriptor as described in lock()
+ *
+ * Returns GRALLOC1_ERROR_NONE or one of the following errors:
+ *   GRALLOC1_ERROR_BAD_HANDLE - the buffer handle is invalid
+ *   GRALLOC1_ERROR_BAD_VALUE - neither or both of producerUsage and
+ *       consumerUsage were *_USAGE_NONE, or the usage which was not
+ *       *_USAGE_NONE was not a CPU usage
+ *   GRALLOC1_ERROR_NO_RESOURCES - the buffer cannot be locked at this time, but
+ *       locking may succeed at a future time
+ *   GRALLOC1_ERROR_UNSUPPORTED - the buffer cannot be locked with the given
+ *       usage, and any future attempts at locking will also fail
+ */
+typedef int32_t /*gralloc1_error_t*/ (*GRALLOC1_PFN_LOCK_FLEX)(
+        gralloc1_device_t* device, buffer_handle_t buffer,
+        uint64_t /*gralloc1_producer_usage_t*/ producerUsage,
+        uint64_t /*gralloc1_consumer_usage_t*/ consumerUsage,
+        const gralloc1_rect_t* accessRegion,
+        struct android_flex_layout* outFlexLayout, int32_t acquireFence);
+
+/* unlock(..., buffer, releaseFence)
+ * Function descriptor: GRALLOC1_FUNCTION_UNLOCK
+ * Must be provided by all gralloc1 devices
+ *
+ * This function indicates to the device that the client will be done with the
+ * buffer when releaseFence signals.
+ *
+ * outReleaseFence will be filled with a file descriptor referring to a release
+ * sync fence object, which will be signaled when it is safe to access the
+ * contents of the buffer (after the buffer has been unlocked). If it is already
+ * safe to access the buffer contents, then -1 may be returned instead.
+ *
+ * This function is used to unlock both buffers locked by lock() and those
+ * locked by lockFlex().
+ *
+ * Parameters:
+ *   buffer - the buffer to unlock
+ *   outReleaseFence - a sync fence file descriptor as described above
+ *
+ * Returns GRALLOC1_ERROR_NONE or one of the following errors:
+ *   GRALLOC1_ERROR_BAD_HANDLE - the buffer handle is invalid
+ */
+typedef int32_t /*gralloc1_error_t*/ (*GRALLOC1_PFN_UNLOCK)(
+        gralloc1_device_t* device, buffer_handle_t buffer,
+        int32_t* outReleaseFence);
+
+__END_DECLS
+
+#endif