diff --git a/include/hardware/context_hub.h b/include/hardware/context_hub.h
new file mode 100644
index 0000000..01d2377
--- /dev/null
+++ b/include/hardware/context_hub.h
@@ -0,0 +1,288 @@
+/*
+ * Copyright (C) 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef CONTEXT_HUB_H
+#define CONTEXT_HUB_H
+
+#include <stdint.h>
+#include <sys/cdefs.h>
+#include <sys/types.h>
+
+#include <hardware/hardware.h>
+
+/**
+ * This header file defines the interface of a Context Hub Implementation to
+ * the Android service exposing Context hub capabilities to applications.
+ * The Context hub is expected to a low power compute domain with the following
+ * defining charecteristics -
+ *
+ *    1) Access to sensors like accelerometer, gyroscope, magenetometer.
+ *    2) Access to radios like GPS, Wifi, Bluetooth etc.
+ *    3) Access to low power audio sensing.
+ *
+ * Implementations of this HAL can add additional sensors not defined by the
+ * Android API. Such information sources shall be private to the implementation.
+ *
+ * The Context Hub HAL exposes the construct of code download. A piece of binary
+ * code can be pushed to the context hub through the supported APIs.
+ *
+ * This version of the HAL designs in the possibility of multiple context hubs.
+ */
+
+__BEGIN_DECLS
+
+/*****************************************************************************/
+
+#define CONTEXT_HUB_HEADER_VERSION          1
+#define CONTEXT_HUB_DEVICE_API_VERSION_1_0  HARDWARE_DEVICE_API_VERSION_2(1, 0, CONTEXT_HUB_HEADER_VERSION)
+
+/**
+ * The id of this module
+ */
+#define CONTEXT_HUB_MODULE_ID         "context_hub"
+
+/**
+ * Name of the device to open
+ */
+#define CONTEXT_HUB_HARDWARE_POLL     "ctxt_poll"
+
+/**
+ * Memory types for code upload. Device-specific. At least HUB_MEM_TYPE_MAIN must be supported
+ */
+#define HUB_MEM_TYPE_MAIN             0
+#define HUB_MEM_TYPE_SECONDARY        1
+#define HUB_MEM_TYPE_TCM              2
+
+
+#define HUB_MEM_TYPE_FIRST_VENDOR     0x80000000ul
+
+
+/**
+ * Other memory types (likely not writeable, informational only)
+ */
+#define HUB_MEM_TYPE_BOOTLOADER       0xfffffffful
+#define HUB_MEM_TYPE_OS               0xfffffffeul
+#define HUB_MEM_TYPE_EEDATA           0xfffffffdul
+#define HUB_MEM_TYPE_RAM              0xfffffffcul
+
+/**
+ * Types of memory blocks on the context hub
+ * */
+#define MEM_FLAG_READ  0x1  // Memory can be written to
+#define MEM_FLAG_WRITE 0x2  // Memory can be written to
+#define MEM_FLAG_EXEC  0x4  // Memory can be executed from
+
+/**
+ * The following structure defines each memory block in detail
+ */
+struct mem_range_t {
+    uint32_t total_bytes;
+    uint32_t free_bytes;
+    uint32_t type;        // HUB_MEM_TYPE_*
+    uint32_t mem_flags;   // MEM_FLAG_*
+};
+
+
+/**
+ * App names may be strings, bytes, uints, etc. This caovers all types of app names
+ */
+struct hub_app_name_t {
+    uint32_t app_name_len;
+    const void *app_name;
+};
+
+struct hub_app_info {
+    const struct hub_app_name_t *name;
+    uint32_t version;
+    uint32_t num_mem_ranges;
+    const struct mem_range_t *mem_usage;
+};
+
+/**
+ * Following enum defines the types of sensors that a hub may declare support
+ * for. Declaration for support would mean that the hub can access and process
+ * data from that particular sensor type.
+ */
+
+typedef enum {
+    CONTEXT_SENSOR_RESERVED,             // 0
+    CONTEXT_SENSOR_ACCELEROMETER,        // 1
+    CONTEXT_SENSOR_GYROSCOPE,            // 2
+    CONTEXT_SENSOR_MAGNETOMETER,         // 3
+    CONTEXT_SENSOR_BAROMETER,            // 4
+    CONTEXT_SENSOR_PROXIMITY_SENSOR,     // 5
+    CONTEXT_SENSOR_AMBIENT_LIGHT_SENSOR, // 6
+
+    CONTEXT_SENSOR_GPS = 0x100,          // 0x100
+    // Reserving this space for variants on GPS
+    CONTEXT_SENSOR_WIFI = 0x200,         // 0x200
+    // Reserving this space for variants on WIFI
+    CONTEXT_SENSOR_AUDIO = 0x300,        // 0x300
+    // Reserving this space for variants on Audio
+    CONTEXT_SENSOR_CAMERA = 0x400,       // 0x400
+    // Reserving this space for variants on Camera
+    CONTEXT_SENSOR_BLE = 0x500,          // 0x500
+
+    CONTEXT_SENSOR_MAX = 0xffffffff,     //make sure enum size is set
+} context_sensor_e;
+
+/**
+ * Sensor types beyond CONTEXT_HUB_TYPE_PRIVATE_SENSOR_BASE are custom types
+ */
+#define CONTEXT_HUB_TYPE_PRIVATE_SENSOR_BASE 0x10000
+
+/**
+ * The following structure describes a sensor
+ */
+struct physical_sensor_description_t {
+    uint32_t sensor_type;           // From the definitions above eg: 100
+    const char *type_string;        // Type as a string. eg: "GPS"
+    const char *name;               // Identifier eg: "Bosch BMI160"
+    const char *vendor;             // Vendor : eg "STM"
+    uint32_t version;               // Version : eg 0x1001
+    uint32_t fifo_reserverd_count;  // Batching possible in hardware. Please
+                                    // note that here hardware does not include
+                                    // the context hub itslef. Thus, this
+                                    // definition may be different from say the
+                                    // number advertised in the sensors HAL
+                                    // which allows for batching in a hub.
+    uint32_t fifo_max_count;        // maximum number of batchable events.
+    uint64_t min_delay_ms;          // in milliseconds, corresponding to highest
+                                    // sampling freq.
+    uint64_t max_delay_ms;          // in milliseconds, corresponds to minimum
+                                    // sampling frequency
+    float peak_power_mw;            // At max frequency & no batching, power
+                                    // in milliwatts
+};
+
+struct connected_sensor_t {
+    uint32_t sensor_id;             // identifier for this sensor
+
+    /* This union may be extended to other sensor types */
+    union {
+        struct physical_sensor_description_t physical_sensor;
+    };
+};
+
+
+
+/**
+ * Messages of this length or less must be supported by all implementations,
+ * longer lengths are supported up to max_supported_msg_len. This is exposed
+ * to third party apps, and since we do not know their msg data formats we
+ * cannot fragment for them. Our own messages are allowed to be bigger and
+ * this HAL will fragment as needed. "Our own" messages are messaegs defined
+ * in this file.
+ */
+#define HUB_REQUIRED_SUPPORTED_MSG_LEN  128
+
+struct hub_message_t {
+    const struct hub_app_name_t *app; /* To/From this nanoapp */
+    uint32_t message_type;
+    uint32_t message_len;
+    const void *message;
+};
+
+
+/**
+ * Definition of a context hub. A device may contain more than one low
+ * power domain. In that case, please add an entry for each hub. However,
+ * it is perfectly OK for a device to declare one context hub and manage
+ * them internally as several
+ */
+
+struct context_hub_t {
+    const char *name;                // descriptive name eg: "Awesome Hub #1"
+    const char *vendor;              // hub hardware vendor eg: "Qualcomm"
+    const char *toolchain;           // toolchain to make binaries eg:"gcc ARM"
+    uint32_t platform_version;       // Version of the hardware : eg 0x20
+    uint32_t toolchain_version;      // Version of the toolchain : eg: 0x484
+    uint32_t hub_id;                 // a device unique id for this hub
+
+    float peak_mips;                 // Peak MIPS platform can deliver
+    float stopped_power_draw_mw;     // if stopped, retention power, milliwatts
+    float sleep_power_draw_mw;       // if sleeping, retention power, milliwatts
+    float peak_power_draw_mw;        // for a busy CPUm power in milliwatts
+
+    const struct connected_sensor_t *connected_sensors; // array of connected sensors
+    uint32_t num_connected_sensors;  // number of connected sensors
+
+    uint32_t max_supported_msg_len;
+    const struct hub_app_name_t *os_app_name; /* send msgs here for OS functions */
+};
+
+/**
+ * All communication between the context hubs and the Context Hub Service is in
+ * the form of messages. Some message types are distinguished and their
+ * Semantics shall be well defined.
+ * Custom message types should be defined starting above
+ * CONTEXT_HUB_PRIVATE_MSG_BASE
+ */
+
+typedef enum {
+    CONTEXT_HUB_APPS_ENABLE = 1, // 1: Enables the loaded nano-apps
+    CONTEXT_HUB_APPS_DISABLE,    // 2: Disables any loaded nano-apps
+    CONTEXT_HUB_LOAD_APP,        // 3: Load a supplied app
+    CONTEXT_HUB_UNLOAD_APP,      // 4: Unload a specified app
+    CONTEXT_HUB_QUERY_APPS,      // 5: Query for apps info on hub (gets struct hub_app_info[])
+    CONTEXT_HUB_QUERY_MEMORY,    // 5: Query for memory info (gets struct mem_range_t[])
+    CONTEXT_HUB_LOAD_OS,         // 6: Load up OS update
+} hub_messages_e;
+
+#define CONTEXT_HUB_TYPE_PRIVATE_MSG_BASE 0x10000
+
+
+/**
+ * A callback registers with the context hub service to pass messages
+ * coming from the hub to the service/clients.
+ */
+typedef int context_hub_callback(uint32_t hub_id, const struct hub_message_t *rxed_msg, void *cookie);
+
+
+/**
+ * Every hardware module must have a data structure named HAL_MODULE_INFO_SYM
+ * and the fields of this data structure must begin with hw_module_t
+ * followed by module specific information.
+ */
+struct context_hub_module_t {
+    struct hw_module_t common;
+
+    /**
+     * Enumerate all available hubs.The list is returned in "list".
+     * @return result : 0 if successful, error code otherwise
+     *
+     * This method shall be called at device bootup.
+     */
+    int (*get_hubs)(struct context_hub_module_t* module, const struct context_hub_t ** list);
+
+    /**
+     * Registers a callback for the HAL implementation to communicate
+     * with the context hub service.
+     * @return result : 0 if successful, error code otherwise
+     */
+    int (*subscribe_messages)(uint32_t hub_id, context_hub_callback cbk, void *cookie);
+
+    /**
+     * Send a message to a hub
+     * @return result : 0 if successful, error code otherwise
+     */
+    int (*send_message)(uint32_t hub_id, const struct hub_message_t *msg);
+
+};
+
+__END_DECLS
+
+#endif  // CONTEXT_HUB_SENSORS_INTERFACE_H