Merge \\\\"[qemu]: Remove qemu_pipe.h and qemud.h headers.\\\\" am: 851f91adce am: 45e04a28bb am: b3e49e2257
am: 22d0f556fb
Change-Id: I194da0307836bc88a06d18cb7ba3e9240a3a6358
diff --git a/include/hardware/fingerprint.h b/include/hardware/fingerprint.h
index 618ca7e..e7c825f 100644
--- a/include/hardware/fingerprint.h
+++ b/include/hardware/fingerprint.h
@@ -18,10 +18,12 @@
#define ANDROID_INCLUDE_HARDWARE_FINGERPRINT_H
#include <hardware/hw_auth_token.h>
+#include <hardware/hardware.h>
#define FINGERPRINT_MODULE_API_VERSION_1_0 HARDWARE_MODULE_API_VERSION(1, 0)
#define FINGERPRINT_MODULE_API_VERSION_2_0 HARDWARE_MODULE_API_VERSION(2, 0)
#define FINGERPRINT_MODULE_API_VERSION_2_1 HARDWARE_MODULE_API_VERSION(2, 1)
+#define FINGERPRINT_MODULE_API_VERSION_3_0 HARDWARE_MODULE_API_VERSION(3, 0)
#define FINGERPRINT_HARDWARE_MODULE_ID "fingerprint"
typedef enum fingerprint_msg_type {
@@ -84,14 +86,13 @@
uint64_t msg; /* Vendor specific message. Used for user guidance */
} fingerprint_enroll_t;
-typedef struct fingerprint_enumerated {
+typedef struct fingerprint_iterator {
fingerprint_finger_id_t finger;
uint32_t remaining_templates;
-} fingerprint_enumerated_t;
+} fingerprint_iterator_t;
-typedef struct fingerprint_removed {
- fingerprint_finger_id_t finger;
-} fingerprint_removed_t;
+typedef fingerprint_iterator_t fingerprint_enumerated_t;
+typedef fingerprint_iterator_t fingerprint_removed_t;
typedef struct fingerprint_acquired {
fingerprint_acquired_info_t acquired_info; /* information about the image */
@@ -206,7 +207,7 @@
/*
* Enumerate all the fingerprint templates found in the directory set by
* set_active_group()
- * For each template found notify() will be called with:
+ * For each template found a notify() will be called with:
* fingerprint_msg.type == FINGERPRINT_TEMPLATE_ENUMERATED
* fingerprint_msg.data.enumerated.finger indicating a template id
* fingerprint_msg.data.enumerated.remaining_templates indicating how many more
@@ -221,9 +222,14 @@
* Fingerprint remove request:
* Deletes a fingerprint template.
* Works only within the path set by set_active_group().
- * notify() will be called with details on the template deleted.
- * fingerprint_msg.type == FINGERPRINT_TEMPLATE_REMOVED and
- * fingerprint_msg.data.removed.finger indicating the template id removed.
+ * The fid parameter can be used as a widcard:
+ * * fid == 0 -- delete all the templates in the group.
+ * * fid != 0 -- delete this specific template from the group.
+ * For each template found a notify() will be called with:
+ * fingerprint_msg.type == FINGERPRINT_TEMPLATE_REMOVED
+ * fingerprint_msg.data.removed.finger indicating a template id deleted
+ * fingerprint_msg.data.removed.remaining_templates indicating how many more
+ * templates will be deleted by this operation.
*
* Function return: 0 if fingerprint template(s) can be successfully deleted
* or a negative number in case of error, generally from the errno.h set.
diff --git a/include/hardware/vehicle.h b/include/hardware/vehicle.h
index a590fbd..ac7e470 100644
--- a/include/hardware/vehicle.h
+++ b/include/hardware/vehicle.h
@@ -122,7 +122,7 @@
* @data_member info_model_year
* @unit VEHICLE_UNIT_TYPE_YEAR
*/
-#define VEHICLE_PROPERTY_INFO_MODEL_YEAR (0x00000103)
+#define VEHICLE_PROPERTY_INFO_MODEL_YEAR (0x00000103)
/**
* Fuel capacity of the vehicle
@@ -293,7 +293,7 @@
/**
* HVAC current temperature.
* @value_type VEHICLE_VALUE_TYPE_ZONED_FLOAT
- * @change_mode VEHICLE_PROP_CHANGE_MODE_ON_CHANGE|VEHICLE_PROP_CHANGE_MODE_CONTINUOUS
+ * @change_mode VEHICLE_PROP_CHANGE_MODE_ON_CHANGE
* @access VEHICLE_PROP_ACCESS_READ_WRITE
* @zone_type VEHICLE_ZONE
* @data_member hvac.temperature_current
@@ -303,7 +303,7 @@
/**
* HVAC, target temperature set.
* @value_type VEHICLE_VALUE_TYPE_ZONED_FLOAT
- * @change_mode VEHICLE_PROP_CHANGE_MODE_ON_CHANGE|VEHICLE_PROP_CHANGE_MODE_CONTINUOUS
+ * @change_mode VEHICLE_PROP_CHANGE_MODE_ON_CHANGE
* @access VEHICLE_PROP_ACCESS_READ_WRITE
* @zone_type VEHICLE_ZONE
* @data_member hvac.temperature_set
@@ -373,6 +373,16 @@
#define VEHICLE_PROPERTY_HVAC_DUAL_ON (0x00000509)
/**
+ * On/off automatic mode
+ * @value_type VEHICLE_VALUE_TYPE_ZONED_BOOLEAN
+ * @change_mode VEHICLE_PROP_CHANGE_MODE_ON_CHANGE
+ * @access VEHICLE_PROP_ACCESS_READ_WRITE
+ * @zone_type VEHICLE_ZONE
+ * @data_member hvac.auto_on
+ */
+#define VEHICLE_PROPERTY_HVAC_AUTO_ON (0x0000050A)
+
+/**
* Represents power state for HVAC. Some HVAC properties will require matching power to be turned on
* to get out of OFF state. For non-zoned HVAC properties, VEHICLE_ALL_ZONE corresponds to
* global power state.
@@ -396,8 +406,7 @@
* @data_member outside_temperature
* @unit VEHICLE_UNIT_TYPE_CELCIUS
*/
-
-#define VEHICLE_PROPERTY_ENV_OUTSIDE_TEMPERATURE (0x00000703)
+#define VEHICLE_PROPERTY_ENV_OUTSIDE_TEMPERATURE (0x00000703)
/**
@@ -408,7 +417,7 @@
* @data_member cabin_temperature
* @unit VEHICLE_UNIT_TYPE_CELCIUS
*/
-#define VEHICLE_PROPERTY_ENV_CABIN_TEMPERATURE (0x00000704)
+#define VEHICLE_PROPERTY_ENV_CABIN_TEMPERATURE (0x00000704)
/*
@@ -434,7 +443,7 @@
* @config_flags Number of presets supported
* @data_member int32_array
*/
-#define VEHICLE_PROPERTY_RADIO_PRESET (0x0000801)
+#define VEHICLE_PROPERTY_RADIO_PRESET (0x0000801)
/**
* Constants relevant to radio.
@@ -492,7 +501,13 @@
* VEHICLE_AUDIO_EXT_FOCUS_CAR_PERMANENT when car side is playing something
* permanent.
* LOSS_TRANSIENT: always should be VEHICLE_AUDIO_EXT_FOCUS_CAR_TRANSIENT
- * int32_array[3]: should be zero.
+ * int32_array[3]: context requested by android side when responding to focus request.
+ * When car side is taking focus away, this should be zero.
+ *
+ * A focus response should be sent per each focus request even if there is no change in
+ * focus state. This can happen in case like focus request only involving context change
+ * where android side still needs matching focus response to confirm that audio module
+ * has made necessary changes.
*
* If car does not support VEHICLE_PROPERTY_AUDIO_FOCUS, focus is assumed to be granted always.
*
@@ -501,7 +516,7 @@
* @access VEHICLE_PROP_ACCESS_READ_WRITE
* @data_member int32_array
*/
-#define VEHICLE_PROPERTY_AUDIO_FOCUS (0x00000900)
+#define VEHICLE_PROPERTY_AUDIO_FOCUS (0x00000900)
enum vehicle_audio_focus_request {
VEHICLE_AUDIO_FOCUS_REQUEST_GAIN = 0x1,
@@ -643,8 +658,16 @@
/**
* Property to control audio volume of each audio context.
*
+ * vehicle_prop_config_t
+ * config_array[0] : bit flags of all supported audio contexts. If this is 0,
+ * audio volume is controlled per physical stream
+ * config_array[1] : flags defined in vehicle_audio_volume_capability_flag to
+ * represent audio module's capability.
+ *
* Data type looks like:
- * int32_array[0] : stream context as defined in vehicle_audio_context_flag.
+ * int32_array[0] : stream context as defined in vehicle_audio_context_flag. If only physical
+ stream is supported (config_array[0] == 0), this will represent physical
+ stream number.
* int32_array[1] : volume level, valid range is 0 to int32_max_value defined in config.
* 0 will be mute state. int32_min_value in config should be always 0.
* int32_array[2] : One of vehicle_audio_volume_state.
@@ -658,7 +681,29 @@
* @config_flags all audio contexts supported.
* @data_member int32_array
*/
-#define VEHICLE_PROPERTY_AUDIO_VOLUME (0x00000901)
+#define VEHICLE_PROPERTY_AUDIO_VOLUME (0x00000901)
+
+
+/**
+ * flags to represent capability of audio volume property.
+ * used in config_array[1] of vehicle_prop_config_t.
+ */
+enum vehicle_audio_volume_capability_flag {
+ /**
+ * External audio module or vehicle hal has persistent storage
+ * to keep the volume level. This should be set only when per context
+ * volume level is supproted. When this is set, audio volume level per
+ * each context will be retrieved from the property when systen starts up.
+ * And external audio module is also expected to adjust volume automatically
+ * whenever there is an audio context change.
+ * When this flag is not set, android side will assume that there is no
+ * persistent storage and stored value in android side will be used to
+ * initialize the volume level. And android side will set volume level
+ * of each physical streams whenever there is an audio context change.
+ */
+ VEHICLE_AUDIO_VOLUME_CAPABILITY_PERSISTENT_STORAGE = 0x1,
+};
+
/**
* enum to represent audio volume state.
@@ -683,8 +728,18 @@
/**
* Property for handling volume limit set by user. This limits maximum volume that can be set
- * per each context.
- * int32_array[0] : stream context as defined in vehicle_audio_context_flag.
+ * per each context or physical stream.
+ *
+ * vehicle_prop_config_t
+ * config_array[0] : bit flags of all supported audio contexts. If this is 0,
+ * audio volume is controlled per physical stream
+ * config_array[1] : flags defined in vehicle_audio_volume_capability_flag to
+ * represent audio module's capability.
+ *
+ * Data type looks like:
+ * int32_array[0] : stream context as defined in vehicle_audio_context_flag. If only physical
+ * stream is supported (config_array[0] == 0), this will represent physical
+ * stream number.
* int32_array[1] : maximum volume set to the stream. If there is no restriction, this value
* will be bigger than VEHICLE_PROPERTY_AUDIO_VOLUME's max value.
*
@@ -698,7 +753,7 @@
* @config_flags all audio contexts supported.
* @data_member int32_array
*/
-#define VEHICLE_PROPERTY_AUDIO_VOLUME_LIMIT (0x00000902)
+#define VEHICLE_PROPERTY_AUDIO_VOLUME_LIMIT (0x00000902)
/**
* Index in int32_array for VEHICLE_PROPERTY_AUDIO_VOLUME_LIMIT property.
@@ -727,7 +782,7 @@
* @access VEHICLE_PROP_ACCESS_WRITE
* @data_member int32_array
*/
-#define VEHICLE_PROPERTY_AUDIO_ROUTING_POLICY (0x00000903)
+#define VEHICLE_PROPERTY_AUDIO_ROUTING_POLICY (0x00000903)
/**
* Index in int32_array for VEHICLE_PROPERTY_AUDIO_ROUTING_POLICY property.
@@ -750,7 +805,7 @@
* this.
* @data_member int32_value
*/
-#define VEHICLE_PROPERTY_AUDIO_HW_VARIANT (0x00000904)
+#define VEHICLE_PROPERTY_AUDIO_HW_VARIANT (0x00000904)
/**
* Flag to be used in vehicle_prop_config.config_flags for VEHICLE_PROPERTY_AUDIO_HW_VARIANT.
@@ -788,7 +843,7 @@
* @config_flags Additional info on power state. Should use vehicle_ap_power_state_config_flag.
* @data_member int32_array
*/
-#define VEHICLE_PROPERTY_AP_POWER_STATE (0x00000A00)
+#define VEHICLE_PROPERTY_AP_POWER_STATE (0x00000A00)
enum vehicle_ap_power_state_config_flag {
/**
@@ -895,7 +950,7 @@
* @access VEHICLE_PROP_ACCESS_READ|VEHICLE_PROP_ACCESS_READ_WRITE
* @data_member int32
*/
-#define VEHICLE_PROPERTY_DISPLAY_BRIGHTNESS (0x00000A01)
+#define VEHICLE_PROPERTY_DISPLAY_BRIGHTNESS (0x00000A01)
/**
@@ -999,7 +1054,7 @@
* @config_array 0:vehicle_instument_cluster_type 1:hw type
* @data_member int32_array
*/
-#define VEHICLE_PROPERTY_INSTRUMENT_CLUSTER_INFO (0x00000A20)
+#define VEHICLE_PROPERTY_INSTRUMENT_CLUSTER_INFO (0x00000A20)
/**
* Represents instrument cluster type available in system
@@ -1019,6 +1074,83 @@
};
/**
+ * Current date and time, encoded as Unix time.
+ * This value denotes the number of seconds that have elapsed since 1/1/1970.
+ *
+ * @value_type VEHICLE_VALUE_TYPE_INT64
+ * @change_mode VEHICLE_PROP_CHANGE_MODE_ON_SET
+ * @access VEHICLE_PROP_ACCESS_READ_WRITE
+ * @data_member int64_value
+ * @unit VEHICLE_UNIT_TYPE_SECS
+ */
+#define VEHICLE_PROPERTY_UNIX_TIME (0x00000A30)
+
+/**
+ * Current time only.
+ * Some vehicles may not keep track of date. This property only affects the current time, in
+ * seconds during the day. Thus, the max value for this parameter is 86,400 (24 * 60 * 60)
+ *
+ * @value_type VEHICLE_VALUE_TYPE_INT32
+ * @change_mode VEHICLE_PROP_CHANGE_MODE_ON_SET
+ * @access VEHICLE_PROP_ACCESS_READ_WRITE
+ * @data_member int32_value
+ * @unit VEHICLE_UNIT_TYPE_SECS
+ */
+#define VEHICLE_PROPERTY_CURRENT_TIME_IN_SECONDS (0x00000A31)
+
+/**
+ * Seat temperature
+ *
+ * Negative values indicate cooling.
+ * 0 indicates off.
+ * Positive values indicate heating.
+ *
+ * Some vehicles may have multiple levels of heating and cooling. The min/max
+ * range defines the allowable range and number of steps in each direction.
+ *
+ * @value_type VEHICLE_VALUE_TYPE_ZONED_INT32
+ * @change_mode VEHICLE_PROP_CHANGE_MODE_ON_CHANGE
+ * @access VEHICLE_PROP_ACCESS_WRITE
+ * @zone_type VEHICLE_SEAT
+ * @data_member int32_value
+ */
+#define VEHICLE_PROPERTY_SEAT_TEMPERATURE (0x00000B00)
+
+/**
+ * Seat memory
+ *
+ * This parameter selects the memory preset to use to select the seat position.
+ * The minValue is always 0, and the maxValue determines the number of seat
+ * positions available.
+ *
+ * For instance, if the driver's seat has 3 memory presets, the maxValue will be 3.
+ * When the user wants to select a preset, the desired preset number (1, 2, or 3)
+ * is set.
+ *
+ * @value_type VEHICLE_VALUE_TYPE_ZONED_INT32
+ * @change_mode VEHICLE_PROP_CHANGE_MODE_ON_CHANGE
+ * @access VEHICLE_PROP_ACCESS_WRITE
+ * @zone_type VEHICLE_SEAT
+ * @data_member int32_value
+ */
+#define VEHICLE_PROPERTY_SEAT_MEMORY_SELECT (0x00000B01)
+
+/**
+ * Seat memory set
+ *
+ * This setting allows the user to save the current seat position settings into
+ * the selected preset slot. The maxValue for each seat position shall match
+ * the maxValue for VEHICLE_PROPERTY_SEAT_MEMORY_SELECT.
+ *
+ * @value_type VEHICLE_VALUE_TYPE_ZONED_INT32
+ * @change_mode VEHICLE_PROP_CHANGE_MODE_ON_CHANGE
+ * @access VEHICLE_PROP_ACCESS_WRITE
+ * @zone_type VEHICLE_SEAT
+ * @data_member int32_value
+ */
+#define VEHICLE_PROPERTY_SEAT_MEMORY_SET (0x00000B02)
+
+/**
* H/W specific, non-standard property can be added as necessary. Such property should use
* property number in range of [VEHICLE_PROPERTY_CUSTOM_START, VEHICLE_PROPERTY_CUSTOM_END].
* Definition of property in this range is completely up to each HAL implementation.
@@ -1027,20 +1159,20 @@
* include config_string of "com.XYZ.some_further_details".
* @range_start
*/
-#define VEHICLE_PROPERTY_CUSTOM_START (0x70000000)
+#define VEHICLE_PROPERTY_CUSTOM_START (0x70000000)
/** @range_end */
-#define VEHICLE_PROPERTY_CUSTOM_END (0x73ffffff)
+#define VEHICLE_PROPERTY_CUSTOM_END (0x73ffffff)
/**
* Property range allocated for system's internal usage like testing. HAL should never declare
* property in this range.
* @range_start
*/
-#define VEHICLE_PROPERTY_INTERNAL_START (0x74000000)
+#define VEHICLE_PROPERTY_INTERNAL_START (0x74000000)
/**
* @range_end
*/
-#define VEHICLE_PROPERTY_INTERNAL_END (0x74ffffff)
+#define VEHICLE_PROPERTY_INTERNAL_END (0x74ffffff)
/**
* Value types for various properties.
@@ -1091,7 +1223,7 @@
VEHICLE_UNIT_TYPE_MILLILITER = 0x00000040,
// time
VEHICLE_UNIT_TYPE_NANO_SECS = 0x00000050,
- VEHICLE_UNOT_TYPE_SECS = 0x00000053,
+ VEHICLE_UNIT_TYPE_SECS = 0x00000053,
VEHICLE_UNIT_TYPE_YEAR = 0x00000059,
};
@@ -1105,8 +1237,12 @@
*/
VEHICLE_PROP_CHANGE_MODE_STATIC = 0x00,
/**
- * Property of this type will be reported when there is a change. get should return the
- * current value.
+ * Property of this type will be reported when there is a change.
+ * get call should return the current value.
+ * Set operation for this property is assumed to be asynchronous. When the property is read
+ * (=get) after set, it may still return old value until underlying H/W backing this property
+ * has actually changed the state. Once state is changed, the property will dispatch changed
+ * value as event.
*/
VEHICLE_PROP_CHANGE_MODE_ON_CHANGE = 0x01,
/**
@@ -1114,6 +1250,18 @@
* the data.
*/
VEHICLE_PROP_CHANGE_MODE_CONTINUOUS = 0x02,
+ /**
+ * Property of this type may be polled to get the current value.
+ */
+ VEHICLE_PROP_CHANGE_MODE_POLL = 0x03,
+ /**
+ * This is for property where change event should be sent only when the value is
+ * set from external component. Normal value change will not trigger event.
+ * For example, clock property can send change event only when it is set, outside android,
+ * for case like user setting time or time getting update. There is no need to send it
+ * per every value change.
+ */
+ VEHICLE_PROP_CHANGE_MODE_ON_SET = 0x04,
};
/**
@@ -1468,6 +1616,7 @@
vehicle_boolean_t max_defrost_on;
vehicle_boolean_t recirc_on;
vehicle_boolean_t dual_on;
+ vehicle_boolean_t auto_on;
vehicle_boolean_t power_on;
float temperature_current;