diff --git a/include/hardware/vehicle.h b/include/hardware/vehicle.h
index 22c69bb..b08dd91 100644
--- a/include/hardware/vehicle.h
+++ b/include/hardware/vehicle.h
@@ -67,6 +67,9 @@
  * @data_member: Name of member from vehicle_value union to access this data.
  * @data_enum: enum type that should be used for the data.
  * @unit: Unit of data. Should be from vehicle_unit_type.
+ * @config_flags: Usage of config_flags in vehicle_prop_config
+ * @config_array: Usage of config_array in vehicle_prop_config. When this is specified,
+ *                @config_flags will not be used.
  * @config_string: Explains the usage of config_string in vehicle_prop_config. Property with
  *                 this annotation is expected to have additional information in config_string
  *                 for that property to work.
@@ -253,6 +256,7 @@
  * @value_type VEHICLE_VALUE_TYPE_ZONED_INT32
  * @change_mode VEHICLE_PROP_CHANGE_MODE_ON_CHANGE
  * @access VEHICLE_PROP_ACCESS_READ_WRITE
+ * @config_flags Supported zones
  * @data_member hvac.fan_speed
  * @data_enum TODO
  */
@@ -263,6 +267,7 @@
  * @value_type VEHICLE_VALUE_TYPE_ZONED_INT32
  * @change_mode VEHICLE_PROP_CHANGE_MODE_ON_CHANGE
  * @access VEHICLE_PROP_ACCESS_READ_WRITE
+ * @config_flags Supported zones
  * @data_member hvac.fan_direction
  * @data_enum TODO
  */
@@ -272,8 +277,9 @@
  * Bit flags for fan direction
  */
 enum vehicle_hvac_fan_direction_flags {
-    VEHICLE_HVAC_FAN_DIRECTION_FACE_FLAG    = 0x1,
-    VEHICLE_HVAC_FAN_DIRECTION_FLOOR_FLAG   = 0x2
+    VEHICLE_HVAC_FAN_DIRECTION_FACE_FLAG            = 0x1,
+    VEHICLE_HVAC_FAN_DIRECTION_FLOOR_FLAG           = 0x2,
+    VEHICLE_HVAC_FAN_DIRECTION_FACE_AND_FLOOR_FLAG  = 0x3
 };
 
 /**
@@ -281,6 +287,7 @@
  * @value_type VEHICLE_VALUE_TYPE_ZONED_FLOAT
  * @change_mode VEHICLE_PROP_CHANGE_MODE_ON_CHANGE|VEHICLE_PROP_CHANGE_MODE_CONTINUOUS
  * @access VEHICLE_PROP_ACCESS_READ_WRITE
+ * @config_flags Supported zones
  * @data_member hvac.temperature_current
  */
 #define VEHICLE_PROPERTY_HVAC_TEMPERATURE_CURRENT                   (0x00000502)
@@ -289,6 +296,7 @@
  * HVAC, target temperature set.
  * @value_type VEHICLE_VALUE_TYPE_ZONED_FLOAT
  * @change_mode VEHICLE_PROP_CHANGE_MODE_ON_CHANGE|VEHICLE_PROP_CHANGE_MODE_CONTINUOUS
+ * @config_flags Supported zones
  * @access VEHICLE_PROP_ACCESS_READ_WRITE
  * @data_member hvac.temperature_set
  */
@@ -299,6 +307,7 @@
  * @value_type VEHICLE_VALUE_TYPE_ZONED_BOOLEAN
  * @change_mode VEHICLE_PROP_CHANGE_MODE_ON_CHANGE
  * @access VEHICLE_PROP_ACCESS_READ_WRITE
+ * @config_flags Supported zones
  * @data_member hvac.defrost_on
  */
 #define VEHICLE_PROPERTY_HVAC_DEFROSTER                             (0x00000504)
@@ -308,6 +317,7 @@
  * @value_type VEHICLE_VALUE_TYPE_ZONED_BOOLEAN
  * @change_mode VEHICLE_PROP_CHANGE_MODE_ON_CHANGE
  * @access VEHICLE_PROP_ACCESS_READ_WRITE
+ * @config_flags Supported zones
  * @data_member hvac.ac_on
  */
 #define VEHICLE_PROPERTY_HVAC_AC_ON                                 (0x00000505)
@@ -379,6 +389,7 @@
  * @value_type VEHICLE_VALUE_TYPE_INT32_VEC4
  * @change_mode VEHICLE_PROP_CHANGE_MODE_ON_CHANGE
  * @access VEHICLE_PROP_ACCESS_READ_WRITE
+ * @config_flags Number of presets supported
  * @data_member int32_array
  */
 #define VEHICLE_PROPERTY_RADIO_PRESET                               (0x0000801)
@@ -529,10 +540,10 @@
 };
 
 /**
- * Property to control audio volume of each stream.
+ * Property to control audio volume of each audio context.
  *
  * Data type looks like:
- *   int32_array[0] : stream number (not bit flag) like VEHICLE_AUDIO_STREAM0.
+ *   int32_array[0] : stream context as defined in vehicle_audio_context_flag.
  *   int32_array[1] : volume level, valid range is 0 to int32_max_value defined in config.
  *                    0 will be mute state. int32_min_value in config should be always 0.
  *   int32_array[2] : One of vehicle_audio_volume_state.
@@ -543,6 +554,7 @@
  * @value_type VEHICLE_VALUE_TYPE_INT32_VEC3
  * @change_mode VEHICLE_PROP_CHANGE_MODE_ON_CHANGE
  * @access VEHICLE_PROP_ACCESS_READ_WRITE
+ * @config_flags all audio contexts supported.
  * @data_member int32_array
  */
 #define VEHICLE_PROPERTY_AUDIO_VOLUME                                 (0x00000901)
@@ -570,8 +582,8 @@
 
 /**
  * Property for handling volume limit set by user. This limits maximum volume that can be set
- * per each volume.
- *   int32_array[0] : stream number (not bit flag) like VEHICLE_AUDIO_STREAM0.
+ * per each context.
+ *   int32_array[0] : stream context as defined in vehicle_audio_context_flag.
  *   int32_array[1] : maximum volume set to the stream. If there is no restriction, this value
  *                    will be  bigger than VEHICLE_PROPERTY_AUDIO_VOLUME's max value.
  *
@@ -582,6 +594,7 @@
  * @value_type VEHICLE_VALUE_TYPE_INT32_VEC2
  * @change_mode VEHICLE_PROP_CHANGE_MODE_ON_CHANGE
  * @access VEHICLE_PROP_ACCESS_READ_WRITE
+ * @config_flags all audio contexts supported.
  * @data_member int32_array
  */
 #define VEHICLE_PROPERTY_AUDIO_VOLUME_LIMIT                           (0x00000902)
@@ -602,8 +615,8 @@
  *   int32_array[0] : audio stream where the audio for the application context will be routed
  *                    by default. Note that this is the default setting from system, but each app
  *                    may still use different audio stream for whatever reason.
- *   int32_array[1] : All application contexts that will be sent through the physical stream. Flag
- *                    is defined in vehicle_app_context_flag.
+ *   int32_array[1] : All audio contexts that will be sent through the physical stream. Flag
+ *                    is defined in vehicle_audio_context_flag.
 
  * Setting of this property will be done for all available physical streams based on audio H/W
  * variant information acquired from VEHICLE_PROPERTY_AUDIO_HW_VARIANT property.
@@ -632,6 +645,8 @@
 * @value_type VEHICLE_VALUE_TYPE_INT32
 * @change_mode VEHICLE_PROP_CHANGE_MODE_STATIC
 * @access VEHICLE_PROP_ACCESS_READ
+* @config_flags Additional info on audio H/W. Should use vehicle_audio_hw_variant_config_flag for
+*               this.
 * @data_member int32_value
 */
 #define VEHICLE_PROPERTY_AUDIO_HW_VARIANT                             (0x00000904)
@@ -669,6 +684,7 @@
  * @value_type VEHICLE_VALUE_TYPE_INT32_VEC2
  * @change_mode VEHICLE_PROP_CHANGE_MODE_ON_CHANGE
  * @access VEHICLE_PROP_ACCESS_READ_WRITE
+ * @config_flags Additional info on power state. Should use vehicle_ap_power_state_config_flag.
  * @data_member int32_array
  */
 #define VEHICLE_PROPERTY_AP_POWER_STATE                               (0x00000A00)
@@ -824,7 +840,7 @@
 };
 
 /**
- * Property to share currently active application context in android side.
+ * Property to share currently active audio context in android side.
  * This can be used as a hint to adjust audio policy or other policy decision. Note that there
  * can be multiple context active at the same time.
  *
@@ -833,30 +849,36 @@
  * @access VEHICLE_PROP_ACCESS_WRITE
  * @data_member int32
  */
-#define VEHICLE_PROPERTY_APP_CONTEXT                        (0x00000B00)
+#define VEHICLE_PROPERTY_AUDIO_CONTEXT                        (0x00000B00)
 /**
- * Flags to tell the current application context. The same flag is used in
+ * Flags to tell the current audio context.
  */
-enum vehicle_app_context_flag {
+enum vehicle_audio_context_flag {
     /** Music playback is currently active. */
-    VEHICLE_APP_CONTEXT_MUSIC_FLAG = 0x1,
+    VEHICLE_AUDIO_CONTEXT_MUSIC_FLAG                      = 0x1,
     /** Navigation is currently running. */
-    VEHICLE_APP_CONTEXT_NAVIGATION_FLAG = 0x2,
+    VEHICLE_AUDIO_CONTEXT_NAVIGATION_FLAG                 = 0x2,
     /** Voice command session is currently running. */
-    VEHICLE_APP_CONTEXT_VOICE_COMMAND_FLAG = 0x4,
+    VEHICLE_AUDIO_CONTEXT_VOICE_COMMAND_FLAG              = 0x4,
     /** Voice call is currently active. */
-    VEHICLE_APP_CONTEXT_CALL_FLAG = 0x8,
+    VEHICLE_AUDIO_CONTEXT_CALL_FLAG                       = 0x8,
     /** Alarm is active. This may be only used in VEHICLE_PROPERTY_AUDIO_ROUTING_POLICY. */
-    VEHICLE_APP_CONTEXT_ALARM_FLAG = 0x10,
+    VEHICLE_AUDIO_CONTEXT_ALARM_FLAG                      = 0x10,
     /**
      * Notification sound is active. This may be only used in VEHICLE_PROPERTY_AUDIO_ROUTING_POLICY.
      */
-    VEHICLE_APP_CONTEXT_NOTIFICATION_FLAG = 0x20,
+    VEHICLE_AUDIO_CONTEXT_NOTIFICATION_FLAG               = 0x20,
     /**
      * Context unknown. Only used for VEHICLE_PROPERTY_AUDIO_ROUTING_POLICY to represent default
      * stream for unknown contents.
      */
-    VEHICLE_APP_CONTEXT_UNKNOWN_FLAG = 0x40,
+    VEHICLE_AUDIO_CONTEXT_UNKNOWN_FLAG                    = 0x40,
+    /** Safety alert / warning is played. */
+    VEHICLE_AUDIO_CONTEXT_SAFETY_ALERT_FLAG               = 0x80,
+    /** CD / DVD kind of audio is played */
+    VEHICLE_AUDIO_CONTEXT_CD_ROM                         = 0x100,
+    /** Aux audio input is played */
+    VEHICLE_AUDIO_CONTEXT_AUX_AUDIO                      = 0x200,
 };
 
 /**
@@ -1218,6 +1240,7 @@
          * from 1 (see VEHICLE_RADIO_PRESET_MIN_VALUE) to vehicle_radio_num_presets.
          */
         int32_t vehicle_radio_num_presets;
+        int32_t config_array[4];
     };
 
     /**
@@ -1537,8 +1560,11 @@
      * @param device
      * @param prop
      * @param sample_rate
+     * @param zones All subscribed zones for zoned property. can be ignored for non-zoned property.
+     *              0 means all zones supported instead of no zone.
      */
-    int (*subscribe)(struct vehicle_hw_device* device, int32_t prop, float sample_rate);
+    int (*subscribe)(struct vehicle_hw_device* device, int32_t prop, float sample_rate,
+            int32_t zones);
 
     /** Cancel subscription on a property. */
     int (*unsubscribe)(struct vehicle_hw_device* device, int32_t prop);
diff --git a/modules/vehicle/vehicle.c b/modules/vehicle/vehicle.c
index 7e92ddd..38c38ee 100644
--- a/modules/vehicle/vehicle.c
+++ b/modules/vehicle/vehicle.c
@@ -372,6 +372,10 @@
                 }
                 break;
             default: // unsupported
+                if (sub->impl == NULL) {
+                    ALOGE("subscription impl NULL");
+                    return;
+                }
                 if (sub->impl->error_fn_ != NULL) {
                     sub->impl->error_fn_(VEHICLE_ERROR_UNKNOWN, VEHICLE_PROPERTY_INVALID,
                             VEHICLE_OPERATION_GENERIC);
@@ -402,7 +406,8 @@
     }
 }
 
-static int vdev_subscribe(vehicle_hw_device_t* device, int32_t prop, float sample_rate) {
+static int vdev_subscribe(vehicle_hw_device_t* device, int32_t prop, float sample_rate,
+        int32_t zones) {
     ALOGD("vdev_subscribe 0x%x, %f", prop, sample_rate);
     vehicle_device_impl_t* impl = (vehicle_device_impl_t*)device;
     // Check that the device is initialized.
diff --git a/tests/vehicle/vehicle-hal-tool.c b/tests/vehicle/vehicle-hal-tool.c
index 78fd714..d10a7b9 100755
--- a/tests/vehicle/vehicle-hal-tool.c
+++ b/tests/vehicle/vehicle-hal-tool.c
@@ -292,7 +292,7 @@
     uint32_t wait_in_seconds) {
     // Init the device with a callback.
     device->init(device, vehicle_event_callback, vehicle_error_callback);
-    int ret_code = device->subscribe(device, prop, 0);
+    int ret_code = device->subscribe(device, prop, 0, 0);
     if (ret_code != 0) {
         printf("Could not subscribe: %d\n", ret_code);
         exit(1);
@@ -355,6 +355,7 @@
     char int_array_string[1000]; int_array_string[0] = '\0';
 
     int opt;
+    //TODO allow passing zone
     while ((opt = getopt(argc, argv, "lm:p:t:v:w:s:")) != -1) {
         switch (opt) {
             case 'l':
diff --git a/tests/vehicle/vehicle_tests.cpp b/tests/vehicle/vehicle_tests.cpp
index 5862972..4c15570 100644
--- a/tests/vehicle/vehicle_tests.cpp
+++ b/tests/vehicle/vehicle_tests.cpp
@@ -99,7 +99,7 @@
 TEST_F(VehicleDevice, subscribeTest) {
     // If the device is not init subscribe should fail off the bat.
     int ret_code = vehicle_device()->subscribe(vehicle_device(), VEHICLE_PROPERTY_DRIVING_STATUS,
-            0);
+            0, 0);
     ASSERT_EQ(ret_code, -EINVAL) << "Return code is: " << ret_code;
 
     // Let's init the device.
@@ -107,7 +107,7 @@
     ASSERT_EQ(ret_code, 0) << "Return code is: " << ret_code;
 
     // Subscribe should now go through.
-    ret_code = vehicle_device()->subscribe(vehicle_device(), VEHICLE_PROPERTY_DRIVING_STATUS, 0);
+    ret_code = vehicle_device()->subscribe(vehicle_device(), VEHICLE_PROPERTY_DRIVING_STATUS, 0, 0);
     ASSERT_EQ(ret_code, 0) << "Return code is: " << ret_code;
 
     // We should start getting some messages thrown from the callback. Let's