diff --git a/include/hardware/vr.h b/include/hardware/vr.h
new file mode 100644
index 0000000..494f016
--- /dev/null
+++ b/include/hardware/vr.h
@@ -0,0 +1,104 @@
+/*
+ * Copyright (C) 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef ANDROID_INCLUDE_HARDWARE_VR_H
+#define ANDROID_INCLUDE_HARDWARE_VR_H
+
+#include <stdbool.h>
+#include <sys/cdefs.h>
+#include <hardware/hardware.h>
+
+__BEGIN_DECLS
+
+#define VR_HARDWARE_MODULE_ID "vr_module"
+
+#define VR_MODULE_API_VERSION_1_0 HARDWARE_MODULE_API_VERSION(1, 0)
+
+/**
+ * Implement this HAL to receive callbacks when a virtual reality (VR)
+ * application is being used.  VR applications characteristically have a number
+ * of special display and performance requirements, including:
+ * - Low sensor latency - Total end-to-end latency from the IMU, accelerometer,
+ *   and gyro to an application-visible callback must be extremely low (<5ms
+ *   typically).  This is required for HIFI sensor support.
+ * - Low display latency - Total end-to-end latency from the GPU draw calls to
+ *   the actual display update must be as low as possible.  This is typically
+ *   achieved by using SurfaceFlinger in a single-buffered mode, and assuring
+ *   that draw calls are synchronized with the display scanout correctly.  Any
+ *   GPU settings required to allow consistent performance of this operation
+ *   are required, including the EGL extensions: EGL_IMG_context_priority, and
+ *   EGL_XXX_set_render_buffer_mode.
+ * - Low-persistence display - Display persistence settings must be set as low as
+ *   possible while still maintaining a reasonable brightness.  For a typical
+ *   display running at 60Hz, pixels should be illuminated for <4ms to be
+ *   considered low-persistence (<2ms is desirable).  This avoids ghosting
+ *   during movements in a VR setting.
+ * - Consistent performance of the GPU and CPU - When given a mixed GPU/CPU
+ *   workload for a VR application with bursts of work at regular intervals
+ *   several times a frame.  CPU scheduling should ensure that the application
+ *   render thread is run consistently within 1ms of when required for the
+ *   draw window, and an appropriate clockrate is maintained to ensure the
+ *   workload finishes within the time alloted to the draw window.  Likewise,
+ *   GPU scheduling should ensure that work from the application render thread
+ *   is given priority over other GPU work, and that a high enough clockrate can
+ *   be maintained to ensure that this completes within the draw window.  CTS
+ *   tests with example VR workloads will be available to assess performance
+ *   tuning.
+ *
+ * Vendors implementing this HAL are expected to use set_vr_mode as a hint to
+ * enable VR-specific performance tuning, and to turn on any device features
+ * optimal for VR display modes (or do nothing if none are available). Devices
+ * that advertise FEATURE_VR_MODE_HIGH_PERFORMANCE are must pass the additional
+ * CTS performance tests required for this feature and follow the additional
+ * guidelines for hardware implementation for "VR Ready" devices.
+ *
+ * No methods in this HAL will be called concurrently from the Android framework.
+ */
+typedef struct vr_module {
+    /**
+     * Common methods of the  module.  This *must* be the first member of
+     * vr_module as users of * this structure will cast a hw_module_t to a
+     * vr_module pointer in contexts where it's known that the hw_module_t
+     * references a vr_module.
+     */
+    struct hw_module_t common;
+
+    /**
+     * Convenience method for the HAL implementation to set up any state needed
+     * at runtime startup.  This is called once from the VrManagerService during
+     * its boot phase.  No methods from this HAL will be called before init.
+     */
+    void (*init)(struct vr_module *module);
+
+    /**
+     * Set the VR mode state.  Possible states of the enabled parameter are:
+     * false - VR mode is disabled, turn off all VR-specific settings.
+     * true - VR mode is enabled, turn on all VR-specific settings.
+     *
+     * This is called from the VrManagerService whenever the application(s)
+     * currently in use enters or leaves VR mode. This will typically occur
+     * when the user switches or from an application that has indicated to
+     * system_server that it should run in VR mode.
+     */
+    void (*set_vr_mode)(struct vr_module *module, bool enabled);
+
+    /* Reserved for future use. Must be NULL. */
+    void* reserved[8 - 2];
+} vr_module_t;
+
+__END_DECLS
+
+#endif /* ANDROID_INCLUDE_HARDWARE_VR_H */
diff --git a/modules/Android.mk b/modules/Android.mk
index a77188d..3dc4ca6 100644
--- a/modules/Android.mk
+++ b/modules/Android.mk
@@ -1,4 +1,4 @@
 hardware_modules := gralloc hwcomposer audio nfc nfc-nci local_time \
 	power usbaudio audio_remote_submix camera usbcamera consumerir sensors vibrator \
-	tv_input fingerprint input vehicle hardware_properties
+	tv_input fingerprint input vehicle hardware_properties vr
 include $(call all-named-subdir-makefiles,$(hardware_modules))
diff --git a/modules/vr/Android.mk b/modules/vr/Android.mk
new file mode 100644
index 0000000..43c8e92
--- /dev/null
+++ b/modules/vr/Android.mk
@@ -0,0 +1,26 @@
+# Copyright (C) 2016 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+LOCAL_PATH := $(call my-dir)
+
+include $(CLEAR_VARS)
+
+LOCAL_MODULE := vr.default
+LOCAL_MODULE_RELATIVE_PATH := hw
+LOCAL_SRC_FILES := vr.c
+LOCAL_SHARED_LIBRARIES := libcutils
+LOCAL_MODULE_TAGS := optional
+LOCAL_CFLAGS += -Wno-unused-parameter
+
+include $(BUILD_SHARED_LIBRARY)
diff --git a/modules/vr/vr.c b/modules/vr/vr.c
new file mode 100644
index 0000000..c5af593
--- /dev/null
+++ b/modules/vr/vr.c
@@ -0,0 +1,47 @@
+/*
+ * Copyright (C) 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#define LOG_TAG "VrHal"
+
+#include <hardware/vr.h>
+#include <hardware/hardware.h>
+
+static void vr_init(struct vr_module *module) {
+    // NOOP
+}
+
+static void vr_set_vr_mode(struct vr_module *module, bool enabled) {
+    // NOOP
+}
+
+static struct hw_module_methods_t vr_module_methods = {
+    .open = NULL,
+};
+
+
+vr_module_t HAL_MODULE_INFO_SYM = {
+    .common = {
+        .tag                = HARDWARE_MODULE_TAG,
+        .module_api_version = VR_MODULE_API_VERSION_1_0,
+        .hal_api_version    = HARDWARE_HAL_API_VERSION,
+        .id                 = VR_HARDWARE_MODULE_ID,
+        .name               = "Demo VR HAL",
+        .author             = "The Android Open Source Project",
+        .methods            = &vr_module_methods,
+    },
+
+    .init = vr_init,
+    .set_vr_mode = vr_set_vr_mode,
+};