diff --git a/include/hardware/audio.h b/include/hardware/audio.h
index 3a0962e..b0c0c0e 100644
--- a/include/hardware/audio.h
+++ b/include/hardware/audio.h
@@ -67,6 +67,7 @@
 #define AUDIO_HARDWARE_MODULE_ID_A2DP "a2dp"
 #define AUDIO_HARDWARE_MODULE_ID_USB "usb"
 #define AUDIO_HARDWARE_MODULE_ID_REMOTE_SUBMIX "r_submix"
+#define AUDIO_HARDWARE_MODULE_ID_CODEC_OFFLOAD "codec_offload"
 
 /**************************************/
 
@@ -117,16 +118,35 @@
  * "sup_sampling_rates=44100|48000" */
 #define AUDIO_PARAMETER_STREAM_SUP_SAMPLING_RATES "sup_sampling_rates"
 
+/**
+ * audio codec parameters
+ */
+
+#define AUDIO_OFFLOAD_CODEC_PARAMS "music_offload_codec_param"
+#define AUDIO_OFFLOAD_CODEC_BIT_PER_SAMPLE "music_offload_bit_per_sample"
+#define AUDIO_OFFLOAD_CODEC_BIT_RATE "music_offload_bit_rate"
+#define AUDIO_OFFLOAD_CODEC_AVG_BIT_RATE "music_offload_avg_bit_rate"
+#define AUDIO_OFFLOAD_CODEC_ID "music_offload_codec_id"
+#define AUDIO_OFFLOAD_CODEC_BLOCK_ALIGN "music_offload_block_align"
+#define AUDIO_OFFLOAD_CODEC_SAMPLE_RATE "music_offload_sample_rate"
+#define AUDIO_OFFLOAD_CODEC_ENCODE_OPTION "music_offload_encode_option"
+#define AUDIO_OFFLOAD_CODEC_NUM_CHANNEL  "music_offload_num_channels"
+#define AUDIO_OFFLOAD_CODEC_DOWN_SAMPLING  "music_offload_down_sampling"
+#define AUDIO_OFFLOAD_CODEC_DELAY_SAMPLES  "delay_samples"
+#define AUDIO_OFFLOAD_CODEC_PADDING_SAMPLES  "padding_samples"
 
 /**************************************/
 
-/* common audio stream configuration parameters */
+/* common audio stream configuration parameters
+ * You should memset() the entire structure to zero before use to
+ * ensure forward compatibility
+ */
 struct audio_config {
     uint32_t sample_rate;
     audio_channel_mask_t channel_mask;
     audio_format_t  format;
+    audio_offload_info_t offload_info;
 };
-
 typedef struct audio_config audio_config_t;
 
 /* common audio stream parameters and operations */
@@ -213,6 +233,22 @@
 };
 typedef struct audio_stream audio_stream_t;
 
+/* type of asynchronous write callback events. Mutually exclusive */
+typedef enum {
+    STREAM_CBK_EVENT_WRITE_READY, /* non blocking write completed */
+    STREAM_CBK_EVENT_DRAIN_READY  /* drain completed */
+} stream_callback_event_t;
+
+typedef int (*stream_callback_t)(stream_callback_event_t event, void *param, void *cookie);
+
+/* type of drain requested to audio_stream_out->drain(). Mutually exclusive */
+typedef enum {
+    AUDIO_DRAIN_ALL,            /* drain() returns when all data has been played */
+    AUDIO_DRAIN_EARLY_NOTIFY    /* drain() returns a short time before all data
+                                   from the current track has been played to
+                                   give time for gapless track switch */
+} audio_drain_type_t;
+
 /**
  * audio_stream_out is the abstraction interface for the audio output hardware.
  *
@@ -242,6 +278,13 @@
      * negative status_t. If at least one frame was written successfully prior to the error,
      * it is suggested that the driver return that successful (short) byte count
      * and then return an error in the subsequent call.
+     *
+     * If set_callback() has previously been called to enable non-blocking mode
+     * the write() is not allowed to block. It must write only the number of
+     * bytes that currently fit in the driver/hardware buffer and then return
+     * this byte count. If this is less than the requested write size the
+     * callback function must be called when more space is available in the
+     * driver/hardware buffer.
      */
     ssize_t (*write)(struct audio_stream_out *stream, const void* buffer,
                      size_t bytes);
@@ -259,6 +302,60 @@
     int (*get_next_write_timestamp)(const struct audio_stream_out *stream,
                                     int64_t *timestamp);
 
+    /**
+     * set the callback function for notifying completion of non-blocking
+     * write and drain.
+     * Calling this function implies that all future write() and drain()
+     * must be non-blocking and use the callback to signal completion.
+     */
+    int (*set_callback)(struct audio_stream_out *stream,
+            stream_callback_t callback, void *cookie);
+
+    /**
+     * Notifies to the audio driver to stop playback however the queued buffers are
+     * retained by the hardware. Useful for implementing pause/resume. Empty implementation
+     * if not supported however should be implemented for hardware with non-trivial
+     * latency. In the pause state audio hardware could still be using power. User may
+     * consider calling suspend after a timeout.
+     *
+     * Implementation of this function is mandatory for offloaded playback.
+     */
+    int (*pause)(struct audio_stream_out* stream);
+
+    /**
+     * Notifies to the audio driver to resume playback following a pause.
+     * Returns error if called without matching pause.
+     *
+     * Implementation of this function is mandatory for offloaded playback.
+     */
+    int (*resume)(struct audio_stream_out* stream);
+
+    /**
+     * Requests notification when data buffered by the driver/hardware has
+     * been played. If set_callback() has previously been called to enable
+     * non-blocking mode, the drain() must not block, instead it should return
+     * quickly and completion of the drain is notified through the callback.
+     * If set_callback() has not been called, the drain() must block until
+     * completion.
+     * If type==AUDIO_DRAIN_ALL, the drain completes when all previously written
+     * data has been played.
+     * If type==AUDIO_DRAIN_EARLY_NOTIFY, the drain completes shortly before all
+     * data for the current track has played to allow time for the framework
+     * to perform a gapless track switch.
+     *
+     * Drain must return immediately on stop() and flush() call
+     *
+     * Implementation of this function is mandatory for offloaded playback.
+     */
+    int (*drain)(struct audio_stream_out* stream, audio_drain_type_t type );
+
+    /**
+     * Notifies to the audio driver to flush the queued data. Stream must already
+     * be paused before calling flush().
+     *
+     * Implementation of this function is mandatory for offloaded playback.
+     */
+   int (*flush)(struct audio_stream_out* stream);
 };
 typedef struct audio_stream_out audio_stream_out_t;
 
@@ -296,18 +393,14 @@
 static inline size_t audio_stream_frame_size(const struct audio_stream *s)
 {
     size_t chan_samp_sz;
+    audio_format_t format = s->get_format(s);
 
-    switch (s->get_format(s)) {
-    case AUDIO_FORMAT_PCM_16_BIT:
-        chan_samp_sz = sizeof(int16_t);
-        break;
-    case AUDIO_FORMAT_PCM_8_BIT:
-    default:
-        chan_samp_sz = sizeof(int8_t);
-        break;
+    if (audio_is_linear_pcm(format)) {
+        chan_samp_sz = audio_bytes_per_sample(format);
+        return popcount(s->get_channels(s)) * chan_samp_sz;
     }
 
-    return popcount(s->get_channels(s)) * chan_samp_sz;
+    return sizeof(int8_t);
 }
 
 
diff --git a/include/hardware/audio_policy.h b/include/hardware/audio_policy.h
index c635ebf..4e75e02 100644
--- a/include/hardware/audio_policy.h
+++ b/include/hardware/audio_policy.h
@@ -133,7 +133,8 @@
                                     uint32_t samplingRate,
                                     audio_format_t format,
                                     audio_channel_mask_t channelMask,
-                                    audio_output_flags_t flags);
+                                    audio_output_flags_t flags,
+                                    const audio_offload_info_t *offloadInfo);
 
     /* indicates to the audio policy manager that the output starts being used
      * by corresponding stream. */
@@ -241,6 +242,10 @@
 
     /* dump state */
     int (*dump)(const struct audio_policy *pol, int fd);
+
+    /* check if offload is possible for given sample rate, bitrate, duration, ... */
+    bool (*is_offload_supported)(const struct audio_policy *pol,
+                                const audio_offload_info_t *info);
 };
 
 /* audio hw module handle used by load_hw_module(), open_output_on_module()
@@ -390,7 +395,8 @@
                                      audio_format_t *pFormat,
                                      audio_channel_mask_t *pChannelMask,
                                      uint32_t *pLatencyMs,
-                                     audio_output_flags_t flags);
+                                     audio_output_flags_t flags,
+                                     const audio_offload_info_t *offloadInfo);
 
     /* Opens an audio input on a particular HW module.
      *
diff --git a/include/hardware/fused_location.h b/include/hardware/fused_location.h
new file mode 100644
index 0000000..4d6d5a0
--- /dev/null
+++ b/include/hardware/fused_location.h
@@ -0,0 +1,729 @@
+/*
+ * Copyright (C) 2013 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef ANDROID_INCLUDE_HARDWARE_FUSED_LOCATION_H
+#define ANDROID_INCLUDE_HARDWARE_FUSED_LOCATION_H
+
+#include <hardware/hardware.h>
+
+
+/**
+ * This header file defines the interface of the Fused Location Provider.
+ * Fused Location Provider is designed to fuse data from various sources
+ * like GPS, Wifi, Cell, Sensors, Bluetooth etc to provide a fused location to the
+ * upper layers. The advantage of doing fusion in hardware is power savings.
+ * The goal is to do this without waking up the AP to get additional data.
+ * The software implementation of FLP will decide when to use
+ * the hardware fused location. Other location features like geofencing will
+ * also be implemented using fusion in hardware.
+ */
+__BEGIN_DECLS
+
+#define FLP_HEADER_VERSION          1
+#define FLP_MODULE_API_VERSION_0_1  HARDWARE_MODULE_API_VERSION(0, 1)
+#define FLP_DEVICE_API_VERSION_0_1  HARDWARE_DEVICE_API_VERSION_2(0, 1, FLP_HEADER_VERSION)
+
+/**
+ * The id of this module
+ */
+#define FUSED_LOCATION_HARDWARE_MODULE_ID "flp"
+
+/**
+ * Name for the FLP location interface
+ */
+#define FLP_LOCATION_INTERFACE     "flp_location"
+
+/**
+ * Name for the FLP location interface
+ */
+#define FLP_DIAGNOSTIC_INTERFACE     "flp_diagnostic"
+
+/**
+ * Name for the FLP_Geofencing interface.
+ */
+#define FLP_GEOFENCING_INTERFACE   "flp_geofencing"
+
+/**
+ * Name for the FLP_device context interface.
+ */
+#define FLP_DEVICE_CONTEXT_INTERFACE   "flp_device_context"
+
+/**
+ * Constants to indicate the various subsystems
+ * that will be used.
+ */
+#define FLP_TECH_MASK_GNSS      (1U<<0)
+#define FLP_TECH_MASK_WIFI      (1U<<1)
+#define FLP_TECH_MASK_SENSORS   (1U<<2)
+#define FLP_TECH_MASK_CELL      (1U<<3)
+#define FLP_TECH_MASK_BLUETOOTH (1U<<4)
+
+/**
+ * This constant is used with the batched locations
+ * APIs. Batching is mandatory when FLP implementation
+ * is supported. If the flag is set, the hardware implementation
+ * will wake up the application processor when the FIFO is full,
+ * If the flag is not set, the hardware implementation will drop
+ * the oldest data when the FIFO is full.
+ */
+#define FLP_BATCH_WAKEUP_ON_FIFO_FULL        0x0000001
+
+/**
+ * While batching, the implementation should not call the
+ * flp_location_callback on every location fix. However,
+ * sometimes in high power mode, the system might need
+ * a location callback every single time the location
+ * fix has been obtained. This flag controls that option.
+ * Its the responsibility of the upper layers (caller) to switch
+ * it off, if it knows that the AP might go to sleep.
+ * When this bit is on amidst a batching session, batching should
+ * continue while location fixes are reported in real time.
+ */
+#define FLP_BATCH_CALLBACK_ON_LOCATION_FIX   0x0000002
+
+/** Flags to indicate which values are valid in a FlpLocation. */
+typedef uint16_t FlpLocationFlags;
+
+// IMPORTANT: Note that the following values must match
+// constants in the corresponding java file.
+
+/** FlpLocation has valid latitude and longitude. */
+#define FLP_LOCATION_HAS_LAT_LONG   (1U<<0)
+/** FlpLocation has valid altitude. */
+#define FLP_LOCATION_HAS_ALTITUDE   (1U<<1)
+/** FlpLocation has valid speed. */
+#define FLP_LOCATION_HAS_SPEED      (1U<<2)
+/** FlpLocation has valid bearing. */
+#define FLP_LOCATION_HAS_BEARING    (1U<<4)
+/** FlpLocation has valid accuracy. */
+#define FLP_LOCATION_HAS_ACCURACY   (1U<<8)
+
+
+typedef int64_t FlpUtcTime;
+
+/** Represents a location. */
+typedef struct {
+    /** set to sizeof(FlpLocation) */
+    size_t          size;
+
+    /** Flags associated with the location object. */
+    FlpLocationFlags flags;
+
+    /** Represents latitude in degrees. */
+    double          latitude;
+
+    /** Represents longitude in degrees. */
+    double          longitude;
+
+    /**
+     * Represents altitude in meters above the WGS 84 reference
+     * ellipsoid. */
+    double          altitude;
+
+    /** Represents speed in meters per second. */
+    float           speed;
+
+    /** Represents heading in degrees. */
+    float           bearing;
+
+    /** Represents expected accuracy in meters. */
+    float           accuracy;
+
+    /** Timestamp for the location fix. */
+    FlpUtcTime      timestamp;
+
+    /** Sources used, will be Bitwise OR of the FLP_TECH_MASK bits. */
+    uint32_t         sources_used;
+} FlpLocation;
+
+typedef enum {
+    ASSOCIATE_JVM,
+    DISASSOCIATE_JVM,
+} ThreadEvent;
+
+/**
+ *  Callback with location information.
+ *  Can only be called from a thread created by create_thread_cb.
+ *  Parameters:
+ *     num_locations is the number of batched locations available.
+ *     location is the pointer to an array of pointers to location objects.
+ */
+typedef void (*flp_location_callback)(int32_t num_locations, FlpLocation** location);
+
+/**
+ * Callback utility for acquiring a wakelock.
+ * This can be used to prevent the CPU from suspending while handling FLP events.
+ */
+typedef void (*flp_acquire_wakelock)();
+
+/**
+ * Callback utility for releasing the FLP wakelock.
+ */
+typedef void (*flp_release_wakelock)();
+
+/**
+ * Callback for creating a thread that can call into the Java framework code.
+ * This must be used to create any threads that report events up to the framework.
+ */
+typedef pthread_t (*flp_create_thread)(ThreadEvent event);
+
+/** FLP callback structure. */
+typedef struct {
+    /** set to sizeof(FlpCallbacks) */
+    size_t      size;
+    flp_location_callback location_cb;
+    flp_acquire_wakelock acquire_wakelock_cb;
+    flp_release_wakelock release_wakelock_cb;
+    flp_create_thread create_thread_cb;
+} FlpCallbacks;
+
+
+/** Options with the batching FLP APIs */
+typedef struct {
+    /**
+     * Maximum power in mW that the underlying implementation
+     * can use for this batching call.
+     * If max_power_allocation_mW is 0, only fixes that are generated
+     * at no additional cost of power shall be reported.
+     */
+    double max_power_allocation_mW;
+
+    /** Bitwise OR of the FLP_TECH_MASKS to use */
+    uint32_t sources_to_use;
+
+    /**
+     * FLP_BATCH_WAKEUP_ON_FIFO_FULL - If set the hardware
+     * will wake up the AP when the buffer is full. If not set, the
+     * hardware will drop the oldest location object.
+     *
+     * FLP_BATCH_CALLBACK_ON_LOCATION_FIX - If set the location
+     * callback will be called every time there is a location fix.
+     * Its the responsibility of the upper layers (caller) to switch
+     * it off, if it knows that the AP might go to sleep. When this
+     * bit is on amidst a batching session, batching should continue
+     * while location fixes are reported in real time.
+     *
+     * Other flags to be bitwised ORed in the future.
+     */
+    uint32_t flags;
+
+    /**
+     * Frequency with which location needs to be batched in nano
+     * seconds.
+     */
+    int64_t period_ns;
+} FlpBatchOptions;
+
+#define FLP_RESULT_SUCCESS                       0
+#define FLP_RESULT_ERROR                        -1
+#define FLP_RESULT_INSUFFICIENT_MEMORY          -2
+#define FLP_RESULT_TOO_MANY_GEOFENCES           -3
+#define FLP_RESULT_ID_EXISTS                    -4
+#define FLP_RESULT_ID_UNKNOWN                   -5
+#define FLP_RESULT_INVALID_GEOFENCE_TRANSITION  -6
+
+/**
+ * Represents the standard FLP interface.
+ */
+typedef struct {
+    /**
+     * set to sizeof(FlpLocationInterface)
+     */
+    size_t size;
+
+    /**
+     * Opens the interface and provides the callback routines
+     * to the implemenation of this interface.
+     */
+    int (*init)(FlpCallbacks* callbacks );
+
+    /**
+     * Return the batch size (in number of FlpLocation objects)
+     * available in the hardware.  Note, different HW implementations
+     * may have different sample sizes.  This shall return number
+     * of samples defined in the format of FlpLocation.
+     * This will be used by the upper layer, to decide on the batching
+     * interval and whether the AP should be woken up or not.
+     */
+    int (*get_batch_size)();
+
+    /**
+     * Start batching locations. This API is primarily used when the AP is
+     * asleep and the device can batch locations in the hardware.
+     *   flp_location_callback is used to return the locations. When the buffer
+     * is full and FLP_BATCH_WAKEUP_ON_FIFO_FULL is used, the AP is woken up.
+     * When the buffer is full and FLP_BATCH_WAKEUP_ON_FIFO_FULL is not set,
+     * the oldest location object is dropped. In this case the  AP will not be
+     * woken up. The upper layer will use get_batched_location
+     * API to explicitly ask for the location.
+     *   If FLP_BATCH_CALLBACK_ON_LOCATION_FIX is set, the implementation
+     * will call the flp_location_callback every single time there is a location
+     * fix. This overrides FLP_BATCH_WAKEUP_ON_FIFO_FULL flag setting.
+     * It's the responsibility of the upper layers (caller) to switch
+     * it off, if it knows that the AP might go to sleep. This is useful
+     * for nagivational applications when the system is in high power mode.
+     * Parameters:
+     *    id - Id for the request.
+     *    options - See FlpBatchOptions struct definition.
+     * Return value:
+     *    FLP_RESULT_SUCCESS on success, FLP_RESULT_INSUFFICIENT_MEMORY,
+     *    FLP_RESULT_ID_EXISTS, FLP_RESULT_ERROR on failure.
+     */
+    int (*start_batching)(int id, FlpBatchOptions* options);
+
+    /**
+     * Update FlpBatchOptions associated with a batching request.
+     * When a batching operation is in progress and a batching option
+     * such as FLP_BATCH_WAKEUP_ON_FIFO_FULL needs to be updated, this API
+     * will be used. For instance, this can happen when the AP is awake and
+     * the maps application is being used.
+     * Parameters:
+     *    id - Id of an existing batch request.
+     *    new_options - Updated FlpBatchOptions
+     * Return value:
+     *    FLP_RESULT_SUCCESS on success, FLP_RESULT_ID_UNKNOWN,
+     *    FLP_RESULT_ERROR on error.
+     */
+    int (*update_batching_options)(int id, FlpBatchOptions* new_options);
+
+    /**
+     * Stop batching.
+     * Parameters:
+     *    id - Id for the request.
+     * Return Value:
+     *    FLP_RESULT_SUCCESS on success, FLP_RESULT_ID_UNKNOWN or
+     *    FLP_RESULT_ERROR on failure.
+     */
+    int (*stop_batching)(int id);
+
+    /**
+     * Closes the interface. If any batch operations are in progress,
+     * they should be stopped.
+     */
+    void (*cleanup)();
+
+    /**
+     * Get the fused location that was batched.
+     *   flp_location_callback is used to return the location. The location object
+     * is dropped from the buffer only when the buffer is full. Do not remove it
+     * from the buffer just because it has been returned using the callback.
+     * In other words, when there is no new location object, two calls to
+     * get_batched_location(1) should return the same location object.
+     * Parameters:
+     *      last_n_locations - Number of locations to get. This can be one or many.
+     *      If the last_n_locations is 1, you get the latest location known to the
+     *      hardware.
+     */
+    void (*get_batched_location)(int last_n_locations);
+
+    /**
+     * Injects current location from another location provider
+     * latitude and longitude are measured in degrees
+     * expected accuracy is measured in meters
+     * Parameters:
+     *      location - The location object being injected.
+     * Return value: FLP_RESULT_SUCCESS or FLP_RESULT_ERROR.
+     */
+    int  (*inject_location)(FlpLocation* location);
+
+    /**
+     * Get a pointer to extension information.
+     */
+    const void* (*get_extension)(const char* name);
+} FlpLocationInterface;
+
+struct flp_device_t {
+    struct hw_device_t common;
+
+    /**
+     * Get a handle to the FLP Interface.
+     */
+    const FlpLocationInterface* (*get_flp_interface)(struct flp_device_t* dev);
+};
+
+/**
+ * Callback for reports diagnostic data into the Java framework code.
+*/
+typedef void (*report_data)(char* data, int length);
+
+/**
+ * FLP diagnostic callback structure.
+ * Currently, not used - but this for future extension.
+ */
+typedef struct {
+    /** set to sizeof(FlpDiagnosticCallbacks) */
+    size_t      size;
+
+    flp_create_thread create_thread_cb;
+
+    /** reports diagnostic data into the Java framework code */
+    report_data data_cb;
+} FlpDiagnosticCallbacks;
+
+/** Extended interface for diagnostic support. */
+typedef struct {
+    /** set to sizeof(FlpDiagnosticInterface) */
+    size_t          size;
+
+    /**
+     * Opens the diagnostic interface and provides the callback routines
+     * to the implemenation of this interface.
+     */
+    void  (*init)(FlpDiagnosticCallbacks* callbacks);
+
+    /**
+     * Injects diagnostic data into the FLP subsystem.
+     * Return 0 on success, -1 on error.
+     **/
+    int  (*inject_data)(char* data, int length );
+} FlpDiagnosticInterface;
+
+/**
+ * Context setting information.
+ * All these settings shall be injected to FLP HAL at FLP init time.
+ * Following that, only the changed setting need to be re-injected
+ * upon changes.
+ */
+
+#define FLP_DEVICE_CONTEXT_GPS_ENABLED                     (1U<<0)
+#define FLP_DEVICE_CONTEXT_AGPS_ENABLED                    (1U<<1)
+#define FLP_DEVICE_CONTEXT_NETWORK_POSITIONING_ENABLED     (1U<<2)
+#define FLP_DEVICE_CONTEXT_WIFI_CONNECTIVITY_ENABLED       (1U<<3)
+#define FLP_DEVICE_CONTEXT_WIFI_POSITIONING_ENABLED        (1U<<4)
+#define FIP_DEVICE_CONTEXT_HW_NETWORK_POSITIONING ENABLED  (1U<<5)
+#define FLP_DEVICE_CONTEXT_AIRPLANE_MODE_ON                (1U<<6)
+#define FLP_DEVICE_CONTEXT_DATA_ENABLED                    (1U<<7)
+#define FLP_DEVICE_CONTEXT_ROAMING_ENABLED                 (1U<<8)
+#define FLP_DEVICE_CONTEXT_CURRENTLY_ROAMING               (1U<<9)
+#define FLP_DEVICE_CONTEXT_SENSOR_ENABLED                  (1U<<10)
+#define FLP_DEVICE_CONTEXT_BLUETOOTH_ENABLED               (1U<<11)
+#define FLP_DEVICE_CONTEXT_CHARGER_ON                      (1U<<12)
+
+/** Extended interface for device context support. */
+typedef struct {
+    /** set to sizeof(FlpDeviceContextInterface) */
+    size_t          size;
+
+    /**
+     * Injects debug data into the FLP subsystem.
+     * Return 0 on success, -1 on error.
+     **/
+    int  (*inject_device_context)(uint32_t enabledMask);
+} FlpDeviceContextInterface;
+
+
+/**
+ * There are 3 states associated with a Geofence: Inside, Outside, Unknown.
+ * There are 3 transitions: ENTERED, EXITED, UNCERTAIN.
+ *
+ * An example state diagram with confidence level: 95% and Unknown time limit
+ * set as 30 secs is shown below. (confidence level and Unknown time limit are
+ * explained latter)
+ *                         ____________________________
+ *                        |       Unknown (30 secs)   |
+ *                         """"""""""""""""""""""""""""
+ *                            ^ |                  |  ^
+ *                   UNCERTAIN| |ENTERED     EXITED|  |UNCERTAIN
+ *                            | v                  v  |
+ *                        ________    EXITED     _________
+ *                       | Inside | -----------> | Outside |
+ *                       |        | <----------- |         |
+ *                        """"""""    ENTERED    """""""""
+ *
+ * Inside state: We are 95% confident that the user is inside the geofence.
+ * Outside state: We are 95% confident that the user is outside the geofence
+ * Unknown state: Rest of the time.
+ *
+ * The Unknown state is better explained with an example:
+ *
+ *                            __________
+ *                           |         c|
+ *                           |  ___     |    _______
+ *                           |  |a|     |   |   b   |
+ *                           |  """     |    """""""
+ *                           |          |
+ *                            """"""""""
+ * In the diagram above, "a" and "b" are 2 geofences and "c" is the accuracy
+ * circle reported by the FLP subsystem. Now with regard to "b", the system is
+ * confident that the user is outside. But with regard to "a" is not confident
+ * whether it is inside or outside the geofence. If the accuracy remains the
+ * same for a sufficient period of time, the UNCERTAIN transition would be
+ * triggered with the state set to Unknown. If the accuracy improves later, an
+ * appropriate transition should be triggered.  This "sufficient period of time"
+ * is defined by the parameter in the add_geofence_area API.
+ *     In other words, Unknown state can be interpreted as a state in which the
+ * FLP subsystem isn't confident enough that the user is either inside or
+ * outside the Geofence. It moves to Unknown state only after the expiry of the
+ * timeout.
+ *
+ * The geofence callback needs to be triggered for the ENTERED and EXITED
+ * transitions, when the FLP system is confident that the user has entered
+ * (Inside state) or exited (Outside state) the Geofence. An implementation
+ * which uses a value of 95% as the confidence is recommended. The callback
+ * should be triggered only for the transitions requested by the
+ * add_geofence_area call.
+ *
+ * Even though the diagram and explanation talks about states and transitions,
+ * the callee is only interested in the transistions. The states are mentioned
+ * here for illustrative purposes.
+ *
+ * Startup Scenario: When the device boots up, if an application adds geofences,
+ * and then we get an accurate FLP location fix, it needs to trigger the
+ * appropriate (ENTERED or EXITED) transition for every Geofence it knows about.
+ * By default, all the Geofences will be in the Unknown state.
+ *
+ * When the FLP system is unavailable, flp_geofence_status_callback should be
+ * called to inform the upper layers of the same. Similarly, when it becomes
+ * available the callback should be called. This is a global state while the
+ * UNKNOWN transition described above is per geofence.
+ *
+ */
+#define FLP_GEOFENCE_TRANSITION_ENTERED     (1L<<0)
+#define FLP_GEOFENCE_TRANSITION_EXITED      (1L<<1)
+#define FLP_GEOFENCE_TRANSITION_UNCERTAIN   (1L<<2)
+
+#define FLP_GEOFENCE_MONITOR_STATUS_UNAVAILABLE (1L<<0)
+#define FLP_GEOFENCE_MONITOR_STATUS_AVAILABLE   (1L<<1)
+
+/**
+ * The callback associated with the geofence.
+ * Parameters:
+ *      geofence_id - The id associated with the add_geofence_area.
+ *      location    - The current location as determined by the FLP subsystem.
+ *      transition  - Can be one of FLP_GEOFENCE_TRANSITION_ENTERED, FLP_GEOFENCE_TRANSITION_EXITED,
+ *                    FLP_GEOFENCE_TRANSITION_UNCERTAIN.
+ *      timestamp   - Timestamp when the transition was detected; -1 if not available.
+ *      sources_used - Bitwise OR of FLP_TECH_MASK flags indicating which
+ *                     subsystems were used.
+ *
+ * The callback should only be called when the caller is interested in that
+ * particular transition. For instance, if the caller is interested only in
+ * ENTERED transition, then the callback should NOT be called with the EXITED
+ * transition.
+ *
+ * IMPORTANT: If a transition is triggered resulting in this callback, the
+ * subsystem will wake up the application processor, if its in suspend state.
+ */
+typedef void (*flp_geofence_transition_callback) (int32_t geofence_id,  FlpLocation* location,
+        int32_t transition, FlpUtcTime timestamp, uint32_t sources_used);
+
+/**
+ * The callback associated with the availablity of one the sources used for geofence
+ * monitoring by the FLP sub-system For example, if the GPS system determines that it cannot
+ * monitor geofences because of lack of reliability or unavailability of the GPS signals,
+ * it will call this callback with FLP_GEOFENCE_MONITOR_STATUS_UNAVAILABLE parameter and the
+ * source set to FLP_TECH_MASK_GNSS.
+ *
+ * Parameters:
+ *  status - FLP_GEOFENCE_MONITOR_STATUS_UNAVAILABLE or FLP_GEOFENCE_MONITOR_STATUS_AVAILABLE.
+ *  source - One of the FLP_TECH_MASKS
+ *  last_location - Last known location.
+ */
+typedef void (*flp_geofence_monitor_status_callback) (int32_t status, uint32_t source,
+                                                      FlpLocation* last_location);
+
+/**
+ * The callback associated with the add_geofence call.
+ *
+ * Parameter:
+ * geofence_id - Id of the geofence.
+ * result - FLP_RESULT_SUCCESS
+ *          FLP_RESULT_ERROR_TOO_MANY_GEOFENCES  - geofence limit has been reached.
+ *          FLP_RESULT_ID_EXISTS  - geofence with id already exists
+ *          FLP_RESULT_INVALID_GEOFENCE_TRANSITION - the monitorTransition contains an
+ *              invalid transition
+ *          FLP_RESULT_ERROR - for other errors.
+ */
+typedef void (*flp_geofence_add_callback) (int32_t geofence_id, int32_t result);
+
+/**
+ * The callback associated with the remove_geofence call.
+ *
+ * Parameter:
+ * geofence_id - Id of the geofence.
+ * result - FLP_RESULT_SUCCESS
+ *          FLP_RESULT_ID_UNKNOWN - for invalid id
+ *          FLP_RESULT_ERROR for others.
+ */
+typedef void (*flp_geofence_remove_callback) (int32_t geofence_id, int32_t result);
+
+
+/**
+ * The callback associated with the pause_geofence call.
+ *
+ * Parameter:
+ * geofence_id - Id of the geofence.
+ * result - FLP_RESULT_SUCCESS
+ *          FLP_RESULT__ID_UNKNOWN - for invalid id
+ *          FLP_RESULT_INVALID_TRANSITION -
+ *                    when monitor_transitions is invalid
+ *          FLP_RESULT_ERROR for others.
+ */
+typedef void (*flp_geofence_pause_callback) (int32_t geofence_id, int32_t result);
+
+/**
+ * The callback associated with the resume_geofence call.
+ *
+ * Parameter:
+ * geofence_id - Id of the geofence.
+ * result - FLP_RESULT_SUCCESS
+ *          FLP_RESULT_ID_UNKNOWN - for invalid id
+ *          FLP_RESULT_ERROR for others.
+ */
+typedef void (*flp_geofence_resume_callback) (int32_t geofence_id, int32_t result);
+
+typedef struct {
+    flp_geofence_transition_callback geofence_transition_callback;
+    flp_geofence_monitor_status_callback geofence_status_callback;
+    flp_geofence_add_callback geofence_add_callback;
+    flp_geofence_remove_callback geofence_remove_callback;
+    flp_geofence_pause_callback geofence_pause_callback;
+    flp_geofence_resume_callback geofence_resume_callback;
+    flp_create_thread create_thread_cb;
+} FlpGeofenceCallbacks;
+
+
+/** Type of geofence */
+typedef enum {
+    TYPE_CIRCLE = 0,
+} GeofenceType;
+
+/** Circular geofence is represented by lat / long / radius */
+typedef struct {
+    double latitude;
+    double longitude;
+    double radius_m;
+} GeofenceCircle;
+
+/** Represents the type of geofence and data */
+typedef struct {
+    GeofenceType type;
+    union {
+        GeofenceCircle circle;
+    } geofence;
+} GeofenceData;
+
+/** Geofence Options */
+typedef struct {
+   /**
+    * The current state of the geofence. For example, if
+    * the system already knows that the user is inside the geofence,
+    * this will be set to FLP_GEOFENCE_TRANSITION_ENTERED. In most cases, it
+    * will be FLP_GEOFENCE_TRANSITION_UNCERTAIN. */
+    int last_transition;
+
+   /**
+    * Transitions to monitor. Bitwise OR of
+    * FLP_GEOFENCE_TRANSITION_ENTERED, FLP_GEOFENCE_TRANSITION_EXITED and
+    * FLP_GEOFENCE_TRANSITION_UNCERTAIN.
+    */
+    int monitor_transitions;
+
+   /**
+    * Defines the best-effort description
+    * of how soon should the callback be called when the transition
+    * associated with the Geofence is triggered. For instance, if set
+    * to 1000 millseconds with FLP_GEOFENCE_TRANSITION_ENTERED, the callback
+    * should be called 1000 milliseconds within entering the geofence.
+    * This parameter is defined in milliseconds.
+    * NOTE: This is not to be confused with the rate that the GPS is
+    * polled at. It is acceptable to dynamically vary the rate of
+    * sampling the GPS for power-saving reasons; thus the rate of
+    * sampling may be faster or slower than this.
+    */
+    int notification_responsivenes_ms;
+
+   /**
+    * The time limit after which the UNCERTAIN transition
+    * should be triggered. This paramter is defined in milliseconds.
+    */
+    int unknown_timer_ms;
+
+    /**
+     * The sources to use for monitoring geofences. Its a BITWISE-OR
+     * of FLP_TECH_MASK flags.
+     */
+    uint32_t sources_to_use;
+} GeofenceOptions;
+
+/** Geofence struct */
+typedef struct {
+    int32_t geofence_id;
+    GeofenceData* data;
+    GeofenceOptions* options;
+} Geofence;
+
+/** Extended interface for FLP_Geofencing support */
+typedef struct {
+   /** set to sizeof(FlpGeofencingInterface) */
+   size_t          size;
+
+   /**
+    * Opens the geofence interface and provides the callback routines
+    * to the implemenation of this interface.
+    */
+   void  (*init)( FlpGeofenceCallbacks* callbacks );
+
+   /**
+    * Add a list of geofences.
+    * Parameters:
+    *     number_of_geofences - The number of geofences that needed to be added.
+    *     geofences - Pointer to array of pointers to Geofence structure.
+    */
+   void (*add_geofences) (int32_t number_of_geofences, Geofence** geofences);
+
+   /**
+    * Pause monitoring a particular geofence.
+    * Parameters:
+    *   geofence_id - The id for the geofence.
+    */
+   void (*pause_geofence) (int32_t geofence_id);
+
+   /**
+    * Resume monitoring a particular geofence.
+    * Parameters:
+    *   geofence_id - The id for the geofence.
+    *   monitor_transitions - Which transitions to monitor. Bitwise OR of
+    *       FLP_GEOFENCE_TRANSITION_ENTERED, FLP_GEOFENCE_TRANSITION_EXITED and
+    *       FLP_GEOFENCE_TRANSITION_UNCERTAIN.
+    *       This supersedes the value associated provided in the
+    *       add_geofence_area call.
+    */
+   void (*resume_geofence) (int32_t geofence_id, int monitor_transitions);
+
+   /**
+    * Modify a particular geofence option.
+    * Parameters:
+    *    geofence_id - The id for the geofence.
+    *    options - Various options associated with the geofence. See
+    *        GeofenceOptions structure for details.
+    */
+   void (*modify_geofence_option) (int32_t geofence_id, GeofenceOptions* options);
+
+   /**
+    * Remove a list of geofences. After the function returns, no notifications
+    * should be sent.
+    * Parameter:
+    *     number_of_geofences - The number of geofences that needed to be added.
+    *     geofence_id - Pointer to array of geofence_ids to be removed.
+    */
+   void (*remove_geofences) (int32_t number_of_geofences, int32_t* geofence_id);
+} FlpGeofencingInterface;
+
+__END_DECLS
+
+#endif /* ANDROID_INCLUDE_HARDWARE_FLP_H */
+
diff --git a/include/hardware/sensors.h b/include/hardware/sensors.h
index 7778e8f..f938d1b 100644
--- a/include/hardware/sensors.h
+++ b/include/hardware/sensors.h
@@ -761,45 +761,51 @@
     int64_t timestamp;
 
     union {
-        float           data[16];
+        union {
+            float           data[16];
 
-        /* acceleration values are in meter per second per second (m/s^2) */
-        sensors_vec_t   acceleration;
+            /* acceleration values are in meter per second per second (m/s^2) */
+            sensors_vec_t   acceleration;
 
-        /* magnetic vector values are in micro-Tesla (uT) */
-        sensors_vec_t   magnetic;
+            /* magnetic vector values are in micro-Tesla (uT) */
+            sensors_vec_t   magnetic;
 
-        /* orientation values are in degrees */
-        sensors_vec_t   orientation;
+            /* orientation values are in degrees */
+            sensors_vec_t   orientation;
 
-        /* gyroscope values are in rad/s */
-        sensors_vec_t   gyro;
+            /* gyroscope values are in rad/s */
+            sensors_vec_t   gyro;
 
-        /* temperature is in degrees centigrade (Celsius) */
-        float           temperature;
+            /* temperature is in degrees centigrade (Celsius) */
+            float           temperature;
 
-        /* distance in centimeters */
-        float           distance;
+            /* distance in centimeters */
+            float           distance;
 
-        /* light in SI lux units */
-        float           light;
+            /* light in SI lux units */
+            float           light;
 
-        /* pressure in hectopascal (hPa) */
-        float           pressure;
+            /* pressure in hectopascal (hPa) */
+            float           pressure;
 
-        /* relative humidity in percent */
-        float           relative_humidity;
+            /* relative humidity in percent */
+            float           relative_humidity;
 
-        /* step-counter */
-        uint64_t        step_counter;
+            /* uncalibrated gyroscope values are in rad/s */
+            uncalibrated_event_t uncalibrated_gyro;
 
-        /* uncalibrated gyroscope values are in rad/s */
-        uncalibrated_event_t uncalibrated_gyro;
+            /* uncalibrated magnetometer values are in micro-Teslas */
+            uncalibrated_event_t uncalibrated_magnetic;
+        };
 
-        /* uncalibrated magnetometer values are in micro-Teslas */
-        uncalibrated_event_t uncalibrated_magnetic;
+        union {
+            uint64_t        data[8];
+
+            /* step-counter */
+            uint64_t        step_counter;
+        } u64;
     };
-    uint32_t        reserved1[4];
+    uint32_t reserved1[4];
 } sensors_event_t;
 
 
diff --git a/modules/camera/Android.mk b/modules/camera/Android.mk
index eebffc1..e02a143 100644
--- a/modules/camera/Android.mk
+++ b/modules/camera/Android.mk
@@ -26,11 +26,14 @@
 LOCAL_SRC_FILES := \
 	CameraHAL.cpp \
 	Camera.cpp \
+	Metadata.cpp \
+	Stream.cpp \
 
 LOCAL_SHARED_LIBRARIES := \
 	libcamera_metadata \
 	libcutils \
 	liblog \
+	libsync \
 
 LOCAL_CFLAGS += -Wall -Wextra -fvisibility=hidden
 
diff --git a/modules/camera/Camera.cpp b/modules/camera/Camera.cpp
index 203b772..137c5f6 100644
--- a/modules/camera/Camera.cpp
+++ b/modules/camera/Camera.cpp
@@ -17,7 +17,12 @@
 #include <cstdlib>
 #include <pthread.h>
 #include <hardware/camera3.h>
+#include <sync/sync.h>
+#include <system/camera_metadata.h>
+#include <system/graphics.h>
 #include "CameraHAL.h"
+#include "Metadata.h"
+#include "Stream.h"
 
 //#define LOG_NDEBUG 0
 #define LOG_TAG "Camera"
@@ -25,9 +30,14 @@
 
 #define ATRACE_TAG (ATRACE_TAG_CAMERA | ATRACE_TAG_HAL)
 #include <cutils/trace.h>
+#include "ScopedTrace.h"
 
 #include "Camera.h"
 
+#define CAMERA_SYNC_TIMEOUT 5000 // in msecs
+
+#define ARRAY_SIZE(a) (sizeof(a) / sizeof(a[0]))
+
 namespace default_camera_hal {
 
 extern "C" {
@@ -42,14 +52,19 @@
 
 Camera::Camera(int id)
   : mId(id),
+    mStaticInfo(NULL),
     mBusy(false),
-    mCallbackOps(NULL)
+    mCallbackOps(NULL),
+    mStreams(NULL),
+    mNumStreams(0),
+    mSettings(NULL)
 {
     pthread_mutex_init(&mMutex,
                        NULL); // No pthread mutex attributes.
 
     memset(&mDevice, 0, sizeof(mDevice));
     mDevice.common.tag    = HARDWARE_DEVICE_TAG;
+    mDevice.common.version = CAMERA_DEVICE_API_VERSION_3_0;
     mDevice.common.close  = close_device;
     mDevice.ops           = const_cast<camera3_device_ops_t*>(&sOps);
     mDevice.priv          = this;
@@ -62,11 +77,10 @@
 int Camera::open(const hw_module_t *module, hw_device_t **device)
 {
     ALOGI("%s:%d: Opening camera device", __func__, mId);
-    ATRACE_BEGIN(__func__);
+    CAMTRACE_CALL();
     pthread_mutex_lock(&mMutex);
     if (mBusy) {
         pthread_mutex_unlock(&mMutex);
-        ATRACE_END();
         ALOGE("%s:%d: Error! Camera device already opened", __func__, mId);
         return -EBUSY;
     }
@@ -77,18 +91,35 @@
     *device = &mDevice.common;
 
     pthread_mutex_unlock(&mMutex);
-    ATRACE_END();
     return 0;
 }
 
+int Camera::getInfo(struct camera_info *info)
+{
+    int ret = 0;
+
+    info->facing = CAMERA_FACING_FRONT;
+    info->orientation = 0;
+    info->device_version = mDevice.common.version;
+
+    pthread_mutex_lock(&mMutex);
+    if (mStaticInfo == NULL) {
+        ret = initStaticInfo();
+    }
+    pthread_mutex_unlock(&mMutex);
+
+    info->static_camera_characteristics = mStaticInfo;
+
+    return ret;
+}
+
 int Camera::close()
 {
     ALOGI("%s:%d: Closing camera device", __func__, mId);
-    ATRACE_BEGIN(__func__);
+    CAMTRACE_CALL();
     pthread_mutex_lock(&mMutex);
     if (!mBusy) {
         pthread_mutex_unlock(&mMutex);
-        ATRACE_END();
         ALOGE("%s:%d: Error! Camera device not open", __func__, mId);
         return -EINVAL;
     }
@@ -97,7 +128,6 @@
     mBusy = false;
 
     pthread_mutex_unlock(&mMutex);
-    ATRACE_END();
     return 0;
 }
 
@@ -105,43 +135,471 @@
 {
     ALOGV("%s:%d: callback_ops=%p", __func__, mId, callback_ops);
     mCallbackOps = callback_ops;
+    // Create standard settings templates
+    // 0 is invalid as template
+    mTemplates[0] = NULL;
+    // CAMERA3_TEMPLATE_PREVIEW = 1
+    mTemplates[1] = new Metadata(ANDROID_CONTROL_MODE_OFF,
+            ANDROID_CONTROL_CAPTURE_INTENT_PREVIEW);
+    // CAMERA3_TEMPLATE_STILL_CAPTURE = 2
+    mTemplates[2] = new Metadata(ANDROID_CONTROL_MODE_OFF,
+            ANDROID_CONTROL_CAPTURE_INTENT_STILL_CAPTURE);
+    // CAMERA3_TEMPLATE_VIDEO_RECORD = 3
+    mTemplates[3] = new Metadata(ANDROID_CONTROL_MODE_OFF,
+            ANDROID_CONTROL_CAPTURE_INTENT_VIDEO_RECORD);
+    // CAMERA3_TEMPLATE_VIDEO_SNAPSHOT = 4
+    mTemplates[4] = new Metadata(ANDROID_CONTROL_MODE_OFF,
+            ANDROID_CONTROL_CAPTURE_INTENT_VIDEO_SNAPSHOT);
+    // CAMERA3_TEMPLATE_STILL_ZERO_SHUTTER_LAG = 5
+    mTemplates[5] = new Metadata(ANDROID_CONTROL_MODE_OFF,
+            ANDROID_CONTROL_CAPTURE_INTENT_ZERO_SHUTTER_LAG);
+    // Pre-generate metadata structures
+    for (int i = 1; i < CAMERA3_TEMPLATE_COUNT; i++) {
+        mTemplates[i]->generate();
+    }
+    // TODO: create vendor templates
     return 0;
 }
 
-int Camera::configureStreams(camera3_stream_configuration_t *stream_list)
+int Camera::initStaticInfo()
 {
-    ALOGV("%s:%d: stream_list=%p", __func__, mId, stream_list);
-    // TODO: validate input, create internal stream representations
+    /*
+     * Setup static camera info.  This will have to customized per camera
+     * device.
+     */
+
+    /* android.control */
+    int32_t android_control_ae_available_target_fps_ranges[] = {30, 30};
+    mMetadata.addInt32(ANDROID_CONTROL_AE_AVAILABLE_TARGET_FPS_RANGES,
+            ARRAY_SIZE(android_control_ae_available_target_fps_ranges),
+            android_control_ae_available_target_fps_ranges);
+
+    int32_t android_control_ae_compensation_range[] = {-4, 4};
+    mMetadata.addInt32(ANDROID_CONTROL_AE_COMPENSATION_RANGE,
+            ARRAY_SIZE(android_control_ae_compensation_range),
+            android_control_ae_compensation_range);
+
+    camera_metadata_rational_t android_control_ae_compensation_step[] = {{2,1}};
+    mMetadata.addRational(ANDROID_CONTROL_AE_COMPENSATION_STEP,
+            ARRAY_SIZE(android_control_ae_compensation_step),
+            android_control_ae_compensation_step);
+
+    int32_t android_control_max_regions[] = {1};
+    mMetadata.addInt32(ANDROID_CONTROL_MAX_REGIONS,
+            ARRAY_SIZE(android_control_max_regions),
+            android_control_max_regions);
+
+    /* android.jpeg */
+    int32_t android_jpeg_available_thumbnail_sizes[] = {0, 0, 128, 96};
+    mMetadata.addInt32(ANDROID_JPEG_AVAILABLE_THUMBNAIL_SIZES,
+            ARRAY_SIZE(android_jpeg_available_thumbnail_sizes),
+            android_jpeg_available_thumbnail_sizes);
+
+    /* android.lens */
+    float android_lens_info_available_focal_lengths[] = {1.0};
+    mMetadata.addFloat(ANDROID_LENS_INFO_AVAILABLE_FOCAL_LENGTHS,
+            ARRAY_SIZE(android_lens_info_available_focal_lengths),
+            android_lens_info_available_focal_lengths);
+
+    /* android.request */
+    int32_t android_request_max_num_output_streams[] = {0, 3, 1};
+    mMetadata.addInt32(ANDROID_REQUEST_MAX_NUM_OUTPUT_STREAMS,
+            ARRAY_SIZE(android_request_max_num_output_streams),
+            android_request_max_num_output_streams);
+
+    /* android.scaler */
+    int32_t android_scaler_available_formats[] = {
+            HAL_PIXEL_FORMAT_RAW_SENSOR,
+            HAL_PIXEL_FORMAT_BLOB,
+            HAL_PIXEL_FORMAT_RGBA_8888,
+            HAL_PIXEL_FORMAT_IMPLEMENTATION_DEFINED,
+            // These are handled by YCbCr_420_888
+            //        HAL_PIXEL_FORMAT_YV12,
+            //        HAL_PIXEL_FORMAT_YCrCb_420_SP,
+            HAL_PIXEL_FORMAT_YCbCr_420_888};
+    mMetadata.addInt32(ANDROID_SCALER_AVAILABLE_FORMATS,
+            ARRAY_SIZE(android_scaler_available_formats),
+            android_scaler_available_formats);
+
+    int64_t android_scaler_available_jpeg_min_durations[] = {1};
+    mMetadata.addInt64(ANDROID_SCALER_AVAILABLE_JPEG_MIN_DURATIONS,
+            ARRAY_SIZE(android_scaler_available_jpeg_min_durations),
+            android_scaler_available_jpeg_min_durations);
+
+    int32_t android_scaler_available_jpeg_sizes[] = {640, 480};
+    mMetadata.addInt32(ANDROID_SCALER_AVAILABLE_JPEG_SIZES,
+            ARRAY_SIZE(android_scaler_available_jpeg_sizes),
+            android_scaler_available_jpeg_sizes);
+
+    float android_scaler_available_max_digital_zoom[] = {1};
+    mMetadata.addFloat(ANDROID_SCALER_AVAILABLE_MAX_DIGITAL_ZOOM,
+            ARRAY_SIZE(android_scaler_available_max_digital_zoom),
+            android_scaler_available_max_digital_zoom);
+
+    int64_t android_scaler_available_processed_min_durations[] = {1};
+    mMetadata.addInt64(ANDROID_SCALER_AVAILABLE_PROCESSED_MIN_DURATIONS,
+            ARRAY_SIZE(android_scaler_available_processed_min_durations),
+            android_scaler_available_processed_min_durations);
+
+    int32_t android_scaler_available_processed_sizes[] = {640, 480};
+    mMetadata.addInt32(ANDROID_SCALER_AVAILABLE_PROCESSED_SIZES,
+            ARRAY_SIZE(android_scaler_available_processed_sizes),
+            android_scaler_available_processed_sizes);
+
+    int64_t android_scaler_available_raw_min_durations[] = {1};
+    mMetadata.addInt64(ANDROID_SCALER_AVAILABLE_RAW_MIN_DURATIONS,
+            ARRAY_SIZE(android_scaler_available_raw_min_durations),
+            android_scaler_available_raw_min_durations);
+
+    int32_t android_scaler_available_raw_sizes[] = {640, 480};
+    mMetadata.addInt32(ANDROID_SCALER_AVAILABLE_RAW_SIZES,
+            ARRAY_SIZE(android_scaler_available_raw_sizes),
+            android_scaler_available_raw_sizes);
+
+    /* android.sensor */
+
+    int32_t android_sensor_info_active_array_size[] = {0, 0, 640, 480};
+    mMetadata.addInt32(ANDROID_SENSOR_INFO_ACTIVE_ARRAY_SIZE,
+            ARRAY_SIZE(android_sensor_info_active_array_size),
+            android_sensor_info_active_array_size);
+
+    int32_t android_sensor_info_available_sensitivities[] =
+            {100, 200, 400, 800, 1600};
+    mMetadata.addInt32(ANDROID_SENSOR_INFO_AVAILABLE_SENSITIVITIES,
+            ARRAY_SIZE(android_sensor_info_available_sensitivities),
+            android_sensor_info_available_sensitivities);
+
+    int64_t android_sensor_info_max_frame_duration[] = {30000000000};
+    mMetadata.addInt64(ANDROID_SENSOR_INFO_MAX_FRAME_DURATION,
+            ARRAY_SIZE(android_sensor_info_max_frame_duration),
+            android_sensor_info_max_frame_duration);
+
+    float android_sensor_info_physical_size[] = {3.2, 2.4};
+    mMetadata.addFloat(ANDROID_SENSOR_INFO_PHYSICAL_SIZE,
+            ARRAY_SIZE(android_sensor_info_physical_size),
+            android_sensor_info_physical_size);
+
+    int32_t android_sensor_info_pixel_array_size[] = {640, 480};
+    mMetadata.addInt32(ANDROID_SENSOR_INFO_PIXEL_ARRAY_SIZE,
+            ARRAY_SIZE(android_sensor_info_pixel_array_size),
+            android_sensor_info_pixel_array_size);
+
+    int32_t android_sensor_orientation[] = {0};
+    mMetadata.addInt32(ANDROID_SENSOR_ORIENTATION,
+            ARRAY_SIZE(android_sensor_orientation),
+            android_sensor_orientation);
+
+    /* End of static camera characteristics */
+
+    mStaticInfo = mMetadata.generate();
+
     return 0;
 }
 
+int Camera::configureStreams(camera3_stream_configuration_t *stream_config)
+{
+    camera3_stream_t *astream;
+    Stream **newStreams = NULL;
+
+    CAMTRACE_CALL();
+    ALOGV("%s:%d: stream_config=%p", __func__, mId, stream_config);
+
+    if (stream_config == NULL) {
+        ALOGE("%s:%d: NULL stream configuration array", __func__, mId);
+        return -EINVAL;
+    }
+    if (stream_config->num_streams == 0) {
+        ALOGE("%s:%d: Empty stream configuration array", __func__, mId);
+        return -EINVAL;
+    }
+
+    // Create new stream array
+    newStreams = new Stream*[stream_config->num_streams];
+    ALOGV("%s:%d: Number of Streams: %d", __func__, mId,
+            stream_config->num_streams);
+
+    pthread_mutex_lock(&mMutex);
+
+    // Mark all current streams unused for now
+    for (int i = 0; i < mNumStreams; i++)
+        mStreams[i]->mReuse = false;
+    // Fill new stream array with reused streams and new streams
+    for (unsigned int i = 0; i < stream_config->num_streams; i++) {
+        astream = stream_config->streams[i];
+        if (astream->max_buffers > 0) {
+            ALOGV("%s:%d: Reusing stream %d", __func__, mId, i);
+            newStreams[i] = reuseStream(astream);
+        } else {
+            ALOGV("%s:%d: Creating new stream %d", __func__, mId, i);
+            newStreams[i] = new Stream(mId, astream);
+        }
+
+        if (newStreams[i] == NULL) {
+            ALOGE("%s:%d: Error processing stream %d", __func__, mId, i);
+            goto err_out;
+        }
+        astream->priv = newStreams[i];
+    }
+
+    // Verify the set of streams in aggregate
+    if (!isValidStreamSet(newStreams, stream_config->num_streams)) {
+        ALOGE("%s:%d: Invalid stream set", __func__, mId);
+        goto err_out;
+    }
+
+    // Set up all streams (calculate usage/max_buffers for each)
+    setupStreams(newStreams, stream_config->num_streams);
+
+    // Destroy all old streams and replace stream array with new one
+    destroyStreams(mStreams, mNumStreams);
+    mStreams = newStreams;
+    mNumStreams = stream_config->num_streams;
+
+    // Clear out last seen settings metadata
+    setSettings(NULL);
+
+    pthread_mutex_unlock(&mMutex);
+    return 0;
+
+err_out:
+    // Clean up temporary streams, preserve existing mStreams/mNumStreams
+    destroyStreams(newStreams, stream_config->num_streams);
+    pthread_mutex_unlock(&mMutex);
+    return -EINVAL;
+}
+
+void Camera::destroyStreams(Stream **streams, int count)
+{
+    if (streams == NULL)
+        return;
+    for (int i = 0; i < count; i++) {
+        // Only destroy streams that weren't reused
+        if (streams[i] != NULL && !streams[i]->mReuse)
+            delete streams[i];
+    }
+    delete [] streams;
+}
+
+Stream *Camera::reuseStream(camera3_stream_t *astream)
+{
+    Stream *priv = reinterpret_cast<Stream*>(astream->priv);
+    // Verify the re-used stream's parameters match
+    if (!priv->isValidReuseStream(mId, astream)) {
+        ALOGE("%s:%d: Mismatched parameter in reused stream", __func__, mId);
+        return NULL;
+    }
+    // Mark stream to be reused
+    priv->mReuse = true;
+    return priv;
+}
+
+bool Camera::isValidStreamSet(Stream **streams, int count)
+{
+    int inputs = 0;
+    int outputs = 0;
+
+    if (streams == NULL) {
+        ALOGE("%s:%d: NULL stream configuration streams", __func__, mId);
+        return false;
+    }
+    if (count == 0) {
+        ALOGE("%s:%d: Zero count stream configuration streams", __func__, mId);
+        return false;
+    }
+    // Validate there is at most one input stream and at least one output stream
+    for (int i = 0; i < count; i++) {
+        // A stream may be both input and output (bidirectional)
+        if (streams[i]->isInputType())
+            inputs++;
+        if (streams[i]->isOutputType())
+            outputs++;
+    }
+    ALOGV("%s:%d: Configuring %d output streams and %d input streams",
+            __func__, mId, outputs, inputs);
+    if (outputs < 1) {
+        ALOGE("%s:%d: Stream config must have >= 1 output", __func__, mId);
+        return false;
+    }
+    if (inputs > 1) {
+        ALOGE("%s:%d: Stream config must have <= 1 input", __func__, mId);
+        return false;
+    }
+    // TODO: check for correct number of Bayer/YUV/JPEG/Encoder streams
+    return true;
+}
+
+void Camera::setupStreams(Stream **streams, int count)
+{
+    /*
+     * This is where the HAL has to decide internally how to handle all of the
+     * streams, and then produce usage and max_buffer values for each stream.
+     * Note, the stream array has been checked before this point for ALL invalid
+     * conditions, so it must find a successful configuration for this stream
+     * array.  The HAL may not return an error from this point.
+     *
+     * In this demo HAL, we just set all streams to be the same dummy values;
+     * real implementations will want to avoid USAGE_SW_{READ|WRITE}_OFTEN.
+     */
+    for (int i = 0; i < count; i++) {
+        uint32_t usage = 0;
+
+        if (streams[i]->isOutputType())
+            usage |= GRALLOC_USAGE_SW_WRITE_OFTEN |
+                     GRALLOC_USAGE_HW_CAMERA_WRITE;
+        if (streams[i]->isInputType())
+            usage |= GRALLOC_USAGE_SW_READ_OFTEN |
+                     GRALLOC_USAGE_HW_CAMERA_READ;
+
+        streams[i]->setUsage(usage);
+        streams[i]->setMaxBuffers(1);
+    }
+}
+
 int Camera::registerStreamBuffers(const camera3_stream_buffer_set_t *buf_set)
 {
     ALOGV("%s:%d: buffer_set=%p", __func__, mId, buf_set);
-    // TODO: register buffers with hardware
-    return 0;
+    if (buf_set == NULL) {
+        ALOGE("%s:%d: NULL buffer set", __func__, mId);
+        return -EINVAL;
+    }
+    if (buf_set->stream == NULL) {
+        ALOGE("%s:%d: NULL stream handle", __func__, mId);
+        return -EINVAL;
+    }
+    Stream *stream = reinterpret_cast<Stream*>(buf_set->stream->priv);
+    return stream->registerBuffers(buf_set);
 }
 
 const camera_metadata_t* Camera::constructDefaultRequestSettings(int type)
 {
     ALOGV("%s:%d: type=%d", __func__, mId, type);
-    // TODO: return statically built default request
-    return NULL;
+
+    if (type < 1 || type >= CAMERA3_TEMPLATE_COUNT) {
+        ALOGE("%s:%d: Invalid template request type: %d", __func__, mId, type);
+        return NULL;
+    }
+    return mTemplates[type]->generate();
 }
 
 int Camera::processCaptureRequest(camera3_capture_request_t *request)
 {
+    camera3_capture_result result;
+
     ALOGV("%s:%d: request=%p", __func__, mId, request);
-    ATRACE_BEGIN(__func__);
+    CAMTRACE_CALL();
 
     if (request == NULL) {
         ALOGE("%s:%d: NULL request recieved", __func__, mId);
-        ATRACE_END();
         return -EINVAL;
     }
 
-    // TODO: verify request; submit request to hardware
-    ATRACE_END();
+    ALOGV("%s:%d: Request Frame:%d Settings:%p", __func__, mId,
+            request->frame_number, request->settings);
+
+    // NULL indicates use last settings
+    if (request->settings == NULL) {
+        if (mSettings == NULL) {
+            ALOGE("%s:%d: NULL settings without previous set Frame:%d Req:%p",
+                    __func__, mId, request->frame_number, request);
+            return -EINVAL;
+        }
+    } else {
+        setSettings(request->settings);
+    }
+
+    if (request->input_buffer != NULL) {
+        ALOGV("%s:%d: Reprocessing input buffer %p", __func__, mId,
+                request->input_buffer);
+
+        if (!isValidReprocessSettings(request->settings)) {
+            ALOGE("%s:%d: Invalid settings for reprocess request: %p",
+                    __func__, mId, request->settings);
+            return -EINVAL;
+        }
+    } else {
+        ALOGV("%s:%d: Capturing new frame.", __func__, mId);
+
+        if (!isValidCaptureSettings(request->settings)) {
+            ALOGE("%s:%d: Invalid settings for capture request: %p",
+                    __func__, mId, request->settings);
+            return -EINVAL;
+        }
+    }
+
+    if (request->num_output_buffers <= 0) {
+        ALOGE("%s:%d: Invalid number of output buffers: %d", __func__, mId,
+                request->num_output_buffers);
+        return -EINVAL;
+    }
+    result.num_output_buffers = request->num_output_buffers;
+    result.output_buffers = new camera3_stream_buffer_t[result.num_output_buffers];
+    for (unsigned int i = 0; i < request->num_output_buffers; i++) {
+        int res = processCaptureBuffer(&request->output_buffers[i],
+                const_cast<camera3_stream_buffer_t*>(&result.output_buffers[i]));
+        if (res)
+            goto err_out;
+    }
+
+    result.frame_number = request->frame_number;
+    // TODO: return actual captured/reprocessed settings
+    result.result = request->settings;
+    // TODO: asynchronously return results
+    mCallbackOps->process_capture_result(mCallbackOps, &result);
+
+    return 0;
+
+err_out:
+    delete [] result.output_buffers;
+    // TODO: this should probably be a total device failure; transient for now
+    return -EINVAL;
+}
+
+void Camera::setSettings(const camera_metadata_t *new_settings)
+{
+    if (mSettings != NULL) {
+        free_camera_metadata(mSettings);
+        mSettings = NULL;
+    }
+
+    if (new_settings != NULL)
+        mSettings = clone_camera_metadata(new_settings);
+}
+
+bool Camera::isValidCaptureSettings(const camera_metadata_t* /*settings*/)
+{
+    // TODO: reject settings that cannot be captured
+    return true;
+}
+
+bool Camera::isValidReprocessSettings(const camera_metadata_t* /*settings*/)
+{
+    // TODO: reject settings that cannot be reprocessed
+    // input buffers unimplemented, use this to reject reprocessing requests
+    ALOGE("%s:%d: Input buffer reprocessing not implemented", __func__, mId);
+    return false;
+}
+
+int Camera::processCaptureBuffer(const camera3_stream_buffer_t *in,
+        camera3_stream_buffer_t *out)
+{
+    int res = sync_wait(in->acquire_fence, CAMERA_SYNC_TIMEOUT);
+    if (res == -ETIME) {
+        ALOGE("%s:%d: Timeout waiting on buffer acquire fence", __func__, mId);
+        return res;
+    } else if (res) {
+        ALOGE("%s:%d: Error waiting on buffer acquire fence: %s(%d)",
+                __func__, mId, strerror(-res), res);
+        return res;
+    }
+
+    out->stream = in->stream;
+    out->buffer = in->buffer;
+    out->status = CAMERA3_BUFFER_STATUS_OK;
+    // TODO: use driver-backed release fences
+    out->acquire_fence = -1;
+    out->release_fence = -1;
+
+    // TODO: lock and software-paint buffer
     return 0;
 }
 
@@ -153,7 +611,7 @@
 
 void Camera::dump(int fd)
 {
-    ALOGV("%s:%d: Dumping to fd %d", fd);
+    ALOGV("%s:%d: Dumping to fd %d", __func__, mId, fd);
     // TODO: dprintf all relevant state to fd
 }
 
diff --git a/modules/camera/Camera.h b/modules/camera/Camera.h
index f2ad093..c7ee52d 100644
--- a/modules/camera/Camera.h
+++ b/modules/camera/Camera.h
@@ -20,6 +20,8 @@
 #include <pthread.h>
 #include <hardware/hardware.h>
 #include <hardware/camera3.h>
+#include "Metadata.h"
+#include "Stream.h"
 
 namespace default_camera_hal {
 // Camera represents a physical camera on a device.
@@ -35,6 +37,7 @@
 
         // Common Camera Device Operations (see <hardware/camera_common.h>)
         int open(const hw_module_t *module, hw_device_t **device);
+        int getInfo(struct camera_info *info);
         int close();
 
         // Camera v3 Device Operations (see <hardware/camera3.h>)
@@ -50,8 +53,32 @@
         camera3_device_t mDevice;
 
     private:
+        // Separate initialization method for static metadata
+        int initStaticInfo();
+        // Reuse a stream already created by this device
+        Stream *reuseStream(camera3_stream_t *astream);
+        // Destroy all streams in a stream array, and the array itself
+        void destroyStreams(Stream **array, int count);
+        // Verify a set of streams is valid in aggregate
+        bool isValidStreamSet(Stream **array, int count);
+        // Calculate usage and max_bufs of each stream
+        void setupStreams(Stream **array, int count);
+        // Copy new settings for re-use and clean up old settings.
+        void setSettings(const camera_metadata_t *new_settings);
+        // Verify settings are valid for a capture
+        bool isValidCaptureSettings(const camera_metadata_t *settings);
+        // Verify settings are valid for reprocessing an input buffer
+        bool isValidReprocessSettings(const camera_metadata_t *settings);
+        // Process an output buffer
+        int processCaptureBuffer(const camera3_stream_buffer_t *in,
+                camera3_stream_buffer_t *out);
+
         // Identifier used by framework to distinguish cameras
         const int mId;
+        // Metadata containing persistent camera characteristics
+        Metadata mMetadata;
+        // camera_metadata structure containing static characteristics
+        camera_metadata_t *mStaticInfo;
         // Busy flag indicates camera is in use
         bool mBusy;
         // Camera device operations handle shared by all devices
@@ -60,6 +87,14 @@
         const camera3_callback_ops_t *mCallbackOps;
         // Lock protecting the Camera object for modifications
         pthread_mutex_t mMutex;
+        // Array of handles to streams currently in use by the device
+        Stream **mStreams;
+        // Number of streams in mStreams
+        int mNumStreams;
+        // Static array of standard camera settings templates
+        Metadata *mTemplates[CAMERA3_TEMPLATE_COUNT];
+        // Most recent request settings seen, memoized to be reused
+        camera_metadata_t *mSettings;
 };
 } // namespace default_camera_hal
 
diff --git a/modules/camera/CameraHAL.cpp b/modules/camera/CameraHAL.cpp
index 6cae7d2..dfbbe4c 100644
--- a/modules/camera/CameraHAL.cpp
+++ b/modules/camera/CameraHAL.cpp
@@ -76,7 +76,7 @@
         return -ENODEV;
     }
     // TODO: return device-specific static metadata
-    return 0;
+    return mCameras[id]->getInfo(info);
 }
 
 int CameraHAL::setCallbacks(const camera_module_callbacks_t *callbacks)
@@ -90,11 +90,14 @@
 {
     int id;
     char *nameEnd;
-    Camera *cam;
 
     ALOGV("%s: module=%p, name=%s, device=%p", __func__, mod, name, dev);
+    if (*name == '\0') {
+        ALOGE("%s: Invalid camera id name is NULL", __func__);
+        return -EINVAL;
+    }
     id = strtol(name, &nameEnd, 10);
-    if (nameEnd != NULL) {
+    if (*nameEnd != '\0') {
         ALOGE("%s: Invalid camera id name %s", __func__, name);
         return -EINVAL;
     } else if (id < 0 || id >= mNumberOfCameras) {
diff --git a/modules/camera/Metadata.cpp b/modules/camera/Metadata.cpp
new file mode 100644
index 0000000..362a087
--- /dev/null
+++ b/modules/camera/Metadata.cpp
@@ -0,0 +1,238 @@
+/*
+ * Copyright (C) 2013 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <pthread.h>
+#include <system/camera_metadata.h>
+
+//#define LOG_NDEBUG 0
+#define LOG_TAG "Metadata"
+#include <cutils/log.h>
+
+#define ATRACE_TAG (ATRACE_TAG_CAMERA | ATRACE_TAG_HAL)
+#include <cutils/trace.h>
+#include "ScopedTrace.h"
+
+#include "Metadata.h"
+
+namespace default_camera_hal {
+
+Metadata::Metadata()
+  : mHead(NULL),
+    mTail(NULL),
+    mEntryCount(0),
+    mDataCount(0),
+    mGenerated(NULL),
+    mDirty(true)
+{
+    // NULL (default) pthread mutex attributes
+    pthread_mutex_init(&mMutex, NULL);
+}
+
+Metadata::~Metadata()
+{
+    if (mGenerated != NULL)
+        free_camera_metadata(mGenerated);
+}
+
+Metadata::Metadata(uint8_t mode, uint8_t intent)
+  : mHead(NULL),
+    mTail(NULL),
+    mEntryCount(0),
+    mDataCount(0),
+    mGenerated(NULL),
+    mDirty(true)
+{
+    pthread_mutex_init(&mMutex, NULL);
+
+    if (validate(ANDROID_CONTROL_MODE, TYPE_BYTE, 1)) {
+        int res = add(ANDROID_CONTROL_MODE, 1, &mode);
+        if (res != 0) {
+            ALOGE("%s: Unable to add mode to template!", __func__);
+        }
+    } else {
+        ALOGE("%s: Invalid mode constructing template!", __func__);
+    }
+
+    if (validate(ANDROID_CONTROL_CAPTURE_INTENT, TYPE_BYTE, 1)) {
+        int res = add(ANDROID_CONTROL_CAPTURE_INTENT, 1, &intent);
+        if (res != 0) {
+            ALOGE("%s: Unable to add capture intent to template!", __func__);
+        }
+    } else {
+        ALOGE("%s: Invalid capture intent constructing template!", __func__);
+    }
+}
+
+int Metadata::addUInt8(uint32_t tag, int count, uint8_t *data)
+{
+    if (!validate(tag, TYPE_BYTE, count)) return -EINVAL;
+    return add(tag, count, data);
+}
+
+int Metadata::addInt32(uint32_t tag, int count, int32_t *data)
+{
+    if (!validate(tag, TYPE_INT32, count)) return -EINVAL;
+    return add(tag, count, data);
+}
+
+int Metadata::addFloat(uint32_t tag, int count, float *data)
+{
+    if (!validate(tag, TYPE_FLOAT, count)) return -EINVAL;
+    return add(tag, count, data);
+}
+
+int Metadata::addInt64(uint32_t tag, int count, int64_t *data)
+{
+    if (!validate(tag, TYPE_INT64, count)) return -EINVAL;
+    return add(tag, count, data);
+}
+
+int Metadata::addDouble(uint32_t tag, int count, double *data)
+{
+    if (!validate(tag, TYPE_DOUBLE, count)) return -EINVAL;
+    return add(tag, count, data);
+}
+
+int Metadata::addRational(uint32_t tag, int count,
+        camera_metadata_rational_t *data)
+{
+    if (!validate(tag, TYPE_RATIONAL, count)) return -EINVAL;
+    return add(tag, count, data);
+}
+
+bool Metadata::validate(uint32_t tag, int tag_type, int count)
+{
+    if (get_camera_metadata_tag_type(tag) < 0) {
+        ALOGE("%s: Invalid metadata entry tag: %d", __func__, tag);
+        return false;
+    }
+    if (tag_type < 0 || tag_type >= NUM_TYPES) {
+        ALOGE("%s: Invalid metadata entry tag type: %d", __func__, tag_type);
+        return false;
+    }
+    if (tag_type != get_camera_metadata_tag_type(tag)) {
+        ALOGE("%s: Tag %d called with incorrect type: %s(%d)", __func__, tag,
+                camera_metadata_type_names[tag_type], tag_type);
+        return false;
+    }
+    if (count < 1) {
+        ALOGE("%s: Invalid metadata entry count: %d", __func__, count);
+        return false;
+    }
+    return true;
+}
+
+int Metadata::add(uint32_t tag, int count, void *tag_data)
+{
+    int tag_type = get_camera_metadata_tag_type(tag);
+    size_t type_sz = camera_metadata_type_size[tag_type];
+
+    // Allocate array to hold new metadata
+    void *data = malloc(count * type_sz);
+    if (data == NULL)
+        return -ENOMEM;
+    memcpy(data, tag_data, count * type_sz);
+
+    pthread_mutex_lock(&mMutex);
+    mEntryCount++;
+    mDataCount += calculate_camera_metadata_entry_data_size(tag_type, count);
+    push(new Entry(tag, data, count));
+    mDirty = true;
+    pthread_mutex_unlock(&mMutex);
+    return 0;
+}
+
+camera_metadata_t* Metadata::generate()
+{
+    Entry *current;
+
+    pthread_mutex_lock(&mMutex);
+    // Reuse if old generated metadata still valid
+    if (!mDirty && mGenerated != NULL) {
+        ALOGV("%s: Reusing generated metadata at %p", __func__, mGenerated);
+        goto out;
+    }
+    // Destroy old metadata
+    if (mGenerated != NULL) {
+        ALOGV("%s: Freeing generated metadata at %p", __func__, mGenerated);
+        free_camera_metadata(mGenerated);
+        mGenerated = NULL;
+    }
+    // Generate new metadata structure
+    ALOGV("%s: Generating new camera metadata structure, Entries:%d Data:%d",
+            __func__, mEntryCount, mDataCount);
+    mGenerated = allocate_camera_metadata(mEntryCount, mDataCount);
+    if (mGenerated == NULL) {
+        ALOGE("%s: Failed to allocate metadata (%d entries %d data)",
+                __func__, mEntryCount, mDataCount);
+        goto out;
+    }
+    // Walk list of entries adding each one to newly allocated metadata
+    for (current = mHead; current != NULL; current = current->mNext) {
+        int res = add_camera_metadata_entry(mGenerated, current->mTag,
+                current->mData, current->mCount);
+        if (res != 0) {
+            ALOGE("%s: Failed to add camera metadata: %d", __func__, res);
+            free_camera_metadata(mGenerated);
+            mGenerated = NULL;
+            goto out;
+        }
+    }
+
+out:
+    pthread_mutex_unlock(&mMutex);
+    return mGenerated;
+}
+
+Metadata::Entry::Entry(uint32_t tag, void *data, int count)
+  : mNext(NULL),
+    mPrev(NULL),
+    mTag(tag),
+    mData(data),
+    mCount(count)
+{
+}
+
+void Metadata::push(Entry *e)
+{
+    if (mHead == NULL) {
+        mHead = mTail = e;
+    } else {
+        mTail->insertAfter(e);
+        mTail = e;
+    }
+}
+
+Metadata::Entry::~Entry()
+{
+    if (mNext != NULL)
+        mNext->mPrev = mPrev;
+    if (mPrev != NULL)
+        mPrev->mNext = mNext;
+}
+
+void Metadata::Entry::insertAfter(Entry *e)
+{
+    if (e == NULL)
+        return;
+    if (mNext != NULL)
+        mNext->mPrev = e;
+    e->mNext = mNext;
+    e->mPrev = this;
+    mNext = e;
+}
+
+} // namespace default_camera_hal
diff --git a/modules/camera/Metadata.h b/modules/camera/Metadata.h
new file mode 100644
index 0000000..22d2f22
--- /dev/null
+++ b/modules/camera/Metadata.h
@@ -0,0 +1,79 @@
+/*
+ * Copyright (C) 2013 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef METADATA_H_
+#define METADATA_H_
+
+#include <hardware/camera3.h>
+#include <hardware/gralloc.h>
+#include <system/camera_metadata.h>
+#include <system/graphics.h>
+
+namespace default_camera_hal {
+// Metadata is a convenience class for dealing with libcamera_metadata
+class Metadata {
+    public:
+        Metadata();
+        ~Metadata();
+        // Constructor used for request metadata templates
+        Metadata(uint8_t mode, uint8_t intent);
+
+        // Parse and add an entry
+        int addUInt8(uint32_t tag, int count, uint8_t *data);
+        int addInt32(uint32_t tag, int count, int32_t *data);
+        int addFloat(uint32_t tag, int count, float *data);
+        int addInt64(uint32_t tag, int count, int64_t *data);
+        int addDouble(uint32_t tag, int count, double *data);
+        int addRational(uint32_t tag, int count,
+                camera_metadata_rational_t *data);
+        // Generate a camera_metadata structure and fill it with internal data
+        camera_metadata_t *generate();
+
+    private:
+        // Validate the tag, type and count for a metadata entry
+        bool validate(uint32_t tag, int tag_type, int count);
+        // Add a verified tag with data to this Metadata structure
+        int add(uint32_t tag, int count, void *tag_data);
+
+        class Entry {
+            public:
+                Entry(uint32_t tag, void *data, int count);
+                ~Entry();
+                Entry *mNext;
+                Entry *mPrev;
+                const uint32_t mTag;
+                const void *mData;
+                const int mCount;
+                void insertAfter(Entry *e);
+        };
+        // List ends
+        Entry *mHead;
+        Entry *mTail;
+        // Append entry to list
+        void push(Entry *e);
+        // Total of entries and entry data size
+        int mEntryCount;
+        int mDataCount;
+        // Save generated metadata, invalidated on update
+        camera_metadata_t *mGenerated;
+        // Flag to force metadata regeneration
+        bool mDirty;
+        // Lock protecting the Metadata object for modifications
+        pthread_mutex_t mMutex;
+};
+} // namespace default_camera_hal
+
+#endif // METADATA_H_
diff --git a/modules/camera/ScopedTrace.h b/modules/camera/ScopedTrace.h
new file mode 100644
index 0000000..ed00570
--- /dev/null
+++ b/modules/camera/ScopedTrace.h
@@ -0,0 +1,51 @@
+/*
+ * Copyright (C) 2013 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef CAMERA_SCOPED_TRACE_H
+#define CAMERA_SCOPED_TRACE_H
+
+#include <stdint.h>
+#include <cutils/trace.h>
+
+// See <cutils/trace.h> for more tracing macros.
+
+// CAMTRACE_NAME traces the beginning and end of the current scope.  To trace
+// the correct start and end times this macro should be declared first in the
+// scope body.
+#define CAMTRACE_NAME(name) ScopedTrace ___tracer(ATRACE_TAG, name)
+// CAMTRACE_CALL is an ATRACE_NAME that uses the current function name.
+#define CAMTRACE_CALL() CAMTRACE_NAME(__FUNCTION__)
+
+namespace default_camera_hal {
+
+class ScopedTrace {
+public:
+inline ScopedTrace(uint64_t tag, const char* name)
+    : mTag(tag) {
+    atrace_begin(mTag,name);
+}
+
+inline ~ScopedTrace() {
+    atrace_end(mTag);
+}
+
+private:
+    uint64_t mTag;
+};
+
+}; // namespace default_camera_hal
+
+#endif // CAMERA_SCOPED_TRACE_H
diff --git a/modules/camera/Stream.cpp b/modules/camera/Stream.cpp
new file mode 100644
index 0000000..aae7adb
--- /dev/null
+++ b/modules/camera/Stream.cpp
@@ -0,0 +1,177 @@
+/*
+ * Copyright (C) 2013 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <pthread.h>
+#include <hardware/camera3.h>
+#include <hardware/gralloc.h>
+#include <system/graphics.h>
+
+//#define LOG_NDEBUG 0
+#define LOG_TAG "Stream"
+#include <cutils/log.h>
+
+#define ATRACE_TAG (ATRACE_TAG_CAMERA | ATRACE_TAG_HAL)
+#include <cutils/trace.h>
+#include "ScopedTrace.h"
+
+#include "Stream.h"
+
+namespace default_camera_hal {
+
+Stream::Stream(int id, camera3_stream_t *s)
+  : mReuse(false),
+    mId(id),
+    mStream(s),
+    mType(s->stream_type),
+    mWidth(s->width),
+    mHeight(s->height),
+    mFormat(s->format),
+    mUsage(0),
+    mMaxBuffers(0),
+    mRegistered(false),
+    mBuffers(0),
+    mNumBuffers(0)
+{
+    // NULL (default) pthread mutex attributes
+    pthread_mutex_init(&mMutex, NULL);
+}
+
+Stream::~Stream()
+{
+    pthread_mutex_lock(&mMutex);
+    unregisterBuffers_L();
+    pthread_mutex_unlock(&mMutex);
+}
+
+void Stream::setUsage(uint32_t usage)
+{
+    pthread_mutex_lock(&mMutex);
+    if (usage != mUsage) {
+        mUsage = usage;
+        mStream->usage = usage;
+        unregisterBuffers_L();
+    }
+    pthread_mutex_unlock(&mMutex);
+}
+
+void Stream::setMaxBuffers(uint32_t max_buffers)
+{
+    pthread_mutex_lock(&mMutex);
+    if (max_buffers != mMaxBuffers) {
+        mMaxBuffers = max_buffers;
+        mStream->max_buffers = max_buffers;
+        unregisterBuffers_L();
+    }
+    pthread_mutex_unlock(&mMutex);
+}
+
+int Stream::getType()
+{
+    return mType;
+}
+
+bool Stream::isInputType()
+{
+    return mType == CAMERA3_STREAM_INPUT ||
+        mType == CAMERA3_STREAM_BIDIRECTIONAL;
+}
+
+bool Stream::isOutputType()
+{
+    return mType == CAMERA3_STREAM_OUTPUT ||
+        mType == CAMERA3_STREAM_BIDIRECTIONAL;
+}
+
+bool Stream::isRegistered()
+{
+    return mRegistered;
+}
+
+bool Stream::isValidReuseStream(int id, camera3_stream_t *s)
+{
+    if (id != mId) {
+        ALOGE("%s:%d: Invalid camera id for reuse. Got %d expect %d",
+                __func__, mId, id, mId);
+        return false;
+    }
+    if (s != mStream) {
+        ALOGE("%s:%d: Invalid stream handle for reuse. Got %p expect %p",
+                __func__, mId, s, mStream);
+        return false;
+    }
+    if (s->stream_type != mType) {
+        // TODO: prettyprint type string
+        ALOGE("%s:%d: Mismatched type in reused stream. Got %d expect %d",
+                __func__, mId, s->stream_type, mType);
+        return false;
+    }
+    if (s->format != mFormat) {
+        // TODO: prettyprint format string
+        ALOGE("%s:%d: Mismatched format in reused stream. Got %d expect %d",
+                __func__, mId, s->format, mFormat);
+        return false;
+    }
+    if (s->width != mWidth) {
+        ALOGE("%s:%d: Mismatched width in reused stream. Got %d expect %d",
+                __func__, mId, s->width, mWidth);
+        return false;
+    }
+    if (s->height != mHeight) {
+        ALOGE("%s:%d: Mismatched height in reused stream. Got %d expect %d",
+                __func__, mId, s->height, mHeight);
+        return false;
+    }
+    return true;
+}
+
+int Stream::registerBuffers(const camera3_stream_buffer_set_t *buf_set)
+{
+    CAMTRACE_CALL();
+
+    if (buf_set->stream != mStream) {
+        ALOGE("%s:%d: Buffer set for invalid stream. Got %p expect %p",
+                __func__, mId, buf_set->stream, mStream);
+        return -EINVAL;
+    }
+
+    pthread_mutex_lock(&mMutex);
+
+    mNumBuffers = buf_set->num_buffers;
+    mBuffers = new buffer_handle_t*[mNumBuffers];
+
+    for (unsigned int i = 0; i < mNumBuffers; i++) {
+        ALOGV("%s:%d: Registering buffer %p", __func__, mId,
+                buf_set->buffers[i]);
+        mBuffers[i] = buf_set->buffers[i];
+        // TODO: register buffers with hw, handle error cases
+    }
+    mRegistered = true;
+
+    pthread_mutex_unlock(&mMutex);
+
+    return 0;
+}
+
+// This must only be called with mMutex held
+void Stream::unregisterBuffers_L()
+{
+    mRegistered = false;
+    mNumBuffers = 0;
+    delete [] mBuffers;
+    // TODO: unregister buffers from hw
+}
+
+} // namespace default_camera_hal
diff --git a/modules/camera/Stream.h b/modules/camera/Stream.h
new file mode 100644
index 0000000..34abd95
--- /dev/null
+++ b/modules/camera/Stream.h
@@ -0,0 +1,79 @@
+/*
+ * Copyright (C) 2013 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef STREAM_H_
+#define STREAM_H_
+
+#include <hardware/camera3.h>
+#include <hardware/gralloc.h>
+#include <system/graphics.h>
+
+namespace default_camera_hal {
+// Stream represents a single input or output stream for a camera device.
+class Stream {
+    public:
+        Stream(int id, camera3_stream_t *s);
+        ~Stream();
+
+        // validate that astream's parameters match this stream's parameters
+        bool isValidReuseStream(int id, camera3_stream_t *s);
+
+        // Register buffers with hardware
+        int registerBuffers(const camera3_stream_buffer_set_t *buf_set);
+
+        void setUsage(uint32_t usage);
+        void setMaxBuffers(uint32_t max_buffers);
+
+        int getType();
+        bool isInputType();
+        bool isOutputType();
+        bool isRegistered();
+
+        // This stream is being reused. Used in stream configuration passes
+        bool mReuse;
+
+    private:
+        // Clean up buffer state. must be called with mMutex held.
+        void unregisterBuffers_L();
+
+        // The camera device id this stream belongs to
+        const int mId;
+        // Handle to framework's stream, used as a cookie for buffers
+        camera3_stream_t *mStream;
+        // Stream type: CAMERA3_STREAM_* (see <hardware/camera3.h>)
+        const int mType;
+        // Width in pixels of the buffers in this stream
+        const uint32_t mWidth;
+        // Height in pixels of the buffers in this stream
+        const uint32_t mHeight;
+        // Gralloc format: HAL_PIXEL_FORMAT_* (see <system/graphics.h>)
+        const int mFormat;
+        // Gralloc usage mask : GRALLOC_USAGE_* (see <hardware/gralloc.h>)
+        uint32_t mUsage;
+        // Max simultaneous in-flight buffers for this stream
+        uint32_t mMaxBuffers;
+        // Buffers have been registered for this stream and are ready
+        bool mRegistered;
+        // Array of handles to buffers currently in use by the stream
+        buffer_handle_t **mBuffers;
+        // Number of buffers in mBuffers
+        unsigned int mNumBuffers;
+        // Lock protecting the Stream object for modifications
+        pthread_mutex_t mMutex;
+};
+} // namespace default_camera_hal
+
+#endif // STREAM_H_
diff --git a/tests/hwc/Android.mk b/tests/hwc/Android.mk
new file mode 100644
index 0000000..4cae9eb
--- /dev/null
+++ b/tests/hwc/Android.mk
@@ -0,0 +1,14 @@
+LOCAL_PATH:= $(call my-dir)
+
+include $(CLEAR_VARS)
+LOCAL_MODULE := libcnativewindow 
+LOCAL_SRC_FILES := cnativewindow.c util.c
+include $(BUILD_STATIC_LIBRARY)
+
+include $(CLEAR_VARS)
+LOCAL_MODULE := hwc-test-arrows
+LOCAL_SRC_FILES := test-arrows.c
+LOCAL_STATIC_LIBRARIES := libcnativewindow
+LOCAL_SHARED_LIBRARIES := libEGL libGLESv2 libdl libhardware
+LOCAL_CFLAGS := -DGL_GLEXT_PROTOTYPES
+include $(BUILD_EXECUTABLE)
diff --git a/tests/hwc/cnativewindow.c b/tests/hwc/cnativewindow.c
new file mode 100644
index 0000000..474ceec
--- /dev/null
+++ b/tests/hwc/cnativewindow.c
@@ -0,0 +1,578 @@
+/*
+ * Copyright (C) 2013 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <errno.h>
+
+#include <pthread.h>
+
+#include <hardware/hardware.h>
+#include <hardware/gralloc.h>
+#include <hardware/hwcomposer.h>
+
+#include <system/window.h>
+#include <cutils/native_handle.h>
+
+// normalize and shorten type names
+typedef struct android_native_base_t aBase;
+typedef struct ANativeWindowBuffer aBuffer;
+typedef struct ANativeWindow aWindow;
+
+static int trace_level = 1;
+
+#define _TRACE(n,fmt...) \
+	do { if (trace_level >= n) fprintf(stderr, "CNW: " fmt); } while (0)
+
+#define ERROR(fmt...) _TRACE(0, fmt)
+#define INFO(fmt...) _TRACE(1, fmt)
+#define LOG(fmt...) _TRACE(2, fmt)
+#define TRACE(fmt...) _TRACE(3, fmt)
+
+#define QCT_WORKAROUND 1
+
+typedef struct CNativeBuffer {
+	aBuffer base;
+	struct CNativeBuffer *next;
+	struct CNativeBuffer *prev;
+	int ffd;
+} CNativeBuffer;
+
+typedef struct CNativeWindow {
+	aWindow base;
+
+	hwc_composer_device_1_t *hwc;
+	framebuffer_device_t *fb;
+	alloc_device_t *gr;
+
+	pthread_mutex_t lock;
+	pthread_cond_t cvar;
+
+	aBuffer *front;
+	aBuffer *spare;
+
+	CNativeBuffer free_buffer_queue;
+
+	unsigned width;
+	unsigned height;
+	unsigned xdpi;
+	unsigned ydpi;
+	unsigned format;
+
+	hwc_display_contents_1_t *dclist[HWC_NUM_DISPLAY_TYPES];
+
+	hwc_display_contents_1_t dc;
+	hwc_layer_1_t layer[4];
+} CNativeWindow;
+
+static inline CNativeBuffer *from_abuffer(aBuffer *buf) {
+	return (CNativeBuffer*) buf;
+}
+
+static CNativeBuffer *get_front(struct CNativeBuffer *queue) {
+	CNativeBuffer *buf = queue->next;
+	if (buf == queue)
+		return 0;
+	buf->next->prev = queue;
+	queue->next = buf->next;
+	buf->next = buf->prev = 0;
+	return buf;
+}
+
+static void put_front(struct CNativeBuffer *queue, aBuffer *_buf) {
+	struct CNativeBuffer *buf = (struct CNativeBuffer *) _buf;
+	buf->prev = queue;
+	buf->next = queue->next;
+	queue->next->prev = buf;
+	queue->next = buf;
+}
+
+static void put_back(struct CNativeBuffer *queue, aBuffer *_buf) {
+	struct CNativeBuffer *buf = (struct CNativeBuffer *) _buf;
+	buf->next = queue;
+	buf->prev = queue->prev;
+	queue->prev->next = buf;
+	queue->prev = buf;
+}
+
+static void cnw_inc_ref(aBase *base) { TRACE("buf %p ref++\n",base); }
+static void cnw_dec_ref(aBase *base) { TRACE("buf %p ref--\n",base); }
+
+static inline CNativeWindow *from_base(aWindow *base) {
+	return (CNativeWindow *) base;
+}
+
+static inline CNativeWindow *from_base_const(const aWindow *base) {
+	return (CNativeWindow *) base;
+}
+
+static int cnw_set_swap_interval(aWindow *base, int interval) {
+	CNativeWindow *win = from_base(base);
+	if (win->fb && win->fb->setSwapInterval)
+		return win->fb->setSwapInterval(win->fb, interval);
+	return 0;
+}
+
+static int cnw_dequeue_buffer1(aWindow *base, aBuffer **buf, int *ffd) {
+	CNativeWindow *win = from_base(base);
+	CNativeBuffer *cnb;
+
+	pthread_mutex_lock(&win->lock);
+
+	while ((cnb = get_front(&win->free_buffer_queue)) == 0) {
+		pthread_cond_wait(&win->cvar, &win->lock);
+	}
+
+	*ffd = cnb->ffd;
+	*buf = &cnb->base;
+	cnb->ffd = -1;
+	LOG("<< dequeue buffer %p %d\n", *buf, *ffd);
+
+	pthread_mutex_unlock(&win->lock);
+	return 0;
+}
+
+static int cnw_lock_buffer0(aWindow *base, aBuffer *buffer) {
+	return 0;
+}
+
+static void set_layer(hwc_layer_1_t *dl, aBuffer *buf, int ffd) {
+	int right = buf->width;
+	int bottom = buf->height;
+
+	dl->compositionType = HWC_FRAMEBUFFER;
+	dl->hints = 0;
+	dl->flags = 0;
+
+	dl->handle = buf->handle;
+	dl->transform = 0;
+	dl->blending = HWC_BLENDING_NONE;
+	dl->sourceCrop.left = 0;
+	dl->sourceCrop.top = 0;
+	dl->sourceCrop.right = right;
+	dl->sourceCrop.bottom = bottom;
+	dl->displayFrame.left = 0;
+	dl->displayFrame.top = 0;
+	dl->displayFrame.right = right;
+	dl->displayFrame.bottom = bottom;
+	dl->visibleRegionScreen.numRects = 1;
+	dl->visibleRegionScreen.rects = &dl->displayFrame;
+
+	dl->acquireFenceFd = ffd;
+	dl->releaseFenceFd = -1;
+}
+
+static void hwc_post(CNativeWindow *win, aBuffer *buf, int ffd) {
+	hwc_composer_device_1_t *hwc = win->hwc;
+	hwc_display_contents_1_t *dc = &(win->dc);
+	hwc_layer_1_t *dl = win->dc.hwLayers;
+	int r, i;
+
+	dc->retireFenceFd = -1;
+	dc->outbufAcquireFenceFd = -1;
+	dc->flags = HWC_GEOMETRY_CHANGED;
+	dc->numHwLayers = 1;
+
+	// some hwcomposers fail if these are NULL
+	dc->dpy = (void*) 0xdeadbeef;
+	dc->sur = (void*) 0xdeadbeef;
+
+	set_layer(&dl[0], buf, ffd);
+
+	if (QCT_WORKAROUND) {
+		set_layer(&dl[1], win->spare, -1);
+		dl[1].compositionType = HWC_FRAMEBUFFER_TARGET;
+		dc->numHwLayers++;
+	}
+
+	r = hwc->prepare(hwc, HWC_NUM_DISPLAY_TYPES, win->dclist);
+	if (r) {
+		ERROR("hwc->prepare failed r=%d\n",r);
+		return;
+	}
+
+//	for (i = 0; i < dc->numHwLayers; i++)
+//		LOG("dl[%d] ctype=0x%08x hints=0x%08x flags=0x%08x\n", i,
+//			dl[i].compositionType, dl[0].hints, dl[0].flags);
+
+	r = hwc->set(hwc, HWC_NUM_DISPLAY_TYPES, win->dclist);
+	if (r) {
+		ERROR("hwc->set failed, r=%d\n", r);
+		return;
+	}
+
+	if (dc->retireFenceFd != -1)
+		close(dc->retireFenceFd);
+	if (dl->releaseFenceFd != -1) {
+		CNativeBuffer *cnb = from_abuffer(buf);
+		cnb->ffd = dl->releaseFenceFd;
+	}
+	if (QCT_WORKAROUND)
+		if (dl[1].releaseFenceFd != -1)
+			close(dl[1].releaseFenceFd);
+}
+
+static int cnw_queue_buffer1(aWindow *base, aBuffer *buffer, int ffd) {
+	CNativeWindow *win = from_base(base);
+	int res;
+	LOG(">> queue buffer %p %d\n", buffer, ffd);
+	if (win->fb) {
+		res = win->fb->post(win->fb, buffer->handle);
+		if (ffd != -1)
+			close(ffd);
+	} else {
+		hwc_post(win, buffer, ffd);
+		res = 0;
+	}
+	pthread_mutex_lock(&win->lock);
+	if (win->front)
+		put_back(&win->free_buffer_queue, win->front);
+	win->front = buffer;
+	pthread_cond_signal(&win->cvar);
+	pthread_mutex_unlock(&win->lock);
+
+	return res;
+}
+
+static int cnw_cancel_buffer1(aWindow *base, aBuffer *buf, int ffd) {
+	CNativeWindow *win = from_base(base);
+	CNativeBuffer *cnb = from_abuffer(buf);
+	LOG("<< cancel buffer %p %d\n", buf, ffd);
+	cnb->ffd = ffd;
+	pthread_mutex_lock(&win->lock);
+	put_front(&win->free_buffer_queue, buf);
+	pthread_mutex_unlock(&win->lock);
+	return 0;
+}
+
+static int cnw_dequeue_buffer0(aWindow *base, aBuffer **buf) {
+	int ffd = -1;
+	int r;
+	r = cnw_dequeue_buffer1(base, buf, &ffd);
+	if (ffd != -1)
+		close(ffd);
+	return r;
+}
+
+static int cnw_queue_buffer0(aWindow *base, aBuffer *buf) {
+	return cnw_queue_buffer1(base, buf, -1);
+}
+
+static int cnw_cancel_buffer0(aWindow *base, aBuffer *buf) {
+	return cnw_cancel_buffer1(base, buf, -1);
+}
+
+static int cnw_query(const aWindow *base, int what, int *value) {
+	CNativeWindow *win = from_base_const(base);
+
+	switch (what) {
+	case NATIVE_WINDOW_WIDTH:
+	case NATIVE_WINDOW_DEFAULT_WIDTH:
+		*value = win->width;
+		TRACE("query window width: %d\n", *value);
+		return 0;
+	case NATIVE_WINDOW_HEIGHT:
+	case NATIVE_WINDOW_DEFAULT_HEIGHT:
+		*value = win->height;
+		TRACE("query window height: %d\n", *value);
+		return 0;
+	case NATIVE_WINDOW_FORMAT:
+		*value = win->format;
+		TRACE("query window format: %d\n", *value);
+		return 0;
+	case NATIVE_WINDOW_TRANSFORM_HINT:
+		TRACE("query transform hint: 0\n");
+		*value = 0;
+		return 0;
+	case NATIVE_WINDOW_MIN_UNDEQUEUED_BUFFERS:
+		TRACE("query min undequeued buffers: 1\n");
+		*value = 1;
+		return 0;
+	default:
+		*value = 0;
+		ERROR("query %d unknown!\n", what);
+		return -EINVAL;
+	}
+}
+
+static int cnw_perform(aWindow *base, int op, ...) {
+	CNativeWindow *win = from_base(base);
+	va_list ap;
+	va_start(ap, op);
+
+	switch (op) {
+	case NATIVE_WINDOW_SET_USAGE:
+		TRACE("set usage %d\n", va_arg(ap,int));
+		return 0;
+	case NATIVE_WINDOW_CONNECT:
+	case NATIVE_WINDOW_DISCONNECT:
+	case NATIVE_WINDOW_API_CONNECT:
+	case NATIVE_WINDOW_API_DISCONNECT:
+		return 0;
+	case NATIVE_WINDOW_SET_BUFFERS_FORMAT:
+		TRACE("set buffers format %d\n", va_arg(ap,int));
+		return 0;
+	case NATIVE_WINDOW_SET_BUFFERS_TRANSFORM:
+		TRACE("set buffers transform %d\n", va_arg(ap,int));
+		return 0;
+	case NATIVE_WINDOW_SET_BUFFERS_TIMESTAMP:
+		TRACE("set buffers timestamp %lld\n", va_arg(ap,long long));
+		return 0;
+	case NATIVE_WINDOW_SET_SCALING_MODE:
+		TRACE("set scaling mode %d\n", va_arg(ap,int));
+		return 0;
+	case NATIVE_WINDOW_SET_BUFFERS_DIMENSIONS: {
+		int w = va_arg(ap,int);
+		int h = va_arg(ap,int);
+		if ((w == win->width) && (h == win->height)) {
+			TRACE("set buffers dimensions %d x %d\n", w, h);
+			return 0;
+		}
+		ERROR("cannot resize buffers to %d x %d\n", w, h);
+		return -1;
+	}
+	default:
+		ERROR("perform %d unknown!\n", op);
+		return -ENODEV;
+	}
+}
+
+static void hwc_invalidate(const struct hwc_procs *procs) {}
+static void hwc_vsync(const struct hwc_procs *procs, int disp, int64_t ts) {}
+static void hwc_hotplug(const struct hwc_procs *procs, int disp, int conn) {}
+
+struct hwc_procs hprocs = {
+	.invalidate = hwc_invalidate,
+	.vsync = hwc_vsync,
+	.hotplug = hwc_hotplug,
+};
+
+uint32_t attrs[] = {
+	HWC_DISPLAY_WIDTH,
+	HWC_DISPLAY_HEIGHT,
+	HWC_DISPLAY_VSYNC_PERIOD,
+	HWC_DISPLAY_DPI_X,
+	HWC_DISPLAY_DPI_Y,
+	HWC_DISPLAY_NO_ATTRIBUTE,
+};
+
+static int hwc_init(CNativeWindow *win) {
+	hw_module_t const* module;
+	hwc_composer_device_1_t *hwc;
+	unsigned i;
+	int r;
+	uint32_t configs[32];
+	uint32_t numconfigs = 32;
+	int32_t values[8];
+
+	if (hw_get_module(HWC_HARDWARE_MODULE_ID, &module) != 0) {
+		ERROR("cannot open hw composer module\n");
+		return -ENODEV;
+	}
+
+	if (hwc_open_1(module, &hwc)) {
+		ERROR("cannot open hwc device\n");
+		return -ENODEV;
+	}
+	win->hwc = hwc;
+
+	LOG("hwc version 0x%08x\n", hwc->common.version);
+
+	if ((hwc->common.version & 0xFFFF0000) < 0x01010000) {
+		ERROR("hwc version less than 1.1\n");
+		hwc_close_1(hwc);
+		return -ENODEV;
+	}
+
+	hwc->registerProcs(hwc, &hprocs);
+
+	if (hwc->getDisplayConfigs(hwc, 0, configs, &numconfigs)) {
+		ERROR("cannot get configs\n");
+		return -ENODEV;
+	}
+	for (i = 0; i < numconfigs; i++)
+		LOG("cfg[%d] = 0x%08x\n", i, configs[i]);
+
+	if ((r = hwc->getDisplayAttributes(hwc, 0, configs[0], attrs, values))) {
+		ERROR("cannot get attributes %d\n", r);
+		return -ENODEV;
+	}
+
+	win->width = values[0];
+	win->height = values[1];
+	win->xdpi = values[3];
+	win->ydpi = values[4];
+	win->format = HAL_PIXEL_FORMAT_RGBA_8888;
+
+	hwc->blank(hwc, 0, 0);
+
+	win->dclist[0] = &(win->dc);
+	return 0;
+}
+
+static aBuffer *cnw_alloc(CNativeWindow *win, unsigned format, unsigned usage) {
+	CNativeBuffer *cnb;
+	aBuffer *buf;
+	int err;
+
+	if (!(cnb = malloc(sizeof(CNativeBuffer))))
+		return 0;
+
+	buf = &cnb->base;
+	cnb->ffd = -1;
+
+	buf->common.magic = ANDROID_NATIVE_BUFFER_MAGIC;
+	buf->common.version = sizeof(aBuffer);
+	buf->common.incRef = cnw_inc_ref;
+	buf->common.decRef = cnw_dec_ref;
+
+	buf->width = win->width;
+	buf->height = win->height;
+	buf->format = format;
+	buf->usage = usage;
+
+	err = win->gr->alloc(win->gr, win->width, win->height,
+		format, usage, &buf->handle, &buf->stride);
+	if (err) {
+		ERROR("gralloc of %d x %d failed: err=%d\n",
+			win->width, win->height, err);
+		free(buf);
+		return 0;
+	}
+	INFO("alloc buffer %p %d x %d\n", buf, win->width, win->height);
+	return buf;
+}
+
+static int cnw_init(CNativeWindow *win) {
+	hw_module_t const* module;
+	framebuffer_device_t *fb = NULL;
+	alloc_device_t *gr;
+	int err, i, n;
+	unsigned usage, format;
+
+	memset(win, 0, sizeof(CNativeWindow));
+
+	win->free_buffer_queue.next = &(win->free_buffer_queue);
+	win->free_buffer_queue.prev = &(win->free_buffer_queue);
+
+	if (hw_get_module(GRALLOC_HARDWARE_MODULE_ID, &module) != 0) {
+		ERROR("cannot open gralloc module\n");
+		return -ENODEV;
+	}
+
+	if (hwc_init(win)) {
+		ERROR("cannot open hwcomposer, trying legacy fb HAL\n");
+		err = framebuffer_open(module, &fb);
+		if (err) {
+			ERROR("cannot open fb HAL (%s)", strerror(-err));
+			return -ENODEV;
+		}
+		win->width = fb->width;
+		win->height = fb->height;
+		win->format = fb->format;
+		win->xdpi = fb->xdpi;
+		win->ydpi = fb->ydpi;
+		win->fb = fb;
+	}
+
+	INFO("display %d x %d fmt=%d\n",
+		win->width, win->height, win->format);
+
+	err = gralloc_open(module, &gr);
+	if (err) {
+		ERROR("couldn't open gralloc HAL (%s)", strerror(-err));
+		return -ENODEV;
+	}
+	win->gr = gr;
+
+	usage = GRALLOC_USAGE_HW_FB |
+		GRALLOC_USAGE_HW_COMPOSER |
+		GRALLOC_USAGE_HW_RENDER;
+
+	for (i = 0; i < 2; i++) {
+		aBuffer *buf = cnw_alloc(win, win->format, usage);
+		if (!buf)
+			return -ENOMEM;
+		put_back(&win->free_buffer_queue, buf);
+	}
+
+	if (!win->fb && QCT_WORKAROUND) {
+		win->spare = cnw_alloc(win, win->format, usage);
+		if (!win->spare)
+			return -ENOMEM;
+	}
+
+	// Disgusting, but we need to init these "const" fields
+	// and unlike C++ we can't use const_cast<>
+	*((float*) &win->base.xdpi) = win->xdpi;
+	*((float*) &win->base.ydpi) = win->ydpi;
+	*((int*) &win->base.minSwapInterval) = 1;
+	*((int*) &win->base.maxSwapInterval) = 1;
+
+	win->base.common.magic = ANDROID_NATIVE_WINDOW_MAGIC;
+	win->base.common.version = sizeof(aWindow);
+	win->base.common.incRef = cnw_inc_ref;
+	win->base.common.decRef = cnw_dec_ref;
+
+	win->base.setSwapInterval = cnw_set_swap_interval;
+	win->base.dequeueBuffer_DEPRECATED = cnw_dequeue_buffer0;
+	win->base.lockBuffer_DEPRECATED = cnw_lock_buffer0;
+	win->base.queueBuffer_DEPRECATED = cnw_queue_buffer0;
+	win->base.query = cnw_query;
+	win->base.perform = cnw_perform;
+	win->base.cancelBuffer_DEPRECATED = cnw_cancel_buffer0;
+	win->base.dequeueBuffer = cnw_dequeue_buffer1;
+	win->base.queueBuffer = cnw_queue_buffer1;
+	win->base.cancelBuffer = cnw_cancel_buffer1;
+
+	pthread_mutex_init(&win->lock, NULL);
+	pthread_cond_init(&win->cvar, NULL);
+
+	return 0;
+}
+
+void cnw_destroy(CNativeWindow *win) {
+	if (win->fb)
+		framebuffer_close(win->fb);
+	if (win->hwc)
+		hwc_close_1(win->hwc);
+	if (win->gr)
+		gralloc_close(win->gr);
+	free(win);
+}
+
+CNativeWindow *cnw_create(void) {
+	CNativeWindow *win;
+	char *x;
+	if ((x = getenv("CNWDEBUG")))
+		trace_level = atoi(x);
+	if (!(win = malloc(sizeof(CNativeWindow))))
+		return NULL;
+	if (cnw_init(win)) {
+		cnw_destroy(win);
+		return NULL;
+	}
+	return win;
+}
+
+void cnw_info(CNativeWindow *win, unsigned *w, unsigned *h, unsigned *fmt) {
+	*w = win->width;
+	*h = win->height;
+	*fmt = win->format;
+}
+
diff --git a/tests/hwc/test-arrows.c b/tests/hwc/test-arrows.c
new file mode 100644
index 0000000..a35faa7
--- /dev/null
+++ b/tests/hwc/test-arrows.c
@@ -0,0 +1,164 @@
+/*
+ * Copyright (C) 2013 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <stdlib.h>
+#include <stdio.h>
+
+#include <EGL/egl.h>
+#include <GLES2/gl2.h>
+
+#include "util.h"
+
+static const char gVertexShader[] =
+	"attribute vec4 aPosition;\n"
+	"uniform mat4 uTransform;\n"
+	"varying vec4 vTexCoord;\n"
+	"void main() {\n"
+	"  gl_Position = aPosition * uTransform;\n"
+	"  vTexCoord = aPosition * vec4(1.0/16.0,-1.0/16.0,0.0,0.0);\n"
+	"}\n";
+
+static const char gFragmentShader[] =
+	"precision mediump float;\n"
+	"uniform sampler2D uTexture;\n"
+	"uniform float uAnim;\n"
+	"varying vec4 vTexCoord;\n"
+	"void main() {\n"
+	"  vec2 tc = vec2(vTexCoord.x, uAnim + vTexCoord.y);\n"
+	"  gl_FragColor = texture2D(uTexture, tc);\n"
+	"}\n";
+
+static GLuint pgm;
+static GLint aPosition, uTransform, uTexture, uAnim;
+
+static GLfloat vtx[2 * 3 * 2];
+static GLfloat mtx[16];
+
+//#define R (0xFF0000FF)
+#define R (0xFF000000)
+#define G (0xFF00FF00)
+uint32_t t32[] = {
+	R, R, R, R, R, R, R, G, G, R, R, R, R, R, R, R,
+	R, R, R, R, R, R, G, G, G, G, R, R, R, R, R, R,
+	R, R, R, R, R, G, G, G, G, G, G, R, R, R, R, R,
+	R, R, R, R, G, G, G, G, G, G, G, G, R, R, R, R,
+	R, R, R, G, G, G, G, G, G, G, G, G, G, R, R, R,
+	R, R, G, G, G, G, G, G, G, G, G, G, G, G, R, R,
+	R, R, G, G, G, G, G, G, G, G, G, G, G, G, R, R,
+	R, R, R, R, R, R, G, G, G, G, R, R, R, R, R, R,
+	R, R, R, R, R, R, G, G, G, G, R, R, R, R, R, R,
+	R, R, R, R, R, R, G, G, G, G, R, R, R, R, R, R,
+	R, R, R, R, R, R, G, G, G, G, R, R, R, R, R, R,
+	R, R, R, R, R, R, G, G, G, G, R, R, R, R, R, R,
+	R, R, R, R, R, R, G, G, G, G, R, R, R, R, R, R,
+	R, R, R, R, R, R, R, R, R, R, R, R, R, R, R, R,
+	R, R, R, R, R, R, R, R, R, R, R, R, R, R, R, R,
+	R, R, R, R, R, R, R, R, R, R, R, R, R, R, R, R,
+};
+#undef R
+#undef G
+
+int prepare(int w, int h) {
+	GLuint texid;
+
+	int left = w / 4;
+	int top = h / 4;
+	int right = (w / 4) * 3;
+	int bottom = (h / 4) * 3;
+
+	vtx[0] = left;
+	vtx[1] = top;
+	vtx[2] = left;
+	vtx[3] = bottom;
+	vtx[4] = right;
+	vtx[5] = bottom;
+
+	vtx[6] = right;
+	vtx[7] = bottom;
+	vtx[8] = right;
+	vtx[9] = top;
+	vtx[10] = left;
+	vtx[11] = top;
+
+	matrix_init_ortho(mtx, w, h);
+
+	pgm = load_program(gVertexShader, gFragmentShader);
+	if (!pgm)
+		return -1;
+
+	aPosition = glGetAttribLocation(pgm, "aPosition");
+	uTexture = glGetUniformLocation(pgm, "uTexture");
+	uTransform = glGetUniformLocation(pgm, "uTransform");
+	uAnim = glGetUniformLocation(pgm, "uAnim");
+
+	glViewport(0, 0, w, h);
+
+	glGenTextures(1, &texid);
+	glActiveTexture(GL_TEXTURE0);
+	glBindTexture(GL_TEXTURE_2D, texid);
+	glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_NEAREST);
+	glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_NEAREST);
+	glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_S, GL_REPEAT);
+	glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_T, GL_REPEAT);
+	glEnable(GL_TEXTURE_2D);
+	glTexImage2D(GL_TEXTURE_2D, 0, GL_RGBA, 16, 16, 0,
+		GL_RGBA, GL_UNSIGNED_BYTE, t32);
+
+	return 0;
+}
+
+static float anim = 0.0;
+
+void render() {
+	anim += 0.1;
+	if (anim >= 16.0) anim = 0.0;
+
+	glClearColor(0.0f, 0.0f, 0.0f, 1.0f);
+	glClear(GL_DEPTH_BUFFER_BIT | GL_COLOR_BUFFER_BIT);
+	glUseProgram(pgm);
+	glUniform1i(uTexture, 0);
+	glUniform1f(uAnim, anim);
+	glUniformMatrix4fv(uTransform, 1, 0, mtx);
+	glVertexAttribPointer(aPosition, 2, GL_FLOAT, GL_FALSE, 0, vtx);
+	glEnableVertexAttribArray(aPosition);
+	glDrawArrays(GL_TRIANGLES, 0, 6);
+}
+
+int main(int argc, char **argv) {
+	EGLDisplay display;
+	EGLSurface surface;
+	int w, h, count;
+
+	if (argc > 1)
+		count = atoi(argv[1]);
+
+	if (egl_create(&display, &surface, &w, &h))
+		return -1;
+
+	if (prepare(w, h))
+		return -1;
+
+	for (;;) {
+		render();
+		eglSwapBuffers(display, surface);
+		if (count > 0)
+			if (--count == 0)
+				break;
+	}
+
+	egl_destroy(display, surface);
+	return 0;
+}
diff --git a/tests/hwc/util.c b/tests/hwc/util.c
new file mode 100644
index 0000000..8931305
--- /dev/null
+++ b/tests/hwc/util.c
@@ -0,0 +1,236 @@
+/*
+ * Copyright (C) 2013 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <stdarg.h>
+
+#include <EGL/egl.h>
+#include <GLES2/gl2.h>
+
+#include <system/graphics.h>
+
+#include "util.h"
+
+void matrix_init_ortho(GLfloat *m, float w, float h) {
+	m[0] = 2.0 / w;
+	m[1] = 0.0;
+	m[2] = 0.0;
+	m[3] = -1.0;
+	m[4] = 0.0;
+	m[5] = 2.0 / h;
+	m[6] = 0.0;
+	m[7] = -1.0;
+	m[8] = 0.0;
+	m[9] = 0.0;
+	m[10] -1.0;
+	m[11] = 0.0;
+	m[12] = 0.0;
+	m[13] = 0.0;
+	m[14] = 0.0;
+	m[15] = 1.0;
+}
+
+static GLuint load_shader(GLenum shaderType, const char *src) {
+	GLint status = 0, len = 0;
+	GLuint shader;
+
+	if (!(shader = glCreateShader(shaderType)))
+		return 0;
+
+	glShaderSource(shader, 1, &src, NULL);
+	glCompileShader(shader);
+	glGetShaderiv(shader, GL_COMPILE_STATUS, &status);
+
+	if (status)
+		return shader;
+
+	glGetShaderiv(shader, GL_INFO_LOG_LENGTH, &len);
+	if (len) {
+		char *msg = malloc(len);
+		if (msg) {
+			glGetShaderInfoLog(shader, len, NULL, msg);
+			msg[len-1] = 0;
+			fprintf(stderr, "error compiling shader:\n%s\n", msg);
+			free(msg);
+		}
+	}
+	glDeleteShader(shader);
+	return 0;
+}
+
+GLuint load_program(const char *vert_src, const char *frag_src) {
+	GLuint vert, frag, prog;
+	GLint status = 0, len = 0;
+
+	if (!(vert = load_shader(GL_VERTEX_SHADER, vert_src)))
+		return 0;
+	if (!(frag = load_shader(GL_FRAGMENT_SHADER, frag_src)))
+		goto fail_frag;
+	if (!(prog = glCreateProgram()))
+		goto fail_prog;
+
+	glAttachShader(prog, vert);
+	glAttachShader(prog, frag);
+	glLinkProgram(prog);
+
+	glGetProgramiv(prog, GL_LINK_STATUS, &status);
+	if (status)
+		return prog;
+
+	glGetProgramiv(prog, GL_INFO_LOG_LENGTH, &len);
+	if (len) {
+		char *buf = (char*) malloc(len);
+		if (buf) {
+			glGetProgramInfoLog(prog, len, NULL, buf);
+			buf[len-1] = 0;
+			fprintf(stderr, "error linking program:\n%s\n", buf);
+			free(buf);
+		}
+	}
+	glDeleteProgram(prog);
+fail_prog:
+	glDeleteShader(frag);
+fail_frag:
+	glDeleteShader(vert);
+	return 0;
+}
+
+int select_config_for_window(EGLDisplay dpy, EGLint *attr,
+	unsigned format, EGLConfig *config) {
+	EGLint R,G,B,A,r,g,b,a;
+	EGLint i, n, max;
+	EGLConfig *cfg;
+
+	switch (format) {
+	case HAL_PIXEL_FORMAT_RGBA_8888:
+	case HAL_PIXEL_FORMAT_BGRA_8888:
+		R = G = B = A = 8;
+		break;
+	case HAL_PIXEL_FORMAT_RGB_565:
+		R = 5; G = 6; B = 5; A = 0;
+		break;
+	default:
+		fprintf(stderr, "unknown fb pixel format %d\n", format);
+		return -1;
+	}
+
+	if (eglGetConfigs(dpy, NULL, 0, &max) == EGL_FALSE) {
+		fprintf(stderr, "no EGL configurations available?!\n");
+		return -1;
+	}
+
+	cfg = (EGLConfig*) malloc(sizeof(EGLConfig) * max);
+	if (!cfg)
+		return -1;
+
+	if (eglChooseConfig(dpy, attr, cfg, max, &n) == EGL_FALSE) {
+		fprintf(stderr, "eglChooseConfig failed\n");
+		return -1;
+	}
+
+	for (i = 0; i < n; i++) {
+		EGLint r,g,b,a;
+		eglGetConfigAttrib(dpy, cfg[i], EGL_RED_SIZE,   &r);
+		eglGetConfigAttrib(dpy, cfg[i], EGL_GREEN_SIZE, &g);
+		eglGetConfigAttrib(dpy, cfg[i], EGL_BLUE_SIZE,  &b);
+		eglGetConfigAttrib(dpy, cfg[i], EGL_ALPHA_SIZE, &a);
+		if (r == R && g == G && b == B && a == A) {
+			*config = cfg[i];
+			free(cfg);
+			return 0;
+		}
+	}
+
+	fprintf(stderr, "cannot find matching config\n");
+	free(cfg);
+	return -1;
+}
+
+static struct CNativeWindow *_cnw = 0;
+
+int egl_create(EGLDisplay *_display, EGLSurface *_surface, int *_w, int *_h) {
+	EGLBoolean res;
+	EGLConfig config = { 0 };
+	EGLint context_attrs[] = { EGL_CONTEXT_CLIENT_VERSION, 2, EGL_NONE };
+	EGLint config_attrs[] = {
+		EGL_SURFACE_TYPE, EGL_WINDOW_BIT,
+		EGL_RENDERABLE_TYPE, EGL_OPENGL_ES2_BIT,
+		EGL_NONE };
+	EGLint major, minor;
+	EGLContext context;
+	EGLSurface surface;
+	EGLint w, h;
+	EGLDisplay display;
+	EGLNativeWindowType window;
+	unsigned width, height, format;
+	struct CNativeWindow *cnw;
+
+	display = eglGetDisplay(EGL_DEFAULT_DISPLAY);
+	if (display == EGL_NO_DISPLAY)
+		return -1;
+
+	if (!(res = eglInitialize(display, &major, &minor)))
+		return -1;
+
+	fprintf(stderr, "egl version: %d.%d\n", major, minor);
+
+	if ((cnw = cnw_create()) == 0)
+		return -1;
+
+	cnw_info(cnw, &width, &height, &format);
+	window = (EGLNativeWindowType) cnw;
+
+	if ((res = select_config_for_window(display, config_attrs, format, &config)))
+		goto fail;
+
+	surface = eglCreateWindowSurface(display, config, window, NULL);
+	if (surface == EGL_NO_SURFACE)
+		goto fail;
+
+	context = eglCreateContext(display, config, EGL_NO_CONTEXT, context_attrs);
+	if (context == EGL_NO_CONTEXT)
+		goto fail;
+
+	if (!(res = eglMakeCurrent(display, surface, surface, context)))
+		goto fail;
+
+	eglQuerySurface(display, surface, EGL_WIDTH, &w);
+	eglQuerySurface(display, surface, EGL_HEIGHT, &h);
+
+	fprintf(stderr, "window: %d x %d\n", w, h);
+
+	*_display = display;
+	*_surface = surface;
+	*_w = w;
+	*_h = h;
+
+	_cnw = cnw;
+	return 0;
+
+fail:
+	cnw_destroy(cnw);
+	return -1;
+}
+
+void egl_destroy(EGLDisplay display, EGLSurface surface) {
+	if (_cnw) {
+		eglDestroySurface(display, surface);
+		eglTerminate(display);
+		cnw_destroy(_cnw);
+		_cnw = 0;
+	}
+}
diff --git a/tests/hwc/util.h b/tests/hwc/util.h
new file mode 100644
index 0000000..a0d38ce
--- /dev/null
+++ b/tests/hwc/util.h
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2013 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef _GL_UTIL_H_
+#define _GL_UTIL_H_
+
+/* convenience */
+
+GLuint load_program(const char *vert_src, const char *frag_src);
+void matrix_init_ortho(GLfloat *m, float w, float h);
+
+/* context setup / teardown */
+
+int egl_create(EGLDisplay *_display, EGLSurface *_surface, int *_w, int *_h);
+void egl_destroy(EGLDisplay display, EGLSurface surface);
+
+/* internals needed by util.c */
+
+struct CNativeWindow;
+struct CNativeWindow *cnw_create(void);
+void cnw_destroy(struct CNativeWindow *win);
+void cnw_info(struct CNativeWindow *win,
+	unsigned *w, unsigned *h, unsigned *fmt);
+
+#endif