Initial NFC HAL for NCI controllers.
Bug: 7123942
Change-Id: Ic64aa6477f2eb65b489b3be5d49ad21ccce63e2d
diff --git a/include/hardware/nfc.h b/include/hardware/nfc.h
index 74b3cfb..31410fb 100644
--- a/include/hardware/nfc.h
+++ b/include/hardware/nfc.h
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2011 The Android Open Source Project
+ * Copyright (C) 2011, 2012 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
@@ -14,7 +14,6 @@
* limitations under the License.
*/
-
#ifndef ANDROID_NFC_HAL_INTERFACE_H
#define ANDROID_NFC_HAL_INTERFACE_H
@@ -27,11 +26,198 @@
__BEGIN_DECLS
-#define NFC_HARDWARE_MODULE_ID "nfc"
+
+/* NFC device HAL for NCI-based NFC controllers.
+ *
+ * This HAL allows NCI silicon vendors to make use
+ * of the core NCI stack in Android for their own silicon.
+ *
+ * The responibilities of the NCI HAL implementation
+ * are as follows:
+ *
+ * - Implement the transport to the NFC controller
+ * - Implement each of the HAL methods specified below as applicable to their silicon
+ * - Pass up received NCI messages from the controller to the stack
+ *
+ * A simplified timeline of NCI HAL method calls:
+ * 1) Core NCI stack calls open()
+ * 2) Core NCI stack executes CORE_RESET and CORE_INIT through calls to write()
+ * 3) Core NCI stack calls core_initialized() to allow HAL to do post-init configuration
+ * 4) Core NCI stack calls pre_discover() to allow HAL to prepare for RF discovery
+ * 5) Core NCI stack starts discovery through calls to write()
+ * 6) Core NCI stack stops discovery through calls to write() (e.g. screen turns off)
+ * 7) Core NCI stack calls pre_discover() to prepare for RF discovery (e.g. screen turned back on)
+ * 8) Core NCI stack starts discovery through calls to write()
+ * ...
+ * ...
+ * 9) Core NCI stack calls close()
+ */
+#define NFC_NCI_HARDWARE_MODULE_ID "nfc_nci"
+#define NFC_NCI_CONTROLLER "nci"
/*
+ * nfc_nci_module_t should contain module-specific parameters
+ */
+typedef struct nfc_nci_module_t {
+ struct hw_module_t common;
+} nfc_nci_module_t;
+
+/*
+ * HAL events that can be passed back to the stack
+ */
+typedef uint8_t nfc_event_t;
+
+enum {
+ HAL_NFC_OPEN_CPLT_EVT = 0x00,
+ HAL_NFC_CLOSE_CPLT_EVT = 0x01,
+ HAL_NFC_POST_INIT_CPLT_EVT = 0x02,
+ HAL_NFC_NCI_RX_EVT = 0x03,
+ HAL_NFC_PRE_DISCOVER_CPLT_EVT = 0x04,
+ HAL_NFC_REQUEST_CONTROL_EVT = 0x05,
+ HAL_NFC_RELEASE_CONTROL_EVT = 0x06,
+ HAL_NFC_ERROR_EVT = 0x07
+};
+
+/*
+ * Allowed status return values for each of the HAL methods
+ */
+typedef uint8_t nfc_status_t;
+
+enum {
+ HAL_NFC_STATUS_OK = 0x00,
+ HAL_NFC_STATUS_FAILED = 0x01,
+ HAL_NFC_STATUS_ERR_TRANSPORT = 0x02,
+ HAL_NFC_STATUS_ERR_CMD_TIMEOUT = 0x03,
+ HAL_NFC_STATUS_REFUSED = 0x04
+};
+
+/*
+ * nfc_rx_data
+ * Struct used to pass received NCI packets up to the stack
+ */
+typedef struct nfc_rx_data {
+ uint16_t len;
+ uint8_t *p_data;
+} nfc_rx_data_t;
+
+/*
+ */
+typedef union
+{
+ nfc_status_t status;
+ nfc_rx_data_t nci_rx;
+} nfc_event_data_t;
+
+/*
+ * The callback passed in from the NFC stack that the HAL
+ * can use to pass events back to the stack.
+ */
+typedef void (nfc_stack_callback_t) (nfc_event_t event, nfc_event_data_t* p_data);
+
+/* nfc_nci_device_t starts with a hw_device_t struct,
+ * followed by device-specific methods and members.
+ *
+ * All methods in the NCI HAL are asynchronous.
+ */
+typedef struct nfc_nci_device {
+ struct hw_device_t common;
+ /*
+ * (*open)() Opens the NFC controller device and performs initialization.
+ * This may include patch download and other vendor-specific initialization.
+ *
+ * If open completes successfully, the controller should be ready to perform
+ * NCI initialization - ie accept CORE_RESET and subsequent commands through
+ * the write() call.
+ *
+ * If open() returns 0, the NCI stack will wait for a HAL_NFC_OPEN_CPLT_EVT
+ * before continuing.
+ *
+ * If open() returns any other value, the NCI stack will stop.
+ *
+ */
+ int (*open)(const struct nfc_nci_device *p_dev, nfc_stack_callback_t *p_cback);
+
+ /*
+ * (*write)() Performs an NCI write.
+ *
+ * This method may queue writes and return immediately. The only
+ * requirement is that the writes are executed in order.
+ */
+ int (*write)(const struct nfc_nci_device *p_dev, uint16_t data_len, const uint8_t *p_data);
+
+ /*
+ * (*core_initialized)() is called after the CORE_INIT_RSP is received from the NFCC.
+ * At this time, the HAL can do any chip-specific configuration.
+ *
+ * If core_initialized() returns 0, the NCI stack will wait for a HAL_NFC_POST_INIT_CPLT_EVT
+ * before continuing.
+ *
+ * If core_initialized() returns any other value, the NCI stack will continue
+ * immediately.
+ */
+ int (*core_initialized)(const struct nfc_nci_device *p_dev, uint8_t* p_core_init_rsp_params);
+
+ /*
+ * (*pre_discover)() Is called every time before starting RF discovery.
+ * It is a good place to do vendor-specific configuration that must be
+ * performed every time RF discovery is about to be started.
+ *
+ * If pre_discover() returns 0, the NCI stack will wait for a HAL_NFC_PRE_DISCOVER_CPLT_EVT
+ * before continuing.
+ *
+ * If pre_discover() returns any other value, the NCI stack will start
+ * RF discovery immediately.
+ */
+ int (*pre_discover)(const struct nfc_nci_device *p_dev);
+
+ /*
+ * (*close)() Closed the NFC controller. Should free all resources.
+ */
+ int (*close)(const struct nfc_nci_device *p_dev);
+
+ /*
+ * (*control_granted)() Grant HAL the exclusive control to send NCI commands.
+ * Called in response to HAL_REQUEST_CONTROL_EVT.
+ * Must only be called when there are no NCI commands pending.
+ * HAL_RELEASE_CONTROL_EVT will notify when HAL no longer needs exclusive control.
+ */
+ int (*control_granted)(const struct nfc_nci_device *p_dev);
+
+ /*
+ * (*power_cycle)() Restart controller by power cyle;
+ * HAL_OPEN_CPLT_EVT will notify when operation is complete.
+ */
+ int (*power_cycle)(const struct nfc_nci_device *p_dev);
+} nfc_nci_device_t;
+
+/*
+ * Convenience methods that the NFC stack can use to open
+ * and close an NCI device
+ */
+static inline int nfc_nci_open(const struct hw_module_t* module,
+ nfc_nci_device_t** dev) {
+ return module->methods->open(module, NFC_NCI_CONTROLLER,
+ (struct hw_device_t**) dev);
+}
+
+static inline int nfc_nci_close(nfc_nci_device_t* dev) {
+ return dev->common.close(&dev->common);
+}
+/*
+ * End NFC NCI HAL
+ */
+
+/*
+ * This is a limited NFC HAL for NXP PN544-based devices.
+ * This HAL as Android is moving to
+ * an NCI-based NFC stack.
+ *
+ * All NCI-based NFC controllers should use the NFC-NCI
+ * HAL instead.
* Begin PN544 specific HAL
*/
+#define NFC_HARDWARE_MODULE_ID "nfc"
+
#define NFC_PN544_CONTROLLER "pn544"
typedef struct nfc_module_t {