diff --git a/include/hardware/activity_recognition.h b/include/hardware/activity_recognition.h
new file mode 100644
index 0000000..3d3c1bd
--- /dev/null
+++ b/include/hardware/activity_recognition.h
@@ -0,0 +1,186 @@
+/*
+ * Copyright (C) 2014 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ * Activity Recognition HAL. The goal is to provide low power, low latency, always-on activity
+ * recognition implemented in hardware (i.e. these activity recognition algorithms/classifers
+ * should NOT be run on the AP). By low power we mean that this may be activated 24/7 without
+ * impacting the battery drain speed (goal in order of 1mW including the power for sensors).
+ * This HAL does not specify the input sources that are used towards detecting these activities.
+ * It has one monitor interface which can be used to batch activities for always-on
+ * activity_recognition and if the latency is zero, the same interface can be used for low latency
+ * detection.
+ */
+
+#ifndef ANDROID_ACTIVITY_RECOGNITION_INTERFACE_H
+#define ANDROID_ACTIVITY_RECOGNITION_INTERFACE_H
+
+#include <hardware/hardware.h>
+
+__BEGIN_DECLS
+
+#define ACTIVITY_RECOGNITION_HEADER_VERSION   1
+#define ACTIVITY_RECOGNITION_API_VERSION_0_1  HARDWARE_DEVICE_API_VERSION_2(0, 1, ACTIVITY_RECOGNITION_HEADER_VERSION)
+
+#define ACTIVITY_RECOGNITION_HARDWARE_MODULE_ID "activity_recognition"
+#define ACTIVITY_RECOGNITION_HARDWARE_INTERFACE "activity_recognition_hw_if"
+
+/*
+ * Define constants for various activity types. Multiple activities may be active at the same time
+ * and sometimes none of these activities may be active.
+ */
+
+/* Reserved. get_supported_activities_list() should not return this activity. */
+#define DETECTED_ACTIVITY_RESERVED          (0)
+
+#define DETECTED_ACTIVITY_IN_VEHICLE        (1)
+
+#define DETECTED_ACTIVITY_ON_BICYCLE        (2)
+
+#define DETECTED_ACTIVITY_WALKING           (3)
+
+#define DETECTED_ACTIVITY_RUNNING           (4)
+
+#define DETECTED_ACTIVITY_STILL             (5)
+
+#define DETECTED_ACTIVITY_TILTING           (6)
+
+/* Values for activity_event.event_types. */
+enum {
+    /*
+     * A flush_complete event which indicates that a flush() has been successfully completed. This
+     * does not correspond to any activity/event. An event of this type should be added to the end
+     * of a batch FIFO and it indicates that all the events in the batch FIFO have been successfully
+     * reported to the framework. An event of this type should be generated only if flush() has been
+     * explicitly called and if the FIFO is empty at the time flush() is called it should trivially
+     * return a flush_complete_event to indicate that the FIFO is empty.
+     *
+     * A flush complete event should have the following parameters set.
+     * activity_event_t.event_type = ACTIVITY_EVENT_TYPE_FLUSH_COMPLETE
+     * activity_event_t.detected_activity = DETECTED_ACTIVITY_RESERVED
+     * activity_event_t.timestamp = 0
+     * activity_event_t.reserved = 0
+     * See (*flush)() for more details.
+     */
+    ACTIVITY_EVENT_TYPE_FLUSH_COMPLETE = 0,
+
+    /* Signifies entering an activity. */
+    ACTIVITY_EVENT_TYPE_ENTER = 1,
+
+    /* Signifies exiting an activity. */
+    ACTIVITY_EVENT_TYPE_EXIT  = 2
+};
+
+/*
+ * Each event is a separate activity with event_type indicating whether this activity has started
+ * or ended. Eg event: (event_type="enter", detected_activity="ON_FOOT", timestamp)
+ */
+typedef struct activity_event {
+    /* One of the ACTIVITY_EVENT_TYPE_* constants defined above. */
+    uint32_t event_type;
+
+    /* Detected Activity. One of DETECTED_ACTIVITY_TYPE_* constants defined above. */
+    int32_t detected_activity;
+
+    /* Time at which the transition/event has occurred in nanoseconds using elapsedRealTimeNano. */
+    int64_t timestamp;
+
+    /* Set to zero. */
+    int32_t reserved[4];
+} activity_event_t;
+
+typedef struct activity_recognition_module {
+    hw_module_t common;
+
+    /*
+     * List of all activities supported by this module. Each activity is represented as an integer.
+     * Each value in the list is one of the DETECTED_ACTIVITY_* constants defined above. Return
+     * value is the size of this list.
+     */
+    int (*get_supported_activities_list)(struct activity_recognition_module* module,
+            int** activity_list);
+} activity_recognition_module_t;
+
+struct activity_recognition_device;
+
+typedef struct activity_recognition_callback_procs {
+    // Callback for activity_data. This is guaranteed to not invoke any HAL methods.
+    // Memory allocated for the events can be reused after this method returns.
+    //    events - Array of activity_event_t s that are reported.
+    //    count  - size of the array.
+    void (*activity_callback)(const struct activity_recognition_device* dev,
+            const activity_event_t* events, int count);
+} activity_recognition_callback_procs_t;
+
+typedef struct activity_recognition_device {
+    hw_device_t common;
+
+    /*
+     * Sets the callback to invoke when there are events to report. This call overwrites the
+     * previously registered callback (if any).
+     */
+    void (*register_activity_callback)(const struct activity_recognition_device* dev,
+            const activity_recognition_callback_procs_t* callback);
+
+    /*
+     * Activates and deactivates monitoring of activity transitions. Activities need not be reported
+     * as soon as they are detected. The detected activities are stored in a FIFO and reported in
+     * batches when the "max_batch_report_latency" expires or when the batch FIFO is full. The
+     * implementation should allow the AP to go into suspend mode while the activities are detected
+     * and stored in the batch FIFO. Whenever events need to be reported (like when the FIFO is full
+     * or when the max_batch_report_latency has expired for an activity, event pair), it should
+     * wake_up the AP so that no events are lost. Activities are stored as transitions and they are
+     * allowed to overlap with each other.
+     * detected_activity - The specific activity that needs to be monitored.
+     * event_type    - Specific transition of the activity that needs to be monitored.
+     * enabled       - Enable/Disable detection of an (detected_activity, event_type) pair. Each
+     *                 pair can be activated or deactivated independently of the other. The HAL
+     *                 implementation needs to keep track of which pairs are currently active
+     *                 and needs to detect only those activities.
+     * max_batch_report_latency - a transition can be delayed by at most
+     *                            “max_batch_report_latency” nanoseconds.
+     * Return 0 on success, negative errno code otherwise.
+     */
+    int (*monitor_activity_event)(const struct activity_recognition_device* dev,
+            int32_t detected_activity, int32_t event_type, int64_t max_batch_report_latency_ns,
+            int32_t enabled);
+
+    /*
+     * Flush all the batch FIFOs. Report all the activities that were stored in the FIFO so far as
+     * if max_batch_report_latency had expired. This shouldn't change the latency in any way. Add
+     * a flush_complete_event to indicate the end of the FIFO after all events are delivered.
+     * See ACTIVITY_EVENT_TYPE_FLUSH_COMPLETE for more details.
+     * Return 0 on success, negative errno code otherwise.
+     */
+    int (*flush)(const struct activity_recognition_device* dev);
+
+    // Must be set to NULL.
+    void (*reserved_procs[4])(void);
+} activity_recognition_device_t;
+
+static inline int activity_recognition_open(const hw_module_t* module,
+        activity_recognition_device_t** device) {
+    return module->methods->open(module,
+            ACTIVITY_RECOGNITION_HARDWARE_INTERFACE, (hw_device_t**)device);
+}
+
+static inline int activity_recognition_close(activity_recognition_device_t* device) {
+    return device->common.close(&device->common);
+}
+
+__END_DECLS
+
+#endif // ANDROID_ACTIVITY_RECOGNITION_INTERFACE_H
diff --git a/include/hardware/audio.h b/include/hardware/audio.h
index 6ba2544..b53cbff 100644
--- a/include/hardware/audio.h
+++ b/include/hardware/audio.h
@@ -97,6 +97,9 @@
 /* Screen state */
 #define AUDIO_PARAMETER_KEY_SCREEN_STATE "screen_state"
 
+/* Bluetooth SCO wideband */
+#define AUDIO_PARAMETER_KEY_BT_SCO_WB "bt_wbs"
+
 /**
  *  audio stream parameters
  */
diff --git a/include/hardware/audio_alsaops.h b/include/hardware/audio_alsaops.h
new file mode 100644
index 0000000..0d266ff
--- /dev/null
+++ b/include/hardware/audio_alsaops.h
@@ -0,0 +1,102 @@
+/*
+ * Copyright (C) 2014 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/* This file contains shared utility functions to handle the tinyalsa
+ * implementation for Android internal audio, generally in the hardware layer.
+ * Some routines may log a fatal error on failure, as noted.
+ */
+
+#ifndef ANDROID_AUDIO_ALSAOPS_H
+#define ANDROID_AUDIO_ALSAOPS_H
+
+#include <cutils/log.h>
+#include <system/audio.h>
+#include <tinyalsa/asoundlib.h>
+
+__BEGIN_DECLS
+
+/* Converts audio_format to pcm_format.
+ * Parameters:
+ *  format  the audio_format_t to convert
+ *
+ * Logs a fatal error if format is not a valid convertible audio_format_t.
+ */
+static inline enum pcm_format pcm_format_from_audio_format(audio_format_t format)
+{
+    switch (format) {
+#ifdef HAVE_BIG_ENDIAN
+    case AUDIO_FORMAT_PCM_16_BIT:
+        return PCM_FORMAT_S16_BE;
+    case AUDIO_FORMAT_PCM_24_BIT_PACKED:
+        return PCM_FORMAT_S24_3BE;
+    case AUDIO_FORMAT_PCM_32_BIT:
+        return PCM_FORMAT_S32_BE;
+    case AUDIO_FORMAT_PCM_8_24_BIT:
+        return PCM_FORMAT_S24_BE;
+#else
+    case AUDIO_FORMAT_PCM_16_BIT:
+        return PCM_FORMAT_S16_LE;
+    case AUDIO_FORMAT_PCM_24_BIT_PACKED:
+        return PCM_FORMAT_S24_3LE;
+    case AUDIO_FORMAT_PCM_32_BIT:
+        return PCM_FORMAT_S32_LE;
+    case AUDIO_FORMAT_PCM_8_24_BIT:
+        return PCM_FORMAT_S24_LE;
+#endif
+    case AUDIO_FORMAT_PCM_FLOAT:  /* there is no equivalent for float */
+    default:
+        LOG_ALWAYS_FATAL("pcm_format_from_audio_format: invalid audio format %#x", format);
+        return 0;
+    }
+}
+
+/* Converts pcm_format to audio_format.
+ * Parameters:
+ *  format  the pcm_format to convert
+ *
+ * Logs a fatal error if format is not a valid convertible pcm_format.
+ */
+static inline audio_format_t audio_format_from_pcm_format(enum pcm_format format)
+{
+    switch (format) {
+#ifdef HAVE_BIG_ENDIAN
+    case PCM_FORMAT_S16_BE:
+        return AUDIO_FORMAT_PCM_16_BIT;
+    case PCM_FORMAT_S24_3BE:
+        return AUDIO_FORMAT_PCM_24_BIT_PACKED;
+    case PCM_FORMAT_S24_BE:
+        return AUDIO_FORMAT_PCM_8_24_BIT;
+    case PCM_FORMAT_S32_BE:
+        return AUDIO_FORMAT_PCM_32_BIT;
+#else
+    case PCM_FORMAT_S16_LE:
+        return AUDIO_FORMAT_PCM_16_BIT;
+    case PCM_FORMAT_S24_3LE:
+        return AUDIO_FORMAT_PCM_24_BIT_PACKED;
+    case PCM_FORMAT_S24_LE:
+        return AUDIO_FORMAT_PCM_8_24_BIT;
+    case PCM_FORMAT_S32_LE:
+        return AUDIO_FORMAT_PCM_32_BIT;
+#endif
+    default:
+        LOG_ALWAYS_FATAL("audio_format_from_pcm_format: invalid pcm format %#x", format);
+        return 0;
+    }
+}
+
+__END_DECLS
+
+#endif /* ANDROID_AUDIO_ALSAOPS_H */
diff --git a/include/hardware/audio_effect.h b/include/hardware/audio_effect.h
index b49d02d..ee48e4c 100644
--- a/include/hardware/audio_effect.h
+++ b/include/hardware/audio_effect.h
@@ -815,7 +815,7 @@
     uint32_t   samplingRate;    // sampling rate
     uint32_t   channels;        // channel mask (see audio_channel_mask_t in audio.h)
     buffer_provider_t bufferProvider;   // buffer provider
-    uint8_t    format;          // Audio format  (see see audio_format_t in audio.h)
+    uint8_t    format;          // Audio format (see audio_format_t in audio.h)
     uint8_t    accessMode;      // read/write or accumulate in buffer (effect_buffer_access_e)
     uint16_t   mask;            // indicates which of the above fields is valid
 } buffer_config_t;
diff --git a/include/hardware/audio_policy.h b/include/hardware/audio_policy.h
index 4e75e02..cbaa31d 100644
--- a/include/hardware/audio_policy.h
+++ b/include/hardware/audio_policy.h
@@ -332,10 +332,9 @@
                              audio_io_handle_t output,
                              int delay_ms);
 
-    /* reroute a given stream type to the specified output */
-    int (*set_stream_output)(void *service,
-                             audio_stream_type_t stream,
-                             audio_io_handle_t output);
+    /* invalidate a stream type, causing a reroute to an unspecified new output */
+    int (*invalidate_stream)(void *service,
+                             audio_stream_type_t stream);
 
     /* function enabling to send proprietary informations directly from audio
      * policy manager to audio hardware interface. */
diff --git a/include/hardware/bt_gatt_client.h b/include/hardware/bt_gatt_client.h
index 11b146d..baed4bd 100644
--- a/include/hardware/bt_gatt_client.h
+++ b/include/hardware/bt_gatt_client.h
@@ -159,6 +159,9 @@
 /** Callback invoked when the MTU for a given connection changes */
 typedef void (*configure_mtu_callback)(int conn_id, int status, int mtu);
 
+/** Callback invoked when a scan filter configuration command has completed */
+typedef void (*scan_filter_callback)(int action, int status);
+
 typedef struct {
     register_client_callback            register_client_cb;
     scan_result_callback                scan_result_cb;
@@ -179,6 +182,7 @@
     read_remote_rssi_callback           read_remote_rssi_cb;
     listen_callback                     listen_cb;
     configure_mtu_callback              configure_mtu_cb;
+    scan_filter_callback                scan_filter_cb;
 } btgatt_client_callbacks_t;
 
 /** Represents the standard BT-GATT client interface. */
@@ -195,7 +199,7 @@
 
     /** Create a connection to a remote LE or dual-mode device */
     bt_status_t (*connect)( int client_if, const bt_bdaddr_t *bd_addr,
-                         bool is_direct );
+                         bool is_direct, int transport );
 
     /** Disconnect a remote device or cancel a pending connection */
     bt_status_t (*disconnect)( int client_if, const bt_bdaddr_t *bd_addr,
@@ -276,6 +280,17 @@
     /** Request RSSI for a given remote device */
     bt_status_t (*read_remote_rssi)( int client_if, const bt_bdaddr_t *bd_addr);
 
+    /** Enable or disable scan filtering */
+    bt_status_t (*scan_filter_enable)( int enable );
+
+    /** Configure a scan filter condition  */
+    bt_status_t (*scan_filter_add)(int type, int company_id, int company_mask,
+                                   int len, const bt_uuid_t *p_uuid, const bt_uuid_t *p_uuid_mask,
+                                   const bt_bdaddr_t *bd_addr, char addr_type, const char* p_value);
+
+    /** Clear all scan filter conditions */
+    bt_status_t (*scan_filter_clear)();
+
     /** Determine the type of the remote device (LE, BR/EDR, Dual-mode) */
     int (*get_device_type)( const bt_bdaddr_t *bd_addr );
 
@@ -291,6 +306,7 @@
 
     /** Test mode interface */
     bt_status_t (*test_command)( int command, btgatt_test_params_t* params);
+
 } btgatt_client_interface_t;
 
 __END_DECLS
diff --git a/include/hardware/bt_gatt_server.h b/include/hardware/bt_gatt_server.h
index 1a5a400..32f8ef6 100644
--- a/include/hardware/bt_gatt_server.h
+++ b/include/hardware/bt_gatt_server.h
@@ -129,7 +129,8 @@
     bt_status_t (*unregister_server)(int server_if );
 
     /** Create a connection to a remote peripheral */
-    bt_status_t (*connect)(int server_if, const bt_bdaddr_t *bd_addr, bool is_direct );
+    bt_status_t (*connect)(int server_if, const bt_bdaddr_t *bd_addr,
+                            bool is_direct, int transport);
 
     /** Disconnect an established connection or cancel a pending one */
     bt_status_t (*disconnect)(int server_if, const bt_bdaddr_t *bd_addr,
@@ -168,6 +169,7 @@
     /** Send a response to a read/write operation */
     bt_status_t (*send_response)(int conn_id, int trans_id,
                                  int status, btgatt_response_t *response);
+
 } btgatt_server_interface_t;
 
 __END_DECLS
diff --git a/include/hardware/bt_gatt_types.h b/include/hardware/bt_gatt_types.h
index 0ac217e..e037ddc 100644
--- a/include/hardware/bt_gatt_types.h
+++ b/include/hardware/bt_gatt_types.h
@@ -43,6 +43,14 @@
     uint8_t             is_primary;
 } btgatt_srvc_id_t;
 
+/** Preferred physical Transport for GATT connection */
+typedef enum
+{
+    GATT_TRANSPORT_AUTO,
+    GATT_TRANSPORT_BREDR,
+    GATT_TRANSPORT_LE
+} btgatt_transport_t;
+
 __END_DECLS
 
 #endif /* ANDROID_INCLUDE_BT_GATT_TYPES_H */
diff --git a/include/hardware/bt_hf.h b/include/hardware/bt_hf.h
index 6135ac4..e015c28 100644
--- a/include/hardware/bt_hf.h
+++ b/include/hardware/bt_hf.h
@@ -79,65 +79,65 @@
 /** Callback for VR connection state change.
  *  state will have one of the values from BtHfVRState
  */
-typedef void (* bthf_vr_cmd_callback)(bthf_vr_state_t state);
+typedef void (* bthf_vr_cmd_callback)(bthf_vr_state_t state, bt_bdaddr_t *bd_addr);
 
 /** Callback for answer incoming call (ATA)
  */
-typedef void (* bthf_answer_call_cmd_callback)();
+typedef void (* bthf_answer_call_cmd_callback)(bt_bdaddr_t *bd_addr);
 
 /** Callback for disconnect call (AT+CHUP)
  */
-typedef void (* bthf_hangup_call_cmd_callback)();
+typedef void (* bthf_hangup_call_cmd_callback)(bt_bdaddr_t *bd_addr);
 
 /** Callback for disconnect call (AT+CHUP)
  *  type will denote Speaker/Mic gain (BtHfVolumeControl).
  */
-typedef void (* bthf_volume_cmd_callback)(bthf_volume_type_t type, int volume);
+typedef void (* bthf_volume_cmd_callback)(bthf_volume_type_t type, int volume, bt_bdaddr_t *bd_addr);
 
 /** Callback for dialing an outgoing call
  *  If number is NULL, redial
  */
-typedef void (* bthf_dial_call_cmd_callback)(char *number);
+typedef void (* bthf_dial_call_cmd_callback)(char *number, bt_bdaddr_t *bd_addr);
 
 /** Callback for sending DTMF tones
  *  tone contains the dtmf character to be sent
  */
-typedef void (* bthf_dtmf_cmd_callback)(char tone);
+typedef void (* bthf_dtmf_cmd_callback)(char tone, bt_bdaddr_t *bd_addr);
 
 /** Callback for enabling/disabling noise reduction/echo cancellation
  *  value will be 1 to enable, 0 to disable
  */
-typedef void (* bthf_nrec_cmd_callback)(bthf_nrec_t nrec);
+typedef void (* bthf_nrec_cmd_callback)(bthf_nrec_t nrec, bt_bdaddr_t *bd_addr);
 
 /** Callback for call hold handling (AT+CHLD)
  *  value will contain the call hold command (0, 1, 2, 3)
  */
-typedef void (* bthf_chld_cmd_callback)(bthf_chld_type_t chld);
+typedef void (* bthf_chld_cmd_callback)(bthf_chld_type_t chld, bt_bdaddr_t *bd_addr);
 
 /** Callback for CNUM (subscriber number)
  */
-typedef void (* bthf_cnum_cmd_callback)();
+typedef void (* bthf_cnum_cmd_callback)(bt_bdaddr_t *bd_addr);
 
 /** Callback for indicators (CIND)
  */
-typedef void (* bthf_cind_cmd_callback)();
+typedef void (* bthf_cind_cmd_callback)(bt_bdaddr_t *bd_addr);
 
 /** Callback for operator selection (COPS)
  */
-typedef void (* bthf_cops_cmd_callback)();
+typedef void (* bthf_cops_cmd_callback)(bt_bdaddr_t *bd_addr);
 
 /** Callback for call list (AT+CLCC)
  */
-typedef void (* bthf_clcc_cmd_callback) ();
+typedef void (* bthf_clcc_cmd_callback) (bt_bdaddr_t *bd_addr);
 
 /** Callback for unknown AT command recd from HF
  *  at_string will contain the unparsed AT string
  */
-typedef void (* bthf_unknown_at_cmd_callback)(char *at_string);
+typedef void (* bthf_unknown_at_cmd_callback)(char *at_string, bt_bdaddr_t *bd_addr);
 
 /** Callback for keypressed (HSP) event.
  */
-typedef void (* bthf_key_pressed_cmd_callback)();
+typedef void (* bthf_key_pressed_cmd_callback)(bt_bdaddr_t *bd_addr);
 
 /** BT-HF callback structure. */
 typedef struct {
@@ -213,7 +213,7 @@
     /**
      * Register the BtHf callbacks
      */
-    bt_status_t (*init)( bthf_callbacks_t* callbacks );
+    bt_status_t (*init)( bthf_callbacks_t* callbacks, int max_hf_clients);
 
     /** connect to headset */
     bt_status_t (*connect)( bt_bdaddr_t *bd_addr );
@@ -228,33 +228,33 @@
     bt_status_t (*disconnect_audio)( bt_bdaddr_t *bd_addr );
 
     /** start voice recognition */
-    bt_status_t (*start_voice_recognition)();
+    bt_status_t (*start_voice_recognition)( bt_bdaddr_t *bd_addr );
 
     /** stop voice recognition */
-    bt_status_t (*stop_voice_recognition)();
+    bt_status_t (*stop_voice_recognition)( bt_bdaddr_t *bd_addr );
 
     /** volume control */
-    bt_status_t (*volume_control) (bthf_volume_type_t type, int volume);
+    bt_status_t (*volume_control) (bthf_volume_type_t type, int volume, bt_bdaddr_t *bd_addr );
 
     /** Combined device status change notification */
     bt_status_t (*device_status_notification)(bthf_network_state_t ntk_state, bthf_service_type_t svc_type, int signal,
                            int batt_chg);
 
     /** Response for COPS command */
-    bt_status_t (*cops_response)(const char *cops);
+    bt_status_t (*cops_response)(const char *cops, bt_bdaddr_t *bd_addr );
 
     /** Response for CIND command */
     bt_status_t (*cind_response)(int svc, int num_active, int num_held, bthf_call_state_t call_setup_state,
-                                 int signal, int roam, int batt_chg);
+                                 int signal, int roam, int batt_chg, bt_bdaddr_t *bd_addr );
 
     /** Pre-formatted AT response, typically in response to unknown AT cmd */
-    bt_status_t (*formatted_at_response)(const char *rsp);
+    bt_status_t (*formatted_at_response)(const char *rsp, bt_bdaddr_t *bd_addr );
 
     /** ok/error response
      *  ERROR (0)
      *  OK    (1)
      */
-    bt_status_t (*at_response) (bthf_at_response_t response_code, int error_code);
+    bt_status_t (*at_response) (bthf_at_response_t response_code, int error_code, bt_bdaddr_t *bd_addr );
 
     /** response for CLCC command 
      *  Can be iteratively called for each call index
@@ -263,7 +263,7 @@
     bt_status_t (*clcc_response) (int index, bthf_call_direction_t dir,
                                 bthf_call_state_t state, bthf_call_mode_t mode,
                                 bthf_call_mpty_type_t mpty, const char *number,
-                                bthf_call_addrtype_t type);
+                                bthf_call_addrtype_t type, bt_bdaddr_t *bd_addr );
 
     /** notify of a call state change
      *  Each update notifies 
diff --git a/include/hardware/camera3.h b/include/hardware/camera3.h
index afc9d9f..6623dc7 100644
--- a/include/hardware/camera3.h
+++ b/include/hardware/camera3.h
@@ -21,19 +21,25 @@
 #include "camera_common.h"
 
 /**
- * Camera device HAL 3.1 [ CAMERA_DEVICE_API_VERSION_3_1 ]
+ * Camera device HAL 3.2 [ CAMERA_DEVICE_API_VERSION_3_2 ]
  *
  * EXPERIMENTAL.
  *
  * Supports the android.hardware.Camera API.
  *
  * Camera devices that support this version of the HAL must return
- * CAMERA_DEVICE_API_VERSION_3_1 in camera_device_t.common.version and in
+ * CAMERA_DEVICE_API_VERSION_3_2 in camera_device_t.common.version and in
  * camera_info_t.device_version (from camera_module_t.get_camera_info).
  *
- * Camera modules that may contain version 3.1 devices must implement at least
- * version 2.0 of the camera module interface (as defined by
- * camera_module_t.common.module_api_version).
+ * CAMERA_DEVICE_API_VERSION_3_2:
+ *    Camera modules that may contain version 3.2 devices must implement at
+ *    least version 2.2 of the camera module interface (as defined by
+ *    camera_module_t.common.module_api_version).
+ *
+ * <= CAMERA_DEVICE_API_VERSION_3_1:
+ *    Camera modules that may contain version 3.1 (or 3.0) devices must
+ *    implement at least version 2.0 of the camera module interface
+ *    (as defined by camera_module_t.common.module_api_version).
  *
  * See camera_common.h for more versioning details.
  *
@@ -44,6 +50,9 @@
  *   S4. 3A modes and state machines
  *   S5. Cropping
  *   S6. Error management
+ *   S7. Key Performance Indicator (KPI) glossary
+ *   S8. Sample Use Cases
+ *   S9. Notes on Controls and Metadata
  */
 
 /**
@@ -88,6 +97,27 @@
  *   - configure_streams passes consumer usage flags to the HAL.
  *
  *   - flush call to drop all in-flight requests/buffers as fast as possible.
+ *
+ * 3.2: Minor revision of expanded-capability HAL:
+ *
+ *   - Deprecates get_metadata_vendor_tag_ops.  Please use get_vendor_tag_ops
+ *     in camera_common.h instead.
+ *
+ *   - register_stream_buffers deprecated. All gralloc buffers provided
+ *     by framework to HAL in process_capture_request may be new at any time.
+ *
+ *   - add partial result support. process_capture_result may be called
+ *     multiple times with a subset of the available result before the full
+ *     result is available.
+ *
+ *   - add manual template to camera3_request_template. The applications may
+ *     use this template to control the capture settings directly.
+ *
+ *   - Rework the bidirectional and input stream specifications.
+ *
+ *   - change the input buffer return path. The buffer is returned in
+ *     process_capture_result instead of process_capture_request.
+ *
  */
 
 /**
@@ -108,12 +138,19 @@
  * 4. The framework calls camera3_device_t->ops->configure_streams() with a list
  *    of input/output streams to the HAL device.
  *
- * 5. The framework allocates gralloc buffers and calls
+ * 5. <= CAMERA_DEVICE_API_VERSION_3_1:
+ *
+ *    The framework allocates gralloc buffers and calls
  *    camera3_device_t->ops->register_stream_buffers() for at least one of the
  *    output streams listed in configure_streams. The same stream is registered
  *    only once.
  *
- * 5. The framework requests default settings for some number of use cases with
+ *    >= CAMERA_DEVICE_API_VERSION_3_2:
+ *
+ *    camera3_device_t->ops->register_stream_buffers() is not called and must
+ *    be NULL.
+ *
+ * 6. The framework requests default settings for some number of use cases with
  *    calls to camera3_device_t->ops->construct_default_request_settings(). This
  *    may occur any time after step 3.
  *
@@ -124,23 +161,64 @@
  *    camera3_device_t->ops->process_capture_request(). The HAL must block the
  *    return of this call until it is ready for the next request to be sent.
  *
- * 8. The framework continues to submit requests, and possibly call
- *    register_stream_buffers() for not-yet-registered streams, and call
+ *    >= CAMERA_DEVICE_API_VERSION_3_2:
+ *
+ *    The buffer_handle_t provided in the camera3_stream_buffer_t array
+ *    in the camera3_capture_request_t may be new and never-before-seen
+ *    by the HAL on any given new request.
+ *
+ * 8. The framework continues to submit requests, and call
  *    construct_default_request_settings to get default settings buffers for
  *    other use cases.
  *
+ *    <= CAMERA_DEVICE_API_VERSION_3_1:
+ *
+ *    The framework may call register_stream_buffers() at this time for
+ *    not-yet-registered streams.
+ *
  * 9. When the capture of a request begins (sensor starts exposing for the
  *    capture), the HAL calls camera3_callback_ops_t->notify() with the SHUTTER
  *    event, including the frame number and the timestamp for start of exposure.
+ *
+ *    <= CAMERA_DEVICE_API_VERSION_3_1:
+ *
  *    This notify call must be made before the first call to
  *    process_capture_result() for that frame number.
  *
+ *    >= CAMERA_DEVICE_API_VERSION_3_2:
+ *
+ *    The camera3_callback_ops_t->notify() call with the SHUTTER event should
+ *    be made as early as possible since the framework will be unable to
+ *    deliver gralloc buffers to the application layer (for that frame) until
+ *    it has a valid timestamp for the start of exposure.
+ *
+ *    Both partial metadata results and the gralloc buffers may be sent to the
+ *    framework at any time before or after the SHUTTER event.
+ *
  * 10. After some pipeline delay, the HAL begins to return completed captures to
  *    the framework with camera3_callback_ops_t->process_capture_result(). These
  *    are returned in the same order as the requests were submitted. Multiple
  *    requests can be in flight at once, depending on the pipeline depth of the
  *    camera HAL device.
  *
+ *    >= CAMERA_DEVICE_API_VERSION_3_2:
+ *
+ *    Once a buffer is returned by process_capture_result as part of the
+ *    camera3_stream_buffer_t array, and the fence specified by release_fence
+ *    has been signaled (this is a no-op for -1 fences), the ownership of that
+ *    buffer is considered to be transferred back to the framework. After that,
+ *    the HAL must no longer retain that particular buffer, and the
+ *    framework may clean up the memory for it immediately.
+ *
+ *    process_capture_result may be called multiple times for a single frame,
+ *    each time with a new disjoint piece of metadata and/or set of gralloc
+ *    buffers. The framework will accumulate these partial metadata results
+ *    into one result.
+ *
+ *    In particular, it is legal for a process_capture_result to be called
+ *    simultaneously for both a frame N and a frame N+1 as long as the
+ *    above rule holds for gralloc buffers (both input and output).
+ *
  * 11. After some time, the framework may stop submitting new requests, wait for
  *    the existing captures to complete (all buffers filled, all results
  *    returned), and then call configure_streams() again. This resets the camera
@@ -276,13 +354,10 @@
  *
  *   android.scaler.cropRegion (controls)
  *       [ignores (x,y), assumes center-zoom]
- *   android.scaler.availableFormats (static)
- *       [RAW not supported]
- *   android.scaler.availableJpegMinDurations (static)
- *   android.scaler.availableJpegSizes (static)
+ *   android.scaler.availableStreamConfigurations (static)
+ *   android.scaler.availableMinFrameDurations (static)
+ *   android.scaler.availableStallDurations (static)
  *   android.scaler.availableMaxDigitalZoom (static)
- *   android.scaler.availableProcessedMinDurations (static)
- *   android.scaler.availableProcessedSizes (static)
  *       [full resolution not supported]
  *   android.scaler.maxDigitalZoom (static)
  *   android.scaler.cropRegion (dynamic)
@@ -963,15 +1038,134 @@
  *   ERROR_BUFFER for each failed buffer.
  *
  * In each of these transient failure cases, the HAL must still call
- * process_capture_result, with valid output buffer_handle_t. If the result
- * metadata could not be produced, it should be NULL. If some buffers could not
- * be filled, their sync fences must be set to the error state.
+ * process_capture_result, with valid output and input (if an input buffer was
+ * submitted) buffer_handle_t. If the result metadata could not be produced, it
+ * should be NULL. If some buffers could not be filled, they must be returned with
+ * process_capture_result in the error state, their release fences must be set to
+ * the acquire fences passed by the framework, or -1 if they have been waited on by
+ * the HAL already.
  *
  * Invalid input arguments result in -EINVAL from the appropriate methods. In
  * that case, the framework must act as if that call had never been made.
  *
  */
 
+/**
+ * S7. Key Performance Indicator (KPI) glossary:
+ *
+ * This includes some critical definitions that are used by KPI metrics.
+ *
+ * Pipeline Latency:
+ *  For a given capture request, the duration from the framework calling
+ *  process_capture_request to the HAL sending capture result and all buffers
+ *  back by process_capture_result call. To make the Pipeline Latency measure
+ *  independent of frame rate, it is measured by frame count.
+ *
+ *  For example, when frame rate is 30 (fps), the frame duration (time interval
+ *  between adjacent frame capture time) is 33 (ms).
+ *  If it takes 5 frames for framework to get the result and buffers back for
+ *  a given request, then the Pipeline Latency is 5 (frames), instead of
+ *  5 x 33 = 165 (ms).
+ *
+ *  The Pipeline Latency is determined by android.request.pipelineDepth and
+ *  android.request.pipelineMaxDepth, see their definitions for more details.
+ *
+ */
+
+/**
+ * S8. Sample Use Cases:
+ *
+ * This includes some typical use case examples the camera HAL may support.
+ *
+ * S8.1 Zero Shutter Lag (ZSL) with CAMERA3_STREAM_INPUT stream.
+ *
+ *   When Zero Shutter Lag (ZSL) is supported by the camera device, the INPUT stream
+ *   can be used for application/framework implemented ZSL use case. This kind of stream
+ *   will be used by the framework as follows:
+ *
+ *   1. Framework configures an opaque raw format output stream that is used to
+ *      produce the ZSL output buffers. The stream pixel format will be
+ *      HAL_PIXEL_FORMAT_RAW_OPAQUE.
+ *
+ *   2. Framework configures an opaque raw format input stream that is used to
+ *      send the reprocess ZSL buffers to the HAL. The stream pixel format will
+ *      also be HAL_PIXEL_FORMAT_RAW_OPAQUE.
+ *
+ *   3. Framework configures a YUV/JPEG output stream that is used to receive the
+ *      reprocessed data. The stream pixel format will be YCbCr_420/HAL_PIXEL_FORMAT_BLOB.
+ *
+ *   4. Framework picks a ZSL buffer from the output stream when a ZSL capture is
+ *      issued by the application, and sends the data back as an input buffer in a
+ *      reprocessing request, then sends to the HAL for reprocessing.
+ *
+ *   5. The HAL sends back the output JPEG result to framework.
+ *
+ *   The HAL can select the actual raw buffer format and configure the ISP pipeline
+ *   appropriately based on the HAL_PIXEL_FORMAT_RAW_OPAQUE format. See this format
+ *   definition for more details.
+ *
+ * S8.2 Zero Shutter Lag (ZSL) with CAMERA3_STREAM_BIDIRECTIONAL stream.
+ *
+ *   For this use case, the bidirectional stream will be used by the framework as follows:
+ *
+ *   1. The framework includes a buffer from this stream as output buffer in a
+ *      request as normal.
+ *
+ *   2. Once the HAL device returns a filled output buffer to the framework,
+ *      the framework may do one of two things with the filled buffer:
+ *
+ *   2. a. The framework uses the filled data, and returns the now-used buffer
+ *         to the stream queue for reuse. This behavior exactly matches the
+ *         OUTPUT type of stream.
+ *
+ *   2. b. The framework wants to reprocess the filled data, and uses the
+ *         buffer as an input buffer for a request. Once the HAL device has
+ *         used the reprocessing buffer, it then returns it to the
+ *         framework. The framework then returns the now-used buffer to the
+ *         stream queue for reuse.
+ *
+ *   3. The HAL device will be given the buffer again as an output buffer for
+ *        a request at some future point.
+ *
+ *   For ZSL use case, the pixel format for bidirectional stream will be
+ *   HAL_PIXEL_FORMAT_RAW_OPAQUE if it is listed in
+ *   android.scaler.availableInputOutputFormatsMap.  A configuration stream list
+ *   that has BIDIRECTIONAL stream used as input, will usually also have a
+ *   distinct OUTPUT stream to get the reprocessing data. For example, for the
+ *   ZSL use case, the stream list might be configured with the following:
+ *
+ *     - A HAL_PIXEL_FORMAT_RAW_OPAQUE bidirectional stream is used
+ *       as input.
+ *     - And a HAL_PIXEL_FORMAT_BLOB (JPEG) output stream.
+ *
+ */
+
+/**
+ *   S9. Notes on Controls and Metadata
+ *
+ *   This section contains notes about the interpretation and usage of various metadata tags.
+ *
+ *   S9.1 HIGH_QUALITY and FAST modes.
+ *
+ *   Many camera post-processing blocks may be listed as having HIGH_QUALITY,
+ *   FAST, and OFF operating modes. These blocks will typically also have an
+ *   'available modes' tag representing which of these operating modes are
+ *   available on a given device. The general policy regarding implementing
+ *   these modes is as follows:
+ *
+ *   1. Operating mode controls of hardware blocks that cannot be disabled
+ *      must not list OFF in their corresponding 'available modes' tags.
+ *
+ *   2. OFF will always be included in their corresponding 'available modes'
+ *      tag if it is possible to disable that hardware block.
+ *
+ *   3. FAST must always be included in the 'available modes' tags for all
+ *      post-processing blocks supported on the device.  If a post-processing
+ *      block also has a slower and higher quality operating mode that does
+ *      not meet the framerate requirements for FAST mode, HIGH_QUALITY should
+ *      be included in the 'available modes' tag to represent this operating
+ *      mode.
+ */
 __BEGIN_DECLS
 
 struct camera3_device;
@@ -1006,6 +1200,21 @@
      * for reading buffers from this stream and sending them through the camera
      * processing pipeline, as if the buffer was a newly captured image from the
      * imager.
+     *
+     * The pixel format for input stream can be any format reported by
+     * android.scaler.availableInputOutputFormatsMap. The pixel format of the
+     * output stream that is used to produce the reprocessing data may be any
+     * format reported by android.scaler.availableStreamConfigurations. The
+     * supported input/output stream combinations depends the camera device
+     * capabilities, see android.scaler.availableInputOutputFormatsMap for
+     * stream map details.
+     *
+     * This kind of stream is generally used to reprocess data into higher
+     * quality images (that otherwise would cause a frame rate performance
+     * loss), or to do off-line reprocessing.
+     *
+     * A typical use case is Zero Shutter Lag (ZSL), see S8.1 for more details.
+     *
      */
     CAMERA3_STREAM_INPUT = 1,
 
@@ -1014,29 +1223,9 @@
      * used as an output stream, but occasionally one already-filled buffer may
      * be sent back to the HAL device for reprocessing.
      *
-     * This kind of stream is meant generally for zero-shutter-lag features,
-     * where copying the captured image from the output buffer to the
-     * reprocessing input buffer would be expensive. The stream will be used by
-     * the framework as follows:
-     *
-     * 1. The framework includes a buffer from this stream as output buffer in a
-     *    request as normal.
-     *
-     * 2. Once the HAL device returns a filled output buffer to the framework,
-     *    the framework may do one of two things with the filled buffer:
-     *
-     * 2. a. The framework uses the filled data, and returns the now-used buffer
-     *       to the stream queue for reuse. This behavior exactly matches the
-     *       OUTPUT type of stream.
-     *
-     * 2. b. The framework wants to reprocess the filled data, and uses the
-     *       buffer as an input buffer for a request. Once the HAL device has
-     *       used the reprocessing buffer, it then returns it to the
-     *       framework. The framework then returns the now-used buffer to the
-     *       stream queue for reuse.
-     *
-     * 3. The HAL device will be given the buffer again as an output buffer for
-     *    a request at some future point.
+     * This kind of stream is meant generally for Zero Shutter Lag (ZSL)
+     * features, where copying the captured image from the output buffer to the
+     * reprocessing input buffer would be expensive. See S8.2 for more details.
      *
      * Note that the HAL will always be reprocessing data it produced.
      *
@@ -1105,9 +1294,17 @@
      * gralloc module will select a format based on the usage flags provided by
      * the camera device and the other endpoint of the stream.
      *
+     * <= CAMERA_DEVICE_API_VERSION_3_1:
+     *
      * The camera HAL device must inspect the buffers handed to it in the
      * subsequent register_stream_buffers() call to obtain the
      * implementation-specific format details, if necessary.
+     *
+     * >= CAMERA_DEVICE_API_VERSION_3_2:
+     *
+     * register_stream_buffers() won't be called by the framework, so the HAL
+     * should configure the ISP and sensor pipeline based purely on the sizes,
+     * usage flags, and formats for the configured streams.
      */
     int format;
 
@@ -1257,6 +1454,14 @@
      *
      * For input buffers, the HAL must not change the acquire_fence field during
      * the process_capture_request() call.
+     *
+     * >= CAMERA_DEVICE_API_VERSION_3_2:
+     *
+     * When the HAL returns an input buffer to the framework with
+     * process_capture_result(), the acquire_fence must be set to -1. If the HAL
+     * never waits on input buffer acquire fence due to an error, the sync
+     * fences should be handled similarly to the way they are handled for output
+     * buffers.
      */
      int acquire_fence;
 
@@ -1265,10 +1470,25 @@
      * returning buffers to the framework, or write -1 to indicate that no
      * waiting is required for this buffer.
      *
-     * For the input buffer, the release fence must be set by the
-     * process_capture_request() call. For the output buffers, the fences must
-     * be set in the output_buffers array passed to process_capture_result().
+     * For the output buffers, the fences must be set in the output_buffers
+     * array passed to process_capture_result().
      *
+     * <= CAMERA_DEVICE_API_VERSION_3_1:
+     *
+     * For the input buffer, the release fence must be set by the
+     * process_capture_request() call.
+     *
+     * >= CAMERA_DEVICE_API_VERSION_3_2:
+     *
+     * For the input buffer, the fences must be set in the input_buffer
+     * passed to process_capture_result().
+     *
+     * After signaling the release_fence for this buffer, the HAL
+     * should not make any further attempts to access this buffer as the
+     * ownership has been fully transferred back to the framework.
+     *
+     * If a fence of -1 was specified then the ownership of this buffer
+     * is transferred back immediately upon the call of process_capture_result.
      */
     int release_fence;
 
@@ -1280,6 +1500,12 @@
  * The complete set of gralloc buffers for a stream. This structure is given to
  * register_stream_buffers() to allow the camera HAL device to register/map/etc
  * newly allocated stream buffers.
+ *
+ * >= CAMERA_DEVICE_API_VERSION_3_2:
+ *
+ * Deprecated (and not used). In particular,
+ * register_stream_buffers is also deprecated and will never be invoked.
+ *
  */
 typedef struct camera3_stream_buffer_set {
     /**
@@ -1309,17 +1535,18 @@
  * Transport header for compressed JPEG buffers in output streams.
  *
  * To capture JPEG images, a stream is created using the pixel format
- * HAL_PIXEL_FORMAT_BLOB, and the static metadata field android.jpeg.maxSize is
- * used as the buffer size. Since compressed JPEG images are of variable size,
- * the HAL needs to include the final size of the compressed image using this
- * structure inside the output stream buffer. The JPEG blob ID field must be set
- * to CAMERA3_JPEG_BLOB_ID.
+ * HAL_PIXEL_FORMAT_BLOB. The buffer size for the stream is calculated by the
+ * framework, based on the static metadata field android.jpeg.maxSize. Since
+ * compressed JPEG images are of variable size, the HAL needs to include the
+ * final size of the compressed image using this structure inside the output
+ * stream buffer. The JPEG blob ID field must be set to CAMERA3_JPEG_BLOB_ID.
  *
- * Transport header should be at the end of the JPEG output stream buffer.  That
- * means the jpeg_blob_id must start at byte[android.jpeg.maxSize -
- * sizeof(camera3_jpeg_blob)].  Any HAL using this transport header must
- * account for it in android.jpeg.maxSize.  The JPEG data itself starts at
- * the beginning of the buffer and should be jpeg_size bytes long.
+ * Transport header should be at the end of the JPEG output stream buffer. That
+ * means the jpeg_blob_id must start at byte[buffer_size -
+ * sizeof(camera3_jpeg_blob)], where the buffer_size is the size of gralloc buffer.
+ * Any HAL using this transport header must account for it in android.jpeg.maxSize
+ * The JPEG data itself starts at the beginning of the buffer and should be
+ * jpeg_size bytes long.
  */
 typedef struct camera3_jpeg_blob {
     uint16_t jpeg_blob_id;
@@ -1534,6 +1761,16 @@
      */
     CAMERA3_TEMPLATE_ZERO_SHUTTER_LAG = 5,
 
+    /**
+     * A basic template for direct application control of capture
+     * parameters. All automatic control is disabled (auto-exposure, auto-white
+     * balance, auto-focus), and post-processing parameters are set to preview
+     * quality. The manual capture parameters (exposure, sensitivity, etc.)
+     * are set to reasonable defaults, but should be overridden by the
+     * application depending on the intended use case.
+     */
+    CAMERA3_TEMPLATE_MANUAL = 6,
+
     /* Total number of templates */
     CAMERA3_TEMPLATE_COUNT,
 
@@ -1592,8 +1829,15 @@
      * The HAL is required to wait on the acquire sync fence of the input buffer
      * before accessing it.
      *
+     * <= CAMERA_DEVICE_API_VERSION_3_1:
+     *
      * Any input buffer included here will have been registered with the HAL
      * through register_stream_buffers() before its inclusion in a request.
+     *
+     * >= CAMERA_DEVICE_API_VERSION_3_2:
+     *
+     * The buffers will not have been pre-registered with the HAL.
+     * Subsequent requests may reuse buffers, or provide entirely new buffers.
      */
     camera3_stream_buffer_t *input_buffer;
 
@@ -1606,13 +1850,21 @@
     /**
      * An array of num_output_buffers stream buffers, to be filled with image
      * data from this capture/reprocess. The HAL must wait on the acquire fences
-     * of each stream buffer before writing to them. All the buffers included
-     * here will have been registered with the HAL through
-     * register_stream_buffers() before their inclusion in a request.
+     * of each stream buffer before writing to them.
      *
      * The HAL takes ownership of the actual buffer_handle_t entries in
      * output_buffers; the framework does not access them until they are
      * returned in a camera3_capture_result_t.
+     *
+     * <= CAMERA_DEVICE_API_VERSION_3_1:
+     *
+     * All the buffers included  here will have been registered with the HAL
+     * through register_stream_buffers() before their inclusion in a request.
+     *
+     * >= CAMERA_DEVICE_API_VERSION_3_2:
+     *
+     * Any or all of the buffers included here may be brand new in this
+     * request (having never before seen by the HAL).
      */
     const camera3_stream_buffer_t *output_buffers;
 
@@ -1625,7 +1877,9 @@
  * sent to the framework asynchronously with process_capture_result(), in
  * response to a single capture request sent to the HAL with
  * process_capture_request(). Multiple process_capture_result() calls may be
- * performed by the HAL for each request. Each call, all with the same frame
+ * performed by the HAL for each request.
+ *
+ * Each call, all with the same frame
  * number, may contain some subset of the output buffers, and/or the result
  * metadata. The metadata may only be provided once for a given frame number;
  * all other calls must set the result metadata to NULL.
@@ -1635,6 +1889,29 @@
  * output buffer may come with a release sync fence that the framework will wait
  * on before reading, in case the buffer has not yet been filled by the HAL.
  *
+ * >= CAMERA_DEVICE_API_VERSION_3_2:
+ *
+ * The metadata may be provided multiple times for a single frame number. The
+ * framework will accumulate together the final result set by combining each
+ * partial result together into the total result set.
+ *
+ * If an input buffer is given in a request, the HAL must return it in one of
+ * the process_capture_result calls, and the call may be to just return the input
+ * buffer, without metadata and output buffers; the sync fences must be handled
+ * the same way they are done for output buffers.
+ *
+ *
+ * Performance considerations:
+ *
+ * Applications will also receive these partial results immediately, so sending
+ * partial results is a highly recommended performance optimization to avoid
+ * the total pipeline latency before sending the results for what is known very
+ * early on in the pipeline.
+ *
+ * A typical use case might be calculating the AF state halfway through the
+ * pipeline; by sending the state back to the framework immediately, we get a
+ * 50% performance increase and perceived responsiveness of the auto-focus.
+ *
  */
 typedef struct camera3_capture_result {
     /**
@@ -1657,6 +1934,18 @@
      *
      * If there was an error producing the result metadata, result must be an
      * empty metadata buffer, and notify() must be called with ERROR_RESULT.
+     *
+     * >= CAMERA_DEVICE_API_VERSION_3_2:
+     *
+     * Multiple calls to process_capture_result() with a given frame_number
+     * may include the result metadata.
+     *
+     * Partial metadata submitted should not include any metadata key returned
+     * in a previous partial result for a given frame. Each new partial result
+     * for that frame must also set a distinct partial_result value.
+     *
+     * If notify has been called with ERROR_RESULT, all further partial
+     * results for that frame are ignored by the framework.
      */
     const camera_metadata_t *result;
 
@@ -1690,9 +1979,71 @@
      * num_output_buffers is zero, this may be NULL. In that case, at least one
      * more process_capture_result call must be made by the HAL to provide the
      * output buffers.
+     *
+     * When process_capture_result is called with a new buffer for a frame,
+     * all previous frames' buffers for that corresponding stream must have been
+     * already delivered (the fences need not have yet been signaled).
+     *
+     * >= CAMERA_DEVICE_API_VERSION_3_2:
+     *
+     * Gralloc buffers for a frame may be sent to framework before the
+     * corresponding SHUTTER-notify.
+     *
+     * Performance considerations:
+     *
+     * Buffers delivered to the framework will not be dispatched to the
+     * application layer until a start of exposure timestamp has been received
+     * via a SHUTTER notify() call. It is highly recommended to
+     * dispatch that call as early as possible.
      */
      const camera3_stream_buffer_t *output_buffers;
 
+     /**
+      * >= CAMERA_DEVICE_API_VERSION_3_2:
+      *
+      * The handle for the input stream buffer for this capture. It may not
+      * yet be consumed at the time the HAL calls process_capture_result(); the
+      * framework will wait on the release sync fences provided by the HAL before
+      * reusing the buffer.
+      *
+      * The HAL should handle the sync fences the same way they are done for
+      * output_buffers.
+      *
+      * Only one input buffer is allowed to be sent per request. Similarly to
+      * output buffers, the ordering of returned input buffers must be
+      * maintained by the HAL.
+      *
+      * Performance considerations:
+      *
+      * The input buffer should be returned as early as possible. If the HAL
+      * supports sync fences, it can call process_capture_result to hand it back
+      * with sync fences being set appropriately. If the sync fences are not
+      * supported, the buffer can only be returned when it is consumed, which
+      * may take long time; the HAL may choose to copy this input buffer to make
+      * the buffer return sooner.
+      */
+      const camera3_stream_buffer_t *input_buffer;
+
+     /**
+      * >= CAMERA_DEVICE_API_VERSION_3_2:
+      *
+      * In order to take advantage of partial results, the HAL must set the
+      * static metadata android.request.partialResultCount to the number of
+      * partial results it will send for each frame.
+      *
+      * Each new capture result with a partial result must set
+      * this field (partial_result) to a distinct inclusive value between
+      * 1 and android.request.partialResultCount.
+      *
+      * HALs not wishing to take advantage of this feature must not
+      * set an android.request.partialResultCount or partial_result to a value
+      * other than 1.
+      *
+      * This value must be set to 0 when a capture result contains buffers only
+      * and no metadata.
+      */
+     uint32_t partial_result;
+
 } camera3_capture_result_t;
 
 /**********************************************************************
@@ -1768,6 +2119,13 @@
      * message. In this case, individual ERROR_RESULT/ERROR_BUFFER messages
      * should not be sent.
      *
+     * Performance requirements:
+     *
+     * This is a non-blocking call. The framework will return this call in 5ms.
+     *
+     * The pipeline latency (see S7 for definition) should be less than or equal to
+     * 4 frame intervals, and must be less than or equal to 8 frame intervals.
+     *
      */
     void (*process_capture_result)(const struct camera3_callback_ops *,
             const camera3_capture_result_t *result);
@@ -1781,11 +2139,25 @@
      * with the HAL, and the msg only needs to be valid for the duration of this
      * call.
      *
+     * Multiple threads may call notify() simultaneously.
+     *
+     * <= CAMERA_DEVICE_API_VERSION_3_1:
+     *
      * The notification for the start of exposure for a given request must be
      * sent by the HAL before the first call to process_capture_result() for
      * that request is made.
      *
-     * Multiple threads may call notify() simultaneously.
+     * >= CAMERA_DEVICE_API_VERSION_3_2:
+     *
+     * Buffers delivered to the framework will not be dispatched to the
+     * application layer until a start of exposure timestamp has been received
+     * via a SHUTTER notify() call. It is highly recommended to
+     * dispatch this call as early as possible.
+     *
+     * ------------------------------------------------------------------------
+     * Performance requirements:
+     *
+     * This is a non-blocking call. The framework will return this call in 5ms.
      */
     void (*notify)(const struct camera3_callback_ops *,
             const camera3_notify_msg_t *msg);
@@ -1806,6 +2178,11 @@
      * the HAL. Will be called once after a successful open() call, before any
      * other functions are called on the camera3_device_ops structure.
      *
+     * Performance requirements:
+     *
+     * This should be a non-blocking call. The HAL should return from this call
+     * in 5ms, and must return from this call in 10ms.
+     *
      * Return values:
      *
      *  0:     On successful initialization
@@ -1823,6 +2200,8 @@
     /**
      * configure_streams:
      *
+     * CAMERA_DEVICE_API_VERSION_3_0 only:
+     *
      * Reset the HAL camera device processing pipeline and set up new input and
      * output streams. This call replaces any existing stream configuration with
      * the streams defined in the stream_list. This method will be called at
@@ -1835,16 +2214,19 @@
      * The stream_list may contain streams that are also in the currently-active
      * set of streams (from the previous call to configure_stream()). These
      * streams will already have valid values for usage, max_buffers, and the
-     * private pointer. If such a stream has already had its buffers registered,
+     * private pointer.
+     *
+     * If such a stream has already had its buffers registered,
      * register_stream_buffers() will not be called again for the stream, and
      * buffers from the stream can be immediately included in input requests.
      *
      * If the HAL needs to change the stream configuration for an existing
      * stream due to the new configuration, it may rewrite the values of usage
-     * and/or max_buffers during the configure call. The framework will detect
-     * such a change, and will then reallocate the stream buffers, and call
-     * register_stream_buffers() again before using buffers from that stream in
-     * a request.
+     * and/or max_buffers during the configure call.
+     *
+     * The framework will detect such a change, and will then reallocate the
+     * stream buffers, and call register_stream_buffers() again before using
+     * buffers from that stream in a request.
      *
      * If a currently-active stream is not included in stream_list, the HAL may
      * safely remove any references to that stream. It will not be reused in a
@@ -1873,6 +2255,115 @@
      * of (for example) a preview stream, with allocation for other streams
      * happening later or concurrently.
      *
+     * ------------------------------------------------------------------------
+     * CAMERA_DEVICE_API_VERSION_3_1 only:
+     *
+     * Reset the HAL camera device processing pipeline and set up new input and
+     * output streams. This call replaces any existing stream configuration with
+     * the streams defined in the stream_list. This method will be called at
+     * least once after initialize() before a request is submitted with
+     * process_capture_request().
+     *
+     * The stream_list must contain at least one output-capable stream, and may
+     * not contain more than one input-capable stream.
+     *
+     * The stream_list may contain streams that are also in the currently-active
+     * set of streams (from the previous call to configure_stream()). These
+     * streams will already have valid values for usage, max_buffers, and the
+     * private pointer.
+     *
+     * If such a stream has already had its buffers registered,
+     * register_stream_buffers() will not be called again for the stream, and
+     * buffers from the stream can be immediately included in input requests.
+     *
+     * If the HAL needs to change the stream configuration for an existing
+     * stream due to the new configuration, it may rewrite the values of usage
+     * and/or max_buffers during the configure call.
+     *
+     * The framework will detect such a change, and will then reallocate the
+     * stream buffers, and call register_stream_buffers() again before using
+     * buffers from that stream in a request.
+     *
+     * If a currently-active stream is not included in stream_list, the HAL may
+     * safely remove any references to that stream. It will not be reused in a
+     * later configure() call by the framework, and all the gralloc buffers for
+     * it will be freed after the configure_streams() call returns.
+     *
+     * The stream_list structure is owned by the framework, and may not be
+     * accessed once this call completes. The address of an individual
+     * camera3_stream_t structure will remain valid for access by the HAL until
+     * the end of the first configure_stream() call which no longer includes
+     * that camera3_stream_t in the stream_list argument. The HAL may not change
+     * values in the stream structure outside of the private pointer, except for
+     * the usage and max_buffers members during the configure_streams() call
+     * itself.
+     *
+     * If the stream is new, max_buffer, and private pointer fields of the
+     * stream structure will all be set to 0. The usage will be set to the
+     * consumer usage flags. The HAL device must set these fields before the
+     * configure_streams() call returns. These fields are then used by the
+     * framework and the platform gralloc module to allocate the gralloc
+     * buffers for each stream.
+     *
+     * Before such a new stream can have its buffers included in a capture
+     * request, the framework will call register_stream_buffers() with that
+     * stream. However, the framework is not required to register buffers for
+     * _all_ streams before submitting a request. This allows for quick startup
+     * of (for example) a preview stream, with allocation for other streams
+     * happening later or concurrently.
+     *
+     * ------------------------------------------------------------------------
+     * >= CAMERA_DEVICE_API_VERSION_3_2:
+     *
+     * Reset the HAL camera device processing pipeline and set up new input and
+     * output streams. This call replaces any existing stream configuration with
+     * the streams defined in the stream_list. This method will be called at
+     * least once after initialize() before a request is submitted with
+     * process_capture_request().
+     *
+     * The stream_list must contain at least one output-capable stream, and may
+     * not contain more than one input-capable stream.
+     *
+     * The stream_list may contain streams that are also in the currently-active
+     * set of streams (from the previous call to configure_stream()). These
+     * streams will already have valid values for usage, max_buffers, and the
+     * private pointer.
+     *
+     * If the HAL needs to change the stream configuration for an existing
+     * stream due to the new configuration, it may rewrite the values of usage
+     * and/or max_buffers during the configure call.
+     *
+     * The framework will detect such a change, and may then reallocate the
+     * stream buffers before using buffers from that stream in a request.
+     *
+     * If a currently-active stream is not included in stream_list, the HAL may
+     * safely remove any references to that stream. It will not be reused in a
+     * later configure() call by the framework, and all the gralloc buffers for
+     * it will be freed after the configure_streams() call returns.
+     *
+     * The stream_list structure is owned by the framework, and may not be
+     * accessed once this call completes. The address of an individual
+     * camera3_stream_t structure will remain valid for access by the HAL until
+     * the end of the first configure_stream() call which no longer includes
+     * that camera3_stream_t in the stream_list argument. The HAL may not change
+     * values in the stream structure outside of the private pointer, except for
+     * the usage and max_buffers members during the configure_streams() call
+     * itself.
+     *
+     * If the stream is new, max_buffer, and private pointer fields of the
+     * stream structure will all be set to 0. The usage will be set to the
+     * consumer usage flags. The HAL device must set these fields before the
+     * configure_streams() call returns. These fields are then used by the
+     * framework and the platform gralloc module to allocate the gralloc
+     * buffers for each stream.
+     *
+     * Newly allocated buffers may be included in a capture request at any time
+     * by the framework. Once a gralloc buffer is returned to the framework
+     * with process_capture_result (and its respective release_fence has been
+     * signaled) the framework may free or reuse it at any time.
+     *
+     * ------------------------------------------------------------------------
+     *
      * Preconditions:
      *
      * The framework will only call this method when no captures are being
@@ -1888,7 +2379,7 @@
      * frame rate given the sizes and formats of the output streams, as
      * documented in the camera device's static metadata.
      *
-     * Performance expectations:
+     * Performance requirements:
      *
      * This call is expected to be heavyweight and possibly take several hundred
      * milliseconds to complete, since it may require resetting and
@@ -1898,6 +2389,9 @@
      * application operational mode changes (such as switching from still
      * capture to video recording).
      *
+     * The HAL should return from this call in 500ms, and must return from this
+     * call in 1000ms.
+     *
      * Return values:
      *
      *  0:      On successful stream configuration
@@ -1933,6 +2427,12 @@
     /**
      * register_stream_buffers:
      *
+     * >= CAMERA_DEVICE_API_VERSION_3_2:
+     *
+     * DEPRECATED. This will not be called and must be set to NULL.
+     *
+     * <= CAMERA_DEVICE_API_VERSION_3_1:
+     *
      * Register buffers for a given stream with the HAL device. This method is
      * called by the framework after a new stream is defined by
      * configure_streams, and before buffers from that stream are included in a
@@ -1955,6 +2455,11 @@
      * the camera HAL should inspect the passed-in buffers here to determine any
      * platform-private pixel format information.
      *
+     * Performance requirements:
+     *
+     * This should be a non-blocking call. The HAL should return from this call
+     * in 1ms, and must return from this call in 5ms.
+     *
      * Return values:
      *
      *  0:      On successful registration of the new stream buffers
@@ -1992,6 +2497,11 @@
      * buffer may be returned for subsequent calls for the same template, or for
      * other templates.
      *
+     * Performance requirements:
+     *
+     * This should be a non-blocking call. The HAL should return from this call
+     * in 1ms, and must return from this call in 5ms.
+     *
      * Return values:
      *
      *   Valid metadata: On successful creation of a default settings
@@ -2036,6 +2546,22 @@
      * framework will wait on the sync fence before refilling and reusing the
      * input buffer.
      *
+     * >= CAMERA_DEVICE_API_VERSION_3_2:
+     *
+     * The input/output buffers provided by the framework in each request
+     * may be brand new (having never before seen by the HAL).
+     *
+     * ------------------------------------------------------------------------
+     * Performance considerations:
+     *
+     * Handling a new buffer should be extremely lightweight and there should be
+     * no frame rate degradation or frame jitter introduced.
+     *
+     * This call must return fast enough to ensure that the requested frame
+     * rate can be sustained, especially for streaming cases (post-processing
+     * quality settings set to FAST). The HAL should return this call in 1
+     * frame interval, and must return from this call in 4 frame intervals.
+     *
      * Return values:
      *
      *  0:      On a successful start to processing the capture request
@@ -2071,6 +2597,10 @@
      * The definition of vendor_tag_query_ops_t can be found in
      * system/media/camera/include/system/camera_metadata.h.
      *
+     * >= CAMERA_DEVICE_API_VERSION_3_2:
+     *    DEPRECATED. This function has been deprecated and should be set to
+     *    NULL by the HAL.  Please implement get_vendor_tag_ops in camera_common.h
+     *    instead.
      */
     void (*get_metadata_vendor_tag_ops)(const struct camera3_device*,
             vendor_tag_query_ops_t* ops);
@@ -2084,6 +2614,14 @@
      *
      * The passed-in file descriptor can be used to write debugging text using
      * dprintf() or write(). The text should be in ASCII encoding only.
+     *
+     * Performance requirements:
+     *
+     * This must be a non-blocking call. The HAL should return from this call
+     * in 1ms, must return from this call in 10ms. This call must avoid
+     * deadlocks, as it may be called at any point during camera operation.
+     * Any synchronization primitives used (such as mutex locks or semaphores)
+     * should be acquired with a timeout.
      */
     void (*dump)(const struct camera3_device *, int fd);
 
@@ -2095,22 +2633,73 @@
      * quickly as possible in order to prepare for a configure_streams() call.
      *
      * No buffers are required to be successfully returned, so every buffer
-     * held at the time of flush() (whether sucessfully filled or not) may be
+     * held at the time of flush() (whether successfully filled or not) may be
      * returned with CAMERA3_BUFFER_STATUS_ERROR. Note the HAL is still allowed
-     * to return valid (STATUS_OK) buffers during this call, provided they are
-     * succesfully filled.
+     * to return valid (CAMERA3_BUFFER_STATUS_OK) buffers during this call,
+     * provided they are successfully filled.
      *
      * All requests currently in the HAL are expected to be returned as soon as
      * possible.  Not-in-process requests should return errors immediately. Any
      * interruptible hardware blocks should be stopped, and any uninterruptible
      * blocks should be waited on.
      *
+     * More specifically, the HAL must follow below requirements for various cases:
+     *
+     * 1. For captures that are too late for the HAL to cancel/stop, and will be
+     *    completed normally by the HAL; i.e. the HAL can send shutter/notify and
+     *    process_capture_result and buffers as normal.
+     *
+     * 2. For pending requests that have not done any processing, the HAL must call notify
+     *    CAMERA3_MSG_ERROR_REQUEST, and return all the output buffers with
+     *    process_capture_result in the error state (CAMERA3_BUFFER_STATUS_ERROR).
+     *    The HAL must not place the release fence into an error state, instead,
+     *    the release fences must be set to the acquire fences passed by the framework,
+     *    or -1 if they have been waited on by the HAL already. This is also the path
+     *    to follow for any captures for which the HAL already called notify() with
+     *    CAMERA3_MSG_SHUTTER but won't be producing any metadata/valid buffers for.
+     *    After CAMERA3_MSG_ERROR_REQUEST, for a given frame, only process_capture_results with
+     *    buffers in CAMERA3_BUFFER_STATUS_ERROR are allowed. No further notifys or
+     *    process_capture_result with non-null metadata is allowed.
+     *
+     * 3. For partially completed pending requests that will not have all the output
+     *    buffers or perhaps missing metadata, the HAL should follow below:
+     *
+     *    3.1. Call notify with CAMERA3_MSG_ERROR_RESULT if some of the expected result
+     *    metadata (i.e. one or more partial metadata) won't be available for the capture.
+     *
+     *    3.2. Call notify with CAMERA3_MSG_ERROR_BUFFER for every buffer that won't
+     *         be produced for the capture.
+     *
+     *    3.3  Call notify with CAMERA3_MSG_SHUTTER with the capture timestamp before
+     *         any buffers/metadata are returned with process_capture_result.
+     *
+     *    3.4 For captures that will produce some results, the HAL must not call
+     *        CAMERA3_MSG_ERROR_REQUEST, since that indicates complete failure.
+     *
+     *    3.5. Valid buffers/metadata should be passed to the framework as normal.
+     *
+     *    3.6. Failed buffers should be returned to the framework as described for case 2.
+     *         But failed buffers do not have to follow the strict ordering valid buffers do,
+     *         and may be out-of-order with respect to valid buffers. For example, if buffers
+     *         A, B, C, D, E are sent, D and E are failed, then A, E, B, D, C is an acceptable
+     *         return order.
+     *
+     *    3.7. For fully-missing metadata, calling CAMERA3_MSG_ERROR_RESULT is sufficient, no
+     *         need to call process_capture_result with NULL metadata or equivalent.
+     *
      * flush() should only return when there are no more outstanding buffers or
-     * requests left in the HAL.  The framework may call configure_streams (as
+     * requests left in the HAL. The framework may call configure_streams (as
      * the HAL state is now quiesced) or may issue new requests.
      *
-     * A flush() call should only take 100ms or less. The maximum time it can
-     * take is 1 second.
+     * Note that it's sufficient to only support fully-succeeded and fully-failed result cases.
+     * However, it is highly desirable to support the partial failure cases as well, as it
+     * could help improve the flush call overall performance.
+     *
+     * Performance requirements:
+     *
+     * The HAL should return from this call in 100ms, and must return from this
+     * call in 1000ms. And this call must not be blocked longer than pipeline
+     * latency (see S7 for definition).
      *
      * Version information:
      *
@@ -2141,6 +2730,13 @@
     /**
      * common.version must equal CAMERA_DEVICE_API_VERSION_3_0 to identify this
      * device as implementing version 3.0 of the camera device HAL.
+     *
+     * Performance requirements:
+     *
+     * Camera open (common.module->common.methods->open) should return in 200ms, and must return
+     * in 500ms.
+     * Camera close (common.close) should return in 200ms, and must return in 500ms.
+     *
      */
     hw_device_t common;
     camera3_device_ops_t *ops;
diff --git a/include/hardware/camera_common.h b/include/hardware/camera_common.h
index 3a1233f..2508022 100644
--- a/include/hardware/camera_common.h
+++ b/include/hardware/camera_common.h
@@ -24,6 +24,7 @@
 #include <sys/types.h>
 #include <cutils/native_handle.h>
 #include <system/camera.h>
+#include <system/camera_vendor_tags.h>
 #include <hardware/hardware.h>
 #include <hardware/gralloc.h>
 
@@ -100,8 +101,9 @@
 #define CAMERA_DEVICE_API_VERSION_2_1 HARDWARE_DEVICE_API_VERSION(2, 1)
 #define CAMERA_DEVICE_API_VERSION_3_0 HARDWARE_DEVICE_API_VERSION(3, 0)
 #define CAMERA_DEVICE_API_VERSION_3_1 HARDWARE_DEVICE_API_VERSION(3, 1)
+#define CAMERA_DEVICE_API_VERSION_3_2 HARDWARE_DEVICE_API_VERSION(3, 2)
 
-// Device version 2.x is outdated; device version 3.0 is experimental
+// Device version 2.x is outdated; device version 3.x is experimental
 #define CAMERA_DEVICE_API_VERSION_CURRENT CAMERA_DEVICE_API_VERSION_1_0
 
 /**
@@ -251,65 +253,6 @@
 
 } camera_module_callbacks_t;
 
-/**
- * Set up vendor-specific tag query methods. These are needed to properly query
- * entries with vendor-specified tags, potentially returned by get_camera_info.
- *
- * This should be used in place of vendor_tag_query_ops, which are deprecated.
- */
-typedef struct vendor_tag_ops vendor_tag_ops_t;
-struct vendor_tag_ops {
-    /**
-     * Get the number of vendor tags supported on this platform. Used to
-     * calculate the size of buffer needed for holding the array of all tags
-     * returned by get_all_tags().
-     */
-    int (*get_tag_count)(const vendor_tag_ops_t *v);
-
-    /**
-     * Fill an array with all the supported vendor tags on this platform.
-     * get_tag_count() returns the number of tags supported, and
-     * tag_array will be allocated with enough space to hold all of the tags.
-     */
-    void (*get_all_tags)(const vendor_tag_ops_t *v, uint32_t *tag_array);
-
-    /**
-     * Get vendor section name for a vendor-specified entry tag. Only called for
-     * vendor-defined tags. The section name must start with the name of the
-     * vendor in the Java package style. For example, CameraZoom Inc. must
-     * prefix their sections with "com.camerazoom." Must return NULL if the tag
-     * is outside the bounds of vendor-defined sections.
-     *
-     * There may be different vendor-defined tag sections, for example the
-     * phone maker, the chipset maker, and the camera module maker may each
-     * have their own "com.vendor."-prefixed section.
-     *
-     * The memory pointed to by the return value must remain valid for the
-     * lifetime that the module is loaded, and is owned by the module.
-     */
-    const char *(*get_section_name)(const vendor_tag_ops_t *v, uint32_t tag);
-
-    /**
-     * Get tag name for a vendor-specified entry tag. Only called for
-     * vendor-defined tags. Must return NULL if the it is not a vendor-defined
-     * tag.
-     *
-     * The memory pointed to by the return value must remain valid for the
-     * lifetime that the module is loaded, and is owned by the module.
-     */
-    const char *(*get_tag_name)(const vendor_tag_ops_t *v, uint32_t tag);
-
-    /**
-     * Get tag type for a vendor-specified entry tag. Only called for tags >=
-     * 0x80000000. Must return -1 if the tag is outside the bounds of
-     * vendor-defined sections.
-     */
-    int (*get_tag_type)(const vendor_tag_ops_t *v, uint32_t tag);
-
-    /* reserved for future use */
-    void* reserved[8];
-};
-
 typedef struct camera_module {
     hw_module_t common;
 
@@ -365,6 +308,9 @@
      * HAL should fill in all the vendor tag operation methods, or leave ops
      * unchanged if no vendor tags are defined.
      *
+     * The vendor_tag_ops structure used here is defined in:
+     * system/media/camera/include/system/vendor_tags.h
+     *
      * Version information (based on camera_module_t.common.module_api_version):
      *
      *  CAMERA_MODULE_API_VERSION_1_x/2_0/2_1:
diff --git a/include/hardware/fingerprint.h b/include/hardware/fingerprint.h
new file mode 100644
index 0000000..b295ebb
--- /dev/null
+++ b/include/hardware/fingerprint.h
@@ -0,0 +1,127 @@
+/*
+ * Copyright (C) 2014 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef ANDROID_INCLUDE_HARDWARE_FINGERPRINT_H
+#define ANDROID_INCLUDE_HARDWARE_FINGERPRINT_H
+
+#define FINGERPRINT_MODULE_API_VERSION_1_0 HARDWARE_MODULE_API_VERSION(1, 0)
+#define FINGERPRINT_HARDWARE_MODULE_ID "fingerprint"
+
+typedef enum fingerprint_msg_type {
+    FINGERPRINT_ERROR = -1,
+    FINGERPRINT_SCANNED = 1,
+    FINGERPRINT_TEMPLATE_ENROLLING = 2,
+    FINGERPRINT_TEMPLATE_REMOVED = 4
+} fingerprint_msg_type_t;
+
+typedef enum fingerprint_error {
+    FINGERPRINT_ERROR_HW_UNAVAILABLE = 1,
+    FINGERPRINT_ERROR_BAD_CAPTURE = 2,
+    FINGERPRINT_ERROR_TIMEOUT = 3,
+    FINGERPRINT_ERROR_NO_SPACE = 4  /* No space available to store a template */
+} fingerprint_error_t;
+
+typedef struct fingerprint_enroll {
+    uint32_t id;
+    /* samples_remaining goes from N (no data collected, but N scans needed)
+     * to 0 (no more data is needed to build a template)
+     * If HAL fails to decrement samples_remaining between calls the client
+     * will declare template collection a failure and should abort the operation
+     * by calling module->common.methods->close() */
+    uint32_t samples_remaining;
+} fingerprint_enroll_t;
+
+typedef struct fingerprint_removed {
+    uint32_t id;
+} fingerprint_removed_t;
+
+typedef struct fingerprint_scanned {
+    uint32_t id; /* 0 is a special id and means no match */
+    uint32_t confidence; /* Goes form 0 (no match) to 0xffffFFFF (100% sure) */
+} fingerprint_scanned_t;
+
+typedef struct fingerprint_msg {
+    fingerprint_msg_type_t type;
+    union {
+        uint64_t raw;
+        fingerprint_error_t error;
+        fingerprint_enroll_t enroll;
+        fingerprint_removed_t removed;
+        fingerprint_scanned_t scan;
+    } data;
+} fingerprint_msg_t;
+
+/* Callback function type */
+typedef void (*fingerprint_notify_t)(fingerprint_msg_t msg);
+
+/* Synchronous operation */
+typedef struct fingerprint_device {
+    struct hw_device_t common;
+
+    /*
+     * Fingerprint enroll request:
+     * Switches the HAL state machine to collect and store a new fingerprint
+     * template. Switches back as soon as enroll is complete
+     * (fingerprint_msg.type == FINGERPRINT_TEMPLATE_ENROLLING &&
+     *  fingerprint_msg.data.enroll.samples_remaining == 0)
+     * or after timeout_sec seconds.
+     *
+     * Function return: 0 if enrollment process can be successfully started
+     *                 -1 otherwise. A notify() function may be called
+     *                    indicating the error condition.
+     */
+    int (*enroll)(struct fingerprint_device *dev, uint32_t timeout_sec);
+
+    /*
+     * Fingerprint remove request:
+     * deletes a fingerprint template.
+     * If the fingerprint id is 0 the entire template database will be removed.
+     * notify() will be called for each template deleted with
+     * fingerprint_msg.type == FINGERPRINT_TEMPLATE_REMOVED and
+     * fingerprint_msg.data.removed.id indicating each template id removed.
+     *
+     * Function return: 0 if fingerprint template(s) can be successfully deleted
+     *                 -1 otherwise.
+     */
+    int (*remove)(struct fingerprint_device *dev, uint32_t fingerprint_id);
+
+    /*
+     * Set notification callback:
+     * Registers a user function that would receive notifications from the HAL
+     * The call will block if the HAL state machine is in busy state until HAL
+     * leaves the busy state.
+     *
+     * Function return: 0 if callback function is successfuly registered
+     *                 -1 otherwise.
+     */
+    int (*set_notify)(struct fingerprint_device *dev,
+                        fingerprint_notify_t notify);
+
+    /*
+     * Client provided callback function to receive notifications.
+     * Do not set by hand, use the function above instead.
+     */
+    fingerprint_notify_t notify;
+
+    /* Reserved for future use. Must be NULL. */
+    void* reserved[8 - 4];
+} fingerprint_device_t;
+
+typedef struct fingerprint_module {
+    struct hw_module_t common;
+} fingerprint_module_t;
+
+#endif  /* ANDROID_INCLUDE_HARDWARE_FINGERPRINT_H */
diff --git a/include/hardware/gps.h b/include/hardware/gps.h
index 458b5b4..4167793 100644
--- a/include/hardware/gps.h
+++ b/include/hardware/gps.h
@@ -221,6 +221,11 @@
 #define AGPS_INTERFACE      "agps"
 
 /**
+ * Name of the Supl Certificate interface.
+ */
+#define SUPL_CERTIFICATE_INTERFACE  "supl-certificate"
+
+/**
  * Name for NI interface
  */
 #define GPS_NI_INTERFACE "gps-ni"
@@ -507,7 +512,7 @@
      */
     void  (*init)( AGpsCallbacks* callbacks );
     /**
-     * Notifies that a data connection is available and sets 
+     * Notifies that a data connection is available and sets
      * the name of the APN to be used for SUPL.
      */
     int  (*data_conn_open)( const char* apn );
@@ -516,7 +521,7 @@
      */
     int  (*data_conn_closed)();
     /**
-     * Notifies that a data connection is not available for AGPS. 
+     * Notifies that a data connection is not available for AGPS.
      */
     int  (*data_conn_failed)();
     /**
@@ -525,6 +530,72 @@
     int  (*set_server)( AGpsType type, const char* hostname, int port );
 } AGpsInterface;
 
+/** Error codes associated with certificate operations */
+#define AGPS_CERTIFICATE_OPERATION_SUCCESS               0
+#define AGPS_CERTIFICATE_ERROR_GENERIC                -100
+#define AGPS_CERTIFICATE_ERROR_TOO_MANY_CERTIFICATES  -101
+
+/** A data structure that represents an X.509 certificate using DER encoding */
+typedef struct {
+    size_t  length;
+    u_char* data;
+} DerEncodedCertificate;
+
+/**
+ * A type definition for SHA1 Fingerprints used to identify X.509 Certificates
+ * The Fingerprint is a digest of the DER Certificate that uniquely identifies it.
+ */
+typedef struct {
+    u_char data[20];
+} Sha1CertificateFingerprint;
+
+/** AGPS Inteface to handle SUPL certificate operations */
+typedef struct {
+    /** set to sizeof(SuplCertificateInterface) */
+    size_t size;
+
+    /**
+     * Installs a set of Certificates used for SUPL connections to the AGPS server.
+     * If needed the HAL should find out internally any certificates that need to be removed to
+     * accommodate the certificates to install.
+     * The certificates installed represent a full set of valid certificates needed to connect to
+     * AGPS SUPL servers.
+     * The list of certificates is required, and all must be available at the same time, when trying
+     * to establish a connection with the AGPS Server.
+     *
+     * Parameters:
+     *      certificates - A pointer to an array of DER encoded certificates that are need to be
+     *                     installed in the HAL.
+     *      length - The number of certificates to install.
+     * Returns:
+     *      AGPS_CERTIFICATE_OPERATION_SUCCESS if the operation is completed successfully
+     *      AGPS_CERTIFICATE_ERROR_TOO_MANY_CERTIFICATES if the HAL cannot store the number of
+     *          certificates attempted to be installed, the state of the certificates stored should
+     *          remain the same as before on this error case.
+     *
+     * IMPORTANT:
+     *      If needed the HAL should find out internally the set of certificates that need to be
+     *      removed to accommodate the certificates to install.
+     */
+    int  (*install_certificates) ( const DerEncodedCertificate* certificates, size_t length );
+
+    /**
+     * Notifies the HAL that a list of certificates used for SUPL connections are revoked. It is
+     * expected that the given set of certificates is removed from the internal store of the HAL.
+     *
+     * Parameters:
+     *      fingerprints - A pointer to an array of SHA1 Fingerprints to identify the set of
+     *                     certificates to revoke.
+     *      length - The number of fingerprints provided.
+     * Returns:
+     *      AGPS_CERTIFICATE_OPERATION_SUCCESS if the operation is completed successfully.
+     *
+     * IMPORTANT:
+     *      If any of the certificates provided (through its fingerprint) is not known by the HAL,
+     *      it should be ignored and continue revoking/deleting the rest of them.
+     */
+    int  (*revoke_certificates) ( const Sha1CertificateFingerprint* fingerprints, size_t length );
+} SuplCertificateInterface;
 
 /** Represents an NI request */
 typedef struct {
diff --git a/include/hardware/hardware.h b/include/hardware/hardware.h
index 416ae39..74f57aa 100644
--- a/include/hardware/hardware.h
+++ b/include/hardware/hardware.h
@@ -144,8 +144,12 @@
     /** module's dso */
     void* dso;
 
+#ifdef __LP64__
+    uint64_t reserved[32-7];
+#else
     /** padding to 128 bytes, reserved for future use */
     uint32_t reserved[32-7];
+#endif
 
 } hw_module_t;
 
@@ -186,7 +190,11 @@
     struct hw_module_t* module;
 
     /** padding reserved for future use */
+#ifdef __LP64__
+    uint64_t reserved[12];
+#else
     uint32_t reserved[12];
+#endif
 
     /** Close this device */
     int (*close)(struct hw_device_t* device);
diff --git a/include/hardware/hwcomposer.h b/include/hardware/hwcomposer.h
index 86479d3..afb4e99 100644
--- a/include/hardware/hwcomposer.h
+++ b/include/hardware/hwcomposer.h
@@ -121,6 +121,26 @@
      *   that the layer will be handled by the HWC (ie: it must not be
      *   composited with OpenGL ES).
      *
+     *
+     * HWC_SIDEBAND
+     *   Set by the caller before calling (*prepare)(), this value indicates
+     *   the contents of this layer come from a sideband video stream.
+     *
+     *   The h/w composer is responsible for receiving new image buffers from
+     *   the stream at the appropriate time (e.g. synchronized to a separate
+     *   audio stream), compositing them with the current contents of other
+     *   layers, and displaying the resulting image. This happens
+     *   independently of the normal prepare/set cycle. The prepare/set calls
+     *   only happen when other layers change, or when properties of the
+     *   sideband layer such as position or size change.
+     *
+     *   If the h/w composer can't handle the layer as a sideband stream for
+     *   some reason (e.g. unsupported scaling/blending/rotation, or too many
+     *   sideband layers) it can set compositionType to HWC_FRAMEBUFFER in
+     *   (*prepare)(). However, doing so will result in the layer being shown
+     *   as a solid color since the platform is not currently able to composite
+     *   sideband layers with the GPU. This may be improved in future
+     *   versions of the platform.
      */
     int32_t compositionType;
 
@@ -141,13 +161,21 @@
         hwc_color_t backgroundColor;
 
         struct {
-            /* handle of buffer to compose. This handle is guaranteed to have been
-             * allocated from gralloc using the GRALLOC_USAGE_HW_COMPOSER usage flag. If
-             * the layer's handle is unchanged across two consecutive prepare calls and
-             * the HWC_GEOMETRY_CHANGED flag is not set for the second call then the
-             * HWComposer implementation may assume that the contents of the buffer have
-             * not changed. */
-            buffer_handle_t handle;
+            union {
+                /* When compositionType is HWC_FRAMEBUFFER, HWC_OVERLAY,
+                 * HWC_FRAMEBUFFER_TARGET, this is the handle of the buffer to
+                 * compose. This handle is guaranteed to have been allocated
+                 * from gralloc using the GRALLOC_USAGE_HW_COMPOSER usage flag.
+                 * If the layer's handle is unchanged across two consecutive
+                 * prepare calls and the HWC_GEOMETRY_CHANGED flag is not set
+                 * for the second call then the HWComposer implementation may
+                 * assume that the contents of the buffer have not changed. */
+                buffer_handle_t handle;
+
+                /* When compositionType is HWC_SIDEBAND, this is the handle
+                 * of the sideband video stream to compose. */
+                const native_handle_t* sidebandStream;
+            };
 
             /* transformation to apply to the buffer during composition */
             uint32_t transform;
@@ -191,6 +219,10 @@
              * reads from them are complete before the framebuffer is ready for
              * display.
              *
+             * HWC_SIDEBAND layers will never have an acquire fence, since
+             * synchronization is handled through implementation-defined
+             * sideband mechanisms.
+             *
              * The HWC takes ownership of the acquireFenceFd and is responsible
              * for closing it when no longer needed.
              */
@@ -214,6 +246,10 @@
              * produce a release fence for them. The releaseFenceFd will be -1
              * for these layers when set() is called.
              *
+             * Since HWC_SIDEBAND buffers don't pass through the HWC client,
+             * the HWC shouldn't produce a release fence for them. The
+             * releaseFenceFd will be -1 for these layers when set() is called.
+             *
              * The HWC client taks ownership of the releaseFenceFd and is
              * responsible for closing it when no longer needed.
              */
diff --git a/include/hardware/hwcomposer_defs.h b/include/hardware/hwcomposer_defs.h
index c69a4bc..242e3f6 100644
--- a/include/hardware/hwcomposer_defs.h
+++ b/include/hardware/hwcomposer_defs.h
@@ -36,6 +36,7 @@
 #define HWC_DEVICE_API_VERSION_1_1  HARDWARE_DEVICE_API_VERSION_2(1, 1, HWC_HEADER_VERSION)
 #define HWC_DEVICE_API_VERSION_1_2  HARDWARE_DEVICE_API_VERSION_2(1, 2, HWC_HEADER_VERSION)
 #define HWC_DEVICE_API_VERSION_1_3  HARDWARE_DEVICE_API_VERSION_2(1, 3, HWC_HEADER_VERSION)
+#define HWC_DEVICE_API_VERSION_1_4  HARDWARE_DEVICE_API_VERSION_2(1, 4, HWC_HEADER_VERSION)
 
 enum {
     /* hwc_composer_device_t::set failed in EGL */
@@ -95,6 +96,10 @@
     /* this layer holds the result of compositing the HWC_FRAMEBUFFER layers.
      * Added in HWC_DEVICE_API_VERSION_1_1. */
     HWC_FRAMEBUFFER_TARGET = 3,
+
+    /* this layer's contents are taken from a sideband buffer stream.
+     * Added in HWC_DEVICE_API_VERSION_1_4. */
+    HWC_SIDEBAND = 4,
 };
 
 /*
diff --git a/include/hardware/nfc_tag.h b/include/hardware/nfc_tag.h
new file mode 100644
index 0000000..72028f4
--- /dev/null
+++ b/include/hardware/nfc_tag.h
@@ -0,0 +1,83 @@
+/*
+ * Copyright (C) 2013 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef ANDROID_NFC_TAG_HAL_INTERFACE_H
+#define ANDROID_NFC_TAG_HAL_INTERFACE_H
+
+#include <stdint.h>
+
+#include <hardware/hardware.h>
+
+__BEGIN_DECLS
+
+/*
+ * HAL for programmable NFC tags.
+ *
+ */
+
+#define NFC_TAG_HARDWARE_MODULE_ID "nfc_tag"
+#define NFC_TAG_ID "tag"
+
+typedef struct nfc_tag_module_t {
+    struct hw_module_t common;
+} nfc_tag_module_t;
+
+typedef struct nfc_tag_device {
+    struct hw_device_t common;
+
+    /**
+     * Initialize the NFC tag.
+     *
+     * The driver must:
+     *   * Set the static lock bytes to read only
+     *   * Configure the Capability Container to disable write acess
+     *         eg: 0xE1 0x10 <size> 0x0F
+     *
+     * This function is called once before any calls to setContent().
+     *
+     * Return 0 on success or -errno on error.
+     */
+    int (*init)(const struct nfc_tag_device *dev);
+
+    /**
+     * Set the NFC tag content.
+     *
+     * The driver must write <data> in the data area of the tag starting at
+     * byte 0 of block 4 and zero the rest of the data area.
+     *
+     * Returns 0 on success or -errno on error.
+     */
+    int (*setContent)(const struct nfc_tag_device *dev, const uint8_t *data, size_t len);
+
+    /**
+     * Returns the memory size of the data area.
+     */
+    int (*getMemorySize)(const struct nfc_tag_device *dev);
+} nfc_tag_device_t;
+
+static inline int nfc_tag_open(const struct hw_module_t* module,
+                               nfc_tag_device_t** dev) {
+    return module->methods->open(module, NFC_TAG_ID,
+                                 (struct hw_device_t**)dev);
+}
+
+static inline int nfc_tag_close(nfc_tag_device_t* dev) {
+    return dev->common.close(&dev->common);
+}
+
+__END_DECLS
+
+#endif // ANDROID_NFC_TAG_HAL_INTERFACE_H
diff --git a/include/hardware/power.h b/include/hardware/power.h
index 89d57ed..dc33705 100644
--- a/include/hardware/power.h
+++ b/include/hardware/power.h
@@ -44,7 +44,8 @@
      * KLP.
      */
     POWER_HINT_VIDEO_ENCODE = 0x00000003,
-    POWER_HINT_VIDEO_DECODE = 0x00000004
+    POWER_HINT_VIDEO_DECODE = 0x00000004,
+    POWER_HINT_LOW_POWER = 0x00000005
 } power_hint_t;
 
 /**
@@ -112,6 +113,13 @@
      *     and it may be appropriate to raise speeds of CPU, memory bus,
      *     etc.  The data parameter is unused.
      *
+     * POWER_HINT_LOW_POWER
+     *
+     *     Low power mode is activated or deactivated. Low power mode
+     *     is intended to save battery at the cost of performance. The data
+     *     parameter is non-zero when low power mode is activated, and zero
+     *     when deactivated.
+     *
      * A particular platform may choose to ignore any hint.
      *
      * availability: version 0.2
diff --git a/include/hardware/sensors.h b/include/hardware/sensors.h
index ef86a40..9327c41 100644
--- a/include/hardware/sensors.h
+++ b/include/hardware/sensors.h
@@ -34,6 +34,13 @@
 #define SENSORS_DEVICE_API_VERSION_1_0  HARDWARE_DEVICE_API_VERSION_2(1, 0, SENSORS_HEADER_VERSION)
 #define SENSORS_DEVICE_API_VERSION_1_1  HARDWARE_DEVICE_API_VERSION_2(1, 1, SENSORS_HEADER_VERSION)
 #define SENSORS_DEVICE_API_VERSION_1_2  HARDWARE_DEVICE_API_VERSION_2(1, 2, SENSORS_HEADER_VERSION)
+#define SENSORS_DEVICE_API_VERSION_1_3  HARDWARE_DEVICE_API_VERSION_2(1, 3, SENSORS_HEADER_VERSION)
+
+/**
+ * Please see the Sensors section of source.android.com for an
+ * introduction to and detailed descriptions of Android sensor types:
+ * http://source.android.com/devices/sensors/index.html
+ */
 
 /**
  * The id of this module
@@ -57,9 +64,12 @@
 
 
 /*
+ * **** Deprecated *****
  * flags for (*batch)()
  * Availability: SENSORS_DEVICE_API_VERSION_1_0
- * see (*batch)() documentation for details
+ * see (*batch)() documentation for details.
+ * Deprecated as of  SENSORS_DEVICE_API_VERSION_1_3.
+ * WAKE_UP_* sensors replace WAKE_UPON_FIFO_FULL concept.
  */
 enum {
     SENSORS_BATCH_DRY_RUN               = 0x00000001,
@@ -82,74 +92,25 @@
  */
 #define SENSOR_PERMISSION_BODY_SENSORS "android.permission.BODY_SENSORS"
 
-/**
- * Definition of the axis used by the sensor HAL API
- *
- * This API is relative to the screen of the device in its default orientation,
- * that is, if the device can be used in portrait or landscape, this API
- * is only relative to the NATURAL orientation of the screen. In other words,
- * the axis are not swapped when the device's screen orientation changes.
- * Higher level services /may/ perform this transformation.
- *
- *   x<0         x>0
- *                ^
- *                |
- *    +-----------+-->  y>0
- *    |           |
- *    |           |
- *    |           |
- *    |           |   / z<0
- *    |           |  /
- *    |           | /
- *    O-----------+/
- *    |[]  [ ]  []/
- *    +----------/+     y<0
- *              /
- *             /
- *           |/ z>0 (toward the sky)
- *
- *    O: Origin (x=0,y=0,z=0)
- *
- */
-
 /*
- * Interaction with suspend mode
- *
- * Unless otherwise noted, an enabled sensor shall not prevent the
- * SoC to go into suspend mode. It is the responsibility of applications
- * to keep a partial wake-lock should they wish to receive sensor
- * events while the screen is off. While in suspend mode, and unless
- * otherwise noted (batch mode, sensor particularities, ...), enabled sensors'
- * events are lost.
- *
- * Note that conceptually, the sensor itself is not de-activated while in
- * suspend mode -- it's just that the data it returns are lost. As soon as
- * the SoC gets out of suspend mode, operations resume as usual. Of course,
- * in practice sensors shall be disabled while in suspend mode to
- * save power, unless batch mode is active, in which case they must
- * continue fill their internal FIFO (see the documentation of batch() to
- * learn how suspend interacts with batch mode).
- *
- * In batch mode, and only when the flag SENSORS_BATCH_WAKE_UPON_FIFO_FULL is
- * set and supported, the specified sensor must be able to wake-up the SoC and
- * be able to buffer at least 10 seconds worth of the requested sensor events.
- *
- * There are notable exceptions to this behavior, which are sensor-dependent
- * (see sensor types definitions below)
- *
- *
- * The sensor type documentation below specifies the wake-up behavior of
- * each sensor:
- *   wake-up: yes     this sensor must wake-up the SoC to deliver events
- *   wake-up: no      this sensor shall not wake-up the SoC, events are dropped
- *
+ * Availability: SENSORS_DEVICE_API_VERSION_1_3
+ * Sensor flags used in sensor_t.flags.
  */
+enum {
+    /*
+     * Whether this sensor wakes up the AP from suspend mode when data is available.
+     */
+    SENSOR_FLAG_WAKE_UP = 1U << 0
+};
 
 /*
  * Sensor type
  *
  * Each sensor has a type which defines what this sensor measures and how
- * measures are reported. All types are defined below.
+ * measures are reported. See the Base sensors and Composite sensors lists
+ * for complete descriptions:
+ * http://source.android.com/devices/sensors/base_triggers.html
+ * http://source.android.com/devices/sensors/composite_sensors.html
  *
  * Device manufacturers (OEMs) can define their own sensor types, for
  * their private use by applications or services provided by them. Such
@@ -196,47 +157,6 @@
 #define SENSOR_TYPE_DEVICE_PRIVATE_BASE     0x10000
 
 /*
- * Sensor fusion and virtual sensors
- *
- * Many sensor types are or can be implemented as virtual sensors from
- * physical sensors on the device. For instance the rotation vector sensor,
- * orientation sensor, step-detector, step-counter, etc...
- *
- * From the point of view of this API these virtual sensors MUST appear as
- * real, individual sensors. It is the responsibility of the driver and HAL
- * to make sure this is the case.
- *
- * In particular, all sensors must be able to function concurrently.
- * For example, if defining both an accelerometer and a step counter,
- * then both must be able to work concurrently.
- */
-
-/*
- * Trigger modes
- *
- * Sensors can report events in different ways called trigger modes,
- * each sensor type has one and only one trigger mode associated to it.
- * Currently there are four trigger modes defined:
- *
- * continuous: events are reported at a constant rate defined by setDelay().
- *             eg: accelerometers, gyroscopes.
- * on-change:  events are reported only if the sensor's value has changed.
- *             setDelay() is used to set a lower limit to the reporting
- *             period (minimum time between two events).
- *             The HAL must return an event immediately when an on-change
- *             sensor is activated.
- *             eg: proximity, light sensors
- * one-shot:   upon detection of an event, the sensor deactivates itself and
- *             then sends a single event. Order matters to avoid race
- *             conditions. No other event is sent until the sensor get
- *             reactivated. setDelay() is ignored.
- *             eg: significant motion sensor
- * special:    see details in the sensor type specification below
- *
- */
-
-
-/*
  * SENSOR_TYPE_META_DATA
  * trigger-mode: n/a
  * wake-up sensor: n/a
@@ -277,30 +197,6 @@
  *  All values are in SI units (m/s^2) and measure the acceleration of the
  *  device minus the force of gravity.
  *
- *  Acceleration sensors return sensor events for all 3 axes at a constant
- *  rate defined by setDelay().
- *
- *  x: Acceleration on the x-axis
- *  y: Acceleration on the y-axis
- *  z: Acceleration on the z-axis
- *
- * Note that the readings from the accelerometer include the acceleration
- * due to gravity (which is opposite to the direction of the gravity vector).
- *
- *  Examples:
- *    The norm of <x, y, z>  should be close to 0 when in free fall.
- *
- *    When the device lies flat on a table and is pushed on its left side
- *    toward the right, the x acceleration value is positive.
- *
- *    When the device lies flat on a table, the acceleration value is +9.81,
- *    which correspond to the acceleration of the device (0 m/s^2) minus the
- *    force of gravity (-9.81 m/s^2).
- *
- *    When the device lies flat on a table and is pushed toward the sky, the
- *    acceleration value is greater than +9.81, which correspond to the
- *    acceleration of the device (+A m/s^2) minus the force of
- *    gravity (-9.81 m/s^2).
  */
 #define SENSOR_TYPE_ACCELEROMETER                    (1)
 #define SENSOR_STRING_TYPE_ACCELEROMETER             "android.sensor.accelerometer"
@@ -313,12 +209,6 @@
  *  All values are in micro-Tesla (uT) and measure the geomagnetic
  *  field in the X, Y and Z axis.
  *
- *  Returned values include calibration mechanisms such that the vector is
- *  aligned with the magnetic declination and heading of the earth's
- *  geomagnetic field.
- *
- *  Magnetic Field sensors return sensor events for all 3 axes at a constant
- *  rate defined by setDelay().
  */
 #define SENSOR_TYPE_GEOMAGNETIC_FIELD                (2)
 #define SENSOR_TYPE_MAGNETIC_FIELD  SENSOR_TYPE_GEOMAGNETIC_FIELD
@@ -328,39 +218,11 @@
  * SENSOR_TYPE_ORIENTATION
  * trigger-mode: continuous
  * wake-up sensor: no
- * 
+ *
  * All values are angles in degrees.
- * 
+ *
  * Orientation sensors return sensor events for all 3 axes at a constant
  * rate defined by setDelay().
- *
- * azimuth: angle between the magnetic north direction and the Y axis, around 
- *  the Z axis (0<=azimuth<360).
- *      0=North, 90=East, 180=South, 270=West
- * 
- * pitch: Rotation around X axis (-180<=pitch<=180), with positive values when
- *  the z-axis moves toward the y-axis.
- *
- * roll: Rotation around Y axis (-90<=roll<=90), with positive values when
- *  the x-axis moves towards the z-axis.
- *
- * Note: For historical reasons the roll angle is positive in the clockwise
- *  direction (mathematically speaking, it should be positive in the
- *  counter-clockwise direction):
- *
- *                Z
- *                ^
- *  (+roll)  .--> |
- *          /     |
- *         |      |  roll: rotation around Y axis
- *     X <-------(.)
- *                 Y
- *       note that +Y == -roll
- *
- *
- *
- * Note: This definition is different from yaw, pitch and roll used in aviation
- *  where the X axis is along the long side of the plane (tail to nose).
  */
 #define SENSOR_TYPE_ORIENTATION                      (3)
 #define SENSOR_STRING_TYPE_ORIENTATION               "android.sensor.orientation"
@@ -371,17 +233,7 @@
  * wake-up sensor: no
  *
  *  All values are in radians/second and measure the rate of rotation
- *  around the X, Y and Z axis.  The coordinate system is the same as is
- *  used for the acceleration sensor. Rotation is positive in the
- *  counter-clockwise direction (right-hand rule). That is, an observer
- *  looking from some positive location on the x, y or z axis at a device
- *  positioned on the origin would report positive rotation if the device
- *  appeared to be rotating counter clockwise. Note that this is the
- *  standard mathematical definition of positive rotation and does not agree
- *  with the definition of roll given earlier.
- *  The range should at least be 17.45 rad/s (ie: ~1000 deg/s).
- *
- *  automatic gyro-drift compensation is allowed but not required.
+ *  around the X, Y and Z axis.
  */
 #define SENSOR_TYPE_GYROSCOPE                        (4)
 #define SENSOR_STRING_TYPE_GYROSCOPE                 "android.sensor.gyroscope"
@@ -413,12 +265,9 @@
 /*
  * SENSOR_TYPE_PROXIMITY
  * trigger-mode: on-change
- * wake-up sensor: yes
+ * wake-up sensor: yes (set SENSOR_FLAG_WAKE_UP flag)
  *
- * The distance value is measured in centimeters.  Note that some proximity
- * sensors only support a binary "close" or "far" measurement.  In this case,
- * the sensor should report its maxRange value in the "far" state and a value
- * less than maxRange in the "near" state.
+ * The value corresponds to the distance to the nearest object in centimeters.
  */
 #define SENSOR_TYPE_PROXIMITY                        (8)
 #define SENSOR_STRING_TYPE_PROXIMITY                 "android.sensor.proximity"
@@ -429,10 +278,7 @@
  * wake-up sensor: no
  *
  * A gravity output indicates the direction of and magnitude of gravity in
- * the devices's coordinates.  On Earth, the magnitude is 9.8 m/s^2.
- * Units are m/s^2.  The coordinate system is the same as is used for the
- * acceleration sensor. When the device is at rest, the output of the
- * gravity sensor should be identical to that of the accelerometer.
+ * the devices's coordinates.
  */
 #define SENSOR_TYPE_GRAVITY                          (9)
 #define SENSOR_STRING_TYPE_GRAVITY                   "android.sensor.gravity"
@@ -444,13 +290,6 @@
  *
  * Indicates the linear acceleration of the device in device coordinates,
  * not including gravity.
- *
- * The output is conceptually:
- *    output of TYPE_ACCELERATION - output of TYPE_GRAVITY
- *
- * Readings on all axes should be close to 0 when device lies on a table.
- * Units are m/s^2.
- * The coordinate system is the same as is used for the acceleration sensor.
  */
 #define SENSOR_TYPE_LINEAR_ACCELERATION             (10)
 #define SENSOR_STRING_TYPE_LINEAR_ACCELERATION      "android.sensor.linear_acceleration"
@@ -462,46 +301,7 @@
  * wake-up sensor: no
  *
  * The rotation vector symbolizes the orientation of the device relative to the
- * East-North-Up coordinates frame. It is usually obtained by integration of
- * accelerometer, gyroscope and magnetometer readings.
- *
- * The East-North-Up coordinate system is defined as a direct orthonormal basis
- * where:
- * - X points east and is tangential to the ground.
- * - Y points north and is tangential to the ground.
- * - Z points towards the sky and is perpendicular to the ground.
- *
- * The orientation of the phone is represented by the rotation necessary to
- * align the East-North-Up coordinates with the phone's coordinates. That is,
- * applying the rotation to the world frame (X,Y,Z) would align them with the
- * phone coordinates (x,y,z).
- *
- * The rotation can be seen as rotating the phone by an angle theta around
- * an axis rot_axis to go from the reference (East-North-Up aligned) device
- * orientation to the current device orientation.
- *
- * The rotation is encoded as the 4 (reordered) components of a unit quaternion:
- *   sensors_event_t.data[0] = rot_axis.x*sin(theta/2)
- *   sensors_event_t.data[1] = rot_axis.y*sin(theta/2)
- *   sensors_event_t.data[2] = rot_axis.z*sin(theta/2)
- *   sensors_event_t.data[3] = cos(theta/2)
- * where
- *   - rot_axis.x,y,z are the North-East-Up coordinates of a unit length vector
- *     representing the rotation axis
- *   - theta is the rotation angle
- *
- * The quaternion must be of norm 1 (it is a unit quaternion). Failure to ensure
- * this will cause erratic client behaviour.
- *
- * In addition, this sensor reports an estimated heading accuracy.
- *   sensors_event_t.data[4] = estimated_accuracy (in radians)
- * The heading error must be less than estimated_accuracy 95% of the time
- *
- * This sensor must use a gyroscope and an accelerometer as main orientation
- * change input.
- *
- * This sensor can also include magnetometer input to make up for gyro drift,
- * but it cannot be implemented using only a magnetometer.
+ * East-North-Up coordinates frame.
  */
 #define SENSOR_TYPE_ROTATION_VECTOR                 (11)
 #define SENSOR_STRING_TYPE_ROTATION_VECTOR          "android.sensor.rotation_vector"
@@ -534,35 +334,6 @@
  *
  *  Similar to SENSOR_TYPE_MAGNETIC_FIELD, but the hard iron calibration is
  *  reported separately instead of being included in the measurement.
- *  Factory calibration and temperature compensation should still be applied to
- *  the "uncalibrated" measurement.
- *  Separating away the hard iron calibration estimation allows the system to
- *  better recover from bad hard iron estimation.
- *
- *  All values are in micro-Tesla (uT) and measure the ambient magnetic
- *  field in the X, Y and Z axis. Assumptions that the the magnetic field
- *  is due to the Earth's poles should be avoided.
- *
- *  The uncalibrated_magnetic event contains
- *  - 3 fields for uncalibrated measurement: x_uncalib, y_uncalib, z_uncalib.
- *    Each is a component of the measured magnetic field, with soft iron
- *    and temperature compensation applied, but not hard iron calibration.
- *    These values should be continuous (no re-calibration should cause a jump).
- *  - 3 fields for hard iron bias estimates: x_bias, y_bias, z_bias.
- *    Each field is a component of the estimated hard iron calibration.
- *    They represent the offsets to apply to the calibrated readings to obtain
- *    uncalibrated readings (x_uncalib ~= x_calibrated + x_bias)
- *    These values are expected to jump as soon as the estimate of the hard iron
- *    changes, and they should be stable the rest of the time.
- *
- *  If this sensor is present, then the corresponding
- *  SENSOR_TYPE_MAGNETIC_FIELD must be present and both must return the
- *  same sensor_t::name and sensor_t::vendor.
- *
- *  Minimum filtering should be applied to this sensor. In particular, low pass
- *  filters should be avoided.
- *
- * See SENSOR_TYPE_MAGNETIC_FIELD for more information
  */
 #define SENSOR_TYPE_MAGNETIC_FIELD_UNCALIBRATED     (14)
 #define SENSOR_STRING_TYPE_MAGNETIC_FIELD_UNCALIBRATED "android.sensor.magnetic_field_uncalibrated"
@@ -573,21 +344,7 @@
  * wake-up sensor: no
  *
  *  Similar to SENSOR_TYPE_ROTATION_VECTOR, but not using the geomagnetic
- *  field. Therefore the Y axis doesn't point north, but instead to some other
- *  reference. That reference is allowed to drift by the same order of
- *  magnitude than the gyroscope drift around the Z axis.
- *
- *  This sensor does not report an estimated heading accuracy:
- *    sensors_event_t.data[4] is reserved and should be set to 0
- *
- *  In the ideal case, a phone rotated and returning to the same real-world
- *  orientation should report the same game rotation vector
- *  (without using the earth's geomagnetic field).
- *
- *  This sensor must be based on a gyroscope. It cannot be implemented using
- *  a magnetometer.
- *
- * see SENSOR_TYPE_ROTATION_VECTOR for more details
+ *  field.
  */
 #define SENSOR_TYPE_GAME_ROTATION_VECTOR            (15)
 #define SENSOR_STRING_TYPE_GAME_ROTATION_VECTOR     "android.sensor.game_rotation_vector"
@@ -598,92 +355,19 @@
  * wake-up sensor: no
  *
  *  All values are in radians/second and measure the rate of rotation
- *  around the X, Y and Z axis. An estimation of the drift on each axis is
- *  reported as well.
- *
- *  No gyro-drift compensation shall be performed.
- *  Factory calibration and temperature compensation should still be applied
- *  to the rate of rotation (angular speeds).
- *
- *  The coordinate system is the same as is
- *  used for the acceleration sensor. Rotation is positive in the
- *  counter-clockwise direction (right-hand rule). That is, an observer
- *  looking from some positive location on the x, y or z axis at a device
- *  positioned on the origin would report positive rotation if the device
- *  appeared to be rotating counter clockwise. Note that this is the
- *  standard mathematical definition of positive rotation and does not agree
- *  with the definition of roll given earlier.
- *  The range should at least be 17.45 rad/s (ie: ~1000 deg/s).
- *
- *  Content of an uncalibrated_gyro event: (units are rad/sec)
- *   x_uncalib : angular speed (w/o drift compensation) around the X axis
- *   y_uncalib : angular speed (w/o drift compensation) around the Y axis
- *   z_uncalib : angular speed (w/o drift compensation) around the Z axis
- *   x_bias : estimated drift around X axis in rad/s
- *   y_bias : estimated drift around Y axis in rad/s
- *   z_bias : estimated drift around Z axis in rad/s
- *
- *  IMPLEMENTATION NOTES:
- *
- *  If the implementation is not able to estimate the drift, then this
- *  sensor MUST NOT be reported by this HAL. Instead, the regular
- *  SENSOR_TYPE_GYROSCOPE is used without drift compensation.
- *
- *  If this sensor is present, then the corresponding
- *  SENSOR_TYPE_GYROSCOPE must be present and both must return the
- *  same sensor_t::name and sensor_t::vendor.
+ *  around the X, Y and Z axis.
  */
 #define SENSOR_TYPE_GYROSCOPE_UNCALIBRATED          (16)
 #define SENSOR_STRING_TYPE_GYROSCOPE_UNCALIBRATED   "android.sensor.gyroscope_uncalibrated"
 
-
 /*
  * SENSOR_TYPE_SIGNIFICANT_MOTION
  * trigger-mode: one-shot
- * wake-up sensor: yes
+ * wake-up sensor: yes (set SENSOR_FLAG_WAKE_UP flag)
  *
  * A sensor of this type triggers an event each time significant motion
  * is detected and automatically disables itself.
  * The only allowed value to return is 1.0.
- *
- * A significant motion is a motion that might lead to a change in the user
- * location.
- * Examples of such motions are:
- *   walking, biking, sitting in a moving car, coach or train.
- * Examples of situations that should not trigger significant motion:
- * - phone in pocket and person is not moving
- * - phone is on a table, even if the table shakes a bit due to nearby traffic
- *   or washing machine
- *
- * A note on false positive / false negative / power consumption tradeoff
- *  - The goal of this sensor is to save power.
- *  - Triggering an event when the user is not moving (false positive) is costly
- *    in terms of power, so it should be avoided.
- *  - Not triggering an event when the user is moving (false negative) is
- *    acceptable as long as it is not done repeatedly. If the user has been
- *    walking for 10 seconds, not triggering an event within those 10 seconds
- *    is not acceptable.
- *
- *  IMPORTANT NOTE: this sensor type is very different from other types
- *  in that it must work when the screen is off without the need of
- *  holding a partial wake-lock and MUST allow the SoC to go into suspend.
- *  When significant motion is detected, the sensor must awaken the SoC and
- *  the event be reported.
- *
- *  If a particular hardware cannot support this mode of operation then this
- *  sensor type MUST NOT be reported by the HAL. ie: it is not acceptable
- *  to "emulate" this sensor in the HAL.
- *
- *  The whole point of this sensor type is to save power by keeping the
- *  SoC in suspend mode when the device is at rest.
- *
- *  When the sensor is not activated, it must also be deactivated in the
- *  hardware: it must not wake up the SoC anymore, even in case of
- *  significant motion.
- *
- *  setDelay() has no effect and is ignored.
- *  Once a "significant motion" event is returned, a sensor of this type
- *  must disables itself automatically, as if activate(..., 0) had been called.
  */
 
 #define SENSOR_TYPE_SIGNIFICANT_MOTION              (17)
@@ -695,21 +379,8 @@
  * wake-up sensor: no
  *
  * A sensor of this type triggers an event each time a step is taken
- * by the user. The only allowed value to return is 1.0 and an event is
- * generated for each step. Like with any other event, the timestamp
- * indicates when the event (here the step) occurred, this corresponds to when
- * the foot hit the ground, generating a high variation in acceleration.
- *
- * While this sensor operates, it shall not disrupt any other sensors, in
- * particular, but not limited to, the accelerometer; which might very well
- * be in use as well.
- *
- * This sensor must be low power. That is, if the step detection cannot be
- * done in hardware, this sensor should not be defined. Also, when the
- * step detector is activated and the accelerometer is not, only steps should
- * trigger interrupts (not accelerometer data).
- *
- * setDelay() has no impact on this sensor type
+ * by the user. The only allowed value to return is 1.0 and an event
+ * is generated for each step.
  */
 
 #define SENSOR_TYPE_STEP_DETECTOR                   (18)
@@ -724,46 +395,6 @@
  * A sensor of this type returns the number of steps taken by the user since
  * the last reboot while activated. The value is returned as a uint64_t and is
  * reset to zero only on a system / android reboot.
- *
- * The timestamp of the event is set to the time when the first step
- * for that event was taken.
- * See SENSOR_TYPE_STEP_DETECTOR for the signification of the time of a step.
- *
- *  The minimum size of the hardware's internal counter shall be 16 bits
- *  (this restriction is here to avoid too frequent wake-ups when the
- *  delay is very large).
- *
- *  IMPORTANT NOTE: this sensor type is different from other types
- *  in that it must work when the screen is off without the need of
- *  holding a partial wake-lock and MUST allow the SoC to go into suspend.
- *  Unlike other sensors, while in suspend mode this sensor must stay active,
- *  no events are reported during that time but, steps continue to be
- *  accounted for; an event will be reported as soon as the SoC resumes if
- *  the timeout has expired.
- *
- *    In other words, when the screen is off and the device allowed to
- *    go into suspend mode, we don't want to be woken up, regardless of the
- *    setDelay() value, but the steps shall continue to be counted.
- *
- *    The driver must however ensure that the internal step count never
- *    overflows. It is allowed in this situation to wake the SoC up so the
- *    driver can do the counter maintenance.
- *
- *  While this sensor operates, it shall not disrupt any other sensors, in
- *  particular, but not limited to, the accelerometer; which might very well
- *  be in use as well.
- *
- *  If a particular hardware cannot support these modes of operation then this
- *  sensor type MUST NOT be reported by the HAL. ie: it is not acceptable
- *  to "emulate" this sensor in the HAL.
- *
- * This sensor must be low power. That is, if the step detection cannot be
- * done in hardware, this sensor should not be defined. Also, when the
- * step counter is activated and the accelerometer is not, only steps should
- * trigger interrupts (not accelerometer data).
- *
- *  The whole point of this sensor type is to save power by keeping the
- *  SoC in suspend mode when the device is at rest.
  */
 
 #define SENSOR_TYPE_STEP_COUNTER                    (19)
@@ -776,18 +407,6 @@
  *
  *  Similar to SENSOR_TYPE_ROTATION_VECTOR, but using a magnetometer instead
  *  of using a gyroscope.
- *
- *  This sensor must be based on a magnetometer. It cannot be implemented using
- *  a gyroscope, and gyroscope input cannot be used by this sensor, as the
- *  goal of this sensor is to be low power.
- *  The accelerometer can be (and usually is) used.
- *
- *  Just like SENSOR_TYPE_ROTATION_VECTOR, this sensor reports an estimated
- *  heading accuracy:
- *    sensors_event_t.data[4] = estimated_accuracy (in radians)
- *  The heading error must be less than estimated_accuracy 95% of the time
- *
- * see SENSOR_TYPE_ROTATION_VECTOR for more details
  */
 #define SENSOR_TYPE_GEOMAGNETIC_ROTATION_VECTOR     (20)
 #define SENSOR_STRING_TYPE_GEOMAGNETIC_ROTATION_VECTOR "android.sensor.geomagnetic_rotation_vector"
@@ -806,6 +425,135 @@
 #define SENSOR_TYPE_HEART_RATE                      (21)
 #define SENSOR_STRING_TYPE_HEART_RATE               "android.sensor.heart_rate"
 
+/*
+ * SENSOR_TYPE_NON_WAKE_UP_PROXIMITY_SENSOR
+ * Same as proximity_sensor but does not wake up the AP from suspend mode.
+ * wake-up sensor: no
+ */
+#define SENSOR_TYPE_NON_WAKE_UP_PROXIMITY_SENSOR           (22)
+#define SENSOR_STRING_TYPE_NON_WAKE_UP_PROXIMITY_SENSOR    "android.sensor.non_wake_up_proximity_sensor"
+
+/*
+ * The sensors below are wake_up variants of the base sensor types defined
+ * above. When registered in batch mode, these sensors will wake up the AP when
+ * their FIFOs are full or when the batch timeout expires. A separate FIFO has
+ * to be maintained for wake up sensors and non wake up sensors. The non wake-up
+ * sensors need to overwrite their FIFOs when they are full till the AP wakes up
+ * and the wake-up sensors will wake-up the AP when their FIFOs are full or when
+ * the batch timeout expires without losing events.
+ * Note: Sensors of type SENSOR_TYPE_PROXIMITY are also wake up sensors and
+ * should be treated as such. Wake-up one-shot sensors like SIGNIFICANT_MOTION
+ * cannot be batched, hence the text about batch above doesn't apply to them.
+ *
+ * Define these sensors only if:
+ * 1) batching is supported.
+ * 2) wake-up and non wake-up variants of each sensor can be activated at
+ *    different rates.
+ *
+ * wake-up sensor: yes
+ * Set SENSOR_FLAG_WAKE_UP flag for all these sensors.
+ */
+#define SENSOR_TYPE_WAKE_UP_ACCELEROMETER                      (23)
+#define SENSOR_STRING_TYPE_WAKE_UP_ACCELEROMETER               "android.sensor.wake_up_accelerometer"
+
+#define SENSOR_TYPE_WAKE_UP_MAGNETIC_FIELD                     (24)
+#define SENSOR_STRING_TYPE_WAKE_UP_MAGNETIC_FIELD              "android.sensor.wake_up_magnetic_field"
+
+#define SENSOR_TYPE_WAKE_UP_ORIENTATION                        (25)
+#define SENSOR_STRING_TYPE_WAKE_UP_ORIENTATION                 "android.sensor.wake_up_orientation"
+
+#define SENSOR_TYPE_WAKE_UP_GYROSCOPE                          (26)
+#define SENSOR_STRING_TYPE_WAKE_UP_GYROSCOPE                   "android.sensor.wake_up_gyroscope"
+
+#define SENSOR_TYPE_WAKE_UP_LIGHT                              (27)
+#define SENSOR_STRING_TYPE_WAKE_UP_LIGHT                       "android.sensor.wake_up_light"
+
+#define SENSOR_TYPE_WAKE_UP_PRESSURE                           (28)
+#define SENSOR_STRING_TYPE_WAKE_UP_PRESSURE                    "android.sensor.wake_up_pressure"
+
+#define SENSOR_TYPE_WAKE_UP_GRAVITY                            (29)
+#define SENSOR_STRING_TYPE_WAKE_UP_GRAVITY                     "android.sensor.wake_up_gravity"
+
+#define SENSOR_TYPE_WAKE_UP_LINEAR_ACCELERATION                (30)
+#define SENSOR_STRING_TYPE_WAKE_UP_LINEAR_ACCELERATION         "android.sensor.wake_up_linear_acceleration"
+
+#define SENSOR_TYPE_WAKE_UP_ROTATION_VECTOR                    (31)
+#define SENSOR_STRING_TYPE_WAKE_UP_ROTATION_VECTOR             "android.sensor.wake_up_rotation_vector"
+
+#define SENSOR_TYPE_WAKE_UP_RELATIVE_HUMIDITY                  (32)
+#define SENSOR_STRING_TYPE_WAKE_UP_RELATIVE_HUMIDITY           "android.sensor.wake_up_relative_humidity"
+
+#define SENSOR_TYPE_WAKE_UP_AMBIENT_TEMPERATURE                (33)
+#define SENSOR_STRING_TYPE_WAKE_UP_AMBIENT_TEMPERATURE         "android.sensor.wake_up_ambient_temperature"
+
+#define SENSOR_TYPE_WAKE_UP_MAGNETIC_FIELD_UNCALIBRATED        (34)
+#define SENSOR_STRING_TYPE_WAKE_UP_MAGNETIC_FIELD_UNCALIBRATED "android.sensor.wake_up_magnetic_field_uncalibrated"
+
+#define SENSOR_TYPE_WAKE_UP_GAME_ROTATION_VECTOR               (35)
+#define SENSOR_STRING_TYPE_WAKE_UP_GAME_ROTATION_VECTOR        "android.sensor.wake_up_game_rotation_vector"
+
+#define SENSOR_TYPE_WAKE_UP_GYROSCOPE_UNCALIBRATED             (36)
+#define SENSOR_STRING_TYPE_WAKE_UP_GYROSCOPE_UNCALIBRATED      "android.sensor.wake_up_gyroscope_uncalibrated"
+
+#define SENSOR_TYPE_WAKE_UP_STEP_DETECTOR                      (37)
+#define SENSOR_STRING_TYPE_WAKE_UP_STEP_DETECTOR               "android.sensor.wake_up_step_detector"
+
+#define SENSOR_TYPE_WAKE_UP_STEP_COUNTER                       (38)
+#define SENSOR_STRING_TYPE_WAKE_UP_STEP_COUNTER                "android.sensor.wake_up_step_counter"
+
+#define SENSOR_TYPE_WAKE_UP_GEOMAGNETIC_ROTATION_VECTOR        (39)
+#define SENSOR_STRING_TYPE_WAKE_UP_GEOMAGNETIC_ROTATION_VECTOR "android.sensor.wake_up_geomagnetic_rotation_vector"
+
+#define SENSOR_TYPE_WAKE_UP_HEART_RATE                         (40)
+#define SENSOR_STRING_TYPE_WAKE_UP_HEART_RATE                  "android.sensor.wake_up_heart_rate"
+
+/*
+ * SENSOR_TYPE_WAKE_UP_TILT_DETECTOR
+ * trigger-mode: special (setDelay has no impact)
+ * wake-up sensor: yes (set SENSOR_FLAG_WAKE_UP flag)
+ *
+ * A sensor of this type generates an event each time a tilt event is detected. A tilt event
+ * should be generated if the direction of the 2-seconds window average gravity changed by at least
+ * 35 degrees since the activation of the sensor.
+ *     initial_estimated_gravity = average of accelerometer measurements over the first
+ *                                 1 second after activation.
+ *     current_estimated_gravity = average of accelerometer measurements over the last 2 seconds.
+ *     trigger when angle (initial_estimated_gravity, current_estimated_gravity) > 35 degrees
+ *
+ * Large accelerations without a change in phone orientation should not trigger a tilt event.
+ * For example, a sharp turn or strong acceleration while driving a car should not trigger a tilt
+ * event, even though the angle of the average acceleration might vary by more than 35 degrees.
+ *
+ * Typically, this sensor is implemented with the help of only an accelerometer. Other sensors can
+ * be used as well if they do not increase the power consumption significantly. This is a low power
+ * sensor that should allow the AP to go into suspend mode. Do not emulate this sensor in the HAL.
+ * Like other wake up sensors, the driver is expected to a hold a wake_lock with a timeout of 200 ms
+ * while reporting this event. The only allowed return value is 1.0.
+ */
+#define SENSOR_TYPE_WAKE_UP_TILT_DETECTOR                      (41)
+#define SENSOR_STRING_TYPE_WAKE_UP_TILT_DETECTOR               "android.sensor.wake_up_tilt_detector"
+
+/*
+ * SENSOR_TYPE_WAKE_GESTURE
+ * trigger-mode: one-shot
+ * wake-up sensor: yes (set SENSOR_FLAG_WAKE_UP flag)
+ *
+ * A sensor enabling waking up the device based on a device specific motion.
+ *
+ * When this sensor triggers, the device behaves as if the power button was
+ * pressed, turning the screen on. This behavior (turning on the screen when
+ * this sensor triggers) might be deactivated by the user in the device
+ * settings. Changes in settings do not impact the behavior of the sensor:
+ * only whether the framework turns the screen on when it triggers.
+ *
+ * The actual gesture to be detected is not specified, and can be chosen by
+ * the manufacturer of the device.
+ * This sensor must be low power, as it is likely to be activated 24/7.
+ * The only allowed value to return is 1.0.
+ */
+#define SENSOR_TYPE_WAKE_GESTURE                               (42)
+#define SENSOR_STRING_TYPE_WAKE_GESTURE                        "android.sensor.wake_gesture"
+
 /**
  * Values returned by the accelerometer in various locations in the universe.
  * all values are in SI units (m/s^2)
@@ -952,7 +700,11 @@
             uint64_t        step_counter;
         } u64;
     };
-    uint32_t reserved1[4];
+
+    /* Reserved flags for internal use. Set to zero. */
+    uint32_t flags;
+
+    uint32_t reserved1[3];
 } sensors_event_t;
 
 
@@ -992,7 +744,7 @@
      * must increase when the driver is updated in a way that changes the
      * output of this sensor. This is important for fused sensors when the
      * fusion algorithm is updated.
-     */    
+     */
     int             version;
 
     /* handle that identifies this sensors. This handle is used to reference
@@ -1053,15 +805,40 @@
      */
     const char*    requiredPermission;
 
+    /* This value is defined only for continuous mode sensors. It is the delay between two
+     * sensor events corresponding to the lowest frequency that this sensor supports. When
+     * lower frequencies are requested through batch()/setDelay() the events will be generated
+     * at this frequency instead. It can be used by the framework or applications to estimate
+     * when the batch FIFO may be full.
+     * NOTE: period_ns is in nanoseconds where as maxDelay/minDelay are in microseconds.
+     *     continuous: maximum sampling period allowed in microseconds.
+     *     on-change, one-shot, special : -1
+     * Availability: SENSORS_DEVICE_API_VERSION_1_3
+     */
+    #ifdef __LP64__
+       int64_t maxDelay;
+    #else
+       int32_t maxDelay;
+    #endif
+
+    /* Flags for sensor. See SENSOR_FLAG_* above. */
+    #ifdef __LP64__
+       uint64_t flags;
+    #else
+       uint32_t flags;
+    #endif
+
     /* reserved fields, must be zero */
-    void*           reserved[4];
+    void*           reserved[2];
 };
 
 
 /*
  * sensors_poll_device_t is used with SENSORS_DEVICE_API_VERSION_0_1
  * and is present for backward binary and source compatibility.
- * (see documentation of the hooks in struct sensors_poll_device_1 below)
+ * See the Sensors HAL interface section for complete descriptions of the
+ * following functions:
+ * http://source.android.com/devices/sensors/index.html#hal
  */
 struct sensors_poll_device_t {
     struct hw_device_t common;
@@ -1086,70 +863,26 @@
         struct {
             struct hw_device_t common;
 
-            /* Activate/de-activate one sensor.
+            /* Activate/de-activate one sensor. Return 0 on success, negative
              *
              * handle is the handle of the sensor to change.
              * enabled set to 1 to enable, or 0 to disable the sensor.
              *
-             * if enabled is set to 1, the sensor is activated even if
-             * setDelay() wasn't called before. In this case, a default rate
-             * should be used.
-             *
-             * unless otherwise noted in the sensor types definitions, an
-             * activated sensor never prevents the SoC to go into suspend
-             * mode; that is, the HAL shall not hold a partial wake-lock on
-             * behalf of applications.
-             *
-             * one-shot sensors de-activate themselves automatically upon
-             * receiving an event and they must still accept to be deactivated
-             * through a call to activate(..., ..., 0).
-             *
-             * if "enabled" is 1 and the sensor is already activated, this
-             * function is a no-op and succeeds.
-             *
-             * if "enabled" is 0 and the sensor is already de-activated,
-             * this function is a no-op and succeeds.
-             *
-             * return 0 on success, negative errno code otherwise
+             * Return 0 on success, negative errno code otherwise.
              */
             int (*activate)(struct sensors_poll_device_t *dev,
                     int handle, int enabled);
 
             /**
-             * Set the events's period in nanoseconds for a given sensor.
-             *
-             * What the period_ns parameter means depends on the specified
-             * sensor's trigger mode:
-             *
-             * continuous: setDelay() sets the sampling rate.
-             * on-change: setDelay() limits the delivery rate of events
-             * one-shot: setDelay() is ignored. it has no effect.
-             * special: see specific sensor type definitions
-             *
-             * For continuous and on-change sensors, if the requested value is
-             * less than sensor_t::minDelay, then it's silently clamped to
-             * sensor_t::minDelay unless sensor_t::minDelay is 0, in which
-             * case it is clamped to >= 1ms.
-             *
-             * setDelay will not be called when the sensor is in batching mode.
-             * In this case, batch() will be called with the new period.
-             *
-             * @return 0 if successful, < 0 on error
+             * Set the events's period in nanoseconds for a given sensor. If
+             * period_ns > max_delay it will be truncated to max_delay and if
+             * period_ns < min_delay it will be replaced by min_delay.
              */
             int (*setDelay)(struct sensors_poll_device_t *dev,
                     int handle, int64_t period_ns);
 
             /**
              * Returns an array of sensor data.
-             * This function must block until events are available.
-             *
-             * return the number of events read on success, or -errno in case
-             * of an error.
-             *
-             * The number of events returned in data must be less or equal
-             * to the "count" argument.
-             *
-             * This function shall never return 0 (no event).
              */
             int (*poll)(struct sensors_poll_device_t *dev,
                     sensors_event_t* data, int count);
@@ -1158,200 +891,9 @@
 
 
     /*
-     * Enables batch mode for the given sensor and sets the delay between events
-     *
-     * A timeout value of zero disables batch mode for the given sensor.
-     *
-     * The period_ns parameter is equivalent to calling setDelay() -- this
-     * function both enables or disables the batch mode AND sets the events's
-     * period in nanosecond. See setDelay() above for a detailed explanation of
-     * the period_ns parameter.
-     *
-     * BATCH MODE:
-     * -----------
-     * In non-batch mode, all sensor events must be reported as soon as they
-     * are detected. For example, an accelerometer activated at 50Hz will
-     * trigger interrupts 50 times per second.
-     * While in batch mode, sensor events do not need to be reported as soon
-     * as they are detected. They can be temporarily stored in batches and
-     * reported in batches, as long as no event is delayed by more than
-     * "timeout" nanoseconds. That is, all events since the previous batch
-     * are recorded and returned all at once. This allows to reduce the amount
-     * of interrupts sent to the SoC, and allow the SoC to switch to a lower
-     * power state (Idle) while the sensor is capturing and batching data.
-     *
-     * setDelay() is not affected and it behaves as usual.
-     *
-     * Each event has a timestamp associated with it, the timestamp
-     * must be accurate and correspond to the time at which the event
-     * physically happened.
-     *
-     * Batching does not modify the behavior of poll(): batches from different
-     * sensors can be interleaved and split. As usual, all events from the same
-     * sensor are time-ordered.
-     *
-     * BEHAVIOUR OUTSIDE OF SUSPEND MODE:
-     * ----------------------------------
-     *
-     * When the SoC is awake (not in suspend mode), events must be reported in
-     * batches at least every "timeout". No event shall be dropped or lost.
-     * If internal h/w FIFOs fill-up before the timeout, then events are
-     * reported at that point to ensure no event is lost.
-     *
-     *
-     * NORMAL BEHAVIOR IN SUSPEND MODE:
-     * ---------------------------------
-     *
-     * By default, batch mode doesn't significantly change the interaction with
-     * suspend mode. That is, sensors must continue to allow the SoC to
-     * go into suspend mode and sensors must stay active to fill their
-     * internal FIFO. In this mode, when the FIFO fills up, it shall wrap
-     * around (basically behave like a circular buffer, overwriting events).
-     * As soon as the SoC comes out of suspend mode, a batch is produced with
-     * as much as the recent history as possible, and batch operation
-     * resumes as usual.
-     *
-     * The behavior described above allows applications to record the recent
-     * history of a set of sensor while keeping the SoC into suspend. It
-     * also allows the hardware to not have to rely on a wake-up interrupt line.
-     *
-     * WAKE_UPON_FIFO_FULL BEHAVIOR IN SUSPEND MODE:
-     * ----------------------------------------------
-     *
-     * There are cases, however, where an application cannot afford to lose
-     * any events, even when the device goes into suspend mode.
-     * For a given rate, if a sensor has the capability to store at least 10
-     * seconds worth of events in its FIFO and is able to wake up the Soc, it
-     * can implement an optional secondary mode: the WAKE_UPON_FIFO_FULL mode.
-     *
-     * The caller will set the SENSORS_BATCH_WAKE_UPON_FIFO_FULL flag to
-     * activate this mode. If the sensor does not support this mode, batch()
-     * will fail when the flag is set.
-     *
-     * When running with the WAKE_UPON_FIFO_FULL flag set, no events can be
-     * lost. When the FIFO is getting full, the sensor must wake up the SoC from
-     * suspend and return a batch before the FIFO fills-up.
-     * Depending on the device, it might take a few miliseconds for the SoC to
-     * entirely come out of suspend and start flushing the FIFO. Enough head
-     * room must be allocated in the FIFO to allow the device to entirely come
-     * out of suspend without the FIFO overflowing (no events shall be lost).
-     *
-     *   Implementing the WAKE_UPON_FIFO_FULL mode is optional.
-     *   If the hardware cannot support this mode, or if the physical
-     *   FIFO is so small that the device would never be allowed to go into
-     *   suspend for at least 10 seconds, then this function MUST fail when
-     *   the flag SENSORS_BATCH_WAKE_UPON_FIFO_FULL is set, regardless of
-     *   the value of the timeout parameter.
-     *
-     *
-     * DRY RUN:
-     * --------
-     *
-     * If the flag SENSORS_BATCH_DRY_RUN is set, this function returns
-     * without modifying the batch mode or the event period and has no side
-     * effects, but returns errors as usual (as it would if this flag was
-     * not set). This flag is used to check if batch mode is available for a
-     * given configuration -- in particular for a given sensor at a given rate.
-     *
-     *
-     * Return values:
-     * --------------
-     *
-     * Because sensors must be independent, the return value must not depend
-     * on the state of the system (whether another sensor is on or not),
-     * nor on whether the flag SENSORS_BATCH_DRY_RUN is set (in other words,
-     * if a batch call with SENSORS_BATCH_DRY_RUN is successful,
-     * the same call without SENSORS_BATCH_DRY_RUN must succeed as well).
-     *
-     * When timeout is not 0:
-     *   If successful, 0 is returned.
-     *   If the specified sensor doesn't support batch mode, return -EINVAL.
-     *   If the specified sensor's trigger-mode is one-shot, return -EINVAL.
-     *   If WAKE_UPON_FIFO_FULL is specified and the specified sensor's internal
-     *   FIFO is too small to store at least 10 seconds worth of data at the
-     *   given rate, -EINVAL is returned. Note that as stated above, this has to
-     *   be determined at compile time, and not based on the state of the
-     *   system.
-     *   If some other constraints above cannot be satisfied, return -EINVAL.
-     *
-     * Note: the timeout parameter, when > 0, has no impact on whether this
-     *       function succeeds or fails.
-     *
-     * When timeout is 0:
-     *   The caller will never set the wake_upon_fifo_full flag.
-     *   The function must succeed, and batch mode must be deactivated.
-     *
-     * Independently of whether DRY_RUN is specified, When the call to batch()
-     * fails, no state should be changed. In particular, a failed call to
-     * batch() should not change the rate of the sensor. Example:
-     *   setDelay(..., 10ms)
-     *   batch(..., 20ms, ...) fails
-     *   rate should stay 10ms.
-     *
-     *
-     * IMPLEMENTATION NOTES:
-     * ---------------------
-     *
-     * Batch mode, if supported, should happen at the hardware level,
-     * typically using hardware FIFOs. In particular, it SHALL NOT be
-     * implemented in the HAL, as this would be counter productive.
-     * The goal here is to save significant amounts of power.
-     *
-     * In some implementations, events from several sensors can share the
-     * same physical FIFO. In that case, all events in the FIFO can be sent and
-     * processed by the HAL as soon as one batch must be reported.
-     * For example, if the following sensors are activated:
-     *  - accelerometer batched with timeout = 20s
-     *  - gyroscope batched with timeout = 5s
-     * then the accelerometer batches can be reported at the same time the
-     * gyroscope batches are reported (every 5 seconds)
-     *
-     * Batch mode can be enabled or disabled at any time, in particular
-     * while the specified sensor is already enabled, and this shall not
-     * result in the loss of events.
-     *
-     * COMPARATIVE IMPORTANCE OF BATCHING FOR DIFFERENT SENSORS:
-     * ---------------------------------------------------------
-     *
-     * On platforms on which hardware fifo size is limited, the system designers
-     * might have to choose how much fifo to reserve for each sensor. To help
-     * with this choice, here is a list of applications made possible when
-     * batching is implemented on the different sensors.
-     *
-     * High value: Low power pedestrian dead reckoning
-     *   Target batching time: 20 seconds to 1 minute
-     *   Sensors to batch:
-     *    - Step detector
-     *    - Rotation vector or game rotation vector at 5Hz
-     *   Gives us step and heading while letting the SoC go to Suspend.
-     *
-     * High value: Medium power activity/gesture recognition
-     *   Target batching time: 3 seconds
-     *   Sensors to batch: accelerometer between 20Hz and 50Hz
-     *   Allows recognizing arbitrary activities and gestures without having
-     *   to keep the SoC fully awake while the data is collected.
-     *
-     * Medium-high value: Interrupt load reduction
-     *   Target batching time: < 1 second
-     *   Sensors to batch: any high frequency sensor.
-     *   If the gyroscope is set at 800Hz, even batching just 10 gyro events can
-     *   reduce the number of interrupts from 800/second to 80/second.
-     *
-     * Medium value: Continuous low frequency data collection
-     *   Target batching time: > 1 minute
-     *   Sensors to batch: barometer, humidity sensor, other low frequency
-     *     sensors.
-     *   Allows creating monitoring applications at low power.
-     *
-     * Medium value: Continuous full-sensors collection
-     *   Target batching time: > 1 minute
-     *   Sensors to batch: all, at high frequencies
-     *   Allows full collection of sensor data while leaving the SoC in
-     *   suspend mode. Only to consider if fifo space is not an issue.
-     *
-     * In each of the cases above, if WAKE_UPON_FIFO_FULL is implemented, the
-     * applications might decide to let the SoC go to suspend, allowing for even
-     * more power savings.
+     * Enables batch mode for the given sensor and sets the delay between events.
+     * See the Batching sensor results page for details:
+     * http://source.android.com/devices/sensors/batching.html
      */
     int (*batch)(struct sensors_poll_device_1* dev,
             int handle, int flags, int64_t period_ns, int64_t timeout);
@@ -1359,29 +901,7 @@
     /*
      * Flush adds a META_DATA_FLUSH_COMPLETE event (sensors_event_meta_data_t)
      * to the end of the "batch mode" FIFO for the specified sensor and flushes
-     * the FIFO; those events are delivered as usual (i.e.: as if the batch
-     * timeout had expired) and removed from the FIFO.
-     *
-     * See the META_DATA_FLUSH_COMPLETE section for details about the
-     * META_DATA_FLUSH_COMPLETE event.
-     *
-     * The flush happens asynchronously (i.e.: this function must return
-     * immediately).
-     *
-     * If the implementation uses a single FIFO for several sensors, that
-     * FIFO is flushed and the META_DATA_FLUSH_COMPLETE event is added only
-     * for the specified sensor.
-     *
-     * If the specified sensor wasn't in batch mode, flush succeeds and
-     * promptly sends a META_DATA_FLUSH_COMPLETE event for that sensor.
-     *
-     * If the FIFO was empty at the time of the call, flush returns
-     * 0 (success) and promptly sends a META_DATA_FLUSH_COMPLETE event
-     * for that sensor.
-     *
-     * If the specified sensor wasn't enabled, flush returns -EINVAL.
-     *
-     * return 0 on success, negative errno code otherwise.
+     * the FIFO.
      */
     int (*flush)(struct sensors_poll_device_1* dev, int handle);
 
diff --git a/include/hardware/tv_input.h b/include/hardware/tv_input.h
new file mode 100644
index 0000000..f2d03f1
--- /dev/null
+++ b/include/hardware/tv_input.h
@@ -0,0 +1,333 @@
+/*
+ * Copyright 2014 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef ANDROID_TV_INPUT_INTERFACE_H
+#define ANDROID_TV_INPUT_INTERFACE_H
+
+#include <stdint.h>
+#include <sys/cdefs.h>
+#include <sys/types.h>
+
+#include <hardware/hardware.h>
+#include <system/window.h>
+
+__BEGIN_DECLS
+
+/*
+ * Module versioning information for the TV input hardware module, based on
+ * tv_input_module_t.common.module_api_version.
+ *
+ * Version History:
+ *
+ * TV_INPUT_MODULE_API_VERSION_0_1:
+ * Initial TV input hardware module API.
+ *
+ */
+
+#define TV_INPUT_MODULE_API_VERSION_0_1  HARDWARE_MODULE_API_VERSION(0, 1)
+
+#define TV_INPUT_DEVICE_API_VERSION_0_1  HARDWARE_DEVICE_API_VERSION(0, 1)
+
+/*
+ * The id of this module
+ */
+#define TV_INPUT_HARDWARE_MODULE_ID "tv_input"
+
+#define TV_INPUT_DEFAULT_DEVICE "default"
+
+/*****************************************************************************/
+
+/*
+ * Every hardware module must have a data structure named HAL_MODULE_INFO_SYM
+ * and the fields of this data structure must begin with hw_module_t
+ * followed by module specific information.
+ */
+typedef struct tv_input_module {
+    struct hw_module_t common;
+} tv_input_module_t;
+
+/*****************************************************************************/
+
+typedef enum tv_input_type {
+    /* HDMI */
+    TV_INPUT_TYPE_HDMI = 1,
+
+    /* Built-in tuners. */
+    TV_INPUT_TYPE_BUILT_IN_TUNER = 2,
+
+    /* Passthrough */
+    TV_INPUT_TYPE_PASSTHROUGH = 3,
+} tv_input_type_t;
+
+typedef struct tv_input_device_info {
+    /* Device ID */
+    int device_id;
+
+    /* Type of physical TV input. */
+    tv_input_type_t type;
+
+    /*
+     * TODO: A union of type specific information. For example, HDMI port
+     * identifier that HDMI hardware understands.
+     */
+
+    /* TODO: Add capability if necessary. */
+
+    /* TODO: Audio info */
+} tv_input_device_info_t;
+
+typedef enum {
+    /*
+     * Hardware notifies the framework that a device is available.
+     */
+    TV_INPUT_EVENT_DEVICE_AVAILABLE = 1,
+    /*
+     * Hardware notifies the framework that a device is unavailable.
+     */
+    TV_INPUT_EVENT_DEVICE_UNAVAILABLE = 2,
+    /*
+     * Stream configurations are changed. Client should regard all open streams
+     * at the specific device are closed, and should call
+     * get_stream_configurations() again, opening some of them if necessary.
+     */
+    TV_INPUT_EVENT_STREAM_CONFIGURATIONS_CHANGED = 3,
+    /*
+     * Hardware is done with capture request with the buffer. Client can assume
+     * ownership of the buffer again.
+     */
+    TV_INPUT_EVENT_CAPTURE_SUCCEEDED = 4,
+    /*
+     * Hardware met a failure while processing a capture request or client
+     * canceled the request. Client can assume ownership of the buffer again.
+     */
+    TV_INPUT_EVENT_CAPTURE_FAILED = 5,
+} tv_input_event_type_t;
+
+typedef struct tv_input_capture_result {
+    /* Device ID */
+    int device_id;
+
+    /* Stream ID */
+    int stream_id;
+
+    /* Sequence number of the request */
+    uint32_t seq;
+
+    /*
+     * The buffer passed to hardware in request_capture(). The content of
+     * buffer is undefined (although buffer itself is valid) for
+     * TV_INPUT_CAPTURE_FAILED event.
+     */
+    buffer_handle_t buffer;
+
+    /*
+     * Error code for the request. -ECANCELED if request is cancelled; other
+     * error codes are unknown errors.
+     */
+    int error_code;
+} tv_input_capture_result_t;
+
+typedef struct tv_input_event {
+    tv_input_event_type_t type;
+
+    union {
+        /*
+         * TV_INPUT_EVENT_DEVICE_AVAILABLE: all fields are relevant
+         * TV_INPUT_EVENT_DEVICE_UNAVAILABLE: only device_id is relevant
+         * TV_INPUT_EVENT_STREAM_CONFIGURATIONS_CHANGED: only device_id is
+         *    relevant
+         */
+        tv_input_device_info_t device_info;
+        /*
+         * TV_INPUT_EVENT_CAPTURE_SUCCEEDED: error_code is not relevant
+         * TV_INPUT_EVENT_CAPTURE_FAILED: all fields are relevant
+         */
+        tv_input_capture_result_t capture_result;
+    };
+} tv_input_event_t;
+
+typedef struct tv_input_callback_ops {
+    /*
+     * event contains the type of the event and additional data if necessary.
+     * The event object is guaranteed to be valid only for the duration of the
+     * call.
+     *
+     * data is an object supplied at device initialization, opaque to the
+     * hardware.
+     */
+    void (*notify)(struct tv_input_device* dev,
+            tv_input_event_t* event, void* data);
+} tv_input_callback_ops_t;
+
+typedef enum {
+    TV_STREAM_TYPE_INDEPENDENT_VIDEO_SOURCE = 1,
+    TV_STREAM_TYPE_BUFFER_PRODUCER = 2,
+} tv_stream_type_t;
+
+typedef struct tv_stream_config {
+    /*
+     * ID number of the stream. This value is used to identify the whole stream
+     * configuration.
+     */
+    int stream_id;
+
+    /* Type of the stream */
+    tv_stream_type_t type;
+
+    /* Max width/height of the stream. */
+    uint32_t max_video_width;
+    uint32_t max_video_height;
+} tv_stream_config_t;
+
+typedef struct buffer_producer_stream {
+    /*
+     * IN/OUT: Width / height of the stream. Client may request for specific
+     * size but hardware may change it. Client must allocate buffers with
+     * specified width and height.
+     */
+    uint32_t width;
+    uint32_t height;
+
+    /* OUT: Client must set this usage when allocating buffer. */
+    uint32_t usage;
+
+    /* OUT: Client must allocate a buffer with this format. */
+    uint32_t format;
+} buffer_producer_stream_t;
+
+typedef struct tv_stream {
+    /* IN: ID in the stream configuration */
+    int stream_id;
+
+    /* OUT: Type of the stream (for convenience) */
+    tv_stream_type_t type;
+
+    /* Data associated with the stream for client's use */
+    union {
+        /* OUT: A native handle describing the sideband stream source */
+        native_handle_t* sideband_stream_source_handle;
+
+        /* IN/OUT: Details are in buffer_producer_stream_t */
+        buffer_producer_stream_t buffer_producer;
+    };
+} tv_stream_t;
+
+/*
+ * Every device data structure must begin with hw_device_t
+ * followed by module specific public methods and attributes.
+ */
+typedef struct tv_input_device {
+    struct hw_device_t common;
+
+    /*
+     * initialize:
+     *
+     * Provide callbacks to the device and start operation. At first, no device
+     * is available and after initialize() completes, currently available
+     * devices including static devices should notify via callback.
+     *
+     * Framework owns callbacks object.
+     *
+     * data is a framework-owned object which would be sent back to the
+     * framework for each callback notifications.
+     *
+     * Return 0 on success.
+     */
+    int (*initialize)(struct tv_input_device* dev,
+            const tv_input_callback_ops_t* callback, void* data);
+
+    /*
+     * get_stream_configurations:
+     *
+     * Get stream configurations for a specific device. An input device may have
+     * multiple configurations.
+     *
+     * The configs object is guaranteed to be valid only until the next call to
+     * get_stream_configurations() or STREAM_CONFIGURATIONS_CHANGED event.
+     *
+     * Return 0 on success.
+     */
+    int (*get_stream_configurations)(const struct tv_input_device* dev,
+            int device_id, int* num_configurations,
+            const tv_stream_config_t** configs);
+
+    /*
+     * open_stream:
+     *
+     * Open a stream with given stream ID. Caller owns stream object, and the
+     * populated data is only valid until the stream is closed.
+     *
+     * Return 0 on success; -EBUSY if the client should close other streams to
+     * open the stream; -EEXIST if the stream with the given ID is already open;
+     * -EINVAL if device_id and/or stream_id are invalid; other non-zero value
+     * denotes unknown error.
+     */
+    int (*open_stream)(struct tv_input_device* dev, int device_id,
+            tv_stream_t* stream);
+
+    /*
+     * close_stream:
+     *
+     * Close a stream to a device. data in tv_stream_t* object associated with
+     * the stream_id is obsolete once this call finishes.
+     *
+     * Return 0 on success; -ENOENT if the stream is not open; -EINVAL if
+     * device_id and/or stream_id are invalid.
+     */
+    int (*close_stream)(struct tv_input_device* dev, int device_id,
+            int stream_id);
+
+    /*
+     * request_capture:
+     *
+     * Request buffer capture for a stream. This is only valid for buffer
+     * producer streams. The buffer should be created with size, format and
+     * usage specified in the stream. Framework provides seq in an
+     * increasing sequence per each stream. Hardware should provide the picture
+     * in a chronological order according to seq. For example, if two
+     * requests are being processed at the same time, the request with the
+     * smaller seq should get an earlier frame.
+     *
+     * The framework releases the ownership of the buffer upon calling this
+     * function. When the buffer is filled, hardware notifies the framework
+     * via TV_INPUT_EVENT_CAPTURE_FINISHED callback, and the ownership is
+     * transferred back to framework at that time.
+     *
+     * Return 0 on success; -ENOENT if the stream is not open; -EINVAL if
+     * device_id and/or stream_id are invalid; -EWOULDBLOCK if HAL cannot take
+     * additional requests until it releases a buffer.
+     */
+    int (*request_capture)(struct tv_input_device* dev, int device_id,
+            int stream_id, buffer_handle_t buffer, uint32_t seq);
+
+    /*
+     * cancel_capture:
+     *
+     * Cancel an ongoing capture. Hardware should release the buffer as soon as
+     * possible via TV_INPUT_EVENT_CAPTURE_FAILED callback.
+     *
+     * Return 0 on success; -ENOENT if the stream is not open; -EINVAL if
+     * device_id, stream_id, and/or seq are invalid.
+     */
+    int (*cancel_capture)(struct tv_input_device* dev, int device_id,
+            int stream_id, uint32_t seq);
+
+    void* reserved[16];
+} tv_input_device_t;
+
+__END_DECLS
+
+#endif  // ANDROID_TV_INPUT_INTERFACE_H
diff --git a/modules/Android.mk b/modules/Android.mk
index f1a6c1c..c903eee 100644
--- a/modules/Android.mk
+++ b/modules/Android.mk
@@ -1,4 +1,4 @@
 hardware_modules := gralloc hwcomposer audio nfc nfc-nci local_time \
 	power usbaudio audio_remote_submix camera consumerir sensors vibrator \
-	mcu
+	mcu tv_input fingerprint
 include $(call all-named-subdir-makefiles,$(hardware_modules))
diff --git a/modules/audio_remote_submix/audio_hw.cpp b/modules/audio_remote_submix/audio_hw.cpp
index 433ef6c..22e2dbf 100644
--- a/modules/audio_remote_submix/audio_hw.cpp
+++ b/modules/audio_remote_submix/audio_hw.cpp
@@ -566,7 +566,8 @@
     // initialize pipe
     {
         ALOGV("  initializing pipe");
-        const NBAIO_Format format = Format_from_SR_C(config->sample_rate, 2);
+        const NBAIO_Format format = Format_from_SR_C(config->sample_rate,
+                popcount(config->channel_mask), config->format);
         const NBAIO_Format offers[1] = {format};
         size_t numCounterOffers = 0;
         // creating a MonoPipe with optional blocking set to true.
diff --git a/modules/camera/Android.mk b/modules/camera/Android.mk
index fbe44c5..ae68ed5 100644
--- a/modules/camera/Android.mk
+++ b/modules/camera/Android.mk
@@ -26,14 +26,17 @@
 LOCAL_SRC_FILES := \
 	CameraHAL.cpp \
 	Camera.cpp \
+	ExampleCamera.cpp \
 	Metadata.cpp \
 	Stream.cpp \
+	VendorTags.cpp \
 
 LOCAL_SHARED_LIBRARIES := \
 	libcamera_metadata \
 	libcutils \
 	liblog \
 	libsync \
+	libutils \
 
 LOCAL_CFLAGS += -Wall -Wextra -fvisibility=hidden
 
diff --git a/modules/camera/Camera.cpp b/modules/camera/Camera.cpp
index 973380e..1f22e00 100644
--- a/modules/camera/Camera.cpp
+++ b/modules/camera/Camera.cpp
@@ -15,11 +15,12 @@
  */
 
 #include <cstdlib>
-#include <pthread.h>
+#include <stdio.h>
 #include <hardware/camera3.h>
 #include <sync/sync.h>
 #include <system/camera_metadata.h>
 #include <system/graphics.h>
+#include <utils/Mutex.h>
 #include "CameraHAL.h"
 #include "Metadata.h"
 #include "Stream.h"
@@ -29,15 +30,12 @@
 #include <cutils/log.h>
 
 #define ATRACE_TAG (ATRACE_TAG_CAMERA | ATRACE_TAG_HAL)
-#include <cutils/trace.h>
-#include "ScopedTrace.h"
+#include <utils/Trace.h>
 
 #include "Camera.h"
 
 #define CAMERA_SYNC_TIMEOUT 5000 // in msecs
 
-#define ARRAY_SIZE(a) (sizeof(a) / sizeof(a[0]))
-
 namespace default_camera_hal {
 
 extern "C" {
@@ -59,9 +57,7 @@
     mNumStreams(0),
     mSettings(NULL)
 {
-    pthread_mutex_init(&mMutex, NULL);
-    pthread_mutex_init(&mStaticInfoMutex, NULL);
-
+    memset(&mTemplates, 0, sizeof(mTemplates));
     memset(&mDevice, 0, sizeof(mDevice));
     mDevice.common.tag    = HARDWARE_DEVICE_TAG;
     mDevice.common.version = CAMERA_DEVICE_API_VERSION_3_0;
@@ -72,17 +68,18 @@
 
 Camera::~Camera()
 {
-    pthread_mutex_destroy(&mMutex);
-    pthread_mutex_destroy(&mStaticInfoMutex);
+    if (mStaticInfo != NULL) {
+        free_camera_metadata(mStaticInfo);
+    }
 }
 
 int Camera::open(const hw_module_t *module, hw_device_t **device)
 {
     ALOGI("%s:%d: Opening camera device", __func__, mId);
-    CAMTRACE_CALL();
-    pthread_mutex_lock(&mMutex);
+    ATRACE_CALL();
+    android::Mutex::Autolock al(mDeviceLock);
+
     if (mBusy) {
-        pthread_mutex_unlock(&mMutex);
         ALOGE("%s:%d: Error! Camera device already opened", __func__, mId);
         return -EBUSY;
     }
@@ -91,217 +88,62 @@
     mBusy = true;
     mDevice.common.module = const_cast<hw_module_t*>(module);
     *device = &mDevice.common;
-
-    pthread_mutex_unlock(&mMutex);
     return 0;
 }
 
 int Camera::getInfo(struct camera_info *info)
 {
+    android::Mutex::Autolock al(mStaticInfoLock);
+
     info->facing = CAMERA_FACING_FRONT;
     info->orientation = 0;
     info->device_version = mDevice.common.version;
-
-    pthread_mutex_lock(&mStaticInfoMutex);
     if (mStaticInfo == NULL) {
         mStaticInfo = initStaticInfo();
     }
-    pthread_mutex_unlock(&mStaticInfoMutex);
-
     info->static_camera_characteristics = mStaticInfo;
-
     return 0;
 }
 
 int Camera::close()
 {
     ALOGI("%s:%d: Closing camera device", __func__, mId);
-    CAMTRACE_CALL();
-    pthread_mutex_lock(&mMutex);
+    ATRACE_CALL();
+    android::Mutex::Autolock al(mDeviceLock);
+
     if (!mBusy) {
-        pthread_mutex_unlock(&mMutex);
         ALOGE("%s:%d: Error! Camera device not open", __func__, mId);
         return -EINVAL;
     }
 
     // TODO: close camera dev nodes, etc
     mBusy = false;
-
-    pthread_mutex_unlock(&mMutex);
     return 0;
 }
 
 int Camera::initialize(const camera3_callback_ops_t *callback_ops)
 {
+    int res;
+
     ALOGV("%s:%d: callback_ops=%p", __func__, mId, callback_ops);
     mCallbackOps = callback_ops;
-    // Create standard settings templates
-    // 0 is invalid as template
-    mTemplates[0] = NULL;
-    // CAMERA3_TEMPLATE_PREVIEW = 1
-    mTemplates[1] = new Metadata(ANDROID_CONTROL_MODE_OFF,
-            ANDROID_CONTROL_CAPTURE_INTENT_PREVIEW);
-    // CAMERA3_TEMPLATE_STILL_CAPTURE = 2
-    mTemplates[2] = new Metadata(ANDROID_CONTROL_MODE_OFF,
-            ANDROID_CONTROL_CAPTURE_INTENT_STILL_CAPTURE);
-    // CAMERA3_TEMPLATE_VIDEO_RECORD = 3
-    mTemplates[3] = new Metadata(ANDROID_CONTROL_MODE_OFF,
-            ANDROID_CONTROL_CAPTURE_INTENT_VIDEO_RECORD);
-    // CAMERA3_TEMPLATE_VIDEO_SNAPSHOT = 4
-    mTemplates[4] = new Metadata(ANDROID_CONTROL_MODE_OFF,
-            ANDROID_CONTROL_CAPTURE_INTENT_VIDEO_SNAPSHOT);
-    // CAMERA3_TEMPLATE_STILL_ZERO_SHUTTER_LAG = 5
-    mTemplates[5] = new Metadata(ANDROID_CONTROL_MODE_OFF,
-            ANDROID_CONTROL_CAPTURE_INTENT_ZERO_SHUTTER_LAG);
-    // Pre-generate metadata structures
-    for (int i = 1; i < CAMERA3_TEMPLATE_COUNT; i++) {
-        mTemplates[i]->generate();
+    // per-device specific initialization
+    res = initDevice();
+    if (res != 0) {
+        ALOGE("%s:%d: Failed to initialize device!", __func__, mId);
+        return res;
     }
-    // TODO: create vendor templates
     return 0;
 }
 
-camera_metadata_t *Camera::initStaticInfo()
-{
-    /*
-     * Setup static camera info.  This will have to customized per camera
-     * device.
-     */
-    Metadata m;
-
-    /* android.control */
-    int32_t android_control_ae_available_target_fps_ranges[] = {30, 30};
-    m.addInt32(ANDROID_CONTROL_AE_AVAILABLE_TARGET_FPS_RANGES,
-            ARRAY_SIZE(android_control_ae_available_target_fps_ranges),
-            android_control_ae_available_target_fps_ranges);
-
-    int32_t android_control_ae_compensation_range[] = {-4, 4};
-    m.addInt32(ANDROID_CONTROL_AE_COMPENSATION_RANGE,
-            ARRAY_SIZE(android_control_ae_compensation_range),
-            android_control_ae_compensation_range);
-
-    camera_metadata_rational_t android_control_ae_compensation_step[] = {{2,1}};
-    m.addRational(ANDROID_CONTROL_AE_COMPENSATION_STEP,
-            ARRAY_SIZE(android_control_ae_compensation_step),
-            android_control_ae_compensation_step);
-
-    int32_t android_control_max_regions[] = {1};
-    m.addInt32(ANDROID_CONTROL_MAX_REGIONS,
-            ARRAY_SIZE(android_control_max_regions),
-            android_control_max_regions);
-
-    /* android.jpeg */
-    int32_t android_jpeg_available_thumbnail_sizes[] = {0, 0, 128, 96};
-    m.addInt32(ANDROID_JPEG_AVAILABLE_THUMBNAIL_SIZES,
-            ARRAY_SIZE(android_jpeg_available_thumbnail_sizes),
-            android_jpeg_available_thumbnail_sizes);
-
-    /* android.lens */
-    float android_lens_info_available_focal_lengths[] = {1.0};
-    m.addFloat(ANDROID_LENS_INFO_AVAILABLE_FOCAL_LENGTHS,
-            ARRAY_SIZE(android_lens_info_available_focal_lengths),
-            android_lens_info_available_focal_lengths);
-
-    /* android.request */
-    int32_t android_request_max_num_output_streams[] = {0, 3, 1};
-    m.addInt32(ANDROID_REQUEST_MAX_NUM_OUTPUT_STREAMS,
-            ARRAY_SIZE(android_request_max_num_output_streams),
-            android_request_max_num_output_streams);
-
-    /* android.scaler */
-    int32_t android_scaler_available_formats[] = {
-            HAL_PIXEL_FORMAT_RAW_SENSOR,
-            HAL_PIXEL_FORMAT_BLOB,
-            HAL_PIXEL_FORMAT_RGBA_8888,
-            HAL_PIXEL_FORMAT_IMPLEMENTATION_DEFINED,
-            // These are handled by YCbCr_420_888
-            //        HAL_PIXEL_FORMAT_YV12,
-            //        HAL_PIXEL_FORMAT_YCrCb_420_SP,
-            HAL_PIXEL_FORMAT_YCbCr_420_888};
-    m.addInt32(ANDROID_SCALER_AVAILABLE_FORMATS,
-            ARRAY_SIZE(android_scaler_available_formats),
-            android_scaler_available_formats);
-
-    int64_t android_scaler_available_jpeg_min_durations[] = {1};
-    m.addInt64(ANDROID_SCALER_AVAILABLE_JPEG_MIN_DURATIONS,
-            ARRAY_SIZE(android_scaler_available_jpeg_min_durations),
-            android_scaler_available_jpeg_min_durations);
-
-    int32_t android_scaler_available_jpeg_sizes[] = {640, 480};
-    m.addInt32(ANDROID_SCALER_AVAILABLE_JPEG_SIZES,
-            ARRAY_SIZE(android_scaler_available_jpeg_sizes),
-            android_scaler_available_jpeg_sizes);
-
-    float android_scaler_available_max_digital_zoom[] = {1};
-    m.addFloat(ANDROID_SCALER_AVAILABLE_MAX_DIGITAL_ZOOM,
-            ARRAY_SIZE(android_scaler_available_max_digital_zoom),
-            android_scaler_available_max_digital_zoom);
-
-    int64_t android_scaler_available_processed_min_durations[] = {1};
-    m.addInt64(ANDROID_SCALER_AVAILABLE_PROCESSED_MIN_DURATIONS,
-            ARRAY_SIZE(android_scaler_available_processed_min_durations),
-            android_scaler_available_processed_min_durations);
-
-    int32_t android_scaler_available_processed_sizes[] = {640, 480};
-    m.addInt32(ANDROID_SCALER_AVAILABLE_PROCESSED_SIZES,
-            ARRAY_SIZE(android_scaler_available_processed_sizes),
-            android_scaler_available_processed_sizes);
-
-    int64_t android_scaler_available_raw_min_durations[] = {1};
-    m.addInt64(ANDROID_SCALER_AVAILABLE_RAW_MIN_DURATIONS,
-            ARRAY_SIZE(android_scaler_available_raw_min_durations),
-            android_scaler_available_raw_min_durations);
-
-    int32_t android_scaler_available_raw_sizes[] = {640, 480};
-    m.addInt32(ANDROID_SCALER_AVAILABLE_RAW_SIZES,
-            ARRAY_SIZE(android_scaler_available_raw_sizes),
-            android_scaler_available_raw_sizes);
-
-    /* android.sensor */
-
-    int32_t android_sensor_info_active_array_size[] = {0, 0, 640, 480};
-    m.addInt32(ANDROID_SENSOR_INFO_ACTIVE_ARRAY_SIZE,
-            ARRAY_SIZE(android_sensor_info_active_array_size),
-            android_sensor_info_active_array_size);
-
-    int32_t android_sensor_info_sensitivity_range[] =
-            {100, 1600};
-    m.addInt32(ANDROID_SENSOR_INFO_SENSITIVITY_RANGE,
-            ARRAY_SIZE(android_sensor_info_sensitivity_range),
-            android_sensor_info_sensitivity_range);
-
-    int64_t android_sensor_info_max_frame_duration[] = {30000000000};
-    m.addInt64(ANDROID_SENSOR_INFO_MAX_FRAME_DURATION,
-            ARRAY_SIZE(android_sensor_info_max_frame_duration),
-            android_sensor_info_max_frame_duration);
-
-    float android_sensor_info_physical_size[] = {3.2, 2.4};
-    m.addFloat(ANDROID_SENSOR_INFO_PHYSICAL_SIZE,
-            ARRAY_SIZE(android_sensor_info_physical_size),
-            android_sensor_info_physical_size);
-
-    int32_t android_sensor_info_pixel_array_size[] = {640, 480};
-    m.addInt32(ANDROID_SENSOR_INFO_PIXEL_ARRAY_SIZE,
-            ARRAY_SIZE(android_sensor_info_pixel_array_size),
-            android_sensor_info_pixel_array_size);
-
-    int32_t android_sensor_orientation[] = {0};
-    m.addInt32(ANDROID_SENSOR_ORIENTATION,
-            ARRAY_SIZE(android_sensor_orientation),
-            android_sensor_orientation);
-
-    /* End of static camera characteristics */
-
-    return clone_camera_metadata(m.generate());
-}
-
 int Camera::configureStreams(camera3_stream_configuration_t *stream_config)
 {
     camera3_stream_t *astream;
     Stream **newStreams = NULL;
 
-    CAMTRACE_CALL();
     ALOGV("%s:%d: stream_config=%p", __func__, mId, stream_config);
+    ATRACE_CALL();
+    android::Mutex::Autolock al(mDeviceLock);
 
     if (stream_config == NULL) {
         ALOGE("%s:%d: NULL stream configuration array", __func__, mId);
@@ -317,8 +159,6 @@
     ALOGV("%s:%d: Number of Streams: %d", __func__, mId,
             stream_config->num_streams);
 
-    pthread_mutex_lock(&mMutex);
-
     // Mark all current streams unused for now
     for (int i = 0; i < mNumStreams; i++)
         mStreams[i]->mReuse = false;
@@ -356,14 +196,11 @@
 
     // Clear out last seen settings metadata
     setSettings(NULL);
-
-    pthread_mutex_unlock(&mMutex);
     return 0;
 
 err_out:
     // Clean up temporary streams, preserve existing mStreams/mNumStreams
     destroyStreams(newStreams, stream_config->num_streams);
-    pthread_mutex_unlock(&mMutex);
     return -EINVAL;
 }
 
@@ -469,15 +306,20 @@
     return stream->registerBuffers(buf_set);
 }
 
+bool Camera::isValidTemplateType(int type)
+{
+    return type < 1 || type >= CAMERA3_TEMPLATE_COUNT;
+}
+
 const camera_metadata_t* Camera::constructDefaultRequestSettings(int type)
 {
     ALOGV("%s:%d: type=%d", __func__, mId, type);
 
-    if (type < 1 || type >= CAMERA3_TEMPLATE_COUNT) {
+    if (!isValidTemplateType(type)) {
         ALOGE("%s:%d: Invalid template request type: %d", __func__, mId, type);
         return NULL;
     }
-    return mTemplates[type]->generate();
+    return mTemplates[type];
 }
 
 int Camera::processCaptureRequest(camera3_capture_request_t *request)
@@ -485,7 +327,7 @@
     camera3_capture_result result;
 
     ALOGV("%s:%d: request=%p", __func__, mId, request);
-    CAMTRACE_CALL();
+    ATRACE_CALL();
 
     if (request == NULL) {
         ALOGE("%s:%d: NULL request recieved", __func__, mId);
@@ -565,12 +407,6 @@
         mSettings = clone_camera_metadata(new_settings);
 }
 
-bool Camera::isValidCaptureSettings(const camera_metadata_t* /*settings*/)
-{
-    // TODO: reject settings that cannot be captured
-    return true;
-}
-
 bool Camera::isValidReprocessSettings(const camera_metadata_t* /*settings*/)
 {
     // TODO: reject settings that cannot be reprocessed
@@ -631,16 +467,65 @@
     mCallbackOps->notify(mCallbackOps, &m);
 }
 
-void Camera::getMetadataVendorTagOps(vendor_tag_query_ops_t *ops)
-{
-    ALOGV("%s:%d: ops=%p", __func__, mId, ops);
-    // TODO: return vendor tag ops
-}
-
 void Camera::dump(int fd)
 {
     ALOGV("%s:%d: Dumping to fd %d", __func__, mId, fd);
-    // TODO: dprintf all relevant state to fd
+    ATRACE_CALL();
+    android::Mutex::Autolock al(mDeviceLock);
+
+    fdprintf(fd, "Camera ID: %d (Busy: %d)\n", mId, mBusy);
+
+    // TODO: dump all settings
+    fdprintf(fd, "Most Recent Settings: (%p)\n", mSettings);
+
+    fdprintf(fd, "Number of streams: %d\n", mNumStreams);
+    for (int i = 0; i < mNumStreams; i++) {
+        fdprintf(fd, "Stream %d/%d:\n", i, mNumStreams);
+        mStreams[i]->dump(fd);
+    }
+}
+
+const char* Camera::templateToString(int type)
+{
+    switch (type) {
+    case CAMERA3_TEMPLATE_PREVIEW:
+        return "CAMERA3_TEMPLATE_PREVIEW";
+    case CAMERA3_TEMPLATE_STILL_CAPTURE:
+        return "CAMERA3_TEMPLATE_STILL_CAPTURE";
+    case CAMERA3_TEMPLATE_VIDEO_RECORD:
+        return "CAMERA3_TEMPLATE_VIDEO_RECORD";
+    case CAMERA3_TEMPLATE_VIDEO_SNAPSHOT:
+        return "CAMERA3_TEMPLATE_VIDEO_SNAPSHOT";
+    case CAMERA3_TEMPLATE_ZERO_SHUTTER_LAG:
+        return "CAMERA3_TEMPLATE_ZERO_SHUTTER_LAG";
+    }
+    // TODO: support vendor templates
+    return "Invalid template type!";
+}
+
+int Camera::setTemplate(int type, camera_metadata_t *settings)
+{
+    android::Mutex::Autolock al(mDeviceLock);
+
+    if (!isValidTemplateType(type)) {
+        ALOGE("%s:%d: Invalid template request type: %d", __func__, mId, type);
+        return -EINVAL;
+    }
+
+    if (mTemplates[type] != NULL) {
+        ALOGE("%s:%d: Setting already constructed template type %s(%d)",
+                __func__, mId, templateToString(type), type);
+        return -EINVAL;
+    }
+
+    // Make a durable copy of the underlying metadata
+    mTemplates[type] = clone_camera_metadata(settings);
+    if (mTemplates[type] == NULL) {
+        ALOGE("%s:%d: Failed to clone metadata %p for template type %s(%d)",
+                __func__, mId, settings, templateToString(type), type);
+        return -EINVAL;
+    }
+    return 0;
 }
 
 extern "C" {
@@ -680,28 +565,30 @@
     return camdev_to_camera(dev)->processCaptureRequest(request);
 }
 
-static void get_metadata_vendor_tag_ops(const camera3_device_t *dev,
-        vendor_tag_query_ops_t *ops)
-{
-    camdev_to_camera(dev)->getMetadataVendorTagOps(ops);
-}
-
 static void dump(const camera3_device_t *dev, int fd)
 {
     camdev_to_camera(dev)->dump(fd);
 }
+
+static int flush(const camera3_device_t*)
+{
+    ALOGE("%s: unimplemented.", __func__);
+    return -1;
+}
+
 } // extern "C"
 
 const camera3_device_ops_t Camera::sOps = {
-    .initialize              = default_camera_hal::initialize,
-    .configure_streams       = default_camera_hal::configure_streams,
+    .initialize = default_camera_hal::initialize,
+    .configure_streams = default_camera_hal::configure_streams,
     .register_stream_buffers = default_camera_hal::register_stream_buffers,
-    .construct_default_request_settings =
-            default_camera_hal::construct_default_request_settings,
+    .construct_default_request_settings
+        = default_camera_hal::construct_default_request_settings,
     .process_capture_request = default_camera_hal::process_capture_request,
-    .get_metadata_vendor_tag_ops =
-            default_camera_hal::get_metadata_vendor_tag_ops,
-    .dump                    = default_camera_hal::dump
+    .get_metadata_vendor_tag_ops = NULL,
+    .dump = default_camera_hal::dump,
+    .flush = default_camera_hal::flush,
+    .reserved = {0},
 };
 
 } // namespace default_camera_hal
diff --git a/modules/camera/Camera.h b/modules/camera/Camera.h
index be672f9..0ceaf25 100644
--- a/modules/camera/Camera.h
+++ b/modules/camera/Camera.h
@@ -17,9 +17,9 @@
 #ifndef CAMERA_H_
 #define CAMERA_H_
 
-#include <pthread.h>
 #include <hardware/hardware.h>
 #include <hardware/camera3.h>
+#include <utils/Mutex.h>
 #include "Metadata.h"
 #include "Stream.h"
 
@@ -28,12 +28,14 @@
 // This is constructed when the HAL module is loaded, one per physical camera.
 // It is opened by the framework, and must be closed before it can be opened
 // again.
+// This is an abstract class, containing all logic and data shared between all
+// camera devices (front, back, etc) and common to the ISP.
 class Camera {
     public:
         // id is used to distinguish cameras. 0 <= id < NUM_CAMERAS.
         // module is a handle to the HAL module, used when the device is opened.
         Camera(int id);
-        ~Camera();
+        virtual ~Camera();
 
         // Common Camera Device Operations (see <hardware/camera_common.h>)
         int open(const hw_module_t *module, hw_device_t **device);
@@ -46,15 +48,24 @@
         int registerStreamBuffers(const camera3_stream_buffer_set_t *buf_set);
         const camera_metadata_t *constructDefaultRequestSettings(int type);
         int processCaptureRequest(camera3_capture_request_t *request);
-        void getMetadataVendorTagOps(vendor_tag_query_ops_t *ops);
         void dump(int fd);
 
-        // Camera device handle returned to framework for use
-        camera3_device_t mDevice;
+
+    protected:
+        // Initialize static camera characteristics for individual device
+        virtual camera_metadata_t *initStaticInfo() = 0;
+        // Verify settings are valid for a capture
+        virtual bool isValidCaptureSettings(const camera_metadata_t *) = 0;
+        // Separate initialization method for individual devices when opened
+        virtual int initDevice() = 0;
+        // Accessor used by initDevice() to set the templates' metadata
+        int setTemplate(int type, camera_metadata_t *static_info);
+        // Prettyprint template names
+        const char* templateToString(int type);
 
     private:
-        // Separate initialization method for static metadata
-        camera_metadata_t *initStaticInfo();
+        // Camera device handle returned to framework for use
+        camera3_device_t mDevice;
         // Reuse a stream already created by this device
         Stream *reuseStream(camera3_stream_t *astream);
         // Destroy all streams in a stream array, and the array itself
@@ -65,8 +76,6 @@
         void setupStreams(Stream **array, int count);
         // Copy new settings for re-use and clean up old settings.
         void setSettings(const camera_metadata_t *new_settings);
-        // Verify settings are valid for a capture
-        bool isValidCaptureSettings(const camera_metadata_t *settings);
         // Verify settings are valid for reprocessing an input buffer
         bool isValidReprocessSettings(const camera_metadata_t *settings);
         // Process an output buffer
@@ -74,6 +83,8 @@
                 camera3_stream_buffer_t *out);
         // Send a shutter notify message with start of exposure time
         void notifyShutter(uint32_t frame_number, uint64_t timestamp);
+        // Is type a valid template type (and valid index into mTemplates)
+        bool isValidTemplateType(int type);
 
         // Identifier used by framework to distinguish cameras
         const int mId;
@@ -88,16 +99,16 @@
         // Methods used to call back into the framework
         const camera3_callback_ops_t *mCallbackOps;
         // Lock protecting the Camera object for modifications
-        pthread_mutex_t mMutex;
+        android::Mutex mDeviceLock;
         // Lock protecting only static camera characteristics, which may
         // be accessed without the camera device open
-        pthread_mutex_t mStaticInfoMutex;
+        android::Mutex mStaticInfoLock;
         // Array of handles to streams currently in use by the device
         Stream **mStreams;
         // Number of streams in mStreams
         int mNumStreams;
         // Static array of standard camera settings templates
-        Metadata *mTemplates[CAMERA3_TEMPLATE_COUNT];
+        camera_metadata_t *mTemplates[CAMERA3_TEMPLATE_COUNT];
         // Most recent request settings seen, memoized to be reused
         camera_metadata_t *mSettings;
 };
diff --git a/modules/camera/CameraHAL.cpp b/modules/camera/CameraHAL.cpp
index dfbbe4c..b04cf0c 100644
--- a/modules/camera/CameraHAL.cpp
+++ b/modules/camera/CameraHAL.cpp
@@ -17,7 +17,8 @@
 #include <cstdlib>
 #include <hardware/camera_common.h>
 #include <hardware/hardware.h>
-#include "Camera.h"
+#include "ExampleCamera.h"
+#include "VendorTags.h"
 
 //#define LOG_NDEBUG 0
 #define LOG_TAG "DefaultCameraHAL"
@@ -38,25 +39,24 @@
 
 // Default Camera HAL has 2 cameras, front and rear.
 static CameraHAL gCameraHAL(2);
+// Handle containing vendor tag functionality
+static VendorTags gVendorTags;
 
 CameraHAL::CameraHAL(int num_cameras)
   : mNumberOfCameras(num_cameras),
     mCallbacks(NULL)
 {
-    int i;
-
     // Allocate camera array and instantiate camera devices
     mCameras = new Camera*[mNumberOfCameras];
-    for (i = 0; i < mNumberOfCameras; i++) {
-        mCameras[i] = new Camera(i);
-    }
+    // Rear camera
+    mCameras[0] = new ExampleCamera(0);
+    // Front camera
+    mCameras[1] = new ExampleCamera(1);
 }
 
 CameraHAL::~CameraHAL()
 {
-    int i;
-
-    for (i = 0; i < mNumberOfCameras; i++) {
+    for (int i = 0; i < mNumberOfCameras; i++) {
         delete mCameras[i];
     }
     delete [] mCameras;
@@ -124,6 +124,41 @@
     return gCameraHAL.setCallbacks(callbacks);
 }
 
+static int get_tag_count(const vendor_tag_ops_t* ops)
+{
+    return gVendorTags.getTagCount(ops);
+}
+
+static void get_all_tags(const vendor_tag_ops_t* ops, uint32_t* tag_array)
+{
+    gVendorTags.getAllTags(ops, tag_array);
+}
+
+static const char* get_section_name(const vendor_tag_ops_t* ops, uint32_t tag)
+{
+    return gVendorTags.getSectionName(ops, tag);
+}
+
+static const char* get_tag_name(const vendor_tag_ops_t* ops, uint32_t tag)
+{
+    return gVendorTags.getTagName(ops, tag);
+}
+
+static int get_tag_type(const vendor_tag_ops_t* ops, uint32_t tag)
+{
+    return gVendorTags.getTagType(ops, tag);
+}
+
+static void get_vendor_tag_ops(vendor_tag_ops_t* ops)
+{
+    ALOGV("%s : ops=%p", __func__, ops);
+    ops->get_tag_count      = get_tag_count;
+    ops->get_all_tags       = get_all_tags;
+    ops->get_section_name   = get_section_name;
+    ops->get_tag_name       = get_tag_name;
+    ops->get_tag_type       = get_tag_type;
+}
+
 static int open_dev(const hw_module_t* mod, const char* name, hw_device_t** dev)
 {
     return gCameraHAL.open(mod, name, dev);
@@ -136,7 +171,7 @@
 camera_module_t HAL_MODULE_INFO_SYM __attribute__ ((visibility("default"))) = {
     common : {
         tag                : HARDWARE_MODULE_TAG,
-        module_api_version : CAMERA_MODULE_API_VERSION_2_0,
+        module_api_version : CAMERA_MODULE_API_VERSION_2_2,
         hal_api_version    : HARDWARE_HAL_API_VERSION,
         id                 : CAMERA_HARDWARE_MODULE_ID,
         name               : "Default Camera HAL",
@@ -147,7 +182,9 @@
     },
     get_number_of_cameras : get_number_of_cameras,
     get_camera_info       : get_camera_info,
-    set_callbacks         : set_callbacks
+    set_callbacks         : set_callbacks,
+    get_vendor_tag_ops    : get_vendor_tag_ops,
+    reserved              : {0},
 };
 } // extern "C"
 
diff --git a/modules/camera/CameraHAL.h b/modules/camera/CameraHAL.h
index ba0db4e..00c74e5 100644
--- a/modules/camera/CameraHAL.h
+++ b/modules/camera/CameraHAL.h
@@ -20,7 +20,9 @@
 #include <cutils/bitops.h>
 #include <hardware/hardware.h>
 #include <hardware/camera_common.h>
+#include <system/camera_vendor_tags.h>
 #include "Camera.h"
+#include "VendorTags.h"
 
 namespace default_camera_hal {
 // CameraHAL contains all module state that isn't specific to an individual
@@ -34,6 +36,7 @@
         int getNumberOfCameras();
         int getCameraInfo(int camera_id, struct camera_info *info);
         int setCallbacks(const camera_module_callbacks_t *callbacks);
+        void getVendorTagOps(vendor_tag_ops_t* ops);
 
         // Hardware Module Interface (see <hardware/hardware.h>)
         int open(const hw_module_t* mod, const char* name, hw_device_t** dev);
diff --git a/modules/camera/ExampleCamera.cpp b/modules/camera/ExampleCamera.cpp
new file mode 100644
index 0000000..ca28b99
--- /dev/null
+++ b/modules/camera/ExampleCamera.cpp
@@ -0,0 +1,273 @@
+/*
+ * Copyright (C) 2013 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <system/camera_metadata.h>
+#include "Camera.h"
+
+//#define LOG_NDEBUG 0
+#define LOG_TAG "ExampleCamera"
+#include <cutils/log.h>
+
+#define ATRACE_TAG (ATRACE_TAG_CAMERA | ATRACE_TAG_HAL)
+#include <utils/Trace.h>
+
+#include "ExampleCamera.h"
+
+#define ARRAY_SIZE(a) (sizeof(a) / sizeof(a[0]))
+
+namespace default_camera_hal {
+
+ExampleCamera::ExampleCamera(int id) : Camera(id)
+{
+}
+
+ExampleCamera::~ExampleCamera()
+{
+}
+
+camera_metadata_t *ExampleCamera::initStaticInfo()
+{
+    /*
+     * Setup static camera info.  This will have to customized per camera
+     * device.
+     */
+    Metadata m;
+
+    /* android.control */
+    int32_t android_control_ae_available_target_fps_ranges[] = {30, 30};
+    m.addInt32(ANDROID_CONTROL_AE_AVAILABLE_TARGET_FPS_RANGES,
+            ARRAY_SIZE(android_control_ae_available_target_fps_ranges),
+            android_control_ae_available_target_fps_ranges);
+
+    int32_t android_control_ae_compensation_range[] = {-4, 4};
+    m.addInt32(ANDROID_CONTROL_AE_COMPENSATION_RANGE,
+            ARRAY_SIZE(android_control_ae_compensation_range),
+            android_control_ae_compensation_range);
+
+    camera_metadata_rational_t android_control_ae_compensation_step[] = {{2,1}};
+    m.addRational(ANDROID_CONTROL_AE_COMPENSATION_STEP,
+            ARRAY_SIZE(android_control_ae_compensation_step),
+            android_control_ae_compensation_step);
+
+    int32_t android_control_max_regions[] = {/*AE*/ 1,/*AWB*/ 1,/*AF*/ 1};
+    m.addInt32(ANDROID_CONTROL_MAX_REGIONS,
+            ARRAY_SIZE(android_control_max_regions),
+            android_control_max_regions);
+
+    /* android.jpeg */
+    int32_t android_jpeg_available_thumbnail_sizes[] = {0, 0, 128, 96};
+    m.addInt32(ANDROID_JPEG_AVAILABLE_THUMBNAIL_SIZES,
+            ARRAY_SIZE(android_jpeg_available_thumbnail_sizes),
+            android_jpeg_available_thumbnail_sizes);
+
+    int32_t android_jpeg_max_size[] = {13 * 1024 * 1024}; // 13MB
+    m.addInt32(ANDROID_JPEG_MAX_SIZE,
+            ARRAY_SIZE(android_jpeg_max_size),
+            android_jpeg_max_size);
+
+    /* android.lens */
+    float android_lens_info_available_focal_lengths[] = {1.0};
+    m.addFloat(ANDROID_LENS_INFO_AVAILABLE_FOCAL_LENGTHS,
+            ARRAY_SIZE(android_lens_info_available_focal_lengths),
+            android_lens_info_available_focal_lengths);
+
+    /* android.request */
+    int32_t android_request_max_num_output_streams[] = {0, 3, 1};
+    m.addInt32(ANDROID_REQUEST_MAX_NUM_OUTPUT_STREAMS,
+            ARRAY_SIZE(android_request_max_num_output_streams),
+            android_request_max_num_output_streams);
+
+    /* android.scaler */
+    int32_t android_scaler_available_formats[] = {
+            HAL_PIXEL_FORMAT_RAW_SENSOR,
+            HAL_PIXEL_FORMAT_BLOB,
+            HAL_PIXEL_FORMAT_RGBA_8888,
+            HAL_PIXEL_FORMAT_IMPLEMENTATION_DEFINED,
+            // These are handled by YCbCr_420_888
+            //        HAL_PIXEL_FORMAT_YV12,
+            //        HAL_PIXEL_FORMAT_YCrCb_420_SP,
+            HAL_PIXEL_FORMAT_YCbCr_420_888};
+    m.addInt32(ANDROID_SCALER_AVAILABLE_FORMATS,
+            ARRAY_SIZE(android_scaler_available_formats),
+            android_scaler_available_formats);
+
+    int64_t android_scaler_available_jpeg_min_durations[] = {1};
+    m.addInt64(ANDROID_SCALER_AVAILABLE_JPEG_MIN_DURATIONS,
+            ARRAY_SIZE(android_scaler_available_jpeg_min_durations),
+            android_scaler_available_jpeg_min_durations);
+
+    int32_t android_scaler_available_jpeg_sizes[] = {640, 480};
+    m.addInt32(ANDROID_SCALER_AVAILABLE_JPEG_SIZES,
+            ARRAY_SIZE(android_scaler_available_jpeg_sizes),
+            android_scaler_available_jpeg_sizes);
+
+    float android_scaler_available_max_digital_zoom[] = {1};
+    m.addFloat(ANDROID_SCALER_AVAILABLE_MAX_DIGITAL_ZOOM,
+            ARRAY_SIZE(android_scaler_available_max_digital_zoom),
+            android_scaler_available_max_digital_zoom);
+
+    int64_t android_scaler_available_processed_min_durations[] = {1};
+    m.addInt64(ANDROID_SCALER_AVAILABLE_PROCESSED_MIN_DURATIONS,
+            ARRAY_SIZE(android_scaler_available_processed_min_durations),
+            android_scaler_available_processed_min_durations);
+
+    int32_t android_scaler_available_processed_sizes[] = {640, 480};
+    m.addInt32(ANDROID_SCALER_AVAILABLE_PROCESSED_SIZES,
+            ARRAY_SIZE(android_scaler_available_processed_sizes),
+            android_scaler_available_processed_sizes);
+
+    int64_t android_scaler_available_raw_min_durations[] = {1};
+    m.addInt64(ANDROID_SCALER_AVAILABLE_RAW_MIN_DURATIONS,
+            ARRAY_SIZE(android_scaler_available_raw_min_durations),
+            android_scaler_available_raw_min_durations);
+
+    int32_t android_scaler_available_raw_sizes[] = {640, 480};
+    m.addInt32(ANDROID_SCALER_AVAILABLE_RAW_SIZES,
+            ARRAY_SIZE(android_scaler_available_raw_sizes),
+            android_scaler_available_raw_sizes);
+
+    /* android.sensor */
+
+    int32_t android_sensor_info_active_array_size[] = {0, 0, 640, 480};
+    m.addInt32(ANDROID_SENSOR_INFO_ACTIVE_ARRAY_SIZE,
+            ARRAY_SIZE(android_sensor_info_active_array_size),
+            android_sensor_info_active_array_size);
+
+    int32_t android_sensor_info_sensitivity_range[] =
+            {100, 1600};
+    m.addInt32(ANDROID_SENSOR_INFO_SENSITIVITY_RANGE,
+            ARRAY_SIZE(android_sensor_info_sensitivity_range),
+            android_sensor_info_sensitivity_range);
+
+    int64_t android_sensor_info_max_frame_duration[] = {30000000000};
+    m.addInt64(ANDROID_SENSOR_INFO_MAX_FRAME_DURATION,
+            ARRAY_SIZE(android_sensor_info_max_frame_duration),
+            android_sensor_info_max_frame_duration);
+
+    float android_sensor_info_physical_size[] = {3.2, 2.4};
+    m.addFloat(ANDROID_SENSOR_INFO_PHYSICAL_SIZE,
+            ARRAY_SIZE(android_sensor_info_physical_size),
+            android_sensor_info_physical_size);
+
+    int32_t android_sensor_info_pixel_array_size[] = {640, 480};
+    m.addInt32(ANDROID_SENSOR_INFO_PIXEL_ARRAY_SIZE,
+            ARRAY_SIZE(android_sensor_info_pixel_array_size),
+            android_sensor_info_pixel_array_size);
+
+    int32_t android_sensor_orientation[] = {0};
+    m.addInt32(ANDROID_SENSOR_ORIENTATION,
+            ARRAY_SIZE(android_sensor_orientation),
+            android_sensor_orientation);
+
+    /* End of static camera characteristics */
+
+    return clone_camera_metadata(m.get());
+}
+
+int ExampleCamera::initDevice()
+{
+    int res;
+    Metadata base;
+
+    // Create standard settings templates from copies of base metadata
+    // TODO: use vendor tags in base metadata
+    res = base.add1UInt8(ANDROID_CONTROL_MODE, ANDROID_CONTROL_MODE_OFF);
+    if (res)
+        return res;
+
+    // Use base settings to create all other templates and set them
+    res = setPreviewTemplate(base);
+    if (res)
+        return res;
+    res = setStillTemplate(base);
+    if (res)
+        return res;
+    res = setRecordTemplate(base);
+    if (res)
+        return res;
+    res = setSnapshotTemplate(base);
+    if (res)
+        return res;
+    res = setZslTemplate(base);
+    if (res)
+        return res;
+
+    return 0;
+}
+
+int ExampleCamera::setPreviewTemplate(Metadata m)
+{
+    // Setup default preview controls
+    int res = m.add1UInt8(ANDROID_CONTROL_CAPTURE_INTENT,
+                            ANDROID_CONTROL_CAPTURE_INTENT_PREVIEW);
+
+    if (res)
+        return res;
+    // TODO: set fast auto-focus, auto-whitebalance, auto-exposure, auto flash
+    return setTemplate(CAMERA3_TEMPLATE_PREVIEW, m.get());
+}
+
+int ExampleCamera::setStillTemplate(Metadata m)
+{
+    int res = m.add1UInt8(ANDROID_CONTROL_CAPTURE_INTENT,
+                            ANDROID_CONTROL_CAPTURE_INTENT_STILL_CAPTURE);
+    // Setup default still capture controls
+    if (res)
+        return res;
+    // TODO: set fast auto-focus, auto-whitebalance, auto-exposure, auto flash
+    return setTemplate(CAMERA3_TEMPLATE_STILL_CAPTURE, m.get());
+}
+
+int ExampleCamera::setRecordTemplate(Metadata m)
+{
+    int res = m.add1UInt8(ANDROID_CONTROL_CAPTURE_INTENT,
+                            ANDROID_CONTROL_CAPTURE_INTENT_VIDEO_RECORD);
+    // Setup default video record controls
+    if (res)
+        return res;
+    // TODO: set slow auto-focus, auto-whitebalance, auto-exposure, flash off
+    return setTemplate(CAMERA3_TEMPLATE_VIDEO_RECORD, m.get());
+}
+
+int ExampleCamera::setSnapshotTemplate(Metadata m)
+{
+    int res = m.add1UInt8(ANDROID_CONTROL_CAPTURE_INTENT,
+                            ANDROID_CONTROL_CAPTURE_INTENT_VIDEO_SNAPSHOT);
+    // Setup default video snapshot controls
+    if (res)
+        return res;
+    // TODO: set slow auto-focus, auto-whitebalance, auto-exposure, flash off
+    return setTemplate(CAMERA3_TEMPLATE_VIDEO_SNAPSHOT, m.get());
+}
+
+int ExampleCamera::setZslTemplate(Metadata m)
+{
+    int res = m.add1UInt8(ANDROID_CONTROL_CAPTURE_INTENT,
+                            ANDROID_CONTROL_CAPTURE_INTENT_ZERO_SHUTTER_LAG);
+    // Setup default zero shutter lag controls
+    if (res)
+        return res;
+    // TODO: set reprocessing parameters for zsl input queue
+    return setTemplate(CAMERA3_TEMPLATE_ZERO_SHUTTER_LAG, m.get());
+}
+
+bool ExampleCamera::isValidCaptureSettings(const camera_metadata_t* settings)
+{
+    // TODO: reject settings that cannot be captured
+    return true;
+}
+
+} // namespace default_camera_hal
diff --git a/modules/camera/ExampleCamera.h b/modules/camera/ExampleCamera.h
new file mode 100644
index 0000000..45c4a94
--- /dev/null
+++ b/modules/camera/ExampleCamera.h
@@ -0,0 +1,49 @@
+/*
+ * Copyright (C) 2013 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef EXAMPLE_CAMERA_H_
+#define EXAMPLE_CAMERA_H_
+
+#include <system/camera_metadata.h>
+#include "Camera.h"
+
+namespace default_camera_hal {
+// ExampleCamera is an example for a specific camera device. The Camera object
+// contains all logic common between all cameras (e.g. front and back cameras),
+// while a specific camera device (e.g. ExampleCamera) holds all specific
+// metadata and logic about that device.
+class ExampleCamera : public Camera {
+    public:
+        ExampleCamera(int id);
+        ~ExampleCamera();
+
+    private:
+        // Initialize static camera characteristics for individual device
+        camera_metadata_t *initStaticInfo();
+        // Initialize whole device (templates/etc) when opened
+        int initDevice();
+        // Initialize each template metadata controls
+        int setPreviewTemplate(Metadata m);
+        int setStillTemplate(Metadata m);
+        int setRecordTemplate(Metadata m);
+        int setSnapshotTemplate(Metadata m);
+        int setZslTemplate(Metadata m);
+        // Verify settings are valid for a capture with this device
+        bool isValidCaptureSettings(const camera_metadata_t* settings);
+};
+} // namespace default_camera_hal
+
+#endif // CAMERA_H_
diff --git a/modules/camera/Metadata.cpp b/modules/camera/Metadata.cpp
index d5854f9..f195534 100644
--- a/modules/camera/Metadata.cpp
+++ b/modules/camera/Metadata.cpp
@@ -14,7 +14,6 @@
  * limitations under the License.
  */
 
-#include <pthread.h>
 #include <system/camera_metadata.h>
 
 //#define LOG_NDEBUG 0
@@ -22,102 +21,85 @@
 #include <cutils/log.h>
 
 #define ATRACE_TAG (ATRACE_TAG_CAMERA | ATRACE_TAG_HAL)
-#include <cutils/trace.h>
-#include "ScopedTrace.h"
+#include <utils/Trace.h>
 
 #include "Metadata.h"
 
 namespace default_camera_hal {
 
-Metadata::Metadata()
-  : mHead(NULL),
-    mTail(NULL),
-    mEntryCount(0),
-    mDataCount(0),
-    mGenerated(NULL),
-    mDirty(true)
+Metadata::Metadata():
+    mData(NULL)
 {
-    // NULL (default) pthread mutex attributes
-    pthread_mutex_init(&mMutex, NULL);
 }
 
 Metadata::~Metadata()
 {
-    Entry *current = mHead;
-
-    while (current != NULL) {
-        Entry *tmp = current;
-        current = current->mNext;
-        delete tmp;
-    }
-
-    if (mGenerated != NULL)
-        free_camera_metadata(mGenerated);
-
-    pthread_mutex_destroy(&mMutex);
+    replace(NULL);
 }
 
-Metadata::Metadata(uint8_t mode, uint8_t intent)
-  : mHead(NULL),
-    mTail(NULL),
-    mEntryCount(0),
-    mDataCount(0),
-    mGenerated(NULL),
-    mDirty(true)
+void Metadata::replace(camera_metadata_t *m)
 {
-    pthread_mutex_init(&mMutex, NULL);
-
-    if (validate(ANDROID_CONTROL_MODE, TYPE_BYTE, 1)) {
-        int res = add(ANDROID_CONTROL_MODE, 1, &mode);
-        if (res != 0) {
-            ALOGE("%s: Unable to add mode to template!", __func__);
-        }
-    } else {
-        ALOGE("%s: Invalid mode constructing template!", __func__);
+    if (m == mData) {
+        ALOGE("%s: Replacing metadata with itself?!", __func__);
+        return;
     }
-
-    if (validate(ANDROID_CONTROL_CAPTURE_INTENT, TYPE_BYTE, 1)) {
-        int res = add(ANDROID_CONTROL_CAPTURE_INTENT, 1, &intent);
-        if (res != 0) {
-            ALOGE("%s: Unable to add capture intent to template!", __func__);
-        }
-    } else {
-        ALOGE("%s: Invalid capture intent constructing template!", __func__);
-    }
+    if (mData)
+        free_camera_metadata(mData);
+    mData = m;
 }
 
-int Metadata::addUInt8(uint32_t tag, int count, uint8_t *data)
+int Metadata::init(const camera_metadata_t *metadata)
+{
+    camera_metadata_t* tmp;
+
+    if (!validate_camera_metadata_structure(metadata, NULL))
+        return -EINVAL;
+
+    tmp = clone_camera_metadata(metadata);
+    if (tmp == NULL)
+        return -EINVAL;
+
+    replace(tmp);
+    return 0;
+}
+
+int Metadata::addUInt8(uint32_t tag, int count, const uint8_t *data)
 {
     if (!validate(tag, TYPE_BYTE, count)) return -EINVAL;
     return add(tag, count, data);
 }
 
-int Metadata::addInt32(uint32_t tag, int count, int32_t *data)
+int Metadata::add1UInt8(uint32_t tag, const uint8_t data)
+{
+    return addUInt8(tag, 1, &data);
+}
+
+int Metadata::addInt32(uint32_t tag, int count, const int32_t *data)
 {
     if (!validate(tag, TYPE_INT32, count)) return -EINVAL;
     return add(tag, count, data);
 }
 
-int Metadata::addFloat(uint32_t tag, int count, float *data)
+int Metadata::addFloat(uint32_t tag, int count, const float *data)
 {
     if (!validate(tag, TYPE_FLOAT, count)) return -EINVAL;
     return add(tag, count, data);
 }
 
-int Metadata::addInt64(uint32_t tag, int count, int64_t *data)
+int Metadata::addInt64(uint32_t tag, int count, const int64_t *data)
 {
     if (!validate(tag, TYPE_INT64, count)) return -EINVAL;
     return add(tag, count, data);
 }
 
-int Metadata::addDouble(uint32_t tag, int count, double *data)
+int Metadata::addDouble(uint32_t tag, int count, const double *data)
 {
     if (!validate(tag, TYPE_DOUBLE, count)) return -EINVAL;
     return add(tag, count, data);
 }
 
 int Metadata::addRational(uint32_t tag, int count,
-        camera_metadata_rational_t *data)
+        const camera_metadata_rational_t *data)
 {
     if (!validate(tag, TYPE_RATIONAL, count)) return -EINVAL;
     return add(tag, count, data);
@@ -145,102 +127,48 @@
     return true;
 }
 
-int Metadata::add(uint32_t tag, int count, void *tag_data)
+int Metadata::add(uint32_t tag, int count, const void *tag_data)
 {
+    int res;
+    camera_metadata_t* tmp;
     int tag_type = get_camera_metadata_tag_type(tag);
-    size_t type_sz = camera_metadata_type_size[tag_type];
+    size_t size = calculate_camera_metadata_entry_data_size(tag_type, count);
+    size_t entry_capacity = get_camera_metadata_entry_count(mData) + 1;
+    size_t data_capacity = get_camera_metadata_data_count(mData) + size;
 
-    // Allocate array to hold new metadata
-    void *data = malloc(count * type_sz);
-    if (data == NULL)
+    // Opportunistically attempt to add if metadata has room for it
+    if (!add_camera_metadata_entry(mData, tag, tag_data, count))
+        return 0;
+
+    // Double new dimensions to minimize future reallocations
+    tmp = allocate_camera_metadata(entry_capacity * 2, data_capacity * 2);
+    if (tmp == NULL) {
+        ALOGE("%s: Failed to allocate new metadata with %zu entries, %zu data",
+                __func__, entry_capacity, data_capacity);
         return -ENOMEM;
-    memcpy(data, tag_data, count * type_sz);
+    }
+    // Append the current metadata to the new (empty) metadata
+    res = append_camera_metadata(tmp, mData);
+    if (res) {
+        ALOGE("%s: Failed to append old metadata %p to new %p",
+                __func__, mData, tmp);
+        return res;
+    }
+    // Add the remaining new item
+    res = add_camera_metadata_entry(tmp, tag, tag_data, count);
+    if (res) {
+        ALOGE("%s: Failed to add new entry (%d, %p, %d) to metadata %p",
+                __func__, tag, tag_data, count, tmp);
+        return res;
+    }
 
-    pthread_mutex_lock(&mMutex);
-    mEntryCount++;
-    mDataCount += calculate_camera_metadata_entry_data_size(tag_type, count);
-    push(new Entry(tag, data, count));
-    mDirty = true;
-    pthread_mutex_unlock(&mMutex);
+    replace(tmp);
     return 0;
 }
 
-camera_metadata_t* Metadata::generate()
+camera_metadata_t* Metadata::get()
 {
-    pthread_mutex_lock(&mMutex);
-    // Reuse if old generated metadata still valid
-    if (!mDirty && mGenerated != NULL) {
-        ALOGV("%s: Reusing generated metadata at %p", __func__, mGenerated);
-        goto out;
-    }
-    // Destroy old metadata
-    if (mGenerated != NULL) {
-        ALOGV("%s: Freeing generated metadata at %p", __func__, mGenerated);
-        free_camera_metadata(mGenerated);
-        mGenerated = NULL;
-    }
-    // Generate new metadata structure
-    ALOGV("%s: Generating new camera metadata structure, Entries:%d Data:%d",
-            __func__, mEntryCount, mDataCount);
-    mGenerated = allocate_camera_metadata(mEntryCount, mDataCount);
-    if (mGenerated == NULL) {
-        ALOGE("%s: Failed to allocate metadata (%d entries %d data)",
-                __func__, mEntryCount, mDataCount);
-        goto out;
-    }
-    // Walk list of entries adding each one to newly allocated metadata
-    for (Entry *current = mHead; current != NULL; current = current->mNext) {
-        int res = add_camera_metadata_entry(mGenerated, current->mTag,
-                current->mData, current->mCount);
-        if (res != 0) {
-            ALOGE("%s: Failed to add camera metadata: %d", __func__, res);
-            free_camera_metadata(mGenerated);
-            mGenerated = NULL;
-            goto out;
-        }
-    }
-
-out:
-    pthread_mutex_unlock(&mMutex);
-    return mGenerated;
-}
-
-Metadata::Entry::Entry(uint32_t tag, void *data, int count)
-  : mNext(NULL),
-    mPrev(NULL),
-    mTag(tag),
-    mData(data),
-    mCount(count)
-{
-}
-
-void Metadata::push(Entry *e)
-{
-    if (mHead == NULL) {
-        mHead = mTail = e;
-    } else {
-        mTail->insertAfter(e);
-        mTail = e;
-    }
-}
-
-Metadata::Entry::~Entry()
-{
-    if (mNext != NULL)
-        mNext->mPrev = mPrev;
-    if (mPrev != NULL)
-        mPrev->mNext = mNext;
-}
-
-void Metadata::Entry::insertAfter(Entry *e)
-{
-    if (e == NULL)
-        return;
-    if (mNext != NULL)
-        mNext->mPrev = e;
-    e->mNext = mNext;
-    e->mPrev = this;
-    mNext = e;
+    return mData;
 }
 
 } // namespace default_camera_hal
diff --git a/modules/camera/Metadata.h b/modules/camera/Metadata.h
index 22d2f22..f432d04 100644
--- a/modules/camera/Metadata.h
+++ b/modules/camera/Metadata.h
@@ -17,10 +17,9 @@
 #ifndef METADATA_H_
 #define METADATA_H_
 
+#include <stdint.h>
 #include <hardware/camera3.h>
-#include <hardware/gralloc.h>
 #include <system/camera_metadata.h>
-#include <system/graphics.h>
 
 namespace default_camera_hal {
 // Metadata is a convenience class for dealing with libcamera_metadata
@@ -28,51 +27,32 @@
     public:
         Metadata();
         ~Metadata();
-        // Constructor used for request metadata templates
-        Metadata(uint8_t mode, uint8_t intent);
+        // Initialize with framework metadata
+        int init(const camera_metadata_t *metadata);
 
-        // Parse and add an entry
-        int addUInt8(uint32_t tag, int count, uint8_t *data);
-        int addInt32(uint32_t tag, int count, int32_t *data);
-        int addFloat(uint32_t tag, int count, float *data);
-        int addInt64(uint32_t tag, int count, int64_t *data);
-        int addDouble(uint32_t tag, int count, double *data);
+        // Parse and add an entry. Allocates and copies new storage for *data.
+        int addUInt8(uint32_t tag, int count, const uint8_t *data);
+        int add1UInt8(uint32_t tag, const uint8_t data);
+        int addInt32(uint32_t tag, int count, const int32_t *data);
+        int addFloat(uint32_t tag, int count, const float *data);
+        int addInt64(uint32_t tag, int count, const int64_t *data);
+        int addDouble(uint32_t tag, int count, const double *data);
         int addRational(uint32_t tag, int count,
-                camera_metadata_rational_t *data);
-        // Generate a camera_metadata structure and fill it with internal data
-        camera_metadata_t *generate();
+                const camera_metadata_rational_t *data);
+
+        // Get a handle to the current metadata
+        // This is not a durable handle, and may be destroyed by add*/init
+        camera_metadata_t* get();
 
     private:
+        // Actual internal storage
+        camera_metadata_t* mData;
+        // Destroy old metadata and replace with new
+        void replace(camera_metadata_t *m);
         // Validate the tag, type and count for a metadata entry
         bool validate(uint32_t tag, int tag_type, int count);
-        // Add a verified tag with data to this Metadata structure
-        int add(uint32_t tag, int count, void *tag_data);
-
-        class Entry {
-            public:
-                Entry(uint32_t tag, void *data, int count);
-                ~Entry();
-                Entry *mNext;
-                Entry *mPrev;
-                const uint32_t mTag;
-                const void *mData;
-                const int mCount;
-                void insertAfter(Entry *e);
-        };
-        // List ends
-        Entry *mHead;
-        Entry *mTail;
-        // Append entry to list
-        void push(Entry *e);
-        // Total of entries and entry data size
-        int mEntryCount;
-        int mDataCount;
-        // Save generated metadata, invalidated on update
-        camera_metadata_t *mGenerated;
-        // Flag to force metadata regeneration
-        bool mDirty;
-        // Lock protecting the Metadata object for modifications
-        pthread_mutex_t mMutex;
+        // Add a verified tag with data
+        int add(uint32_t tag, int count, const void *tag_data);
 };
 } // namespace default_camera_hal
 
diff --git a/modules/camera/ScopedTrace.h b/modules/camera/ScopedTrace.h
deleted file mode 100644
index ed00570..0000000
--- a/modules/camera/ScopedTrace.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * Copyright (C) 2013 The Android Open Source Project
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#ifndef CAMERA_SCOPED_TRACE_H
-#define CAMERA_SCOPED_TRACE_H
-
-#include <stdint.h>
-#include <cutils/trace.h>
-
-// See <cutils/trace.h> for more tracing macros.
-
-// CAMTRACE_NAME traces the beginning and end of the current scope.  To trace
-// the correct start and end times this macro should be declared first in the
-// scope body.
-#define CAMTRACE_NAME(name) ScopedTrace ___tracer(ATRACE_TAG, name)
-// CAMTRACE_CALL is an ATRACE_NAME that uses the current function name.
-#define CAMTRACE_CALL() CAMTRACE_NAME(__FUNCTION__)
-
-namespace default_camera_hal {
-
-class ScopedTrace {
-public:
-inline ScopedTrace(uint64_t tag, const char* name)
-    : mTag(tag) {
-    atrace_begin(mTag,name);
-}
-
-inline ~ScopedTrace() {
-    atrace_end(mTag);
-}
-
-private:
-    uint64_t mTag;
-};
-
-}; // namespace default_camera_hal
-
-#endif // CAMERA_SCOPED_TRACE_H
diff --git a/modules/camera/Stream.cpp b/modules/camera/Stream.cpp
index aae7adb..b846a71 100644
--- a/modules/camera/Stream.cpp
+++ b/modules/camera/Stream.cpp
@@ -14,18 +14,18 @@
  * limitations under the License.
  */
 
-#include <pthread.h>
+#include <stdio.h>
 #include <hardware/camera3.h>
 #include <hardware/gralloc.h>
 #include <system/graphics.h>
+#include <utils/Mutex.h>
 
 //#define LOG_NDEBUG 0
 #define LOG_TAG "Stream"
 #include <cutils/log.h>
 
 #define ATRACE_TAG (ATRACE_TAG_CAMERA | ATRACE_TAG_HAL)
-#include <cutils/trace.h>
-#include "ScopedTrace.h"
+#include <utils/Trace.h>
 
 #include "Stream.h"
 
@@ -45,37 +45,32 @@
     mBuffers(0),
     mNumBuffers(0)
 {
-    // NULL (default) pthread mutex attributes
-    pthread_mutex_init(&mMutex, NULL);
 }
 
 Stream::~Stream()
 {
-    pthread_mutex_lock(&mMutex);
+    android::Mutex::Autolock al(mLock);
     unregisterBuffers_L();
-    pthread_mutex_unlock(&mMutex);
 }
 
 void Stream::setUsage(uint32_t usage)
 {
-    pthread_mutex_lock(&mMutex);
+    android::Mutex::Autolock al(mLock);
     if (usage != mUsage) {
         mUsage = usage;
         mStream->usage = usage;
         unregisterBuffers_L();
     }
-    pthread_mutex_unlock(&mMutex);
 }
 
 void Stream::setMaxBuffers(uint32_t max_buffers)
 {
-    pthread_mutex_lock(&mMutex);
+    android::Mutex::Autolock al(mLock);
     if (max_buffers != mMaxBuffers) {
         mMaxBuffers = max_buffers;
         mStream->max_buffers = max_buffers;
         unregisterBuffers_L();
     }
-    pthread_mutex_unlock(&mMutex);
 }
 
 int Stream::getType()
@@ -95,6 +90,61 @@
         mType == CAMERA3_STREAM_BIDIRECTIONAL;
 }
 
+const char* Stream::typeToString(int type)
+{
+    switch (type) {
+    case CAMERA3_STREAM_INPUT:
+        return "CAMERA3_STREAM_INPUT";
+    case CAMERA3_STREAM_OUTPUT:
+        return "CAMERA3_STREAM_OUTPUT";
+    case CAMERA3_STREAM_BIDIRECTIONAL:
+        return "CAMERA3_STREAM_BIDIRECTIONAL";
+    }
+    return "Invalid stream type!";
+}
+
+const char* Stream::formatToString(int format)
+{
+    // See <system/graphics.h> for full list
+    switch (format) {
+    case HAL_PIXEL_FORMAT_BGRA_8888:
+        return "BGRA 8888";
+    case HAL_PIXEL_FORMAT_RGBA_8888:
+        return "RGBA 8888";
+    case HAL_PIXEL_FORMAT_RGBX_8888:
+        return "RGBX 8888";
+    case HAL_PIXEL_FORMAT_RGB_888:
+        return "RGB 888";
+    case HAL_PIXEL_FORMAT_RGB_565:
+        return "RGB 565";
+    case HAL_PIXEL_FORMAT_sRGB_A_8888:
+        return "sRGB A 8888";
+    case HAL_PIXEL_FORMAT_sRGB_X_8888:
+        return "sRGB B 8888";
+    case HAL_PIXEL_FORMAT_Y8:
+        return "Y8";
+    case HAL_PIXEL_FORMAT_Y16:
+        return "Y16";
+    case HAL_PIXEL_FORMAT_YV12:
+        return "YV12";
+    case HAL_PIXEL_FORMAT_YCbCr_422_SP:
+        return "NV16";
+    case HAL_PIXEL_FORMAT_YCrCb_420_SP:
+        return "NV21";
+    case HAL_PIXEL_FORMAT_YCbCr_422_I:
+        return "YUY2";
+    case HAL_PIXEL_FORMAT_RAW_SENSOR:
+        return "RAW SENSOR";
+    case HAL_PIXEL_FORMAT_BLOB:
+        return "BLOB";
+    case HAL_PIXEL_FORMAT_IMPLEMENTATION_DEFINED:
+        return "IMPLEMENTATION DEFINED";
+    case HAL_PIXEL_FORMAT_YCbCr_420_888:
+        return "FLEXIBLE YCbCr 420 888";
+    }
+    return "Invalid stream format!";
+}
+
 bool Stream::isRegistered()
 {
     return mRegistered;
@@ -113,15 +163,15 @@
         return false;
     }
     if (s->stream_type != mType) {
-        // TODO: prettyprint type string
-        ALOGE("%s:%d: Mismatched type in reused stream. Got %d expect %d",
-                __func__, mId, s->stream_type, mType);
+        ALOGE("%s:%d: Mismatched type in reused stream. Got %s(%d) "
+                "expect %s(%d)", __func__, mId, typeToString(s->stream_type),
+                s->stream_type, typeToString(mType), mType);
         return false;
     }
     if (s->format != mFormat) {
-        // TODO: prettyprint format string
-        ALOGE("%s:%d: Mismatched format in reused stream. Got %d expect %d",
-                __func__, mId, s->format, mFormat);
+        ALOGE("%s:%d: Mismatched format in reused stream. Got %s(%d) "
+                "expect %s(%d)", __func__, mId, formatToString(s->format),
+                s->format, formatToString(mFormat), mFormat);
         return false;
     }
     if (s->width != mWidth) {
@@ -139,7 +189,8 @@
 
 int Stream::registerBuffers(const camera3_stream_buffer_set_t *buf_set)
 {
-    CAMTRACE_CALL();
+    ATRACE_CALL();
+    android::Mutex::Autolock al(mLock);
 
     if (buf_set->stream != mStream) {
         ALOGE("%s:%d: Buffer set for invalid stream. Got %p expect %p",
@@ -147,8 +198,6 @@
         return -EINVAL;
     }
 
-    pthread_mutex_lock(&mMutex);
-
     mNumBuffers = buf_set->num_buffers;
     mBuffers = new buffer_handle_t*[mNumBuffers];
 
@@ -160,12 +209,10 @@
     }
     mRegistered = true;
 
-    pthread_mutex_unlock(&mMutex);
-
     return 0;
 }
 
-// This must only be called with mMutex held
+// This must only be called with mLock held
 void Stream::unregisterBuffers_L()
 {
     mRegistered = false;
@@ -174,4 +221,23 @@
     // TODO: unregister buffers from hw
 }
 
+void Stream::dump(int fd)
+{
+    android::Mutex::Autolock al(mLock);
+
+    fdprintf(fd, "Stream ID: %d (%p)\n", mId, mStream);
+    fdprintf(fd, "Stream Type: %s (%d)\n", typeToString(mType), mType);
+    fdprintf(fd, "Width: %"PRIu32" Height: %"PRIu32"\n", mWidth, mHeight);
+    fdprintf(fd, "Stream Format: %s (%d)", formatToString(mFormat), mFormat);
+    // ToDo: prettyprint usage mask flags
+    fdprintf(fd, "Gralloc Usage Mask: %#"PRIx32"\n", mUsage);
+    fdprintf(fd, "Max Buffer Count: %"PRIu32"\n", mMaxBuffers);
+    fdprintf(fd, "Buffers Registered: %s\n", mRegistered ? "true" : "false");
+    fdprintf(fd, "Number of Buffers: %"PRIu32"\n", mNumBuffers);
+    for (uint32_t i = 0; i < mNumBuffers; i++) {
+        fdprintf(fd, "Buffer %"PRIu32"/%"PRIu32": %p\n", i, mNumBuffers,
+                                                                mBuffers[i]);
+    }
+}
+
 } // namespace default_camera_hal
diff --git a/modules/camera/Stream.h b/modules/camera/Stream.h
index 34abd95..5efbc52 100644
--- a/modules/camera/Stream.h
+++ b/modules/camera/Stream.h
@@ -20,6 +20,7 @@
 #include <hardware/camera3.h>
 #include <hardware/gralloc.h>
 #include <system/graphics.h>
+#include <utils/Mutex.h>
 
 namespace default_camera_hal {
 // Stream represents a single input or output stream for a camera device.
@@ -41,12 +42,15 @@
         bool isInputType();
         bool isOutputType();
         bool isRegistered();
+        const char* typeToString(int type);
+        const char* formatToString(int format);
+        void dump(int fd);
 
         // This stream is being reused. Used in stream configuration passes
         bool mReuse;
 
     private:
-        // Clean up buffer state. must be called with mMutex held.
+        // Clean up buffer state. must be called with mLock held.
         void unregisterBuffers_L();
 
         // The camera device id this stream belongs to
@@ -72,7 +76,7 @@
         // Number of buffers in mBuffers
         unsigned int mNumBuffers;
         // Lock protecting the Stream object for modifications
-        pthread_mutex_t mMutex;
+        android::Mutex mLock;
 };
 } // namespace default_camera_hal
 
diff --git a/modules/camera/VendorTags.cpp b/modules/camera/VendorTags.cpp
new file mode 100644
index 0000000..2c54648
--- /dev/null
+++ b/modules/camera/VendorTags.cpp
@@ -0,0 +1,188 @@
+/*
+ * Copyright (C) 2013 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <system/camera_metadata.h>
+#include "Metadata.h"
+
+//#define LOG_NDEBUG 0
+#define LOG_TAG "VendorTags"
+#include <cutils/log.h>
+
+#define ATRACE_TAG (ATRACE_TAG_CAMERA | ATRACE_TAG_HAL)
+#include <utils/Trace.h>
+
+#include "VendorTags.h"
+
+namespace default_camera_hal {
+
+// Internal representations of vendor tags for convenience.
+// Other classes must access this data via public interfaces.
+// Structured to be easy to extend and contain complexity.
+namespace {
+// Describes a single vendor tag entry
+struct Entry {
+    const char* name;
+    uint8_t     type;
+};
+// Describes a vendor tag section
+struct Section {
+    const char* name;
+    uint32_t start;
+    uint32_t end;
+    const Entry* tags;
+};
+
+// Entry arrays for each section
+const Entry DemoWizardry[demo_wizardry_end - demo_wizardry_start] = {
+    [demo_wizardry_dimension_size - demo_wizardry_start] =
+        {"dimensionSize",   TYPE_INT32},
+    [demo_wizardry_dimensions - demo_wizardry_start] =
+        {"dimensions",      TYPE_INT32},
+    [demo_wizardry_familiar - demo_wizardry_start] =
+        {"familiar",        TYPE_BYTE},
+    [demo_wizardry_fire - demo_wizardry_start] =
+        {"fire",            TYPE_RATIONAL}
+};
+
+const Entry DemoSorcery[demo_sorcery_end - demo_sorcery_start] = {
+    [demo_sorcery_difficulty - demo_sorcery_start] =
+        {"difficulty",      TYPE_INT64},
+    [demo_sorcery_light - demo_sorcery_start] =
+        {"light",           TYPE_BYTE}
+};
+
+const Entry DemoMagic[demo_magic_end - demo_magic_start] = {
+    [demo_magic_card_trick - demo_magic_start] =
+        {"cardTrick",       TYPE_DOUBLE},
+    [demo_magic_levitation - demo_magic_start] =
+        {"levitation",      TYPE_FLOAT}
+};
+
+// Array of all sections
+const Section DemoSections[DEMO_SECTION_COUNT] = {
+    [DEMO_WIZARDRY] = { "demo.wizardry",
+                        demo_wizardry_start,
+                        demo_wizardry_end,
+                        DemoWizardry },
+    [DEMO_SORCERY]  = { "demo.sorcery",
+                        demo_sorcery_start,
+                        demo_sorcery_end,
+                        DemoSorcery },
+    [DEMO_MAGIC]    = { "demo.magic",
+                        demo_magic_start,
+                        demo_magic_end,
+                        DemoMagic }
+};
+
+// Get a static handle to a specific vendor tag section
+const Section* getSection(uint32_t tag)
+{
+    uint32_t section = (tag - vendor_section_start) >> 16;
+
+    if (tag < vendor_section_start) {
+        ALOGE("%s: Tag 0x%x before vendor section", __func__, tag);
+        return NULL;
+    }
+
+    if (section >= DEMO_SECTION_COUNT) {
+        ALOGE("%s: Tag 0x%x after vendor section", __func__, tag);
+        return NULL;
+    }
+
+    return &DemoSections[section];
+}
+
+// Get a static handle to a specific vendor tag entry
+const Entry* getEntry(uint32_t tag)
+{
+    const Section* section = getSection(tag);
+    int index;
+
+    if (section == NULL)
+        return NULL;
+
+    if (tag >= section->end) {
+        ALOGE("%s: Tag 0x%x outside section", __func__, tag);
+        return NULL;
+    }
+
+    index = tag - section->start;
+    return &section->tags[index];
+}
+} // namespace
+
+VendorTags::VendorTags()
+  : mTagCount(0)
+{
+    for (int i = 0; i < DEMO_SECTION_COUNT; i++) {
+        mTagCount += DemoSections[i].end - DemoSections[i].start;
+    }
+}
+
+VendorTags::~VendorTags()
+{
+}
+
+int VendorTags::getTagCount(const vendor_tag_ops_t* ops)
+{
+    return mTagCount;
+}
+
+void VendorTags::getAllTags(const vendor_tag_ops_t* ops, uint32_t* tag_array)
+{
+    if (tag_array == NULL) {
+        ALOGE("%s: NULL tag_array", __func__);
+        return;
+    }
+
+    for (int i = 0; i < DEMO_SECTION_COUNT; i++) {
+        for (uint32_t tag = DemoSections[i].start;
+                tag < DemoSections[i].end; tag++) {
+            *tag_array++ = tag;
+        }
+    }
+}
+
+const char* VendorTags::getSectionName(const vendor_tag_ops_t* ops, uint32_t tag)
+{
+    const Section* section = getSection(tag);
+
+    if (section == NULL)
+        return NULL;
+
+    return section->name;
+}
+
+const char* VendorTags::getTagName(const vendor_tag_ops_t* ops, uint32_t tag)
+{
+    const Entry* entry = getEntry(tag);
+
+    if (entry == NULL)
+        return NULL;
+
+    return entry->name;
+}
+
+int VendorTags::getTagType(const vendor_tag_ops_t* ops, uint32_t tag)
+{
+    const Entry* entry = getEntry(tag);
+
+    if (entry == NULL)
+        return -1;
+
+    return entry->type;
+}
+} // namespace default_camera_hal
diff --git a/modules/camera/VendorTags.h b/modules/camera/VendorTags.h
new file mode 100644
index 0000000..ecf777e
--- /dev/null
+++ b/modules/camera/VendorTags.h
@@ -0,0 +1,76 @@
+/*
+ * Copyright (C) 2013 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef VENDOR_TAGS_H_
+#define VENDOR_TAGS_H_
+
+#include <hardware/camera_common.h>
+#include <system/camera_metadata.h>
+
+namespace default_camera_hal {
+
+// VendorTags contains all vendor-specific metadata tag functionality
+class VendorTags {
+    public:
+        VendorTags();
+        ~VendorTags();
+
+        // Vendor Tags Operations (see <hardware/camera_common.h>)
+        int getTagCount(const vendor_tag_ops_t* ops);
+        void getAllTags(const vendor_tag_ops_t* ops, uint32_t* tag_array);
+        const char* getSectionName(const vendor_tag_ops_t* ops, uint32_t tag);
+        const char* getTagName(const vendor_tag_ops_t* ops, uint32_t tag);
+        int getTagType(const vendor_tag_ops_t* ops, uint32_t tag);
+
+    private:
+        // Total number of vendor tags
+        int mTagCount;
+};
+
+// Tag sections start at the beginning of vendor tags (0x8000_0000)
+// See <system/camera_metadata.h>
+enum {
+    DEMO_WIZARDRY,
+    DEMO_SORCERY,
+    DEMO_MAGIC,
+    DEMO_SECTION_COUNT
+};
+
+const uint32_t vendor_section_start = VENDOR_SECTION_START;
+
+// Each section starts at increments of 0x1_0000
+const uint32_t demo_wizardry_start = (DEMO_WIZARDRY + VENDOR_SECTION) << 16;
+const uint32_t demo_sorcery_start  = (DEMO_SORCERY  + VENDOR_SECTION) << 16;
+const uint32_t demo_magic_start    = (DEMO_MAGIC    + VENDOR_SECTION) << 16;
+
+// Vendor Tag values, start value begins each section
+const uint32_t demo_wizardry_dimension_size = demo_wizardry_start;
+const uint32_t demo_wizardry_dimensions = demo_wizardry_start + 1;
+const uint32_t demo_wizardry_familiar = demo_wizardry_start + 2;
+const uint32_t demo_wizardry_fire = demo_wizardry_start + 3;
+const uint32_t demo_wizardry_end = demo_wizardry_start + 4;
+
+const uint32_t demo_sorcery_difficulty = demo_sorcery_start;
+const uint32_t demo_sorcery_light = demo_sorcery_start + 1;
+const uint32_t demo_sorcery_end = demo_sorcery_start + 2;
+
+const uint32_t demo_magic_card_trick = demo_magic_start;
+const uint32_t demo_magic_levitation = demo_magic_start + 1;
+const uint32_t demo_magic_end = demo_magic_start + 2;
+
+} // namespace default_camera_hal
+
+#endif // VENDOR_TAGS_H_
diff --git a/modules/fingerprint/Android.mk b/modules/fingerprint/Android.mk
new file mode 100644
index 0000000..58c0a83
--- /dev/null
+++ b/modules/fingerprint/Android.mk
@@ -0,0 +1,25 @@
+# Copyright (C) 2013 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+LOCAL_PATH := $(call my-dir)
+
+include $(CLEAR_VARS)
+
+LOCAL_MODULE := fingerprint.default
+LOCAL_MODULE_RELATIVE_PATH := hw
+LOCAL_SRC_FILES := fingerprint.c
+LOCAL_SHARED_LIBRARIES := liblog
+LOCAL_MODULE_TAGS := optional
+
+include $(BUILD_SHARED_LIBRARY)
diff --git a/modules/fingerprint/fingerprint.c b/modules/fingerprint/fingerprint.c
new file mode 100644
index 0000000..14dac12
--- /dev/null
+++ b/modules/fingerprint/fingerprint.c
@@ -0,0 +1,90 @@
+/*
+ * Copyright (C) 2014 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#define LOG_TAG "FingerprintHal"
+
+#include <errno.h>
+#include <string.h>
+#include <cutils/log.h>
+#include <hardware/hardware.h>
+#include <hardware/fingerprint.h>
+
+static int fingerprint_close(hw_device_t *dev)
+{
+    if (dev) {
+        free(dev);
+        return 0;
+    } else {
+        return -1;
+    }
+}
+
+static int fingerprint_enroll(struct fingerprint_device __unused *dev,
+                                uint32_t __unused timeout_sec) {
+    return FINGERPRINT_ERROR;
+}
+
+static int fingerprint_remove(struct fingerprint_device __unused *dev,
+                                uint32_t __unused fingerprint_id) {
+    return FINGERPRINT_ERROR;
+}
+
+static int set_notify_callback(struct fingerprint_device *dev,
+                                fingerprint_notify_t notify) {
+    /* Decorate with locks */
+    dev->notify = notify;
+    return FINGERPRINT_ERROR;
+}
+
+static int fingerprint_open(const hw_module_t* module, const char __unused *id,
+                            hw_device_t** device)
+{
+    if (device == NULL) {
+        ALOGE("NULL device on open");
+        return -EINVAL;
+    }
+
+    fingerprint_device_t *dev = malloc(sizeof(fingerprint_device_t));
+    memset(dev, 0, sizeof(fingerprint_device_t));
+
+    dev->common.tag = HARDWARE_DEVICE_TAG;
+    dev->common.version = HARDWARE_MODULE_API_VERSION(1, 0);
+    dev->common.module = (struct hw_module_t*) module;
+    dev->common.close = fingerprint_close;
+
+    dev->enroll = fingerprint_enroll;
+    dev->remove = fingerprint_remove;
+    dev->set_notify = set_notify_callback;
+    dev->notify = NULL;
+
+    *device = (hw_device_t*) dev;
+    return 0;
+}
+
+static struct hw_module_methods_t fingerprint_module_methods = {
+    .open = fingerprint_open,
+};
+
+fingerprint_module_t HAL_MODULE_INFO_SYM = {
+    .common = {
+        .tag                = HARDWARE_MODULE_TAG,
+        .module_api_version = FINGERPRINT_MODULE_API_VERSION_1_0,
+        .hal_api_version    = HARDWARE_HAL_API_VERSION,
+        .id                 = FINGERPRINT_HARDWARE_MODULE_ID,
+        .name               = "Demo Fingerprint HAL",
+        .author             = "The Android Open Source Project",
+        .methods            = &fingerprint_module_methods,
+    },
+};
diff --git a/modules/tv_input/Android.mk b/modules/tv_input/Android.mk
new file mode 100644
index 0000000..e8aa7fc
--- /dev/null
+++ b/modules/tv_input/Android.mk
@@ -0,0 +1,24 @@
+# Copyright (C) 2014 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+LOCAL_PATH := $(call my-dir)
+
+include $(CLEAR_VARS)
+
+LOCAL_MODULE_RELATIVE_PATH := hw
+LOCAL_SHARED_LIBRARIES := libcutils liblog
+LOCAL_SRC_FILES := tv_input.cpp
+LOCAL_MODULE := tv_input.default
+LOCAL_MODULE_TAGS := optional
+include $(BUILD_SHARED_LIBRARY)
diff --git a/modules/tv_input/tv_input.cpp b/modules/tv_input/tv_input.cpp
new file mode 100644
index 0000000..bc02786
--- /dev/null
+++ b/modules/tv_input/tv_input.cpp
@@ -0,0 +1,141 @@
+/*
+ * Copyright 2014 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <fcntl.h>
+#include <errno.h>
+
+#include <cutils/log.h>
+#include <cutils/native_handle.h>
+
+#include <hardware/tv_input.h>
+
+/*****************************************************************************/
+
+typedef struct tv_input_private {
+    tv_input_device_t device;
+
+    // Callback related data
+    const tv_input_callback_ops_t* callback;
+    void* callback_data;
+} tv_input_private_t;
+
+static int tv_input_device_open(const struct hw_module_t* module,
+        const char* name, struct hw_device_t** device);
+
+static struct hw_module_methods_t tv_input_module_methods = {
+    open: tv_input_device_open
+};
+
+tv_input_module_t HAL_MODULE_INFO_SYM = {
+    common: {
+        tag: HARDWARE_MODULE_TAG,
+        version_major: 0,
+        version_minor: 1,
+        id: TV_INPUT_HARDWARE_MODULE_ID,
+        name: "Sample TV input module",
+        author: "The Android Open Source Project",
+        methods: &tv_input_module_methods,
+    }
+};
+
+/*****************************************************************************/
+
+static int tv_input_initialize(struct tv_input_device* dev,
+        const tv_input_callback_ops_t* callback, void* data)
+{
+    if (dev == NULL || callback == NULL) {
+        return -EINVAL;
+    }
+    tv_input_private_t* priv = (tv_input_private_t*)dev;
+    if (priv->callback != NULL) {
+        return -EEXIST;
+    }
+
+    priv->callback = callback;
+    priv->callback_data = data;
+
+    return 0;
+}
+
+static int tv_input_get_stream_configurations(
+        const struct tv_input_device*, int, int*, const tv_stream_config_t**)
+{
+    return -EINVAL;
+}
+
+static int tv_input_open_stream(struct tv_input_device*, int, tv_stream_t*)
+{
+    return -EINVAL;
+}
+
+static int tv_input_close_stream(struct tv_input_device*, int, int)
+{
+    return -EINVAL;
+}
+
+static int tv_input_request_capture(
+        struct tv_input_device*, int, int, buffer_handle_t, uint32_t)
+{
+    return -EINVAL;
+}
+
+static int tv_input_cancel_capture(struct tv_input_device*, int, int, uint32_t)
+{
+    return -EINVAL;
+}
+
+/*****************************************************************************/
+
+static int tv_input_device_close(struct hw_device_t *dev)
+{
+    tv_input_private_t* priv = (tv_input_private_t*)dev;
+    if (priv) {
+        free(priv);
+    }
+    return 0;
+}
+
+/*****************************************************************************/
+
+static int tv_input_device_open(const struct hw_module_t* module,
+        const char* name, struct hw_device_t** device)
+{
+    int status = -EINVAL;
+    if (!strcmp(name, TV_INPUT_DEFAULT_DEVICE)) {
+        tv_input_private_t* dev = (tv_input_private_t*)malloc(sizeof(*dev));
+
+        /* initialize our state here */
+        memset(dev, 0, sizeof(*dev));
+
+        /* initialize the procs */
+        dev->device.common.tag = HARDWARE_DEVICE_TAG;
+        dev->device.common.version = TV_INPUT_DEVICE_API_VERSION_0_1;
+        dev->device.common.module = const_cast<hw_module_t*>(module);
+        dev->device.common.close = tv_input_device_close;
+
+        dev->device.initialize = tv_input_initialize;
+        dev->device.get_stream_configurations =
+                tv_input_get_stream_configurations;
+        dev->device.open_stream = tv_input_open_stream;
+        dev->device.close_stream = tv_input_close_stream;
+        dev->device.request_capture = tv_input_request_capture;
+        dev->device.cancel_capture = tv_input_cancel_capture;
+
+        *device = &dev->device.common;
+        status = 0;
+    }
+    return status;
+}
diff --git a/modules/usbaudio/audio_hw.c b/modules/usbaudio/audio_hw.c
index 24a2d63..7b2a4f1 100644
--- a/modules/usbaudio/audio_hw.c
+++ b/modules/usbaudio/audio_hw.c
@@ -18,12 +18,13 @@
 /*#define LOG_NDEBUG 0*/
 
 #include <errno.h>
+#include <inttypes.h>
 #include <pthread.h>
 #include <stdint.h>
-#include <sys/time.h>
 #include <stdlib.h>
+#include <sys/time.h>
 
-#include <cutils/log.h>
+#include <log/log.h>
 #include <cutils/str_parms.h>
 #include <cutils/properties.h>
 
@@ -33,65 +34,398 @@
 
 #include <tinyalsa/asoundlib.h>
 
-struct pcm_config pcm_config = {
+/* This is the default configuration to hand to The Framework on the initial
+ * adev_open_output_stream(). Actual device attributes will be used on the subsequent
+ * adev_open_output_stream() after the card and device number have been set in out_set_parameters()
+ */
+#define OUT_PERIOD_SIZE 1024
+#define OUT_PERIOD_COUNT 4
+#define OUT_SAMPLING_RATE 44100
+
+struct pcm_config default_alsa_out_config = {
     .channels = 2,
-    .rate = 44100,
-    .period_size = 1024,
-    .period_count = 4,
+    .rate = OUT_SAMPLING_RATE,
+    .period_size = OUT_PERIOD_SIZE,
+    .period_count = OUT_PERIOD_COUNT,
     .format = PCM_FORMAT_S16_LE,
 };
 
+/*
+ * Input defaults.  See comment above.
+ */
+#define IN_PERIOD_SIZE 1024
+#define IN_PERIOD_COUNT 4
+#define IN_SAMPLING_RATE 44100
+
+struct pcm_config default_alsa_in_config = {
+    .channels = 2,
+    .rate = IN_SAMPLING_RATE,
+    .period_size = IN_PERIOD_SIZE,
+    .period_count = IN_PERIOD_COUNT,
+    .format = PCM_FORMAT_S16_LE,
+    .start_threshold = 1,
+    .stop_threshold = (IN_PERIOD_SIZE * IN_PERIOD_COUNT),
+};
+
 struct audio_device {
     struct audio_hw_device hw_device;
 
     pthread_mutex_t lock; /* see note below on mutex acquisition order */
-    int card;
-    int device;
+
+    /* output */
+    int out_card;
+    int out_device;
+
+    /* input */
+    int in_card;
+    int in_device;
+
     bool standby;
 };
 
 struct stream_out {
     struct audio_stream_out stream;
 
+    pthread_mutex_t lock;               /* see note below on mutex acquisition order */
+    struct pcm *pcm;                    /* state of the stream */
+    bool standby;
+
+    struct audio_device *dev;           /* hardware information */
+
+    void * conversion_buffer;           /* any conversions are put into here
+                                         * they could come from here too if
+                                         * there was a previous conversion */
+    size_t conversion_buffer_size;      /* in bytes */
+};
+
+/*
+ * Output Configuration Cache
+ * FIXME(pmclean) This is not reentrant. Should probably be moved into the stream structure
+ * but that will involve changes in The Framework.
+ */
+static struct pcm_config cached_output_hardware_config;
+static bool output_hardware_config_is_cached = false;
+
+struct stream_in {
+    struct audio_stream_in stream;
+
     pthread_mutex_t lock; /* see note below on mutex acquisition order */
     struct pcm *pcm;
     bool standby;
 
     struct audio_device *dev;
+
+    struct audio_config hal_pcm_config;
+
+//    struct resampler_itfe *resampler;
+//    struct resampler_buffer_provider buf_provider;
+
+    int read_status;
+
+    // We may need to read more data from the device in order to data reduce to 16bit, 4chan */
+    void * conversion_buffer;           /* any conversions are put into here
+                                         * they could come from here too if
+                                         * there was a previous conversion */
+    size_t conversion_buffer_size;      /* in bytes */
 };
 
+/*
+ * Input Configuration Cache
+ * FIXME(pmclean) This is not reentrant. Should probably be moved into the stream structure
+ * but that will involve changes in The Framework.
+ */
+static struct pcm_config cached_input_hardware_config;
+static bool input_hardware_config_is_cached = false;
+
+/*
+ * Utility
+ */
+/*
+ * Translates from ALSA format ID to ANDROID_AUDIO_CORE format ID
+ * (see master/system/core/include/core/audio.h)
+ * TODO(pmclean) Replace with audio_format_from_pcm_format() (in hardware/audio_alsaops.h).
+ *   post-integration.
+ */
+static audio_format_t alsa_to_fw_format_id(int alsa_fmt_id)
+{
+    switch (alsa_fmt_id) {
+    case PCM_FORMAT_S8:
+        return AUDIO_FORMAT_PCM_8_BIT;
+
+    case PCM_FORMAT_S24_3LE:
+        //TODO(pmclean) make sure this is the 'right' sort of 24-bit
+        return AUDIO_FORMAT_PCM_8_24_BIT;
+
+    case PCM_FORMAT_S32_LE:
+    case PCM_FORMAT_S24_LE:
+        return AUDIO_FORMAT_PCM_32_BIT;
+    }
+
+    return AUDIO_FORMAT_PCM_16_BIT;
+}
+
+/*
+ * Data Conversions
+ */
+/*
+ * Convert a buffer of PCM16LE samples to packed (3-byte) PCM24LE samples.
+ *   in_buff points to the buffer of PCM16 samples
+ *   num_in_samples size of input buffer in SAMPLES
+ *   out_buff points to the buffer to receive converted PCM24 LE samples.
+ * returns
+ *   the number of BYTES of output data.
+ * We are doing this since we *always* present to The Framework as A PCM16LE device, but need to
+ * support PCM24_3LE (24-bit, packed).
+ * NOTE:
+ *   We're just filling the low-order byte of the PCM24LE samples with 0.
+ *   This conversion is safe to do in-place (in_buff == out_buff).
+ * TODO(pmclean, hung) Move this to a utilities module.
+ */
+static size_t convert_16_to_24_3(const short * in_buff, size_t num_in_samples, unsigned char * out_buff) {
+    /*
+     * Move from back to front so that the conversion can be done in-place
+     * i.e. in_buff == out_buff
+     */
+    int in_buff_size_in_bytes = num_in_samples * 2;
+    /* we need 3 bytes in the output for every 2 bytes in the input */
+    int out_buff_size_in_bytes = ((3 * in_buff_size_in_bytes) / 2);
+    unsigned char* dst_ptr = out_buff + out_buff_size_in_bytes - 1;
+    size_t src_smpl_index;
+    const unsigned char* src_ptr = ((const unsigned char *)in_buff) + in_buff_size_in_bytes - 1;
+    for (src_smpl_index = 0; src_smpl_index < num_in_samples; src_smpl_index++) {
+        *dst_ptr-- = *src_ptr--; /* hi-byte */
+        *dst_ptr-- = *src_ptr--; /* low-byte */
+        /*TODO(pmclean) - we might want to consider dithering the lowest byte. */
+        *dst_ptr-- = 0;          /* zero-byte */
+    }
+
+    /* return number of *bytes* generated */
+    return out_buff_size_in_bytes;
+}
+
+/*
+ * Convert a buffer of packed (3-byte) PCM24LE samples to PCM16LE samples.
+ *   in_buff points to the buffer of PCM24LE samples
+ *   num_in_samples size of input buffer in SAMPLES
+ *   out_buff points to the buffer to receive converted PCM16LE LE samples.
+ * returns
+ *   the number of BYTES of output data.
+ * We are doing this since we *always* present to The Framework as A PCM16LE device, but need to
+ * support PCM24_3LE (24-bit, packed).
+ * NOTE:
+ *   We're just filling the low-order byte of the PCM24LE samples with 0.
+ *   This conversion is safe to do in-place (in_buff == out_buff).
+ * TODO(pmclean, hung) Move this to a utilities module.
+ */
+static size_t convert_24_3_to_16(const unsigned char * in_buff, size_t num_in_samples, short * out_buff) {
+    /*
+     * Move from front to back so that the conversion can be done in-place
+     * i.e. in_buff == out_buff
+     */
+    /* we need 2 bytes in the output for every 3 bytes in the input */
+    unsigned char* dst_ptr = (unsigned char*)out_buff;
+    const unsigned char* src_ptr = in_buff;
+    size_t src_smpl_index;
+    for (src_smpl_index = 0; src_smpl_index < num_in_samples; src_smpl_index++) {
+        src_ptr++;               /* lowest-(skip)-byte */
+        *dst_ptr++ = *src_ptr++; /* low-byte */
+        *dst_ptr++ = *src_ptr++; /* high-byte */
+    }
+
+    /* return number of *bytes* generated: */
+    return num_in_samples * 2;
+}
+
+/*
+ * Convert a buffer of N-channel, interleaved PCM16 samples to M-channel PCM16 channels
+ * (where N < M).
+ *   in_buff points to the buffer of PCM16 samples
+ *   in_buff_channels Specifies the number of channels in the input buffer.
+ *   out_buff points to the buffer to receive converted PCM16 samples.
+ *   out_buff_channels Specifies the number of channels in the output buffer.
+ *   num_in_samples size of input buffer in SAMPLES
+ * returns
+ *   the number of BYTES of output data.
+ * NOTE
+ *   channels > N are filled with silence.
+ *   This conversion is safe to do in-place (in_buff == out_buff)
+ * We are doing this since we *always* present to The Framework as STEREO device, but need to
+ * support 4-channel devices.
+ * TODO(pmclean, hung) Move this to a utilities module.
+ */
+static size_t expand_channels_16(const short* in_buff, int in_buff_chans,
+                                 short* out_buff, int out_buff_chans,
+                                 size_t num_in_samples) {
+    /*
+     * Move from back to front so that the conversion can be done in-place
+     * i.e. in_buff == out_buff
+     * NOTE: num_in_samples * out_buff_channels must be an even multiple of in_buff_chans
+     */
+    int num_out_samples = (num_in_samples * out_buff_chans)/in_buff_chans;
+
+    short* dst_ptr = out_buff + num_out_samples - 1;
+    size_t src_index;
+    const short* src_ptr = in_buff + num_in_samples - 1;
+    int num_zero_chans = out_buff_chans - in_buff_chans;
+    for (src_index = 0; src_index < num_in_samples; src_index += in_buff_chans) {
+        int dst_offset;
+        for(dst_offset = 0; dst_offset < num_zero_chans; dst_offset++) {
+            *dst_ptr-- = 0;
+        }
+        for(; dst_offset < out_buff_chans; dst_offset++) {
+            *dst_ptr-- = *src_ptr--;
+        }
+    }
+
+    /* return number of *bytes* generated */
+    return num_out_samples * sizeof(short);
+}
+
+/*
+ * Convert a buffer of N-channel, interleaved PCM16 samples to M-channel PCM16 channels
+ * (where N > M).
+ *   in_buff points to the buffer of PCM16 samples
+ *   in_buff_channels Specifies the number of channels in the input buffer.
+ *   out_buff points to the buffer to receive converted PCM16 samples.
+ *   out_buff_channels Specifies the number of channels in the output buffer.
+ *   num_in_samples size of input buffer in SAMPLES
+ * returns
+ *   the number of BYTES of output data.
+ * NOTE
+ *   channels > N are thrown away.
+ *   This conversion is safe to do in-place (in_buff == out_buff)
+ * We are doing this since we *always* present to The Framework as STEREO device, but need to
+ * support 4-channel devices.
+ * TODO(pmclean, hung) Move this to a utilities module.
+ */
+static size_t contract_channels_16(short* in_buff, int in_buff_chans,
+                                   short* out_buff, int out_buff_chans,
+                                   size_t num_in_samples) {
+    /*
+     * Move from front to back so that the conversion can be done in-place
+     * i.e. in_buff == out_buff
+     * NOTE: num_in_samples * out_buff_channels must be an even multiple of in_buff_chans
+     */
+    int num_out_samples = (num_in_samples * out_buff_chans)/in_buff_chans;
+
+    int num_skip_samples = in_buff_chans - out_buff_chans;
+
+    short* dst_ptr = out_buff;
+    short* src_ptr = in_buff;
+    size_t src_index;
+    for (src_index = 0; src_index < num_in_samples; src_index += in_buff_chans) {
+        int dst_offset;
+        for(dst_offset = 0; dst_offset < out_buff_chans; dst_offset++) {
+            *dst_ptr++ = *src_ptr++;
+        }
+        src_ptr += num_skip_samples;
+    }
+
+    /* return number of *bytes* generated */
+    return num_out_samples * sizeof(short);
+}
+
+/*
+ * ALSA Utilities
+ */
+/*
+ * gets the ALSA bit-format flag from a bits-per-sample value.
+ * TODO(pmclean, hung) Move this to a utilities module.
+ */
+static int bits_to_alsa_format(unsigned int bits_per_sample, int default_format)
+{
+    enum pcm_format format;
+    for (format = PCM_FORMAT_S16_LE; format < PCM_FORMAT_MAX; format++) {
+        if (pcm_format_to_bits(format) == bits_per_sample) {
+            return format;
+        }
+    }
+    return default_format;
+}
+
+static void log_pcm_params(struct pcm_params * alsa_hw_params) {
+    ALOGV("usb:audio_hw - PCM_PARAM_SAMPLE_BITS min:%u, max:%u",
+          pcm_params_get_min(alsa_hw_params, PCM_PARAM_SAMPLE_BITS),
+          pcm_params_get_max(alsa_hw_params, PCM_PARAM_SAMPLE_BITS));
+    ALOGV("usb:audio_hw - PCM_PARAM_FRAME_BITS min:%u, max:%u",
+          pcm_params_get_min(alsa_hw_params, PCM_PARAM_FRAME_BITS),
+          pcm_params_get_max(alsa_hw_params, PCM_PARAM_FRAME_BITS));
+    ALOGV("usb:audio_hw - PCM_PARAM_CHANNELS min:%u, max:%u",
+          pcm_params_get_min(alsa_hw_params, PCM_PARAM_CHANNELS),
+          pcm_params_get_max(alsa_hw_params, PCM_PARAM_CHANNELS));
+    ALOGV("usb:audio_hw - PCM_PARAM_RATE min:%u, max:%u",
+          pcm_params_get_min(alsa_hw_params, PCM_PARAM_RATE),
+          pcm_params_get_max(alsa_hw_params, PCM_PARAM_RATE));
+    ALOGV("usb:audio_hw - PCM_PARAM_PERIOD_TIME min:%u, max:%u",
+          pcm_params_get_min(alsa_hw_params, PCM_PARAM_PERIOD_TIME),
+          pcm_params_get_max(alsa_hw_params, PCM_PARAM_PERIOD_TIME));
+    ALOGV("usb:audio_hw - PCM_PARAM_PERIOD_SIZE min:%u, max:%u",
+          pcm_params_get_min(alsa_hw_params, PCM_PARAM_PERIOD_SIZE),
+          pcm_params_get_max(alsa_hw_params, PCM_PARAM_PERIOD_SIZE));
+    ALOGV("usb:audio_hw - PCM_PARAM_PERIOD_BYTES min:%u, max:%u",
+          pcm_params_get_min(alsa_hw_params, PCM_PARAM_PERIOD_BYTES),
+          pcm_params_get_max(alsa_hw_params, PCM_PARAM_PERIOD_BYTES));
+    ALOGV("usb:audio_hw - PCM_PARAM_PERIODS min:%u, max:%u",
+          pcm_params_get_min(alsa_hw_params, PCM_PARAM_PERIODS),
+          pcm_params_get_max(alsa_hw_params, PCM_PARAM_PERIODS));
+    ALOGV("usb:audio_hw - PCM_PARAM_BUFFER_TIME min:%u, max:%u",
+          pcm_params_get_min(alsa_hw_params, PCM_PARAM_BUFFER_TIME),
+          pcm_params_get_max(alsa_hw_params, PCM_PARAM_BUFFER_TIME));
+    ALOGV("usb:audio_hw - PCM_PARAM_BUFFER_SIZE min:%u, max:%u",
+          pcm_params_get_min(alsa_hw_params, PCM_PARAM_BUFFER_SIZE),
+          pcm_params_get_max(alsa_hw_params, PCM_PARAM_BUFFER_SIZE));
+    ALOGV("usb:audio_hw - PCM_PARAM_BUFFER_BYTES min:%u, max:%u",
+          pcm_params_get_min(alsa_hw_params, PCM_PARAM_BUFFER_BYTES),
+          pcm_params_get_max(alsa_hw_params, PCM_PARAM_BUFFER_BYTES));
+    ALOGV("usb:audio_hw - PCM_PARAM_TICK_TIME min:%u, max:%u",
+          pcm_params_get_min(alsa_hw_params, PCM_PARAM_TICK_TIME),
+          pcm_params_get_max(alsa_hw_params, PCM_PARAM_TICK_TIME));
+}
+
+/*
+ * Reads and decodes configuration info from the specified ALSA card/device
+ */
+static int read_alsa_device_config(int card, int device, int io_type, struct pcm_config * config)
+{
+    ALOGV("usb:audio_hw - read_alsa_device_config(c:%d d:%d t:0x%X)",card, device, io_type);
+
+    if (card < 0 || device < 0) {
+        return -EINVAL;
+    }
+
+    struct pcm_params * alsa_hw_params = pcm_params_get(card, device, io_type);
+    if (alsa_hw_params == NULL) {
+        return -EINVAL;
+    }
+
+    /*
+     * This Logging will be useful when testing new USB devices.
+     */
+    /* log_pcm_params(alsa_hw_params); */
+
+    config->channels = pcm_params_get_min(alsa_hw_params, PCM_PARAM_CHANNELS);
+    config->rate = pcm_params_get_min(alsa_hw_params, PCM_PARAM_RATE);
+    config->period_size = pcm_params_get_max(alsa_hw_params, PCM_PARAM_PERIODS);
+    config->period_count = pcm_params_get_min(alsa_hw_params, PCM_PARAM_PERIODS);
+
+    unsigned int bits_per_sample = pcm_params_get_min(alsa_hw_params, PCM_PARAM_SAMPLE_BITS);
+    config->format = bits_to_alsa_format(bits_per_sample, PCM_FORMAT_S16_LE);
+
+    return 0;
+}
+
+/*
+ * HAl Functions
+ */
 /**
  * NOTE: when multiple mutexes have to be acquired, always respect the
  * following order: hw device > out stream
  */
 
 /* Helper functions */
-
-/* must be called with hw device and output stream mutexes locked */
-static int start_output_stream(struct stream_out *out)
-{
-    struct audio_device *adev = out->dev;
-    int i;
-
-    if ((adev->card < 0) || (adev->device < 0))
-        return -EINVAL;
-
-    out->pcm = pcm_open(adev->card, adev->device, PCM_OUT, &pcm_config);
-
-    if (out->pcm && !pcm_is_ready(out->pcm)) {
-        ALOGE("pcm_open() failed: %s", pcm_get_error(out->pcm));
-        pcm_close(out->pcm);
-        return -ENOMEM;
-    }
-
-    return 0;
-}
-
-/* API functions */
-
 static uint32_t out_get_sample_rate(const struct audio_stream *stream)
 {
-    return pcm_config.rate;
+    return cached_output_hardware_config.rate;
 }
 
 static int out_set_sample_rate(struct audio_stream *stream, uint32_t rate)
@@ -101,17 +435,22 @@
 
 static size_t out_get_buffer_size(const struct audio_stream *stream)
 {
-    return pcm_config.period_size *
-           audio_stream_frame_size((struct audio_stream *)stream);
+    return cached_output_hardware_config.period_size * audio_stream_frame_size(stream);
 }
 
 static uint32_t out_get_channels(const struct audio_stream *stream)
 {
+    // Always Stero for now. We will do *some* conversions in this HAL.
+    // TODO(pmclean) When AudioPolicyManager & AudioFlinger supports arbitrary channels
+    // rewrite this to return the ACTUAL channel format
     return AUDIO_CHANNEL_OUT_STEREO;
 }
 
 static audio_format_t out_get_format(const struct audio_stream *stream)
 {
+    // Always return 16-bit PCM. We will do *some* conversions in this HAL.
+    // TODO(pmclean) When AudioPolicyManager & AudioFlinger supports arbitrary PCM formats
+    // rewrite this to return the ACTUAL data format
     return AUDIO_FORMAT_PCM_16_BIT;
 }
 
@@ -146,49 +485,158 @@
 
 static int out_set_parameters(struct audio_stream *stream, const char *kvpairs)
 {
+    ALOGV("usb:audio_hw::out out_set_parameters() keys:%s", kvpairs);
+
     struct stream_out *out = (struct stream_out *)stream;
     struct audio_device *adev = out->dev;
     struct str_parms *parms;
     char value[32];
-    int ret;
+    int param_val;
     int routing = 0;
+    int ret_value = 0;
 
     parms = str_parms_create_str(kvpairs);
     pthread_mutex_lock(&adev->lock);
 
-    ret = str_parms_get_str(parms, "card", value, sizeof(value));
-    if (ret >= 0)
-        adev->card = atoi(value);
+    bool recache_device_params = false;
+    param_val = str_parms_get_str(parms, "card", value, sizeof(value));
+    if (param_val >= 0) {
+        adev->out_card = atoi(value);
+        recache_device_params = true;
+    }
 
-    ret = str_parms_get_str(parms, "device", value, sizeof(value));
-    if (ret >= 0)
-        adev->device = atoi(value);
+    param_val = str_parms_get_str(parms, "device", value, sizeof(value));
+    if (param_val >= 0) {
+        adev->out_device = atoi(value);
+        recache_device_params = true;
+    }
+
+    if (recache_device_params && adev->out_card >= 0 && adev->out_device >= 0) {
+        ret_value = read_alsa_device_config(adev->out_card, adev->out_device, PCM_OUT,
+                                            &cached_output_hardware_config);
+        output_hardware_config_is_cached = (ret_value == 0);
+    }
 
     pthread_mutex_unlock(&adev->lock);
     str_parms_destroy(parms);
 
-    return 0;
+    return ret_value;
 }
 
+//TODO(pmclean) it seems like both out_get_parameters() and in_get_parameters()
+// could be written in terms of a get_device_parameters(io_type)
+
 static char * out_get_parameters(const struct audio_stream *stream, const char *keys)
 {
-    return strdup("");
+    ALOGV("usb:audio_hw::out out_get_parameters() keys:%s", keys);
+
+    struct stream_out *out = (struct stream_out *) stream;
+    struct audio_device *adev = out->dev;
+
+    if (adev->out_card < 0 || adev->out_device < 0)
+        return strdup("");
+
+    unsigned min, max;
+
+    struct str_parms *query = str_parms_create_str(keys);
+    struct str_parms *result = str_parms_create();
+
+    int num_written = 0;
+    char buffer[256];
+    int buffer_size = sizeof(buffer) / sizeof(buffer[0]);
+    char* result_str = NULL;
+
+    struct pcm_params * alsa_hw_params = pcm_params_get(adev->out_card, adev->out_device, PCM_OUT);
+
+    // These keys are from hardware/libhardware/include/audio.h
+    // supported sample rates
+    if (str_parms_has_key(query, AUDIO_PARAMETER_STREAM_SUP_SAMPLING_RATES)) {
+        // pcm_hw_params doesn't have a list of supported samples rates, just a min and a max, so
+        // if they are different, return a list containing those two values, otherwise just the one.
+        min = pcm_params_get_min(alsa_hw_params, PCM_PARAM_RATE);
+        max = pcm_params_get_max(alsa_hw_params, PCM_PARAM_RATE);
+        num_written = snprintf(buffer, buffer_size, "%u", min);
+        if (min != max) {
+            snprintf(buffer + num_written, buffer_size - num_written, "|%u", max);
+        }
+        str_parms_add_str(result, AUDIO_PARAMETER_STREAM_SUP_SAMPLING_RATES,
+                          buffer);
+    }  // AUDIO_PARAMETER_STREAM_SUP_SAMPLING_RATES
+
+    // supported channel counts
+    if (str_parms_has_key(query, AUDIO_PARAMETER_STREAM_SUP_CHANNELS)) {
+        // Similarly for output channels count
+        min = pcm_params_get_min(alsa_hw_params, PCM_PARAM_CHANNELS);
+        max = pcm_params_get_max(alsa_hw_params, PCM_PARAM_CHANNELS);
+        num_written = snprintf(buffer, buffer_size, "%u", min);
+        if (min != max) {
+            snprintf(buffer + num_written, buffer_size - num_written, "|%u", max);
+        }
+        str_parms_add_str(result, AUDIO_PARAMETER_STREAM_SUP_CHANNELS, buffer);
+    }  // AUDIO_PARAMETER_STREAM_SUP_CHANNELS
+
+    // supported sample formats
+    if (str_parms_has_key(query, AUDIO_PARAMETER_STREAM_SUP_FORMATS)) {
+        // Similarly for output channels count
+        //TODO(pmclean): this is wrong.
+        min = pcm_params_get_min(alsa_hw_params, PCM_PARAM_SAMPLE_BITS);
+        max = pcm_params_get_max(alsa_hw_params, PCM_PARAM_SAMPLE_BITS);
+        num_written = snprintf(buffer, buffer_size, "%u", min);
+        if (min != max) {
+            snprintf(buffer + num_written, buffer_size - num_written, "|%u", max);
+        }
+        str_parms_add_str(result, AUDIO_PARAMETER_STREAM_SUP_FORMATS, buffer);
+    }  // AUDIO_PARAMETER_STREAM_SUP_FORMATS
+
+    result_str = str_parms_to_str(result);
+
+    // done with these...
+    str_parms_destroy(query);
+    str_parms_destroy(result);
+
+    return result_str;
 }
 
 static uint32_t out_get_latency(const struct audio_stream_out *stream)
 {
-    return (pcm_config.period_size * pcm_config.period_count * 1000) /
-            out_get_sample_rate(&stream->common);
+    struct stream_out *out = (struct stream_out *) stream;
+
+    //TODO(pmclean): Do we need a term here for the USB latency
+    // (as reported in the USB descriptors)?
+    uint32_t latency = (cached_output_hardware_config.period_size
+            * cached_output_hardware_config.period_count * 1000) / out_get_sample_rate(&stream->common);
+    return latency;
 }
 
-static int out_set_volume(struct audio_stream_out *stream, float left,
-                          float right)
+static int out_set_volume(struct audio_stream_out *stream, float left, float right)
 {
     return -ENOSYS;
 }
 
-static ssize_t out_write(struct audio_stream_out *stream, const void* buffer,
-                         size_t bytes)
+/* must be called with hw device and output stream mutexes locked */
+static int start_output_stream(struct stream_out *out)
+{
+    struct audio_device *adev = out->dev;
+    int return_val = 0;
+
+    ALOGV("usb:audio_hw::out start_output_stream(card:%d device:%d)",
+          adev->out_card, adev->out_device);
+
+    out->pcm = pcm_open(adev->out_card, adev->out_device, PCM_OUT, &cached_output_hardware_config);
+    if (out->pcm == NULL) {
+        return -ENOMEM;
+    }
+
+    if (out->pcm && !pcm_is_ready(out->pcm)) {
+        ALOGE("audio_hw audio_hw pcm_open() failed: %s", pcm_get_error(out->pcm));
+        pcm_close(out->pcm);
+        return -ENOMEM;
+    }
+
+    return 0;
+}
+
+static ssize_t out_write(struct audio_stream_out *stream, const void* buffer, size_t bytes)
 {
     int ret;
     struct stream_out *out = (struct stream_out *)stream;
@@ -203,7 +651,59 @@
         out->standby = false;
     }
 
-    pcm_write(out->pcm, (void *)buffer, bytes);
+    // Setup conversion buffer
+    // compute maximum potential buffer size.
+    // * 2 for stereo -> quad conversion
+    // * 3/2 for 16bit -> 24 bit conversion
+    size_t required_conversion_buffer_size = (bytes * 3 * 2) / 2;
+    if (required_conversion_buffer_size > out->conversion_buffer_size) {
+        //TODO(pmclean) - remove this when AudioPolicyManger/AudioFlinger support arbitrary formats
+        // (and do these conversions themselves)
+        out->conversion_buffer_size = required_conversion_buffer_size;
+        out->conversion_buffer = realloc(out->conversion_buffer, out->conversion_buffer_size);
+    }
+
+    const void * write_buff = buffer;
+    int num_write_buff_bytes = bytes;
+
+    /*
+     * Num Channels conversion
+     */
+    int num_device_channels = cached_output_hardware_config.channels;
+    int num_req_channels = 2; /* always, for now */
+    if (num_device_channels != num_req_channels) {
+        num_write_buff_bytes =
+                expand_channels_16(write_buff, num_req_channels,
+                                   out->conversion_buffer, num_device_channels,
+                                   num_write_buff_bytes / sizeof(short));
+        write_buff = out->conversion_buffer;
+    }
+
+    /*
+     *  16 vs 24-bit logic here
+     */
+    switch (cached_output_hardware_config.format) {
+    case PCM_FORMAT_S16_LE:
+        // the output format is the same as the input format, so just write it out
+        break;
+
+    case PCM_FORMAT_S24_3LE:
+        // 16-bit LE2 - 24-bit LE3
+        num_write_buff_bytes = convert_16_to_24_3(write_buff,
+                                                  num_write_buff_bytes / sizeof(short),
+                                                  out->conversion_buffer);
+        write_buff = out->conversion_buffer;
+        break;
+
+    default:
+        // hmmmmm.....
+        ALOGV("usb:Unknown Format!!!");
+        break;
+    }
+
+    if (write_buff != NULL && num_write_buff_bytes != 0) {
+        pcm_write(out->pcm, write_buff, num_write_buff_bytes);
+    }
 
     pthread_mutex_unlock(&out->lock);
     pthread_mutex_unlock(&out->dev->lock);
@@ -221,8 +721,7 @@
     return bytes;
 }
 
-static int out_get_render_position(const struct audio_stream_out *stream,
-                                   uint32_t *dsp_frames)
+static int out_get_render_position(const struct audio_stream_out *stream, uint32_t *dsp_frames)
 {
     return -EINVAL;
 }
@@ -237,8 +736,7 @@
     return 0;
 }
 
-static int out_get_next_write_timestamp(const struct audio_stream_out *stream,
-                                        int64_t *timestamp)
+static int out_get_next_write_timestamp(const struct audio_stream_out *stream, int64_t *timestamp)
 {
     return -EINVAL;
 }
@@ -250,14 +748,18 @@
                                    struct audio_config *config,
                                    struct audio_stream_out **stream_out)
 {
+    ALOGV("usb:audio_hw::out adev_open_output_stream() handle:0x%X, device:0x%X, flags:0x%X",
+          handle, devices, flags);
+
     struct audio_device *adev = (struct audio_device *)dev;
+
     struct stream_out *out;
-    int ret;
 
     out = (struct stream_out *)calloc(1, sizeof(struct stream_out));
     if (!out)
         return -ENOMEM;
 
+    // setup function pointers
     out->stream.common.get_sample_rate = out_get_sample_rate;
     out->stream.common.set_sample_rate = out_set_sample_rate;
     out->stream.common.get_buffer_size = out_get_buffer_size;
@@ -278,30 +780,61 @@
 
     out->dev = adev;
 
-    config->format = out_get_format(&out->stream.common);
-    config->channel_mask = out_get_channels(&out->stream.common);
-    config->sample_rate = out_get_sample_rate(&out->stream.common);
+    if (output_hardware_config_is_cached) {
+        config->sample_rate = cached_output_hardware_config.rate;
+
+        config->format = alsa_to_fw_format_id(cached_output_hardware_config.format);
+        if (config->format != AUDIO_FORMAT_PCM_16_BIT) {
+            // Always report PCM16 for now. AudioPolicyManagerBase/AudioFlinger dont' understand
+            // formats with more other format, so we won't get chosen (say with a 24bit DAC).
+            //TODO(pmclean) remove this when the above restriction is removed.
+            config->format = AUDIO_FORMAT_PCM_16_BIT;
+        }
+
+        config->channel_mask =
+                audio_channel_out_mask_from_count(cached_output_hardware_config.channels);
+        if (config->channel_mask != AUDIO_CHANNEL_OUT_STEREO) {
+            // Always report STEREO for now.  AudioPolicyManagerBase/AudioFlinger dont' understand
+            // formats with more channels, so we won't get chosen (say with a 4-channel DAC).
+            //TODO(pmclean) remove this when the above restriction is removed.
+            config->channel_mask = AUDIO_CHANNEL_OUT_STEREO;
+        }
+    } else {
+        cached_output_hardware_config = default_alsa_out_config;
+
+        config->format = out_get_format(&out->stream.common);
+        config->channel_mask = out_get_channels(&out->stream.common);
+        config->sample_rate = out_get_sample_rate(&out->stream.common);
+    }
+
+    out->conversion_buffer = NULL;
+    out->conversion_buffer_size = 0;
 
     out->standby = true;
 
-    adev->card = -1;
-    adev->device = -1;
-
     *stream_out = &out->stream;
     return 0;
 
 err_open:
     free(out);
     *stream_out = NULL;
-    return ret;
+    return -ENOSYS;
 }
 
 static void adev_close_output_stream(struct audio_hw_device *dev,
                                      struct audio_stream_out *stream)
 {
+    ALOGV("usb:audio_hw::out adev_close_output_stream()");
     struct stream_out *out = (struct stream_out *)stream;
 
+    //TODO(pmclean) why are we doing this when stream get's freed at the end
+    // because it closes the pcm device
     out_standby(&stream->common);
+
+    free(out->conversion_buffer);
+    out->conversion_buffer = NULL;
+    out->conversion_buffer_size = 0;
+
     free(stream);
 }
 
@@ -310,8 +843,7 @@
     return 0;
 }
 
-static char * adev_get_parameters(const struct audio_hw_device *dev,
-                                  const char *keys)
+static char * adev_get_parameters(const struct audio_hw_device *dev, const char *keys)
 {
     return strdup("");
 }
@@ -352,18 +884,390 @@
     return 0;
 }
 
+/* Helper functions */
+static uint32_t in_get_sample_rate(const struct audio_stream *stream)
+{
+    return cached_input_hardware_config.rate;
+}
+
+static int in_set_sample_rate(struct audio_stream *stream, uint32_t rate)
+{
+    return -ENOSYS;
+}
+
+static size_t in_get_buffer_size(const struct audio_stream *stream)
+{
+    ALOGV("usb: in_get_buffer_size() = %zu",
+          cached_input_hardware_config.period_size * audio_stream_frame_size(stream));
+    return cached_input_hardware_config.period_size * audio_stream_frame_size(stream);
+
+}
+
+static uint32_t in_get_channels(const struct audio_stream *stream)
+{
+    // just report stereo for now
+    return AUDIO_CHANNEL_IN_STEREO;
+}
+
+static audio_format_t in_get_format(const struct audio_stream *stream)
+{
+    // just report 16-bit, pcm for now.
+    return AUDIO_FORMAT_PCM_16_BIT;
+}
+
+static int in_set_format(struct audio_stream *stream, audio_format_t format)
+{
+    return -ENOSYS;
+}
+
+static int in_standby(struct audio_stream *stream)
+{
+    struct stream_in *in = (struct stream_in *) stream;
+
+    pthread_mutex_lock(&in->dev->lock);
+    pthread_mutex_lock(&in->lock);
+
+    if (!in->standby) {
+        pcm_close(in->pcm);
+        in->pcm = NULL;
+        in->standby = true;
+    }
+
+    pthread_mutex_unlock(&in->lock);
+    pthread_mutex_unlock(&in->dev->lock);
+
+    return 0;
+}
+
+static int in_dump(const struct audio_stream *stream, int fd)
+{
+    return 0;
+}
+
+static int in_set_parameters(struct audio_stream *stream, const char *kvpairs)
+{
+    ALOGV("usb: audio_hw::in in_set_parameters() keys:%s", kvpairs);
+
+    struct stream_in *in = (struct stream_in *)stream;
+    struct audio_device *adev = in->dev;
+    struct str_parms *parms;
+    char value[32];
+    int param_val;
+    int routing = 0;
+    int ret_value = 0;
+
+    parms = str_parms_create_str(kvpairs);
+    pthread_mutex_lock(&adev->lock);
+
+    bool recache_device_params = false;
+
+    // Card/Device
+    param_val = str_parms_get_str(parms, "card", value, sizeof(value));
+    if (param_val >= 0) {
+        adev->in_card = atoi(value);
+        recache_device_params = true;
+    }
+
+    param_val = str_parms_get_str(parms, "device", value, sizeof(value));
+    if (param_val >= 0) {
+        adev->in_device = atoi(value);
+        recache_device_params = true;
+    }
+
+    if (recache_device_params && adev->in_card >= 0 && adev->in_device >= 0) {
+        ret_value = read_alsa_device_config(adev->in_card, adev->in_device,
+                                            PCM_IN, &(cached_input_hardware_config));
+        input_hardware_config_is_cached = (ret_value == 0);
+    }
+
+    pthread_mutex_unlock(&adev->lock);
+    str_parms_destroy(parms);
+
+    return ret_value;
+}
+
+//TODO(pmclean) it seems like both out_get_parameters() and in_get_parameters()
+// could be written in terms of a get_device_parameters(io_type)
+
+static char * in_get_parameters(const struct audio_stream *stream, const char *keys) {
+    ALOGV("usb:audio_hw::in in_get_parameters() keys:%s", keys);
+
+    struct stream_in *in = (struct stream_in *)stream;
+    struct audio_device *adev = in->dev;
+
+    if (adev->in_card < 0 || adev->in_device < 0)
+        return strdup("");
+
+    struct pcm_params * alsa_hw_params = pcm_params_get(adev->in_card, adev->in_device, PCM_IN);
+    if (alsa_hw_params == NULL)
+        return strdup("");
+
+    struct str_parms *query = str_parms_create_str(keys);
+    struct str_parms *result = str_parms_create();
+
+    int num_written = 0;
+    char buffer[256];
+    int buffer_size = sizeof(buffer) / sizeof(buffer[0]);
+    char* result_str = NULL;
+
+    unsigned min, max;
+
+    // These keys are from hardware/libhardware/include/audio.h
+    // supported sample rates
+    if (str_parms_has_key(query, AUDIO_PARAMETER_STREAM_SUP_SAMPLING_RATES)) {
+        // pcm_hw_params doesn't have a list of supported samples rates, just a min and a max, so
+        // if they are different, return a list containing those two values, otherwise just the one.
+        min = pcm_params_get_min(alsa_hw_params, PCM_PARAM_RATE);
+        max = pcm_params_get_max(alsa_hw_params, PCM_PARAM_RATE);
+        num_written = snprintf(buffer, buffer_size, "%u", min);
+        if (min != max) {
+            snprintf(buffer + num_written, buffer_size - num_written, "|%u", max);
+        }
+        str_parms_add_str(result, AUDIO_PARAMETER_STREAM_SAMPLING_RATE, buffer);
+    }  // AUDIO_PARAMETER_STREAM_SUP_SAMPLING_RATES
+
+    // supported channel counts
+    if (str_parms_has_key(query, AUDIO_PARAMETER_STREAM_SUP_CHANNELS)) {
+        // Similarly for output channels count
+        min = pcm_params_get_min(alsa_hw_params, PCM_PARAM_CHANNELS);
+        max = pcm_params_get_max(alsa_hw_params, PCM_PARAM_CHANNELS);
+        num_written = snprintf(buffer, buffer_size, "%u", min);
+        if (min != max) {
+            snprintf(buffer + num_written, buffer_size - num_written, "|%u", max);
+        }
+        str_parms_add_str(result, AUDIO_PARAMETER_STREAM_CHANNELS, buffer);
+    }  // AUDIO_PARAMETER_STREAM_SUP_CHANNELS
+
+    // supported sample formats
+    if (str_parms_has_key(query, AUDIO_PARAMETER_STREAM_SUP_FORMATS)) {
+        //TODO(pmclean): this is wrong.
+        min = pcm_params_get_min(alsa_hw_params, PCM_PARAM_SAMPLE_BITS);
+        max = pcm_params_get_max(alsa_hw_params, PCM_PARAM_SAMPLE_BITS);
+        num_written = snprintf(buffer, buffer_size, "%u", min);
+        if (min != max) {
+            snprintf(buffer + num_written, buffer_size - num_written, "|%u", max);
+        }
+        str_parms_add_str(result, AUDIO_PARAMETER_STREAM_SUP_FORMATS, buffer);
+    }  // AUDIO_PARAMETER_STREAM_SUP_FORMATS
+
+    result_str = str_parms_to_str(result);
+
+    // done with these...
+    str_parms_destroy(query);
+    str_parms_destroy(result);
+
+    return result_str;
+}
+
+static int in_add_audio_effect(const struct audio_stream *stream, effect_handle_t effect)
+{
+    return 0;
+}
+
+static int in_remove_audio_effect(const struct audio_stream *stream, effect_handle_t effect)
+{
+    return 0;
+}
+
+static int in_set_gain(struct audio_stream_in *stream, float gain)
+{
+    return 0;
+}
+
+/* must be called with hw device and output stream mutexes locked */
+static int start_input_stream(struct stream_in *in) {
+    struct audio_device *adev = in->dev;
+    int return_val = 0;
+
+    ALOGV("usb:audio_hw::start_input_stream(card:%d device:%d)",
+          adev->in_card, adev->in_device);
+
+    in->pcm = pcm_open(adev->in_card, adev->in_device, PCM_IN, &cached_input_hardware_config);
+    if (in->pcm == NULL) {
+        ALOGE("usb:audio_hw pcm_open() in->pcm == NULL");
+        return -ENOMEM;
+    }
+
+    if (in->pcm && !pcm_is_ready(in->pcm)) {
+        ALOGE("usb:audio_hw audio_hw pcm_open() failed: %s", pcm_get_error(in->pcm));
+        pcm_close(in->pcm);
+        return -ENOMEM;
+    }
+
+    return 0;
+}
+
+//TODO(pmclean) mutex stuff here (see out_write)
+static ssize_t in_read(struct audio_stream_in *stream, void* buffer, size_t bytes)
+{
+    size_t num_read_buff_bytes = 0;
+    void * read_buff = buffer;
+    void * out_buff = buffer;
+
+    struct stream_in * in = (struct stream_in *) stream;
+
+    ALOGV("usb: in_read(%d)", bytes);
+
+    pthread_mutex_lock(&in->dev->lock);
+    pthread_mutex_lock(&in->lock);
+
+    if (in->standby) {
+        if (start_input_stream(in) != 0) {
+            goto err;
+        }
+        in->standby = false;
+    }
+
+    // OK, we need to figure out how much data to read to be able to output the requested
+    // number of bytes in the HAL format (16-bit, stereo).
+    num_read_buff_bytes = bytes;
+    int num_device_channels = cached_input_hardware_config.channels;
+    int num_req_channels = 2; /* always, for now */
+
+    if (num_device_channels != num_req_channels) {
+        num_read_buff_bytes = (num_device_channels * num_read_buff_bytes) / num_req_channels;
+    }
+
+    if (cached_output_hardware_config.format == PCM_FORMAT_S24_3LE) {
+        num_read_buff_bytes = (3 * num_read_buff_bytes) / 2;
+    }
+
+    // Setup/Realloc the conversion buffer (if necessary).
+    if (num_read_buff_bytes != bytes) {
+        if (num_read_buff_bytes > in->conversion_buffer_size) {
+            //TODO(pmclean) - remove this when AudioPolicyManger/AudioFlinger support arbitrary formats
+            // (and do these conversions themselves)
+            in->conversion_buffer_size = num_read_buff_bytes;
+            in->conversion_buffer = realloc(in->conversion_buffer, in->conversion_buffer_size);
+        }
+        read_buff = in->conversion_buffer;
+    }
+
+    if (pcm_read(in->pcm, read_buff, num_read_buff_bytes) == 0) {
+        /*
+         * Do any conversions necessary to send the data in the format specified to/by the HAL
+         * (but different from the ALSA format), such as 24bit ->16bit, or 4chan -> 2chan.
+         */
+        if (cached_output_hardware_config.format == PCM_FORMAT_S24_3LE) {
+            if (num_device_channels != num_req_channels) {
+                out_buff = read_buff;
+            }
+
+            /* Bit Format Conversion */
+            num_read_buff_bytes =
+                convert_24_3_to_16(read_buff, num_read_buff_bytes / 3, out_buff);
+        }
+
+        if (num_device_channels != num_req_channels) {
+            out_buff = buffer;
+            /* Num Channels conversion */
+            if (num_device_channels < num_req_channels) {
+                num_read_buff_bytes =
+                    contract_channels_16(read_buff, num_device_channels,
+                                         out_buff, num_req_channels,
+                                         num_read_buff_bytes / sizeof(short));
+            } else {
+                num_read_buff_bytes =
+                    expand_channels_16(read_buff, num_device_channels,
+                                       out_buff, num_req_channels,
+                                       num_read_buff_bytes / sizeof(short));
+            }
+        }
+    }
+
+err:
+    pthread_mutex_unlock(&in->lock);
+    pthread_mutex_unlock(&in->dev->lock);
+
+    return num_read_buff_bytes;
+}
+
+static uint32_t in_get_input_frames_lost(struct audio_stream_in *stream)
+{
+    return 0;
+}
+
 static int adev_open_input_stream(struct audio_hw_device *dev,
                                   audio_io_handle_t handle,
                                   audio_devices_t devices,
                                   struct audio_config *config,
                                   struct audio_stream_in **stream_in)
 {
-    return -ENOSYS;
+    ALOGV("usb: in adev_open_input_stream() rate:%" PRIu32 ", chanMask:0x%" PRIX32 ", fmt:%" PRIu8,
+          config->sample_rate, config->channel_mask, config->format);
+
+    struct stream_in *in = (struct stream_in *)calloc(1, sizeof(struct stream_in));
+    if (in == NULL)
+        return -ENOMEM;
+
+    // setup function pointers
+    in->stream.common.get_sample_rate = in_get_sample_rate;
+    in->stream.common.set_sample_rate = in_set_sample_rate;
+    in->stream.common.get_buffer_size = in_get_buffer_size;
+    in->stream.common.get_channels = in_get_channels;
+    in->stream.common.get_format = in_get_format;
+    in->stream.common.set_format = in_set_format;
+    in->stream.common.standby = in_standby;
+    in->stream.common.dump = in_dump;
+    in->stream.common.set_parameters = in_set_parameters;
+    in->stream.common.get_parameters = in_get_parameters;
+    in->stream.common.add_audio_effect = in_add_audio_effect;
+    in->stream.common.remove_audio_effect = in_remove_audio_effect;
+
+    in->stream.set_gain = in_set_gain;
+    in->stream.read = in_read;
+    in->stream.get_input_frames_lost = in_get_input_frames_lost;
+
+    in->dev = (struct audio_device *)dev;
+
+    if (output_hardware_config_is_cached) {
+        config->sample_rate = cached_output_hardware_config.rate;
+
+        config->format = alsa_to_fw_format_id(cached_output_hardware_config.format);
+        if (config->format != AUDIO_FORMAT_PCM_16_BIT) {
+            // Always report PCM16 for now. AudioPolicyManagerBase/AudioFlinger dont' understand
+            // formats with more other format, so we won't get chosen (say with a 24bit DAC).
+            //TODO(pmclean) remove this when the above restriction is removed.
+            config->format = AUDIO_FORMAT_PCM_16_BIT;
+        }
+
+        config->channel_mask = audio_channel_out_mask_from_count(
+                cached_output_hardware_config.channels);
+        if (config->channel_mask != AUDIO_CHANNEL_OUT_STEREO) {
+            // Always report STEREO for now.  AudioPolicyManagerBase/AudioFlinger dont' understand
+            // formats with more channels, so we won't get chosen (say with a 4-channel DAC).
+            //TODO(pmclean) remove this when the above restriction is removed.
+            config->channel_mask = AUDIO_CHANNEL_OUT_STEREO;
+        }
+    } else {
+        cached_input_hardware_config = default_alsa_in_config;
+
+        config->format = out_get_format(&in->stream.common);
+        config->channel_mask = out_get_channels(&in->stream.common);
+        config->sample_rate = out_get_sample_rate(&in->stream.common);
+    }
+
+    in->standby = true;
+
+    in->conversion_buffer = NULL;
+    in->conversion_buffer_size = 0;
+
+    *stream_in = &in->stream;
+
+    return 0;
 }
 
-static void adev_close_input_stream(struct audio_hw_device *dev,
-                                   struct audio_stream_in *stream)
+static void adev_close_input_stream(struct audio_hw_device *dev, struct audio_stream_in *stream)
 {
+    struct stream_in *in = (struct stream_in *)stream;
+
+    //TODO(pmclean) why are we doing this when stream get's freed at the end
+    // because it closes the pcm device
+    in_standby(&stream->common);
+
+    free(in->conversion_buffer);
+
+    free(stream);
 }
 
 static int adev_dump(const audio_hw_device_t *device, int fd)
@@ -374,21 +1278,20 @@
 static int adev_close(hw_device_t *device)
 {
     struct audio_device *adev = (struct audio_device *)device;
-
     free(device);
+
+    output_hardware_config_is_cached = false;
+    input_hardware_config_is_cached = false;
+
     return 0;
 }
 
-static int adev_open(const hw_module_t* module, const char* name,
-                     hw_device_t** device)
+static int adev_open(const hw_module_t* module, const char* name, hw_device_t** device)
 {
-    struct audio_device *adev;
-    int ret;
-
     if (strcmp(name, AUDIO_HARDWARE_INTERFACE) != 0)
         return -EINVAL;
 
-    adev = calloc(1, sizeof(struct audio_device));
+    struct audio_device *adev = calloc(1, sizeof(struct audio_device));
     if (!adev)
         return -ENOMEM;
 
diff --git a/tests/camera2/CameraBurstTests.cpp b/tests/camera2/CameraBurstTests.cpp
index 7301fce..65ff460 100644
--- a/tests/camera2/CameraBurstTests.cpp
+++ b/tests/camera2/CameraBurstTests.cpp
@@ -15,6 +15,7 @@
  */
 
 #include <gtest/gtest.h>
+#include <inttypes.h>
 
 #define LOG_TAG "CameraBurstTest"
 //#define LOG_NDEBUG 0
@@ -218,7 +219,7 @@
         CameraMetadata tmpRequest = previewRequest;
         ASSERT_EQ(OK, tmpRequest.update(ANDROID_SENSOR_EXPOSURE_TIME,
                                         &exposures[i], 1));
-        ALOGV("Submitting capture request %d with exposure %lld", i,
+        ALOGV("Submitting capture request %d with exposure %"PRId64, i,
             exposures[i]);
         dout << "Capture request " << i << " exposure is "
              << (exposures[i]/1e6f) << std::endl;
@@ -230,11 +231,11 @@
     float brightnesses[CAMERA_FRAME_BURST_COUNT];
     // Get each frame (metadata) and then the buffer. Calculate brightness.
     for (int i = 0; i < CAMERA_FRAME_BURST_COUNT; ++i) {
-        ALOGV("Reading capture request %d with exposure %lld", i, exposures[i]);
+        ALOGV("Reading capture request %d with exposure %"PRId64, i, exposures[i]);
         ASSERT_EQ(OK, mDevice->waitForNextFrame(CAMERA_FRAME_TIMEOUT));
         ALOGV("Reading capture request-1 %d", i);
-        CameraMetadata frameMetadata;
-        ASSERT_EQ(OK, mDevice->getNextFrame(&frameMetadata));
+        CaptureResult result;
+        ASSERT_EQ(OK, mDevice->getNextResult(&result));
         ALOGV("Reading capture request-2 %d", i);
 
         ASSERT_EQ(OK, mFrameListener->waitForFrame(CAMERA_FRAME_TIMEOUT));
@@ -613,7 +614,7 @@
                                         &durationList[i], 1));
         ASSERT_EQ(OK, tmpRequest.update(ANDROID_SENSOR_SENSITIVITY,
                                         &sensitivityList[i], 1));
-        ALOGV("Submitting capture %d with exposure %lld, frame duration %lld, sensitivity %d",
+        ALOGV("Submitting capture %zu with exposure %"PRId64", frame duration %"PRId64", sensitivity %d",
                 i, expList[i], durationList[i], sensitivityList[i]);
         dout << "Capture request " << i <<
                 ": exposure is " << (expList[i]/1e6f) << " ms" <<
@@ -631,7 +632,7 @@
     // Get each frame (metadata) and then the buffer. Calculate brightness.
     for (size_t i = 0; i < expList.size(); ++i) {
 
-        ALOGV("Reading request %d", i);
+        ALOGV("Reading request %zu", i);
         dout << "Waiting for capture " << i << ": " <<
                 " exposure " << (expList[i]/1e6f) << " ms," <<
                 " frame duration " << (durationList[i]/1e6f) << " ms," <<
@@ -644,10 +645,10 @@
         if (durationList[i] * 2 > waitLimit) waitLimit = durationList[i] * 2;
 
         ASSERT_EQ(OK, mDevice->waitForNextFrame(waitLimit));
-        ALOGV("Reading capture request-1 %d", i);
-        CameraMetadata frameMetadata;
-        ASSERT_EQ(OK, mDevice->getNextFrame(&frameMetadata));
-        ALOGV("Reading capture request-2 %d", i);
+        ALOGV("Reading capture request-1 %zu", i);
+        CaptureResult result;
+        ASSERT_EQ(OK, mDevice->getNextResult(&result));
+        ALOGV("Reading capture request-2 %zu", i);
 
         ASSERT_EQ(OK, mFrameListener->waitForFrame(CAMERA_FRAME_TIMEOUT));
         ALOGV("We got the frame now");
@@ -668,7 +669,7 @@
             avgBrightness = 255;
         }
 
-        ALOGV("Total brightness for frame %d was %lld (underexposed %d, "
+        ALOGV("Total brightness for frame %zu was %lld (underexposed %d, "
               "overexposed %d), avg %f", i, brightness, underexposed,
               overexposed, avgBrightness);
         dout << "Average brightness (frame " << i << ") was " << avgBrightness
@@ -711,7 +712,7 @@
 
         if (dumpFrames) {
             String8 dumpName =
-                    String8::format("/data/local/tmp/camera2_test_variable_burst_frame_%03d.yuv", i);
+                    String8::format("/data/local/tmp/camera2_test_variable_burst_frame_%03zu.yuv", i);
             dout << "  Writing YUV dump to " << dumpName << std::endl;
             DumpYuvToFile(dumpName, imgBuffer);
         }
diff --git a/tests/camera2/CameraFrameTests.cpp b/tests/camera2/CameraFrameTests.cpp
index e78a862..3c5abf7 100644
--- a/tests/camera2/CameraFrameTests.cpp
+++ b/tests/camera2/CameraFrameTests.cpp
@@ -115,8 +115,8 @@
         ALOGV("Reading capture request %d", i);
         ASSERT_EQ(OK, mDevice->waitForNextFrame(CAMERA_FRAME_TIMEOUT));
 
-        CameraMetadata frameMetadata;
-        ASSERT_EQ(OK, mDevice->getNextFrame(&frameMetadata));
+        CaptureResult result;
+        ASSERT_EQ(OK, mDevice->getNextResult(&result));
 
         // wait for buffer to be available
         ASSERT_EQ(OK, mFrameListener->waitForFrame(CAMERA_FRAME_TIMEOUT));
diff --git a/tests/camera2/CameraMultiStreamTests.cpp b/tests/camera2/CameraMultiStreamTests.cpp
index a78950c..536b656 100644
--- a/tests/camera2/CameraMultiStreamTests.cpp
+++ b/tests/camera2/CameraMultiStreamTests.cpp
@@ -14,6 +14,7 @@
  * limitations under the License.
  */
 
+#include <inttypes.h>
 #define LOG_TAG "CameraMultiStreamTest"
 //#define LOG_NDEBUG 0
 #include "CameraStreamFixture.h"
@@ -181,11 +182,13 @@
               mHeight(height) {
             mFormat = param.mFormat;
             if (useCpuConsumer) {
-                sp<BufferQueue> bq = new BufferQueue();
-                mCpuConsumer = new CpuConsumer(bq, param.mHeapCount);
+                sp<IGraphicBufferProducer> producer;
+                sp<IGraphicBufferConsumer> consumer;
+                BufferQueue::createBufferQueue(&producer, &consumer);
+                mCpuConsumer = new CpuConsumer(consumer, param.mHeapCount);
                 mCpuConsumer->setName(String8(
                         "CameraMultiStreamTest::mCpuConsumer"));
-                mNativeWindow = new Surface(bq);
+                mNativeWindow = new Surface(producer);
             } else {
                 // Render the stream to screen.
                 mCpuConsumer = NULL;
@@ -353,7 +356,7 @@
             ASSERT_EQ(OK, request.update(ANDROID_SENSOR_EXPOSURE_TIME, &exposures[i], 1));
             ASSERT_EQ(OK, request.update(ANDROID_SENSOR_SENSITIVITY, &sensitivities[i], 1));
             ASSERT_EQ(OK, mDevice->capture(request));
-            ALOGV("Submitting request with: id %d with exposure %lld, sensitivity %d",
+            ALOGV("Submitting request with: id %d with exposure %"PRId64", sensitivity %d",
                     *requestIdStart, exposures[i], sensitivities[i]);
             if (CAMERA_MULTI_STREAM_DEBUGGING) {
                 request.dump(STDOUT_FILENO);
@@ -368,7 +371,7 @@
         // Set wait limit based on expected frame duration.
         int64_t waitLimit = CAMERA_FRAME_TIMEOUT;
         for (size_t i = 0; i < requestCount; i++) {
-            ALOGV("Reading request result %d", i);
+            ALOGV("Reading request result %zu", i);
 
             /**
              * Raise the timeout to be at least twice as long as the exposure
@@ -378,11 +381,13 @@
                 waitLimit = exposures[i] * EXP_WAIT_MULTIPLIER;
             }
 
+            CaptureResult result;
             CameraMetadata frameMetadata;
             int32_t resultRequestId;
             do {
                 ASSERT_EQ(OK, mDevice->waitForNextFrame(waitLimit));
-                ASSERT_EQ(OK, mDevice->getNextFrame(&frameMetadata));
+                ASSERT_EQ(OK, mDevice->getNextResult(&result));
+                frameMetadata = result.mMetadata;
 
                 camera_metadata_entry_t resultEntry = frameMetadata.find(ANDROID_REQUEST_ID);
                 ASSERT_EQ(1u, resultEntry.count);
@@ -392,7 +397,7 @@
                 }
             } while (resultRequestId != targetRequestId);
             targetRequestId++;
-            ALOGV("Got capture burst result for request %d", i);
+            ALOGV("Got capture burst result for request %zu", i);
 
             // Validate capture result
             if (CAMERA_MULTI_STREAM_DEBUGGING) {
@@ -411,7 +416,7 @@
             captureBurstTimes.push_back(systemTime());
             CpuConsumer::LockedBuffer imgBuffer;
             ASSERT_EQ(OK, consumer->lockNextBuffer(&imgBuffer));
-            ALOGV("Got capture buffer for request %d", i);
+            ALOGV("Got capture buffer for request %zu", i);
 
             /**
              * TODO: Validate capture buffer. Current brightness calculation
@@ -523,7 +528,7 @@
         minFrameDuration = DEFAULT_FRAME_DURATION;
     }
 
-    ALOGV("targeted minimal frame duration is: %lldns", minFrameDuration);
+    ALOGV("targeted minimal frame duration is: %"PRId64"ns", minFrameDuration);
 
     data = &(availableJpegSizes.data.i32[0]);
     count = availableJpegSizes.count;
@@ -643,7 +648,7 @@
         ASSERT_EQ(OK, previewRequest.update(
                 ANDROID_SENSOR_EXPOSURE_TIME,
                 &exposures[i], 1));
-        ALOGV("Submitting preview request %d with exposure %lld",
+        ALOGV("Submitting preview request %zu with exposure %"PRId64,
                 i, exposures[i]);
 
         ASSERT_EQ(OK, mDevice->setStreamingRequest(previewRequest));
diff --git a/tests/camera2/CameraStreamFixture.h b/tests/camera2/CameraStreamFixture.h
index a1f3aae..12b1971 100644
--- a/tests/camera2/CameraStreamFixture.h
+++ b/tests/camera2/CameraStreamFixture.h
@@ -161,11 +161,13 @@
         sp<CameraDeviceBase> device = mDevice;
         CameraStreamParams p = mParam;
 
-        sp<BufferQueue> bq = new BufferQueue();
-        mCpuConsumer = new CpuConsumer(bq, p.mHeapCount);
+        sp<IGraphicBufferProducer> producer;
+        sp<IGraphicBufferConsumer> consumer;
+        BufferQueue::createBufferQueue(&producer, &consumer);
+        mCpuConsumer = new CpuConsumer(consumer, p.mHeapCount);
         mCpuConsumer->setName(String8("CameraStreamTest::mCpuConsumer"));
 
-        mNativeWindow = new Surface(bq);
+        mNativeWindow = new Surface(producer);
 
         int format = MapAutoFormat(p.mFormat);
 
diff --git a/tests/camera2/camera2.cpp b/tests/camera2/camera2.cpp
index 600d440..e3e7d9a 100644
--- a/tests/camera2/camera2.cpp
+++ b/tests/camera2/camera2.cpp
@@ -172,13 +172,6 @@
         err = listener.getNotificationsFrom(dev);
         if (err != OK) return err;
 
-        vendor_tag_query_ops_t *vendor_metadata_tag_ops;
-        err = dev->ops->get_metadata_vendor_tag_ops(dev, &vendor_metadata_tag_ops);
-        if (err != OK) return err;
-
-        err = set_camera_metadata_vendor_tag_ops(vendor_metadata_tag_ops);
-        if (err != OK) return err;
-
         return OK;
     }
 
@@ -388,8 +381,10 @@
 
         ASSERT_NO_FATAL_FAILURE(setUpCamera(id));
 
-        sp<BufferQueue> bq = new BufferQueue();
-        sp<CpuConsumer> rawConsumer = new CpuConsumer(bq, 1);
+        sp<IGraphicBufferProducer> bqProducer;
+        sp<IGraphicBufferConsumer> bqConsumer;
+        BufferQueue::createBufferQueue(&bqProducer, &bqConsumer);
+        sp<CpuConsumer> rawConsumer = new CpuConsumer(bqConsumer, 1);
         sp<FrameWaiter> rawWaiter = new FrameWaiter();
         rawConsumer->setFrameAvailableListener(rawWaiter);
 
@@ -420,7 +415,7 @@
 
         int streamId;
         ASSERT_NO_FATAL_FAILURE(
-            setUpStream(bq, width, height, format, &streamId) );
+            setUpStream(bqProducer, width, height, format, &streamId) );
 
         camera_metadata_t *request;
         request = allocate_camera_metadata(20, 2000);
@@ -522,8 +517,10 @@
 
         ASSERT_NO_FATAL_FAILURE(setUpCamera(id));
 
-        sp<BufferQueue> bq = new BufferQueue();
-        sp<CpuConsumer> rawConsumer = new CpuConsumer(bq, 1);
+        sp<IGraphicBufferProducer> bqProducer;
+        sp<IGraphicBufferConsumer> bqConsumer;
+        BufferQueue::createBufferQueue(&bqProducer, &bqConsumer);
+        sp<CpuConsumer> rawConsumer = new CpuConsumer(bqConsumer, 1);
         sp<FrameWaiter> rawWaiter = new FrameWaiter();
         rawConsumer->setFrameAvailableListener(rawWaiter);
 
@@ -554,7 +551,7 @@
 
         int streamId;
         ASSERT_NO_FATAL_FAILURE(
-            setUpStream(bq, width, height, format, &streamId) );
+            setUpStream(bqProducer, width, height, format, &streamId) );
 
         camera_metadata_t *request;
         request = allocate_camera_metadata(20, 2000);
@@ -703,8 +700,10 @@
 
         ASSERT_NO_FATAL_FAILURE(setUpCamera(id));
 
-        sp<BufferQueue> bq = new BufferQueue();
-        sp<CpuConsumer> jpegConsumer = new CpuConsumer(bq, 1);
+        sp<IGraphicBufferProducer> bqProducer;
+        sp<IGraphicBufferConsumer> bqConsumer;
+        BufferQueue::createBufferQueue(&bqProducer, &bqConsumer);
+        sp<CpuConsumer> jpegConsumer = new CpuConsumer(bqConsumer, 1);
         sp<FrameWaiter> jpegWaiter = new FrameWaiter();
         jpegConsumer->setFrameAvailableListener(jpegWaiter);
 
@@ -723,7 +722,7 @@
 
         int streamId;
         ASSERT_NO_FATAL_FAILURE(
-            setUpStream(bq, width, height, format, &streamId) );
+            setUpStream(bqProducer, width, height, format, &streamId) );
 
         camera_metadata_t *request;
         request = allocate_camera_metadata(20, 2000);
diff --git a/tests/fingerprint/Android.mk b/tests/fingerprint/Android.mk
new file mode 100644
index 0000000..4f03c39
--- /dev/null
+++ b/tests/fingerprint/Android.mk
@@ -0,0 +1,19 @@
+LOCAL_PATH:= $(call my-dir)
+include $(CLEAR_VARS)
+
+LOCAL_SRC_FILES:= \
+    fingerprint_tests.cpp \
+
+LOCAL_SHARED_LIBRARIES := \
+    liblog \
+    libhardware \
+
+#LOCAL_C_INCLUDES += \
+#    system/media/camera/include \
+
+LOCAL_CFLAGS += -Wall -Wextra
+
+LOCAL_MODULE:= fingerprint_tests
+LOCAL_MODULE_TAGS := tests
+
+include $(BUILD_NATIVE_TEST)
diff --git a/tests/fingerprint/fingerprint_test_fixtures.h b/tests/fingerprint/fingerprint_test_fixtures.h
new file mode 100644
index 0000000..a526203
--- /dev/null
+++ b/tests/fingerprint/fingerprint_test_fixtures.h
@@ -0,0 +1,75 @@
+/*
+ * Copyright (C) 2014 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef __ANDROID_HAL_FINGERPRINT_TEST_COMMON__
+#define __ANDROID_HAL_FINGERPRINT_TEST_COMMON__
+
+#include <gtest/gtest.h>
+#include <hardware/hardware.h>
+#include <hardware/fingerprint.h>
+
+namespace tests {
+
+static const uint16_t kVersion = HARDWARE_MODULE_API_VERSION(1, 0);
+
+class FingerprintModule : public testing::Test {
+ public:
+    FingerprintModule() :
+        fp_module_(NULL) {}
+    ~FingerprintModule() {}
+ protected:
+    virtual void SetUp() {
+        const hw_module_t *hw_module = NULL;
+        ASSERT_EQ(0, hw_get_module(FINGERPRINT_HARDWARE_MODULE_ID, &hw_module))
+                    << "Can't get fingerprint module";
+        ASSERT_TRUE(NULL != hw_module)
+                    << "hw_get_module didn't return a valid fingerprint module";
+
+        fp_module_ = reinterpret_cast<const fingerprint_module_t*>(hw_module);
+    }
+    const fingerprint_module_t* fp_module() { return fp_module_; }
+ private:
+    const fingerprint_module_t *fp_module_;
+};
+
+class FingerprintDevice : public FingerprintModule {
+ public:
+    FingerprintDevice() :
+        fp_device_(NULL) {}
+    ~FingerprintDevice() {}
+ protected:
+    virtual void SetUp() {
+        FingerprintModule::SetUp();
+        hw_device_t *device = NULL;
+        ASSERT_TRUE(NULL != fp_module()->common.methods->open)
+                    << "Fingerprint open() is unimplemented";
+        ASSERT_EQ(0, fp_module()->common.methods->open(
+            (const hw_module_t*)fp_module(), NULL, &device))
+                << "Can't open fingerprint device";
+        ASSERT_TRUE(NULL != device)
+                    << "Fingerprint open() returned a NULL device";
+        ASSERT_EQ(kVersion, device->version)
+                    << "Unsupported version";
+        fp_device_ = reinterpret_cast<fingerprint_device_t*>(device);
+    }
+    fingerprint_device_t* fp_device() { return fp_device_; }
+ private:
+    fingerprint_device_t *fp_device_;
+};
+
+}  // namespace tests
+
+#endif  // __ANDROID_HAL_FINGERPRINT_TEST_COMMON__
diff --git a/tests/fingerprint/fingerprint_tests.cpp b/tests/fingerprint/fingerprint_tests.cpp
new file mode 100644
index 0000000..4463751
--- /dev/null
+++ b/tests/fingerprint/fingerprint_tests.cpp
@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) 2014 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <gtest/gtest.h>
+#include "fingerprint_test_fixtures.h"
+
+namespace tests {
+
+TEST_F(FingerprintDevice, isThereEnroll) {
+    ASSERT_TRUE(NULL != fp_device()->enroll)
+        << "enroll() function is not implemented";
+}
+
+TEST_F(FingerprintDevice, isThereRemove) {
+    ASSERT_TRUE(NULL != fp_device()->remove)
+        << "remove() function is not implemented";
+}
+
+TEST_F(FingerprintDevice, isThereSetNotify) {
+    ASSERT_TRUE(NULL != fp_device()->set_notify)
+        << "set_notify() function is not implemented";
+}
+
+}  // namespace tests
diff --git a/tests/hardware/Android.mk b/tests/hardware/Android.mk
new file mode 100644
index 0000000..02540c9
--- /dev/null
+++ b/tests/hardware/Android.mk
@@ -0,0 +1,12 @@
+LOCAL_PATH:= $(call my-dir)
+include $(CLEAR_VARS)
+
+LOCAL_MODULE := static-hal-check
+LOCAL_SRC_FILES := struct-size.cpp struct-offset.cpp struct-last.cpp
+LOCAL_SHARED_LIBRARIES := libhardware
+LOCAL_CFLAGS := -std=gnu++11 -O0
+
+LOCAL_C_INCLUDES += \
+    system/media/camera/include
+
+include $(BUILD_STATIC_LIBRARY)
diff --git a/tests/hardware/struct-last.cpp b/tests/hardware/struct-last.cpp
new file mode 100644
index 0000000..44a7b2d
--- /dev/null
+++ b/tests/hardware/struct-last.cpp
@@ -0,0 +1,69 @@
+/*
+ * Copyright (C) 2013 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <cstddef>
+#include <system/window.h>
+#include <hardware/hardware.h>
+#include <hardware/sensors.h>
+#include <hardware/fb.h>
+#include <hardware/hwcomposer.h>
+#include <hardware/gralloc.h>
+#include <hardware/consumerir.h>
+#include <hardware/camera_common.h>
+#include <hardware/camera3.h>
+
+#define GET_PADDING(align, size) (((align) - ((size) % (align))) % (align))
+
+#define CHECK_LAST_MEMBER(type, member) \
+do { \
+static constexpr size_t calc_size = offsetof(type, member) + sizeof(((type *)0)->member); \
+static_assert(sizeof(type) == calc_size + GET_PADDING(alignof(type), calc_size), \
+"" #member " is not the last element of " #type); \
+} while (0)
+
+void CheckSizes(void) {
+    //Types defined in hardware.h
+    CHECK_LAST_MEMBER(hw_module_t, reserved);
+    CHECK_LAST_MEMBER(hw_device_t, close);
+
+    //Types defined in sensors.h
+    CHECK_LAST_MEMBER(sensors_vec_t, reserved);
+    CHECK_LAST_MEMBER(sensors_event_t, reserved1);
+    CHECK_LAST_MEMBER(struct sensor_t, reserved);
+    CHECK_LAST_MEMBER(sensors_poll_device_1_t, reserved_procs);
+
+    //Types defined in fb.h
+    CHECK_LAST_MEMBER(framebuffer_device_t, reserved_proc);
+
+    //Types defined in hwcomposer.h
+    CHECK_LAST_MEMBER(hwc_layer_1_t, reserved);
+    CHECK_LAST_MEMBER(hwc_composer_device_1_t, reserved_proc);
+
+    //Types defined in gralloc.h
+    CHECK_LAST_MEMBER(gralloc_module_t, reserved_proc);
+    CHECK_LAST_MEMBER(alloc_device_t, reserved_proc);
+
+    //Types defined in consumerir.h
+    CHECK_LAST_MEMBER(consumerir_device_t, reserved);
+
+    //Types defined in camera_common.h
+    CHECK_LAST_MEMBER(vendor_tag_ops_t, reserved);
+    CHECK_LAST_MEMBER(camera_module_t, reserved);
+
+    //Types defined in camera3.h
+    CHECK_LAST_MEMBER(camera3_device_ops_t, reserved);
+}
+
diff --git a/tests/hardware/struct-offset.cpp b/tests/hardware/struct-offset.cpp
new file mode 100644
index 0000000..523becc
--- /dev/null
+++ b/tests/hardware/struct-offset.cpp
@@ -0,0 +1,221 @@
+/*
+ * Copyright (C) 2012 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <cstddef>
+#include <system/window.h>
+#include <hardware/hardware.h>
+#include <hardware/sensors.h>
+#include <hardware/fb.h>
+#include <hardware/hwcomposer.h>
+#include <hardware/gralloc.h>
+#include <hardware/consumerir.h>
+#include <hardware/camera_common.h>
+#include <hardware/camera3.h>
+
+//Ideally this would print type.member instead we need to rely on the line number from the output
+template <size_t actual, size_t expected> void check_member(void) {
+    static_assert(actual == expected, "");
+}
+
+#ifdef __LP64__
+#define CHECK_MEMBER_AT(type, member, off32, off64) \
+    check_member<offsetof(type, member), off64>()
+#else
+#define CHECK_MEMBER_AT(type, member, off32, off64) \
+    check_member<offsetof(type, member), off32>()
+#endif
+
+void CheckOffsets(void) {
+    //Types defined in hardware.h
+    CHECK_MEMBER_AT(hw_module_t, tag, 0, 0);
+    CHECK_MEMBER_AT(hw_module_t, module_api_version, 4, 4);
+    CHECK_MEMBER_AT(hw_module_t, hal_api_version, 6, 6);
+    CHECK_MEMBER_AT(hw_module_t, id, 8, 8);
+    CHECK_MEMBER_AT(hw_module_t, name, 12, 16);
+    CHECK_MEMBER_AT(hw_module_t, author, 16, 24);
+    CHECK_MEMBER_AT(hw_module_t, methods, 20, 32);
+    CHECK_MEMBER_AT(hw_module_t, dso, 24, 40);
+    CHECK_MEMBER_AT(hw_module_t, reserved, 28, 48);
+
+    CHECK_MEMBER_AT(hw_device_t, tag, 0, 0);
+    CHECK_MEMBER_AT(hw_device_t, version, 4, 4);
+    CHECK_MEMBER_AT(hw_device_t, module, 8, 8);
+    CHECK_MEMBER_AT(hw_device_t, reserved, 12, 16);
+    CHECK_MEMBER_AT(hw_device_t, close, 60, 112);
+
+    //Types defined in sensors.h
+    CHECK_MEMBER_AT(sensors_vec_t, v, 0, 0);
+    CHECK_MEMBER_AT(sensors_vec_t, x, 0, 0);
+    CHECK_MEMBER_AT(sensors_vec_t, y, 4, 4);
+    CHECK_MEMBER_AT(sensors_vec_t, z, 8, 8);
+    CHECK_MEMBER_AT(sensors_vec_t, azimuth, 0, 0);
+    CHECK_MEMBER_AT(sensors_vec_t, pitch, 4, 4);
+    CHECK_MEMBER_AT(sensors_vec_t, roll, 8, 8);
+    CHECK_MEMBER_AT(sensors_vec_t, status, 12, 12);
+    CHECK_MEMBER_AT(sensors_vec_t, reserved, 13, 13);
+
+    CHECK_MEMBER_AT(sensors_event_t, version, 0, 0);
+    CHECK_MEMBER_AT(sensors_event_t, sensor, 4, 4);
+    CHECK_MEMBER_AT(sensors_event_t, type, 8, 8);
+    CHECK_MEMBER_AT(sensors_event_t, reserved0, 12, 12);
+    CHECK_MEMBER_AT(sensors_event_t, timestamp, 16, 16);
+    CHECK_MEMBER_AT(sensors_event_t, data, 24, 24);
+    CHECK_MEMBER_AT(sensors_event_t, acceleration, 24, 24);
+    CHECK_MEMBER_AT(sensors_event_t, magnetic, 24, 24);
+    CHECK_MEMBER_AT(sensors_event_t, orientation, 24, 24);
+    CHECK_MEMBER_AT(sensors_event_t, gyro, 24, 24);
+    CHECK_MEMBER_AT(sensors_event_t, temperature, 24, 24);
+    CHECK_MEMBER_AT(sensors_event_t, distance, 24, 24);
+    CHECK_MEMBER_AT(sensors_event_t, light, 24, 24);
+    CHECK_MEMBER_AT(sensors_event_t, pressure, 24, 24);
+    CHECK_MEMBER_AT(sensors_event_t, relative_humidity, 24, 24);
+    CHECK_MEMBER_AT(sensors_event_t, uncalibrated_gyro, 24, 24);
+    CHECK_MEMBER_AT(sensors_event_t, uncalibrated_magnetic, 24, 24);
+    CHECK_MEMBER_AT(sensors_event_t, meta_data, 24, 24);
+    CHECK_MEMBER_AT(sensors_event_t, u64, 24, 24);
+    CHECK_MEMBER_AT(sensors_event_t, u64.data, 24, 24);
+    CHECK_MEMBER_AT(sensors_event_t, u64.step_counter, 24, 24);
+    CHECK_MEMBER_AT(sensors_event_t, flags, 88, 88);
+    CHECK_MEMBER_AT(sensors_event_t, reserved1, 92, 92);
+
+    CHECK_MEMBER_AT(struct sensor_t, name, 0, 0);
+    CHECK_MEMBER_AT(struct sensor_t, vendor, 4, 8);
+    CHECK_MEMBER_AT(struct sensor_t, version, 8, 16);
+    CHECK_MEMBER_AT(struct sensor_t, handle, 12, 20);
+    CHECK_MEMBER_AT(struct sensor_t, type, 16, 24);
+    CHECK_MEMBER_AT(struct sensor_t, maxRange, 20, 28);
+    CHECK_MEMBER_AT(struct sensor_t, resolution, 24, 32);
+    CHECK_MEMBER_AT(struct sensor_t, power, 28, 36);
+    CHECK_MEMBER_AT(struct sensor_t, minDelay, 32, 40);
+    CHECK_MEMBER_AT(struct sensor_t, fifoReservedEventCount, 36, 44);
+    CHECK_MEMBER_AT(struct sensor_t, fifoMaxEventCount, 40, 48);
+    CHECK_MEMBER_AT(struct sensor_t, stringType, 44, 56);
+    CHECK_MEMBER_AT(struct sensor_t, requiredPermission, 48, 64);
+    CHECK_MEMBER_AT(struct sensor_t, maxDelay, 52, 72);
+    CHECK_MEMBER_AT(struct sensor_t, flags, 56, 80);
+    CHECK_MEMBER_AT(struct sensor_t, reserved, 60, 88);
+
+    CHECK_MEMBER_AT(sensors_poll_device_1_t, v0, 0, 0);
+    CHECK_MEMBER_AT(sensors_poll_device_1_t, common, 0, 0);
+    CHECK_MEMBER_AT(sensors_poll_device_1_t, activate, 64, 120);
+    CHECK_MEMBER_AT(sensors_poll_device_1_t, setDelay, 68, 128);
+    CHECK_MEMBER_AT(sensors_poll_device_1_t, poll, 72, 136);
+    CHECK_MEMBER_AT(sensors_poll_device_1_t, batch, 76, 144);
+    CHECK_MEMBER_AT(sensors_poll_device_1_t, flush, 80, 152);
+    CHECK_MEMBER_AT(sensors_poll_device_1_t, reserved_procs, 84, 160);
+
+    //Types defined in fb.h
+    CHECK_MEMBER_AT(framebuffer_device_t, common, 0, 0);
+    CHECK_MEMBER_AT(framebuffer_device_t, flags, 64, 120);
+    CHECK_MEMBER_AT(framebuffer_device_t, width, 68, 124);
+    CHECK_MEMBER_AT(framebuffer_device_t, height, 72, 128);
+    CHECK_MEMBER_AT(framebuffer_device_t, stride, 76, 132);
+    CHECK_MEMBER_AT(framebuffer_device_t, format, 80, 136);
+    CHECK_MEMBER_AT(framebuffer_device_t, xdpi, 84, 140);
+    CHECK_MEMBER_AT(framebuffer_device_t, ydpi, 88, 144);
+    CHECK_MEMBER_AT(framebuffer_device_t, fps, 92, 148);
+    CHECK_MEMBER_AT(framebuffer_device_t, minSwapInterval, 96, 152);
+    CHECK_MEMBER_AT(framebuffer_device_t, maxSwapInterval, 100, 156);
+    CHECK_MEMBER_AT(framebuffer_device_t, numFramebuffers, 104, 160);
+    CHECK_MEMBER_AT(framebuffer_device_t, reserved, 108, 164);
+    CHECK_MEMBER_AT(framebuffer_device_t, setSwapInterval, 136, 192);
+    CHECK_MEMBER_AT(framebuffer_device_t, setUpdateRect, 140, 200);
+    CHECK_MEMBER_AT(framebuffer_device_t, post, 144, 208);
+    CHECK_MEMBER_AT(framebuffer_device_t, compositionComplete, 148, 216);
+    CHECK_MEMBER_AT(framebuffer_device_t, dump, 152, 224);
+    CHECK_MEMBER_AT(framebuffer_device_t, enableScreen, 156, 232);
+    CHECK_MEMBER_AT(framebuffer_device_t, reserved_proc, 160, 240);
+
+    //Types defined in hwcomposer.h
+    CHECK_MEMBER_AT(hwc_layer_1_t, compositionType, 0, 0);
+    CHECK_MEMBER_AT(hwc_layer_1_t, hints, 4, 4);
+    CHECK_MEMBER_AT(hwc_layer_1_t, flags, 8, 8);
+    CHECK_MEMBER_AT(hwc_layer_1_t, backgroundColor, 12, 16);
+    CHECK_MEMBER_AT(hwc_layer_1_t, handle, 12, 16);
+    CHECK_MEMBER_AT(hwc_layer_1_t, transform, 16, 24);
+    CHECK_MEMBER_AT(hwc_layer_1_t, blending, 20, 28);
+    CHECK_MEMBER_AT(hwc_layer_1_t, sourceCropi, 24, 32);
+    CHECK_MEMBER_AT(hwc_layer_1_t, sourceCrop, 24, 32);
+    CHECK_MEMBER_AT(hwc_layer_1_t, sourceCropf, 24, 32);
+    CHECK_MEMBER_AT(hwc_layer_1_t, displayFrame, 40, 48);
+    CHECK_MEMBER_AT(hwc_layer_1_t, visibleRegionScreen, 56, 64);
+    CHECK_MEMBER_AT(hwc_layer_1_t, acquireFenceFd, 64, 80);
+    CHECK_MEMBER_AT(hwc_layer_1_t, releaseFenceFd, 68, 84);
+    CHECK_MEMBER_AT(hwc_layer_1_t, planeAlpha, 72, 88);
+    CHECK_MEMBER_AT(hwc_layer_1_t, _pad, 73, 89);
+
+    CHECK_MEMBER_AT(hwc_composer_device_1_t, common, 0, 0);
+    CHECK_MEMBER_AT(hwc_composer_device_1_t, prepare, 64, 120);
+    CHECK_MEMBER_AT(hwc_composer_device_1_t, set, 68, 128);
+    CHECK_MEMBER_AT(hwc_composer_device_1_t, eventControl, 72, 136);
+    CHECK_MEMBER_AT(hwc_composer_device_1_t, blank, 76, 144);
+    CHECK_MEMBER_AT(hwc_composer_device_1_t, query, 80, 152);
+    CHECK_MEMBER_AT(hwc_composer_device_1_t, registerProcs, 84, 160);
+    CHECK_MEMBER_AT(hwc_composer_device_1_t, dump, 88, 168);
+    CHECK_MEMBER_AT(hwc_composer_device_1_t, getDisplayConfigs, 92, 176);
+    CHECK_MEMBER_AT(hwc_composer_device_1_t, getDisplayAttributes, 96, 184);
+    CHECK_MEMBER_AT(hwc_composer_device_1_t, reserved_proc, 100, 192);
+
+    //Types defined in gralloc.h
+    CHECK_MEMBER_AT(gralloc_module_t, common, 0, 0);
+    CHECK_MEMBER_AT(gralloc_module_t, registerBuffer, 128, 248);
+    CHECK_MEMBER_AT(gralloc_module_t, unregisterBuffer, 132, 256);
+    CHECK_MEMBER_AT(gralloc_module_t, lock, 136, 264);
+    CHECK_MEMBER_AT(gralloc_module_t, unlock, 140, 272);
+    CHECK_MEMBER_AT(gralloc_module_t, perform, 144, 280);
+    CHECK_MEMBER_AT(gralloc_module_t, lock_ycbcr, 148, 288);
+    CHECK_MEMBER_AT(gralloc_module_t, reserved_proc, 152, 296);
+
+    CHECK_MEMBER_AT(alloc_device_t, common, 0, 0);
+    CHECK_MEMBER_AT(alloc_device_t, alloc, 64, 120);
+    CHECK_MEMBER_AT(alloc_device_t, free, 68, 128);
+    CHECK_MEMBER_AT(alloc_device_t, dump, 72, 136);
+    CHECK_MEMBER_AT(alloc_device_t, reserved_proc, 76, 144);
+
+    //Types defined in consumerir.h
+    CHECK_MEMBER_AT(consumerir_device_t, common, 0, 0);
+    CHECK_MEMBER_AT(consumerir_device_t, transmit, 64, 120);
+    CHECK_MEMBER_AT(consumerir_device_t, get_num_carrier_freqs, 68, 128);
+    CHECK_MEMBER_AT(consumerir_device_t, get_carrier_freqs, 72, 136);
+    CHECK_MEMBER_AT(consumerir_device_t, reserved, 76, 144);
+
+    //Types defined in camera_common.h
+    CHECK_MEMBER_AT(vendor_tag_ops_t, get_tag_count, 0, 0);
+    CHECK_MEMBER_AT(vendor_tag_ops_t, get_all_tags, 4, 8);
+    CHECK_MEMBER_AT(vendor_tag_ops_t, get_section_name, 8, 16);
+    CHECK_MEMBER_AT(vendor_tag_ops_t, get_tag_name, 12, 24);
+    CHECK_MEMBER_AT(vendor_tag_ops_t, get_tag_type, 16, 32);
+    CHECK_MEMBER_AT(vendor_tag_ops_t, reserved, 20, 40);
+
+    CHECK_MEMBER_AT(camera_module_t, common, 0, 0);
+    CHECK_MEMBER_AT(camera_module_t, get_number_of_cameras, 128, 248);
+    CHECK_MEMBER_AT(camera_module_t, get_camera_info, 132, 256);
+    CHECK_MEMBER_AT(camera_module_t, set_callbacks, 136, 264);
+    CHECK_MEMBER_AT(camera_module_t, get_vendor_tag_ops, 140, 272);
+    CHECK_MEMBER_AT(camera_module_t, reserved, 144, 280);
+
+    //Types defined in camera3.h
+    CHECK_MEMBER_AT(camera3_device_ops_t, initialize, 0, 0);
+    CHECK_MEMBER_AT(camera3_device_ops_t, configure_streams, 4, 8);
+    CHECK_MEMBER_AT(camera3_device_ops_t, register_stream_buffers, 8, 16);
+    CHECK_MEMBER_AT(camera3_device_ops_t, construct_default_request_settings, 12, 24);
+    CHECK_MEMBER_AT(camera3_device_ops_t, process_capture_request, 16, 32);
+    CHECK_MEMBER_AT(camera3_device_ops_t, get_metadata_vendor_tag_ops, 20, 40);
+    CHECK_MEMBER_AT(camera3_device_ops_t, dump, 24, 48);
+    CHECK_MEMBER_AT(camera3_device_ops_t, flush, 28, 56);
+    CHECK_MEMBER_AT(camera3_device_ops_t, reserved, 32, 64);
+}
+
diff --git a/tests/hardware/struct-size.cpp b/tests/hardware/struct-size.cpp
new file mode 100644
index 0000000..4207ea8
--- /dev/null
+++ b/tests/hardware/struct-size.cpp
@@ -0,0 +1,76 @@
+/*
+ * Copyright (C) 2012 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+
+#include <system/window.h>
+#include <hardware/hardware.h>
+#include <hardware/sensors.h>
+#include <hardware/fb.h>
+#include <hardware/hwcomposer.h>
+#include <hardware/gralloc.h>
+#include <hardware/consumerir.h>
+#include <hardware/camera_common.h>
+#include <hardware/camera3.h>
+
+template<size_t> static constexpr size_t CheckSizeHelper(size_t, size_t);
+
+template<> constexpr size_t CheckSizeHelper<4>(size_t size32, size_t size64) {
+    return size32;
+}
+
+template<> constexpr size_t CheckSizeHelper<8>(size_t size32, size_t size64) {
+    return size64;
+}
+
+template<typename T, size_t size32, size_t size64> static void CheckTypeSize() {
+    const size_t mySize = CheckSizeHelper<sizeof(void *)>(size32, size64);
+
+    static_assert(sizeof(T) == mySize, "struct is the wrong size");
+}
+
+void CheckSizes(void) {
+    //Types defined in hardware.h
+    CheckTypeSize<hw_module_t, 128, 248>();
+    CheckTypeSize<hw_device_t, 64, 120>();
+
+    //Types defined in sensors.h
+    CheckTypeSize<sensors_vec_t, 16, 16>();
+    CheckTypeSize<sensors_event_t, 104, 104>();
+    CheckTypeSize<struct sensor_t, 68, 104>();
+    CheckTypeSize<sensors_poll_device_1_t, 116, 224>();
+
+    //Types defined in fb.h
+    CheckTypeSize<framebuffer_device_t, 184, 288>();
+
+    //Types defined in hwcomposer.h
+    CheckTypeSize<hwc_layer_1_t, 96, 120>();
+    CheckTypeSize<hwc_composer_device_1_t, 116, 224>();
+
+    //Types defined in gralloc.h
+    CheckTypeSize<gralloc_module_t, 176, 344>();
+    CheckTypeSize<alloc_device_t, 104, 200>();
+
+    //Types defined in consumerir.h
+    CheckTypeSize<consumerir_device_t, 96, 184>();
+
+    //Types defined in camera_common.h
+    CheckTypeSize<vendor_tag_ops_t, 52, 104>();
+    CheckTypeSize<camera_module_t, 176, 344>();
+
+    //Types defined in camera3.h
+    CheckTypeSize<camera3_device_ops_t, 64, 128>();
+}
+