initial radio HAL definition
Added defintions for radio broadcast receiver HAL
Change-Id: Icd90e2b7b205af22b62eb957dff3cf6afc08294d
diff --git a/include/hardware/radio.h b/include/hardware/radio.h
new file mode 100644
index 0000000..145deb5
--- /dev/null
+++ b/include/hardware/radio.h
@@ -0,0 +1,298 @@
+/*
+ * Copyright (C) 2015 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <system/radio.h>
+#include <hardware/hardware.h>
+
+#ifndef ANDROID_RADIO_HAL_H
+#define ANDROID_RADIO_HAL_H
+
+
+__BEGIN_DECLS
+
+/**
+ * The id of this module
+ */
+#define RADIO_HARDWARE_MODULE_ID "radio"
+
+/**
+ * Name of the audio devices to open
+ */
+#define RADIO_HARDWARE_DEVICE "radio_hw_device"
+
+#define RADIO_MODULE_API_VERSION_1_0 HARDWARE_MODULE_API_VERSION(1, 0)
+#define RADIO_MODULE_API_VERSION_CURRENT RADIO_MODULE_API_VERSION_1_0
+
+
+#define RADIO_DEVICE_API_VERSION_1_0 HARDWARE_DEVICE_API_VERSION(1, 0)
+#define RADIO_DEVICE_API_VERSION_CURRENT RADIO_DEVICE_API_VERSION_1_0
+
+/**
+ * List of known radio HAL modules. This is the base name of the radio HAL
+ * library composed of the "radio." prefix, one of the base names below and
+ * a suffix specific to the device.
+ * E.g: radio.fm.default.so
+ */
+
+#define RADIO_HARDWARE_MODULE_ID_FM "fm" /* corresponds to RADIO_CLASS_AM_FM */
+#define RADIO_HARDWARE_MODULE_ID_SAT "sat" /* corresponds to RADIO_CLASS_SAT */
+#define RADIO_HARDWARE_MODULE_ID_DT "dt" /* corresponds to RADIO_CLASS_DT */
+
+
+/**
+ * Every hardware module must have a data structure named HAL_MODULE_INFO_SYM
+ * and the fields of this data structure must begin with hw_module_t
+ * followed by module specific information.
+ */
+struct radio_module {
+ struct hw_module_t common;
+};
+
+/*
+ * Callback function called by the HAL when one of the following occurs:
+ * - event RADIO_EVENT_HW_FAILURE: radio chip of driver failure requiring
+ * closing and reopening of the tuner interface.
+ * - event RADIO_EVENT_CONFIG: new configuration applied in response to open_tuner(),
+ * or set_configuration(). The event status is 0 (no error) if the configuration has been applied,
+ * -EINVAL is not or -ETIMEDOUT in case of time out.
+ * - event RADIO_EVENT_TUNED: tune locked on new station/frequency following scan(),
+ * step(), tune() or auto AF switching. The event status is 0 (no error) if in tune,
+ * -EINVAL is not tuned and data in radio_program_info is not valid or -ETIMEDOUT if scan()
+ * timed out.
+ * - event RADIO_EVENT_TA: at the beginning and end of traffic announcement if current
+ * configuration enables TA.
+ * - event RADIO_EVENT_AF: after automatic switching to alternate frequency if current
+ * configuration enables AF switching.
+ * - event RADIO_EVENT_ANTENNA: when the antenna is connected or disconnected.
+ * - event RADIO_EVENT_METADATA: when new meta data are received from the tuned station.
+ * The callback MUST NOT be called synchronously while executing a HAL function but from
+ * a separate thread.
+ */
+typedef void (*radio_callback_t)(radio_hal_event_t *event, void *cookie);
+
+/* control interface for a radio tuner */
+struct radio_tuner {
+ /*
+ * Apply current radio band configuration (band, range, channel spacing ...).
+ *
+ * arguments:
+ * - config: the band configuration to apply
+ *
+ * returns:
+ * 0 if configuration could be applied
+ * -EINVAL if configuration requested is invalid
+ *
+ * Automatically cancels pending scan, step or tune.
+ *
+ * Callback function with event RADIO_EVENT_CONFIG MUST be called once the
+ * configuration is applied or a failure occurs or after a time out.
+ */
+ int (*set_configuration)(const struct radio_tuner *tuner,
+ const radio_hal_band_config_t *config);
+
+ /*
+ * Retrieve current radio band configuration.
+ *
+ * arguments:
+ * - config: where to return the band configuration
+ *
+ * returns:
+ * 0 if valid configuration is returned
+ * -EINVAL if invalid arguments are passed
+ */
+ int (*get_configuration)(const struct radio_tuner *tuner,
+ radio_hal_band_config_t *config);
+
+ /*
+ * Start scanning up to next valid station.
+ * Must be called when a valid configuration has been applied.
+ *
+ * arguments:
+ * - direction: RADIO_DIRECTION_UP or RADIO_DIRECTION_DOWN
+ * - skip_sub_channel: valid for HD radio or digital radios only: ignore sub channels
+ * (e.g SPS for HD radio).
+ *
+ * returns:
+ * 0 if scan successfully started
+ * -ENOSYS if called out of sequence
+ * -ENODEV if another error occurs
+ *
+ * Automatically cancels pending scan, step or tune.
+ *
+ * Callback function with event RADIO_EVENT_TUNED MUST be called once
+ * locked on a station or after a time out or full frequency scan if
+ * no station found. The event status should indicate if a valid station
+ * is tuned or not.
+ */
+ int (*scan)(const struct radio_tuner *tuner,
+ radio_direction_t direction, bool skip_sub_channel);
+
+ /*
+ * Move one channel spacing up or down.
+ * Must be called when a valid configuration has been applied.
+ *
+ * arguments:
+ * - direction: RADIO_DIRECTION_UP or RADIO_DIRECTION_DOWN
+ * - skip_sub_channel: valid for HD radio or digital radios only: ignore sub channels
+ * (e.g SPS for HD radio).
+ *
+ * returns:
+ * 0 if step successfully started
+ * -ENOSYS if called out of sequence
+ * -ENODEV if another error occurs
+ *
+ * Automatically cancels pending scan, step or tune.
+ *
+ * Callback function with event RADIO_EVENT_TUNED MUST be called once
+ * step completed or after a time out. The event status should indicate
+ * if a valid station is tuned or not.
+ */
+ int (*step)(const struct radio_tuner *tuner,
+ radio_direction_t direction, bool skip_sub_channel);
+
+ /*
+ * Tune to specified frequency.
+ * Must be called when a valid configuration has been applied.
+ *
+ * arguments:
+ * - channel: channel to tune to. A frequency in kHz for AM/FM/HD Radio bands.
+ * - sub_channel: valid for HD radio or digital radios only: (e.g SPS number for HD radio).
+ *
+ * returns:
+ * 0 if tune successfully started
+ * -ENOSYS if called out of sequence
+ * -EINVAL if invalid arguments are passed
+ * -ENODEV if another error occurs
+ *
+ * Automatically cancels pending scan, step or tune.
+ *
+ * Callback function with event RADIO_EVENT_TUNED MUST be called once
+ * tuned or after a time out. The event status should indicate
+ * if a valid station is tuned or not.
+ */
+ int (*tune)(const struct radio_tuner *tuner,
+ unsigned int channel, unsigned int sub_channel);
+
+ /*
+ * Cancel a scan, step or tune operation.
+ * Must be called while a scan, step or tune operation is pending
+ * (callback not yet sent).
+ *
+ * returns:
+ * 0 if successful
+ * -ENOSYS if called out of sequence
+ * -ENODEV if another error occurs
+ *
+ * The callback is not sent.
+ */
+ int (*cancel)(const struct radio_tuner *tuner);
+
+ /*
+ * Retrieve current station information.
+ *
+ * arguments:
+ * - info: where to return the program info.
+ * If info->metadata is NULL. no meta data should be returned.
+ * If meta data must be returned, they should be added to or cloned to
+ * info->metadata, not passed from a newly created meta data buffer.
+ *
+ * returns:
+ * 0 if tuned and information available
+ * -EINVAL if invalid arguments are passed
+ * -ENODEV if another error occurs
+ */
+ int (*get_program_information)(const struct radio_tuner *tuner,
+ radio_program_info_t *info);
+};
+
+struct radio_hw_device {
+ struct hw_device_t common;
+
+ /*
+ * Retrieve implementation properties.
+ *
+ * arguments:
+ * - properties: where to return the module properties
+ *
+ * returns:
+ * 0 if no error
+ * -EINVAL if invalid arguments are passed
+ */
+ int (*get_properties)(const struct radio_hw_device *dev,
+ radio_hal_properties_t *properties);
+
+ /*
+ * Open a tuner interface for the requested configuration.
+ * If no other tuner is opened, this will activate the radio module.
+ *
+ * arguments:
+ * - config: the band configuration to apply
+ * - audio: this tuner will be used for live radio listening and should be connected to
+ * the radio audio source.
+ * - callback: the event callback
+ * - cookie: the cookie to pass when calling the callback
+ * - tuner: where to return the tuner interface
+ *
+ * returns:
+ * 0 if HW was powered up and configuration could be applied
+ * -EINVAL if configuration requested is invalid
+ * -ENOSYS if called out of sequence
+ *
+ * Callback function with event RADIO_EVENT_CONFIG MUST be called once the
+ * configuration is applied or a failure occurs or after a time out.
+ */
+ int (*open_tuner)(const struct radio_hw_device *dev,
+ const radio_hal_band_config_t *config,
+ bool audio,
+ radio_callback_t callback,
+ void *cookie,
+ const struct radio_tuner **tuner);
+
+ /*
+ * Close a tuner interface.
+ * If the last tuner is closed, the radio module is deactivated.
+ *
+ * arguments:
+ * - tuner: the tuner interface to close
+ *
+ * returns:
+ * 0 if powered down successfully.
+ * -EINVAL if an invalid argument is passed
+ * -ENOSYS if called out of sequence
+ */
+ int (*close_tuner)(const struct radio_hw_device *dev, const struct radio_tuner *tuner);
+
+};
+
+typedef struct radio_hw_device radio_hw_device_t;
+
+/** convenience API for opening and closing a supported device */
+
+static inline int radio_hw_device_open(const struct hw_module_t* module,
+ struct radio_hw_device** device)
+{
+ return module->methods->open(module, RADIO_HARDWARE_DEVICE,
+ (struct hw_device_t**)device);
+}
+
+static inline int radio_hw_device_close(const struct radio_hw_device* device)
+{
+ return device->common.close((struct hw_device_t *)&device->common);
+}
+
+__END_DECLS
+
+#endif // ANDROID_RADIO_HAL_H