Merge changes from topic "vintf_kernel_ver"
* changes:
Compatibility matrices: add minor revision to kernel versions
Compatibility matrices: kernel req at each FCM version
diff --git a/light/utils/blank_screen.rc b/light/utils/blank_screen.rc
index 735551c..7b2a55e 100644
--- a/light/utils/blank_screen.rc
+++ b/light/utils/blank_screen.rc
@@ -1,5 +1,5 @@
service blank_screen /system/bin/blank_screen
user system
oneshot
- group system readproc
+ group system
shutdown critical
diff --git a/radio/1.2/Android.bp b/radio/1.2/Android.bp
index 56e4afd..f4ca1cf 100644
--- a/radio/1.2/Android.bp
+++ b/radio/1.2/Android.bp
@@ -20,6 +20,7 @@
],
types: [
"CardStatus",
+ "CellConnectionStatus",
"CellIdentityCdma",
"CellIdentityGsm",
"CellIdentityLte",
@@ -31,9 +32,12 @@
"CellInfoLte",
"CellInfoWcdma",
"IncrementalResultsPeriodicityRange",
+ "IndicationFilter",
+ "LinkCapacityEstimate",
"MaxSearchTimeRange",
"NetworkScanRequest",
"NetworkScanResult",
+ "PhysicalChannelConfig",
"RadioConst",
"ScanIntervalRange",
],
diff --git a/radio/1.2/IRadio.hal b/radio/1.2/IRadio.hal
index 6ae78a0..babe86f 100644
--- a/radio/1.2/IRadio.hal
+++ b/radio/1.2/IRadio.hal
@@ -17,6 +17,7 @@
package android.hardware.radio@1.2;
import @1.1::IRadio;
+import @1.1::RadioAccessNetworks;
/**
* This interface is used by telephony and telecom to talk to cellular radio.
@@ -37,4 +38,72 @@
* Response function is IRadioResponse.startNetworkScanResponse()
*/
oneway startNetworkScan_1_2(int32_t serial, NetworkScanRequest request);
+
+ /**
+ * Sets the indication filter.
+ *
+ * Prevents the reporting of specified unsolicited indications from the radio. This is used
+ * for power saving in instances when those indications are not needed. If unset, defaults to
+ * @1.2::IndicationFilter:ALL.
+ *
+ * @param serial Serial number of request.
+ * @param indicationFilter 32-bit bitmap of IndicationFilter. Bits set to 1 indicate the
+ * indications are enabled. See @1.2::IndicationFilter for the definition of each bit.
+ *
+ * Response callback is IRadioResponse.setIndicationFilterResponse()
+ */
+ oneway setIndicationFilter_1_2(int32_t serial, bitfield<IndicationFilter> indicationFilter);
+
+ /**
+ * Sets the signal strength reporting criteria.
+ *
+ * The resulting reporting criteria are the AND of all the supplied criteria.
+ *
+ * Note: Reporting criteria must be individually set for each RAN. If unset, reporting criteria
+ * for that RAN are implementation-defined.
+ *
+ * Response callback is IRadioResponse.setSignalStrengthReportingCriteriaResponse().
+ *
+ * @param serial Serial number of request.
+ * @param hysteresisMs A hysteresis time in milliseconds to prevent flapping. A value of 0
+ * disables hysteresis.
+ * @param hysteresisDb An interval in dB defining the required magnitude change between reports.
+ * hysteresisDb must be smaller than the smallest threshold delta. An
+ * interval value of 0 disables hysteresis.
+ * @param thresholdsDbm A vector of trigger thresholds in dBm. A vector size of 0 disables the
+ * use of thresholds for reporting.
+ * @param ran The type of network for which to apply these thresholds.
+ */
+ oneway setSignalStrengthReportingCriteria(int32_t serial, int32_t hysteresisMs,
+ int32_t hysteresisDb, vec<int32_t> thresholdsDbm, RadioAccessNetworks ran);
+
+ /**
+ * Sets the link capacity reporting criteria.
+ *
+ * The resulting reporting criteria are the AND of all the supplied criteria.
+ *
+ * Note: Reporting criteria must be individually set for each RAN. If unset, reporting criteria
+ * for that RAN are implementation-defined.
+ *
+ * Response callback is IRadioResponse.setLinkCapacityReportingCriteriaResponse().
+ *
+ * @param serial Serial number of request.
+ * @param hysteresisMs A hysteresis time in milliseconds to prevent flapping. A value of 0
+ * disables hysteresis.
+ * @param hysteresisDlKbps An interval in kbps defining the required magnitude change between DL
+ * reports. hysteresisDlKbps must be smaller than the smallest threshold
+ * delta. A value of 0 disables hysteresis.
+ * @param hysteresisUlKbps An interval in kbps defining the required magnitude change between UL
+ * reports. hysteresisUlKbps must be smaller than the smallest threshold
+ * delta. A value of 0 disables hysteresis.
+ * @param thresholdsDownlinkKbps A vector of trigger thresholds in kbps for downlink reports. A
+ * vector size of 0 disables the use of DL thresholds for
+ * reporting.
+ * @param thresholdsUplinkKbps A vector of trigger thresholds in kbps for uplink reports. A
+ * vector size of 0 disables the use of UL thresholds for reporting.
+ * @param ran The type of network for which to apply these thresholds.
+ */
+ oneway setLinkCapacityReportingCriteria(int32_t serial, int32_t hysteresisMs,
+ int32_t hysteresisDlKbps, int32_t hysteresisUlKbps, vec<int32_t> thresholdsDownlinkKbps,
+ vec<int32_t> thresholdsUplinkKbps, RadioAccessNetworks ran);
};
diff --git a/radio/1.2/IRadioIndication.hal b/radio/1.2/IRadioIndication.hal
index 22f655c..a124557 100644
--- a/radio/1.2/IRadioIndication.hal
+++ b/radio/1.2/IRadioIndication.hal
@@ -37,4 +37,29 @@
* @param records Current cell information known to radio
*/
oneway cellInfoList_1_2(RadioIndicationType type, vec<CellInfo> records);
+
+ /**
+ * Indicates current link capacity estimate.
+ *
+ * This replaces @1.0::IRadioIndication.lceData(). The framework must be able to handle
+ * either this function or @1.0::IRadioIndication.lceData(). Implementations supporting
+ * v1.2 must call this function instead of lceData().
+ *
+ * This indication is sent whenever the reporting criteria, as set by
+ * @1.2::IRadio.setLinkCapacityReportingCriteria, are met and the indication is not
+ * suppressed by @1.2::IRadio.setIndicationFilter_1_2().
+ *
+ * @param type Type of radio indication
+ * @param lce LinkCapacityEstimate information as defined in types.hal
+ */
+ oneway currentLinkCapacityEstimate(RadioIndicationType type, LinkCapacityEstimate lce);
+
+ /**
+ * Indicates physical channel configurations.
+ *
+ * @param type Type of radio indication
+ * @param configs List of PhysicalChannelConfigs as defined in types.hal
+ */
+ oneway currentPhysicalChannelConfigs(RadioIndicationType type,
+ vec<PhysicalChannelConfig> configs);
};
diff --git a/radio/1.2/IRadioResponse.hal b/radio/1.2/IRadioResponse.hal
index a7ad30c..c356954 100644
--- a/radio/1.2/IRadioResponse.hal
+++ b/radio/1.2/IRadioResponse.hal
@@ -50,4 +50,26 @@
* RadioError:NONE
*/
oneway getIccCardStatusResponse_1_2(RadioResponseInfo info, CardStatus cardStatus);
+
+ /**
+ * @param info Response info struct containing response type, serial no. and error
+ *
+ * Valid errors returned:
+ * RadioError:NONE
+ * RadioError:INVALID_ARGUMENTS
+ * RadioError:RADIO_NOT_AVAILABLE
+ * RadioError:INTERNAL_ERR
+ */
+ oneway setSignalStrengthReportingCriteriaResponse(RadioResponseInfo info);
+
+ /**
+ * @param info Response info struct containing response type, serial no. and error
+ *
+ * Valid errors returned:
+ * RadioError:NONE
+ * RadioError:INVALID_ARGUMENTS
+ * RadioError:RADIO_NOT_AVAILABLE
+ * RadioError:INTERNAL_ERR
+ */
+ oneway setLinkCapacityReportingCriteriaResponse(RadioResponseInfo info);
};
diff --git a/radio/1.2/types.hal b/radio/1.2/types.hal
index 3aa2446..4515237 100644
--- a/radio/1.2/types.hal
+++ b/radio/1.2/types.hal
@@ -64,6 +64,67 @@
MAX = 10,
};
+enum CellConnectionStatus : int32_t {
+ /**
+ * Cell is not a serving cell.
+ */
+ NONE = 0,
+ /**
+ * UE has connection to cell for signalling and possibly data (3GPP 36.331, 25.331).
+ */
+ PRIMARY_SERVING,
+ /**
+ * UE has connection to cell for data (3GPP 36.331, 25.331).
+ */
+ SECONDARY_SERVING,
+};
+
+/**
+ * Overwritten from @1.0::IndicationFilter in order to redefine ALL. In the future, this should
+ * be extended instead of overwritten.
+ */
+enum IndicationFilter : int32_t {
+ NONE = 0,
+ ALL = ~0,
+ /**
+ * When this bit is set, modem must send the signal strength update through
+ * IRadioIndication.currentSignalStrength() when all criteria specified by
+ * IRadio.setSignalStrengthReportingCriteria() are met.
+ */
+ SIGNAL_STRENGTH = 1 << 0,
+ /**
+ * When this bit is set, modem must invoke IRadioIndication.networkStateChanged() when any field
+ * in VoiceRegStateResult or DataRegStateResult changes. When this bit is not set, modem must
+ * suppress IRadioIndication.networkStateChanged() when there are only changes from
+ * insignificant fields. Modem must invoke IRadioIndication.networkStateChanged() when
+ * significant fields are updated regardless of whether this bit is set.
+ *
+ * The following fields are considered significant: VoiceRegStateResult.regState,
+ * VoiceRegStateResult.rat, DataRegStateResult.regState, DataRegStateResult.rat.
+ */
+ FULL_NETWORK_STATE = 1 << 1,
+ /**
+ * When this bit is set, modem must send IRadioIndication.dataCallListChanged() whenever any
+ * field in ITypes.SetupDataCallResult changes. When this bit is not set, modem must suppress
+ * the indication when the only changed field is 'active' (for data dormancy). For all other
+ * field changes, the modem must send IRadioIndication.dataCallListChanged() regardless of
+ * whether this bit is set.
+ */
+ DATA_CALL_DORMANCY_CHANGED = 1 << 2,
+ /**
+ * When this bit is set, modem must send the link capacity update through
+ * IRadioIndication.currentLinkCapacityEstimate() when all criteria specified by
+ * IRadio.setLinkCapacityReportingCriteria() are met.
+ */
+ LINK_CAPACITY_ESTIMATE = 1 << 3,
+ /**
+ * When this bit is set, the modem must send the physical channel configuration update through
+ * IRadioIndication.currentPhysicalChannelConfigs() when the configuration has changed. It is
+ * recommended that this be reported whenever link capacity or signal strength is reported.
+ */
+ PHYSICAL_CHANNEL_CONFIG = 1 << 4,
+};
+
struct NetworkScanRequest {
ScanType type;
@@ -156,6 +217,10 @@
struct CellIdentityLte {
@1.0::CellIdentityLte base;
CellIdentityOperatorNames operatorNames;
+ /**
+ * Cell bandwidth, in kHz.
+ */
+ int32_t bandwidth;
};
struct CellIdentityWcdma {
@@ -222,6 +287,10 @@
* Valid only if type = tdscdma and size = 1 else must be empty.
*/
vec<CellInfoTdscdma> tdscdma;
+ /**
+ * Connection status for the cell.
+ */
+ CellConnectionStatus connectionStatus;
};
struct CardStatus {
@@ -244,3 +313,25 @@
*/
string iccid;
};
+
+struct LinkCapacityEstimate {
+ /**
+ * Estimated downlink capacity in kbps.
+ */
+ uint32_t downlinkCapacityKbps;
+ /**
+ * Estimated uplink capacity in kbps.
+ */
+ uint32_t uplinkCapacityKbps;
+};
+
+struct PhysicalChannelConfig {
+ /**
+ * Connection status for cell. Valid values are PRIMARY_SERVING and SECONDARY_SERVING.
+ */
+ CellConnectionStatus status;
+ /**
+ * Cell bandwidth, in kHz.
+ */
+ int32_t cellBandwidthDownlink;
+};
diff --git a/radio/config/1.0/default/Android.bp b/radio/config/1.0/default/Android.bp
new file mode 100644
index 0000000..f52335e
--- /dev/null
+++ b/radio/config/1.0/default/Android.bp
@@ -0,0 +1,20 @@
+cc_binary {
+ name: "android.hardware.radio.config@1.0-service",
+ init_rc: ["android.hardware.radio.config@1.0-service.rc"],
+ relative_install_path: "hw",
+ vendor: true,
+ srcs: [
+ "RadioConfig.cpp",
+ "RadioConfigIndication.cpp",
+ "RadioConfigResponse.cpp",
+ "service.cpp",
+ ],
+ shared_libs: [
+ "libhidlbase",
+ "libhidltransport",
+ "liblog",
+ "libutils",
+ "android.hardware.radio.config@1.0",
+ "android.hardware.radio@1.0",
+ ],
+}
diff --git a/radio/config/1.0/default/RadioConfig.cpp b/radio/config/1.0/default/RadioConfig.cpp
new file mode 100644
index 0000000..af4b77e
--- /dev/null
+++ b/radio/config/1.0/default/RadioConfig.cpp
@@ -0,0 +1,56 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.1 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.1
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "RadioConfig.h"
+
+namespace android {
+namespace hardware {
+namespace radio {
+namespace config {
+namespace V1_0 {
+namespace implementation {
+
+using namespace ::android::hardware::radio::config::V1_0;
+
+// Methods from ::android::hardware::radio::config::V1_0::IRadioConfig follow.
+Return<void> RadioConfig::setResponseFunctions(
+ const sp<IRadioConfigResponse>& radioConfigResponse,
+ const sp<IRadioConfigIndication>& radioConfigIndication) {
+ mRadioConfigResponse = radioConfigResponse;
+ mRadioConfigIndication = radioConfigIndication;
+ return Void();
+}
+
+Return<void> RadioConfig::getSimSlotsStatus(int32_t /* serial */) {
+ hidl_vec<SimSlotStatus> slotStatus;
+ ::android::hardware::radio::V1_0::RadioResponseInfo info;
+ mRadioConfigResponse->getSimSlotsStatusResponse(info, slotStatus);
+ return Void();
+}
+
+Return<void> RadioConfig::setSimSlotsMapping(int32_t /* serial */,
+ const hidl_vec<uint32_t>& /* slotMap */) {
+ ::android::hardware::radio::V1_0::RadioResponseInfo info;
+ mRadioConfigResponse->setSimSlotsMappingResponse(info);
+ return Void();
+}
+
+} // namespace implementation
+} // namespace V1_0
+} // namespace config
+} // namespace radio
+} // namespace hardware
+} // namespace android
diff --git a/radio/config/1.0/default/RadioConfig.h b/radio/config/1.0/default/RadioConfig.h
new file mode 100644
index 0000000..0f0ac75
--- /dev/null
+++ b/radio/config/1.0/default/RadioConfig.h
@@ -0,0 +1,59 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.1 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.1
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef ANDROID_HARDWARE_RADIO_CONFIG_V1_0_RADIOCONFIG_H
+#define ANDROID_HARDWARE_RADIO_CONFIG_V1_0_RADIOCONFIG_H
+
+#include <android/hardware/radio/config/1.0/IRadioConfig.h>
+#include <hidl/MQDescriptor.h>
+#include <hidl/Status.h>
+
+namespace android {
+namespace hardware {
+namespace radio {
+namespace config {
+namespace V1_0 {
+namespace implementation {
+
+using ::android::hardware::hidl_array;
+using ::android::hardware::hidl_memory;
+using ::android::hardware::hidl_string;
+using ::android::hardware::hidl_vec;
+using ::android::hardware::Return;
+using ::android::hardware::Void;
+using ::android::sp;
+
+struct RadioConfig : public IRadioConfig {
+ sp<IRadioConfigResponse> mRadioConfigResponse;
+ sp<IRadioConfigIndication> mRadioConfigIndication;
+ // Methods from ::android::hardware::radio::config::V1_0::IRadioConfig follow.
+ Return<void> setResponseFunctions(
+ const sp<::android::hardware::radio::config::V1_0::IRadioConfigResponse>&
+ radioConfigResponse,
+ const sp<::android::hardware::radio::config::V1_0::IRadioConfigIndication>&
+ radioConfigIndication) override;
+ Return<void> getSimSlotsStatus(int32_t serial) override;
+ Return<void> setSimSlotsMapping(int32_t serial, const hidl_vec<uint32_t>& slotMap) override;
+};
+
+} // namespace implementation
+} // namespace V1_0
+} // namespace config
+} // namespace radio
+} // namespace hardware
+} // namespace android
+
+#endif // ANDROID_HARDWARE_RADIO_CONFIG_V1_0_RADIOCONFIG_H
diff --git a/radio/config/1.0/default/RadioConfigIndication.cpp b/radio/config/1.0/default/RadioConfigIndication.cpp
new file mode 100644
index 0000000..1005ca3
--- /dev/null
+++ b/radio/config/1.0/default/RadioConfigIndication.cpp
@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.1 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.1
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "RadioConfigIndication.h"
+
+namespace android {
+namespace hardware {
+namespace radio {
+namespace config {
+namespace V1_0 {
+namespace implementation {
+
+using namespace ::android::hardware::radio::V1_0;
+
+// Methods from ::android::hardware::radio::config::V1_0::IRadioConfigIndication follow.
+Return<void> RadioConfigIndication::simSlotsStatusChanged(
+ RadioIndicationType /* type */, const hidl_vec<SimSlotStatus>& /* slotStatus */) {
+ // TODO implement
+ return Void();
+}
+
+} // namespace implementation
+} // namespace V1_0
+} // namespace config
+} // namespace radio
+} // namespace hardware
+} // namespace android
diff --git a/radio/config/1.0/default/RadioConfigIndication.h b/radio/config/1.0/default/RadioConfigIndication.h
new file mode 100644
index 0000000..cfab1e6
--- /dev/null
+++ b/radio/config/1.0/default/RadioConfigIndication.h
@@ -0,0 +1,54 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.1 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.1
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef ANDROID_HARDWARE_RADIO_CONFIG_V1_0_RADIOCONFIGINDICATION_H
+#define ANDROID_HARDWARE_RADIO_CONFIG_V1_0_RADIOCONFIGINDICATION_H
+
+#include <android/hardware/radio/config/1.0/IRadioConfigIndication.h>
+#include <hidl/MQDescriptor.h>
+#include <hidl/Status.h>
+
+namespace android {
+namespace hardware {
+namespace radio {
+namespace config {
+namespace V1_0 {
+namespace implementation {
+
+using ::android::hardware::hidl_array;
+using ::android::hardware::hidl_memory;
+using ::android::hardware::hidl_string;
+using ::android::hardware::hidl_vec;
+using ::android::hardware::Return;
+using ::android::hardware::Void;
+using ::android::sp;
+
+struct RadioConfigIndication : public IRadioConfigIndication {
+ // Methods from ::android::hardware::radio::config::V1_0::IRadioConfigIndication follow.
+ Return<void> simSlotsStatusChanged(
+ ::android::hardware::radio::V1_0::RadioIndicationType type,
+ const hidl_vec<::android::hardware::radio::config::V1_0::SimSlotStatus>& slotStatus)
+ override;
+};
+
+} // namespace implementation
+} // namespace V1_0
+} // namespace config
+} // namespace radio
+} // namespace hardware
+} // namespace android
+
+#endif // ANDROID_HARDWARE_RADIO_CONFIG_V1_0_RADIOCONFIGINDICATION_H
diff --git a/radio/config/1.0/default/RadioConfigResponse.cpp b/radio/config/1.0/default/RadioConfigResponse.cpp
new file mode 100644
index 0000000..029eab2
--- /dev/null
+++ b/radio/config/1.0/default/RadioConfigResponse.cpp
@@ -0,0 +1,46 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.1 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.1
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "RadioConfigResponse.h"
+
+namespace android {
+namespace hardware {
+namespace radio {
+namespace config {
+namespace V1_0 {
+namespace implementation {
+
+using namespace ::android::hardware::radio::V1_0;
+using namespace ::android::hardware::radio::config::V1_0;
+
+// Methods from ::android::hardware::radio::config::V1_0::IRadioConfigResponse follow.
+Return<void> RadioConfigResponse::getSimSlotsStatusResponse(
+ const RadioResponseInfo& /* info */, const hidl_vec<SimSlotStatus>& /* slotStatus */) {
+ // TODO implement
+ return Void();
+}
+
+Return<void> RadioConfigResponse::setSimSlotsMappingResponse(const RadioResponseInfo& /* info */) {
+ // TODO implement
+ return Void();
+}
+
+} // namespace implementation
+} // namespace V1_0
+} // namespace config
+} // namespace radio
+} // namespace hardware
+} // namespace android
diff --git a/radio/config/1.0/default/RadioConfigResponse.h b/radio/config/1.0/default/RadioConfigResponse.h
new file mode 100644
index 0000000..7d121fd
--- /dev/null
+++ b/radio/config/1.0/default/RadioConfigResponse.h
@@ -0,0 +1,56 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.1 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.1
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef ANDROID_HARDWARE_RADIO_CONFIG_V1_0_RADIOCONFIGRESPONSE_H
+#define ANDROID_HARDWARE_RADIO_CONFIG_V1_0_RADIOCONFIGRESPONSE_H
+
+#include <android/hardware/radio/config/1.0/IRadioConfigResponse.h>
+#include <hidl/MQDescriptor.h>
+#include <hidl/Status.h>
+
+namespace android {
+namespace hardware {
+namespace radio {
+namespace config {
+namespace V1_0 {
+namespace implementation {
+
+using ::android::hardware::hidl_array;
+using ::android::hardware::hidl_memory;
+using ::android::hardware::hidl_string;
+using ::android::hardware::hidl_vec;
+using ::android::hardware::Return;
+using ::android::hardware::Void;
+using ::android::sp;
+
+struct RadioConfigResponse : public IRadioConfigResponse {
+ // Methods from ::android::hardware::radio::config::V1_0::IRadioConfigResponse follow.
+ Return<void> getSimSlotsStatusResponse(
+ const ::android::hardware::radio::V1_0::RadioResponseInfo& info,
+ const hidl_vec<::android::hardware::radio::config::V1_0::SimSlotStatus>& slotStatus)
+ override;
+ Return<void> setSimSlotsMappingResponse(
+ const ::android::hardware::radio::V1_0::RadioResponseInfo& info) override;
+};
+
+} // namespace implementation
+} // namespace V1_0
+} // namespace config
+} // namespace radio
+} // namespace hardware
+} // namespace android
+
+#endif // ANDROID_HARDWARE_RADIO_CONFIG_V1_0_RADIOCONFIGRESPONSE_H
diff --git a/radio/config/1.0/default/android.hardware.radio.config@1.0-service.rc b/radio/config/1.0/default/android.hardware.radio.config@1.0-service.rc
new file mode 100644
index 0000000..fad16b1
--- /dev/null
+++ b/radio/config/1.0/default/android.hardware.radio.config@1.0-service.rc
@@ -0,0 +1,4 @@
+service vendor.radio-config-hal-1-0 /vendor/bin/hw/android.hardware.radio.config@1.0-service
+ class hal
+ user system
+ group system
diff --git a/radio/config/1.0/default/service.cpp b/radio/config/1.0/default/service.cpp
new file mode 100644
index 0000000..a06cc22
--- /dev/null
+++ b/radio/config/1.0/default/service.cpp
@@ -0,0 +1,42 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.1 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.1
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#define LOG_TAG "android.hardware.radio.config@1.0-service"
+
+#include <android/hardware/radio/config/1.0/IRadioConfig.h>
+#include <hidl/HidlTransportSupport.h>
+
+#include "RadioConfig.h"
+
+using android::hardware::configureRpcThreadpool;
+using android::hardware::joinRpcThreadpool;
+using android::hardware::radio::config::V1_0::IRadioConfig;
+using android::hardware::radio::config::V1_0::implementation::RadioConfig;
+using android::sp;
+using android::status_t;
+using android::OK;
+
+int main() {
+ configureRpcThreadpool(1, true);
+
+ sp<IRadioConfig> radioConfig = new RadioConfig;
+ status_t status = radioConfig->registerAsService();
+ ALOGW_IF(status != OK, "Could not register IRadioConfig");
+ ALOGD("Default service is ready.");
+
+ joinRpcThreadpool();
+ return 0;
+}
\ No newline at end of file