diff --git a/PREUPLOAD.cfg b/PREUPLOAD.cfg
index 0140275..6740bb5 100644
--- a/PREUPLOAD.cfg
+++ b/PREUPLOAD.cfg
@@ -2,6 +2,7 @@
 ignore_merged_commits = true
 
 [Builtin Hooks]
+bpfmt = true
 clang_format = true
 
 [Hook Scripts]
diff --git a/current.txt b/current.txt
index e2f12ed..6ef2e71 100644
--- a/current.txt
+++ b/current.txt
@@ -604,8 +604,8 @@
 619fc9839ec6e369cfa9b28e3e9412e6885720ff8f9b5750c1b6ffb905120391 android.hardware.wifi.supplicant@1.3::ISupplicantStaIfaceCallback
 c9273429fcf98d797d3bb07fdba6f1be95bf960f9255cde169fd1ca4db85f856 android.hardware.wifi.supplicant@1.3::ISupplicantStaNetwork
 9b0a3ab6f4f74b971ed094426d8a443e29b512ff03e1ab50c07156396cdb2483 android.hardware.wifi.supplicant@1.3::types
-35cd6586225912718c599421606d69260707e43732d874f2064e28de45c87fac android.hardware.radio@1.5::types
-3f1e2410d9bed4e7d41c6a589fe3a7943bc904b0066e40e0199a7c58427ac4e9 android.hardware.radio@1.5::IRadio
+eaf870a7439838c66127a74e1896c4a2346979c116eb1931785ebb4d353230ae android.hardware.radio@1.5::types
+584001c25a16e3a29d496cff28dee690833cd2bda5376febe01cecd476ce876f android.hardware.radio@1.5::IRadio
 3afac66f21a33bc9c4b80481c7d5540038348651d9a7d8af64ea13610af138da android.hardware.radio@1.5::IRadioIndication
 caf00e0d942b77b17d7061b38de11e5b19e1da90d4818434cb4916ba89e30686 android.hardware.radio@1.5::IRadioResponse
 55f0a15642869ec98a55ea0a5ac049d3e1a6245ff7750deb6bcb7182057eee83 android.hardware.radio.config@1.3::types
diff --git a/keymaster/3.0/vts/functional/Android.bp b/keymaster/3.0/vts/functional/Android.bp
index 69aa56d..36a6861 100644
--- a/keymaster/3.0/vts/functional/Android.bp
+++ b/keymaster/3.0/vts/functional/Android.bp
@@ -29,5 +29,5 @@
         "libcrypto_static",
         "libsoftkeymasterdevice",
     ],
-    test_suites: ["general-tests"],
+    test_suites: ["general-tests", "vts-core"],
 }
diff --git a/keymaster/3.0/vts/functional/AndroidTest.xml b/keymaster/3.0/vts/functional/AndroidTest.xml
new file mode 100644
index 0000000..71e41fc
--- /dev/null
+++ b/keymaster/3.0/vts/functional/AndroidTest.xml
@@ -0,0 +1,33 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2019 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+<configuration description="Runs VtsHalKeymasterV3_0TargetTest.">
+    <option name="test-suite-tag" value="apct" />
+    <option name="test-suite-tag" value="apct-native" />
+
+    <target_preparer class="com.android.tradefed.targetprep.RootTargetPreparer">
+    </target_preparer>
+
+    <target_preparer class="com.android.tradefed.targetprep.PushFilePreparer">
+        <option name="cleanup" value="true" />
+        <option name="push" value="VtsHalKeymasterV3_0TargetTest->/data/local/tmp/VtsHalKeymasterV3_0TargetTest" />
+    </target_preparer>
+
+    <test class="com.android.tradefed.testtype.GTest" >
+        <option name="native-test-device-path" value="/data/local/tmp" />
+        <option name="module-name" value="VtsHalKeymasterV3_0TargetTest" />
+        <option name="native-test-timeout" value="900000"/>
+    </test>
+</configuration>
diff --git a/keymaster/3.0/vts/functional/keymaster_hidl_hal_test.cpp b/keymaster/3.0/vts/functional/keymaster_hidl_hal_test.cpp
index ccb5622..ae32764 100644
--- a/keymaster/3.0/vts/functional/keymaster_hidl_hal_test.cpp
+++ b/keymaster/3.0/vts/functional/keymaster_hidl_hal_test.cpp
@@ -25,17 +25,15 @@
 
 #include <android/hardware/keymaster/3.0/IKeymasterDevice.h>
 #include <android/hardware/keymaster/3.0/types.h>
-
 #include <cutils/properties.h>
-
+#include <gtest/gtest.h>
+#include <hidl/GtestPrinter.h>
+#include <hidl/ServiceManagement.h>
 #include <keymaster/keymaster_configuration.h>
 
 #include "authorization_set.h"
 #include "key_param_output.h"
 
-#include <VtsHalHidlTargetTestBase.h>
-#include <VtsHalHidlTargetTestEnvBase.h>
-
 #include "attestation_record.h"
 #include "openssl_utils.h"
 
@@ -413,33 +411,19 @@
 
 }  // namespace
 
-// Test environment for Keymaster HIDL HAL.
-class KeymasterHidlEnvironment : public ::testing::VtsHalHidlTargetTestEnvBase {
-   public:
-    // get the test environment singleton
-    static KeymasterHidlEnvironment* Instance() {
-        static KeymasterHidlEnvironment* instance = new KeymasterHidlEnvironment;
-        return instance;
-    }
-
-    virtual void registerTestServices() override { registerTestService<IKeymasterDevice>(); }
-   private:
-    KeymasterHidlEnvironment() {}
-};
-
-class KeymasterHidlTest : public ::testing::VtsHalHidlTargetTestBase {
+class KeymasterHidlTest : public ::testing::TestWithParam<std::string> {
   public:
     void TearDown() override {
         if (key_blob_.size()) {
             CheckedDeleteKey();
         }
         AbortIfNeeded();
+
+        keymaster_.clear();
     }
 
-    // SetUpTestCase runs only once per test case, not once per test.
-    static void SetUpTestCase() {
-        keymaster_ = ::testing::VtsHalHidlTargetTestBase::getService<IKeymasterDevice>(
-            KeymasterHidlEnvironment::Instance()->getServiceName<IKeymasterDevice>());
+    void SetUp() override {
+        keymaster_ = IKeymasterDevice::getService(GetParam());
         ASSERT_NE(keymaster_, nullptr);
 
         ASSERT_TRUE(
@@ -461,11 +445,9 @@
         os_patch_level_ = ::keymaster::GetOsPatchlevel();
     }
 
-    static void TearDownTestCase() { keymaster_.clear(); }
-
-    static IKeymasterDevice& keymaster() { return *keymaster_; }
-    static uint32_t os_version() { return os_version_; }
-    static uint32_t os_patch_level() { return os_patch_level_; }
+    IKeymasterDevice& keymaster() { return *keymaster_; }
+    uint32_t os_version() { return os_version_; }
+    uint32_t os_patch_level() { return os_patch_level_; }
 
     AuthorizationSet UserAuths() { return AuthorizationSetBuilder().Authorization(TAG_USER_ID, 7); }
 
@@ -929,134 +911,121 @@
         }
     }
 
-    static bool IsSecure() { return is_secure_; }
-    static bool SupportsEc() { return supports_ec_; }
-    static bool SupportsSymmetric() { return supports_symmetric_; }
-    static bool SupportsAllDigests() { return supports_all_digests_; }
-    static bool SupportsAttestation() { return supports_attestation_; }
+    bool IsSecure() { return is_secure_; }
+    bool SupportsEc() { return supports_ec_; }
+    bool SupportsSymmetric() { return supports_symmetric_; }
+    bool SupportsAllDigests() { return supports_all_digests_; }
+    bool SupportsAttestation() { return supports_attestation_; }
 
-    static bool Km2Profile() {
+    bool Km2Profile() {
         return SupportsAttestation() && SupportsAllDigests() && SupportsSymmetric() &&
                SupportsEc() && IsSecure();
     }
 
-    static bool Km1Profile() {
+    bool Km1Profile() {
         return !SupportsAttestation() && SupportsSymmetric() && SupportsEc() && IsSecure();
     }
 
-    static bool Km0Profile() {
+    bool Km0Profile() {
         return !SupportsAttestation() && !SupportsAllDigests() && !SupportsSymmetric() &&
                IsSecure();
     }
 
-    static bool SwOnlyProfile() {
+    bool SwOnlyProfile() {
         return !SupportsAttestation() && !SupportsAllDigests() && !SupportsSymmetric() &&
                !SupportsEc() && !IsSecure();
     }
 
+    bool verify_attestation_record(const string& challenge, const string& app_id,
+                                   AuthorizationSet expected_sw_enforced,
+                                   AuthorizationSet expected_tee_enforced,
+                                   const hidl_vec<uint8_t>& attestation_cert) {
+        X509_Ptr cert(parse_cert_blob(attestation_cert));
+        EXPECT_TRUE(!!cert.get());
+        if (!cert.get()) return false;
+
+        ASN1_OCTET_STRING* attest_rec = get_attestation_record(cert.get());
+        EXPECT_TRUE(!!attest_rec);
+        if (!attest_rec) return false;
+
+        AuthorizationSet att_sw_enforced;
+        AuthorizationSet att_tee_enforced;
+        uint32_t att_attestation_version;
+        uint32_t att_keymaster_version;
+        SecurityLevel att_attestation_security_level;
+        SecurityLevel att_keymaster_security_level;
+        HidlBuf att_challenge;
+        HidlBuf att_unique_id;
+        HidlBuf att_app_id;
+        EXPECT_EQ(ErrorCode::OK,
+                  parse_attestation_record(attest_rec->data,                 //
+                                           attest_rec->length,               //
+                                           &att_attestation_version,         //
+                                           &att_attestation_security_level,  //
+                                           &att_keymaster_version,           //
+                                           &att_keymaster_security_level,    //
+                                           &att_challenge,                   //
+                                           &att_sw_enforced,                 //
+                                           &att_tee_enforced,                //
+                                           &att_unique_id));
+
+        EXPECT_TRUE(att_attestation_version == 1 || att_attestation_version == 2);
+
+        expected_sw_enforced.push_back(TAG_ATTESTATION_APPLICATION_ID, HidlBuf(app_id));
+
+        if (!IsSecure()) {
+            // SW is KM3
+            EXPECT_EQ(att_keymaster_version, 3U);
+        }
+
+        if (SupportsSymmetric()) {
+            EXPECT_GE(att_keymaster_version, 1U);
+        }
+
+        if (SupportsAttestation()) {
+            EXPECT_GE(att_keymaster_version, 2U);
+        }
+
+        EXPECT_EQ(IsSecure() ? SecurityLevel::TRUSTED_ENVIRONMENT : SecurityLevel::SOFTWARE,
+                  att_keymaster_security_level);
+        EXPECT_EQ(SupportsAttestation() ? SecurityLevel::TRUSTED_ENVIRONMENT
+                                        : SecurityLevel::SOFTWARE,
+                  att_attestation_security_level);
+
+        EXPECT_EQ(challenge.length(), att_challenge.size());
+        EXPECT_EQ(0, memcmp(challenge.data(), att_challenge.data(), challenge.length()));
+
+        att_sw_enforced.Sort();
+        expected_sw_enforced.Sort();
+        EXPECT_EQ(filter_tags(expected_sw_enforced), filter_tags(att_sw_enforced))
+                << "(Possibly b/38394619)";
+
+        att_tee_enforced.Sort();
+        expected_tee_enforced.Sort();
+        EXPECT_EQ(filter_tags(expected_tee_enforced), filter_tags(att_tee_enforced))
+                << "(Possibly b/38394619)";
+
+        return true;
+    }
+
     HidlBuf key_blob_;
     KeyCharacteristics key_characteristics_;
     OperationHandle op_handle_ = kOpHandleSentinel;
 
   private:
-    static sp<IKeymasterDevice> keymaster_;
-    static uint32_t os_version_;
-    static uint32_t os_patch_level_;
+    sp<IKeymasterDevice> keymaster_;
+    uint32_t os_version_;
+    uint32_t os_patch_level_;
 
-    static bool is_secure_;
-    static bool supports_ec_;
-    static bool supports_symmetric_;
-    static bool supports_attestation_;
-    static bool supports_all_digests_;
-    static hidl_string name_;
-    static hidl_string author_;
+    bool is_secure_;
+    bool supports_ec_;
+    bool supports_symmetric_;
+    bool supports_attestation_;
+    bool supports_all_digests_;
+    hidl_string name_;
+    hidl_string author_;
 };
 
-bool verify_attestation_record(const string& challenge, const string& app_id,
-                               AuthorizationSet expected_sw_enforced,
-                               AuthorizationSet expected_tee_enforced,
-                               const hidl_vec<uint8_t>& attestation_cert) {
-    X509_Ptr cert(parse_cert_blob(attestation_cert));
-    EXPECT_TRUE(!!cert.get());
-    if (!cert.get()) return false;
-
-    ASN1_OCTET_STRING* attest_rec = get_attestation_record(cert.get());
-    EXPECT_TRUE(!!attest_rec);
-    if (!attest_rec) return false;
-
-    AuthorizationSet att_sw_enforced;
-    AuthorizationSet att_tee_enforced;
-    uint32_t att_attestation_version;
-    uint32_t att_keymaster_version;
-    SecurityLevel att_attestation_security_level;
-    SecurityLevel att_keymaster_security_level;
-    HidlBuf att_challenge;
-    HidlBuf att_unique_id;
-    HidlBuf att_app_id;
-    EXPECT_EQ(ErrorCode::OK,
-              parse_attestation_record(attest_rec->data,                 //
-                                       attest_rec->length,               //
-                                       &att_attestation_version,         //
-                                       &att_attestation_security_level,  //
-                                       &att_keymaster_version,           //
-                                       &att_keymaster_security_level,    //
-                                       &att_challenge,                   //
-                                       &att_sw_enforced,                 //
-                                       &att_tee_enforced,                //
-                                       &att_unique_id));
-
-    EXPECT_TRUE(att_attestation_version == 1 || att_attestation_version == 2);
-
-    expected_sw_enforced.push_back(TAG_ATTESTATION_APPLICATION_ID,
-                                   HidlBuf(app_id));
-
-    if (!KeymasterHidlTest::IsSecure()) {
-        // SW is KM3
-        EXPECT_EQ(att_keymaster_version, 3U);
-    }
-
-    if (KeymasterHidlTest::SupportsSymmetric()) {
-        EXPECT_GE(att_keymaster_version, 1U);
-    }
-
-    if (KeymasterHidlTest::SupportsAttestation()) {
-        EXPECT_GE(att_keymaster_version, 2U);
-    }
-
-    EXPECT_EQ(KeymasterHidlTest::IsSecure() ? SecurityLevel::TRUSTED_ENVIRONMENT
-                                            : SecurityLevel::SOFTWARE,
-              att_keymaster_security_level);
-    EXPECT_EQ(KeymasterHidlTest::SupportsAttestation() ? SecurityLevel::TRUSTED_ENVIRONMENT
-                                                       : SecurityLevel::SOFTWARE,
-              att_attestation_security_level);
-
-    EXPECT_EQ(challenge.length(), att_challenge.size());
-    EXPECT_EQ(0, memcmp(challenge.data(), att_challenge.data(), challenge.length()));
-
-    att_sw_enforced.Sort();
-    expected_sw_enforced.Sort();
-    EXPECT_EQ(filter_tags(expected_sw_enforced), filter_tags(att_sw_enforced))
-        << "(Possibly b/38394619)";
-
-    att_tee_enforced.Sort();
-    expected_tee_enforced.Sort();
-    EXPECT_EQ(filter_tags(expected_tee_enforced), filter_tags(att_tee_enforced))
-        << "(Possibly b/38394619)";
-
-    return true;
-}
-
-sp<IKeymasterDevice> KeymasterHidlTest::keymaster_;
-uint32_t KeymasterHidlTest::os_version_;
-uint32_t KeymasterHidlTest::os_patch_level_;
-bool KeymasterHidlTest::is_secure_;
-bool KeymasterHidlTest::supports_ec_;
-bool KeymasterHidlTest::supports_symmetric_;
-bool KeymasterHidlTest::supports_all_digests_;
-bool KeymasterHidlTest::supports_attestation_;
-hidl_string KeymasterHidlTest::name_;
-hidl_string KeymasterHidlTest::author_;
-
 typedef KeymasterHidlTest KeymasterVersionTest;
 
 /*
@@ -1065,7 +1034,7 @@
  * Queries keymaster to find the set of features it supports. Fails if the combination doesn't
  * correspond to any well-defined keymaster version.
  */
-TEST_F(KeymasterVersionTest, SensibleFeatures) {
+TEST_P(KeymasterVersionTest, SensibleFeatures) {
     EXPECT_TRUE(Km2Profile() || Km1Profile() || Km0Profile() || SwOnlyProfile())
         << "Keymaster feature set doesn't fit any reasonable profile.  Reported features:"
         << "SupportsAttestation [" << SupportsAttestation() << "], "
@@ -1124,7 +1093,7 @@
  * Verifies that keymaster can generate all required RSA key sizes, and that the resulting keys have
  * correct characteristics.
  */
-TEST_F(NewKeyGenerationTest, Rsa) {
+TEST_P(NewKeyGenerationTest, Rsa) {
     for (auto key_size : {1024, 2048, 3072, 4096}) {
         HidlBuf key_blob;
         KeyCharacteristics key_characteristics;
@@ -1158,7 +1127,7 @@
  *
  * Verifies that failing to specify a key size for RSA key generation returns UNSUPPORTED_KEY_SIZE.
  */
-TEST_F(NewKeyGenerationTest, RsaNoDefaultSize) {
+TEST_P(NewKeyGenerationTest, RsaNoDefaultSize) {
     ASSERT_EQ(ErrorCode::UNSUPPORTED_KEY_SIZE,
               GenerateKey(AuthorizationSetBuilder()
                               .Authorization(TAG_ALGORITHM, Algorithm::RSA)
@@ -1172,7 +1141,7 @@
  * Verifies that keymaster can generate all required EC key sizes, and that the resulting keys have
  * correct characteristics.
  */
-TEST_F(NewKeyGenerationTest, Ecdsa) {
+TEST_P(NewKeyGenerationTest, Ecdsa) {
     for (auto key_size : {224, 256, 384, 521}) {
         HidlBuf key_blob;
         KeyCharacteristics key_characteristics;
@@ -1203,7 +1172,7 @@
  *
  * Verifies that failing to specify a key size for EC key generation returns UNSUPPORTED_KEY_SIZE.
  */
-TEST_F(NewKeyGenerationTest, EcdsaDefaultSize) {
+TEST_P(NewKeyGenerationTest, EcdsaDefaultSize) {
     ASSERT_EQ(ErrorCode::UNSUPPORTED_KEY_SIZE,
               GenerateKey(AuthorizationSetBuilder()
                               .Authorization(TAG_ALGORITHM, Algorithm::EC)
@@ -1217,7 +1186,7 @@
  * Verifies that failing to specify an invalid key size for EC key generation returns
  * UNSUPPORTED_KEY_SIZE.
  */
-TEST_F(NewKeyGenerationTest, EcdsaInvalidSize) {
+TEST_P(NewKeyGenerationTest, EcdsaInvalidSize) {
     ASSERT_EQ(ErrorCode::UNSUPPORTED_KEY_SIZE,
               GenerateKey(AuthorizationSetBuilder().EcdsaSigningKey(190).Digest(Digest::NONE)));
 }
@@ -1228,7 +1197,7 @@
  * Verifies that specifying mismatched key size and curve for EC key generation returns
  * INVALID_ARGUMENT.
  */
-TEST_F(NewKeyGenerationTest, EcdsaMismatchKeySize) {
+TEST_P(NewKeyGenerationTest, EcdsaMismatchKeySize) {
     ASSERT_EQ(ErrorCode::INVALID_ARGUMENT,
               GenerateKey(AuthorizationSetBuilder()
                               .EcdsaSigningKey(224)
@@ -1237,7 +1206,7 @@
         << "(Possibly b/36233343)";
 }
 
-TEST_F(NewKeyGenerationTest, EcdsaAllValidSizes) {
+TEST_P(NewKeyGenerationTest, EcdsaAllValidSizes) {
     size_t valid_sizes[] = {224, 256, 384, 521};
     for (size_t size : valid_sizes) {
         EXPECT_EQ(ErrorCode::OK,
@@ -1252,7 +1221,7 @@
  *
  * Verifies that keymaster supports all required EC curves.
  */
-TEST_F(NewKeyGenerationTest, EcdsaAllValidCurves) {
+TEST_P(NewKeyGenerationTest, EcdsaAllValidCurves) {
     EcCurve curves[] = {EcCurve::P_224, EcCurve::P_256, EcCurve::P_384, EcCurve::P_521};
     for (auto curve : curves) {
         EXPECT_EQ(
@@ -1269,7 +1238,7 @@
  * Verifies that keymaster supports all required digests, and that the resulting keys have correct
  * characteristics.
  */
-TEST_F(NewKeyGenerationTest, Hmac) {
+TEST_P(NewKeyGenerationTest, Hmac) {
     for (auto digest : {Digest::MD5, Digest::SHA1, Digest::SHA_2_224, Digest::SHA_2_256,
                         Digest::SHA_2_384, Digest::SHA_2_512}) {
         HidlBuf key_blob;
@@ -1318,7 +1287,7 @@
  *
  * Verifies that keymaster supports all key sizes, and rejects all invalid key sizes.
  */
-TEST_F(NewKeyGenerationTest, HmacCheckKeySizes) {
+TEST_P(NewKeyGenerationTest, HmacCheckKeySizes) {
     for (size_t key_size = 0; key_size <= 512; ++key_size) {
         if (key_size < 64 || key_size % 8 != 0) {
             // To keep this test from being very slow, we only test a random fraction of non-byte
@@ -1349,7 +1318,7 @@
  * test is probabilistic in order to keep the runtime down, but any failure prints out the specific
  * MAC length that failed, so reproducing a failed run will be easy.
  */
-TEST_F(NewKeyGenerationTest, HmacCheckMinMacLengths) {
+TEST_P(NewKeyGenerationTest, HmacCheckMinMacLengths) {
     for (size_t min_mac_length = 0; min_mac_length <= 256; ++min_mac_length) {
         if (min_mac_length < 64 || min_mac_length % 8 != 0) {
             // To keep this test from being very long, we only test a random fraction of non-byte
@@ -1379,7 +1348,7 @@
  *
  * Verifies that keymaster rejects HMAC key generation with multiple specified digest algorithms.
  */
-TEST_F(NewKeyGenerationTest, HmacMultipleDigests) {
+TEST_P(NewKeyGenerationTest, HmacMultipleDigests) {
     ASSERT_EQ(ErrorCode::UNSUPPORTED_DIGEST,
               GenerateKey(AuthorizationSetBuilder()
                               .HmacKey(128)
@@ -1393,7 +1362,7 @@
  *
  * Verifies that keymaster rejects HMAC key generation with no digest or Digest::NONE
  */
-TEST_F(NewKeyGenerationTest, HmacDigestNone) {
+TEST_P(NewKeyGenerationTest, HmacDigestNone) {
     ASSERT_EQ(
         ErrorCode::UNSUPPORTED_DIGEST,
         GenerateKey(AuthorizationSetBuilder().HmacKey(128).Authorization(TAG_MIN_MAC_LENGTH, 128)));
@@ -1413,7 +1382,7 @@
  * Verifies that getKeyCharacteristics functions, and that generated and retrieved key
  * characteristics match.
  */
-TEST_F(GetKeyCharacteristicsTest, SimpleRsa) {
+TEST_P(GetKeyCharacteristicsTest, SimpleRsa) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .RsaSigningKey(1024, 3)
                                              .Digest(Digest::NONE)
@@ -1438,7 +1407,7 @@
  *
  * Verifies that raw RSA signature operations succeed.
  */
-TEST_F(SigningOperationsTest, RsaSuccess) {
+TEST_P(SigningOperationsTest, RsaSuccess) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .RsaSigningKey(1024, 3)
                                              .Digest(Digest::NONE)
@@ -1454,7 +1423,7 @@
  *
  * Verifies that RSA-PSS signature operations succeed.
  */
-TEST_F(SigningOperationsTest, RsaPssSha256Success) {
+TEST_P(SigningOperationsTest, RsaPssSha256Success) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .RsaSigningKey(1024, 3)
                                              .Digest(Digest::SHA_2_256)
@@ -1472,7 +1441,7 @@
  * Verifies that keymaster rejects signature operations that specify a padding mode when the key
  * supports only unpadded operations.
  */
-TEST_F(SigningOperationsTest, RsaPaddingNoneDoesNotAllowOther) {
+TEST_P(SigningOperationsTest, RsaPaddingNoneDoesNotAllowOther) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .RsaSigningKey(1024, 3)
                                              .Digest(Digest::NONE)
@@ -1492,7 +1461,7 @@
  *
  * Verifies that digested RSA-PKCS1 signature operations succeed.
  */
-TEST_F(SigningOperationsTest, RsaPkcs1Sha256Success) {
+TEST_P(SigningOperationsTest, RsaPkcs1Sha256Success) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .RsaSigningKey(1024, 3)
                                              .Digest(Digest::SHA_2_256)
@@ -1509,7 +1478,7 @@
  *
  * Verifies that undigested RSA-PKCS1 signature operations succeed.
  */
-TEST_F(SigningOperationsTest, RsaPkcs1NoDigestSuccess) {
+TEST_P(SigningOperationsTest, RsaPkcs1NoDigestSuccess) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .RsaSigningKey(1024, 3)
                                              .Digest(Digest::NONE)
@@ -1527,7 +1496,7 @@
  * Verifies that undigested RSA-PKCS1 signature operations fail with the correct error code when
  * given a too-long message.
  */
-TEST_F(SigningOperationsTest, RsaPkcs1NoDigestTooLong) {
+TEST_P(SigningOperationsTest, RsaPkcs1NoDigestTooLong) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .RsaSigningKey(1024, 3)
                                              .Digest(Digest::NONE)
@@ -1555,7 +1524,7 @@
  * uses SHA512, which has a digest_size == 512, so the message size is 1040 bits, too large for a
  * 1024-bit key.
  */
-TEST_F(SigningOperationsTest, RsaPssSha512TooSmallKey) {
+TEST_P(SigningOperationsTest, RsaPssSha512TooSmallKey) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .RsaSigningKey(1024, 3)
                                              .Digest(Digest::SHA_2_512)
@@ -1574,7 +1543,7 @@
  * Verifies that raw RSA signature operations fail with the correct error code when
  * given a too-long message.
  */
-TEST_F(SigningOperationsTest, RsaNoPaddingTooLong) {
+TEST_P(SigningOperationsTest, RsaNoPaddingTooLong) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .RsaSigningKey(1024, 3)
                                              .Digest(Digest::NONE)
@@ -1608,7 +1577,7 @@
  * Verifies that operations can be aborted correctly.  Uses an RSA signing operation for the test,
  * but the behavior should be algorithm and purpose-independent.
  */
-TEST_F(SigningOperationsTest, RsaAbort) {
+TEST_P(SigningOperationsTest, RsaAbort) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .RsaSigningKey(1024, 3)
                                              .Digest(Digest::NONE)
@@ -1633,7 +1602,7 @@
  * Verifies that RSA operations fail with the correct error (but key gen succeeds) when used with a
  * padding mode inappropriate for RSA.
  */
-TEST_F(SigningOperationsTest, RsaUnsupportedPadding) {
+TEST_P(SigningOperationsTest, RsaUnsupportedPadding) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .RsaSigningKey(1024, 3)
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
@@ -1650,7 +1619,7 @@
  *
  * Verifies that RSA PSS operations fail when no digest is used.  PSS requires a digest.
  */
-TEST_F(SigningOperationsTest, RsaNoDigest) {
+TEST_P(SigningOperationsTest, RsaNoDigest) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .RsaSigningKey(1024, 3)
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
@@ -1670,7 +1639,7 @@
  * Verifies that RSA operations fail when no padding mode is specified.  PaddingMode::NONE is
  * supported in some cases (as validated in other tests), but a mode must be specified.
  */
-TEST_F(SigningOperationsTest, RsaNoPadding) {
+TEST_P(SigningOperationsTest, RsaNoPadding) {
     // Padding must be specified
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .RsaKey(1024, 3)
@@ -1686,7 +1655,7 @@
  *
  * Verifies that raw RSA signatures succeed with a message shorter than the key size.
  */
-TEST_F(SigningOperationsTest, RsaTooShortMessage) {
+TEST_P(SigningOperationsTest, RsaTooShortMessage) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .RsaSigningKey(1024, 3)
@@ -1707,7 +1676,7 @@
  *
  * Verifies that RSA encryption keys cannot be used to sign.
  */
-TEST_F(SigningOperationsTest, RsaSignWithEncryptionKey) {
+TEST_P(SigningOperationsTest, RsaSignWithEncryptionKey) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .RsaEncryptionKey(1024, 3)
@@ -1724,7 +1693,7 @@
  * Verifies that attempting a raw signature of a message which is the same length as the key, but
  * numerically larger than the public modulus, fails with the correct error.
  */
-TEST_F(SigningOperationsTest, RsaSignTooLargeMessage) {
+TEST_P(SigningOperationsTest, RsaSignTooLargeMessage) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .RsaSigningKey(1024, 3)
@@ -1746,7 +1715,7 @@
  *
  * Verifies that ECDSA operations succeed with all possible key sizes and hashes.
  */
-TEST_F(SigningOperationsTest, EcdsaAllSizesAndHashes) {
+TEST_P(SigningOperationsTest, EcdsaAllSizesAndHashes) {
     for (auto key_size : {224, 256, 384, 521}) {
         for (auto digest : {
                  Digest::SHA1, Digest::SHA_2_224, Digest::SHA_2_256, Digest::SHA_2_384,
@@ -1773,7 +1742,7 @@
  *
  * Verifies that ECDSA operations succeed with all possible curves.
  */
-TEST_F(SigningOperationsTest, EcdsaAllCurves) {
+TEST_P(SigningOperationsTest, EcdsaAllCurves) {
     for (auto curve : {EcCurve::P_224, EcCurve::P_256, EcCurve::P_384, EcCurve::P_521}) {
         ErrorCode error = GenerateKey(AuthorizationSetBuilder()
                                           .Authorization(TAG_NO_AUTH_REQUIRED)
@@ -1795,7 +1764,7 @@
  * work because ECDSA actually only signs the leftmost L_n bits of the message, however large it may
  * be.  Not using digesting is a bad idea, but in some cases digesting is done by the framework.
  */
-TEST_F(SigningOperationsTest, EcdsaNoDigestHugeData) {
+TEST_P(SigningOperationsTest, EcdsaNoDigestHugeData) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .EcdsaSigningKey(224)
@@ -1809,7 +1778,7 @@
  *
  * Verifies that attempts to use AES keys to sign fail in the correct way.
  */
-TEST_F(SigningOperationsTest, AesEcbSign) {
+TEST_P(SigningOperationsTest, AesEcbSign) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .SigningKey()
@@ -1832,7 +1801,7 @@
  *
  * Verifies that HMAC works with all digests.
  */
-TEST_F(SigningOperationsTest, HmacAllDigests) {
+TEST_P(SigningOperationsTest, HmacAllDigests) {
     for (auto digest : {Digest::SHA1, Digest::SHA_2_224, Digest::SHA_2_256, Digest::SHA_2_384,
                         Digest::SHA_2_512}) {
         ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
@@ -1855,7 +1824,7 @@
  * Verifies that HMAC fails in the correct way when asked to generate a MAC larger than the digest
  * size.
  */
-TEST_F(SigningOperationsTest, HmacSha256TooLargeMacLength) {
+TEST_P(SigningOperationsTest, HmacSha256TooLargeMacLength) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .HmacKey(128)
@@ -1876,7 +1845,7 @@
  * Verifies that HMAC fails in the correct way when asked to generate a MAC smaller than the
  * specified minimum MAC length.
  */
-TEST_F(SigningOperationsTest, HmacSha256TooSmallMacLength) {
+TEST_P(SigningOperationsTest, HmacSha256TooSmallMacLength) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .HmacKey(128)
@@ -1896,7 +1865,7 @@
  *
  * Validates against the test vectors from RFC 4231 test case 3.
  */
-TEST_F(SigningOperationsTest, HmacRfc4231TestCase3) {
+TEST_P(SigningOperationsTest, HmacRfc4231TestCase3) {
     string key(20, 0xaa);
     string message(50, 0xdd);
     uint8_t sha_224_expected[] = {
@@ -1933,7 +1902,7 @@
  *
  * Validates against the test vectors from RFC 4231 test case 5.
  */
-TEST_F(SigningOperationsTest, HmacRfc4231TestCase5) {
+TEST_P(SigningOperationsTest, HmacRfc4231TestCase5) {
     string key(20, 0x0c);
     string message = "Test With Truncation";
 
@@ -1965,7 +1934,7 @@
  *
  * Validates against the test vectors from RFC 4231 test case 6.
  */
-TEST_F(SigningOperationsTest, HmacRfc4231TestCase6) {
+TEST_P(SigningOperationsTest, HmacRfc4231TestCase6) {
     string key(131, 0xaa);
     string message = "Test Using Larger Than Block-Size Key - Hash Key First";
 
@@ -2003,7 +1972,7 @@
  *
  * Validates against the test vectors from RFC 4231 test case 7.
  */
-TEST_F(SigningOperationsTest, HmacRfc4231TestCase7) {
+TEST_P(SigningOperationsTest, HmacRfc4231TestCase7) {
     string key(131, 0xaa);
     string message = "This is a test using a larger than block-size key and a larger than "
                      "block-size data. The key needs to be hashed before being used by the HMAC "
@@ -2045,7 +2014,7 @@
  *
  * Verifies that a simple RSA signature/verification sequence succeeds.
  */
-TEST_F(VerificationOperationsTest, RsaSuccess) {
+TEST_P(VerificationOperationsTest, RsaSuccess) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .RsaSigningKey(1024, 3)
@@ -2063,7 +2032,7 @@
  *
  * Verifies RSA signature/verification for all padding modes and digests.
  */
-TEST_F(VerificationOperationsTest, RsaAllPaddingsAndDigests) {
+TEST_P(VerificationOperationsTest, RsaAllPaddingsAndDigests) {
     ASSERT_EQ(ErrorCode::OK,
               GenerateKey(AuthorizationSetBuilder()
                               .Authorization(TAG_NO_AUTH_REQUIRED)
@@ -2159,7 +2128,7 @@
  *
  * Verifies ECDSA signature/verification for all digests and curves.
  */
-TEST_F(VerificationOperationsTest, EcdsaAllDigestsAndCurves) {
+TEST_P(VerificationOperationsTest, EcdsaAllDigestsAndCurves) {
     auto digests = {
         Digest::NONE,      Digest::SHA1,      Digest::SHA_2_224,
         Digest::SHA_2_256, Digest::SHA_2_384, Digest::SHA_2_512,
@@ -2242,7 +2211,7 @@
  *
  * Verifies HMAC signing and verification, but that a signing key cannot be used to verify.
  */
-TEST_F(VerificationOperationsTest, HmacSigningKeyCannotVerify) {
+TEST_P(VerificationOperationsTest, HmacSigningKeyCannotVerify) {
     string key_material = "HelloThisIsAKey";
 
     HidlBuf signing_key, verification_key;
@@ -2290,7 +2259,7 @@
  *
  * Verifies that attempting to export RSA keys in PKCS#8 format fails with the correct error.
  */
-TEST_F(ExportKeyTest, RsaUnsupportedKeyFormat) {
+TEST_P(ExportKeyTest, RsaUnsupportedKeyFormat) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .RsaSigningKey(1024, 3)
                                              .Digest(Digest::NONE)
@@ -2305,7 +2274,7 @@
  * Verifies that attempting to export RSA keys from corrupted key blobs fails.  This is essentially
  * a poor-man's key blob fuzzer.
  */
-TEST_F(ExportKeyTest, RsaCorruptedKeyBlob) {
+TEST_P(ExportKeyTest, RsaCorruptedKeyBlob) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .RsaSigningKey(1024, 3)
@@ -2328,7 +2297,7 @@
  * Verifies that attempting to export ECDSA keys from corrupted key blobs fails.  This is
  * essentially a poor-man's key blob fuzzer.
  */
-TEST_F(ExportKeyTest, EcCorruptedKeyBlob) {
+TEST_P(ExportKeyTest, EcCorruptedKeyBlob) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .EcdsaSigningKey(EcCurve::P_256)
@@ -2349,7 +2318,7 @@
  *
  * Verifies that attempting to export AES keys fails in the expected way.
  */
-TEST_F(ExportKeyTest, AesKeyUnexportable) {
+TEST_P(ExportKeyTest, AesKeyUnexportable) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .AesEncryptionKey(128)
@@ -2368,7 +2337,7 @@
  *
  * Verifies that importing and using an RSA key pair works correctly.
  */
-TEST_F(ImportKeyTest, RsaSuccess) {
+TEST_P(ImportKeyTest, RsaSuccess) {
     ASSERT_EQ(ErrorCode::OK, ImportKey(AuthorizationSetBuilder()
                                            .Authorization(TAG_NO_AUTH_REQUIRED)
                                            .RsaSigningKey(1024, 65537)
@@ -2395,7 +2364,7 @@
  * Verifies that importing an RSA key pair with a size that doesn't match the key fails in the
  * correct way.
  */
-TEST_F(ImportKeyTest, RsaKeySizeMismatch) {
+TEST_P(ImportKeyTest, RsaKeySizeMismatch) {
     ASSERT_EQ(ErrorCode::IMPORT_PARAMETER_MISMATCH,
               ImportKey(AuthorizationSetBuilder()
                             .RsaSigningKey(2048 /* Doesn't match key */, 65537)
@@ -2410,7 +2379,7 @@
  * Verifies that importing an RSA key pair with a public exponent that doesn't match the key fails
  * in the correct way.
  */
-TEST_F(ImportKeyTest, RsaPublicExponentMismatch) {
+TEST_P(ImportKeyTest, RsaPublicExponentMismatch) {
     ASSERT_EQ(ErrorCode::IMPORT_PARAMETER_MISMATCH,
               ImportKey(AuthorizationSetBuilder()
                             .RsaSigningKey(1024, 3 /* Doesn't match key */)
@@ -2424,7 +2393,7 @@
  *
  * Verifies that importing and using an ECDSA P-256 key pair works correctly.
  */
-TEST_F(ImportKeyTest, EcdsaSuccess) {
+TEST_P(ImportKeyTest, EcdsaSuccess) {
     ASSERT_EQ(ErrorCode::OK, ImportKey(AuthorizationSetBuilder()
                                            .Authorization(TAG_NO_AUTH_REQUIRED)
                                            .EcdsaSigningKey(256)
@@ -2450,7 +2419,7 @@
  *
  * Verifies that importing and using an ECDSA P-521 key pair works correctly.
  */
-TEST_F(ImportKeyTest, Ecdsa521Success) {
+TEST_P(ImportKeyTest, Ecdsa521Success) {
     ASSERT_EQ(ErrorCode::OK, ImportKey(AuthorizationSetBuilder()
                                            .Authorization(TAG_NO_AUTH_REQUIRED)
                                            .EcdsaSigningKey(521)
@@ -2477,7 +2446,7 @@
  * Verifies that importing an ECDSA key pair with a size that doesn't match the key fails in the
  * correct way.
  */
-TEST_F(ImportKeyTest, EcdsaSizeMismatch) {
+TEST_P(ImportKeyTest, EcdsaSizeMismatch) {
     ASSERT_EQ(ErrorCode::IMPORT_PARAMETER_MISMATCH,
               ImportKey(AuthorizationSetBuilder()
                             .EcdsaSigningKey(224 /* Doesn't match key */)
@@ -2491,7 +2460,7 @@
  * Verifies that importing an ECDSA key pair with a curve that doesn't match the key fails in the
  * correct way.
  */
-TEST_F(ImportKeyTest, EcdsaCurveMismatch) {
+TEST_P(ImportKeyTest, EcdsaCurveMismatch) {
     if (SupportsSymmetric() && !SupportsAttestation()) {
         // KM1 hardware doesn't know about curves
         return;
@@ -2510,7 +2479,7 @@
  *
  * Verifies that importing and using an AES key works.
  */
-TEST_F(ImportKeyTest, AesSuccess) {
+TEST_P(ImportKeyTest, AesSuccess) {
     string key = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
     ASSERT_EQ(ErrorCode::OK, ImportKey(AuthorizationSetBuilder()
                                            .Authorization(TAG_NO_AUTH_REQUIRED)
@@ -2537,7 +2506,7 @@
  *
  * Verifies that importing and using an HMAC key works.
  */
-TEST_F(ImportKeyTest, HmacKeySuccess) {
+TEST_P(ImportKeyTest, HmacKeySuccess) {
     string key = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
     ASSERT_EQ(ErrorCode::OK, ImportKey(AuthorizationSetBuilder()
                                            .Authorization(TAG_NO_AUTH_REQUIRED)
@@ -2563,7 +2532,7 @@
  *
  * Verifies that raw RSA encryption works.
  */
-TEST_F(EncryptionOperationsTest, RsaNoPaddingSuccess) {
+TEST_P(EncryptionOperationsTest, RsaNoPaddingSuccess) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .RsaEncryptionKey(1024, 3)
@@ -2586,7 +2555,7 @@
  *
  * Verifies that raw RSA encryption of short messages works.
  */
-TEST_F(EncryptionOperationsTest, RsaNoPaddingShortMessage) {
+TEST_P(EncryptionOperationsTest, RsaNoPaddingShortMessage) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .RsaEncryptionKey(1024, 3)
@@ -2615,7 +2584,7 @@
  *
  * Verifies that raw RSA encryption of too-long messages fails in the expected way.
  */
-TEST_F(EncryptionOperationsTest, RsaNoPaddingTooLong) {
+TEST_P(EncryptionOperationsTest, RsaNoPaddingTooLong) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .RsaEncryptionKey(1024, 3)
@@ -2635,7 +2604,7 @@
  *
  * Verifies that raw RSA encryption of too-large (numerically) messages fails in the expected way.
  */
-TEST_F(EncryptionOperationsTest, RsaNoPaddingTooLarge) {
+TEST_P(EncryptionOperationsTest, RsaNoPaddingTooLarge) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .RsaEncryptionKey(1024, 3)
@@ -2677,7 +2646,7 @@
  *
  * Verifies that RSA-OAEP encryption operations work, with all digests.
  */
-TEST_F(EncryptionOperationsTest, RsaOaepSuccess) {
+TEST_P(EncryptionOperationsTest, RsaOaepSuccess) {
     auto digests = {Digest::MD5,       Digest::SHA1,      Digest::SHA_2_224,
                     Digest::SHA_2_256, Digest::SHA_2_384, Digest::SHA_2_512};
 
@@ -2729,7 +2698,7 @@
  * Verifies that RSA-OAEP encryption operations fail in the correct way when asked to operate
  * without a digest.
  */
-TEST_F(EncryptionOperationsTest, RsaOaepInvalidDigest) {
+TEST_P(EncryptionOperationsTest, RsaOaepInvalidDigest) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .RsaEncryptionKey(1024, 3)
@@ -2747,7 +2716,7 @@
  * Verifies that RSA-OAEP encryption operations fail in the correct way when asked to decrypt with a
  * different digest than was used to encrypt.
  */
-TEST_F(EncryptionOperationsTest, RsaOaepDecryptWithWrongDigest) {
+TEST_P(EncryptionOperationsTest, RsaOaepDecryptWithWrongDigest) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .RsaEncryptionKey(1024, 3)
@@ -2773,7 +2742,7 @@
  * Verifies that RSA-OAEP encryption operations fail in the correct way when asked to encrypt a
  * too-large message.
  */
-TEST_F(EncryptionOperationsTest, RsaOaepTooLarge) {
+TEST_P(EncryptionOperationsTest, RsaOaepTooLarge) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .RsaEncryptionKey(1024, 3)
@@ -2796,7 +2765,7 @@
  *
  * Verifies that RSA PKCS encryption/decrypts works.
  */
-TEST_F(EncryptionOperationsTest, RsaPkcs1Success) {
+TEST_P(EncryptionOperationsTest, RsaPkcs1Success) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .RsaEncryptionKey(1024, 3)
@@ -2835,7 +2804,7 @@
  *
  * Verifies that RSA PKCS encryption fails in the correct way when the mssage is too large.
  */
-TEST_F(EncryptionOperationsTest, RsaPkcs1TooLarge) {
+TEST_P(EncryptionOperationsTest, RsaPkcs1TooLarge) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .RsaEncryptionKey(1024, 3)
@@ -2855,7 +2824,7 @@
  *
  * Verifies that attempting to use ECDSA keys to encrypt fails in the correct way.
  */
-TEST_F(EncryptionOperationsTest, EcdsaEncrypt) {
+TEST_P(EncryptionOperationsTest, EcdsaEncrypt) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .EcdsaSigningKey(224)
@@ -2872,7 +2841,7 @@
  *
  * Verifies that attempting to use HMAC keys to encrypt fails in the correct way.
  */
-TEST_F(EncryptionOperationsTest, HmacEncrypt) {
+TEST_P(EncryptionOperationsTest, HmacEncrypt) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .HmacKey(128)
@@ -2894,7 +2863,7 @@
  *
  * Verifies that AES ECB mode works.
  */
-TEST_F(EncryptionOperationsTest, AesEcbRoundTripSuccess) {
+TEST_P(EncryptionOperationsTest, AesEcbRoundTripSuccess) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .AesEncryptionKey(128)
@@ -2923,7 +2892,7 @@
  *
  * Verifies that AES encryption fails in the correct way when an unauthorized mode is specified.
  */
-TEST_F(EncryptionOperationsTest, AesWrongMode) {
+TEST_P(EncryptionOperationsTest, AesWrongMode) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .AesEncryptionKey(128)
@@ -2943,7 +2912,7 @@
  * Verifies that AES encryption fails in the correct way when provided an input that is not a
  * multiple of the block size and no padding is specified.
  */
-TEST_F(EncryptionOperationsTest, AesEcbNoPaddingWrongInputSize) {
+TEST_P(EncryptionOperationsTest, AesEcbNoPaddingWrongInputSize) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .AesEncryptionKey(128)
@@ -2964,7 +2933,7 @@
  *
  * Verifies that AES PKCS7 padding works for any message length.
  */
-TEST_F(EncryptionOperationsTest, AesEcbPkcs7Padding) {
+TEST_P(EncryptionOperationsTest, AesEcbPkcs7Padding) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .AesEncryptionKey(128)
@@ -2989,7 +2958,7 @@
  * Verifies that AES enryption fails in the correct way when an unauthorized padding mode is
  * specified.
  */
-TEST_F(EncryptionOperationsTest, AesEcbWrongPadding) {
+TEST_P(EncryptionOperationsTest, AesEcbWrongPadding) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .AesEncryptionKey(128)
@@ -3010,7 +2979,7 @@
  *
  * Verifies that AES decryption fails in the correct way when the padding is corrupted.
  */
-TEST_F(EncryptionOperationsTest, AesEcbPkcs7PaddingCorrupted) {
+TEST_P(EncryptionOperationsTest, AesEcbPkcs7PaddingCorrupted) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .AesEncryptionKey(128)
@@ -3041,7 +3010,7 @@
  *
  * Verifies that AES CTR mode works.
  */
-TEST_F(EncryptionOperationsTest, AesCtrRoundTripSuccess) {
+TEST_P(EncryptionOperationsTest, AesCtrRoundTripSuccess) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .AesEncryptionKey(128)
@@ -3088,7 +3057,7 @@
  *
  * Verifies that AES works, all modes, when provided data in various size increments.
  */
-TEST_F(EncryptionOperationsTest, AesIncremental) {
+TEST_P(EncryptionOperationsTest, AesIncremental) {
     auto block_modes = {
         BlockMode::ECB, BlockMode::CBC, BlockMode::CTR, BlockMode::GCM,
     };
@@ -3226,7 +3195,7 @@
  *
  * Verifies AES CTR implementation against SP800-38A test vectors.
  */
-TEST_F(EncryptionOperationsTest, AesCtrSp80038aTestVector) {
+TEST_P(EncryptionOperationsTest, AesCtrSp80038aTestVector) {
     for (size_t i = 0; i < 3; i++) {
         const AesCtrSp80038aTestVector& test(kAesCtrSp80038aTestVectors[i]);
         const string key = hex2str(test.key);
@@ -3242,7 +3211,7 @@
  *
  * Verifies that keymaster rejects use of CTR mode with PKCS7 padding in the correct way.
  */
-TEST_F(EncryptionOperationsTest, AesCtrIncompatiblePaddingMode) {
+TEST_P(EncryptionOperationsTest, AesCtrIncompatiblePaddingMode) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .AesEncryptionKey(128)
@@ -3257,7 +3226,7 @@
  *
  * Verifies that keymaster fails correctly when the user supplies an incorrect-size nonce.
  */
-TEST_F(EncryptionOperationsTest, AesCtrInvalidCallerNonce) {
+TEST_P(EncryptionOperationsTest, AesCtrInvalidCallerNonce) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .AesEncryptionKey(128)
@@ -3289,7 +3258,7 @@
  *
  * Verifies that keymaster fails correctly when the user supplies an incorrect-size nonce.
  */
-TEST_F(EncryptionOperationsTest, AesCbcRoundTripSuccess) {
+TEST_P(EncryptionOperationsTest, AesCbcRoundTripSuccess) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .AesEncryptionKey(128)
@@ -3322,7 +3291,7 @@
  *
  * Verifies that AES caller-provided nonces work correctly.
  */
-TEST_F(EncryptionOperationsTest, AesCallerNonce) {
+TEST_P(EncryptionOperationsTest, AesCallerNonce) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .AesEncryptionKey(128)
@@ -3371,7 +3340,7 @@
  * Verifies that caller-provided nonces are not permitted when not specified in the key
  * authorizations.
  */
-TEST_F(EncryptionOperationsTest, AesCallerNonceProhibited) {
+TEST_P(EncryptionOperationsTest, AesCallerNonceProhibited) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .AesEncryptionKey(128)
@@ -3406,7 +3375,7 @@
  *
  * Verifies that AES GCM mode works.
  */
-TEST_F(EncryptionOperationsTest, AesGcmRoundTripSuccess) {
+TEST_P(EncryptionOperationsTest, AesGcmRoundTripSuccess) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .AesEncryptionKey(128)
@@ -3454,7 +3423,7 @@
  *
  * Verifies that AES GCM mode fails correctly when a too-short tag length is specified.
  */
-TEST_F(EncryptionOperationsTest, AesGcmTooShortTag) {
+TEST_P(EncryptionOperationsTest, AesGcmTooShortTag) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .AesEncryptionKey(128)
@@ -3475,7 +3444,7 @@
  *
  * Verifies that AES GCM mode fails correctly when a too-short tag is provided to decryption.
  */
-TEST_F(EncryptionOperationsTest, AesGcmTooShortTagOnDecrypt) {
+TEST_P(EncryptionOperationsTest, AesGcmTooShortTagOnDecrypt) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .AesEncryptionKey(128)
@@ -3518,7 +3487,7 @@
  *
  * Verifies that AES GCM mode fails correctly when the decryption key is incorrect.
  */
-TEST_F(EncryptionOperationsTest, AesGcmCorruptKey) {
+TEST_P(EncryptionOperationsTest, AesGcmCorruptKey) {
     const uint8_t nonce_bytes[] = {
         0xb7, 0x94, 0x37, 0xae, 0x08, 0xff, 0x35, 0x5d, 0x7d, 0x8a, 0x4d, 0x0f,
     };
@@ -3570,7 +3539,7 @@
  * Verifies that AES GCM mode works when provided additional authenticated data, but no data to
  * encrypt.
  */
-TEST_F(EncryptionOperationsTest, AesGcmAadNoData) {
+TEST_P(EncryptionOperationsTest, AesGcmAadNoData) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .AesEncryptionKey(128)
@@ -3616,7 +3585,7 @@
  *
  * Verifies that AES GCM mode works when provided additional authenticated data in multiple chunks.
  */
-TEST_F(EncryptionOperationsTest, AesGcmMultiPartAad) {
+TEST_P(EncryptionOperationsTest, AesGcmMultiPartAad) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .AesEncryptionKey(128)
@@ -3675,7 +3644,7 @@
  *
  * Verifies that AES GCM mode fails correctly when given AAD after data to encipher.
  */
-TEST_F(EncryptionOperationsTest, AesGcmAadOutOfOrder) {
+TEST_P(EncryptionOperationsTest, AesGcmAadOutOfOrder) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .AesEncryptionKey(128)
@@ -3724,7 +3693,7 @@
  *
  * Verifies that AES GCM decryption fails correctly when additional authenticated date is wrong.
  */
-TEST_F(EncryptionOperationsTest, AesGcmBadAad) {
+TEST_P(EncryptionOperationsTest, AesGcmBadAad) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .AesEncryptionKey(128)
@@ -3768,7 +3737,7 @@
  *
  * Verifies that AES GCM decryption fails correctly when the nonce is incorrect.
  */
-TEST_F(EncryptionOperationsTest, AesGcmWrongNonce) {
+TEST_P(EncryptionOperationsTest, AesGcmWrongNonce) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .AesEncryptionKey(128)
@@ -3812,7 +3781,7 @@
  *
  * Verifies that AES GCM decryption fails correctly when the tag is wrong.
  */
-TEST_F(EncryptionOperationsTest, AesGcmCorruptTag) {
+TEST_P(EncryptionOperationsTest, AesGcmCorruptTag) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .AesEncryptionKey(128)
@@ -3862,7 +3831,7 @@
  *
  * Verifies that the max uses per boot tag works correctly with AES keys.
  */
-TEST_F(MaxOperationsTest, TestLimitAes) {
+TEST_P(MaxOperationsTest, TestLimitAes) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .AesEncryptionKey(128)
@@ -3887,7 +3856,7 @@
  *
  * Verifies that the max uses per boot tag works correctly with RSA keys.
  */
-TEST_F(MaxOperationsTest, TestLimitRsa) {
+TEST_P(MaxOperationsTest, TestLimitRsa) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .RsaSigningKey(1024, 3)
@@ -3914,7 +3883,7 @@
  * Verifies that the addRngEntropy method doesn't blow up.  There's no way to test that entropy is
  * actually added.
  */
-TEST_F(AddEntropyTest, AddEntropy) {
+TEST_P(AddEntropyTest, AddEntropy) {
     EXPECT_EQ(ErrorCode::OK, keymaster().addRngEntropy(HidlBuf("foo")));
 }
 
@@ -3923,7 +3892,7 @@
  *
  * Verifies that the addRngEntropy method doesn't blow up when given an empty buffer.
  */
-TEST_F(AddEntropyTest, AddEmptyEntropy) {
+TEST_P(AddEntropyTest, AddEmptyEntropy) {
     EXPECT_EQ(ErrorCode::OK, keymaster().addRngEntropy(HidlBuf()));
 }
 
@@ -3932,7 +3901,7 @@
  *
  * Verifies that the addRngEntropy method doesn't blow up when given a largish amount of data.
  */
-TEST_F(AddEntropyTest, AddLargeEntropy) {
+TEST_P(AddEntropyTest, AddLargeEntropy) {
     EXPECT_EQ(ErrorCode::OK, keymaster().addRngEntropy(HidlBuf(string(2 * 1024, 'a'))));
 }
 
@@ -3943,7 +3912,7 @@
  *
  * Verifies that attesting to RSA keys works and generates the expected output.
  */
-TEST_F(AttestationTest, RsaAttestation) {
+TEST_P(AttestationTest, RsaAttestation) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .RsaSigningKey(1024, 3)
@@ -3971,7 +3940,7 @@
  *
  * Verifies that attesting to RSA requires app ID.
  */
-TEST_F(AttestationTest, RsaAttestationRequiresAppId) {
+TEST_P(AttestationTest, RsaAttestationRequiresAppId) {
     ASSERT_EQ(ErrorCode::OK,
               GenerateKey(AuthorizationSetBuilder()
                               .Authorization(TAG_NO_AUTH_REQUIRED)
@@ -3992,7 +3961,7 @@
  *
  * Verifies that attesting to EC keys works and generates the expected output.
  */
-TEST_F(AttestationTest, EcAttestation) {
+TEST_P(AttestationTest, EcAttestation) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .EcdsaSigningKey(EcCurve::P_256)
@@ -4020,7 +3989,7 @@
  *
  * Verifies that attesting to EC keys requires app ID
  */
-TEST_F(AttestationTest, EcAttestationRequiresAttestationAppId) {
+TEST_P(AttestationTest, EcAttestationRequiresAttestationAppId) {
     ASSERT_EQ(ErrorCode::OK,
               GenerateKey(AuthorizationSetBuilder()
                               .Authorization(TAG_NO_AUTH_REQUIRED)
@@ -4040,7 +4009,7 @@
  *
  * Verifies that attesting to AES keys fails in the expected way.
  */
-TEST_F(AttestationTest, AesAttestation) {
+TEST_P(AttestationTest, AesAttestation) {
     ASSERT_EQ(ErrorCode::OK,
               GenerateKey(AuthorizationSetBuilder()
                               .Authorization(TAG_NO_AUTH_REQUIRED)
@@ -4063,7 +4032,7 @@
  *
  * Verifies that attesting to HMAC keys fails in the expected way.
  */
-TEST_F(AttestationTest, HmacAttestation) {
+TEST_P(AttestationTest, HmacAttestation) {
     ASSERT_EQ(ErrorCode::OK,
               GenerateKey(AuthorizationSetBuilder()
                               .Authorization(TAG_NO_AUTH_REQUIRED)
@@ -4090,7 +4059,7 @@
  * This test checks that if rollback protection is implemented, DeleteKey invalidates a formerly
  * valid key blob.
  */
-TEST_F(KeyDeletionTest, DeleteKey) {
+TEST_P(KeyDeletionTest, DeleteKey) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .RsaSigningKey(1024, 3)
                                              .Digest(Digest::NONE)
@@ -4135,7 +4104,7 @@
  *
  * This test checks that the HAL excepts invalid key blobs.
  */
-TEST_F(KeyDeletionTest, DeleteInvalidKey) {
+TEST_P(KeyDeletionTest, DeleteInvalidKey) {
     // Generate key just to check if rollback protection is implemented
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .RsaSigningKey(1024, 3)
@@ -4172,7 +4141,7 @@
  * been provisioned. Use this test only on dedicated testing devices that have no valuable
  * credentials stored in Keystore/Keymaster.
  */
-TEST_F(KeyDeletionTest, DeleteAllKeys) {
+TEST_P(KeyDeletionTest, DeleteAllKeys) {
     if (!arm_deleteAllKeys) return;
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .RsaSigningKey(1024, 3)
@@ -4207,6 +4176,45 @@
     key_blob_ = HidlBuf();
 }
 
+static const auto kKeymasterDeviceChoices =
+        testing::ValuesIn(android::hardware::getAllHalInstanceNames(IKeymasterDevice::descriptor));
+
+INSTANTIATE_TEST_SUITE_P(PerInstance, NewKeyGenerationTest, kKeymasterDeviceChoices,
+                         android::hardware::PrintInstanceNameToString);
+
+INSTANTIATE_TEST_SUITE_P(PerInstance, KeymasterVersionTest, kKeymasterDeviceChoices,
+                         android::hardware::PrintInstanceNameToString);
+
+INSTANTIATE_TEST_SUITE_P(PerInstance, GetKeyCharacteristicsTest, kKeymasterDeviceChoices,
+                         android::hardware::PrintInstanceNameToString);
+
+INSTANTIATE_TEST_SUITE_P(PerInstance, SigningOperationsTest, kKeymasterDeviceChoices,
+                         android::hardware::PrintInstanceNameToString);
+
+INSTANTIATE_TEST_SUITE_P(PerInstance, VerificationOperationsTest, kKeymasterDeviceChoices,
+                         android::hardware::PrintInstanceNameToString);
+
+INSTANTIATE_TEST_SUITE_P(PerInstance, ExportKeyTest, kKeymasterDeviceChoices,
+                         android::hardware::PrintInstanceNameToString);
+
+INSTANTIATE_TEST_SUITE_P(PerInstance, ImportKeyTest, kKeymasterDeviceChoices,
+                         android::hardware::PrintInstanceNameToString);
+
+INSTANTIATE_TEST_SUITE_P(PerInstance, EncryptionOperationsTest, kKeymasterDeviceChoices,
+                         android::hardware::PrintInstanceNameToString);
+
+INSTANTIATE_TEST_SUITE_P(PerInstance, MaxOperationsTest, kKeymasterDeviceChoices,
+                         android::hardware::PrintInstanceNameToString);
+
+INSTANTIATE_TEST_SUITE_P(PerInstance, AddEntropyTest, kKeymasterDeviceChoices,
+                         android::hardware::PrintInstanceNameToString);
+
+INSTANTIATE_TEST_SUITE_P(PerInstance, AttestationTest, kKeymasterDeviceChoices,
+                         android::hardware::PrintInstanceNameToString);
+
+INSTANTIATE_TEST_SUITE_P(PerInstance, KeyDeletionTest, kKeymasterDeviceChoices,
+                         android::hardware::PrintInstanceNameToString);
+
 }  // namespace test
 }  // namespace V3_0
 }  // namespace keymaster
@@ -4214,10 +4222,7 @@
 }  // namespace android
 
 int main(int argc, char** argv) {
-    using android::hardware::keymaster::V3_0::test::KeymasterHidlEnvironment;
-    ::testing::AddGlobalTestEnvironment(KeymasterHidlEnvironment::Instance());
     ::testing::InitGoogleTest(&argc, argv);
-    KeymasterHidlEnvironment::Instance()->init(&argc, argv);
     for (int i = 1; i < argc; ++i) {
         if (argv[i][0] == '-') {
             if (std::string(argv[i]) == "--arm_deleteAllKeys") {
diff --git a/keymaster/4.0/vts/functional/Android.bp b/keymaster/4.0/vts/functional/Android.bp
index 0401362..5649f20 100644
--- a/keymaster/4.0/vts/functional/Android.bp
+++ b/keymaster/4.0/vts/functional/Android.bp
@@ -29,5 +29,5 @@
         "libkeymaster4support",
         "libsoftkeymasterdevice",
     ],
-    test_suites: ["general-tests"],
+    test_suites: ["general-tests", "vts-core"],
 }
diff --git a/keymaster/4.0/vts/functional/AndroidTest.xml b/keymaster/4.0/vts/functional/AndroidTest.xml
new file mode 100644
index 0000000..dcf7129
--- /dev/null
+++ b/keymaster/4.0/vts/functional/AndroidTest.xml
@@ -0,0 +1,33 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2019 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+<configuration description="Runs VtsHalKeymasterV4_0TargetTest.">
+    <option name="test-suite-tag" value="apct" />
+    <option name="test-suite-tag" value="apct-native" />
+
+    <target_preparer class="com.android.tradefed.targetprep.RootTargetPreparer">
+    </target_preparer>
+
+    <target_preparer class="com.android.tradefed.targetprep.PushFilePreparer">
+        <option name="cleanup" value="true" />
+        <option name="push" value="VtsHalKeymasterV4_0TargetTest->/data/local/tmp/VtsHalKeymasterV4_0TargetTest" />
+    </target_preparer>
+
+    <test class="com.android.tradefed.testtype.GTest" >
+        <option name="native-test-device-path" value="/data/local/tmp" />
+        <option name="module-name" value="VtsHalKeymasterV4_0TargetTest" />
+        <option name="native-test-timeout" value="900000"/>
+    </test>
+</configuration>
diff --git a/keymaster/4.0/vts/functional/HmacKeySharingTest.cpp b/keymaster/4.0/vts/functional/HmacKeySharingTest.cpp
index f159796..c228ef7 100644
--- a/keymaster/4.0/vts/functional/HmacKeySharingTest.cpp
+++ b/keymaster/4.0/vts/functional/HmacKeySharingTest.cpp
@@ -101,7 +101,7 @@
     }
 };
 
-TEST_F(HmacKeySharingTest, GetParameters) {
+TEST_P(HmacKeySharingTest, GetParameters) {
     auto result1 = getHmacSharingParameters(keymaster());
     EXPECT_EQ(ErrorCode::OK, result1.error);
 
@@ -114,7 +114,7 @@
         << "A given keymaster should always return the same nonce until restart.";
 }
 
-TEST_F(HmacKeySharingTest, ComputeSharedHmac) {
+TEST_P(HmacKeySharingTest, ComputeSharedHmac) {
     auto params = getHmacSharingParameters(all_keymasters());
     ASSERT_EQ(all_keymasters().size(), params.size())
         << "One or more keymasters failed to provide parameters.";
@@ -143,8 +143,8 @@
 template <class F>
 class final_action {
    public:
-    explicit final_action(F f) : f_(move(f)) {}
-    ~final_action() { f_(); }
+     explicit final_action(F f) : f_(std::move(f)) {}
+     ~final_action() { f_(); }
 
    private:
     F f_;
@@ -155,7 +155,7 @@
     return final_action<F>(f);
 }
 
-TEST_F(HmacKeySharingTest, ComputeSharedHmacCorruptNonce) {
+TEST_P(HmacKeySharingTest, ComputeSharedHmacCorruptNonce) {
     // Important: The execution of this test gets the keymaster implementations on the device out of
     // sync with respect to the HMAC key.  Granted that VTS tests aren't run on in-use production
     // devices, this still has the potential to cause confusion.  To mitigate that, we always
@@ -194,7 +194,7 @@
     }
 }
 
-TEST_F(HmacKeySharingTest, ComputeSharedHmacCorruptSeed) {
+TEST_P(HmacKeySharingTest, ComputeSharedHmacCorruptSeed) {
     // Important: The execution of this test gets the keymaster implementations on the device out of
     // sync with respect to the HMAC key.  Granted that VTS tests aren't run on in-use production
     // devices, this still has the potential to cause confusion.  To mitigate that, we always
@@ -236,6 +236,11 @@
     }
 }
 
+INSTANTIATE_TEST_SUITE_P(
+        PerInstance, HmacKeySharingTest,
+        testing::ValuesIn(android::hardware::getAllHalInstanceNames(IKeymasterDevice::descriptor)),
+        android::hardware::PrintInstanceNameToString);
+
 }  // namespace test
 }  // namespace V4_0
 }  // namespace keymaster
diff --git a/keymaster/4.0/vts/functional/KeymasterHidlTest.cpp b/keymaster/4.0/vts/functional/KeymasterHidlTest.cpp
index 4838e7e..07409f6 100644
--- a/keymaster/4.0/vts/functional/KeymasterHidlTest.cpp
+++ b/keymaster/4.0/vts/functional/KeymasterHidlTest.cpp
@@ -41,18 +41,9 @@
 
 namespace test {
 
-sp<IKeymasterDevice> KeymasterHidlTest::keymaster_;
-std::vector<sp<IKeymasterDevice>> KeymasterHidlTest::all_keymasters_;
-uint32_t KeymasterHidlTest::os_version_;
-uint32_t KeymasterHidlTest::os_patch_level_;
-SecurityLevel KeymasterHidlTest::securityLevel_;
-hidl_string KeymasterHidlTest::name_;
-hidl_string KeymasterHidlTest::author_;
-string KeymasterHidlTest::service_name_;
-
 void KeymasterHidlTest::InitializeKeymaster() {
-    service_name_ = KeymasterHidlEnvironment::Instance()->getServiceName<IKeymasterDevice>();
-    keymaster_ = ::testing::VtsHalHidlTargetTestBase::getService<IKeymasterDevice>(service_name_);
+    service_name_ = GetParam();
+    keymaster_ = IKeymasterDevice::getService(service_name_);
     ASSERT_NE(keymaster_, nullptr);
 
     ASSERT_TRUE(keymaster_
@@ -65,8 +56,7 @@
                     .isOk());
 }
 
-void KeymasterHidlTest::SetUpTestCase() {
-
+void KeymasterHidlTest::SetUp() {
     InitializeKeymaster();
 
     os_version_ = ::keymaster::GetOsVersion();
@@ -79,8 +69,7 @@
         IKeymasterDevice::descriptor, [&](const hidl_vec<hidl_string>& names) {
             for (auto& name : names) {
                 if (name == service_name_) continue;
-                auto keymaster =
-                    ::testing::VtsHalHidlTargetTestBase::getService<IKeymasterDevice>(name);
+                auto keymaster = IKeymasterDevice::getService(name);
                 ASSERT_NE(keymaster, nullptr);
                 all_keymasters_.push_back(keymaster);
             }
@@ -222,8 +211,8 @@
             std::chrono::time_point<std::chrono::system_clock> reported_time{
                     std::chrono::milliseconds(sw_enforced[i].f.dateTime)};
             // The test is flaky for EC keys, so a buffer time of 120 seconds will be added.
-            EXPECT_LE(creation - 120s, reported_time);
-            EXPECT_LE(reported_time, now + 1s);
+            EXPECT_LE(creation - std::chrono::seconds(120), reported_time);
+            EXPECT_LE(reported_time, now + std::chrono::seconds(1));
         }
     }
 }
diff --git a/keymaster/4.0/vts/functional/KeymasterHidlTest.h b/keymaster/4.0/vts/functional/KeymasterHidlTest.h
index b09da45..adceead 100644
--- a/keymaster/4.0/vts/functional/KeymasterHidlTest.h
+++ b/keymaster/4.0/vts/functional/KeymasterHidlTest.h
@@ -14,14 +14,13 @@
  * limitations under the License.
  */
 
-#ifndef HARDWARE_INTERFACES_KEYMASTER_40_VTS_FUNCTIONAL_KEYMASTER_HIDL_TEST_H_
-#define HARDWARE_INTERFACES_KEYMASTER_40_VTS_FUNCTIONAL_KEYMASTER_HIDL_TEST_H_
+#pragma once
 
 #include <android/hardware/keymaster/4.0/IKeymasterDevice.h>
 #include <android/hardware/keymaster/4.0/types.h>
-
-#include <VtsHalHidlTargetTestBase.h>
-
+#include <gtest/gtest.h>
+#include <hidl/GtestPrinter.h>
+#include <hidl/ServiceManagement.h>
 #include <keymaster/keymaster_configuration.h>
 
 #include <keymasterV4_0/authorization_set.h>
@@ -69,43 +68,24 @@
 
 constexpr uint64_t kOpHandleSentinel = 0xFFFFFFFFFFFFFFFF;
 
-class KeymasterHidlEnvironment : public ::testing::VtsHalHidlTargetTestEnvBase {
-   public:
-    // get the test environment singleton
-    static KeymasterHidlEnvironment* Instance() {
-        static KeymasterHidlEnvironment* instance = new KeymasterHidlEnvironment;
-        return instance;
-    }
-
-    void registerTestServices() override { registerTestService<IKeymasterDevice>(); }
-
-   private:
-    KeymasterHidlEnvironment(){};
-
-    GTEST_DISALLOW_COPY_AND_ASSIGN_(KeymasterHidlEnvironment);
-};
-
-class KeymasterHidlTest : public ::testing::VtsHalHidlTargetTestBase {
-   public:
+class KeymasterHidlTest : public ::testing::TestWithParam<std::string> {
+  public:
+    void SetUp();
     void TearDown() override {
         if (key_blob_.size()) {
             CheckedDeleteKey();
         }
         AbortIfNeeded();
-    }
-
-    // SetUpTestCase runs only once per test case, not once per test.
-    static void SetUpTestCase();
-    static void InitializeKeymaster();
-    static void TearDownTestCase() {
         keymaster_.clear();
         all_keymasters_.clear();
     }
 
-    static IKeymasterDevice& keymaster() { return *keymaster_; }
-    static const std::vector<sp<IKeymasterDevice>>& all_keymasters() { return all_keymasters_; }
-    static uint32_t os_version() { return os_version_; }
-    static uint32_t os_patch_level() { return os_patch_level_; }
+    void InitializeKeymaster();
+
+    IKeymasterDevice& keymaster() { return *keymaster_; }
+    const std::vector<sp<IKeymasterDevice>>& all_keymasters() { return all_keymasters_; }
+    uint32_t os_version() { return os_version_; }
+    uint32_t os_patch_level() { return os_patch_level_; }
 
     ErrorCode GenerateKey(const AuthorizationSet& key_desc, HidlBuf* key_blob,
                           KeyCharacteristics* key_characteristics);
@@ -216,8 +196,8 @@
 
     std::pair<ErrorCode, HidlBuf> UpgradeKey(const HidlBuf& key_blob);
 
-    static bool IsSecure() { return securityLevel_ != SecurityLevel::SOFTWARE; }
-    static SecurityLevel SecLevel() { return securityLevel_; }
+    bool IsSecure() { return securityLevel_ != SecurityLevel::SOFTWARE; }
+    SecurityLevel SecLevel() { return securityLevel_; }
 
     std::vector<uint32_t> ValidKeySizes(Algorithm algorithm);
     std::vector<uint32_t> InvalidKeySizes(Algorithm algorithm);
@@ -233,15 +213,15 @@
     OperationHandle op_handle_ = kOpHandleSentinel;
 
    private:
-    static sp<IKeymasterDevice> keymaster_;
-    static std::vector<sp<IKeymasterDevice>> all_keymasters_;
-    static uint32_t os_version_;
-    static uint32_t os_patch_level_;
+     sp<IKeymasterDevice> keymaster_;
+     std::vector<sp<IKeymasterDevice>> all_keymasters_;
+     uint32_t os_version_;
+     uint32_t os_patch_level_;
 
-    static SecurityLevel securityLevel_;
-    static hidl_string name_;
-    static hidl_string author_;
-    static string service_name_;
+     SecurityLevel securityLevel_;
+     hidl_string name_;
+     hidl_string author_;
+     string service_name_;
 };
 
 }  // namespace test
@@ -249,5 +229,3 @@
 }  // namespace keymaster
 }  // namespace hardware
 }  // namespace android
-
-#endif  // HARDWARE_INTERFACES_KEYMASTER_40_VTS_FUNCTIONAL_KEYMASTER_HIDL_TEST_H_
diff --git a/keymaster/4.0/vts/functional/VerificationTokenTest.cpp b/keymaster/4.0/vts/functional/VerificationTokenTest.cpp
index de28683..693f4ae 100644
--- a/keymaster/4.0/vts/functional/VerificationTokenTest.cpp
+++ b/keymaster/4.0/vts/functional/VerificationTokenTest.cpp
@@ -75,7 +75,7 @@
  * thing we really can test is that tokens can be created by TEE keymasters, and that the
  * timestamps increase as expected.
  */
-TEST_F(VerificationTokenTest, TestCreation) {
+TEST_P(VerificationTokenTest, TestCreation) {
     auto result1 = verifyAuthorization(
         1 /* operation handle */, AuthorizationSet() /* paramtersToVerify */, HardwareAuthToken());
     ASSERT_TRUE(result1.callSuccessful);
@@ -134,7 +134,7 @@
  * stamp is included in the mac but on failure we know that it is not. Other than in the test
  * case above we call verifyAuthorization with the exact same set of parameters.
  */
-TEST_F(VerificationTokenTest, MacChangesOnChangingTimestamp) {
+TEST_P(VerificationTokenTest, MacChangesOnChangingTimestamp) {
     auto result1 =
             verifyAuthorization(0 /* operation handle */,
                                 AuthorizationSet() /* paramtersToVerify */, HardwareAuthToken());
@@ -185,6 +185,11 @@
               memcmp(result1.token.mac.data(), result2.token.mac.data(), result1.token.mac.size()));
 }
 
+INSTANTIATE_TEST_SUITE_P(
+        PerInstance, VerificationTokenTest,
+        testing::ValuesIn(android::hardware::getAllHalInstanceNames(IKeymasterDevice::descriptor)),
+        android::hardware::PrintInstanceNameToString);
+
 }  // namespace test
 }  // namespace V4_0
 }  // namespace keymaster
diff --git a/keymaster/4.0/vts/functional/keymaster_hidl_hal_test.cpp b/keymaster/4.0/vts/functional/keymaster_hidl_hal_test.cpp
index 4409bde..35a2fb1 100644
--- a/keymaster/4.0/vts/functional/keymaster_hidl_hal_test.cpp
+++ b/keymaster/4.0/vts/functional/keymaster_hidl_hal_test.cpp
@@ -522,7 +522,7 @@
  * Verifies that keymaster can generate all required RSA key sizes, and that the resulting keys have
  * correct characteristics.
  */
-TEST_F(NewKeyGenerationTest, Rsa) {
+TEST_P(NewKeyGenerationTest, Rsa) {
     for (auto key_size : ValidKeySizes(Algorithm::RSA)) {
         HidlBuf key_blob;
         KeyCharacteristics key_characteristics;
@@ -557,7 +557,7 @@
  *
  * Verifies that creation date time is correct.
  */
-TEST_F(NewKeyGenerationTest, RsaCheckCreationDateTime) {
+TEST_P(NewKeyGenerationTest, RsaCheckCreationDateTime) {
     KeyCharacteristics key_characteristics;
     auto creation_time = std::chrono::system_clock::now();
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
@@ -575,7 +575,7 @@
  *
  * Verifies that keymaster cannot generate any RSA key sizes that are designated as invalid.
  */
-TEST_F(NewKeyGenerationTest, NoInvalidRsaSizes) {
+TEST_P(NewKeyGenerationTest, NoInvalidRsaSizes) {
     for (auto key_size : InvalidKeySizes(Algorithm::RSA)) {
         HidlBuf key_blob;
         KeyCharacteristics key_characteristics;
@@ -593,7 +593,7 @@
  *
  * Verifies that failing to specify a key size for RSA key generation returns UNSUPPORTED_KEY_SIZE.
  */
-TEST_F(NewKeyGenerationTest, RsaNoDefaultSize) {
+TEST_P(NewKeyGenerationTest, RsaNoDefaultSize) {
     ASSERT_EQ(ErrorCode::UNSUPPORTED_KEY_SIZE,
               GenerateKey(AuthorizationSetBuilder()
                               .Authorization(TAG_ALGORITHM, Algorithm::RSA)
@@ -607,7 +607,7 @@
  * Verifies that keymaster can generate all required EC key sizes, and that the resulting keys have
  * correct characteristics.
  */
-TEST_F(NewKeyGenerationTest, Ecdsa) {
+TEST_P(NewKeyGenerationTest, Ecdsa) {
     for (auto key_size : ValidKeySizes(Algorithm::EC)) {
         HidlBuf key_blob;
         KeyCharacteristics key_characteristics;
@@ -639,7 +639,7 @@
  *
  * Verifies that creation date time is correct.
  */
-TEST_F(NewKeyGenerationTest, EcCheckCreationDateTime) {
+TEST_P(NewKeyGenerationTest, EcCheckCreationDateTime) {
     KeyCharacteristics key_characteristics;
     auto creation_time = std::chrono::system_clock::now();
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
@@ -656,7 +656,7 @@
  *
  * Verifies that failing to specify a key size for EC key generation returns UNSUPPORTED_KEY_SIZE.
  */
-TEST_F(NewKeyGenerationTest, EcdsaDefaultSize) {
+TEST_P(NewKeyGenerationTest, EcdsaDefaultSize) {
     ASSERT_EQ(ErrorCode::UNSUPPORTED_KEY_SIZE,
               GenerateKey(AuthorizationSetBuilder()
                               .Authorization(TAG_ALGORITHM, Algorithm::EC)
@@ -669,7 +669,7 @@
  *
  * Verifies that specifying an invalid key size for EC key generation returns UNSUPPORTED_KEY_SIZE.
  */
-TEST_F(NewKeyGenerationTest, EcdsaInvalidSize) {
+TEST_P(NewKeyGenerationTest, EcdsaInvalidSize) {
     for (auto key_size : InvalidKeySizes(Algorithm::EC)) {
         HidlBuf key_blob;
         KeyCharacteristics key_characteristics;
@@ -689,7 +689,7 @@
  * Verifies that specifying mismatched key size and curve for EC key generation returns
  * INVALID_ARGUMENT.
  */
-TEST_F(NewKeyGenerationTest, EcdsaMismatchKeySize) {
+TEST_P(NewKeyGenerationTest, EcdsaMismatchKeySize) {
     if (SecLevel() == SecurityLevel::STRONGBOX) return;
 
     ASSERT_EQ(ErrorCode::INVALID_ARGUMENT,
@@ -704,7 +704,7 @@
  *
  * Verifies that keymaster supports all required EC key sizes.
  */
-TEST_F(NewKeyGenerationTest, EcdsaAllValidSizes) {
+TEST_P(NewKeyGenerationTest, EcdsaAllValidSizes) {
     auto valid_sizes = ValidKeySizes(Algorithm::EC);
     for (size_t size : valid_sizes) {
         EXPECT_EQ(ErrorCode::OK,
@@ -720,7 +720,7 @@
  *
  * Verifies that keymaster does not support any curve designated as unsupported.
  */
-TEST_F(NewKeyGenerationTest, EcdsaAllValidCurves) {
+TEST_P(NewKeyGenerationTest, EcdsaAllValidCurves) {
     Digest digest;
     if (SecLevel() == SecurityLevel::STRONGBOX) {
         digest = Digest::SHA_2_256;
@@ -743,7 +743,7 @@
  * Verifies that keymaster supports all required digests, and that the resulting keys have correct
  * characteristics.
  */
-TEST_F(NewKeyGenerationTest, Hmac) {
+TEST_P(NewKeyGenerationTest, Hmac) {
     for (auto digest : ValidDigests(false /* withNone */, true /* withMD5 */)) {
         HidlBuf key_blob;
         KeyCharacteristics key_characteristics;
@@ -779,7 +779,7 @@
  *
  * Verifies that keymaster supports all key sizes, and rejects all invalid key sizes.
  */
-TEST_F(NewKeyGenerationTest, HmacCheckKeySizes) {
+TEST_P(NewKeyGenerationTest, HmacCheckKeySizes) {
     for (size_t key_size = 0; key_size <= 512; ++key_size) {
         if (key_size < 64 || key_size % 8 != 0) {
             // To keep this test from being very slow, we only test a random fraction of non-byte
@@ -812,7 +812,7 @@
  * test is probabilistic in order to keep the runtime down, but any failure prints out the specific
  * MAC length that failed, so reproducing a failed run will be easy.
  */
-TEST_F(NewKeyGenerationTest, HmacCheckMinMacLengths) {
+TEST_P(NewKeyGenerationTest, HmacCheckMinMacLengths) {
     for (size_t min_mac_length = 0; min_mac_length <= 256; ++min_mac_length) {
         if (min_mac_length < 64 || min_mac_length % 8 != 0) {
             // To keep this test from being very long, we only test a random fraction of non-byte
@@ -844,7 +844,7 @@
  *
  * Verifies that keymaster rejects HMAC key generation with multiple specified digest algorithms.
  */
-TEST_F(NewKeyGenerationTest, HmacMultipleDigests) {
+TEST_P(NewKeyGenerationTest, HmacMultipleDigests) {
     if (SecLevel() == SecurityLevel::STRONGBOX) return;
 
     ASSERT_EQ(ErrorCode::UNSUPPORTED_DIGEST,
@@ -860,7 +860,7 @@
  *
  * Verifies that keymaster rejects HMAC key generation with no digest or Digest::NONE
  */
-TEST_F(NewKeyGenerationTest, HmacDigestNone) {
+TEST_P(NewKeyGenerationTest, HmacDigestNone) {
     ASSERT_EQ(
         ErrorCode::UNSUPPORTED_DIGEST,
         GenerateKey(AuthorizationSetBuilder().HmacKey(128).Authorization(TAG_MIN_MAC_LENGTH, 128)));
@@ -879,7 +879,7 @@
  *
  * Verifies that raw RSA signature operations succeed.
  */
-TEST_F(SigningOperationsTest, RsaSuccess) {
+TEST_P(SigningOperationsTest, RsaSuccess) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .RsaSigningKey(2048, 65537)
                                              .Digest(Digest::NONE)
@@ -895,7 +895,7 @@
  *
  * Verifies that getting RSA key characteristics requires the correct app ID/data.
  */
-TEST_F(SigningOperationsTest, RsaGetKeyCharacteristicsRequiresCorrectAppIdAppData) {
+TEST_P(SigningOperationsTest, RsaGetKeyCharacteristicsRequiresCorrectAppIdAppData) {
     HidlBuf key_blob;
     KeyCharacteristics key_characteristics;
     ASSERT_EQ(ErrorCode::OK,
@@ -916,7 +916,7 @@
  *
  * Verifies that using an RSA key requires the correct app ID/data.
  */
-TEST_F(SigningOperationsTest, RsaUseRequiresCorrectAppIdAppData) {
+TEST_P(SigningOperationsTest, RsaUseRequiresCorrectAppIdAppData) {
     ASSERT_EQ(ErrorCode::OK,
               GenerateKey(AuthorizationSetBuilder()
                                   .Authorization(TAG_NO_AUTH_REQUIRED)
@@ -958,7 +958,7 @@
  *
  * Verifies that RSA-PSS signature operations succeed.
  */
-TEST_F(SigningOperationsTest, RsaPssSha256Success) {
+TEST_P(SigningOperationsTest, RsaPssSha256Success) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .RsaSigningKey(2048, 65537)
                                              .Digest(Digest::SHA_2_256)
@@ -976,7 +976,7 @@
  * Verifies that keymaster rejects signature operations that specify a padding mode when the key
  * supports only unpadded operations.
  */
-TEST_F(SigningOperationsTest, RsaPaddingNoneDoesNotAllowOther) {
+TEST_P(SigningOperationsTest, RsaPaddingNoneDoesNotAllowOther) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .RsaSigningKey(2048, 65537)
                                              .Digest(Digest::NONE)
@@ -998,7 +998,7 @@
  * TRUSTED_CONFIRMATION_REQUIRED and no valid confirmation token
  * presented.
  */
-TEST_F(SigningOperationsTest, NoUserConfirmation) {
+TEST_P(SigningOperationsTest, NoUserConfirmation) {
     if (SecLevel() == SecurityLevel::STRONGBOX) return;
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .RsaSigningKey(1024, 65537)
@@ -1020,7 +1020,7 @@
  *
  * Verifies that digested RSA-PKCS1 signature operations succeed.
  */
-TEST_F(SigningOperationsTest, RsaPkcs1Sha256Success) {
+TEST_P(SigningOperationsTest, RsaPkcs1Sha256Success) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .RsaSigningKey(2048, 65537)
                                              .Digest(Digest::SHA_2_256)
@@ -1037,7 +1037,7 @@
  *
  * Verifies that undigested RSA-PKCS1 signature operations succeed.
  */
-TEST_F(SigningOperationsTest, RsaPkcs1NoDigestSuccess) {
+TEST_P(SigningOperationsTest, RsaPkcs1NoDigestSuccess) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .RsaSigningKey(2048, 65537)
                                              .Digest(Digest::NONE)
@@ -1055,7 +1055,7 @@
  * Verifies that undigested RSA-PKCS1 signature operations fail with the correct error code when
  * given a too-long message.
  */
-TEST_F(SigningOperationsTest, RsaPkcs1NoDigestTooLong) {
+TEST_P(SigningOperationsTest, RsaPkcs1NoDigestTooLong) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .RsaSigningKey(2048, 65537)
                                              .Digest(Digest::NONE)
@@ -1083,7 +1083,7 @@
  * uses SHA512, which has a digest_size == 512, so the message size is 1040 bits, too large for a
  * 1024-bit key.
  */
-TEST_F(SigningOperationsTest, RsaPssSha512TooSmallKey) {
+TEST_P(SigningOperationsTest, RsaPssSha512TooSmallKey) {
     if (SecLevel() == SecurityLevel::STRONGBOX) return;
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .RsaSigningKey(1024, 65537)
@@ -1102,7 +1102,7 @@
  * Verifies that raw RSA signature operations fail with the correct error code when
  * given a too-long message.
  */
-TEST_F(SigningOperationsTest, RsaNoPaddingTooLong) {
+TEST_P(SigningOperationsTest, RsaNoPaddingTooLong) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .RsaSigningKey(2048, 65537)
                                              .Digest(Digest::NONE)
@@ -1136,7 +1136,7 @@
  * Verifies that operations can be aborted correctly.  Uses an RSA signing operation for the test,
  * but the behavior should be algorithm and purpose-independent.
  */
-TEST_F(SigningOperationsTest, RsaAbort) {
+TEST_P(SigningOperationsTest, RsaAbort) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .RsaSigningKey(2048, 65537)
                                              .Digest(Digest::NONE)
@@ -1161,7 +1161,7 @@
  * Verifies that RSA operations fail with the correct error (but key gen succeeds) when used with a
  * padding mode inappropriate for RSA.
  */
-TEST_F(SigningOperationsTest, RsaUnsupportedPadding) {
+TEST_P(SigningOperationsTest, RsaUnsupportedPadding) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .RsaSigningKey(2048, 65537)
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
@@ -1178,7 +1178,7 @@
  *
  * Verifies that RSA PSS operations fail when no digest is used.  PSS requires a digest.
  */
-TEST_F(SigningOperationsTest, RsaNoDigest) {
+TEST_P(SigningOperationsTest, RsaNoDigest) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .RsaSigningKey(2048, 65537)
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
@@ -1198,7 +1198,7 @@
  * Verifies that RSA operations fail when no padding mode is specified.  PaddingMode::NONE is
  * supported in some cases (as validated in other tests), but a mode must be specified.
  */
-TEST_F(SigningOperationsTest, RsaNoPadding) {
+TEST_P(SigningOperationsTest, RsaNoPadding) {
     // Padding must be specified
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .RsaKey(2048, 65537)
@@ -1214,7 +1214,7 @@
  *
  * Verifies that raw RSA signatures succeed with a message shorter than the key size.
  */
-TEST_F(SigningOperationsTest, RsaTooShortMessage) {
+TEST_P(SigningOperationsTest, RsaTooShortMessage) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .RsaSigningKey(2048, 65537)
@@ -1235,7 +1235,7 @@
  *
  * Verifies that RSA encryption keys cannot be used to sign.
  */
-TEST_F(SigningOperationsTest, RsaSignWithEncryptionKey) {
+TEST_P(SigningOperationsTest, RsaSignWithEncryptionKey) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .RsaEncryptionKey(2048, 65537)
@@ -1252,7 +1252,7 @@
  * Verifies that attempting a raw signature of a message which is the same length as the key, but
  * numerically larger than the public modulus, fails with the correct error.
  */
-TEST_F(SigningOperationsTest, RsaSignTooLargeMessage) {
+TEST_P(SigningOperationsTest, RsaSignTooLargeMessage) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .RsaSigningKey(2048, 65537)
@@ -1274,7 +1274,7 @@
  *
  * Verifies that ECDSA operations succeed with all possible key sizes and hashes.
  */
-TEST_F(SigningOperationsTest, EcdsaAllSizesAndHashes) {
+TEST_P(SigningOperationsTest, EcdsaAllSizesAndHashes) {
     for (auto key_size : ValidKeySizes(Algorithm::EC)) {
         for (auto digest : ValidDigests(false /* withNone */, false /* withMD5 */)) {
             ErrorCode error = GenerateKey(AuthorizationSetBuilder()
@@ -1298,7 +1298,7 @@
  *
  * Verifies that ECDSA operations succeed with all possible curves.
  */
-TEST_F(SigningOperationsTest, EcdsaAllCurves) {
+TEST_P(SigningOperationsTest, EcdsaAllCurves) {
     for (auto curve : ValidCurves()) {
         ErrorCode error = GenerateKey(AuthorizationSetBuilder()
                                           .Authorization(TAG_NO_AUTH_REQUIRED)
@@ -1320,7 +1320,7 @@
  * work because ECDSA actually only signs the leftmost L_n bits of the message, however large it may
  * be.  Not using digesting is a bad idea, but in some cases digesting is done by the framework.
  */
-TEST_F(SigningOperationsTest, EcdsaNoDigestHugeData) {
+TEST_P(SigningOperationsTest, EcdsaNoDigestHugeData) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .EcdsaSigningKey(256)
@@ -1334,7 +1334,7 @@
  *
  * Verifies that getting EC key characteristics requires the correct app ID/data.
  */
-TEST_F(SigningOperationsTest, EcGetKeyCharacteristicsRequiresCorrectAppIdAppData) {
+TEST_P(SigningOperationsTest, EcGetKeyCharacteristicsRequiresCorrectAppIdAppData) {
     HidlBuf key_blob;
     KeyCharacteristics key_characteristics;
     ASSERT_EQ(ErrorCode::OK,
@@ -1354,7 +1354,7 @@
  *
  * Verifies that using an EC key requires the correct app ID/data.
  */
-TEST_F(SigningOperationsTest, EcUseRequiresCorrectAppIdAppData) {
+TEST_P(SigningOperationsTest, EcUseRequiresCorrectAppIdAppData) {
     ASSERT_EQ(ErrorCode::OK,
               GenerateKey(AuthorizationSetBuilder()
                                   .Authorization(TAG_NO_AUTH_REQUIRED)
@@ -1391,7 +1391,7 @@
  *
  * Verifies that attempts to use AES keys to sign fail in the correct way.
  */
-TEST_F(SigningOperationsTest, AesEcbSign) {
+TEST_P(SigningOperationsTest, AesEcbSign) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .SigningKey()
@@ -1410,7 +1410,7 @@
  *
  * Verifies that HMAC works with all digests.
  */
-TEST_F(SigningOperationsTest, HmacAllDigests) {
+TEST_P(SigningOperationsTest, HmacAllDigests) {
     for (auto digest : ValidDigests(false /* withNone */, false /* withMD5 */)) {
         ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                                  .Authorization(TAG_NO_AUTH_REQUIRED)
@@ -1432,7 +1432,7 @@
  * Verifies that HMAC fails in the correct way when asked to generate a MAC larger than the digest
  * size.
  */
-TEST_F(SigningOperationsTest, HmacSha256TooLargeMacLength) {
+TEST_P(SigningOperationsTest, HmacSha256TooLargeMacLength) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .HmacKey(128)
@@ -1453,7 +1453,7 @@
  * Verifies that HMAC fails in the correct way when asked to generate a MAC smaller than the
  * specified minimum MAC length.
  */
-TEST_F(SigningOperationsTest, HmacSha256TooSmallMacLength) {
+TEST_P(SigningOperationsTest, HmacSha256TooSmallMacLength) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .HmacKey(128)
@@ -1473,7 +1473,7 @@
  *
  * Validates against the test vectors from RFC 4231 test case 3.
  */
-TEST_F(SigningOperationsTest, HmacRfc4231TestCase3) {
+TEST_P(SigningOperationsTest, HmacRfc4231TestCase3) {
     string key(20, 0xaa);
     string message(50, 0xdd);
     uint8_t sha_224_expected[] = {
@@ -1512,7 +1512,7 @@
  *
  * Validates against the test vectors from RFC 4231 test case 5.
  */
-TEST_F(SigningOperationsTest, HmacRfc4231TestCase5) {
+TEST_P(SigningOperationsTest, HmacRfc4231TestCase5) {
     string key(20, 0x0c);
     string message = "Test With Truncation";
 
@@ -1548,7 +1548,7 @@
  *
  * Verifies that a simple RSA signature/verification sequence succeeds.
  */
-TEST_F(VerificationOperationsTest, RsaSuccess) {
+TEST_P(VerificationOperationsTest, RsaSuccess) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .RsaSigningKey(2048, 65537)
@@ -1566,7 +1566,7 @@
  *
  * Verifies RSA signature/verification for all padding modes and digests.
  */
-TEST_F(VerificationOperationsTest, RsaAllPaddingsAndDigests) {
+TEST_P(VerificationOperationsTest, RsaAllPaddingsAndDigests) {
     auto authorizations = AuthorizationSetBuilder()
                               .Authorization(TAG_NO_AUTH_REQUIRED)
                               .RsaSigningKey(2048, 65537)
@@ -1660,7 +1660,7 @@
  *
  * Verifies ECDSA signature/verification for all digests and curves.
  */
-TEST_F(VerificationOperationsTest, EcdsaAllDigestsAndCurves) {
+TEST_P(VerificationOperationsTest, EcdsaAllDigestsAndCurves) {
     auto digests = ValidDigests(true /* withNone */, false /* withMD5 */);
 
     string message = "1234567890";
@@ -1740,7 +1740,7 @@
  *
  * Verifies HMAC signing and verification, but that a signing key cannot be used to verify.
  */
-TEST_F(VerificationOperationsTest, HmacSigningKeyCannotVerify) {
+TEST_P(VerificationOperationsTest, HmacSigningKeyCannotVerify) {
     string key_material = "HelloThisIsAKey";
 
     HidlBuf signing_key, verification_key;
@@ -1788,7 +1788,7 @@
  *
  * Verifies that attempting to export RSA keys in PKCS#8 format fails with the correct error.
  */
-TEST_F(ExportKeyTest, RsaUnsupportedKeyFormat) {
+TEST_P(ExportKeyTest, RsaUnsupportedKeyFormat) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .RsaSigningKey(2048, 65537)
                                              .Digest(Digest::NONE)
@@ -1803,7 +1803,7 @@
  * Verifies that attempting to export RSA keys from corrupted key blobs fails.  This is essentially
  * a poor-man's key blob fuzzer.
  */
-TEST_F(ExportKeyTest, RsaCorruptedKeyBlob) {
+TEST_P(ExportKeyTest, RsaCorruptedKeyBlob) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .RsaSigningKey(2048, 65537)
@@ -1826,7 +1826,7 @@
  * Verifies that attempting to export ECDSA keys from corrupted key blobs fails.  This is
  * essentially a poor-man's key blob fuzzer.
  */
-TEST_F(ExportKeyTest, EcCorruptedKeyBlob) {
+TEST_P(ExportKeyTest, EcCorruptedKeyBlob) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .EcdsaSigningKey(EcCurve::P_256)
@@ -1847,7 +1847,7 @@
  *
  * Verifies that attempting to export AES keys fails in the expected way.
  */
-TEST_F(ExportKeyTest, AesKeyUnexportable) {
+TEST_P(ExportKeyTest, AesKeyUnexportable) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .AesEncryptionKey(128)
@@ -1895,7 +1895,7 @@
  *
  * Verifies that importing and using an RSA key pair works correctly.
  */
-TEST_F(ImportKeyTest, RsaSuccess) {
+TEST_P(ImportKeyTest, RsaSuccess) {
     ASSERT_EQ(ErrorCode::OK, ImportKey(AuthorizationSetBuilder()
                                            .Authorization(TAG_NO_AUTH_REQUIRED)
                                            .RsaSigningKey(1024, 65537)
@@ -1922,7 +1922,7 @@
  * Verifies that importing an RSA key pair with a size that doesn't match the key fails in the
  * correct way.
  */
-TEST_F(ImportKeyTest, RsaKeySizeMismatch) {
+TEST_P(ImportKeyTest, RsaKeySizeMismatch) {
     ASSERT_EQ(ErrorCode::IMPORT_PARAMETER_MISMATCH,
               ImportKey(AuthorizationSetBuilder()
                             .RsaSigningKey(2048 /* Doesn't match key */, 65537)
@@ -1937,7 +1937,7 @@
  * Verifies that importing an RSA key pair with a public exponent that doesn't match the key fails
  * in the correct way.
  */
-TEST_F(ImportKeyTest, RsaPublicExponentMismatch) {
+TEST_P(ImportKeyTest, RsaPublicExponentMismatch) {
     ASSERT_EQ(ErrorCode::IMPORT_PARAMETER_MISMATCH,
               ImportKey(AuthorizationSetBuilder()
                             .RsaSigningKey(1024, 3 /* Doesn't match key */)
@@ -1951,7 +1951,7 @@
  *
  * Verifies that importing and using an ECDSA P-256 key pair works correctly.
  */
-TEST_F(ImportKeyTest, EcdsaSuccess) {
+TEST_P(ImportKeyTest, EcdsaSuccess) {
     ASSERT_EQ(ErrorCode::OK, ImportKey(AuthorizationSetBuilder()
                                            .Authorization(TAG_NO_AUTH_REQUIRED)
                                            .EcdsaSigningKey(256)
@@ -1976,7 +1976,7 @@
  *
  * Verifies that importing and using an ECDSA P-256 key pair encoded using RFC5915 works correctly.
  */
-TEST_F(ImportKeyTest, EcdsaP256RFC5915Success) {
+TEST_P(ImportKeyTest, EcdsaP256RFC5915Success) {
     ASSERT_EQ(ErrorCode::OK, ImportKey(AuthorizationSetBuilder()
                                                .Authorization(TAG_NO_AUTH_REQUIRED)
                                                .EcdsaSigningKey(256)
@@ -2001,7 +2001,7 @@
  *
  * Verifies that importing and using an ECDSA P-256 key pair encoded using SEC1 works correctly.
  */
-TEST_F(ImportKeyTest, EcdsaP256SEC1Success) {
+TEST_P(ImportKeyTest, EcdsaP256SEC1Success) {
     ASSERT_EQ(ErrorCode::OK, ImportKey(AuthorizationSetBuilder()
                                                .Authorization(TAG_NO_AUTH_REQUIRED)
                                                .EcdsaSigningKey(256)
@@ -2026,7 +2026,7 @@
  *
  * Verifies that importing and using an ECDSA P-521 key pair works correctly.
  */
-TEST_F(ImportKeyTest, Ecdsa521Success) {
+TEST_P(ImportKeyTest, Ecdsa521Success) {
     if (SecLevel() == SecurityLevel::STRONGBOX) return;
     ASSERT_EQ(ErrorCode::OK, ImportKey(AuthorizationSetBuilder()
                                            .Authorization(TAG_NO_AUTH_REQUIRED)
@@ -2052,7 +2052,7 @@
  * Verifies that importing an ECDSA key pair with a size that doesn't match the key fails in the
  * correct way.
  */
-TEST_F(ImportKeyTest, EcdsaSizeMismatch) {
+TEST_P(ImportKeyTest, EcdsaSizeMismatch) {
     ASSERT_EQ(ErrorCode::IMPORT_PARAMETER_MISMATCH,
               ImportKey(AuthorizationSetBuilder()
                             .EcdsaSigningKey(224 /* Doesn't match key */)
@@ -2066,7 +2066,7 @@
  * Verifies that importing an ECDSA key pair with a curve that doesn't match the key fails in the
  * correct way.
  */
-TEST_F(ImportKeyTest, EcdsaCurveMismatch) {
+TEST_P(ImportKeyTest, EcdsaCurveMismatch) {
     ASSERT_EQ(ErrorCode::IMPORT_PARAMETER_MISMATCH,
               ImportKey(AuthorizationSetBuilder()
                             .EcdsaSigningKey(EcCurve::P_224 /* Doesn't match key */)
@@ -2079,7 +2079,7 @@
  *
  * Verifies that importing and using an AES key works.
  */
-TEST_F(ImportKeyTest, AesSuccess) {
+TEST_P(ImportKeyTest, AesSuccess) {
     string key = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
     ASSERT_EQ(ErrorCode::OK, ImportKey(AuthorizationSetBuilder()
                                            .Authorization(TAG_NO_AUTH_REQUIRED)
@@ -2106,7 +2106,7 @@
  *
  * Verifies that importing and using an HMAC key works.
  */
-TEST_F(ImportKeyTest, HmacKeySuccess) {
+TEST_P(ImportKeyTest, HmacKeySuccess) {
     string key = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
     ASSERT_EQ(ErrorCode::OK, ImportKey(AuthorizationSetBuilder()
                                            .Authorization(TAG_NO_AUTH_REQUIRED)
@@ -2181,7 +2181,7 @@
 
 class ImportWrappedKeyTest : public KeymasterHidlTest {};
 
-TEST_F(ImportWrappedKeyTest, Success) {
+TEST_P(ImportWrappedKeyTest, Success) {
     auto wrapping_key_desc = AuthorizationSetBuilder()
                                  .RsaEncryptionKey(2048, 65537)
                                  .Digest(Digest::SHA_2_256)
@@ -2202,7 +2202,7 @@
     EXPECT_EQ(message, plaintext);
 }
 
-TEST_F(ImportWrappedKeyTest, SuccessMasked) {
+TEST_P(ImportWrappedKeyTest, SuccessMasked) {
     auto wrapping_key_desc = AuthorizationSetBuilder()
                                  .RsaEncryptionKey(2048, 65537)
                                  .Digest(Digest::SHA_2_256)
@@ -2217,7 +2217,7 @@
                       .Padding(PaddingMode::RSA_OAEP)));
 }
 
-TEST_F(ImportWrappedKeyTest, WrongMask) {
+TEST_P(ImportWrappedKeyTest, WrongMask) {
     auto wrapping_key_desc = AuthorizationSetBuilder()
                                  .RsaEncryptionKey(2048, 65537)
                                  .Digest(Digest::SHA_2_256)
@@ -2232,7 +2232,7 @@
                       .Padding(PaddingMode::RSA_OAEP)));
 }
 
-TEST_F(ImportWrappedKeyTest, WrongPurpose) {
+TEST_P(ImportWrappedKeyTest, WrongPurpose) {
     auto wrapping_key_desc = AuthorizationSetBuilder()
                                  .RsaEncryptionKey(2048, 65537)
                                  .Digest(Digest::SHA_2_256)
@@ -2253,7 +2253,7 @@
  *
  * Verifies that raw RSA encryption works.
  */
-TEST_F(EncryptionOperationsTest, RsaNoPaddingSuccess) {
+TEST_P(EncryptionOperationsTest, RsaNoPaddingSuccess) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .RsaEncryptionKey(2048, 65537)
@@ -2276,7 +2276,7 @@
  *
  * Verifies that raw RSA encryption of short messages works.
  */
-TEST_F(EncryptionOperationsTest, RsaNoPaddingShortMessage) {
+TEST_P(EncryptionOperationsTest, RsaNoPaddingShortMessage) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .RsaEncryptionKey(2048, 65537)
@@ -2305,7 +2305,7 @@
  *
  * Verifies that raw RSA encryption of too-long messages fails in the expected way.
  */
-TEST_F(EncryptionOperationsTest, RsaNoPaddingTooLong) {
+TEST_P(EncryptionOperationsTest, RsaNoPaddingTooLong) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .RsaEncryptionKey(2048, 65537)
@@ -2325,7 +2325,7 @@
  *
  * Verifies that raw RSA encryption of too-large (numerically) messages fails in the expected way.
  */
-TEST_F(EncryptionOperationsTest, RsaNoPaddingTooLarge) {
+TEST_P(EncryptionOperationsTest, RsaNoPaddingTooLarge) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .RsaEncryptionKey(2048, 65537)
@@ -2367,7 +2367,7 @@
  *
  * Verifies that RSA-OAEP encryption operations work, with all digests.
  */
-TEST_F(EncryptionOperationsTest, RsaOaepSuccess) {
+TEST_P(EncryptionOperationsTest, RsaOaepSuccess) {
     auto digests = ValidDigests(false /* withNone */, true /* withMD5 */);
 
     size_t key_size = 2048;  // Need largish key for SHA-512 test.
@@ -2418,7 +2418,7 @@
  * Verifies that RSA-OAEP encryption operations fail in the correct way when asked to operate
  * without a digest.
  */
-TEST_F(EncryptionOperationsTest, RsaOaepInvalidDigest) {
+TEST_P(EncryptionOperationsTest, RsaOaepInvalidDigest) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .RsaEncryptionKey(2048, 65537)
@@ -2436,7 +2436,7 @@
  * Verifies that RSA-OAEP encryption operations fail in the correct way when asked to decrypt with a
  * different digest than was used to encrypt.
  */
-TEST_F(EncryptionOperationsTest, RsaOaepDecryptWithWrongDigest) {
+TEST_P(EncryptionOperationsTest, RsaOaepDecryptWithWrongDigest) {
     if (SecLevel() == SecurityLevel::STRONGBOX) return;
 
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
@@ -2464,7 +2464,7 @@
  * Verifies that RSA-OAEP encryption operations fail in the correct way when asked to encrypt a
  * too-large message.
  */
-TEST_F(EncryptionOperationsTest, RsaOaepTooLarge) {
+TEST_P(EncryptionOperationsTest, RsaOaepTooLarge) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .RsaEncryptionKey(2048, 65537)
@@ -2487,7 +2487,7 @@
  *
  * Verifies that RSA PKCS encryption/decrypts works.
  */
-TEST_F(EncryptionOperationsTest, RsaPkcs1Success) {
+TEST_P(EncryptionOperationsTest, RsaPkcs1Success) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .RsaEncryptionKey(2048, 65537)
@@ -2526,7 +2526,7 @@
  *
  * Verifies that RSA PKCS encryption fails in the correct way when the mssage is too large.
  */
-TEST_F(EncryptionOperationsTest, RsaPkcs1TooLarge) {
+TEST_P(EncryptionOperationsTest, RsaPkcs1TooLarge) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .RsaEncryptionKey(2048, 65537)
@@ -2546,7 +2546,7 @@
  *
  * Verifies that attempting to use ECDSA keys to encrypt fails in the correct way.
  */
-TEST_F(EncryptionOperationsTest, EcdsaEncrypt) {
+TEST_P(EncryptionOperationsTest, EcdsaEncrypt) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .EcdsaSigningKey(256)
@@ -2561,7 +2561,7 @@
  *
  * Verifies that attempting to use HMAC keys to encrypt fails in the correct way.
  */
-TEST_F(EncryptionOperationsTest, HmacEncrypt) {
+TEST_P(EncryptionOperationsTest, HmacEncrypt) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .HmacKey(128)
@@ -2581,7 +2581,7 @@
  *
  * Verifies that AES ECB mode works.
  */
-TEST_F(EncryptionOperationsTest, AesEcbRoundTripSuccess) {
+TEST_P(EncryptionOperationsTest, AesEcbRoundTripSuccess) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .AesEncryptionKey(128)
@@ -2610,7 +2610,7 @@
  *
  * Verifies that AES encryption fails in the correct way when an unauthorized mode is specified.
  */
-TEST_F(EncryptionOperationsTest, AesWrongMode) {
+TEST_P(EncryptionOperationsTest, AesWrongMode) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .AesEncryptionKey(128)
@@ -2629,7 +2629,7 @@
  *
  * Verifies that AES encryption fails in the correct way when an unauthorized purpose is specified.
  */
-TEST_F(EncryptionOperationsTest, AesWrongPurpose) {
+TEST_P(EncryptionOperationsTest, AesWrongPurpose) {
     auto err = GenerateKey(AuthorizationSetBuilder()
                                    .Authorization(TAG_NO_AUTH_REQUIRED)
                                    .AesKey(128)
@@ -2664,7 +2664,7 @@
  * Verifies that AES encryption fails in the correct way when provided an input that is not a
  * multiple of the block size and no padding is specified.
  */
-TEST_F(EncryptionOperationsTest, AesEcbNoPaddingWrongInputSize) {
+TEST_P(EncryptionOperationsTest, AesEcbNoPaddingWrongInputSize) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .AesEncryptionKey(128)
@@ -2685,7 +2685,7 @@
  *
  * Verifies that AES PKCS7 padding works for any message length.
  */
-TEST_F(EncryptionOperationsTest, AesEcbPkcs7Padding) {
+TEST_P(EncryptionOperationsTest, AesEcbPkcs7Padding) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .AesEncryptionKey(128)
@@ -2710,7 +2710,7 @@
  * Verifies that AES enryption fails in the correct way when an unauthorized padding mode is
  * specified.
  */
-TEST_F(EncryptionOperationsTest, AesEcbWrongPadding) {
+TEST_P(EncryptionOperationsTest, AesEcbWrongPadding) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .AesEncryptionKey(128)
@@ -2731,7 +2731,7 @@
  *
  * Verifies that AES decryption fails in the correct way when the padding is corrupted.
  */
-TEST_F(EncryptionOperationsTest, AesEcbPkcs7PaddingCorrupted) {
+TEST_P(EncryptionOperationsTest, AesEcbPkcs7PaddingCorrupted) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .AesEncryptionKey(128)
@@ -2762,7 +2762,7 @@
  *
  * Verifies that AES CTR mode works.
  */
-TEST_F(EncryptionOperationsTest, AesCtrRoundTripSuccess) {
+TEST_P(EncryptionOperationsTest, AesCtrRoundTripSuccess) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .AesEncryptionKey(128)
@@ -2809,7 +2809,7 @@
  *
  * Verifies that AES works, all modes, when provided data in various size increments.
  */
-TEST_F(EncryptionOperationsTest, AesIncremental) {
+TEST_P(EncryptionOperationsTest, AesIncremental) {
     auto block_modes = {
         BlockMode::ECB, BlockMode::CBC, BlockMode::CTR, BlockMode::GCM,
     };
@@ -2948,7 +2948,7 @@
  *
  * Verifies AES CTR implementation against SP800-38A test vectors.
  */
-TEST_F(EncryptionOperationsTest, AesCtrSp80038aTestVector) {
+TEST_P(EncryptionOperationsTest, AesCtrSp80038aTestVector) {
     std::vector<uint32_t> InvalidSizes = InvalidKeySizes(Algorithm::AES);
     for (size_t i = 0; i < 3; i++) {
         const AesCtrSp80038aTestVector& test(kAesCtrSp80038aTestVectors[i]);
@@ -2968,7 +2968,7 @@
  *
  * Verifies that keymaster rejects use of CTR mode with PKCS7 padding in the correct way.
  */
-TEST_F(EncryptionOperationsTest, AesCtrIncompatiblePaddingMode) {
+TEST_P(EncryptionOperationsTest, AesCtrIncompatiblePaddingMode) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .AesEncryptionKey(128)
@@ -2983,7 +2983,7 @@
  *
  * Verifies that keymaster fails correctly when the user supplies an incorrect-size nonce.
  */
-TEST_F(EncryptionOperationsTest, AesCtrInvalidCallerNonce) {
+TEST_P(EncryptionOperationsTest, AesCtrInvalidCallerNonce) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .AesEncryptionKey(128)
@@ -3015,7 +3015,7 @@
  *
  * Verifies that keymaster fails correctly when the user supplies an incorrect-size nonce.
  */
-TEST_F(EncryptionOperationsTest, AesCbcRoundTripSuccess) {
+TEST_P(EncryptionOperationsTest, AesCbcRoundTripSuccess) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .AesEncryptionKey(128)
@@ -3048,7 +3048,7 @@
  *
  * Verifies that AES caller-provided nonces work correctly.
  */
-TEST_F(EncryptionOperationsTest, AesCallerNonce) {
+TEST_P(EncryptionOperationsTest, AesCallerNonce) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .AesEncryptionKey(128)
@@ -3097,7 +3097,7 @@
  * Verifies that caller-provided nonces are not permitted when not specified in the key
  * authorizations.
  */
-TEST_F(EncryptionOperationsTest, AesCallerNonceProhibited) {
+TEST_P(EncryptionOperationsTest, AesCallerNonceProhibited) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .AesEncryptionKey(128)
@@ -3132,7 +3132,7 @@
  *
  * Verifies that AES GCM mode works.
  */
-TEST_F(EncryptionOperationsTest, AesGcmRoundTripSuccess) {
+TEST_P(EncryptionOperationsTest, AesGcmRoundTripSuccess) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .AesEncryptionKey(128)
@@ -3183,7 +3183,7 @@
  * Verifies that AES GCM mode works, even when there's a long delay
  * between operations.
  */
-TEST_F(EncryptionOperationsTest, AesGcmRoundTripWithDelaySuccess) {
+TEST_P(EncryptionOperationsTest, AesGcmRoundTripWithDelaySuccess) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .AesEncryptionKey(128)
@@ -3236,7 +3236,7 @@
  *
  * Verifies that encrypting the same data with different nonces produces different outputs.
  */
-TEST_F(EncryptionOperationsTest, AesGcmDifferentNonces) {
+TEST_P(EncryptionOperationsTest, AesGcmDifferentNonces) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                                  .Authorization(TAG_NO_AUTH_REQUIRED)
                                                  .AesEncryptionKey(128)
@@ -3268,7 +3268,7 @@
  *
  * Verifies that AES GCM mode fails correctly when a too-short tag length is specified.
  */
-TEST_F(EncryptionOperationsTest, AesGcmTooShortTag) {
+TEST_P(EncryptionOperationsTest, AesGcmTooShortTag) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .AesEncryptionKey(128)
@@ -3289,7 +3289,7 @@
  *
  * Verifies that AES GCM mode fails correctly when a too-short tag is provided to decryption.
  */
-TEST_F(EncryptionOperationsTest, AesGcmTooShortTagOnDecrypt) {
+TEST_P(EncryptionOperationsTest, AesGcmTooShortTagOnDecrypt) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .AesEncryptionKey(128)
@@ -3332,7 +3332,7 @@
  *
  * Verifies that AES GCM mode fails correctly when the decryption key is incorrect.
  */
-TEST_F(EncryptionOperationsTest, AesGcmCorruptKey) {
+TEST_P(EncryptionOperationsTest, AesGcmCorruptKey) {
     const uint8_t nonce_bytes[] = {
         0xb7, 0x94, 0x37, 0xae, 0x08, 0xff, 0x35, 0x5d, 0x7d, 0x8a, 0x4d, 0x0f,
     };
@@ -3384,7 +3384,7 @@
  * Verifies that AES GCM mode works when provided additional authenticated data, but no data to
  * encrypt.
  */
-TEST_F(EncryptionOperationsTest, AesGcmAadNoData) {
+TEST_P(EncryptionOperationsTest, AesGcmAadNoData) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .AesEncryptionKey(128)
@@ -3429,7 +3429,7 @@
  *
  * Verifies that AES GCM mode works when provided additional authenticated data in multiple chunks.
  */
-TEST_F(EncryptionOperationsTest, AesGcmMultiPartAad) {
+TEST_P(EncryptionOperationsTest, AesGcmMultiPartAad) {
     const size_t tag_bits = 128;
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
@@ -3490,7 +3490,7 @@
  *
  * Verifies that AES GCM mode fails correctly when given AAD after data to encipher.
  */
-TEST_F(EncryptionOperationsTest, AesGcmAadOutOfOrder) {
+TEST_P(EncryptionOperationsTest, AesGcmAadOutOfOrder) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .AesEncryptionKey(128)
@@ -3538,7 +3538,7 @@
  *
  * Verifies that AES GCM decryption fails correctly when additional authenticated date is wrong.
  */
-TEST_F(EncryptionOperationsTest, AesGcmBadAad) {
+TEST_P(EncryptionOperationsTest, AesGcmBadAad) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .AesEncryptionKey(128)
@@ -3582,7 +3582,7 @@
  *
  * Verifies that AES GCM decryption fails correctly when the nonce is incorrect.
  */
-TEST_F(EncryptionOperationsTest, AesGcmWrongNonce) {
+TEST_P(EncryptionOperationsTest, AesGcmWrongNonce) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .AesEncryptionKey(128)
@@ -3626,7 +3626,7 @@
  *
  * Verifies that AES GCM decryption fails correctly when the tag is wrong.
  */
-TEST_F(EncryptionOperationsTest, AesGcmCorruptTag) {
+TEST_P(EncryptionOperationsTest, AesGcmCorruptTag) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .AesEncryptionKey(128)
@@ -3674,7 +3674,7 @@
  *
  * Verifies that 3DES is basically functional.
  */
-TEST_F(EncryptionOperationsTest, TripleDesEcbRoundTripSuccess) {
+TEST_P(EncryptionOperationsTest, TripleDesEcbRoundTripSuccess) {
     auto auths = AuthorizationSetBuilder()
                      .TripleDesEncryptionKey(168)
                      .BlockMode(BlockMode::ECB)
@@ -3703,7 +3703,7 @@
  *
  * Verifies that CBC keys reject ECB usage.
  */
-TEST_F(EncryptionOperationsTest, TripleDesEcbNotAuthorized) {
+TEST_P(EncryptionOperationsTest, TripleDesEcbNotAuthorized) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .TripleDesEncryptionKey(168)
                                              .BlockMode(BlockMode::CBC)
@@ -3719,7 +3719,7 @@
  *
  * Tests ECB mode with PKCS#7 padding, various message sizes.
  */
-TEST_F(EncryptionOperationsTest, TripleDesEcbPkcs7Padding) {
+TEST_P(EncryptionOperationsTest, TripleDesEcbPkcs7Padding) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .TripleDesEncryptionKey(168)
                                              .BlockMode(BlockMode::ECB)
@@ -3742,7 +3742,7 @@
  *
  * Verifies that keys configured for no padding reject PKCS7 padding
  */
-TEST_F(EncryptionOperationsTest, TripleDesEcbNoPaddingKeyWithPkcs7Padding) {
+TEST_P(EncryptionOperationsTest, TripleDesEcbNoPaddingKeyWithPkcs7Padding) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .TripleDesEncryptionKey(168)
                                              .BlockMode(BlockMode::ECB)
@@ -3760,7 +3760,7 @@
  *
  * Verifies that corrupted padding is detected.
  */
-TEST_F(EncryptionOperationsTest, TripleDesEcbPkcs7PaddingCorrupted) {
+TEST_P(EncryptionOperationsTest, TripleDesEcbPkcs7PaddingCorrupted) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .TripleDesEncryptionKey(168)
                                              .BlockMode(BlockMode::ECB)
@@ -3876,7 +3876,7 @@
  *
  * Verifies that NIST (plus a few extra) test vectors produce the correct results.
  */
-TEST_F(EncryptionOperationsTest, TripleDesTestVector) {
+TEST_P(EncryptionOperationsTest, TripleDesTestVector) {
     constexpr size_t num_tests = sizeof(kTripleDesTestVectors) / sizeof(TripleDesTestVector);
     for (auto* test = kTripleDesTestVectors; test < kTripleDesTestVectors + num_tests; ++test) {
         SCOPED_TRACE(test->name);
@@ -3891,7 +3891,7 @@
  *
  * Validates CBC mode functionality.
  */
-TEST_F(EncryptionOperationsTest, TripleDesCbcRoundTripSuccess) {
+TEST_P(EncryptionOperationsTest, TripleDesCbcRoundTripSuccess) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .TripleDesEncryptionKey(168)
                                              .BlockMode(BlockMode::CBC)
@@ -3920,7 +3920,7 @@
  *
  * Validates that 3DES keys can allow caller-specified IVs, and use them correctly.
  */
-TEST_F(EncryptionOperationsTest, TripleDesCallerIv) {
+TEST_P(EncryptionOperationsTest, TripleDesCallerIv) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .TripleDesEncryptionKey(168)
                                              .BlockMode(BlockMode::CBC)
@@ -3955,7 +3955,7 @@
  *
  * Verifies that 3DES keys without TAG_CALLER_NONCE do not allow caller-specified IVS.
  */
-TEST_F(EncryptionOperationsTest, TripleDesCallerNonceProhibited) {
+TEST_P(EncryptionOperationsTest, TripleDesCallerNonceProhibited) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .TripleDesEncryptionKey(168)
                                              .BlockMode(BlockMode::CBC)
@@ -3987,7 +3987,7 @@
  *
  * Verifies that 3DES ECB-only keys do not allow CBC usage.
  */
-TEST_F(EncryptionOperationsTest, TripleDesCbcNotAuthorized) {
+TEST_P(EncryptionOperationsTest, TripleDesCbcNotAuthorized) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .TripleDesEncryptionKey(168)
                                              .BlockMode(BlockMode::ECB)
@@ -4005,7 +4005,7 @@
  *
  * Verifies that unpadded CBC operations reject inputs that are not a multiple of block size.
  */
-TEST_F(EncryptionOperationsTest, TripleDesCbcNoPaddingWrongInputSize) {
+TEST_P(EncryptionOperationsTest, TripleDesCbcNoPaddingWrongInputSize) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .TripleDesEncryptionKey(168)
                                              .BlockMode(BlockMode::CBC)
@@ -4027,7 +4027,7 @@
  *
  * Verifies that PKCS7 padding works correctly in CBC mode.
  */
-TEST_F(EncryptionOperationsTest, TripleDesCbcPkcs7Padding) {
+TEST_P(EncryptionOperationsTest, TripleDesCbcPkcs7Padding) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .TripleDesEncryptionKey(168)
                                              .BlockMode(BlockMode::CBC)
@@ -4050,7 +4050,7 @@
  *
  * Verifies that a key that requires PKCS7 padding cannot be used in unpadded mode.
  */
-TEST_F(EncryptionOperationsTest, TripleDesCbcNoPaddingKeyWithPkcs7Padding) {
+TEST_P(EncryptionOperationsTest, TripleDesCbcNoPaddingKeyWithPkcs7Padding) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .TripleDesEncryptionKey(168)
                                              .BlockMode(BlockMode::CBC)
@@ -4070,7 +4070,7 @@
  *
  * Verifies that corrupted PKCS7 padding is rejected during decryption.
  */
-TEST_F(EncryptionOperationsTest, TripleDesCbcPkcs7PaddingCorrupted) {
+TEST_P(EncryptionOperationsTest, TripleDesCbcPkcs7PaddingCorrupted) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .TripleDesEncryptionKey(168)
                                              .BlockMode(BlockMode::CBC)
@@ -4101,7 +4101,7 @@
  *
  * Verifies that 3DES CBC works with many different input sizes.
  */
-TEST_F(EncryptionOperationsTest, TripleDesCbcIncrementalNoPadding) {
+TEST_P(EncryptionOperationsTest, TripleDesCbcIncrementalNoPadding) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .TripleDesEncryptionKey(168)
                                              .BlockMode(BlockMode::CBC)
@@ -4146,7 +4146,7 @@
  *
  * Verifies that the max uses per boot tag works correctly with AES keys.
  */
-TEST_F(MaxOperationsTest, TestLimitAes) {
+TEST_P(MaxOperationsTest, TestLimitAes) {
     if (SecLevel() == SecurityLevel::STRONGBOX) return;
 
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
@@ -4173,7 +4173,7 @@
  *
  * Verifies that the max uses per boot tag works correctly with RSA keys.
  */
-TEST_F(MaxOperationsTest, TestLimitRsa) {
+TEST_P(MaxOperationsTest, TestLimitRsa) {
     if (SecLevel() == SecurityLevel::STRONGBOX) return;
 
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
@@ -4202,7 +4202,7 @@
  * Verifies that the addRngEntropy method doesn't blow up.  There's no way to test that entropy is
  * actually added.
  */
-TEST_F(AddEntropyTest, AddEntropy) {
+TEST_P(AddEntropyTest, AddEntropy) {
     EXPECT_EQ(ErrorCode::OK, keymaster().addRngEntropy(HidlBuf("foo")));
 }
 
@@ -4211,7 +4211,7 @@
  *
  * Verifies that the addRngEntropy method doesn't blow up when given an empty buffer.
  */
-TEST_F(AddEntropyTest, AddEmptyEntropy) {
+TEST_P(AddEntropyTest, AddEmptyEntropy) {
     EXPECT_EQ(ErrorCode::OK, keymaster().addRngEntropy(HidlBuf()));
 }
 
@@ -4220,7 +4220,7 @@
  *
  * Verifies that the addRngEntropy method doesn't blow up when given a largish amount of data.
  */
-TEST_F(AddEntropyTest, AddLargeEntropy) {
+TEST_P(AddEntropyTest, AddLargeEntropy) {
     EXPECT_EQ(ErrorCode::OK, keymaster().addRngEntropy(HidlBuf(string(2 * 1024, 'a'))));
 }
 
@@ -4231,7 +4231,7 @@
  *
  * Verifies that attesting to RSA keys works and generates the expected output.
  */
-TEST_F(AttestationTest, RsaAttestation) {
+TEST_P(AttestationTest, RsaAttestation) {
     auto creation_time = std::chrono::system_clock::now();
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
@@ -4265,7 +4265,7 @@
  *
  * Verifies that attesting to RSA requires app ID.
  */
-TEST_F(AttestationTest, RsaAttestationRequiresAppId) {
+TEST_P(AttestationTest, RsaAttestationRequiresAppId) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .RsaSigningKey(2048, 65537)
@@ -4285,7 +4285,7 @@
  *
  * Verifies that attesting to EC keys works and generates the expected output.
  */
-TEST_F(AttestationTest, EcAttestation) {
+TEST_P(AttestationTest, EcAttestation) {
     auto creation_time = std::chrono::system_clock::now();
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
@@ -4316,7 +4316,7 @@
  *
  * Verifies that attesting to EC keys requires app ID
  */
-TEST_F(AttestationTest, EcAttestationRequiresAttestationAppId) {
+TEST_P(AttestationTest, EcAttestationRequiresAttestationAppId) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .EcdsaSigningKey(EcCurve::P_256)
@@ -4338,7 +4338,7 @@
  * byte. Proper DER encoding specifies that for lengths greather than 127, one byte should be used
  * to specify how many following bytes will be used to encode the length.
  */
-TEST_F(AttestationTest, AttestationApplicationIDLengthProperlyEncoded) {
+TEST_P(AttestationTest, AttestationApplicationIDLengthProperlyEncoded) {
     std::vector<uint32_t> app_id_lengths{143, 258};
     for (uint32_t length : app_id_lengths) {
         auto creation_time = std::chrono::system_clock::now();
@@ -4368,7 +4368,7 @@
  *
  * Verifies that attesting to AES keys fails in the expected way.
  */
-TEST_F(AttestationTest, AesAttestation) {
+TEST_P(AttestationTest, AesAttestation) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .AesEncryptionKey(128)
@@ -4388,7 +4388,7 @@
  *
  * Verifies that attesting to HMAC keys fails in the expected way.
  */
-TEST_F(AttestationTest, HmacAttestation) {
+TEST_P(AttestationTest, HmacAttestation) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .HmacKey(128)
@@ -4412,7 +4412,7 @@
  * This test checks that if rollback protection is implemented, DeleteKey invalidates a formerly
  * valid key blob.
  */
-TEST_F(KeyDeletionTest, DeleteKey) {
+TEST_P(KeyDeletionTest, DeleteKey) {
     auto error = GenerateKey(AuthorizationSetBuilder()
                                      .RsaSigningKey(2048, 65537)
                                      .Digest(Digest::NONE)
@@ -4444,7 +4444,7 @@
  *
  * This test checks that the HAL excepts invalid key blobs..
  */
-TEST_F(KeyDeletionTest, DeleteInvalidKey) {
+TEST_P(KeyDeletionTest, DeleteInvalidKey) {
     // Generate key just to check if rollback protection is implemented
     auto error = GenerateKey(AuthorizationSetBuilder()
                                      .RsaSigningKey(2048, 65537)
@@ -4480,7 +4480,7 @@
  * been provisioned. Use this test only on dedicated testing devices that have no valuable
  * credentials stored in Keystore/Keymaster.
  */
-TEST_F(KeyDeletionTest, DeleteAllKeys) {
+TEST_P(KeyDeletionTest, DeleteAllKeys) {
     if (!arm_deleteAllKeys) return;
     auto error = GenerateKey(AuthorizationSetBuilder()
                                      .RsaSigningKey(2048, 65537)
@@ -4516,7 +4516,7 @@
  *
  * Verifies that calling upgrade key on an up-to-date key works (i.e. does nothing).
  */
-TEST_F(UpgradeKeyTest, UpgradeKey) {
+TEST_P(UpgradeKeyTest, UpgradeKey) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .AesEncryptionKey(128)
                                              .Padding(PaddingMode::NONE)
@@ -4528,7 +4528,6 @@
     EXPECT_EQ(result, std::make_pair(ErrorCode::OK, HidlBuf()));
 }
 
-
 using ClearOperationsTest = KeymasterHidlTest;
 
 /*
@@ -4539,7 +4538,7 @@
  * that aborting the operations clears the operations.
  *
  */
-TEST_F(ClearOperationsTest, TooManyOperations) {
+TEST_P(ClearOperationsTest, TooManyOperations) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .RsaEncryptionKey(2048, 65537)
@@ -4571,8 +4570,7 @@
  * Verifies that the service is restarted after death and the ongoing
  * operations are cleared.
  */
-TEST_F(ClearOperationsTest, ServiceDeath) {
-
+TEST_P(ClearOperationsTest, ServiceDeath) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .RsaEncryptionKey(2048, 65537)
@@ -4612,7 +4610,7 @@
  *
  * Verifies that passing large input data to finish either succeeds or fails as expected.
  */
-TEST_F(TransportLimitTest, LargeFinishInput) {
+TEST_P(TransportLimitTest, LargeFinishInput) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                                  .Authorization(TAG_NO_AUTH_REQUIRED)
                                                  .AesEncryptionKey(128)
@@ -4657,18 +4655,53 @@
     CheckedDeleteKey();
 }
 
+static const auto kKeymasterDeviceChoices =
+        testing::ValuesIn(android::hardware::getAllHalInstanceNames(IKeymasterDevice::descriptor));
+
+INSTANTIATE_TEST_SUITE_P(PerInstance, NewKeyGenerationTest, kKeymasterDeviceChoices,
+                         android::hardware::PrintInstanceNameToString);
+
+INSTANTIATE_TEST_SUITE_P(PerInstance, ImportKeyTest, kKeymasterDeviceChoices,
+                         android::hardware::PrintInstanceNameToString);
+
+INSTANTIATE_TEST_SUITE_P(PerInstance, ImportWrappedKeyTest, kKeymasterDeviceChoices,
+                         android::hardware::PrintInstanceNameToString);
+
+INSTANTIATE_TEST_SUITE_P(PerInstance, SigningOperationsTest, kKeymasterDeviceChoices,
+                         android::hardware::PrintInstanceNameToString);
+
+INSTANTIATE_TEST_SUITE_P(PerInstance, VerificationOperationsTest, kKeymasterDeviceChoices,
+                         android::hardware::PrintInstanceNameToString);
+
+INSTANTIATE_TEST_SUITE_P(PerInstance, ExportKeyTest, kKeymasterDeviceChoices,
+                         android::hardware::PrintInstanceNameToString);
+
+INSTANTIATE_TEST_SUITE_P(PerInstance, EncryptionOperationsTest, kKeymasterDeviceChoices,
+                         android::hardware::PrintInstanceNameToString);
+
+INSTANTIATE_TEST_SUITE_P(PerInstance, MaxOperationsTest, kKeymasterDeviceChoices,
+                         android::hardware::PrintInstanceNameToString);
+
+INSTANTIATE_TEST_SUITE_P(PerInstance, AddEntropyTest, kKeymasterDeviceChoices,
+                         android::hardware::PrintInstanceNameToString);
+
+INSTANTIATE_TEST_SUITE_P(PerInstance, AttestationTest, kKeymasterDeviceChoices,
+                         android::hardware::PrintInstanceNameToString);
+
+INSTANTIATE_TEST_SUITE_P(PerInstance, KeyDeletionTest, kKeymasterDeviceChoices,
+                         android::hardware::PrintInstanceNameToString);
+
+INSTANTIATE_TEST_SUITE_P(PerInstance, TransportLimitTest, kKeymasterDeviceChoices,
+                         android::hardware::PrintInstanceNameToString);
+
 }  // namespace test
 }  // namespace V4_0
 }  // namespace keymaster
 }  // namespace hardware
 }  // namespace android
 
-using android::hardware::keymaster::V4_0::test::KeymasterHidlEnvironment;
-
 int main(int argc, char** argv) {
-    ::testing::AddGlobalTestEnvironment(KeymasterHidlEnvironment::Instance());
     ::testing::InitGoogleTest(&argc, argv);
-    KeymasterHidlEnvironment::Instance()->init(&argc, argv);
     for (int i = 1; i < argc; ++i) {
         if (argv[i][0] == '-') {
             if (std::string(argv[i]) == "--arm_deleteAllKeys") {
diff --git a/radio/1.5/IRadio.hal b/radio/1.5/IRadio.hal
index 6d422be..aa93ef3 100644
--- a/radio/1.5/IRadio.hal
+++ b/radio/1.5/IRadio.hal
@@ -42,16 +42,20 @@
      * -EUTRAN   - RSRP/RSRQ/RSSNR
      * -NGRAN    - SSRSRP/SSRSRQ/SSSINR
      *
-     * Note: Reporting criteria must be individually set for each RAN. For any unset reporting
-     * criteria, the value is implementation-defined.
+     * Note: Reporting criteria must be individually set for each RAN. For each RAN, if none of
+     * reporting criteria of any measurement is set enabled
+     * (see @1.5::SignalThresholdInfo.isEnabled), the reporting criteria for this RAN is
+     * implementation-defined. For each RAN, if any of reporting criteria of any measure is set
+     * enabled, the reporting criteria of the other measures in this RAN are set disabled
+     * (see @1.5::SignalThresholdInfo.isEnabled) until they are set enabled.
      *
      * Response callback is
      * IRadioResponse.setSignalStrengthReportingCriteriaResponse_1_5()
      *
      * @param serial Serial number of request.
      * @param signalThresholdInfo Signal threshold info including the threshold values,
-     *                            hysteresisDb, and hysteresisMs. See @1.5::SignalThresholdInfo
-     *                            for details.
+     *                            hysteresisDb, hysteresisMs and isEnabled.
+     *                            See @1.5::SignalThresholdInfo for details.
      * @param accessNetwork The type of network for which to apply these thresholds.
      */
     oneway setSignalStrengthReportingCriteria_1_5(int32_t serial,
diff --git a/radio/1.5/types.hal b/radio/1.5/types.hal
index 664ddc4..04a9bcf 100644
--- a/radio/1.5/types.hal
+++ b/radio/1.5/types.hal
@@ -113,6 +113,15 @@
      * A vector size of 0 disables the use of thresholds for reporting.
      */
     vec<int32_t> thresholds;
+
+    /**
+     * Indicates whether the reporting criteria of the corresponding measurement is enabled
+     * (isEnabled==true) or disabled (isEnabled==false).
+     *
+     * If enabled, modem must trigger the report based on the criteria.
+     * If disabled, modem must not trigger the report based on the criteria.
+     */
+    bool isEnabled;
 };
 
 enum AccessNetwork : @1.4::AccessNetwork {
diff --git a/radio/1.5/vts/functional/radio_hidl_hal_api.cpp b/radio/1.5/vts/functional/radio_hidl_hal_api.cpp
index 4df5b14..6bf8170 100644
--- a/radio/1.5/vts/functional/radio_hidl_hal_api.cpp
+++ b/radio/1.5/vts/functional/radio_hidl_hal_api.cpp
@@ -29,6 +29,7 @@
     signalThresholdInfo.hysteresisMs = 5000;
     signalThresholdInfo.hysteresisDb = 10;  // hysteresisDb too large given threshold list deltas
     signalThresholdInfo.thresholds = {-109, -103, -97, -89};
+    signalThresholdInfo.isEnabled = true;
 
     Return<void> res = radio_v1_5->setSignalStrengthReportingCriteria_1_5(
             serial, signalThresholdInfo, ::android::hardware::radio::V1_5::AccessNetwork::GERAN);
@@ -52,6 +53,7 @@
     signalThresholdInfo.signalMeasurement = SignalMeasurementType::RSSI;
     signalThresholdInfo.hysteresisMs = 0;
     signalThresholdInfo.hysteresisDb = 0;
+    signalThresholdInfo.isEnabled = true;
 
     Return<void> res = radio_v1_5->setSignalStrengthReportingCriteria_1_5(
             serial, signalThresholdInfo, ::android::hardware::radio::V1_5::AccessNetwork::GERAN);
@@ -76,6 +78,7 @@
     signalThresholdInfo.hysteresisMs = 5000;
     signalThresholdInfo.hysteresisDb = 2;
     signalThresholdInfo.thresholds = {-109, -103, -97, -89};
+    signalThresholdInfo.isEnabled = true;
 
     Return<void> res = radio_v1_5->setSignalStrengthReportingCriteria_1_5(
             serial, signalThresholdInfo, ::android::hardware::radio::V1_5::AccessNetwork::GERAN);
@@ -100,6 +103,7 @@
     signalThresholdInfo.hysteresisMs = 5000;
     signalThresholdInfo.hysteresisDb = 2;
     signalThresholdInfo.thresholds = {-110, -97, -73, -49, -25};
+    signalThresholdInfo.isEnabled = true;
 
     Return<void> res = radio_v1_5->setSignalStrengthReportingCriteria_1_5(
             serial, signalThresholdInfo, ::android::hardware::radio::V1_5::AccessNetwork::UTRAN);
@@ -124,6 +128,7 @@
     signalThresholdInfo.hysteresisMs = 5000;
     signalThresholdInfo.hysteresisDb = 2;
     signalThresholdInfo.thresholds = {-128, -108, -88, -68};
+    signalThresholdInfo.isEnabled = true;
 
     Return<void> res = radio_v1_5->setSignalStrengthReportingCriteria_1_5(
             serial, signalThresholdInfo, ::android::hardware::radio::V1_5::AccessNetwork::EUTRAN);
@@ -148,6 +153,7 @@
     signalThresholdInfo.hysteresisMs = 5000;
     signalThresholdInfo.hysteresisDb = 2;
     signalThresholdInfo.thresholds = {-27, -20, -13, -6};
+    signalThresholdInfo.isEnabled = true;
 
     Return<void> res = radio_v1_5->setSignalStrengthReportingCriteria_1_5(
             serial, signalThresholdInfo, ::android::hardware::radio::V1_5::AccessNetwork::EUTRAN);
@@ -172,6 +178,7 @@
     signalThresholdInfo.hysteresisMs = 5000;
     signalThresholdInfo.hysteresisDb = 2;
     signalThresholdInfo.thresholds = {-10, 0, 10, 20};
+    signalThresholdInfo.isEnabled = true;
 
     Return<void> res = radio_v1_5->setSignalStrengthReportingCriteria_1_5(
             serial, signalThresholdInfo, ::android::hardware::radio::V1_5::AccessNetwork::EUTRAN);
@@ -192,6 +199,7 @@
     signalThresholdInfo.hysteresisMs = 5000;
     signalThresholdInfo.hysteresisDb = 2;
     signalThresholdInfo.thresholds = {-105, -90, -75, -65};
+    signalThresholdInfo.isEnabled = true;
 
     Return<void> res = radio_v1_5->setSignalStrengthReportingCriteria_1_5(
             serial, signalThresholdInfo, ::android::hardware::radio::V1_5::AccessNetwork::CDMA2000);
@@ -216,6 +224,7 @@
     signalThresholdInfo.hysteresisMs = 5000;
     signalThresholdInfo.hysteresisDb = 0;
     signalThresholdInfo.thresholds = {-105, -90, -75, -65};
+    signalThresholdInfo.isEnabled = true;
 
     Return<void> res = radio_v1_5->setSignalStrengthReportingCriteria_1_5(
             serial, signalThresholdInfo, ::android::hardware::radio::V1_5::AccessNetwork::NGRAN);
@@ -240,6 +249,7 @@
     signalThresholdInfo.hysteresisMs = 5000;
     signalThresholdInfo.hysteresisDb = 0;
     signalThresholdInfo.thresholds = {-15, -10, -5, -4};
+    signalThresholdInfo.isEnabled = true;
 
     Return<void> res = radio_v1_5->setSignalStrengthReportingCriteria_1_5(
             serial, signalThresholdInfo, ::android::hardware::radio::V1_5::AccessNetwork::NGRAN);
@@ -254,6 +264,27 @@
 }
 
 /*
+ * Test IRadio.setSignalStrengthReportingCriteria_1_5() for EUTRAN
+ */
+TEST_F(RadioHidlTest_v1_5, setSignalStrengthReportingCriteria_1_5_Disable_RSSNR) {
+    serial = GetRandomSerialNumber();
+
+    ::android::hardware::radio::V1_5::SignalThresholdInfo signalThresholdInfo;
+    signalThresholdInfo.signalMeasurement = SignalMeasurementType::RSSNR;
+    signalThresholdInfo.hysteresisMs = 5000;
+    signalThresholdInfo.hysteresisDb = 2;
+    signalThresholdInfo.thresholds = {-10, 0, 10, 20};
+    signalThresholdInfo.isEnabled = false;
+
+    Return<void> res = radio_v1_5->setSignalStrengthReportingCriteria_1_5(
+            serial, signalThresholdInfo, ::android::hardware::radio::V1_5::AccessNetwork::EUTRAN);
+    ASSERT_OK(res);
+    EXPECT_EQ(std::cv_status::no_timeout, wait());
+    EXPECT_EQ(RadioResponseType::SOLICITED, radioRsp_v1_5->rspInfo.type);
+    EXPECT_EQ(serial, radioRsp_v1_5->rspInfo.serial);
+}
+
+/*
  * Test IRadio.setSignalStrengthReportingCriteria_1_5() for NGRAN_SSSINR
  */
 TEST_F(RadioHidlTest_v1_5, setSignalStrengthReportingCriteria_1_5_NGRAN_SSSINR) {
@@ -264,6 +295,7 @@
     signalThresholdInfo.hysteresisMs = 5000;
     signalThresholdInfo.hysteresisDb = 0;
     signalThresholdInfo.thresholds = {-10, 3, 16, 18};
+    signalThresholdInfo.isEnabled = true;
 
     Return<void> res = radio_v1_5->setSignalStrengthReportingCriteria_1_5(
             serial, signalThresholdInfo, ::android::hardware::radio::V1_5::AccessNetwork::NGRAN);
diff --git a/secure_element/1.0/vts/functional/Android.bp b/secure_element/1.0/vts/functional/Android.bp
index 2b2b73e..6dbd027 100644
--- a/secure_element/1.0/vts/functional/Android.bp
+++ b/secure_element/1.0/vts/functional/Android.bp
@@ -21,5 +21,5 @@
     static_libs: [
         "android.hardware.secure_element@1.0",
     ],
-    test_suites: ["general-tests"],
+    test_suites: ["general-tests", "vts-core"],
 }
diff --git a/secure_element/1.0/vts/functional/VtsHalSecureElementV1_0TargetTest.cpp b/secure_element/1.0/vts/functional/VtsHalSecureElementV1_0TargetTest.cpp
index 671923a..93ffd05 100644
--- a/secure_element/1.0/vts/functional/VtsHalSecureElementV1_0TargetTest.cpp
+++ b/secure_element/1.0/vts/functional/VtsHalSecureElementV1_0TargetTest.cpp
@@ -20,10 +20,11 @@
 #include <android/hardware/secure_element/1.0/ISecureElement.h>
 #include <android/hardware/secure_element/1.0/ISecureElementHalCallback.h>
 #include <android/hardware/secure_element/1.0/types.h>
+#include <gtest/gtest.h>
+#include <hidl/GtestPrinter.h>
+#include <hidl/ServiceManagement.h>
 
 #include <VtsHalHidlTargetCallbackBase.h>
-#include <VtsHalHidlTargetTestBase.h>
-#include <VtsHalHidlTargetTestEnvBase.h>
 
 using ::android::hardware::secure_element::V1_0::ISecureElement;
 using ::android::hardware::secure_element::V1_0::ISecureElementHalCallback;
@@ -32,7 +33,6 @@
 using ::android::hardware::Return;
 using ::android::hardware::Void;
 using ::android::sp;
-using ::testing::VtsHalHidlTargetTestEnvBase;
 
 #define DATA_APDU \
     { 0x00, 0x08, 0x00, 0x00, 0x00 }
@@ -63,30 +63,11 @@
     };
 };
 
-class SecureElementHidlEnvironment : public VtsHalHidlTargetTestEnvBase {
-   public:
-    // get the test environment singleton
-    static SecureElementHidlEnvironment* Instance() {
-        static SecureElementHidlEnvironment* instance = new SecureElementHidlEnvironment;
-        return instance;
-    }
-
-    virtual void registerTestServices() override { registerTestService<ISecureElement>(); }
-
-   private:
-    SecureElementHidlEnvironment() {}
-
-    GTEST_DISALLOW_COPY_AND_ASSIGN_(SecureElementHidlEnvironment);
-};
-
-class SecureElementHidlTest : public ::testing::VtsHalHidlTargetTestBase {
-   public:
+class SecureElementHidlTest : public ::testing::TestWithParam<std::string> {
+  public:
     virtual void SetUp() override {
-        std::string serviceName =
-            SecureElementHidlEnvironment::Instance()->getServiceName<ISecureElement>("eSE1");
-        LOG(INFO) << "get service with name:" << serviceName;
-        ASSERT_FALSE(serviceName.empty());
-        se_ = ::testing::VtsHalHidlTargetTestBase::getService<ISecureElement>(serviceName);
+        LOG(INFO) << "get service with name:" << GetParam();
+        se_ = ISecureElement::getService(GetParam());
         ASSERT_NE(se_, nullptr);
 
         se_cb_ = new SecureElementHalCallback();
@@ -105,7 +86,7 @@
  * isCardPresent:
  * Expects the card to be present
  */
-TEST_F(SecureElementHidlTest, isCardPresent) {
+TEST_P(SecureElementHidlTest, isCardPresent) {
     EXPECT_TRUE(se_->isCardPresent());
 }
 
@@ -113,7 +94,7 @@
  * transmit:
  * Check status word in the response
  */
-TEST_F(SecureElementHidlTest, transmit) {
+TEST_P(SecureElementHidlTest, transmit) {
     std::vector<uint8_t> aid = ANDROID_TEST_AID;
     SecureElementStatus statusReturned;
     LogicalChannelResponse response;
@@ -153,7 +134,7 @@
  * If the secure element allows opening of basic channel:
  *  open channel, check the length of selectResponse and close the channel
  */
-TEST_F(SecureElementHidlTest, openBasicChannel) {
+TEST_P(SecureElementHidlTest, openBasicChannel) {
     std::vector<uint8_t> aid = ANDROID_TEST_AID;
     SecureElementStatus statusReturned;
     std::vector<uint8_t> response;
@@ -179,7 +160,7 @@
 /*
  * GetATR
  */
-TEST_F(SecureElementHidlTest, getAtr) {
+TEST_P(SecureElementHidlTest, getAtr) {
     std::vector<uint8_t> atr;
     se_->getAtr([&atr](std::vector<uint8_t> atrReturned) {
         atr.resize(atrReturned.size());
@@ -200,7 +181,7 @@
  * Check status
  * Close Channel
  */
-TEST_F(SecureElementHidlTest, openCloseLogicalChannel) {
+TEST_P(SecureElementHidlTest, openCloseLogicalChannel) {
     std::vector<uint8_t> aid = ANDROID_TEST_AID;
     SecureElementStatus statusReturned;
     LogicalChannelResponse response;
@@ -223,10 +204,7 @@
     EXPECT_EQ(SecureElementStatus::SUCCESS, se_->closeChannel(response.channelNumber));
 }
 
-int main(int argc, char** argv) {
-    ::testing::AddGlobalTestEnvironment(SecureElementHidlEnvironment::Instance());
-    ::testing::InitGoogleTest(&argc, argv);
-    SecureElementHidlEnvironment::Instance()->init(&argc, argv);
-    int status = RUN_ALL_TESTS();
-    return status;
-}
+INSTANTIATE_TEST_SUITE_P(
+        PerInstance, SecureElementHidlTest,
+        testing::ValuesIn(android::hardware::getAllHalInstanceNames(ISecureElement::descriptor)),
+        android::hardware::PrintInstanceNameToString);
\ No newline at end of file
diff --git a/secure_element/1.1/vts/functional/Android.bp b/secure_element/1.1/vts/functional/Android.bp
index 51410bd..a2c39dc 100644
--- a/secure_element/1.1/vts/functional/Android.bp
+++ b/secure_element/1.1/vts/functional/Android.bp
@@ -22,5 +22,5 @@
         "android.hardware.secure_element@1.0",
         "android.hardware.secure_element@1.1",
     ],
-    test_suites: ["general-tests"],
+    test_suites: ["general-tests", "vts-core"],
 }
diff --git a/secure_element/1.1/vts/functional/VtsHalSecureElementV1_1TargetTest.cpp b/secure_element/1.1/vts/functional/VtsHalSecureElementV1_1TargetTest.cpp
index f8765ca..66fc47c 100644
--- a/secure_element/1.1/vts/functional/VtsHalSecureElementV1_1TargetTest.cpp
+++ b/secure_element/1.1/vts/functional/VtsHalSecureElementV1_1TargetTest.cpp
@@ -22,10 +22,11 @@
 #include <android/hardware/secure_element/1.0/types.h>
 #include <android/hardware/secure_element/1.1/ISecureElement.h>
 #include <android/hardware/secure_element/1.1/ISecureElementHalCallback.h>
+#include <gtest/gtest.h>
+#include <hidl/GtestPrinter.h>
+#include <hidl/ServiceManagement.h>
 
 #include <VtsHalHidlTargetCallbackBase.h>
-#include <VtsHalHidlTargetTestBase.h>
-#include <VtsHalHidlTargetTestEnvBase.h>
 
 using ::android::sp;
 using ::android::hardware::hidl_string;
@@ -33,7 +34,6 @@
 using ::android::hardware::Void;
 using ::android::hardware::secure_element::V1_1::ISecureElement;
 using ::android::hardware::secure_element::V1_1::ISecureElementHalCallback;
-using ::testing::VtsHalHidlTargetTestEnvBase;
 
 constexpr char kCallbackNameOnStateChange[] = "onStateChange";
 
@@ -60,30 +60,11 @@
     Return<void> onStateChange(__attribute__((unused)) bool state) override { return Void(); }
 };
 
-class SecureElementHidlEnvironment : public VtsHalHidlTargetTestEnvBase {
-   public:
-    // get the test environment singleton
-    static SecureElementHidlEnvironment* Instance() {
-        static SecureElementHidlEnvironment* instance = new SecureElementHidlEnvironment;
-        return instance;
-    }
-
-    virtual void registerTestServices() override { registerTestService<ISecureElement>(); }
-
-   private:
-    SecureElementHidlEnvironment() {}
-
-    GTEST_DISALLOW_COPY_AND_ASSIGN_(SecureElementHidlEnvironment);
-};
-
-class SecureElementHidlTest : public ::testing::VtsHalHidlTargetTestBase {
-   public:
+class SecureElementHidlTest : public ::testing::TestWithParam<std::string> {
+  public:
     virtual void SetUp() override {
-        std::string serviceName =
-                SecureElementHidlEnvironment::Instance()->getServiceName<ISecureElement>("eSE1");
-        LOG(INFO) << "get service with name:" << serviceName;
-        ASSERT_FALSE(serviceName.empty());
-        se_ = ::testing::VtsHalHidlTargetTestBase::getService<ISecureElement>(serviceName);
+        LOG(INFO) << "get service with name:" << GetParam();
+        se_ = ISecureElement::getService(GetParam());
         ASSERT_NE(se_, nullptr);
 
         se_cb_ = new SecureElementHalCallback();
@@ -103,14 +84,11 @@
  * isCardPresent:
  * Expects the card to be present
  */
-TEST_F(SecureElementHidlTest, isCardPresent) {
+TEST_P(SecureElementHidlTest, isCardPresent) {
     EXPECT_TRUE(se_->isCardPresent());
 }
 
-int main(int argc, char** argv) {
-    ::testing::AddGlobalTestEnvironment(SecureElementHidlEnvironment::Instance());
-    ::testing::InitGoogleTest(&argc, argv);
-    SecureElementHidlEnvironment::Instance()->init(&argc, argv);
-    int status = RUN_ALL_TESTS();
-    return status;
-}
+INSTANTIATE_TEST_SUITE_P(
+        PerInstance, SecureElementHidlTest,
+        testing::ValuesIn(android::hardware::getAllHalInstanceNames(ISecureElement::descriptor)),
+        android::hardware::PrintInstanceNameToString);
diff --git a/sensors/1.0/vts/functional/Android.bp b/sensors/1.0/vts/functional/Android.bp
index 7bb992b..1167fd4 100644
--- a/sensors/1.0/vts/functional/Android.bp
+++ b/sensors/1.0/vts/functional/Android.bp
@@ -31,6 +31,6 @@
         "android.hardware.sensors@1.0",
         "VtsHalSensorsTargetTestUtils",
     ],
-    test_suites: ["general-tests"],
+    test_suites: ["general-tests", "vts-core"],
 }
 
diff --git a/sensors/1.0/vts/functional/AndroidTest.xml b/sensors/1.0/vts/functional/AndroidTest.xml
new file mode 100644
index 0000000..fb0d64c
--- /dev/null
+++ b/sensors/1.0/vts/functional/AndroidTest.xml
@@ -0,0 +1,39 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2019 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+<configuration description="Runs VtsHalSensorsV1_0TargetTest.">
+    <option name="test-suite-tag" value="apct" />
+    <option name="test-suite-tag" value="apct-native" />
+
+    <target_preparer class="com.android.tradefed.targetprep.RootTargetPreparer">
+    </target_preparer>
+
+    <target_preparer class="com.android.tradefed.targetprep.RunCommandTargetPreparer">
+        <option name="run-command" value="stop"/>
+        <option name="teardown-command" value="start"/>
+    </target_preparer>
+
+    <target_preparer class="com.android.tradefed.targetprep.PushFilePreparer">
+        <option name="cleanup" value="true" />
+        <option name="push" value="VtsHalSensorsV1_0TargetTest->/data/local/tmp/VtsHalSensorsV1_0TargetTest" />
+    </target_preparer>
+
+    <test class="com.android.tradefed.testtype.GTest" >
+        <option name="native-test-timeout" value="900000" />
+        <option name="runtime-hint" value="300000"/>
+        <option name="native-test-device-path" value="/data/local/tmp" />
+        <option name="module-name" value="VtsHalSensorsV1_0TargetTest" />
+    </test>
+</configuration>
\ No newline at end of file
diff --git a/sensors/1.0/vts/functional/SensorsHidlEnvironmentV1_0.cpp b/sensors/1.0/vts/functional/SensorsHidlEnvironmentV1_0.cpp
index 00207b1..1e5e886 100644
--- a/sensors/1.0/vts/functional/SensorsHidlEnvironmentV1_0.cpp
+++ b/sensors/1.0/vts/functional/SensorsHidlEnvironmentV1_0.cpp
@@ -35,8 +35,7 @@
         // this do ... while is for easy error handling
         do {
             step = "getService()";
-            sensors = ISensors::getService(
-                SensorsHidlEnvironmentV1_0::Instance()->getServiceName<ISensors>());
+            sensors = ISensors::getService(mServiceName);
             if (sensors == nullptr) {
                 break;
             }
diff --git a/sensors/1.0/vts/functional/SensorsHidlEnvironmentV1_0.h b/sensors/1.0/vts/functional/SensorsHidlEnvironmentV1_0.h
index 0a9e59f..29bfa50 100644
--- a/sensors/1.0/vts/functional/SensorsHidlEnvironmentV1_0.h
+++ b/sensors/1.0/vts/functional/SensorsHidlEnvironmentV1_0.h
@@ -32,23 +32,14 @@
 class SensorsHidlEnvironmentV1_0 : public SensorsHidlEnvironmentBase {
    public:
     using Event = ::android::hardware::sensors::V1_0::Event;
-    // get the test environment singleton
-    static SensorsHidlEnvironmentV1_0* Instance() {
-        static SensorsHidlEnvironmentV1_0* instance = new SensorsHidlEnvironmentV1_0();
-        return instance;
-    }
+    SensorsHidlEnvironmentV1_0(const std::string& service_name)
+        : SensorsHidlEnvironmentBase(service_name) {}
 
-    virtual void registerTestServices() override {
-        registerTestService<android::hardware::sensors::V1_0::ISensors>();
-    }
-
-   private:
+  private:
     friend SensorsHidlTest;
     // sensors hidl service
     sp<android::hardware::sensors::V1_0::ISensors> sensors;
 
-    SensorsHidlEnvironmentV1_0() {}
-
     bool resetHal() override;
     void startPollingThread() override;
     static void pollingThread(SensorsHidlEnvironmentV1_0* env, std::atomic_bool& stop);
diff --git a/sensors/1.0/vts/functional/VtsHalSensorsV1_0TargetTest.cpp b/sensors/1.0/vts/functional/VtsHalSensorsV1_0TargetTest.cpp
index 5453ef6..2cad54d 100644
--- a/sensors/1.0/vts/functional/VtsHalSensorsV1_0TargetTest.cpp
+++ b/sensors/1.0/vts/functional/VtsHalSensorsV1_0TargetTest.cpp
@@ -19,6 +19,8 @@
 
 #include <android/hardware/sensors/1.0/ISensors.h>
 #include <android/hardware/sensors/1.0/types.h>
+#include <hidl/GtestPrinter.h>
+#include <hidl/ServiceManagement.h>
 #include <log/log.h>
 #include <utils/SystemClock.h>
 
@@ -33,7 +35,17 @@
 // The main test class for SENSORS HIDL HAL.
 
 class SensorsHidlTest : public SensorsHidlTestBase {
-   protected:
+  public:
+    virtual void SetUp() override {
+        mEnvironment = new SensorsHidlEnvironmentV1_0(GetParam());
+        mEnvironment->HidlSetUp();
+        // Ensure that we have a valid environment before performing tests
+        ASSERT_NE(S(), nullptr);
+    }
+
+    virtual void TearDown() override { mEnvironment->HidlTearDown(); }
+
+  protected:
     SensorInfo defaultSensorByType(SensorType type) override;
     std::vector<SensorInfo> getSensorsList();
     // implementation wrapper
@@ -66,11 +78,13 @@
         return S()->configDirectReport(sensorHandle, channelHandle, rate, _hidl_cb);
     }
 
-    inline sp<ISensors>& S() { return SensorsHidlEnvironmentV1_0::Instance()->sensors; }
+    inline sp<ISensors>& S() { return mEnvironment->sensors; }
 
-    SensorsHidlEnvironmentBase* getEnvironment() override {
-        return SensorsHidlEnvironmentV1_0::Instance();
-    }
+    SensorsHidlEnvironmentBase* getEnvironment() override { return mEnvironment; }
+
+  private:
+    // Test environment for sensors HAL.
+    SensorsHidlEnvironmentV1_0* mEnvironment;
 };
 
 Return<Result> SensorsHidlTest::activate(int32_t sensorHandle, bool enabled) {
@@ -133,55 +147,52 @@
 }
 
 // Test if sensor list returned is valid
-TEST_F(SensorsHidlTest, SensorListValid) {
-  S()->getSensorsList(
-      [&] (const auto &list) {
+TEST_P(SensorsHidlTest, SensorListValid) {
+    S()->getSensorsList([&](const auto& list) {
         const size_t count = list.size();
         for (size_t i = 0; i < count; ++i) {
-          const auto &s = list[i];
-          SCOPED_TRACE(::testing::Message() << i << "/" << count << ": "
-                       << " handle=0x" << std::hex << std::setw(8) << std::setfill('0')
-                       << s.sensorHandle << std::dec
-                       << " type=" << static_cast<int>(s.type)
-                       << " name=" << s.name);
+            const auto& s = list[i];
+            SCOPED_TRACE(::testing::Message()
+                         << i << "/" << count << ": "
+                         << " handle=0x" << std::hex << std::setw(8) << std::setfill('0')
+                         << s.sensorHandle << std::dec << " type=" << static_cast<int>(s.type)
+                         << " name=" << s.name);
 
-          // Test non-empty type string
-          EXPECT_FALSE(s.typeAsString.empty());
+            // Test non-empty type string
+            EXPECT_FALSE(s.typeAsString.empty());
 
-          // Test defined type matches defined string type
-          EXPECT_NO_FATAL_FAILURE(assertTypeMatchStringType(s.type, s.typeAsString));
+            // Test defined type matches defined string type
+            EXPECT_NO_FATAL_FAILURE(assertTypeMatchStringType(s.type, s.typeAsString));
 
-          // Test if all sensor has name and vendor
-          EXPECT_FALSE(s.name.empty());
-          EXPECT_FALSE(s.vendor.empty());
+            // Test if all sensor has name and vendor
+            EXPECT_FALSE(s.name.empty());
+            EXPECT_FALSE(s.vendor.empty());
 
-          // Test power > 0, maxRange > 0
-          EXPECT_LE(0, s.power);
-          EXPECT_LT(0, s.maxRange);
+            // Test power > 0, maxRange > 0
+            EXPECT_LE(0, s.power);
+            EXPECT_LT(0, s.maxRange);
 
-          // Info type, should have no sensor
-          EXPECT_FALSE(
-              s.type == SensorType::ADDITIONAL_INFO
-              || s.type == SensorType::META_DATA);
+            // Info type, should have no sensor
+            EXPECT_FALSE(s.type == SensorType::ADDITIONAL_INFO || s.type == SensorType::META_DATA);
 
-          // Test fifoMax >= fifoReserved
-          EXPECT_GE(s.fifoMaxEventCount, s.fifoReservedEventCount)
-              << "max=" << s.fifoMaxEventCount << " reserved=" << s.fifoReservedEventCount;
+            // Test fifoMax >= fifoReserved
+            EXPECT_GE(s.fifoMaxEventCount, s.fifoReservedEventCount)
+                    << "max=" << s.fifoMaxEventCount << " reserved=" << s.fifoReservedEventCount;
 
-          // Test Reporting mode valid
-          EXPECT_NO_FATAL_FAILURE(assertTypeMatchReportMode(s.type, extractReportMode(s.flags)));
+            // Test Reporting mode valid
+            EXPECT_NO_FATAL_FAILURE(assertTypeMatchReportMode(s.type, extractReportMode(s.flags)));
 
-          // Test min max are in the right order
-          EXPECT_LE(s.minDelay, s.maxDelay);
-          // Test min/max delay matches reporting mode
-          EXPECT_NO_FATAL_FAILURE(
-              assertDelayMatchReportMode(s.minDelay, s.maxDelay, extractReportMode(s.flags)));
+            // Test min max are in the right order
+            EXPECT_LE(s.minDelay, s.maxDelay);
+            // Test min/max delay matches reporting mode
+            EXPECT_NO_FATAL_FAILURE(
+                    assertDelayMatchReportMode(s.minDelay, s.maxDelay, extractReportMode(s.flags)));
         }
-      });
+    });
 }
 
 // Test if sensor list returned is valid
-TEST_F(SensorsHidlTest, SetOperationMode) {
+TEST_P(SensorsHidlTest, SetOperationMode) {
     std::vector<SensorInfo> sensorList = getSensorsList();
 
     bool needOperationModeSupport =
@@ -199,7 +210,7 @@
 }
 
 // Test if sensor list returned is valid
-TEST_F(SensorsHidlTest, InjectSensorEventData) {
+TEST_P(SensorsHidlTest, InjectSensorEventData) {
     std::vector<SensorInfo> sensorList = getSensorsList();
     std::vector<SensorInfo> sensorSupportInjection;
 
@@ -244,224 +255,202 @@
 }
 
 // Test if sensor hal can do UI speed accelerometer streaming properly
-TEST_F(SensorsHidlTest, AccelerometerStreamingOperationSlow) {
-  testStreamingOperation(SensorType::ACCELEROMETER,
-                         std::chrono::milliseconds(200),
-                         std::chrono::seconds(5),
-                         sAccelNormChecker);
+TEST_P(SensorsHidlTest, AccelerometerStreamingOperationSlow) {
+    testStreamingOperation(SensorType::ACCELEROMETER, std::chrono::milliseconds(200),
+                           std::chrono::seconds(5), sAccelNormChecker);
 }
 
 // Test if sensor hal can do normal speed accelerometer streaming properly
-TEST_F(SensorsHidlTest, AccelerometerStreamingOperationNormal) {
-  testStreamingOperation(SensorType::ACCELEROMETER,
-                         std::chrono::milliseconds(20),
-                         std::chrono::seconds(5),
-                         sAccelNormChecker);
+TEST_P(SensorsHidlTest, AccelerometerStreamingOperationNormal) {
+    testStreamingOperation(SensorType::ACCELEROMETER, std::chrono::milliseconds(20),
+                           std::chrono::seconds(5), sAccelNormChecker);
 }
 
 // Test if sensor hal can do game speed accelerometer streaming properly
-TEST_F(SensorsHidlTest, AccelerometerStreamingOperationFast) {
-  testStreamingOperation(SensorType::ACCELEROMETER,
-                         std::chrono::milliseconds(5),
-                         std::chrono::seconds(5),
-                         sAccelNormChecker);
+TEST_P(SensorsHidlTest, AccelerometerStreamingOperationFast) {
+    testStreamingOperation(SensorType::ACCELEROMETER, std::chrono::milliseconds(5),
+                           std::chrono::seconds(5), sAccelNormChecker);
 }
 
 // Test if sensor hal can do UI speed gyroscope streaming properly
-TEST_F(SensorsHidlTest, GyroscopeStreamingOperationSlow) {
-  testStreamingOperation(SensorType::GYROSCOPE,
-                         std::chrono::milliseconds(200),
-                         std::chrono::seconds(5),
-                         sGyroNormChecker);
+TEST_P(SensorsHidlTest, GyroscopeStreamingOperationSlow) {
+    testStreamingOperation(SensorType::GYROSCOPE, std::chrono::milliseconds(200),
+                           std::chrono::seconds(5), sGyroNormChecker);
 }
 
 // Test if sensor hal can do normal speed gyroscope streaming properly
-TEST_F(SensorsHidlTest, GyroscopeStreamingOperationNormal) {
-  testStreamingOperation(SensorType::GYROSCOPE,
-                         std::chrono::milliseconds(20),
-                         std::chrono::seconds(5),
-                         sGyroNormChecker);
+TEST_P(SensorsHidlTest, GyroscopeStreamingOperationNormal) {
+    testStreamingOperation(SensorType::GYROSCOPE, std::chrono::milliseconds(20),
+                           std::chrono::seconds(5), sGyroNormChecker);
 }
 
 // Test if sensor hal can do game speed gyroscope streaming properly
-TEST_F(SensorsHidlTest, GyroscopeStreamingOperationFast) {
-  testStreamingOperation(SensorType::GYROSCOPE,
-                         std::chrono::milliseconds(5),
-                         std::chrono::seconds(5),
-                         sGyroNormChecker);
+TEST_P(SensorsHidlTest, GyroscopeStreamingOperationFast) {
+    testStreamingOperation(SensorType::GYROSCOPE, std::chrono::milliseconds(5),
+                           std::chrono::seconds(5), sGyroNormChecker);
 }
 
 // Test if sensor hal can do UI speed magnetometer streaming properly
-TEST_F(SensorsHidlTest, MagnetometerStreamingOperationSlow) {
-  testStreamingOperation(SensorType::MAGNETIC_FIELD,
-                         std::chrono::milliseconds(200),
-                         std::chrono::seconds(5),
-                         NullChecker());
+TEST_P(SensorsHidlTest, MagnetometerStreamingOperationSlow) {
+    testStreamingOperation(SensorType::MAGNETIC_FIELD, std::chrono::milliseconds(200),
+                           std::chrono::seconds(5), NullChecker());
 }
 
 // Test if sensor hal can do normal speed magnetometer streaming properly
-TEST_F(SensorsHidlTest, MagnetometerStreamingOperationNormal) {
-  testStreamingOperation(SensorType::MAGNETIC_FIELD,
-                         std::chrono::milliseconds(20),
-                         std::chrono::seconds(5),
-                         NullChecker());
+TEST_P(SensorsHidlTest, MagnetometerStreamingOperationNormal) {
+    testStreamingOperation(SensorType::MAGNETIC_FIELD, std::chrono::milliseconds(20),
+                           std::chrono::seconds(5), NullChecker());
 }
 
 // Test if sensor hal can do game speed magnetometer streaming properly
-TEST_F(SensorsHidlTest, MagnetometerStreamingOperationFast) {
-  testStreamingOperation(SensorType::MAGNETIC_FIELD,
-                         std::chrono::milliseconds(5),
-                         std::chrono::seconds(5),
-                         NullChecker());
+TEST_P(SensorsHidlTest, MagnetometerStreamingOperationFast) {
+    testStreamingOperation(SensorType::MAGNETIC_FIELD, std::chrono::milliseconds(5),
+                           std::chrono::seconds(5), NullChecker());
 }
 
 // Test if sensor hal can do accelerometer sampling rate switch properly when sensor is active
-TEST_F(SensorsHidlTest, AccelerometerSamplingPeriodHotSwitchOperation) {
-  testSamplingRateHotSwitchOperation(SensorType::ACCELEROMETER);
-  testSamplingRateHotSwitchOperation(SensorType::ACCELEROMETER, false /*fastToSlow*/);
+TEST_P(SensorsHidlTest, AccelerometerSamplingPeriodHotSwitchOperation) {
+    testSamplingRateHotSwitchOperation(SensorType::ACCELEROMETER);
+    testSamplingRateHotSwitchOperation(SensorType::ACCELEROMETER, false /*fastToSlow*/);
 }
 
 // Test if sensor hal can do gyroscope sampling rate switch properly when sensor is active
-TEST_F(SensorsHidlTest, GyroscopeSamplingPeriodHotSwitchOperation) {
-  testSamplingRateHotSwitchOperation(SensorType::GYROSCOPE);
-  testSamplingRateHotSwitchOperation(SensorType::GYROSCOPE, false /*fastToSlow*/);
+TEST_P(SensorsHidlTest, GyroscopeSamplingPeriodHotSwitchOperation) {
+    testSamplingRateHotSwitchOperation(SensorType::GYROSCOPE);
+    testSamplingRateHotSwitchOperation(SensorType::GYROSCOPE, false /*fastToSlow*/);
 }
 
 // Test if sensor hal can do magnetometer sampling rate switch properly when sensor is active
-TEST_F(SensorsHidlTest, MagnetometerSamplingPeriodHotSwitchOperation) {
-  testSamplingRateHotSwitchOperation(SensorType::MAGNETIC_FIELD);
-  testSamplingRateHotSwitchOperation(SensorType::MAGNETIC_FIELD, false /*fastToSlow*/);
+TEST_P(SensorsHidlTest, MagnetometerSamplingPeriodHotSwitchOperation) {
+    testSamplingRateHotSwitchOperation(SensorType::MAGNETIC_FIELD);
+    testSamplingRateHotSwitchOperation(SensorType::MAGNETIC_FIELD, false /*fastToSlow*/);
 }
 
 // Test if sensor hal can do accelerometer batching properly
-TEST_F(SensorsHidlTest, AccelerometerBatchingOperation) {
-  testBatchingOperation(SensorType::ACCELEROMETER);
+TEST_P(SensorsHidlTest, AccelerometerBatchingOperation) {
+    testBatchingOperation(SensorType::ACCELEROMETER);
 }
 
 // Test if sensor hal can do gyroscope batching properly
-TEST_F(SensorsHidlTest, GyroscopeBatchingOperation) {
-  testBatchingOperation(SensorType::GYROSCOPE);
+TEST_P(SensorsHidlTest, GyroscopeBatchingOperation) {
+    testBatchingOperation(SensorType::GYROSCOPE);
 }
 
 // Test if sensor hal can do magnetometer batching properly
-TEST_F(SensorsHidlTest, MagnetometerBatchingOperation) {
-  testBatchingOperation(SensorType::MAGNETIC_FIELD);
+TEST_P(SensorsHidlTest, MagnetometerBatchingOperation) {
+    testBatchingOperation(SensorType::MAGNETIC_FIELD);
 }
 
 // Test sensor event direct report with ashmem for accel sensor at normal rate
-TEST_F(SensorsHidlTest, AccelerometerAshmemDirectReportOperationNormal) {
-  testDirectReportOperation(SensorType::ACCELEROMETER, SharedMemType::ASHMEM, RateLevel::NORMAL,
-                            sAccelNormChecker);
+TEST_P(SensorsHidlTest, AccelerometerAshmemDirectReportOperationNormal) {
+    testDirectReportOperation(SensorType::ACCELEROMETER, SharedMemType::ASHMEM, RateLevel::NORMAL,
+                              sAccelNormChecker);
 }
 
 // Test sensor event direct report with ashmem for accel sensor at fast rate
-TEST_F(SensorsHidlTest, AccelerometerAshmemDirectReportOperationFast) {
-  testDirectReportOperation(SensorType::ACCELEROMETER, SharedMemType::ASHMEM, RateLevel::FAST,
-                            sAccelNormChecker);
+TEST_P(SensorsHidlTest, AccelerometerAshmemDirectReportOperationFast) {
+    testDirectReportOperation(SensorType::ACCELEROMETER, SharedMemType::ASHMEM, RateLevel::FAST,
+                              sAccelNormChecker);
 }
 
 // Test sensor event direct report with ashmem for accel sensor at very fast rate
-TEST_F(SensorsHidlTest, AccelerometerAshmemDirectReportOperationVeryFast) {
-  testDirectReportOperation(SensorType::ACCELEROMETER, SharedMemType::ASHMEM, RateLevel::VERY_FAST,
-                            sAccelNormChecker);
+TEST_P(SensorsHidlTest, AccelerometerAshmemDirectReportOperationVeryFast) {
+    testDirectReportOperation(SensorType::ACCELEROMETER, SharedMemType::ASHMEM,
+                              RateLevel::VERY_FAST, sAccelNormChecker);
 }
 
 // Test sensor event direct report with ashmem for gyro sensor at normal rate
-TEST_F(SensorsHidlTest, GyroscopeAshmemDirectReportOperationNormal) {
-  testDirectReportOperation(SensorType::GYROSCOPE, SharedMemType::ASHMEM, RateLevel::NORMAL,
-                            sGyroNormChecker);
+TEST_P(SensorsHidlTest, GyroscopeAshmemDirectReportOperationNormal) {
+    testDirectReportOperation(SensorType::GYROSCOPE, SharedMemType::ASHMEM, RateLevel::NORMAL,
+                              sGyroNormChecker);
 }
 
 // Test sensor event direct report with ashmem for gyro sensor at fast rate
-TEST_F(SensorsHidlTest, GyroscopeAshmemDirectReportOperationFast) {
-  testDirectReportOperation(SensorType::GYROSCOPE, SharedMemType::ASHMEM, RateLevel::FAST,
-                            sGyroNormChecker);
+TEST_P(SensorsHidlTest, GyroscopeAshmemDirectReportOperationFast) {
+    testDirectReportOperation(SensorType::GYROSCOPE, SharedMemType::ASHMEM, RateLevel::FAST,
+                              sGyroNormChecker);
 }
 
 // Test sensor event direct report with ashmem for gyro sensor at very fast rate
-TEST_F(SensorsHidlTest, GyroscopeAshmemDirectReportOperationVeryFast) {
-  testDirectReportOperation(SensorType::GYROSCOPE, SharedMemType::ASHMEM, RateLevel::VERY_FAST,
-                            sGyroNormChecker);
+TEST_P(SensorsHidlTest, GyroscopeAshmemDirectReportOperationVeryFast) {
+    testDirectReportOperation(SensorType::GYROSCOPE, SharedMemType::ASHMEM, RateLevel::VERY_FAST,
+                              sGyroNormChecker);
 }
 
 // Test sensor event direct report with ashmem for mag sensor at normal rate
-TEST_F(SensorsHidlTest, MagnetometerAshmemDirectReportOperationNormal) {
-  testDirectReportOperation(SensorType::MAGNETIC_FIELD, SharedMemType::ASHMEM, RateLevel::NORMAL,
-                            NullChecker());
+TEST_P(SensorsHidlTest, MagnetometerAshmemDirectReportOperationNormal) {
+    testDirectReportOperation(SensorType::MAGNETIC_FIELD, SharedMemType::ASHMEM, RateLevel::NORMAL,
+                              NullChecker());
 }
 
 // Test sensor event direct report with ashmem for mag sensor at fast rate
-TEST_F(SensorsHidlTest, MagnetometerAshmemDirectReportOperationFast) {
-  testDirectReportOperation(SensorType::MAGNETIC_FIELD, SharedMemType::ASHMEM, RateLevel::FAST,
-                            NullChecker());
+TEST_P(SensorsHidlTest, MagnetometerAshmemDirectReportOperationFast) {
+    testDirectReportOperation(SensorType::MAGNETIC_FIELD, SharedMemType::ASHMEM, RateLevel::FAST,
+                              NullChecker());
 }
 
 // Test sensor event direct report with ashmem for mag sensor at very fast rate
-TEST_F(SensorsHidlTest, MagnetometerAshmemDirectReportOperationVeryFast) {
-  testDirectReportOperation(
-      SensorType::MAGNETIC_FIELD, SharedMemType::ASHMEM, RateLevel::VERY_FAST, NullChecker());
+TEST_P(SensorsHidlTest, MagnetometerAshmemDirectReportOperationVeryFast) {
+    testDirectReportOperation(SensorType::MAGNETIC_FIELD, SharedMemType::ASHMEM,
+                              RateLevel::VERY_FAST, NullChecker());
 }
 
 // Test sensor event direct report with gralloc for accel sensor at normal rate
-TEST_F(SensorsHidlTest, AccelerometerGrallocDirectReportOperationNormal) {
-  testDirectReportOperation(SensorType::ACCELEROMETER, SharedMemType::GRALLOC, RateLevel::NORMAL,
-                            sAccelNormChecker);
+TEST_P(SensorsHidlTest, AccelerometerGrallocDirectReportOperationNormal) {
+    testDirectReportOperation(SensorType::ACCELEROMETER, SharedMemType::GRALLOC, RateLevel::NORMAL,
+                              sAccelNormChecker);
 }
 
 // Test sensor event direct report with gralloc for accel sensor at fast rate
-TEST_F(SensorsHidlTest, AccelerometerGrallocDirectReportOperationFast) {
-  testDirectReportOperation(SensorType::ACCELEROMETER, SharedMemType::GRALLOC, RateLevel::FAST,
-                            sAccelNormChecker);
+TEST_P(SensorsHidlTest, AccelerometerGrallocDirectReportOperationFast) {
+    testDirectReportOperation(SensorType::ACCELEROMETER, SharedMemType::GRALLOC, RateLevel::FAST,
+                              sAccelNormChecker);
 }
 
 // Test sensor event direct report with gralloc for accel sensor at very fast rate
-TEST_F(SensorsHidlTest, AccelerometerGrallocDirectReportOperationVeryFast) {
-  testDirectReportOperation(SensorType::ACCELEROMETER, SharedMemType::GRALLOC, RateLevel::VERY_FAST,
-                            sAccelNormChecker);
+TEST_P(SensorsHidlTest, AccelerometerGrallocDirectReportOperationVeryFast) {
+    testDirectReportOperation(SensorType::ACCELEROMETER, SharedMemType::GRALLOC,
+                              RateLevel::VERY_FAST, sAccelNormChecker);
 }
 
 // Test sensor event direct report with gralloc for gyro sensor at normal rate
-TEST_F(SensorsHidlTest, GyroscopeGrallocDirectReportOperationNormal) {
-  testDirectReportOperation(SensorType::GYROSCOPE, SharedMemType::GRALLOC, RateLevel::NORMAL,
-                            sGyroNormChecker);
+TEST_P(SensorsHidlTest, GyroscopeGrallocDirectReportOperationNormal) {
+    testDirectReportOperation(SensorType::GYROSCOPE, SharedMemType::GRALLOC, RateLevel::NORMAL,
+                              sGyroNormChecker);
 }
 
 // Test sensor event direct report with gralloc for gyro sensor at fast rate
-TEST_F(SensorsHidlTest, GyroscopeGrallocDirectReportOperationFast) {
-  testDirectReportOperation(SensorType::GYROSCOPE, SharedMemType::GRALLOC, RateLevel::FAST,
-                            sGyroNormChecker);
+TEST_P(SensorsHidlTest, GyroscopeGrallocDirectReportOperationFast) {
+    testDirectReportOperation(SensorType::GYROSCOPE, SharedMemType::GRALLOC, RateLevel::FAST,
+                              sGyroNormChecker);
 }
 
 // Test sensor event direct report with gralloc for gyro sensor at very fast rate
-TEST_F(SensorsHidlTest, GyroscopeGrallocDirectReportOperationVeryFast) {
-  testDirectReportOperation(SensorType::GYROSCOPE, SharedMemType::GRALLOC, RateLevel::VERY_FAST,
-                            sGyroNormChecker);
+TEST_P(SensorsHidlTest, GyroscopeGrallocDirectReportOperationVeryFast) {
+    testDirectReportOperation(SensorType::GYROSCOPE, SharedMemType::GRALLOC, RateLevel::VERY_FAST,
+                              sGyroNormChecker);
 }
 
 // Test sensor event direct report with gralloc for mag sensor at normal rate
-TEST_F(SensorsHidlTest, MagnetometerGrallocDirectReportOperationNormal) {
-  testDirectReportOperation(SensorType::MAGNETIC_FIELD, SharedMemType::GRALLOC, RateLevel::NORMAL,
-                            NullChecker());
+TEST_P(SensorsHidlTest, MagnetometerGrallocDirectReportOperationNormal) {
+    testDirectReportOperation(SensorType::MAGNETIC_FIELD, SharedMemType::GRALLOC, RateLevel::NORMAL,
+                              NullChecker());
 }
 
 // Test sensor event direct report with gralloc for mag sensor at fast rate
-TEST_F(SensorsHidlTest, MagnetometerGrallocDirectReportOperationFast) {
-  testDirectReportOperation(SensorType::MAGNETIC_FIELD, SharedMemType::GRALLOC, RateLevel::FAST,
-                            NullChecker());
+TEST_P(SensorsHidlTest, MagnetometerGrallocDirectReportOperationFast) {
+    testDirectReportOperation(SensorType::MAGNETIC_FIELD, SharedMemType::GRALLOC, RateLevel::FAST,
+                              NullChecker());
 }
 
 // Test sensor event direct report with gralloc for mag sensor at very fast rate
-TEST_F(SensorsHidlTest, MagnetometerGrallocDirectReportOperationVeryFast) {
-  testDirectReportOperation(
-      SensorType::MAGNETIC_FIELD, SharedMemType::GRALLOC, RateLevel::VERY_FAST, NullChecker());
+TEST_P(SensorsHidlTest, MagnetometerGrallocDirectReportOperationVeryFast) {
+    testDirectReportOperation(SensorType::MAGNETIC_FIELD, SharedMemType::GRALLOC,
+                              RateLevel::VERY_FAST, NullChecker());
 }
 
-int main(int argc, char **argv) {
-    ::testing::AddGlobalTestEnvironment(SensorsHidlEnvironmentV1_0::Instance());
-    ::testing::InitGoogleTest(&argc, argv);
-    SensorsHidlEnvironmentV1_0::Instance()->init(&argc, argv);
-    int status = RUN_ALL_TESTS();
-    ALOGI("Test result = %d", status);
-    return status;
-}
+INSTANTIATE_TEST_SUITE_P(
+        PerInstance, SensorsHidlTest,
+        testing::ValuesIn(android::hardware::getAllHalInstanceNames(ISensors::descriptor)),
+        android::hardware::PrintInstanceNameToString);
 // vim: set ts=2 sw=2
diff --git a/sensors/2.0/vts/functional/AndroidTest.xml b/sensors/2.0/vts/functional/AndroidTest.xml
new file mode 100644
index 0000000..b710ed0
--- /dev/null
+++ b/sensors/2.0/vts/functional/AndroidTest.xml
@@ -0,0 +1,39 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2019 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+<configuration description="Runs VtsHalSensorsV2_0TargetTest.">
+    <option name="test-suite-tag" value="apct" />
+    <option name="test-suite-tag" value="apct-native" />
+
+    <target_preparer class="com.android.tradefed.targetprep.RootTargetPreparer">
+    </target_preparer>
+
+    <target_preparer class="com.android.tradefed.targetprep.RunCommandTargetPreparer">
+        <option name="run-command" value="stop"/>
+        <option name="teardown-command" value="start"/>
+    </target_preparer>
+
+    <target_preparer class="com.android.tradefed.targetprep.PushFilePreparer">
+        <option name="cleanup" value="true" />
+        <option name="push" value="VtsHalSensorsV2_0TargetTest->/data/local/tmp/VtsHalSensorsV2_0TargetTest" />
+    </target_preparer>
+
+    <test class="com.android.tradefed.testtype.GTest" >
+        <option name="native-test-timeout" value="900000" />
+        <option name="runtime-hint" value="300000"/>
+        <option name="native-test-device-path" value="/data/local/tmp" />
+        <option name="module-name" value="VtsHalSensorsV2_0TargetTest" />
+    </test>
+</configuration>
diff --git a/sensors/2.0/vts/functional/SensorsHidlEnvironmentV2_0.cpp b/sensors/2.0/vts/functional/SensorsHidlEnvironmentV2_0.cpp
index 03fcc17..2071c5a 100644
--- a/sensors/2.0/vts/functional/SensorsHidlEnvironmentV2_0.cpp
+++ b/sensors/2.0/vts/functional/SensorsHidlEnvironmentV2_0.cpp
@@ -58,8 +58,7 @@
 bool SensorsHidlEnvironmentV2_0::resetHal() {
     bool succeed = false;
     do {
-        mSensors = ISensors::getService(
-            SensorsHidlEnvironmentV2_0::Instance()->getServiceName<ISensors>());
+        mSensors = ISensors::getService(mServiceName);
         if (mSensors == nullptr) {
             break;
         }
diff --git a/sensors/2.0/vts/functional/SensorsHidlEnvironmentV2_0.h b/sensors/2.0/vts/functional/SensorsHidlEnvironmentV2_0.h
index b0dbd90..819cdd4 100644
--- a/sensors/2.0/vts/functional/SensorsHidlEnvironmentV2_0.h
+++ b/sensors/2.0/vts/functional/SensorsHidlEnvironmentV2_0.h
@@ -42,22 +42,12 @@
 class SensorsHidlEnvironmentV2_0 : public SensorsHidlEnvironmentBase {
    public:
     using Event = ::android::hardware::sensors::V1_0::Event;
-    // get the test environment singleton
-    static SensorsHidlEnvironmentV2_0* Instance() {
-        static SensorsHidlEnvironmentV2_0* instance = new SensorsHidlEnvironmentV2_0();
-        return instance;
-    }
-
-    virtual void registerTestServices() override {
-        registerTestService<android::hardware::sensors::V2_0::ISensors>();
-    }
-
     virtual void HidlTearDown() override;
 
    protected:
     friend SensorsHidlTest;
-
-    SensorsHidlEnvironmentV2_0() : mEventQueueFlag(nullptr) {}
+    SensorsHidlEnvironmentV2_0(const std::string& service_name)
+        : SensorsHidlEnvironmentBase(service_name), mEventQueueFlag(nullptr) {}
 
     /**
      * Resets the HAL with new FMQs and a new Event Flag
diff --git a/sensors/2.0/vts/functional/VtsHalSensorsV2_0TargetTest.cpp b/sensors/2.0/vts/functional/VtsHalSensorsV2_0TargetTest.cpp
index 8364ba9..c5eb442 100644
--- a/sensors/2.0/vts/functional/VtsHalSensorsV2_0TargetTest.cpp
+++ b/sensors/2.0/vts/functional/VtsHalSensorsV2_0TargetTest.cpp
@@ -20,6 +20,8 @@
 
 #include <android/hardware/sensors/2.0/ISensors.h>
 #include <android/hardware/sensors/2.0/types.h>
+#include <hidl/GtestPrinter.h>
+#include <hidl/ServiceManagement.h>
 #include <log/log.h>
 #include <utils/SystemClock.h>
 
@@ -120,10 +122,14 @@
 class SensorsHidlTest : public SensorsHidlTestBase {
   public:
     virtual void SetUp() override {
+        mEnvironment = new SensorsHidlEnvironmentV2_0(GetParam());
+        mEnvironment->HidlSetUp();
         // Ensure that we have a valid environment before performing tests
         ASSERT_NE(getSensors(), nullptr);
     }
 
+    virtual void TearDown() override { mEnvironment->HidlTearDown(); }
+
   protected:
     SensorInfo defaultSensorByType(SensorType type) override;
     std::vector<SensorInfo> getSensorsList();
@@ -160,12 +166,10 @@
     }
 
     inline sp<::android::hardware::sensors::V2_0::ISensors>& getSensors() {
-        return SensorsHidlEnvironmentV2_0::Instance()->mSensors;
+        return mEnvironment->mSensors;
     }
 
-    SensorsHidlEnvironmentBase* getEnvironment() override {
-        return SensorsHidlEnvironmentV2_0::Instance();
-    }
+    SensorsHidlEnvironmentBase* getEnvironment() override { return mEnvironment; }
 
     // Test helpers
     void runSingleFlushTest(const std::vector<SensorInfo>& sensors, bool activateSensor,
@@ -191,6 +195,10 @@
     void checkRateLevel(const SensorInfo& sensor, int32_t directChannelHandle, RateLevel rateLevel);
     void queryDirectChannelSupport(SharedMemType memType, bool* supportsSharedMemType,
                                    bool* supportsAnyDirectChannel);
+
+  private:
+    // Test environment for sensors HAL.
+    SensorsHidlEnvironmentV2_0* mEnvironment;
 };
 
 Return<Result> SensorsHidlTest::activate(int32_t sensorHandle, bool enabled) {
@@ -301,7 +309,7 @@
 }
 
 // Test if sensor list returned is valid
-TEST_F(SensorsHidlTest, SensorListValid) {
+TEST_P(SensorsHidlTest, SensorListValid) {
     getSensors()->getSensorsList([&](const auto& list) {
         const size_t count = list.size();
         for (size_t i = 0; i < count; ++i) {
@@ -346,7 +354,7 @@
 }
 
 // Test that SetOperationMode returns the expected value
-TEST_F(SensorsHidlTest, SetOperationMode) {
+TEST_P(SensorsHidlTest, SetOperationMode) {
     std::vector<SensorInfo> sensors = getInjectEventSensors();
     if (getInjectEventSensors().size() > 0) {
         ASSERT_EQ(Result::OK, getSensors()->setOperationMode(OperationMode::NORMAL));
@@ -358,7 +366,7 @@
 }
 
 // Test that an injected event is written back to the Event FMQ
-TEST_F(SensorsHidlTest, InjectSensorEventData) {
+TEST_P(SensorsHidlTest, InjectSensorEventData) {
     std::vector<SensorInfo> sensors = getInjectEventSensors();
     if (sensors.size() == 0) {
         return;
@@ -414,196 +422,196 @@
 }
 
 // Test if sensor hal can do UI speed accelerometer streaming properly
-TEST_F(SensorsHidlTest, AccelerometerStreamingOperationSlow) {
+TEST_P(SensorsHidlTest, AccelerometerStreamingOperationSlow) {
     testStreamingOperation(SensorType::ACCELEROMETER, std::chrono::milliseconds(200),
                            std::chrono::seconds(5), sAccelNormChecker);
 }
 
 // Test if sensor hal can do normal speed accelerometer streaming properly
-TEST_F(SensorsHidlTest, AccelerometerStreamingOperationNormal) {
+TEST_P(SensorsHidlTest, AccelerometerStreamingOperationNormal) {
     testStreamingOperation(SensorType::ACCELEROMETER, std::chrono::milliseconds(20),
                            std::chrono::seconds(5), sAccelNormChecker);
 }
 
 // Test if sensor hal can do game speed accelerometer streaming properly
-TEST_F(SensorsHidlTest, AccelerometerStreamingOperationFast) {
+TEST_P(SensorsHidlTest, AccelerometerStreamingOperationFast) {
     testStreamingOperation(SensorType::ACCELEROMETER, std::chrono::milliseconds(5),
                            std::chrono::seconds(5), sAccelNormChecker);
 }
 
 // Test if sensor hal can do UI speed gyroscope streaming properly
-TEST_F(SensorsHidlTest, GyroscopeStreamingOperationSlow) {
+TEST_P(SensorsHidlTest, GyroscopeStreamingOperationSlow) {
     testStreamingOperation(SensorType::GYROSCOPE, std::chrono::milliseconds(200),
                            std::chrono::seconds(5), sGyroNormChecker);
 }
 
 // Test if sensor hal can do normal speed gyroscope streaming properly
-TEST_F(SensorsHidlTest, GyroscopeStreamingOperationNormal) {
+TEST_P(SensorsHidlTest, GyroscopeStreamingOperationNormal) {
     testStreamingOperation(SensorType::GYROSCOPE, std::chrono::milliseconds(20),
                            std::chrono::seconds(5), sGyroNormChecker);
 }
 
 // Test if sensor hal can do game speed gyroscope streaming properly
-TEST_F(SensorsHidlTest, GyroscopeStreamingOperationFast) {
+TEST_P(SensorsHidlTest, GyroscopeStreamingOperationFast) {
     testStreamingOperation(SensorType::GYROSCOPE, std::chrono::milliseconds(5),
                            std::chrono::seconds(5), sGyroNormChecker);
 }
 
 // Test if sensor hal can do UI speed magnetometer streaming properly
-TEST_F(SensorsHidlTest, MagnetometerStreamingOperationSlow) {
+TEST_P(SensorsHidlTest, MagnetometerStreamingOperationSlow) {
     testStreamingOperation(SensorType::MAGNETIC_FIELD, std::chrono::milliseconds(200),
                            std::chrono::seconds(5), NullChecker());
 }
 
 // Test if sensor hal can do normal speed magnetometer streaming properly
-TEST_F(SensorsHidlTest, MagnetometerStreamingOperationNormal) {
+TEST_P(SensorsHidlTest, MagnetometerStreamingOperationNormal) {
     testStreamingOperation(SensorType::MAGNETIC_FIELD, std::chrono::milliseconds(20),
                            std::chrono::seconds(5), NullChecker());
 }
 
 // Test if sensor hal can do game speed magnetometer streaming properly
-TEST_F(SensorsHidlTest, MagnetometerStreamingOperationFast) {
+TEST_P(SensorsHidlTest, MagnetometerStreamingOperationFast) {
     testStreamingOperation(SensorType::MAGNETIC_FIELD, std::chrono::milliseconds(5),
                            std::chrono::seconds(5), NullChecker());
 }
 
 // Test if sensor hal can do accelerometer sampling rate switch properly when sensor is active
-TEST_F(SensorsHidlTest, AccelerometerSamplingPeriodHotSwitchOperation) {
+TEST_P(SensorsHidlTest, AccelerometerSamplingPeriodHotSwitchOperation) {
     testSamplingRateHotSwitchOperation(SensorType::ACCELEROMETER);
     testSamplingRateHotSwitchOperation(SensorType::ACCELEROMETER, false /*fastToSlow*/);
 }
 
 // Test if sensor hal can do gyroscope sampling rate switch properly when sensor is active
-TEST_F(SensorsHidlTest, GyroscopeSamplingPeriodHotSwitchOperation) {
+TEST_P(SensorsHidlTest, GyroscopeSamplingPeriodHotSwitchOperation) {
     testSamplingRateHotSwitchOperation(SensorType::GYROSCOPE);
     testSamplingRateHotSwitchOperation(SensorType::GYROSCOPE, false /*fastToSlow*/);
 }
 
 // Test if sensor hal can do magnetometer sampling rate switch properly when sensor is active
-TEST_F(SensorsHidlTest, MagnetometerSamplingPeriodHotSwitchOperation) {
+TEST_P(SensorsHidlTest, MagnetometerSamplingPeriodHotSwitchOperation) {
     testSamplingRateHotSwitchOperation(SensorType::MAGNETIC_FIELD);
     testSamplingRateHotSwitchOperation(SensorType::MAGNETIC_FIELD, false /*fastToSlow*/);
 }
 
 // Test if sensor hal can do accelerometer batching properly
-TEST_F(SensorsHidlTest, AccelerometerBatchingOperation) {
+TEST_P(SensorsHidlTest, AccelerometerBatchingOperation) {
     testBatchingOperation(SensorType::ACCELEROMETER);
 }
 
 // Test if sensor hal can do gyroscope batching properly
-TEST_F(SensorsHidlTest, GyroscopeBatchingOperation) {
+TEST_P(SensorsHidlTest, GyroscopeBatchingOperation) {
     testBatchingOperation(SensorType::GYROSCOPE);
 }
 
 // Test if sensor hal can do magnetometer batching properly
-TEST_F(SensorsHidlTest, MagnetometerBatchingOperation) {
+TEST_P(SensorsHidlTest, MagnetometerBatchingOperation) {
     testBatchingOperation(SensorType::MAGNETIC_FIELD);
 }
 
 // Test sensor event direct report with ashmem for accel sensor at normal rate
-TEST_F(SensorsHidlTest, AccelerometerAshmemDirectReportOperationNormal) {
+TEST_P(SensorsHidlTest, AccelerometerAshmemDirectReportOperationNormal) {
     testDirectReportOperation(SensorType::ACCELEROMETER, SharedMemType::ASHMEM, RateLevel::NORMAL,
                               sAccelNormChecker);
 }
 
 // Test sensor event direct report with ashmem for accel sensor at fast rate
-TEST_F(SensorsHidlTest, AccelerometerAshmemDirectReportOperationFast) {
+TEST_P(SensorsHidlTest, AccelerometerAshmemDirectReportOperationFast) {
     testDirectReportOperation(SensorType::ACCELEROMETER, SharedMemType::ASHMEM, RateLevel::FAST,
                               sAccelNormChecker);
 }
 
 // Test sensor event direct report with ashmem for accel sensor at very fast rate
-TEST_F(SensorsHidlTest, AccelerometerAshmemDirectReportOperationVeryFast) {
+TEST_P(SensorsHidlTest, AccelerometerAshmemDirectReportOperationVeryFast) {
     testDirectReportOperation(SensorType::ACCELEROMETER, SharedMemType::ASHMEM,
                               RateLevel::VERY_FAST, sAccelNormChecker);
 }
 
 // Test sensor event direct report with ashmem for gyro sensor at normal rate
-TEST_F(SensorsHidlTest, GyroscopeAshmemDirectReportOperationNormal) {
+TEST_P(SensorsHidlTest, GyroscopeAshmemDirectReportOperationNormal) {
     testDirectReportOperation(SensorType::GYROSCOPE, SharedMemType::ASHMEM, RateLevel::NORMAL,
                               sGyroNormChecker);
 }
 
 // Test sensor event direct report with ashmem for gyro sensor at fast rate
-TEST_F(SensorsHidlTest, GyroscopeAshmemDirectReportOperationFast) {
+TEST_P(SensorsHidlTest, GyroscopeAshmemDirectReportOperationFast) {
     testDirectReportOperation(SensorType::GYROSCOPE, SharedMemType::ASHMEM, RateLevel::FAST,
                               sGyroNormChecker);
 }
 
 // Test sensor event direct report with ashmem for gyro sensor at very fast rate
-TEST_F(SensorsHidlTest, GyroscopeAshmemDirectReportOperationVeryFast) {
+TEST_P(SensorsHidlTest, GyroscopeAshmemDirectReportOperationVeryFast) {
     testDirectReportOperation(SensorType::GYROSCOPE, SharedMemType::ASHMEM, RateLevel::VERY_FAST,
                               sGyroNormChecker);
 }
 
 // Test sensor event direct report with ashmem for mag sensor at normal rate
-TEST_F(SensorsHidlTest, MagnetometerAshmemDirectReportOperationNormal) {
+TEST_P(SensorsHidlTest, MagnetometerAshmemDirectReportOperationNormal) {
     testDirectReportOperation(SensorType::MAGNETIC_FIELD, SharedMemType::ASHMEM, RateLevel::NORMAL,
                               NullChecker());
 }
 
 // Test sensor event direct report with ashmem for mag sensor at fast rate
-TEST_F(SensorsHidlTest, MagnetometerAshmemDirectReportOperationFast) {
+TEST_P(SensorsHidlTest, MagnetometerAshmemDirectReportOperationFast) {
     testDirectReportOperation(SensorType::MAGNETIC_FIELD, SharedMemType::ASHMEM, RateLevel::FAST,
                               NullChecker());
 }
 
 // Test sensor event direct report with ashmem for mag sensor at very fast rate
-TEST_F(SensorsHidlTest, MagnetometerAshmemDirectReportOperationVeryFast) {
+TEST_P(SensorsHidlTest, MagnetometerAshmemDirectReportOperationVeryFast) {
     testDirectReportOperation(SensorType::MAGNETIC_FIELD, SharedMemType::ASHMEM,
                               RateLevel::VERY_FAST, NullChecker());
 }
 
 // Test sensor event direct report with gralloc for accel sensor at normal rate
-TEST_F(SensorsHidlTest, AccelerometerGrallocDirectReportOperationNormal) {
+TEST_P(SensorsHidlTest, AccelerometerGrallocDirectReportOperationNormal) {
     testDirectReportOperation(SensorType::ACCELEROMETER, SharedMemType::GRALLOC, RateLevel::NORMAL,
                               sAccelNormChecker);
 }
 
 // Test sensor event direct report with gralloc for accel sensor at fast rate
-TEST_F(SensorsHidlTest, AccelerometerGrallocDirectReportOperationFast) {
+TEST_P(SensorsHidlTest, AccelerometerGrallocDirectReportOperationFast) {
     testDirectReportOperation(SensorType::ACCELEROMETER, SharedMemType::GRALLOC, RateLevel::FAST,
                               sAccelNormChecker);
 }
 
 // Test sensor event direct report with gralloc for accel sensor at very fast rate
-TEST_F(SensorsHidlTest, AccelerometerGrallocDirectReportOperationVeryFast) {
+TEST_P(SensorsHidlTest, AccelerometerGrallocDirectReportOperationVeryFast) {
     testDirectReportOperation(SensorType::ACCELEROMETER, SharedMemType::GRALLOC,
                               RateLevel::VERY_FAST, sAccelNormChecker);
 }
 
 // Test sensor event direct report with gralloc for gyro sensor at normal rate
-TEST_F(SensorsHidlTest, GyroscopeGrallocDirectReportOperationNormal) {
+TEST_P(SensorsHidlTest, GyroscopeGrallocDirectReportOperationNormal) {
     testDirectReportOperation(SensorType::GYROSCOPE, SharedMemType::GRALLOC, RateLevel::NORMAL,
                               sGyroNormChecker);
 }
 
 // Test sensor event direct report with gralloc for gyro sensor at fast rate
-TEST_F(SensorsHidlTest, GyroscopeGrallocDirectReportOperationFast) {
+TEST_P(SensorsHidlTest, GyroscopeGrallocDirectReportOperationFast) {
     testDirectReportOperation(SensorType::GYROSCOPE, SharedMemType::GRALLOC, RateLevel::FAST,
                               sGyroNormChecker);
 }
 
 // Test sensor event direct report with gralloc for gyro sensor at very fast rate
-TEST_F(SensorsHidlTest, GyroscopeGrallocDirectReportOperationVeryFast) {
+TEST_P(SensorsHidlTest, GyroscopeGrallocDirectReportOperationVeryFast) {
     testDirectReportOperation(SensorType::GYROSCOPE, SharedMemType::GRALLOC, RateLevel::VERY_FAST,
                               sGyroNormChecker);
 }
 
 // Test sensor event direct report with gralloc for mag sensor at normal rate
-TEST_F(SensorsHidlTest, MagnetometerGrallocDirectReportOperationNormal) {
+TEST_P(SensorsHidlTest, MagnetometerGrallocDirectReportOperationNormal) {
     testDirectReportOperation(SensorType::MAGNETIC_FIELD, SharedMemType::GRALLOC, RateLevel::NORMAL,
                               NullChecker());
 }
 
 // Test sensor event direct report with gralloc for mag sensor at fast rate
-TEST_F(SensorsHidlTest, MagnetometerGrallocDirectReportOperationFast) {
+TEST_P(SensorsHidlTest, MagnetometerGrallocDirectReportOperationFast) {
     testDirectReportOperation(SensorType::MAGNETIC_FIELD, SharedMemType::GRALLOC, RateLevel::FAST,
                               NullChecker());
 }
 
 // Test sensor event direct report with gralloc for mag sensor at very fast rate
-TEST_F(SensorsHidlTest, MagnetometerGrallocDirectReportOperationVeryFast) {
+TEST_P(SensorsHidlTest, MagnetometerGrallocDirectReportOperationVeryFast) {
     testDirectReportOperation(SensorType::MAGNETIC_FIELD, SharedMemType::GRALLOC,
                               RateLevel::VERY_FAST, NullChecker());
 }
@@ -619,9 +627,13 @@
 
 // Test that if initialize is called twice, then the HAL writes events to the FMQs from the second
 // call to the function.
-TEST_F(SensorsHidlTest, CallInitializeTwice) {
+TEST_P(SensorsHidlTest, CallInitializeTwice) {
     // Create a helper class so that a second environment is able to be instantiated
-    class SensorsHidlEnvironmentTest : public SensorsHidlEnvironmentV2_0 {};
+    class SensorsHidlEnvironmentTest : public SensorsHidlEnvironmentV2_0 {
+      public:
+        SensorsHidlEnvironmentTest(const std::string& service_name)
+            : SensorsHidlEnvironmentV2_0(service_name) {}
+    };
 
     if (getSensorsList().size() == 0) {
         // No sensors
@@ -633,7 +645,7 @@
 
     // Create a new environment that calls initialize()
     std::unique_ptr<SensorsHidlEnvironmentTest> newEnv =
-        std::make_unique<SensorsHidlEnvironmentTest>();
+            std::make_unique<SensorsHidlEnvironmentTest>(GetParam());
     newEnv->HidlSetUp();
     if (HasFatalFailure()) {
         return;  // Exit early if setting up the new environment failed
@@ -662,7 +674,7 @@
     activateAllSensors(false);
 }
 
-TEST_F(SensorsHidlTest, CleanupConnectionsOnInitialize) {
+TEST_P(SensorsHidlTest, CleanupConnectionsOnInitialize) {
     activateAllSensors(true);
 
     // Verify that events are received
@@ -731,7 +743,7 @@
     }
 }
 
-TEST_F(SensorsHidlTest, FlushSensor) {
+TEST_P(SensorsHidlTest, FlushSensor) {
     // Find a sensor that is not a one-shot sensor
     std::vector<SensorInfo> sensors = getNonOneShotSensors();
     if (sensors.size() == 0) {
@@ -743,7 +755,7 @@
     runFlushTest(sensors, true /* activateSensor */, kFlushes, kFlushes, Result::OK);
 }
 
-TEST_F(SensorsHidlTest, FlushOneShotSensor) {
+TEST_P(SensorsHidlTest, FlushOneShotSensor) {
     // Find a sensor that is a one-shot sensor
     std::vector<SensorInfo> sensors = getOneShotSensors();
     if (sensors.size() == 0) {
@@ -754,7 +766,7 @@
                        Result::BAD_VALUE);
 }
 
-TEST_F(SensorsHidlTest, FlushInactiveSensor) {
+TEST_P(SensorsHidlTest, FlushInactiveSensor) {
     // Attempt to find a non-one shot sensor, then a one-shot sensor if necessary
     std::vector<SensorInfo> sensors = getNonOneShotSensors();
     if (sensors.size() == 0) {
@@ -768,7 +780,7 @@
                        Result::BAD_VALUE);
 }
 
-TEST_F(SensorsHidlTest, FlushNonexistentSensor) {
+TEST_P(SensorsHidlTest, FlushNonexistentSensor) {
     SensorInfo sensor;
     std::vector<SensorInfo> sensors = getNonOneShotSensors();
     if (sensors.size() == 0) {
@@ -783,7 +795,7 @@
                        0 /* expectedFlushCount */, Result::BAD_VALUE);
 }
 
-TEST_F(SensorsHidlTest, Batch) {
+TEST_P(SensorsHidlTest, Batch) {
     if (getSensorsList().size() == 0) {
         return;
     }
@@ -815,7 +827,7 @@
               Result::BAD_VALUE);
 }
 
-TEST_F(SensorsHidlTest, Activate) {
+TEST_P(SensorsHidlTest, Activate) {
     if (getSensorsList().size() == 0) {
         return;
     }
@@ -841,7 +853,7 @@
     ASSERT_EQ(activate(invalidHandle, false), Result::BAD_VALUE);
 }
 
-TEST_F(SensorsHidlTest, NoStaleEvents) {
+TEST_P(SensorsHidlTest, NoStaleEvents) {
     constexpr milliseconds kFiveHundredMs(500);
     constexpr milliseconds kOneSecond(1000);
 
@@ -1021,11 +1033,11 @@
     }
 }
 
-TEST_F(SensorsHidlTest, DirectChannelAshmem) {
+TEST_P(SensorsHidlTest, DirectChannelAshmem) {
     verifyDirectChannel(SharedMemType::ASHMEM);
 }
 
-TEST_F(SensorsHidlTest, DirectChannelGralloc) {
+TEST_P(SensorsHidlTest, DirectChannelGralloc) {
     verifyDirectChannel(SharedMemType::GRALLOC);
 }
 
@@ -1064,7 +1076,7 @@
     return found;
 }
 
-TEST_F(SensorsHidlTest, ConfigureDirectChannelWithInvalidHandle) {
+TEST_P(SensorsHidlTest, ConfigureDirectChannelWithInvalidHandle) {
     SensorInfo sensor;
     SharedMemType memType;
     RateLevel rate;
@@ -1078,7 +1090,7 @@
     });
 }
 
-TEST_F(SensorsHidlTest, CleanupDirectConnectionOnInitialize) {
+TEST_P(SensorsHidlTest, CleanupDirectConnectionOnInitialize) {
     constexpr size_t kNumEvents = 1;
     constexpr size_t kMemSize = kNumEvents * kEventSize;
 
@@ -1124,12 +1136,8 @@
     mDirectChannelHandles = handles;
 }
 
-int main(int argc, char** argv) {
-    ::testing::AddGlobalTestEnvironment(SensorsHidlEnvironmentV2_0::Instance());
-    ::testing::InitGoogleTest(&argc, argv);
-    SensorsHidlEnvironmentV2_0::Instance()->init(&argc, argv);
-    int status = RUN_ALL_TESTS();
-    ALOGI("Test result = %d", status);
-    return status;
-}
+INSTANTIATE_TEST_SUITE_P(PerInstance, SensorsHidlTest,
+                         testing::ValuesIn(android::hardware::getAllHalInstanceNames(
+                                 android::hardware::sensors::V2_0::ISensors::descriptor)),
+                         android::hardware::PrintInstanceNameToString);
 // vim: set ts=2 sw=2
diff --git a/sensors/common/vts/utils/Android.bp b/sensors/common/vts/utils/Android.bp
index 02dc608..bb4d329 100644
--- a/sensors/common/vts/utils/Android.bp
+++ b/sensors/common/vts/utils/Android.bp
@@ -16,6 +16,7 @@
 
 cc_library_static {
     name: "VtsHalSensorsTargetTestUtils",
+    defaults: ["VtsHalTargetTestDefaults"],
     cflags: ["-DLOG_TAG=\"sensors_hidl_hal_test\""],
     srcs: [
         "GrallocWrapper.cpp",
@@ -36,6 +37,5 @@
         "android.hardware.graphics.mapper@2.1",
         "android.hardware.graphics.mapper@3.0",
         "android.hardware.sensors@1.0",
-        "VtsHalHidlTargetTestBase",
     ],
 }
diff --git a/sensors/common/vts/utils/include/sensors-vts-utils/SensorsHidlEnvironmentBase.h b/sensors/common/vts/utils/include/sensors-vts-utils/SensorsHidlEnvironmentBase.h
index 6499fba..dbc9392 100644
--- a/sensors/common/vts/utils/include/sensors-vts-utils/SensorsHidlEnvironmentBase.h
+++ b/sensors/common/vts/utils/include/sensors-vts-utils/SensorsHidlEnvironmentBase.h
@@ -17,9 +17,8 @@
 #ifndef ANDROID_SENSORS_HIDL_ENVIRONMENT_BASE_H
 #define ANDROID_SENSORS_HIDL_ENVIRONMENT_BASE_H
 
-#include <VtsHalHidlTargetTestEnvBase.h>
-
 #include <android/hardware/sensors/1.0/types.h>
+#include <gtest/gtest.h>
 
 #include <atomic>
 #include <memory>
@@ -33,11 +32,11 @@
     virtual void onEvent(const ::android::hardware::sensors::V1_0::Event& event) = 0;
 };
 
-class SensorsHidlEnvironmentBase : public ::testing::VtsHalHidlTargetTestEnvBase {
-   public:
+class SensorsHidlEnvironmentBase {
+  public:
     using Event = ::android::hardware::sensors::V1_0::Event;
-    virtual void HidlSetUp() override;
-    virtual void HidlTearDown() override;
+    virtual void HidlSetUp();
+    virtual void HidlTearDown();
 
     // Get and clear all events collected so far (like "cat" shell command).
     // If output is nullptr, it clears all collected events.
@@ -50,22 +49,27 @@
     void unregisterCallback();
 
    protected:
-    SensorsHidlEnvironmentBase() : mCollectionEnabled(false), mCallback(nullptr) {}
+     SensorsHidlEnvironmentBase(const std::string& service_name)
+         : mCollectionEnabled(false), mCallback(nullptr) {
+         mServiceName = service_name;
+     }
+     virtual ~SensorsHidlEnvironmentBase(){};
 
-    void addEvent(const Event& ev);
+     void addEvent(const Event& ev);
 
-    virtual void startPollingThread() = 0;
-    virtual bool resetHal() = 0;
+     virtual void startPollingThread() = 0;
+     virtual bool resetHal() = 0;
 
-    bool mCollectionEnabled;
-    std::atomic_bool mStopThread;
-    std::thread mPollThread;
-    std::vector<Event> mEvents;
-    std::mutex mEventsMutex;
+     std::string mServiceName;
+     bool mCollectionEnabled;
+     std::atomic_bool mStopThread;
+     std::thread mPollThread;
+     std::vector<Event> mEvents;
+     std::mutex mEventsMutex;
 
-    IEventCallback* mCallback;
+     IEventCallback* mCallback;
 
-    GTEST_DISALLOW_COPY_AND_ASSIGN_(SensorsHidlEnvironmentBase);
+     GTEST_DISALLOW_COPY_AND_ASSIGN_(SensorsHidlEnvironmentBase);
 };
 
 #endif  // ANDROID_SENSORS_HIDL_ENVIRONMENT_BASE_H
\ No newline at end of file
diff --git a/sensors/common/vts/utils/include/sensors-vts-utils/SensorsHidlTestBase.h b/sensors/common/vts/utils/include/sensors-vts-utils/SensorsHidlTestBase.h
index 6fd9a2b..5fb6c5c 100644
--- a/sensors/common/vts/utils/include/sensors-vts-utils/SensorsHidlTestBase.h
+++ b/sensors/common/vts/utils/include/sensors-vts-utils/SensorsHidlTestBase.h
@@ -23,6 +23,7 @@
 #include <VtsHalHidlTargetTestBase.h>
 #include <android/hardware/sensors/1.0/ISensors.h>
 #include <android/hardware/sensors/1.0/types.h>
+#include <gtest/gtest.h>
 
 #include <unordered_set>
 #include <vector>
@@ -44,8 +45,8 @@
 using ::android::hardware::sensors::V1_0::SharedMemInfo;
 using ::android::hardware::sensors::V1_0::SharedMemType;
 
-class SensorsHidlTestBase : public ::testing::VtsHalHidlTargetTestBase {
-   public:
+class SensorsHidlTestBase : public testing::TestWithParam<std::string> {
+  public:
     virtual SensorsHidlEnvironmentBase* getEnvironment() = 0;
     virtual void SetUp() override {}
 
diff --git a/vibrator/aidl/vts/VtsHalVibratorTargetTest.cpp b/vibrator/aidl/vts/VtsHalVibratorTargetTest.cpp
index 5c6120b..6f9ba1a 100644
--- a/vibrator/aidl/vts/VtsHalVibratorTargetTest.cpp
+++ b/vibrator/aidl/vts/VtsHalVibratorTargetTest.cpp
@@ -135,13 +135,12 @@
             Status status = vibrator->perform(effect, strength, nullptr /*callback*/, &lengthMs);
 
             if (isEffectSupported) {
-                EXPECT_TRUE(status.isOk())
-                        << static_cast<int>(effect) << " " << static_cast<int>(strength);
+                EXPECT_TRUE(status.isOk()) << toString(effect) << " " << toString(strength);
                 EXPECT_GT(lengthMs, 0);
                 usleep(lengthMs * 1000);
             } else {
                 EXPECT_EQ(status.exceptionCode(), Status::EX_UNSUPPORTED_OPERATION)
-                        << static_cast<int>(effect) << " " << static_cast<int>(strength);
+                        << toString(effect) << " " << toString(strength);
                 EXPECT_EQ(lengthMs, 0);
             }
         }
@@ -202,7 +201,7 @@
             int32_t lengthMs;
             Status status = vibrator->perform(effect, strength, nullptr /*callback*/, &lengthMs);
             EXPECT_EQ(status.exceptionCode(), Status::EX_UNSUPPORTED_OPERATION)
-                    << static_cast<int>(effect) << " " << static_cast<int>(strength);
+                    << toString(effect) << " " << toString(strength);
         }
     }
     for (Effect effect : kEffects) {
@@ -210,7 +209,7 @@
             int32_t lengthMs;
             Status status = vibrator->perform(effect, strength, nullptr /*callback*/, &lengthMs);
             EXPECT_EQ(status.exceptionCode(), Status::EX_UNSUPPORTED_OPERATION)
-                    << static_cast<int>(effect) << " " << static_cast<int>(strength);
+                    << toString(effect) << " " << toString(strength);
         }
     }
 }