diff --git a/audio/aidl/android/hardware/audio/effect/Visualizer.aidl b/audio/aidl/android/hardware/audio/effect/Visualizer.aidl
index 0b37546..fe8fe97 100644
--- a/audio/aidl/android/hardware/audio/effect/Visualizer.aidl
+++ b/audio/aidl/android/hardware/audio/effect/Visualizer.aidl
@@ -20,10 +20,12 @@
 
 /**
  * Visualizer specific definitions. Visualizer enables application to retrieve part of the currently
- * playing audio for visualization purpose
+ * playing audio for visualization purpose. The output is identical to the input, while
+ * visualization data is generated separately based on scalingMode and captureSamples parameter
+ * values.
  *
  * All parameter settings must be inside the range of Capability.Range.visualizer definition if the
- * definition for the corresponding parameter tag exist. See more detals about Range in Range.aidl.
+ * definition for the corresponding parameter tag exist. See more details about Range in Range.aidl.
  *
  */
 @VintfStability
@@ -50,14 +52,24 @@
     enum ScalingMode {
         /**
          * Defines a capture mode where amplification is applied based on the content of the
-         * captured data. This is the default Visualizer mode, and is suitable for music
-         * visualization.
+         * captured data in order to normalize it to the unsigned 8 bit sample range. This is the
+         * default Visualizer mode, and is suitable for music visualization.
+         *
+         * For example,
+         * Input Range:[-0.5, 0.5] -> Visualization Data Range:[0, 255]
+         * Input Range:[-1,1]      -> Visualization Data Range:[0, 255]
+         *
          */
         NORMALIZED = 0,
         /**
-         * Defines a capture mode where the playback volume will affect (scale) the range of the
-         * captured data. A low playback volume will lead to low sample and fft values, and
-         * vice-versa.
+         * Defines a capture mode where no additional scaling is done on the input audio data thus
+         * the visualization data remains as close as possible to the input. The visualization
+         * directly reflects the actual loudness and waveform shape, rather than fitting everything
+         * into a normalized visual range.
+         *
+         * For example,
+         * Input Range:[-0.5, 0.5] -> Visualization Data Range:[64, 192]
+         * Input Range:[-1,1]      -> Visualization Data Range:[0, 255]
          */
         AS_PLAYED,
     }
@@ -93,7 +105,10 @@
     Measurement measurement;
 
     /**
-     * Get only parameter to get the latest captured samples of PCM samples (8 bits per sample).
+     * Get only parameter to get the latest captured samples of PCM samples (8 bits per sample). It
+     * represents the visualization data. The capture is intended for passing to applications, and
+     * it contains the same audio data as the input, but with intentionally lower sample resolution,
+     * and optionally normalized, depending on the scalingMode.
      */
     byte[] captureSampleBuffer;
 
diff --git a/audio/aidl/vts/EffectHelper.h b/audio/aidl/vts/EffectHelper.h
index 8ceb56b..754a08f 100644
--- a/audio/aidl/vts/EffectHelper.h
+++ b/audio/aidl/vts/EffectHelper.h
@@ -85,7 +85,9 @@
 }
 
 static constexpr float kMaxAudioSampleValue = 1;
+static constexpr int kNPointFFT = 16384;
 static constexpr int kSamplingFrequency = 44100;
+static constexpr int kDefaultChannelLayout = AudioChannelLayout::LAYOUT_STEREO;
 
 class EffectHelper {
   public:
@@ -259,13 +261,14 @@
         EXPECT_TRUE(efState & kEventFlagDataMqUpdate);
     }
 
-    Parameter::Common createParamCommon(int session = 0, int ioHandle = -1, int iSampleRate = 48000,
-                                        int oSampleRate = 48000, long iFrameCount = 0x100,
-                                        long oFrameCount = 0x100) {
-        AudioChannelLayout inputLayout = AudioChannelLayout::make<AudioChannelLayout::layoutMask>(
-                AudioChannelLayout::LAYOUT_STEREO);
-        AudioChannelLayout outputLayout = inputLayout;
-
+    Parameter::Common createParamCommon(
+            int session = 0, int ioHandle = -1, int iSampleRate = 48000, int oSampleRate = 48000,
+            long iFrameCount = 0x100, long oFrameCount = 0x100,
+            AudioChannelLayout inputChannelLayout =
+                    AudioChannelLayout::make<AudioChannelLayout::layoutMask>(kDefaultChannelLayout),
+            AudioChannelLayout outputChannelLayout =
+                    AudioChannelLayout::make<AudioChannelLayout::layoutMask>(
+                            kDefaultChannelLayout)) {
         // query supported input layout and use it as the default parameter in common
         if (mIsSpatializer && isRangeValid<Range::spatializer>(Spatializer::supportedChannelLayout,
                                                                mDescriptor.capability)) {
@@ -275,18 +278,10 @@
                 layoutRange &&
                 0 != (layouts = layoutRange->min.get<Spatializer::supportedChannelLayout>())
                                 .size()) {
-                inputLayout = layouts[0];
+                inputChannelLayout = layouts[0];
             }
         }
 
-        return createParamCommon(session, ioHandle, iSampleRate, oSampleRate, iFrameCount,
-                                 oFrameCount, inputLayout, outputLayout);
-    }
-
-    static Parameter::Common createParamCommon(int session, int ioHandle, int iSampleRate,
-                                               int oSampleRate, long iFrameCount, long oFrameCount,
-                                               AudioChannelLayout inputChannelLayout,
-                                               AudioChannelLayout outputChannelLayout) {
         Parameter::Common common;
         common.session = session;
         common.ioHandle = ioHandle;
@@ -463,43 +458,120 @@
 
     // Generate multitone input between -amplitude to +amplitude using testFrequencies
     // All test frequencies are considered having the same amplitude
+    // The function supports only mono and stereo channel layout
     void generateSineWave(const std::vector<int>& testFrequencies, std::vector<float>& input,
                           const float amplitude = 1.0,
-                          const int samplingFrequency = kSamplingFrequency) {
-        for (size_t i = 0; i < input.size(); i++) {
+                          const int samplingFrequency = kSamplingFrequency,
+                          int channelLayout = AudioChannelLayout::LAYOUT_STEREO) {
+        bool isStereo = (channelLayout == AudioChannelLayout::LAYOUT_STEREO);
+        if (isStereo) {
+            ASSERT_EQ(input.size() % 2, 0u)
+                    << "In case of stereo input, the input size value must be even";
+        }
+        for (size_t i = 0; i < input.size(); i += (isStereo ? 2 : 1)) {
             input[i] = 0;
 
             for (size_t j = 0; j < testFrequencies.size(); j++) {
-                input[i] += sin(2 * M_PI * testFrequencies[j] * i / samplingFrequency);
+                input[i] += sin(2 * M_PI * testFrequencies[j] * (i / (isStereo ? 2 : 1)) /
+                                samplingFrequency);
             }
             input[i] *= amplitude / testFrequencies.size();
+
+            if (isStereo) {
+                input[i + 1] = input[i];
+            }
         }
     }
 
     // Generate single tone input between -amplitude to +amplitude using testFrequency
+    // The function supports only mono and stereo channel layout
     void generateSineWave(const int testFrequency, std::vector<float>& input,
                           const float amplitude = 1.0,
-                          const int samplingFrequency = kSamplingFrequency) {
-        generateSineWave(std::vector<int>{testFrequency}, input, amplitude, samplingFrequency);
+                          const int samplingFrequency = kSamplingFrequency,
+                          int channelLayout = AudioChannelLayout::LAYOUT_STEREO) {
+        ASSERT_NO_FATAL_FAILURE(generateSineWave(std::vector<int>{testFrequency}, input, amplitude,
+                                                 samplingFrequency, channelLayout));
+    }
+
+    // PFFFT only supports transforms for inputs of length N of the form N = (2^a)*(3^b)*(5^c) where
+    // a >= 5, b >=0, c >= 0.
+    constexpr bool isFftInputSizeValid(size_t n) {
+        if (n == 0 || n & 0b11111) {
+            return false;
+        }
+        for (const int factor : {2, 3, 5}) {
+            while (n % factor == 0) {
+                n /= factor;
+            }
+        }
+        return n == 1;
     }
 
     // Use FFT transform to convert the buffer to frequency domain
     // Compute its magnitude at binOffsets
-    std::vector<float> calculateMagnitude(const std::vector<float>& buffer,
-                                          const std::vector<int>& binOffsets, const int nPointFFT) {
+    void calculateMagnitudeMono(std::vector<float>& bufferMag,       // Output parameter
+                                const std::vector<float>& buffer,    // Input parameter
+                                const std::vector<int>& binOffsets,  // Input parameter
+                                const int nPointFFT = kNPointFFT) {  // Input parameter
+        ASSERT_TRUE(isFftInputSizeValid(nPointFFT))
+                << "PFFFT only supports transforms for inputs of length N of the form N = (2 ^ a) "
+                   "* (3 ^ b) * (5 ^ c) where a >= 5, b >= 0, c >= 0. ";
+        ASSERT_GE((int)buffer.size(), nPointFFT)
+                << "The input(buffer) size must be greater than or equal to nPointFFT";
+        bufferMag.resize(binOffsets.size());
         std::vector<float> fftInput(nPointFFT);
         PFFFT_Setup* inputHandle = pffft_new_setup(nPointFFT, PFFFT_REAL);
         pffft_transform_ordered(inputHandle, buffer.data(), fftInput.data(), nullptr,
                                 PFFFT_FORWARD);
         pffft_destroy_setup(inputHandle);
-        std::vector<float> bufferMag(binOffsets.size());
         for (size_t i = 0; i < binOffsets.size(); i++) {
             size_t k = binOffsets[i];
             bufferMag[i] = sqrt((fftInput[k * 2] * fftInput[k * 2]) +
                                 (fftInput[k * 2 + 1] * fftInput[k * 2 + 1]));
         }
+    }
 
-        return bufferMag;
+    // Use FFT transform to convert the buffer to frequency domain
+    // Compute its magnitude at binOffsets
+    void calculateMagnitudeStereo(
+            std::pair<std::vector<float>, std::vector<float>>& bufferMag,  // Output parameter
+            const std::vector<float>& buffer,                              // Input parameter
+            const std::vector<int>& binOffsets,                            // Input parameter
+            const int nPointFFT = kNPointFFT) {                            // Input parameter
+        std::vector<float> leftChannelBuffer(buffer.size() / 2),
+                rightChannelBuffer(buffer.size() / 2);
+        for (size_t i = 0; i < buffer.size(); i += 2) {
+            leftChannelBuffer[i / 2] = buffer[i];
+            rightChannelBuffer[i / 2] = buffer[i + 1];
+        }
+        std::vector<float> leftMagnitude(binOffsets.size());
+        std::vector<float> rightMagnitude(binOffsets.size());
+
+        ASSERT_NO_FATAL_FAILURE(
+                calculateMagnitudeMono(leftMagnitude, leftChannelBuffer, binOffsets, nPointFFT));
+        ASSERT_NO_FATAL_FAILURE(
+                calculateMagnitudeMono(rightMagnitude, rightChannelBuffer, binOffsets, nPointFFT));
+
+        bufferMag = {leftMagnitude, rightMagnitude};
+    }
+
+    // Computes magnitude for mono and stereo inputs and verifies equal magnitude for left and right
+    // channel in case of stereo inputs
+    void calculateAndVerifyMagnitude(std::vector<float>& mag,             // Output parameter
+                                     const int channelLayout,             // Input parameter
+                                     const std::vector<float>& buffer,    // Input parameter
+                                     const std::vector<int>& binOffsets,  // Input parameter
+                                     const int nPointFFT = kNPointFFT) {  // Input parameter
+        if (channelLayout == AudioChannelLayout::LAYOUT_STEREO) {
+            std::pair<std::vector<float>, std::vector<float>> magStereo;
+            ASSERT_NO_FATAL_FAILURE(
+                    calculateMagnitudeStereo(magStereo, buffer, binOffsets, nPointFFT));
+            ASSERT_EQ(magStereo.first, magStereo.second);
+
+            mag = magStereo.first;
+        } else {
+            ASSERT_NO_FATAL_FAILURE(calculateMagnitudeMono(mag, buffer, binOffsets, nPointFFT));
+        }
     }
 
     void updateFrameSize(const Parameter::Common& common) {
diff --git a/audio/aidl/vts/VtsHalBassBoostTargetTest.cpp b/audio/aidl/vts/VtsHalBassBoostTargetTest.cpp
index 5a24be7..c3c1e9e 100644
--- a/audio/aidl/vts/VtsHalBassBoostTargetTest.cpp
+++ b/audio/aidl/vts/VtsHalBassBoostTargetTest.cpp
@@ -48,7 +48,7 @@
 
 class BassBoostEffectHelper : public EffectHelper {
   public:
-    void SetUpBassBoost(int32_t layout = AudioChannelLayout::LAYOUT_STEREO) {
+    void SetUpBassBoost(int32_t layout = kDefaultChannelLayout) {
         ASSERT_NE(nullptr, mFactory);
         ASSERT_NO_FATAL_FAILURE(create(mFactory, mEffect, mDescriptor));
         setFrameCounts(layout);
@@ -113,7 +113,7 @@
         }
     }
 
-    static constexpr int kDurationMilliSec = 720;
+    static constexpr int kDurationMilliSec = 1440;
     static constexpr int kInputSize = kSamplingFrequency * kDurationMilliSec / 1000;
     long mInputFrameCount, mOutputFrameCount;
     std::shared_ptr<IFactory> mFactory;
@@ -187,25 +187,6 @@
         }
     }
 
-    // Use FFT transform to convert the buffer to frequency domain
-    // Compute its magnitude at binOffsets
-    std::vector<float> calculateMagnitude(const std::vector<float>& buffer,
-                                          const std::vector<int>& binOffsets) {
-        std::vector<float> fftInput(kNPointFFT);
-        PFFFT_Setup* inputHandle = pffft_new_setup(kNPointFFT, PFFFT_REAL);
-        pffft_transform_ordered(inputHandle, buffer.data(), fftInput.data(), nullptr,
-                                PFFFT_FORWARD);
-        pffft_destroy_setup(inputHandle);
-        std::vector<float> bufferMag(binOffsets.size());
-        for (size_t i = 0; i < binOffsets.size(); i++) {
-            size_t k = binOffsets[i];
-            bufferMag[i] = sqrt((fftInput[k * 2] * fftInput[k * 2]) +
-                                (fftInput[k * 2 + 1] * fftInput[k * 2 + 1]));
-        }
-
-        return bufferMag;
-    }
-
     // Calculate gain difference between low frequency and high frequency magnitude
     float calculateGainDiff(const std::vector<float>& inputMag,
                             const std::vector<float>& outputMag) {
@@ -218,7 +199,6 @@
         return gains[0] - gains[1];
     }
 
-    static constexpr int kNPointFFT = 16384;
     static constexpr float kBinWidth = (float)kSamplingFrequency / kNPointFFT;
     std::set<int> mStrengthValues;
     int32_t mChannelLayout;
@@ -240,9 +220,11 @@
     roundToFreqCenteredToFftBin(testFrequencies, binOffsets);
 
     // Generate multitone input
-    generateSineWave(testFrequencies, input);
+    ASSERT_NO_FATAL_FAILURE(
+            generateSineWave(testFrequencies, input, 1.0, kSamplingFrequency, mChannelLayout));
 
-    inputMag = calculateMagnitude(input, binOffsets);
+    ASSERT_NO_FATAL_FAILURE(
+            calculateAndVerifyMagnitude(inputMag, mChannelLayout, input, binOffsets));
 
     if (isStrengthValid(0)) {
         ASSERT_NO_FATAL_FAILURE(setAndVerifyParameters(0, EX_NONE));
@@ -254,7 +236,10 @@
             processAndWriteToOutput(input, baseOutput, mEffect, &mOpenEffectReturn));
 
     std::vector<float> baseMag(testFrequencies.size());
-    baseMag = calculateMagnitude(baseOutput, binOffsets);
+
+    ASSERT_NO_FATAL_FAILURE(
+            calculateAndVerifyMagnitude(baseMag, mChannelLayout, baseOutput, binOffsets));
+
     float baseDiff = calculateGainDiff(inputMag, baseMag);
 
     for (int strength : mStrengthValues) {
@@ -271,7 +256,9 @@
         ASSERT_NO_FATAL_FAILURE(
                 processAndWriteToOutput(input, output, mEffect, &mOpenEffectReturn));
 
-        outputMag = calculateMagnitude(output, binOffsets);
+        ASSERT_NO_FATAL_FAILURE(
+                calculateAndVerifyMagnitude(outputMag, mChannelLayout, output, binOffsets));
+
         float diff = calculateGainDiff(inputMag, outputMag);
 
         ASSERT_GT(diff, prevGain);
diff --git a/audio/aidl/vts/VtsHalDownmixTargetTest.cpp b/audio/aidl/vts/VtsHalDownmixTargetTest.cpp
index 322fdc0..5c5be3a 100644
--- a/audio/aidl/vts/VtsHalDownmixTargetTest.cpp
+++ b/audio/aidl/vts/VtsHalDownmixTargetTest.cpp
@@ -86,7 +86,7 @@
 
 class DownmixEffectHelper : public EffectHelper {
   public:
-    void SetUpDownmix(int32_t inputBufferLayout = AudioChannelLayout::LAYOUT_STEREO) {
+    void SetUpDownmix(int32_t inputBufferLayout = kDefaultChannelLayout) {
         ASSERT_NE(nullptr, mFactory);
         ASSERT_NO_FATAL_FAILURE(create(mFactory, mEffect, mDescriptor));
 
diff --git a/audio/aidl/vts/VtsHalDynamicsProcessingTest.cpp b/audio/aidl/vts/VtsHalDynamicsProcessingTest.cpp
index 37441f0..09b6621 100644
--- a/audio/aidl/vts/VtsHalDynamicsProcessingTest.cpp
+++ b/audio/aidl/vts/VtsHalDynamicsProcessingTest.cpp
@@ -46,8 +46,8 @@
 class DynamicsProcessingTestHelper : public EffectHelper {
   public:
     DynamicsProcessingTestHelper(std::pair<std::shared_ptr<IFactory>, Descriptor> pair,
-                                 int32_t channelLayOut = AudioChannelLayout::LAYOUT_STEREO)
-        : mChannelLayout(channelLayOut),
+                                 int32_t channelLayout = kDefaultChannelLayout)
+        : mChannelLayout(channelLayout),
           mChannelCount(::aidl::android::hardware::audio::common::getChannelCount(
                   AudioChannelLayout::make<AudioChannelLayout::layoutMask>(mChannelLayout))) {
         std::tie(mFactory, mDescriptor) = pair;
@@ -162,11 +162,12 @@
     static const std::set<std::vector<DynamicsProcessing::InputGain>> kInputGainTestSet;
 
   private:
-    const int32_t mChannelLayout;
     std::vector<std::pair<DynamicsProcessing::Tag, DynamicsProcessing>> mTags;
 
   protected:
+    const int32_t mChannelLayout;
     const int mChannelCount;
+
     void CleanUp() {
         mTags.clear();
         mPreEqChannelEnable.clear();
@@ -397,6 +398,8 @@
     return true;
 }
 
+// This function calculates power for both and mono and stereo data as the total power for
+// interleaved multichannel data can be calculated by treating it as a continuous mono input.
 float DynamicsProcessingTestHelper::calculateDb(const std::vector<float>& input,
                                                 size_t startSamplePos = 0) {
     return audio_utils_compute_power_mono(input.data() + startSamplePos, AUDIO_FORMAT_PCM_FLOAT,
@@ -623,13 +626,14 @@
     DynamicsProcessingInputGainDataTest()
         : DynamicsProcessingTestHelper((GetParam()), AudioChannelLayout::LAYOUT_MONO) {
         mInput.resize(kFrameCount * mChannelCount);
-        generateSineWave(kInputFrequency /*Input Frequency*/, mInput);
-        mInputDb = calculateDb(mInput);
     }
 
     void SetUp() override {
         SetUpDynamicsProcessingEffect();
         SKIP_TEST_IF_DATA_UNSUPPORTED(mDescriptor.common.flags);
+        ASSERT_NO_FATAL_FAILURE(generateSineWave(kInputFrequency /*Input Frequency*/, mInput, 1.0,
+                                                 kSamplingFrequency, mChannelLayout));
+        mInputDb = calculateDb(mInput);
     }
 
     void TearDown() override { TearDownDynamicsProcessingEffect(); }
@@ -758,13 +762,14 @@
         : DynamicsProcessingTestHelper(GetParam(), AudioChannelLayout::LAYOUT_MONO) {
         mBufferSize = kFrameCount * mChannelCount;
         mInput.resize(mBufferSize);
-        generateSineWave(1000 /*Input Frequency*/, mInput);
-        mInputDb = calculateDb(mInput);
     }
 
     void SetUp() override {
         SetUpDynamicsProcessingEffect();
         SKIP_TEST_IF_DATA_UNSUPPORTED(mDescriptor.common.flags);
+        ASSERT_NO_FATAL_FAILURE(generateSineWave(1000 /*Input Frequency*/, mInput, 1.0,
+                                                 kSamplingFrequency, mChannelLayout));
+        mInputDb = calculateDb(mInput);
     }
 
     void TearDown() override { TearDownDynamicsProcessingEffect(); }
diff --git a/audio/aidl/vts/VtsHalEnvironmentalReverbTargetTest.cpp b/audio/aidl/vts/VtsHalEnvironmentalReverbTargetTest.cpp
index bf48a87..0222923 100644
--- a/audio/aidl/vts/VtsHalEnvironmentalReverbTargetTest.cpp
+++ b/audio/aidl/vts/VtsHalEnvironmentalReverbTargetTest.cpp
@@ -139,6 +139,7 @@
 
     return valueTag;
 }
+
 /**
  * Tests do the following:
  * - Testing parameter range supported by the effect. Range is verified with IEffect.getDescriptor()
@@ -282,10 +283,10 @@
     static constexpr int kDurationMilliSec = 500;
     static constexpr int kBufferSize = kSamplingFrequency * kDurationMilliSec / 1000;
     static constexpr int kInputFrequency = 2000;
+    static constexpr int mChannelLayout = AudioChannelLayout::LAYOUT_STEREO;
 
-    int mStereoChannelCount =
-            getChannelCount(AudioChannelLayout::make<AudioChannelLayout::layoutMask>(
-                    AudioChannelLayout::LAYOUT_STEREO));
+    int mStereoChannelCount = getChannelCount(
+            AudioChannelLayout::make<AudioChannelLayout::layoutMask>(mChannelLayout));
     int mFrameCount = kBufferSize / mStereoChannelCount;
 
     std::shared_ptr<IFactory> mFactory;
@@ -344,10 +345,11 @@
         : EnvironmentalReverbHelper(std::get<DESCRIPTOR_INDEX>(GetParam())) {
         std::tie(mTag, mParamValues) = std::get<TAG_VALUE_PAIR>(GetParam());
         mInput.resize(kBufferSize);
-        generateSineWave(kInputFrequency, mInput);
     }
     void SetUp() override {
         SKIP_TEST_IF_DATA_UNSUPPORTED(mDescriptor.common.flags);
+        ASSERT_NO_FATAL_FAILURE(
+                generateSineWave(kInputFrequency, mInput, 1.0, kSamplingFrequency, mChannelLayout));
         SetUpReverb();
     }
     void TearDown() override {
@@ -434,7 +436,8 @@
 
 TEST_P(EnvironmentalReverbMinimumParamTest, MinimumValueTest) {
     std::vector<float> input(kBufferSize);
-    generateSineWave(kInputFrequency, input);
+    ASSERT_NO_FATAL_FAILURE(
+            generateSineWave(kInputFrequency, input, 1.0, kSamplingFrequency, mChannelLayout));
     std::vector<float> output(kBufferSize);
     setParameterAndProcess(input, output, mValue, mTag);
     float energy = computeOutputEnergy(input, output);
@@ -470,10 +473,11 @@
         : EnvironmentalReverbHelper(std::get<DESCRIPTOR_INDEX>(GetParam())) {
         std::tie(mTag, mParamValues) = std::get<TAG_VALUE_PAIR>(GetParam());
         mInput.resize(kBufferSize);
-        generateSineWave(kInputFrequency, mInput);
     }
     void SetUp() override {
         SKIP_TEST_IF_DATA_UNSUPPORTED(mDescriptor.common.flags);
+        ASSERT_NO_FATAL_FAILURE(
+                generateSineWave(kInputFrequency, mInput, 1.0, kSamplingFrequency, mChannelLayout));
         SetUpReverb();
     }
     void TearDown() override {
@@ -546,14 +550,15 @@
         mParamValues = std::get<PARAM_DENSITY_VALUE>(GetParam());
         mIsInputMute = (std::get<IS_INPUT_MUTE>(GetParam()));
         mInput.resize(kBufferSize);
-        if (mIsInputMute) {
-            std::fill(mInput.begin(), mInput.end(), 0);
-        } else {
-            generateSineWave(kInputFrequency, mInput);
-        }
     }
     void SetUp() override {
         SKIP_TEST_IF_DATA_UNSUPPORTED(mDescriptor.common.flags);
+        if (mIsInputMute) {
+            std::fill(mInput.begin(), mInput.end(), 0);
+        } else {
+            ASSERT_NO_FATAL_FAILURE(generateSineWave(kInputFrequency, mInput, 1.0,
+                                                     kSamplingFrequency, mChannelLayout));
+        }
         SetUpReverb();
     }
     void TearDown() override {
diff --git a/audio/aidl/vts/VtsHalLoudnessEnhancerTargetTest.cpp b/audio/aidl/vts/VtsHalLoudnessEnhancerTargetTest.cpp
index 4c868a9..ace0597 100644
--- a/audio/aidl/vts/VtsHalLoudnessEnhancerTargetTest.cpp
+++ b/audio/aidl/vts/VtsHalLoudnessEnhancerTargetTest.cpp
@@ -153,9 +153,8 @@
   public:
     LoudnessEnhancerDataTest() {
         std::tie(mFactory, mDescriptor) = GetParam();
-        size_t channelCount =
-                getChannelCount(AudioChannelLayout::make<AudioChannelLayout::layoutMask>(
-                        AudioChannelLayout::LAYOUT_STEREO));
+        size_t channelCount = getChannelCount(
+                AudioChannelLayout::make<AudioChannelLayout::layoutMask>(kDefaultChannelLayout));
         mBufferSizeInFrames = kFrameCount * channelCount;
         mInputBuffer.resize(mBufferSizeInFrames);
         generateInputBuffer(mInputBuffer, 0, true, channelCount, kMaxAudioSampleValue);
diff --git a/audio/aidl/vts/VtsHalPresetReverbTargetTest.cpp b/audio/aidl/vts/VtsHalPresetReverbTargetTest.cpp
index 3ce9e53..f127c81 100644
--- a/audio/aidl/vts/VtsHalPresetReverbTargetTest.cpp
+++ b/audio/aidl/vts/VtsHalPresetReverbTargetTest.cpp
@@ -133,11 +133,11 @@
     PresetReverbProcessTest() {
         std::tie(mFactory, mDescriptor) = GetParam();
         mInput.resize(kBufferSize);
-        generateSineWave(1000 /*Input Frequency*/, mInput);
     }
 
     void SetUp() override {
         SKIP_TEST_IF_DATA_UNSUPPORTED(mDescriptor.common.flags);
+        ASSERT_NO_FATAL_FAILURE(generateSineWave(1000 /*Input Frequency*/, mInput));
         ASSERT_NO_FATAL_FAILURE(SetUpPresetReverb());
     }
     void TearDown() override {
diff --git a/audio/aidl/vts/VtsHalVirtualizerTargetTest.cpp b/audio/aidl/vts/VtsHalVirtualizerTargetTest.cpp
index 3021370..c9c7172 100644
--- a/audio/aidl/vts/VtsHalVirtualizerTargetTest.cpp
+++ b/audio/aidl/vts/VtsHalVirtualizerTargetTest.cpp
@@ -94,7 +94,6 @@
         }
     }
 
-    static constexpr int kDefaultChannelLayout = AudioChannelLayout::LAYOUT_STEREO;
     static constexpr int kDurationMilliSec = 720;
     static constexpr int kBufferSize = kSamplingFrequency * kDurationMilliSec / 1000;
     int kChannelCount = getChannelCount(
@@ -159,14 +158,6 @@
         ASSERT_NO_FATAL_FAILURE(TearDownVirtualizer());
     }
 
-    void generateInput(std::vector<float>& buffer) {
-        if (mZeroInput) {
-            std::fill(buffer.begin(), buffer.end(), 0);
-        } else {
-            generateSineWave(1000 /*Input Frequency*/, buffer);
-        }
-    }
-
     static constexpr float kAbsError = 0.00001;
     bool mZeroInput;
 };
@@ -176,7 +167,11 @@
     std::vector<float> output(kBufferSize);
     std::vector<int> strengths = {250, 500, 750, 1000};
 
-    generateInput(input);
+    if (mZeroInput) {
+        std::fill(input.begin(), input.end(), 0);
+    } else {
+        ASSERT_NO_FATAL_FAILURE(generateSineWave(1000 /*Input Frequency*/, input));
+    }
 
     const float inputRmse =
             audio_utils_compute_energy_mono(input.data(), AUDIO_FORMAT_PCM_FLOAT, input.size());
diff --git a/audio/aidl/vts/VtsHalVisualizerTargetTest.cpp b/audio/aidl/vts/VtsHalVisualizerTargetTest.cpp
index 3b07809..f019e2a 100644
--- a/audio/aidl/vts/VtsHalVisualizerTargetTest.cpp
+++ b/audio/aidl/vts/VtsHalVisualizerTargetTest.cpp
@@ -68,9 +68,14 @@
         ASSERT_NE(nullptr, mFactory);
         ASSERT_NO_FATAL_FAILURE(create(mFactory, mEffect, mDescriptor));
 
+        AudioChannelLayout inputLayout = AudioChannelLayout::make<AudioChannelLayout::layoutMask>(
+                AudioChannelLayout::LAYOUT_MONO);
+        AudioChannelLayout outputLayout = inputLayout;
+
         Parameter::Common common = createParamCommon(
-                0 /* session */, 1 /* ioHandle */, 44100 /* iSampleRate */, 44100 /* oSampleRate */,
-                kInputFrameCount /* iFrameCount */, kOutputFrameCount /* oFrameCount */);
+                0 /* session */, 1 /* ioHandle */, mBufferSizeInFrames /* iSampleRate */,
+                mBufferSizeInFrames /* oSampleRate */, kInputFrameCount /* iFrameCount */,
+                kOutputFrameCount /* oFrameCount */, inputLayout, outputLayout);
         ASSERT_NO_FATAL_FAILURE(open(mEffect, common, std::nullopt, &mOpenEffectReturn, EX_NONE));
         ASSERT_NE(nullptr, mEffect);
         mVersion = EffectFactoryHelper::getHalVersion(mFactory);
@@ -261,7 +266,8 @@
 
     constexpr float kPowerToleranceDb = 0.5;
 
-    generateSineWave(std::vector<int>{1000}, mInputBuffer, 1.0, mBufferSizeInFrames);
+    ASSERT_NO_FATAL_FAILURE(generateSineWave(1000, mInputBuffer, 1.0, mBufferSizeInFrames,
+                                             AudioChannelLayout::LAYOUT_MONO));
     const float expectedPowerNormalized = audio_utils_compute_power_mono(
             mInputBuffer.data(), AUDIO_FORMAT_PCM_FLOAT, mInputBuffer.size());
 
@@ -281,8 +287,9 @@
         addLatencyParam(mLatency);
         ASSERT_NO_FATAL_FAILURE(SetAndGetParameters(&allParamsValid));
 
-        generateSineWave(std::vector<int>{1000}, mInputBuffer, maxAudioSampleValue,
-                         mBufferSizeInFrames);
+        ASSERT_NO_FATAL_FAILURE(generateSineWave(std::vector<int>{1000}, mInputBuffer,
+                                                 maxAudioSampleValue, mBufferSizeInFrames,
+                                                 AudioChannelLayout::LAYOUT_MONO));
 
         // The stop and reset calls to the effect are made towards the end in order to fetch the
         // captureSampleBuffer values
diff --git a/audio/aidl/vts/VtsHalVolumeTargetTest.cpp b/audio/aidl/vts/VtsHalVolumeTargetTest.cpp
index b58c1c6..0b68b02 100644
--- a/audio/aidl/vts/VtsHalVolumeTargetTest.cpp
+++ b/audio/aidl/vts/VtsHalVolumeTargetTest.cpp
@@ -66,7 +66,7 @@
 
     void initFrameCount() {
         int channelCount = getChannelCount(
-                AudioChannelLayout::make<AudioChannelLayout::layoutMask>(kDefaultChannelLayout));
+                AudioChannelLayout::make<AudioChannelLayout::layoutMask>(mChannelLayout));
         mInputFrameCount = kBufferSize / channelCount;
         mOutputFrameCount = kBufferSize / channelCount;
     }
@@ -93,10 +93,10 @@
         }
     }
 
-    static constexpr int kDurationMilliSec = 720;
+    static constexpr int kDurationMilliSec = 1440;
     static constexpr int kBufferSize = kSamplingFrequency * kDurationMilliSec / 1000;
     static constexpr int kMinLevel = -96;
-    static constexpr int kDefaultChannelLayout = AudioChannelLayout::LAYOUT_STEREO;
+    static constexpr int mChannelLayout = kDefaultChannelLayout;
     long mInputFrameCount, mOutputFrameCount;
     std::shared_ptr<IFactory> mFactory;
     std::shared_ptr<IEffect> mEffect;
@@ -162,8 +162,6 @@
         mInputMag.resize(mTestFrequencies.size());
         mBinOffsets.resize(mTestFrequencies.size());
         roundToFreqCenteredToFftBin(mTestFrequencies, mBinOffsets, kBinWidth);
-        generateSineWave(mTestFrequencies, mInput);
-        mInputMag = calculateMagnitude(mInput, mBinOffsets, kNPointFFT);
     }
 
     std::vector<int> calculatePercentageDiff(const std::vector<float>& outputMag) {
@@ -183,6 +181,11 @@
         SKIP_TEST_IF_DATA_UNSUPPORTED(mDescriptor.common.flags);
         // Skips test fixture if api_level <= 34 (__ANDROID_API_U__).
         if (kVsrApiLevel <= __ANDROID_API_U__) GTEST_SKIP();
+        ASSERT_NO_FATAL_FAILURE(generateSineWave(mTestFrequencies, mInput, 1.0, kSamplingFrequency,
+                                                 mChannelLayout));
+        ASSERT_NO_FATAL_FAILURE(
+                calculateAndVerifyMagnitude(mInputMag, mChannelLayout, mInput, mBinOffsets));
+
         ASSERT_NO_FATAL_FAILURE(SetUpVolumeControl());
     }
     void TearDown() override {
@@ -194,7 +197,6 @@
     const int kVsrApiLevel;
     static constexpr int kMaxAudioSample = 1;
     static constexpr int kTransitionDuration = 300;
-    static constexpr int kNPointFFT = 16384;
     static constexpr float kBinWidth = (float)kSamplingFrequency / kNPointFFT;
     static constexpr size_t offset = kSamplingFrequency * kTransitionDuration / 1000;
     static constexpr float kBaseLevel = 0;
@@ -218,7 +220,9 @@
     ASSERT_NO_FATAL_FAILURE(setAndVerifyParameters(Volume::levelDb, kBaseLevel, EX_NONE));
     ASSERT_NO_FATAL_FAILURE(processAndWriteToOutput(mInput, output, mEffect, &mOpenEffectReturn));
 
-    outputMag = calculateMagnitude(output, mBinOffsets, kNPointFFT);
+    ASSERT_NO_FATAL_FAILURE(
+            calculateAndVerifyMagnitude(outputMag, mChannelLayout, output, mBinOffsets));
+
     diffs = calculatePercentageDiff(outputMag);
 
     for (size_t i = 0; i < diffs.size(); i++) {
@@ -231,7 +235,10 @@
     ASSERT_NO_FATAL_FAILURE(processAndWriteToOutput(mInput, output, mEffect, &mOpenEffectReturn));
 
     std::vector<float> subOutputMute(output.begin() + offset, output.end());
-    outputMag = calculateMagnitude(subOutputMute, mBinOffsets, kNPointFFT);
+
+    ASSERT_NO_FATAL_FAILURE(
+            calculateAndVerifyMagnitude(outputMag, mChannelLayout, subOutputMute, mBinOffsets));
+
     diffs = calculatePercentageDiff(outputMag);
 
     for (size_t i = 0; i < diffs.size(); i++) {
@@ -239,7 +246,9 @@
     }
 
     // Verifying Fade out
-    outputMag = calculateMagnitude(output, mBinOffsets, kNPointFFT);
+    ASSERT_NO_FATAL_FAILURE(
+            calculateAndVerifyMagnitude(outputMag, mChannelLayout, output, mBinOffsets));
+
     diffs = calculatePercentageDiff(outputMag);
 
     for (size_t i = 0; i < diffs.size(); i++) {
@@ -253,7 +262,9 @@
 
     std::vector<float> subOutputUnmute(output.begin() + offset, output.end());
 
-    outputMag = calculateMagnitude(subOutputUnmute, mBinOffsets, kNPointFFT);
+    ASSERT_NO_FATAL_FAILURE(
+            calculateAndVerifyMagnitude(outputMag, mChannelLayout, subOutputUnmute, mBinOffsets));
+
     diffs = calculatePercentageDiff(outputMag);
 
     for (size_t i = 0; i < diffs.size(); i++) {
@@ -261,7 +272,9 @@
     }
 
     // Verifying Fade in
-    outputMag = calculateMagnitude(output, mBinOffsets, kNPointFFT);
+    ASSERT_NO_FATAL_FAILURE(
+            calculateAndVerifyMagnitude(outputMag, mChannelLayout, output, mBinOffsets));
+
     diffs = calculatePercentageDiff(outputMag);
 
     for (size_t i = 0; i < diffs.size(); i++) {
@@ -283,7 +296,9 @@
     ASSERT_NO_FATAL_FAILURE(
             processAndWriteToOutput(mInput, baseOutput, mEffect, &mOpenEffectReturn));
 
-    outputMag = calculateMagnitude(baseOutput, mBinOffsets, kNPointFFT);
+    ASSERT_NO_FATAL_FAILURE(
+            calculateAndVerifyMagnitude(outputMag, mChannelLayout, baseOutput, mBinOffsets));
+
     baseDiffs = calculatePercentageDiff(outputMag);
 
     for (int level : decreasingLevels) {
@@ -298,7 +313,9 @@
         ASSERT_NO_FATAL_FAILURE(
                 processAndWriteToOutput(mInput, output, mEffect, &mOpenEffectReturn));
 
-        outputMag = calculateMagnitude(output, mBinOffsets, kNPointFFT);
+        ASSERT_NO_FATAL_FAILURE(
+                calculateAndVerifyMagnitude(outputMag, mChannelLayout, output, mBinOffsets));
+
         diffs = calculatePercentageDiff(outputMag);
 
         // Decrease in volume level results in greater magnitude difference
diff --git a/automotive/can/aidl/default/CanController.cpp b/automotive/can/aidl/default/CanController.cpp
index 1435a02..40332d5 100644
--- a/automotive/can/aidl/default/CanController.cpp
+++ b/automotive/can/aidl/default/CanController.cpp
@@ -20,10 +20,10 @@
 #include "CanBusSlcan.h"
 #include "CanBusVirtual.h"
 
-#include <android-base/format.h>
 #include <android-base/logging.h>
 
 #include <filesystem>
+#include <format>
 #include <fstream>
 #include <regex>
 
@@ -235,7 +235,7 @@
                                                    std::string* ifaceName) {
     *ifaceName = {};
     if (mBusesByName.find(busName) == mBusesByName.end()) {
-        return resultToStatus(Result::BAD_BUS_NAME, fmt::format("{} doesn't exist", busName));
+        return resultToStatus(Result::BAD_BUS_NAME, std::format("{} doesn't exist", busName));
     }
     *ifaceName = std::string(mBusesByName[busName]->getIfaceName());
     return ok();
@@ -245,11 +245,11 @@
     if (!isValidName(config.name)) {
         LOG(ERROR) << "Bus name " << config.name << " is invalid";
         return resultToStatus(Result::BAD_BUS_NAME,
-                              fmt::format("{} is not a valid bus name", config.name));
+                              std::format("{} is not a valid bus name", config.name));
     } else if (mBusesByName.find(config.name) != mBusesByName.end()) {
         LOG(ERROR) << "A bus named " << config.name << " already exists!";
         return resultToStatus(Result::INVALID_STATE,
-                              fmt::format("A bus named {} already exists", config.name));
+                              std::format("A bus named {} already exists", config.name));
     }
 
     if (config.interfaceId.getTag() == BusConfig::InterfaceId::Tag::virtualif) {
@@ -310,7 +310,7 @@
     if (result != Result::OK) {
         // the bus failed to come up, don't leave a broken entry in the map.
         mBusesByName.erase(config.name);
-        return resultToStatus(result, fmt::format("CanBus::up failed for {}", config.name));
+        return resultToStatus(result, std::format("CanBus::up failed for {}", config.name));
     }
 
     *ifaceName = mBusesByName[config.name]->getIfaceName();
@@ -321,11 +321,11 @@
     if (mBusesByName.find(busName) == mBusesByName.end()) {
         return resultToStatus(
                 Result::UNKNOWN_ERROR,
-                fmt::format("Couldn't bring down {}, because it doesn't exist", busName));
+                std::format("Couldn't bring down {}, because it doesn't exist", busName));
     }
     Result result = mBusesByName[busName]->down();
     if (result != Result::OK) {
-        return resultToStatus(result, fmt::format("Couldn't bring down {}!", busName));
+        return resultToStatus(result, std::format("Couldn't bring down {}!", busName));
     }
     mBusesByName.erase(busName);
     return ok();
diff --git a/automotive/can/aidl/default/service.cpp b/automotive/can/aidl/default/service.cpp
index eb45167..ef04cfd 100644
--- a/automotive/can/aidl/default/service.cpp
+++ b/automotive/can/aidl/default/service.cpp
@@ -20,12 +20,11 @@
 #include <android/binder_manager.h>
 #include <android/binder_process.h>
 
-namespace android::hardware::automotive::can {
-
 using namespace std::string_literals;
+using namespace android;
 using ::aidl::android::hardware::automotive::can::CanController;
 
-extern "C" int main() {
+int main() {
     base::SetDefaultTag("CanController");
     base::SetMinimumLogSeverity(base::VERBOSE);
 
@@ -40,4 +39,3 @@
     LOG(FATAL) << "CanController exited unexpectedly!";
     return EXIT_FAILURE;
 }
-}  // namespace android::hardware::automotive::can
diff --git a/automotive/can/aidl/default/tools/configurator/canhalconfigurator.cpp b/automotive/can/aidl/default/tools/configurator/canhalconfigurator.cpp
index 94e77b4..87a4497 100644
--- a/automotive/can/aidl/default/tools/configurator/canhalconfigurator.cpp
+++ b/automotive/can/aidl/default/tools/configurator/canhalconfigurator.cpp
@@ -98,7 +98,11 @@
     return true;
 }
 
-extern "C" int main(int argc, char* argv[]) {
+}  // namespace android::hardware::automotive::can
+
+int main(int argc, char* argv[]) {
+    using namespace android::hardware::automotive::can;
+
     std::string configFilepath = static_cast<std::string>(kDefaultConfigPath);
 
     // allow for CLI specification of a config file.
@@ -114,5 +118,3 @@
     }
     return 0;
 }
-
-}  // namespace android::hardware::automotive::can
diff --git a/automotive/vehicle/2.0/default/impl/vhal_v2_0/DefaultVehicleHalServer.cpp b/automotive/vehicle/2.0/default/impl/vhal_v2_0/DefaultVehicleHalServer.cpp
index 86fc70a..6c83339 100644
--- a/automotive/vehicle/2.0/default/impl/vhal_v2_0/DefaultVehicleHalServer.cpp
+++ b/automotive/vehicle/2.0/default/impl/vhal_v2_0/DefaultVehicleHalServer.cpp
@@ -16,10 +16,10 @@
 
 #define LOG_TAG "DefaultVehicleHalServer"
 
+#include <format>
 #include <fstream>
 #include <regex>
 
-#include <android-base/format.h>
 #include <android-base/logging.h>
 #include <android-base/parsedouble.h>
 #include <android-base/parseint.h>
@@ -237,7 +237,7 @@
         auto values = mServerSidePropStore.readAllValues();
         size_t i = 0;
         for (const auto& value : values) {
-            result.buffer += fmt::format("[{}]: {}\n", i, toString(value));
+            result.buffer += std::format("[{}]: {}\n", i, toString(value));
             i++;
         }
         return result;
diff --git a/automotive/vehicle/2.0/default/impl/vhal_v2_0/userhal/FakeUserHal.cpp b/automotive/vehicle/2.0/default/impl/vhal_v2_0/userhal/FakeUserHal.cpp
index e9ebcc6..c735b05 100644
--- a/automotive/vehicle/2.0/default/impl/vhal_v2_0/userhal/FakeUserHal.cpp
+++ b/automotive/vehicle/2.0/default/impl/vhal_v2_0/userhal/FakeUserHal.cpp
@@ -15,6 +15,8 @@
  */
 #define LOG_TAG "FakeUserHal"
 
+#include <format>
+
 #include <cutils/log.h>
 #include <utils/SystemClock.h>
 
@@ -312,34 +314,34 @@
 }
 
 std::string FakeUserHal::showDumpHelp() {
-    return fmt::format("{}: dumps state used for user management\n", kUserHalDumpOption);
+    return std::format("{}: dumps state used for user management\n", kUserHalDumpOption);
 }
 
 std::string FakeUserHal::dump(std::string indent) {
     std::string info;
     if (mInitialUserResponseFromCmd != nullptr) {
-        info += fmt::format("{}InitialUserInfo response: {}\n", indent.c_str(),
+        info += std::format("{}InitialUserInfo response: {}\n", indent.c_str(),
                             toString(*mInitialUserResponseFromCmd).c_str());
     } else {
-        info += fmt::format("{}No InitialUserInfo response\n", indent.c_str());
+        info += std::format("{}No InitialUserInfo response\n", indent.c_str());
     }
     if (mSwitchUserResponseFromCmd != nullptr) {
-        info += fmt::format("{}SwitchUser response: {}\n", indent.c_str(),
+        info += std::format("{}SwitchUser response: {}\n", indent.c_str(),
                             toString(*mSwitchUserResponseFromCmd).c_str());
     } else {
-        info += fmt::format("{}No SwitchUser response\n", indent.c_str());
+        info += std::format("{}No SwitchUser response\n", indent.c_str());
     }
     if (mCreateUserResponseFromCmd != nullptr) {
-        info += fmt::format("{}CreateUser response: {}\n", indent.c_str(),
+        info += std::format("{}CreateUser response: {}\n", indent.c_str(),
                             toString(*mCreateUserResponseFromCmd).c_str());
     } else {
-        info += fmt::format("{}No CreateUser response\n", indent.c_str());
+        info += std::format("{}No CreateUser response\n", indent.c_str());
     }
     if (mSetUserIdentificationAssociationResponseFromCmd != nullptr) {
-        info += fmt::format("{}SetUserIdentificationAssociation response: {}\n", indent.c_str(),
+        info += std::format("{}SetUserIdentificationAssociation response: {}\n", indent.c_str(),
                             toString(*mSetUserIdentificationAssociationResponseFromCmd).c_str());
     } else {
-        info += fmt::format("{}No SetUserIdentificationAssociation response\n", indent.c_str());
+        info += std::format("{}No SetUserIdentificationAssociation response\n", indent.c_str());
     }
     return info;
 }
diff --git a/automotive/vehicle/2.0/default/impl/vhal_v2_0/userhal/include/FakeUserHal.h b/automotive/vehicle/2.0/default/impl/vhal_v2_0/userhal/include/FakeUserHal.h
index 122aee8..33cef54 100644
--- a/automotive/vehicle/2.0/default/impl/vhal_v2_0/userhal/include/FakeUserHal.h
+++ b/automotive/vehicle/2.0/default/impl/vhal_v2_0/userhal/include/FakeUserHal.h
@@ -17,7 +17,6 @@
 #ifndef android_hardware_automotive_vehicle_V2_0_impl_FakeUserHal_H_
 #define android_hardware_automotive_vehicle_V2_0_impl_FakeUserHal_H_
 
-#include <android-base/format.h>
 #include <android-base/result.h>
 
 #include <android/hardware/automotive/vehicle/2.0/types.h>
diff --git a/automotive/vehicle/aidl/emu_metadata/android.hardware.automotive.vehicle-types-meta.json b/automotive/vehicle/aidl/emu_metadata/android.hardware.automotive.vehicle-types-meta.json
index da73b03..eff41c9 100644
--- a/automotive/vehicle/aidl/emu_metadata/android.hardware.automotive.vehicle-types-meta.json
+++ b/automotive/vehicle/aidl/emu_metadata/android.hardware.automotive.vehicle-types-meta.json
@@ -218,7 +218,7 @@
             {
                 "name": "Tire pressure",
                 "value": 392168201,
-                "description": "Tire pressure\nEach tire is identified by its areaConfig.areaId config and its minFloatValue\/maxFloatValue are used to store OEM recommended pressure range.\nThe minFloatValue and maxFloatValue in VehicleAreaConfig must be defined.\nThe minFloatValue in the areaConfig data represents the lower bound of the recommended tire pressure.\nThe maxFloatValue in the areaConfig data represents the upper bound of the recommended tire pressure.\nFor example:\nThe following areaConfig indicates the recommended tire pressure of the left_front tire is from 200.0 KILOPASCAL to 240.0 KILOPASCAL. .areaConfigs = { VehicleAreaConfig { .areaId = VehicleAreaWheel::LEFT_FRONT, .minFloatValue = 200.0, .maxFloatValue = 240.0, } }\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minFloatValue. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxFloatValue. For example, if the recommended tire pressure of left_front tire is from 200.0 KILOPASCAL to 240.0 KILOPASCAL, {@code getMinMaxSupportedValue} for [propId=TIRE_PRESSURE, areaId=VehicleAreaWheel::LEFT_FRONT] must return a {@code MinMaxSupportedValueResult} with OK status, 200.0 as minSupportedValue, 240.0 as maxSupportedValue. At boot, minFloatValue is equal to minSupportedValue, maxFloatValue is equal to maxSupportedValue."
+                "description": "Tire pressure\nEach tire is identified by its areaConfig.areaId config and its minFloatValue\/maxFloatValue are used to store OEM recommended pressure range.\nThe minFloatValue and maxFloatValue in VehicleAreaConfig must be defined.\nThe minFloatValue in the areaConfig data represents the lower bound of the recommended tire pressure.\nThe maxFloatValue in the areaConfig data represents the upper bound of the recommended tire pressure.\nFor example:\nThe following areaConfig indicates the recommended tire pressure of the left_front tire is from 200.0 KILOPASCAL to 240.0 KILOPASCAL. .areaConfigs = { VehicleAreaConfig { .areaId = VehicleAreaWheel::LEFT_FRONT, .minFloatValue = 200.0, .maxFloatValue = 240.0, } }\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo#hasMinSupportedValue} and {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minFloatValue. {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxFloatValue. For example, if the recommended tire pressure of left_front tire is from 200.0 KILOPASCAL to 240.0 KILOPASCAL, {@code getMinMaxSupportedValue} for [propId=TIRE_PRESSURE, areaId=VehicleAreaWheel::LEFT_FRONT] must return a {@code MinMaxSupportedValueResult} with OK status, 200.0 as minSupportedValue, 240.0 as maxSupportedValue. At boot, minFloatValue is equal to minSupportedValue, maxFloatValue is equal to maxSupportedValue."
             },
             {
                 "name": "Critically low tire pressure",
@@ -248,7 +248,7 @@
             {
                 "name": "VEHICLE_PASSIVE_SUSPENSION_HEIGHT",
                 "value": 390071059,
-                "description": "Vehicle Passive Suspension Height in mm.\nThis property must communicate the real-time suspension displacement of the vehicle relative to its neutral position, given in mm. In other words, the displacement of the suspension at any given point in time relative to the suspension's position when the vehicle is on a flat surface with no passengers or cargo. When the suspension is compressed in comparison to the neutral position, the value should be negative. When the suspension is decompressed in comparison to the neutral position, the value should be positive.\nExamples for further clarity: 1) Suppose the user is driving on a smooth flat surface, and all wheels are currently compressed by 2 cm in comparison to the default suspension height. In this scenario, this property must be set to -20 for all wheels. 2) Suppose the user drives over a pothole. While the front left wheel is over the pothole, it's decompressed by 3 cm in comparison to the rest of the wheels, or 1 cm in comparison to the default suspension height. All the others are still compressed by 2 cm. In this scenario, this property must be set to -20 for all wheels except for the front left, which must be set to 10.\nHasSupportedValueInfo.hasMinSupportedValue and HasSupportedValueInfo.hasMaxSupportedValue must be true for all areas.\nMinMaxSupportedValueResult.minSupportedValue represents the lower bound of the suspension height for the wheel at the specified area ID.\nMinMaxSupportedValueResult.maxSupportedValue represents the upper bound of the suspension height for the wheel at the specified area ID."
+                "description": "Vehicle Passive Suspension Height in mm.\nThis property must communicate the real-time suspension displacement of the vehicle relative to its neutral position, given in mm. In other words, the displacement of the suspension at any given point in time relative to the suspension's position when the vehicle is on a flat surface with no passengers or cargo. When the suspension is compressed in comparison to the neutral position, the value should be negative. When the suspension is decompressed in comparison to the neutral position, the value should be positive.\nExamples for further clarity: 1) Suppose the user is driving on a smooth flat surface, and all wheels are currently compressed by 2 cm in comparison to the default suspension height. In this scenario, this property must be set to -20 for all wheels. 2) Suppose the user drives over a pothole. While the front left wheel is over the pothole, it's decompressed by 3 cm in comparison to the rest of the wheels, or 1 cm in comparison to the default suspension height. All the others are still compressed by 2 cm. In this scenario, this property must be set to -20 for all wheels except for the front left, which must be set to 10.\n{@code minInt32Value} and {@code maxInt32Value} in {@code VehicleAreaConfig} must be specified for all supported area IDs.\n{@code minInt32Value} represents the lower bound of the suspension height for the wheel at the specified area ID.\n{@code maxInt32Value} represents the upper bound of the suspension height for the wheel at the specified area ID.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo#hasMinSupportedValue} and {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the specified area ID. {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue."
             },
             {
                 "name": "ENGINE_IDLE_AUTO_STOP_ENABLED",
@@ -262,7 +262,7 @@
                     "ImpactSensorLocation"
                 ],
                 "data_enum": "ImpactSensorLocation",
-                "description": "Impact detected.\nBit flag property to relay information on whether an impact has occurred on a particular side of the vehicle as described through the ImpactSensorLocation enum. As a bit flag property, this property can be set to multiple ORed together values of the enum when necessary.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all bit flags of ImpactSensorLocation are supported.\nIf {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0): {@code getSupportedValuesList} must return a {@code SupportedValuesListResult} that contains supported values unless all bit flags of ImpactSensorLocation are supported. At boot, supportedEnumValues is equal to the supported values list."
+                "description": "Impact detected.\nBit flag property to relay information on whether an impact has occurred on a particular side of the vehicle as described through the ImpactSensorLocation enum. As a bit flag property, this property can be set to multiple ORed together values of the enum when necessary.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all bit flags of ImpactSensorLocation are supported.\nIf {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0): {@code HasSupportedValueInfo#hasSupportedValuesList} must be {@code true}. At boot, supportedEnumValues (if defined) is equal to the supported values list."
             },
             {
                 "name": "Vehicle horn engaged.",
@@ -276,7 +276,7 @@
                     "VehicleGear"
                 ],
                 "data_enum": "VehicleGear",
-                "description": "Currently selected gear\nThis is the gear selected by the user.\nValues in the config array must represent the list of supported gears for this vehicle at boot time. For example, config array for an automatic transmission must contain {GEAR_NEUTRAL, GEAR_REVERSE, GEAR_PARK, GEAR_DRIVE, GEAR_1, GEAR_2,...} and for manual transmission the list must contain {GEAR_NEUTRAL, GEAR_REVERSE, GEAR_1, GEAR_2,...}\nIn the case of an automatic transmission vehicle that allows the driver to select specific gears on demand (i.e. \"manual mode\"), GEAR_SELECTION's value must be set to the specific gear selected by the driver instead of simply GEAR_DRIVE.\nIf {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0): {@code VehicleAreaConfig.HasSupportedValueInfo.hasSupportedValuesList} for the global area ID (0) must be {@code true}. {@code getSupportedValuesList} for [GEAR_SELECTION, areaId=0] must return a {@code SupportedValuesListResult} that contains non-null {@code supportedValuesList}. The supportedValues must represent the list of supported gears for this vehicle. For example, for an automatic transmission, the list can be {GEAR_NEUTRAL, GEAR_REVERSE, GEAR_PARK, GEAR_DRIVE, GEAR_1, GEAR_2,...} and for manual transmission it can be {GEAR_NEUTRAL, GEAR_REVERSE, GEAR_1, GEAR_2,...}. In the case of an automatic transmission vehicle that allows the driver to select specific gears on demand (i.e. \"manual mode\"), the GEAR_SELECTION property value must be set to the specific gear selected by the driver instead of simply GEAR_DRIVE. At boot, the config array's values are equal to the supported values list."
+                "description": "Currently selected gear\nThis is the gear selected by the user.\nValues in the config array must represent the list of supported gears for this vehicle at boot time. For example, config array for an automatic transmission must contain {GEAR_NEUTRAL, GEAR_REVERSE, GEAR_PARK, GEAR_DRIVE, GEAR_1, GEAR_2,...} and for manual transmission the list must contain {GEAR_NEUTRAL, GEAR_REVERSE, GEAR_1, GEAR_2,...}\nIn the case of an automatic transmission vehicle that allows the driver to select specific gears on demand (i.e. \"manual mode\"), GEAR_SELECTION's value must be set to the specific gear selected by the driver instead of simply GEAR_DRIVE.\nIf {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0): {@code VehicleAreaConfig.HasSupportedValueInfo#hasSupportedValuesList} for the global area ID (0) must be {@code true}. {@code getSupportedValuesList} for [GEAR_SELECTION, areaId=0] must return a {@code SupportedValuesListResult} that contains non-null {@code supportedValuesList}. The supportedValues must represent the list of supported gears for this vehicle. For example, for an automatic transmission, the list can be {GEAR_NEUTRAL, GEAR_REVERSE, GEAR_PARK, GEAR_DRIVE, GEAR_1, GEAR_2,...} and for manual transmission it can be {GEAR_NEUTRAL, GEAR_REVERSE, GEAR_1, GEAR_2,...}. In the case of an automatic transmission vehicle that allows the driver to select specific gears on demand (i.e. \"manual mode\"), the GEAR_SELECTION property value must be set to the specific gear selected by the driver instead of simply GEAR_DRIVE. At boot, the config array's values are equal to the supported values list."
             },
             {
                 "name": "CURRENT_GEAR",
@@ -285,7 +285,7 @@
                     "VehicleGear"
                 ],
                 "data_enum": "VehicleGear",
-                "description": "Current gear. In non-manual case, selected gear may not match the current gear. For example, if the selected gear is GEAR_DRIVE, the current gear will be one of GEAR_1, GEAR_2 etc, which reflects the actual gear the transmission is currently running in.\nValues in the config array must represent the list of supported gears for this vehicle at boot time.  For example, config array for an automatic transmission must contain {GEAR_NEUTRAL, GEAR_REVERSE, GEAR_PARK, GEAR_1, GEAR_2,...} and for manual transmission the list must contain {GEAR_NEUTRAL, GEAR_REVERSE, GEAR_1, GEAR_2,...}. This list need not be the same as that of the supported gears reported in GEAR_SELECTION.\nIf {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0): {@code VehicleAreaConfig.HasSupportedValueInfo.hasSupportedValuesList} for the global area ID (0) must be {@code true}. {@code getSupportedValuesList} for [GEAR_SELECTION, areaId=0] must return a {@code SupportedValuesListResult} that contains non-null {@code supportedValuesList}. The supported values list must represent the list of supported gears for this vehicle.  For example, for an automatic transmission, this list can be {GEAR_NEUTRAL, GEAR_REVERSE, GEAR_PARK, GEAR_1, GEAR_2,...} and for manual transmission the list can be {GEAR_NEUTRAL, GEAR_REVERSE, GEAR_1, GEAR_2,...}. This list need not be the same as that of the supported gears reported in GEAR_SELECTION. At boot, the config array's values are equal to the supported values list."
+                "description": "Current gear. In non-manual case, selected gear may not match the current gear. For example, if the selected gear is GEAR_DRIVE, the current gear will be one of GEAR_1, GEAR_2 etc, which reflects the actual gear the transmission is currently running in.\nValues in the config array must represent the list of supported gears for this vehicle at boot time.  For example, config array for an automatic transmission must contain {GEAR_NEUTRAL, GEAR_REVERSE, GEAR_PARK, GEAR_1, GEAR_2,...} and for manual transmission the list must contain {GEAR_NEUTRAL, GEAR_REVERSE, GEAR_1, GEAR_2,...}. This list need not be the same as that of the supported gears reported in GEAR_SELECTION.\nIf {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0): {@code VehicleAreaConfig.HasSupportedValueInfo#hasSupportedValuesList} for the global area ID (0) must be {@code true}. {@code getSupportedValuesList} for [GEAR_SELECTION, areaId=0] must return a {@code SupportedValuesListResult} that contains non-null {@code supportedValuesList}. The supported values list must represent the list of supported gears for this vehicle.  For example, for an automatic transmission, this list can be {GEAR_NEUTRAL, GEAR_REVERSE, GEAR_PARK, GEAR_1, GEAR_2,...} and for manual transmission the list can be {GEAR_NEUTRAL, GEAR_REVERSE, GEAR_1, GEAR_2,...}. This list need not be the same as that of the supported gears reported in GEAR_SELECTION. At boot, the config array's values are equal to the supported values list."
             },
             {
                 "name": "Parking brake state.",
@@ -300,7 +300,7 @@
             {
                 "name": "EV_BRAKE_REGENERATION_LEVEL",
                 "value": 289408012,
-                "description": "Regenerative braking level of a electronic vehicle\nThe minInt32Value and maxInt32Value in VehicleAreaConfig must be defined. All values between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the setting for no regenerative braking, must be 0.\nThe maxInt32Value indicates the setting for the maximum amount of energy regenerated from braking.\nAll values between min and max supported value must be supported.\nIf {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0): {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for global area ID(0) {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is a more granular form of EV_REGENERATIVE_BRAKING_STATE. It allows the user to set a more specific level of regenerative braking if the states in EvRegenerativeBrakingState are not granular enough for the OEM.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Regenerative braking level of a electronic vehicle\nThe minInt32Value and maxInt32Value in VehicleAreaConfig must be defined. All values between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the setting for no regenerative braking, must be 0.\nThe maxInt32Value indicates the setting for the maximum amount of energy regenerated from braking.\nAll values between min and max supported value must be supported.\nIf {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0): {@code HasSupportedValueInfo#hasMinSupportedValue} and {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for global area ID(0) {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is a more granular form of EV_REGENERATIVE_BRAKING_STATE. It allows the user to set a more specific level of regenerative braking if the states in EvRegenerativeBrakingState are not granular enough for the OEM.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "Warning for fuel low level.",
@@ -347,7 +347,7 @@
                     "EvStoppingMode"
                 ],
                 "data_enum": "EvStoppingMode",
-                "description": "Represents property for the current stopping mode of the vehicle.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues must be defined unless all enum values of EvStoppingMode are supported.\nIf {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0): For the global area ID (0), {@code getSupportedValuesList} must return a {@code SupportedValuesListResult} that contains supported values unless all enum values of EvStoppingMode are supported. At boot, supportedEnumValues is equal to the supported values list.\nThe EvStoppingMode enum may be extended to include more states in the future.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Represents property for the current stopping mode of the vehicle.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues must be defined unless all enum values of EvStoppingMode are supported.\nIf {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0): {@code HasSupportedValueInfo#hasSupportedValuesList} must be {@code true}. At boot, supportedEnumValues (if defined) is equal to the supported values list.\nThe EvStoppingMode enum may be extended to include more states in the future.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "ELECTRONIC_STABILITY_CONTROL_ENABLED",
@@ -362,7 +362,7 @@
                     "ErrorState"
                 ],
                 "data_enum": "ElectronicStabilityControlState",
-                "description": "Electronic Stability Control (ESC) state.\nReturns the current state of ESC. This property must always return a valid state defined in ElectronicStabilityControlState or ErrorState. It must not surface errors through StatusCode and must use the supported error states instead.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both ElectronicStabilityControlState (including OTHER, which is not recommended) and ErrorState are supported.\nIf {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0): For the global area ID (0), {@code getSupportedValuesList} must return a {@code SupportedValuesListResult} that contains supported values unless all states of both ElectronicStabilityControlState (including OTHER, which is not recommended) and ErrorState are supported. At boot, supportedEnumValues is equal to the supported values list."
+                "description": "Electronic Stability Control (ESC) state.\nReturns the current state of ESC. This property must always return a valid state defined in ElectronicStabilityControlState or ErrorState. It must not surface errors through StatusCode and must use the supported error states instead.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both ElectronicStabilityControlState (including OTHER, which is not recommended) and ErrorState are supported.\nIf {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0): {@code HasSupportedValueInfo#hasSupportedValuesList} must be {@code true}. At boot, supportedEnumValues (if defined) is equal to the supported values list."
             },
             {
                 "name": "Turn signal light state.",
@@ -385,7 +385,7 @@
             {
                 "name": "Fan speed setting",
                 "value": 356517120,
-                "description": "Fan speed setting\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the lowest fan speed.\nThe maxInt32Value indicates the highest fan speed.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the specific area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Fan speed setting\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the lowest fan speed.\nThe maxInt32Value indicates the highest fan speed.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo#hasMinSupportedValue} and {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the specific area ID. {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "Fan direction setting",
@@ -404,7 +404,7 @@
             {
                 "name": "HVAC_TEMPERATURE_SET",
                 "value": 358614275,
-                "description": "HVAC target temperature set in Celsius.\nThe minFloatValue and maxFloatValue in VehicleAreaConfig must be defined.\nThe minFloatValue indicates the minimum temperature setting in Celsius.\nThe maxFloatValue indicates the maximum temperature setting in Celsius.\nIf all the values between minFloatValue and maxFloatValue are not supported, the configArray can be used to list the valid temperature values that can be set. It also describes a lookup table to convert the temperature from Celsius to Fahrenheit and vice versa for this vehicle. The configArray must be defined if standard unit conversion is not supported on this vehicle.\nThe configArray is set as follows: configArray[0] = [the lower bound of the supported temperature in Celsius] * 10. configArray[1] = [the upper bound of the supported temperature in Celsius] * 10. configArray[2] = [the increment in Celsius] * 10. configArray[3] = [the lower bound of the supported temperature in Fahrenheit] * 10. configArray[4] = [the upper bound of the supported temperature in Fahrenheit] * 10. configArray[5] = [the increment in Fahrenheit] * 10.\nThe minFloatValue and maxFloatValue in VehicleAreaConfig must be equal to configArray[0] and configArray[1] respectively.\nFor example, if the vehicle supports temperature values as: [16.0, 16.5, 17.0 ,..., 28.0] in Celsius [60.5, 61.5, 62.5 ,..., 84.5] in Fahrenheit The configArray should be configArray = {160, 280, 5, 605, 845, 10}.\nIdeally, the ratio of the Celsius increment to the Fahrenheit increment should be as close to the actual ratio of 1 degree Celsius to 1.8 degrees Fahrenheit.\nThere must be a one to one mapping of all Celsius values to Fahrenheit values defined by the configArray. The configArray will be used by clients to convert this property's temperature from Celsius to Fahrenheit. Also, it will let clients know what Celsius value to set the property to achieve their desired Fahreneheit value for the system. If the ECU does not have a one to one mapping of all Celsius values to Fahrenheit values, then the config array should only define the list of Celsius and Fahrenheit values that do have a one to one mapping.\nFor example, if the ECU supports Celsius values from 16 to 28 and Fahrenheit values from 60 to 85 both with an increment of 1, then one possible configArray would be {160, 280, 10, 600, 840, 20}. In this case, 85 would not be a supported temperature.\nAny value set in between a valid value should be rounded to the closest valid value.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the specific area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minFloatValue. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxFloatValue. If not all the values between minSupportedValue and maxSupportedValue are supported, {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} for the specified area ID. At boot, supportedValuesList must be equal to what is described in config array. At boot, minFloatValue is equal to minSupportedValue, maxFloatValue is equal to maxSupportedValue.\nIt is highly recommended that the OEM also implement the HVAC_TEMPERATURE_VALUE_SUGGESTION vehicle property because it provides applications a simple method for determining temperature values that can be set for this vehicle and for converting values between Celsius and Fahrenheit.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "HVAC target temperature set in Celsius.\nThe minFloatValue and maxFloatValue in VehicleAreaConfig must be defined.\nThe minFloatValue indicates the minimum temperature setting in Celsius.\nThe maxFloatValue indicates the maximum temperature setting in Celsius.\nIf all the values between minFloatValue and maxFloatValue are not supported, the configArray can be used to list the valid temperature values that can be set. It also describes a lookup table to convert the temperature from Celsius to Fahrenheit and vice versa for this vehicle. The configArray must be defined if standard unit conversion is not supported on this vehicle.\nThe configArray is set as follows: configArray[0] = [the lower bound of the supported temperature in Celsius] * 10. configArray[1] = [the upper bound of the supported temperature in Celsius] * 10. configArray[2] = [the increment in Celsius] * 10. configArray[3] = [the lower bound of the supported temperature in Fahrenheit] * 10. configArray[4] = [the upper bound of the supported temperature in Fahrenheit] * 10. configArray[5] = [the increment in Fahrenheit] * 10.\nThe minFloatValue and maxFloatValue in VehicleAreaConfig must be equal to configArray[0] and configArray[1] respectively.\nFor example, if the vehicle supports temperature values as: [16.0, 16.5, 17.0 ,..., 28.0] in Celsius [60.5, 61.5, 62.5 ,..., 84.5] in Fahrenheit The configArray should be configArray = {160, 280, 5, 605, 845, 10}.\nIdeally, the ratio of the Celsius increment to the Fahrenheit increment should be as close to the actual ratio of 1 degree Celsius to 1.8 degrees Fahrenheit.\nThere must be a one to one mapping of all Celsius values to Fahrenheit values defined by the configArray. The configArray will be used by clients to convert this property's temperature from Celsius to Fahrenheit. Also, it will let clients know what Celsius value to set the property to achieve their desired Fahreneheit value for the system. If the ECU does not have a one to one mapping of all Celsius values to Fahrenheit values, then the config array should only define the list of Celsius and Fahrenheit values that do have a one to one mapping.\nFor example, if the ECU supports Celsius values from 16 to 28 and Fahrenheit values from 60 to 85 both with an increment of 1, then one possible configArray would be {160, 280, 10, 600, 840, 20}. In this case, 85 would not be a supported temperature.\nAny value set in between a valid value should be rounded to the closest valid value.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo#hasMinSupportedValue} and {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the specific area ID. {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minFloatValue. {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxFloatValue. If not all the values between minSupportedValue and maxSupportedValue are supported, {@code HasSupportedValueInfo#hasSupportedValuesList} must be {@code true} for the specified area ID. At boot, supportedValuesList must be equal to what is described in config array. At boot, minFloatValue is equal to minSupportedValue, maxFloatValue is equal to maxSupportedValue.\nIt is highly recommended that the OEM also implement the HVAC_TEMPERATURE_VALUE_SUGGESTION vehicle property because it provides applications a simple method for determining temperature values that can be set for this vehicle and for converting values between Celsius and Fahrenheit.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "HVAC_DEFROSTER",
@@ -444,17 +444,17 @@
             {
                 "name": "Seat heating\/cooling",
                 "value": 356517131,
-                "description": "Seat heating\/cooling\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value must be 0, unless the vehicle supports seat cooling as well. In this case, minInt32Value indicates the maximum seat temperature cooling setting.\nThe maxInt32Value indicates the maximum seat temperature heating setting.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the specified area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit, but in a specified range of relative temperature settings.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Seat heating\/cooling\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value must be 0, unless the vehicle supports seat cooling as well. In this case, minInt32Value indicates the maximum seat temperature cooling setting.\nThe maxInt32Value indicates the maximum seat temperature heating setting.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo#hasMinSupportedValue} and {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the specified area ID. {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit, but in a specified range of relative temperature settings.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "Side Mirror Heat",
                 "value": 339739916,
-                "description": "Side Mirror Heat\nIncreasing values denote higher heating levels for side mirrors.\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value in the config data MUST be zero and indicates no heating.\nThe maxInt32Value in the config data represents the maximum heating level.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the specified area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative heating settings.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Side Mirror Heat\nIncreasing values denote higher heating levels for side mirrors.\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value in the config data MUST be zero and indicates no heating.\nThe maxInt32Value in the config data represents the maximum heating level.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo#hasMinSupportedValue} and {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the specified area ID. {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative heating settings.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "Steering Wheel Heating\/Cooling",
                 "value": 289408269,
-                "description": "Steering Wheel Heating\/Cooling\nSets the amount of heating\/cooling for the steering wheel.\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value should be 0, unless the vehicle supports steering wheel cooling as well. In such a case, the minInt32Value indicates the maximum steering wheel cooling setting.\nThe maxInt32Value indicates the maximum steering wheel heating setting.\nIf {@code HasSupportedValueInfo} is not null for the global area ID (0): {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true}. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of heating settings.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Steering Wheel Heating\/Cooling\nSets the amount of heating\/cooling for the steering wheel.\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value should be 0, unless the vehicle supports steering wheel cooling as well. In such a case, the minInt32Value indicates the maximum steering wheel cooling setting.\nThe maxInt32Value indicates the maximum steering wheel heating setting.\nIf {@code HasSupportedValueInfo} is not null for the global area ID (0): {@code HasSupportedValueInfo#hasMinSupportedValue} and {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true}. {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of heating settings.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "Temperature units for display",
@@ -463,7 +463,7 @@
                     "VehicleUnit"
                 ],
                 "data_enum": "VehicleUnit",
-                "description": "Temperature units for display\nIndicates whether the vehicle is displaying temperature to the user as Celsius or Fahrenheit.\nVehiclePropConfig.configArray is used to indicate the supported temperature display units.\nFor example: configArray[0] = CELSIUS configArray[1] = FAHRENHEIT\nIf {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0): {@code VehicleAreaConfig.HasSupportedValueInfo.hasSupportedValuesList} for the global area ID (0) must be {@code true}. {@code getSupportedValuesLists} for [HVAC_TEMPERATURE_DISPLAY_UNITS, areaId=0] must return a {@code SupportedValuesListResult} that contains non-null {@code supportedValuesList}, e.g. [CELSIUS, FAHRENHEIT]. At boot, the values in the config array are equal to the supported values list.\nThis parameter MAY be used for displaying any HVAC temperature in the system. Values must be one of VehicleUnit.CELSIUS or VehicleUnit.FAHRENHEIT Note that internally, all temperatures are represented in floating point Celsius.\nIf updating HVAC_TEMPERATURE_DISPLAY_UNITS affects the values of other *_DISPLAY_UNITS properties, then their values must be updated and communicated to the AAOS framework as well.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Temperature units for display\nIndicates whether the vehicle is displaying temperature to the user as Celsius or Fahrenheit.\nVehiclePropConfig.configArray is used to indicate the supported temperature display units.\nFor example: configArray[0] = CELSIUS configArray[1] = FAHRENHEIT\nIf {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0): {@code VehicleAreaConfig.HasSupportedValueInfo#hasSupportedValuesList} for the global area ID (0) must be {@code true}. {@code getSupportedValuesLists} for [HVAC_TEMPERATURE_DISPLAY_UNITS, areaId=0] must return a {@code SupportedValuesListResult} that contains non-null {@code supportedValuesList}, e.g. [CELSIUS, FAHRENHEIT]. At boot, the values in the config array are equal to the supported values list.\nThis parameter MAY be used for displaying any HVAC temperature in the system. Values must be one of VehicleUnit.CELSIUS or VehicleUnit.FAHRENHEIT Note that internally, all temperatures are represented in floating point Celsius.\nIf updating HVAC_TEMPERATURE_DISPLAY_UNITS affects the values of other *_DISPLAY_UNITS properties, then their values must be updated and communicated to the AAOS framework as well.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "Actual fan speed",
@@ -492,7 +492,7 @@
             {
                 "name": "Seat ventilation",
                 "value": 356517139,
-                "description": "Seat ventilation\nThe minInt32Value and maxInt32Value in VehicleAreaConfig must be defined.\nAll integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value must be 0.\nThe maxInt32Value indicates the maximum ventilation setting available for the seat.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the specified area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in the specified range of ventilation settings.\nUsed by HVAC apps and Assistant to enable, change, or read state of seat ventilation.  This is different than seating cooling. It can be on at the same time as cooling, or not.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Seat ventilation\nThe minInt32Value and maxInt32Value in VehicleAreaConfig must be defined.\nAll integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value must be 0.\nThe maxInt32Value indicates the maximum ventilation setting available for the seat.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo#hasMinSupportedValue} and {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the specified area ID. {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in the specified range of ventilation settings.\nUsed by HVAC apps and Assistant to enable, change, or read state of seat ventilation.  This is different than seating cooling. It can be on at the same time as cooling, or not.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "Electric defrosters' status",
@@ -511,7 +511,7 @@
                     "VehicleUnit"
                 ],
                 "data_enum": "VehicleUnit",
-                "description": "Distance units for display\nIndicates which units the car is using to display distances to the user. Eg. Mile, Meter Kilometer.\nDistance units are defined in VehicleUnit. VehiclePropConfig.configArray is used to indicate the supported distance display units. For example: configArray[0] = METER configArray[1] = KILOMETER configArray[2] = MILE\nIf {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0): {@code VehicleAreaConfig.HasSupportedValueInfo.hasSupportedValuesList} for the global area ID (0) must be {@code true}. {@code getSupportedValuesLists} for [DISTANCE_DISPLAY_UNITS, areaId=0] must returns a {@code SupportedValuesListResult} that contains non-null {@code supportedValuesList}, e.g. [METER, KILOMETER, MILE]. At boot, the values in the config array are equal to the supported values list.\nIf updating DISTANCE_DISPLAY_UNITS affects the values of other *_DISPLAY_UNITS properties, then their values must be updated and communicated to the AAOS framework as well.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Distance units for display\nIndicates which units the car is using to display distances to the user. Eg. Mile, Meter Kilometer.\nDistance units are defined in VehicleUnit. VehiclePropConfig.configArray is used to indicate the supported distance display units. For example: configArray[0] = METER configArray[1] = KILOMETER configArray[2] = MILE\nIf {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0): {@code VehicleAreaConfig.HasSupportedValueInfo#hasSupportedValuesList} for the global area ID (0) must be {@code true}. {@code getSupportedValuesLists} for [DISTANCE_DISPLAY_UNITS, areaId=0] must returns a {@code SupportedValuesListResult} that contains non-null {@code supportedValuesList}, e.g. [METER, KILOMETER, MILE]. At boot, the values in the config array are equal to the supported values list.\nIf updating DISTANCE_DISPLAY_UNITS affects the values of other *_DISPLAY_UNITS properties, then their values must be updated and communicated to the AAOS framework as well.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "Fuel volume units for display",
@@ -520,7 +520,7 @@
                     "VehicleUnit"
                 ],
                 "data_enum": "VehicleUnit",
-                "description": "Fuel volume units for display\nIndicates which units the car is using to display fuel volume to the user. Eg. Liter or Gallon.\nVehiclePropConfig.configArray is used to indicate the supported fuel volume display units. Volume units are defined in VehicleUnit. For example: configArray[0] = LITER configArray[1] = GALLON\nIf {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0): {@code VehicleAreaConfig.HasSupportedValueInfo.hasSupportedValuesList} for the global area ID (0) must be {@code true}. {@code getSupportedValuesLists} for [FUEL_VOLUME_DISPLAY_UNITS, areaId=0] must return a {@code SupportedValuesListResult} that contains non-null {@code supportedValuesList}, e.g. [LITER, GALLON]. At boot, the values in the config array are equal to the supported values list.\nIf updating FUEL_VOLUME_DISPLAY_UNITS affects the values of other *_DISPLAY_UNITS properties, then their values must be updated and communicated to the AAOS framework as well.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Fuel volume units for display\nIndicates which units the car is using to display fuel volume to the user. Eg. Liter or Gallon.\nVehiclePropConfig.configArray is used to indicate the supported fuel volume display units. Volume units are defined in VehicleUnit. For example: configArray[0] = LITER configArray[1] = GALLON\nIf {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0): {@code VehicleAreaConfig.HasSupportedValueInfo#hasSupportedValuesList} for the global area ID (0) must be {@code true}. {@code getSupportedValuesLists} for [FUEL_VOLUME_DISPLAY_UNITS, areaId=0] must return a {@code SupportedValuesListResult} that contains non-null {@code supportedValuesList}, e.g. [LITER, GALLON]. At boot, the values in the config array are equal to the supported values list.\nIf updating FUEL_VOLUME_DISPLAY_UNITS affects the values of other *_DISPLAY_UNITS properties, then their values must be updated and communicated to the AAOS framework as well.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "TIRE_PRESSURE_DISPLAY_UNITS",
@@ -529,7 +529,7 @@
                     "VehicleUnit"
                 ],
                 "data_enum": "VehicleUnit",
-                "description": "Tire pressure units for display\nIndicates which units the car is using to display tire pressure to the user. Eg. PSI, Bar or Kilopascal.\nVehiclePropConfig.configArray is used to indicate the supported pressure display units. Pressure units are defined in VehicleUnit. For example: configArray[0] = KILOPASCAL configArray[1] = PSI configArray[2] = BAR\nIf {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0): {@code VehicleAreaConfig.HasSupportedValueInfo.hasSupportedValuesList} for the global area ID (0) must be {@code true}. {@code getSupportedValuesLists} for [TIRE_PRESSURE_DISPLAY_UNITS, areaId=0] must return a {@code SupportedValuesListResult} that contains non-null {@code supportedValuesList}, e.g. [KILOPASCAL, PSI, BAR]. At boot, the values in the config array are equal to the supported values list.\nIf updating TIRE_PRESSURE_DISPLAY_UNITS affects the values of other *_DISPLAY_UNITS properties, then their values must be updated and communicated to the AAOS framework as well.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Tire pressure units for display\nIndicates which units the car is using to display tire pressure to the user. Eg. PSI, Bar or Kilopascal.\nVehiclePropConfig.configArray is used to indicate the supported pressure display units. Pressure units are defined in VehicleUnit. For example: configArray[0] = KILOPASCAL configArray[1] = PSI configArray[2] = BAR\nIf {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0): {@code VehicleAreaConfig.HasSupportedValueInfo#hasSupportedValuesList} for the global area ID (0) must be {@code true}. {@code getSupportedValuesLists} for [TIRE_PRESSURE_DISPLAY_UNITS, areaId=0] must return a {@code SupportedValuesListResult} that contains non-null {@code supportedValuesList}, e.g. [KILOPASCAL, PSI, BAR]. At boot, the values in the config array are equal to the supported values list.\nIf updating TIRE_PRESSURE_DISPLAY_UNITS affects the values of other *_DISPLAY_UNITS properties, then their values must be updated and communicated to the AAOS framework as well.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "EV battery units for display",
@@ -538,7 +538,7 @@
                     "VehicleUnit"
                 ],
                 "data_enum": "VehicleUnit",
-                "description": "EV battery units for display\nIndicates which units the car is using to display EV battery information to the user. Eg. watt-hours(Wh), kilowatt-hours(kWh) or ampere-hours(Ah).\nVehiclePropConfig.configArray is used to indicate the supported electrical energy units. Electrical energy units are defined in VehicleUnit. For example: configArray[0] = WATT_HOUR configArray[1] = AMPERE_HOURS configArray[2] = KILOWATT_HOUR\nIf {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0): {@code VehicleAreaConfig.HasSupportedValueInfo.hasSupportedValuesList} for the global area ID (0) must be {@code true}. {@code getSupportedValuesLists} for [EV_BATTERY_DISPLAY_UNITS, areaId=0] must return a {@code SupportedValuesListResult} that contains non-null {@code supportedValuesList}, e.g. [WATT_HOUR, AMPERE_HOURS, KILOWATT_HOUR]. At boot, the values in the config array are equal to the supported values list.\nIf updating EV_BATTERY_DISPLAY_UNITS affects the values of other *_DISPLAY_UNITS properties, then their values must be updated and communicated to the AAOS framework as well.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "EV battery units for display\nIndicates which units the car is using to display EV battery information to the user. Eg. watt-hours(Wh), kilowatt-hours(kWh) or ampere-hours(Ah).\nVehiclePropConfig.configArray is used to indicate the supported electrical energy units. Electrical energy units are defined in VehicleUnit. For example: configArray[0] = WATT_HOUR configArray[1] = AMPERE_HOURS configArray[2] = KILOWATT_HOUR\nIf {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0): {@code VehicleAreaConfig.HasSupportedValueInfo#hasSupportedValuesList} for the global area ID (0) must be {@code true}. {@code getSupportedValuesLists} for [EV_BATTERY_DISPLAY_UNITS, areaId=0] must return a {@code SupportedValuesListResult} that contains non-null {@code supportedValuesList}, e.g. [WATT_HOUR, AMPERE_HOURS, KILOWATT_HOUR]. At boot, the values in the config array are equal to the supported values list.\nIf updating EV_BATTERY_DISPLAY_UNITS affects the values of other *_DISPLAY_UNITS properties, then their values must be updated and communicated to the AAOS framework as well.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "FUEL_CONSUMPTION_UNITS_DISTANCE_OVER_VOLUME",
@@ -552,7 +552,7 @@
                     "VehicleUnit"
                 ],
                 "data_enum": "VehicleUnit",
-                "description": "Speed units for display\nIndicates type of units the car is using to display speed to user. Eg. m\/s, km\/h, or mph.\nVehiclePropConfig.configArray is used to indicate the supported speed display units. Pressure units are defined in VehicleUnit. For example: configArray[0] = METER_PER_SEC configArray[1] = MILES_PER_HOUR configArray[2] = KILOMETERS_PER_HOUR\nIf {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0): {@code VehicleAreaConfig.HasSupportedValueInfo.hasSupportedValuesList} for the global area ID (0) must be {@code true}. {@code getSupportedValuesLists} for [VEHICLE_SPEED_DISPLAY_UNITS, areaId=0] must return a {@code SupportedValuesListResult} that contains non-null {@code supportedValuesList}, e.g. [METER_PER_SEC, MILES_PER_HOUR, KILOMETERS_PER_HOUR]. At boot, the values in the config array are equal to the supported values list.\nIf updating VEHICLE_SPEED_DISPLAY_UNITS affects the values of other *_DISPLAY_UNITS properties, then their values must be updated and communicated to the AAOS framework as well.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Speed units for display\nIndicates type of units the car is using to display speed to user. Eg. m\/s, km\/h, or mph.\nVehiclePropConfig.configArray is used to indicate the supported speed display units. Pressure units are defined in VehicleUnit. For example: configArray[0] = METER_PER_SEC configArray[1] = MILES_PER_HOUR configArray[2] = KILOMETERS_PER_HOUR\nIf {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0): {@code VehicleAreaConfig.HasSupportedValueInfo#hasSupportedValuesList} for the global area ID (0) must be {@code true}. {@code getSupportedValuesLists} for [VEHICLE_SPEED_DISPLAY_UNITS, areaId=0] must return a {@code SupportedValuesListResult} that contains non-null {@code supportedValuesList}, e.g. [METER_PER_SEC, MILES_PER_HOUR, KILOMETERS_PER_HOUR]. At boot, the values in the config array are equal to the supported values list.\nIf updating VEHICLE_SPEED_DISPLAY_UNITS affects the values of other *_DISPLAY_UNITS properties, then their values must be updated and communicated to the AAOS framework as well.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "EXTERNAL_CAR_TIME",
@@ -645,12 +645,12 @@
             {
                 "name": "Door position",
                 "value": 373295872,
-                "description": "Door position\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the door is closed. The minInt32Value must be 0.\nThe maxInt32Value indicates the door is fully open.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the closed and fully open positions.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative positions.\nSome vehicles (minivans) can open the door electronically. Hence, the ability to write this property.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Door position\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the door is closed. The minInt32Value must be 0.\nThe maxInt32Value indicates the door is fully open.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the closed and fully open positions.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo#hasMinSupportedValue} and {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative positions.\nSome vehicles (minivans) can open the door electronically. Hence, the ability to write this property.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "Door move",
                 "value": 373295873,
-                "description": "Door move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value represents the maximum movement speed of the door while closing.\nThe maxInt32Value represents the maximum movement speed of the door while opening.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the door reaches the positional limit, the value must reset to 0. If DOOR_MOVE's value is currently 0, then that means there is no movement currently occurring.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Door move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value represents the maximum movement speed of the door while closing.\nThe maxInt32Value represents the maximum movement speed of the door while opening.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the door reaches the positional limit, the value must reset to 0. If DOOR_MOVE's value is currently 0, then that means there is no movement currently occurring.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo#hasMinSupportedValue} and {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "Door lock",
@@ -665,22 +665,22 @@
             {
                 "name": "Mirror Z Position",
                 "value": 339741504,
-                "description": "Mirror Z Position\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the mirror is tilted completely downwards. This must be a non-positive value.\nThe maxInt32Value indicates the mirror is tilted completely upwards. This must be a non-negative value.\n0 indicates the mirror is not tilted in either direction.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the fully downward and fully upwards positions.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. Values in between minSupportedValue and maxSupportedValue indicate a transition state between the fully downward and fully upwards positions. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Mirror Z Position\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the mirror is tilted completely downwards. This must be a non-positive value.\nThe maxInt32Value indicates the mirror is tilted completely upwards. This must be a non-negative value.\n0 indicates the mirror is not tilted in either direction.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the fully downward and fully upwards positions.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo#hasMinSupportedValue} and {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. Values in between minSupportedValue and maxSupportedValue indicate a transition state between the fully downward and fully upwards positions. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "Mirror Z Move",
                 "value": 339741505,
-                "description": "Mirror Z Move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value represents the maximum movement speed of the mirror while tilting downwards.\nThe maxInt32Value represents the maximum movement speed of the mirror while tilting upwards.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the mirror reaches the positional limit, the value must reset to 0. If MIRROR_Z_MOVE's value is currently 0, then that means there is no movement currently occurring.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Mirror Z Move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value represents the maximum movement speed of the mirror while tilting downwards.\nThe maxInt32Value represents the maximum movement speed of the mirror while tilting upwards.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the mirror reaches the positional limit, the value must reset to 0. If MIRROR_Z_MOVE's value is currently 0, then that means there is no movement currently occurring.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo#hasMinSupportedValue} and {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "Mirror Y Position",
                 "value": 339741506,
-                "description": "Mirror Y Position\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the mirror is tilted completely to the left. This must be a non-positive value.\nThe maxInt32Value indicates the mirror is tilted completely to the right. This must be a non-negative value.\n0 indicates the mirror is not tilted in either direction.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the left extreme and right extreme positions.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. Values in between minSupportedValue and maxSupportedValue indicate a transition state between the fully downward and fully upwards positions. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Mirror Y Position\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the mirror is tilted completely to the left. This must be a non-positive value.\nThe maxInt32Value indicates the mirror is tilted completely to the right. This must be a non-negative value.\n0 indicates the mirror is not tilted in either direction.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the left extreme and right extreme positions.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo#hasMinSupportedValue} and {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. Values in between minSupportedValue and maxSupportedValue indicate a transition state between the fully downward and fully upwards positions. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "Mirror Y Move",
                 "value": 339741507,
-                "description": "Mirror Y Move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value represents the maximum movement speed of the mirror while tilting left.\nThe maxInt32Value represents the maximum movement speed of the mirror while tilting right.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the mirror reaches the positional limit, the value must reset to 0. If MIRROR_Y_MOVE's value is currently 0, then that means there is no movement currently occurring.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Mirror Y Move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value represents the maximum movement speed of the mirror while tilting left.\nThe maxInt32Value represents the maximum movement speed of the mirror while tilting right.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the mirror reaches the positional limit, the value must reset to 0. If MIRROR_Y_MOVE's value is currently 0, then that means there is no movement currently occurring.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo#hasMinSupportedValue} and {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "Mirror Lock",
@@ -705,12 +705,12 @@
             {
                 "name": "Seat memory select",
                 "value": 356518784,
-                "description": "Seat memory select\nThis parameter selects the memory preset to use to select the seat position.\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined.\nAll integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value is always 0, and the maxInt32Value determines the number of seat preset memory slots available (i.e. numSeatPresets - 1).\nFor instance, if the driver's seat has 3 memory presets, the maxInt32Value will be 2. When the user wants to select a preset, the desired preset number (0, 1, or 2) is set.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue."
+                "description": "Seat memory select\nThis parameter selects the memory preset to use to select the seat position.\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined.\nAll integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value is always 0, and the maxInt32Value determines the number of seat preset memory slots available (i.e. numSeatPresets - 1).\nFor instance, if the driver's seat has 3 memory presets, the maxInt32Value will be 2. When the user wants to select a preset, the desired preset number (0, 1, or 2) is set.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo#hasMinSupportedValue} and {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue."
             },
             {
                 "name": "Seat memory set",
                 "value": 356518785,
-                "description": "Seat memory set\nThis setting allows the user to save the current seat position settings into the selected preset slot.\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined.\nThe minInt32Value must be 0, and the maxInt32Value for each seat position must match the maxInt32Value for SEAT_MEMORY_SELECT.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue."
+                "description": "Seat memory set\nThis setting allows the user to save the current seat position settings into the selected preset slot.\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined.\nThe minInt32Value must be 0, and the maxInt32Value for each seat position must match the maxInt32Value for SEAT_MEMORY_SELECT.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo#hasMinSupportedValue} and {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue."
             },
             {
                 "name": "Seatbelt buckled",
@@ -720,92 +720,92 @@
             {
                 "name": "Seatbelt height position",
                 "value": 356518787,
-                "description": "Seatbelt height position\nAdjusts the shoulder belt anchor point.\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the seat belt's shoulder anchor is at its lowest position.\nThe maxInt32Value indicates the seat belt's shoulder anchor is at its highest position.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the lowest and highest positions.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. Values in between minSupportedValue and maxSupportedValue indicate a transition state between the lowest and highest positions. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Seatbelt height position\nAdjusts the shoulder belt anchor point.\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the seat belt's shoulder anchor is at its lowest position.\nThe maxInt32Value indicates the seat belt's shoulder anchor is at its highest position.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the lowest and highest positions.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo#hasMinSupportedValue} and {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value. Values in between minSupportedValue and maxSupportedValue indicate a transition state between the lowest and highest positions. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "Seatbelt height move",
                 "value": 356518788,
-                "description": "Seatbelt height move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value represents the maximum movement speed of the seat belt's shoulder anchor while moving downwards.\nThe maxInt32Value represents the maximum movement speed of the seat belt's shoulder anchor while moving upwards.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the seat belt reaches the positional limit, the value must reset to 0. If SEAT_BELT_HEIGHT_MOVE's value is currently 0, then that means there is no movement currently occurring.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Seatbelt height move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value represents the maximum movement speed of the seat belt's shoulder anchor while moving downwards.\nThe maxInt32Value represents the maximum movement speed of the seat belt's shoulder anchor while moving upwards.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the seat belt reaches the positional limit, the value must reset to 0. If SEAT_BELT_HEIGHT_MOVE's value is currently 0, then that means there is no movement currently occurring.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo#hasMinSupportedValue} and {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "Seat fore\/aft position",
                 "value": 356518789,
-                "description": "Seat fore\/aft position\nSets the seat position forward and backwards.\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the seat is at its rearward-most linear position.\nThe maxInt32Value indicates the seat is at its forward-most linear position.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the closest and farthest positions.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Seat fore\/aft position\nSets the seat position forward and backwards.\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the seat is at its rearward-most linear position.\nThe maxInt32Value indicates the seat is at its forward-most linear position.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the closest and farthest positions.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo#hasMinSupportedValue} and {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "Seat fore\/aft move",
                 "value": 356518790,
-                "description": "Seat fore\/aft move\nThis property moves the entire seat forward\/backward in the direction that it is facing.\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value represents the maximum movement speed of the seat while moving backward.\nThe maxInt32Value represents the maximum movement speed of the seat while moving forward.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the seat reaches the positional limit, the value must reset to 0. If SEAT_FORE_AFT_MOVE's value is currently 0, then that means there is no movement currently occurring.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Seat fore\/aft move\nThis property moves the entire seat forward\/backward in the direction that it is facing.\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value represents the maximum movement speed of the seat while moving backward.\nThe maxInt32Value represents the maximum movement speed of the seat while moving forward.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the seat reaches the positional limit, the value must reset to 0. If SEAT_FORE_AFT_MOVE's value is currently 0, then that means there is no movement currently occurring.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo#hasMinSupportedValue} and {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "Seat backrest angle 1 position",
                 "value": 356518791,
-                "description": "Seat backrest angle 1 position\nBackrest angle 1 is the actuator closest to the bottom of the seat.\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the seat backrest's full recline position w.r.t the actuator at the bottom of the seat.\nThe maxInt32Value indicates the seat backrest's most upright\/forward position w.r.t the actuator at the bottom of the seat.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the full recline and upright\/forward positions.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. Values in between minSupportedValue and maxSupportedValue indicate a transition state between the full recline and upright\/forward positions. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Seat backrest angle 1 position\nBackrest angle 1 is the actuator closest to the bottom of the seat.\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the seat backrest's full recline position w.r.t the actuator at the bottom of the seat.\nThe maxInt32Value indicates the seat backrest's most upright\/forward position w.r.t the actuator at the bottom of the seat.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the full recline and upright\/forward positions.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo#hasMinSupportedValue} and {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. Values in between minSupportedValue and maxSupportedValue indicate a transition state between the full recline and upright\/forward positions. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "Seat backrest angle 1 move",
                 "value": 356518792,
-                "description": "Seat backrest angle 1 move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value represents the maximum movement speed of the seat backrest while reclining.\nThe maxInt32Value represents the maximum movement speed of the seat backrest while angling forward.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the seat backrest reaches the positional limit, the value must reset to 0. If SEAT_BACKREST_ANGLE_1_MOVE's value is currently 0, then that means there is no movement currently occurring.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Seat backrest angle 1 move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value represents the maximum movement speed of the seat backrest while reclining.\nThe maxInt32Value represents the maximum movement speed of the seat backrest while angling forward.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the seat backrest reaches the positional limit, the value must reset to 0. If SEAT_BACKREST_ANGLE_1_MOVE's value is currently 0, then that means there is no movement currently occurring.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo#hasMinSupportedValue} and {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "Seat backrest angle 2 position",
                 "value": 356518793,
-                "description": "Seat backrest angle 2 position\nBackrest angle 2 is the next actuator up from the bottom of the seat.\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the seat backrest's full recline position w.r.t the next actuator in the backrest from the one at the bottom of the seat (see SEAT_BACKREST_ANGLE_1_POS for additional details).\nThe maxInt32Value indicates the seat backrest's most upright\/forward position w.r.t the next actuator in the backrest from the one at the bottom of the seat(see SEAT_BACKREST_ANGLE_1_POS for additional details).\nValues in between minInt32Value and maxInt32Value indicate a transition state between the full recline and upright\/forward positions.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} ihas the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. Values in between minSupportedValue and maxSupportedValue indicate a transition state between the full recline and upright\/forward positions. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Seat backrest angle 2 position\nBackrest angle 2 is the next actuator up from the bottom of the seat.\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the seat backrest's full recline position w.r.t the next actuator in the backrest from the one at the bottom of the seat (see SEAT_BACKREST_ANGLE_1_POS for additional details).\nThe maxInt32Value indicates the seat backrest's most upright\/forward position w.r.t the next actuator in the backrest from the one at the bottom of the seat(see SEAT_BACKREST_ANGLE_1_POS for additional details).\nValues in between minInt32Value and maxInt32Value indicate a transition state between the full recline and upright\/forward positions.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo#hasMinSupportedValue} and {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult#maxSupportedValue} ihas the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. Values in between minSupportedValue and maxSupportedValue indicate a transition state between the full recline and upright\/forward positions. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "Seat backrest angle 2 move",
                 "value": 356518794,
-                "description": "Seat backrest angle 2 move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value represents the maximum movement speed of the seat backrest while reclining.\nThe maxInt32Value represents the maximum movement speed of the seat backrest while angling forward.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the seat backrest reaches the positional limit, the value must reset to 0. If SEAT_BACKREST_ANGLE_2_MOVE's value is currently 0, then that means there is no movement currently occurring.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Seat backrest angle 2 move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value represents the maximum movement speed of the seat backrest while reclining.\nThe maxInt32Value represents the maximum movement speed of the seat backrest while angling forward.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the seat backrest reaches the positional limit, the value must reset to 0. If SEAT_BACKREST_ANGLE_2_MOVE's value is currently 0, then that means there is no movement currently occurring.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo#hasMinSupportedValue} and {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "Seat height position",
                 "value": 356518795,
-                "description": "Seat height position\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the seat is in its lowest position.\nThe maxInt32Value indicates the seat is in its highest position.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the lowest and highest positions.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. position. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Seat height position\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the seat is in its lowest position.\nThe maxInt32Value indicates the seat is in its highest position.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the lowest and highest positions.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo#hasMinSupportedValue} and {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value. position. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "Seat height move",
                 "value": 356518796,
-                "description": "Seat height move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value represents the maximum movement speed of the seat while moving downward.\nThe maxInt32Value represents the maximum movement speed of the seat while moving upward.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the seat reaches the positional limit, the value must reset to 0. If SEAT_HEIGHT_MOVE's value is currently 0, then that means there is no movement currently occurring.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Seat height move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value represents the maximum movement speed of the seat while moving downward.\nThe maxInt32Value represents the maximum movement speed of the seat while moving upward.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the seat reaches the positional limit, the value must reset to 0. If SEAT_HEIGHT_MOVE's value is currently 0, then that means there is no movement currently occurring.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo#hasMinSupportedValue} and {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "Seat depth position",
                 "value": 356518797,
-                "description": "Seat depth position\nSets the seat depth, distance from back rest to front edge of seat.\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the seat is in its shallowest position (i.e. the position with the smallest distance between the front edge of the seat cushion and the rear end of the seat).\nThe maxInt32Value indicates the seat is in its deepest position (i.e. the position with the largest distance between the front edge of the seat cushion and the rear end of the seat).\nValues in between minInt32Value and maxInt32Value indicate a transition state between the shallowest and deepest positions.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Seat depth position\nSets the seat depth, distance from back rest to front edge of seat.\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the seat is in its shallowest position (i.e. the position with the smallest distance between the front edge of the seat cushion and the rear end of the seat).\nThe maxInt32Value indicates the seat is in its deepest position (i.e. the position with the largest distance between the front edge of the seat cushion and the rear end of the seat).\nValues in between minInt32Value and maxInt32Value indicate a transition state between the shallowest and deepest positions.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo#hasMinSupportedValue} and {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "Seat depth move",
                 "value": 356518798,
-                "description": "Seat depth move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value represents the maximum movement speed of the seat while getting shallower.\nThe maxInt32Value represents the maximum movement speed of the seat while getting deeper.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the seat backrest reaches the positional limit, the value must reset to 0. If SEAT_DEPTH_MOVE's value is currently 0, then that means there is no movement currently occurring.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Seat depth move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value represents the maximum movement speed of the seat while getting shallower.\nThe maxInt32Value represents the maximum movement speed of the seat while getting deeper.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the seat backrest reaches the positional limit, the value must reset to 0. If SEAT_DEPTH_MOVE's value is currently 0, then that means there is no movement currently occurring.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo#hasMinSupportedValue} and {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "Seat tilt position",
                 "value": 356518799,
-                "description": "Seat tilt position\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the seat bottom is angled at its lowest angular position. This corresponds to the seat's front edge at its lowest possible position relative to the rear end of the seat.\nThe maxInt32Value indicates the seat bottom is angled at its highest angular position. This corresponds to the seat's front edge at its highest possible position relative to the rear end of the seat.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the lowest and highest positions.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Seat tilt position\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the seat bottom is angled at its lowest angular position. This corresponds to the seat's front edge at its lowest possible position relative to the rear end of the seat.\nThe maxInt32Value indicates the seat bottom is angled at its highest angular position. This corresponds to the seat's front edge at its highest possible position relative to the rear end of the seat.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the lowest and highest positions.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo#hasMinSupportedValue} and {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "Seat tilt move",
                 "value": 356518800,
-                "description": "Seat tilt move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value represents the maximum movement speed of the front edge of the seat while moving downward.\nThe maxInt32Value represents the maximum movement speed of the front edge of the seat while moving upward.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the seat bottom reaches the positional limit, the value must reset to 0. If SEAT_TILT_MOVE's value is currently 0, then that means there is no movement currently occurring.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Seat tilt move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value represents the maximum movement speed of the front edge of the seat while moving downward.\nThe maxInt32Value represents the maximum movement speed of the front edge of the seat while moving upward.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the seat bottom reaches the positional limit, the value must reset to 0. If SEAT_TILT_MOVE's value is currently 0, then that means there is no movement currently occurring.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo#hasMinSupportedValue} and {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "Lumber fore\/aft position",
                 "value": 356518801,
-                "description": "Lumber fore\/aft position\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the lumbar support is in its rearward most position (i.e. least supportive position).\nThe maxInt32Value indicates the lumbar support is in its forward most position (i.e. most supportive position).\nValues in between minInt32Value and maxInt32Value indicate a transition state between the forward and rearward positions.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Lumber fore\/aft position\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the lumbar support is in its rearward most position (i.e. least supportive position).\nThe maxInt32Value indicates the lumbar support is in its forward most position (i.e. most supportive position).\nValues in between minInt32Value and maxInt32Value indicate a transition state between the forward and rearward positions.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo#hasMinSupportedValue} and {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "Lumbar fore\/aft move",
                 "value": 356518802,
-                "description": "Lumbar fore\/aft move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value represents the maximum movement speed of the seat's lumbar support while moving backward.\nThe maxInt32Value represents the maximum movement speed of the seat's lumbar support while moving forward.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the seat's lumbar support reaches the positional limit, the value must reset to 0. If SEAT_LUMBAR_FORE_AFT_MOVE's value is currently 0, then that means there is no movement currently occurring.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Lumbar fore\/aft move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value represents the maximum movement speed of the seat's lumbar support while moving backward.\nThe maxInt32Value represents the maximum movement speed of the seat's lumbar support while moving forward.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the seat's lumbar support reaches the positional limit, the value must reset to 0. If SEAT_LUMBAR_FORE_AFT_MOVE's value is currently 0, then that means there is no movement currently occurring.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo#hasMinSupportedValue} and {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "Lumbar side support position",
                 "value": 356518803,
-                "description": "Lumbar side support position\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the lumbar side support is in its thinnest position (i.e. most support).\nThe maxInt32Value indicates the lumbar side support is in its widest position (i.e. least support).\nValues in between minInt32Value and maxInt32Value indicate a transition state between the thinnest and widest positions.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Lumbar side support position\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the lumbar side support is in its thinnest position (i.e. most support).\nThe maxInt32Value indicates the lumbar side support is in its widest position (i.e. least support).\nValues in between minInt32Value and maxInt32Value indicate a transition state between the thinnest and widest positions.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo#hasMinSupportedValue} and {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "Lumbar side support move",
                 "value": 356518804,
-                "description": "Lumbar side support move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value represents the maximum movement speed of the seat's lumbar side support while getting thinner.\nThe maxInt32Value represents the maximum movement speed of the seat's lumbar side support while getting wider.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the seat's lumbar side support reaches the positional limit, the value must reset to 0. If SEAT_LUMBAR_SIDE_SUPPORT_MOVE's value is currently 0, then that means there is no movement currently occurring.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Lumbar side support move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value represents the maximum movement speed of the seat's lumbar side support while getting thinner.\nThe maxInt32Value represents the maximum movement speed of the seat's lumbar side support while getting wider.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the seat's lumbar side support reaches the positional limit, the value must reset to 0. If SEAT_LUMBAR_SIDE_SUPPORT_MOVE's value is currently 0, then that means there is no movement currently occurring.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo#hasMinSupportedValue} and {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "SEAT_HEADREST_HEIGHT_POS",
@@ -815,32 +815,32 @@
             {
                 "name": "Headrest height position",
                 "value": 356518820,
-                "description": "Headrest height position\nSets the headrest height for supported seats. VehiclePropConfig.areaConfigs specifies which seats are supported.\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the headrest is in its lowest position.\nThe maxInt32Value indicates the headrest is in its highest position.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the lowest and highest positions.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Headrest height position\nSets the headrest height for supported seats. VehiclePropConfig.areaConfigs specifies which seats are supported.\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the headrest is in its lowest position.\nThe maxInt32Value indicates the headrest is in its highest position.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the lowest and highest positions.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo#hasMinSupportedValue} and {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "Headrest height move",
                 "value": 356518806,
-                "description": "Headrest height move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value represents the maximum movement speed of the seat's headrest while moving down.\nThe maxInt32Value represents the maximum movement speed of the seat's headrest while moving up.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the seat's headrest reaches the positional limit, the value must reset to 0. If SEAT_HEADREST_HEIGHT_MOVE's value is currently 0, then that means there is no movement currently occurring.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Headrest height move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value represents the maximum movement speed of the seat's headrest while moving down.\nThe maxInt32Value represents the maximum movement speed of the seat's headrest while moving up.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the seat's headrest reaches the positional limit, the value must reset to 0. If SEAT_HEADREST_HEIGHT_MOVE's value is currently 0, then that means there is no movement currently occurring.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo#hasMinSupportedValue} and {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "Headrest angle position",
                 "value": 356518807,
-                "description": "Headrest angle position\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the headrest is in its full recline position.\nThe maxInt32Value indicates the headrest is in its most upright\/forward position.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the full recline and most upright\/forward positions.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Headrest angle position\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the headrest is in its full recline position.\nThe maxInt32Value indicates the headrest is in its most upright\/forward position.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the full recline and most upright\/forward positions.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo#hasMinSupportedValue} and {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "Headrest angle move",
                 "value": 356518808,
-                "description": "Headrest angle move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value represents the maximum movement speed of the seat's headrest while moving into a shallow position.\nThe maxInt32Value represents the maximum movement speed of the seat's headrest while moving into an upright\/forward position.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the seat's headrest reaches the positional limit, the value must reset to 0. If SEAT_HEADREST_ANGLE_MOVE's value is currently 0, then that means there is no movement currently occurring.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Headrest angle move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value represents the maximum movement speed of the seat's headrest while moving into a shallow position.\nThe maxInt32Value represents the maximum movement speed of the seat's headrest while moving into an upright\/forward position.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the seat's headrest reaches the positional limit, the value must reset to 0. If SEAT_HEADREST_ANGLE_MOVE's value is currently 0, then that means there is no movement currently occurring.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo#hasMinSupportedValue} and {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "Headrest fore\/aft position",
                 "value": 356518809,
-                "description": "Headrest fore\/aft position\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the headrest is in its rearward-most linear position.\nThe maxInt32Value indicates the headrest is in its forward-most linear position.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the forward and rearward positions.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Headrest fore\/aft position\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the headrest is in its rearward-most linear position.\nThe maxInt32Value indicates the headrest is in its forward-most linear position.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the forward and rearward positions.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo#hasMinSupportedValue} and {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "Headrest fore\/aft move",
                 "value": 356518810,
-                "description": "Headrest fore\/aft move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value represents the maximum movement speed of the seat's headrest while moving backward.\nThe maxInt32Value represents the maximum movement speed of the seat's headrest while moving forward.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the seat's headrest reaches the positional limit, the value must reset to 0. If SEAT_HEADREST_FORE_AFT_MOVE's value is currently 0, then that means there is no movement currently occurring.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Headrest fore\/aft move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value represents the maximum movement speed of the seat's headrest while moving backward.\nThe maxInt32Value represents the maximum movement speed of the seat's headrest while moving forward.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the seat's headrest reaches the positional limit, the value must reset to 0. If SEAT_HEADREST_FORE_AFT_MOVE's value is currently 0, then that means there is no movement currently occurring.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo#hasMinSupportedValue} and {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "SEAT_FOOTWELL_LIGHTS_STATE",
@@ -849,7 +849,7 @@
                     "VehicleLightState"
                 ],
                 "data_enum": "VehicleLightState",
-                "description": "Represents property for the seat footwell lights state.\nSEAT_FOOTWELL_LIGHTS_STATE reflects the current state of the lights at any point in time. This is different from the function of SEAT_FOOTWELL_LIGHTS_SWITCH which represents the position of the switch controlling the lights. Therefore, SEAT_FOOTWELL_LIGHTS_STATE may not match the value of SEAT_FOOTWELL_LIGHTS_SWITCH (e.g. SEAT_FOOTWELL_LIGHTS_SWITCH=AUTOMATIC and SEAT_FOOTWELL_LIGHTS_STATE=ON).\nThis property should only be implemented if SEAT_FOOTWELL_LIGHTS_STATE's value may be different from that of CABIN_LIGHTS_STATE.\nFor each supported area ID, the VehicleAreaConfig#supportedEnumValues must be defined unless all enum values of VehicleLightState are supported.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} for the area ID unless all enum values of VehicleLightState are supported. At boot, the supported values list is the same as supportedEnumValues."
+                "description": "Represents property for the seat footwell lights state.\nSEAT_FOOTWELL_LIGHTS_STATE reflects the current state of the lights at any point in time. This is different from the function of SEAT_FOOTWELL_LIGHTS_SWITCH which represents the position of the switch controlling the lights. Therefore, SEAT_FOOTWELL_LIGHTS_STATE may not match the value of SEAT_FOOTWELL_LIGHTS_SWITCH (e.g. SEAT_FOOTWELL_LIGHTS_SWITCH=AUTOMATIC and SEAT_FOOTWELL_LIGHTS_STATE=ON).\nThis property should only be implemented if SEAT_FOOTWELL_LIGHTS_STATE's value may be different from that of CABIN_LIGHTS_STATE.\nFor each supported area ID, the VehicleAreaConfig#supportedEnumValues must be defined unless all enum values of VehicleLightState are supported.\nIf {@code HasSupportedValueInfo} is not {@code null} for a specifc area ID: {@code HasSupportedValueInfo#hasSupportedValuesList} must be {@code true}. At boot, supportedEnumValues (if defined) is equal to the supported values list."
             },
             {
                 "name": "SEAT_FOOTWELL_LIGHTS_SWITCH",
@@ -858,7 +858,7 @@
                     "VehicleLightSwitch"
                 ],
                 "data_enum": "VehicleLightSwitch",
-                "description": "Represents property for the seat footwell lights switch.\nSEAT_FOOTWELL_LIGHTS_SWITCH represents the position of the switch controlling the lights. This is different from the function of SEAT_FOOTWELL_LIGHTS_STATE which reflects the current state of the lights at any point in time. Therefore, SEAT_FOOTWELL_LIGHTS_SWITCH may not match the value of SEAT_FOOTWELL_LIGHTS_STATE (e.g. SEAT_FOOTWELL_LIGHTS_SWITCH=AUTOMATIC and SEAT_FOOTWELL_LIGHTS_STATE=ON).\nThis property should only be implemented if SEAT_FOOTWELL_LIGHTS_SWITCH's value may be different from that of CABIN_LIGHTS_SWITCH.\nFor each supported area ID, the VehicleAreaConfig#supportedEnumValues must be defined unless all enum values of VehicleLightSwitch are supported.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} for the area ID unless all enum values of VehicleLightSwitch are supported. At boot, the supported values list is the same as supportedEnumValues.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Represents property for the seat footwell lights switch.\nSEAT_FOOTWELL_LIGHTS_SWITCH represents the position of the switch controlling the lights. This is different from the function of SEAT_FOOTWELL_LIGHTS_STATE which reflects the current state of the lights at any point in time. Therefore, SEAT_FOOTWELL_LIGHTS_SWITCH may not match the value of SEAT_FOOTWELL_LIGHTS_STATE (e.g. SEAT_FOOTWELL_LIGHTS_SWITCH=AUTOMATIC and SEAT_FOOTWELL_LIGHTS_STATE=ON).\nThis property should only be implemented if SEAT_FOOTWELL_LIGHTS_SWITCH's value may be different from that of CABIN_LIGHTS_SWITCH.\nFor each supported area ID, the VehicleAreaConfig#supportedEnumValues must be defined unless all enum values of VehicleLightSwitch are supported.\nIf {@code HasSupportedValueInfo} is not {@code null} for a specifc area ID: {@code HasSupportedValueInfo#hasSupportedValuesList} must be {@code true}. At boot, supportedEnumValues (if defined) is equal to the supported values list.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "SEAT_EASY_ACCESS_ENABLED",
@@ -877,32 +877,32 @@
                     "VehicleAirbagLocation"
                 ],
                 "data_enum": "VehicleAirbagLocation",
-                "description": "Seat airbags deployed\nBit flag property to relay information on which airbags have been deployed in the vehicle at each seat, vs which ones are currently still armed. If SEAT_AIRBAG_ENABLED is set to false at a particular areaId, this property should return status code UNAVAILABLE at that areaId.\nEnums apply to each seat, not the global vehicle. For example, VehicleAirbagsLocation#CURTAIN at the driver seat areaId represents whether the driver side curtain airbag has been deployed. Multiple bit flags can be set to indicate that multiple different airbags have been deployed for the seat.\nFor each seat area ID, the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of VehicleAirbagLocation are supported (including OTHER, which is not recommended).\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} for the area ID unless all states of VehicleAirbagLocation are supported (including OTHER, which is not recommended). At boot, the supported values list is the same as supportedEnumValues."
+                "description": "Seat airbags deployed\nBit flag property to relay information on which airbags have been deployed in the vehicle at each seat, vs which ones are currently still armed. If SEAT_AIRBAG_ENABLED is set to false at a particular areaId, this property should return status code UNAVAILABLE at that areaId.\nEnums apply to each seat, not the global vehicle. For example, VehicleAirbagsLocation#CURTAIN at the driver seat areaId represents whether the driver side curtain airbag has been deployed. Multiple bit flags can be set to indicate that multiple different airbags have been deployed for the seat.\nFor each seat area ID, the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of VehicleAirbagLocation are supported (including OTHER, which is not recommended).\nIf {@code HasSupportedValueInfo} is not {@code null} for a specifc area ID: {@code HasSupportedValueInfo#hasSupportedValuesList} must be {@code true}. At boot, supportedEnumValues (if defined) is equal to the supported values list."
             },
             {
                 "name": "SEAT_CUSHION_SIDE_SUPPORT_POS",
                 "value": 356518815,
-                "description": "Represents property for seat’s hipside (bottom cushion’s side) support position.\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the seat cushion side support is in its thinnest position (i.e. most support).\nThe maxInt32Value indicates the seat cushion side support is in its widest position (i.e. least support).\nValues in between minInt32Value and maxInt32Value indicate a transition state between the thinnest and widest positions.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Represents property for seat’s hipside (bottom cushion’s side) support position.\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the seat cushion side support is in its thinnest position (i.e. most support).\nThe maxInt32Value indicates the seat cushion side support is in its widest position (i.e. least support).\nValues in between minInt32Value and maxInt32Value indicate a transition state between the thinnest and widest positions.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo#hasMinSupportedValue} and {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "SEAT_CUSHION_SIDE_SUPPORT_MOVE",
                 "value": 356518816,
-                "description": "Represents property for movement direction and speed of seat cushion side support.\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value represents the maximum movement speed of the seat cushion side support when growing thinner (i.e. support is increasing).\nThe maxInt32Value represents the maximum movement speed of the seat cushion side support when growing wider (i.e. support is decreasing).\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the seat cushion side support reaches the positional limit, the value must reset to 0. If SEAT_CUSHION_SIDE_SUPPORT_MOVE's value is currently 0, then that means there is no movement currently occurring.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Represents property for movement direction and speed of seat cushion side support.\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value represents the maximum movement speed of the seat cushion side support when growing thinner (i.e. support is increasing).\nThe maxInt32Value represents the maximum movement speed of the seat cushion side support when growing wider (i.e. support is decreasing).\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the seat cushion side support reaches the positional limit, the value must reset to 0. If SEAT_CUSHION_SIDE_SUPPORT_MOVE's value is currently 0, then that means there is no movement currently occurring.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo#hasMinSupportedValue} and {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "SEAT_LUMBAR_VERTICAL_POS",
                 "value": 356518817,
-                "description": "Represents property for seat’s lumbar support vertical position.\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the lumbar support's lowest position.\nThe maxInt32Value indicates the lumbar support's highest position.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the lowest and highest positions.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Represents property for seat’s lumbar support vertical position.\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the lumbar support's lowest position.\nThe maxInt32Value indicates the lumbar support's highest position.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the lowest and highest positions.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo#hasMinSupportedValue} and {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "SEAT_LUMBAR_VERTICAL_MOVE",
                 "value": 356518818,
-                "description": "Represents property for vertical movement direction and speed of seat lumbar support.\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the lumbar support is moving at the fastest downward speed.\nThe maxInt32Value indicates the lumbar support is moving at the fastest upward speed.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the seat cushion side support reaches the positional limit, the value must reset to 0. If SEAT_LUMBAR_VERTICAL_MOVE's value is currently 0, then that means there is no movement currently occurring.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Represents property for vertical movement direction and speed of seat lumbar support.\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the lumbar support is moving at the fastest downward speed.\nThe maxInt32Value indicates the lumbar support is moving at the fastest upward speed.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the seat cushion side support reaches the positional limit, the value must reset to 0. If SEAT_LUMBAR_VERTICAL_MOVE's value is currently 0, then that means there is no movement currently occurring.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo#hasMinSupportedValue} and {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "SEAT_WALK_IN_POS",
                 "value": 356518819,
-                "description": "Represents property that indicates the current walk-in position of the seat.\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the normal seat position. The minInt32Value must be 0.\nThe maxInt32Value indicates the seat is in the full walk-in position.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the normal and walk-in positions.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative positions.\nThe area ID must match the seat that actually moves when the walk-in feature activates, not the intended seat the passengers will sit in.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Represents property that indicates the current walk-in position of the seat.\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the normal seat position. The minInt32Value must be 0.\nThe maxInt32Value indicates the seat is in the full walk-in position.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the normal and walk-in positions.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo#hasMinSupportedValue} and {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative positions.\nThe area ID must match the seat that actually moves when the walk-in feature activates, not the intended seat the passengers will sit in.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "SEAT_BELT_PRETENSIONER_DEPLOYED",
@@ -921,12 +921,12 @@
             {
                 "name": "Window Position",
                 "value": 322964416,
-                "description": "Window Position\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined.\nAll integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the window is closed\/fully open out of plane. If the window cannot open out of plane, then minInt32Value is the position of the window when fully closed and must be 0. If the window can open out of plane, the minInt32Value indicates the window is fully open in its position out of plane and will be a negative value. See the example below for a more detailed explanation.\nThe maxInt32Value indicates the window is fully open.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the closed\/fully open out-of-plane and fully open positions.\nThis property is not in any particular unit but in a specified range of relative positions.\nFor example, this is how the property should work for a window that can move out of plane: For a window that may open out of plane (i.e. vent mode of sunroof) this parameter will work with negative values as follows: Max = sunroof completely open 0 = sunroof closed. Min = sunroof vent completely open\nNote that in this mode, 0 indicates the window is closed.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Window Position\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined.\nAll integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the window is closed\/fully open out of plane. If the window cannot open out of plane, then minInt32Value is the position of the window when fully closed and must be 0. If the window can open out of plane, the minInt32Value indicates the window is fully open in its position out of plane and will be a negative value. See the example below for a more detailed explanation.\nThe maxInt32Value indicates the window is fully open.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the closed\/fully open out-of-plane and fully open positions.\nThis property is not in any particular unit but in a specified range of relative positions.\nFor example, this is how the property should work for a window that can move out of plane: For a window that may open out of plane (i.e. vent mode of sunroof) this parameter will work with negative values as follows: Max = sunroof completely open 0 = sunroof closed. Min = sunroof vent completely open\nNote that in this mode, 0 indicates the window is closed.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo#hasMinSupportedValue} and {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "Window Move",
                 "value": 322964417,
-                "description": "Window Move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the window is closing in plane\/opening in the out of plane direction at the fastest speed.\nThe maxInt32Value indicates the window is opening in plane\/closing in the out of plane direction at the fastest speed.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the window reaches the positional limit, the value must reset to 0. If WINDOW_MOVE's value is currently 0, then that means there is no movement currently occurring.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nFor a window that may open out of plane (i.e. vent mode of sunroof) this parameter will work as follows:\nIf sunroof is open: Max = open the sunroof further, automatically stop when fully open. Min = close the sunroof, automatically stop when sunroof is closed.\nIf vent is open: Max = close the vent, automatically stop when vent is closed. Min = open the vent further, automatically stop when vent is fully open.\nIf sunroof is in the closed position: Max = open the sunroof, automatically stop when sunroof is fully open. Min = open the vent, automatically stop when vent is fully open.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Window Move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the window is closing in plane\/opening in the out of plane direction at the fastest speed.\nThe maxInt32Value indicates the window is opening in plane\/closing in the out of plane direction at the fastest speed.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the window reaches the positional limit, the value must reset to 0. If WINDOW_MOVE's value is currently 0, then that means there is no movement currently occurring.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nFor a window that may open out of plane (i.e. vent mode of sunroof) this parameter will work as follows:\nIf sunroof is open: Max = open the sunroof further, automatically stop when fully open. Min = close the sunroof, automatically stop when sunroof is closed.\nIf vent is open: Max = close the vent, automatically stop when vent is closed. Min = open the vent further, automatically stop when vent is fully open.\nIf sunroof is in the closed position: Max = open the sunroof, automatically stop when sunroof is fully open. Min = open the vent, automatically stop when vent is fully open.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo#hasMinSupportedValue} and {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "Window Child Lock",
@@ -936,7 +936,7 @@
             {
                 "name": "WINDSHIELD_WIPERS_PERIOD",
                 "value": 322964421,
-                "description": "Windshield wipers period (milliseconds).\nReturns the instantaneous time period for 1 full cycle of the windshield wipers in milliseconds. A full cycle is defined as a wiper moving from and returning to its rest position.\nWhen an intermittent wiper setting is selected, this property value must be set to 0 during the \"pause\" period of the intermittent wiping.\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined.\nThe minInt32Value must be set to 0 for each area ID.\nThe maxInt32Value for each area ID must specify the longest wiper period.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true}. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue."
+                "description": "Windshield wipers period (milliseconds).\nReturns the instantaneous time period for 1 full cycle of the windshield wipers in milliseconds. A full cycle is defined as a wiper moving from and returning to its rest position.\nWhen an intermittent wiper setting is selected, this property value must be set to 0 during the \"pause\" period of the intermittent wiping.\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined.\nThe minInt32Value must be set to 0 for each area ID.\nThe maxInt32Value for each area ID must specify the longest wiper period.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo#hasMinSupportedValue} and {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true}. {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue."
             },
             {
                 "name": "Windshield wipers state.",
@@ -945,7 +945,7 @@
                     "WindshieldWipersState"
                 ],
                 "data_enum": "WindshieldWipersState",
-                "description": "Windshield wipers state.\nReturns the current state of the windshield wipers. The value of WINDSHIELD_WIPERS_STATE may not match the value of WINDSHIELD_WIPERS_SWITCH. (e.g. WINDSHIELD_WIPERS_STATE = ON and WINDSHIELD_WIPERS_SWITCH = WindshieldWipersSwitch#AUTO).\nIf WINDSHIELD_WIPERS_STATE = ON and WINDSHIELD_WIPERS_PERIOD is implemented, then WINDSHIELD_WIPERS_PERIOD must reflect the time period of 1 full cycle of the wipers.\nFor each supported area ID, the VehicleAreaConfig#supportedEnumValues array must be defined unless all states in WindshieldWipersState are supported (including OTHER, which is not recommended).\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} for the area ID unless all states in WindshieldWipersState are supported (including OTHER, which is not recommended). At boot, the supported values list is the same as supportedEnumValues."
+                "description": "Windshield wipers state.\nReturns the current state of the windshield wipers. The value of WINDSHIELD_WIPERS_STATE may not match the value of WINDSHIELD_WIPERS_SWITCH. (e.g. WINDSHIELD_WIPERS_STATE = ON and WINDSHIELD_WIPERS_SWITCH = WindshieldWipersSwitch#AUTO).\nIf WINDSHIELD_WIPERS_STATE = ON and WINDSHIELD_WIPERS_PERIOD is implemented, then WINDSHIELD_WIPERS_PERIOD must reflect the time period of 1 full cycle of the wipers.\nFor each supported area ID, the VehicleAreaConfig#supportedEnumValues array must be defined unless all states in WindshieldWipersState are supported (including OTHER, which is not recommended).\nIf {@code HasSupportedValueInfo} is not {@code null} for a specifc area ID: {@code HasSupportedValueInfo#hasSupportedValuesList} must be {@code true}. At boot, supportedEnumValues (if defined) is equal to the supported values list."
             },
             {
                 "name": "Windshield wipers switch.",
@@ -954,27 +954,27 @@
                     "WindshieldWipersSwitch"
                 ],
                 "data_enum": "WindshieldWipersSwitch",
-                "description": "Windshield wipers switch.\nRepresents the position of the switch controlling the windshield wipers. The value of WINDSHIELD_WIPERS_SWITCH may not match the value of WINDSHIELD_WIPERS_STATE (e.g. WINDSHIELD_WIPERS_SWITCH = AUTO and WINDSHIELD_WIPERS_STATE = WindshieldWipersState#ON).\nFor each supported area ID, the VehicleAreaConfig#supportedEnumValues array must be defined unless all states in WindshieldWipersSwitch are supported (including OTHER, which is not recommended).\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} for the area ID unless all states in WindshieldWipersSwitch are supported (including OTHER, which is not recommended). At boot, the supported values list is the same as supportedEnumValues.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only.\nIf this property is implemented as VehiclePropertyAccess.READ_WRITE and the OTHER state is listed in the VehicleAreaConfig#supportedEnumValues array, then OTHER is not a supported value for writing. It is only a supported value for reading."
+                "description": "Windshield wipers switch.\nRepresents the position of the switch controlling the windshield wipers. The value of WINDSHIELD_WIPERS_SWITCH may not match the value of WINDSHIELD_WIPERS_STATE (e.g. WINDSHIELD_WIPERS_SWITCH = AUTO and WINDSHIELD_WIPERS_STATE = WindshieldWipersState#ON).\nFor each supported area ID, the VehicleAreaConfig#supportedEnumValues array must be defined unless all states in WindshieldWipersSwitch are supported (including OTHER, which is not recommended).\nIf {@code HasSupportedValueInfo} is not {@code null} for a specifc area ID: {@code HasSupportedValueInfo#hasSupportedValuesList} must be {@code true}. At boot, supportedEnumValues (if defined) is equal to the supported values list.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only.\nIf this property is implemented as VehiclePropertyAccess.READ_WRITE and the OTHER state is listed in the VehicleAreaConfig#supportedEnumValues array, then OTHER is not a supported value for writing. It is only a supported value for reading."
             },
             {
                 "name": "Steering wheel depth position",
                 "value": 289410016,
-                "description": "Steering wheel depth position\nAll steering wheel properties' unique ids start from 0x0BE0.\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All values between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the steering wheel position closest to the driver.\nThe maxInt32Value indicates the steering wheel position furthest from the driver.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the closest and furthest positions.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true}. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Steering wheel depth position\nAll steering wheel properties' unique ids start from 0x0BE0.\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All values between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the steering wheel position closest to the driver.\nThe maxInt32Value indicates the steering wheel position furthest from the driver.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the closest and furthest positions.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo#hasMinSupportedValue} and {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true}. {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "Steering wheel depth movement",
                 "value": 289410017,
-                "description": "Steering wheel depth movement\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All values between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the steering wheel moving towards the driver.\nThe maxInt32Value indicates the steering wheel moving away from the driver.\nLarger integers, either positive or negative, indicate a faster movement speed. Once the steering wheel reaches the positional limit, the value must reset to 0. If STEERING_WHEEL_DEPTH_MOVE's value is currently 0, then that means there is no movement currently occurring.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true}. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Steering wheel depth movement\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All values between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the steering wheel moving towards the driver.\nThe maxInt32Value indicates the steering wheel moving away from the driver.\nLarger integers, either positive or negative, indicate a faster movement speed. Once the steering wheel reaches the positional limit, the value must reset to 0. If STEERING_WHEEL_DEPTH_MOVE's value is currently 0, then that means there is no movement currently occurring.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo#hasMinSupportedValue} and {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true}. {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "Steering wheel height position",
                 "value": 289410018,
-                "description": "Steering wheel height position\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All values between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the steering wheel being in the lowest position.\nThe maxInt32Value indicates the steering wheel being in the highest position.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the lowest and highest positions.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true}. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Steering wheel height position\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All values between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the steering wheel being in the lowest position.\nThe maxInt32Value indicates the steering wheel being in the highest position.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the lowest and highest positions.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo#hasMinSupportedValue} and {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true}. {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "Steering wheel height movement",
                 "value": 289410019,
-                "description": "Steering wheel height movement\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All values between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the steering wheel moving downwards.\nThe maxInt32Value indicates the steering wheel moving upwards.\nLarger integers, either positive or negative, indicate a faster movement speed. Once the steering wheel reaches the positional limit, the value must reset to 0. If STEERING_WHEEL_HEIGHT_MOVE's value is currently 0, then that means there is no movement currently occurring.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true}. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Steering wheel height movement\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All values between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the steering wheel moving downwards.\nThe maxInt32Value indicates the steering wheel moving upwards.\nLarger integers, either positive or negative, indicate a faster movement speed. Once the steering wheel reaches the positional limit, the value must reset to 0. If STEERING_WHEEL_HEIGHT_MOVE's value is currently 0, then that means there is no movement currently occurring.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo#hasMinSupportedValue} and {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true}. {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "STEERING_WHEEL_THEFT_LOCK_ENABLED",
@@ -994,7 +994,7 @@
             {
                 "name": "GLOVE_BOX_DOOR_POS",
                 "value": 356518896,
-                "description": "Property that represents the current position of the glove box door.\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates that the glove box door is closed. The minInt32Value must be 0.\nThe maxInt32Value indicates that the glove box door is in the fully open position.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the closed and fully open positions.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true}. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative positions.\nThe area ID must match the seat by which the glove box is intended to be used  (e.g. if the front right dashboard has a glove box embedded in it, then the area ID should be SEAT_1_RIGHT).\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Property that represents the current position of the glove box door.\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates that the glove box door is closed. The minInt32Value must be 0.\nThe maxInt32Value indicates that the glove box door is in the fully open position.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the closed and fully open positions.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo#hasMinSupportedValue} and {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true}. {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative positions.\nThe area ID must match the seat by which the glove box is intended to be used  (e.g. if the front right dashboard has a glove box embedded in it, then the area ID should be SEAT_1_RIGHT).\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "Lock or unlock the glove box.",
@@ -1176,7 +1176,7 @@
                     "VehicleLightState"
                 ],
                 "data_enum": "VehicleLightState",
-                "description": "Steering wheel lights state\nRepresents the current state of the steering wheel lights. This is different from STEERING_WHEEL_LIGHTS_SWITCH which represents the position of the switch controlling the lights. Therefore, STEERING_WHEEL_LIGHTS_STATE may not match the value of STEERING_WHEEL_LIGHTS_SWITCH (e.g. STEERING_WHEEL_LIGHTS_SWITCH=AUTOMATIC and STEERING_WHEEL_LIGHTS_STATE=ON).\nThis property should only be implemented if STEERING_WHEEL_LIGHTS_STATE's value may be different from that of CABIN_LIGHTS_STATE.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues must be defined unless all enum values of VehicleLightState are supported.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} unless all enum values of VehicleLightState are supported. At boot, the supported values list is the same as supportedEnumValues."
+                "description": "Steering wheel lights state\nRepresents the current state of the steering wheel lights. This is different from STEERING_WHEEL_LIGHTS_SWITCH which represents the position of the switch controlling the lights. Therefore, STEERING_WHEEL_LIGHTS_STATE may not match the value of STEERING_WHEEL_LIGHTS_SWITCH (e.g. STEERING_WHEEL_LIGHTS_SWITCH=AUTOMATIC and STEERING_WHEEL_LIGHTS_STATE=ON).\nThis property should only be implemented if STEERING_WHEEL_LIGHTS_STATE's value may be different from that of CABIN_LIGHTS_STATE.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues must be defined unless all enum values of VehicleLightState are supported.\nIf {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0): {@code HasSupportedValueInfo#hasSupportedValuesList} must be {@code true}. At boot, supportedEnumValues (if defined) is equal to the supported values list."
             },
             {
                 "name": "Steering wheel lights switch",
@@ -1185,7 +1185,7 @@
                     "VehicleLightSwitch"
                 ],
                 "data_enum": "VehicleLightSwitch",
-                "description": "Steering wheel lights switch\nRepresents the position of the switch controlling the steering wheel lights. This is different from STEERING_WHEEL_LIGHTS_STATE which represents the current state of the steering wheel lights. Therefore, STEERING_WHEEL_LIGHTS_SWITCH may not match the value of STEERING_WHEEL_LIGHTS_STATE (e.g. STEERING_WHEEL_LIGHTS_SWITCH=AUTOMATIC and STEERING_WHEEL_LIGHTS_STATE=ON).\nThis property should only be implemented if STEERING_WHEEL_LIGHTS_SWITCH's value may be different from that of CABIN_LIGHTS_SWITCH.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues must be defined unless all enum values of VehicleLightSwitch are supported.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} unless all enum values of VehicleLightSwitch are supported. At boot, the supported values list is the same as supportedEnumValues.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Steering wheel lights switch\nRepresents the position of the switch controlling the steering wheel lights. This is different from STEERING_WHEEL_LIGHTS_STATE which represents the current state of the steering wheel lights. Therefore, STEERING_WHEEL_LIGHTS_SWITCH may not match the value of STEERING_WHEEL_LIGHTS_STATE (e.g. STEERING_WHEEL_LIGHTS_SWITCH=AUTOMATIC and STEERING_WHEEL_LIGHTS_STATE=ON).\nThis property should only be implemented if STEERING_WHEEL_LIGHTS_SWITCH's value may be different from that of CABIN_LIGHTS_SWITCH.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues must be defined unless all enum values of VehicleLightSwitch are supported.\nIf {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0): {@code HasSupportedValueInfo#hasSupportedValuesList} must be {@code true}. At boot, supportedEnumValues (if defined) is equal to the supported values list.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "SUPPORT_CUSTOMIZE_VENDOR_PERMISSION",
@@ -1339,12 +1339,12 @@
             {
                 "name": "EV_CHARGE_CURRENT_DRAW_LIMIT",
                 "value": 291508031,
-                "description": "Indicates the maximum current draw threshold for charging set by the user\nconfigArray[0] is used to specify the max current draw allowed by the vehicle in Amperes.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Indicates the maximum current draw threshold for charging set by the user\nconfigArray[0] is used to specify the max current draw allowed by the vehicle in Amperes at boot time.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}, {@code HasSupportedValueInfo#hasMaxSupportedValue} and {@code HasSupportedValueInfo#hasMinSupportedValue} must be {@code true}. {@code MinMaxSupportedValueResult#maxSupportedValue} specifies the max current draw allowed by the vehicle in Amperes at the current moment. {@code MinMaxSupportedValueResult#minSupportedValue} must be 0. At boot, configArray[0] is equal to maxSupportedValue.\nIf the max current draw allowed by the vehicle may change dynamically, {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} and {@code MinMaxSupportedValueResult#maxSupportedValue} must be implemented.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "EV_CHARGE_PERCENT_LIMIT",
                 "value": 291508032,
-                "description": "Indicates the maximum charge percent threshold set by the user\nReturns a float value from 0 to 100.\nconfigArray is used to specify the valid values. For example, if the vehicle supports the following charge percent limit values: [20, 40, 60, 80, 100] then the configArray should be {20, 40, 60, 80, 100} If the configArray is empty then all values from 0 to 100 must be valid.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Indicates the maximum charge percent threshold set by the user\nReturns a float value from 0 to 100.\nconfigArray is used to specify the valid values at boot time. For example, if the vehicle supports the following charge percent limit values: [20, 40, 60, 80, 100] then the configArray should be {20, 40, 60, 80, 100} If the configArray is empty then all values from 0 to 100 must be valid.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}, {@code HasSupportedValueInfo#hasSupportedValuesList} must be {@code true}. {@code SupportedValuesListResult#supportedValuesList} specifies the valid maximum charge percent threshold options at the current moment. At boot, configArray content must match the supported values list.\nIf the valid values may change dynamically, {@code HasSupportedValueInfo#hasSupportedValuesList} must be {@code true} and {@code SupportedValuesListResult#supportedValuesList} must be implemented.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "Charging state of the car",
@@ -1428,7 +1428,7 @@
                     "VehicleAutonomousState"
                 ],
                 "data_enum": "VehicleAutonomousState",
-                "description": "Current state of vehicle autonomy.\nDefines the level of autonomy currently engaged in the vehicle from the J3016_202104 revision of the SAE standard levels 0-5, with 0 representing no autonomy and 5 representing full driving automation.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of VehicleAutonomousState are supported.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} unless all enum values of VehicleAutonomousState are supported. At boot, the supported values list is the same as supportedEnumValues."
+                "description": "Current state of vehicle autonomy.\nDefines the level of autonomy currently engaged in the vehicle from the J3016_202104 revision of the SAE standard levels 0-5, with 0 representing no autonomy and 5 representing full driving automation.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of VehicleAutonomousState are supported.\nIf {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0): {@code HasSupportedValueInfo#hasSupportedValuesList} must be {@code true}. At boot, supportedEnumValues (if defined) is equal to the supported values list."
             },
             {
                 "name": "VEHICLE_DRIVING_AUTOMATION_TARGET_LEVEL",
@@ -1437,7 +1437,7 @@
                     "VehicleAutonomousState"
                 ],
                 "data_enum": "VehicleAutonomousState",
-                "description": "Target state of vehicle autonomy.\nDefines the level of autonomy being targeted by the vehicle from the J3016_202104 revision of the SAE standard levels 0-5, with 0 representing no autonomy and 5 representing full driving automation.\nFor example, suppose the vehicle is currently in a Level 3 state of automation and wants to give the driver full manual control (i.e. Level 0) as soon as it's safe to do so. In this scenario, this property must be set to VehicleAutonomousState.LEVEL_0. Similarly, if the vehicle is currently in Level 1 state of automation and wants to go up to Level 2, this property must be set to VehicleAutonomousState.LEVEL_2. If the vehicle has already reached and is currently in the target level of autonomy, this property must be equal to the value of VEHICLE_DRIVING_AUTOMATION_CURRENT_LEVEL.\nFor the global area ID (0), the SupportedValuesListResult#supportedValuesList array must be defined unless all states of VehicleAutonomousState are supported. These values must match the values in supportedValuesList of VEHICLE_DRIVING_AUTOMATION_CURRENT_LEVEL.\nFor the property that communicates the current state of autonomy, see VEHICLE_DRIVING_AUTOMATION_CURRENT_LEVEL."
+                "description": "Target state of vehicle autonomy.\nDefines the level of autonomy being targeted by the vehicle from the J3016_202104 revision of the SAE standard levels 0-5, with 0 representing no autonomy and 5 representing full driving automation.\nFor example, suppose the vehicle is currently in a Level 3 state of automation and wants to give the driver full manual control (i.e. Level 0) as soon as it's safe to do so. In this scenario, this property must be set to VehicleAutonomousState.LEVEL_0. Similarly, if the vehicle is currently in Level 1 state of automation and wants to go up to Level 2, this property must be set to VehicleAutonomousState.LEVEL_2. If the vehicle has already reached and is currently in the target level of autonomy, this property must be equal to the value of VEHICLE_DRIVING_AUTOMATION_CURRENT_LEVEL.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of VehicleAutonomousState are supported. The supported values for this property must be the same as the supported values for VEHICLE_DRIVING_AUTOMATION_CURRENT_LEVEL.\nIf {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0): {@code HasSupportedValueInfo#hasSupportedValuesList} must be {@code true}. At boot, supportedEnumValues (if defined) is equal to the supported values list.\nFor the property that communicates the current state of autonomy, see VEHICLE_DRIVING_AUTOMATION_CURRENT_LEVEL."
             },
             {
                 "name": "CAMERA_SERVICE_CURRENT_STATE",
@@ -1466,7 +1466,7 @@
                     "ErrorState"
                 ],
                 "data_enum": "AutomaticEmergencyBrakingState",
-                "description": "Automatic Emergency Braking (AEB) state.\nReturns the current state of AEB. This property must always return a valid state defined in AutomaticEmergencyBrakingState or ErrorState. It must not surface errors through StatusCode and must use the supported error states instead. This property should apply for higher speed applications only. For representing the state of the low speed automatic emergency braking system, LOW_SPEED_AUTOMATIC_EMERGENCY_BRAKING_STATE should be used.\nIf AEB includes forward collision warnings before activating the brakes, those warnings must be surfaced through the Forward Collision Warning (FCW) properties.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both AutomaticEmergencyBrakingState (including OTHER, which is not recommended) and ErrorState are supported.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} unless all states of both AutomaticEmergencyBrakingState (including OTHER, which is not recommended) and ErrorState are supported. At boot, the supported values list is the same as supportedEnumValues."
+                "description": "Automatic Emergency Braking (AEB) state.\nReturns the current state of AEB. This property must always return a valid state defined in AutomaticEmergencyBrakingState or ErrorState. It must not surface errors through StatusCode and must use the supported error states instead. This property should apply for higher speed applications only. For representing the state of the low speed automatic emergency braking system, LOW_SPEED_AUTOMATIC_EMERGENCY_BRAKING_STATE should be used.\nIf AEB includes forward collision warnings before activating the brakes, those warnings must be surfaced through the Forward Collision Warning (FCW) properties.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both AutomaticEmergencyBrakingState (including OTHER, which is not recommended) and ErrorState are supported.\nIf {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0): {@code HasSupportedValueInfo#hasSupportedValuesList} must be {@code true}. At boot, supportedEnumValues (if defined) is equal to the supported values list."
             },
             {
                 "name": "FORWARD_COLLISION_WARNING_ENABLED",
@@ -1481,7 +1481,7 @@
                     "ErrorState"
                 ],
                 "data_enum": "ForwardCollisionWarningState",
-                "description": "Forward Collision Warning (FCW) state.\nReturns the current state of FCW. This property must always return a valid state defined in ForwardCollisionWarningState or ErrorState. It must not surface errors through StatusCode and must use the supported error states instead.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both ForwardCollisionWarningState (including OTHER, which is not recommended) and ErrorState are supported.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} unless all states of both ForwardCollisionWarningState (including OTHER, which is not recommended) and ErrorState are supported. At boot, the supported values list is the same as supportedEnumValues."
+                "description": "Forward Collision Warning (FCW) state.\nReturns the current state of FCW. This property must always return a valid state defined in ForwardCollisionWarningState or ErrorState. It must not surface errors through StatusCode and must use the supported error states instead.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both ForwardCollisionWarningState (including OTHER, which is not recommended) and ErrorState are supported.\nIf {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0): {@code HasSupportedValueInfo#hasSupportedValuesList} must be {@code true}. At boot, supportedEnumValues (if defined) is equal to the supported values list."
             },
             {
                 "name": "BLIND_SPOT_WARNING_ENABLED",
@@ -1496,7 +1496,7 @@
                     "ErrorState"
                 ],
                 "data_enum": "BlindSpotWarningState",
-                "description": "Blind Spot Warning (BSW) state.\nReturns the current state of BSW. This property must always return a valid state defined in BlindSpotWarningState or ErrorState. It must not surface errors through StatusCode and must use the supported error states instead.\nFor each supported area ID, the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both BlindSpotWarningState (including OTHER, which is not recommended) and ErrorState are supported.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} unless all states of both BlindSpotWarningState (including OTHER, which is not recommended) and ErrorState are supported. At boot, the supported values list is the same as supportedEnumValues."
+                "description": "Blind Spot Warning (BSW) state.\nReturns the current state of BSW. This property must always return a valid state defined in BlindSpotWarningState or ErrorState. It must not surface errors through StatusCode and must use the supported error states instead.\nFor each supported area ID, the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both BlindSpotWarningState (including OTHER, which is not recommended) and ErrorState are supported.\nIf {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0): {@code HasSupportedValueInfo#hasSupportedValuesList} must be {@code true}. At boot, supportedEnumValues (if defined) is equal to the supported values list."
             },
             {
                 "name": "LANE_DEPARTURE_WARNING_ENABLED",
@@ -1511,7 +1511,7 @@
                     "ErrorState"
                 ],
                 "data_enum": "LaneDepartureWarningState",
-                "description": "Lane Departure Warning (LDW) state.\nReturns the current state of LDW. This property must always return a valid state defined in LaneDepartureWarningState or ErrorState. It must not surface errors through StatusCode and must use the supported error states instead.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both LaneDepartureWarningState (including OTHER, which is not recommended) and ErrorState are supported.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} unless all states of both LaneDepartureWarningState (including OTHER, which is not recommended) and ErrorState are supported. At boot, the supported values list is the same as supportedEnumValues."
+                "description": "Lane Departure Warning (LDW) state.\nReturns the current state of LDW. This property must always return a valid state defined in LaneDepartureWarningState or ErrorState. It must not surface errors through StatusCode and must use the supported error states instead.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both LaneDepartureWarningState (including OTHER, which is not recommended) and ErrorState are supported.\nIf {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0): {@code HasSupportedValueInfo#hasSupportedValuesList} must be {@code true}. At boot, supportedEnumValues (if defined) is equal to the supported values list."
             },
             {
                 "name": "LANE_KEEP_ASSIST_ENABLED",
@@ -1526,7 +1526,7 @@
                     "ErrorState"
                 ],
                 "data_enum": "LaneKeepAssistState",
-                "description": "Lane Keep Assist (LKA) state.\nReturns the current state of LKA. This property must always return a valid state defined in LaneKeepAssistState or ErrorState. It must not surface errors through StatusCode and must use the supported error states instead.\nIf LKA includes lane departure warnings before applying steering corrections, those warnings must be surfaced through the Lane Departure Warning (LDW) properties.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both LaneKeepAssistState (including OTHER, which is not recommended) and ErrorState are supported.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} unless all states of both LaneKeepAssistState (including OTHER, which is not recommended) and ErrorState are supported. At boot, the supported values list is the same as supportedEnumValues."
+                "description": "Lane Keep Assist (LKA) state.\nReturns the current state of LKA. This property must always return a valid state defined in LaneKeepAssistState or ErrorState. It must not surface errors through StatusCode and must use the supported error states instead.\nIf LKA includes lane departure warnings before applying steering corrections, those warnings must be surfaced through the Lane Departure Warning (LDW) properties.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both LaneKeepAssistState (including OTHER, which is not recommended) and ErrorState are supported.\nIf {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0): {@code HasSupportedValueInfo#hasSupportedValuesList} must be {@code true}. At boot, supportedEnumValues (if defined) is equal to the supported values list."
             },
             {
                 "name": "LANE_CENTERING_ASSIST_ENABLED",
@@ -1540,7 +1540,7 @@
                     "LaneCenteringAssistCommand"
                 ],
                 "data_enum": "LaneCenteringAssistCommand",
-                "description": "Lane Centering Assist (LCA) commands.\nCommands to activate and suspend LCA.\nWhen the command ACTIVATE from LaneCenteringAssistCommand is sent, LANE_CENTERING_ASSIST_STATE must be set to LaneCenteringAssistState#ACTIVATION_REQUESTED. When the ACTIVATE command succeeds, LANE_CENTERING_ASSIST_STATE must be set to LaneCenteringAssistState#ACTIVATED. When the command DEACTIVATE from LaneCenteringAssistCommand succeeds, LANE_CENTERING_ASSIST_STATE must be set to LaneCenteringAssistState#ENABLED.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues must be defined unless all enum values of LaneCenteringAssistCommand are supported.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} unless all enum values of LaneCenteringAssistCommand are supported. At boot, the supported values list is the same as supportedEnumValues.\nWhen this property is not available because LCA is disabled (i.e. LANE_CENTERING_ASSIST_ENABLED is false), this property must return StatusCode#NOT_AVAILABLE_DISABLED. If LANE_CENTERING_ASSIST_STATE is implemented and the state is set to an ErrorState value, then this property must return a StatusCode that aligns with the ErrorState value. For example, if LANE_CENTERING_ASSIST_STATE is set to ErrorState#NOT_AVAILABLE_SPEED_LOW, then this property must return StatusCode#NOT_AVAILABLE_SPEED_LOW."
+                "description": "Lane Centering Assist (LCA) commands.\nCommands to activate and suspend LCA.\nWhen the command ACTIVATE from LaneCenteringAssistCommand is sent, LANE_CENTERING_ASSIST_STATE must be set to LaneCenteringAssistState#ACTIVATION_REQUESTED. When the ACTIVATE command succeeds, LANE_CENTERING_ASSIST_STATE must be set to LaneCenteringAssistState#ACTIVATED. When the command DEACTIVATE from LaneCenteringAssistCommand succeeds, LANE_CENTERING_ASSIST_STATE must be set to LaneCenteringAssistState#ENABLED.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues must be defined unless all enum values of LaneCenteringAssistCommand are supported.\nIf {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0): {@code HasSupportedValueInfo#hasSupportedValuesList} must be {@code true}. At boot, supportedEnumValues (if defined) is equal to the supported values list.\nWhen this property is not available because LCA is disabled (i.e. LANE_CENTERING_ASSIST_ENABLED is false), this property must return StatusCode#NOT_AVAILABLE_DISABLED. If LANE_CENTERING_ASSIST_STATE is implemented and the state is set to an ErrorState value, then this property must return a StatusCode that aligns with the ErrorState value. For example, if LANE_CENTERING_ASSIST_STATE is set to ErrorState#NOT_AVAILABLE_SPEED_LOW, then this property must return StatusCode#NOT_AVAILABLE_SPEED_LOW."
             },
             {
                 "name": "LANE_CENTERING_ASSIST_STATE",
@@ -1550,7 +1550,7 @@
                     "ErrorState"
                 ],
                 "data_enum": "LaneCenteringAssistState",
-                "description": "Lane Centering Assist (LCA) state.\nReturns the current state of LCA. This property must always return a valid state defined in LaneCenteringAssistState or ErrorState. It must not surface errors through StatusCode and must use the supported error states instead.\nIf LCA includes lane departure warnings, those warnings must be surfaced through the Lane Departure Warning (LDW) properties.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both LaneCenteringAssistState (including OTHER, which is not recommended) and ErrorState are supported.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} unless all states of both LaneCenteringAssistState (including OTHER, which is not recommended) and ErrorState are supported. At boot, the supported values list is the same as supportedEnumValues."
+                "description": "Lane Centering Assist (LCA) state.\nReturns the current state of LCA. This property must always return a valid state defined in LaneCenteringAssistState or ErrorState. It must not surface errors through StatusCode and must use the supported error states instead.\nIf LCA includes lane departure warnings, those warnings must be surfaced through the Lane Departure Warning (LDW) properties.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both LaneCenteringAssistState (including OTHER, which is not recommended) and ErrorState are supported.\nIf {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0): {@code HasSupportedValueInfo#hasSupportedValuesList} must be {@code true}. At boot, supportedEnumValues (if defined) is equal to the supported values list."
             },
             {
                 "name": "EMERGENCY_LANE_KEEP_ASSIST_ENABLED",
@@ -1565,7 +1565,7 @@
                     "ErrorState"
                 ],
                 "data_enum": "EmergencyLaneKeepAssistState",
-                "description": "Emergency Lane Keep Assist (ELKA) state.\nReturns the current state of ELKA. Generally, this property should return a valid state defined in the EmergencyLaneKeepAssistState or ErrorState. For example, if the feature is not available due to some temporary state, that information should be conveyed through ErrorState.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of EmergencyLaneKeepAssistState (including OTHER, which is not recommended) and ErrorState are supported.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} unless all states of EmergencyLaneKeepAssistState (including OTHER, which is not recommended) and ErrorState are supported. At boot, the supported values list is the same as supportedEnumValues."
+                "description": "Emergency Lane Keep Assist (ELKA) state.\nReturns the current state of ELKA. Generally, this property should return a valid state defined in the EmergencyLaneKeepAssistState or ErrorState. For example, if the feature is not available due to some temporary state, that information should be conveyed through ErrorState.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of EmergencyLaneKeepAssistState (including OTHER, which is not recommended) and ErrorState are supported.\nIf {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0): {@code HasSupportedValueInfo#hasSupportedValuesList} must be {@code true}. At boot, supportedEnumValues (if defined) is equal to the supported values list."
             },
             {
                 "name": "CRUISE_CONTROL_ENABLED",
@@ -1580,7 +1580,7 @@
                     "ErrorState"
                 ],
                 "data_enum": "CruiseControlType",
-                "description": "Current type of Cruise Control (CC).\nWhen CRUISE_CONTROL_ENABLED is true, this property returns the type of CC that is currently enabled (for example, standard CC, adaptive CC, predictive CC, etc.). Generally, this property should return a valid state defined in the CruiseControlType or ErrorState. For example, if the feature is not available due to some temporary state, that information should be conveyed through ErrorState.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of CruiseControlType (including OTHER, which is not recommended) and ErrorState are supported.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} unless all states of CruiseControlType (including OTHER, which is not recommended) and ErrorState are supported. At boot, the supported values list is the same as supportedEnumValues.\nTrying to write CruiseControlType#OTHER or an ErrorState to this property will throw an IllegalArgumentException.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Current type of Cruise Control (CC).\nWhen CRUISE_CONTROL_ENABLED is true, this property returns the type of CC that is currently enabled (for example, standard CC, adaptive CC, predictive CC, etc.). Generally, this property should return a valid state defined in the CruiseControlType or ErrorState. For example, if the feature is not available due to some temporary state, that information should be conveyed through ErrorState.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of CruiseControlType (including OTHER, which is not recommended) and ErrorState are supported.\nIf {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0): {@code HasSupportedValueInfo#hasSupportedValuesList} must be {@code true}. At boot, supportedEnumValues (if defined) is equal to the supported values list.\nTrying to write CruiseControlType#OTHER or an ErrorState to this property will throw an IllegalArgumentException.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "CRUISE_CONTROL_STATE",
@@ -1590,7 +1590,7 @@
                     "ErrorState"
                 ],
                 "data_enum": "CruiseControlState",
-                "description": "Current state of Cruise Control (CC).\nThis property returns the current state of CC. Generally, this property should return a valid state defined in the CruiseControlState or ErrorState. For example, if the feature is not available due to some temporary state, that information should be conveyed through ErrorState.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of CruiseControlState (including OTHER, which is not recommended) and ErrorState are supported.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} unless all states of CruiseControlState (including OTHER, which is not recommended) and ErrorState are supported. At boot, the supported values list is the same as supportedEnumValues."
+                "description": "Current state of Cruise Control (CC).\nThis property returns the current state of CC. Generally, this property should return a valid state defined in the CruiseControlState or ErrorState. For example, if the feature is not available due to some temporary state, that information should be conveyed through ErrorState.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of CruiseControlState (including OTHER, which is not recommended) and ErrorState are supported.\nIf {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0): {@code HasSupportedValueInfo#hasSupportedValuesList} must be {@code true}. At boot, supportedEnumValues (if defined) is equal to the supported values list."
             },
             {
                 "name": "CRUISE_CONTROL_COMMAND",
@@ -1599,22 +1599,22 @@
                     "CruiseControlCommand"
                 ],
                 "data_enum": "CruiseControlCommand",
-                "description": "Write Cruise Control (CC) commands.\nSee CruiseControlCommand for the details about each supported command.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of CruiseControlState are supported. Any unsupported commands sent through this property must return StatusCode#INVALID_ARG.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} unless all states of CruiseControlState are supported. At boot, the supported values list is the same as supportedEnumValues.\nWhen this property is not available because CC is disabled (i.e. CRUISE_CONTROL_ENABLED is false), this property must return StatusCode#NOT_AVAILABLE_DISABLED. If CRUISE_CONTROL_STATE is implemented and the state is set to an ErrorState value, then this property must return a StatusCode that aligns with the ErrorState value. For example, if CRUISE_CONTROL_STATE is set to ErrorState#NOT_AVAILABLE_SPEED_LOW, then this property must return StatusCode#NOT_AVAILABLE_SPEED_LOW."
+                "description": "Write Cruise Control (CC) commands.\nSee CruiseControlCommand for the details about each supported command.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of CruiseControlState are supported. Any unsupported commands sent through this property must return StatusCode#INVALID_ARG.\nIf {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0): {@code HasSupportedValueInfo#hasSupportedValuesList} must be {@code true}. At boot, supportedEnumValues (if defined) is equal to the supported values list.\nWhen this property is not available because CC is disabled (i.e. CRUISE_CONTROL_ENABLED is false), this property must return StatusCode#NOT_AVAILABLE_DISABLED. If CRUISE_CONTROL_STATE is implemented and the state is set to an ErrorState value, then this property must return a StatusCode that aligns with the ErrorState value. For example, if CRUISE_CONTROL_STATE is set to ErrorState#NOT_AVAILABLE_SPEED_LOW, then this property must return StatusCode#NOT_AVAILABLE_SPEED_LOW."
             },
             {
                 "name": "CRUISE_CONTROL_TARGET_SPEED",
                 "value": 291508243,
-                "description": "Current target speed for Cruise Control (CC).\nOEMs should set the minFloatValue and maxFloatValue values for this property to define the min and max target speed values. These values must be non-negative.\nThe maxFloatValue represents the upper bound of the target speed. The minFloatValue represents the lower bound of the target speed.\nWhen this property is not available because CC is disabled (i.e. CRUISE_CONTROL_ENABLED is false), this property must return StatusCode#NOT_AVAILABLE_DISABLED. If CRUISE_CONTROL_STATE is implemented and the state is set to an ErrorState value, then this property must return a StatusCode that aligns with the ErrorState value. For example, if CRUISE_CONTROL_STATE is set to ErrorState#NOT_AVAILABLE_SPEED_LOW, then this property must return StatusCode#NOT_AVAILABLE_SPEED_LOW."
+                "description": "Current target speed for Cruise Control (CC).\nOEMs should set the minFloatValue and maxFloatValue values for this property to define the min and max target speed values. These values must be non-negative.\nThe minFloatValue represents the lower bound of the target speed.\nThe maxFloatValue represents the upper bound of the target speed.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo#hasMinSupportedValue} and {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true}. {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minFloatValue. {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxFloatValue.\nWhen this property is not available because CC is disabled (i.e. CRUISE_CONTROL_ENABLED is false), this property must return StatusCode#NOT_AVAILABLE_DISABLED. If CRUISE_CONTROL_STATE is implemented and the state is set to an ErrorState value, then this property must return a StatusCode that aligns with the ErrorState value. For example, if CRUISE_CONTROL_STATE is set to ErrorState#NOT_AVAILABLE_SPEED_LOW, then this property must return StatusCode#NOT_AVAILABLE_SPEED_LOW."
             },
             {
                 "name": "ADAPTIVE_CRUISE_CONTROL_TARGET_TIME_GAP",
                 "value": 289411092,
-                "description": "Current target time gap for Adaptive Cruise Control (ACC) or Predictive Cruise Control in milliseconds.\nThis property should specify the target time gap to a leading vehicle. This gap is defined as the time to travel the distance between the leading vehicle's rear-most point to the ACC vehicle's front-most point. The actual time gap from a leading vehicle can be above or below this value.\nThe possible values to set for the target time gap should be specified in configArray in ascending order. All values must be positive. If the property is writable, all values must be writable.\nWhen this property is not available because CC is disabled (i.e. CRUISE_CONTROL_ENABLED is false), this property must return StatusCode#NOT_AVAILABLE_DISABLED. If CRUISE_CONTROL_STATE is implemented and the state is set to an ErrorState value, then this property must return a StatusCode that aligns with the ErrorState value. For example, if CRUISE_CONTROL_STATE is set to ErrorState#NOT_AVAILABLE_SPEED_LOW, then this property must return StatusCode#NOT_AVAILABLE_SPEED_LOW.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Current target time gap for Adaptive Cruise Control (ACC) or Predictive Cruise Control in milliseconds.\nThis property should specify the target time gap to a leading vehicle. This gap is defined as the time to travel the distance between the leading vehicle's rear-most point to the ACC vehicle's front-most point. The actual time gap from a leading vehicle can be above or below this value.\nThe possible values to set for the target time gap at boot time should be specified in configArray in ascending order. All values must be positive. If the property is writable, all values must be writable.\nIf {@code HasSupportedValueInfo} is not {@code null}, {@code HasSupportedValueInfo#hasSupportedValuesList} must be {@code true}. The supported values list represents the possible values to set at the current moment.\nIf the possible values to set may change dynamically, {@code HasSupportedValueInfo#hasSupportedValuesList} must be {@code true} and the supported values list must be implemented.\nWhen this property is not available because CC is disabled (i.e. CRUISE_CONTROL_ENABLED is false), this property must return StatusCode#NOT_AVAILABLE_DISABLED. If CRUISE_CONTROL_STATE is implemented and the state is set to an ErrorState value, then this property must return a StatusCode that aligns with the ErrorState value. For example, if CRUISE_CONTROL_STATE is set to ErrorState#NOT_AVAILABLE_SPEED_LOW, then this property must return StatusCode#NOT_AVAILABLE_SPEED_LOW.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "ADAPTIVE_CRUISE_CONTROL_LEAD_VEHICLE_MEASURED_DISTANCE",
                 "value": 289411093,
-                "description": "Measured distance from leading vehicle when using Adaptive Cruise Control (ACC) or Predictive Cruise Control.\nReturns the measured distance in millimeters between the rear-most point of the leading vehicle and the front-most point of the ACC vehicle.\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. The minInt32Value should be 0. The maxInt32Value should be populated with the maximum range the distance sensor can support. This value should be non-negative.\nWhen no lead vehicle is detected (that is, when there is no leading vehicle or the leading vehicle is too far away for the sensor to detect), this property should return StatusCode.NOT_AVAILABLE.\nWhen this property is not available because CC is disabled (i.e. CRUISE_CONTROL_ENABLED is false), this property must return StatusCode#NOT_AVAILABLE_DISABLED. If CRUISE_CONTROL_STATE is implemented and the state is set to an ErrorState value, then this property must return a StatusCode that aligns with the ErrorState value. For example, if CRUISE_CONTROL_STATE is set to ErrorState#NOT_AVAILABLE_SPEED_LOW, then this property must return StatusCode#NOT_AVAILABLE_SPEED_LOW."
+                "description": "Measured distance from leading vehicle when using Adaptive Cruise Control (ACC) or Predictive Cruise Control.\nReturns the measured distance in millimeters between the rear-most point of the leading vehicle and the front-most point of the ACC vehicle.\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined.\nThe minInt32Value should be 0.\nThe maxInt32Value should be populated with the maximum range the distance sensor can support. This value should be non-negative.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo#hasMinSupportedValue} and {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true}. {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value.\nWhen no lead vehicle is detected (that is, when there is no leading vehicle or the leading vehicle is too far away for the sensor to detect), this property should return StatusCode.NOT_AVAILABLE.\nWhen this property is not available because CC is disabled (i.e. CRUISE_CONTROL_ENABLED is false), this property must return StatusCode#NOT_AVAILABLE_DISABLED. If CRUISE_CONTROL_STATE is implemented and the state is set to an ErrorState value, then this property must return a StatusCode that aligns with the ErrorState value. For example, if CRUISE_CONTROL_STATE is set to ErrorState#NOT_AVAILABLE_SPEED_LOW, then this property must return StatusCode#NOT_AVAILABLE_SPEED_LOW."
             },
             {
                 "name": "HANDS_ON_DETECTION_ENABLED",
@@ -1629,7 +1629,7 @@
                     "ErrorState"
                 ],
                 "data_enum": "HandsOnDetectionDriverState",
-                "description": "Hands On Detection (HOD) driver state.\nReturns whether the driver's hands are on the steering wheel. Generally, this property should return a valid state defined in the HandsOnDetectionDriverState or ErrorState. For example, if the feature is not available due to some temporary state, that information should be conveyed through ErrorState.\nIf the vehicle wants to send a warning to the user because the driver's hands have been off the steering wheel for too long, the warning should be surfaced through HANDS_ON_DETECTION_WARNING.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both HandsOnDetectionDriverState (including OTHER, which is not recommended) and ErrorState are supported.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} unless all states of both HandsOnDetectionDriverState (including OTHER, which is not recommended) and ErrorState are supported. At boot, the supported values list is the same as supportedEnumValues."
+                "description": "Hands On Detection (HOD) driver state.\nReturns whether the driver's hands are on the steering wheel. Generally, this property should return a valid state defined in the HandsOnDetectionDriverState or ErrorState. For example, if the feature is not available due to some temporary state, that information should be conveyed through ErrorState.\nIf the vehicle wants to send a warning to the user because the driver's hands have been off the steering wheel for too long, the warning should be surfaced through HANDS_ON_DETECTION_WARNING.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both HandsOnDetectionDriverState (including OTHER, which is not recommended) and ErrorState are supported.\nIf {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0): {@code HasSupportedValueInfo#hasSupportedValuesList} must be {@code true}. At boot, supportedEnumValues (if defined) is equal to the supported values list."
             },
             {
                 "name": "HANDS_ON_DETECTION_WARNING",
@@ -1639,7 +1639,7 @@
                     "ErrorState"
                 ],
                 "data_enum": "HandsOnDetectionWarning",
-                "description": "Hands On Detection (HOD) warning.\nReturns whether a warning is being sent to the driver for having their hands off the wheel for too long a duration.\nGenerally, this property should return a valid state defined in HandsOnDetectionWarning or ErrorState. For example, if the feature is not available due to some temporary state, that information should be conveyed through an ErrorState.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both HandsOnDetectionWarning (including OTHER, which is not recommended) and ErrorState are supported.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} unless all states of both HandsOnDetectionWarning (including OTHER, which is not recommended) and ErrorState are supported. At boot, the supported values list is the same as supportedEnumValues."
+                "description": "Hands On Detection (HOD) warning.\nReturns whether a warning is being sent to the driver for having their hands off the wheel for too long a duration.\nGenerally, this property should return a valid state defined in HandsOnDetectionWarning or ErrorState. For example, if the feature is not available due to some temporary state, that information should be conveyed through an ErrorState.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both HandsOnDetectionWarning (including OTHER, which is not recommended) and ErrorState are supported.\nIf {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0): {@code HasSupportedValueInfo#hasSupportedValuesList} must be {@code true}. At boot, supportedEnumValues (if defined) is equal to the supported values list."
             },
             {
                 "name": "DRIVER_DROWSINESS_ATTENTION_SYSTEM_ENABLED",
@@ -1654,7 +1654,7 @@
                     "ErrorState"
                 ],
                 "data_enum": "DriverDrowsinessAttentionState",
-                "description": "Driver drowsiness and attention level state.\nReturns the current detected state of driver drowiness and attention level based on the Karolinska Sleepiness scale. If alternative measurement methods are used, the value should be translated to the Karolinska Sleepiness Scale equivalent.\nGenerally, this property should return a valid state defined in the DriverDrowsinessAttentionState or ErrorState. For example, if the feature is not available due to some temporary state, that information should be conveyed through ErrorState.\nIf the vehicle is sending a warning to the user because the driver is too drowsy, the warning should be surfaced through {@link #DRIVER_DROWSINESS_ATTENTION_WARNING}.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both DriverDrowsinessAttentionState (including OTHER, which is not recommended) and ErrorState are supported.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} unless all states of both DriverDrowsinessAttentionState (including OTHER, which is not recommended) and ErrorState are supported. At boot, the supported values list is the same as supportedEnumValues."
+                "description": "Driver drowsiness and attention level state.\nReturns the current detected state of driver drowiness and attention level based on the Karolinska Sleepiness scale. If alternative measurement methods are used, the value should be translated to the Karolinska Sleepiness Scale equivalent.\nGenerally, this property should return a valid state defined in the DriverDrowsinessAttentionState or ErrorState. For example, if the feature is not available due to some temporary state, that information should be conveyed through ErrorState.\nIf the vehicle is sending a warning to the user because the driver is too drowsy, the warning should be surfaced through {@link #DRIVER_DROWSINESS_ATTENTION_WARNING}.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both DriverDrowsinessAttentionState (including OTHER, which is not recommended) and ErrorState are supported.\nIf {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0): {@code HasSupportedValueInfo#hasSupportedValuesList} must be {@code true}. At boot, supportedEnumValues (if defined) is equal to the supported values list."
             },
             {
                 "name": "DRIVER_DROWSINESS_ATTENTION_WARNING_ENABLED",
@@ -1669,7 +1669,7 @@
                     "ErrorState"
                 ],
                 "data_enum": "DriverDrowsinessAttentionWarning",
-                "description": "Driver drowsiness and attention warning.\nReturns whether a warning is being sent to the driver for being drowsy or not attentive.\nGenerally, this property should return a valid state defined in DriverDrowsinessAttentionWarning or ErrorState. For example, if the feature is not available due to some temporary state, that information should be conveyed through an ErrorState.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both DriverDrowsinessAttentionWarning (including OTHER, which is not recommended) and ErrorState are supported.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} unless all states of both DriverDrowsinessAttentionWarning (including OTHER, which is not recommended) and ErrorState are supported. At boot, the supported values list is the same as supportedEnumValues."
+                "description": "Driver drowsiness and attention warning.\nReturns whether a warning is being sent to the driver for being drowsy or not attentive.\nGenerally, this property should return a valid state defined in DriverDrowsinessAttentionWarning or ErrorState. For example, if the feature is not available due to some temporary state, that information should be conveyed through an ErrorState.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both DriverDrowsinessAttentionWarning (including OTHER, which is not recommended) and ErrorState are supported.\nIf {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0): {@code HasSupportedValueInfo#hasSupportedValuesList} must be {@code true}. At boot, supportedEnumValues (if defined) is equal to the supported values list."
             },
             {
                 "name": "DRIVER_DISTRACTION_SYSTEM_ENABLED",
@@ -1684,7 +1684,7 @@
                     "ErrorState"
                 ],
                 "data_enum": "DriverDistractionState",
-                "description": "Driver distraction state.\nReturns the current detected driver distraction state.\nGenerally, this property should return a valid state defined in the DriverDistractionState or ErrorState. For example, if the feature is not available due to some temporary state, that information should be conveyed through ErrorState.\nIf the vehicle is sending a warning to the user because the driver is too distracted, the warning should be surfaced through {@link #DRIVER_DISTRACTION_WARNING}.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both DriverDistractionState (including OTHER, which is not recommended) and ErrorState are supported.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} unless all states of both DriverDistractionState (including OTHER, which is not recommended) and ErrorState are supported. At boot, the supported values list is the same as supportedEnumValues."
+                "description": "Driver distraction state.\nReturns the current detected driver distraction state.\nGenerally, this property should return a valid state defined in the DriverDistractionState or ErrorState. For example, if the feature is not available due to some temporary state, that information should be conveyed through ErrorState.\nIf the vehicle is sending a warning to the user because the driver is too distracted, the warning should be surfaced through {@link #DRIVER_DISTRACTION_WARNING}.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both DriverDistractionState (including OTHER, which is not recommended) and ErrorState are supported.\nIf {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0): {@code HasSupportedValueInfo#hasSupportedValuesList} must be {@code true}. At boot, supportedEnumValues (if defined) is equal to the supported values list."
             },
             {
                 "name": "DRIVER_DISTRACTION_WARNING_ENABLED",
@@ -1699,7 +1699,7 @@
                     "ErrorState"
                 ],
                 "data_enum": "DriverDistractionWarning",
-                "description": "Driver distraction warning.\nReturns whether a warning is being sent to the driver for being distracted.\nGenerally, this property should return a valid state defined in DriverDistractionWarning or ErrorState. For example, if the feature is not available due to some temporary state, that information should be conveyed through an ErrorState.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both DriverDistractionWarning (including OTHER, which is not recommended) and ErrorState are supported.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} unless all states of both DriverDistractionWarning (including OTHER, which is not recommended) and ErrorState are supported. At boot, the supported values list is the same as supportedEnumValues."
+                "description": "Driver distraction warning.\nReturns whether a warning is being sent to the driver for being distracted.\nGenerally, this property should return a valid state defined in DriverDistractionWarning or ErrorState. For example, if the feature is not available due to some temporary state, that information should be conveyed through an ErrorState.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both DriverDistractionWarning (including OTHER, which is not recommended) and ErrorState are supported.\nIf {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0): {@code HasSupportedValueInfo#hasSupportedValuesList} must be {@code true}. At boot, supportedEnumValues (if defined) is equal to the supported values list."
             },
             {
                 "name": "LOW_SPEED_COLLISION_WARNING_ENABLED",
@@ -1714,7 +1714,7 @@
                     "ErrorState"
                 ],
                 "data_enum": "LowSpeedCollisionWarningState",
-                "description": "Low Speed Collision Warning state.\nReturns the current state of Low Speed Collision Warning. This property must always return a valid state defined in LowSpeedCollisionWarningState or ErrorState. It must not surface errors through StatusCode and must use the supported error states instead. This property is different from the pre-existing FORWARD_COLLISION_WARNING_STATE, which should apply to higher speed applications only. If the vehicle doesn't have a separate collision detection system for low speed environments, this property should not be implemented.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both LowSpeedCollisionWarningState (including OTHER, which is not recommended) and ErrorState are supported.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} unless all states of both LowSpeedCollisionWarningState (including OTHER, which is not recommended) and ErrorState are supported. At boot, the supported values list is the same as supportedEnumValues."
+                "description": "Low Speed Collision Warning state.\nReturns the current state of Low Speed Collision Warning. This property must always return a valid state defined in LowSpeedCollisionWarningState or ErrorState. It must not surface errors through StatusCode and must use the supported error states instead. This property is different from the pre-existing FORWARD_COLLISION_WARNING_STATE, which should apply to higher speed applications only. If the vehicle doesn't have a separate collision detection system for low speed environments, this property should not be implemented.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both LowSpeedCollisionWarningState (including OTHER, which is not recommended) and ErrorState are supported.\nIf {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0): {@code HasSupportedValueInfo#hasSupportedValuesList} must be {@code true}. At boot, supportedEnumValues (if defined) is equal to the supported values list."
             },
             {
                 "name": "CROSS_TRAFFIC_MONITORING_ENABLED",
@@ -1729,7 +1729,7 @@
                     "ErrorState"
                 ],
                 "data_enum": "CrossTrafficMonitoringWarningState",
-                "description": "Cross Traffic Monitoring warning state.\nReturns the current state of Cross Traffic Monitoring Warning. This property must always return a valid state defined in CrossTrafficMonitoringWarningState or ErrorState. It must not surface errors through StatusCode and must use the supported error states instead.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both CrossTrafficMonitoringWarningState (including OTHER, which is not recommended) and ErrorState are supported.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} unless all states of both CrossTrafficMonitoringWarningState (including OTHER, which is not recommended) and ErrorState are supported. At boot, the supported values list is the same as supportedEnumValues."
+                "description": "Cross Traffic Monitoring warning state.\nReturns the current state of Cross Traffic Monitoring Warning. This property must always return a valid state defined in CrossTrafficMonitoringWarningState or ErrorState. It must not surface errors through StatusCode and must use the supported error states instead.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both CrossTrafficMonitoringWarningState (including OTHER, which is not recommended) and ErrorState are supported.\nIf {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0): {@code HasSupportedValueInfo#hasSupportedValuesList} must be {@code true}. At boot, supportedEnumValues (if defined) is equal to the supported values list."
             },
             {
                 "name": "LOW_SPEED_AUTOMATIC_EMERGENCY_BRAKING_ENABLED",
@@ -1744,7 +1744,7 @@
                     "ErrorState"
                 ],
                 "data_enum": "LowSpeedAutomaticEmergencyBrakingState",
-                "description": "Low Speed Automatic Emergency Braking state.\nReturns the current state of Low Speed Automatic Emergency Braking. This property must always return a valid state defined in LowSpeedAutomaticEmergencyBrakingState or ErrorState. It must not surface errors through StatusCode and must use the supported error states instead. This property is different from the pre-existing AUTOMATIC_EMERGENCY_BRAKING_STATE, which should apply to higher speed applications only. If the vehicle doesn't have a separate collision avoidance system for low speed environments, this property should not be implemented.\nIf Low Speed Automatic Emergency Braking includes collision warnings before activating the brakes, those warnings must be surfaced through use of LOW_SPEED_COLLISION_WARNING_ENABLED and LOW_SPEED_COLLISION_WARNING_STATE.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both LowSpeedAutomaticEmergencyBrakingState (including OTHER, which is not recommended) and ErrorState are supported.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} unless all states of both LowSpeedAutomaticEmergencyBrakingState (including OTHER, which is not recommended) and ErrorState are supported. At boot, the supported values list is the same as supportedEnumValues."
+                "description": "Low Speed Automatic Emergency Braking state.\nReturns the current state of Low Speed Automatic Emergency Braking. This property must always return a valid state defined in LowSpeedAutomaticEmergencyBrakingState or ErrorState. It must not surface errors through StatusCode and must use the supported error states instead. This property is different from the pre-existing AUTOMATIC_EMERGENCY_BRAKING_STATE, which should apply to higher speed applications only. If the vehicle doesn't have a separate collision avoidance system for low speed environments, this property should not be implemented.\nIf Low Speed Automatic Emergency Braking includes collision warnings before activating the brakes, those warnings must be surfaced through use of LOW_SPEED_COLLISION_WARNING_ENABLED and LOW_SPEED_COLLISION_WARNING_STATE.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both LowSpeedAutomaticEmergencyBrakingState (including OTHER, which is not recommended) and ErrorState are supported.\nIf {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0): {@code HasSupportedValueInfo#hasSupportedValuesList} must be {@code true}. At boot, supportedEnumValues (if defined) is equal to the supported values list."
             }
         ]
     },
diff --git a/automotive/vehicle/aidl_property/android/hardware/automotive/vehicle/VehicleProperty.aidl b/automotive/vehicle/aidl_property/android/hardware/automotive/vehicle/VehicleProperty.aidl
index 856d38c..52e3096 100644
--- a/automotive/vehicle/aidl_property/android/hardware/automotive/vehicle/VehicleProperty.aidl
+++ b/automotive/vehicle/aidl_property/android/hardware/automotive/vehicle/VehicleProperty.aidl
@@ -37,6 +37,51 @@
  *
  * Properties set to values out of range must be ignored and no action taken
  * in response to such ill formed requests.
+ *
+ * Used custom annotation:
+ *
+ * change_mode:
+ * Required (except for INVALID). The change mode.
+ *
+ * access:
+ * Required (except for INVALID). The allowed access mode, can be specified multiple
+ * times to list multiple allowed access mode. Vendor must implement one of them.
+ *
+ * unit:
+ * Optional. the unit for the property.
+ *
+ * data_enum:
+ * Optional. If specified, the property is an enum-type property. Its value must be one of the
+ * enum values (unless it has data_enum_bit_flag annotation, see below). Can be specified multiple
+ * times to specify two separated enum types are supported.
+ *
+ * data_enum_bit_flag:
+ * Optional. Its value must be one or more enum values bit-ored together.
+ *
+ * version:
+ * Required (except for INVALID). Since which VHAL version is this property introduced in.
+ *
+ * require_min_max_supported_value:
+ * Optional. The property must specify min value and max value for all supported area IDs in the
+ * vehicle area config.
+ * If {@code HasSupportedValueInfo} in the vehicle area config is not {@code null},
+ * {@code HasSupportedValueInfo.hasMinSupportedValue} and
+ * {@code HasSupportedValueInfo.hasMinSupportedValue} must be {@code true}.
+ *
+ * require_supported_values_list:
+ * Optional. The property must expose the supported values list through some way. If the property
+ * has data_enum annotation, it must specify {@code supportedEnumValues} in the vehicle area config
+ * unless all possible enum values (or all possible enum combination for data_enum_bit_flags) are
+ * supported.
+ * For certain properties, they must use the config array to specify supported values (see
+ * legacy_supported_values_in_config)
+ * If {@code HasSupportedValueInfo} in the vehicle area config is not {@code null},
+ * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true}.
+ *
+ * legacy_supported_values_in_config:
+ * For certain legacy properties, they must use config array to specify supported values. For
+ * properties introduced later than V4, this is no longer used since the supported values can
+ * be specified via {@code getSupportedValuesLists} instead.
  */
 @VintfStability
 @JavaDerive(toString=true)
@@ -621,10 +666,10 @@
      * }
      *
      * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
-     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
-     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
-     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minFloatValue.
-     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxFloatValue.
+     * {@code HasSupportedValueInfo#hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the area ID.
+     * {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minFloatValue.
+     * {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxFloatValue.
      * For example, if the recommended tire pressure of left_front tire is from 200.0 KILOPASCAL to
      * 240.0 KILOPASCAL, {@code getMinMaxSupportedValue} for
      * [propId=TIRE_PRESSURE, areaId=VehicleAreaWheel::LEFT_FRONT] must return a
@@ -736,17 +781,27 @@
      *   scenario, this property must be set to -20 for all wheels except for the front left, which
      *   must be set to 10.
      *
-     * HasSupportedValueInfo.hasMinSupportedValue and HasSupportedValueInfo.hasMaxSupportedValue
-     * must be true for all areas.
+     * {@code minInt32Value} and {@code maxInt32Value} in {@code VehicleAreaConfig} must be
+     * specified for all supported area IDs.
      *
-     * MinMaxSupportedValueResult.minSupportedValue represents the lower bound of the suspension
-     * height for the wheel at the specified area ID.
+     * {@code minInt32Value} represents the lower bound of the suspension height for the wheel at
+     * the specified area ID.
      *
-     * MinMaxSupportedValueResult.maxSupportedValue represents the upper bound of the suspension
-     * height for the wheel at the specified area ID.
+     * {@code maxInt32Value} represents the upper bound of the suspension height for the wheel at
+     * the specified area ID.
+     *
+     * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
+     * {@code HasSupportedValueInfo#hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the specified
+     * area ID.
+     * {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value.
+     * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
+     * maxSupportedValue.
      *
      * @change_mode VehiclePropertyChangeMode.CONTINUOUS
      * @access VehiclePropertyAccess.READ
+     * @require_min_max_supported_value
      * @version 4
      */
     VEHICLE_PASSIVE_SUSPENSION_HEIGHT =
@@ -778,13 +833,14 @@
      * unless all bit flags of ImpactSensorLocation are supported.
      *
      * If {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0):
-     * {@code getSupportedValuesList} must return a {@code SupportedValuesListResult} that contains
-     * supported values unless all bit flags of ImpactSensorLocation are supported.
-     * At boot, supportedEnumValues is equal to the supported values list.
+     * {@code HasSupportedValueInfo#hasSupportedValuesList} must be {@code true}.
+     * At boot, supportedEnumValues (if defined) is equal to the supported values list.
      *
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ
      * @data_enum ImpactSensorLocation
+     * @data_enum_bit_flags
+     * @require_supported_values_list
      * @version 3
      */
     IMPACT_DETECTED =
@@ -817,7 +873,7 @@
      * selected by the driver instead of simply GEAR_DRIVE.
      *
      * If {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0):
-     * {@code VehicleAreaConfig.HasSupportedValueInfo.hasSupportedValuesList} for the global area ID
+     * {@code VehicleAreaConfig.HasSupportedValueInfo#hasSupportedValuesList} for the global area ID
      * (0) must be {@code true}.
      * {@code getSupportedValuesList} for [GEAR_SELECTION, areaId=0] must return a
      * {@code SupportedValuesListResult} that contains non-null {@code supportedValuesList}.
@@ -853,7 +909,7 @@
      * same as that of the supported gears reported in GEAR_SELECTION.
      *
      * If {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0):
-     * {@code VehicleAreaConfig.HasSupportedValueInfo.hasSupportedValuesList} for the global area ID
+     * {@code VehicleAreaConfig.HasSupportedValueInfo#hasSupportedValuesList} for the global area ID
      * (0) must be {@code true}.
      * {@code getSupportedValuesList} for [GEAR_SELECTION, areaId=0] must return a
      * {@code SupportedValuesListResult} that contains non-null {@code supportedValuesList}.
@@ -918,10 +974,10 @@
      * All values between min and max supported value must be supported.
      *
      * If {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0):
-     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
-     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for global area ID(0)
-     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
-     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * {@code HasSupportedValueInfo#hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for global area ID(0)
+     * {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value.
      * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
      * maxSupportedValue.
      *
@@ -1030,10 +1086,8 @@
      * all enum values of EvStoppingMode are supported.
      *
      * If {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0):
-     * For the global area ID (0), {@code getSupportedValuesList}
-     * must return a {@code SupportedValuesListResult} that contains supported values unless all
-     * enum values of EvStoppingMode are supported.
-     * At boot, supportedEnumValues is equal to the supported values list.
+     * {@code HasSupportedValueInfo#hasSupportedValuesList} must be {@code true}.
+     * At boot, supportedEnumValues (if defined) is equal to the supported values list.
      *
      * The EvStoppingMode enum may be extended to include more states in the future.
      *
@@ -1044,6 +1098,7 @@
      * @access VehiclePropertyAccess.READ_WRITE
      * @access VehiclePropertyAccess.READ
      * @data_enum EvStoppingMode
+     * @require_supported_values_list
      * @version 2
      */
     EV_STOPPING_MODE =
@@ -1082,16 +1137,14 @@
      * recommended) and ErrorState are supported.
      *
      * If {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0):
-     * For the global area ID (0), {@code getSupportedValuesList}
-     * must return a {@code SupportedValuesListResult} that contains supported values unless all
-     * states of both ElectronicStabilityControlState (including OTHER, which is not
-     * recommended) and ErrorState are supported.
-     * At boot, supportedEnumValues is equal to the supported values list.
+     * {@code HasSupportedValueInfo#hasSupportedValuesList} must be {@code true}.
+     * At boot, supportedEnumValues (if defined) is equal to the supported values list.
      *
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ
      * @data_enum ElectronicStabilityControlState
      * @data_enum ErrorState
+     * @require_supported_values_list
      * @version 3
      */
     ELECTRONIC_STABILITY_CONTROL_STATE =
@@ -1124,6 +1177,7 @@
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ
      * @data_enum VehicleTurnSignal
+     * @data_enum_bit_flags
      * @version 4
      */
     TURN_SIGNAL_LIGHT_STATE =
@@ -1207,11 +1261,11 @@
      * The maxInt32Value indicates the highest fan speed.
      *
      * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
-     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
-     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the specific
+     * {@code HasSupportedValueInfo#hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the specific
      * area ID.
-     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
-     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value.
      * All integers between minSupportedValue and maxSupportedValue must be supported.
      * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
      * maxSupportedValue.
@@ -1304,13 +1358,13 @@
      * Any value set in between a valid value should be rounded to the closest valid value.
      *
      * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
-     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
-     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the specific
+     * {@code HasSupportedValueInfo#hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the specific
      * area ID.
-     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minFloatValue.
-     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxFloatValue.
+     * {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minFloatValue.
+     * {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxFloatValue.
      * If not all the values between minSupportedValue and maxSupportedValue are supported,
-     * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} for the
+     * {@code HasSupportedValueInfo#hasSupportedValuesList} must be {@code true} for the
      * specified area ID. At boot, supportedValuesList must be equal to what is described in
      * config array.
      * At boot, minFloatValue is equal to minSupportedValue, maxFloatValue is equal to
@@ -1355,7 +1409,6 @@
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ_WRITE
      * @access VehiclePropertyAccess.READ
-     * @config_flags Supported areaIds
      * @version 2
      */
     HVAC_AC_ON = 0x0505 + 0x10000000 + 0x05000000
@@ -1495,11 +1548,11 @@
      * The maxInt32Value indicates the maximum seat temperature heating setting.
      *
      * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
-     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
-     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the specified
+     * {@code HasSupportedValueInfo#hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the specified
      * area ID.
-     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
-     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value.
      * All integers between minSupportedValue and maxSupportedValue must be supported.
      * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
      * maxSupportedValue.
@@ -1531,11 +1584,11 @@
      * The maxInt32Value in the config data represents the maximum heating level.
      *
      * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
-     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
-     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the specified
+     * {@code HasSupportedValueInfo#hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the specified
      * area ID.
-     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
-     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value.
      * All integers between minSupportedValue and maxSupportedValue must be supported.
      * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
      * maxSupportedValue.
@@ -1568,10 +1621,10 @@
      * The maxInt32Value indicates the maximum steering wheel heating setting.
      *
      * If {@code HasSupportedValueInfo} is not null for the global area ID (0):
-     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
-     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true}.
-     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
-     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * {@code HasSupportedValueInfo#hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true}.
+     * {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value.
      * All integers between minSupportedValue and maxSupportedValue must be supported.
      * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
      * maxSupportedValue.
@@ -1600,7 +1653,7 @@
      *              configArray[1] = FAHRENHEIT
      *
      * If {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0):
-     * {@code VehicleAreaConfig.HasSupportedValueInfo.hasSupportedValuesList} for the global area ID
+     * {@code VehicleAreaConfig.HasSupportedValueInfo#hasSupportedValuesList} for the global area ID
      * (0) must be {@code true}.
      * {@code getSupportedValuesLists} for [HVAC_TEMPERATURE_DISPLAY_UNITS, areaId=0] must return a
      * {@code SupportedValuesListResult} that contains non-null {@code supportedValuesList},
@@ -1699,6 +1752,7 @@
      * @change_mode VehiclePropertyChangeMode.STATIC
      * @access VehiclePropertyAccess.READ
      * @data_enum VehicleHvacFanDirection
+     * @data_enum_bit_flags
      * @version 2
      */
     HVAC_FAN_DIRECTION_AVAILABLE = 0x0511 + 0x10000000 + 0x05000000
@@ -1732,11 +1786,11 @@
      * The maxInt32Value indicates the maximum ventilation setting available for the seat.
      *
      * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
-     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
-     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the specified
+     * {@code HasSupportedValueInfo#hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the specified
      * area ID.
-     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
-     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value.
      * All integers between minSupportedValue and maxSupportedValue must be supported.
      * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
      * maxSupportedValue.
@@ -1841,7 +1895,7 @@
      *              configArray[2] = MILE
      *
      * If {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0):
-     * {@code VehicleAreaConfig.HasSupportedValueInfo.hasSupportedValuesList} for the global area ID
+     * {@code VehicleAreaConfig.HasSupportedValueInfo#hasSupportedValuesList} for the global area ID
      * (0) must be {@code true}.
      * {@code getSupportedValuesLists} for [DISTANCE_DISPLAY_UNITS, areaId=0] must returns a
      * {@code SupportedValuesListResult} that contains non-null {@code supportedValuesList},
@@ -1876,7 +1930,7 @@
      *              configArray[1] = GALLON
      *
      * If {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0):
-     * {@code VehicleAreaConfig.HasSupportedValueInfo.hasSupportedValuesList} for the global area ID
+     * {@code VehicleAreaConfig.HasSupportedValueInfo#hasSupportedValuesList} for the global area ID
      * (0) must be {@code true}.
      * {@code getSupportedValuesLists} for [FUEL_VOLUME_DISPLAY_UNITS, areaId=0] must return a
      * {@code SupportedValuesListResult} that contains non-null {@code supportedValuesList},
@@ -1912,7 +1966,7 @@
      *              configArray[2] = BAR
      *
      * If {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0):
-     * {@code VehicleAreaConfig.HasSupportedValueInfo.hasSupportedValuesList} for the global area ID
+     * {@code VehicleAreaConfig.HasSupportedValueInfo#hasSupportedValuesList} for the global area ID
      * (0) must be {@code true}.
      * {@code getSupportedValuesLists} for [TIRE_PRESSURE_DISPLAY_UNITS, areaId=0] must return a
      * {@code SupportedValuesListResult} that contains non-null {@code supportedValuesList},
@@ -1948,7 +2002,7 @@
      *              configArray[2] = KILOWATT_HOUR
      *
      * If {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0):
-     * {@code VehicleAreaConfig.HasSupportedValueInfo.hasSupportedValuesList} for the global area ID
+     * {@code VehicleAreaConfig.HasSupportedValueInfo#hasSupportedValuesList} for the global area ID
      * (0) must be {@code true}.
      * {@code getSupportedValuesLists} for [EV_BATTERY_DISPLAY_UNITS, areaId=0] must return a
      * {@code SupportedValuesListResult} that contains non-null {@code supportedValuesList},
@@ -2000,7 +2054,7 @@
      *              configArray[2] = KILOMETERS_PER_HOUR
      *
      * If {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0):
-     * {@code VehicleAreaConfig.HasSupportedValueInfo.hasSupportedValuesList} for the global area ID
+     * {@code VehicleAreaConfig.HasSupportedValueInfo#hasSupportedValuesList} for the global area ID
      * (0) must be {@code true}.
      * {@code getSupportedValuesLists} for [VEHICLE_SPEED_DISPLAY_UNITS, areaId=0] must return a
      * {@code SupportedValuesListResult} that contains non-null {@code supportedValuesList},
@@ -2297,7 +2351,6 @@
      *
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ
-     * @config_flags
      * @version 2
      */
     HW_KEY_INPUT = 0x0A10 + 0x10000000 + 0x01000000
@@ -2320,7 +2373,6 @@
      *
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ
-     * @config_flags
      * @version 2
      */
     HW_KEY_INPUT_V2 =
@@ -2355,7 +2407,6 @@
      *
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ
-     * @config_flags
      * @version 2
      */
     HW_MOTION_INPUT =
@@ -2408,6 +2459,7 @@
      */
     HW_CUSTOM_INPUT = 0X0A30 + 0x10000000 + 0x01000000
             + 0x00410000, // VehiclePropertyGroup:SYSTEM,VehicleArea:GLOBAL,VehiclePropertyType:INT32_VEC
+
     /***************************************************************************
      * Most Car Cabin properties have both a POSition and MOVE parameter.  These
      * are used to control the various movements for seats, doors, and windows
@@ -2440,10 +2492,10 @@
      * closed and fully open positions.
      *
      * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
-     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
-     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
-     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
-     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * {@code HasSupportedValueInfo#hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the area ID.
+     * {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value.
      * All integers between minSupportedValue and maxSupportedValue must be supported.
      * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
      * maxSupportedValue.
@@ -2479,10 +2531,10 @@
      * currently 0, then that means there is no movement currently occurring.
      *
      * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
-     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
-     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
-     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
-     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * {@code HasSupportedValueInfo#hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the area ID.
+     * {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value.
      * All integers between minSupportedValue and maxSupportedValue must be supported.
      * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
      * maxSupportedValue.
@@ -2551,10 +2603,10 @@
      * fully downward and fully upwards positions.
      *
      * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
-     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
-     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
-     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
-     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * {@code HasSupportedValueInfo#hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the area ID.
+     * {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value.
      * All integers between minSupportedValue and maxSupportedValue must be supported.
      * Values in between minSupportedValue and maxSupportedValue indicate a transition state between
      * the fully downward and fully upwards positions.
@@ -2590,10 +2642,10 @@
      * is currently 0, then that means there is no movement currently occurring.
      *
      * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
-     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
-     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
-     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
-     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * {@code HasSupportedValueInfo#hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the area ID.
+     * {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value.
      * All integers between minSupportedValue and maxSupportedValue must be supported.
      * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
      * maxSupportedValue.
@@ -2630,10 +2682,10 @@
      * left extreme and right extreme positions.
      *
      * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
-     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
-     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
-     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
-     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * {@code HasSupportedValueInfo#hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the area ID.
+     * {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value.
      * All integers between minSupportedValue and maxSupportedValue must be supported.
      * Values in between minSupportedValue and maxSupportedValue indicate a transition state between
      * the fully downward and fully upwards positions.
@@ -2668,10 +2720,10 @@
      * is currently 0, then that means there is no movement currently occurring.
      *
      * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
-     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
-     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
-     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
-     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * {@code HasSupportedValueInfo#hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the area ID.
+     * {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value.
      * All integers between minSupportedValue and maxSupportedValue must be supported.
      * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
      * maxSupportedValue.
@@ -2736,7 +2788,6 @@
      * @access VehiclePropertyAccess.READ
      * @version 2
      */
-
     MIRROR_AUTO_FOLD_ENABLED =
             0x0B46 + VehiclePropertyGroup.SYSTEM + VehicleArea.MIRROR + VehiclePropertyType.BOOLEAN,
 
@@ -2755,7 +2806,6 @@
      * @access VehiclePropertyAccess.READ
      * @version 2
      */
-
     MIRROR_AUTO_TILT_ENABLED =
             0x0B47 + VehiclePropertyGroup.SYSTEM + VehicleArea.MIRROR + VehiclePropertyType.BOOLEAN,
 
@@ -2775,10 +2825,10 @@
      * the user wants to select a preset, the desired preset number (0, 1, or 2) is set.
      *
      * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
-     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
-     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
-     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
-     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * {@code HasSupportedValueInfo#hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the area ID.
+     * {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value.
      * All integers between minSupportedValue and maxSupportedValue must be supported.
      * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
      * maxSupportedValue.
@@ -2802,10 +2852,10 @@
      * maxInt32Value for SEAT_MEMORY_SELECT.
      *
      * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
-     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
-     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
-     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
-     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * {@code HasSupportedValueInfo#hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the area ID.
+     * {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value.
      * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
      * maxSupportedValue.
      *
@@ -2850,10 +2900,10 @@
      * lowest and highest positions.
      *
      * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
-     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
-     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
-     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
-     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * {@code HasSupportedValueInfo#hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the area ID.
+     * {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value.
      * Values in between minSupportedValue and maxSupportedValue indicate a transition state between
      * the lowest and highest positions. All integers between minSupportedValue and
      * maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue,
@@ -2890,10 +2940,10 @@
      * occurring.
      *
      * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
-     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
-     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
-     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
-     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * {@code HasSupportedValueInfo#hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the area ID.
+     * {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value.
      * All integers between minSupportedValue and maxSupportedValue must be supported.
      * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
      * maxSupportedValue.
@@ -2928,10 +2978,10 @@
      * closest and farthest positions.
      *
      * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
-     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
-     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
-     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
-     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * {@code HasSupportedValueInfo#hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the area ID.
+     * {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value.
      * All integers between minSupportedValue and maxSupportedValue must be supported.
      * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
      * maxSupportedValue.
@@ -2966,10 +3016,10 @@
      * value is currently 0, then that means there is no movement currently occurring.
      *
      * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
-     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
-     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
-     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
-     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * {@code HasSupportedValueInfo#hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the area ID.
+     * {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value.
      * All integers between minSupportedValue and maxSupportedValue must be supported.
      * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
      * maxSupportedValue.
@@ -3006,10 +3056,10 @@
      * full recline and upright/forward positions.
      *
      * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
-     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
-     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
-     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
-     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * {@code HasSupportedValueInfo#hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the area ID.
+     * {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value.
      * All integers between minSupportedValue and maxSupportedValue must be supported.
      * Values in between minSupportedValue and maxSupportedValue indicate a transition state between
      * the full recline and upright/forward positions.
@@ -3046,10 +3096,10 @@
      * currently occurring.
      *
      * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
-     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
-     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
-     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
-     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * {@code HasSupportedValueInfo#hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the area ID.
+     * {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value.
      * All integers between minSupportedValue and maxSupportedValue must be supported.
      * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
      * maxSupportedValue.
@@ -3088,10 +3138,10 @@
      * full recline and upright/forward positions.
      *
      * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
-     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
-     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
-     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
-     * {@code MinMaxSupportedValueResult.maxSupportedValue} ihas the same meaning as maxInt32Value.
+     * {@code HasSupportedValueInfo#hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the area ID.
+     * {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult#maxSupportedValue} ihas the same meaning as maxInt32Value.
      * All integers between minSupportedValue and maxSupportedValue must be supported.
      * Values in between minSupportedValue and maxSupportedValue indicate a transition state between
      * the full recline and upright/forward positions.
@@ -3128,10 +3178,10 @@
      * currently occurring.
      *
      * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
-     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
-     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
-     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
-     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * {@code HasSupportedValueInfo#hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the area ID.
+     * {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value.
      * All integers between minSupportedValue and maxSupportedValue must be supported.
      * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
      * maxSupportedValue.
@@ -3164,10 +3214,10 @@
      * lowest and highest positions.
      *
      * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
-     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
-     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
-     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
-     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * {@code HasSupportedValueInfo#hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the area ID.
+     * {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value.
      * position.
      * All integers between minSupportedValue and maxSupportedValue must be supported.
      * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
@@ -3201,10 +3251,10 @@
      * is currently 0, then that means there is no movement currently occurring.
      *
      * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
-     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
-     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
-     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
-     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * {@code HasSupportedValueInfo#hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the area ID.
+     * {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value.
      * All integers between minSupportedValue and maxSupportedValue must be supported.
      * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
      * maxSupportedValue.
@@ -3242,10 +3292,10 @@
      * shallowest and deepest positions.
      *
      * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
-     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
-     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
-     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
-     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * {@code HasSupportedValueInfo#hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the area ID.
+     * {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value.
      * All integers between minSupportedValue and maxSupportedValue must be supported.
      * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
      * maxSupportedValue.
@@ -3279,10 +3329,10 @@
      * occurring.
      *
      * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
-     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
-     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
-     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
-     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * {@code HasSupportedValueInfo#hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the area ID.
+     * {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value.
      * All integers between minSupportedValue and maxSupportedValue must be supported.
      * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
      * maxSupportedValue.
@@ -3319,10 +3369,10 @@
      * lowest and highest positions.
      *
      * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
-     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
-     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
-     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
-     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * {@code HasSupportedValueInfo#hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the area ID.
+     * {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value.
      * All integers between minSupportedValue and maxSupportedValue must be supported.
      * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
      * maxSupportedValue.
@@ -3357,10 +3407,10 @@
      * value is currently 0, then that means there is no movement currently occurring.
      *
      * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
-     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
-     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
-     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
-     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * {@code HasSupportedValueInfo#hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the area ID.
+     * {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value.
      * All integers between minSupportedValue and maxSupportedValue must be supported.
      * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
      * maxSupportedValue.
@@ -3395,10 +3445,10 @@
      * forward and rearward positions.
      *
      * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
-     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
-     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
-     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
-     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * {@code HasSupportedValueInfo#hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the area ID.
+     * {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value.
      * All integers between minSupportedValue and maxSupportedValue must be supported.
      * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
      * maxSupportedValue.
@@ -3434,10 +3484,10 @@
      * currently occurring.
      *
      * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
-     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
-     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
-     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
-     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * {@code HasSupportedValueInfo#hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the area ID.
+     * {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value.
      * All integers between minSupportedValue and maxSupportedValue must be supported.
      * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
      * maxSupportedValue.
@@ -3472,10 +3522,10 @@
      * thinnest and widest positions.
      *
      * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
-     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
-     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
-     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
-     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * {@code HasSupportedValueInfo#hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the area ID.
+     * {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value.
      * All integers between minSupportedValue and maxSupportedValue must be supported.
      * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
      * maxSupportedValue.
@@ -3511,10 +3561,10 @@
      * currently occurring.
      *
      * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
-     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
-     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
-     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
-     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * {@code HasSupportedValueInfo#hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the area ID.
+     * {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value.
      * All integers between minSupportedValue and maxSupportedValue must be supported.
      * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
      * maxSupportedValue.
@@ -3572,10 +3622,10 @@
      * lowest and highest positions.
      *
      * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
-     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
-     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
-     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
-     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * {@code HasSupportedValueInfo#hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the area ID.
+     * {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value.
      * All integers between minSupportedValue and maxSupportedValue must be supported.
      * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
      * maxSupportedValue.
@@ -3612,10 +3662,10 @@
      * currently occurring.
      *
      * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
-     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
-     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
-     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
-     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * {@code HasSupportedValueInfo#hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the area ID.
+     * {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value.
      * All integers between minSupportedValue and maxSupportedValue must be supported.
      * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
      * maxSupportedValue.
@@ -3648,10 +3698,10 @@
      * full recline and most upright/forward positions.
      *
      * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
-     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
-     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
-     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
-     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * {@code HasSupportedValueInfo#hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the area ID.
+     * {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value.
      * All integers between minSupportedValue and maxSupportedValue must be supported.
      * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
      * maxSupportedValue.
@@ -3687,10 +3737,10 @@
      * currently occurring.
      *
      * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
-     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
-     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
-     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
-     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * {@code HasSupportedValueInfo#hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the area ID.
+     * {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value.
      * All integers between minSupportedValue and maxSupportedValue must be supported.
      * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
      * maxSupportedValue.
@@ -3723,10 +3773,10 @@
      * forward and rearward positions.
      *
      * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
-     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
-     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
-     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
-     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * {@code HasSupportedValueInfo#hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the area ID.
+     * {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value.
      * All integers between minSupportedValue and maxSupportedValue must be supported.
      * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
      * maxSupportedValue.
@@ -3762,10 +3812,10 @@
      * currently occurring.
      *
      * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
-     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
-     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
-     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
-     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * {@code HasSupportedValueInfo#hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the area ID.
+     * {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value.
      * All integers between minSupportedValue and maxSupportedValue must be supported.
      * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
      * maxSupportedValue.
@@ -3799,14 +3849,14 @@
      * For each supported area ID, the VehicleAreaConfig#supportedEnumValues must be defined unless
      * all enum values of VehicleLightState are supported.
      *
-     * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
-     * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} for the area ID
-     * unless all enum values of VehicleLightState are supported.
-     * At boot, the supported values list is the same as supportedEnumValues.
+     * If {@code HasSupportedValueInfo} is not {@code null} for a specifc area ID:
+     * {@code HasSupportedValueInfo#hasSupportedValuesList} must be {@code true}.
+     * At boot, supportedEnumValues (if defined) is equal to the supported values list.
      *
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ
      * @data_enum VehicleLightState
+     * @require_supported_values_list
      * @version 2
      */
     SEAT_FOOTWELL_LIGHTS_STATE =
@@ -3826,10 +3876,9 @@
      * For each supported area ID, the VehicleAreaConfig#supportedEnumValues must be defined unless
      * all enum values of VehicleLightSwitch are supported.
      *
-     * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
-     * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} for the area ID
-     * unless all enum values of VehicleLightSwitch are supported.
-     * At boot, the supported values list is the same as supportedEnumValues.
+     * If {@code HasSupportedValueInfo} is not {@code null} for a specifc area ID:
+     * {@code HasSupportedValueInfo#hasSupportedValuesList} must be {@code true}.
+     * At boot, supportedEnumValues (if defined) is equal to the supported values list.
      *
      * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
      * implement it as VehiclePropertyAccess.READ only.
@@ -3838,6 +3887,7 @@
      * @access VehiclePropertyAccess.READ_WRITE
      * @access VehiclePropertyAccess.READ
      * @data_enum VehicleLightSwitch
+     * @require_supported_values_list
      * @version 2
      */
     SEAT_FOOTWELL_LIGHTS_SWITCH =
@@ -3896,15 +3946,14 @@
      * all states of VehicleAirbagLocation are supported (including OTHER, which is not
      * recommended).
      *
-     * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
-     * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} for the area ID
-     * unless all states of VehicleAirbagLocation are supported (including OTHER, which is not
-     * recommended).
-     * At boot, the supported values list is the same as supportedEnumValues.
+     * If {@code HasSupportedValueInfo} is not {@code null} for a specifc area ID:
+     * {@code HasSupportedValueInfo#hasSupportedValuesList} must be {@code true}.
+     * At boot, supportedEnumValues (if defined) is equal to the supported values list.
      *
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ
      * @data_enum VehicleAirbagLocation
+     * @require_supported_values_list
      * @version 3
      */
     SEAT_AIRBAGS_DEPLOYED =
@@ -3925,10 +3974,10 @@
      * thinnest and widest positions.
      *
      * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
-     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
-     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
-     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
-     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * {@code HasSupportedValueInfo#hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the area ID.
+     * {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value.
      * All integers between minSupportedValue and maxSupportedValue must be supported.
      * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
      * maxSupportedValue.
@@ -3964,10 +4013,10 @@
      * currently occurring.
      *
      * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
-     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
-     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
-     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
-     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * {@code HasSupportedValueInfo#hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the area ID.
+     * {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value.
      * All integers between minSupportedValue and maxSupportedValue must be supported.
      * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
      * maxSupportedValue.
@@ -4000,10 +4049,10 @@
      * lowest and highest positions.
      *
      * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
-     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
-     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
-     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
-     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * {@code HasSupportedValueInfo#hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the area ID.
+     * {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value.
      * All integers between minSupportedValue and maxSupportedValue must be supported.
      * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
      * maxSupportedValue.
@@ -4037,10 +4086,10 @@
      * currently occurring.
      *
      * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
-     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
-     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
-     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
-     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * {@code HasSupportedValueInfo#hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the area ID.
+     * {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value.
      * All integers between minSupportedValue and maxSupportedValue must be supported.
      * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
      * maxSupportedValue.
@@ -4073,10 +4122,10 @@
      * normal and walk-in positions.
      *
      * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
-     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
-     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
-     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
-     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * {@code HasSupportedValueInfo#hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the area ID.
+     * {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value.
      * All integers between minSupportedValue and maxSupportedValue must be supported.
      * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
      * maxSupportedValue.
@@ -4159,10 +4208,10 @@
      *    Note that in this mode, 0 indicates the window is closed.
      *
      * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
-     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
-     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
-     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
-     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * {@code HasSupportedValueInfo#hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the area ID.
+     * {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value.
      * All integers between minSupportedValue and maxSupportedValue must be supported.
      * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
      * maxSupportedValue.
@@ -4213,10 +4262,10 @@
      *   Min = open the vent, automatically stop when vent is fully open.
      *
      * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
-     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
-     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
-     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
-     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * {@code HasSupportedValueInfo#hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} for the area ID.
+     * {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value.
      * All integers between minSupportedValue and maxSupportedValue must be supported.
      * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
      * maxSupportedValue.
@@ -4264,10 +4313,10 @@
      * The maxInt32Value for each area ID must specify the longest wiper period.
      *
      * If {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}:
-     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
-     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true}.
-     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
-     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * {@code HasSupportedValueInfo#hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true}.
+     * {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value.
      * All integers between minSupportedValue and maxSupportedValue must be supported.
      * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
      * maxSupportedValue.
@@ -4295,15 +4344,14 @@
      * unless all states in WindshieldWipersState are supported (including OTHER, which is not
      * recommended).
      *
-     * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
-     * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} for the area ID
-     * unless all states in WindshieldWipersState are supported (including OTHER, which is not
-     * recommended).
-     * At boot, the supported values list is the same as supportedEnumValues.
+     * If {@code HasSupportedValueInfo} is not {@code null} for a specifc area ID:
+     * {@code HasSupportedValueInfo#hasSupportedValuesList} must be {@code true}.
+     * At boot, supportedEnumValues (if defined) is equal to the supported values list.
      *
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ
      * @data_enum WindshieldWipersState
+     * @require_supported_values_list
      * @version 2
      */
     WINDSHIELD_WIPERS_STATE =
@@ -4320,11 +4368,9 @@
      * unless all states in WindshieldWipersSwitch are supported (including OTHER, which is not
      * recommended).
      *
-     * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
-     * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} for the area ID
-     * unless all states in WindshieldWipersSwitch are supported (including OTHER, which is not
-     * recommended).
-     * At boot, the supported values list is the same as supportedEnumValues.
+     * If {@code HasSupportedValueInfo} is not {@code null} for a specifc area ID:
+     * {@code HasSupportedValueInfo#hasSupportedValuesList} must be {@code true}.
+     * At boot, supportedEnumValues (if defined) is equal to the supported values list.
      *
      * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
      * implement it as VehiclePropertyAccess.READ only.
@@ -4337,6 +4383,7 @@
      * @access VehiclePropertyAccess.READ_WRITE
      * @access VehiclePropertyAccess.READ
      * @data_enum WindshieldWipersSwitch
+     * @require_supported_values_list
      * @version 2
      */
     WINDSHIELD_WIPERS_SWITCH =
@@ -4358,10 +4405,10 @@
      * closest and furthest positions.
      *
      * If {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}:
-     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
-     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true}.
-     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
-     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * {@code HasSupportedValueInfo#hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true}.
+     * {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value.
      * All integers between minSupportedValue and maxSupportedValue must be supported.
      * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
      * maxSupportedValue.
@@ -4395,10 +4442,10 @@
      * currently occurring.
      *
      * If {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}:
-     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
-     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true}.
-     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
-     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * {@code HasSupportedValueInfo#hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true}.
+     * {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value.
      * All integers between minSupportedValue and maxSupportedValue must be supported.
      * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
      * maxSupportedValue.
@@ -4431,10 +4478,10 @@
      * lowest and highest positions.
      *
      * If {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}:
-     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
-     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true}.
-     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
-     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * {@code HasSupportedValueInfo#hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true}.
+     * {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value.
      * All integers between minSupportedValue and maxSupportedValue must be supported.
      * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
      * maxSupportedValue.
@@ -4468,10 +4515,10 @@
      * currently occurring.
      *
      * If {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}:
-     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
-     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true}.
-     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
-     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * {@code HasSupportedValueInfo#hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true}.
+     * {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value.
      * All integers between minSupportedValue and maxSupportedValue must be supported.
      * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
      * maxSupportedValue.
@@ -4551,10 +4598,10 @@
      * closed and fully open positions.
      *
      * If {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}:
-     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
-     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true}.
-     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
-     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * {@code HasSupportedValueInfo#hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true}.
+     * {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value.
      * All integers between minSupportedValue and maxSupportedValue must be supported.
      * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
      * maxSupportedValue.
@@ -5146,14 +5193,14 @@
      * For the global area ID (0), the VehicleAreaConfig#supportedEnumValues must be defined unless
      * all enum values of VehicleLightState are supported.
      *
-     * If {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}:
-     * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true}
-     * unless all enum values of VehicleLightState are supported.
-     * At boot, the supported values list is the same as supportedEnumValues.
+     * If {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0):
+     * {@code HasSupportedValueInfo#hasSupportedValuesList} must be {@code true}.
+     * At boot, supportedEnumValues (if defined) is equal to the supported values list.
      *
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ
      * @data_enum VehicleLightState
+     * @require_supported_values_list
      * @version 2
      */
     STEERING_WHEEL_LIGHTS_STATE =
@@ -5173,10 +5220,9 @@
      * For the global area ID (0), the VehicleAreaConfig#supportedEnumValues must be defined unless
      * all enum values of VehicleLightSwitch are supported.
      *
-     * If {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}:
-     * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true}
-     * unless all enum values of VehicleLightSwitch are supported.
-     * At boot, the supported values list is the same as supportedEnumValues.
+     * If {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0):
+     * {@code HasSupportedValueInfo#hasSupportedValuesList} must be {@code true}.
+     * At boot, supportedEnumValues (if defined) is equal to the supported values list.
      *
      * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
      * implement it as VehiclePropertyAccess.READ only.
@@ -5185,6 +5231,7 @@
      * @access VehiclePropertyAccess.READ_WRITE
      * @access VehiclePropertyAccess.READ
      * @data_enum VehicleLightSwitch
+     * @require_supported_values_list
      * @version 2
      */
     STEERING_WHEEL_LIGHTS_SWITCH =
@@ -5689,7 +5736,7 @@
      * @access VehiclePropertyAccess.WRITE
      * @version 2
      */
-    WATCHDOG_ALIVE = 0xF31 + 0x10000000 + 0x01000000
+    WATCHDOG_ALIVE = 0x0F31 + 0x10000000 + 0x01000000
             + 0x00500000, // VehiclePropertyGroup:SYSTEM,VehicleArea:GLOBAL,VehiclePropertyType:INT64
     /**
      * Defines a process terminated by car watchdog and the reason of termination.
@@ -5920,8 +5967,20 @@
     /**
      * Indicates the maximum current draw threshold for charging set by the user
      *
-     * configArray[0] is used to specify the max current draw allowed by
-     * the vehicle in Amperes.
+     * configArray[0] is used to specify the max current draw allowed by the vehicle in Amperes at
+     * boot time.
+     *
+     * If {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null},
+     * {@code HasSupportedValueInfo#hasMaxSupportedValue} and
+     * {@code HasSupportedValueInfo#hasMinSupportedValue} must be {@code true}.
+     * {@code MinMaxSupportedValueResult#maxSupportedValue} specifies the max current draw allowed
+     * by the vehicle in Amperes at the current moment.
+     * {@code MinMaxSupportedValueResult#minSupportedValue} must be 0.
+     * At boot, configArray[0] is equal to maxSupportedValue.
+     *
+     * If the max current draw allowed by the vehicle may change dynamically,
+     * {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true} and
+     * {@code MinMaxSupportedValueResult#maxSupportedValue} must be implemented.
      *
      * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
      * implement it as VehiclePropertyAccess.READ only.
@@ -5940,18 +5999,30 @@
      *
      * Returns a float value from 0 to 100.
      *
-     * configArray is used to specify the valid values.
+     * configArray is used to specify the valid values at boot time.
      *   For example, if the vehicle supports the following charge percent limit values:
      *     [20, 40, 60, 80, 100]
      *   then the configArray should be {20, 40, 60, 80, 100}
      * If the configArray is empty then all values from 0 to 100 must be valid.
      *
+     * If {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null},
+     * {@code HasSupportedValueInfo#hasSupportedValuesList} must be {@code true}.
+     * {@code SupportedValuesListResult#supportedValuesList} specifies the
+     * valid maximum charge percent threshold options at the current moment.
+     * At boot, configArray content must match the supported values list.
+     *
+     * If the valid values may change dynamically,
+     * {@code HasSupportedValueInfo#hasSupportedValuesList} must be {@code true} and
+     * {@code SupportedValuesListResult#supportedValuesList} must be implemented.
+     *
      * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
      * implement it as VehiclePropertyAccess.READ only.
      *
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ_WRITE
      * @access VehiclePropertyAccess.READ
+     * @require_supported_values_list
+     * @legacy_supported_values_in_config
      * @version 2
      */
     EV_CHARGE_PERCENT_LIMIT = 0x0F40 + 0x10000000 + 0x01000000
@@ -6202,14 +6273,14 @@
      * For the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined
      * unless all states of VehicleAutonomousState are supported.
      *
-     * If {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}:
-     * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true}
-     * unless all enum values of VehicleAutonomousState are supported.
-     * At boot, the supported values list is the same as supportedEnumValues.
+     * If {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0):
+     * {@code HasSupportedValueInfo#hasSupportedValuesList} must be {@code true}.
+     * At boot, supportedEnumValues (if defined) is equal to the supported values list.
      *
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ
      * @data_enum VehicleAutonomousState
+     * @require_supported_values_list
      * @version 3
      */
     VEHICLE_DRIVING_AUTOMATION_CURRENT_LEVEL =
@@ -6229,9 +6300,14 @@
      * and is currently in the target level of autonomy, this property must be equal to the value of
      * VEHICLE_DRIVING_AUTOMATION_CURRENT_LEVEL.
      *
-     * For the global area ID (0), the SupportedValuesListResult#supportedValuesList array must be
-     * defined unless all states of VehicleAutonomousState are supported. These values must match
-     * the values in supportedValuesList of VEHICLE_DRIVING_AUTOMATION_CURRENT_LEVEL.
+     * For the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined
+     * unless all states of VehicleAutonomousState are supported. The supported values for this
+     * property must be the same as the supported values for
+     * VEHICLE_DRIVING_AUTOMATION_CURRENT_LEVEL.
+     *
+     * If {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0):
+     * {@code HasSupportedValueInfo#hasSupportedValuesList} must be {@code true}.
+     * At boot, supportedEnumValues (if defined) is equal to the supported values list.
      *
      * For the property that communicates the current state of autonomy, see
      * VEHICLE_DRIVING_AUTOMATION_CURRENT_LEVEL.
@@ -6239,6 +6315,7 @@
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ
      * @data_enum VehicleAutonomousState
+     * @require_supported_values_list
      * @version 4
      */
     VEHICLE_DRIVING_AUTOMATION_TARGET_LEVEL =
@@ -6334,16 +6411,15 @@
      * unless all states of both AutomaticEmergencyBrakingState (including OTHER, which is not
      * recommended) and ErrorState are supported.
      *
-     * If {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}:
-     * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true}
-     * unless all states of both AutomaticEmergencyBrakingState (including OTHER, which is not
-     * recommended) and ErrorState are supported.
-     * At boot, the supported values list is the same as supportedEnumValues.
+     * If {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0):
+     * {@code HasSupportedValueInfo#hasSupportedValuesList} must be {@code true}.
+     * At boot, supportedEnumValues (if defined) is equal to the supported values list.
      *
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ
      * @data_enum AutomaticEmergencyBrakingState
      * @data_enum ErrorState
+     * @require_supported_values_list
      * @version 2
      */
     AUTOMATIC_EMERGENCY_BRAKING_STATE =
@@ -6382,16 +6458,15 @@
      * unless all states of both ForwardCollisionWarningState (including OTHER, which is not
      * recommended) and ErrorState are supported.
      *
-     * If {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}:
-     * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true}
-     * unless all states of both ForwardCollisionWarningState (including OTHER, which is not
-     * recommended) and ErrorState are supported.
-     * At boot, the supported values list is the same as supportedEnumValues.
+     * If {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0):
+     * {@code HasSupportedValueInfo#hasSupportedValuesList} must be {@code true}.
+     * At boot, supportedEnumValues (if defined) is equal to the supported values list.
      *
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ
      * @data_enum ForwardCollisionWarningState
      * @data_enum ErrorState
+     * @require_supported_values_list
      * @version 2
      */
     FORWARD_COLLISION_WARNING_STATE =
@@ -6430,16 +6505,15 @@
      * unless all states of both BlindSpotWarningState (including OTHER, which is not
      * recommended) and ErrorState are supported.
      *
-     * If {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}:
-     * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true}
-     * unless all states of both BlindSpotWarningState (including OTHER, which is not
-     * recommended) and ErrorState are supported.
-     * At boot, the supported values list is the same as supportedEnumValues.
+     * If {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0):
+     * {@code HasSupportedValueInfo#hasSupportedValuesList} must be {@code true}.
+     * At boot, supportedEnumValues (if defined) is equal to the supported values list.
      *
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ
      * @data_enum BlindSpotWarningState
      * @data_enum ErrorState
+     * @require_supported_values_list
      * @version 2
      */
     BLIND_SPOT_WARNING_STATE =
@@ -6479,16 +6553,15 @@
      * unless all states of both LaneDepartureWarningState (including OTHER, which is not
      * recommended) and ErrorState are supported.
      *
-     * If {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}:
-     * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true}
-     * unless all states of both LaneDepartureWarningState (including OTHER, which is not
-     * recommended) and ErrorState are supported.
-     * At boot, the supported values list is the same as supportedEnumValues.
+     * If {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0):
+     * {@code HasSupportedValueInfo#hasSupportedValuesList} must be {@code true}.
+     * At boot, supportedEnumValues (if defined) is equal to the supported values list.
      *
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ
      * @data_enum LaneDepartureWarningState
      * @data_enum ErrorState
+     * @require_supported_values_list
      * @version 2
      */
     LANE_DEPARTURE_WARNING_STATE =
@@ -6535,16 +6608,15 @@
      * unless all states of both LaneKeepAssistState (including OTHER, which is not
      * recommended) and ErrorState are supported.
      *
-     * If {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}:
-     * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true}
-     * unless all states of both LaneKeepAssistState (including OTHER, which is not
-     * recommended) and ErrorState are supported.
-     * At boot, the supported values list is the same as supportedEnumValues.
+     * If {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0):
+     * {@code HasSupportedValueInfo#hasSupportedValuesList} must be {@code true}.
+     * At boot, supportedEnumValues (if defined) is equal to the supported values list.
      *
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ
      * @data_enum LaneKeepAssistState
      * @data_enum ErrorState
+     * @require_supported_values_list
      * @version 2
      */
     LANE_KEEP_ASSIST_STATE =
@@ -6593,10 +6665,9 @@
      * For the global area ID (0), the VehicleAreaConfig#supportedEnumValues must be defined unless
      * all enum values of LaneCenteringAssistCommand are supported.
      *
-     * If {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}:
-     * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true}
-     * unless all enum values of LaneCenteringAssistCommand are supported.
-     * At boot, the supported values list is the same as supportedEnumValues.
+     * If {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0):
+     * {@code HasSupportedValueInfo#hasSupportedValuesList} must be {@code true}.
+     * At boot, supportedEnumValues (if defined) is equal to the supported values list.
      *
      * When this property is not available because LCA is disabled (i.e.
      * LANE_CENTERING_ASSIST_ENABLED is false), this property must return
@@ -6609,6 +6680,7 @@
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.WRITE
      * @data_enum LaneCenteringAssistCommand
+     * @require_supported_values_list
      * @version 2
      */
     LANE_CENTERING_ASSIST_COMMAND =
@@ -6628,16 +6700,15 @@
      * unless all states of both LaneCenteringAssistState (including OTHER, which is not
      * recommended) and ErrorState are supported.
      *
-     * If {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}:
-     * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true}
-     * unless all states of both LaneCenteringAssistState (including OTHER, which is not
-     * recommended) and ErrorState are supported.
-     * At boot, the supported values list is the same as supportedEnumValues.
+     * If {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0):
+     * {@code HasSupportedValueInfo#hasSupportedValuesList} must be {@code true}.
+     * At boot, supportedEnumValues (if defined) is equal to the supported values list.
      *
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ
      * @data_enum LaneCenteringAssistState
      * @data_enum ErrorState
+     * @require_supported_values_list
      * @version 2
      */
     LANE_CENTERING_ASSIST_STATE =
@@ -6679,16 +6750,15 @@
      * unless all states of EmergencyLaneKeepAssistState (including OTHER, which is not recommended)
      * and ErrorState are supported.
      *
-     * If {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}:
-     * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true}
-     * unless all states of EmergencyLaneKeepAssistState (including OTHER, which is not recommended)
-     * and ErrorState are supported.
-     * At boot, the supported values list is the same as supportedEnumValues.
+     * If {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0):
+     * {@code HasSupportedValueInfo#hasSupportedValuesList} must be {@code true}.
+     * At boot, supportedEnumValues (if defined) is equal to the supported values list.
      *
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ
      * @data_enum EmergencyLaneKeepAssistState
      * @data_enum ErrorState
+     * @require_supported_values_list
      * @version 2
      */
     EMERGENCY_LANE_KEEP_ASSIST_STATE =
@@ -6732,11 +6802,9 @@
      * unless all states of CruiseControlType (including OTHER, which is not recommended) and
      * ErrorState are supported.
      *
-     * If {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}:
-     * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true}
-     * unless all states of CruiseControlType (including OTHER, which is not recommended) and
-     * ErrorState are supported.
-     * At boot, the supported values list is the same as supportedEnumValues.
+     * If {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0):
+     * {@code HasSupportedValueInfo#hasSupportedValuesList} must be {@code true}.
+     * At boot, supportedEnumValues (if defined) is equal to the supported values list.
      *
      * Trying to write CruiseControlType#OTHER or an ErrorState to this property will throw an
      * IllegalArgumentException.
@@ -6749,6 +6817,7 @@
      * @access VehiclePropertyAccess.READ
      * @data_enum CruiseControlType
      * @data_enum ErrorState
+     * @require_supported_values_list
      * @version 2
      */
     CRUISE_CONTROL_TYPE =
@@ -6766,16 +6835,15 @@
      * unless all states of CruiseControlState (including OTHER, which is not recommended) and
      * ErrorState are supported.
      *
-     * If {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}:
-     * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true}
-     * unless all states of CruiseControlState (including OTHER, which is not recommended) and
-     * ErrorState are supported.
-     * At boot, the supported values list is the same as supportedEnumValues.
+     * If {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0):
+     * {@code HasSupportedValueInfo#hasSupportedValuesList} must be {@code true}.
+     * At boot, supportedEnumValues (if defined) is equal to the supported values list.
      *
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ
      * @data_enum CruiseControlState
      * @data_enum ErrorState
+     * @require_supported_values_list
      * @version 2
      */
     CRUISE_CONTROL_STATE =
@@ -6790,10 +6858,9 @@
      * unless all states of CruiseControlState are supported. Any unsupported commands sent through
      * this property must return StatusCode#INVALID_ARG.
      *
-     * If {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}:
-     * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true}
-     * unless all states of CruiseControlState are supported.
-     * At boot, the supported values list is the same as supportedEnumValues.
+     * If {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0):
+     * {@code HasSupportedValueInfo#hasSupportedValuesList} must be {@code true}.
+     * At boot, supportedEnumValues (if defined) is equal to the supported values list.
      *
      * When this property is not available because CC is disabled (i.e. CRUISE_CONTROL_ENABLED is
      * false), this property must return StatusCode#NOT_AVAILABLE_DISABLED. If CRUISE_CONTROL_STATE
@@ -6805,6 +6872,7 @@
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.WRITE
      * @data_enum CruiseControlCommand
+     * @require_supported_values_list
      * @version 2
      */
     CRUISE_CONTROL_COMMAND =
@@ -6816,9 +6884,16 @@
      * OEMs should set the minFloatValue and maxFloatValue values for this property to define the
      * min and max target speed values. These values must be non-negative.
      *
-     * The maxFloatValue represents the upper bound of the target speed.
      * The minFloatValue represents the lower bound of the target speed.
      *
+     * The maxFloatValue represents the upper bound of the target speed.
+     *
+     * If {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}:
+     * {@code HasSupportedValueInfo#hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true}.
+     * {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minFloatValue.
+     * {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxFloatValue.
+     *
      * When this property is not available because CC is disabled (i.e. CRUISE_CONTROL_ENABLED is
      * false), this property must return StatusCode#NOT_AVAILABLE_DISABLED. If CRUISE_CONTROL_STATE
      * is implemented and the state is set to an ErrorState value, then this property must return a
@@ -6829,6 +6904,7 @@
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ
      * @unit VehicleUnit.METER_PER_SEC
+     * @require_min_max_supported_value
      * @version 2
      */
     CRUISE_CONTROL_TARGET_SPEED =
@@ -6843,9 +6919,17 @@
      * vehicle's front-most point. The actual time gap from a leading vehicle can be above or below
      * this value.
      *
-     * The possible values to set for the target time gap should be specified in configArray in
-     * ascending order. All values must be positive. If the property is writable, all values must be
-     * writable.
+     * The possible values to set for the target time gap at boot time should be specified in
+     * configArray in ascending order. All values must be positive. If the property is writable, all
+     * values must be writable.
+     *
+     * If {@code HasSupportedValueInfo} is not {@code null},
+     * {@code HasSupportedValueInfo#hasSupportedValuesList} must be {@code true}. The supported
+     * values list represents the possible values to set at the current moment.
+     *
+     * If the possible values to set may change dynamically,
+     * {@code HasSupportedValueInfo#hasSupportedValuesList} must be {@code true} and the supported
+     * values list must be implemented.
      *
      * When this property is not available because CC is disabled (i.e. CRUISE_CONTROL_ENABLED is
      * false), this property must return StatusCode#NOT_AVAILABLE_DISABLED. If CRUISE_CONTROL_STATE
@@ -6861,6 +6945,8 @@
      * @access VehiclePropertyAccess.READ_WRITE
      * @access VehiclePropertyAccess.READ
      * @unit VehicleUnit.MILLI_SECS
+     * @require_supported_values_list
+     * @legacy_supported_values_in_config
      * @version 2
      */
     ADAPTIVE_CRUISE_CONTROL_TARGET_TIME_GAP =
@@ -6874,10 +6960,18 @@
      * vehicle and the front-most point of the ACC vehicle.
      *
      * The maxInt32Value and minInt32Value in VehicleAreaConfig must be defined.
+     *
      * The minInt32Value should be 0.
+     *
      * The maxInt32Value should be populated with the maximum range the distance sensor can support.
      * This value should be non-negative.
      *
+     * If {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}:
+     * {@code HasSupportedValueInfo#hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo#hasMaxSupportedValue} must be {@code true}.
+     * {@code MinMaxSupportedValueResult#minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult#maxSupportedValue} has the same meaning as maxInt32Value.
+     *
      * When no lead vehicle is detected (that is, when there is no leading vehicle or the leading
      * vehicle is too far away for the sensor to detect), this property should return
      * StatusCode.NOT_AVAILABLE.
@@ -6892,6 +6986,7 @@
      * @change_mode VehiclePropertyChangeMode.CONTINUOUS
      * @access VehiclePropertyAccess.READ
      * @unit VehicleUnit.MILLIMETER
+     * @require_min_max_supported_value
      * @version 2
      */
     ADAPTIVE_CRUISE_CONTROL_LEAD_VEHICLE_MEASURED_DISTANCE =
@@ -6935,16 +7030,15 @@
      * unless all states of both HandsOnDetectionDriverState (including OTHER, which is not
      * recommended) and ErrorState are supported.
      *
-     * If {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}:
-     * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true}
-     * unless all states of both HandsOnDetectionDriverState (including OTHER, which is not
-     * recommended) and ErrorState are supported.
-     * At boot, the supported values list is the same as supportedEnumValues.
+     * If {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0):
+     * {@code HasSupportedValueInfo#hasSupportedValuesList} must be {@code true}.
+     * At boot, supportedEnumValues (if defined) is equal to the supported values list.
      *
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ
      * @data_enum HandsOnDetectionDriverState
      * @data_enum ErrorState
+     * @require_supported_values_list
      * @version 2
      */
     HANDS_ON_DETECTION_DRIVER_STATE =
@@ -6964,16 +7058,15 @@
      * unless all states of both HandsOnDetectionWarning (including OTHER, which is not recommended)
      * and ErrorState are supported.
      *
-     * If {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}:
-     * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true}
-     * unless all states of both HandsOnDetectionWarning (including OTHER, which is not recommended)
-     * and ErrorState are supported.
-     * At boot, the supported values list is the same as supportedEnumValues.
+     * If {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0):
+     * {@code HasSupportedValueInfo#hasSupportedValuesList} must be {@code true}.
+     * At boot, supportedEnumValues (if defined) is equal to the supported values list.
      *
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ
      * @data_enum HandsOnDetectionWarning
      * @data_enum ErrorState
+     * @require_supported_values_list
      * @version 2
      */
     HANDS_ON_DETECTION_WARNING =
@@ -7020,16 +7113,15 @@
      * unless all states of both DriverDrowsinessAttentionState (including OTHER, which is not
      * recommended) and ErrorState are supported.
      *
-     * If {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}:
-     * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true}
-     * unless all states of both DriverDrowsinessAttentionState (including OTHER, which is not
-     * recommended) and ErrorState are supported.
-     * At boot, the supported values list is the same as supportedEnumValues.
+     * If {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0):
+     * {@code HasSupportedValueInfo#hasSupportedValuesList} must be {@code true}.
+     * At boot, supportedEnumValues (if defined) is equal to the supported values list.
      *
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ
      * @data_enum DriverDrowsinessAttentionState
      * @data_enum ErrorState
+     * @require_supported_values_list
      * @version 3
      */
     DRIVER_DROWSINESS_ATTENTION_STATE =
@@ -7073,16 +7165,15 @@
      * unless all states of both DriverDrowsinessAttentionWarning (including OTHER, which is not
      * recommended) and ErrorState are supported.
      *
-     * If {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}:
-     * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true}
-     * unless all states of both DriverDrowsinessAttentionWarning (including OTHER, which is not
-     * recommended) and ErrorState are supported.
-     * At boot, the supported values list is the same as supportedEnumValues.
+     * If {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0):
+     * {@code HasSupportedValueInfo#hasSupportedValuesList} must be {@code true}.
+     * At boot, supportedEnumValues (if defined) is equal to the supported values list.
      *
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ
      * @data_enum DriverDrowsinessAttentionWarning
      * @data_enum ErrorState
+     * @require_supported_values_list
      * @version 3
      */
     DRIVER_DROWSINESS_ATTENTION_WARNING =
@@ -7127,16 +7218,15 @@
      * unless all states of both DriverDistractionState (including OTHER, which is not
      * recommended) and ErrorState are supported.
      *
-     * If {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}:
-     * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true}
-     * unless all states of both DriverDistractionState (including OTHER, which is not
-     * recommended) and ErrorState are supported.
-     * At boot, the supported values list is the same as supportedEnumValues.
+     * If {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0):
+     * {@code HasSupportedValueInfo#hasSupportedValuesList} must be {@code true}.
+     * At boot, supportedEnumValues (if defined) is equal to the supported values list.
      *
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ
      * @data_enum DriverDistractionState
      * @data_enum ErrorState
+     * @require_supported_values_list
      * @version 3
      */
     DRIVER_DISTRACTION_STATE =
@@ -7179,16 +7269,15 @@
      * unless all states of both DriverDistractionWarning (including OTHER, which is not
      * recommended) and ErrorState are supported.
      *
-     * If {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}:
-     * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true}
-     * unless all states of both DriverDistractionWarning (including OTHER, which is not
-     * recommended) and ErrorState are supported.
-     * At boot, the supported values list is the same as supportedEnumValues.
+     * If {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0):
+     * {@code HasSupportedValueInfo#hasSupportedValuesList} must be {@code true}.
+     * At boot, supportedEnumValues (if defined) is equal to the supported values list.
      *
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ
      * @data_enum DriverDistractionWarning
      * @data_enum ErrorState
+     * @require_supported_values_list
      * @version 3
      */
     DRIVER_DISTRACTION_WARNING =
@@ -7234,16 +7323,15 @@
      * unless all states of both LowSpeedCollisionWarningState (including OTHER, which is not
      * recommended) and ErrorState are supported.
      *
-     * If {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}:
-     * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true}
-     * unless all states of both LowSpeedCollisionWarningState (including OTHER, which is not
-     * recommended) and ErrorState are supported.
-     * At boot, the supported values list is the same as supportedEnumValues.
+     * If {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0):
+     * {@code HasSupportedValueInfo#hasSupportedValuesList} must be {@code true}.
+     * At boot, supportedEnumValues (if defined) is equal to the supported values list.
      *
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ
      * @data_enum LowSpeedCollisionWarningState
      * @data_enum ErrorState
+     * @require_supported_values_list
      * @version 3
      */
     LOW_SPEED_COLLISION_WARNING_STATE =
@@ -7283,16 +7371,15 @@
      * unless all states of both CrossTrafficMonitoringWarningState (including OTHER, which is not
      * recommended) and ErrorState are supported.
      *
-     * If {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}:
-     * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true}
-     * unless all states of both CrossTrafficMonitoringWarningState (including OTHER, which is not
-     * recommended) and ErrorState are supported.
-     * At boot, the supported values list is the same as supportedEnumValues.
+     * If {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0):
+     * {@code HasSupportedValueInfo#hasSupportedValuesList} must be {@code true}.
+     * At boot, supportedEnumValues (if defined) is equal to the supported values list.
      *
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ
      * @data_enum CrossTrafficMonitoringWarningState
      * @data_enum ErrorState
+     * @require_supported_values_list
      * @version 3
      */
     CROSS_TRAFFIC_MONITORING_WARNING_STATE =
@@ -7343,16 +7430,15 @@
      * unless all states of both LowSpeedAutomaticEmergencyBrakingState (including OTHER, which is
      * not recommended) and ErrorState are supported.
      *
-     * If {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}:
-     * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true}
-     * unless all states of both LowSpeedAutomaticEmergencyBrakingState (including OTHER, which is
-     * not recommended) and ErrorState are supported.
-     * At boot, the supported values list is the same as supportedEnumValues.
+     * If {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0):
+     * {@code HasSupportedValueInfo#hasSupportedValuesList} must be {@code true}.
+     * At boot, supportedEnumValues (if defined) is equal to the supported values list.
      *
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ
      * @data_enum LowSpeedAutomaticEmergencyBrakingState
      * @data_enum ErrorState
+     * @require_supported_values_list
      * @version 3
      */
     LOW_SPEED_AUTOMATIC_EMERGENCY_BRAKING_STATE =
diff --git a/bluetooth/audio/utils/aidl_session/BluetoothLeAudioAseConfigurationSettingProvider.cpp b/bluetooth/audio/utils/aidl_session/BluetoothLeAudioAseConfigurationSettingProvider.cpp
index 5909c92..3e18de2 100644
--- a/bluetooth/audio/utils/aidl_session/BluetoothLeAudioAseConfigurationSettingProvider.cpp
+++ b/bluetooth/audio/utils/aidl_session/BluetoothLeAudioAseConfigurationSettingProvider.cpp
@@ -674,14 +674,14 @@
         configurationFlags.bitmask |=
             ConfigurationFlags::ALLOW_ASYMMETRIC_CONFIGURATIONS;
       }
+    }
+  } else {
+    if (codec_cfg == nullptr) {
+      LOG(ERROR) << "No codec config matching key " << codec_config_key.c_str()
+                 << " found";
     } else {
-      if (codec_cfg == nullptr) {
-        LOG(ERROR) << "No codec config matching key "
-                   << codec_config_key.c_str() << " found";
-      } else {
-        LOG(ERROR) << "Configuration '" << flat_cfg->name()->c_str()
-                   << "' has no valid subconfigurations.";
-      }
+      LOG(ERROR) << "Configuration '" << flat_cfg->name()->c_str()
+                 << "' has no valid subconfigurations.";
     }
   }
 }
diff --git a/bluetooth/hci/h4_protocol.cc b/bluetooth/hci/h4_protocol.cc
index 5f6d86e..109ca5c 100644
--- a/bluetooth/hci/h4_protocol.cc
+++ b/bluetooth/hci/h4_protocol.cc
@@ -45,29 +45,50 @@
 }
 
 size_t H4Protocol::Send(PacketType type, const uint8_t* data, size_t length) {
-  /* For HCI communication over USB dongle, multiple write results in
-   * response timeout as driver expect type + data at once to process
-   * the command, so using "writev"(for atomicity) here.
-   */
-  struct iovec iov[2];
-  ssize_t ret = 0;
-  iov[0].iov_base = &type;
-  iov[0].iov_len = sizeof(type);
-  iov[1].iov_base = (void*)data;
-  iov[1].iov_len = length;
-  while (1) {
-    ret = TEMP_FAILURE_RETRY(writev(uart_fd_, iov, 2));
+  struct iovec iov_array[] = {{&type, sizeof(type)},
+                              {const_cast<uint8_t*>(data), length}};
+  size_t iovcnt = sizeof(iov_array) / sizeof(iov_array[0]);
+  struct iovec* iov = iov_array;
+  size_t total_bytes = sizeof(type) + length;
+  size_t remaining_bytes = total_bytes;
+  size_t bytes_written = 0;
+
+  while (remaining_bytes > 0) {
+    ssize_t ret = TEMP_FAILURE_RETRY(writev(uart_fd_, iov, iovcnt));
     if (ret == -1) {
-      LOG_ALWAYS_FATAL("%s error writing to UART (%s)", __func__,
-                       strerror(errno));
+      if (errno == EAGAIN) continue;
+      ALOGE("Error writing to UART (%s)", strerror(errno));
+      break;
     } else if (ret == 0) {
       // Nothing written :(
       ALOGE("%s zero bytes written - something went wrong...", __func__);
       break;
+    } else if (ret == remaining_bytes) {
+      // Everything written
+      bytes_written += ret;
+      break;
     }
-    break;
+
+    // Updating counters for partial writes
+    bytes_written += ret;
+    remaining_bytes -= ret;
+
+    ALOGW("%s: %zu/%zu bytes written - retrying remaining %zu bytes", __func__,
+          bytes_written, total_bytes, remaining_bytes);
+
+    // Remove fully written iovs from the list
+    while (ret >= iov->iov_len) {
+      ret -= iov->iov_len;
+      ++iov;
+      --iovcnt;
+    }
+    // Adjust the iov to point to the remaining data that needs to be written
+    if (ret > 0) {
+      iov->iov_base = static_cast<uint8_t*>(iov->iov_base) + ret;
+      iov->iov_len -= ret;
+    }
   }
-  return ret;
+  return total_bytes - remaining_bytes;
 }
 
 size_t H4Protocol::OnPacketReady(const std::vector<uint8_t>& packet) {
diff --git a/boot/aidl/client/BootControlClient.cpp b/boot/aidl/client/BootControlClient.cpp
index 5cca183..7aab5b4 100644
--- a/boot/aidl/client/BootControlClient.cpp
+++ b/boot/aidl/client/BootControlClient.cpp
@@ -80,6 +80,7 @@
     explicit BootControlClientAidl(std::shared_ptr<IBootControl> module)
         : module_(module),
           boot_control_death_recipient(AIBinder_DeathRecipient_new(onBootControlServiceDied)) {
+        AIBinder_DeathRecipient_setOnUnlinked(boot_control_death_recipient, onCallbackUnlinked);
         binder_status_t status =
                 AIBinder_linkToDeath(module->asBinder().get(), boot_control_death_recipient, this);
         if (status != STATUS_OK) {
@@ -236,6 +237,11 @@
   private:
     std::shared_ptr<IBootControl> module_;
     AIBinder_DeathRecipient* boot_control_death_recipient;
+    static void onCallbackUnlinked(void* /*client*/) {
+        // this is an empty function needed to suppress the "AIBinder_linkToDeath is being called
+        // with a non-null cookie and no onUnlink callback set. This might not be intended.
+        // AIBinder_DeathRecipient_setOnUnlinked should be called first." warning
+    }
     static void onBootControlServiceDied(void* client) {
         BootControlClientAidl* self = static_cast<BootControlClientAidl*>(client);
         self->onBootControlServiceDied();
diff --git a/compatibility_matrices/Android.bp b/compatibility_matrices/Android.bp
index 1f040cb..63ef223 100644
--- a/compatibility_matrices/Android.bp
+++ b/compatibility_matrices/Android.bp
@@ -46,7 +46,7 @@
     product_variables: {
         release_aidl_use_unfrozen: {
             required: [
-                "framework_compatibility_matrix.202504.xml",
+                "framework_compatibility_matrix.202604.xml",
             ],
         },
     },
@@ -69,7 +69,7 @@
     product_variables: {
         release_aidl_use_unfrozen: {
             required: [
-                "framework_compatibility_matrix.202504.xml",
+                "framework_compatibility_matrix.202604.xml",
             ],
         },
     },
@@ -151,3 +151,10 @@
         "kernel_config_b_6.12",
     ],
 }
+
+vintf_compatibility_matrix {
+    name: "framework_compatibility_matrix.202604.xml",
+    stem: "compatibility_matrix.202604.xml",
+    srcs: ["compatibility_matrix.202604.xml"],
+    kernel_configs: ["kernel_config_c_6.12"],
+}
diff --git a/compatibility_matrices/bump.py b/compatibility_matrices/bump.py
index 63aa386..6c694d3 100755
--- a/compatibility_matrices/bump.py
+++ b/compatibility_matrices/bump.py
@@ -45,6 +45,7 @@
         self.current_level = cmdline_args.current_level
         self.current_letter = cmdline_args.current_letter
         self.current_version = cmdline_args.platform_version
+        self.next_version = cmdline_args.next_platform_version
         self.current_module_name = f"framework_compatibility_matrix.{self.current_level}.xml"
         self.current_xml = self.interfaces_dir / f"compatibility_matrices/compatibility_matrix.{self.current_level}.xml"
         self.device_module_name = "framework_compatibility_matrix.device.xml"
@@ -129,27 +130,27 @@
             return
         try:
             check_call(["grep", "-h",
-                        f"{self.current_letter.upper()} = {self.current_level}",
-                        "system/libvintf/include/vintf/Level.h"])
+                        f"{self.next_letter.upper()} = {self.next_level}",
+                        f"{self.top}/system/libvintf/include/vintf/Level.h"])
         except subprocess.CalledProcessError:
             print("Adding new API level to libvintf")
-            add_lines_above("system/libvintf/analyze_matrix/analyze_matrix.cpp",
+            add_lines_above(f"{self.top}/system/libvintf/analyze_matrix/analyze_matrix.cpp",
                             "        case Level::UNSPECIFIED:",
                             textwrap.indent(textwrap.dedent(f"""\
-                                    case Level::{self.current_letter.upper()}:
-                                        return "Android {self.current_version} ({self.current_letter.upper()})";"""),
+                                    case Level::{self.next_letter.upper()}:
+                                        return "Android {self.next_version} ({self.next_letter.upper()})";"""),
                             "    "*2))
-            add_lines_above("system/libvintf/include/vintf/Level.h",
+            add_lines_above(f"{self.top}/system/libvintf/include/vintf/Level.h",
                             "    // To add new values:",
-                            f"    {self.current_letter.upper()} = {self.current_level},")
-            add_lines_above("system/libvintf/include/vintf/Level.h",
+                            f"    {self.next_letter.upper()} = {self.next_level},")
+            add_lines_above(f"{self.top}/system/libvintf/include/vintf/Level.h",
                             "        Level::UNSPECIFIED,",
-                            f"        Level::{self.current_letter.upper()},")
-            add_lines_above("system/libvintf/RuntimeInfo.cpp",
+                            f"        Level::{self.next_letter.upper()},")
+            add_lines_above(f"{self.top}/system/libvintf/RuntimeInfo.cpp",
                             "            // Add more levels above this line.",
                             textwrap.indent(textwrap.dedent(f"""\
-                                        case {self.current_version}: {{
-                                            ret = Level::{self.current_letter.upper()};
+                                        case {self.next_version}: {{
+                                            ret = Level::{self.next_letter.upper()};
                                         }} break;"""),
                             "    "*3))
 
@@ -185,7 +186,11 @@
     parser.add_argument("platform_version",
                         type=str,
                         nargs="?",
-                        help="Android release version number number (e.g. 16)")
+                        help="Current Android release version number (e.g. 16)")
+    parser.add_argument("next_platform_version",
+                        type=str,
+                        nargs="?",
+                        help="Next Android release version number number (e.g. 17)")
     cmdline_args = parser.parse_args()
 
     Bump(cmdline_args).run()
diff --git a/compatibility_matrices/compatibility_matrix.202604.xml b/compatibility_matrices/compatibility_matrix.202604.xml
new file mode 100644
index 0000000..e5e2abf
--- /dev/null
+++ b/compatibility_matrices/compatibility_matrix.202604.xml
@@ -0,0 +1,720 @@
+<compatibility-matrix version="1.0" type="framework" level="202604">
+    <hal format="aidl">
+        <name>android.hardware.audio.core</name>
+        <version>1-3</version>
+        <interface>
+            <name>IModule</name>
+            <instance>default</instance>
+            <instance>a2dp</instance>
+            <instance>bluetooth</instance>
+            <instance>hearing_aid</instance>
+            <instance>msd</instance>
+            <instance>r_submix</instance>
+            <instance>stub</instance>
+            <instance>usb</instance>
+        </interface>
+        <interface>
+            <name>IConfig</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="aidl">
+        <name>android.hardware.audio.effect</name>
+        <version>1-3</version>
+        <interface>
+            <name>IFactory</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="aidl" updatable-via-apex="true">
+         <name>android.hardware.authsecret</name>
+         <version>1</version>
+         <interface>
+             <name>IAuthSecret</name>
+             <instance>default</instance>
+         </interface>
+    </hal>
+    <hal format="aidl">
+        <name>android.hardware.automotive.audiocontrol</name>
+        <version>2-5</version>
+        <interface>
+            <name>IAudioControl</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="aidl">
+        <name>android.hardware.automotive.can</name>
+        <version>1</version>
+        <interface>
+            <name>ICanController</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="aidl">
+        <name>android.hardware.automotive.evs</name>
+        <version>1-2</version>
+        <interface>
+            <name>IEvsEnumerator</name>
+            <regex-instance>[a-z]+/[0-9]+</regex-instance>
+        </interface>
+    </hal>
+    <hal format="aidl">
+        <name>android.hardware.macsec</name>
+        <version>1</version>
+        <interface>
+            <name>IMacsecPskPlugin</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="aidl">
+        <name>android.hardware.automotive.occupant_awareness</name>
+        <version>1</version>
+        <interface>
+            <name>IOccupantAwareness</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="aidl">
+        <name>android.hardware.automotive.vehicle</name>
+        <version>1-4</version>
+        <interface>
+            <name>IVehicle</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="aidl">
+        <name>android.hardware.automotive.remoteaccess</name>
+        <version>1-2</version>
+        <interface>
+            <name>IRemoteAccess</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="aidl">
+        <name>android.hardware.automotive.ivn</name>
+        <interface>
+            <name>IIvnAndroidDevice</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="aidl" updatable-via-apex="true">
+        <name>android.hardware.biometrics.face</name>
+        <version>3-4</version>
+        <interface>
+            <name>IFace</name>
+            <instance>default</instance>
+            <instance>virtual</instance>
+        </interface>
+    </hal>
+    <hal format="aidl" updatable-via-apex="true">
+        <name>android.hardware.biometrics.fingerprint</name>
+        <version>3-5</version>
+        <interface>
+            <name>IFingerprint</name>
+            <instance>default</instance>
+            <instance>virtual</instance>
+        </interface>
+    </hal>
+    <hal format="aidl">
+        <name>android.hardware.bluetooth</name>
+        <interface>
+            <name>IBluetoothHci</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="aidl">
+        <name>android.hardware.bluetooth.audio</name>
+        <version>3-5</version>
+        <interface>
+            <name>IBluetoothAudioProviderFactory</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="aidl">
+        <name>android.hardware.bluetooth.ranging</name>
+        <version>1-2</version>
+        <interface>
+            <name>IBluetoothChannelSounding</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="aidl">
+        <name>android.hardware.bluetooth.socket</name>
+        <version>1</version>
+        <interface>
+            <name>IBluetoothSocket</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="aidl">
+        <name>android.hardware.bluetooth.finder</name>
+        <version>1</version>
+        <interface>
+            <name>IBluetoothFinder</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="aidl">
+        <name>android.hardware.bluetooth.lmp_event</name>
+        <version>1</version>
+        <interface>
+            <name>IBluetoothLmpEvent</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="aidl">
+        <name>android.hardware.boot</name>
+        <interface>
+            <name>IBootControl</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="aidl">
+        <name>android.hardware.broadcastradio</name>
+        <version>1-3</version>
+        <interface>
+            <name>IBroadcastRadio</name>
+            <regex-instance>.*</regex-instance>
+        </interface>
+    </hal>
+    <hal format="aidl" updatable-via-apex="true">
+        <name>android.hardware.camera.provider</name>
+        <version>1-3</version>
+        <interface>
+            <name>ICameraProvider</name>
+            <regex-instance>[^/]+/[0-9]+</regex-instance>
+        </interface>
+    </hal>
+    <hal format="aidl">
+        <name>android.hardware.cas</name>
+        <interface>
+            <name>IMediaCasService</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="aidl">
+        <name>android.hardware.confirmationui</name>
+        <version>1</version>
+        <interface>
+            <name>IConfirmationUI</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="aidl">
+        <name>android.hardware.contexthub</name>
+        <version>3-4</version>
+        <interface>
+            <name>IContextHub</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="aidl" updatable-via-apex="true">
+        <name>android.hardware.drm</name>
+        <version>1</version>
+        <interface>
+            <name>IDrmFactory</name>
+            <regex-instance>.*</regex-instance>
+        </interface>
+    </hal>
+    <hal format="aidl">
+        <name>android.hardware.dumpstate</name>
+        <interface>
+            <name>IDumpstateDevice</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="aidl">
+        <name>android.hardware.gatekeeper</name>
+        <version>1</version>
+        <interface>
+            <name>IGatekeeper</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="aidl">
+        <name>android.hardware.gnss</name>
+        <version>2-5</version>
+        <interface>
+            <name>IGnss</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="aidl">
+        <name>android.hardware.graphics.allocator</name>
+        <version>1-2</version>
+        <interface>
+            <name>IAllocator</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="aidl">
+        <name>android.hardware.graphics.composer3</name>
+        <version>4</version>
+        <interface>
+            <name>IComposer</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="aidl">
+        <name>android.hardware.health</name>
+        <version>3-4</version>
+        <interface>
+            <name>IHealth</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="aidl">
+        <name>android.hardware.health.storage</name>
+        <version>1</version>
+        <interface>
+            <name>IStorage</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="aidl">
+        <name>android.hardware.identity</name>
+        <version>1-5</version>
+        <interface>
+            <name>IIdentityCredentialStore</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="aidl">
+        <name>android.hardware.net.nlinterceptor</name>
+        <interface>
+            <name>IInterceptor</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="aidl">
+        <name>android.hardware.oemlock</name>
+        <version>1</version>
+        <interface>
+            <name>IOemLock</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="aidl">
+        <name>android.hardware.ir</name>
+        <version>1</version>
+        <interface>
+            <name>IConsumerIr</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="aidl">
+        <name>android.hardware.input.processor</name>
+        <version>1</version>
+        <interface>
+            <name>IInputProcessor</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="aidl">
+        <name>android.hardware.security.secretkeeper</name>
+        <version>1-2</version>
+        <interface>
+            <name>ISecretkeeper</name>
+            <instance>default</instance>
+            <instance>nonsecure</instance>
+        </interface>
+    </hal>
+    <hal format="aidl" updatable-via-apex="true">
+        <name>android.hardware.security.keymint</name>
+        <version>1-4</version>
+        <interface>
+            <name>IKeyMintDevice</name>
+            <instance>default</instance>
+            <instance>strongbox</instance>
+        </interface>
+    </hal>
+    <hal format="aidl" updatable-via-apex="true">
+        <name>android.hardware.security.keymint</name>
+        <version>1-3</version>
+        <interface>
+            <name>IRemotelyProvisionedComponent</name>
+            <instance>default</instance>
+            <instance>strongbox</instance>
+        </interface>
+    </hal>
+    <hal format="aidl">
+        <name>android.hardware.light</name>
+        <version>2</version>
+        <interface>
+            <name>ILights</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="aidl">
+        <name>android.hardware.media.c2</name>
+        <version>1</version>
+        <interface>
+            <name>IComponentStore</name>
+            <regex-instance>default[0-9]*</regex-instance>
+            <regex-instance>vendor[0-9]*_software</regex-instance>
+        </interface>
+    </hal>
+    <hal format="aidl">
+        <name>android.hardware.memtrack</name>
+        <version>1</version>
+        <interface>
+            <name>IMemtrack</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="aidl" updatable-via-apex="true">
+        <name>android.hardware.neuralnetworks</name>
+        <version>1-4</version>
+        <interface>
+            <name>IDevice</name>
+            <regex-instance>.*</regex-instance>
+        </interface>
+    </hal>
+    <hal format="aidl" updatable-via-apex="true">
+        <name>android.hardware.nfc</name>
+        <version>1-2</version>
+        <interface>
+            <name>INfc</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="aidl">
+        <name>android.hardware.power</name>
+        <version>5-6</version>
+        <interface>
+            <name>IPower</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="aidl">
+        <name>android.hardware.power.stats</name>
+        <version>2</version>
+        <interface>
+            <name>IPowerStats</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="aidl">
+        <name>android.hardware.radio.config</name>
+        <version>3-4</version>
+        <interface>
+            <name>IRadioConfig</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="aidl">
+        <name>android.hardware.radio.data</name>
+        <version>3-4</version>
+        <interface>
+            <name>IRadioData</name>
+            <instance>slot1</instance>
+            <instance>slot2</instance>
+            <instance>slot3</instance>
+        </interface>
+    </hal>
+    <hal format="aidl">
+        <name>android.hardware.radio.messaging</name>
+        <version>3-4</version>
+        <interface>
+            <name>IRadioMessaging</name>
+            <instance>slot1</instance>
+            <instance>slot2</instance>
+            <instance>slot3</instance>
+        </interface>
+    </hal>
+    <hal format="aidl">
+        <name>android.hardware.radio.modem</name>
+        <version>3-4</version>
+        <interface>
+            <name>IRadioModem</name>
+            <instance>slot1</instance>
+            <instance>slot2</instance>
+            <instance>slot3</instance>
+        </interface>
+    </hal>
+    <hal format="aidl">
+        <name>android.hardware.radio.network</name>
+        <version>3-4</version>
+        <interface>
+            <name>IRadioNetwork</name>
+            <instance>slot1</instance>
+            <instance>slot2</instance>
+            <instance>slot3</instance>
+        </interface>
+    </hal>
+    <hal format="aidl">
+        <name>android.hardware.radio.sim</name>
+        <version>3-4</version>
+        <interface>
+            <name>IRadioSim</name>
+            <instance>slot1</instance>
+            <instance>slot2</instance>
+            <instance>slot3</instance>
+        </interface>
+    </hal>
+    <hal format="aidl">
+        <name>android.hardware.radio.sap</name>
+        <version>1</version>
+        <interface>
+            <name>ISap</name>
+            <instance>slot1</instance>
+            <instance>slot2</instance>
+            <instance>slot3</instance>
+        </interface>
+    </hal>
+    <hal format="aidl">
+        <name>android.hardware.radio.voice</name>
+        <version>3-4</version>
+        <interface>
+            <name>IRadioVoice</name>
+            <instance>slot1</instance>
+            <instance>slot2</instance>
+            <instance>slot3</instance>
+        </interface>
+    </hal>
+    <hal format="aidl">
+        <name>android.hardware.radio.ims</name>
+        <version>2-3</version>
+        <interface>
+            <name>IRadioIms</name>
+            <instance>slot1</instance>
+            <instance>slot2</instance>
+            <instance>slot3</instance>
+        </interface>
+    </hal>
+    <hal format="aidl">
+        <name>android.hardware.radio.ims.media</name>
+        <version>2-3</version>
+        <interface>
+            <name>IImsMedia</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="aidl">
+        <name>android.hardware.rebootescrow</name>
+        <version>1</version>
+        <interface>
+            <name>IRebootEscrow</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="aidl">
+        <name>android.hardware.secure_element</name>
+        <version>1</version>
+        <interface>
+            <name>ISecureElement</name>
+            <regex-instance>eSE[1-9][0-9]*</regex-instance>
+            <regex-instance>SIM[1-9][0-9]*</regex-instance>
+        </interface>
+    </hal>
+    <hal format="aidl" updatable-via-apex="true">
+        <name>android.hardware.security.authgraph</name>
+        <version>1</version>
+        <interface>
+            <name>IAuthGraphKeyExchange</name>
+            <instance>nonsecure</instance>
+        </interface>
+    </hal>
+    <hal format="aidl">
+        <name>android.hardware.security.see.hwcrypto</name>
+        <version>1</version>
+        <interface>
+            <name>IHwCryptoKey</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="aidl" updatable-via-apex="true">
+        <name>android.hardware.security.secureclock</name>
+        <version>1</version>
+        <interface>
+            <name>ISecureClock</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="aidl" updatable-via-apex="true">
+        <name>android.hardware.security.sharedsecret</name>
+        <version>1</version>
+        <interface>
+            <name>ISharedSecret</name>
+            <instance>default</instance>
+            <instance>strongbox</instance>
+            <regex-instance>.*</regex-instance>
+        </interface>
+    </hal>
+    <hal format="aidl">
+        <name>android.hardware.sensors</name>
+        <version>2-3</version>
+        <interface>
+            <name>ISensors</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="aidl">
+         <name>android.hardware.soundtrigger3</name>
+         <version>1-3</version>
+         <interface>
+             <name>ISoundTriggerHw</name>
+             <instance>default</instance>
+         </interface>
+    </hal>
+    <hal format="aidl">
+        <name>android.hardware.tetheroffload</name>
+        <version>1</version>
+        <interface>
+            <name>IOffload</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="aidl">
+        <name>android.hardware.thermal</name>
+        <version>3</version>
+        <interface>
+            <name>IThermal</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="aidl" updatable-via-apex="true">
+        <name>android.hardware.threadnetwork</name>
+        <version>1</version>
+        <interface>
+            <name>IThreadChip</name>
+            <regex-instance>chip[0-9]+</regex-instance>
+        </interface>
+    </hal>
+    <hal format="aidl">
+        <name>android.hardware.tv.hdmi.cec</name>
+        <version>1</version>
+        <interface>
+            <name>IHdmiCec</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="aidl">
+        <name>android.hardware.tv.hdmi.earc</name>
+        <version>1</version>
+        <interface>
+            <name>IEArc</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="aidl">
+        <name>android.hardware.tv.hdmi.connection</name>
+        <version>1</version>
+        <interface>
+            <name>IHdmiConnection</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="aidl">
+        <name>android.hardware.tv.tuner</name>
+        <version>1-3</version>
+        <interface>
+            <name>ITuner</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="aidl">
+        <name>android.hardware.tv.input</name>
+        <version>1-3</version>
+        <interface>
+            <name>ITvInput</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="aidl">
+        <name>android.hardware.usb</name>
+        <version>1-3</version>
+        <interface>
+            <name>IUsb</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="aidl">
+        <name>android.hardware.usb.gadget</name>
+        <interface>
+            <name>IUsbGadget</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="aidl">
+        <name>android.hardware.vibrator</name>
+        <version>1-3</version>
+        <interface>
+            <name>IVibrator</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="aidl">
+        <name>android.hardware.vibrator</name>
+        <version>1-3</version>
+        <interface>
+            <name>IVibratorManager</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="aidl">
+      <name>android.hardware.virtualization.capabilities</name>
+        <version>1</version>
+        <interface>
+            <name>IVmCapabilitiesService</name>
+            <instance>default</instance>
+            <instance>noop</instance>
+        </interface>
+    </hal>
+    <hal format="aidl">
+        <name>android.hardware.weaver</name>
+        <version>2</version>
+        <interface>
+            <name>IWeaver</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="aidl" updatable-via-apex="true">
+        <name>android.hardware.wifi</name>
+        <version>2-3</version>
+        <interface>
+            <name>IWifi</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="aidl" updatable-via-apex="true">
+        <name>android.hardware.uwb</name>
+        <version>1</version>
+        <interface>
+            <name>IUwb</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="aidl">
+        <name>android.hardware.wifi.hostapd</name>
+        <version>2-3</version>
+        <interface>
+            <name>IHostapd</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="aidl">
+        <name>android.hardware.wifi.supplicant</name>
+        <version>3-4</version>
+        <interface>
+            <name>ISupplicant</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="aidl" optional="true">
+        <name>android.hardware.tv.mediaquality</name>
+        <version>1</version>
+        <interface>
+            <name>IMediaQuality</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <!-- The native mapper HAL must exist on the device -->
+    <hal format="native">
+        <name>mapper</name>
+        <version>5.0</version>
+        <interface>
+            <regex-instance>.*</regex-instance>
+        </interface>
+    </hal>
+</compatibility-matrix>
diff --git a/health/aidl/default/LinkedCallback.h b/health/aidl/default/LinkedCallback.h
index 8c9c997..6b17be0 100644
--- a/health/aidl/default/LinkedCallback.h
+++ b/health/aidl/default/LinkedCallback.h
@@ -36,7 +36,7 @@
     // cookie when it's unlinked.
     static ::android::base::Result<LinkedCallback*> Make(
             std::shared_ptr<Health> service, std::shared_ptr<IHealthInfoCallback> callback);
-    // On callback died, unreigster it from the service.
+    // On callback died, unregister it from the service.
     void OnCallbackDied();
 
   private:
diff --git a/health/aidl/vts/functional/VtsHalHealthTargetTest.cpp b/health/aidl/vts/functional/VtsHalHealthTargetTest.cpp
index a44cd5e..fc735f7 100644
--- a/health/aidl/vts/functional/VtsHalHealthTargetTest.cpp
+++ b/health/aidl/vts/functional/VtsHalHealthTargetTest.cpp
@@ -363,8 +363,14 @@
  * Tests the values returned by getHingeInfo() from interface IHealth.
  */
 TEST_P(HealthAidl, getHingeInfo) {
+    int32_t version{};
+    auto status = health->getInterfaceVersion(&version);
+    ASSERT_TRUE(status.isOk()) << status;
+    if (version < 4) {
+        GTEST_SKIP() << "Support for hinge health hal is added in v4";
+    }
     std::vector<HingeInfo> value;
-    auto status = health->getHingeInfo(&value);
+    status = health->getHingeInfo(&value);
     ASSERT_THAT(status, AnyOf(IsOk(), ExceptionIs(EX_UNSUPPORTED_OPERATION)));
     if (!status.isOk()) return;
     for (auto& hinge : value) {
diff --git a/macsec/aidl/default/MacsecPskPlugin.cpp b/macsec/aidl/default/MacsecPskPlugin.cpp
index 82d2545..8cb5283 100644
--- a/macsec/aidl/default/MacsecPskPlugin.cpp
+++ b/macsec/aidl/default/MacsecPskPlugin.cpp
@@ -18,7 +18,6 @@
 #include <openssl/cipher.h>
 #include <openssl/mem.h>
 
-#include <android-base/format.h>
 #include <android-base/logging.h>
 
 namespace aidl::android::hardware::macsec {
diff --git a/macsec/aidl/default/service.cpp b/macsec/aidl/default/service.cpp
index faf3a09..9d5d3bf 100644
--- a/macsec/aidl/default/service.cpp
+++ b/macsec/aidl/default/service.cpp
@@ -20,12 +20,11 @@
 #include <android/binder_manager.h>
 #include <android/binder_process.h>
 
-namespace android::hardware::macsec {
-
 using namespace std::string_literals;
+using namespace android;
 using ::aidl::android::hardware::macsec::MacsecPskPlugin;
 
-extern "C" int main() {
+int main() {
     base::SetDefaultTag("MacsecPskPlugin");
     base::SetMinimumLogSeverity(base::VERBOSE);
 
@@ -40,4 +39,3 @@
     LOG(FATAL) << "MacsecPskPlugin exited unexpectedly!";
     return EXIT_FAILURE;
 }
-}  // namespace android::hardware::macsec
diff --git a/nfc/aidl/vts/functional/VtsNfcBehaviorChangesTest.cpp b/nfc/aidl/vts/functional/VtsNfcBehaviorChangesTest.cpp
index ff2522c..a61f8ee 100644
--- a/nfc/aidl/vts/functional/VtsNfcBehaviorChangesTest.cpp
+++ b/nfc/aidl/vts/functional/VtsNfcBehaviorChangesTest.cpp
@@ -114,16 +114,26 @@
     }
 }
 
-void static nfaVSCallback(uint8_t event, uint16_t /* param_len */, uint8_t* p_param) {
+void static nfaVSCallback(uint8_t event, uint16_t param_len, uint8_t* p_param) {
     switch (event & NCI_OID_MASK) {
         case NCI_MSG_PROP_ANDROID: {
             uint8_t android_sub_opcode = p_param[3];
             switch (android_sub_opcode) {
                 case NCI_ANDROID_PASSIVE_OBSERVE: {
-                    sVSCmdStatus = p_param[4];
-                    LOG(INFO) << StringPrintf("Observe mode RSP: status: %x", sVSCmdStatus);
-                    SyncEventGuard guard(sNfaVsCommand);
-                    sNfaVsCommand.notifyOne();
+                    if (param_len == 5) {
+                        if ((p_param[0] & NCI_MT_MASK) == (NCI_MT_RSP << NCI_MT_SHIFT)) {
+                            sVSCmdStatus = p_param[4];
+                            LOG(INFO) << StringPrintf("Observe mode RSP: status: %x", sVSCmdStatus);
+                            SyncEventGuard guard(sNfaVsCommand);
+                            sNfaVsCommand.notifyOne();
+                        } else {
+                            LOG(WARNING) << StringPrintf(
+                                    "Observe Mode RSP has incorrect message type: %x", p_param[0]);
+                        }
+                    } else {
+                        LOG(WARNING) << StringPrintf("Observe Mode RSP has incorrect length: %d",
+                                                     param_len);
+                    }
                 } break;
                 case NCI_ANDROID_POLLING_FRAME_NTF: {
                     // TODO
@@ -152,12 +162,11 @@
         }
     }
 
-    uint8_t cmd[] = {(NCI_MT_CMD << NCI_MT_SHIFT) | NCI_GID_PROP, NCI_MSG_PROP_ANDROID,
-                     NCI_ANDROID_PASSIVE_OBSERVE_PARAM_SIZE, NCI_ANDROID_PASSIVE_OBSERVE,
+    uint8_t cmd[] = {NCI_ANDROID_PASSIVE_OBSERVE,
                      static_cast<uint8_t>(enable ? NCI_ANDROID_PASSIVE_OBSERVE_PARAM_ENABLE
                                                  : NCI_ANDROID_PASSIVE_OBSERVE_PARAM_DISABLE)};
 
-    status = NFA_SendRawVsCommand(sizeof(cmd), cmd, nfaVSCallback);
+    status = NFA_SendVsCommand(NCI_MSG_PROP_ANDROID, sizeof(cmd), cmd, nfaVSCallback);
 
     if (status == NFA_STATUS_OK) {
         if (!sNfaVsCommand.wait(1000)) {
diff --git a/radio/aidl/vts/radio_network_test.cpp b/radio/aidl/vts/radio_network_test.cpp
index 6b0b33a..2b4dc42 100644
--- a/radio/aidl/vts/radio_network_test.cpp
+++ b/radio/aidl/vts/radio_network_test.cpp
@@ -30,9 +30,17 @@
 const RadioAccessSpecifierBands EUTRAN_BAND_20 =
         RadioAccessSpecifierBands::make<RadioAccessSpecifierBands::eutranBands>(
                 {EutranBands::BAND_20});
+
+// Specifiers with valid channel numbers
 const RadioAccessSpecifier EUTRAN_SPECIFIER_17 = {
-        .accessNetwork = AccessNetwork::EUTRAN, .bands = EUTRAN_BAND_17, .channels = {1, 2}};
+        .accessNetwork = AccessNetwork::EUTRAN, .bands = EUTRAN_BAND_17, .channels = {5755}};
 const RadioAccessSpecifier EUTRAN_SPECIFIER_20 = {
+        .accessNetwork = AccessNetwork::EUTRAN, .bands = EUTRAN_BAND_20, .channels = {6250, 6300}};
+
+// Specifiers with invalid channel numbers
+const RadioAccessSpecifier INVALID_EUTRAN_SPECIFIER_17 = {
+        .accessNetwork = AccessNetwork::EUTRAN, .bands = EUTRAN_BAND_17, .channels = {1, 2}};
+const RadioAccessSpecifier INVALID_EUTRAN_SPECIFIER_20 = {
         .accessNetwork = AccessNetwork::EUTRAN, .bands = EUTRAN_BAND_20, .channels = {128, 129}};
 }  // namespace
 
@@ -1008,14 +1016,14 @@
     EXPECT_EQ(serial, radioRsp_network->rspInfo.serial);
     ALOGI("setSystemSelectionChannels, rspInfo.error = %s\n",
           toString(radioRsp_network->rspInfo.error).c_str());
-    ASSERT_TRUE(CheckAnyOfErrors(
-            radioRsp_network->rspInfo.error,
-            {RadioError::NONE, RadioError::RADIO_NOT_AVAILABLE, RadioError::INTERNAL_ERR}));
+    ASSERT_TRUE(CheckAnyOfErrors(radioRsp_network->rspInfo.error,
+                                 {RadioError::NONE, RadioError::RADIO_NOT_AVAILABLE,
+                                  RadioError::INTERNAL_ERR, RadioError::INVALID_ARGUMENTS}));
 
+    // If the channels were set successfully, then return them to the original values.
     if (radioRsp_network->rspInfo.error == RadioError::NONE) {
         serial = GetRandomSerialNumber();
-        res = radio_network->setSystemSelectionChannels(
-                serial, false, {::EUTRAN_SPECIFIER_17, ::EUTRAN_SPECIFIER_20});
+        res = radio_network->setSystemSelectionChannels(serial, true, originalSpecifiers);
         ASSERT_OK(res);
         EXPECT_EQ(std::cv_status::no_timeout, wait());
         EXPECT_EQ(RadioResponseType::SOLICITED, radioRsp_network->rspInfo.type);
@@ -1024,12 +1032,6 @@
               toString(radioRsp_network->rspInfo.error).c_str());
         EXPECT_EQ(RadioError::NONE, radioRsp_network->rspInfo.error);
     }
-
-    serial = GetRandomSerialNumber();
-    res = radio_network->setSystemSelectionChannels(serial, true, originalSpecifiers);
-    EXPECT_EQ(std::cv_status::no_timeout, wait());
-    EXPECT_EQ(RadioResponseType::SOLICITED, radioRsp_network->rspInfo.type);
-    EXPECT_EQ(serial, radioRsp_network->rspInfo.serial);
 }
 
 /*
@@ -1092,9 +1094,19 @@
         }
     }
 
+    // get aidl version
+    int32_t aidl_version;
+    ndk::ScopedAStatus aidl_status = radio_network->getInterfaceVersion(&aidl_version);
+    ASSERT_OK(aidl_status);
+
     serial = GetRandomSerialNumber();
 
-    NetworkScanRequest request = {.type = NetworkScanRequest::SCAN_TYPE_ONE_SHOT, .interval = 60};
+    // no specifier
+    NetworkScanRequest request = {.type = NetworkScanRequest::SCAN_TYPE_ONE_SHOT,
+                                  .interval = 60,
+                                  .maxSearchTime = 360,
+                                  .incrementalResults = false,
+                                  .incrementalResultsPeriodicity = 10};
 
     ndk::ScopedAStatus res = radio_network->startNetworkScan(serial, request);
     ASSERT_OK(res);
@@ -1111,6 +1123,37 @@
         ASSERT_TRUE(
                 CheckAnyOfErrors(radioRsp_network->rspInfo.error, {RadioError::INVALID_ARGUMENTS}));
     }
+
+    // invalid specifier
+    request = {.type = NetworkScanRequest::SCAN_TYPE_ONE_SHOT,
+               .interval = 60,
+               .specifiers = {::INVALID_EUTRAN_SPECIFIER_17, ::INVALID_EUTRAN_SPECIFIER_20},
+               .maxSearchTime = 360,
+               .incrementalResults = false,
+               .incrementalResultsPeriodicity = 10};
+
+    res = radio_network->startNetworkScan(serial, request);
+    ASSERT_OK(res);
+    EXPECT_EQ(std::cv_status::no_timeout, wait());
+    EXPECT_EQ(RadioResponseType::SOLICITED, radioRsp_network->rspInfo.type);
+    EXPECT_EQ(serial, radioRsp_network->rspInfo.serial);
+    ALOGI("startNetworkScan_InvalidArgument, rspInfo.error = %s\n",
+          toString(radioRsp_network->rspInfo.error).c_str());
+
+    if (cardStatus.cardState == CardStatus::STATE_ABSENT) {
+        ASSERT_TRUE(CheckAnyOfErrors(radioRsp_network->rspInfo.error,
+                                     {RadioError::SIM_ABSENT, RadioError::INVALID_ARGUMENTS}));
+    } else if (cardStatus.cardState == CardStatus::STATE_PRESENT) {
+        // Older HAL versions are known to silently accept invalid EUTRAN channels in the network
+        // network scan request.
+        if (aidl_version < 5) {
+            ASSERT_TRUE(CheckAnyOfErrors(radioRsp_network->rspInfo.error,
+                                         {RadioError::NONE, RadioError::INVALID_ARGUMENTS}));
+        } else {
+            ASSERT_TRUE(CheckAnyOfErrors(radioRsp_network->rspInfo.error,
+                                         {RadioError::INVALID_ARGUMENTS}));
+        }
+    }
 }
 
 /*
diff --git a/security/keymint/aidl/Android.bp b/security/keymint/aidl/Android.bp
index 14afc92..5236e90 100644
--- a/security/keymint/aidl/Android.bp
+++ b/security/keymint/aidl/Android.bp
@@ -103,3 +103,13 @@
         "android.hardware.security.keymint-V4-rust",
     ],
 }
+
+// java_defaults that includes the latest KeyMint AIDL library.
+// Modules that depend on KeyMint directly can include this java_defaults to avoid
+// managing dependency versions explicitly.
+java_defaults {
+    name: "keymint_use_latest_hal_aidl_java",
+    static_libs: [
+        "android.hardware.security.keymint-V4-java",
+    ],
+}
diff --git a/security/keymint/aidl/android/hardware/security/keymint/IKeyMintDevice.aidl b/security/keymint/aidl/android/hardware/security/keymint/IKeyMintDevice.aidl
index cafec70..fc703e9 100644
--- a/security/keymint/aidl/android/hardware/security/keymint/IKeyMintDevice.aidl
+++ b/security/keymint/aidl/android/hardware/security/keymint/IKeyMintDevice.aidl
@@ -87,12 +87,14 @@
  *        SHA-2 256.
  *      - Unpadded, RSAES-OAEP and RSAES-PKCS1-v1_5 padding modes for RSA encryption.
  *
- * o   ECDSA
+ * o   ECDSA and ECDH
  *
+ *      - IKeyMintDevices must support elliptic curve signing (Purpose::SIGN, Purpose::ATTEST_KEY)
+ *        and key agreement operations (Purpose::AGREE_KEY).
  *      - TRUSTED_ENVIRONMENT IKeyMintDevices must support NIST curves P-224, P-256, P-384 and
  *        P-521.  STRONGBOX IKeyMintDevices must support NIST curve P-256.
- *      - TRUSTED_ENVIRONMENT IKeyMintDevices must support SHA1, SHA-2 224, SHA-2 256, SHA-2
- *        384 and SHA-2 512 digest modes.  STRONGBOX IKeyMintDevices must support SHA-2 256.
+ *      - For signing, TRUSTED_ENVIRONMENT IKeyMintDevices must support SHA1, SHA-2 224, SHA-2 256,
+ *        SHA-2 384 and SHA-2 512 digest modes.  STRONGBOX IKeyMintDevices must support SHA-2 256.
  *      - TRUSTED_ENVRIONMENT IKeyMintDevices must support curve 25519 for Purpose::SIGN (Ed25519,
  *        as specified in RFC 8032), Purpose::ATTEST_KEY (Ed25519) or for KeyPurpose::AGREE_KEY
  *        (X25519, as specified in RFC 7748).  However, a key must have exactly one of these
@@ -302,12 +304,12 @@
      *   PaddingMode::RSA_OAEP, PaddingMode::RSA_PSS, PaddingMode::RSA_PKCS1_1_5_ENCRYPT and
      *   PaddingMode::RSA_PKCS1_1_5_SIGN for RSA keys.
      *
-     * == ECDSA Keys ==
+     * == ECDSA/ECDH Keys ==
      *
-     * Tag::EC_CURVE must be provided to generate an ECDSA key.  If it is not provided, generateKey
-     * must return ErrorCode::UNSUPPORTED_KEY_SIZE or ErrorCode::UNSUPPORTED_EC_CURVE. TEE
-     * IKeyMintDevice implementations must support all required curves.  StrongBox implementations
-     * must support P_256 and no other curves.
+     * Tag::EC_CURVE must be provided to generate an elliptic curve key.  If it is not provided,
+     * generateKey must return ErrorCode::UNSUPPORTED_KEY_SIZE or ErrorCode::UNSUPPORTED_EC_CURVE.
+     * TEE IKeyMintDevice implementations must support all required curves.  StrongBox
+     * implementations must support P_256 and no other curves.
      *
      * Tag::CERTIFICATE_NOT_BEFORE and Tag::CERTIFICATE_NOT_AFTER must be provided to specify the
      * valid date range for the returned X.509 certificate holding the public key. If omitted,
@@ -318,10 +320,10 @@
      * than one purpose should be rejected with ErrorCode::INCOMPATIBLE_PURPOSE.
      * StrongBox implementation do not support CURVE_25519.
      *
-     * Tag::DIGEST specifies digest algorithms that may be used with the new key.  TEE
-     * IKeyMintDevice implementations must support all Digest values (see Digest.aidl) for ECDSA
-     * keys; Ed25519 keys only support Digest::NONE. StrongBox IKeyMintDevice implementations must
-     * support SHA_2_256.
+     * Tag::DIGEST specifies digest algorithms that may be used with the new key when used for
+     * signing.  TEE IKeyMintDevice implementations must support all Digest values (see Digest.aidl)
+     * for ECDSA keys; Ed25519 keys only support Digest::NONE. StrongBox IKeyMintDevice
+     * implementations must support SHA_2_256.
      *
      * == AES Keys ==
      *
diff --git a/security/keymint/support/remote_prov_utils.cpp b/security/keymint/support/remote_prov_utils.cpp
index 5afaf31..dcf8674 100644
--- a/security/keymint/support/remote_prov_utils.cpp
+++ b/security/keymint/support/remote_prov_utils.cpp
@@ -14,6 +14,7 @@
  * limitations under the License.
  */
 
+#include <format>
 #include <iomanip>
 #include <iterator>
 #include <memory>
@@ -535,7 +536,7 @@
     switch (rpcHardwareInfo.versionNumber) {
         case 3:
             if (isTeeDeviceInfo(*parsed) && parsed->size() != kNumTeeDeviceInfoEntries) {
-                error += fmt::format(
+                error += std::format(
                         "Err: Incorrect number of device info entries. Expected {} but got "
                         "{}\n",
                         kNumTeeDeviceInfoEntries, parsed->size());
@@ -544,7 +545,7 @@
             // may omit `os_version`
             if (!isTeeDeviceInfo(*parsed) && (parsed->size() != kNumTeeDeviceInfoEntries &&
                                               parsed->size() != kNumTeeDeviceInfoEntries - 1)) {
-                error += fmt::format(
+                error += std::format(
                         "Err: Incorrect number of device info entries. Expected {} or {} but got "
                         "{}\n",
                         kNumTeeDeviceInfoEntries - 1, kNumTeeDeviceInfoEntries, parsed->size());
diff --git a/security/rkp/aidl/vts/functional/VtsRemotelyProvisionedComponentTests.cpp b/security/rkp/aidl/vts/functional/VtsRemotelyProvisionedComponentTests.cpp
index 66f7539..7ef445e 100644
--- a/security/rkp/aidl/vts/functional/VtsRemotelyProvisionedComponentTests.cpp
+++ b/security/rkp/aidl/vts/functional/VtsRemotelyProvisionedComponentTests.cpp
@@ -344,6 +344,53 @@
     ASSERT_TRUE(*result);
 }
 
+/**
+ * Check that ro.boot.vbmeta.device_state is not "locked" or ro.boot.verifiedbootstate
+ * is not "green" if and only if the mode on at least one certificate in the DICE chain
+ * is non-normal.
+ */
+TEST(NonParameterizedTests, unlockedBootloaderStatesImpliesNonnormalRkpVmDiceChain) {
+    if (!AServiceManager_isDeclared(RKPVM_INSTANCE_NAME.c_str())) {
+        GTEST_SKIP() << "The RKP VM (" << RKPVM_INSTANCE_NAME << ") is not present on this device.";
+    }
+
+    auto rpc = getHandle<IRemotelyProvisionedComponent>(RKPVM_INSTANCE_NAME);
+    ASSERT_NE(rpc, nullptr) << "The RKP VM (" << RKPVM_INSTANCE_NAME << ") RPC is unavailable.";
+
+    RpcHardwareInfo hardwareInfo;
+    auto status = rpc->getHardwareInfo(&hardwareInfo);
+    if (!status.isOk()) {
+        GTEST_SKIP() << "The RKP VM is not supported on this system.";
+    }
+
+    auto challenge = randomBytes(MAX_CHALLENGE_SIZE);
+    bytevec csr;
+    auto rkpVmStatus = rpc->generateCertificateRequestV2({} /* keysToSign */, challenge, &csr);
+    ASSERT_TRUE(rkpVmStatus.isOk()) << status.getDescription();
+
+    auto isProper = isCsrWithProperDiceChain(csr, RKPVM_INSTANCE_NAME);
+    ASSERT_TRUE(isProper) << isProper.message();
+    if (!*isProper) {
+        GTEST_SKIP() << "Skipping test: Only a proper DICE chain has a mode set.";
+    }
+
+    auto nonNormalMode = hasNonNormalModeInDiceChain(csr, RKPVM_INSTANCE_NAME);
+    ASSERT_TRUE(nonNormalMode) << nonNormalMode.message();
+
+    auto deviceState = ::android::base::GetProperty("ro.boot.vbmeta.device_state", "");
+    auto verifiedBootState = ::android::base::GetProperty("ro.boot.verifiedbootstate", "");
+
+    ASSERT_TRUE(!deviceState.empty());
+    ASSERT_TRUE(!verifiedBootState.empty());
+
+    ASSERT_EQ(deviceState != "locked" || verifiedBootState != "green", *nonNormalMode)
+            << "ro.boot.vbmeta.device_state = '" << deviceState
+            << "' and ro.boot.verifiedbootstate = '" << verifiedBootState << "', but the DICE "
+            << " chain has a " << (*nonNormalMode ? "non-normal" : "normal") << " DICE mode."
+            << " Locked devices must report normal, and unlocked devices must report "
+            << " non-normal.";
+}
+
 using GetHardwareInfoTests = VtsRemotelyProvisionedComponentTests;
 
 INSTANTIATE_REM_PROV_AIDL_TEST(GetHardwareInfoTests);
@@ -849,37 +896,6 @@
 };
 
 /**
- * Check that ro.boot.vbmeta.device_state is not "locked" or ro.boot.verifiedbootstate
- * is not "green" if and only if the mode on at least one certificate in the DICE chain
- * is non-normal.
- */
-TEST_P(CertificateRequestV2Test, DISABLED_unlockedBootloaderStatesImpliesNonnormalDiceChain) {
-    auto challenge = randomBytes(MAX_CHALLENGE_SIZE);
-    bytevec csr;
-    auto status =
-            provisionable_->generateCertificateRequestV2({} /* keysToSign */, challenge, &csr);
-    ASSERT_TRUE(status.isOk()) << status.getDescription();
-
-    auto isProper = isCsrWithProperDiceChain(csr, GetParam());
-    ASSERT_TRUE(isProper) << isProper.message();
-    if (!*isProper) {
-        GTEST_SKIP() << "Skipping test: Only a proper DICE chain has a mode set.";
-    }
-
-    auto nonNormalMode = hasNonNormalModeInDiceChain(csr, GetParam());
-    ASSERT_TRUE(nonNormalMode) << nonNormalMode.message();
-
-    auto deviceState = ::android::base::GetProperty("ro.boot.vbmeta.device_state", "");
-    auto verifiedBootState = ::android::base::GetProperty("ro.boot.verifiedbootstate", "");
-
-    ASSERT_EQ(deviceState != "locked" || verifiedBootState != "green", *nonNormalMode)
-            << "ro.boot.vbmeta.device_state = '" << deviceState
-            << "' and ro.boot.verifiedbootstate = '" << verifiedBootState << "', but it is "
-            << *nonNormalMode
-            << " that the DICE chain has a certificate with a non-normal mode set.";
-}
-
-/**
  * Generate an empty certificate request with all possible length of challenge, and decrypt and
  * verify the structure and content.
  */
diff --git a/security/see/storage/aidl/android/hardware/security/see/storage/IStorageSession.aidl b/security/see/storage/aidl/android/hardware/security/see/storage/IStorageSession.aidl
index 9a8d0d7..b5762aa 100644
--- a/security/see/storage/aidl/android/hardware/security/see/storage/IStorageSession.aidl
+++ b/security/see/storage/aidl/android/hardware/security/see/storage/IStorageSession.aidl
@@ -103,7 +103,8 @@
     /**
      * Renames an existing file.
      *
-     * The file must not already be opened. (If it is, use `IFile::rename`.)
+     * Will return `ILLEGAL_STATE` if the file is already opened. In that case, use `IFile::rename`
+     * instead.
      *
      * @currentPath:
      *     path to the file, relative to filesystem root
diff --git a/wifi/aidl/vts/functional/Android.bp b/wifi/aidl/vts/functional/Android.bp
index 429c0c5..8e12089 100644
--- a/wifi/aidl/vts/functional/Android.bp
+++ b/wifi/aidl/vts/functional/Android.bp
@@ -24,15 +24,12 @@
     default_applicable_licenses: ["hardware_interfaces_license"],
 }
 
-cc_test {
-    name: "VtsHalWifiChipTargetTest",
+cc_defaults {
+    name: "wifi_vendor_hal_vts_test_defaults",
     defaults: [
         "VtsHalTargetTestDefaults",
         "use_libaidlvintf_gtest_helper_static",
     ],
-    srcs: [
-        "wifi_chip_aidl_test.cpp",
-    ],
     shared_libs: [
         "libbinder",
         "libbinder_ndk",
@@ -51,107 +48,39 @@
 }
 
 cc_test {
+    name: "VtsHalWifiTargetTest",
+    defaults: ["wifi_vendor_hal_vts_test_defaults"],
+    srcs: ["wifi_aidl_test.cpp"],
+}
+
+cc_test {
+    name: "VtsHalWifiChipTargetTest",
+    defaults: ["wifi_vendor_hal_vts_test_defaults"],
+    srcs: ["wifi_chip_aidl_test.cpp"],
+}
+
+cc_test {
     name: "VtsHalWifiStaIfaceTargetTest",
-    defaults: [
-        "VtsHalTargetTestDefaults",
-        "use_libaidlvintf_gtest_helper_static",
-    ],
-    srcs: [
-        "wifi_sta_iface_aidl_test.cpp",
-    ],
-    shared_libs: [
-        "libbinder",
-        "libbinder_ndk",
-        "libvndksupport",
-    ],
-    static_libs: [
-        "VtsHalWifiTargetTestUtil",
-        "android.hardware.wifi.common-V2-ndk",
-        "android.hardware.wifi-V3-ndk",
-        "libwifi-system-iface",
-    ],
-    test_suites: [
-        "general-tests",
-        "vts",
-    ],
+    defaults: ["wifi_vendor_hal_vts_test_defaults"],
+    srcs: ["wifi_sta_iface_aidl_test.cpp"],
 }
 
 cc_test {
     name: "VtsHalWifiApIfaceTargetTest",
-    defaults: [
-        "VtsHalTargetTestDefaults",
-        "use_libaidlvintf_gtest_helper_static",
-    ],
-    srcs: [
-        "wifi_ap_iface_aidl_test.cpp",
-    ],
-    shared_libs: [
-        "libbinder",
-        "libbinder_ndk",
-        "libvndksupport",
-    ],
-    static_libs: [
-        "VtsHalWifiTargetTestUtil",
-        "android.hardware.wifi.common-V2-ndk",
-        "android.hardware.wifi-V3-ndk",
-        "libwifi-system-iface",
-    ],
-    test_suites: [
-        "general-tests",
-        "vts",
-    ],
+    defaults: ["wifi_vendor_hal_vts_test_defaults"],
+    srcs: ["wifi_ap_iface_aidl_test.cpp"],
 }
 
 cc_test {
     name: "VtsHalWifiNanIfaceTargetTest",
-    defaults: [
-        "VtsHalTargetTestDefaults",
-        "use_libaidlvintf_gtest_helper_static",
-    ],
-    srcs: [
-        "wifi_nan_iface_aidl_test.cpp",
-    ],
-    shared_libs: [
-        "libbinder",
-        "libbinder_ndk",
-        "libvndksupport",
-    ],
-    static_libs: [
-        "VtsHalWifiTargetTestUtil",
-        "android.hardware.wifi.common-V2-ndk",
-        "android.hardware.wifi-V3-ndk",
-        "libwifi-system-iface",
-    ],
-    test_suites: [
-        "general-tests",
-        "vts",
-    ],
+    defaults: ["wifi_vendor_hal_vts_test_defaults"],
+    srcs: ["wifi_nan_iface_aidl_test.cpp"],
 }
 
 cc_test {
     name: "VtsHalWifiRttControllerTargetTest",
-    defaults: [
-        "VtsHalTargetTestDefaults",
-        "use_libaidlvintf_gtest_helper_static",
-    ],
-    srcs: [
-        "wifi_rtt_controller_aidl_test.cpp",
-    ],
-    shared_libs: [
-        "libbinder",
-        "libbinder_ndk",
-        "libvndksupport",
-    ],
-    static_libs: [
-        "VtsHalWifiTargetTestUtil",
-        "android.hardware.wifi.common-V2-ndk",
-        "android.hardware.wifi-V3-ndk",
-        "libwifi-system-iface",
-    ],
-    test_suites: [
-        "general-tests",
-        "vts",
-    ],
+    defaults: ["wifi_vendor_hal_vts_test_defaults"],
+    srcs: ["wifi_rtt_controller_aidl_test.cpp"],
 }
 
 cc_library_static {
diff --git a/wifi/aidl/vts/functional/wifi_aidl_test.cpp b/wifi/aidl/vts/functional/wifi_aidl_test.cpp
new file mode 100644
index 0000000..64a30ea
--- /dev/null
+++ b/wifi/aidl/vts/functional/wifi_aidl_test.cpp
@@ -0,0 +1,99 @@
+/*
+ * Copyright (C) 2025 The Android Open Source Project
+ *
+ * Licensed under the Staache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <vector>
+
+#include <VtsCoreUtil.h>
+#include <aidl/Gtest.h>
+#include <aidl/Vintf.h>
+#include <aidl/android/hardware/wifi/BnWifiEventCallback.h>
+#include <android/binder_manager.h>
+#include <android/binder_status.h>
+#include <binder/IServiceManager.h>
+#include <binder/ProcessState.h>
+
+#include "wifi_aidl_test_utils.h"
+
+using aidl::android::hardware::wifi::BnWifiEventCallback;
+using aidl::android::hardware::wifi::WifiStatusCode;
+
+class WifiAidlTest : public testing::TestWithParam<std::string> {
+  public:
+    void SetUp() override {
+        instance_name_ = GetParam().c_str();
+        stopWifiService(instance_name_);
+        wifi_ = getWifi(instance_name_);
+        ASSERT_NE(wifi_, nullptr);
+    }
+
+    void TearDown() override { stopWifiService(instance_name_); }
+
+  protected:
+    std::shared_ptr<IWifi> wifi_;
+    const char* instance_name_;
+};
+
+class WifiEventCallback : public BnWifiEventCallback {
+  public:
+    WifiEventCallback() = default;
+
+    ::ndk::ScopedAStatus onFailure(WifiStatusCode /* status */) override {
+        return ndk::ScopedAStatus::ok();
+    }
+    ::ndk::ScopedAStatus onStart() override { return ndk::ScopedAStatus::ok(); }
+    ::ndk::ScopedAStatus onStop() override { return ndk::ScopedAStatus::ok(); }
+    ::ndk::ScopedAStatus onSubsystemRestart(WifiStatusCode /* status */) override {
+        return ndk::ScopedAStatus::ok();
+    }
+};
+
+/*
+ * RegisterEventCallback
+ */
+TEST_P(WifiAidlTest, RegisterEventCallback) {
+    const std::shared_ptr<WifiEventCallback> callback =
+            ndk::SharedRefBase::make<WifiEventCallback>();
+    ASSERT_NE(callback, nullptr);
+    EXPECT_TRUE(wifi_->registerEventCallback(callback).isOk());
+}
+
+/*
+ * IsStarted
+ */
+TEST_P(WifiAidlTest, IsStarted) {
+    // HAL should not be started by default
+    bool isStarted;
+    EXPECT_TRUE(wifi_->isStarted(&isStarted).isOk());
+    EXPECT_FALSE(isStarted);
+
+    // Start wifi by setting up the chip, and verify isStarted
+    auto wifiChip = getWifiChip(instance_name_);
+    EXPECT_NE(wifiChip, nullptr);
+    EXPECT_TRUE(wifi_->isStarted(&isStarted).isOk());
+    EXPECT_TRUE(isStarted);
+}
+
+GTEST_ALLOW_UNINSTANTIATED_PARAMETERIZED_TEST(WifiAidlTest);
+INSTANTIATE_TEST_SUITE_P(WifiTest, WifiAidlTest,
+                         testing::ValuesIn(android::getAidlHalInstanceNames(IWifi::descriptor)),
+                         android::PrintInstanceNameToString);
+
+int main(int argc, char** argv) {
+    ::testing::InitGoogleTest(&argc, argv);
+    android::ProcessState::self()->setThreadPoolMaxThreadCount(1);
+    android::ProcessState::self()->startThreadPool();
+    return RUN_ALL_TESTS();
+}
diff --git a/wifi/aidl/vts/functional/wifi_chip_aidl_test.cpp b/wifi/aidl/vts/functional/wifi_chip_aidl_test.cpp
index 1ef02af..56b8bb1 100644
--- a/wifi/aidl/vts/functional/wifi_chip_aidl_test.cpp
+++ b/wifi/aidl/vts/functional/wifi_chip_aidl_test.cpp
@@ -526,6 +526,9 @@
     status = wifi_chip_->startLoggingToDebugRingBuffer(
             ring_name, WifiDebugRingBufferVerboseLevel::VERBOSE, 5, 1024);
     EXPECT_TRUE(status.isOk() || checkStatusCode(&status, WifiStatusCode::ERROR_NOT_SUPPORTED));
+
+    status = wifi_chip_->stopLoggingToDebugRingBuffer();
+    EXPECT_TRUE(status.isOk() || checkStatusCode(&status, WifiStatusCode::ERROR_NOT_SUPPORTED));
 }
 
 /*
diff --git a/wifi/aidl/vts/functional/wifi_nan_iface_aidl_test.cpp b/wifi/aidl/vts/functional/wifi_nan_iface_aidl_test.cpp
index 924d74d..6a94437 100644
--- a/wifi/aidl/vts/functional/wifi_nan_iface_aidl_test.cpp
+++ b/wifi/aidl/vts/functional/wifi_nan_iface_aidl_test.cpp
@@ -520,14 +520,6 @@
 };
 
 /*
- * GetName
- */
-TEST_P(WifiNanIfaceAidlTest, GetName) {
-    std::string ifaceName;
-    EXPECT_TRUE(wifi_nan_iface_->getName(&ifaceName).isOk());
-}
-
-/*
  * FailOnIfaceInvalid
  * Ensure that API calls to an interface fail with code ERROR_WIFI_IFACE_INVALID
  * after wifi is disabled.
diff --git a/wifi/aidl/vts/functional/wifi_sta_iface_aidl_test.cpp b/wifi/aidl/vts/functional/wifi_sta_iface_aidl_test.cpp
index f997c43..4f25171 100644
--- a/wifi/aidl/vts/functional/wifi_sta_iface_aidl_test.cpp
+++ b/wifi/aidl/vts/functional/wifi_sta_iface_aidl_test.cpp
@@ -531,14 +531,6 @@
 }
 
 /*
- * GetName
- */
-TEST_P(WifiStaIfaceAidlTest, GetName) {
-    std::string ifaceName;
-    EXPECT_TRUE(wifi_sta_iface_->getName(&ifaceName).isOk());
-}
-
-/*
  * SetDtimMultiplier
  */
 TEST_P(WifiStaIfaceAidlTest, SetDtimMultiplier) {
diff --git a/wifi/supplicant/aidl/vts/functional/Android.bp b/wifi/supplicant/aidl/vts/functional/Android.bp
index 95ff6cd..6213536 100644
--- a/wifi/supplicant/aidl/vts/functional/Android.bp
+++ b/wifi/supplicant/aidl/vts/functional/Android.bp
@@ -24,13 +24,12 @@
     default_applicable_licenses: ["hardware_interfaces_license"],
 }
 
-cc_test {
-    name: "VtsHalWifiSupplicantStaIfaceTargetTest",
+cc_defaults {
+    name: "supplicant_vts_test_defaults",
     defaults: [
         "VtsHalTargetTestDefaults",
         "use_libaidlvintf_gtest_helper_static",
     ],
-    srcs: ["supplicant_sta_iface_aidl_test.cpp"],
     shared_libs: [
         "libbinder",
         "libbinder_ndk",
@@ -63,115 +62,31 @@
 }
 
 cc_test {
+    name: "VtsHalWifiSupplicantStaIfaceTargetTest",
+    defaults: ["supplicant_vts_test_defaults"],
+    srcs: ["supplicant_sta_iface_aidl_test.cpp"],
+}
+
+cc_test {
     name: "VtsHalWifiSupplicantStaNetworkTargetTest",
-    defaults: [
-        "VtsHalTargetTestDefaults",
-        "use_libaidlvintf_gtest_helper_static",
-    ],
+    defaults: ["supplicant_vts_test_defaults"],
     srcs: ["supplicant_sta_network_aidl_test.cpp"],
-    shared_libs: [
-        "libbinder",
-        "libbinder_ndk",
-        "libvndksupport",
-    ],
-    static_libs: [
-        "android.hardware.wifi@1.0",
-        "android.hardware.wifi@1.1",
-        "android.hardware.wifi@1.2",
-        "android.hardware.wifi@1.3",
-        "android.hardware.wifi@1.4",
-        "android.hardware.wifi@1.5",
-        "android.hardware.wifi.common-V2-ndk",
-        "android.hardware.wifi.supplicant@1.0",
-        "android.hardware.wifi.supplicant@1.1",
-        "android.hardware.wifi.supplicant-V4-ndk",
-        "libwifi-system",
-        "libwifi-system-iface",
-        "VtsHalWifiV1_0TargetTestUtil",
-        "VtsHalWifiV1_5TargetTestUtil",
-        "VtsHalWifiSupplicantV1_0TargetTestUtil",
-        "android.hardware.wifi.common-V2-ndk",
-        "android.hardware.wifi-V3-ndk",
-        "VtsHalWifiTargetTestUtil",
-    ],
-    test_suites: [
-        "general-tests",
-        "vts",
-    ],
 }
 
 cc_test {
     name: "VtsHalWifiSupplicantP2pIfaceTargetTest",
-    defaults: [
-        "VtsHalTargetTestDefaults",
-        "use_libaidlvintf_gtest_helper_static",
-    ],
+    defaults: ["supplicant_vts_test_defaults"],
     srcs: ["supplicant_p2p_iface_aidl_test.cpp"],
-    shared_libs: [
-        "libbinder",
-        "libbinder_ndk",
-        "libvndksupport",
-    ],
-    static_libs: [
-        "android.hardware.wifi@1.0",
-        "android.hardware.wifi@1.1",
-        "android.hardware.wifi@1.2",
-        "android.hardware.wifi@1.3",
-        "android.hardware.wifi@1.4",
-        "android.hardware.wifi@1.5",
-        "android.hardware.wifi.common-V2-ndk",
-        "android.hardware.wifi.supplicant@1.0",
-        "android.hardware.wifi.supplicant@1.1",
-        "android.hardware.wifi.supplicant-V4-ndk",
-        "libwifi-system",
-        "libwifi-system-iface",
-        "VtsHalWifiV1_0TargetTestUtil",
-        "VtsHalWifiV1_5TargetTestUtil",
-        "VtsHalWifiSupplicantV1_0TargetTestUtil",
-        "android.hardware.wifi.common-V2-ndk",
-        "android.hardware.wifi-V3-ndk",
-        "VtsHalWifiTargetTestUtil",
-    ],
-    test_suites: [
-        "general-tests",
-        "vts",
-    ],
 }
 
 cc_test {
     name: "VtsHalWifiSupplicantP2pNetworkTargetTest",
-    defaults: [
-        "VtsHalTargetTestDefaults",
-        "use_libaidlvintf_gtest_helper_static",
-    ],
+    defaults: ["supplicant_vts_test_defaults"],
     srcs: ["supplicant_p2p_network_aidl_test.cpp"],
-    shared_libs: [
-        "libbinder",
-        "libbinder_ndk",
-        "libvndksupport",
-    ],
-    static_libs: [
-        "android.hardware.wifi@1.0",
-        "android.hardware.wifi@1.1",
-        "android.hardware.wifi@1.2",
-        "android.hardware.wifi@1.3",
-        "android.hardware.wifi@1.4",
-        "android.hardware.wifi@1.5",
-        "android.hardware.wifi.common-V2-ndk",
-        "android.hardware.wifi.supplicant@1.0",
-        "android.hardware.wifi.supplicant@1.1",
-        "android.hardware.wifi.supplicant-V4-ndk",
-        "libwifi-system",
-        "libwifi-system-iface",
-        "VtsHalWifiV1_0TargetTestUtil",
-        "VtsHalWifiV1_5TargetTestUtil",
-        "VtsHalWifiSupplicantV1_0TargetTestUtil",
-        "android.hardware.wifi.common-V2-ndk",
-        "android.hardware.wifi-V3-ndk",
-        "VtsHalWifiTargetTestUtil",
-    ],
-    test_suites: [
-        "general-tests",
-        "vts",
-    ],
+}
+
+cc_test {
+    name: "VtsHalWifiSupplicantTargetTest",
+    defaults: ["supplicant_vts_test_defaults"],
+    srcs: ["supplicant_aidl_test.cpp"],
 }
diff --git a/wifi/supplicant/aidl/vts/functional/supplicant_aidl_test.cpp b/wifi/supplicant/aidl/vts/functional/supplicant_aidl_test.cpp
new file mode 100644
index 0000000..ba2aa06
--- /dev/null
+++ b/wifi/supplicant/aidl/vts/functional/supplicant_aidl_test.cpp
@@ -0,0 +1,108 @@
+/*
+ * Copyright (C) 2025 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <VtsCoreUtil.h>
+#include <aidl/Gtest.h>
+#include <aidl/Vintf.h>
+#include <aidl/android/hardware/wifi/supplicant/BnSupplicant.h>
+#include <android/binder_manager.h>
+#include <android/binder_status.h>
+#include <binder/IServiceManager.h>
+#include <binder/ProcessState.h>
+#include <cutils/properties.h>
+
+#include "supplicant_test_utils.h"
+#include "wifi_aidl_test_utils.h"
+
+using aidl::android::hardware::wifi::supplicant::DebugLevel;
+using aidl::android::hardware::wifi::supplicant::IfaceInfo;
+using aidl::android::hardware::wifi::supplicant::IfaceType;
+using android::ProcessState;
+
+class SupplicantAidlTest : public testing::TestWithParam<std::string> {
+  public:
+    void SetUp() override {
+        initializeService();
+        supplicant_ = getSupplicant(GetParam().c_str());
+        ASSERT_NE(supplicant_, nullptr);
+        ASSERT_TRUE(supplicant_->setDebugParams(DebugLevel::EXCESSIVE, true, true).isOk());
+    }
+
+    void TearDown() override {
+        stopSupplicantService();
+        startWifiFramework();
+    }
+
+  protected:
+    std::shared_ptr<ISupplicant> supplicant_;
+};
+
+/*
+ * GetDebugLevel
+ */
+TEST_P(SupplicantAidlTest, GetDebugLevel) {
+    DebugLevel retrievedLevel;
+    DebugLevel expectedLevel = DebugLevel::WARNING;
+    ASSERT_TRUE(supplicant_->setDebugParams(expectedLevel, true, true).isOk());
+    ASSERT_TRUE(supplicant_->getDebugLevel(&retrievedLevel).isOk());
+    ASSERT_EQ(retrievedLevel, expectedLevel);
+}
+
+/*
+ * ListAndRemoveInterface
+ */
+TEST_P(SupplicantAidlTest, ListAndRemoveInterface) {
+    // Ensure that the STA interface exists
+    std::shared_ptr<ISupplicantStaIface> sta_iface;
+    EXPECT_TRUE(supplicant_->getStaInterface(getStaIfaceName(), &sta_iface).isOk());
+    ASSERT_NE(sta_iface, nullptr);
+
+    // Interface list should contain at least 1 interface
+    std::vector<IfaceInfo> ifaces;
+    EXPECT_TRUE(supplicant_->listInterfaces(&ifaces).isOk());
+    ASSERT_FALSE(ifaces.empty());
+    int prevNumIfaces = ifaces.size();
+
+    // Remove an interface and verify that it is removed from the list
+    EXPECT_TRUE(supplicant_->removeInterface(ifaces[0]).isOk());
+    EXPECT_TRUE(supplicant_->listInterfaces(&ifaces).isOk());
+    ASSERT_NE(ifaces.size(), prevNumIfaces);
+}
+
+/*
+ * SetConcurrencyPriority
+ */
+TEST_P(SupplicantAidlTest, SetConcurrencyPriority) {
+    // Valid values
+    ASSERT_TRUE(supplicant_->setConcurrencyPriority(IfaceType::STA).isOk());
+    ASSERT_TRUE(supplicant_->setConcurrencyPriority(IfaceType::P2P).isOk());
+
+    // Invalid value
+    ASSERT_FALSE(supplicant_->setConcurrencyPriority(static_cast<IfaceType>(2)).isOk());
+}
+
+GTEST_ALLOW_UNINSTANTIATED_PARAMETERIZED_TEST(SupplicantAidlTest);
+INSTANTIATE_TEST_SUITE_P(
+        Supplicant, SupplicantAidlTest,
+        testing::ValuesIn(android::getAidlHalInstanceNames(ISupplicant::descriptor)),
+        android::PrintInstanceNameToString);
+
+int main(int argc, char** argv) {
+    ::testing::InitGoogleTest(&argc, argv);
+    ProcessState::self()->setThreadPoolMaxThreadCount(1);
+    ProcessState::self()->startThreadPool();
+    return RUN_ALL_TESTS();
+}
diff --git a/wifi/supplicant/aidl/vts/functional/supplicant_p2p_network_aidl_test.cpp b/wifi/supplicant/aidl/vts/functional/supplicant_p2p_network_aidl_test.cpp
index 165a01a..3ebdc8e 100644
--- a/wifi/supplicant/aidl/vts/functional/supplicant_p2p_network_aidl_test.cpp
+++ b/wifi/supplicant/aidl/vts/functional/supplicant_p2p_network_aidl_test.cpp
@@ -63,7 +63,9 @@
     }
 
     void TearDown() override {
-        EXPECT_TRUE(p2p_iface_->removeNetwork(network_id_).isOk());
+        if (p2p_iface_ != nullptr) {
+            EXPECT_TRUE(p2p_iface_->removeNetwork(network_id_).isOk());
+        }
         stopSupplicantService();
         startWifiFramework();
     }