diff --git a/audio/aidl/Android.bp b/audio/aidl/Android.bp
index 0ab990a..89d186c 100644
--- a/audio/aidl/Android.bp
+++ b/audio/aidl/Android.bp
@@ -297,6 +297,7 @@
         "android/hardware/audio/effect/PresetReverb.aidl",
         "android/hardware/audio/effect/Processing.aidl",
         "android/hardware/audio/effect/Range.aidl",
+        "android/hardware/audio/effect/Spatializer.aidl",
         "android/hardware/audio/effect/State.aidl",
         "android/hardware/audio/effect/VendorExtension.aidl",
         "android/hardware/audio/effect/Virtualizer.aidl",
diff --git a/audio/aidl/aidl_api/android.hardware.audio.effect/current/android/hardware/audio/effect/Flags.aidl b/audio/aidl/aidl_api/android.hardware.audio.effect/current/android/hardware/audio/effect/Flags.aidl
index bcbf870..046c220 100644
--- a/audio/aidl/aidl_api/android.hardware.audio.effect/current/android/hardware/audio/effect/Flags.aidl
+++ b/audio/aidl/aidl_api/android.hardware.audio.effect/current/android/hardware/audio/effect/Flags.aidl
@@ -43,6 +43,8 @@
   boolean audioModeIndication;
   boolean audioSourceIndication;
   boolean bypass;
+  boolean sinkMetadataIndication;
+  boolean sourceMetadataIndication;
   @Backing(type="byte") @VintfStability
   enum Type {
     INSERT = 0,
diff --git a/audio/aidl/aidl_api/android.hardware.audio.effect/current/android/hardware/audio/effect/Parameter.aidl b/audio/aidl/aidl_api/android.hardware.audio.effect/current/android/hardware/audio/effect/Parameter.aidl
index 0422bd9..ff33c42 100644
--- a/audio/aidl/aidl_api/android.hardware.audio.effect/current/android/hardware/audio/effect/Parameter.aidl
+++ b/audio/aidl/aidl_api/android.hardware.audio.effect/current/android/hardware/audio/effect/Parameter.aidl
@@ -41,6 +41,8 @@
   boolean offload;
   android.hardware.audio.effect.Parameter.VolumeStereo volumeStereo;
   android.hardware.audio.effect.Parameter.Specific specific;
+  android.hardware.audio.common.SinkMetadata sinkMetadata;
+  android.hardware.audio.common.SourceMetadata sourceMetadata;
   @VintfStability
   union Id {
     android.hardware.audio.effect.VendorExtension vendorEffectTag;
@@ -60,6 +62,7 @@
     android.hardware.audio.effect.Visualizer.Id visualizerTag;
     android.hardware.audio.effect.Volume.Id volumeTag;
     android.hardware.audio.effect.Parameter.Tag commonTag;
+    android.hardware.audio.effect.Spatializer.Id spatializerTag;
   }
   @VintfStability
   parcelable Common {
@@ -91,5 +94,6 @@
     android.hardware.audio.effect.Virtualizer virtualizer;
     android.hardware.audio.effect.Visualizer visualizer;
     android.hardware.audio.effect.Volume volume;
+    android.hardware.audio.effect.Spatializer spatializer;
   }
 }
diff --git a/audio/aidl/aidl_api/android.hardware.audio.effect/current/android/hardware/audio/effect/Range.aidl b/audio/aidl/aidl_api/android.hardware.audio.effect/current/android/hardware/audio/effect/Range.aidl
index 93edc5e..40ee6b5 100644
--- a/audio/aidl/aidl_api/android.hardware.audio.effect/current/android/hardware/audio/effect/Range.aidl
+++ b/audio/aidl/aidl_api/android.hardware.audio.effect/current/android/hardware/audio/effect/Range.aidl
@@ -50,6 +50,7 @@
   android.hardware.audio.effect.Range.VirtualizerRange[] virtualizer;
   android.hardware.audio.effect.Range.VisualizerRange[] visualizer;
   android.hardware.audio.effect.Range.VolumeRange[] volume;
+  android.hardware.audio.effect.Range.SpatializerRange[] spatializer;
   @VintfStability
   parcelable AcousticEchoCancelerRange {
     android.hardware.audio.effect.AcousticEchoCanceler min;
@@ -111,6 +112,11 @@
     android.hardware.audio.effect.PresetReverb max;
   }
   @VintfStability
+  parcelable SpatializerRange {
+    android.hardware.audio.effect.Spatializer min;
+    android.hardware.audio.effect.Spatializer max;
+  }
+  @VintfStability
   parcelable VendorExtensionRange {
     android.hardware.audio.effect.VendorExtension min;
     android.hardware.audio.effect.VendorExtension max;
diff --git a/audio/aidl/aidl_api/android.hardware.audio.effect/current/android/hardware/audio/effect/Spatializer.aidl b/audio/aidl/aidl_api/android.hardware.audio.effect/current/android/hardware/audio/effect/Spatializer.aidl
new file mode 100644
index 0000000..98ecee0
--- /dev/null
+++ b/audio/aidl/aidl_api/android.hardware.audio.effect/current/android/hardware/audio/effect/Spatializer.aidl
@@ -0,0 +1,50 @@
+/*
+ * Copyright (C) 2023 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.audio.effect;
+@VintfStability
+union Spatializer {
+  android.hardware.audio.effect.VendorExtension vendor;
+  android.media.audio.common.AudioChannelLayout[] supportedChannelLayout;
+  android.media.audio.common.Spatialization.Level spatializationLevel;
+  android.media.audio.common.Spatialization.Mode spatializationMode;
+  int headTrackingSensorId;
+  android.media.audio.common.HeadTracking.Mode headTrackingMode;
+  android.media.audio.common.HeadTracking.ConnectionMode headTrackingConnectionMode;
+  android.media.audio.common.HeadTracking.SensorData headTrackingSensorData;
+  @VintfStability
+  union Id {
+    android.hardware.audio.effect.VendorExtension vendorExtensionTag;
+    android.hardware.audio.effect.Spatializer.Tag commonTag;
+  }
+}
diff --git a/audio/aidl/android/hardware/audio/effect/Flags.aidl b/audio/aidl/android/hardware/audio/effect/Flags.aidl
index 28685c3..70668a3 100644
--- a/audio/aidl/android/hardware/audio/effect/Flags.aidl
+++ b/audio/aidl/android/hardware/audio/effect/Flags.aidl
@@ -144,4 +144,18 @@
      * Set to true if the effect instance bypass audio data (no processing).
      */
     boolean bypass;
+
+    /**
+     * Effect instance sets this flag to true if it requires record AudioTrack metadata update. In
+     * this case the framework must call IEffect.setParameter to notify effect instance when there
+     * is a change in sinkMetadata.
+     */
+    boolean sinkMetadataIndication;
+
+    /**
+     * Effect instance sets this flag to true if it requires playback AudioTrack metadata update. In
+     * this case the framework must call IEffect.setParameter to notify effect instance when there
+     * is a change in sourceMetadata.
+     */
+    boolean sourceMetadataIndication;
 }
diff --git a/audio/aidl/android/hardware/audio/effect/Parameter.aidl b/audio/aidl/android/hardware/audio/effect/Parameter.aidl
index 0954055..6fd9161 100644
--- a/audio/aidl/android/hardware/audio/effect/Parameter.aidl
+++ b/audio/aidl/android/hardware/audio/effect/Parameter.aidl
@@ -16,6 +16,8 @@
 
 package android.hardware.audio.effect;
 
+import android.hardware.audio.common.SinkMetadata;
+import android.hardware.audio.common.SourceMetadata;
 import android.hardware.audio.effect.AcousticEchoCanceler;
 import android.hardware.audio.effect.AutomaticGainControlV1;
 import android.hardware.audio.effect.AutomaticGainControlV2;
@@ -28,6 +30,7 @@
 import android.hardware.audio.effect.LoudnessEnhancer;
 import android.hardware.audio.effect.NoiseSuppression;
 import android.hardware.audio.effect.PresetReverb;
+import android.hardware.audio.effect.Spatializer;
 import android.hardware.audio.effect.VendorExtension;
 import android.hardware.audio.effect.Virtualizer;
 import android.hardware.audio.effect.Visualizer;
@@ -103,6 +106,11 @@
          * directly.
          */
         Parameter.Tag commonTag;
+
+        /**
+         * Parameter tag defined for Spatializer parameters.
+         */
+        Spatializer.Id spatializerTag;
     }
 
     /**
@@ -189,6 +197,23 @@
         Virtualizer virtualizer;
         Visualizer visualizer;
         Volume volume;
+        Spatializer spatializer;
     }
     Specific specific;
+
+    /**
+     * SinkMetadata defines the metadata of record AudioTracks which the effect instance associate
+     * with.
+     * The effect engine is required to set Flags.sinkMetadataIndication to true if it wants to
+     * receive sinkMetadata update from the audio framework.
+     */
+    SinkMetadata sinkMetadata;
+
+    /**
+     * SourceMetadata defines the metadata of playback AudioTracks which the effect instance
+     * associate with.
+     * The effect engine is required to set Flags.sourceMetadataIndication to true if it wants to
+     * receive sourceMetadata update from the audio framework.
+     */
+    SourceMetadata sourceMetadata;
 }
diff --git a/audio/aidl/android/hardware/audio/effect/Range.aidl b/audio/aidl/android/hardware/audio/effect/Range.aidl
index 567320a..e5acb68 100644
--- a/audio/aidl/android/hardware/audio/effect/Range.aidl
+++ b/audio/aidl/android/hardware/audio/effect/Range.aidl
@@ -28,6 +28,7 @@
 import android.hardware.audio.effect.LoudnessEnhancer;
 import android.hardware.audio.effect.NoiseSuppression;
 import android.hardware.audio.effect.PresetReverb;
+import android.hardware.audio.effect.Spatializer;
 import android.hardware.audio.effect.VendorExtension;
 import android.hardware.audio.effect.Virtualizer;
 import android.hardware.audio.effect.Visualizer;
@@ -169,6 +170,12 @@
     }
 
     @VintfStability
+    parcelable SpatializerRange {
+        Spatializer min;
+        Spatializer max;
+    }
+
+    @VintfStability
     parcelable VendorExtensionRange {
         VendorExtension min;
         VendorExtension max;
@@ -217,4 +224,5 @@
     VirtualizerRange[] virtualizer;
     VisualizerRange[] visualizer;
     VolumeRange[] volume;
+    SpatializerRange[] spatializer;
 }
diff --git a/audio/aidl/android/hardware/audio/effect/Spatializer.aidl b/audio/aidl/android/hardware/audio/effect/Spatializer.aidl
new file mode 100644
index 0000000..6ebe0d5
--- /dev/null
+++ b/audio/aidl/android/hardware/audio/effect/Spatializer.aidl
@@ -0,0 +1,88 @@
+/*
+ * Copyright (C) 2023 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio.effect;
+
+import android.hardware.audio.effect.VendorExtension;
+import android.media.audio.common.AudioChannelLayout;
+import android.media.audio.common.HeadTracking;
+import android.media.audio.common.Spatialization;
+
+/**
+ * Union representing parameters for audio spatialization effects.
+ *
+ * Sound spatialization simulates sounds around the listener as if they were emanating from virtual
+ * positions based on the original recording.
+ * For more details, refer to the documentation:
+ * https://developer.android.com/reference/android/media/Spatializer.
+ *
+ * android.hardware.audio.effect.Spatializer specifies parameters for the implementation of audio
+ * spatialization effects.
+ *
+ * A Spatializer implementation must report its supported parameter ranges using Capability.Range.
+ * spatializer.
+ */
+@VintfStability
+union Spatializer {
+    /**
+     * Parameter tag to identify the parameters for getParameter().
+     */
+    @VintfStability
+    union Id {
+        VendorExtension vendorExtensionTag;
+        Spatializer.Tag commonTag;
+    }
+
+    /**
+     * Vendor extension implementation for additional parameters.
+     */
+    VendorExtension vendor;
+
+    /**
+     * List of supported input channel layouts.
+     */
+    AudioChannelLayout[] supportedChannelLayout;
+
+    /**
+     * Level of spatialization.
+     */
+    Spatialization.Level spatializationLevel;
+
+    /**
+     * Spatialization mode, Binaural or Transaural for example.
+     */
+    Spatialization.Mode spatializationMode;
+
+    /**
+     * Head tracking sensor ID.
+     */
+    int headTrackingSensorId;
+
+    /**
+     * Head tracking mode for spatialization.
+     */
+    HeadTracking.Mode headTrackingMode;
+
+    /**
+     * Head tracking sensor connection mode for spatialization.
+     */
+    HeadTracking.ConnectionMode headTrackingConnectionMode;
+
+    /**
+     * Headtracking sensor data.
+     */
+    HeadTracking.SensorData headTrackingSensorData;
+}
diff --git a/audio/aidl/common/include/Utils.h b/audio/aidl/common/include/Utils.h
index 59ca92a..ef312d5 100644
--- a/audio/aidl/common/include/Utils.h
+++ b/audio/aidl/common/include/Utils.h
@@ -175,7 +175,7 @@
 }
 
 constexpr int32_t frameCountFromDurationUs(long durationUs, int32_t sampleRateHz) {
-    return (durationUs * sampleRateHz) / 1000000LL;
+    return (static_cast<long long>(durationUs) * sampleRateHz) / 1000000LL;
 }
 
 constexpr int32_t frameCountFromDurationMs(int32_t durationMs, int32_t sampleRateHz) {
diff --git a/audio/aidl/default/Android.bp b/audio/aidl/default/Android.bp
index 7b96293..949b654 100644
--- a/audio/aidl/default/Android.bp
+++ b/audio/aidl/default/Android.bp
@@ -94,6 +94,7 @@
         "audio_policy_engine_configuration_aidl_default",
     ],
     shared_libs: [
+        "android.hardware.bluetooth.audio-impl",
         "libaudio_aidl_conversion_common_ndk",
         "libbluetooth_audio_session_aidl",
         "libmedia_helper",
@@ -127,6 +128,7 @@
         "libaudioserviceexampleimpl",
     ],
     shared_libs: [
+        "android.hardware.bluetooth.audio-impl",
         "libaudio_aidl_conversion_common_ndk",
         "libbluetooth_audio_session_aidl",
         "libmedia_helper",
diff --git a/audio/aidl/default/Configuration.cpp b/audio/aidl/default/Configuration.cpp
index d09552b..254eb46 100644
--- a/audio/aidl/default/Configuration.cpp
+++ b/audio/aidl/default/Configuration.cpp
@@ -302,8 +302,9 @@
 //   2. The canonical r_submix configuration only lists 'STEREO' and '48000',
 //      however the framework attempts to open streams for other sample rates
 //      as well. The legacy r_submix implementation allowed that, but libaudiohal@aidl
-//      will not find a mix port to use. Because of that, list all channel
-//      masks and sample rates that the legacy implementation allowed.
+//      will not find a mix port to use. Because of that, list all sample rates that
+//      the legacy implementation allowed (note that mono was not allowed, the framework
+//      is expected to upmix mono tracks into stereo if needed).
 //   3. The legacy implementation had a hard limit on the number of routes (10),
 //      and this is checked indirectly by AudioPlaybackCaptureTest#testPlaybackCaptureDoS
 //      CTS test. Instead of hardcoding the number of routes, we can use
@@ -331,9 +332,8 @@
 std::unique_ptr<Configuration> getRSubmixConfiguration() {
     static const Configuration configuration = []() {
         Configuration c;
-        const std::vector<AudioProfile> standardPcmAudioProfiles{
-                createProfile(PcmType::INT_16_BIT,
-                              {AudioChannelLayout::LAYOUT_MONO, AudioChannelLayout::LAYOUT_STEREO},
+        const std::vector<AudioProfile> remoteSubmixPcmAudioProfiles{
+                createProfile(PcmType::INT_16_BIT, {AudioChannelLayout::LAYOUT_STEREO},
                               {8000, 11025, 16000, 32000, 44100, 48000})};
 
         // Device ports
@@ -343,25 +343,25 @@
                            createDeviceExt(AudioDeviceType::OUT_SUBMIX, 0,
                                            AudioDeviceDescription::CONNECTION_VIRTUAL));
         c.ports.push_back(rsubmixOutDevice);
-        c.connectedProfiles[rsubmixOutDevice.id] = standardPcmAudioProfiles;
+        c.connectedProfiles[rsubmixOutDevice.id] = remoteSubmixPcmAudioProfiles;
 
         AudioPort rsubmixInDevice =
                 createPort(c.nextPortId++, "Remote Submix In", 0, true,
                            createDeviceExt(AudioDeviceType::IN_SUBMIX, 0,
                                            AudioDeviceDescription::CONNECTION_VIRTUAL));
         c.ports.push_back(rsubmixInDevice);
-        c.connectedProfiles[rsubmixInDevice.id] = standardPcmAudioProfiles;
+        c.connectedProfiles[rsubmixInDevice.id] = remoteSubmixPcmAudioProfiles;
 
         // Mix ports
 
         AudioPort rsubmixOutMix =
                 createPort(c.nextPortId++, "r_submix output", 0, false, createPortMixExt(20, 10));
-        rsubmixOutMix.profiles = standardPcmAudioProfiles;
+        rsubmixOutMix.profiles = remoteSubmixPcmAudioProfiles;
         c.ports.push_back(rsubmixOutMix);
 
         AudioPort rsubmixInMix =
                 createPort(c.nextPortId++, "r_submix input", 0, true, createPortMixExt(20, 10));
-        rsubmixInMix.profiles = standardPcmAudioProfiles;
+        rsubmixInMix.profiles = remoteSubmixPcmAudioProfiles;
         c.ports.push_back(rsubmixInMix);
 
         c.routes.push_back(createRoute({rsubmixOutMix}, rsubmixOutDevice));
diff --git a/audio/aidl/default/XsdcConversion.cpp b/audio/aidl/default/XsdcConversion.cpp
index 9e30347..1720949 100644
--- a/audio/aidl/default/XsdcConversion.cpp
+++ b/audio/aidl/default/XsdcConversion.cpp
@@ -205,24 +205,28 @@
 ConversionResult<AudioIoFlags> convertIoFlagsToAidl(
         const std::vector<ap_xsd::AudioInOutFlag>& flags, const ap_xsd::Role role,
         bool flagsForMixPort) {
-    int flagMask = 0;
+    int legacyFlagMask = 0;
     if ((role == ap_xsd::Role::sink && flagsForMixPort) ||
         (role == ap_xsd::Role::source && !flagsForMixPort)) {
         for (const ap_xsd::AudioInOutFlag& flag : flags) {
             audio_input_flags_t legacyFlag;
             if (::android::InputFlagConverter::fromString(ap_xsd::toString(flag), legacyFlag)) {
-                flagMask |= static_cast<int>(legacyFlag);
+                legacyFlagMask |= static_cast<int>(legacyFlag);
             }
         }
-        return AudioIoFlags::make<AudioIoFlags::Tag::input>(flagMask);
+        return AudioIoFlags::make<AudioIoFlags::Tag::input>(
+                VALUE_OR_FATAL(legacy2aidl_audio_input_flags_t_int32_t_mask(
+                        static_cast<audio_input_flags_t>(legacyFlagMask))));
     } else {
         for (const ap_xsd::AudioInOutFlag& flag : flags) {
             audio_output_flags_t legacyFlag;
             if (::android::OutputFlagConverter::fromString(ap_xsd::toString(flag), legacyFlag)) {
-                flagMask |= static_cast<int>(legacyFlag);
+                legacyFlagMask |= static_cast<int>(legacyFlag);
             }
         }
-        return AudioIoFlags::make<AudioIoFlags::Tag::output>(flagMask);
+        return AudioIoFlags::make<AudioIoFlags::Tag::output>(
+                VALUE_OR_FATAL(legacy2aidl_audio_output_flags_t_int32_t_mask(
+                        static_cast<audio_output_flags_t>(legacyFlagMask))));
     }
 }
 
diff --git a/audio/aidl/default/acousticEchoCanceler/AcousticEchoCancelerSw.cpp b/audio/aidl/default/acousticEchoCanceler/AcousticEchoCancelerSw.cpp
index 8727232..5e18f1b 100644
--- a/audio/aidl/default/acousticEchoCanceler/AcousticEchoCancelerSw.cpp
+++ b/audio/aidl/default/acousticEchoCanceler/AcousticEchoCancelerSw.cpp
@@ -76,7 +76,7 @@
                           .proxy = std::nullopt},
                    .flags = {.type = Flags::Type::PRE_PROC,
                              .insert = Flags::Insert::FIRST,
-                             .volume = Flags::Volume::CTRL},
+                             .volume = Flags::Volume::NONE},
                    .name = AcousticEchoCancelerSw::kEffectName,
                    .implementor = "The Android Open Source Project"},
         .capability = AcousticEchoCancelerSw::kCapability};
diff --git a/audio/aidl/default/bluetooth/ModuleBluetooth.cpp b/audio/aidl/default/bluetooth/ModuleBluetooth.cpp
index 502b153..8a1cbbf 100644
--- a/audio/aidl/default/bluetooth/ModuleBluetooth.cpp
+++ b/audio/aidl/default/bluetooth/ModuleBluetooth.cpp
@@ -33,8 +33,23 @@
 using android::bluetooth::audio::aidl::BluetoothAudioPortAidl;
 using android::bluetooth::audio::aidl::BluetoothAudioPortAidlOut;
 
+// TODO(b/312265159) bluetooth audio should be in its own process
+// Remove this and the shared_libs when that happens
+extern "C" binder_status_t createIBluetoothAudioProviderFactory();
+
 namespace aidl::android::hardware::audio::core {
 
+ModuleBluetooth::ModuleBluetooth(std::unique_ptr<Module::Configuration>&& config)
+    : Module(Type::BLUETOOTH, std::move(config)) {
+    // TODO(b/312265159) bluetooth audio should be in its own process
+    // Remove this and the shared_libs when that happens
+    binder_status_t status = createIBluetoothAudioProviderFactory();
+    if (status != STATUS_OK) {
+        LOG(ERROR) << "Failed to create bluetooth audio provider factory. Status: "
+                   << ::android::statusToString(status);
+    }
+}
+
 ndk::ScopedAStatus ModuleBluetooth::getBluetoothA2dp(
         std::shared_ptr<IBluetoothA2dp>* _aidl_return) {
     *_aidl_return = getBtA2dp().getInstance();
diff --git a/audio/aidl/default/include/core-impl/ModuleBluetooth.h b/audio/aidl/default/include/core-impl/ModuleBluetooth.h
index a58798b..631b088 100644
--- a/audio/aidl/default/include/core-impl/ModuleBluetooth.h
+++ b/audio/aidl/default/include/core-impl/ModuleBluetooth.h
@@ -28,8 +28,7 @@
                        std::weak_ptr<IBluetoothLe>>
             BtProfileHandles;
 
-    ModuleBluetooth(std::unique_ptr<Configuration>&& config)
-        : Module(Type::BLUETOOTH, std::move(config)) {}
+    ModuleBluetooth(std::unique_ptr<Configuration>&& config);
 
   private:
     ChildInterface<BluetoothA2dp>& getBtA2dp();
diff --git a/audio/aidl/default/include/core-impl/StreamPrimary.h b/audio/aidl/default/include/core-impl/StreamPrimary.h
index abc119c..145c3c4 100644
--- a/audio/aidl/default/include/core-impl/StreamPrimary.h
+++ b/audio/aidl/default/include/core-impl/StreamPrimary.h
@@ -27,13 +27,18 @@
   public:
     StreamPrimary(StreamContext* context, const Metadata& metadata);
 
+    ::android::status_t start() override;
     ::android::status_t transfer(void* buffer, size_t frameCount, size_t* actualFrameCount,
                                  int32_t* latencyMs) override;
+    ::android::status_t refinePosition(StreamDescriptor::Position* position) override;
 
   protected:
     std::vector<alsa::DeviceProfile> getDeviceProfiles() override;
 
     const bool mIsAsynchronous;
+    long mStartTimeNs = 0;
+    long mFramesSinceStart = 0;
+    bool mSkipNextTransfer = false;
 };
 
 class StreamInPrimary final : public StreamIn, public StreamSwitcher, public StreamInHwGainHelper {
diff --git a/audio/aidl/default/noiseSuppression/NoiseSuppressionSw.cpp b/audio/aidl/default/noiseSuppression/NoiseSuppressionSw.cpp
index 99f2caf..a3208df 100644
--- a/audio/aidl/default/noiseSuppression/NoiseSuppressionSw.cpp
+++ b/audio/aidl/default/noiseSuppression/NoiseSuppressionSw.cpp
@@ -67,7 +67,7 @@
                           .proxy = std::nullopt},
                    .flags = {.type = Flags::Type::PRE_PROC,
                              .insert = Flags::Insert::FIRST,
-                             .volume = Flags::Volume::CTRL},
+                             .volume = Flags::Volume::NONE},
                    .name = NoiseSuppressionSw::kEffectName,
                    .implementor = "The Android Open Source Project"}};
 
diff --git a/audio/aidl/default/primary/StreamPrimary.cpp b/audio/aidl/default/primary/StreamPrimary.cpp
index 7e3bdd4..b22ef32 100644
--- a/audio/aidl/default/primary/StreamPrimary.cpp
+++ b/audio/aidl/default/primary/StreamPrimary.cpp
@@ -14,12 +14,11 @@
  * limitations under the License.
  */
 
-#include <chrono>
-
 #define LOG_TAG "AHAL_StreamPrimary"
 #include <android-base/logging.h>
 #include <android-base/properties.h>
 #include <audio_utils/clock.h>
+#include <error/Result.h>
 #include <error/expected_utils.h>
 
 #include "PrimaryMixer.h"
@@ -43,26 +42,52 @@
     context->startStreamDataProcessor();
 }
 
+::android::status_t StreamPrimary::start() {
+    RETURN_STATUS_IF_ERROR(StreamAlsa::start());
+    mStartTimeNs = ::android::uptimeNanos();
+    mFramesSinceStart = 0;
+    mSkipNextTransfer = false;
+    return ::android::OK;
+}
+
 ::android::status_t StreamPrimary::transfer(void* buffer, size_t frameCount,
                                             size_t* actualFrameCount, int32_t* latencyMs) {
-    auto start = std::chrono::steady_clock::now();
-    if (auto status = StreamAlsa::transfer(buffer, frameCount, actualFrameCount, latencyMs);
-        status != ::android::OK) {
-        return status;
-    }
     // This is a workaround for the emulator implementation which has a host-side buffer
-    // and this can result in reading faster than real time.
-    if (mIsInput && !mIsAsynchronous) {
-        auto recordDurationUs = std::chrono::duration_cast<std::chrono::microseconds>(
-                std::chrono::steady_clock::now() - start);
-        const long projectedVsObservedOffsetUs =
-                *actualFrameCount * MICROS_PER_SECOND / mContext.getSampleRate() -
-                recordDurationUs.count();
-        if (projectedVsObservedOffsetUs > 0) {
-            LOG(VERBOSE) << __func__ << ": sleeping for " << projectedVsObservedOffsetUs << " us";
-            usleep(projectedVsObservedOffsetUs);
-        }
+    // and is not being able to achieve real-time behavior similar to ADSPs (b/302587331).
+    if (!mSkipNextTransfer) {
+        RETURN_STATUS_IF_ERROR(
+                StreamAlsa::transfer(buffer, frameCount, actualFrameCount, latencyMs));
+    } else {
+        LOG(DEBUG) << __func__ << ": skipping transfer (" << frameCount << " frames)";
+        *actualFrameCount = frameCount;
+        if (mIsInput) memset(buffer, 0, frameCount * mFrameSizeBytes);
+        mSkipNextTransfer = false;
     }
+    if (!mIsAsynchronous) {
+        const long bufferDurationUs =
+                (*actualFrameCount) * MICROS_PER_SECOND / mContext.getSampleRate();
+        const auto totalDurationUs =
+                (::android::uptimeNanos() - mStartTimeNs) / NANOS_PER_MICROSECOND;
+        mFramesSinceStart += *actualFrameCount;
+        const long totalOffsetUs =
+                mFramesSinceStart * MICROS_PER_SECOND / mContext.getSampleRate() - totalDurationUs;
+        LOG(VERBOSE) << __func__ << ": totalOffsetUs " << totalOffsetUs;
+        if (totalOffsetUs > 0) {
+            const long sleepTimeUs = std::min(totalOffsetUs, bufferDurationUs);
+            LOG(VERBOSE) << __func__ << ": sleeping for " << sleepTimeUs << " us";
+            usleep(sleepTimeUs);
+        } else {
+            mSkipNextTransfer = true;
+        }
+    } else {
+        LOG(VERBOSE) << __func__ << ": asynchronous transfer";
+    }
+    return ::android::OK;
+}
+
+::android::status_t StreamPrimary::refinePosition(StreamDescriptor::Position*) {
+    // Since not all data is actually sent to the HAL, use the position maintained by Stream class
+    // which accounts for all frames passed from / to the client.
     return ::android::OK;
 }
 
diff --git a/audio/aidl/default/r_submix/StreamRemoteSubmix.cpp b/audio/aidl/default/r_submix/StreamRemoteSubmix.cpp
index 38281b9..fc61dcb 100644
--- a/audio/aidl/default/r_submix/StreamRemoteSubmix.cpp
+++ b/audio/aidl/default/r_submix/StreamRemoteSubmix.cpp
@@ -131,6 +131,8 @@
             LOG(DEBUG) << __func__ << ": shutting down MonoPipe sink";
 
             sink->shutdown(true);
+            // The client already considers this stream as closed, release the output end.
+            route->closeStream(mIsInput);
         } else {
             LOG(DEBUG) << __func__ << ": stream already closed.";
             ndk::ScopedAStatus::fromExceptionCode(EX_ILLEGAL_STATE);
diff --git a/audio/aidl/default/visualizer/VisualizerSw.cpp b/audio/aidl/default/visualizer/VisualizerSw.cpp
index 0909f25..285c102 100644
--- a/audio/aidl/default/visualizer/VisualizerSw.cpp
+++ b/audio/aidl/default/visualizer/VisualizerSw.cpp
@@ -73,7 +73,7 @@
                           .proxy = std::nullopt},
                    .flags = {.type = Flags::Type::INSERT,
                              .insert = Flags::Insert::FIRST,
-                             .volume = Flags::Volume::CTRL},
+                             .volume = Flags::Volume::NONE},
                    .name = VisualizerSw::kEffectName,
                    .implementor = "The Android Open Source Project"},
         .capability = VisualizerSw::kCapability};
diff --git a/audio/aidl/vts/ModuleConfig.cpp b/audio/aidl/vts/ModuleConfig.cpp
index a633d83..2b86271 100644
--- a/audio/aidl/vts/ModuleConfig.cpp
+++ b/audio/aidl/vts/ModuleConfig.cpp
@@ -17,6 +17,9 @@
 #include <algorithm>
 #include <chrono>
 
+#define LOG_TAG "VtsHalAudio.ModuleConfig"
+#include <android-base/logging.h>
+
 #include <Utils.h>
 #include <aidl/android/media/audio/common/AudioInputFlags.h>
 #include <aidl/android/media/audio/common/AudioIoFlags.h>
diff --git a/audio/aidl/vts/VtsHalAudioEffectTargetTest.cpp b/audio/aidl/vts/VtsHalAudioEffectTargetTest.cpp
index ca1cea9..aaf9ad4 100644
--- a/audio/aidl/vts/VtsHalAudioEffectTargetTest.cpp
+++ b/audio/aidl/vts/VtsHalAudioEffectTargetTest.cpp
@@ -596,8 +596,14 @@
 
     Parameter::Id id = Parameter::Id::make<Parameter::Id::commonTag>(Parameter::volumeStereo);
     Parameter::VolumeStereo volume = {.left = 10.0, .right = 10.0};
-    ASSERT_NO_FATAL_FAILURE(
-            setAndGetParameter(id, Parameter::make<Parameter::volumeStereo>(volume)));
+    if (mDescriptor.common.flags.volume == Flags::Volume::CTRL) {
+        Parameter get;
+        EXPECT_IS_OK(mEffect->setParameter(volume));
+        EXPECT_IS_OK(mEffect->getParameter(id, &get));
+    } else {
+        ASSERT_NO_FATAL_FAILURE(
+                setAndGetParameter(id, Parameter::make<Parameter::volumeStereo>(volume)));
+    }
 
     ASSERT_NO_FATAL_FAILURE(command(mEffect, CommandId::STOP));
     ASSERT_NO_FATAL_FAILURE(expectState(mEffect, State::IDLE));
diff --git a/audio/effect/4.0/xml/Android.bp b/audio/effect/4.0/xml/Android.bp
index 8c03a35..bdffe60 100644
--- a/audio/effect/4.0/xml/Android.bp
+++ b/audio/effect/4.0/xml/Android.bp
@@ -9,9 +9,9 @@
 
 genrule {
     name: "audio_effects_conf_V4_0",
-    srcs: ["audio_effects_conf.xsd"],
+    srcs: [":audio_effects_conf_V2_0"],
     out: [
         "audio_effects_conf_V4_0.xsd",
     ],
-    cmd: "cp -f $(in) $(genDir)/audio_effects_conf_V4_0.xsd",
+    cmd: "cp -f $(in) $(out)",
 }
diff --git a/audio/effect/4.0/xml/audio_effects_conf.xsd b/audio/effect/4.0/xml/audio_effects_conf.xsd
deleted file mode 120000
index 9d85fa7..0000000
--- a/audio/effect/4.0/xml/audio_effects_conf.xsd
+++ /dev/null
@@ -1 +0,0 @@
-../../2.0/xml/audio_effects_conf.xsd
\ No newline at end of file
diff --git a/audio/effect/5.0/xml/Android.bp b/audio/effect/5.0/xml/Android.bp
index 7982e2a..ed12e38 100644
--- a/audio/effect/5.0/xml/Android.bp
+++ b/audio/effect/5.0/xml/Android.bp
@@ -9,6 +9,6 @@
 
 xsd_config {
     name: "audio_effects_conf_V5_0",
-    srcs: ["audio_effects_conf.xsd"],
+    srcs: [":audio_effects_conf_V2_0"],
     package_name: "audio.effects.V5_0",
 }
diff --git a/audio/effect/5.0/xml/audio_effects_conf.xsd b/audio/effect/5.0/xml/audio_effects_conf.xsd
deleted file mode 120000
index 9d85fa7..0000000
--- a/audio/effect/5.0/xml/audio_effects_conf.xsd
+++ /dev/null
@@ -1 +0,0 @@
-../../2.0/xml/audio_effects_conf.xsd
\ No newline at end of file
diff --git a/automotive/can/1.0/default/tests/fuzzer/AutomotiveCanV1_0Fuzzer.cpp b/automotive/can/1.0/default/tests/fuzzer/AutomotiveCanV1_0Fuzzer.cpp
index 96110db..e882160 100644
--- a/automotive/can/1.0/default/tests/fuzzer/AutomotiveCanV1_0Fuzzer.cpp
+++ b/automotive/can/1.0/default/tests/fuzzer/AutomotiveCanV1_0Fuzzer.cpp
@@ -18,9 +18,9 @@
 
 namespace android::hardware::automotive::can::V1_0::implementation::fuzzer {
 
-constexpr CanController::InterfaceType kInterfaceType[] = {CanController::InterfaceType::VIRTUAL,
-                                                           CanController::InterfaceType::SOCKETCAN,
-                                                           CanController::InterfaceType::SLCAN};
+constexpr CanController::InterfaceType kInterfaceType[] = {
+        CanController::InterfaceType::VIRTUAL, CanController::InterfaceType::SOCKETCAN,
+        CanController::InterfaceType::SLCAN, CanController::InterfaceType::INDEXED};
 constexpr FilterFlag kFilterFlag[] = {FilterFlag::DONT_CARE, FilterFlag::SET, FilterFlag::NOT_SET};
 constexpr size_t kInterfaceTypeLength = std::size(kInterfaceType);
 constexpr size_t kFilterFlagLength = std::size(kFilterFlag);
@@ -28,8 +28,8 @@
 constexpr size_t kMaxPayloadBytes = 64;
 constexpr size_t kMaxFilters = 20;
 constexpr size_t kMaxSerialNumber = 1000;
-constexpr size_t kMaxBuses = 10;
-constexpr size_t kMaxRepeat = 5;
+constexpr size_t kMaxBuses = 100;
+constexpr size_t kMaxRepeat = 100;
 
 Bus CanFuzzer::makeBus() {
     ICanController::BusConfig config = {};
@@ -56,9 +56,13 @@
 }
 
 void CanFuzzer::invokeUpInterface() {
-    const CanController::InterfaceType iftype =
-            kInterfaceType[mFuzzedDataProvider->ConsumeIntegralInRange<size_t>(
-                    0, kInterfaceTypeLength - 1)];
+    CanController::InterfaceType controller;
+    if (mFuzzedDataProvider->ConsumeBool()) {
+        controller = (CanController::InterfaceType)mFuzzedDataProvider->ConsumeIntegral<uint8_t>();
+    } else {
+        controller = kInterfaceType[mFuzzedDataProvider->ConsumeIntegralInRange<size_t>(
+                0, kInterfaceTypeLength - 1)];
+    }
     std::string configName;
 
     if (const bool shouldInvokeValidBus = mFuzzedDataProvider->ConsumeBool();
@@ -73,7 +77,7 @@
 
     ICanController::BusConfig config = {.name = configName};
 
-    if (iftype == CanController::InterfaceType::SOCKETCAN) {
+    if (controller == CanController::InterfaceType::SOCKETCAN) {
         CanController::BusConfig::InterfaceId::Socketcan socketcan = {};
         if (const bool shouldPassSerialSocket = mFuzzedDataProvider->ConsumeBool();
             shouldPassSerialSocket) {
@@ -83,7 +87,7 @@
             socketcan.ifname(ifname);
         }
         config.interfaceId.socketcan(socketcan);
-    } else if (iftype == CanController::InterfaceType::SLCAN) {
+    } else if (controller == CanController::InterfaceType::SLCAN) {
         CanController::BusConfig::InterfaceId::Slcan slcan = {};
         if (const bool shouldPassSerialSlcan = mFuzzedDataProvider->ConsumeBool();
             shouldPassSerialSlcan) {
@@ -93,8 +97,12 @@
             slcan.ttyname(ifname);
         }
         config.interfaceId.slcan(slcan);
-    } else if (iftype == CanController::InterfaceType::VIRTUAL) {
+    } else if (controller == CanController::InterfaceType::VIRTUAL) {
         config.interfaceId.virtualif({ifname});
+    } else if (controller == CanController::InterfaceType::INDEXED) {
+        CanController::BusConfig::InterfaceId::Indexed indexed;
+        indexed.index = mFuzzedDataProvider->ConsumeIntegral<uint8_t>();
+        config.interfaceId.indexed(indexed);
     }
 
     const size_t numInvocations =
@@ -108,8 +116,13 @@
     hidl_string configName;
     if (const bool shouldInvokeValidBus = mFuzzedDataProvider->ConsumeBool();
         (shouldInvokeValidBus) && (mBusNames.size() > 0)) {
-        const size_t busNameIndex =
-                mFuzzedDataProvider->ConsumeIntegralInRange<size_t>(0, mBusNames.size() - 1);
+        size_t busNameIndex;
+        if (mBusNames.size() == 1) {
+            busNameIndex = 0;
+        } else {
+            busNameIndex =
+                    mFuzzedDataProvider->ConsumeIntegralInRange<size_t>(0, mBusNames.size() - 1);
+        }
         configName = mBusNames[busNameIndex];
     } else {
         configName = mFuzzedDataProvider->ConsumeRandomLengthString(kMaxCharacters);
@@ -122,12 +135,6 @@
     }
 }
 
-void CanFuzzer::invokeController() {
-    getSupportedInterfaceTypes();
-    invokeUpInterface();
-    invokeDownInterface();
-}
-
 void CanFuzzer::invokeBus() {
     const size_t numBuses = mFuzzedDataProvider->ConsumeIntegralInRange<size_t>(1, kMaxBuses);
     for (size_t i = 0; i < numBuses; ++i) {
@@ -152,12 +159,22 @@
             for (uint32_t k = 0; k < numFilters; ++k) {
                 filterVector[k].id = mFuzzedDataProvider->ConsumeIntegral<uint32_t>();
                 filterVector[k].mask = mFuzzedDataProvider->ConsumeIntegral<uint32_t>();
-                filterVector[k].rtr =
-                        kFilterFlag[mFuzzedDataProvider->ConsumeIntegralInRange<size_t>(
-                                0, kFilterFlagLength - 1)];
-                filterVector[k].extendedFormat =
-                        kFilterFlag[mFuzzedDataProvider->ConsumeIntegralInRange<size_t>(
-                                0, kFilterFlagLength - 1)];
+                if (mFuzzedDataProvider->ConsumeBool()) {
+                    filterVector[k].rtr =
+                            (FilterFlag)mFuzzedDataProvider->ConsumeIntegral<uint8_t>();
+                } else {
+                    filterVector[k].rtr =
+                            kFilterFlag[mFuzzedDataProvider->ConsumeIntegralInRange<size_t>(
+                                    0, kFilterFlagLength - 1)];
+                }
+                if (mFuzzedDataProvider->ConsumeBool()) {
+                    filterVector[k].extendedFormat =
+                            (FilterFlag)mFuzzedDataProvider->ConsumeIntegral<uint8_t>();
+                } else {
+                    filterVector[k].extendedFormat =
+                            kFilterFlag[mFuzzedDataProvider->ConsumeIntegralInRange<size_t>(
+                                    0, kFilterFlagLength - 1)];
+                }
                 filterVector[k].exclude = mFuzzedDataProvider->ConsumeBool();
             }
             auto listener = listeningBus.listen(filterVector);
@@ -175,8 +192,16 @@
 
 void CanFuzzer::process(const uint8_t* data, size_t size) {
     mFuzzedDataProvider = new FuzzedDataProvider(data, size);
-    invokeController();
-    invokeBus();
+    while (mFuzzedDataProvider->remaining_bytes()) {
+        auto CanFuzzerFunction =
+                mFuzzedDataProvider->PickValueInArray<const std::function<void()>>({
+                        [&]() { getSupportedInterfaceTypes(); },
+                        [&]() { invokeUpInterface(); },
+                        [&]() { invokeDownInterface(); },
+                        [&]() { invokeBus(); },
+                });
+        CanFuzzerFunction();
+    }
 }
 
 bool CanFuzzer::init() {
diff --git a/automotive/can/1.0/default/tests/fuzzer/AutomotiveCanV1_0Fuzzer.h b/automotive/can/1.0/default/tests/fuzzer/AutomotiveCanV1_0Fuzzer.h
index 930cddd..3211bd0 100644
--- a/automotive/can/1.0/default/tests/fuzzer/AutomotiveCanV1_0Fuzzer.h
+++ b/automotive/can/1.0/default/tests/fuzzer/AutomotiveCanV1_0Fuzzer.h
@@ -116,7 +116,6 @@
     hidl_vec<hidl_string> getBusNames();
     void getSupportedInterfaceTypes();
     void invokeBus();
-    void invokeController();
     void invokeUpInterface();
     void invokeDownInterface();
     FuzzedDataProvider* mFuzzedDataProvider = nullptr;
diff --git a/automotive/vehicle/2.0/default/tests/fuzzer/VehicleManager_fuzzer.cpp b/automotive/vehicle/2.0/default/tests/fuzzer/VehicleManager_fuzzer.cpp
index 8a085e5..4d0995d 100644
--- a/automotive/vehicle/2.0/default/tests/fuzzer/VehicleManager_fuzzer.cpp
+++ b/automotive/vehicle/2.0/default/tests/fuzzer/VehicleManager_fuzzer.cpp
@@ -76,30 +76,20 @@
 using ::android::hardware::automotive::vehicle::V2_0::vms::VmsLayerOffering;
 using ::android::hardware::automotive::vehicle::V2_0::vms::VmsOffers;
 
-constexpr const char kCarMake[] = "Default Car";
-constexpr VehicleProperty kVehicleProp[] = {VehicleProperty::INVALID,
-                                            VehicleProperty::HVAC_FAN_SPEED,
-                                            VehicleProperty::INFO_MAKE,
-                                            VehicleProperty::DISPLAY_BRIGHTNESS,
-                                            VehicleProperty::INFO_FUEL_CAPACITY,
-                                            VehicleProperty::HVAC_SEAT_TEMPERATURE};
-constexpr DiagnosticIntegerSensorIndex kDiagnosticIntIndex[] = {
-        DiagnosticIntegerSensorIndex::FUEL_SYSTEM_STATUS,
-        DiagnosticIntegerSensorIndex::MALFUNCTION_INDICATOR_LIGHT_ON,
-        DiagnosticIntegerSensorIndex::NUM_OXYGEN_SENSORS_PRESENT,
-        DiagnosticIntegerSensorIndex::FUEL_TYPE};
-constexpr DiagnosticFloatSensorIndex kDiagnosticFloatIndex[] = {
-        DiagnosticFloatSensorIndex::CALCULATED_ENGINE_LOAD,
-        DiagnosticFloatSensorIndex::SHORT_TERM_FUEL_TRIM_BANK1,
-        DiagnosticFloatSensorIndex::LONG_TERM_FUEL_TRIM_BANK1,
-        DiagnosticFloatSensorIndex::THROTTLE_POSITION};
-constexpr size_t kVehiclePropArrayLength = std::size(kVehicleProp);
-constexpr size_t kIntSensorArrayLength = std::size(kDiagnosticIntIndex);
-constexpr size_t kFloatSensorArrayLength = std::size(kDiagnosticFloatIndex);
-constexpr VmsMessageType kAvailabilityMessageType[] = {VmsMessageType::AVAILABILITY_CHANGE,
-                                                       VmsMessageType::AVAILABILITY_RESPONSE};
-constexpr VmsMessageType kSubscriptionMessageType[] = {VmsMessageType::SUBSCRIPTIONS_CHANGE,
-                                                       VmsMessageType::SUBSCRIPTIONS_RESPONSE};
+std::string kCarMake;
+constexpr int32_t kMaxCaseMessage = 8;
+constexpr int32_t kMaxRuns = 20;
+constexpr int32_t kMaxSize = 1000;
+constexpr int32_t kMinSize = 0;
+constexpr int32_t kMaxFileSize = 100;
+float kFloatValue;
+std::vector<int32_t> kVec32;
+std::vector<int64_t> kVec64;
+std::vector<uint8_t> kVec8;
+std::vector<float> kVecFloat;
+static const std::vector<std::string> kSampleDtcs = {"P0070",
+                                                     "P0102"
+                                                     "P0123"};
 
 MockedVehicleHal::VehiclePropValuePtr MockedVehicleHal::get(
         const VehiclePropValue& requestedPropValue, StatusCode* outStatus) {
@@ -113,23 +103,23 @@
 
     switch (property) {
         case VehicleProperty::INFO_MAKE:
-            pValue = getValuePool()->obtainString(kCarMake);
+            pValue = getValuePool()->obtainString(kCarMake.c_str());
             break;
         case VehicleProperty::INFO_FUEL_CAPACITY:
             if (mFuelCapacityAttemptsLeft-- > 0) {
                 *outStatus = StatusCode::TRY_AGAIN;
             } else {
-                pValue = getValuePool()->obtainFloat(42.42);
+                pValue = getValuePool()->obtainFloat(kFloatValue);
             }
             break;
         default:
             if (requestedPropValue.prop == kCustomComplexProperty) {
                 pValue = getValuePool()->obtainComplex();
-                pValue->value.int32Values = hidl_vec<int32_t>{10, 20};
-                pValue->value.int64Values = hidl_vec<int64_t>{30, 40};
-                pValue->value.floatValues = hidl_vec<float_t>{1.1, 2.2};
-                pValue->value.bytes = hidl_vec<uint8_t>{1, 2, 3};
-                pValue->value.stringValue = kCarMake;
+                pValue->value.int32Values = hidl_vec<int32_t>{kVec32};
+                pValue->value.int64Values = hidl_vec<int64_t>{kVec64};
+                pValue->value.floatValues = hidl_vec<float_t>{kVecFloat};
+                pValue->value.bytes = hidl_vec<uint8_t>{kVec8};
+                pValue->value.stringValue = kCarMake.c_str();
                 break;
             }
             auto key = makeKey(toInt(property), areaId);
@@ -145,28 +135,72 @@
     return pValue;
 }
 
+void VehicleHalManagerFuzzer::initValue() {
+    kCarMake = mFuzzedDataProvider->ConsumeRandomLengthString(kMaxFileSize);
+    kFloatValue = mFuzzedDataProvider->ConsumeFloatingPoint<float>();
+    fillParameter<int32_t>(mFuzzedDataProvider->ConsumeIntegralInRange<size_t>(kMinSize, kMaxSize),
+                           kVec32);
+    fillParameter<int64_t>(mFuzzedDataProvider->ConsumeIntegralInRange<size_t>(kMinSize, kMaxSize),
+                           kVec64);
+    fillParameter<uint8_t>(mFuzzedDataProvider->ConsumeIntegralInRange<size_t>(kMinSize, kMaxSize),
+                           kVec8);
+    size_t size = mFuzzedDataProvider->ConsumeIntegralInRange<size_t>(kMinSize, kMaxSize);
+    for (size_t i = 0; i < size; ++i) {
+        kVecFloat.push_back(mFuzzedDataProvider->ConsumeFloatingPoint<float>());
+    }
+}
+
 void VehicleHalManagerFuzzer::process(const uint8_t* data, size_t size) {
     mFuzzedDataProvider = new FuzzedDataProvider(data, size);
-    invokeDebug();
-    invokePropConfigs();
-    invokeSubscribe();
-    invokeSetAndGetValues();
-    invokeObd2SensorStore();
-    invokeVmsUtils();
-    invokeVehiclePropStore();
-    invokeWatchDogClient();
+    initValue();
+    /* Limited while loop runs to prevent timeouts caused
+     * by repeated calls to high-execution-time APIs.
+     */
+    size_t maxRuns = mFuzzedDataProvider->ConsumeIntegralInRange<size_t>(kMinSize, kMaxRuns);
+    size_t itr = 0;
+    while (mFuzzedDataProvider->remaining_bytes() && ++itr <= maxRuns) {
+        auto invokeVehicleHalManagerFuzzer =
+                mFuzzedDataProvider->PickValueInArray<const std::function<void()>>({
+                        [&]() { invokeDebug(); },
+                        [&]() { invokePropConfigs(); },
+                        [&]() { invokeSubscribe(); },
+                        [&]() { invokeSetAndGetValues(); },
+                        [&]() { invokeObd2SensorStore(); },
+                        [&]() { invokeVmsUtils(); },
+                        [&]() { invokeVehiclePropStore(); },
+                        [&]() { invokeWatchDogClient(); },
+                });
+        invokeVehicleHalManagerFuzzer();
+    }
 }
 
 void VehicleHalManagerFuzzer::invokeDebug() {
-    hidl_string debugOption = mFuzzedDataProvider->PickValueInArray(
-            {"--help", "--list", "--get", "--set", "", "invalid"});
     hidl_handle fd = {};
 
     native_handle_t* rawHandle = native_handle_create(/*numFds=*/1, /*numInts=*/0);
     fd.setTo(native_handle_clone(rawHandle), /*shouldOwn=*/true);
+    int32_t size = mFuzzedDataProvider->ConsumeIntegralInRange<int32_t>(kMinSize, kMaxFileSize);
+    hidl_vec<hidl_string> options(size);
 
-    mManager->debug(fd, {});
-    mManager->debug(fd, {debugOption});
+    for (int32_t idx = 0; idx < size; ++idx) {
+        if (idx == 0 && mFuzzedDataProvider->ConsumeBool()) {
+            options[idx] = mFuzzedDataProvider->PickValueInArray(
+                    {"--help", "--list", "--get", "--set", "", "invalid"});
+        } else if (idx == 2 && mFuzzedDataProvider->ConsumeBool()) {
+            options[idx] =
+                    mFuzzedDataProvider->PickValueInArray({"-i", "-i64", "-f", "-s", "-b", "-a"});
+        } else if (mFuzzedDataProvider->ConsumeBool()) {
+            options[idx] = mFuzzedDataProvider->ConsumeRandomLengthString(kMaxSize);
+        } else {
+            options[idx] = std::to_string(mFuzzedDataProvider->ConsumeIntegral<int32_t>());
+        }
+    }
+
+    if (mFuzzedDataProvider->ConsumeBool()) {
+        mManager->debug(fd, {});
+    } else {
+        mManager->debug(fd, options);
+    }
     native_handle_delete(rawHandle);
 }
 
@@ -175,178 +209,245 @@
     int32_t vehicleProp2 = mFuzzedDataProvider->ConsumeIntegral<int32_t>();
 
     hidl_vec<int32_t> properties = {vehicleProp1, vehicleProp2};
+    auto invokePropConfigsAPI = mFuzzedDataProvider->PickValueInArray<const std::function<void()>>({
+            [&]() {
+                mManager->getPropConfigs(
+                        properties, []([[maybe_unused]] StatusCode status,
+                                       [[maybe_unused]] const hidl_vec<VehiclePropConfig>& c) {});
+            },
+            [&]() {
+                mManager->getPropConfigs(
+                        {mFuzzedDataProvider->ConsumeIntegral<int32_t>()},
+                        []([[maybe_unused]] StatusCode status,
+                           [[maybe_unused]] const hidl_vec<VehiclePropConfig>& c) {});
+            },
+            [&]() {
+                mManager->getAllPropConfigs(
+                        []([[maybe_unused]] const hidl_vec<VehiclePropConfig>& propConfigs) {});
+            },
 
-    mManager->getPropConfigs(properties,
-                             []([[maybe_unused]] StatusCode status,
-                                [[maybe_unused]] const hidl_vec<VehiclePropConfig>& c) {});
-
-    mManager->getPropConfigs({toInt(kVehicleProp[abs(vehicleProp1) % kVehiclePropArrayLength])},
-                             []([[maybe_unused]] StatusCode status,
-                                [[maybe_unused]] const hidl_vec<VehiclePropConfig>& c) {});
-
-    mManager->getAllPropConfigs(
-            []([[maybe_unused]] const hidl_vec<VehiclePropConfig>& propConfigs) {});
+    });
+    invokePropConfigsAPI();
 }
 
 void VehicleHalManagerFuzzer::invokeSubscribe() {
-    int32_t vehicleProp1 = mFuzzedDataProvider->ConsumeIntegral<int32_t>();
     int32_t vehicleProp2 = mFuzzedDataProvider->ConsumeIntegral<int32_t>();
     int32_t vehicleProp3 = mFuzzedDataProvider->ConsumeIntegral<int32_t>();
 
-    const auto prop1 = toInt(kVehicleProp[abs(vehicleProp1) % kVehiclePropArrayLength]);
     sp<MockedVehicleCallback> cb = new MockedVehicleCallback();
+    VehiclePropertyType type =
+            static_cast<VehiclePropertyType>(mFuzzedDataProvider->ConsumeIntegral<int32_t>());
 
-    hidl_vec<SubscribeOptions> options = {
-            SubscribeOptions{.propId = prop1, .flags = SubscribeFlags::EVENTS_FROM_CAR}};
+    auto invokeSubscribeAPI = mFuzzedDataProvider->PickValueInArray<const std::function<void()>>({
+            [&]() {
+                size_t size =
+                        mFuzzedDataProvider->ConsumeIntegralInRange<size_t>(kMinSize, kMaxSize);
+                hidl_vec<SubscribeOptions> options(size);
+                for (size_t idx = 0; idx < size; ++idx) {
+                    options[idx] = {SubscribeOptions{
+                            .propId = mFuzzedDataProvider->ConsumeIntegral<int32_t>(),
+                            .flags = static_cast<SubscribeFlags>(
+                                    mFuzzedDataProvider->ConsumeIntegral<int32_t>())}};
+                }
+                mManager->subscribe(cb, options);
+            },
+            [&]() {
+                auto unsubscribedValue = mObjectPool->obtain(type);
+                if (!unsubscribedValue) {
+                    return;
+                }
+                unsubscribedValue->prop = vehicleProp2;
+                unsubscribedValue->value.int32Values[0] = INT32_MAX;
+                mHal->sendPropEvent(std::move(unsubscribedValue));
+                cb->waitForExpectedEvents(mFuzzedDataProvider->ConsumeIntegral<size_t>());
+            },
+            [&]() {
+                const auto prop1 = mFuzzedDataProvider->ConsumeIntegral<int32_t>();
+                mManager->unsubscribe(cb, prop1);
+            },
+            [&]() {
+                mHal->sendHalError(StatusCode::TRY_AGAIN, vehicleProp3,
+                                   mFuzzedDataProvider->ConsumeIntegral<int32_t>() /*areaId=*/);
+            },
 
-    mManager->subscribe(cb, options);
-
-    auto unsubscribedValue = mObjectPool->obtain(VehiclePropertyType::INT32);
-    unsubscribedValue->prop = toInt(kVehicleProp[abs(vehicleProp2) % kVehiclePropArrayLength]);
-
-    mHal->sendPropEvent(std::move(unsubscribedValue));
-    cb->getReceivedEvents();
-    cb->waitForExpectedEvents(0);
-
-    auto subscribedValue = mObjectPool->obtain(VehiclePropertyType::INT32);
-    subscribedValue->prop = toInt(kVehicleProp[abs(vehicleProp2) % kVehiclePropArrayLength]);
-    subscribedValue->value.int32Values[0] = INT32_MAX;
-
-    cb->reset();
-    VehiclePropValue actualValue(*subscribedValue.get());
-    mHal->sendPropEvent(std::move(subscribedValue));
-    cb->waitForExpectedEvents(1);
-    mManager->unsubscribe(cb, prop1);
-
-    sp<MockedVehicleCallback> cb2 = new MockedVehicleCallback();
-
-    hidl_vec<SubscribeOptions> options2 = {
-            SubscribeOptions{
-                    .propId = toInt(kVehicleProp[abs(vehicleProp3) % kVehiclePropArrayLength]),
-                    .flags = SubscribeFlags::EVENTS_FROM_CAR},
-    };
-
-    mManager->subscribe(cb2, options2);
-
-    mHal->sendHalError(StatusCode::TRY_AGAIN,
-                       toInt(kVehicleProp[abs(vehicleProp3) % kVehiclePropArrayLength]),
-                       /*areaId=*/0);
+    });
+    invokeSubscribeAPI();
 }
 
 void VehicleHalManagerFuzzer::invokeSetAndGetValues() {
-    uint32_t vehicleProp1 =
-            mFuzzedDataProvider->ConsumeIntegralInRange<uint32_t>(0, kVehiclePropArrayLength - 1);
-    uint32_t vehicleProp2 =
-            mFuzzedDataProvider->ConsumeIntegralInRange<uint32_t>(0, kVehiclePropArrayLength - 1);
-    uint32_t vehicleProp3 =
-            mFuzzedDataProvider->ConsumeIntegralInRange<uint32_t>(0, kVehiclePropArrayLength - 1);
-
-    invokeGet(kCustomComplexProperty, 0);
-    invokeGet(toInt(kVehicleProp[vehicleProp2]), 0);
-    invokeGet(toInt(kVehicleProp[vehicleProp1]), 0);
-
-    auto expectedValue = mObjectPool->obtainInt32(mFuzzedDataProvider->ConsumeIntegral<int32_t>());
-    mObjectPool->obtainInt64(mFuzzedDataProvider->ConsumeIntegral<int64_t>());
-    mObjectPool->obtainFloat(mFuzzedDataProvider->ConsumeFloatingPoint<float>());
-    mObjectPool->obtainBoolean(mFuzzedDataProvider->ConsumeBool());
-    expectedValue->prop = toInt(kVehicleProp[vehicleProp2]);
-    expectedValue->areaId = 0;
-
-    mManager->set(*expectedValue.get());
-    invokeGet(toInt(kVehicleProp[vehicleProp2]), 0);
-    expectedValue->prop = toInt(kVehicleProp[vehicleProp3]);
-    mManager->set(*expectedValue.get());
-    expectedValue->prop = toInt(VehicleProperty::INVALID);
-    mManager->set(*expectedValue.get());
+    auto invokeSetAndGetAPI = mFuzzedDataProvider->PickValueInArray<const std::function<void()>>({
+            [&]() {
+                invokeGet(mFuzzedDataProvider->ConsumeIntegral<int32_t>(),
+                          mFuzzedDataProvider->ConsumeIntegral<int32_t>());
+            },
+            [&]() { mObjectPool->obtainInt64(mFuzzedDataProvider->ConsumeIntegral<int64_t>()); },
+            [&]() { mObjectPool->obtainFloat(mFuzzedDataProvider->ConsumeFloatingPoint<float>()); },
+            [&]() { mObjectPool->obtainBoolean(mFuzzedDataProvider->ConsumeBool()); },
+            [&]() {
+                int32_t vehicleProp2 = mFuzzedDataProvider->ConsumeIntegral<int32_t>();
+                auto expectedValue =
+                        mObjectPool->obtainInt32(mFuzzedDataProvider->ConsumeIntegral<int32_t>());
+                expectedValue->prop = vehicleProp2;
+                expectedValue->areaId = mFuzzedDataProvider->ConsumeIntegral<int32_t>();
+                mManager->set(*expectedValue.get());
+            },
+    });
+    invokeSetAndGetAPI();
 }
 
 void VehicleHalManagerFuzzer::invokeObd2SensorStore() {
-    uint32_t diagnosticIntIndex =
-            mFuzzedDataProvider->ConsumeIntegralInRange<uint32_t>(0, kIntSensorArrayLength - 1);
-    int32_t diagnosticIntValue = mFuzzedDataProvider->ConsumeIntegral<int32_t>();
-    uint32_t diagnosticFloatIndex =
-            mFuzzedDataProvider->ConsumeIntegralInRange<uint32_t>(0, kFloatSensorArrayLength - 1);
-    float diagnosticFloatValue = mFuzzedDataProvider->ConsumeFloatingPoint<float>();
+    size_t diagnosticInt = mFuzzedDataProvider->ConsumeIntegralInRange<size_t>(kMinSize, kMaxSize);
+    size_t diagnosticFloat =
+            mFuzzedDataProvider->ConsumeIntegralInRange<size_t>(kMinSize, kMaxSize);
 
     std::unique_ptr<Obd2SensorStore> sensorStore(
-            new Obd2SensorStore(kIntSensorArrayLength, kFloatSensorArrayLength));
-    if (sensorStore) {
-        sensorStore->setIntegerSensor(kDiagnosticIntIndex[diagnosticIntIndex], diagnosticIntValue);
-        sensorStore->setFloatSensor(kDiagnosticFloatIndex[diagnosticFloatIndex],
-                                    diagnosticFloatValue);
-        sensorStore->getIntegerSensors();
-        sensorStore->getFloatSensors();
-        sensorStore->getSensorsBitmask();
-        static std::vector<std::string> sampleDtcs = {"P0070",
-                                                      "P0102"
-                                                      "P0123"};
-        for (auto&& dtc : sampleDtcs) {
-            auto freezeFrame = createVehiclePropValue(VehiclePropertyType::MIXED, 0);
-            sensorStore->fillPropValue(dtc, freezeFrame.get());
-            freezeFrame->prop = static_cast<int>(VehicleProperty::OBD2_FREEZE_FRAME);
-        }
+            new Obd2SensorStore(diagnosticInt, diagnosticFloat));
+
+    if (!sensorStore.get()) {
+        return;
     }
+
+    auto invokeObd2SensorStoreAPI =
+            mFuzzedDataProvider->PickValueInArray<const std::function<void()>>({
+                    [&]() {
+                        int32_t diagnosticIntValue =
+                                mFuzzedDataProvider->ConsumeIntegral<int32_t>();
+                        int32_t diagnosticIntIndex =
+                                mFuzzedDataProvider->ConsumeIntegralInRange<int32_t>(
+                                        kMinSize,
+                                        toInt(DiagnosticIntegerSensorIndex::LAST_SYSTEM_INDEX) +
+                                                diagnosticInt);
+                        sensorStore->setIntegerSensor(
+                                static_cast<DiagnosticIntegerSensorIndex>(diagnosticIntIndex),
+                                diagnosticIntValue);
+                    },
+                    [&]() {
+                        float diagnosticFloatValue =
+                                mFuzzedDataProvider->ConsumeFloatingPoint<float>();
+                        int32_t diagnosticFloatIndex =
+                                mFuzzedDataProvider->ConsumeIntegralInRange<int32_t>(
+                                        kMinSize,
+                                        toInt(DiagnosticFloatSensorIndex::LAST_SYSTEM_INDEX) +
+                                                diagnosticFloat);
+                        sensorStore->setFloatSensor(
+                                static_cast<DiagnosticFloatSensorIndex>(diagnosticFloatIndex),
+                                diagnosticFloatValue);
+                    },
+                    [&]() { sensorStore->getIntegerSensors(); },
+                    [&]() { sensorStore->getFloatSensors(); },
+                    [&]() { sensorStore->getSensorsBitmask(); },
+                    [&]() {
+                        for (auto&& dtc : kSampleDtcs) {
+                            VehiclePropertyType type = static_cast<VehiclePropertyType>(
+                                    mFuzzedDataProvider->ConsumeIntegral<int32_t>());
+                            auto freezeFrame = createVehiclePropValue(
+                                    type, mFuzzedDataProvider->ConsumeIntegralInRange<int32_t>(
+                                                  kMinSize, kMaxSize));
+                            if (!freezeFrame.get()) {
+                                return;
+                            }
+                            freezeFrame->prop = mFuzzedDataProvider->ConsumeIntegral<int32_t>();
+                            sensorStore->fillPropValue(dtc, freezeFrame.get());
+                        }
+                    },
+            });
+    invokeObd2SensorStoreAPI();
 }
 
 void VehicleHalManagerFuzzer::invokeVmsUtils() {
-    bool availabilityMsgType = mFuzzedDataProvider->ConsumeBool();
-    bool subscriptionMsgType = mFuzzedDataProvider->ConsumeBool();
+    std::unique_ptr<VehiclePropValue> message;
     int32_t intValue = mFuzzedDataProvider->ConsumeIntegral<int32_t>();
+    VmsLayer layer(mFuzzedDataProvider->ConsumeIntegral<int32_t>(),
+                   mFuzzedDataProvider->ConsumeIntegral<int32_t>(),
+                   mFuzzedDataProvider->ConsumeIntegral<int32_t>());
+    VmsOffers offers = {
+            intValue,
+            {VmsLayerOffering(VmsLayer(mFuzzedDataProvider->ConsumeIntegral<int32_t>(),
+                                       mFuzzedDataProvider->ConsumeIntegral<int32_t>(),
+                                       mFuzzedDataProvider->ConsumeIntegral<int32_t>()))}};
+    const VmsLayerAndPublisher layer_and_publisher(
+            VmsLayer(mFuzzedDataProvider->ConsumeIntegral<int32_t>(),
+                     mFuzzedDataProvider->ConsumeIntegral<int32_t>(),
+                     mFuzzedDataProvider->ConsumeIntegral<int32_t>()),
+            intValue);
 
-    VmsLayer layer(1, 0, 2);
-    auto message = createSubscribeMessage(layer);
+    switch (mFuzzedDataProvider->ConsumeIntegralInRange<int32_t>(kMinSize, kMaxCaseMessage)) {
+        case 0: {
+            message = createSubscribeMessage(layer);
+            break;
+        }
+        case 1: {
+            message = createUnsubscribeMessage(layer);
+            break;
+        }
+        case 2: {
+            message = createSubscriptionsRequest();
+            break;
+        }
+        case 3: {
+            message = createOfferingMessage(offers);
+            break;
+        }
+        case 4: {
+            message = createAvailabilityRequest();
+            break;
+        }
+        case 5: {
+            std::string pub_bytes;
+            if (mFuzzedDataProvider->ConsumeBool()) {
+                pub_bytes = "pub_id";
+            } else {
+                pub_bytes = mFuzzedDataProvider->ConsumeRandomLengthString(kMaxFileSize);
+            }
+            message = createPublisherIdRequest(pub_bytes);
+            break;
+        }
+        case 6: {
+            std::string bytes = "placeholder";
+            if (mFuzzedDataProvider->ConsumeBool()) {
+                bytes = "placeholder";
+            } else {
+                bytes = mFuzzedDataProvider->ConsumeRandomLengthString(kMaxFileSize);
+            }
+            message = createDataMessageWithLayerPublisherInfo(layer_and_publisher, bytes);
+            break;
+        }
+        case 7: {
+            message = createBaseVmsMessage(
+                    mFuzzedDataProvider->ConsumeIntegralInRange<size_t>(kMinSize, kMaxSize));
+            break;
+        }
+        case 8: {
+            message = createStartSessionMessage(intValue, intValue + 1);
+            break;
+        }
+    }
+
     isValidVmsMessage(*message);
-    message = createUnsubscribeMessage(layer);
-
-    VmsOffers offers = {intValue, {VmsLayerOffering(VmsLayer(1, 0, 2))}};
-    message = createOfferingMessage(offers);
-    std::vector<VmsLayer> dependencies = {VmsLayer(2, 0, 2), VmsLayer(3, 0, 3)};
-    std::vector<VmsLayerOffering> offering = {VmsLayerOffering(layer, dependencies)};
-    offers = {intValue, offering};
-    message = createOfferingMessage(offers);
-
-    message = createAvailabilityRequest();
-    message = createSubscriptionsRequest();
-
-    std::string bytes = "placeholder";
-    const VmsLayerAndPublisher layer_and_publisher(VmsLayer(2, 0, 1), intValue);
-    message = createDataMessageWithLayerPublisherInfo(layer_and_publisher, bytes);
-    parseData(*message);
-    createSubscribeToPublisherMessage(layer_and_publisher);
-    createUnsubscribeToPublisherMessage(layer_and_publisher);
-
-    std::string pub_bytes = "pub_id";
-    message = createPublisherIdRequest(pub_bytes);
-    message = createBaseVmsMessage(2);
     message->value.int32Values =
-            hidl_vec<int32_t>{toInt(VmsMessageType::PUBLISHER_ID_RESPONSE), intValue};
-    parsePublisherIdResponse(*message);
+            hidl_vec<int32_t>{mFuzzedDataProvider->ConsumeIntegral<int32_t>(), intValue};
 
-    message->value.int32Values =
-            hidl_vec<int32_t>{toInt(kSubscriptionMessageType[subscriptionMsgType]), intValue};
-    getSequenceNumberForSubscriptionsState(*message);
-
-    message->value.int32Values = hidl_vec<int32_t>{toInt(kSubscriptionMessageType[0]), intValue};
-    isSequenceNumberNewer(*message, intValue + 1);
-    invokeGetSubscribedLayers(kSubscriptionMessageType[subscriptionMsgType]);
-
-    message->value.int32Values =
-            hidl_vec<int32_t>{toInt(kAvailabilityMessageType[availabilityMsgType]), 0};
-    hasServiceNewlyStarted(*message);
-    message = createStartSessionMessage(intValue, intValue + 1);
-    parseMessageType(*message);
-
-    message->value.int32Values =
-            hidl_vec<int32_t>{toInt(kAvailabilityMessageType[availabilityMsgType]), intValue};
-    isAvailabilitySequenceNumberNewer(*message, intValue + 1);
-
-    message->value.int32Values =
-            hidl_vec<int32_t>{toInt(kAvailabilityMessageType[availabilityMsgType]), intValue};
-    getSequenceNumberForAvailabilityState(*message);
-    message = createBaseVmsMessage(3);
-    int new_service_id;
-    message->value.int32Values = hidl_vec<int32_t>{toInt(VmsMessageType::START_SESSION), 0, -1};
-    parseStartSessionMessage(*message, -1, 0, &new_service_id);
+    auto invokeVmsUtilsAPI = mFuzzedDataProvider->PickValueInArray<const std::function<void()>>({
+            [&]() { parseData(*message); },
+            [&]() { createSubscribeToPublisherMessage(layer_and_publisher); },
+            [&]() { createUnsubscribeToPublisherMessage(layer_and_publisher); },
+            [&]() { parsePublisherIdResponse(*message); },
+            [&]() { getSequenceNumberForSubscriptionsState(*message); },
+            [&]() { isSequenceNumberNewer(*message, intValue + 1); },
+            [&]() {
+                invokeGetSubscribedLayers(
+                        (VmsMessageType)mFuzzedDataProvider->ConsumeIntegral<int32_t>());
+            },
+            [&]() { hasServiceNewlyStarted(*message); },
+            [&]() { parseMessageType(*message); },
+            [&]() { isAvailabilitySequenceNumberNewer(*message, intValue + 1); },
+            [&]() { getSequenceNumberForAvailabilityState(*message); },
+            [&]() {
+                int32_t new_service_id;
+                parseStartSessionMessage(*message, -1, 0, &new_service_id);
+            },
+    });
+    invokeVmsUtilsAPI();
 }
 
 void VehicleHalManagerFuzzer::invokeGet(int32_t property, int32_t areaId) {
@@ -367,27 +468,31 @@
     mActualStatusCode = refStatus;
 }
 
-void VehicleHalManagerFuzzer::invokeGetSubscribedLayers(VmsMessageType type) {
-    VmsOffers offers = {123,
-                        {VmsLayerOffering(VmsLayer(1, 0, 1), {VmsLayer(4, 1, 1)}),
-                         VmsLayerOffering(VmsLayer(2, 0, 1))}};
-    auto message = createBaseVmsMessage(16);
-    message->value.int32Values = hidl_vec<int32_t>{toInt(type),
-                                                   1234,  // sequence number
-                                                   2,     // number of layers
-                                                   1,     // number of associated layers
-                                                   1,     // layer 1
-                                                   0,           1,
-                                                   4,  // layer 2
-                                                   1,           1,
-                                                   2,  // associated layer
-                                                   0,           1,
-                                                   2,    // number of publisher IDs
-                                                   111,  // publisher IDs
-                                                   123};
-    isValidVmsMessage(*message);
-    getSubscribedLayers(*message, offers);
-    getAvailableLayers(*message);
+void VehicleHalManagerFuzzer::invokeGetSubscribedLayers(VmsMessageType /*type*/) {
+    int32_t intValue = mFuzzedDataProvider->ConsumeIntegral<int32_t>();
+    VmsOffers offers = {
+            intValue,
+            {VmsLayerOffering(VmsLayer(mFuzzedDataProvider->ConsumeIntegral<int32_t>(),
+                                       mFuzzedDataProvider->ConsumeIntegral<int32_t>(),
+                                       mFuzzedDataProvider->ConsumeIntegral<int32_t>()))}};
+    auto message = createBaseVmsMessage(
+            mFuzzedDataProvider->ConsumeIntegralInRange<size_t>(kMinSize, kMaxFileSize));
+    std::vector<int32_t> v;
+    size_t size = mFuzzedDataProvider->ConsumeIntegralInRange<size_t>(kMinSize, kMaxSize);
+    for (size_t i = 0; i < size; i++) {
+        v.push_back(mFuzzedDataProvider->ConsumeIntegralInRange<int32_t>(kMinSize, kMaxSize));
+    }
+
+    message->value.int32Values = hidl_vec<int32_t>(v);
+    if (!isValidVmsMessage(*message)) {
+        return;
+    }
+
+    if (mFuzzedDataProvider->ConsumeBool()) {
+        getSubscribedLayers(*message, offers);
+    } else {
+        getAvailableLayers(*message);
+    }
 }
 
 void VehicleHalManagerFuzzer::invokeVehiclePropStore() {
@@ -398,33 +503,49 @@
             .prop = vehicleProp,
             .access = VehiclePropertyAccess::READ,
             .changeMode = VehiclePropertyChangeMode::STATIC,
-            .areaConfigs = {VehicleAreaConfig{.areaId = (0)}},
+            .areaConfigs = {VehicleAreaConfig{
+                    .areaId = (mFuzzedDataProvider->ConsumeIntegral<int32_t>())}},
     };
-    store->registerProperty(config);
     VehiclePropValue propValue{};
     propValue.prop = vehicleProp;
-    propValue.areaId = 0;
-    store->writeValue(propValue, shouldWriteStatus);
-    store->readAllValues();
-    store->getAllConfigs();
-    store->getConfigOrNull(vehicleProp);
-    store->readValuesForProperty(vehicleProp);
-    store->readValueOrNull(propValue);
-    store->readValueOrNull(propValue.prop, propValue.areaId, 0);
-    store->removeValuesForProperty(vehicleProp);
-    store->removeValue(propValue);
-    store->getConfigOrDie(vehicleProp);
+    propValue.areaId = mFuzzedDataProvider->ConsumeIntegral<int32_t>();
+
+    auto invokeVehiclePropStoreAPI =
+            mFuzzedDataProvider->PickValueInArray<const std::function<void()>>({
+                    [&]() { store->registerProperty(config); },
+                    [&]() { store->writeValue(propValue, shouldWriteStatus); },
+                    [&]() { store->readAllValues(); },
+                    [&]() { store->getAllConfigs(); },
+                    [&]() { store->getConfigOrNull(vehicleProp); },
+                    [&]() { store->readValuesForProperty(vehicleProp); },
+                    [&]() { store->readValueOrNull(propValue); },
+                    [&]() {
+                        store->readValueOrNull(propValue.prop, propValue.areaId,
+                                               mFuzzedDataProvider->ConsumeIntegralInRange<int64_t>(
+                                                       kMinSize, kMaxFileSize));
+                    },
+                    [&]() { store->removeValuesForProperty(vehicleProp); },
+                    [&]() { store->removeValue(propValue); },
+                    [&]() {
+                        if (store->getConfigOrNull(vehicleProp)) {
+                            store->getConfigOrDie(vehicleProp);
+                        }
+                    },
+            });
+    invokeVehiclePropStoreAPI();
 }
 
 void VehicleHalManagerFuzzer::invokeWatchDogClient() {
-    auto service = new VehicleHalManager(mHal.get());
     sp<Looper> looper(Looper::prepare(/*opts=*/mFuzzedDataProvider->ConsumeBool()));
-    if (auto watchdogClient = ndk::SharedRefBase::make<WatchdogClient>(looper, service);
+    if (auto watchdogClient = ndk::SharedRefBase::make<WatchdogClient>(looper, mManager.get());
         watchdogClient->initialize()) {
-        watchdogClient->checkIfAlive(-1, TimeoutLength::TIMEOUT_NORMAL);
+        if (mFuzzedDataProvider->ConsumeBool()) {
+            watchdogClient->checkIfAlive(
+                    mFuzzedDataProvider->ConsumeIntegral<int32_t>(),
+                    (TimeoutLength)mFuzzedDataProvider->ConsumeIntegral<int32_t>());
+        }
         watchdogClient->prepareProcessTermination();
     }
-    delete service;
 }
 
 extern "C" int LLVMFuzzerTestOneInput(const uint8_t* data, size_t size) {
diff --git a/automotive/vehicle/2.0/default/tests/fuzzer/VehicleManager_fuzzer.h b/automotive/vehicle/2.0/default/tests/fuzzer/VehicleManager_fuzzer.h
index e9335d3..26ac11e 100644
--- a/automotive/vehicle/2.0/default/tests/fuzzer/VehicleManager_fuzzer.h
+++ b/automotive/vehicle/2.0/default/tests/fuzzer/VehicleManager_fuzzer.h
@@ -98,6 +98,13 @@
     }
     void process(const uint8_t* data, size_t size);
 
+    template <typename T>
+    void fillParameter(size_t size, std::vector<T>& data) {
+        for (size_t i = 0; i < size; ++i) {
+            data.push_back(mFuzzedDataProvider->ConsumeIntegral<T>());
+        }
+    }
+
   private:
     FuzzedDataProvider* mFuzzedDataProvider = nullptr;
     VehiclePropValue mActualValue = VehiclePropValue{};
@@ -108,6 +115,7 @@
     std::unique_ptr<VehicleHalManager> mManager;
 
     void invokeDebug();
+    void initValue();
     void invokePropConfigs();
     void invokeSubscribe();
     void invokeSetAndGetValues();
diff --git a/automotive/vehicle/aidl/impl/grpc/Android.bp b/automotive/vehicle/aidl/impl/grpc/Android.bp
index 06c9600..e5106f8 100644
--- a/automotive/vehicle/aidl/impl/grpc/Android.bp
+++ b/automotive/vehicle/aidl/impl/grpc/Android.bp
@@ -22,9 +22,11 @@
         "aprotoc",
         "protoc-gen-grpc-cpp-plugin",
     ],
-    cmd: "$(location aprotoc) -I$$(dirname $(in)) -Ihardware/interfaces/automotive/vehicle/aidl/impl/proto -Iexternal/protobuf/src --plugin=protoc-gen-grpc=$(location protoc-gen-grpc-cpp-plugin) $(in) --grpc_out=$(genDir) --cpp_out=$(genDir)",
+    cmd: "$(location aprotoc) -I$$(dirname $(location proto/VehicleServer.proto)) -Ihardware/interfaces/automotive/vehicle/aidl/impl/proto -Iexternal/protobuf/src --plugin=protoc-gen-grpc=$(location protoc-gen-grpc-cpp-plugin) $(location proto/VehicleServer.proto) --grpc_out=$(genDir) --cpp_out=$(genDir)",
     srcs: [
         "proto/VehicleServer.proto",
+        ":libprotobuf-internal-protos",
+        ":VehicleHalProtoFiles",
     ],
     out: [
         "VehicleServer.pb.h",
@@ -39,9 +41,11 @@
         "aprotoc",
         "protoc-gen-grpc-cpp-plugin",
     ],
-    cmd: "$(location aprotoc) -I$$(dirname $(in)) -Ihardware/interfaces/automotive/vehicle/aidl/impl/proto -Iexternal/protobuf/src --plugin=protoc-gen-grpc=$(location protoc-gen-grpc-cpp-plugin) $(in) --grpc_out=$(genDir) --cpp_out=$(genDir)",
+    cmd: "$(location aprotoc) -I$$(dirname $(location proto/VehicleServer.proto)) -Ihardware/interfaces/automotive/vehicle/aidl/impl/proto -Iexternal/protobuf/src --plugin=protoc-gen-grpc=$(location protoc-gen-grpc-cpp-plugin) $(location proto/VehicleServer.proto) --grpc_out=$(genDir) --cpp_out=$(genDir)",
     srcs: [
         "proto/VehicleServer.proto",
+        ":libprotobuf-internal-protos",
+        ":VehicleHalProtoFiles",
     ],
     out: [
         "VehicleServer.pb.cc",
diff --git a/bluetooth/aidl/default/BluetoothHci.cpp b/bluetooth/aidl/default/BluetoothHci.cpp
index 9862e9e..a247cb0 100644
--- a/bluetooth/aidl/default/BluetoothHci.cpp
+++ b/bluetooth/aidl/default/BluetoothHci.cpp
@@ -320,6 +320,7 @@
   {
     std::lock_guard<std::mutex> guard(mStateMutex);
     mState = HalState::READY;
+    mH4 = nullptr;
   }
   return ndk::ScopedAStatus::ok();
 }
@@ -346,13 +347,16 @@
 
 ndk::ScopedAStatus BluetoothHci::send(PacketType type,
     const std::vector<uint8_t>& v) {
-  if (mH4 == nullptr) {
-    return ndk::ScopedAStatus::fromExceptionCode(EX_ILLEGAL_STATE);
-  }
   if (v.empty()) {
     ALOGE("Packet is empty, no data was found to be sent");
     return ndk::ScopedAStatus::fromExceptionCode(EX_ILLEGAL_ARGUMENT);
   }
+
+  std::lock_guard<std::mutex> guard(mStateMutex);
+  if (mH4 == nullptr) {
+    return ndk::ScopedAStatus::fromExceptionCode(EX_ILLEGAL_STATE);
+  }
+
   mH4->Send(type, v);
   return ndk::ScopedAStatus::ok();
 }
diff --git a/bluetooth/audio/aidl/aidl_api/android.hardware.bluetooth.audio/current/android/hardware/bluetooth/audio/AacObjectType.aidl b/bluetooth/audio/aidl/aidl_api/android.hardware.bluetooth.audio/current/android/hardware/bluetooth/audio/AacObjectType.aidl
index 2148244..418dd7a 100644
--- a/bluetooth/audio/aidl/aidl_api/android.hardware.bluetooth.audio/current/android/hardware/bluetooth/audio/AacObjectType.aidl
+++ b/bluetooth/audio/aidl/aidl_api/android.hardware.bluetooth.audio/current/android/hardware/bluetooth/audio/AacObjectType.aidl
@@ -34,8 +34,8 @@
 package android.hardware.bluetooth.audio;
 @Backing(type="byte") @VintfStability
 enum AacObjectType {
-  MPEG2_LC = 0,
-  MPEG4_LC = 1,
-  MPEG4_LTP = 2,
-  MPEG4_SCALABLE = 3,
+  MPEG2_LC,
+  MPEG4_LC,
+  MPEG4_LTP,
+  MPEG4_SCALABLE,
 }
diff --git a/bluetooth/audio/aidl/aidl_api/android.hardware.bluetooth.audio/current/android/hardware/bluetooth/audio/AptxAdaptiveChannelMode.aidl b/bluetooth/audio/aidl/aidl_api/android.hardware.bluetooth.audio/current/android/hardware/bluetooth/audio/AptxAdaptiveChannelMode.aidl
index 0499b70..675f9f2 100644
--- a/bluetooth/audio/aidl/aidl_api/android.hardware.bluetooth.audio/current/android/hardware/bluetooth/audio/AptxAdaptiveChannelMode.aidl
+++ b/bluetooth/audio/aidl/aidl_api/android.hardware.bluetooth.audio/current/android/hardware/bluetooth/audio/AptxAdaptiveChannelMode.aidl
@@ -38,5 +38,5 @@
   MONO = 1,
   DUAL_MONO = 2,
   TWS_STEREO = 4,
-  UNKNOWN = 255,
+  UNKNOWN = 0xFF,
 }
diff --git a/bluetooth/audio/aidl/aidl_api/android.hardware.bluetooth.audio/current/android/hardware/bluetooth/audio/AptxAdaptiveInputMode.aidl b/bluetooth/audio/aidl/aidl_api/android.hardware.bluetooth.audio/current/android/hardware/bluetooth/audio/AptxAdaptiveInputMode.aidl
index f702939..a18303e 100644
--- a/bluetooth/audio/aidl/aidl_api/android.hardware.bluetooth.audio/current/android/hardware/bluetooth/audio/AptxAdaptiveInputMode.aidl
+++ b/bluetooth/audio/aidl/aidl_api/android.hardware.bluetooth.audio/current/android/hardware/bluetooth/audio/AptxAdaptiveInputMode.aidl
@@ -34,6 +34,6 @@
 package android.hardware.bluetooth.audio;
 @Backing(type="int") @VintfStability
 enum AptxAdaptiveInputMode {
-  STEREO = 0,
-  DUAL_MONO = 1,
+  STEREO = 0x00,
+  DUAL_MONO = 0x01,
 }
diff --git a/bluetooth/audio/aidl/aidl_api/android.hardware.bluetooth.audio/current/android/hardware/bluetooth/audio/AptxMode.aidl b/bluetooth/audio/aidl/aidl_api/android.hardware.bluetooth.audio/current/android/hardware/bluetooth/audio/AptxMode.aidl
index d5dd9d9..dd8cf08 100644
--- a/bluetooth/audio/aidl/aidl_api/android.hardware.bluetooth.audio/current/android/hardware/bluetooth/audio/AptxMode.aidl
+++ b/bluetooth/audio/aidl/aidl_api/android.hardware.bluetooth.audio/current/android/hardware/bluetooth/audio/AptxMode.aidl
@@ -34,8 +34,8 @@
 package android.hardware.bluetooth.audio;
 @Backing(type="int") @VintfStability
 enum AptxMode {
-  UNKNOWN = 0,
-  HIGH_QUALITY = 4096,
-  LOW_LATENCY = 8192,
-  ULTRA_LOW_LATENCY = 16384,
+  UNKNOWN = 0x00,
+  HIGH_QUALITY = 0x1000,
+  LOW_LATENCY = 0x2000,
+  ULTRA_LOW_LATENCY = 0x4000,
 }
diff --git a/bluetooth/audio/aidl/aidl_api/android.hardware.bluetooth.audio/current/android/hardware/bluetooth/audio/AudioLocation.aidl b/bluetooth/audio/aidl/aidl_api/android.hardware.bluetooth.audio/current/android/hardware/bluetooth/audio/AudioLocation.aidl
index 319a5e2..941344c 100644
--- a/bluetooth/audio/aidl/aidl_api/android.hardware.bluetooth.audio/current/android/hardware/bluetooth/audio/AudioLocation.aidl
+++ b/bluetooth/audio/aidl/aidl_api/android.hardware.bluetooth.audio/current/android/hardware/bluetooth/audio/AudioLocation.aidl
@@ -35,6 +35,6 @@
 @Backing(type="int") @VintfStability
 enum AudioLocation {
   UNKNOWN = 1,
-  FRONT_LEFT = 2,
-  FRONT_RIGHT = 4,
+  FRONT_LEFT = (1 << 1) /* 2 */,
+  FRONT_RIGHT = (1 << 2) /* 4 */,
 }
diff --git a/bluetooth/audio/aidl/aidl_api/android.hardware.bluetooth.audio/current/android/hardware/bluetooth/audio/ChannelMode.aidl b/bluetooth/audio/aidl/aidl_api/android.hardware.bluetooth.audio/current/android/hardware/bluetooth/audio/ChannelMode.aidl
index feacb80..2bb5cd8 100644
--- a/bluetooth/audio/aidl/aidl_api/android.hardware.bluetooth.audio/current/android/hardware/bluetooth/audio/ChannelMode.aidl
+++ b/bluetooth/audio/aidl/aidl_api/android.hardware.bluetooth.audio/current/android/hardware/bluetooth/audio/ChannelMode.aidl
@@ -34,8 +34,8 @@
 package android.hardware.bluetooth.audio;
 @Backing(type="byte") @VintfStability
 enum ChannelMode {
-  UNKNOWN = 0,
-  MONO = 1,
-  STEREO = 2,
-  DUALMONO = 3,
+  UNKNOWN,
+  MONO,
+  STEREO,
+  DUALMONO,
 }
diff --git a/bluetooth/audio/aidl/aidl_api/android.hardware.bluetooth.audio/current/android/hardware/bluetooth/audio/CodecType.aidl b/bluetooth/audio/aidl/aidl_api/android.hardware.bluetooth.audio/current/android/hardware/bluetooth/audio/CodecType.aidl
index 3e204f9..d4f205e 100644
--- a/bluetooth/audio/aidl/aidl_api/android.hardware.bluetooth.audio/current/android/hardware/bluetooth/audio/CodecType.aidl
+++ b/bluetooth/audio/aidl/aidl_api/android.hardware.bluetooth.audio/current/android/hardware/bluetooth/audio/CodecType.aidl
@@ -34,16 +34,16 @@
 package android.hardware.bluetooth.audio;
 @Backing(type="int") @VintfStability
 enum CodecType {
-  UNKNOWN = 0,
-  SBC = 1,
-  AAC = 2,
-  APTX = 3,
-  APTX_HD = 4,
-  LDAC = 5,
-  LC3 = 6,
-  VENDOR = 7,
-  APTX_ADAPTIVE = 8,
-  OPUS = 9,
-  APTX_ADAPTIVE_LE = 10,
-  APTX_ADAPTIVE_LEX = 11,
+  UNKNOWN,
+  SBC,
+  AAC,
+  APTX,
+  APTX_HD,
+  LDAC,
+  LC3,
+  VENDOR,
+  APTX_ADAPTIVE,
+  OPUS,
+  APTX_ADAPTIVE_LE,
+  APTX_ADAPTIVE_LEX,
 }
diff --git a/bluetooth/audio/aidl/aidl_api/android.hardware.bluetooth.audio/current/android/hardware/bluetooth/audio/LdacChannelMode.aidl b/bluetooth/audio/aidl/aidl_api/android.hardware.bluetooth.audio/current/android/hardware/bluetooth/audio/LdacChannelMode.aidl
index 88d6faf..3d80c4b 100644
--- a/bluetooth/audio/aidl/aidl_api/android.hardware.bluetooth.audio/current/android/hardware/bluetooth/audio/LdacChannelMode.aidl
+++ b/bluetooth/audio/aidl/aidl_api/android.hardware.bluetooth.audio/current/android/hardware/bluetooth/audio/LdacChannelMode.aidl
@@ -34,8 +34,8 @@
 package android.hardware.bluetooth.audio;
 @Backing(type="byte") @VintfStability
 enum LdacChannelMode {
-  UNKNOWN = 0,
-  STEREO = 1,
-  DUAL = 2,
-  MONO = 3,
+  UNKNOWN,
+  STEREO,
+  DUAL,
+  MONO,
 }
diff --git a/bluetooth/audio/aidl/aidl_api/android.hardware.bluetooth.audio/current/android/hardware/bluetooth/audio/LdacQualityIndex.aidl b/bluetooth/audio/aidl/aidl_api/android.hardware.bluetooth.audio/current/android/hardware/bluetooth/audio/LdacQualityIndex.aidl
index 35e4358..a332dc5 100644
--- a/bluetooth/audio/aidl/aidl_api/android.hardware.bluetooth.audio/current/android/hardware/bluetooth/audio/LdacQualityIndex.aidl
+++ b/bluetooth/audio/aidl/aidl_api/android.hardware.bluetooth.audio/current/android/hardware/bluetooth/audio/LdacQualityIndex.aidl
@@ -34,8 +34,8 @@
 package android.hardware.bluetooth.audio;
 @Backing(type="byte") @VintfStability
 enum LdacQualityIndex {
-  HIGH = 0,
-  MID = 1,
-  LOW = 2,
-  ABR = 3,
+  HIGH,
+  MID,
+  LOW,
+  ABR,
 }
diff --git a/bluetooth/audio/aidl/aidl_api/android.hardware.bluetooth.audio/current/android/hardware/bluetooth/audio/SbcAllocMethod.aidl b/bluetooth/audio/aidl/aidl_api/android.hardware.bluetooth.audio/current/android/hardware/bluetooth/audio/SbcAllocMethod.aidl
index 091f6d7..9cf65d5 100644
--- a/bluetooth/audio/aidl/aidl_api/android.hardware.bluetooth.audio/current/android/hardware/bluetooth/audio/SbcAllocMethod.aidl
+++ b/bluetooth/audio/aidl/aidl_api/android.hardware.bluetooth.audio/current/android/hardware/bluetooth/audio/SbcAllocMethod.aidl
@@ -34,6 +34,6 @@
 package android.hardware.bluetooth.audio;
 @Backing(type="byte") @VintfStability
 enum SbcAllocMethod {
-  ALLOC_MD_S = 0,
-  ALLOC_MD_L = 1,
+  ALLOC_MD_S,
+  ALLOC_MD_L,
 }
diff --git a/bluetooth/audio/aidl/aidl_api/android.hardware.bluetooth.audio/current/android/hardware/bluetooth/audio/SbcChannelMode.aidl b/bluetooth/audio/aidl/aidl_api/android.hardware.bluetooth.audio/current/android/hardware/bluetooth/audio/SbcChannelMode.aidl
index 6441a99..7779aa0 100644
--- a/bluetooth/audio/aidl/aidl_api/android.hardware.bluetooth.audio/current/android/hardware/bluetooth/audio/SbcChannelMode.aidl
+++ b/bluetooth/audio/aidl/aidl_api/android.hardware.bluetooth.audio/current/android/hardware/bluetooth/audio/SbcChannelMode.aidl
@@ -34,9 +34,9 @@
 package android.hardware.bluetooth.audio;
 @Backing(type="byte") @VintfStability
 enum SbcChannelMode {
-  UNKNOWN = 0,
-  JOINT_STEREO = 1,
-  STEREO = 2,
-  DUAL = 3,
-  MONO = 4,
+  UNKNOWN,
+  JOINT_STEREO,
+  STEREO,
+  DUAL,
+  MONO,
 }
diff --git a/bluetooth/audio/aidl/aidl_api/android.hardware.bluetooth.audio/current/android/hardware/bluetooth/audio/SessionType.aidl b/bluetooth/audio/aidl/aidl_api/android.hardware.bluetooth.audio/current/android/hardware/bluetooth/audio/SessionType.aidl
index 33a3187..4b2c10f 100644
--- a/bluetooth/audio/aidl/aidl_api/android.hardware.bluetooth.audio/current/android/hardware/bluetooth/audio/SessionType.aidl
+++ b/bluetooth/audio/aidl/aidl_api/android.hardware.bluetooth.audio/current/android/hardware/bluetooth/audio/SessionType.aidl
@@ -34,16 +34,16 @@
 package android.hardware.bluetooth.audio;
 @Backing(type="byte") @VintfStability
 enum SessionType {
-  UNKNOWN = 0,
-  A2DP_SOFTWARE_ENCODING_DATAPATH = 1,
-  A2DP_HARDWARE_OFFLOAD_ENCODING_DATAPATH = 2,
-  HEARING_AID_SOFTWARE_ENCODING_DATAPATH = 3,
-  LE_AUDIO_SOFTWARE_ENCODING_DATAPATH = 4,
-  LE_AUDIO_SOFTWARE_DECODING_DATAPATH = 5,
-  LE_AUDIO_HARDWARE_OFFLOAD_ENCODING_DATAPATH = 6,
-  LE_AUDIO_HARDWARE_OFFLOAD_DECODING_DATAPATH = 7,
-  LE_AUDIO_BROADCAST_SOFTWARE_ENCODING_DATAPATH = 8,
-  LE_AUDIO_BROADCAST_HARDWARE_OFFLOAD_ENCODING_DATAPATH = 9,
-  A2DP_SOFTWARE_DECODING_DATAPATH = 10,
-  A2DP_HARDWARE_OFFLOAD_DECODING_DATAPATH = 11,
+  UNKNOWN,
+  A2DP_SOFTWARE_ENCODING_DATAPATH,
+  A2DP_HARDWARE_OFFLOAD_ENCODING_DATAPATH,
+  HEARING_AID_SOFTWARE_ENCODING_DATAPATH,
+  LE_AUDIO_SOFTWARE_ENCODING_DATAPATH,
+  LE_AUDIO_SOFTWARE_DECODING_DATAPATH,
+  LE_AUDIO_HARDWARE_OFFLOAD_ENCODING_DATAPATH,
+  LE_AUDIO_HARDWARE_OFFLOAD_DECODING_DATAPATH,
+  LE_AUDIO_BROADCAST_SOFTWARE_ENCODING_DATAPATH,
+  LE_AUDIO_BROADCAST_HARDWARE_OFFLOAD_ENCODING_DATAPATH,
+  A2DP_SOFTWARE_DECODING_DATAPATH,
+  A2DP_HARDWARE_OFFLOAD_DECODING_DATAPATH,
 }
diff --git a/bluetooth/audio/utils/aidl_session/BluetoothAudioSession.cpp b/bluetooth/audio/utils/aidl_session/BluetoothAudioSession.cpp
index 0bcafa3..c283148 100644
--- a/bluetooth/audio/utils/aidl_session/BluetoothAudioSession.cpp
+++ b/bluetooth/audio/utils/aidl_session/BluetoothAudioSession.cpp
@@ -439,6 +439,9 @@
 }
 
 void BluetoothAudioSession::ReportLowLatencyModeAllowedChanged(bool allowed) {
+  if (session_type_ != SessionType::A2DP_HARDWARE_OFFLOAD_ENCODING_DATAPATH) {
+    return;
+  }
   std::lock_guard<std::recursive_mutex> guard(mutex_);
   low_latency_allowed_ = allowed;
   // TODO(b/294498919): Remove this after there is API to update latency mode
@@ -588,15 +591,32 @@
                << " has NO session";
     return std::vector<LatencyMode>();
   }
-  if (low_latency_allowed_) return latency_modes_;
-  std::vector<LatencyMode> modes;
-  for (LatencyMode mode : latency_modes_) {
-    if (mode == LatencyMode::LOW_LATENCY)
-      // ignore those low latency mode if Bluetooth stack doesn't allow
-      continue;
-    modes.push_back(mode);
+
+  std::vector<LatencyMode> supported_latency_modes;
+  if (session_type_ ==
+      SessionType::LE_AUDIO_HARDWARE_OFFLOAD_ENCODING_DATAPATH) {
+    for (LatencyMode mode : latency_modes_) {
+      if (mode == LatencyMode::LOW_LATENCY) {
+        // LOW_LATENCY is not supported for LE_HARDWARE_OFFLOAD_ENC sessions
+        continue;
+      }
+      supported_latency_modes.push_back(mode);
+    }
+  } else {
+    for (LatencyMode mode : latency_modes_) {
+      if (!low_latency_allowed_ && mode == LatencyMode::LOW_LATENCY) {
+        // ignore LOW_LATENCY mode if Bluetooth stack doesn't allow
+        continue;
+      }
+      if (mode == LatencyMode::DYNAMIC_SPATIAL_AUDIO_SOFTWARE ||
+          mode == LatencyMode::DYNAMIC_SPATIAL_AUDIO_HARDWARE) {
+        // DSA_SW and DSA_HW only supported for LE_HARDWARE_OFFLOAD_ENC sessions
+        continue;
+      }
+      supported_latency_modes.push_back(mode);
+    }
   }
-  return modes;
+  return supported_latency_modes;
 }
 
 void BluetoothAudioSession::SetLatencyMode(const LatencyMode& latency_mode) {
diff --git a/bluetooth/finder/aidl/Android.bp b/bluetooth/finder/aidl/Android.bp
new file mode 100644
index 0000000..e606d2d
--- /dev/null
+++ b/bluetooth/finder/aidl/Android.bp
@@ -0,0 +1,34 @@
+// Copyright (C) 2023 The Android Open Source Project
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//     http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+package {
+    default_applicable_licenses: ["Android-Apache-2.0"],
+}
+
+aidl_interface {
+    name: "android.hardware.bluetooth.finder",
+    vendor_available: true,
+    srcs: ["android/hardware/bluetooth/finder/*.aidl"],
+    stability: "vintf",
+
+    backend: {
+        ndk: {
+            enabled: true,
+        },
+        java: {
+            enabled: true,
+            platform_apis: true,
+        },
+    },
+}
diff --git a/bluetooth/finder/aidl/aidl_api/android.hardware.bluetooth.finder/current/android/hardware/bluetooth/finder/Eid.aidl b/bluetooth/finder/aidl/aidl_api/android.hardware.bluetooth.finder/current/android/hardware/bluetooth/finder/Eid.aidl
new file mode 100644
index 0000000..42461c5
--- /dev/null
+++ b/bluetooth/finder/aidl/aidl_api/android.hardware.bluetooth.finder/current/android/hardware/bluetooth/finder/Eid.aidl
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2023 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.bluetooth.finder;
+@VintfStability
+parcelable Eid {
+  byte[20] bytes;
+}
diff --git a/bluetooth/finder/aidl/aidl_api/android.hardware.bluetooth.finder/current/android/hardware/bluetooth/finder/IBluetoothFinder.aidl b/bluetooth/finder/aidl/aidl_api/android.hardware.bluetooth.finder/current/android/hardware/bluetooth/finder/IBluetoothFinder.aidl
new file mode 100644
index 0000000..4bc9041
--- /dev/null
+++ b/bluetooth/finder/aidl/aidl_api/android.hardware.bluetooth.finder/current/android/hardware/bluetooth/finder/IBluetoothFinder.aidl
@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) 2023 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.bluetooth.finder;
+@VintfStability
+interface IBluetoothFinder {
+  void sendEids(in android.hardware.bluetooth.finder.Eid[] eids);
+  void setPoweredOffFinderMode(in boolean enable);
+  boolean getPoweredOffFinderMode();
+}
diff --git a/bluetooth/finder/aidl/android/hardware/bluetooth/finder/Eid.aidl b/bluetooth/finder/aidl/android/hardware/bluetooth/finder/Eid.aidl
new file mode 100644
index 0000000..ae9b159
--- /dev/null
+++ b/bluetooth/finder/aidl/android/hardware/bluetooth/finder/Eid.aidl
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2023 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.bluetooth.finder;
+
+/**
+ * Ephemeral Identifier
+ */
+@VintfStability
+parcelable Eid {
+    byte[20] bytes;
+}
diff --git a/bluetooth/finder/aidl/android/hardware/bluetooth/finder/IBluetoothFinder.aidl b/bluetooth/finder/aidl/android/hardware/bluetooth/finder/IBluetoothFinder.aidl
new file mode 100644
index 0000000..615739b
--- /dev/null
+++ b/bluetooth/finder/aidl/android/hardware/bluetooth/finder/IBluetoothFinder.aidl
@@ -0,0 +1,46 @@
+/*
+ * Copyright (C) 2023 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.bluetooth.finder;
+
+import android.hardware.bluetooth.finder.Eid;
+
+@VintfStability
+interface IBluetoothFinder {
+    /**
+     * API to set the EIDs to the Bluetooth Controller
+     *
+     * @param eids array of 20 bytes EID to the Bluetooth
+     * controller
+     */
+    void sendEids(in Eid[] eids);
+
+    /**
+     * API to enable the powered-off finder feature, which allows the Bluetooth controller to send
+     * beacons after the device is powered off.
+     *
+     * @param enable true to enable; false to disable
+     */
+    void setPoweredOffFinderMode(in boolean enable);
+
+    /**
+     * API for retrieving feature enablement status
+     *
+     * @return the value last set by setPoweredOffFinderMode, false if setPoweredOffFinderMode was
+     *         never been invoked since boot.
+     */
+    boolean getPoweredOffFinderMode();
+}
diff --git a/bluetooth/finder/aidl/default/Android.bp b/bluetooth/finder/aidl/default/Android.bp
new file mode 100644
index 0000000..b364ae1
--- /dev/null
+++ b/bluetooth/finder/aidl/default/Android.bp
@@ -0,0 +1,42 @@
+// Copyright (C) 2023 The Android Open Source Project
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//     http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+package {
+    default_applicable_licenses: ["Android-Apache-2.0"],
+}
+
+cc_binary {
+    name: "android.hardware.bluetooth.finder-service.default",
+    relative_install_path: "hw",
+    init_rc: ["bluetooth-finder-service-default.rc"],
+    vintf_fragments: [":manifest_android.hardware.bluetooth.finder-service.default.xml"],
+    vendor: true,
+    srcs: [
+        "BluetoothFinder.cpp",
+        "service.cpp",
+    ],
+    shared_libs: [
+        "android.hardware.bluetooth.finder-V1-ndk",
+        "libbase",
+        "libbinder_ndk",
+        "libhidlbase",
+        "libutils",
+        "liblog",
+    ],
+}
+
+filegroup {
+    name: "manifest_android.hardware.bluetooth.finder-service.default.xml",
+    srcs: ["bluetooth-finder-service-default.xml"],
+}
diff --git a/bluetooth/finder/aidl/default/BluetoothFinder.cpp b/bluetooth/finder/aidl/default/BluetoothFinder.cpp
new file mode 100644
index 0000000..236a1f8
--- /dev/null
+++ b/bluetooth/finder/aidl/default/BluetoothFinder.cpp
@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) 2023 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "BluetoothFinder.h"
+
+namespace aidl::android::hardware::bluetooth::finder::impl {
+
+::ndk::ScopedAStatus BluetoothFinder::sendEids(const ::std::vector<Eid>& keys) {
+  keys_.insert(keys_.end(), keys.begin(), keys.end());
+  return ::ndk::ScopedAStatus::ok();
+}
+
+::ndk::ScopedAStatus BluetoothFinder::setPoweredOffFinderMode(bool enable) {
+  pof_enabled_ = enable;
+  return ::ndk::ScopedAStatus::ok();
+}
+
+::ndk::ScopedAStatus BluetoothFinder::getPoweredOffFinderMode(
+    bool* _aidl_return) {
+  *_aidl_return = pof_enabled_;
+  return ::ndk::ScopedAStatus::ok();
+}
+
+}  // namespace aidl::android::hardware::bluetooth::finder::impl
diff --git a/bluetooth/finder/aidl/default/BluetoothFinder.h b/bluetooth/finder/aidl/default/BluetoothFinder.h
new file mode 100644
index 0000000..16110f6
--- /dev/null
+++ b/bluetooth/finder/aidl/default/BluetoothFinder.h
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2023 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <aidl/android/hardware/bluetooth/finder/BnBluetoothFinder.h>
+
+#include <vector>
+
+namespace aidl::android::hardware::bluetooth::finder::impl {
+
+using ::aidl::android::hardware::bluetooth::finder::BnBluetoothFinder;
+using ::aidl::android::hardware::bluetooth::finder::Eid;
+
+class BluetoothFinder : public BnBluetoothFinder {
+ public:
+  BluetoothFinder() = default;
+
+  ::ndk::ScopedAStatus sendEids(const ::std::vector<Eid>& keys) override;
+  ::ndk::ScopedAStatus setPoweredOffFinderMode(bool enable) override;
+  ::ndk::ScopedAStatus getPoweredOffFinderMode(bool* _aidl_return) override;
+
+ private:
+  bool pof_enabled_;
+  std::vector<Eid> keys_;
+};
+
+}  // namespace aidl::android::hardware::bluetooth::finder::impl
diff --git a/bluetooth/finder/aidl/default/bluetooth-finder-service-default.rc b/bluetooth/finder/aidl/default/bluetooth-finder-service-default.rc
new file mode 100644
index 0000000..fea07f0
--- /dev/null
+++ b/bluetooth/finder/aidl/default/bluetooth-finder-service-default.rc
@@ -0,0 +1,6 @@
+service vendor.bluetooth.finder-default /vendor/bin/hw/android.hardware.bluetooth.finder.default
+    class hal
+    capabilities BLOCK_SUSPEND NET_ADMIN SYS_NICE
+    user bluetooth
+    group bluetooth
+    task_profiles ServicePerformance
diff --git a/bluetooth/finder/aidl/default/bluetooth-finder-service-default.xml b/bluetooth/finder/aidl/default/bluetooth-finder-service-default.xml
new file mode 100644
index 0000000..be7c00d
--- /dev/null
+++ b/bluetooth/finder/aidl/default/bluetooth-finder-service-default.xml
@@ -0,0 +1,7 @@
+<manifest version="1.0" type="device">
+    <hal format="aidl">
+        <name>android.hardware.bluetooth.finder</name>
+        <version>1</version>
+        <fqname>IBluetoothFinder/default</fqname>
+    </hal>
+</manifest>
diff --git a/bluetooth/finder/aidl/default/service.cpp b/bluetooth/finder/aidl/default/service.cpp
new file mode 100644
index 0000000..a117df8
--- /dev/null
+++ b/bluetooth/finder/aidl/default/service.cpp
@@ -0,0 +1,46 @@
+/*
+ * Copyright (C) 2023 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#define LOG_TAG "aidl.android.hardware.bluetooth.finder.default"
+
+#include <android/binder_manager.h>
+#include <android/binder_process.h>
+#include <utils/Log.h>
+
+#include "BluetoothFinder.h"
+
+using ::aidl::android::hardware::bluetooth::finder::impl::BluetoothFinder;
+
+int main(int /* argc */, char** /* argv */) {
+  ALOGI("Bluetooth Finder HAL registering");
+  if (!ABinderProcess_setThreadPoolMaxThreadCount(0)) {
+    ALOGE("failed to set thread pool max thread count");
+    return 1;
+  }
+
+  std::shared_ptr<BluetoothFinder> service =
+      ndk::SharedRefBase::make<BluetoothFinder>();
+  std::string instance =
+      std::string() + BluetoothFinder::descriptor + "/default";
+  auto result =
+      AServiceManager_addService(service->asBinder().get(), instance.c_str());
+  if (result == STATUS_OK) {
+    ABinderProcess_joinThreadPool();
+  } else {
+    ALOGE("Could not register as a service!");
+  }
+  return 0;
+}
diff --git a/bluetooth/finder/aidl/vts/Android.bp b/bluetooth/finder/aidl/vts/Android.bp
new file mode 100644
index 0000000..6b0285e
--- /dev/null
+++ b/bluetooth/finder/aidl/vts/Android.bp
@@ -0,0 +1,41 @@
+// Copyright (C) 2023 The Android Open Source Project
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//     http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+package {
+    default_applicable_licenses: ["hardware_interfaces_license"],
+}
+
+cc_test {
+    name: "VtsHalBluetoothFinderTargetTest",
+    defaults: [
+        "use_libaidlvintf_gtest_helper_static",
+    ],
+    srcs: ["VtsHalBluetoothFinderTargetTest.cpp"],
+    shared_libs: [
+        "libbase",
+        "libcutils",
+        "libbinder_ndk",
+        "liblog",
+        "libutils",
+    ],
+    static_libs: [
+        "android.hardware.bluetooth.finder-V1-ndk",
+        "libbluetooth-types",
+    ],
+    test_config: "VtsHalBluetoothFinderTargetTest.xml",
+    test_suites: [
+        "general-tests",
+        "vts",
+    ],
+}
diff --git a/bluetooth/finder/aidl/vts/VtsHalBluetoothFinderTargetTest.cpp b/bluetooth/finder/aidl/vts/VtsHalBluetoothFinderTargetTest.cpp
new file mode 100644
index 0000000..be07a7d
--- /dev/null
+++ b/bluetooth/finder/aidl/vts/VtsHalBluetoothFinderTargetTest.cpp
@@ -0,0 +1,114 @@
+/*
+ * Copyright (C) 2023 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <aidl/Gtest.h>
+#include <aidl/Vintf.h>
+#include <aidl/android/hardware/bluetooth/finder/IBluetoothFinder.h>
+#include <android-base/logging.h>
+#include <android/binder_manager.h>
+#include <android/binder_process.h>
+#include <binder/IServiceManager.h>
+#include <utils/Log.h>
+
+#include <array>
+#include <vector>
+
+using ::aidl::android::hardware::bluetooth::finder::Eid;
+using ::aidl::android::hardware::bluetooth::finder::IBluetoothFinder;
+using ::ndk::ScopedAStatus;
+
+class BluetoothFinderTest : public ::testing::TestWithParam<std::string> {
+ public:
+  virtual void SetUp() override {
+    ALOGI("SetUp Finder Test");
+    bluetooth_finder = IBluetoothFinder::fromBinder(
+        ndk::SpAIBinder(AServiceManager_waitForService(GetParam().c_str())));
+    ASSERT_NE(bluetooth_finder, nullptr);
+  }
+
+  virtual void TearDown() override {
+    ALOGI("TearDown Finder Test");
+    bluetooth_finder = nullptr;
+    ASSERT_EQ(bluetooth_finder, nullptr);
+  }
+
+  ScopedAStatus sendEids(uint8_t num);
+  ScopedAStatus setPoweredOffFinderMode(bool enable);
+  ScopedAStatus getPoweredOffFinderMode(bool* status);
+
+ private:
+  std::shared_ptr<IBluetoothFinder> bluetooth_finder;
+};
+
+ScopedAStatus BluetoothFinderTest::sendEids(uint8_t numKeys) {
+  std::vector<Eid> keys(numKeys);
+  for (uint_t i = 0; i < numKeys; i++) {
+    std::array<uint8_t, 20> key;
+    key.fill(i + 1);
+    keys[i].bytes = key;
+  }
+  return bluetooth_finder->sendEids(keys);
+}
+
+ScopedAStatus BluetoothFinderTest::setPoweredOffFinderMode(bool enable) {
+  return bluetooth_finder->setPoweredOffFinderMode(enable);
+}
+
+ScopedAStatus BluetoothFinderTest::getPoweredOffFinderMode(bool* status) {
+  return bluetooth_finder->getPoweredOffFinderMode(status);
+}
+
+TEST_P(BluetoothFinderTest, SendEidsSingle) {
+  ScopedAStatus status = sendEids(1);
+  ASSERT_TRUE(status.isOk());
+}
+
+TEST_P(BluetoothFinderTest, Send255Eids) {
+  ScopedAStatus status = sendEids(255);
+  ASSERT_TRUE(status.isOk());
+}
+
+TEST_P(BluetoothFinderTest, setAndGetPoweredOffFinderModeEnable) {
+  ScopedAStatus status = setPoweredOffFinderMode(true);
+  ASSERT_TRUE(status.isOk());
+  bool pof_status;
+  status = getPoweredOffFinderMode(&pof_status);
+  ASSERT_TRUE(status.isOk());
+  ASSERT_TRUE(pof_status);
+}
+
+TEST_P(BluetoothFinderTest, setAndGetPoweredOffFinderModeDisable) {
+  ScopedAStatus status = setPoweredOffFinderMode(false);
+  ASSERT_TRUE(status.isOk());
+  bool pof_status;
+  status = getPoweredOffFinderMode(&pof_status);
+  ASSERT_TRUE(status.isOk());
+  ASSERT_TRUE(!pof_status);
+}
+
+GTEST_ALLOW_UNINSTANTIATED_PARAMETERIZED_TEST(BluetoothFinderTest);
+INSTANTIATE_TEST_SUITE_P(PerInstance, BluetoothFinderTest,
+                         testing::ValuesIn(android::getAidlHalInstanceNames(
+                             IBluetoothFinder::descriptor)),
+                         android::PrintInstanceNameToString);
+
+int main(int argc, char** argv) {
+  ::testing::InitGoogleTest(&argc, argv);
+  ABinderProcess_startThreadPool();
+  int status = RUN_ALL_TESTS();
+  ALOGI("Test result = %d", status);
+  return status;
+}
diff --git a/bluetooth/finder/aidl/vts/VtsHalBluetoothFinderTargetTest.xml b/bluetooth/finder/aidl/vts/VtsHalBluetoothFinderTargetTest.xml
new file mode 100644
index 0000000..46053dd
--- /dev/null
+++ b/bluetooth/finder/aidl/vts/VtsHalBluetoothFinderTargetTest.xml
@@ -0,0 +1,33 @@
+<!--
+  Copyright (C) 2023 The Android Open Source Project
+
+  Licensed under the Apache License, Version 2.0 (the "License");
+  you may not use this file except in compliance with the License.
+  You may obtain a copy of the License at
+
+      http://www.apache.org/licenses/LICENSE-2.0
+
+  Unless required by applicable law or agreed to in writing, software
+  distributed under the License is distributed on an "AS IS" BASIS,
+  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  See the License for the specific language governing permissions and
+  limitations under the License.
+-->
+
+<configuration description="Runs VtsHalBluetoothFinderTargetTest.">
+    <option name="test-suite-tag" value="apct" />
+    <option name="test-suite-tag" value="apct-native" />
+
+    <target_preparer class="com.android.tradefed.targetprep.RootTargetPreparer">
+    </target_preparer>
+
+    <target_preparer class="com.android.tradefed.targetprep.PushFilePreparer">
+        <option name="cleanup" value="true" />
+        <option name="push" value="VtsHalBluetoothFinderTargetTest->/data/local/tmp/VtsHalBluetoothFinderTargetTest" />
+    </target_preparer>
+
+    <test class="com.android.tradefed.testtype.GTest" >
+        <option name="native-test-device-path" value="/data/local/tmp" />
+        <option name="module-name" value="VtsHalBluetoothFinderTargetTest" />
+    </test>
+</configuration>
diff --git a/camera/device/default/ExternalCameraDeviceSession.cpp b/camera/device/default/ExternalCameraDeviceSession.cpp
index c962974..88e4b75 100644
--- a/camera/device/default/ExternalCameraDeviceSession.cpp
+++ b/camera/device/default/ExternalCameraDeviceSession.cpp
@@ -786,9 +786,8 @@
                 outputBuffer.bufferId = buffer.bufferId;
                 outputBuffer.status = BufferStatus::ERROR;
                 if (buffer.acquireFence >= 0) {
-                    native_handle_t* handle = native_handle_create(/*numFds*/ 1, /*numInts*/ 0);
-                    handle->data[0] = buffer.acquireFence;
-                    outputBuffer.releaseFence = android::makeToAidl(handle);
+                    outputBuffer.releaseFence.fds.resize(1);
+                    outputBuffer.releaseFence.fds.at(0).set(buffer.acquireFence);
                 }
             } else {
                 offlineBuffers.push_back(buffer);
@@ -1769,9 +1768,8 @@
         result.outputBuffers[i].bufferId = req->buffers[i].bufferId;
         result.outputBuffers[i].status = BufferStatus::ERROR;
         if (req->buffers[i].acquireFence >= 0) {
-            native_handle_t* handle = native_handle_create(/*numFds*/ 1, /*numInts*/ 0);
-            handle->data[0] = req->buffers[i].acquireFence;
-            result.outputBuffers[i].releaseFence = ::android::makeToAidl(handle);
+            result.outputBuffers[i].releaseFence.fds.resize(1);
+            result.outputBuffers[i].releaseFence.fds.at(0).set(req->buffers[i].acquireFence);
         }
     }
 
@@ -1815,18 +1813,16 @@
         if (req->buffers[i].fenceTimeout) {
             result.outputBuffers[i].status = BufferStatus::ERROR;
             if (req->buffers[i].acquireFence >= 0) {
-                native_handle_t* handle = native_handle_create(/*numFds*/ 1, /*numInts*/ 0);
-                handle->data[0] = req->buffers[i].acquireFence;
-                result.outputBuffers[i].releaseFence = ::android::makeToAidl(handle);
+                result.outputBuffers[i].releaseFence.fds.resize(1);
+                result.outputBuffers[i].releaseFence.fds.at(0).set(req->buffers[i].acquireFence);
             }
             notifyError(req->frameNumber, req->buffers[i].streamId, ErrorCode::ERROR_BUFFER);
         } else {
             result.outputBuffers[i].status = BufferStatus::OK;
             // TODO: refactor
             if (req->buffers[i].acquireFence >= 0) {
-                native_handle_t* handle = native_handle_create(/*numFds*/ 1, /*numInts*/ 0);
-                handle->data[0] = req->buffers[i].acquireFence;
-                result.outputBuffers[i].releaseFence = ::android::makeToAidl(handle);
+                result.outputBuffers[i].releaseFence.fds.resize(1);
+                result.outputBuffers[i].releaseFence.fds.at(0).set(req->buffers[i].acquireFence);
             }
         }
     }
diff --git a/compatibility_matrices/Android.bp b/compatibility_matrices/Android.bp
index 712f28a..b3ca293 100644
--- a/compatibility_matrices/Android.bp
+++ b/compatibility_matrices/Android.bp
@@ -31,7 +31,6 @@
         "kernel_config_q_4.14",
         "kernel_config_q_4.19",
     ],
-    core_hals: "only",
 }
 
 vintf_compatibility_matrix {
@@ -45,7 +44,6 @@
         "kernel_config_r_4.19",
         "kernel_config_r_5.4",
     ],
-    core_hals: "only",
 }
 
 vintf_compatibility_matrix {
@@ -59,7 +57,6 @@
         "kernel_config_s_5.4",
         "kernel_config_s_5.10",
     ],
-    core_hals: "only",
 }
 
 vintf_compatibility_matrix {
@@ -72,7 +69,6 @@
         "kernel_config_t_5.10",
         "kernel_config_t_5.15",
     ],
-    core_hals: "only",
 }
 
 vintf_compatibility_matrix {
@@ -85,7 +81,6 @@
         "kernel_config_u_5.15",
         "kernel_config_u_6.1",
     ],
-    core_hals: "only",
 }
 
 vintf_compatibility_matrix {
@@ -98,5 +93,4 @@
         "kernel_config_v_5.15",
         "kernel_config_v_6.1",
     ],
-    core_hals: "only",
 }
diff --git a/compatibility_matrices/Android.mk b/compatibility_matrices/Android.mk
index d356cf3..c2ffb84 100644
--- a/compatibility_matrices/Android.mk
+++ b/compatibility_matrices/Android.mk
@@ -106,9 +106,15 @@
     framework_compatibility_matrix.6.xml \
     framework_compatibility_matrix.7.xml \
     framework_compatibility_matrix.8.xml \
-    framework_compatibility_matrix.9.xml \
     framework_compatibility_matrix.device.xml \
 
+# Only allow the use of the unreleased compatibility matrix when we can use unfrozen
+# interfaces (in the `next` release configuration).
+ifeq ($(RELEASE_AIDL_USE_UNFROZEN),true)
+my_system_matrix_deps += \
+    framework_compatibility_matrix.9.xml
+endif
+
 my_framework_matrix_deps += \
     $(my_system_matrix_deps)
 
diff --git a/compatibility_matrices/build/vintf_compatibility_matrix.go b/compatibility_matrices/build/vintf_compatibility_matrix.go
index 4f342b2..c72cbde 100644
--- a/compatibility_matrices/build/vintf_compatibility_matrix.go
+++ b/compatibility_matrices/build/vintf_compatibility_matrix.go
@@ -35,10 +35,10 @@
 	pctx = android.NewPackageContext("android/vintf")
 
 	assembleVintfRule = pctx.AndroidStaticRule("assemble_vintf", blueprint.RuleParams{
-		Command:     `${assembleVintfCmd} -i ${inputs} -o ${out} ${extraParams}`,
+		Command:     `${assembleVintfCmd} -i ${inputs} -o ${out}`,
 		CommandDeps: []string{"${assembleVintfCmd}"},
 		Description: "assemble_vintf -i ${inputs}",
-	}, "inputs", "extraParams")
+	}, "inputs")
 
 	xmllintXsd = pctx.AndroidStaticRule("xmllint-xsd", blueprint.RuleParams{
 		Command:     `$XmlLintCmd --quiet --schema $xsd $in > /dev/null && touch -a $out`,
@@ -64,13 +64,6 @@
 
 	// list of kernel_config modules to be combined to final output
 	Kernel_configs []string
-
-	// Default is "default" for compatibility matrices on /vendor
-	// and /odm, and "disallow" for compatibility matrices on /system,
-	// /product, and /system_ext.
-	// If value is "only", only android.* HALs are allowed. If value
-	// is "disallow", none of android.* HALs are allowed.
-	Core_hals *string
 }
 
 type vintfCompatibilityMatrixRule struct {
@@ -173,8 +166,7 @@
 		Implicits:   inputPaths,
 		Output:      g.genFile,
 		Args: map[string]string{
-			"inputs":      strings.Join(inputPaths.Strings(), ":"),
-			"extraParams": strings.Join(g.getExtraParams(), " "),
+			"inputs": strings.Join(inputPaths.Strings(), ":"),
 		},
 	})
 	g.generateValidateBuildAction(ctx, g.genFile, schema.Path())
@@ -199,23 +191,3 @@
 		},
 	}
 }
-
-// Return extra parameters to assemble_vintf.
-func (g *vintfCompatibilityMatrixRule) getExtraParams() []string {
-	var extraParams []string
-
-	coreHalsStrategy := proptools.StringDefault(
-		g.properties.Core_hals,
-		g.defaultCoreHalsStrategy(),
-	)
-	extraParams = append(extraParams, "--core-hals", proptools.ShellEscape(coreHalsStrategy))
-	return extraParams
-}
-
-func (g *vintfCompatibilityMatrixRule) defaultCoreHalsStrategy() string {
-	// TODO(b/290408770): default to "disallow" for FCMs
-
-	// For Device (vendor, odm) compatibility matrix, default is
-	// to not check anything.
-	return "default"
-}
diff --git a/compatibility_matrices/compatibility_matrix.8.xml b/compatibility_matrices/compatibility_matrix.8.xml
index 99dcdbb..9057788 100644
--- a/compatibility_matrices/compatibility_matrix.8.xml
+++ b/compatibility_matrices/compatibility_matrix.8.xml
@@ -52,7 +52,7 @@
             <instance>default</instance>
         </interface>
     </hal>
-    <hal format="aidl" optional="true">
+    <hal format="aidl" optional="true" updatable-via-apex="true">
          <name>android.hardware.authsecret</name>
          <version>1</version>
          <interface>
@@ -123,7 +123,7 @@
             <instance>virtual</instance>
         </interface>
     </hal>
-    <hal format="aidl" optional="true">
+    <hal format="aidl" optional="true" updatable-via-apex="true">
         <name>android.hardware.biometrics.fingerprint</name>
         <version>3</version>
         <interface>
@@ -314,7 +314,7 @@
             <instance>default</instance>
         </interface>
     </hal>
-    <hal format="aidl" optional="true">
+    <hal format="aidl" optional="true" updatable-via-apex="true">
         <name>android.hardware.security.keymint</name>
         <version>1-3</version>
         <interface>
@@ -323,7 +323,7 @@
             <instance>strongbox</instance>
         </interface>
     </hal>
-    <hal format="aidl" optional="true">
+    <hal format="aidl" optional="true" updatable-via-apex="true">
         <name>android.hardware.security.keymint</name>
         <version>1-3</version>
         <interface>
@@ -532,7 +532,7 @@
             <regex-instance>SIM[1-9][0-9]*</regex-instance>
         </interface>
     </hal>
-    <hal format="aidl" optional="true">
+    <hal format="aidl" optional="true" updatable-via-apex="true">
         <name>android.hardware.security.secureclock</name>
         <version>1</version>
         <interface>
@@ -540,7 +540,7 @@
             <instance>default</instance>
         </interface>
     </hal>
-    <hal format="aidl" optional="true">
+    <hal format="aidl" optional="true" updatable-via-apex="true">
         <name>android.hardware.security.sharedsecret</name>
         <version>1</version>
         <interface>
@@ -692,7 +692,7 @@
             <instance>default</instance>
         </interface>
     </hal>
-    <hal format="aidl" optional="true">
+    <hal format="aidl" optional="true" updatable-via-apex="true">
         <name>android.hardware.uwb</name>
         <version>1</version>
         <interface>
diff --git a/compatibility_matrices/compatibility_matrix.9.xml b/compatibility_matrices/compatibility_matrix.9.xml
index 83d2665..de2e1d1 100644
--- a/compatibility_matrices/compatibility_matrix.9.xml
+++ b/compatibility_matrices/compatibility_matrix.9.xml
@@ -147,6 +147,14 @@
         </interface>
     </hal>
     <hal format="aidl" optional="true">
+        <name>android.hardware.bluetooth.finder</name>
+        <version>1</version>
+        <interface>
+            <name>IBluetoothFinder</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="aidl" optional="true">
         <name>android.hardware.boot</name>
         <interface>
             <name>IBootControl</name>
@@ -302,6 +310,14 @@
             <instance>default</instance>
         </interface>
     </hal>
+    <hal format="aidl" optional="true">
+        <name>android.hardware.security.secretkeeper</name>
+        <version>1</version>
+        <interface>
+            <name>ISecretkeeper</name>
+            <instance>nonsecure</instance>
+        </interface>
+    </hal>
     <hal format="aidl" optional="true" updatable-via-apex="true">
         <name>android.hardware.security.keymint</name>
         <version>1-3</version>
diff --git a/keymaster/4.0/support/fuzzer/Android.bp b/keymaster/4.0/support/fuzzer/Android.bp
index 8bc681a..f61d10f 100644
--- a/keymaster/4.0/support/fuzzer/Android.bp
+++ b/keymaster/4.0/support/fuzzer/Android.bp
@@ -39,9 +39,17 @@
     ],
     fuzz_config: {
         cc: [
-            "android-media-fuzzing-reports@google.com",
+            "android-hardware-security@google.com",
         ],
-        componentid: 533764,
+        componentid: 1084733,
+        hotlists: [
+            "4593311",
+        ],
+        description: "The fuzzer targets the APIs of libkeymaster4support",
+        vector: "local_no_privileges_required",
+        service_privilege: "privileged",
+        users: "multi_user",
+        fuzzed_code_usage: "shipped",
     },
 }
 
diff --git a/media/c2/aidl/aidl_api/android.hardware.media.c2/current/android/hardware/media/c2/IGraphicBufferAllocator.aidl b/media/c2/aidl/aidl_api/android.hardware.media.c2/current/android/hardware/media/c2/IGraphicBufferAllocator.aidl
index 3e460dd..e13ba1f 100644
--- a/media/c2/aidl/aidl_api/android.hardware.media.c2/current/android/hardware/media/c2/IGraphicBufferAllocator.aidl
+++ b/media/c2/aidl/aidl_api/android.hardware.media.c2/current/android/hardware/media/c2/IGraphicBufferAllocator.aidl
@@ -39,7 +39,7 @@
   ParcelFileDescriptor getWaitableFd();
   parcelable Allocation {
     android.hardware.HardwareBuffer buffer;
-    ParcelFileDescriptor fence;
+    @nullable ParcelFileDescriptor fence;
   }
   parcelable Description {
     int width;
diff --git a/media/c2/aidl/android/hardware/media/c2/IGraphicBufferAllocator.aidl b/media/c2/aidl/android/hardware/media/c2/IGraphicBufferAllocator.aidl
index 49c4ea4..1710242 100644
--- a/media/c2/aidl/android/hardware/media/c2/IGraphicBufferAllocator.aidl
+++ b/media/c2/aidl/android/hardware/media/c2/IGraphicBufferAllocator.aidl
@@ -35,7 +35,7 @@
      */
     parcelable Allocation {
         HardwareBuffer buffer;
-        ParcelFileDescriptor fence;
+        @nullable ParcelFileDescriptor fence;
     }
 
     /**
diff --git a/renderscript/1.0/default/Android.bp b/renderscript/1.0/default/Android.bp
index c68e370..23fa252 100644
--- a/renderscript/1.0/default/Android.bp
+++ b/renderscript/1.0/default/Android.bp
@@ -27,6 +27,12 @@
         "android.hardware.renderscript@1.0",
     ],
 
+    runtime_libs: [
+        "libRS_internal",
+        //TODO(b/313564579) Install libRSDriver as dependency of libRS_internal
+        "libRSDriver",
+    ],
+
     product_variables: {
         override_rs_driver: {
             cflags: ["-DOVERRIDE_RS_DRIVER=%s"],
diff --git a/security/authgraph/aidl/android/hardware/security/authgraph/Arc.cddl b/security/authgraph/aidl/android/hardware/security/authgraph/Arc.cddl
index 4c1b965..0bc39d6 100644
--- a/security/authgraph/aidl/android/hardware/security/authgraph/Arc.cddl
+++ b/security/authgraph/aidl/android/hardware/security/authgraph/Arc.cddl
@@ -28,19 +28,19 @@
     ? -70003 : int,   ; Timestamp in milliseconds since some starting point (generally
                       ; the most recent device boot) which all of the applications within
                       ; the secure domain must agree upon
-    ? -70004 : bstr .size 16,      ; Nonce used in key exchange methods
+    ? -70004 : bstr .size 16,      ; Nonce (a cryptographic random number of 16 bytes) used in key
+                                   ; exchange methods
     ? -70005 : PayloadType,        ; Payload type, if needed to disambiguate, when processing an arc
     ? -70006 : int,                ; Version of the payload structure (if applicable)
     ? -70007 : int,                ; Sequence number (if needed to prevent replay attacks)
     ? -70008 : Direction           ; Direction of the encryption key (i.e. whether it is used to
                                    ; encrypt incoming messages or outgoing messages)
     ? -70009 : bool,               ; "authentication_completed" - this is used during authenticated
-                                   ; key exchange indicate whether signature verification is done
-    ? -70010 : bstr .size 32       ; "session_id" computed during key exchange protocol
+                                   ; key exchange to indicate whether signature verification is done
+    ? -70010 : bstr .size 32       ; "session_id" computed during the key exchange protocol
 }
 
-; Permissions indicate what an arc can be used with. Permissions are added to an arc during the
-; `create()` primitive operation and are propagated during `mint` and `snap` primitive operations.
+; Permissions indicate what an arc can be used with.
 Permission = &(
     -4770552 : IdentityEncoded,  ; "source_id" - in the operations performed by a source, the
                                  ; source adds its own identity to the permissions of an arc.
@@ -54,12 +54,10 @@
                                      ; biometrics.
 )
 
-; Limitations indicate what restrictions are applied on the usage of an arc. Permissions are added
-; to an arc during the `create` primitive operation and are propagated during `snap` primitive
-; operation.
+; Limitations indicate what restrictions are applied on the usage of an arc.
 Limitation = &(
-    -4770554 : bstr,      ; "challenge" - is added to an arc that transfers an auth key to a channel
-                          ; key, in order to ensure the freshness of the authentication.
+    -4770554 : bstr,      ; "challenge" - is added to an arc that encrypts an auth key from a
+                          ; channel key, in order to ensure the freshness of the authentication.
                           ; A challenge is issued by a sink (e.g. Keymint TA, Biometric TAs).
 )
 
@@ -83,7 +81,7 @@
     ; Any other payload formats should also be defined here
 )
 
-SecretKey = &(                     ; One of the payload types of an Arc is a secret key
+SecretKey = &(
     SymmetricKey,
     ECPrivateKey,    ; Private key of a key pair generated for key exchange
 )
diff --git a/security/authgraph/aidl/android/hardware/security/authgraph/IAuthGraphKeyExchange.aidl b/security/authgraph/aidl/android/hardware/security/authgraph/IAuthGraphKeyExchange.aidl
index 6ceb09c..a3fb959 100644
--- a/security/authgraph/aidl/android/hardware/security/authgraph/IAuthGraphKeyExchange.aidl
+++ b/security/authgraph/aidl/android/hardware/security/authgraph/IAuthGraphKeyExchange.aidl
@@ -41,8 +41,8 @@
 interface IAuthGraphKeyExchange {
     /**
      * This method is invoked on P1 (source).
-     * Create an ephermeral EC key pair on NIST curve P-256 and a nonce (of 16 bytes) for
-     * key exchange.
+     * Create an ephermeral EC key pair on NIST curve P-256 and a nonce (a cryptographic random
+     * number of 16 bytes) for key exchange.
      *
      * @return SessionInitiationInfo including the `Key` containing the public key of the created
      * key pair and an arc from the per-boot key to the private key, the nonce, the persistent
@@ -52,8 +52,8 @@
      * `SessionInitiationInfo` serves two purposes:
      * i. A mapping to correlate `create` and `finish` calls to P1 in a particular instance of the
      *    key exchange protocol.
-     * ii.A way to minimize the in-memory storage (P1 can include the nonce in the protected headers
-     *    of the arc).
+     * ii.A way to minimize the in-memory storage of P1 allocated for key exchange (P1 can include
+     *    the nonce in the protected headers of the arc).
      * However, P1 should maintain some form of in-memory record to be able to verify that the input
      * `Key` sent to `finish` is from an unfinished instance of a key exchange protocol, to prevent
      * any replay attacks in `finish`.
@@ -66,9 +66,9 @@
      *     0. If either `peerPubKey`, `peerId`, `peerNonce` is not in the expected format, return
      *        errors: INVALID_PEER_KE_KEY, INVALID_IDENTITY, INVALID_PEER_NONCE respectively.
      *     1. Create an ephemeral EC key pair on NIST curve P-256.
-     *     2. Create a nonce (of 16 bytes).
-     *     3. Compute the diffie-hellman shared secret: Z.
-     *     4. Compute a salt = bstr .cbor [
+     *     2. Create a nonce (a cryptographic random number of 16 bytes).
+     *     3. Compute the Diffie-Hellman shared secret: Z.
+     *     4. Compute a salt_input = bstr .cbor [
      *            source_version:    int,                    ; from input `peerVersion`
      *            sink_pub_key:      bstr .cbor PlainPubKey, ; from step #1
      *            source_pub_key:    bstr .cbor PlainPubKey, ; from input `peerPubKey`
@@ -77,7 +77,8 @@
      *            sink_cert_chain:   bstr .cbor ExplicitKeyDiceCertChain, ; from own identity
      *            source_cert_chain: bstr .cbor ExplicitKeyDiceCertChain, ; from input `peerId`
      *        ]
-     *     5. Extract a cryptographic secret S from Z, using the salt from #4 above.
+     *     5. Extract a cryptographic secret S from Z, using the SHA256 digest of the salt_input
+     *        as the salt.
      *     6. Derive two symmetric encryption keys of 256 bits with:
      *        i. b"KE_ENCRYPTION_KEY_SOURCE_TO_SINK" as context for the key used to encrypt incoming
      *           messages
@@ -96,28 +97,29 @@
      *        part of the party's identity.
      *
      * @param peerPubKey - the public key of the key pair created by the peer (P1) for key exchange
+     *                     in `create`
      *
      * @param peerId - the persistent identity of the peer
      *
-     * @param peerNonce - nonce created by the peer
+     * @param peerNonce - nonce created by the peer in `create`
      *
      * @param peerVersion - an integer representing the latest protocol version (i.e. AIDL version)
      *                      supported by the peer
      *
-     * @return KeInitResult including the `Key` containing the public key of the created key pair,
-     * the nonce, the persistent identity, two shared key arcs from step #7, session id, signature
-     * over the session id and the negotiated protocol version. The negotiated protocol version
-     * should be less than or equal to the peer's version.
+     * @return KeInitResult including the `Key` containing the public key of the key pair created in
+     * step #1, the nonce from step #2, the persistent identity of P2, two shared key arcs
+     * from step #7, session id from step #10, signature over the session id from step #11 and the
+     * negotiated protocol version. The negotiated protocol version should be less than or equal to
+     * the `peerVersion`.
      *
-     * Note: The two shared key arcs in the return type: `KeInitResult` serves two purposes:
+     * Note: The two shared key arcs in the return type: `KeInitResult` serve two purposes:
      * i. A mapping to correlate `init` and `authenticationComplete` calls to P2 in a particular
      *    instance of the key exchange protocol.
      * ii.A way to minimize the in-memory storage of P2 allocated for key exchange.
      * However, P2 should maintain some in-memory record to be able to verify that the input
-     * `sharedkeys` sent to `authenticationComplete` and to any subsequent AuthGraph protocol
-     * methods are valid shared keys agreed with the party identified by `peerId`, to prevent
-     * any replay attacks in `authenticationComplete` and in any subsequent AuthGraph protocol
-     * methods which use the shared keys to encrypt the secret messages.
+     * `sharedkeys` sent to `authenticationComplete` are from an unfinished instance of a key
+     * exchange protocol carried out with the party identified by `peerId`, to prevent any replay
+     * attacks in `authenticationComplete`.
      */
     KeInitResult init(
             in PubKey peerPubKey, in Identity peerId, in byte[] peerNonce, in int peerVersion);
@@ -133,8 +135,8 @@
      *        exchange protocol, return error: INVALID_KE_KEY. Similarly, if the public key or the
      *        arc containing the private key in `ownKey` is invalid, return INVALID_PUB_KEY_IN_KEY
      *        and INVALID_PRIV_KEY_ARC_IN_KEY respectively.
-     *     1. Compute the diffie-hellman shared secret: Z.
-     *     2. Compute a salt = bstr .cbor [
+     *     1. Compute the Diffie-Hellman shared secret: Z.
+     *     2. Compute a salt_input = bstr .cbor [
      *            source_version:    int,                    ; the protocol version used in `create`
      *            sink_pub_key:      bstr .cbor PlainPubKey, ; from input `peerPubKey`
      *            source_pub_key:    bstr .cbor PlainPubKey, ; from the output of `create`
@@ -143,7 +145,8 @@
      *            sink_cert_chain:   bstr .cbor ExplicitKeyDiceCertChain, ; from input `peerId`
      *            source_cert_chain: bstr .cbor ExplicitKeyDiceCertChain, ; from own identity
      *        ]
-     *     3. Extract a cryptographic secret S from Z, using the salt from #2 above.
+     *     3. Extract a cryptographic secret S from Z, using the SHA256 digest of the salt_input
+     *        as the salt.
      *     4. Derive two symmetric encryption keys of 256 bits with:
      *        i. b"KE_ENCRYPTION_KEY_SOURCE_TO_SINK" as context for the key used to encrypt outgoing
      *           messages
@@ -164,25 +167,26 @@
      *        part of the party's identity.
      *
      * @param peerPubKey - the public key of the key pair created by the peer (P2) for key exchange
+     *                     in `init`
      *
      * @param peerId - the persistent identity of the peer
      *
      * @param peerSignature - the signature created by the peer over the session id computed by the
-     *                        peer
+     *                        peer in `init`
      *
-     * @param peerNonce - nonce created by the peer
+     * @param peerNonce - nonce created by the peer in `init`
      *
      * @param peerVersion - an integer representing the protocol version (i.e. AIDL version)
      *                      negotiated with the peer
      *
-     * @param ownKey - the key created by P1 (source) in `create()` for key exchange
+     * @param ownKey - the key created by P1 (source) in `create` for key exchange
      *
-     * @return SessionInfo including the two shared key arcs from step #9, session id and the
-     * signature over the session id.
+     * @return SessionInfo including the two shared key arcs from step #9, session id from step #7
+     * and the signature over the session id from step #10.
      *
-     * Note: The two shared key arcs in the return type: `SessionInfo` serves two purposes:
+     * Note: The two shared key arcs in the return type: `SessionInfo` serve two purposes:
      * i. A mapping to correlate the key exchange protocol taken place with a particular peer and
-     *    subsequent AuthGraph protocols execued with the same peer.
+     *    subsequent AuthGraph protocols executed with the same peer.
      * ii.A way to minimize the in-memory storage for shared keys.
      * However, P1 should maintain some in-memory record to be able to verify that the shared key
      * arcs sent to any subsequent AuthGraph protocol methods are valid shared keys agreed with the
@@ -196,21 +200,33 @@
      * This method is invoked on P2 (sink).
      * Perform the following steps:
      *   0. If input `sharedKeys` is invalid (i.e. they cannot be decrypted with P2's per-boot key
-     *      or they are not in P2's in-memory records as valid shared keys agreed with the party
-     *      identified by `peerId`), return error: INVALID_SHARED_KEY_ARCS.
+     *      or they are not in P2's in-memory records for unfinished instances of a key exchange
+     *      protocol carried out with the party identified by the identity included in the
+     *      `source_id` protected header of the shared key arcs),
+     *      return error: INVALID_SHARED_KEY_ARCS.
      *   1. Verify that both shared key arcs have the same session id and peer identity.
-     *   2. Verify the peer's signature over the session id attached to the shared key arcs'
-     *      headers. If successful, proceed, otherwise, return error: INVALID_SIGNATURE.
-     *   3. Mark authentication_complete = true in the shared key arcs' headers
+     *   2. Verify the `peerSignature` over the session id included in the `session_id` protected
+     *      header of the shared key arcs.
+     *      If successful, proceed, otherwise, return error: INVALID_SIGNATURE.
+     *   3. Mark authentication_complete = true in the shared key arcs' headers.
      *
      * @param peerSignature - the signature created by the peer over the session id computed by the
-     *                        peer
+     *                        peer in `finish`
      *
      * @param sharedKeys - two shared key arcs created by P2 in `init`. P2 obtains from the arcs'
      *                     protected headers, the session id and the peer's identity to verify the
      *                     peer's signature over the session id.
      *
      * @return Arc[] - an array of two updated shared key arcs
+     *
+     * Note: The two returned shared key arcs serve two purposes:
+     * i. A mapping to correlate the key exchange protocol taken place with a particular peer and
+     *    subsequent AuthGraph protocols executed with the same peer.
+     * ii.A way to minimize the in-memory storage for shared keys.
+     * However, P2 should maintain some in-memory record to be able to verify that the shared key
+     * arcs sent to any subsequent AuthGraph protocol methods are valid shared keys agreed with the
+     * party identified by the identity included in the `source_id` protected header of the shared
+     * key arcs, to prevent any replay attacks.
      */
     Arc[2] authenticationComplete(in SessionIdSignature peerSignature, in Arc[2] sharedKeys);
 }
diff --git a/security/authgraph/aidl/android/hardware/security/authgraph/SessionInfo.aidl b/security/authgraph/aidl/android/hardware/security/authgraph/SessionInfo.aidl
index ef49a1a..82b8c17 100644
--- a/security/authgraph/aidl/android/hardware/security/authgraph/SessionInfo.aidl
+++ b/security/authgraph/aidl/android/hardware/security/authgraph/SessionInfo.aidl
@@ -26,8 +26,8 @@
 @RustDerive(Clone=true, Eq=true, PartialEq=true)
 parcelable SessionInfo {
     /**
-     * The arcs that encrypt the two derived symmetric encryption keys (for two-way communication)
-     * from the party's per-boot key.
+     * The arcs that encrypt the two derived symmetric encryption keys (for two-way communication).
+     * The encryption key is the party's per-boot key.
      */
     Arc[2] sharedKeys;
 
diff --git a/security/authgraph/aidl/android/hardware/security/authgraph/SessionInitiationInfo.aidl b/security/authgraph/aidl/android/hardware/security/authgraph/SessionInitiationInfo.aidl
index c630d91..8179ac2 100644
--- a/security/authgraph/aidl/android/hardware/security/authgraph/SessionInitiationInfo.aidl
+++ b/security/authgraph/aidl/android/hardware/security/authgraph/SessionInitiationInfo.aidl
@@ -27,20 +27,22 @@
 @RustDerive(Clone=true, Eq=true, PartialEq=true)
 parcelable SessionInitiationInfo {
     /**
-     * An ephemeral EC key created for the ECDH process.
+     * An ephemeral EC key created for the Elliptic-curve Diffie-Hellman (ECDH) process.
      */
     Key key;
 
     /**
-     * The identity of the party who created the Diffie-Hellman key exchange key.
+     * The identity of the party who creates this `SessionInitiationInfo`.
      */
     Identity identity;
 
     /**
-     * Nonce value specific to this session. The nonce serves three purposes:
+     * Nonce (a cryptographic random number of 16 bytes) specific to this session.
+     * The nonce serves three purposes:
      * 1. freshness of key exchange
      * 2. creating a session id (a publicly known value related to the exchanged keys)
-     * 3. usage as salt into the HKDF-EXTRACT function during key derivation from the shared DH key
+     * 3. usage as salt into the HKDF-EXTRACT function during key derivation from the Diffie-Hellman
+     *    shared secret
      */
     byte[] nonce;
 
diff --git a/security/authgraph/aidl/vts/functional/Android.bp b/security/authgraph/aidl/vts/functional/Android.bp
index 0e3480f..28a70e2 100644
--- a/security/authgraph/aidl/vts/functional/Android.bp
+++ b/security/authgraph/aidl/vts/functional/Android.bp
@@ -50,6 +50,7 @@
 rust_test {
     name: "VtsAidlAuthGraphRoleTest",
     srcs: ["role_test.rs"],
+    require_root: true,
     test_suites: [
         "general-tests",
         "vts",
diff --git a/security/authgraph/aidl/vts/functional/lib.rs b/security/authgraph/aidl/vts/functional/lib.rs
index 7b9b2b9..da3fa1c 100644
--- a/security/authgraph/aidl/vts/functional/lib.rs
+++ b/security/authgraph/aidl/vts/functional/lib.rs
@@ -24,22 +24,19 @@
     PlainPubKey::PlainPubKey, PubKey::PubKey, SessionIdSignature::SessionIdSignature,
 };
 use authgraph_boringssl as boring;
-use authgraph_core::keyexchange as ke;
-use authgraph_core::{arc, key, traits};
-use authgraph_nonsecure::StdClock;
+use authgraph_core::{error::Error as AgError, keyexchange as ke};
 use coset::CborSerializable;
 
 pub mod sink;
 pub mod source;
 
-/// Return a collection of AuthGraph trait implementations suitable for testing.
-pub fn test_impls() -> traits::TraitImpl {
-    // Note that the local implementation is using a clock with a potentially different epoch than
-    // the implementation under test.
-    boring::trait_impls(
+/// Return an AuthGraphParticipant suitable for testing.
+pub fn test_ag_participant() -> Result<ke::AuthGraphParticipant, AgError> {
+    Ok(ke::AuthGraphParticipant::new(
+        boring::crypto_trait_impls(),
         Box::<boring::test_device::AgDevice>::default(),
-        Some(Box::new(StdClock::default())),
-    )
+        ke::MAX_OPENED_SESSIONS,
+    )?)
 }
 
 fn build_plain_pub_key(pub_key: &Option<Vec<u8>>) -> PubKey {
@@ -56,14 +53,6 @@
     }
 }
 
-fn verification_key_from_identity(impls: &traits::TraitImpl, identity: &[u8]) -> key::EcVerifyKey {
-    let identity = key::Identity::from_slice(identity).expect("invalid identity CBOR");
-    impls
-        .device
-        .process_peer_cert_chain(&identity.cert_chain, &*impls.ecdsa)
-        .expect("failed to extract signing key")
-}
-
 fn vec_to_identity(data: &[u8]) -> Identity {
     Identity {
         identity: data.to_vec(),
@@ -75,26 +64,3 @@
         signature: data.to_vec(),
     }
 }
-
-/// Decrypt a pair of AES-256 keys encrypted with the AuthGraph PBK.
-pub fn decipher_aes_keys(imp: &traits::TraitImpl, arc: &[Vec<u8>; 2]) -> [key::AesKey; 2] {
-    [
-        decipher_aes_key(imp, &arc[0]),
-        decipher_aes_key(imp, &arc[1]),
-    ]
-}
-
-/// Decrypt an AES-256 key encrypted with the AuthGraph PBK.
-pub fn decipher_aes_key(imp: &traits::TraitImpl, arc: &[u8]) -> key::AesKey {
-    let pbk = imp.device.get_per_boot_key().expect("no PBK available");
-    let arc::ArcContent {
-        payload,
-        protected_headers: _,
-        unprotected_headers: _,
-    } = arc::decipher_arc(&pbk, arc, &*imp.aes_gcm).expect("failed to decrypt arc");
-    assert_eq!(payload.0.len(), 32);
-    let mut key = key::AesKey([0; 32]);
-    key.0.copy_from_slice(&payload.0);
-    assert_ne!(key.0, [0; 32], "agreed AES-256 key should be non-zero");
-    key
-}
diff --git a/security/authgraph/aidl/vts/functional/role_test.rs b/security/authgraph/aidl/vts/functional/role_test.rs
index e95361a..3075d8a 100644
--- a/security/authgraph/aidl/vts/functional/role_test.rs
+++ b/security/authgraph/aidl/vts/functional/role_test.rs
@@ -22,13 +22,18 @@
 use android_hardware_security_authgraph::aidl::android::hardware::security::authgraph::{
     IAuthGraphKeyExchange::IAuthGraphKeyExchange,
 };
+use binder::StatusCode;
 
 const AUTH_GRAPH_NONSECURE: &str =
     "android.hardware.security.authgraph.IAuthGraphKeyExchange/nonsecure";
 
 /// Retrieve the /nonsecure instance of AuthGraph, which supports both sink and source roles.
 fn get_nonsecure() -> Option<binder::Strong<dyn IAuthGraphKeyExchange>> {
-    binder::get_interface(AUTH_GRAPH_NONSECURE).ok()
+    match binder::get_interface(AUTH_GRAPH_NONSECURE) {
+        Ok(ag) => Some(ag),
+        Err(StatusCode::NAME_NOT_FOUND) => None,
+        Err(e) => panic!("failed to get AuthGraph/nonsecure: {e:?}"),
+    }
 }
 
 /// Macro to require availability of a /nonsecure instance of AuthGraph.
@@ -48,31 +53,31 @@
 
 #[test]
 fn test_nonsecure_source_mainline() {
-    let mut impls = vts::test_impls();
-    vts::source::test_mainline(&mut impls, require_nonsecure!());
+    let mut sink = vts::test_ag_participant().expect("failed to create a local sink");
+    vts::source::test_mainline(&mut sink, require_nonsecure!());
 }
 #[test]
 fn test_nonsecure_source_corrupt_sig() {
-    let mut impls = vts::test_impls();
-    vts::source::test_corrupt_sig(&mut impls, require_nonsecure!());
+    let mut sink = vts::test_ag_participant().expect("failed to create a local sink");
+    vts::source::test_corrupt_sig(&mut sink, require_nonsecure!());
 }
 #[test]
 fn test_nonsecure_source_corrupt_keys() {
-    let mut impls = vts::test_impls();
-    vts::source::test_corrupt_key(&mut impls, require_nonsecure!());
+    let mut sink = vts::test_ag_participant().expect("failed to create a local sink");
+    vts::source::test_corrupt_key(&mut sink, require_nonsecure!());
 }
 #[test]
 fn test_nonsecure_sink_mainline() {
-    let mut impls = vts::test_impls();
-    vts::sink::test_mainline(&mut impls, require_nonsecure!());
+    let mut source = vts::test_ag_participant().expect("failed to create a local source");
+    vts::sink::test_mainline(&mut source, require_nonsecure!());
 }
 #[test]
 fn test_nonsecure_sink_corrupt_sig() {
-    let mut impls = vts::test_impls();
-    vts::sink::test_corrupt_sig(&mut impls, require_nonsecure!());
+    let mut source = vts::test_ag_participant().expect("failed to create a local source");
+    vts::sink::test_corrupt_sig(&mut source, require_nonsecure!());
 }
 #[test]
 fn test_nonsecure_sink_corrupt_keys() {
-    let mut impls = vts::test_impls();
-    vts::sink::test_corrupt_keys(&mut impls, require_nonsecure!());
+    let mut source = vts::test_ag_participant().expect("failed to create a local source");
+    vts::sink::test_corrupt_keys(&mut source, require_nonsecure!());
 }
diff --git a/security/authgraph/aidl/vts/functional/sink.rs b/security/authgraph/aidl/vts/functional/sink.rs
index 5c81593..bb357b8 100644
--- a/security/authgraph/aidl/vts/functional/sink.rs
+++ b/security/authgraph/aidl/vts/functional/sink.rs
@@ -16,23 +16,28 @@
 
 //! VTS tests for sinks
 use super::*;
-use authgraph_core::traits;
+use authgraph_core::{key, keyexchange as ke};
 
 /// Run AuthGraph tests against the provided sink, using a local test source implementation.
-pub fn test(impls: &mut traits::TraitImpl, sink: binder::Strong<dyn IAuthGraphKeyExchange>) {
-    test_mainline(impls, sink.clone());
-    test_corrupt_sig(impls, sink.clone());
-    test_corrupt_keys(impls, sink);
+pub fn test(
+    local_source: &mut ke::AuthGraphParticipant,
+    sink: binder::Strong<dyn IAuthGraphKeyExchange>,
+) {
+    test_mainline(local_source, sink.clone());
+    test_corrupt_sig(local_source, sink.clone());
+    test_corrupt_keys(local_source, sink);
 }
 
 /// Perform mainline AuthGraph key exchange with the provided sink and local implementation.
 /// Return the agreed AES keys in plaintext.
 pub fn test_mainline(
-    impls: &mut traits::TraitImpl,
+    local_source: &mut ke::AuthGraphParticipant,
     sink: binder::Strong<dyn IAuthGraphKeyExchange>,
 ) -> [key::AesKey; 2] {
     // Step 1: create an ephemeral ECDH key at the (local) source.
-    let source_init_info = ke::create(impls).expect("failed to create() with local impl");
+    let source_init_info = local_source
+        .create()
+        .expect("failed to create() with local impl");
 
     // Step 2: pass the source's ECDH public key and other session info to the (remote) sink.
     let init_result = sink
@@ -50,40 +55,43 @@
     assert!(!sink_info.sessionId.is_empty());
 
     // The AuthGraph core library will verify the session ID signature, but do it here too.
-    let sink_verification_key =
-        verification_key_from_identity(&impls, &sink_init_info.identity.identity);
-    ke::verify_signature_on_session_id(
-        &sink_verification_key,
-        &sink_info.sessionId,
-        &sink_info.signature.signature,
-        &*impls.ecdsa,
-    )
-    .expect("failed verification of signed session ID");
+    let sink_verification_key = local_source
+        .peer_verification_key_from_identity(&sink_init_info.identity.identity)
+        .expect("failed to get peer verification from identity");
+    local_source
+        .verify_signature_on_session_id(
+            &sink_verification_key,
+            &sink_info.sessionId,
+            &sink_info.signature.signature,
+        )
+        .expect("failed verification of signed session ID");
 
     // Step 3: pass the sink's ECDH public key and other session info to the (local) source, so it
     // can calculate the same pair of symmetric keys.
-    let source_info = ke::finish(
-        impls,
-        &sink_pub_key.plainPubKey,
-        &sink_init_info.identity.identity,
-        &sink_info.signature.signature,
-        &sink_init_info.nonce,
-        sink_init_info.version,
-        source_init_info.ke_key,
-    )
-    .expect("failed to finish() with local impl");
+    let source_info = local_source
+        .finish(
+            &sink_pub_key.plainPubKey,
+            &sink_init_info.identity.identity,
+            &sink_info.signature.signature,
+            &sink_init_info.nonce,
+            sink_init_info.version,
+            source_init_info.ke_key,
+        )
+        .expect("failed to finish() with local impl");
     assert!(!source_info.session_id.is_empty());
 
     // The AuthGraph core library will verify the session ID signature, but do it here too.
-    let source_verification_key =
-        verification_key_from_identity(&impls, &source_init_info.identity);
-    ke::verify_signature_on_session_id(
-        &source_verification_key,
-        &source_info.session_id,
-        &source_info.session_id_signature,
-        &*impls.ecdsa,
-    )
-    .expect("failed verification of signed session ID");
+    let source_verification_key = key::Identity::from_slice(&source_init_info.identity)
+        .expect("invalid identity CBOR")
+        .cert_chain
+        .root_key;
+    local_source
+        .verify_signature_on_session_id(
+            &source_verification_key,
+            &source_info.session_id,
+            &source_info.session_id_signature,
+        )
+        .expect("failed verification of signed session ID");
 
     // Both ends should agree on the session ID.
     assert_eq!(source_info.session_id, sink_info.sessionId);
@@ -96,19 +104,28 @@
             &sink_info.sharedKeys,
         )
         .expect("failed to authenticationComplete() with remote sink");
-
     // Decrypt and return the session keys.
-    decipher_aes_keys(&impls, &source_info.shared_keys)
+    let decrypted_shared_keys = local_source
+        .decipher_shared_keys_from_arcs(&source_info.shared_keys)
+        .expect("failed to decrypt shared key arcs")
+        .try_into();
+    let decrypted_shared_keys_array = match decrypted_shared_keys {
+        Ok(array) => array,
+        Err(_) => panic!("wrong number of decrypted shared key arcs"),
+    };
+    decrypted_shared_keys_array
 }
 
 /// Perform mainline AuthGraph key exchange with the provided sink, but provide an invalid
 /// session ID signature.
 pub fn test_corrupt_sig(
-    impls: &mut traits::TraitImpl,
+    local_source: &mut ke::AuthGraphParticipant,
     sink: binder::Strong<dyn IAuthGraphKeyExchange>,
 ) {
     // Step 1: create an ephemeral ECDH key at the (local) source.
-    let source_init_info = ke::create(impls).expect("failed to create() with local impl");
+    let source_init_info = local_source
+        .create()
+        .expect("failed to create() with local impl");
 
     // Step 2: pass the source's ECDH public key and other session info to the (remote) sink.
     let init_result = sink
@@ -127,16 +144,16 @@
 
     // Step 3: pass the sink's ECDH public key and other session info to the (local) source, so it
     // can calculate the same pair of symmetric keys.
-    let source_info = ke::finish(
-        impls,
-        &sink_pub_key.plainPubKey,
-        &sink_init_info.identity.identity,
-        &sink_info.signature.signature,
-        &sink_init_info.nonce,
-        sink_init_info.version,
-        source_init_info.ke_key,
-    )
-    .expect("failed to finish() with local impl");
+    let source_info = local_source
+        .finish(
+            &sink_pub_key.plainPubKey,
+            &sink_init_info.identity.identity,
+            &sink_info.signature.signature,
+            &sink_init_info.nonce,
+            sink_init_info.version,
+            source_init_info.ke_key,
+        )
+        .expect("failed to finish() with local impl");
     assert!(!source_info.session_id.is_empty());
 
     // Build a corrupted version of the (local) source's session ID signature.
@@ -158,11 +175,13 @@
 /// Perform mainline AuthGraph key exchange with the provided sink, but provide an invalid
 /// Arc for the sink's key.
 pub fn test_corrupt_keys(
-    impls: &mut traits::TraitImpl,
+    local_source: &mut ke::AuthGraphParticipant,
     sink: binder::Strong<dyn IAuthGraphKeyExchange>,
 ) {
     // Step 1: create an ephemeral ECDH key at the (local) source.
-    let source_init_info = ke::create(impls).expect("failed to create() with local impl");
+    let source_init_info = local_source
+        .create()
+        .expect("failed to create() with local impl");
 
     // Step 2: pass the source's ECDH public key and other session info to the (remote) sink.
     let init_result = sink
@@ -181,16 +200,16 @@
 
     // Step 3: pass the sink's ECDH public key and other session info to the (local) source, so it
     // can calculate the same pair of symmetric keys.
-    let source_info = ke::finish(
-        impls,
-        &sink_pub_key.plainPubKey,
-        &sink_init_info.identity.identity,
-        &sink_info.signature.signature,
-        &sink_init_info.nonce,
-        sink_init_info.version,
-        source_init_info.ke_key,
-    )
-    .expect("failed to finish() with local impl");
+    let source_info = local_source
+        .finish(
+            &sink_pub_key.plainPubKey,
+            &sink_init_info.identity.identity,
+            &sink_info.signature.signature,
+            &sink_init_info.nonce,
+            sink_init_info.version,
+            source_init_info.ke_key,
+        )
+        .expect("failed to finish() with local impl");
     assert!(!source_info.session_id.is_empty());
 
     // Deliberately corrupt the sink's shared key Arcs before returning them
diff --git a/security/authgraph/aidl/vts/functional/source.rs b/security/authgraph/aidl/vts/functional/source.rs
index 9aaaaee..a1e76b3 100644
--- a/security/authgraph/aidl/vts/functional/source.rs
+++ b/security/authgraph/aidl/vts/functional/source.rs
@@ -16,19 +16,22 @@
 
 //! VTS tests for sources
 use super::*;
-use authgraph_core::traits;
+use authgraph_core::{key, keyexchange as ke};
 
 /// Run AuthGraph tests against the provided source, using a local test sink implementation.
-pub fn test(impls: &mut traits::TraitImpl, source: binder::Strong<dyn IAuthGraphKeyExchange>) {
-    test_mainline(impls, source.clone());
-    test_corrupt_sig(impls, source.clone());
-    test_corrupt_key(impls, source);
+pub fn test(
+    local_sink: &mut ke::AuthGraphParticipant,
+    source: binder::Strong<dyn IAuthGraphKeyExchange>,
+) {
+    test_mainline(local_sink, source.clone());
+    test_corrupt_sig(local_sink, source.clone());
+    test_corrupt_key(local_sink, source);
 }
 
 /// Perform mainline AuthGraph key exchange with the provided source.
 /// Return the agreed AES keys in plaintext.
 pub fn test_mainline(
-    impls: &mut traits::TraitImpl,
+    local_sink: &mut ke::AuthGraphParticipant,
     source: binder::Strong<dyn IAuthGraphKeyExchange>,
 ) -> [key::AesKey; 2] {
     // Step 1: create an ephemeral ECDH key at the (remote) source.
@@ -40,14 +43,14 @@
     let source_pub_key = extract_plain_pub_key(&source_init_info.key.pubKey);
 
     // Step 2: pass the source's ECDH public key and other session info to the (local) sink.
-    let init_result = ke::init(
-        impls,
-        &source_pub_key.plainPubKey,
-        &source_init_info.identity.identity,
-        &source_init_info.nonce,
-        source_init_info.version,
-    )
-    .expect("failed to init() with local impl");
+    let init_result = local_sink
+        .init(
+            &source_pub_key.plainPubKey,
+            &source_init_info.identity.identity,
+            &source_init_info.nonce,
+            source_init_info.version,
+        )
+        .expect("failed to init() with local impl");
     let sink_init_info = init_result.session_init_info;
     let sink_pub_key = sink_init_info
         .ke_key
@@ -58,14 +61,17 @@
     assert!(!sink_info.session_id.is_empty());
 
     // The AuthGraph core library will verify the session ID signature, but do it here too.
-    let sink_verification_key = verification_key_from_identity(&impls, &sink_init_info.identity);
-    ke::verify_signature_on_session_id(
-        &sink_verification_key,
-        &sink_info.session_id,
-        &sink_info.session_id_signature,
-        &*impls.ecdsa,
-    )
-    .expect("failed verification of signed session ID");
+    let sink_verification_key = key::Identity::from_slice(&sink_init_info.identity)
+        .expect("invalid identity CBOR")
+        .cert_chain
+        .root_key;
+    local_sink
+        .verify_signature_on_session_id(
+            &sink_verification_key,
+            &sink_info.session_id,
+            &sink_info.session_id_signature,
+        )
+        .expect("failed verification of signed session ID");
 
     // Step 3: pass the sink's ECDH public key and other session info to the (remote) source, so it
     // can calculate the same pair of symmetric keys.
@@ -86,36 +92,41 @@
     assert!(!source_info.sessionId.is_empty());
 
     // The AuthGraph core library will verify the session ID signature, but do it here too.
-    let source_verification_key =
-        verification_key_from_identity(&impls, &source_init_info.identity.identity);
-    ke::verify_signature_on_session_id(
-        &source_verification_key,
-        &source_info.sessionId,
-        &source_info.signature.signature,
-        &*impls.ecdsa,
-    )
-    .expect("failed verification of signed session ID");
+    let source_verification_key = local_sink
+        .peer_verification_key_from_identity(&source_init_info.identity.identity)
+        .expect("failed to get peer verification from identity");
+    local_sink
+        .verify_signature_on_session_id(
+            &source_verification_key,
+            &source_info.sessionId,
+            &source_info.signature.signature,
+        )
+        .expect("failed verification of signed session ID");
 
     // Both ends should agree on the session ID.
     assert_eq!(source_info.sessionId, sink_info.session_id);
 
     // Step 4: pass the (remote) source's session ID signature back to the sink, so it can check it
     // and update the symmetric keys so they're marked as authentication complete.
-    let sink_arcs = ke::authentication_complete(
-        impls,
-        &source_info.signature.signature,
-        sink_info.shared_keys,
-    )
-    .expect("failed to authenticationComplete() with local sink");
-
+    let sink_arcs = local_sink
+        .authentication_complete(&source_info.signature.signature, sink_info.shared_keys)
+        .expect("failed to authenticationComplete() with local sink");
     // Decrypt and return the session keys.
-    decipher_aes_keys(&impls, &sink_arcs)
+    let decrypted_shared_keys = local_sink
+        .decipher_shared_keys_from_arcs(&sink_arcs)
+        .expect("failed to decrypt shared key arcs")
+        .try_into();
+    let decrypted_shared_keys_array = match decrypted_shared_keys {
+        Ok(array) => array,
+        Err(_) => panic!("wrong number of decrypted shared key arcs"),
+    };
+    decrypted_shared_keys_array
 }
 
 /// Perform mainline AuthGraph key exchange with the provided source, but provide an invalid session
 /// ID signature.
 pub fn test_corrupt_sig(
-    impls: &mut traits::TraitImpl,
+    local_sink: &mut ke::AuthGraphParticipant,
     source: binder::Strong<dyn IAuthGraphKeyExchange>,
 ) {
     // Step 1: create an ephemeral ECDH key at the (remote) source.
@@ -127,14 +138,14 @@
     let source_pub_key = extract_plain_pub_key(&source_init_info.key.pubKey);
 
     // Step 2: pass the source's ECDH public key and other session info to the (local) sink.
-    let init_result = ke::init(
-        impls,
-        &source_pub_key.plainPubKey,
-        &source_init_info.identity.identity,
-        &source_init_info.nonce,
-        source_init_info.version,
-    )
-    .expect("failed to init() with local impl");
+    let init_result = local_sink
+        .init(
+            &source_pub_key.plainPubKey,
+            &source_init_info.identity.identity,
+            &source_init_info.nonce,
+            source_init_info.version,
+        )
+        .expect("failed to init() with local impl");
     let sink_init_info = init_result.session_init_info;
     let sink_pub_key = sink_init_info
         .ke_key
@@ -172,7 +183,7 @@
 /// Perform mainline AuthGraph key exchange with the provided source, but give it back
 /// a corrupted key.
 pub fn test_corrupt_key(
-    impls: &mut traits::TraitImpl,
+    local_sink: &mut ke::AuthGraphParticipant,
     source: binder::Strong<dyn IAuthGraphKeyExchange>,
 ) {
     // Step 1: create an ephemeral ECDH key at the (remote) source.
@@ -184,14 +195,14 @@
     let source_pub_key = extract_plain_pub_key(&source_init_info.key.pubKey);
 
     // Step 2: pass the source's ECDH public key and other session info to the (local) sink.
-    let init_result = ke::init(
-        impls,
-        &source_pub_key.plainPubKey,
-        &source_init_info.identity.identity,
-        &source_init_info.nonce,
-        source_init_info.version,
-    )
-    .expect("failed to init() with local impl");
+    let init_result = local_sink
+        .init(
+            &source_pub_key.plainPubKey,
+            &source_init_info.identity.identity,
+            &source_init_info.nonce,
+            source_init_info.version,
+        )
+        .expect("failed to init() with local impl");
     let sink_init_info = init_result.session_init_info;
     let sink_pub_key = sink_init_info
         .ke_key
@@ -202,14 +213,17 @@
     assert!(!sink_info.session_id.is_empty());
 
     // The AuthGraph core library will verify the session ID signature, but do it here too.
-    let sink_verification_key = verification_key_from_identity(&impls, &sink_init_info.identity);
-    ke::verify_signature_on_session_id(
-        &sink_verification_key,
-        &sink_info.session_id,
-        &sink_info.session_id_signature,
-        &*impls.ecdsa,
-    )
-    .expect("failed verification of signed session ID");
+    let sink_verification_key = key::Identity::from_slice(&sink_init_info.identity)
+        .expect("invalid identity CBOR")
+        .cert_chain
+        .root_key;
+    local_sink
+        .verify_signature_on_session_id(
+            &sink_verification_key,
+            &sink_info.session_id,
+            &sink_info.session_id_signature,
+        )
+        .expect("failed verification of signed session ID");
 
     // Deliberately corrupt the source's encrypted key.
     let mut corrupt_key = source_init_info.key.clone();
@@ -236,9 +250,13 @@
         &corrupt_key,
     );
 
-    let err = result.expect_err("expect failure with corrupt signature");
-    assert_eq!(
-        err,
-        binder::Status::new_service_specific_error(Error::INVALID_PRIV_KEY_ARC_IN_KEY.0, None)
+    let err = result.expect_err("expect failure with corrupt key");
+    assert!(
+        err == binder::Status::new_service_specific_error(Error::INVALID_KE_KEY.0, None)
+            || err
+                == binder::Status::new_service_specific_error(
+                    Error::INVALID_PRIV_KEY_ARC_IN_KEY.0,
+                    None
+                )
     );
 }
diff --git a/security/authgraph/default/Android.bp b/security/authgraph/default/Android.bp
index c481075..7894477 100644
--- a/security/authgraph/default/Android.bp
+++ b/security/authgraph/default/Android.bp
@@ -46,11 +46,11 @@
     name: "android.hardware.security.authgraph-service.nonsecure",
     relative_install_path: "hw",
     vendor: true,
-    init_rc: ["authgraph.rc"],
-    vintf_fragments: ["authgraph.xml"],
+    installable: false, // install com.android.hardware.security.authgraph
     defaults: [
         "authgraph_use_latest_hal_aidl_rust",
     ],
+    prefer_rlib: true,
     rustlibs: [
         "libandroid_logger",
         "libauthgraph_hal",
@@ -80,3 +80,34 @@
         ],
     },
 }
+
+prebuilt_etc {
+    name: "authgraph.xml",
+    src: "authgraph.xml",
+    sub_dir: "vintf",
+    installable: false,
+}
+
+prebuilt_etc {
+    name: "authgraph.rc",
+    src: "authgraph.rc",
+    installable: false,
+}
+
+apex {
+    name: "com.android.hardware.security.authgraph",
+    manifest: "apex_manifest.json",
+    file_contexts: "apex_file_contexts",
+    key: "com.android.hardware.key",
+    certificate: ":com.android.hardware.certificate",
+    vendor: true,
+    updatable: false,
+
+    binaries: [
+        "android.hardware.security.authgraph-service.nonsecure",
+    ],
+    prebuilts: [
+        "authgraph.rc",
+        "authgraph.xml",
+    ],
+}
diff --git a/security/authgraph/default/apex_file_contexts b/security/authgraph/default/apex_file_contexts
new file mode 100644
index 0000000..9a54613
--- /dev/null
+++ b/security/authgraph/default/apex_file_contexts
@@ -0,0 +1,3 @@
+(/.*)?                                          u:object_r:vendor_file:s0
+/etc(/.*)?                                      u:object_r:vendor_configs_file:s0
+/bin/hw/android\.hardware\.security\.authgraph-service\.nonsecure  u:object_r:hal_authgraph_default_exec:s0
diff --git a/security/authgraph/default/apex_manifest.json b/security/authgraph/default/apex_manifest.json
new file mode 100644
index 0000000..0723846
--- /dev/null
+++ b/security/authgraph/default/apex_manifest.json
@@ -0,0 +1,4 @@
+{
+    "name": "com.android.hardware.security.authgraph",
+    "version": 1
+}
\ No newline at end of file
diff --git a/security/authgraph/default/authgraph.rc b/security/authgraph/default/authgraph.rc
index 0222994..2d07542 100644
--- a/security/authgraph/default/authgraph.rc
+++ b/security/authgraph/default/authgraph.rc
@@ -1,4 +1,4 @@
-service vendor.authgraph /vendor/bin/hw/android.hardware.security.authgraph-service.nonsecure
+service vendor.authgraph /apex/com.android.hardware.security.authgraph/bin/hw/android.hardware.security.authgraph-service.nonsecure
     interface aidl android.hardware.security.authgraph.IAuthGraph/nonsecure
     class hal
     user nobody
diff --git a/security/authgraph/default/src/fuzzer.rs b/security/authgraph/default/src/fuzzer.rs
index 6a9cfdd..d401777 100644
--- a/security/authgraph/default/src/fuzzer.rs
+++ b/security/authgraph/default/src/fuzzer.rs
@@ -25,7 +25,7 @@
 use std::sync::{Arc, Mutex};
 
 fuzz_target!(|data: &[u8]| {
-    let local_ta = LocalTa::new();
+    let local_ta = LocalTa::new().expect("Failed to create an AuthGraph local TA.");
     let service = AuthGraphService::new_as_binder(Arc::new(Mutex::new(local_ta)));
     fuzz_service(&mut service.as_binder(), data);
 });
diff --git a/security/authgraph/default/src/lib.rs b/security/authgraph/default/src/lib.rs
index 4cd0cb7..14741aa 100644
--- a/security/authgraph/default/src/lib.rs
+++ b/security/authgraph/default/src/lib.rs
@@ -18,36 +18,11 @@
 
 use authgraph_boringssl as boring;
 use authgraph_core::{
-    key::MillisecondsSinceEpoch,
+    error, keyexchange,
     ta::{AuthGraphTa, Role},
-    traits,
 };
 use authgraph_hal::channel::SerializedChannel;
 use std::sync::{Arc, Mutex};
-use std::time::Instant;
-
-/// Monotonic clock with an epoch that starts at the point of construction.
-/// (This makes it unsuitable for use outside of testing, because the epoch
-/// will not match that of any other component.)
-pub struct StdClock(Instant);
-
-impl Default for StdClock {
-    fn default() -> Self {
-        Self(Instant::now())
-    }
-}
-
-impl traits::MonotonicClock for StdClock {
-    fn now(&self) -> MillisecondsSinceEpoch {
-        let millis: i64 = self
-            .0
-            .elapsed()
-            .as_millis()
-            .try_into()
-            .expect("failed to fit timestamp in i64");
-        MillisecondsSinceEpoch(millis)
-    }
-}
 
 /// Implementation of the AuthGraph TA that runs locally in-process (and which is therefore
 /// insecure).
@@ -57,16 +32,17 @@
 
 impl LocalTa {
     /// Create a new instance.
-    pub fn new() -> Self {
-        Self {
+    pub fn new() -> Result<Self, error::Error> {
+        Ok(Self {
             ta: Arc::new(Mutex::new(AuthGraphTa::new(
-                boring::trait_impls(
+                keyexchange::AuthGraphParticipant::new(
+                    boring::crypto_trait_impls(),
                     Box::<boring::test_device::AgDevice>::default(),
-                    Some(Box::new(StdClock::default())),
-                ),
+                    keyexchange::MAX_OPENED_SESSIONS,
+                )?,
                 Role::Both,
             ))),
-        }
+        })
     }
 }
 
diff --git a/security/authgraph/default/src/main.rs b/security/authgraph/default/src/main.rs
index 873eb4e..81f2dd6 100644
--- a/security/authgraph/default/src/main.rs
+++ b/security/authgraph/default/src/main.rs
@@ -65,7 +65,8 @@
     binder::ProcessState::start_thread_pool();
 
     // Register the service
-    let local_ta = LocalTa::new();
+    let local_ta =
+        LocalTa::new().map_err(|e| format!("Failed to create the TA because: {e:?}"))?;
     let service = service::AuthGraphService::new_as_binder(Arc::new(Mutex::new(local_ta)));
     let service_name = format!("{}/{}", SERVICE_NAME, SERVICE_INSTANCE);
     binder::add_service(&service_name, service.as_binder()).map_err(|e| {
diff --git a/security/keymint/aidl/android/hardware/security/keymint/Tag.aidl b/security/keymint/aidl/android/hardware/security/keymint/Tag.aidl
index aa7bf28..be29f59 100644
--- a/security/keymint/aidl/android/hardware/security/keymint/Tag.aidl
+++ b/security/keymint/aidl/android/hardware/security/keymint/Tag.aidl
@@ -974,8 +974,8 @@
      * time in milliseconds.  This value is used when generating attestation or self signed
      * certificates.  ErrorCode::MISSING_NOT_BEFORE must be returned if this tag is not provided if
      * this tag is not provided to generateKey or importKey.  For importWrappedKey, there is no way
-     * to specify the value of this tag for the wrapped key, so a value of 0 must be used for
-     * certificate generation.
+     * to specify the value of this tag for a wrapped asymmetric key, so a value of 0 is suggested
+     * for certificate generation.
      */
     CERTIFICATE_NOT_BEFORE = TagType.DATE | 1008,
 
@@ -983,8 +983,9 @@
      * Tag::CERTIFICATE_NOT_AFTER the end of the validity of the certificate in UNIX epoch time in
      * milliseconds.  This value is used when generating attestation or self signed certificates.
      * ErrorCode::MISSING_NOT_AFTER must be returned if this tag is not provided to generateKey or
-     * importKey.  For importWrappedKey, there is no way to specify the value of this tag for the
-     * wrapped key, so a value of 253402300799000 is used for certificate generation.
+     * importKey.  For importWrappedKey, there is no way to specify the value of this tag for a
+     * wrapped asymmetric key, so a value of 253402300799000 is suggested for certificate
+     * generation.
      */
     CERTIFICATE_NOT_AFTER = TagType.DATE | 1009,
 
diff --git a/security/keymint/aidl/vts/functional/KeyMintAidlTestBase.cpp b/security/keymint/aidl/vts/functional/KeyMintAidlTestBase.cpp
index 822770d..d3f6ae3 100644
--- a/security/keymint/aidl/vts/functional/KeyMintAidlTestBase.cpp
+++ b/security/keymint/aidl/vts/functional/KeyMintAidlTestBase.cpp
@@ -1792,6 +1792,12 @@
     std::string empty_boot_key(32, '\0');
     std::string verified_boot_key_str((const char*)verified_boot_key.data(),
                                       verified_boot_key.size());
+    if (get_vsr_api_level() >= __ANDROID_API_V__) {
+        // The attestation should contain the SHA-256 hash of the verified boot
+        // key.  However, this was not checked for earlier versions of the KeyMint
+        // HAL so only be strict for VSR-V and above.
+        EXPECT_LE(verified_boot_key.size(), 32);
+    }
     EXPECT_NE(property_get("ro.boot.verifiedbootstate", property_value, ""), 0);
     if (!strcmp(property_value, "green")) {
         EXPECT_EQ(verified_boot_state, VerifiedBoot::VERIFIED);
diff --git a/security/keymint/aidl/vts/functional/KeyMintTest.cpp b/security/keymint/aidl/vts/functional/KeyMintTest.cpp
index a8f17dd..d4adab5 100644
--- a/security/keymint/aidl/vts/functional/KeyMintTest.cpp
+++ b/security/keymint/aidl/vts/functional/KeyMintTest.cpp
@@ -4123,13 +4123,13 @@
  * when the EC_CURVE is not explicitly specified.
  */
 TEST_P(ImportKeyTest, EcdsaSuccessCurveNotSpecified) {
-    if (AidlVersion() < 4) {
+    if (get_vsr_api_level() < __ANDROID_API_V__) {
         /*
-         * The KeyMint spec before V4 was not clear as to whether EC_CURVE was optional on import of
-         * EC keys. However, this was not checked at the time so we can only be strict about
-         * checking this for implementations of KeyMint version 4 and above.
+         * The KeyMint spec was previously not clear as to whether EC_CURVE was optional on import
+         * of EC keys. However, this was not checked at the time so we can only be strict about
+         * checking this for implementations at VSR-V or later.
          */
-        GTEST_SKIP() << "Skipping EC_CURVE on import only strict since KeyMint v4";
+        GTEST_SKIP() << "Skipping EC_CURVE on import only strict >= VSR-V";
     }
 
     ASSERT_EQ(ErrorCode::OK, ImportKey(AuthorizationSetBuilder()
diff --git a/security/keymint/aidl/vts/functional/SecureElementProvisioningTest.cpp b/security/keymint/aidl/vts/functional/SecureElementProvisioningTest.cpp
index c9a156d..9f7322a 100644
--- a/security/keymint/aidl/vts/functional/SecureElementProvisioningTest.cpp
+++ b/security/keymint/aidl/vts/functional/SecureElementProvisioningTest.cpp
@@ -114,6 +114,12 @@
         const auto& vbKey = rot->asArray()->get(pos++);
         ASSERT_TRUE(vbKey);
         ASSERT_TRUE(vbKey->asBstr());
+        if (get_vsr_api_level() >= __ANDROID_API_V__) {
+            // The attestation should contain the SHA-256 hash of the verified boot
+            // key.  However, this not was checked for earlier versions of the KeyMint
+            // HAL so only be strict for VSR-V and above.
+            ASSERT_LE(vbKey->asBstr()->value().size(), 32);
+        }
 
         const auto& deviceLocked = rot->asArray()->get(pos++);
         ASSERT_TRUE(deviceLocked);
diff --git a/security/keymint/support/remote_prov_utils.cpp b/security/keymint/support/remote_prov_utils.cpp
index 34f7ce4..6edbfc1 100644
--- a/security/keymint/support/remote_prov_utils.cpp
+++ b/security/keymint/support/remote_prov_utils.cpp
@@ -520,6 +520,15 @@
                    std::to_string(info.versionNumber) + ").";
         }
     }
+    // Bypasses the device info validation since the device info in AVF is currently
+    // empty. Check b/299256925 for more information.
+    //
+    // TODO(b/300911665): This check is temporary and will be replaced once the markers
+    // on the DICE chain become available. We need to determine if the CSR is from the
+    // RKP VM using the markers on the DICE chain.
+    if (info.uniqueId == "AVF Remote Provisioning 1") {
+        return std::move(parsed);
+    }
 
     std::string error;
     std::string tmp;
diff --git a/security/rkp/README.md b/security/rkp/README.md
index 15ea817..71f70cb 100644
--- a/security/rkp/README.md
+++ b/security/rkp/README.md
@@ -190,3 +190,30 @@
 *   [RpcHardwareInfo](https://cs.android.com/android/platform/superproject/+/master:hardware/interfaces/security/rkp/aidl/android/hardware/security/keymint/RpcHardwareInfo.aidl)
 *   [DeviceInfo](https://cs.android.com/android/platform/superproject/+/master:hardware/interfaces/security/rkp/aidl/android/hardware/security/keymint/DeviceInfo.aidl)
 
+### Support for Android Virtualization Framework
+
+The Android Virtualization Framwork (AVF) relies on RKP to provision keys for VMs. A
+privileged vm, the RKP VM, is reponsible for generating and managing the keys for client
+VMs that run virtualized workloads. See the following for more background information on the
+RKP VM:
+*    [rkp-vm]: https://android.googlesource.com/platform/packages/modules/Virtualization/+/main/service_vm/README.md#rkp-vm-remote-key-provisioning-virtual-machine
+*    [rkp-service]: https://source.android.com/docs/core/ota/modular-system/remote-key-provisioning#stack-architecture
+
+It is important to distinquish the RKP VM from other components, such as KeyMint. An
+[RKP VM marker](https://pigweed.googlesource.com/open-dice/+/HEAD/docs/android.md#configuration-descriptor)
+(key `-70006) is used for this purpose. The existence or absence of this marker is used to
+identify the type of component decribed by a given DICE chain.
+
+The following describes which certificate types may be request based on the RKP VM marker:
+1. "rkp-vm": If a DICE chain has zero or more certificates without the RKP VM
+   marker followed by one or more certificates with the marker, then that chain
+   describes an RKP VM. If there are further certificates without the RKP VM
+   marker, then the chain does not describe an RKP VM.
+
+   Implementations must include the first RPK VM marker as early as possible
+   after the point of divergence between TEE and non-TEE components in the DICE
+   chain, prior to loading the Android Bootloader (ABL).
+2. "widevine" or "keymint": If there are no certificates with the RKP VM
+   marker then it describes a TEE component.
+3. None: Any component described by a DICE chain that does not match the above
+   two categories.
\ No newline at end of file
diff --git a/security/rkp/aidl/android/hardware/security/keymint/generateCertificateRequestV2.cddl b/security/rkp/aidl/android/hardware/security/keymint/generateCertificateRequestV2.cddl
index 61404d4..3c43238 100644
--- a/security/rkp/aidl/android/hardware/security/keymint/generateCertificateRequestV2.cddl
+++ b/security/rkp/aidl/android/hardware/security/keymint/generateCertificateRequestV2.cddl
@@ -14,8 +14,9 @@
 ; be extended without requiring a version bump of the HAL. Custom certificate types may
 ; be used, but the provisioning server may reject the request for an unknown certificate
 ; type. The currently defined certificate types are:
-;  - "widevine"
-;  - "keymint"
+;  * "widevine" -- Widevine content protection system
+;  * "keymint"  -- KeyMint HAL
+;  * "rkp-vm"   -- See "Support for Android Virtualization Framework" in the README.md file.
 CertificateType = tstr
 
 KeysToSign = [ * PublicKey ]   ; Please see PublicKey.cddl for the PublicKey definition.
@@ -112,6 +113,7 @@
     ? -70003 : int / tstr,                   ; Component version
     ? -70004 : null,                         ; Resettable
     ? -70005 : uint,                         ; Security version
+    ? -70006 : null,                         ; RKP VM marker
 }
 
 ; Each entry in the DICE chain is a DiceChainEntryPayload signed by the key from the previous
diff --git a/security/rkp/aidl/vts/functional/VtsRemotelyProvisionedComponentTests.cpp b/security/rkp/aidl/vts/functional/VtsRemotelyProvisionedComponentTests.cpp
index 62463eb..a1de93e 100644
--- a/security/rkp/aidl/vts/functional/VtsRemotelyProvisionedComponentTests.cpp
+++ b/security/rkp/aidl/vts/functional/VtsRemotelyProvisionedComponentTests.cpp
@@ -55,6 +55,8 @@
 
 constexpr uint8_t MIN_CHALLENGE_SIZE = 0;
 constexpr uint8_t MAX_CHALLENGE_SIZE = 64;
+const string RKP_VM_INSTANCE_NAME =
+        "android.hardware.security.keymint.IRemotelyProvisionedComponent/avf";
 
 #define INSTANTIATE_REM_PROV_AIDL_TEST(name)                                         \
     GTEST_ALLOW_UNINSTANTIATED_PARAMETERIZED_TEST(name);                             \
@@ -181,7 +183,12 @@
             provisionable_ = IRemotelyProvisionedComponent::fromBinder(binder);
         }
         ASSERT_NE(provisionable_, nullptr);
-        ASSERT_TRUE(provisionable_->getHardwareInfo(&rpcHardwareInfo).isOk());
+        auto status = provisionable_->getHardwareInfo(&rpcHardwareInfo);
+        if (GetParam() == RKP_VM_INSTANCE_NAME &&
+            status.getExceptionCode() == EX_UNSUPPORTED_OPERATION) {
+            GTEST_SKIP() << "The RKP VM is not supported on this system.";
+        }
+        ASSERT_TRUE(status.isOk());
     }
 
     static vector<string> build_params() {
@@ -207,7 +214,11 @@
         ASSERT_NE(rpc, nullptr);
 
         RpcHardwareInfo hwInfo;
-        ASSERT_TRUE(rpc->getHardwareInfo(&hwInfo).isOk());
+        auto status = rpc->getHardwareInfo(&hwInfo);
+        if (hal == RKP_VM_INSTANCE_NAME && status.getExceptionCode() == EX_UNSUPPORTED_OPERATION) {
+            GTEST_SKIP() << "The RKP VM is not supported on this system.";
+        }
+        ASSERT_TRUE(status.isOk());
 
         if (hwInfo.versionNumber >= VERSION_WITH_UNIQUE_ID_SUPPORT) {
             ASSERT_TRUE(hwInfo.uniqueId);
diff --git a/security/secretkeeper/aidl/Android.bp b/security/secretkeeper/aidl/Android.bp
new file mode 100644
index 0000000..c77d299
--- /dev/null
+++ b/security/secretkeeper/aidl/Android.bp
@@ -0,0 +1,36 @@
+// Copyright (C) 2023 The Android Open Source Project
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//      http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+package {
+    default_applicable_licenses: ["Android-Apache-2.0"],
+}
+
+aidl_interface {
+    name: "android.hardware.security.secretkeeper",
+    vendor_available: true,
+    srcs: ["android/hardware/security/secretkeeper/*.aidl"],
+    stability: "vintf",
+    backend: {
+        ndk: {
+            enabled: true,
+        },
+        rust: {
+            enabled: true,
+            apex_available: [
+                "//apex_available:platform",
+                "com.android.virt",
+            ],
+        },
+    },
+}
diff --git a/security/secretkeeper/aidl/aidl_api/android.hardware.security.secretkeeper/current/android/hardware/security/secretkeeper/ISecretkeeper.aidl b/security/secretkeeper/aidl/aidl_api/android.hardware.security.secretkeeper/current/android/hardware/security/secretkeeper/ISecretkeeper.aidl
new file mode 100644
index 0000000..2eb33c5
--- /dev/null
+++ b/security/secretkeeper/aidl/aidl_api/android.hardware.security.secretkeeper/current/android/hardware/security/secretkeeper/ISecretkeeper.aidl
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2023 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.security.secretkeeper;
+@VintfStability
+interface ISecretkeeper {
+  byte[] processSecretManagementRequest(in byte[] request);
+}
diff --git a/security/secretkeeper/aidl/android/hardware/security/secretkeeper/ISecretkeeper.aidl b/security/secretkeeper/aidl/android/hardware/security/secretkeeper/ISecretkeeper.aidl
new file mode 100644
index 0000000..af715a9
--- /dev/null
+++ b/security/secretkeeper/aidl/android/hardware/security/secretkeeper/ISecretkeeper.aidl
@@ -0,0 +1,74 @@
+/*
+ * Copyright (C) 2023 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.security.secretkeeper;
+
+@VintfStability
+/**
+ * Secretkeeper service definition.
+ *
+ * An ISecretkeeper instance provides secure storage of secrets on behalf of other components in
+ * Android, in particular for protected virtual machine instances. From the perspective of security
+ * privilege, Secretkeeper must be implemented in an environment with privilege higher than any of
+ * its clients. Since AVF based protected Virtual Machines are one set of its clients, the
+ * implementation of ISecretkeeper should live in a secure environment, such as:
+ * - A trusted execution environment such as ARM TrustZone.
+ * - A completely separate, purpose-built and certified secure CPU.
+ *
+ * TODO(b/291224769): Extend the HAL interface to include:
+ * 1. Session setup api: This is used to perform cryptographic operations that allow shared keys to
+ * be exchanged between session participants, typically (but not necessarily) a pVM instance and
+ * Secretkeeper. This session setup is based on public key cryptography.
+ * 2. Dice policy operation - These allow sealing of the secrets with a class of Dice chains.
+ * Typical operations are (securely) updating the dice policy sealing the Secrets above. These
+ * operations are core to AntiRollback protected secrets - ie, ensuring secrets of a pVM are only
+ * accessible to same or higher versions of the images.
+ * 3. Maintenance api: This is required for removing the Secretkeeper entries for obsolete pvMs.
+ */
+interface ISecretkeeper {
+    /**
+     * processSecretManagementRequest method is used for interacting with the Secret Management API
+     *
+     * Secret Management API: The clients can use this API to store (& get) 32 bytes of data.
+     * The API is a CBOR based protocol, which follows request/response model.
+     * See SecretManagement.cddl for the API spec.
+     *
+     * Further, the requests (from client) & responses (from service) must be encrypted into
+     * ProtectedRequestPacket & ProtectedResponsePacket using symmetric keys agreed between
+     * the client & service. This cryptographic protection is required because the messages are
+     * ferried via Android, which is allowed to be outside the TCB of clients (for example protected
+     * Virtual Machines). For this, service (& client) must implement a key exchange protocol, which
+     * is critical for establishing the secure channel.
+     *
+     * Secretkeeper database should guarantee the following properties:
+     * 1. Confidentiality: No entity (of security privilege lower than Secretkeeper) should
+     *    be able to get a client's data in clear.
+     *
+     * 2. Integrity: The data is protected against malicious Android OS tampering with database.
+     *    ie, if Android (userspace & kernel) tampers with the client's secret, the Secretkeeper
+     *    service must be able to detect it & return error when clients requests for their secrets.
+     *    Note: the integrity requirements also include Antirollback protection ie, reverting the
+     *    database into an old state should be detected.
+     *
+     * 3. The data is persistent across device boot.
+     *    Note: Denial of service is not in scope. A malicious Android may be able to delete data,
+     *    but for ideal Android, the data should be persistent.
+     *
+     * @param CBOR-encoded ProtectedRequestPacket. See SecretManagement.cddl for its definition.
+     * @return CBOR-encoded ProtectedResponsePacket. See SecretManagement.cddl for its definition
+     */
+    byte[] processSecretManagementRequest(in byte[] request);
+}
diff --git a/security/secretkeeper/aidl/android/hardware/security/secretkeeper/SecretManagement.cddl b/security/secretkeeper/aidl/android/hardware/security/secretkeeper/SecretManagement.cddl
new file mode 100644
index 0000000..5631937
--- /dev/null
+++ b/security/secretkeeper/aidl/android/hardware/security/secretkeeper/SecretManagement.cddl
@@ -0,0 +1,116 @@
+; CDDL for the Secret Management API.
+; Also see processSecretManagementRequest method in ISecretkeeper.aidl
+
+; ProtectedRequestPacket is used by client for accessing Secret Management API
+; in Secretkeeper service. The service returns ProtectedResponsePacket of the corresponding type.
+
+; ProtectedRequestPacket & ProtectedResponsePacket are encrypted wrappers
+; on RequestPacket & ResponsePacket using symmetric keys agreed between Secretkeeper & clients
+; (these are referred to as KeySourceToSink & KeySinkToSource)
+;
+; The API operation required is encoded using 'Opcode', the arguments using 'Params'
+; and returned values as 'Result'.
+
+ProtectedRequestPacket =
+        ProtectedGetVersionRequest / ProtectedStoreSecretRequest / ProtectedGetSecretRequest
+ProtectedResponsePacket =
+        ProtectedGetVersionResponse / ProtectedStoreSecretResponse / ProtectedGetSecretResponse
+
+ProtectedGetVersionRequest = ProtectedRequestPacket<GetVersionRequestPacket>
+ProtectedGetVersionResponse = ProtectedResponsePacket<GetVersionResponsePacket>
+ProtectedStoreSecretRequest = ProtectedRequestPacket<StoreSecretRequestPacket>
+ProtectedStoreSecretResponse = ProtectedResponsePacket<StoreSecretResponsePacket>
+ProtectedGetSecretRequest = ProtectedRequestPacket<GetSecretRequestPacket>
+ProtectedGetSecretResponse = ProtectedResponsePacket<GetSecretResponsePacket>
+
+GetVersionRequestPacket = RequestPacket<GetVersionOpcode, GetVersionParams>
+GetVersionResponsePacket = ResponsePacket<GetVersionResult>
+StoreSecretRequestPacket = RequestPacket<StoreSecretOpcode, StoreSecretParams>
+StoreSecretResponsePacket = ResponsePacket<StoreSecretResult>
+GetSecretRequestPacket = RequestPacket<GetOpcode, GetSecretParams>
+GetSecretResponsePacket = ResponsePacket<GetSecretResult>
+
+RequestPacket<Opcode, Params> = [
+    Opcode,
+    Params
+]
+ResponsePacket<Result> = ResponsePacketError / ResponsePacketSuccess<Result>
+
+ResponsePacketSuccess = [
+    0,                          ; Indicates successful Response
+    result : Result
+]
+ResponsePacketError = [
+    error_code: ErrorCode,      ; Indicate the error
+    error_message: tstr         ; Additional human-readable context
+]
+
+Opcode = &(
+    GetVersionOpcode: 1,     ; Get version of the SecretManagement API
+    StoreSecretOpcode: 2,          ; Store a secret
+    GetSecretOpcode: 3,            ; Get the secret
+)
+
+GetVersionParams = ()
+GetVersionResult = (version : uint)
+
+StoreSecretParams = (
+    id : bstr .size 64              ; Unique identifier of the secret
+    secret : bstr .size 32,
+    sealing_policy : bstr .cbor DicePolicy,    ; See DicePolicy.cddl for definition of DicePolicy
+)
+StoreSecretResult = ()
+
+GetSecretParams = (
+    id : bstr .size 64              ; Unique identifier of the secret
+    ; Use this to update the sealing policy associated with a secret during GetSecret operation.
+    updated_sealing_policy : bstr .cbor DicePolicy / nil,
+)
+GetSecretResult = (secret : bstr .size 32)
+
+
+ProtectedRequestPacket<Payload, Key> = CryptoPayload<Payload, KeySourceToSink>
+ProtectedResponsePacket<Payload, Key> = ProtectedResponseError
+                                    / ProtectedResponseSuccess<Payload>
+
+ProtectedResponseSuccess<Payload> = [
+    0,                                ; Indicates successful crypto operations. Note: Payload
+                                                    ; may contain Error from functional layer.
+    message: CryptoPayload<Payload, KeySinkToSource>         ; message is the encrypted payload
+]
+
+ProtectedResponseError = [
+    error_code: CryptoErrorCode,           ; Indicates the error. This is in cleartext & will be
+                                           ; visible to Android. These are errors from crypto
+                                           ; layer & indicates the request could not even be read
+    message: tstr                          ; Additional human-readable context
+]
+
+CryptoPayload<Payload, Key> = [         ; COSE_Encrypt0 (untagged), [RFC 9052 s5.2]
+    protected: bstr .cbor {
+        1 : 3,                  ; Algorithm: AES-GCM mode w/ 256-bit key, 128-bit tag
+        4 : bstr                ; key identifier, uniquely identifies the session
+                                ; TODO(b/291228560): Refer to the Key Exchange spec.
+    },
+    unprotected: {
+        5 : bstr .size 12          ; IV
+    },
+    ciphertext : bstr     ; AES-GCM-256(Key, bstr .cbor Payload)
+                          ; AAD for the encryption is CBOR-serialized
+                          ; Enc_structure (RFC 9052 s5.3) with empty external_aad.
+]
+
+; TODO(b/291224769): Create a more exhaustive set of CryptoErrorCode
+CryptoErrorCode = &(
+    CryptoErrorCode_SessionExpired: 1,
+)
+
+; TODO(b/291224769): Create a more exhaustive set of ErrorCodes
+ErrorCode = &(
+    ; Use this as if no other error code can be used.
+    ErrorCode_UnexpectedServerError: 1,
+    ; Indicate the Request was malformed & hence couldnt be served.
+    ErrorCode_RequestMalformed: 2,
+)
+
+; INCLUDE DicePolicy.cddl for: DicePolicy
\ No newline at end of file
diff --git a/security/secretkeeper/aidl/vts/Android.bp b/security/secretkeeper/aidl/vts/Android.bp
new file mode 100644
index 0000000..6818298
--- /dev/null
+++ b/security/secretkeeper/aidl/vts/Android.bp
@@ -0,0 +1,35 @@
+/*
+ * Copyright (C) 2023 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package {
+    default_applicable_licenses: ["Android-Apache-2.0"],
+}
+
+rust_test {
+    name: "VtsSecretkeeperTargetTest",
+    srcs: ["secretkeeper_test_client.rs"],
+    test_suites: [
+        "general-tests",
+        "vts",
+    ],
+    rustlibs: [
+        "libsecretkeeper_comm_nostd",
+        "android.hardware.security.secretkeeper-V1-rust",
+        "libbinder_rs",
+        "liblog_rust",
+    ],
+    require_root: true,
+}
diff --git a/security/secretkeeper/aidl/vts/secretkeeper_test_client.rs b/security/secretkeeper/aidl/vts/secretkeeper_test_client.rs
new file mode 100644
index 0000000..28923f7
--- /dev/null
+++ b/security/secretkeeper/aidl/vts/secretkeeper_test_client.rs
@@ -0,0 +1,109 @@
+/*
+ * Copyright (C) 2023 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#[cfg(test)]
+use binder::StatusCode;
+use log::warn;
+use secretkeeper_comm::data_types::error::SecretkeeperError;
+use secretkeeper_comm::data_types::request::Request;
+use secretkeeper_comm::data_types::request_response_impl::{
+    GetVersionRequest, GetVersionResponse,
+};
+use secretkeeper_comm::data_types::response::Response;
+use secretkeeper_comm::data_types::packet::{ResponsePacket, ResponseType};
+use android_hardware_security_secretkeeper::aidl::android::hardware::security::secretkeeper::ISecretkeeper::ISecretkeeper;
+
+const SECRETKEEPER_IDENTIFIER: &str =
+    "android.hardware.security.secretkeeper.ISecretkeeper/nonsecure";
+const CURRENT_VERSION: u64 = 1;
+
+fn get_connection() -> Option<binder::Strong<dyn ISecretkeeper>> {
+    match binder::get_interface(SECRETKEEPER_IDENTIFIER) {
+        Ok(sk) => Some(sk),
+        Err(StatusCode::NAME_NOT_FOUND) => None,
+        Err(e) => {
+            panic!(
+                "unexpected error while fetching connection to Secretkeeper {:?}",
+                e
+            );
+        }
+    }
+}
+
+// TODO(b/2797757): Add tests that match different HAL defined objects (like request/response)
+// with expected bytes.
+
+#[test]
+fn secret_management_get_version() {
+    let secretkeeper = match get_connection() {
+        Some(sk) => sk,
+        None => {
+            warn!("Secretkeeper HAL is unavailable, skipping test");
+            return;
+        }
+    };
+    let request = GetVersionRequest {};
+    let request_packet = request.serialize_to_packet();
+    let request_bytes = request_packet.into_bytes().unwrap();
+
+    // TODO(b/291224769) The request will need to be encrypted & response need to be decrypted
+    // with key & related artifacts pre-shared via Authgraph Key Exchange HAL.
+
+    let response_bytes = secretkeeper
+        .processSecretManagementRequest(&request_bytes)
+        .unwrap();
+
+    let response_packet = ResponsePacket::from_bytes(&response_bytes).unwrap();
+    assert_eq!(
+        response_packet.response_type().unwrap(),
+        ResponseType::Success
+    );
+    let get_version_response =
+        *GetVersionResponse::deserialize_from_packet(response_packet).unwrap();
+    assert_eq!(get_version_response.version(), CURRENT_VERSION);
+}
+
+#[test]
+fn secret_management_malformed_request() {
+    let secretkeeper = match get_connection() {
+        Some(sk) => sk,
+        None => {
+            warn!("Secretkeeper HAL is unavailable, skipping test");
+            return;
+        }
+    };
+    let request = GetVersionRequest {};
+    let request_packet = request.serialize_to_packet();
+    let mut request_bytes = request_packet.into_bytes().unwrap();
+
+    // Deform the request
+    request_bytes[0] = !request_bytes[0];
+
+    // TODO(b/291224769) The request will need to be encrypted & response need to be decrypted
+    // with key & related artifacts pre-shared via Authgraph Key Exchange HAL.
+
+    let response_bytes = secretkeeper
+        .processSecretManagementRequest(&request_bytes)
+        .unwrap();
+
+    let response_packet = ResponsePacket::from_bytes(&response_bytes).unwrap();
+    assert_eq!(
+        response_packet.response_type().unwrap(),
+        ResponseType::Error
+    );
+    let err = *SecretkeeperError::deserialize_from_packet(response_packet).unwrap();
+    assert_eq!(err, SecretkeeperError::RequestMalformed);
+}
diff --git a/security/secretkeeper/default/Android.bp b/security/secretkeeper/default/Android.bp
new file mode 100644
index 0000000..1c39fa6
--- /dev/null
+++ b/security/secretkeeper/default/Android.bp
@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) 2023 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package {
+    default_applicable_licenses: ["Android-Apache-2.0"],
+}
+
+rust_binary {
+    name: "android.hardware.security.secretkeeper-service.nonsecure",
+    relative_install_path: "hw",
+    vendor: true,
+    init_rc: ["secretkeeper.rc"],
+    vintf_fragments: ["secretkeeper.xml"],
+    rustlibs: [
+        "android.hardware.security.secretkeeper-V1-rust",
+        "libandroid_logger",
+        "libbinder_rs",
+        "liblog_rust",
+        "libsecretkeeper_comm_nostd",
+    ],
+    srcs: [
+        "src/main.rs",
+    ],
+}
diff --git a/security/secretkeeper/default/secretkeeper.rc b/security/secretkeeper/default/secretkeeper.rc
new file mode 100644
index 0000000..f39f9b7
--- /dev/null
+++ b/security/secretkeeper/default/secretkeeper.rc
@@ -0,0 +1,5 @@
+service vendor.secretkeeper /vendor/bin/hw/android.hardware.security.secretkeeper-service.nonsecure
+    interface aidl android.hardware.security.secretkeeper.ISecretkeeper/nonsecure
+    class hal
+    user nobody
+    group nobody
diff --git a/security/secretkeeper/default/secretkeeper.xml b/security/secretkeeper/default/secretkeeper.xml
new file mode 100644
index 0000000..40aebe0
--- /dev/null
+++ b/security/secretkeeper/default/secretkeeper.xml
@@ -0,0 +1,28 @@
+<manifest version="1.0" type="device">
+<!--
+/*
+** Copyright 2022, The Android Open Source Project.
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+
+    <hal format="aidl">
+        <name>android.hardware.security.secretkeeper</name>
+        <version>1</version>
+        <interface>
+            <name>ISecretkeeper</name>
+            <instance>nonsecure</instance>
+        </interface>
+    </hal>
+</manifest>
diff --git a/security/secretkeeper/default/src/main.rs b/security/secretkeeper/default/src/main.rs
new file mode 100644
index 0000000..2d367c5
--- /dev/null
+++ b/security/secretkeeper/default/src/main.rs
@@ -0,0 +1,121 @@
+/*
+ * Copyright (C) 2023 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+use binder::{BinderFeatures, Interface};
+use log::{error, info, Level};
+use secretkeeper_comm::data_types::error::SecretkeeperError;
+use secretkeeper_comm::data_types::packet::{RequestPacket, ResponsePacket};
+use secretkeeper_comm::data_types::request::Request;
+use secretkeeper_comm::data_types::request_response_impl::{
+    GetVersionRequest, GetVersionResponse, Opcode,
+};
+use secretkeeper_comm::data_types::response::Response;
+
+use android_hardware_security_secretkeeper::aidl::android::hardware::security::secretkeeper::ISecretkeeper::{
+    BnSecretkeeper, BpSecretkeeper, ISecretkeeper,
+};
+
+const CURRENT_VERSION: u64 = 1;
+
+#[derive(Debug, Default)]
+pub struct NonSecureSecretkeeper;
+
+impl Interface for NonSecureSecretkeeper {}
+
+impl ISecretkeeper for NonSecureSecretkeeper {
+    fn processSecretManagementRequest(&self, request: &[u8]) -> binder::Result<Vec<u8>> {
+        Ok(self.process_opaque_request(request))
+    }
+}
+
+impl NonSecureSecretkeeper {
+    // A set of requests to Secretkeeper are 'opaque' - encrypted bytes with inner structure
+    // described by CDDL. They need to be decrypted, deserialized and processed accordingly.
+    fn process_opaque_request(&self, request: &[u8]) -> Vec<u8> {
+        // TODO(b/291224769) The request will need to be decrypted & response need to be encrypted
+        // with key & related artifacts pre-shared via Authgraph Key Exchange HAL.
+        self.process_opaque_request_unhandled_error(request)
+            .unwrap_or_else(
+                // SecretkeeperError is also a valid 'Response', serialize to a response packet.
+                |sk_err| {
+                    Response::serialize_to_packet(&sk_err)
+                        .into_bytes()
+                        .expect("Panicking due to serialization failing")
+                },
+            )
+    }
+
+    fn process_opaque_request_unhandled_error(
+        &self,
+        request: &[u8],
+    ) -> Result<Vec<u8>, SecretkeeperError> {
+        let request_packet = RequestPacket::from_bytes(request).map_err(|e| {
+            error!("Failed to get Request packet from bytes: {:?}", e);
+            SecretkeeperError::RequestMalformed
+        })?;
+        let response_packet = match request_packet
+            .opcode()
+            .map_err(|_| SecretkeeperError::RequestMalformed)?
+        {
+            Opcode::GetVersion => Self::process_get_version_request(request_packet)?,
+            _ => todo!("TODO(b/291224769): Unimplemented operations"),
+        };
+
+        response_packet
+            .into_bytes()
+            .map_err(|_| SecretkeeperError::UnexpectedServerError)
+    }
+
+    fn process_get_version_request(
+        request: RequestPacket,
+    ) -> Result<ResponsePacket, SecretkeeperError> {
+        // Deserialization really just verifies the structural integrity of the request such
+        // as args being empty.
+        let _request = GetVersionRequest::deserialize_from_packet(request)
+            .map_err(|_| SecretkeeperError::RequestMalformed)?;
+        let response = GetVersionResponse::new(CURRENT_VERSION);
+        Ok(response.serialize_to_packet())
+    }
+}
+
+fn main() {
+    // Initialize Android logging.
+    android_logger::init_once(
+        android_logger::Config::default()
+            .with_tag("NonSecureSecretkeeper")
+            .with_min_level(Level::Info)
+            .with_log_id(android_logger::LogId::System),
+    );
+    // Redirect panic messages to logcat.
+    std::panic::set_hook(Box::new(|panic_info| {
+        error!("{}", panic_info);
+    }));
+
+    let service = NonSecureSecretkeeper::default();
+    let service_binder = BnSecretkeeper::new_binder(service, BinderFeatures::default());
+    let service_name = format!(
+        "{}/nonsecure",
+        <BpSecretkeeper as ISecretkeeper>::get_descriptor()
+    );
+    binder::add_service(&service_name, service_binder.as_binder()).unwrap_or_else(|e| {
+        panic!(
+            "Failed to register service {} because of {:?}.",
+            service_name, e
+        );
+    });
+    info!("Registered Binder service, joining threadpool.");
+    binder::ProcessState::join_thread_pool();
+}
diff --git a/tests/multithread/1.0/default/Multithread.h b/tests/multithread/1.0/default/Multithread.h
index 0d4a007..7df75cc 100644
--- a/tests/multithread/1.0/default/Multithread.h
+++ b/tests/multithread/1.0/default/Multithread.h
@@ -33,7 +33,7 @@
     std::condition_variable mCv;
     std::mutex mCvMutex;
 
-    static constexpr auto kTimeoutDuration = 100ms;
+    static constexpr auto kTimeoutDuration = 1000ms;
 };
 
 extern "C" IMultithread* HIDL_FETCH_IMultithread(const char* name);
diff --git a/threadnetwork/aidl/Android.bp b/threadnetwork/aidl/Android.bp
index c621b81..7e674e0 100644
--- a/threadnetwork/aidl/Android.bp
+++ b/threadnetwork/aidl/Android.bp
@@ -15,9 +15,6 @@
             apex_available: [
                 "//apex_available:platform",
                 "com.android.tethering",
-                // Keep the threadnetwork apex to make it buildable on udc-mainline-prod.
-                // TODO: remove it after moving ot-daemon into tethering.
-                "com.android.threadnetwork",
             ],
             min_sdk_version: "30",
         },