wifi: upgrade wifi interface to 1.5
Only a root interface is added and update relevant code.
Bug: 160834354
Test: atest VtsHalWifiV1_0TargetTest VtsHalWifiNanV1_0TargetTest VtsHalWifiApV1_0TargetTest \
VtsHalWifiV1_1TargetTest \
VtsHalWifiV1_2TargetTest VtsHalWifiNanV1_2TargetTest \
VtsHalWifiV1_3TargetTest \
VtsHalWifiApV1_4TargetTest VtsHalWifiNanV1_4TargetTest VtsHalWifiRttV1_4TargetTest
Change-Id: Ifdffa3a6996eca1d3c4b499258896cdfe5eb9c87
diff --git a/wifi/1.5/default/wifi_feature_flags.cpp b/wifi/1.5/default/wifi_feature_flags.cpp
new file mode 100644
index 0000000..151d473
--- /dev/null
+++ b/wifi/1.5/default/wifi_feature_flags.cpp
@@ -0,0 +1,166 @@
+/*
+ * Copyright (C) 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "wifi_feature_flags.h"
+
+namespace android {
+namespace hardware {
+namespace wifi {
+namespace V1_5 {
+namespace implementation {
+namespace feature_flags {
+
+using V1_0::ChipModeId;
+using V1_0::IfaceType;
+using V1_0::IWifiChip;
+
+/* The chip may either have a single mode supporting any number of combinations,
+ * or a fixed dual-mode (so it involves firmware loading to switch between
+ * modes) setting. If there is a need to support more modes, it needs to be
+ * implemented manually in WiFi HAL (see changeFirmwareMode in
+ * WifiChip::handleChipConfiguration).
+ *
+ * Supported combinations are defined in device's makefile, for example:
+ * WIFI_HAL_INTERFACE_COMBINATIONS := {{{STA, AP}, 1}, {{P2P, NAN}, 1}},
+ * WIFI_HAL_INTERFACE_COMBINATIONS += {{{STA}, 1}, {{AP}, 2}}
+ * What means:
+ * Interface combination 1: 1 STA or AP and 1 P2P or NAN concurrent iface
+ * operations.
+ * Interface combination 2: 1 STA and 2 AP concurrent iface operations.
+ *
+ * For backward compatibility, the following makefile flags can be used to
+ * generate combinations list:
+ * - WIFI_HIDL_FEATURE_DUAL_INTERFACE
+ * - WIFI_HIDL_FEATURE_DISABLE_AP
+ * - WIFI_HIDL_FEATURE_AWARE
+ * However, they are ignored if WIFI_HAL_INTERFACE_COMBINATIONS was provided.
+ * With WIFI_HIDL_FEATURE_DUAL_INTERFACE flag set, there is a single mode with
+ * two interface combinations:
+ * Interface Combination 1: Will support 1 STA and 1 P2P or NAN (optional)
+ * concurrent iface operations.
+ * Interface Combination 2: Will support 1 STA and 1 AP concurrent
+ * iface operations.
+ *
+ * The only dual-mode configuration supported is for alternating STA and AP
+ * mode, that may involve firmware reloading. In such case, there are 2 separate
+ * modes of operation with 1 interface combination each:
+ * Mode 1 (STA mode): Will support 1 STA and 1 P2P or NAN (optional)
+ * concurrent iface operations.
+ * Mode 2 (AP mode): Will support 1 AP iface operation.
+ *
+ * If Aware is enabled, the iface combination will be modified to support either
+ * P2P or NAN in place of just P2P.
+ */
+// clang-format off
+#ifdef WIFI_HAL_INTERFACE_COMBINATIONS
+constexpr ChipModeId kMainModeId = chip_mode_ids::kV3;
+#elif defined(WIFI_HIDL_FEATURE_DUAL_INTERFACE)
+// former V2 (fixed dual interface) setup expressed as V3
+constexpr ChipModeId kMainModeId = chip_mode_ids::kV3;
+# ifdef WIFI_HIDL_FEATURE_DISABLE_AP
+# ifdef WIFI_HIDL_FEATURE_AWARE
+// 1 STA + 1 of (P2P or NAN)
+# define WIFI_HAL_INTERFACE_COMBINATIONS {{{STA}, 1}, {{P2P, NAN}, 1}}
+# else
+// 1 STA + 1 P2P
+# define WIFI_HAL_INTERFACE_COMBINATIONS {{{STA}, 1}, {{P2P}, 1}}
+# endif
+# else
+# ifdef WIFI_HIDL_FEATURE_AWARE
+// (1 STA + 1 AP) or (1 STA + 1 of (P2P or NAN))
+# define WIFI_HAL_INTERFACE_COMBINATIONS {{{STA}, 1}, {{AP}, 1}},\
+ {{{STA}, 1}, {{P2P, NAN}, 1}}
+# else
+// (1 STA + 1 AP) or (1 STA + 1 P2P)
+# define WIFI_HAL_INTERFACE_COMBINATIONS {{{STA}, 1}, {{AP}, 1}},\
+ {{{STA}, 1}, {{P2P}, 1}}
+# endif
+# endif
+#else
+// V1 (fixed single interface, dual-mode chip)
+constexpr ChipModeId kMainModeId = chip_mode_ids::kV1Sta;
+# ifdef WIFI_HIDL_FEATURE_AWARE
+// 1 STA + 1 of (P2P or NAN)
+# define WIFI_HAL_INTERFACE_COMBINATIONS {{{STA}, 1}, {{P2P, NAN}, 1}}
+# else
+// 1 STA + 1 P2P
+# define WIFI_HAL_INTERFACE_COMBINATIONS {{{STA}, 1}, {{P2P}, 1}}
+# endif
+
+# ifndef WIFI_HIDL_FEATURE_DISABLE_AP
+# define WIFI_HAL_INTERFACE_COMBINATIONS_AP {{{AP}, 1}}
+# endif
+#endif
+// clang-format on
+
+/**
+ * Helper class to convert a collection of combination limits to a combination.
+ *
+ * The main point here is to simplify the syntax required by
+ * WIFI_HAL_INTERFACE_COMBINATIONS.
+ */
+struct ChipIfaceCombination
+ : public hidl_vec<IWifiChip::ChipIfaceCombinationLimit> {
+ ChipIfaceCombination(
+ const std::initializer_list<IWifiChip::ChipIfaceCombinationLimit> list)
+ : hidl_vec(list) {}
+
+ operator IWifiChip::ChipIfaceCombination() const { return {*this}; }
+
+ static hidl_vec<IWifiChip::ChipIfaceCombination> make_vec(
+ const std::initializer_list<ChipIfaceCombination> list) {
+ return hidl_vec<IWifiChip::ChipIfaceCombination>( //
+ std::begin(list), std::end(list));
+ }
+};
+
+#define STA IfaceType::STA
+#define AP IfaceType::AP
+#define P2P IfaceType::P2P
+#define NAN IfaceType::NAN
+static const std::vector<IWifiChip::ChipMode> kChipModes{
+ {kMainModeId,
+ ChipIfaceCombination::make_vec({WIFI_HAL_INTERFACE_COMBINATIONS})},
+#ifdef WIFI_HAL_INTERFACE_COMBINATIONS_AP
+ {chip_mode_ids::kV1Ap,
+ ChipIfaceCombination::make_vec({WIFI_HAL_INTERFACE_COMBINATIONS_AP})},
+#endif
+};
+#undef STA
+#undef AP
+#undef P2P
+#undef NAN
+
+#ifdef WIFI_HIDL_FEATURE_DISABLE_AP_MAC_RANDOMIZATION
+#pragma message \
+ "WIFI_HIDL_FEATURE_DISABLE_AP_MAC_RANDOMIZATION is deprecated; override " \
+ "'config_wifi_ap_randomization_supported' in " \
+ "frameworks/base/core/res/res/values/config.xml in the device overlay " \
+ "instead"
+#endif // WIFI_HIDL_FEATURE_DISABLE_AP_MAC_RANDOMIZATION
+
+WifiFeatureFlags::WifiFeatureFlags() {}
+
+std::vector<IWifiChip::ChipMode> WifiFeatureFlags::getChipModes() {
+ return kChipModes;
+}
+
+} // namespace feature_flags
+} // namespace implementation
+} // namespace V1_5
+} // namespace wifi
+} // namespace hardware
+} // namespace android