diff --git a/Android.bp b/Android.bp
index 2350c5f..25a147f 100644
--- a/Android.bp
+++ b/Android.bp
@@ -1,10 +1,28 @@
 // This is an autogenerated file, do not edit.
 subdirs = [
+    "audio/2.0",
+    "audio/common/2.0",
+    "audio/effect/2.0",
     "benchmarks/msgq/1.0",
     "bluetooth/1.0",
+    "biometrics/fingerprint/2.1",
+    "graphics/allocator/2.0",
+    "graphics/allocator/2.0/default",
+    "graphics/composer/2.1",
+    "graphics/composer/2.1/default",
+    "graphics/mapper/2.0",
+    "graphics/mapper/2.0/default",
+    "light/2.0",
+    "memtrack/1.0",
+    "memtrack/1.0/default",
     "nfc/1.0",
     "nfc/1.0/default",
+    "power/1.0",
+    "power/1.0/default",
     "radio/1.0",
+    "sensors/1.0",
+    "sensors/1.0/default",
+    "soundtrigger/2.0",
     "tests/bar/1.0",
     "tests/baz/1.0",
     "tests/expression/1.0",
@@ -12,6 +30,10 @@
     "tests/libhwbinder/1.0",
     "tests/msgq/1.0",
     "tests/pointer/1.0",
+    "thermal/1.0",
+    "thermal/1.0/default",
+    "vehicle/2.0",
+    "vibrator/1.0",
     "wifi/1.0",
     "wifi/supplicant/1.0",
 ]
diff --git a/audio/2.0/Android.bp b/audio/2.0/Android.bp
new file mode 100644
index 0000000..5edb042
--- /dev/null
+++ b/audio/2.0/Android.bp
@@ -0,0 +1,96 @@
+// This file is autogenerated by hidl-gen. Do not edit manually.
+
+genrule {
+    name: "android.hardware.audio@2.0_genc++",
+    tool: "hidl-gen",
+    cmd: "$tool -o $genDir -Lc++ -randroid.hardware:hardware/interfaces android.hardware.audio@2.0",
+    srcs: [
+        "types.hal",
+        "IDevice.hal",
+        "IDevicesFactory.hal",
+        "IPrimaryDevice.hal",
+        "IStream.hal",
+        "IStreamIn.hal",
+        "IStreamOut.hal",
+        "IStreamOutCallback.hal",
+    ],
+    out: [
+        "android/hardware/audio/2.0/types.cpp",
+        "android/hardware/audio/2.0/DeviceAll.cpp",
+        "android/hardware/audio/2.0/DevicesFactoryAll.cpp",
+        "android/hardware/audio/2.0/PrimaryDeviceAll.cpp",
+        "android/hardware/audio/2.0/StreamAll.cpp",
+        "android/hardware/audio/2.0/StreamInAll.cpp",
+        "android/hardware/audio/2.0/StreamOutAll.cpp",
+        "android/hardware/audio/2.0/StreamOutCallbackAll.cpp",
+    ],
+}
+
+genrule {
+    name: "android.hardware.audio@2.0_genc++_headers",
+    tool: "hidl-gen",
+    cmd: "$tool -o $genDir -Lc++ -randroid.hardware:hardware/interfaces android.hardware.audio@2.0",
+    srcs: [
+        "types.hal",
+        "IDevice.hal",
+        "IDevicesFactory.hal",
+        "IPrimaryDevice.hal",
+        "IStream.hal",
+        "IStreamIn.hal",
+        "IStreamOut.hal",
+        "IStreamOutCallback.hal",
+    ],
+    out: [
+        "android/hardware/audio/2.0/types.h",
+        "android/hardware/audio/2.0/IDevice.h",
+        "android/hardware/audio/2.0/IHwDevice.h",
+        "android/hardware/audio/2.0/BnDevice.h",
+        "android/hardware/audio/2.0/BpDevice.h",
+        "android/hardware/audio/2.0/BsDevice.h",
+        "android/hardware/audio/2.0/IDevicesFactory.h",
+        "android/hardware/audio/2.0/IHwDevicesFactory.h",
+        "android/hardware/audio/2.0/BnDevicesFactory.h",
+        "android/hardware/audio/2.0/BpDevicesFactory.h",
+        "android/hardware/audio/2.0/BsDevicesFactory.h",
+        "android/hardware/audio/2.0/IPrimaryDevice.h",
+        "android/hardware/audio/2.0/IHwPrimaryDevice.h",
+        "android/hardware/audio/2.0/BnPrimaryDevice.h",
+        "android/hardware/audio/2.0/BpPrimaryDevice.h",
+        "android/hardware/audio/2.0/BsPrimaryDevice.h",
+        "android/hardware/audio/2.0/IStream.h",
+        "android/hardware/audio/2.0/IHwStream.h",
+        "android/hardware/audio/2.0/BnStream.h",
+        "android/hardware/audio/2.0/BpStream.h",
+        "android/hardware/audio/2.0/BsStream.h",
+        "android/hardware/audio/2.0/IStreamIn.h",
+        "android/hardware/audio/2.0/IHwStreamIn.h",
+        "android/hardware/audio/2.0/BnStreamIn.h",
+        "android/hardware/audio/2.0/BpStreamIn.h",
+        "android/hardware/audio/2.0/BsStreamIn.h",
+        "android/hardware/audio/2.0/IStreamOut.h",
+        "android/hardware/audio/2.0/IHwStreamOut.h",
+        "android/hardware/audio/2.0/BnStreamOut.h",
+        "android/hardware/audio/2.0/BpStreamOut.h",
+        "android/hardware/audio/2.0/BsStreamOut.h",
+        "android/hardware/audio/2.0/IStreamOutCallback.h",
+        "android/hardware/audio/2.0/IHwStreamOutCallback.h",
+        "android/hardware/audio/2.0/BnStreamOutCallback.h",
+        "android/hardware/audio/2.0/BpStreamOutCallback.h",
+        "android/hardware/audio/2.0/BsStreamOutCallback.h",
+    ],
+}
+
+cc_library_shared {
+    name: "android.hardware.audio@2.0",
+    generated_sources: ["android.hardware.audio@2.0_genc++"],
+    generated_headers: ["android.hardware.audio@2.0_genc++_headers"],
+    export_generated_headers: ["android.hardware.audio@2.0_genc++_headers"],
+    shared_libs: [
+        "libhidl",
+        "libhwbinder",
+        "libutils",
+        "libcutils",
+        "android.hardware.audio.common@2.0",
+        "android.hardware.audio.effect@2.0",
+    ],
+}
diff --git a/audio/2.0/IDevice.hal b/audio/2.0/IDevice.hal
new file mode 100644
index 0000000..84e0d28
--- /dev/null
+++ b/audio/2.0/IDevice.hal
@@ -0,0 +1,226 @@
+/*
+ * Copyright (C) 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio@2.0;
+
+import android.hardware.audio.common@2.0;
+import IStreamIn;
+import IStreamOut;
+
+interface IDevice {
+    typedef android.hardware.audio@2.0::Result Result;
+
+    /*
+     * Returns whether the audio hardware interface has been initialized.
+     *
+     * @return retval OK on success, NOT_INITIALIZED on failure.
+     */
+    initCheck() generates (Result retval);
+
+    /*
+     * Sets the audio volume for all audio activities other than voice call. If
+     * NOT_SUPPORTED is returned, the software mixer will emulate this
+     * capability.
+     *
+     * @param volume 1.0f means unity, 0.0f is zero.
+     * @return retval operation completion status.
+     */
+    setMasterVolume(float volume) generates (Result retval);
+
+    /*
+     * Get the current master volume value for the HAL, if the HAL supports
+     * master volume control. For example, AudioFlinger will query this value
+     * from the primary audio HAL when the service starts and use the value for
+     * setting the initial master volume across all HALs. HALs which do not
+     * support this method must return NOT_SUPPORTED in 'retval'.
+     *
+     * @return retval operation completion status.
+     * @return volume 1.0f means unity, 0.0f is zero.
+     */
+    getMasterVolume() generates (Result retval, float volume);
+
+    /*
+     * Sets microphone muting state.
+     *
+     * @param mute whether microphone is muted.
+     * @return retval operation completion status.
+     */
+    setMicMute(bool mute) generates (Result retval);
+
+    /*
+     * Gets whether microphone is muted.
+     *
+     * @return retval operation completion status.
+     * @return mute whether microphone is muted.
+     */
+    getMicMute() generates (Result retval, bool mute);
+
+    /*
+     * Set the audio mute status for all audio activities. If the return value
+     * is NOT_SUPPORTED, the software mixer will emulate this capability.
+     *
+     * @param mute whether audio is muted.
+     * @return retval operation completion status.
+     */
+    setMasterMute(bool mute) generates (Result retval);
+
+    /**
+     * Get the current master mute status for the HAL, if the HAL supports
+     * master mute control. AudioFlinger will query this value from the primary
+     * audio HAL when the service starts and use the value for setting the
+     * initial master mute across all HALs. HAL must indicate that the feature
+     * is not supported by returning NOT_SUPPORTED status.
+     *
+     * @return retval operation completion status.
+     * @return mute whether audio is muted.
+     */
+    getMasterMute() generates (Result retval, bool mute);
+
+    /*
+     * Returns audio input buffer size according to parameters passed or
+     * INVALID_ARGUMENTS if one of the parameters is not supported.
+     *
+     * @param config audio configuration.
+     * @return retval operation completion status.
+     * @return bufferSize input buffer size in bytes.
+     */
+    getInputBufferSize(AudioConfig config)
+            generates (Result retval, uint64_t bufferSize);
+
+    /*
+     * This method creates and opens the audio hardware output stream.
+     *
+     * @param ioHandle handle assigned by AudioFlinger.
+     * @param device device type and (if needed) address.
+     * @param config stream configuration.
+     * @param flags additional flags.
+     * @return retval operation completion status.
+     * @return outStream created output stream.
+     */
+    openOutputStream(
+            AudioIoHandle ioHandle,
+            DeviceAddress device,
+            AudioConfig config,
+            AudioOutputFlag flags) generates (Result retval, IStreamOut outStream);
+
+    /*
+     * This method creates and opens the audio hardware input stream.
+     *
+     * @param ioHandle handle assigned by AudioFlinger.
+     * @param device device type and (if needed) address.
+     * @param config stream configuration.
+     * @param flags additional flags.
+     * @param source source specification.
+     * @return retval operation completion status.
+     * @return inStream created input stream.
+     */
+    openInputStream(
+            AudioIoHandle ioHandle,
+            DeviceAddress device,
+            AudioConfig config,
+            AudioInputFlag flags,
+            AudioSource source) generates (Result retval, IStreamIn inStream);
+
+    /*
+     * Creates an audio patch between several source and sink ports.  The handle
+     * is allocated by the HAL and must be unique for this audio HAL module.
+     *
+     * @param sources patch sources.
+     * @param sinks patch sinks.
+     * @return retval operation completion status.
+     * @return patch created patch handle.
+     */
+    createAudioPatch(vec<AudioPortConfig> sources, vec<AudioPortConfig> sinks)
+            generates (Result retval, AudioPatchHandle patch);
+
+    /*
+     * Release an audio patch.
+     *
+     * @param patch patch handle.
+     * @return retval operation completion status.
+     */
+    releaseAudioPatch(AudioPatchHandle patch) generates (Result retval);
+
+    /*
+     * Returns the list of supported attributes for a given audio port.
+     *
+     * As input, 'port' contains the information (type, role, address etc...)
+     * needed by the HAL to identify the port.
+     *
+     * As output, 'port' contains possible attributes (sampling rates, formats,
+     * channel masks, gain controllers...) for this port.
+     *
+     * @param port port identifier.
+     * @return retval operation completion status.
+     * @return port port descriptor with all parameters filled up.
+     */
+    getAudioPort(AudioPort port)
+            generates (Result retval, AudioPort port);
+
+    /*
+     * Set audio port configuration.
+     *
+     * @param config audio port configuration.
+     * @return retval operation completion status.
+     */
+    setAudioPortConfig(AudioPortConfig config) generates (Result retval);
+
+    /*
+     * Gets the HW synchronization source of the device. Calling this method is
+     * equivalent to getting AUDIO_PARAMETER_STREAM_HW_AV_SYNC on the legacy
+     * HAL.
+     *
+     * @return retval operation completion status.
+     * @return hwAvSync HW synchronization source
+     */
+    getHwAvSync() generates (Result retval, AudioHwSync hwAvSync);
+
+    /*
+     * Sets whether the screen is on. Calling this method is equivalent to
+     * setting AUDIO_PARAMETER_KEY_SCREEN_STATE on the legacy HAL.
+     */
+    setScreenState(bool turnedOn);
+
+    /*
+     * Generic method for retrieving vendor-specific parameter values.
+     * The framework does not interpret the parameters, they are passed
+     * in an opaque manner between a vendor application and HAL.
+     *
+     * @param keys parameter keys.
+     * @return retval operation completion status.
+     * @return parameters parameter key value pairs.
+     */
+    getParameters(vec<string> keys)
+            generates (Result retval, vec<ParameterValue> parameters);
+
+    /*
+     * Generic method for setting vendor-specific parameter values.
+     * The framework does not interpret the parameters, they are passed
+     * in an opaque manner between a vendor application and HAL.
+     *
+     * @param parameters parameter key value pairs.
+     * @return retval operation completion status.
+     */
+    setParameters(vec<ParameterValue> parameters) generates (Result retval);
+
+    /*
+     * Dumps information about the stream into the provided file descriptor.
+     * This is used for the dumpsys facility.
+     *
+     * @param fd dump file descriptor.
+     */
+    debugDump(handle fd);
+};
diff --git a/audio/2.0/IDevicesFactory.hal b/audio/2.0/IDevicesFactory.hal
new file mode 100644
index 0000000..a4e6956
--- /dev/null
+++ b/audio/2.0/IDevicesFactory.hal
@@ -0,0 +1,44 @@
+/*
+ * Copyright (C) 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio@2.0;
+
+import android.hardware.audio.common@2.0;
+import IDevice;
+
+interface IDevicesFactory {
+    typedef android.hardware.audio@2.0::Result Result;
+
+    enum Device {
+        PRIMARY,
+        A2DP,
+        USB,
+        R_SUBMIX
+    };
+
+    /*
+     * Opens an audio device. To close the device, it is necessary to release
+     * references to the returned device object.
+     *
+     * @param device device type.
+     * @return retval operation completion status. Returns INVALID_ARGUMENTS
+     *         if there is no corresponding hardware module found,
+     *         NOT_INITIALIZED if an error occured while opening the hardware
+     *         module.
+     * @return result the interface for the created device.
+     */
+    openDevice(Device device) generates (Result retval, IDevice result);
+};
diff --git a/audio/2.0/IPrimaryDevice.hal b/audio/2.0/IPrimaryDevice.hal
new file mode 100644
index 0000000..6beddfe
--- /dev/null
+++ b/audio/2.0/IPrimaryDevice.hal
@@ -0,0 +1,123 @@
+/*
+ * Copyright (C) 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio@2.0;
+
+import android.hardware.audio.common@2.0;
+import IDevice;
+
+interface IPrimaryDevice extends IDevice {
+    typedef android.hardware.audio@2.0::Result Result;
+
+    /*
+     * Sets the audio volume of a voice call.
+     *
+     * @param volume 1.0f means unity, 0.0f is zero.
+     * @return retval operation completion status.
+     */
+    setVoiceVolume(float volume) generates (Result retval);
+
+    /*
+     * This method is used to notify the HAL about audio mode changes.
+     *
+     * @param mode new mode.
+     * @return retval operation completion status.
+     */
+    setMode(AudioMode mode) generates (Result retval);
+
+    /*
+     * Gets whether BT SCO Noise Reduction and Echo Cancellation are enabled.
+     * Calling this method is equivalent to getting AUDIO_PARAMETER_KEY_BT_NREC
+     * on the legacy HAL.
+     *
+     * @return retval operation completion status.
+     * @return enabled whether BT SCO NR + EC are enabled.
+     */
+    getBtScoNrecEnabled() generates (Result retval, bool enabled);
+
+    /*
+     * Sets whether BT SCO Noise Reduction and Echo Cancellation are enabled.
+     * Calling this method is equivalent to setting AUDIO_PARAMETER_KEY_BT_NREC
+     * on the legacy HAL.
+     *
+     * @param enabled whether BT SCO NR + EC are enabled.
+     * @return retval operation completion status.
+     */
+    setBtScoNrecEnabled(bool enabled) generates (Result retval);
+
+    /*
+     * Gets whether BT SCO Wideband mode is enabled. Calling this method is
+     * equivalent to getting AUDIO_PARAMETER_KEY_BT_SCO_WB on the legacy HAL.
+     *
+     * @return retval operation completion status.
+     * @return enabled whether BT Wideband is enabled.
+     */
+    getBtScoWidebandEnabled() generates (Result retval, bool enabled);
+
+    /*
+     * Sets whether BT SCO Wideband mode is enabled. Calling this method is
+     * equivalent to setting AUDIO_PARAMETER_KEY_BT_SCO_WB on the legacy HAL.
+     *
+     * @param enabled whether BT Wideband is enabled.
+     * @return retval operation completion status.
+     */
+    setBtScoWidebandEnabled(bool enabled) generates (Result retval);
+
+    enum TtyMode {
+        OFF,
+        VCO,
+        HCO,
+        FULL
+    };
+
+    /*
+     * Gets current TTY mode selection. Calling this method is equivalent to
+     * getting AUDIO_PARAMETER_KEY_TTY_MODE on the legacy HAL.
+     *
+     * @return retval operation completion status.
+     * @return mode TTY mode.
+     */
+    getTtyMode() generates (Result retval, TtyMode mode);
+
+    /*
+     * Sets current TTY mode. Calling this method is equivalent to setting
+     * AUDIO_PARAMETER_KEY_TTY_MODE on the legacy HAL.
+     *
+     * @param mode TTY mode.
+     * @return retval operation completion status.
+     */
+    setTtyMode(TtyMode mode) generates (Result retval);
+
+    /*
+     * Gets whether Hearing Aid Compatibility - Telecoil (HAC-T) mode is
+     * enabled. Calling this method is equivalent to getting
+     * AUDIO_PARAMETER_KEY_HAC on the legacy HAL.
+     *
+     * @return retval operation completion status.
+     * @return enabled whether HAC mode is enabled.
+     */
+    getHacEnabled() generates (Result retval, bool enabled);
+
+    /*
+     * Sets whether Hearing Aid Compatibility - Telecoil (HAC-T) mode is
+     * enabled. Calling this method is equivalent to setting
+     * AUDIO_PARAMETER_KEY_HAC on the legacy HAL.
+     *
+     * @param enabled whether HAC mode is enabled.
+     * @return retval operation completion status.
+     */
+    setHacEnabled(bool enabled) generates (Result retval);
+};
diff --git a/audio/2.0/IStream.hal b/audio/2.0/IStream.hal
new file mode 100644
index 0000000..09ba42a
--- /dev/null
+++ b/audio/2.0/IStream.hal
@@ -0,0 +1,229 @@
+/*
+ * Copyright (C) 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio@2.0;
+
+import android.hardware.audio.common@2.0;
+import android.hardware.audio.effect@2.0::IEffect;
+
+interface IStream {
+    typedef android.hardware.audio@2.0::Result Result;
+
+    /*
+     * Return the frame size (number of bytes per sample).
+     *
+     * @return frameSize frame size in bytes.
+     */
+    getFrameSize() generates (uint64_t frameSize);
+
+    /*
+     * Return the frame count of the buffer. Calling this method is equivalent
+     * to getting AUDIO_PARAMETER_STREAM_FRAME_COUNT on the legacy HAL.
+     *
+     * @return count frame count.
+     */
+    getFrameCount() generates (uint64_t count);
+
+    /*
+     * Return the size of input/output buffer in bytes for this stream.
+     * It must be a multiple of the frame size.
+     *
+     * @return buffer buffer size in bytes.
+     */
+    getBufferSize() generates (uint64_t bufferSize);
+
+    /*
+     * Return the sampling rate in Hz.
+     *
+     * @return sampleRateHz sample rate in Hz.
+     */
+    getSampleRate() generates (uint32_t sampleRateHz);
+
+    /*
+     * Return supported sampling rates of the stream. Calling this method is
+     * equivalent to getting AUDIO_PARAMETER_STREAM_SUP_SAMPLING_RATES on the
+     * legacy HAL.
+     *
+     * @return sampleRateHz supported sample rates.
+     */
+    getSupportedSampleRates() generates (vec<uint32_t> sampleRates);
+
+    /*
+     * Sets the sampling rate of the stream. Calling this method is equivalent
+     * to setting AUDIO_PARAMETER_STREAM_SAMPLING_RATE on the legacy HAL.
+     *
+     * @param sampleRateHz sample rate in Hz.
+     * @return retval operation completion status.
+     */
+    setSampleRate(uint32_t sampleRateHz) generates (Result retval);
+
+    /*
+     * Return the channel mask of the stream.
+     *
+     * @return mask channel mask.
+     */
+    getChannelMask() generates (AudioChannelMask mask);
+
+    /*
+     * Return supported channel masks of the stream. Calling this method is
+     * equivalent to getting AUDIO_PARAMETER_STREAM_SUP_CHANNELS on the legacy
+     * HAL.
+     *
+     * @return masks supported audio masks.
+     */
+    getSupportedChannelMasks() generates (vec<AudioChannelMask> masks);
+
+    /*
+     * Sets the channel mask of the stream. Calling this method is equivalent to
+     * setting AUDIO_PARAMETER_STREAM_CHANNELS on the legacy HAL.
+     *
+     * @param format audio format.
+     * @return retval operation completion status.
+     */
+    setChannelMask(AudioChannelMask mask) generates (Result retval);
+
+    /*
+     * Return the audio format of the stream.
+     *
+     * @return format audio format.
+     */
+    getFormat() generates (AudioFormat format);
+
+    /*
+     * Return supported audio formats of the stream. Calling this method is
+     * equivalent to getting AUDIO_PARAMETER_STREAM_SUP_FORMATS on the legacy
+     * HAL.
+     *
+     * @return formats supported audio formats.
+     */
+    getSupportedFormats() generates (vec<AudioFormat> formats);
+
+    /*
+     * Sets the audio format of the stream. Calling this method is equivalent to
+     * setting AUDIO_PARAMETER_STREAM_FORMAT on the legacy HAL.
+     *
+     * @param format audio format.
+     * @return retval operation completion status.
+     */
+    setFormat(AudioFormat format) generates (Result retval);
+
+    /*
+     * Convenience method for retrieving several stream parameters in
+     * one transaction.
+     *
+     * @return sampleRateHz sample rate in Hz.
+     * @return mask channel mask.
+     * @return format audio format.
+     */
+    getAudioProperties() generates (
+            uint32_t sampleRateHz, AudioChannelMask mask, AudioFormat format);
+
+    /*
+     * Applies audio effect to the stream.
+     *
+     * @param effect the effect to apply.
+     * @return retval operation completion status.
+     */
+    addEffect(IEffect effect) generates (Result retval);
+
+    /*
+     * Stops application of the effect to the stream.
+     *
+     * @param effect the effect to apply.
+     * @return retval operation completion status.
+     */
+    removeEffect(IEffect effect) generates (Result retval);
+
+    /*
+     * Put the audio hardware input/output into standby mode.
+     * Driver must exit from standby mode at the next I/O operation.
+     *
+     * @return retval operation completion status.
+     */
+    standby() generates (Result retval);
+
+    /*
+     * Return the set of device(s) which this stream is connected to.
+     *
+     * @return retval operation completion status.
+     * @return device set of device(s) which this stream is connected to.
+     */
+    getDevice() generates (Result retval, AudioDevice device);
+
+    /*
+     * Connects the stream to the device.
+     *
+     * This method must only be used for HALs that do not support
+     * 'IDevice.createAudioPatch' method. Calling this method is
+     * equivalent to setting AUDIO_PARAMETER_STREAM_ROUTING in the legacy HAL
+     * interface.
+     *
+     * @param address device to connect the stream to.
+     * @return retval operation completion status.
+     */
+    setDevice(DeviceAddress address) generates (Result retval);
+
+    /*
+     * Notifies the stream about device connection state. Calling this method is
+     * equivalent to setting AUDIO_PARAMETER_DEVICE_[DIS]CONNECT on the legacy
+     * HAL.
+     *
+     * @param address audio device specification.
+     * @param connected whether the device is connected.
+     * @return retval operation completion status.
+     */
+    setConnectedState(DeviceAddress address, bool connected)
+            generates (Result retval);
+
+    /*
+     * Sets the HW synchronization source. Calling this method is equivalent to
+     * setting AUDIO_PARAMETER_STREAM_HW_AV_SYNC on the legacy HAL.
+     *
+     * @param hwAvSync HW synchronization source
+     * @return retval operation completion status.
+     */
+    setHwAvSync(AudioHwSync hwAvSync) generates (Result retval);
+
+    /*
+     * Generic method for retrieving vendor-specific parameter values.
+     * The framework does not interpret the parameters, they are passed
+     * in an opaque manner between a vendor application and HAL.
+     *
+     * @param keys parameter keys.
+     * @return retval operation completion status.
+     * @return parameters parameter key value pairs.
+     */
+    getParameters(vec<string> keys)
+            generates (Result retval, vec<ParameterValue> parameters);
+
+    /*
+     * Generic method for setting vendor-specific parameter values.
+     * The framework does not interpret the parameters, they are passed
+     * in an opaque manner between a vendor application and HAL.
+     *
+     * @param parameters parameter key value pairs.
+     * @return retval operation completion status.
+     */
+    setParameters(vec<ParameterValue> parameters) generates (Result retval);
+
+    /*
+     * Dumps information about the stream into the provided file descriptor.
+     * This is used for the dumpsys facility.
+     *
+     * @param fd dump file descriptor.
+     */
+    debugDump(handle fd);
+};
diff --git a/audio/2.0/IStreamIn.hal b/audio/2.0/IStreamIn.hal
new file mode 100644
index 0000000..049df75
--- /dev/null
+++ b/audio/2.0/IStreamIn.hal
@@ -0,0 +1,85 @@
+/*
+ * Copyright (C) 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio@2.0;
+
+import android.hardware.audio.common@2.0;
+import IStream;
+
+interface IStreamIn extends IStream {
+    typedef android.hardware.audio@2.0::Result Result;
+
+    /*
+     * Returns the source descriptor of the input stream. Calling this method is
+     * equivalent to getting AUDIO_PARAMETER_STREAM_INPUT_SOURCE on the legacy
+     * HAL.
+     *
+     * @return retval operation completion status.
+     * @return source audio source.
+     */
+    getAudioSource() generates (Result retval, AudioSource source);
+
+    /*
+     * Set the input gain for the audio driver.
+     *
+     * @param gain 1.0f is unity, 0.0f is zero.
+     * @result retval operation completion status.
+     */
+    setGain(float gain) generates (Result retval);
+
+    /*
+     * Read audio buffer in from driver. If at least one frame was read prior to
+     * the error, 'read' must return that byte count and then return an error
+     * in the subsequent call.
+     *
+     * @param size maximum amount of bytes to read.
+     * @return retval operation completion status.
+     * @return data audio data.
+     */
+    // TODO(mnaganov): Replace with FMQ version.
+    read(uint64_t size) generates (Result retval, vec<uint8_t> data);
+
+    /*
+     * Return the amount of input frames lost in the audio driver since the last
+     * call of this function.
+     *
+     * Audio driver is expected to reset the value to 0 and restart counting
+     * upon returning the current value by this function call. Such loss
+     * typically occurs when the user space process is blocked longer than the
+     * capacity of audio driver buffers.
+     *
+     * @return retval operation completion status.
+     * @return framesLost the number of input audio frames lost.
+     */
+    getInputFramesLost() generates (Result retval, uint32_t framesLost);
+
+    /**
+     * Return a recent count of the number of audio frames received and the
+     * clock time associated with that frame count.
+     *
+     * @return retval INVALID_STATE if the device is not ready/available,
+     *                NOT_SUPPORTED if the command is not supported,
+     *                OK otherwise.
+     * @return frames the total frame count received. This must be as early in
+     *                the capture pipeline as possible. In general, frames
+     *                must be non-negative and must not go "backwards".
+     * @return time is the clock monotonic time when frames was measured. In
+     *              general, time must be a positive quantity and must not
+     *              go "backwards".
+     */
+    getCapturePosition()
+            generates (Result retval, uint64_t frames, uint64_t time);
+};
diff --git a/audio/2.0/IStreamOut.hal b/audio/2.0/IStreamOut.hal
new file mode 100644
index 0000000..adce538
--- /dev/null
+++ b/audio/2.0/IStreamOut.hal
@@ -0,0 +1,191 @@
+/*
+ * Copyright (C) 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio@2.0;
+
+import android.hardware.audio.common@2.0;
+import IStream;
+import IStreamOutCallback;
+
+interface IStreamOut extends IStream {
+    typedef android.hardware.audio@2.0::Result Result;
+
+    /*
+     * Return the audio hardware driver estimated latency in milliseconds.
+     *
+     * @return latencyMs latency in milliseconds.
+     */
+    getLatency() generates (uint32_t latencyMs);
+
+    /*
+     * This method is used in situations where audio mixing is done in the
+     * hardware. This method serves as a direct interface with hardware,
+     * allowing to directly set the volume as apposed to via the framework.
+     * This method might produce multiple PCM outputs or hardware accelerated
+     * codecs, such as MP3 or AAC.
+     *
+     * @param left left channel attenuation, 1.0f is unity, 0.0f is zero.
+     * @param right right channel attenuation, 1.0f is unity, 0.0f is zero.
+     * @return retval operation completion status.
+     */
+    setVolume(float left, float right) generates (Result retval);
+
+    /*
+     * Write audio buffer to driver. On success, sets 'retval' to 'OK', and
+     * returns number of bytes written. If at least one frame was written
+     * successfully prior to the error, it is suggested that the driver return
+     * that successful (short) byte count and then return an error in the
+     * subsequent call.
+     *
+     * If 'setCallback' has previously been called to enable non-blocking mode
+     * then 'write' is not allowed to block. It must write only the number of
+     * bytes that currently fit in the driver/hardware buffer and then return
+     * this byte count. If this is less than the requested write size the
+     * callback function must be called when more space is available in the
+     * driver/hardware buffer.
+     *
+     * @param data audio data.
+     * @return retval operation completion status.
+     * @return written number of bytes written.
+     */
+    // TODO(mnaganov): Replace with FMQ version.
+    write(vec<uint8_t> data) generates (Result retval, uint64_t written);
+
+    /*
+     * Return the number of audio frames written by the audio DSP to DAC since
+     * the output has exited standby.
+     *
+     * @return retval operation completion status.
+     * @return dspFrames number of audio frames written.
+     */
+    getRenderPosition() generates (Result retval, uint32_t dspFrames);
+
+    /*
+     * Get the local time at which the next write to the audio driver will be
+     * presented. The units are microseconds, where the epoch is decided by the
+     * local audio HAL.
+     *
+     * @return retval operation completion status.
+     * @return timestampUs time of the next write.
+     */
+    getNextWriteTimestamp() generates (Result retval, int64_t timestampUs);
+
+    /*
+     * Set the callback interface for notifying completion of non-blocking
+     * write and drain.
+     *
+     * Calling this function implies that all future 'write' and 'drain'
+     * must be non-blocking and use the callback to signal completion.
+     *
+     * @return retval operation completion status.
+     */
+    setCallback(IStreamOutCallback callback) generates (Result retval);
+
+    /*
+     * Returns whether HAL supports pausing and resuming of streams.
+     *
+     * @return supportsPause true if pausing is supported.
+     * @return supportsResume true if resume is supported.
+     */
+    supportsPauseAndResume()
+            generates (bool supportsPause, bool supportsResume);
+
+    /**
+     * Notifies to the audio driver to stop playback however the queued buffers
+     * are retained by the hardware. Useful for implementing pause/resume. Empty
+     * implementation if not supported however must be implemented for hardware
+     * with non-trivial latency. In the pause state, some audio hardware may
+     * still be using power. Client code may consider calling 'suspend' after a
+     * timeout to prevent that excess power usage.
+     *
+     * Implementation of this function is mandatory for offloaded playback.
+     *
+     * @return retval operation completion status.
+     */
+    pause() generates (Result retval);
+
+    /*
+     * Notifies to the audio driver to resume playback following a pause.
+     * Returns error INVALID_STATE if called without matching pause.
+     *
+     * Implementation of this function is mandatory for offloaded playback.
+     *
+     * @return retval operation completion status.
+     */
+    resume() generates (Result retval);
+
+    /*
+     * Returns whether HAL supports draining of streams.
+     *
+     * @return supports true if draining is supported.
+     */
+    supportsDrain() generates (bool supports);
+
+    /**
+     * Requests notification when data buffered by the driver/hardware has been
+     * played. If 'setCallback' has previously been called to enable
+     * non-blocking mode, then 'drain' must not block, instead it must return
+     * quickly and completion of the drain is notified through the callback. If
+     * 'setCallback' has not been called, then 'drain' must block until
+     * completion.
+     *
+     * If 'type' is 'AUDIO_DRAIN_ALL', the drain completes when all previously
+     * written data has been played.
+     *
+     * If 'type' is 'AUDIO_DRAIN_EARLY_NOTIFY', the drain completes shortly
+     * before all data for the current track has played to allow time for the
+     * framework to perform a gapless track switch.
+     *
+     * Drain must return immediately on 'stop' and 'flush' calls.
+     *
+     * Implementation of this function is mandatory for offloaded playback.
+     *
+     * @param type type of drain.
+     * @return retval operation completion status.
+     */
+    drain(AudioDrain type) generates (Result retval);
+
+    /*
+     * Notifies to the audio driver to flush the queued data. Stream must
+     * already be paused before calling 'flush'.
+     *
+     * Implementation of this function is mandatory for offloaded playback.
+     *
+     * @return retval operation completion status.
+     */
+    flush() generates (Result retval);
+
+    /*
+     * Return a recent count of the number of audio frames presented to an
+     * external observer. This excludes frames which have been written but are
+     * still in the pipeline. The count is not reset to zero when output enters
+     * standby. Also returns the value of CLOCK_MONOTONIC as of this
+     * presentation count. The returned count is expected to be 'recent', but
+     * does not need to be the most recent possible value. However, the
+     * associated time must correspond to whatever count is returned.
+     *
+     * Example: assume that N+M frames have been presented, where M is a 'small'
+     * number. Then it is permissible to return N instead of N+M, and the
+     * timestamp must correspond to N rather than N+M. The terms 'recent' and
+     * 'small' are not defined. They reflect the quality of the implementation.
+     *
+     * @return retval operation completion status.
+     * @return frames count of presented audio frames.
+     * @return timeStamp associated clock time.
+     */
+    getPresentationPosition()
+            generates (Result retval, uint64_t frames, TimeSpec timeStamp);
+};
diff --git a/audio/2.0/IStreamOutCallback.hal b/audio/2.0/IStreamOutCallback.hal
new file mode 100644
index 0000000..267c46d
--- /dev/null
+++ b/audio/2.0/IStreamOutCallback.hal
@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio@2.0;
+
+/*
+ * Asynchronous write callback interface.
+ */
+interface IStreamOutCallback {
+    /*
+     * Non blocking write completed.
+     */
+    onWriteReady();
+
+    /*
+     * Drain completed.
+     */
+    onDrainReady();
+
+    /*
+     * Stream hit an error.
+     */
+    onError();
+};
diff --git a/audio/2.0/types.hal b/audio/2.0/types.hal
new file mode 100644
index 0000000..6369885
--- /dev/null
+++ b/audio/2.0/types.hal
@@ -0,0 +1,72 @@
+/*
+ * Copyright (C) 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio@2.0;
+
+import android.hardware.audio.common@2.0;
+
+enum Result {
+    OK,
+    NOT_INITIALIZED,
+    INVALID_ARGUMENTS,
+    INVALID_STATE,
+    NOT_SUPPORTED
+};
+
+@export(name="audio_drain_type_t", value_prefix="AUDIO_DRAIN_")
+enum AudioDrain {
+    /* drain() returns when all data has been played. */
+    ALL,
+    /* drain() returns a short time before all data from the current track has
+       been played to give time for gapless track switch. */
+    EARLY_NOTIFY
+};
+
+/*
+ * A substitute for POSIX timespec.
+ */
+struct TimeSpec {
+    uint64_t tvSec;   // seconds
+    uint64_t tvNSec;  // nanoseconds
+};
+
+/*
+ * IEEE 802 MAC address.
+ */
+typedef uint8_t[6] MacAddress;
+
+struct ParameterValue {
+    string key;
+    string value;
+};
+
+/*
+ * Specifies a device in case when several devices of the same type
+ * can be connected (e.g. BT A2DP, USB).
+ */
+struct DeviceAddress {
+    AudioDevice device;  // discriminator
+    union Address {
+        MacAddress mac;     // used for BLUETOOTH_A2DP_*
+        uint8_t[4] ipv4;    // used for IP
+        struct Alsa {
+            int32_t card;
+            int32_t device;
+        } alsa;             // used for USB_*
+        int32_t busId;      // used for BUS
+    } address;
+    string rSubmixAddress;  // used for REMOTE_SUBMIX
+};
diff --git a/audio/common/2.0/Android.bp b/audio/common/2.0/Android.bp
new file mode 100644
index 0000000..655c0c9
--- /dev/null
+++ b/audio/common/2.0/Android.bp
@@ -0,0 +1,38 @@
+// This file is autogenerated by hidl-gen. Do not edit manually.
+
+genrule {
+    name: "android.hardware.audio.common@2.0_genc++",
+    tool: "hidl-gen",
+    cmd: "$tool -o $genDir -Lc++ -randroid.hardware:hardware/interfaces android.hardware.audio.common@2.0",
+    srcs: [
+        "types.hal",
+    ],
+    out: [
+        "android/hardware/audio/common/2.0/types.cpp",
+    ],
+}
+
+genrule {
+    name: "android.hardware.audio.common@2.0_genc++_headers",
+    tool: "hidl-gen",
+    cmd: "$tool -o $genDir -Lc++ -randroid.hardware:hardware/interfaces android.hardware.audio.common@2.0",
+    srcs: [
+        "types.hal",
+    ],
+    out: [
+        "android/hardware/audio/common/2.0/types.h",
+    ],
+}
+
+cc_library_shared {
+    name: "android.hardware.audio.common@2.0",
+    generated_sources: ["android.hardware.audio.common@2.0_genc++"],
+    generated_headers: ["android.hardware.audio.common@2.0_genc++_headers"],
+    export_generated_headers: ["android.hardware.audio.common@2.0_genc++_headers"],
+    shared_libs: [
+        "libhidl",
+        "libhwbinder",
+        "libutils",
+        "libcutils",
+    ],
+}
diff --git a/audio/common/2.0/types.hal b/audio/common/2.0/types.hal
new file mode 100644
index 0000000..a5ec68d
--- /dev/null
+++ b/audio/common/2.0/types.hal
@@ -0,0 +1,864 @@
+/*
+ * Copyright (C) 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio.common@2.0;
+
+/*
+ *
+ *  IDs and Handles
+ *
+ */
+
+/*
+ * Handle type for identifying audio sources and sinks.
+ */
+typedef int32_t AudioIoHandle;
+
+/*
+ * Audio hw module handle functions or structures referencing a module.
+ */
+typedef int32_t AudioModuleHandle;
+
+/*
+ * Each port has a unique ID or handle allocated by policy manager.
+ */
+typedef int32_t AudioPortHandle;
+
+/*
+ * Each patch is identified by a handle at the interface used to create that
+ * patch. For instance, when a patch is created by the audio HAL, the HAL
+ * allocates and returns a handle.  This handle is unique to a given audio HAL
+ * hardware module.  But the same patch receives another system wide unique
+ * handle allocated by the framework.  This unique handle is used for all
+ * transactions inside the framework.
+ */
+typedef int32_t AudioPatchHandle;
+
+/*
+ * A HW synchronization source returned by the audio HAL.
+ */
+typedef uint32_t AudioHwSync;
+
+/*
+ * Each port has a unique ID or handle allocated by policy manager.
+ */
+@export(name="")
+enum AudioHandleConsts {
+    AUDIO_IO_HANDLE_NONE = 0,
+    AUDIO_MODULE_HANDLE_NONE = 0,
+    AUDIO_PORT_HANDLE_NONE = 0,
+    AUDIO_PATCH_HANDLE_NONE = 0,
+};
+
+/*
+ * Commonly used structure for passing unique identifieds (UUID).
+ * For the definition of UUID, refer to ITU-T X.667 spec.
+ */
+struct Uuid {
+    uint32_t timeLow;
+    uint16_t timeMid;
+    uint16_t versionAndTimeHigh;
+    uint16_t variantAndClockSeqHigh;
+    uint8_t[6] node;
+};
+
+
+/*
+ *
+ *  Audio streams
+ *
+ */
+
+/*
+ * Audio stream type describing the intented use case of a stream.
+ */
+@export(name="audio_stream_type_t", value_prefix="AUDIO_STREAM_")
+enum AudioStreamType : int32_t {
+    // These values must kept in sync with
+    //  frameworks/base/media/java/android/media/AudioSystem.java
+    // TODO: Synchronization should be done automatically by tools
+    DEFAULT          = -1,
+    MIN              = 0,
+    VOICE_CALL       = 0,
+    SYSTEM           = 1,
+    RING             = 2,
+    MUSIC            = 3,
+    ALARM            = 4,
+    NOTIFICATION     = 5,
+    BLUETOOTH_SCO    = 6,
+    ENFORCED_AUDIBLE = 7,  // Sounds that cannot be muted by user and must be
+                           // routed to speaker
+    DTMF             = 8,
+    TTS              = 9,  // Transmitted Through Speaker.  Plays over speaker
+                           // only, silent on other devices
+    ACCESSIBILITY    = 10, // For accessibility talk back prompts
+    REROUTING        = 11, // For dynamic policy output mixes
+    PATCH            = 12, // For internal audio flinger tracks.  Fixed volume
+    PUBLIC_CNT       = TTS + 1,
+    // Number of streams considered by audio policy for volume and routing
+    FOR_POLICY_CNT   = PATCH,
+    CNT              = PATCH + 1
+};
+
+@export(name="audio_source_t", value_prefix="AUDIO_SOURCE_")
+enum AudioSource {
+    // These values must kept in sync with
+    //  frameworks/base/media/java/android/media/MediaRecorder.java,
+    //  frameworks/av/services/audiopolicy/AudioPolicyService.cpp,
+    //  system/media/audio_effects/include/audio_effects/audio_effects_conf.h
+    DEFAULT             = 0,
+    MIC                 = 1,
+    VOICE_UPLINK        = 2,
+    VOICE_DOWNLINK      = 3,
+    VOICE_CALL          = 4,
+    CAMCORDER           = 5,
+    VOICE_RECOGNITION   = 6,
+    VOICE_COMMUNICATION = 7,
+    /*
+     * Source for the mix to be presented remotely. An example of remote
+     * presentation is Wifi Display where a dongle attached to a TV can be used
+     * to play the mix captured by this audio source.
+     */
+    REMOTE_SUBMIX       = 8,
+    /*
+     * Source for unprocessed sound. Usage examples include level measurement
+     * and raw signal analysis.
+     */
+    UNPROCESSED         = 9,
+
+    CNT,
+    MAX                 = CNT - 1,
+    FM_TUNER            = 1998,
+    /*
+     * A low-priority, preemptible audio source for for background software
+     * hotword detection. Same tuning as VOICE_RECOGNITION.  Used only
+     * internally by the framework.
+     */
+    HOTWORD             = 1999
+};
+
+typedef int32_t AudioSession;
+/*
+ * Special audio session values.
+ */
+@export(name="audio_session_t", value_prefix="AUDIO_SESSION_")
+enum AudioSessionConsts : int32_t {
+    /*
+     * Session for effects attached to a particular output stream
+     * (value must be less than 0)
+     */
+    OUTPUT_STAGE = -1,
+    /*
+     * Session for effects applied to output mix. These effects can
+     * be moved by audio policy manager to another output stream
+     * (value must be 0)
+     */
+    OUTPUT_MIX = 0,
+    /*
+     * Application does not specify an explicit session ID to be used, and
+     * requests a new session ID to be allocated TODO use unique values for
+     * AUDIO_SESSION_OUTPUT_MIX and AUDIO_SESSION_ALLOCATE, after all uses have
+     * been updated from 0 to the appropriate symbol, and have been tested.
+     * Corresponds to AudioManager.AUDIO_SESSION_ID_GENERATE and
+     * AudioSystem.AUDIO_SESSION_ALLOCATE.
+     */
+    ALLOCATE = 0,
+    /*
+     * For use with AudioRecord::start(), this indicates no trigger session.
+     * It is also used with output tracks and patch tracks, which never have a
+     * session.
+     */
+    NONE = 0
+};
+
+/*
+ * Audio format  is a 32-bit word that consists of:
+ *   main format field (upper 8 bits)
+ *   sub format field (lower 24 bits).
+ *
+ * The main format indicates the main codec type. The sub format field indicates
+ * options and parameters for each format. The sub format is mainly used for
+ * record to indicate for instance the requested bitrate or profile.  It can
+ * also be used for certain formats to give informations not present in the
+ * encoded audio stream (e.g. octet alignement for AMR).
+ */
+@export(name="audio_format_t", value_prefix="AUDIO_FORMAT_")
+enum AudioFormat : uint32_t {
+    INVALID             = 0xFFFFFFFFUL,
+    DEFAULT             = 0,
+    PCM                 = 0x00000000UL, /* DO NOT CHANGE */
+    MP3                 = 0x01000000UL,
+    AMR_NB              = 0x02000000UL,
+    AMR_WB              = 0x03000000UL,
+    AAC                 = 0x04000000UL,
+    HE_AAC_V1           = 0x05000000UL, /* Deprecated, Use AAC_HE_V1*/
+    HE_AAC_V2           = 0x06000000UL, /* Deprecated, Use AAC_HE_V2*/
+    VORBIS              = 0x07000000UL,
+    OPUS                = 0x08000000UL,
+    AC3                 = 0x09000000UL,
+    E_AC3               = 0x0A000000UL,
+    DTS                 = 0x0B000000UL,
+    DTS_HD              = 0x0C000000UL,
+    // IEC61937 is encoded audio wrapped in 16-bit PCM.
+    IEC61937            = 0x0D000000UL,
+    DOLBY_TRUEHD        = 0x0E000000UL,
+    MAIN_MASK           = 0xFF000000UL, /* Deprecated */
+    SUB_MASK            = 0x00FFFFFFUL,
+
+    /* Subformats */
+    PCM_SUB_16_BIT        = 0x1, // PCM signed 16 bits
+    PCM_SUB_8_BIT         = 0x2, // PCM unsigned 8 bits
+    PCM_SUB_32_BIT        = 0x3, // PCM signed .31 fixed point
+    PCM_SUB_8_24_BIT      = 0x4, // PCM signed 8.23 fixed point
+    PCM_SUB_FLOAT         = 0x5, // PCM single-precision float pt
+    PCM_SUB_24_BIT_PACKED = 0x6, // PCM signed .23 fix pt (3 bytes)
+
+    MP3_SUB_NONE          = 0x0,
+
+    AMR_SUB_NONE          = 0x0,
+
+    AAC_SUB_MAIN          = 0x1,
+    AAC_SUB_LC            = 0x2,
+    AAC_SUB_SSR           = 0x4,
+    AAC_SUB_LTP           = 0x8,
+    AAC_SUB_HE_V1         = 0x10,
+    AAC_SUB_SCALABLE      = 0x20,
+    AAC_SUB_ERLC          = 0x40,
+    AAC_SUB_LD            = 0x80,
+    AAC_SUB_HE_V2         = 0x100,
+    AAC_SUB_ELD           = 0x200,
+
+    VORBIS_SUB_NONE       = 0x0,
+
+    /* Aliases */
+    /* note != AudioFormat.ENCODING_PCM_16BIT */
+    PCM_16_BIT          = (PCM | PCM_SUB_16_BIT),
+    /* note != AudioFormat.ENCODING_PCM_8BIT */
+    PCM_8_BIT           = (PCM | PCM_SUB_8_BIT),
+    PCM_32_BIT          = (PCM | PCM_SUB_32_BIT),
+    PCM_8_24_BIT        = (PCM | PCM_SUB_8_24_BIT),
+    PCM_FLOAT           = (PCM | PCM_SUB_FLOAT),
+    PCM_24_BIT_PACKED   = (PCM | PCM_SUB_24_BIT_PACKED),
+    AAC_MAIN            = (AAC | AAC_SUB_MAIN),
+    AAC_LC              = (AAC | AAC_SUB_LC),
+    AAC_SSR             = (AAC | AAC_SUB_SSR),
+    AAC_LTP             = (AAC | AAC_SUB_LTP),
+    AAC_HE_V1           = (AAC | AAC_SUB_HE_V1),
+    AAC_SCALABLE        = (AAC | AAC_SUB_SCALABLE),
+    AAC_ERLC            = (AAC | AAC_SUB_ERLC),
+    AAC_LD              = (AAC | AAC_SUB_LD),
+    AAC_HE_V2           = (AAC | AAC_SUB_HE_V2),
+    AAC_ELD             = (AAC | AAC_SUB_ELD)
+};
+
+/*
+ * Usage of these values highlights places in the code that use 2- or 8- channel
+ * assumptions.
+ */
+@export(name="")
+enum FixedChannelCount {
+    FCC_2 = 2, // This is typically due to legacy implementation of stereo I/O
+    FCC_8 = 8  // This is typically due to audio mixer and resampler limitations
+};
+
+/*
+ * A channel mask per se only defines the presence or absence of a channel, not
+ * the order.  See AUDIO_INTERLEAVE_* for the platform convention of order.
+ *
+ * AudioChannelMask is an opaque type and its internal layout should not be
+ * assumed as it may change in the future.  Instead, always use functions
+ * to examine it.
+ *
+ * These are the current representations:
+ *
+ *   REPRESENTATION_POSITION
+ *     is a channel mask representation for position assignment.  Each low-order
+ *     bit corresponds to the spatial position of a transducer (output), or
+ *     interpretation of channel (input).  The user of a channel mask needs to
+ *     know the context of whether it is for output or input.  The constants
+ *     OUT_* or IN_* apply to the bits portion.  It is not permitted for no bits
+ *     to be set.
+ *
+ *   REPRESENTATION_INDEX
+ *     is a channel mask representation for index assignment.  Each low-order
+ *     bit corresponds to a selected channel.  There is no platform
+ *     interpretation of the various bits.  There is no concept of output or
+ *     input.  It is not permitted for no bits to be set.
+ *
+ * All other representations are reserved for future use.
+ *
+ * Warning: current representation distinguishes between input and output, but
+ * this will not the be case in future revisions of the platform. Wherever there
+ * is an ambiguity between input and output that is currently resolved by
+ * checking the channel mask, the implementer should look for ways to fix it
+ * with additional information outside of the mask.
+ */
+@export(name="", value_prefix="AUDIO_CHANNEL_")
+enum AudioChannelMask : uint32_t {
+    REPRESENTATION_POSITION = 0, /* must be 0 for compatibility */
+    /* 1 is reserved for future use */
+    REPRESENTATION_INDEX    = 2,
+    /* 3 is reserved for future use */
+
+    /* These can be a complete value of AudioChannelMask */
+    NONE                      = 0x0,
+    INVALID                   = 0xC0000000,
+
+   /*
+    * These can be the bits portion of an AudioChannelMask
+    * with representation REPRESENTATION_POSITION.
+    */
+
+    /* output channels */
+    OUT_FRONT_LEFT            = 0x1,
+    OUT_FRONT_RIGHT           = 0x2,
+    OUT_FRONT_CENTER          = 0x4,
+    OUT_LOW_FREQUENCY         = 0x8,
+    OUT_BACK_LEFT             = 0x10,
+    OUT_BACK_RIGHT            = 0x20,
+    OUT_FRONT_LEFT_OF_CENTER  = 0x40,
+    OUT_FRONT_RIGHT_OF_CENTER = 0x80,
+    OUT_BACK_CENTER           = 0x100,
+    OUT_SIDE_LEFT             = 0x200,
+    OUT_SIDE_RIGHT            = 0x400,
+    OUT_TOP_CENTER            = 0x800,
+    OUT_TOP_FRONT_LEFT        = 0x1000,
+    OUT_TOP_FRONT_CENTER      = 0x2000,
+    OUT_TOP_FRONT_RIGHT       = 0x4000,
+    OUT_TOP_BACK_LEFT         = 0x8000,
+    OUT_TOP_BACK_CENTER       = 0x10000,
+    OUT_TOP_BACK_RIGHT        = 0x20000,
+
+    OUT_MONO     = OUT_FRONT_LEFT,
+    OUT_STEREO   = (OUT_FRONT_LEFT | OUT_FRONT_RIGHT),
+    OUT_QUAD     = (OUT_FRONT_LEFT | OUT_FRONT_RIGHT |
+            OUT_BACK_LEFT | OUT_BACK_RIGHT),
+    OUT_QUAD_BACK = OUT_QUAD,
+    /* like OUT_QUAD_BACK with *_SIDE_* instead of *_BACK_* */
+    OUT_QUAD_SIDE = (OUT_FRONT_LEFT | OUT_FRONT_RIGHT |
+            OUT_SIDE_LEFT | OUT_SIDE_RIGHT),
+    OUT_5POINT1  = (OUT_FRONT_LEFT | OUT_FRONT_RIGHT |
+            OUT_FRONT_CENTER | OUT_LOW_FREQUENCY |
+            OUT_BACK_LEFT | OUT_BACK_RIGHT),
+    OUT_5POINT1_BACK = OUT_5POINT1,
+    /* like OUT_5POINT1_BACK with *_SIDE_* instead of *_BACK_* */
+    OUT_5POINT1_SIDE = (OUT_FRONT_LEFT | OUT_FRONT_RIGHT |
+            OUT_FRONT_CENTER | OUT_LOW_FREQUENCY |
+            OUT_SIDE_LEFT | OUT_SIDE_RIGHT),
+    /* matches the correct AudioFormat.CHANNEL_OUT_7POINT1_SURROUND */
+    OUT_7POINT1  = (OUT_FRONT_LEFT | OUT_FRONT_RIGHT |
+            OUT_FRONT_CENTER | OUT_LOW_FREQUENCY |
+            OUT_BACK_LEFT | OUT_BACK_RIGHT |
+            OUT_SIDE_LEFT | OUT_SIDE_RIGHT),
+    OUT_ALL      = (OUT_FRONT_LEFT | OUT_FRONT_RIGHT |
+            OUT_FRONT_CENTER | OUT_LOW_FREQUENCY |
+            OUT_BACK_LEFT | OUT_BACK_RIGHT |
+            OUT_FRONT_LEFT_OF_CENTER | OUT_FRONT_RIGHT_OF_CENTER |
+            OUT_BACK_CENTER |
+            OUT_SIDE_LEFT | OUT_SIDE_RIGHT |
+            OUT_TOP_CENTER |
+            OUT_TOP_FRONT_LEFT | OUT_TOP_FRONT_CENTER | OUT_TOP_FRONT_RIGHT |
+            OUT_TOP_BACK_LEFT | OUT_TOP_BACK_CENTER | OUT_TOP_BACK_RIGHT),
+
+    /* These are bits only, not complete values */
+
+    /* input channels */
+    IN_LEFT            = 0x4,
+    IN_RIGHT           = 0x8,
+    IN_FRONT           = 0x10,
+    IN_BACK            = 0x20,
+    IN_LEFT_PROCESSED  = 0x40,
+    IN_RIGHT_PROCESSED = 0x80,
+    IN_FRONT_PROCESSED = 0x100,
+    IN_BACK_PROCESSED  = 0x200,
+    IN_PRESSURE        = 0x400,
+    IN_X_AXIS          = 0x800,
+    IN_Y_AXIS          = 0x1000,
+    IN_Z_AXIS          = 0x2000,
+    IN_VOICE_UPLINK    = 0x4000,
+    IN_VOICE_DNLINK    = 0x8000,
+
+    IN_MONO   = IN_FRONT,
+    IN_STEREO = (IN_LEFT | IN_RIGHT),
+    IN_FRONT_BACK = (IN_FRONT | IN_BACK),
+    IN_ALL    = (IN_LEFT | IN_RIGHT | IN_FRONT | IN_BACK|
+            IN_LEFT_PROCESSED | IN_RIGHT_PROCESSED |
+            IN_FRONT_PROCESSED | IN_BACK_PROCESSED|
+            IN_PRESSURE |
+            IN_X_AXIS | IN_Y_AXIS | IN_Z_AXIS |
+            IN_VOICE_UPLINK | IN_VOICE_DNLINK),
+
+    COUNT_MAX    = 30,
+    INDEX_HDR    = REPRESENTATION_INDEX << COUNT_MAX,
+    INDEX_MASK_1 = INDEX_HDR | ((1 << 1) - 1),
+    INDEX_MASK_2 = INDEX_HDR | ((1 << 2) - 1),
+    INDEX_MASK_3 = INDEX_HDR | ((1 << 3) - 1),
+    INDEX_MASK_4 = INDEX_HDR | ((1 << 4) - 1),
+    INDEX_MASK_5 = INDEX_HDR | ((1 << 5) - 1),
+    INDEX_MASK_6 = INDEX_HDR | ((1 << 6) - 1),
+    INDEX_MASK_7 = INDEX_HDR | ((1 << 7) - 1),
+    INDEX_MASK_8 = INDEX_HDR | ((1 << 8) - 1)
+};
+
+
+/*
+ * Expresses the convention when stereo audio samples are stored interleaved
+ * in an array.  This should improve readability by allowing code to use
+ * symbolic indices instead of hard-coded [0] and [1].
+ *
+ * For multi-channel beyond stereo, the platform convention is that channels
+ * are interleaved in order from least significant channel mask bit to most
+ * significant channel mask bit, with unused bits skipped.  Any exceptions
+ * to this convention will be noted at the appropriate API.
+ */
+@export(name="", value_prefix="AUDIO_INTERLEAVE_")
+enum AudioInterleave {
+    LEFT   = 0,
+    RIGHT  = 1,
+};
+
+/*
+ * Major modes for a mobile device. The current mode setting affects audio
+ * routing.
+ */
+@export(name="audio_mode_t", value_prefix="AUDIO_MODE_")
+enum AudioMode {
+    INVALID          = -2,
+    CURRENT          = -1,
+    NORMAL           = 0,
+    RINGTONE         = 1,
+    IN_CALL          = 2,
+    IN_COMMUNICATION = 3,
+
+    CNT,
+    MAX              = CNT - 1,
+};
+
+@export(name="", value_prefix="AUDIO_DEVICE_")
+enum AudioDevice : uint32_t {
+    NONE                          = 0x0,
+    /* reserved bits */
+    BIT_IN                        = 0x80000000,
+    BIT_DEFAULT                   = 0x40000000,
+    /* output devices */
+    OUT_EARPIECE                  = 0x1,
+    OUT_SPEAKER                   = 0x2,
+    OUT_WIRED_HEADSET             = 0x4,
+    OUT_WIRED_HEADPHONE           = 0x8,
+    OUT_BLUETOOTH_SCO             = 0x10,
+    OUT_BLUETOOTH_SCO_HEADSET     = 0x20,
+    OUT_BLUETOOTH_SCO_CARKIT      = 0x40,
+    OUT_BLUETOOTH_A2DP            = 0x80,
+    OUT_BLUETOOTH_A2DP_HEADPHONES = 0x100,
+    OUT_BLUETOOTH_A2DP_SPEAKER    = 0x200,
+    OUT_AUX_DIGITAL               = 0x400,
+    OUT_HDMI                      = OUT_AUX_DIGITAL,
+    /* uses an analog connection (multiplexed over the USB pins for instance) */
+    OUT_ANLG_DOCK_HEADSET         = 0x800,
+    OUT_DGTL_DOCK_HEADSET         = 0x1000,
+    /* USB accessory mode: Android device is USB device and dock is USB host */
+    OUT_USB_ACCESSORY             = 0x2000,
+    /* USB host mode: Android device is USB host and dock is USB device */
+    OUT_USB_DEVICE                = 0x4000,
+    OUT_REMOTE_SUBMIX             = 0x8000,
+    /* Telephony voice TX path */
+    OUT_TELEPHONY_TX              = 0x10000,
+    /* Analog jack with line impedance detected */
+    OUT_LINE                      = 0x20000,
+    /* HDMI Audio Return Channel */
+    OUT_HDMI_ARC                  = 0x40000,
+    /* S/PDIF out */
+    OUT_SPDIF                     = 0x80000,
+    /* FM transmitter out */
+    OUT_FM                        = 0x100000,
+    /* Line out for av devices */
+    OUT_AUX_LINE                  = 0x200000,
+    /* limited-output speaker device for acoustic safety */
+    OUT_SPEAKER_SAFE              = 0x400000,
+    OUT_IP                        = 0x800000,
+    /* audio bus implemented by the audio system (e.g an MOST stereo channel) */
+    OUT_BUS                       = 0x1000000,
+    OUT_DEFAULT                   = BIT_DEFAULT,
+    OUT_ALL      = (OUT_EARPIECE |
+            OUT_SPEAKER |
+            OUT_WIRED_HEADSET |
+            OUT_WIRED_HEADPHONE |
+            OUT_BLUETOOTH_SCO |
+            OUT_BLUETOOTH_SCO_HEADSET |
+            OUT_BLUETOOTH_SCO_CARKIT |
+            OUT_BLUETOOTH_A2DP |
+            OUT_BLUETOOTH_A2DP_HEADPHONES |
+            OUT_BLUETOOTH_A2DP_SPEAKER |
+            OUT_HDMI |
+            OUT_ANLG_DOCK_HEADSET |
+            OUT_DGTL_DOCK_HEADSET |
+            OUT_USB_ACCESSORY |
+            OUT_USB_DEVICE |
+            OUT_REMOTE_SUBMIX |
+            OUT_TELEPHONY_TX |
+            OUT_LINE |
+            OUT_HDMI_ARC |
+            OUT_SPDIF |
+            OUT_FM |
+            OUT_AUX_LINE |
+            OUT_SPEAKER_SAFE |
+            OUT_IP |
+            OUT_BUS |
+            OUT_DEFAULT),
+    OUT_ALL_A2DP = (OUT_BLUETOOTH_A2DP |
+            OUT_BLUETOOTH_A2DP_HEADPHONES |
+            OUT_BLUETOOTH_A2DP_SPEAKER),
+    OUT_ALL_SCO  = (OUT_BLUETOOTH_SCO |
+            OUT_BLUETOOTH_SCO_HEADSET |
+            OUT_BLUETOOTH_SCO_CARKIT),
+    OUT_ALL_USB  = (OUT_USB_ACCESSORY | OUT_USB_DEVICE),
+    /* input devices */
+    IN_COMMUNICATION         = BIT_IN | 0x1,
+    IN_AMBIENT               = BIT_IN | 0x2,
+    IN_BUILTIN_MIC           = BIT_IN | 0x4,
+    IN_BLUETOOTH_SCO_HEADSET = BIT_IN | 0x8,
+    IN_WIRED_HEADSET         = BIT_IN | 0x10,
+    IN_AUX_DIGITAL           = BIT_IN | 0x20,
+    IN_HDMI                  = IN_AUX_DIGITAL,
+    /* Telephony voice RX path */
+    IN_VOICE_CALL            = BIT_IN | 0x40,
+    IN_TELEPHONY_RX          = IN_VOICE_CALL,
+    IN_BACK_MIC              = BIT_IN | 0x80,
+    IN_REMOTE_SUBMIX         = BIT_IN | 0x100,
+    IN_ANLG_DOCK_HEADSET     = BIT_IN | 0x200,
+    IN_DGTL_DOCK_HEADSET     = BIT_IN | 0x400,
+    IN_USB_ACCESSORY         = BIT_IN | 0x800,
+    IN_USB_DEVICE            = BIT_IN | 0x1000,
+    /* FM tuner input */
+    IN_FM_TUNER              = BIT_IN | 0x2000,
+    /* TV tuner input */
+    IN_TV_TUNER              = BIT_IN | 0x4000,
+    /* Analog jack with line impedance detected */
+    IN_LINE                  = BIT_IN | 0x8000,
+    /* S/PDIF in */
+    IN_SPDIF                 = BIT_IN | 0x10000,
+    IN_BLUETOOTH_A2DP        = BIT_IN | 0x20000,
+    IN_LOOPBACK              = BIT_IN | 0x40000,
+    IN_IP                    = BIT_IN | 0x80000,
+    /* audio bus implemented by the audio system (e.g an MOST stereo channel) */
+    IN_BUS                   = BIT_IN | 0x100000,
+    IN_DEFAULT               = BIT_IN |
+                                            BIT_DEFAULT,
+
+    IN_ALL     = (IN_COMMUNICATION |
+            IN_AMBIENT |
+            IN_BUILTIN_MIC |
+            IN_BLUETOOTH_SCO_HEADSET |
+            IN_WIRED_HEADSET |
+            IN_HDMI |
+            IN_TELEPHONY_RX |
+            IN_BACK_MIC |
+            IN_REMOTE_SUBMIX |
+            IN_ANLG_DOCK_HEADSET |
+            IN_DGTL_DOCK_HEADSET |
+            IN_USB_ACCESSORY |
+            IN_USB_DEVICE |
+            IN_FM_TUNER |
+            IN_TV_TUNER |
+            IN_LINE |
+            IN_SPDIF |
+            IN_BLUETOOTH_A2DP |
+            IN_LOOPBACK |
+            IN_IP |
+            IN_BUS |
+            IN_DEFAULT),
+    IN_ALL_SCO = IN_BLUETOOTH_SCO_HEADSET,
+    IN_ALL_USB  = (IN_USB_ACCESSORY | IN_USB_DEVICE),
+};
+
+/*
+ * The audio output flags serve two purposes:
+ *
+ *  - when an AudioTrack is created they indicate a "wish" to be connected to an
+ *    output stream with attributes corresponding to the specified flags;
+ *
+ *  - when present in an output profile descriptor listed for a particular audio
+ *    hardware module, they indicate that an output stream can be opened that
+ *    supports the attributes indicated by the flags.
+ *
+ * The audio policy manager will try to match the flags in the request
+ * (when getOuput() is called) to an available output stream.
+ */
+@export(name="audio_output_flags_t", value_prefix="AUDIO_OUTPUT_FLAG_")
+enum AudioOutputFlag {
+    NONE    = 0x0, // no attributes
+    DIRECT  = 0x1, // this output directly connects a track
+                   // to one output stream: no software mixer
+    PRIMARY = 0x2, // this output is the primary output of the device. It is
+                   // unique and must be present. It is opened by default and
+                   // receives routing, audio mode and volume controls related
+                   // to voice calls.
+    FAST    = 0x4,    // output supports "fast tracks", defined elsewhere
+    DEEP_BUFFER      = 0x8,   // use deep audio buffers
+    COMPRESS_OFFLOAD = 0x10,  // offload playback of compressed streams to
+                              // hardware codec
+    NON_BLOCKING     = 0x20,  // use non-blocking write
+    HW_AV_SYNC = 0x40,   // output uses a hardware A/V sync
+    TTS        = 0x80,   // output for streams transmitted through speaker at a
+                         // sample rate high enough to accommodate lower-range
+                         // ultrasonic p/b
+    RAW        = 0x100,  // minimize signal processing
+    SYNC       = 0x200,  // synchronize I/O streams
+    IEC958_NONAUDIO = 0x400, // Audio stream contains compressed audio in SPDIF
+                             // data bursts, not PCM.
+};
+
+/*
+ * The audio input flags are analogous to audio output flags.
+ * Currently they are used only when an AudioRecord is created,
+ * to indicate a preference to be connected to an input stream with
+ * attributes corresponding to the specified flags.
+ */
+@export(name="audio_input_flags_t", value_prefix="AUDIO_INPUT_FLAG_")
+enum AudioInputFlag {
+    NONE       = 0x0,  // no attributes
+    FAST       = 0x1,  // prefer an input that supports "fast tracks"
+    HW_HOTWORD = 0x2,  // prefer an input that captures from hw hotword source
+    RAW        = 0x4,  // minimize signal processing
+    SYNC       = 0x8,  // synchronize I/O streams
+};
+
+/*
+ * Additional information about the stream passed to hardware decoders.
+ */
+struct AudioOffloadInfo {
+    uint32_t sampleRateHz;
+    AudioChannelMask channelMask;
+    AudioFormat format;
+    AudioStreamType streamType;
+    uint32_t bitRatePerSecond;
+    int64_t durationMicroseconds;  // -1 if unknown
+    bool hasVideo;
+    bool isStreaming;
+};
+
+/*
+ * Commonly used audio stream configuration parameters.
+ */
+struct AudioConfig {
+    uint32_t sampleRateHz;
+    AudioChannelMask channelMask;
+    AudioFormat format;
+    AudioOffloadInfo offloadInfo;
+    uint64_t frameCount;
+};
+
+
+/*
+ *
+ *  Volume control
+ *
+ */
+
+/*
+ * Type of gain control exposed by an audio port.
+ */
+@export(name="", value_prefix="AUDIO_GAIN_MODE_")
+enum AudioGainMode : uint32_t {
+    JOINT = 0x1,    // supports joint channel gain control
+    CHANNELS = 0x2, // supports separate channel gain control
+    RAMP = 0x4      // supports gain ramps
+};
+
+/*
+ * An audio_gain struct is a representation of a gain stage.
+ * A gain stage is always attached to an audio port.
+ */
+struct AudioGain {
+    AudioGainMode mode;
+    AudioChannelMask channelMask; // channels which gain an be controlled
+    int32_t minValue;     // minimum gain value in millibels
+    int32_t maxValue;     // maximum gain value in millibels
+    int32_t defaultValue; // default gain value in millibels
+    uint32_t stepValue;   // gain step in millibels
+    uint32_t minRampMs;   // minimum ramp duration in ms
+    uint32_t maxRampMs;   // maximum ramp duration in ms
+};
+
+/*
+ * The gain configuration structure is used to get or set the gain values of a
+ * given port.
+ */
+struct AudioGainConfig {
+    int32_t index;  // index of the corresponding AudioGain in AudioPort.gains
+    AudioGainMode mode;
+    AudioChannelMask channelMask;  // channels which gain value follows
+    /*
+     * 4 = sizeof(AudioChannelMask),
+     * 8 is not "FCC_8", so it won't need to be changed for > 8 channels.
+     * Gain values in millibels for each channel ordered from LSb to MSb in
+     * channel mask. The number of values is 1 in joint mode or
+     * popcount(channel_mask).
+     */
+    int32_t[4 * 8] values;
+    uint32_t rampDurationMs;  // ramp duration in ms
+};
+
+
+/*
+ *
+ *  Routing control
+ *
+ */
+
+/*
+ * Types defined here are used to describe an audio source or sink at internal
+ * framework interfaces (audio policy, patch panel) or at the audio HAL.
+ * Sink and sources are grouped in a concept of “audio port” representing an
+ * audio end point at the edge of the system managed by the module exposing
+ * the interface.
+ */
+
+/* Audio port role: either source or sink */
+@export(name="audio_port_role_t", value_prefix="AUDIO_PORT_ROLE_")
+enum AudioPortRole {
+    NONE,
+    SOURCE,
+    SINK,
+};
+
+/*
+ * Audio port type indicates if it is a session (e.g AudioTrack), a mix (e.g
+ * PlaybackThread output) or a physical device (e.g OUT_SPEAKER)
+ */
+@export(name="audio_port_type_t", value_prefix="AUDIO_PORT_TYPE_")
+enum AudioPortType {
+    NONE,
+    DEVICE,
+    MIX,
+    SESSION,
+};
+
+/*
+ * Extension for audio port configuration structure when the audio port is a
+ * hardware device.
+ */
+struct AudioPortConfigDeviceExt {
+    AudioModuleHandle hwModule;  // module the device is attached to
+    AudioDevice type;            // device type (e.g OUT_SPEAKER)
+    uint8_t[32] address;         // device address. "" if N/A
+};
+
+/*
+ * Extension for audio port configuration structure when the audio port is an
+ * audio session.
+ */
+struct AudioPortConfigSessionExt {
+    AudioSession session;
+};
+
+/*
+ * Flags indicating which fields are to be considered in AudioPortConfig.
+ */
+@export(name="", value_prefix="AUDIO_PORT_CONFIG_")
+enum AudioPortConfigMask : uint32_t {
+    SAMPLE_RATE = 0x1,
+    CHANNEL_MASK =  0x2,
+    FORMAT = 0x4,
+    GAIN = 0x8,
+    ALL = SAMPLE_RATE | CHANNEL_MASK | FORMAT | GAIN
+};
+
+/*
+ * Audio port configuration structure used to specify a particular configuration
+ * of an audio port.
+ */
+struct AudioPortConfig {
+    AudioPortHandle id;
+    AudioPortConfigMask configMask;
+    uint32_t sampleRateHz;
+    AudioChannelMask channelMask;
+    AudioFormat format;
+    AudioGainConfig gain;
+    AudioPortType type;  // type is used as a discriminator for Ext union
+    AudioPortRole role;  // role is used as a discriminator for UseCase union
+    union Ext {
+        AudioPortConfigDeviceExt device;
+        struct AudioPortConfigMixExt {
+            AudioModuleHandle hwModule; // module the stream is attached to
+            AudioIoHandle ioHandle;     // I/O handle of the input/output stream
+            union UseCase {
+                AudioStreamType stream;
+                AudioSource source;
+            };
+        } mix;
+        AudioPortConfigSessionExt session;
+    };
+};
+
+/*
+ * Extension for audio port structure when the audio port is a hardware device.
+ */
+struct AudioPortDeviceExt {
+    AudioModuleHandle hwModule;    // module the device is attached to
+    AudioDevice type;
+    uint8_t[32] address;
+};
+
+/*
+ * Latency class of the audio mix.
+ */
+@export(name="audio_mix_latency_class_t", value_prefix="AUDIO_LATENCY_")
+enum AudioMixLatencyClass {
+    LOW,
+    NORMAL
+} ;
+
+struct AudioPortMixExt {
+    AudioModuleHandle hwModule;     // module the stream is attached to
+    AudioIoHandle ioHandle;         // I/O handle of the stream
+    AudioMixLatencyClass latencyClass;
+};
+
+/*
+ * Extension for audio port structure when the audio port is an audio session.
+ */
+struct AudioPortSessionExt {
+    AudioSession session;
+};
+
+struct AudioPort {
+    AudioPortHandle id;
+    AudioPortRole role;
+    string name;
+    vec<uint32_t> sampleRates;
+    vec<AudioChannelMask> channelMasks;
+    vec<AudioFormat> formats;
+    vec<AudioGain> gains;
+    AudioPortConfig activeConfig; // current audio port configuration
+    AudioPortType type;  // type is used as a discriminator
+    union Ext {
+        AudioPortDeviceExt device;
+        AudioPortMixExt mix;
+        AudioPortSessionExt session;
+    };
+};
+
+/*
+ * An audio patch represents a connection between one or more source ports and
+ * one or more sink ports. Patches are connected and disconnected by audio
+ * policy manager or by applications via framework APIs.
+ */
+struct AudioPatch {
+    AudioPatchHandle id;
+    vec<AudioPortConfig> sources;
+    vec<AudioPortConfig> sinks;
+};
diff --git a/audio/effect/2.0/Android.bp b/audio/effect/2.0/Android.bp
new file mode 100644
index 0000000..4dd2b1e
--- /dev/null
+++ b/audio/effect/2.0/Android.bp
@@ -0,0 +1,151 @@
+// This file is autogenerated by hidl-gen. Do not edit manually.
+
+genrule {
+    name: "android.hardware.audio.effect@2.0_genc++",
+    tool: "hidl-gen",
+    cmd: "$tool -o $genDir -Lc++ -randroid.hardware:hardware/interfaces android.hardware.audio.effect@2.0",
+    srcs: [
+        "types.hal",
+        "IAcousticEchoCancelerEffect.hal",
+        "IAutomaticGainControlEffect.hal",
+        "IBassBoostEffect.hal",
+        "IDownmixEffect.hal",
+        "IEffect.hal",
+        "IEffectBufferProviderCallback.hal",
+        "IEffectsFactory.hal",
+        "IEnvironmentalReverbEffect.hal",
+        "IEqualizerEffect.hal",
+        "ILoudnessEnhancerEffect.hal",
+        "INoiseSuppressionEffect.hal",
+        "IPresetReverbEffect.hal",
+        "IVirtualizerEffect.hal",
+        "IVisualizerEffect.hal",
+    ],
+    out: [
+        "android/hardware/audio/effect/2.0/types.cpp",
+        "android/hardware/audio/effect/2.0/AcousticEchoCancelerEffectAll.cpp",
+        "android/hardware/audio/effect/2.0/AutomaticGainControlEffectAll.cpp",
+        "android/hardware/audio/effect/2.0/BassBoostEffectAll.cpp",
+        "android/hardware/audio/effect/2.0/DownmixEffectAll.cpp",
+        "android/hardware/audio/effect/2.0/EffectAll.cpp",
+        "android/hardware/audio/effect/2.0/EffectBufferProviderCallbackAll.cpp",
+        "android/hardware/audio/effect/2.0/EffectsFactoryAll.cpp",
+        "android/hardware/audio/effect/2.0/EnvironmentalReverbEffectAll.cpp",
+        "android/hardware/audio/effect/2.0/EqualizerEffectAll.cpp",
+        "android/hardware/audio/effect/2.0/LoudnessEnhancerEffectAll.cpp",
+        "android/hardware/audio/effect/2.0/NoiseSuppressionEffectAll.cpp",
+        "android/hardware/audio/effect/2.0/PresetReverbEffectAll.cpp",
+        "android/hardware/audio/effect/2.0/VirtualizerEffectAll.cpp",
+        "android/hardware/audio/effect/2.0/VisualizerEffectAll.cpp",
+    ],
+}
+
+genrule {
+    name: "android.hardware.audio.effect@2.0_genc++_headers",
+    tool: "hidl-gen",
+    cmd: "$tool -o $genDir -Lc++ -randroid.hardware:hardware/interfaces android.hardware.audio.effect@2.0",
+    srcs: [
+        "types.hal",
+        "IAcousticEchoCancelerEffect.hal",
+        "IAutomaticGainControlEffect.hal",
+        "IBassBoostEffect.hal",
+        "IDownmixEffect.hal",
+        "IEffect.hal",
+        "IEffectBufferProviderCallback.hal",
+        "IEffectsFactory.hal",
+        "IEnvironmentalReverbEffect.hal",
+        "IEqualizerEffect.hal",
+        "ILoudnessEnhancerEffect.hal",
+        "INoiseSuppressionEffect.hal",
+        "IPresetReverbEffect.hal",
+        "IVirtualizerEffect.hal",
+        "IVisualizerEffect.hal",
+    ],
+    out: [
+        "android/hardware/audio/effect/2.0/types.h",
+        "android/hardware/audio/effect/2.0/IAcousticEchoCancelerEffect.h",
+        "android/hardware/audio/effect/2.0/IHwAcousticEchoCancelerEffect.h",
+        "android/hardware/audio/effect/2.0/BnAcousticEchoCancelerEffect.h",
+        "android/hardware/audio/effect/2.0/BpAcousticEchoCancelerEffect.h",
+        "android/hardware/audio/effect/2.0/BsAcousticEchoCancelerEffect.h",
+        "android/hardware/audio/effect/2.0/IAutomaticGainControlEffect.h",
+        "android/hardware/audio/effect/2.0/IHwAutomaticGainControlEffect.h",
+        "android/hardware/audio/effect/2.0/BnAutomaticGainControlEffect.h",
+        "android/hardware/audio/effect/2.0/BpAutomaticGainControlEffect.h",
+        "android/hardware/audio/effect/2.0/BsAutomaticGainControlEffect.h",
+        "android/hardware/audio/effect/2.0/IBassBoostEffect.h",
+        "android/hardware/audio/effect/2.0/IHwBassBoostEffect.h",
+        "android/hardware/audio/effect/2.0/BnBassBoostEffect.h",
+        "android/hardware/audio/effect/2.0/BpBassBoostEffect.h",
+        "android/hardware/audio/effect/2.0/BsBassBoostEffect.h",
+        "android/hardware/audio/effect/2.0/IDownmixEffect.h",
+        "android/hardware/audio/effect/2.0/IHwDownmixEffect.h",
+        "android/hardware/audio/effect/2.0/BnDownmixEffect.h",
+        "android/hardware/audio/effect/2.0/BpDownmixEffect.h",
+        "android/hardware/audio/effect/2.0/BsDownmixEffect.h",
+        "android/hardware/audio/effect/2.0/IEffect.h",
+        "android/hardware/audio/effect/2.0/IHwEffect.h",
+        "android/hardware/audio/effect/2.0/BnEffect.h",
+        "android/hardware/audio/effect/2.0/BpEffect.h",
+        "android/hardware/audio/effect/2.0/BsEffect.h",
+        "android/hardware/audio/effect/2.0/IEffectBufferProviderCallback.h",
+        "android/hardware/audio/effect/2.0/IHwEffectBufferProviderCallback.h",
+        "android/hardware/audio/effect/2.0/BnEffectBufferProviderCallback.h",
+        "android/hardware/audio/effect/2.0/BpEffectBufferProviderCallback.h",
+        "android/hardware/audio/effect/2.0/BsEffectBufferProviderCallback.h",
+        "android/hardware/audio/effect/2.0/IEffectsFactory.h",
+        "android/hardware/audio/effect/2.0/IHwEffectsFactory.h",
+        "android/hardware/audio/effect/2.0/BnEffectsFactory.h",
+        "android/hardware/audio/effect/2.0/BpEffectsFactory.h",
+        "android/hardware/audio/effect/2.0/BsEffectsFactory.h",
+        "android/hardware/audio/effect/2.0/IEnvironmentalReverbEffect.h",
+        "android/hardware/audio/effect/2.0/IHwEnvironmentalReverbEffect.h",
+        "android/hardware/audio/effect/2.0/BnEnvironmentalReverbEffect.h",
+        "android/hardware/audio/effect/2.0/BpEnvironmentalReverbEffect.h",
+        "android/hardware/audio/effect/2.0/BsEnvironmentalReverbEffect.h",
+        "android/hardware/audio/effect/2.0/IEqualizerEffect.h",
+        "android/hardware/audio/effect/2.0/IHwEqualizerEffect.h",
+        "android/hardware/audio/effect/2.0/BnEqualizerEffect.h",
+        "android/hardware/audio/effect/2.0/BpEqualizerEffect.h",
+        "android/hardware/audio/effect/2.0/BsEqualizerEffect.h",
+        "android/hardware/audio/effect/2.0/ILoudnessEnhancerEffect.h",
+        "android/hardware/audio/effect/2.0/IHwLoudnessEnhancerEffect.h",
+        "android/hardware/audio/effect/2.0/BnLoudnessEnhancerEffect.h",
+        "android/hardware/audio/effect/2.0/BpLoudnessEnhancerEffect.h",
+        "android/hardware/audio/effect/2.0/BsLoudnessEnhancerEffect.h",
+        "android/hardware/audio/effect/2.0/INoiseSuppressionEffect.h",
+        "android/hardware/audio/effect/2.0/IHwNoiseSuppressionEffect.h",
+        "android/hardware/audio/effect/2.0/BnNoiseSuppressionEffect.h",
+        "android/hardware/audio/effect/2.0/BpNoiseSuppressionEffect.h",
+        "android/hardware/audio/effect/2.0/BsNoiseSuppressionEffect.h",
+        "android/hardware/audio/effect/2.0/IPresetReverbEffect.h",
+        "android/hardware/audio/effect/2.0/IHwPresetReverbEffect.h",
+        "android/hardware/audio/effect/2.0/BnPresetReverbEffect.h",
+        "android/hardware/audio/effect/2.0/BpPresetReverbEffect.h",
+        "android/hardware/audio/effect/2.0/BsPresetReverbEffect.h",
+        "android/hardware/audio/effect/2.0/IVirtualizerEffect.h",
+        "android/hardware/audio/effect/2.0/IHwVirtualizerEffect.h",
+        "android/hardware/audio/effect/2.0/BnVirtualizerEffect.h",
+        "android/hardware/audio/effect/2.0/BpVirtualizerEffect.h",
+        "android/hardware/audio/effect/2.0/BsVirtualizerEffect.h",
+        "android/hardware/audio/effect/2.0/IVisualizerEffect.h",
+        "android/hardware/audio/effect/2.0/IHwVisualizerEffect.h",
+        "android/hardware/audio/effect/2.0/BnVisualizerEffect.h",
+        "android/hardware/audio/effect/2.0/BpVisualizerEffect.h",
+        "android/hardware/audio/effect/2.0/BsVisualizerEffect.h",
+    ],
+}
+
+cc_library_shared {
+    name: "android.hardware.audio.effect@2.0",
+    generated_sources: ["android.hardware.audio.effect@2.0_genc++"],
+    generated_headers: ["android.hardware.audio.effect@2.0_genc++_headers"],
+    export_generated_headers: ["android.hardware.audio.effect@2.0_genc++_headers"],
+    shared_libs: [
+        "libhidl",
+        "libhwbinder",
+        "libutils",
+        "libcutils",
+        "android.hardware.audio.common@2.0",
+    ],
+}
diff --git a/audio/effect/2.0/IAcousticEchoCancelerEffect.hal b/audio/effect/2.0/IAcousticEchoCancelerEffect.hal
new file mode 100644
index 0000000..9e2e0c3
--- /dev/null
+++ b/audio/effect/2.0/IAcousticEchoCancelerEffect.hal
@@ -0,0 +1,32 @@
+/*
+ * Copyright (C) 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio.effect@2.0;
+
+import android.hardware.audio.common@2.0;
+import IEffect;
+
+interface IAcousticEchoCancelerEffect extends IEffect {
+    /*
+     * Sets echo delay value in milliseconds.
+     */
+    setEchoDelay(uint32_t echoDelayMs) generates (Result retval);
+
+    /*
+     * Gets echo delay value in milliseconds.
+     */
+    getEchoDelay() generates (Result retval, uint32_t echoDelayMs);
+};
diff --git a/audio/effect/2.0/IAutomaticGainControlEffect.hal b/audio/effect/2.0/IAutomaticGainControlEffect.hal
new file mode 100644
index 0000000..a02002d
--- /dev/null
+++ b/audio/effect/2.0/IAutomaticGainControlEffect.hal
@@ -0,0 +1,68 @@
+/*
+ * Copyright (C) 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio.effect@2.0;
+
+import android.hardware.audio.common@2.0;
+import IEffect;
+
+interface IAutomaticGainControlEffect extends IEffect {
+    /*
+     * Sets target level in millibels.
+     */
+    setTargetLevel(int16_t targetLevelMb) generates (Result retval);
+
+    /*
+     * Gets target level.
+     */
+    getTargetLevel() generates (Result retval, int16_t targetLevelMb);
+
+    /*
+     * Sets gain in the compression range in millibels.
+     */
+    setCompGain(int16_t compGainMb) generates (Result retval);
+
+    /*
+     * Gets gain in the compression range.
+     */
+    getCompGain() generates (Result retval, int16_t compGainMb);
+
+    /*
+     * Enables or disables limiter.
+     */
+    setLimiterEnabled(bool enabled) generates (Result retval);
+
+    /*
+     * Returns whether limiter is enabled.
+     */
+    isLimiterEnabled() generates (Result retval, bool enabled);
+
+    struct AllProperties {
+        int16_t targetLevelMb;
+        int16_t compGainMb;
+        bool limiterEnabled;
+    };
+
+    /*
+     * Sets all properties at once.
+     */
+    setAllProperties(AllProperties properties) generates (Result retval);
+
+    /*
+     * Gets all properties at once.
+     */
+    getAllProperties() generates (Result retval, AllProperties properties);
+};
diff --git a/audio/effect/2.0/IBassBoostEffect.hal b/audio/effect/2.0/IBassBoostEffect.hal
new file mode 100644
index 0000000..bcf7b7d
--- /dev/null
+++ b/audio/effect/2.0/IBassBoostEffect.hal
@@ -0,0 +1,48 @@
+/*
+ * Copyright (C) 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio.effect@2.0;
+
+import android.hardware.audio.common@2.0;
+import IEffect;
+
+interface IBassBoostEffect extends IEffect {
+    /*
+     * Returns whether setting bass boost strength is supported.
+     */
+    isStrengthSupported() generates (Result retval, bool strengthSupported);
+
+    enum StrengthRange : uint16_t {
+        MIN = 0,
+        MAX = 1000
+    };
+
+    /*
+     * Sets bass boost strength.
+     *
+     * @param strength strength of the effect. The valid range for strength
+     *                 strength is [0, 1000], where 0 per mille designates the
+     *                 mildest effect and 1000 per mille designates the
+     *                 strongest.
+     * @return retval operation completion status.
+     */
+    setStrength(uint16_t strength) generates (Result retval);
+
+    /*
+     * Gets virtualization strength.
+     */
+    getStrength() generates (Result retval, uint16_t strength);
+};
diff --git a/audio/effect/2.0/IDownmixEffect.hal b/audio/effect/2.0/IDownmixEffect.hal
new file mode 100644
index 0000000..817e14c
--- /dev/null
+++ b/audio/effect/2.0/IDownmixEffect.hal
@@ -0,0 +1,31 @@
+/*
+ * Copyright (C) 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio.effect@2.0;
+
+import android.hardware.audio.common@2.0;
+import IEffect;
+
+interface IDownmixEffect extends IEffect {
+    enum Type {
+        STRIP, // throw away the extra channels
+        FOLD   // mix the extra channels with FL/FR
+    };
+
+    setType(Type preset) generates (Result retval);
+
+    getType() generates (Result retval, Type preset);
+};
diff --git a/audio/effect/2.0/IEffect.hal b/audio/effect/2.0/IEffect.hal
new file mode 100644
index 0000000..f1cc795
--- /dev/null
+++ b/audio/effect/2.0/IEffect.hal
@@ -0,0 +1,311 @@
+/*
+ * Copyright (C) 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio.effect@2.0;
+
+import android.hardware.audio.common@2.0;
+import IEffectBufferProviderCallback;
+
+interface IEffect {
+    /*
+     * Initialize effect engine--all configurations return to default.
+     *
+     * @return retval operation completion status.
+     */
+    @entry
+    @callflow(next={"*"})
+    init() generates (Result retval);
+
+    /*
+     * Apply new audio parameters configurations for input and output buffers.
+     * The provider callbacks may be empty, but in this case the buffer
+     * must be provided in the EffectConfig structure.
+     *
+     * @param config configuration descriptor.
+     * @param inputBufferProvider optional buffer provider reference.
+     * @param outputBufferProvider optional buffer provider reference.
+     * @return retval operation completion status.
+     */
+    @callflow(next={"*"})
+    setConfig(EffectConfig config,
+            IEffectBufferProviderCallback inputBufferProvider,
+            IEffectBufferProviderCallback outputBufferProvider)
+            generates (Result retval);
+
+    /*
+     * Reset the effect engine. Keep configuration but resets state and buffer
+     * content.
+     */
+    @callflow(next={"*"})
+    reset();
+
+    /*
+     * Enable processing.
+     *
+     * @return retval operation completion status.
+     */
+    @callflow(next={"process"})
+    enable() generates (Result retval);
+
+    /*
+     * Disable processing.
+     *
+     * @return retval operation completion status.
+     */
+    @exit
+    disable() generates (Result retval);
+
+    /*
+     * Set the rendering device the audio output path is connected to.  The
+     * effect implementation must set EFFECT_FLAG_DEVICE_IND flag in its
+     * descriptor to receive this command when the device changes.
+     *
+     * @param device output device specification.
+     */
+    @callflow(next={"*"})
+    setDevice(AudioDevice device);
+
+    /*
+     * Set and get volume. Used by audio framework to delegate volume control to
+     * effect engine.  The effect implementation must set EFFECT_FLAG_VOLUME_IND
+     * or EFFECT_FLAG_VOLUME_CTRL flag in its descriptor to receive this command
+     * before every call to 'process' function If EFFECT_FLAG_VOLUME_CTRL flag
+     * is set in the effect descriptor, the effect engine must return the volume
+     * that should be applied before the effect is processed. The overall volume
+     * (the volume actually applied by the effect engine multiplied by the
+     * returned value) should match the value indicated in the command.
+     *
+     * @param volumes vector containing volume for each channel defined in
+     *                EffectConfig for output buffer expressed in 8.24 fixed
+     *                point format.
+     * @return result updated volume values. It is OK to receive an empty vector
+     *                as a result in which case the effect framework has
+     *                delegated volume control to another effect.
+     */
+    @callflow(next={"*"})
+    setAndGetVolume(vec<int32_t> volumes) generates (vec<int32_t> result);
+
+    /*
+     * Set the audio mode. The effect implementation must set
+     * EFFECT_FLAG_AUDIO_MODE_IND flag in its descriptor to receive this command
+     * when the audio mode changes.
+     *
+     * @param mode desired audio mode.
+     */
+    @callflow(next={"*"})
+    setAudioMode(AudioMode mode);
+
+    /*
+     * Apply new audio parameters configurations for input and output buffers of
+     * reverse stream.  An example of reverse stream is the echo reference
+     * supplied to an Acoustic Echo Canceler.
+     *
+     * @param config configuration descriptor.
+     * @param inputBufferProvider optional buffer provider reference.
+     * @param outputBufferProvider optional buffer provider reference.
+     * @return retval operation completion status.
+     */
+    @callflow(next={"*"})
+    setConfigReverse(EffectConfig config,
+            IEffectBufferProviderCallback inputBufferProvider,
+            IEffectBufferProviderCallback outputBufferProvider)
+            generates (Result retval);
+
+    /*
+     * Set the capture device the audio input path is connected to. The effect
+     * implementation must set EFFECT_FLAG_DEVICE_IND flag in its descriptor to
+     * receive this command when the device changes.
+     *
+     * @param device input device specification.
+     */
+    @callflow(next={"*"})
+    setInputDevice(AudioDevice device);
+
+    /*
+     * Read audio parameters configurations for input and output buffers.
+     *
+     * @return config configuration descriptor.
+     */
+    @callflow(next={"*"})
+    getConfig() generates (EffectConfig config);
+
+    /*
+     * Read audio parameters configurations for input and output buffers of
+     * reverse stream.
+     *
+     * @return config configuration descriptor.
+     */
+    @callflow(next={"*"})
+    getConfigReverse() generates (EffectConfig config);
+
+    /*
+     * Queries for supported configurations for a particular feature (e.g. get
+     * the supported combinations of main and auxiliary channels for a noise
+     * suppressor).  The command parameter is a list of the feature identifiers.
+     *
+     * @return retval absence of the feature support is indicated using
+     *                NOT_SUPPORTED code.
+     * @return result list of configuration descriptors.
+     */
+    @callflow(next={"*"})
+    getFeatureSupportedConfigs(vec<EffectFeature> features)
+            generates (Result retval, vec<EffectFeatureConfig> result);
+
+    /*
+     * Retrieves current configuration for a given feature.
+     *
+     * @return retval absence of the feature support is indicated using
+     *                NOT_SUPPORTED code.
+     * @return result configuration descriptor.
+     */
+    @callflow(next={"*"})
+    getFeatureConfig(EffectFeature feature)
+            generates (Result retval, EffectFeatureConfig result);
+
+    /*
+     * Sets current configuration for a given feature.
+     *
+     * @return retval operation completion status.
+     */
+    @callflow(next={"*"})
+    setFeatureConfig(EffectFeatureConfig featureConfig)
+            generates (Result retval);
+
+    /*
+     * Set the audio source the capture path is configured for (Camcorder, voice
+     * recognition...).
+     *
+     * @param source source descriptor.
+     */
+    @callflow(next={"*"})
+    setAudioSource(AudioSource source);
+
+    /*
+     * This command indicates if the playback thread the effect is attached to
+     * is offloaded or not, and updates the I/O handle of the playback thread
+     * the effect is attached to.
+     *
+     * @param param effect offload descriptor.
+     * @return retval operation completion status.
+     */
+    @callflow(next={"*"})
+    offload(EffectOffloadParameter param) generates (Result retval);
+
+    /*
+     * Returns the effect descriptor.
+     *
+     * @return descriptor effect descriptor.
+     */
+    @callflow(next={"*"})
+    getDescriptor() generates (EffectDescriptor descriptor);
+
+    /*
+     * Effect process function. Takes input samples as specified (count and
+     * location) in input buffer and returns processed samples as specified in
+     * output buffer. If the buffer descriptor is empty the function must use
+     * either the buffer or the buffer provider callback installed by the
+     * setConfig command.  The effect framework must call the 'process' function
+     * after the 'enable' command is received and until the 'disable' is
+     * received. When the engine receives the 'disable' command it should turn
+     * off the effect gracefully and when done indicate that it is OK to stop
+     * calling the 'process' function by returning the INVALID_STATE status.
+     *
+     * @param inBuffer input audio buffer.
+     * @return retval operation completion status.
+     * @return outBuffer output audio buffer.
+     */
+    // TODO(mnaganov): replace with FMQ version.
+    @callflow(next={"*"})
+    process(AudioBuffer inBuffer)
+            generates (Result retval, AudioBuffer outBuffer);
+
+    /*
+     * Process reverse stream function. This function is used to pass a
+     * reference stream to the effect engine. If the engine does not need a
+     * reference stream, this function MUST return NOT_SUPPORTED. For example,
+     * this function would typically implemented by an Echo Canceler.
+     *
+     * @param inBuffer input audio buffer.
+     * @return retval operation completion status.
+     * @return outBuffer output audio buffer.
+     */
+    // TODO(mnaganov): replace with FMQ version.
+    @callflow(next={"*"})
+    processReverse(AudioBuffer inBuffer)
+            generates (Result retval, AudioBuffer outBuffer);
+
+    /*
+     * Execute a vendor specific command on the effect. The command code
+     * and data, as well as result data are not interpreted by Android
+     * Framework and are passed as-is between the application and the effect.
+     *
+     * The effect must use standard POSIX.1-2001 error codes for the operation
+     * completion status.
+     *
+     * Use this method only if the effect is provided by a third party, and
+     * there is no interface defined for it. This method only works for effects
+     * implemented in software.
+     *
+     * @param commandId the ID of the command.
+     * @param data command data.
+     * @return status command completion status.
+     * @return result result data.
+     */
+    command(uint32_t commandId, vec<uint8_t> data)
+            generates (int32_t status, vec<uint8_t> result);
+
+    /*
+     * Set a vendor-specific parameter and apply it immediately. The parameter
+     * code and data are not interpreted by Android Framework and are passed
+     * as-is between the application and the effect.
+     *
+     * The effect must use INVALID_ARGUMENTS return code if the parameter ID is
+     * unknown or if provided parameter data is invalid. If the effect does not
+     * support setting vendor-specific parameters, it must return NOT_SUPPORTED.
+     *
+     * Use this method only if the effect is provided by a third party, and
+     * there is no interface defined for it. This method only works for effects
+     * implemented in software.
+     *
+     * @param parameter identifying data of the parameter.
+     * @param value the value of the parameter.
+     * @return retval operation completion status.
+     */
+    @callflow(next={"*"})
+    setParameter(vec<uint8_t> parameter, vec<uint8_t> value)
+            generates (Result retval);
+
+    /*
+     * Get a vendor-specific parameter value. The parameter code and returned
+     * data are not interpreted by Android Framework and are passed as-is
+     * between the application and the effect.
+     *
+     * The effect must use INVALID_ARGUMENTS return code if the parameter ID is
+     * unknown. If the effect does not support setting vendor-specific
+     * parameters, it must return NOT_SUPPORTED.
+     *
+     * Use this method only if the effect is provided by a third party, and
+     * there is no interface defined for it.  This method only works for effects
+     * implemented in software.
+     *
+     * @param parameter identifying data of the parameter.
+     * @return retval operation completion status.
+     * @return result the value of the parameter.
+     */
+    @callflow(next={"*"})
+    getParameter(vec<uint8_t> parameter)
+            generates (Result retval, vec<uint8_t> value);
+};
diff --git a/audio/effect/2.0/IEffectBufferProviderCallback.hal b/audio/effect/2.0/IEffectBufferProviderCallback.hal
new file mode 100644
index 0000000..545e2e5
--- /dev/null
+++ b/audio/effect/2.0/IEffectBufferProviderCallback.hal
@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio.effect@2.0;
+
+/*
+ * This callback interface contains functions that can be used by the effect
+ * engine 'process' function to exchange input and output audio buffers.
+ */
+interface IEffectBufferProviderCallback {
+    /*
+     * Called to retrieve a buffer where data should read from by 'process'
+     * function.
+     *
+     * @return buffer audio buffer for processing
+     */
+    // TODO(mnaganov): replace with FMQ version.
+    getBuffer() generates (AudioBuffer buffer);
+
+    /*
+     * Called to provide a buffer with the data written by 'process' function.
+     *
+     * @param buffer audio buffer for processing
+     */
+    // TODO(mnaganov): replace with FMQ version.
+    putBuffer(AudioBuffer buffer);
+};
diff --git a/audio/effect/2.0/IEffectsFactory.hal b/audio/effect/2.0/IEffectsFactory.hal
new file mode 100644
index 0000000..6763825
--- /dev/null
+++ b/audio/effect/2.0/IEffectsFactory.hal
@@ -0,0 +1,64 @@
+/*
+ * Copyright (C) 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio.effect@2.0;
+
+import android.hardware.audio.common@2.0;
+import IEffect;
+
+interface IEffectsFactory {
+    /*
+     * Returns descriptors of different effects in all loaded libraries.
+     *
+     * @return retval operation completion status.
+     * @return result list of effect descriptors.
+     */
+    getAllDescriptors() generates(Result retval, vec<EffectDescriptor> result);
+
+    /*
+     * Returns a descriptor of a particular effect.
+     *
+     * @return retval operation completion status.
+     * @return result effect descriptor.
+     */
+    getDescriptor(Uuid uid) generates(Result retval, EffectDescriptor result);
+
+    /*
+     * Creates an effect engine of the specified type.  To release the effect
+     * engine, it is necessary to release references to the returned effect
+     * object.
+     *
+     * @param uid effect uuid.
+     * @param session audio session to which this effect instance will be
+     *                attached.  All effects created with the same session ID
+     *                are connected in series and process the same signal
+     *                stream.
+     * @param ioHandle identifies the output or input stream this effect is
+     *                 directed to in audio HAL.
+     * @return retval operation completion status.
+     * @return result the interface for the created effect.
+     */
+    createEffect(Uuid uid, AudioSession session, AudioIoHandle ioHandle)
+            generates (Result retval, IEffect result);
+
+    /*
+     * Dumps information about effects into the provided file descriptor.
+     * This is used for the dumpsys facility.
+     *
+     * @param fd dump file descriptor.
+     */
+    debugDump(handle fd);
+};
diff --git a/audio/effect/2.0/IEnvironmentalReverbEffect.hal b/audio/effect/2.0/IEnvironmentalReverbEffect.hal
new file mode 100644
index 0000000..bd7aeeb
--- /dev/null
+++ b/audio/effect/2.0/IEnvironmentalReverbEffect.hal
@@ -0,0 +1,168 @@
+/*
+ * Copyright (C) 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio.effect@2.0;
+
+import android.hardware.audio.common@2.0;
+import IEffect;
+
+interface IEnvironmentalReverbEffect extends IEffect {
+    /*
+     * Sets whether the effect should be bypassed.
+     */
+    setBypass(bool bypass) generates (Result retval);
+
+    /*
+     * Gets whether the effect should be bypassed.
+     */
+    getBypass() generates (Result retval, bool bypass);
+
+    enum ParamRange : int16_t {
+        ROOM_LEVEL_MIN = -6000,
+        ROOM_LEVEL_MAX = 0,
+        ROOM_HF_LEVEL_MIN = -4000,
+        ROOM_HF_LEVEL_MAX = 0,
+        DECAY_TIME_MIN = 100,
+        DECAY_TIME_MAX = 20000,
+        DECAY_HF_RATIO_MIN = 100,
+        DECAY_HF_RATIO_MAX = 1000,
+        REFLECTIONS_LEVEL_MIN = -6000,
+        REFLECTIONS_LEVEL_MAX = 0,
+        REFLECTIONS_DELAY_MIN = 0,
+        REFLECTIONS_DELAY_MAX = 65,
+        REVERB_LEVEL_MIN = -6000,
+        REVERB_LEVEL_MAX = 0,
+        REVERB_DELAY_MIN = 0,
+        REVERB_DELAY_MAX = 65,
+        DIFFUSION_MIN = 0,
+        DIFFUSION_MAX = 1000,
+        DENSITY_MIN = 0,
+        DENSITY_MAX = 1000
+    };
+
+    /*
+     * Sets the room level.
+     */
+    setRoomLevel(int16_t roomLevel) generates (Result retval);
+
+    /*
+     * Gets the room level.
+     */
+    getRoomLevel() generates (Result retval, int16_t roomLevel);
+
+    /*
+     * Sets the room high frequences level.
+     */
+    setRoomHfLevel(int16_t roomHfLevel) generates (Result retval);
+
+    /*
+     * Gets the room high frequences level.
+     */
+    getRoomHfLevel() generates (Result retval, int16_t roomHfLevel);
+
+    /*
+     * Sets the room decay time.
+     */
+    setDecayTime(uint32_t decayTime) generates (Result retval);
+
+    /*
+     * Gets the room decay time.
+     */
+    getDecayTime() generates (Result retval, uint32_t decayTime);
+
+    /*
+     * Sets the ratio of high frequences decay.
+     */
+    setDecayHfRatio(int16_t decayHfRatio) generates (Result retval);
+
+    /*
+     * Gets the ratio of high frequences decay.
+     */
+    getDecayHfRatio() generates (Result retval, int16_t decayHfRatio);
+
+    /*
+     * Sets the level of reflections in the room.
+     */
+    setReflectionsLevel(int16_t reflectionsLevel) generates (Result retval);
+
+    /*
+     * Gets the level of reflections in the room.
+     */
+    getReflectionsLevel() generates (Result retval, int16_t reflectionsLevel);
+
+    /*
+     * Sets the reflections delay in the room.
+     */
+    setReflectionsDelay(uint32_t reflectionsDelay) generates (Result retval);
+
+    /*
+     * Gets the reflections delay in the room.
+     */
+    getReflectionsDelay() generates (Result retval, uint32_t reflectionsDelay);
+
+    /*
+     * Sets the reverb level of the room.
+     */
+    setReverbLevel(int16_t reverbLevel) generates (Result retval);
+
+    /*
+     * Gets the reverb level of the room.
+     */
+    getReverbLevel() generates (Result retval, int16_t reverbLevel);
+
+    /*
+     * Sets room diffusion.
+     */
+    setDiffusion(int16_t diffusion) generates (Result retval);
+
+    /*
+     * Gets room diffusion.
+     */
+    getDiffusion() generates (Result retval, int16_t diffusion);
+
+    /*
+     * Sets room wall density.
+     */
+    setDensity(int16_t density) generates (Result retval);
+
+    /*
+     * Gets room wall density.
+     */
+    getDensity() generates (Result retval, int16_t density);
+
+    struct AllProperties {
+        int16_t  roomLevel;         // in millibels,    range -6000 to 0
+        int16_t  roomHfLevel;       // in millibels,    range -4000 to 0
+        uint32_t decayTime;         // in milliseconds, range 100 to 20000
+        int16_t  decayHfRatio;      // in permilles,    range 100 to 1000
+        int16_t  reflectionsLevel;  // in millibels,    range -6000 to 0
+        uint32_t reflectionsDelay;  // in milliseconds, range 0 to 65
+        int16_t  reverbLevel;       // in millibels,    range -6000 to 0
+        uint32_t reverbDelay;       // in milliseconds, range 0 to 65
+        int16_t  diffusion;         // in permilles,    range 0 to 1000
+        int16_t  density;           // in permilles,    range 0 to 1000
+    };
+
+    /*
+     * Sets all properties at once.
+     */
+    setAllProperties(AllProperties properties) generates (Result retval);
+
+    /*
+     * Gets all properties at once.
+     */
+    getAllProperties() generates (Result retval, AllProperties properties);
+};
diff --git a/audio/effect/2.0/IEqualizerEffect.hal b/audio/effect/2.0/IEqualizerEffect.hal
new file mode 100644
index 0000000..afcc4b6
--- /dev/null
+++ b/audio/effect/2.0/IEqualizerEffect.hal
@@ -0,0 +1,91 @@
+/*
+ * Copyright (C) 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio.effect@2.0;
+
+import android.hardware.audio.common@2.0;
+import IEffect;
+
+interface IEqualizerEffect extends IEffect {
+    /*
+     * Gets the number of frequency bands that the equalizer supports.
+     */
+    getNumBands() generates (Result retval, uint16_t numBands);
+
+    /*
+     * Returns the minimum and maximum band levels supported.
+     */
+    getLevelRange()
+            generates (Result retval, uint16_t minLevel, uint16_t maxLevel);
+
+    /*
+     * Sets the gain for the given equalizer band.
+     */
+    setBandLevel(uint16_t band, uint16_t level) generates (Result retval);
+
+    /*
+     * Gets the gain for the given equalizer band.
+     */
+    getBandLevel(uint16_t band) generates (Result retval, uint16_t level);
+
+    /*
+     * Gets the center frequency of the given band.
+     */
+    getBandCenterFrequency(uint16_t band)
+            generates (Result retval, uint32_t centerFreq);
+
+    /*
+     * Gets the frequency range of the given frequency band.
+     */
+    getBandFrequencyRange(uint16_t band)
+            generates (Result retval, uint32_t minFreqHz, uint32_t maxFreqHz);
+
+    /*
+     * Gets the band that has the most effect on the given frequency.
+     */
+    getBandForFrequency(uint32_t freq) generates (Result retval, uint16_t band);
+
+    /*
+     * Gets the names of all presets the equalizer supports.
+     */
+    getPresetNames() generates (Result retval, vec<string> names);
+
+    /*
+     * Sets the current preset using the index of the preset in the names
+     * vector returned via 'getPresetNames'.
+     */
+    setCurrentPreset(uint16_t preset) generates (Result retval);
+
+    /*
+     * Gets the current preset.
+     */
+    getCurrentPreset() generates (Result retval, uint16_t preset);
+
+    struct AllProperties {
+        uint16_t curPreset;
+        vec<uint16_t> bandLevels;
+    };
+
+    /*
+     * Sets all properties at once.
+     */
+    setAllProperties(AllProperties properties) generates (Result retval);
+
+    /*
+     * Gets all properties at once.
+     */
+    getAllProperties() generates (Result retval, AllProperties properties);
+};
diff --git a/audio/effect/2.0/ILoudnessEnhancerEffect.hal b/audio/effect/2.0/ILoudnessEnhancerEffect.hal
new file mode 100644
index 0000000..3e1ee4e
--- /dev/null
+++ b/audio/effect/2.0/ILoudnessEnhancerEffect.hal
@@ -0,0 +1,32 @@
+/*
+ * Copyright (C) 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio.effect@2.0;
+
+import android.hardware.audio.common@2.0;
+import IEffect;
+
+interface ILoudnessEnhancerEffect extends IEffect {
+    /*
+     * Sets target gain expressed in millibels.
+     */
+    setTargetGain(int32_t targetGainMb) generates (Result retval);
+
+    /*
+     * Gets target gain expressed in millibels.
+     */
+    getTargetGain() generates (Result retval, int32_t targetGainMb);
+};
diff --git a/audio/effect/2.0/INoiseSuppressionEffect.hal b/audio/effect/2.0/INoiseSuppressionEffect.hal
new file mode 100644
index 0000000..58e439f
--- /dev/null
+++ b/audio/effect/2.0/INoiseSuppressionEffect.hal
@@ -0,0 +1,68 @@
+/*
+ * Copyright (C) 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio.effect@2.0;
+
+import android.hardware.audio.common@2.0;
+import IEffect;
+
+interface INoiseSuppressionEffect extends IEffect {
+    enum Level {
+        LOW,
+        MEDIUM,
+        HIGH
+    };
+
+    /*
+     * Sets suppression level.
+     */
+    setSuppressionLevel(Level level) generates (Result retval);
+
+    /*
+     * Gets suppression level.
+     */
+    getSuppressionLevel() generates (Result retval, Level level);
+
+    enum Type {
+        SINGLE_CHANNEL,
+        MULTI_CHANNEL
+    };
+
+    /*
+     * Set suppression type.
+     */
+    setSuppressionType(Type type) generates (Result retval);
+
+    /*
+     * Get suppression type.
+     */
+    getSuppressionType() generates (Result retval, Type type);
+
+    struct AllProperties {
+        Level level;
+        Type type;
+    };
+
+    /*
+     * Sets all properties at once.
+     */
+    setAllProperties(AllProperties properties) generates (Result retval);
+
+    /*
+     * Gets all properties at once.
+     */
+    getAllProperties() generates (Result retval, AllProperties properties);
+};
diff --git a/audio/effect/2.0/IPresetReverbEffect.hal b/audio/effect/2.0/IPresetReverbEffect.hal
new file mode 100644
index 0000000..58dfd40
--- /dev/null
+++ b/audio/effect/2.0/IPresetReverbEffect.hal
@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio.effect@2.0;
+
+import android.hardware.audio.common@2.0;
+import IEffect;
+
+interface IPresetReverbEffect extends IEffect {
+    enum Preset {
+        NONE,        // no reverb or reflections
+        SMALLROOM,   // a small room less than five meters in length
+        MEDIUMROOM,  // a medium room with a length of ten meters or less
+        LARGEROOM,   // a large-sized room suitable for live performances
+        MEDIUMHALL,  // a medium-sized hall
+        LARGEHALL,   // a large-sized hall suitable for a full orchestra
+        PLATE,       // synthesis of the traditional plate reverb
+        LAST = PLATE
+    };
+
+    setPreset(Preset preset) generates (Result retval);
+
+    getPreset() generates (Result retval, Preset preset);
+};
diff --git a/audio/effect/2.0/IVirtualizerEffect.hal b/audio/effect/2.0/IVirtualizerEffect.hal
new file mode 100644
index 0000000..2b7116c
--- /dev/null
+++ b/audio/effect/2.0/IVirtualizerEffect.hal
@@ -0,0 +1,76 @@
+/*
+ * Copyright (C) 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio.effect@2.0;
+
+import android.hardware.audio.common@2.0;
+import IEffect;
+
+interface IVirtualizerEffect extends IEffect {
+    /*
+     * Returns whether setting virtualization strength is supported.
+     */
+    isStrengthSupported() generates (bool strengthSupported);
+
+    enum StrengthRange : uint16_t {
+        MIN = 0,
+        MAX = 1000
+    };
+
+    /*
+     * Sets virtualization strength.
+     *
+     * @param strength strength of the effect. The valid range for strength
+     *                 strength is [0, 1000], where 0 per mille designates the
+     *                 mildest effect and 1000 per mille designates the
+     *                 strongest.
+     * @return retval operation completion status.
+     */
+    setStrength(uint16_t strength) generates (Result retval);
+
+    /*
+     * Gets virtualization strength.
+     */
+    getStrength() generates (Result retval, uint16_t strength);
+
+    struct SpeakerAngle {
+        AudioChannelMask mask; // speaker channel mask (1 bit set).
+        // all angles are expressed in degrees and
+        // are relative to the listener.
+        int16_t azimuth; // 0 is the direction the listener faces
+                         // 180 is behind the listener
+                         // -90 is to their left
+        int16_t elevation; // 0 is the horizontal plane
+                           // +90 is above the listener, -90 is below
+    };
+    /*
+     * Retrieves virtual speaker angles for the given channel mask on the
+     * specified device.
+     */
+    getVirtualSpeakerAngles(AudioChannelMask mask, AudioDevice device)
+            generates (Result retval, vec<SpeakerAngle> speakerAngles);
+
+    /*
+     * Forces the virtualizer effect for the given output device.
+     */
+    forceVirtualizationMode(AudioDevice device) generates (Result retval);
+
+    /*
+     * Returns audio device reflecting the current virtualization mode,
+     * AUDIO_DEVICE_NONE when not virtualizing.
+     */
+    getVirtualizationMode() generates (Result retval, AudioDevice device);
+};
diff --git a/audio/effect/2.0/IVisualizerEffect.hal b/audio/effect/2.0/IVisualizerEffect.hal
new file mode 100644
index 0000000..2a7ddb8
--- /dev/null
+++ b/audio/effect/2.0/IVisualizerEffect.hal
@@ -0,0 +1,110 @@
+/*
+ * Copyright (C) 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio.effect@2.0;
+
+import android.hardware.audio.common@2.0;
+import IEffect;
+
+interface IVisualizerEffect extends IEffect {
+    enum CaptureSizeRange {
+        MAX = 1024,  // maximum capture size in samples
+        MIN = 128    // minimum capture size in samples
+    };
+
+    /*
+     * Sets the number PCM samples in the capture.
+     */
+    setCaptureSize(uint16_t captureSize) generates (Result retval);
+
+    /*
+     * Gets the number PCM samples in the capture.
+     */
+    getCaptureSize() generates (Result retval, uint16_t captureSize);
+
+    enum ScalingMode {
+        // Keep in sync with
+        // frameworks/base/media/java/android/media/audiofx/Visualizer.java
+        SCALING_MODE_NORMALIZED = 0,
+        SCALING_MODE_AS_PLAYED = 1
+    };
+
+    /*
+     * Specifies the way the captured data is scaled.
+     */
+    setScalingMode(ScalingMode scalingMode) generates (Result retval);
+
+    /*
+     * Retrieves the way the captured data is scaled.
+     */
+    getScalingMode() generates (Result retval, ScalingMode scalingMode);
+
+    /*
+     * Informs the visualizer about the downstream latency.
+     */
+    setLatency(uint32_t latencyMs) generates (Result retval);
+
+    /*
+     * Gets the downstream latency.
+     */
+    getLatency() generates (Result retval, uint32_t latencyMs);
+
+    enum MeasurementMode {
+        // Keep in sync with
+        // frameworks/base/media/java/android/media/audiofx/Visualizer.java
+        MEASUREMENT_MODE_NONE = 0x0,
+        MEASUREMENT_MODE_PEAK_RMS = 0x1
+    };
+
+    /*
+     * Specifies which measurements are to be made.
+     */
+    setMeasurementMode(MeasurementMode measurementMode)
+            generates (Result retval);
+
+    /*
+     * Retrieves which measurements are to be made.
+     */
+    getMeasurementMode() generates (
+            Result retval, MeasurementMode measurementMode);
+
+    /*
+     * Retrieves the latest PCM snapshot captured by the visualizer engine.  The
+     * number of samples to capture is specified by 'setCaptureSize' parameter.
+     *
+     * @return retval operation completion status.
+     * @return samples samples in 8 bit unsigned format (0 = 0x80)
+     */
+    capture() generates (Result retval, vec<uint8_t> samples);
+
+    struct Measurement {
+        MeasurementMode mode;    // discriminator
+        union Values {
+            struct PeakAndRms {
+                int32_t peakMb;  // millibels
+                int32_t rmsMb;   // millibels
+            } peakAndRms;
+        };
+    };
+    /*
+     * Retrieves the lastest measurements. The measurements to be made
+     * are specified by 'setMeasurementMode' parameter.
+     *
+     * @return retval operation completion status.
+     * @return result measurement.
+     */
+    measure() generates (Result retval, Measurement result);
+};
diff --git a/audio/effect/2.0/types.hal b/audio/effect/2.0/types.hal
new file mode 100644
index 0000000..82f6766
--- /dev/null
+++ b/audio/effect/2.0/types.hal
@@ -0,0 +1,285 @@
+/*
+ * Copyright (C) 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio.effect@2.0;
+
+import android.hardware.audio.common@2.0;
+
+enum Result {
+    OK,
+    NOT_INITIALIZED,
+    INVALID_ARGUMENTS,
+    INVALID_STATE,
+    NOT_SUPPORTED
+};
+
+/*
+ * Effect engine capabilities/requirements flags.
+ *
+ * Definitions for flags field of effect descriptor.
+ *
+ * +----------------+--------+--------------------------------------------------
+ * | description    | bits   | values
+ * +----------------+--------+--------------------------------------------------
+ * | connection     | 0..2   | 0 insert: after track process
+ * | mode           |        | 1 auxiliary: connect to track auxiliary
+ * |                |        |  output and use send level
+ * |                |        | 2 replace: replaces track process function;
+ * |                |        |   must implement SRC, volume and mono to stereo.
+ * |                |        | 3 pre processing: applied below audio HAL on in
+ * |                |        | 4 post processing: applied below audio HAL on out
+ * |                |        | 5 - 7 reserved
+ * +----------------+--------+--------------------------------------------------
+ * | insertion      | 3..5   | 0 none
+ * | preference     |        | 1 first of the chain
+ * |                |        | 2 last of the chain
+ * |                |        | 3 exclusive (only effect in the insert chain)
+ * |                |        | 4..7 reserved
+ * +----------------+--------+--------------------------------------------------
+ * | Volume         | 6..8   | 0 none
+ * | management     |        | 1 implements volume control
+ * |                |        | 2 requires volume indication
+ * |                |        | 4 reserved
+ * +----------------+--------+--------------------------------------------------
+ * | Device         | 9..11  | 0 none
+ * | indication     |        | 1 requires device updates
+ * |                |        | 2, 4 reserved
+ * +----------------+--------+--------------------------------------------------
+ * | Sample input   | 12..13 | 1 direct: process() function or
+ * | mode           |        |   EFFECT_CMD_SET_CONFIG command must specify
+ * |                |        |   a buffer descriptor
+ * |                |        | 2 provider: process() function uses the
+ * |                |        |   bufferProvider indicated by the
+ * |                |        |   EFFECT_CMD_SET_CONFIG command to request input.
+ * |                |        |   buffers.
+ * |                |        | 3 both: both input modes are supported
+ * +----------------+--------+--------------------------------------------------
+ * | Sample output  | 14..15 | 1 direct: process() function or
+ * | mode           |        |   EFFECT_CMD_SET_CONFIG command must specify
+ * |                |        |   a buffer descriptor
+ * |                |        | 2 provider: process() function uses the
+ * |                |        |   bufferProvider indicated by the
+ * |                |        |   EFFECT_CMD_SET_CONFIG command to request output
+ * |                |        |   buffers.
+ * |                |        | 3 both: both output modes are supported
+ * +----------------+--------+--------------------------------------------------
+ * | Hardware       | 16..17 | 0 No hardware acceleration
+ * | acceleration   |        | 1 non tunneled hw acceleration: the process()
+ * |                |        |   function reads the samples, send them to HW
+ * |                |        |   accelerated effect processor, reads back
+ * |                |        |   the processed samples and returns them
+ * |                |        |   to the output buffer.
+ * |                |        | 2 tunneled hw acceleration: the process()
+ * |                |        |   function is transparent. The effect interface
+ * |                |        |   is only used to control the effect engine.
+ * |                |        |   This mode is relevant for global effects
+ * |                |        |   actually applied by the audio hardware on
+ * |                |        |   the output stream.
+ * +----------------+--------+--------------------------------------------------
+ * | Audio Mode     | 18..19 | 0 none
+ * | indication     |        | 1 requires audio mode updates
+ * |                |        | 2..3 reserved
+ * +----------------+--------+--------------------------------------------------
+ * | Audio source   | 20..21 | 0 none
+ * | indication     |        | 1 requires audio source updates
+ * |                |        | 2..3 reserved
+ * +----------------+--------+--------------------------------------------------
+ * | Effect offload | 22     | 0 The effect cannot be offloaded to an audio DSP
+ * | supported      |        | 1 The effect can be offloaded to an audio DSP
+ * +----------------+--------+--------------------------------------------------
+ * | Process        | 23     | 0 The effect implements a process function.
+ * | function       |        | 1 The effect does not implement a process
+ * | not            |        |   function: enabling the effect has no impact
+ * | implemented    |        |   on latency or CPU load.
+ * |                |        |   Effect implementations setting this flag do not
+ * |                |        |   have to implement a process function.
+ * +----------------+--------+--------------------------------------------------
+ */
+@export(name="", value_prefix="EFFECT_FLAG_")
+enum EffectFlags {
+    // Insert mode
+    TYPE_SHIFT = 0,
+    TYPE_SIZE = 3,
+    TYPE_MASK = ((1 << TYPE_SIZE) -1) << TYPE_SHIFT,
+    TYPE_INSERT = 0 << TYPE_SHIFT,
+    TYPE_AUXILIARY = 1 << TYPE_SHIFT,
+    TYPE_REPLACE = 2 << TYPE_SHIFT,
+    TYPE_PRE_PROC = 3 << TYPE_SHIFT,
+    TYPE_POST_PROC = 4 << TYPE_SHIFT,
+
+    // Insert preference
+    INSERT_SHIFT = TYPE_SHIFT + TYPE_SIZE,
+    INSERT_SIZE = 3,
+    INSERT_MASK = ((1 << INSERT_SIZE) -1) << INSERT_SHIFT,
+    INSERT_ANY = 0 << INSERT_SHIFT,
+    INSERT_FIRST = 1 << INSERT_SHIFT,
+    INSERT_LAST = 2 << INSERT_SHIFT,
+    INSERT_EXCLUSIVE = 3 << INSERT_SHIFT,
+
+    // Volume control
+    VOLUME_SHIFT = INSERT_SHIFT + INSERT_SIZE,
+    VOLUME_SIZE = 3,
+    VOLUME_MASK = ((1 << VOLUME_SIZE) -1) << VOLUME_SHIFT,
+    VOLUME_CTRL = 1 << VOLUME_SHIFT,
+    VOLUME_IND = 2 << VOLUME_SHIFT,
+    VOLUME_NONE = 0 << VOLUME_SHIFT,
+
+    // Device indication
+    DEVICE_SHIFT = VOLUME_SHIFT + VOLUME_SIZE,
+    DEVICE_SIZE = 3,
+    DEVICE_MASK = ((1 << DEVICE_SIZE) -1) << DEVICE_SHIFT,
+    DEVICE_IND = 1 << DEVICE_SHIFT,
+    DEVICE_NONE = 0 << DEVICE_SHIFT,
+
+    // Sample input modes
+    INPUT_SHIFT = DEVICE_SHIFT + DEVICE_SIZE,
+    INPUT_SIZE = 2,
+    INPUT_MASK = ((1 << INPUT_SIZE) -1) << INPUT_SHIFT,
+    INPUT_DIRECT = 1 << INPUT_SHIFT,
+    INPUT_PROVIDER = 2 << INPUT_SHIFT,
+    INPUT_BOTH = 3 << INPUT_SHIFT,
+
+    // Sample output modes
+    OUTPUT_SHIFT = INPUT_SHIFT + INPUT_SIZE,
+    OUTPUT_SIZE = 2,
+    OUTPUT_MASK = ((1 << OUTPUT_SIZE) -1) << OUTPUT_SHIFT,
+    OUTPUT_DIRECT = 1 << OUTPUT_SHIFT,
+    OUTPUT_PROVIDER = 2 << OUTPUT_SHIFT,
+    OUTPUT_BOTH = 3 << OUTPUT_SHIFT,
+
+    // Hardware acceleration mode
+    HW_ACC_SHIFT = OUTPUT_SHIFT + OUTPUT_SIZE,
+    HW_ACC_SIZE = 2,
+    HW_ACC_MASK = ((1 << HW_ACC_SIZE) -1) << HW_ACC_SHIFT,
+    HW_ACC_SIMPLE = 1 << HW_ACC_SHIFT,
+    HW_ACC_TUNNEL = 2 << HW_ACC_SHIFT,
+
+    // Audio mode indication
+    AUDIO_MODE_SHIFT = HW_ACC_SHIFT + HW_ACC_SIZE,
+    AUDIO_MODE_SIZE = 2,
+    AUDIO_MODE_MASK = ((1 << AUDIO_MODE_SIZE) -1) << AUDIO_MODE_SHIFT,
+    AUDIO_MODE_IND = 1 << AUDIO_MODE_SHIFT,
+    AUDIO_MODE_NONE = 0 << AUDIO_MODE_SHIFT,
+
+    // Audio source indication
+    AUDIO_SOURCE_SHIFT = AUDIO_MODE_SHIFT + AUDIO_MODE_SIZE,
+    AUDIO_SOURCE_SIZE = 2,
+    AUDIO_SOURCE_MASK = ((1 << AUDIO_SOURCE_SIZE) -1) << AUDIO_SOURCE_SHIFT,
+    AUDIO_SOURCE_IND = 1 << AUDIO_SOURCE_SHIFT,
+    AUDIO_SOURCE_NONE = 0 << AUDIO_SOURCE_SHIFT,
+
+    // Effect offload indication
+    OFFLOAD_SHIFT = AUDIO_SOURCE_SHIFT + AUDIO_SOURCE_SIZE,
+    OFFLOAD_SIZE = 1,
+    OFFLOAD_MASK = ((1 << OFFLOAD_SIZE) -1) << OFFLOAD_SHIFT,
+    OFFLOAD_SUPPORTED = 1 << OFFLOAD_SHIFT,
+
+    // Effect has no process indication
+    NO_PROCESS_SHIFT = OFFLOAD_SHIFT + OFFLOAD_SIZE,
+    NO_PROCESS_SIZE = 1,
+    NO_PROCESS_MASK = ((1 << NO_PROCESS_SIZE) -1) << NO_PROCESS_SHIFT,
+    NO_PROCESS = 1 << NO_PROCESS_SHIFT
+};
+
+/*
+ * The effect descriptor contains necessary information to facilitate the
+ * enumeration of the effect engines present in a library.
+ */
+struct EffectDescriptor {
+    Uuid type;             // UUID of to the OpenSL ES interface implemented
+                           // by this effect
+    Uuid uuid;             // UUID for this particular implementation
+    EffectFlags flags;     // effect engine capabilities/requirements flags
+    uint16_t cpuLoad;      // CPU load indication expressed in 0.1 MIPS units
+                           // as estimated on an ARM9E core (ARMv5TE) with 0 WS
+    uint16_t memoryUsage;  // data memory usage expressed in KB and includes
+                           // only dynamically allocated memory
+    string name;           // human readable effect name
+    string implementor;    // human readable effect implementor name
+};
+
+/*
+ * A buffer is a chunk of audio data for processing.  Multi-channel audio is
+ * always interleaved. The channel order is from LSB to MSB with regard to the
+ * channel mask definition in audio.h, audio_channel_mask_t, e.g.:
+ * Stereo: L, R; 5.1: FL, FR, FC, LFE, BL, BR.
+ *
+ * The buffer size is expressed in frame count, a frame being composed of
+ * samples for all channels at a given time. Frame size for unspecified format
+ * (AUDIO_FORMAT_OTHER) is 8 bit by definition.
+ */
+// TODO(mnaganov): replace with FMQ version.
+struct AudioBuffer {
+    uint32_t frameCount;
+    vec<uint8_t> data;
+};
+
+@export(name="effect_buffer_access_e", value_prefix="EFFECT_BUFFER_")
+enum EffectBufferAccess {
+    ACCESS_WRITE,
+    ACCESS_READ,
+    ACCESS_ACCUMULATE
+};
+
+/*
+ * Determines what fields of EffectBufferConfig need to be considered.
+ */
+@export(name="", value_prefix="EFFECT_CONFIG_")
+enum EffectConfigParameters {
+    BUFFER = 0x0001,    // buffer field
+    SMP_RATE = 0x0002,  // samplingRate
+    CHANNELS = 0x0004,  // channels
+    FORMAT = 0x0008,    // format
+    ACC_MODE = 0x0010,  // accessMode
+    ALL = BUFFER | SMP_RATE | CHANNELS | FORMAT | ACC_MODE
+};
+
+/*
+ * The buffer config structure specifies the input or output audio format
+ * to be used by the effect engine.
+ */
+struct EffectBufferConfig {
+    AudioBuffer buffer;
+    uint32_t samplingRateHz;
+    AudioChannelMask channels;
+    AudioFormat format;
+    EffectBufferAccess accessMode;
+    EffectConfigParameters mask;
+};
+
+struct EffectConfig {
+    EffectBufferConfig inputCfg;
+    EffectBufferConfig outputCfg;
+};
+
+@export(name="effect_feature_e", value_prefix="EFFECT_FEATURE_")
+enum EffectFeature {
+    AUX_CHANNELS, // supports auxiliary channels
+                  // (e.g. dual mic noise suppressor)
+    CNT
+};
+
+struct EffectFeatureConfig {
+    EffectFeature feature;
+    EffectConfig config;
+};
+
+struct EffectOffloadParameter {
+    bool isOffload;          // true if the playback thread the effect
+                             // is attached to is offloaded
+    AudioIoHandle ioHandle;  // io handle of the playback thread
+                             // the effect is attached to
+};
diff --git a/biometrics/fingerprint/2.1/Android.bp b/biometrics/fingerprint/2.1/Android.bp
new file mode 100644
index 0000000..77b41b8
--- /dev/null
+++ b/biometrics/fingerprint/2.1/Android.bp
@@ -0,0 +1,54 @@
+// This file is autogenerated by hidl-gen. Do not edit manually.
+
+genrule {
+    name: "android.hardware.biometrics.fingerprint@2.1_genc++",
+    tool: "hidl-gen",
+    cmd: "$tool -o $genDir -Lc++ -randroid.hardware:hardware/interfaces android.hardware.biometrics.fingerprint@2.1",
+    srcs: [
+        "types.hal",
+        "IBiometricsFingerprint.hal",
+        "IBiometricsFingerprintClientCallback.hal",
+    ],
+    out: [
+        "android/hardware/biometrics/fingerprint/2.1/types.cpp",
+        "android/hardware/biometrics/fingerprint/2.1/BiometricsFingerprintAll.cpp",
+        "android/hardware/biometrics/fingerprint/2.1/BiometricsFingerprintClientCallbackAll.cpp",
+    ],
+}
+
+genrule {
+    name: "android.hardware.biometrics.fingerprint@2.1_genc++_headers",
+    tool: "hidl-gen",
+    cmd: "$tool -o $genDir -Lc++ -randroid.hardware:hardware/interfaces android.hardware.biometrics.fingerprint@2.1",
+    srcs: [
+        "types.hal",
+        "IBiometricsFingerprint.hal",
+        "IBiometricsFingerprintClientCallback.hal",
+    ],
+    out: [
+        "android/hardware/biometrics/fingerprint/2.1/types.h",
+        "android/hardware/biometrics/fingerprint/2.1/IBiometricsFingerprint.h",
+        "android/hardware/biometrics/fingerprint/2.1/IHwBiometricsFingerprint.h",
+        "android/hardware/biometrics/fingerprint/2.1/BnBiometricsFingerprint.h",
+        "android/hardware/biometrics/fingerprint/2.1/BpBiometricsFingerprint.h",
+        "android/hardware/biometrics/fingerprint/2.1/BsBiometricsFingerprint.h",
+        "android/hardware/biometrics/fingerprint/2.1/IBiometricsFingerprintClientCallback.h",
+        "android/hardware/biometrics/fingerprint/2.1/IHwBiometricsFingerprintClientCallback.h",
+        "android/hardware/biometrics/fingerprint/2.1/BnBiometricsFingerprintClientCallback.h",
+        "android/hardware/biometrics/fingerprint/2.1/BpBiometricsFingerprintClientCallback.h",
+        "android/hardware/biometrics/fingerprint/2.1/BsBiometricsFingerprintClientCallback.h",
+    ],
+}
+
+cc_library_shared {
+    name: "android.hardware.biometrics.fingerprint@2.1",
+    generated_sources: ["android.hardware.biometrics.fingerprint@2.1_genc++"],
+    generated_headers: ["android.hardware.biometrics.fingerprint@2.1_genc++_headers"],
+    export_generated_headers: ["android.hardware.biometrics.fingerprint@2.1_genc++_headers"],
+    shared_libs: [
+        "libhidl",
+        "libhwbinder",
+        "libutils",
+        "libcutils",
+    ],
+}
diff --git a/biometrics/fingerprint/2.1/IBiometricsFingerprint.hal b/biometrics/fingerprint/2.1/IBiometricsFingerprint.hal
new file mode 100644
index 0000000..a9c3190
--- /dev/null
+++ b/biometrics/fingerprint/2.1/IBiometricsFingerprint.hal
@@ -0,0 +1,157 @@
+/*
+ * Copyright (C) 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.biometrics.fingerprint@2.1;
+
+interface IBiometricsFingerprint {
+  /*
+   * Fingerprint pre-enroll enroll request:
+   * Generates a unique token to upper layers to indicate the start of
+   * an enrollment transaction. pre-enroll and post-enroll specify
+   * a pin/password cleared time window where enrollment is allowed.
+   * Pre-enroll only generates a challenge, a full hardwareAuthToken is
+   * generated by trustzone after verifying a pin/password/swipe. This is to
+   * ensure adding a new fingerprint template was preceded by some kind of
+   * credential confirmation (e.g. device password).
+   *
+   * @return 0 if function failed, a uint64_t of challenge otherwise.
+   */
+  @callflow(next={"enroll", "postEnroll"})
+  preEnroll() generates (uint64_t authChallenge);
+
+  /*
+   * Fingerprint enroll request:
+   * Switches the HAL state machine to collect and store a new fingerprint
+   * template. Switches back as soon as enroll is complete, signalled by
+   * (fingerprintMsg.type == FINGERPRINT_TEMPLATE_ENROLLING &&
+   *  fingerprintMsg.data.enroll.samplesRemaining == 0)
+   * or after timeoutSec seconds.
+   * The fingerprint template must be assigned to the group gid.
+   *
+   * @param hat a valid Hardware Authentication Token (HAT), generated
+   * as a result of a preEnroll() call.
+   * @param gid a framework defined fingerprint set (group) id.
+   * @param timeoutSec a timeout in seconds.
+   *
+   * @return isOk indicates if the request is accepted.
+   * @return debugErrno is a value the framework logs in case isOk == false.
+   *
+   * A notify() function may be called with a more detailed error structure.
+   */
+  @callflow(next={"cancel", "enroll", "postEnroll", "remove"})
+  enroll(HwAuthToken hat, uint32_t gid, uint32_t timeoutSec)
+      generates (bool isOk, int32_t debugErrno);
+
+  /*
+   * Finishes the enroll operation and invalidates the preEnroll() generated
+   * challenge. This must be called at the end of a multi-finger enrollment
+   * session to indicate that no more fingers may be added.
+   *
+   * @return isOk indicates if the request is accepted.
+   * @return debugErrno is a value the framework logs in case isOk == false.
+   */
+  @callflow(next={"authenticate", "setActiveGroup", "enumerate", "remove"})
+  postEnroll() generates (bool isOk, int32_t debugErrno);
+
+  /*
+   * getAuthenticatorId:
+   * Returns a token associated with the current fingerprint set. This value
+   * must change whenever a new fingerprint is enrolled, thus creating a new
+   * fingerprint set.
+   *
+   * @return getAuthenticatorIdRet current authenticator id, 0 if function
+   * failed.
+   */
+  @callflow(next={"authenticate"})
+  getAuthenticatorId() generates (uint64_t AuthenticatorId);
+
+  /*
+   * Cancel pending enroll or authenticate, sending FINGERPRINT_ERROR_CANCELED
+   * to all running clients. Switches the HAL state machine back to the idle
+   * state. Unlike enrollDone() doesn't invalidate the preEnroll() challenge.
+   *
+   * @return isOk indicates if the request is accepted.
+   * @return debugErrno is a value the framework logs in case isOk == false.
+   */
+  @callflow(next={"authenticate", "enroll", "enumerate", "remove",
+    "setActiveGroup"})
+  cancel() generates (bool isOk, int32_t debugErrno);
+
+  /*
+   * Enumerate all the fingerprint templates found in the directory set by
+   * setActiveGroup():
+   * For each template found a notify() must be called with:
+   * fingerprintMsg.type == FINGERPRINT_TEMPLATE_ENUMERATED
+   * fingerprintMsg.data.enumerated.finger indicating a template id
+   * fingerprintMsg.data.enumerated.remainingTemplates indicating how many more
+   * enumeration messages to expect.
+   *
+   * @return isOk indicates if the request is accepted.
+   * @return debugErrno is a value the framework logs in case isOk == false.
+   */
+  @callflow(next={"remove", "enroll", "authenticate", "setActiveGroup"})
+  enumerate() generates (bool isOk, int32_t debugErrno);
+
+  /*
+   * Fingerprint remove request:
+   * Deletes fingerprint template(s).
+   * Works only within the path set by setActiveGroup().
+   * For each template found a notify() must be called with:
+   * fingerprintMsg.type == FINGERPRINT_TEMPLATE_REMOVED
+   * fingerprintMsg.data.removed.finger indicating the template id deleted
+   * fingerprintMsg.data.removed.remainingTemplates indicating how many more
+   * templates must be deleted by this operation.
+   *
+   * @param gid group id must match the last group set by setActiveGroup().
+   * @param fid template id to delete or 0 to delete all templates within the
+   * current group.
+   *
+   * @return isOk indicates if the request is accepted.
+   * @return debugErrno is a value the framework logs in case isOk == false.
+   */
+  @callflow(next={"enumerate", "authenticate", "cancel", "getAuthenticatorId",
+    "setActiveGroup"})
+  remove(uint32_t gid, uint32_t fid) generates (bool isOk, int32_t debugErrno);
+
+  /*
+   * Restricts the HAL operation to a set of fingerprints belonging to a group
+   * provided. The caller must provide a path to a storage location within the
+   * user's data directory.
+   *
+   * @param gid the fingerprint group (set) id.
+   * @param storePath filesystem path to the template storage directory.
+   *
+   * @return isOk indicates if the request is accepted.
+   * @return debugErrno is a value the framework logs in case isOk == false.
+   */
+  @callflow(next={"authenticate", "preEnroll", "enumerate", "remove"})
+  @entry
+  setActiveGroup(uint32_t gid, string storePath)
+      generates (bool isOk, int32_t debugErrno);
+
+  /*
+   * Authenticates an operation identifed by operationId
+   *
+   * @param operationId operation id.
+   * @param gid fingerprint group id.
+   *
+   * @return isOk indicates if the request is accepted.
+   * @return debugErrno is a value the framework logs in case isOk == false.
+   */
+  @callflow(next={"cancel", "preEnroll", "remove"})
+  authenticate(uint64_t operationId, uint32_t gid)
+      generates (bool isOk, int32_t debugErrno);
+};
diff --git a/biometrics/fingerprint/2.1/IBiometricsFingerprintClientCallback.hal b/biometrics/fingerprint/2.1/IBiometricsFingerprintClientCallback.hal
new file mode 100644
index 0000000..365e905
--- /dev/null
+++ b/biometrics/fingerprint/2.1/IBiometricsFingerprintClientCallback.hal
@@ -0,0 +1,27 @@
+/*
+ * Copyright (C) 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.biometrics.fingerprint@2.1;
+
+interface IBiometricsFingerprintClientCallback {
+    /* This function is the response chanel for all messages
+     * coming from the fingerprint HAL to the framework
+     *
+     * @param msg a union of message structures identified by
+     * FingerprintMsg.type
+     */
+    oneway notify(FingerprintMsg msg);
+};
diff --git a/biometrics/fingerprint/2.1/types.hal b/biometrics/fingerprint/2.1/types.hal
new file mode 100644
index 0000000..cf68c04
--- /dev/null
+++ b/biometrics/fingerprint/2.1/types.hal
@@ -0,0 +1,148 @@
+/*
+ * Copyright (C) 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.biometrics.fingerprint@2.1;
+
+/*
+ * Fingerprint errors are meant to tell the framework to terminate the current
+ * operation and ask for the user to correct the situation. These will almost
+ * always result in messaging and user interaction to correct the problem.
+ *
+ * For example, ERROR_CANCELED should follow any acquisition message that
+ * results in a situation where the current operation can't continue without
+ * user interaction. For example, if the sensor is dirty during enrollment and
+ * no further enrollment progress can be made, send ACQUIRED_IMAGER_DIRTY
+ * followed by ERROR_CANCELED.
+ */
+enum FingerprintError : int32_t {
+  /* The hardware has an error that can't be resolved. */
+  ERROR_HW_UNAVAILABLE = 1,
+  /* Bad data; operation can't continue */
+  ERROR_UNABLE_TO_PROCESS = 2,
+  /* The operation has timed out waiting for user input. */
+  ERROR_TIMEOUT = 3,
+  /* No space available to store a template */
+  ERROR_NO_SPACE = 4,
+  /* The current operation has been canceled */
+  ERROR_CANCELED = 5,
+  /* Unable to remove a template */
+  ERROR_UNABLE_TO_REMOVE = 6,
+};
+
+/*
+ * Fingerprint acquisition info is meant as feedback for the current operation.
+ * Anything but ACQUIRED_GOOD must be shown to the user as feedback on how to
+ * take action on the current operation. For example, ACQUIRED_IMAGER_DIRTY may
+ * be used to tell the user to clean the sensor if it is detected to be dirty.
+ * If this causes the current operation to fail, an additional ERROR_CANCELED
+ * must be sent to stop the operation in progress (e.g. enrollment).
+ * In general, these messages will result in a "Try again" message.
+ */
+enum FingerprintAcquiredInfo : int32_t {
+  ACQUIRED_GOOD = 0,
+  /* sensor needs more data, i.e. longer swipe. */
+  ACQUIRED_PARTIAL = 1,
+  /* image doesn't contain enough detail for recognition*/
+  ACQUIRED_INSUFFICIENT = 2,
+  /* sensor needs to be cleaned */
+  ACQUIRED_IMAGER_DIRTY = 3,
+  /* mostly swipe-type sensors; not enough data collected */
+  ACQUIRED_TOO_SLOW = 4,
+  /* vendor-specific acquisition messages start here */
+  ACQUIRED_TOO_FAST = 5,
+  ACQUIRED_VENDOR_BASE = 1000,
+};
+
+/* TODO import from keymaster HIDL when available */
+enum HwAuthenticatorType : uint32_t {
+  HW_AUTH_NONE = 0,
+  HW_AUTH_PASSWORD = 1,
+  HW_AUTH_FINGERPRINT = 2,
+  HW_AUTH_ANY = 0xffffffff,
+};
+
+/* TODO import from keymaster HIDL when available */
+struct HwAuthToken {
+  uint8_t version;
+  uint64_t challenge;
+  uint64_t userId;
+  uint64_t authenticatorId;
+  uint32_t authenticatorType;
+  uint64_t timestamp;
+  uint8_t[32] hmac;
+};
+
+struct FingerprintFingerId {
+  /* Group ID */
+  uint32_t gid;
+  /* Fingerprint template ID */
+  uint32_t fid;
+};
+
+struct FingerprintEnroll {
+  /* Template ID */
+  FingerprintFingerId finger;
+  /* samplesRemaining goes from N (no data collected, but N scans needed)
+   * to 0 (no more data is needed to build a template). */
+  uint32_t samplesRemaining;
+  /* Vendor specific message. Used for user guidance */
+  uint64_t msg;
+};
+
+struct FingerprintIterator {
+  /* Template ID */
+  FingerprintFingerId finger;
+  /* How many templates remain to iterate through */
+  uint32_t remainingTemplates;
+};
+
+typedef FingerprintIterator FingerprintEnumerated;
+typedef FingerprintIterator FingerprintRemoved;
+
+struct FingerprintAcquired {
+  /* information about the image */
+  FingerprintAcquiredInfo acquiredInfo;
+};
+
+struct FingerprintAuthenticated {
+  /* Matched template ID */
+  FingerprintFingerId finger;
+  /* Authentication result from the keymaster */
+  HwAuthToken hat;
+};
+
+/* Run time type identification for the notify() call payload. */
+enum FingerprintMsgType : int32_t {
+  ERROR = -1,
+  ACQUIRED = 1,
+  TEMPLATE_ENROLLING = 3,
+  TEMPLATE_REMOVED = 4,
+  AUTHENTICATED = 5,
+  TEMPLATE_ENUMERATING = 6,
+};
+
+struct FingerprintMsg {
+  /* Selects the payload below */
+  FingerprintMsgType type;
+  union data {
+    FingerprintError error;
+    FingerprintEnroll enroll;
+    FingerprintEnumerated enumerated;
+    FingerprintRemoved removed;
+    FingerprintAcquired acquired;
+    FingerprintAuthenticated authenticated;
+  };
+};
diff --git a/graphics/allocator/2.0/Android.bp b/graphics/allocator/2.0/Android.bp
new file mode 100644
index 0000000..f29c50b
--- /dev/null
+++ b/graphics/allocator/2.0/Android.bp
@@ -0,0 +1,46 @@
+// This file is autogenerated by hidl-gen. Do not edit manually.
+
+genrule {
+    name: "android.hardware.graphics.allocator@2.0_genc++",
+    tool: "hidl-gen",
+    cmd: "$tool -o $genDir -Lc++ -randroid.hardware:hardware/interfaces android.hardware.graphics.allocator@2.0",
+    srcs: [
+        "types.hal",
+        "IAllocator.hal",
+    ],
+    out: [
+        "android/hardware/graphics/allocator/2.0/types.cpp",
+        "android/hardware/graphics/allocator/2.0/AllocatorAll.cpp",
+    ],
+}
+
+genrule {
+    name: "android.hardware.graphics.allocator@2.0_genc++_headers",
+    tool: "hidl-gen",
+    cmd: "$tool -o $genDir -Lc++ -randroid.hardware:hardware/interfaces android.hardware.graphics.allocator@2.0",
+    srcs: [
+        "types.hal",
+        "IAllocator.hal",
+    ],
+    out: [
+        "android/hardware/graphics/allocator/2.0/types.h",
+        "android/hardware/graphics/allocator/2.0/IAllocator.h",
+        "android/hardware/graphics/allocator/2.0/IHwAllocator.h",
+        "android/hardware/graphics/allocator/2.0/BnAllocator.h",
+        "android/hardware/graphics/allocator/2.0/BpAllocator.h",
+        "android/hardware/graphics/allocator/2.0/BsAllocator.h",
+    ],
+}
+
+cc_library_shared {
+    name: "android.hardware.graphics.allocator@2.0",
+    generated_sources: ["android.hardware.graphics.allocator@2.0_genc++"],
+    generated_headers: ["android.hardware.graphics.allocator@2.0_genc++_headers"],
+    export_generated_headers: ["android.hardware.graphics.allocator@2.0_genc++_headers"],
+    shared_libs: [
+        "libhidl",
+        "libhwbinder",
+        "libutils",
+        "libcutils",
+    ],
+}
diff --git a/graphics/allocator/2.0/IAllocator.hal b/graphics/allocator/2.0/IAllocator.hal
new file mode 100644
index 0000000..8accb82
--- /dev/null
+++ b/graphics/allocator/2.0/IAllocator.hal
@@ -0,0 +1,177 @@
+/*
+ * Copyright (C) 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.graphics.allocator@2.0;
+
+interface IAllocator {
+    enum Capability : int32_t {
+        /* reserved */
+        INVALID = 0,
+
+        /*
+         * testAllocate will always return UNDEFINED unless this capability
+         * is supported.
+         */
+        TEST_ALLOCATE = 1,
+    };
+
+    struct BufferDescriptorInfo {
+        /*
+         * The width specifies how many columns of pixels should be in the
+         * allocated buffer, but does not necessarily represent the offset in
+         * columns between the same column in adjacent rows. The rows may be
+         * padded.
+         */
+        uint32_t width;
+
+       /*
+        * The height specifies how many rows of pixels should be in the
+        * allocated buffer.
+        */
+        uint32_t height;
+
+        /* Buffer pixel format. */
+        PixelFormat format;
+
+        /*
+         * Buffer producer usage mask; valid flags can be found in the
+         * definition of ProducerUsage.
+         */
+        uint64_t producerUsageMask;
+
+        /*
+         * Buffer consumer usage mask; valid flags can be found in the
+         * definition of ConsumerUsage.
+         */
+        uint64_t consumerUsageMask;
+    };
+
+    /*
+     * Provides a list of supported capabilities (as described in the
+     * definition of Capability above). This list must not change after
+     * initialization.
+     *
+     * @return capabilities is a list of supported capabilities.
+     */
+    getCapabilities() generates (vec<Capability> capabilities);
+
+    /*
+     * Retrieves implementation-defined debug information, which will be
+     * displayed during, for example, `dumpsys SurfaceFlinger`.
+     *
+     * @return debugInfo is a string of debug information.
+     */
+    dumpDebugInfo() generates (string debugInfo);
+
+    /*
+     * Creates a new, opaque buffer descriptor.
+     *
+     * @param descriptorInfo specifies the attributes of the buffer
+     *        descriptor.
+     * @return error is NONE upon success. Otherwise,
+     *         BAD_VALUE when any attribute in descriptorInfo is invalid.
+     *         NO_RESOURCES when no more descriptors can currently be created.
+     * @return descriptor is the newly created buffer descriptor.
+     */
+    createDescriptor(BufferDescriptorInfo descriptorInfo)
+          generates (Error error,
+                     BufferDescriptor descriptor);
+
+    /*
+     * Destroys an existing buffer descriptor.
+     *
+     * @param descriptor is the descriptor to destroy.
+     * @return error is either NONE or BAD_DESCRIPTOR.
+     */
+    destroyDescriptor(BufferDescriptor descriptor) generates (Error error);
+
+    /*
+     * Tests whether a buffer allocation can succeed, ignoring potential
+     * resource contention which might lead to a NO_RESOURCES error.
+     *
+     * @param descriptors is a list of buffer descriptors.
+     * @return error is NONE or NOT_SHARED upon success;
+     *         NONE when buffers can be created and share a backing store.
+     *         NOT_SHARED when buffers can be created but require more than a
+     *                    backing store.
+     *         Otherwise,
+     *         BAD_DESCRIPTOR when any of the descriptors is invalid.
+     *         UNSUPPORTED when any of the descriptors can never be satisfied.
+     *         UNDEFINED when TEST_ALLOCATE is not listed in getCapabilities.
+     */
+    testAllocate(vec<BufferDescriptor> descriptors) generates (Error error);
+
+    /*
+     * Attempts to allocate a list of buffers sharing a backing store.
+     *
+     * Each buffer will correspond to one of the descriptors passed into the
+     * function and will hold a reference to its backing store. If the device
+     * is unable to share the backing store between the buffers, it must
+     * attempt to allocate the buffers with different backing stores and
+     * return NOT_SHARED if it is successful.
+     *
+     * @param descriptors is the buffer descriptors to attempt to allocate.
+     * @return error is NONE or NOT_SHARED upon success;
+     *         NONE when buffers can be created and share a backing store.
+     *         NOT_SHARED when buffers can be created but require more than a
+     *                    backing store.
+     *         Otherwise,
+     *         BAD_DESCRIPTOR when any of the descriptors is invalid.
+     *         UNSUPPORTED when any of the descriptors can never be satisfied.
+     *         NO_RESOURCES when any of the buffers cannot be created at this
+     *                      time.
+     * @return buffers is the allocated buffers.
+     */
+    allocate(vec<BufferDescriptor> descriptors)
+        generates (Error error,
+                   vec<Buffer> buffers);
+
+    /*
+     * Frees a buffer.
+     *
+     * @param buffer is the buffer to be freed.
+     * @return error is NONE upon success. Otherwise,
+     *         BAD_BUFFER when the buffer is invalid.
+     */
+    free(Buffer buffer) generates (Error error);
+
+    /*
+     * Exports a buffer for use in other client libraries or for cross-process
+     * sharing.
+     *
+     * The exported handle is a handle to the backing store of the buffer, not
+     * to the buffer itself. It however may not hold any reference to the
+     * backing store and may be considered invalid by client libraries. To use
+     * it and, in most cases, to save it for later use, a client must make a
+     * clone of the handle and have the cloned handle hold a reference to the
+     * backing store. Such a cloned handle will stay valid even after the
+     * original buffer is freed. Refer to native_handle_clone and IMapper for
+     * how a handle is cloned and how a reference is added.
+     *
+     * @param descriptor is the descriptor used to allocate the buffer.
+     * @param buffer is the buffer to be exported.
+     * @return error is NONE upon success. Otherwise,
+     *         BAD_DESCRIPTOR when the descriptor is invalid.
+     *         BAD_BUFFER when the buffer is invalid.
+     *         BAD_VALUE when descriptor and buffer do not match.
+     *         NO_RESOURCES when the buffer cannot be exported at this time.
+     * @return bufferHandle is the exported handle.
+     */
+    exportHandle(BufferDescriptor descriptor,
+                 Buffer buffer)
+      generates (Error error,
+                 handle bufferHandle);
+};
diff --git a/graphics/allocator/2.0/default/Android.bp b/graphics/allocator/2.0/default/Android.bp
new file mode 100644
index 0000000..9a24773
--- /dev/null
+++ b/graphics/allocator/2.0/default/Android.bp
@@ -0,0 +1,24 @@
+cc_library_shared {
+    name: "android.hardware.graphics.allocator@2.0-impl",
+    relative_install_path: "hw",
+    srcs: ["Gralloc.cpp"],
+    cppflags: ["-Wall", "-Wextra"],
+    shared_libs: [
+        "android.hardware.graphics.allocator@2.0",
+        "libbase",
+        "libcutils",
+        "libhardware",
+        "libhidl",
+        "libhwbinder",
+        "liblog",
+        "libutils",
+    ],
+}
+
+cc_library_static {
+    name: "libgralloc1-adapter",
+    srcs: ["gralloc1-adapter.c"],
+    include_dirs: ["system/core/libsync/include"],
+    cflags: ["-Wall", "-Wextra", "-Wno-unused-parameter"],
+    export_include_dirs: ["."],
+}
diff --git a/graphics/allocator/2.0/default/Gralloc.cpp b/graphics/allocator/2.0/default/Gralloc.cpp
new file mode 100644
index 0000000..a7fc6c1
--- /dev/null
+++ b/graphics/allocator/2.0/default/Gralloc.cpp
@@ -0,0 +1,297 @@
+/*
+ * Copyright 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#define LOG_TAG "GrallocPassthrough"
+
+#include <type_traits>
+#include <unordered_set>
+#include <vector>
+
+#include <string.h>
+
+#include <hardware/gralloc1.h>
+#include <log/log.h>
+
+#include "Gralloc.h"
+
+namespace android {
+namespace hardware {
+namespace graphics {
+namespace allocator {
+namespace V2_0 {
+namespace implementation {
+
+class GrallocHal : public IAllocator {
+public:
+    GrallocHal(const hw_module_t* module);
+    virtual ~GrallocHal();
+
+    // IAllocator interface
+    Return<void> getCapabilities(getCapabilities_cb hidl_cb) override;
+    Return<void> dumpDebugInfo(dumpDebugInfo_cb hidl_cb) override;
+    Return<void> createDescriptor(const BufferDescriptorInfo& descriptorInfo,
+            createDescriptor_cb hidl_cb) override;
+    Return<Error> destroyDescriptor(BufferDescriptor descriptor) override;
+
+    Return<Error> testAllocate(
+            const hidl_vec<BufferDescriptor>& descriptors) override;
+    Return<void> allocate(const hidl_vec<BufferDescriptor>& descriptors,
+            allocate_cb hidl_cb) override;
+    Return<Error> free(Buffer buffer) override;
+
+    Return<void> exportHandle(BufferDescriptor descriptor,
+            Buffer buffer, exportHandle_cb hidl_cb) override;
+
+private:
+    void initCapabilities();
+
+    template<typename T>
+    void initDispatch(T& func, gralloc1_function_descriptor_t desc);
+    void initDispatch();
+
+    bool hasCapability(Capability capability) const;
+
+    gralloc1_device_t* mDevice;
+
+    std::unordered_set<Capability> mCapabilities;
+
+    struct {
+        GRALLOC1_PFN_DUMP dump;
+        GRALLOC1_PFN_CREATE_DESCRIPTOR createDescriptor;
+        GRALLOC1_PFN_DESTROY_DESCRIPTOR destroyDescriptor;
+        GRALLOC1_PFN_SET_DIMENSIONS setDimensions;
+        GRALLOC1_PFN_SET_FORMAT setFormat;
+        GRALLOC1_PFN_SET_CONSUMER_USAGE setConsumerUsage;
+        GRALLOC1_PFN_SET_PRODUCER_USAGE setProducerUsage;
+        GRALLOC1_PFN_ALLOCATE allocate;
+        GRALLOC1_PFN_RELEASE release;
+        GRALLOC1_PFN_GET_BACKING_STORE getBackingStore;
+        GRALLOC1_PFN_GET_STRIDE getStride;
+        GRALLOC1_PFN_GET_NUM_FLEX_PLANES getNumFlexPlanes;
+    } mDispatch;
+};
+
+GrallocHal::GrallocHal(const hw_module_t* module)
+    : mDevice(nullptr), mDispatch()
+{
+    int status = gralloc1_open(module, &mDevice);
+    if (status) {
+        LOG_ALWAYS_FATAL("failed to open gralloc1 device: %s",
+                strerror(-status));
+    }
+
+    initCapabilities();
+    initDispatch();
+}
+
+GrallocHal::~GrallocHal()
+{
+    gralloc1_close(mDevice);
+}
+
+void GrallocHal::initCapabilities()
+{
+    uint32_t count;
+    mDevice->getCapabilities(mDevice, &count, nullptr);
+
+    std::vector<Capability> caps(count);
+    mDevice->getCapabilities(mDevice, &count, reinterpret_cast<
+              std::underlying_type<Capability>::type*>(caps.data()));
+    caps.resize(count);
+
+    mCapabilities.insert(caps.cbegin(), caps.cend());
+}
+
+template<typename T>
+void GrallocHal::initDispatch(T& func, gralloc1_function_descriptor_t desc)
+{
+    auto pfn = mDevice->getFunction(mDevice, desc);
+    if (!pfn) {
+        LOG_ALWAYS_FATAL("failed to get gralloc1 function %d", desc);
+    }
+
+    func = reinterpret_cast<T>(pfn);
+}
+
+void GrallocHal::initDispatch()
+{
+    initDispatch(mDispatch.dump, GRALLOC1_FUNCTION_DUMP);
+    initDispatch(mDispatch.createDescriptor,
+            GRALLOC1_FUNCTION_CREATE_DESCRIPTOR);
+    initDispatch(mDispatch.destroyDescriptor,
+            GRALLOC1_FUNCTION_DESTROY_DESCRIPTOR);
+    initDispatch(mDispatch.setDimensions, GRALLOC1_FUNCTION_SET_DIMENSIONS);
+    initDispatch(mDispatch.setFormat, GRALLOC1_FUNCTION_SET_FORMAT);
+    initDispatch(mDispatch.setConsumerUsage,
+            GRALLOC1_FUNCTION_SET_CONSUMER_USAGE);
+    initDispatch(mDispatch.setProducerUsage,
+            GRALLOC1_FUNCTION_SET_PRODUCER_USAGE);
+    initDispatch(mDispatch.allocate, GRALLOC1_FUNCTION_ALLOCATE);
+    initDispatch(mDispatch.release, GRALLOC1_FUNCTION_RELEASE);
+}
+
+bool GrallocHal::hasCapability(Capability capability) const
+{
+    return (mCapabilities.count(capability) > 0);
+}
+
+Return<void> GrallocHal::getCapabilities(getCapabilities_cb hidl_cb)
+{
+    std::vector<Capability> caps(
+            mCapabilities.cbegin(), mCapabilities.cend());
+
+    hidl_vec<Capability> reply;
+    reply.setToExternal(caps.data(), caps.size());
+    hidl_cb(reply);
+
+    return Void();
+}
+
+Return<void> GrallocHal::dumpDebugInfo(dumpDebugInfo_cb hidl_cb)
+{
+    uint32_t len = 0;
+    mDispatch.dump(mDevice, &len, nullptr);
+
+    std::vector<char> buf(len + 1);
+    mDispatch.dump(mDevice, &len, buf.data());
+    buf.resize(len + 1);
+    buf[len] = '\0';
+
+    hidl_string reply;
+    reply.setToExternal(buf.data(), len);
+    hidl_cb(reply);
+
+    return Void();
+}
+
+Return<void> GrallocHal::createDescriptor(
+        const BufferDescriptorInfo& descriptorInfo,
+        createDescriptor_cb hidl_cb)
+{
+    BufferDescriptor descriptor;
+    int32_t err = mDispatch.createDescriptor(mDevice, &descriptor);
+    if (err == GRALLOC1_ERROR_NONE) {
+        err = mDispatch.setDimensions(mDevice, descriptor,
+                descriptorInfo.width, descriptorInfo.height);
+    }
+    if (err == GRALLOC1_ERROR_NONE) {
+        err = mDispatch.setFormat(mDevice, descriptor,
+                static_cast<int32_t>(descriptorInfo.format));
+    }
+    if (err == GRALLOC1_ERROR_NONE) {
+        uint64_t producerUsageMask = descriptorInfo.producerUsageMask;
+        if (producerUsageMask & GRALLOC1_PRODUCER_USAGE_CPU_READ_OFTEN) {
+            producerUsageMask |= GRALLOC1_PRODUCER_USAGE_CPU_READ;
+        }
+        if (producerUsageMask & GRALLOC1_PRODUCER_USAGE_CPU_WRITE_OFTEN) {
+            producerUsageMask |= GRALLOC1_PRODUCER_USAGE_CPU_WRITE;
+        }
+        err = mDispatch.setProducerUsage(mDevice, descriptor,
+                descriptorInfo.producerUsageMask);
+    }
+    if (err == GRALLOC1_ERROR_NONE) {
+        uint64_t consumerUsageMask = descriptorInfo.consumerUsageMask;
+        if (consumerUsageMask & GRALLOC1_CONSUMER_USAGE_CPU_READ_OFTEN) {
+            consumerUsageMask |= GRALLOC1_CONSUMER_USAGE_CPU_READ;
+        }
+        err = mDispatch.setConsumerUsage(mDevice, descriptor,
+                consumerUsageMask);
+    }
+
+    hidl_cb(static_cast<Error>(err), descriptor);
+
+    return Void();
+}
+
+Return<Error> GrallocHal::destroyDescriptor(
+        BufferDescriptor descriptor)
+{
+    int32_t err = mDispatch.destroyDescriptor(mDevice, descriptor);
+    return static_cast<Error>(err);
+}
+
+Return<Error> GrallocHal::testAllocate(
+        const hidl_vec<BufferDescriptor>& descriptors)
+{
+    if (!hasCapability(Capability::TEST_ALLOCATE)) {
+        return Error::UNDEFINED;
+    }
+
+    int32_t err = mDispatch.allocate(mDevice, descriptors.size(),
+            &descriptors[0], nullptr);
+    return static_cast<Error>(err);
+}
+
+Return<void> GrallocHal::allocate(
+        const hidl_vec<BufferDescriptor>& descriptors,
+        allocate_cb hidl_cb) {
+    std::vector<buffer_handle_t> buffers(descriptors.size());
+    int32_t err = mDispatch.allocate(mDevice, descriptors.size(),
+            &descriptors[0], buffers.data());
+    if (err != GRALLOC1_ERROR_NONE && err != GRALLOC1_ERROR_NOT_SHARED) {
+        buffers.clear();
+    }
+
+    hidl_vec<Buffer> reply;
+    reply.setToExternal(
+            reinterpret_cast<Buffer*>(buffers.data()),
+            buffers.size());
+    hidl_cb(static_cast<Error>(err), reply);
+
+    return Void();
+}
+
+Return<Error> GrallocHal::free(Buffer buffer)
+{
+    buffer_handle_t handle = reinterpret_cast<buffer_handle_t>(buffer);
+    int32_t err = mDispatch.release(mDevice, handle);
+    return static_cast<Error>(err);
+}
+
+Return<void> GrallocHal::exportHandle(BufferDescriptor /*descriptor*/,
+        Buffer buffer, exportHandle_cb hidl_cb)
+{
+    // do we want to validate?
+    buffer_handle_t handle = reinterpret_cast<buffer_handle_t>(buffer);
+
+    hidl_cb(Error::NONE, handle);
+
+    return Void();
+}
+
+IAllocator* HIDL_FETCH_IAllocator(const char* /* name */) {
+    const hw_module_t* module;
+    int err = hw_get_module(GRALLOC_HARDWARE_MODULE_ID, &module);
+    if (err) {
+        ALOGE("failed to get gralloc module");
+        return nullptr;
+    }
+
+    uint8_t major = (module->module_api_version >> 8) & 0xff;
+    if (major != 1) {
+        ALOGE("unknown gralloc module major version %d", major);
+        return nullptr;
+    }
+
+    return new GrallocHal(module);
+}
+
+} // namespace implementation
+} // namespace V2_0
+} // namespace allocator
+} // namespace graphics
+} // namespace hardware
+} // namespace android
diff --git a/graphics/allocator/2.0/default/Gralloc.h b/graphics/allocator/2.0/default/Gralloc.h
new file mode 100644
index 0000000..c79eeaa
--- /dev/null
+++ b/graphics/allocator/2.0/default/Gralloc.h
@@ -0,0 +1,38 @@
+/*
+ * Copyright 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef ANDROID_HARDWARE_GRAPHICS_ALLOCATOR_V2_0_GRALLOC_H
+#define ANDROID_HARDWARE_GRAPHICS_ALLOCATOR_V2_0_GRALLOC_H
+
+#include <android/hardware/graphics/allocator/2.0/IAllocator.h>
+
+namespace android {
+namespace hardware {
+namespace graphics {
+namespace allocator {
+namespace V2_0 {
+namespace implementation {
+
+extern "C" IAllocator* HIDL_FETCH_IAllocator(const char* name);
+
+} // namespace implementation
+} // namespace V2_0
+} // namespace allocator
+} // namespace graphics
+} // namespace hardware
+} // namespace android
+
+#endif // ANDROID_HARDWARE_GRAPHICS_ALLOCATOR_V2_0_GRALLOC_H
diff --git a/graphics/allocator/2.0/default/gralloc1-adapter.c b/graphics/allocator/2.0/default/gralloc1-adapter.c
new file mode 100644
index 0000000..724cd47
--- /dev/null
+++ b/graphics/allocator/2.0/default/gralloc1-adapter.c
@@ -0,0 +1,660 @@
+/*
+ * Copyright 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#define LOG_TAG "Gralloc1Adapter"
+
+#include <stdatomic.h>
+#include <stdlib.h>
+#include <string.h>
+
+#include <pthread.h>
+
+#include <cutils/native_handle.h>
+#include <hardware/gralloc1.h>
+#include <sync/sync.h>
+#include <log/log.h>
+
+#include "gralloc1-adapter.h"
+
+struct gralloc1_adapter_module {
+    struct gralloc_module_t base;
+    struct gralloc1_adapter adapter;
+};
+
+struct gralloc1_adapter_device {
+    struct gralloc1_device base;
+
+    struct alloc_device_t* alloc_dev;
+
+    /* fixed size for thread safety */
+    char saved_dump[4096];
+    size_t saved_dump_size;
+};
+
+/* additional data associated with registered buffer_handle_t */
+struct gralloc1_adapter_buffer_data {
+    struct gralloc1_adapter_buffer_info info;
+
+    atomic_int refcount;
+    bool owned;
+};
+
+struct gralloc1_adapter_buffer_descriptor {
+    int width;
+    int height;
+    int format;
+    int producer_usage;
+    int consumer_usage;
+};
+
+static const struct gralloc1_adapter_module* gralloc1_adapter_module(
+        struct gralloc1_device* dev)
+{
+    return (const struct gralloc1_adapter_module*) dev->common.module;
+}
+
+static struct gralloc1_adapter_device* gralloc1_adapter_device(
+        struct gralloc1_device* dev)
+{
+    return (struct gralloc1_adapter_device*) dev;
+}
+
+static struct gralloc1_adapter_buffer_data* lookup_buffer_data(
+        struct gralloc1_device* dev, buffer_handle_t buffer)
+{
+    const struct gralloc1_adapter_module* mod = gralloc1_adapter_module(dev);
+    if (!mod->adapter.is_registered(&mod->base, buffer))
+        return NULL;
+
+    return mod->adapter.get_data(&mod->base, buffer);
+}
+
+static struct gralloc1_adapter_buffer_descriptor* lookup_buffer_descriptor(
+        struct gralloc1_device* dev, gralloc1_buffer_descriptor_t id)
+{
+    /* do we want to validate? */
+    return (struct gralloc1_adapter_buffer_descriptor*) ((uintptr_t) id);
+}
+
+static void device_dump(struct gralloc1_device* device,
+        uint32_t* outSize, char* outBuffer)
+{
+    struct gralloc1_adapter_device* dev = gralloc1_adapter_device(device);
+
+    if (outBuffer) {
+        uint32_t copy = (uint32_t) dev->saved_dump_size;
+        if (*outSize < copy) {
+            copy = *outSize;
+        } else {
+            *outSize = copy;
+        }
+
+        memcpy(outBuffer, dev->saved_dump, copy);
+    } else {
+        /* dump is optional and may not null-terminate */
+        if (dev->alloc_dev->dump) {
+            dev->alloc_dev->dump(dev->alloc_dev, dev->saved_dump,
+                    sizeof(dev->saved_dump) - 1);
+            dev->saved_dump_size = strlen(dev->saved_dump);
+        }
+
+        *outSize = (uint32_t) dev->saved_dump_size;
+    }
+}
+
+static int32_t device_create_descriptor(struct gralloc1_device* device,
+        gralloc1_buffer_descriptor_t* outDescriptor)
+{
+    struct gralloc1_adapter_buffer_descriptor* desc;
+
+    desc = calloc(1, sizeof(*desc));
+    if (!desc) {
+        return GRALLOC1_ERROR_NO_RESOURCES;
+    }
+
+    *outDescriptor = (gralloc1_buffer_descriptor_t) (uintptr_t) desc;
+
+    return GRALLOC1_ERROR_NONE;
+}
+
+static int32_t device_destroy_descriptor(struct gralloc1_device* device,
+        gralloc1_buffer_descriptor_t descriptor)
+{
+    struct gralloc1_adapter_buffer_descriptor* desc =
+        lookup_buffer_descriptor(device, descriptor);
+    if (!desc) {
+        return GRALLOC1_ERROR_BAD_DESCRIPTOR;
+    }
+
+    free(desc);
+
+    return GRALLOC1_ERROR_NONE;
+}
+
+static int32_t device_set_consumer_usage(struct gralloc1_device* device,
+        gralloc1_buffer_descriptor_t descriptor, uint64_t usage)
+{
+    struct gralloc1_adapter_buffer_descriptor* desc =
+        lookup_buffer_descriptor(device, descriptor);
+    if (!desc) {
+        return GRALLOC1_ERROR_BAD_DESCRIPTOR;
+    }
+
+    desc->consumer_usage = (int) usage;
+
+    return GRALLOC1_ERROR_NONE;
+}
+
+static int32_t device_set_dimensions(struct gralloc1_device* device,
+        gralloc1_buffer_descriptor_t descriptor,
+        uint32_t width, uint32_t height)
+{
+    struct gralloc1_adapter_buffer_descriptor* desc =
+        lookup_buffer_descriptor(device, descriptor);
+    if (!desc) {
+        return GRALLOC1_ERROR_BAD_DESCRIPTOR;
+    }
+
+    desc->width = (int) width;
+    desc->height = (int) height;
+
+    return GRALLOC1_ERROR_NONE;
+}
+
+static int32_t device_set_format(struct gralloc1_device* device,
+        gralloc1_buffer_descriptor_t descriptor, int32_t format)
+{
+    struct gralloc1_adapter_buffer_descriptor* desc =
+        lookup_buffer_descriptor(device, descriptor);
+    if (!desc) {
+        return GRALLOC1_ERROR_BAD_DESCRIPTOR;
+    }
+
+    desc->format = format;
+
+    return GRALLOC1_ERROR_NONE;
+}
+
+static int32_t device_set_producer_usage(struct gralloc1_device* device,
+        gralloc1_buffer_descriptor_t descriptor, uint64_t usage)
+{
+    struct gralloc1_adapter_buffer_descriptor* desc =
+        lookup_buffer_descriptor(device, descriptor);
+    if (!desc) {
+        return GRALLOC1_ERROR_BAD_DESCRIPTOR;
+    }
+
+    desc->producer_usage = (int) usage;
+
+    return GRALLOC1_ERROR_NONE;
+}
+
+static int32_t device_get_backing_store(struct gralloc1_device* device,
+        buffer_handle_t buffer, gralloc1_backing_store_t* outStore)
+{
+    /* we never share backing store */
+    *outStore = (gralloc1_backing_store_t) (uintptr_t) buffer;
+
+    return GRALLOC1_ERROR_NONE;
+}
+
+static int32_t device_get_consumer_usage(struct gralloc1_device* device,
+        buffer_handle_t buffer, uint64_t* outUsage)
+{
+    const struct gralloc1_adapter_buffer_data* data =
+        lookup_buffer_data(device, buffer);
+    if (!data) {
+        return GRALLOC1_ERROR_BAD_HANDLE;
+    }
+
+    *outUsage = data->info.usage;
+
+    return GRALLOC1_ERROR_NONE;
+}
+
+static int32_t device_get_dimensions(struct gralloc1_device* device,
+        buffer_handle_t buffer, uint32_t* outWidth, uint32_t* outHeight)
+{
+    const struct gralloc1_adapter_buffer_data* data =
+        lookup_buffer_data(device, buffer);
+    if (!data) {
+        return GRALLOC1_ERROR_BAD_HANDLE;
+    }
+
+    *outWidth = data->info.width;
+    *outHeight = data->info.height;
+
+    return GRALLOC1_ERROR_NONE;
+}
+
+static int32_t device_get_format(struct gralloc1_device* device,
+        buffer_handle_t buffer, int32_t* outFormat)
+{
+    const struct gralloc1_adapter_buffer_data* data =
+        lookup_buffer_data(device, buffer);
+    if (!data) {
+        return GRALLOC1_ERROR_BAD_HANDLE;
+    }
+
+    *outFormat = data->info.format;
+
+    return GRALLOC1_ERROR_NONE;
+}
+
+static int32_t device_get_producer_usage(struct gralloc1_device* device,
+        buffer_handle_t buffer, uint64_t* outUsage)
+{
+    const struct gralloc1_adapter_buffer_data* data =
+        lookup_buffer_data(device, buffer);
+    if (!data) {
+        return GRALLOC1_ERROR_BAD_HANDLE;
+    }
+
+    *outUsage = data->info.usage;
+
+    return GRALLOC1_ERROR_NONE;
+}
+
+static int32_t device_get_stride(struct gralloc1_device* device,
+        buffer_handle_t buffer, uint32_t* outStride)
+{
+    const struct gralloc1_adapter_buffer_data* data =
+        lookup_buffer_data(device, buffer);
+    if (!data) {
+        return GRALLOC1_ERROR_BAD_HANDLE;
+    }
+
+    *outStride = data->info.stride;
+
+    return GRALLOC1_ERROR_NONE;
+}
+
+static int32_t device_allocate(struct gralloc1_device* device,
+        uint32_t numDescriptors,
+        const gralloc1_buffer_descriptor_t* descriptors,
+        buffer_handle_t* outBuffers)
+{
+    const struct gralloc1_adapter_module* mod =
+        gralloc1_adapter_module(device);
+    struct gralloc1_adapter_device* dev = gralloc1_adapter_device(device);
+    gralloc1_error_t err = GRALLOC1_ERROR_NONE;
+    uint32_t i;
+
+    for (i = 0; i < numDescriptors; i++) {
+        const struct gralloc1_adapter_buffer_descriptor* desc =
+            lookup_buffer_descriptor(device, descriptors[i]);
+        struct gralloc1_adapter_buffer_data* data;
+        buffer_handle_t buffer;
+        int dummy_stride;
+        int ret;
+
+        if (!desc) {
+            err = GRALLOC1_ERROR_BAD_DESCRIPTOR;
+            break;
+        }
+
+        data = calloc(1, sizeof(*data));
+        if (!data) {
+            err = GRALLOC1_ERROR_NO_RESOURCES;
+            break;
+        }
+
+        ret = dev->alloc_dev->alloc(dev->alloc_dev, desc->width, desc->height,
+                desc->format, desc->producer_usage | desc->consumer_usage,
+                &buffer, &dummy_stride);
+        if (ret) {
+            free(data);
+            err = GRALLOC1_ERROR_NO_RESOURCES;
+            break;
+        }
+
+        mod->adapter.get_info(&mod->base, buffer, &data->info);
+        data->refcount = 1;
+        data->owned = true;
+
+        mod->adapter.set_data(&mod->base, buffer, data);
+
+        outBuffers[i] = buffer;
+    }
+
+    if (err != GRALLOC1_ERROR_NONE) {
+        uint32_t j;
+        for (j = 0; j < i; j++) {
+            free(mod->adapter.get_data(&mod->base, outBuffers[i]));
+            dev->alloc_dev->free(dev->alloc_dev, outBuffers[i]);
+        }
+
+        return err;
+    }
+
+    return (numDescriptors > 1) ?
+        GRALLOC1_ERROR_NOT_SHARED : GRALLOC1_ERROR_NONE;
+}
+
+static int32_t device_retain(struct gralloc1_device* device,
+        buffer_handle_t buffer)
+{
+    static pthread_mutex_t register_mutex = PTHREAD_MUTEX_INITIALIZER;
+    const struct gralloc1_adapter_module* mod =
+        gralloc1_adapter_module(device);
+    struct gralloc1_adapter_buffer_data* data;
+
+    pthread_mutex_lock(&register_mutex);
+
+    if (mod->adapter.is_registered(&mod->base, buffer)) {
+        data = mod->adapter.get_data(&mod->base, buffer);
+        data->refcount++;
+    } else {
+        int ret;
+
+        data = calloc(1, sizeof(*data));
+        if (!data) {
+            pthread_mutex_unlock(&register_mutex);
+            return GRALLOC1_ERROR_NO_RESOURCES;
+        }
+
+        ret = mod->base.registerBuffer(&mod->base, buffer);
+        if (ret) {
+            pthread_mutex_unlock(&register_mutex);
+            free(data);
+
+            return GRALLOC1_ERROR_NO_RESOURCES;
+        }
+
+        mod->adapter.get_info(&mod->base, buffer, &data->info);
+        data->refcount = 1;
+        data->owned = false;
+
+        mod->adapter.set_data(&mod->base, buffer, data);
+    }
+
+    pthread_mutex_unlock(&register_mutex);
+
+    return GRALLOC1_ERROR_NONE;
+}
+
+static int32_t device_release(struct gralloc1_device* device,
+        buffer_handle_t buffer)
+{
+    struct gralloc1_adapter_buffer_data* data =
+        lookup_buffer_data(device, buffer);
+    if (!data) {
+        ALOGE("unable to release unregistered buffer %p", buffer);
+        return GRALLOC1_ERROR_BAD_HANDLE;
+    }
+
+    data->refcount--;
+    if (!data->refcount) {
+        if (data->owned) {
+            struct gralloc1_adapter_device* dev =
+                gralloc1_adapter_device(device);
+            dev->alloc_dev->free(dev->alloc_dev, buffer);
+        } else {
+            const struct gralloc1_adapter_module* mod =
+                gralloc1_adapter_module(device);
+            mod->base.unregisterBuffer(&mod->base, buffer);
+
+            native_handle_close(buffer);
+            native_handle_delete((native_handle_t*) buffer);
+        }
+
+        free(data);
+    }
+
+    return GRALLOC1_ERROR_NONE;
+}
+
+static int32_t device_get_num_flex_planes(struct gralloc1_device* device,
+        buffer_handle_t buffer, uint32_t* outNumPlanes)
+{
+    const struct gralloc1_adapter_buffer_data* data =
+        lookup_buffer_data(device, buffer);
+    if (!data) {
+        return GRALLOC1_ERROR_BAD_HANDLE;
+    }
+
+    *outNumPlanes = data->info.num_flex_planes;
+
+    return GRALLOC1_ERROR_NONE;
+}
+
+static int32_t device_lock(struct gralloc1_device* device,
+        buffer_handle_t buffer,
+        uint64_t producerUsage, uint64_t consumerUsage,
+        const gralloc1_rect_t* accessRegion, void** outData,
+        int32_t acquireFence)
+{
+    const struct gralloc1_adapter_module* mod =
+        gralloc1_adapter_module(device);
+    const int usage = (int) (producerUsage | consumerUsage);
+    const struct gralloc1_adapter_buffer_data* data =
+        lookup_buffer_data(device, buffer);
+    int ret;
+
+    if (!data) {
+        ALOGE("unable to lock unregistered buffer %p", buffer);
+        return GRALLOC1_ERROR_BAD_HANDLE;
+    }
+
+    if (mod->adapter.real_module_api_version >=
+            GRALLOC_MODULE_API_VERSION_0_3) {
+        ret = mod->base.lockAsync(&mod->base,
+                buffer, usage,
+                accessRegion->left,
+                accessRegion->top,
+                accessRegion->width,
+                accessRegion->height,
+                outData, acquireFence);
+    } else {
+        if (acquireFence >= 0) {
+            sync_wait(acquireFence, -1);
+        }
+
+        ret = mod->base.lock(&mod->base,
+                buffer, usage,
+                accessRegion->left,
+                accessRegion->top,
+                accessRegion->width,
+                accessRegion->height,
+                outData);
+
+        if (acquireFence >= 0 && !ret) {
+            close(acquireFence);
+        }
+    }
+
+    return (ret) ? GRALLOC1_ERROR_NO_RESOURCES : GRALLOC1_ERROR_NONE;
+}
+
+static int32_t device_lock_flex(struct gralloc1_device* device,
+        buffer_handle_t buffer,
+        uint64_t producerUsage, uint64_t consumerUsage,
+        const gralloc1_rect_t* accessRegion,
+        struct android_flex_layout* outFlexLayout,
+        int32_t acquireFence)
+{
+    const struct gralloc1_adapter_module* mod =
+        gralloc1_adapter_module(device);
+    const int usage = (int) (producerUsage | consumerUsage);
+    const struct gralloc1_adapter_buffer_data* data =
+        lookup_buffer_data(device, buffer);
+    struct android_ycbcr ycbcr;
+    int ret;
+
+    if (!data) {
+        ALOGE("unable to lockFlex unregistered buffer %p", buffer);
+        return GRALLOC1_ERROR_BAD_HANDLE;
+    }
+
+    if (outFlexLayout->num_planes < data->info.num_flex_planes) {
+        return GRALLOC1_ERROR_BAD_VALUE;
+    }
+
+    if (mod->adapter.real_module_api_version >=
+            GRALLOC_MODULE_API_VERSION_0_3 && mod->base.lockAsync_ycbcr) {
+        ret = mod->base.lockAsync_ycbcr(&mod->base,
+                buffer, usage,
+                accessRegion->left,
+                accessRegion->top,
+                accessRegion->width,
+                accessRegion->height,
+                &ycbcr, acquireFence);
+    } else if (mod->base.lock_ycbcr) {
+        if (acquireFence >= 0) {
+            sync_wait(acquireFence, -1);
+        }
+
+        ret = mod->base.lock_ycbcr(&mod->base,
+                buffer, usage,
+                accessRegion->left,
+                accessRegion->top,
+                accessRegion->width,
+                accessRegion->height,
+                &ycbcr);
+
+        if (acquireFence >= 0 && !ret) {
+            close(acquireFence);
+        }
+    } else {
+        return GRALLOC1_ERROR_UNSUPPORTED;
+    }
+
+    if (ret) {
+        return GRALLOC1_ERROR_NO_RESOURCES;
+    }
+
+    mod->adapter.get_flexible_layout(&mod->base, buffer,
+            &ycbcr, outFlexLayout);
+
+    return GRALLOC1_ERROR_NONE;
+}
+
+static int32_t device_unlock(struct gralloc1_device* device,
+        buffer_handle_t buffer, int32_t* outReleaseFence)
+{
+    const struct gralloc1_adapter_module* mod =
+        gralloc1_adapter_module(device);
+    int ret;
+
+    if (mod->adapter.real_module_api_version >=
+            GRALLOC_MODULE_API_VERSION_0_3) {
+        ret = mod->base.unlockAsync(&mod->base, buffer, outReleaseFence);
+    } else {
+        ret = mod->base.unlock(&mod->base, buffer);
+        if (!ret) {
+            *outReleaseFence = -1;
+        }
+    }
+
+    return (ret) ? GRALLOC1_ERROR_BAD_HANDLE : GRALLOC1_ERROR_NONE;
+}
+
+static gralloc1_function_pointer_t device_get_function(
+        struct gralloc1_device* device, int32_t descriptor)
+{
+    switch ((gralloc1_function_descriptor_t) descriptor) {
+#define CASE(id, ptr)              \
+    case GRALLOC1_FUNCTION_ ## id: \
+        return (gralloc1_function_pointer_t) device_ ## ptr
+    CASE(DUMP, dump);
+    CASE(CREATE_DESCRIPTOR, create_descriptor);
+    CASE(DESTROY_DESCRIPTOR, destroy_descriptor);
+    CASE(SET_CONSUMER_USAGE, set_consumer_usage);
+    CASE(SET_DIMENSIONS, set_dimensions);
+    CASE(SET_FORMAT, set_format);
+    CASE(SET_PRODUCER_USAGE, set_producer_usage);
+    CASE(GET_BACKING_STORE, get_backing_store);
+    CASE(GET_CONSUMER_USAGE, get_consumer_usage);
+    CASE(GET_DIMENSIONS, get_dimensions);
+    CASE(GET_FORMAT, get_format);
+    CASE(GET_PRODUCER_USAGE, get_producer_usage);
+    CASE(GET_STRIDE, get_stride);
+    CASE(ALLOCATE, allocate);
+    CASE(RETAIN, retain);
+    CASE(RELEASE, release);
+    CASE(GET_NUM_FLEX_PLANES, get_num_flex_planes);
+    CASE(LOCK, lock);
+    CASE(LOCK_FLEX, lock_flex);
+    CASE(UNLOCK, unlock);
+#undef CASE
+    default: return NULL;
+    }
+}
+
+static void device_get_capabilities(struct gralloc1_device* device,
+        uint32_t* outCount, int32_t* outCapabilities)
+{
+    *outCount = 0;
+}
+
+static int device_close(struct hw_device_t* device)
+{
+    struct gralloc1_adapter_device* dev =
+        (struct gralloc1_adapter_device*) device;
+    int ret;
+
+    ret = dev->alloc_dev->common.close(&dev->alloc_dev->common);
+    if (!ret) {
+        free(dev);
+    }
+
+    return ret;
+}
+
+int gralloc1_adapter_device_open(const struct hw_module_t* module,
+        const char* id, struct hw_device_t** device)
+{
+    const struct gralloc1_adapter_module* mod =
+        (const struct gralloc1_adapter_module*) module;
+    struct alloc_device_t* alloc_dev;
+    struct gralloc1_adapter_device* dev;
+    int ret;
+
+    if (strcmp(id, GRALLOC_HARDWARE_MODULE_ID) != 0) {
+        ALOGE("unknown gralloc1 device id: %s", id);
+        return -EINVAL;
+    }
+
+    ret = module->methods->open(module, GRALLOC_HARDWARE_GPU0,
+            (struct hw_device_t**) &alloc_dev);
+    if (ret) {
+        return ret;
+    }
+
+    dev = malloc(sizeof(*dev));
+    if (!dev) {
+        alloc_dev->common.close(&alloc_dev->common);
+        return -ENOMEM;
+    }
+
+    *dev = (struct gralloc1_adapter_device) {
+        .base = {
+            .common = {
+                .tag = HARDWARE_DEVICE_TAG,
+                .version = HARDWARE_DEVICE_API_VERSION(0, 0),
+                .module = (struct hw_module_t*) mod,
+                .close = device_close,
+            },
+            .getCapabilities = device_get_capabilities,
+            .getFunction = device_get_function,
+        },
+        .alloc_dev = alloc_dev,
+    };
+
+    *device = (struct hw_device_t*) dev;
+
+    return 0;
+}
diff --git a/graphics/allocator/2.0/default/gralloc1-adapter.h b/graphics/allocator/2.0/default/gralloc1-adapter.h
new file mode 100644
index 0000000..f48cd9e
--- /dev/null
+++ b/graphics/allocator/2.0/default/gralloc1-adapter.h
@@ -0,0 +1,72 @@
+/*
+ * Copyright 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef ANDROID_HARDWARE_GRALLOC1_ADAPTER_H
+#define ANDROID_HARDWARE_GRALLOC1_ADAPTER_H
+
+#include <stdbool.h>
+#include <hardware/gralloc.h>
+
+__BEGIN_DECLS
+
+struct gralloc1_adapter_buffer_info {
+    int width;
+    int height;
+    int format;
+    int usage;
+
+    int stride;
+    uint32_t num_flex_planes;
+};
+
+/* This struct must be embedded in the HAL's HAL_MODULE_INFO_SYM and must
+ * follow gralloc_module_t immediately. */
+struct gralloc1_adapter {
+    uint16_t real_module_api_version;
+
+    /* Return true if the buffer is registered.  A locally allocated buffer is
+     * always registered.
+     *
+     * This function is called frequently.  It must be thread safe just like
+     * other functions are.
+     */
+    bool (*is_registered)(const struct gralloc_module_t* mod,
+            buffer_handle_t buffer);
+
+    /* Set the adapter data for a registered buffer. */
+    void (*set_data)(const struct gralloc_module_t* mod,
+            buffer_handle_t buffer, void* data);
+
+    /* Get the adapter data for a registered buffer. */
+    void* (*get_data)(const struct gralloc_module_t* mod,
+            buffer_handle_t buffer);
+
+    /* Get the buffer info, such as width, height, etc. */
+    void (*get_info)(const struct gralloc_module_t* mod,
+            buffer_handle_t buffer,
+            struct gralloc1_adapter_buffer_info* info);
+
+    /* Get the flexilble layout matching ycbcr. */
+    void (*get_flexible_layout)(const struct gralloc_module_t* mod,
+            buffer_handle_t buffer, const struct android_ycbcr* ycbcr,
+            struct android_flex_layout* layout);
+};
+
+int gralloc1_adapter_device_open(const struct hw_module_t* module,
+        const char* id, struct hw_device_t** device);
+
+__END_DECLS
+
+#endif /* ANDROID_HARDWARE_GRALLOC1_ADAPTER_H */
diff --git a/graphics/allocator/2.0/types.hal b/graphics/allocator/2.0/types.hal
new file mode 100644
index 0000000..23b7345
--- /dev/null
+++ b/graphics/allocator/2.0/types.hal
@@ -0,0 +1,171 @@
+/*
+ * Copyright (C) 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.graphics.allocator@2.0;
+
+enum Error : int32_t {
+    NONE            = 0, /* no error */
+    BAD_DESCRIPTOR  = 1, /* invalid BufferDescriptor */
+    BAD_BUFFER      = 2, /* invalid Buffer */
+    BAD_VALUE       = 3, /* invalid width, height, etc. */
+    NOT_SHARED      = 4, /* buffers not sharing backing store */
+    NO_RESOURCES    = 5, /* temporary failure due to resource contention */
+    UNDEFINED       = 6, /* an operation has no defined meaning */
+    UNSUPPORTED     = 7, /* permanent failure */
+};
+
+enum ProducerUsage : uint64_t {
+    /* bit 0 is reserved */
+
+    /* buffer will be read by CPU occasionally */
+    CPU_READ        = 1ULL << 1,
+    /* buffer will be read by CPU frequently */
+    CPU_READ_OFTEN  = 1ULL << 2,
+
+    /* bit 3 is reserved */
+    /* bit 4 is reserved */
+
+    /* buffer will be written by CPU occasionally */
+    CPU_WRITE       = 1ULL << 5,
+    /* buffer will be written by CPU frequently */
+    CPU_WRITE_OFTEN = 1ULL << 6,
+
+    /* bit 7 is reserved */
+    /* bit 8 is reserved */
+
+    /* buffer will be used as a GPU render target */
+    GPU_RENDER_TARGET = 1ULL << 9,
+
+    /* bit 10 is reserved */
+    /* bit 11 is reserved */
+    /* bit 12 is reserved */
+    /* bit 13 is reserved */
+
+    /*
+     * Buffer is allocated with hardware-level protection against copying the
+     * contents (or information derived from the contents) into unprotected
+     * memory.
+     */
+    PROTECTED         = 1ULL << 14,
+
+    /* bit 15 is reserved */
+    /* bit 16 is reserved */
+
+    /* buffer will be used as a camera HAL output */
+    CAMERA            = 1ULL << 17,
+
+    /* bit 18 is reserved */
+    /* bit 19 is reserved */
+    /* bit 20 is reserved */
+    /* bit 21 is reserved */
+
+    /* buffer will be used as a video decoder output */
+    VIDEO_DECODER     = 1ULL << 22,
+
+    /* bits 23-27 are reserved for future versions */
+    /* bits 28-31 are reserved for vendor extensions */
+
+    /* bits 32-47 are reserved for future versions */
+    /* bits 48-63 are reserved for vendor extensions */
+};
+
+enum ConsumerUsage : uint64_t {
+    /* bit 0 is reserved */
+
+    /* buffer will be read by CPU occasionally */
+    CPU_READ          = 1ULL << 1,
+    /* buffer will be read by CPU frequently */
+    CPU_READ_OFTEN    = 1ULL << 2,
+
+    /* bit 3 is reserved */
+    /* bit 4 is reserved */
+    /* bit 5 is reserved */
+    /* bit 6 is reserved */
+    /* bit 7 is reserved */
+
+    /* buffer will be used as a GPU texture */
+    GPU_TEXTURE       = 1ULL << 8,
+
+    /* bit 9 is reserved */
+    /* bit 10 is reserved */
+
+    /* buffer will be used by hwcomposer HAL */
+    HWCOMPOSER        = 1ULL << 11,
+    /* buffer will be as a hwcomposer HAL client target */
+    CLIENT_TARGET     = 1ULL << 12,
+
+    /* bit 13 is reserved */
+    /* bit 14 is reserved */
+
+    /* buffer will be used as a hwcomposer HAL cursor */
+    CURSOR            = 1ULL << 15,
+
+    /* buffer will be used as a video encoder input */
+    VIDEO_ENCODER     = 1ULL << 16,
+
+    /* bit 17 is reserved */
+
+    /* buffer will be used as a camera HAL input */
+    CAMERA            = 1ULL << 18,
+
+    /* bit 19 is reserved */
+
+    /* buffer will be used as a renderscript allocation */
+    RENDERSCRIPT      = 1ULL << 20,
+
+    /* bit 21 is reserved */
+    /* bit 22 is reserved */
+
+    /* bits 23-27 are reserved for future versions */
+    /* bits 28-31 are reserved for vendor extensions */
+
+    /* bits 32-47 are reserved for future versions */
+    /* bits 48-63 are reserved for vendor extensions */
+};
+
+/*
+ * Copied from android_pixel_format_t.
+ *
+ * TODO(olv) copy comments as well and have android_pixel_format_t generated
+ */
+@export(name="android_pixel_format", value_prefix="HAL_PIXEL_FORMAT_")
+enum PixelFormat : int32_t {
+    RGBA_8888              = 1,
+    RGBX_8888              = 2,
+    RGB_888                = 3,
+    RGB_565                = 4,
+    BGRA_8888              = 5,
+    YV12                   = 0x32315659,
+    Y8                     = 0x20203859,
+    Y16                    = 0x20363159,
+    RAW16                  = 0x20,
+    RAW10                  = 0x25,
+    RAW12                  = 0x26,
+    RAW_OPAQUE             = 0x24,
+    BLOB                   = 0x21,
+    IMPLEMENTATION_DEFINED = 0x22,
+    YCbCr_420_888          = 0x23,
+    YCbCr_422_888          = 0x27,
+    YCbCr_444_888          = 0x28,
+    FLEX_RGB_888           = 0x29,
+    FLEX_RGBA_8888         = 0x2A,
+    YCbCr_422_SP           = 0x10,
+    YCrCb_420_SP           = 0x11,
+    YCbCr_422_I            = 0x14,
+};
+
+typedef uint64_t BufferDescriptor;
+typedef uint64_t Buffer;
diff --git a/graphics/composer/2.1/Android.bp b/graphics/composer/2.1/Android.bp
new file mode 100644
index 0000000..3c63a68
--- /dev/null
+++ b/graphics/composer/2.1/Android.bp
@@ -0,0 +1,55 @@
+// This file is autogenerated by hidl-gen. Do not edit manually.
+
+genrule {
+    name: "android.hardware.graphics.composer@2.1_genc++",
+    tool: "hidl-gen",
+    cmd: "$tool -o $genDir -Lc++ -randroid.hardware:hardware/interfaces android.hardware.graphics.composer@2.1",
+    srcs: [
+        "types.hal",
+        "IComposer.hal",
+        "IComposerCallback.hal",
+    ],
+    out: [
+        "android/hardware/graphics/composer/2.1/types.cpp",
+        "android/hardware/graphics/composer/2.1/ComposerAll.cpp",
+        "android/hardware/graphics/composer/2.1/ComposerCallbackAll.cpp",
+    ],
+}
+
+genrule {
+    name: "android.hardware.graphics.composer@2.1_genc++_headers",
+    tool: "hidl-gen",
+    cmd: "$tool -o $genDir -Lc++ -randroid.hardware:hardware/interfaces android.hardware.graphics.composer@2.1",
+    srcs: [
+        "types.hal",
+        "IComposer.hal",
+        "IComposerCallback.hal",
+    ],
+    out: [
+        "android/hardware/graphics/composer/2.1/types.h",
+        "android/hardware/graphics/composer/2.1/IComposer.h",
+        "android/hardware/graphics/composer/2.1/IHwComposer.h",
+        "android/hardware/graphics/composer/2.1/BnComposer.h",
+        "android/hardware/graphics/composer/2.1/BpComposer.h",
+        "android/hardware/graphics/composer/2.1/BsComposer.h",
+        "android/hardware/graphics/composer/2.1/IComposerCallback.h",
+        "android/hardware/graphics/composer/2.1/IHwComposerCallback.h",
+        "android/hardware/graphics/composer/2.1/BnComposerCallback.h",
+        "android/hardware/graphics/composer/2.1/BpComposerCallback.h",
+        "android/hardware/graphics/composer/2.1/BsComposerCallback.h",
+    ],
+}
+
+cc_library_shared {
+    name: "android.hardware.graphics.composer@2.1",
+    generated_sources: ["android.hardware.graphics.composer@2.1_genc++"],
+    generated_headers: ["android.hardware.graphics.composer@2.1_genc++_headers"],
+    export_generated_headers: ["android.hardware.graphics.composer@2.1_genc++_headers"],
+    shared_libs: [
+        "libhidl",
+        "libhwbinder",
+        "libutils",
+        "libcutils",
+        "android.hardware.graphics.allocator@2.0",
+    ],
+}
diff --git a/graphics/composer/2.1/IComposer.hal b/graphics/composer/2.1/IComposer.hal
new file mode 100644
index 0000000..7bfa22b
--- /dev/null
+++ b/graphics/composer/2.1/IComposer.hal
@@ -0,0 +1,1166 @@
+/*
+ * Copyright (C) 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.graphics.composer@2.1;
+
+import android.hardware.graphics.allocator@2.0::PixelFormat;
+import IComposerCallback;
+
+interface IComposer {
+    /*
+     * Optional capabilities which may be supported by some devices. The
+     * particular set of supported capabilities for a given device may be
+     * retrieved using getCapabilities.
+     */
+    enum Capability : int32_t {
+        INVALID = 0,
+
+        /*
+         * Specifies that the device supports sideband stream layers, for
+         * which buffer content updates and other synchronization will not be
+         * provided through the usual validate/present cycle and must be
+         * handled by an external implementation-defined mechanism. Only
+         * changes to layer state (such as position, size, etc.) need to be
+         * performed through the validate/present cycle.
+         */
+        SIDEBAND_STREAM = 1,
+
+        /*
+         * Specifies that the device will apply a color transform even when
+         * either the client or the device has chosen that all layers should
+         * be composed by the client. This will prevent the client from
+         * applying the color transform during its composition step.
+         */
+        SKIP_CLIENT_COLOR_TRANSFORM = 2,
+    };
+
+    /* Display attributes queryable through getDisplayAttribute. */
+    enum Attribute : int32_t {
+        INVALID = 0,
+
+        /* Dimensions in pixels */
+        WIDTH = 1,
+        HEIGHT = 2,
+
+        /* Vsync period in nanoseconds */
+        VSYNC_PERIOD = 3,
+
+        /*
+         * Dots per thousand inches (DPI * 1000). Scaling by 1000 allows these
+         * numbers to be stored in an int32_t without losing too much
+         * precision. If the DPI for a configuration is unavailable or is
+         * considered unreliable, the device may return UNSUPPORTED instead.
+         */
+        DPI_X = 4,
+        DPI_Y = 5,
+    };
+
+    /* Display requests returned by getDisplayRequests. */
+    enum DisplayRequest : uint32_t {
+        /*
+         * Instructs the client to provide a new client target buffer, even if
+         * no layers are marked for client composition.
+         */
+        FLIP_CLIENT_TARGET = 1 << 0,
+
+        /*
+         * Instructs the client to write the result of client composition
+         * directly into the virtual display output buffer. If any of the
+         * layers are not marked as Composition::CLIENT or the given display
+         * is not a virtual display, this request has no effect.
+         */
+        WRITE_CLIENT_TARGET_TO_OUTPUT = 1 << 1,
+    };
+
+    /* Layer requests returned from getDisplayRequests. */
+    enum LayerRequest : uint32_t {
+        /*
+         * The client should clear its target with transparent pixels where
+         * this layer would be. The client may ignore this request if the
+         * layer must be blended.
+         */
+        CLEAR_CLIENT_TARGET = 1 << 0,
+    };
+
+    /* Power modes for use with setPowerMode. */
+    enum PowerMode : int32_t {
+        /* The display is fully off (blanked). */
+        OFF = 0,
+
+        /*
+         * These are optional low power modes. getDozeSupport may be called to
+         * determine whether a given display supports these modes.
+         */
+
+        /*
+         * The display is turned on and configured in a low power state that
+         * is suitable for presenting ambient information to the user,
+         * possibly with lower fidelity than ON, but with greater efficiency.
+         */
+        DOZE = 1,
+
+        /*
+         * The display is configured as in DOZE but may stop applying display
+         * updates from the client. This is effectively a hint to the device
+         * that drawing to the display has been suspended and that the the
+         * device should remain on in a low power state and continue
+         * displaying its current contents indefinitely until the power mode
+         * changes.
+         *
+         * This mode may also be used as a signal to enable hardware-based
+         * doze functionality. In this case, the device is free to take over
+         * the display and manage it autonomously to implement a low power
+         * always-on display.
+         */
+        DOZE_SUSPEND = 3,
+
+        /* The display is fully on. */
+        ON = 2,
+    };
+
+    /* Vsync values passed to setVsyncEnabled. */
+    enum Vsync : int32_t {
+        INVALID = 0,
+
+        /* Enable vsync. */
+        ENABLE = 1,
+
+        /* Disable vsync. */
+        DISABLE = 2,
+    };
+
+    /* Blend modes, settable per layer. */
+    enum BlendMode : int32_t {
+        INVALID = 0,
+
+        /* colorOut = colorSrc */
+        NONE = 1,
+
+        /* colorOut = colorSrc + colorDst * (1 - alphaSrc) */
+        PREMULTIPLIED = 2,
+
+        /* colorOut = colorSrc * alphaSrc + colorDst * (1 - alphaSrc) */
+        COVERAGE = 3,
+    };
+
+    /* Possible composition types for a given layer. */
+    enum Composition : int32_t {
+        INVALID = 0,
+
+        /*
+         * The client will composite this layer into the client target buffer
+         * (provided to the device through setClientTarget).
+         *
+         * The device must not request any composition type changes for layers
+         * of this type.
+         */
+        CLIENT = 1,
+
+        /*
+         * The device will handle the composition of this layer through a
+         * hardware overlay or other similar means.
+         *
+         * Upon validateDisplay, the device may request a change from this
+         * type to CLIENT.
+         */
+        DEVICE = 2,
+
+        /*
+         * The device will render this layer using the color set through
+         * setLayerColor. If this functionality is not supported on a layer
+         * that the client sets to SOLID_COLOR, the device must request that
+         * the composition type of that layer is changed to CLIENT upon the
+         * next call to validateDisplay.
+         *
+         * Upon validateDisplay, the device may request a change from this
+         * type to CLIENT.
+         */
+        SOLID_COLOR = 3,
+
+        /*
+         * Similar to DEVICE, but the position of this layer may also be set
+         * asynchronously through setCursorPosition. If this functionality is
+         * not supported on a layer that the client sets to CURSOR, the device
+         * must request that the composition type of that layer is changed to
+         * CLIENT upon the next call to validateDisplay.
+         *
+         * Upon validateDisplay, the device may request a change from this
+         * type to either DEVICE or CLIENT.  Changing to DEVICE will prevent
+         * the use of setCursorPosition but still permit the device to
+         * composite the layer.
+         */
+        CURSOR = 4,
+
+        /*
+         * The device will handle the composition of this layer, as well as
+         * its buffer updates and content synchronization. Only supported on
+         * devices which provide Capability::SIDEBAND_STREAM.
+         *
+         * Upon validateDisplay, the device may request a change from this
+         * type to either DEVICE or CLIENT, but it is unlikely that content
+         * will display correctly in these cases.
+         */
+        SIDEBAND = 5,
+    };
+
+    /* Display types returned by getDisplayType. */
+    enum DisplayType : int32_t {
+        INVALID = 0,
+
+        /*
+         * All physical displays, including both internal displays and
+         * hotpluggable external displays.
+         */
+        PHYSICAL = 1,
+
+        /* Virtual displays created by createVirtualDisplay. */
+        VIRTUAL = 2,
+    };
+
+    struct Rect {
+        int32_t left;
+        int32_t top;
+        int32_t right;
+        int32_t bottom;
+    };
+
+    struct FRect {
+        float left;
+        float top;
+        float right;
+        float bottom;
+    };
+
+    struct Color {
+        uint8_t r;
+        uint8_t g;
+        uint8_t b;
+        uint8_t a;
+    };
+
+    /*
+     * Provides a list of supported capabilities (as described in the
+     * definition of Capability above). This list must not change after
+     * initialization.
+     *
+     * @return capabilities is a list of supported capabilities.
+     */
+    getCapabilities() generates (vec<Capability> capabilities);
+
+    /*
+     * Retrieves implementation-defined debug information, which will be
+     * displayed during, for example, `dumpsys SurfaceFlinger`.
+     *
+     * @return debugInfo is a string of debug information.
+     */
+    dumpDebugInfo() generates (string debugInfo);
+
+    /*
+     * Provides a IComposerCallback object for the device to call.
+     *
+     * @param callback is the IComposerCallback object.
+     */
+    registerCallback(IComposerCallback callback);
+
+    /*
+     * Returns the maximum number of virtual displays supported by this device
+     * (which may be 0). The client will not attempt to create more than this
+     * many virtual displays on this device. This number must not change for
+     * the lifetime of the device.
+     */
+    getMaxVirtualDisplayCount() generates (uint32_t count);
+
+    /*
+     * Creates a new virtual display with the given width and height. The
+     * format passed into this function is the default format requested by the
+     * consumer of the virtual display output buffers.
+     *
+     * The display will be assumed to be on from the time the first frame is
+     * presented until the display is destroyed.
+     *
+     * @param width is the width in pixels.
+     * @param height is the height in pixels.
+     * @param formatHint is the default output buffer format selected by
+     *        the consumer.
+     * @return error is NONE upon success. Otherwise,
+     *         UNSUPPORTED when the width or height is too large for the
+     *                     device to be able to create a virtual display.
+     *         NO_RESOURCES when the device is unable to create a new virtual
+     *                      display at this time.
+     * @return display is the newly-created virtual display.
+     * @return format is the format of the buffer the device will produce.
+     */
+    createVirtualDisplay(uint32_t width,
+                         uint32_t height,
+                         PixelFormat formatHint)
+              generates (Error error,
+                         Display display,
+                         PixelFormat format);
+
+    /*
+     * Destroys a virtual display. After this call all resources consumed by
+     * this display may be freed by the device and any operations performed on
+     * this display should fail.
+     *
+     * @param display is the virtual display to destroy.
+     * @return error is NONE upon success. Otherwise,
+     *         BAD_DISPLAY when an invalid display handle was passed in.
+     *         BAD_PARAMETER when the display handle which was passed in does
+     *                       not refer to a virtual display.
+     */
+    destroyVirtualDisplay(Display display) generates (Error error);
+
+    /*
+     * Accepts the changes required by the device from the previous
+     * validateDisplay call (which may be queried using
+     * getChangedCompositionTypes) and revalidates the display. This function
+     * is equivalent to requesting the changed types from
+     * getChangedCompositionTypes, setting those types on the corresponding
+     * layers, and then calling validateDisplay again.
+     *
+     * After this call it must be valid to present this display. Calling this
+     * after validateDisplay returns 0 changes must succeed with NONE, but
+     * should have no other effect.
+     *
+     * @return error is NONE upon success. Otherwise,
+     *         BAD_DISPLAY when an invalid display handle was passed in.
+     *         NOT_VALIDATED when validateDisplay has not been called.
+     */
+    acceptDisplayChanges(Display display) generates (Error error);
+
+    /*
+     * Creates a new layer on the given display.
+     *
+     * @param display is the display on which to create the layer.
+     * @return error is NONE upon success. Otherwise,
+     *         BAD_DISPLAY when an invalid display handle was passed in.
+     *         NO_RESOURCES when the device was unable to create a layer this
+     *                      time.
+     * @return layer is the handle of the new layer.
+     */
+    createLayer(Display display) generates (Error error, Layer layer);
+
+    /*
+     * Destroys the given layer.
+     *
+     * @param display is the display on which the layer was created.
+     * @param layer is the layer to destroy.
+     * @return error is NONE upon success. Otherwise,
+     *         BAD_DISPLAY when an invalid display handle was passed in.
+     *         BAD_LAYER when an invalid layer handle was passed in.
+     */
+    destroyLayer(Display display, Layer layer) generates (Error error);
+
+    /*
+     * Retrieves which display configuration is currently active.
+     *
+     * If no display configuration is currently active, this function must
+     * return BAD_CONFIG. It is the responsibility of the client to call
+     * setActiveConfig with a valid configuration before attempting to present
+     * anything on the display.
+     *
+     * @param display is the display to which the active config is queried.
+     * @return error is NONE upon success. Otherwise,
+     *         BAD_DISPLAY when an invalid display handle was passed in.
+     *         BAD_CONFIG when no configuration is currently active.
+     * @return config is the currently active display configuration.
+     */
+    getActiveConfig(Display display) generates (Error error, Config config);
+
+    /*
+     * Retrieves the layers for which the device requires a different
+     * composition type than had been set prior to the last call to
+     * validateDisplay. The client will either update its state with these
+     * types and call acceptDisplayChanges, or will set new types and attempt
+     * to validate the display again.
+     *
+     * The number of changed layers must be the same as the value returned in
+     * numTypes from the last call to validateDisplay.
+     *
+     * @param display is the display to query.
+     * @return error is NONE upon success. Otherwise,
+     *         BAD_DISPLAY when an invalid display handle was passed in.
+     *         NOT_VALIDATED when validateDisplay has not been called.
+     * @return layers is an array of layer handles.
+     * @return types is an array of composition types, each corresponding to
+     *         an element of layers.
+     */
+    getChangedCompositionTypes(Display display)
+                    generates (Error error,
+                               vec<Layer> layers,
+                               vec<Composition> types);
+
+    /*
+     * Returns whether a client target with the given properties can be
+     * handled by the device.
+     *
+     * This function must return true for a client target with width and
+     * height equal to the active display configuration dimensions,
+     * PixelFormat::RGBA_8888, and Dataspace::UNKNOWN. It is not required to
+     * return true for any other configuration.
+     *
+     * @param display is the display to query.
+     * @param width is the client target width in pixels.
+     * @param height is the client target height in pixels.
+     * @param format is the client target format.
+     * @param dataspace is the client target dataspace, as described in
+     *        setLayerDataspace.
+     * @return error is NONE upon success. Otherwise,
+     *         BAD_DISPLAY when an invalid display handle was passed in.
+     *         UNSUPPORTED when the given configuration is not supported.
+     */
+    getClientTargetSupport(Display display,
+                           uint32_t width,
+                           uint32_t height,
+                           PixelFormat format,
+                           Dataspace dataspace)
+                generates (Error error);
+
+    /*
+     * Returns the color modes supported on this display.
+     *
+     * All devices must support at least ColorMode::NATIVE.
+     *
+     * @param display is the display to query.
+     * @return error is NONE upon success. Otherwise,
+     *         BAD_DISPLAY when an invalid display handle was passed in.
+     * @return modes is an array of color modes.
+     */
+    getColorModes(Display display)
+       generates (Error error,
+                  vec<ColorMode> modes);
+
+    /*
+     * Returns a display attribute value for a particular display
+     * configuration.
+     *
+     * @param display is the display to query.
+     * @param config is the display configuration for which to return
+     *        attribute values.
+     * @return error is NONE upon success. Otherwise,
+     *         BAD_DISPLAY when an invalid display handle was passed in.
+     *         BAD_CONFIG when config does not name a valid configuration for
+     *                    this display.
+     *         BAD_PARAMETER when attribute is unrecognized.
+     *         UNSUPPORTED when attribute cannot be queried for the config.
+     * @return value is the value of the attribute.
+     */
+    getDisplayAttribute(Display display,
+                        Config config,
+                        Attribute attribute)
+             generates (Error error,
+                        int32_t value);
+
+    /*
+     * Returns handles for all of the valid display configurations on this
+     * display.
+     *
+     * @param display is the display to query.
+     * @return error is NONE upon success. Otherwise,
+     *         BAD_DISPLAY when an invalid display handle was passed in.
+     * @return configs is an array of configuration handles.
+     */
+    getDisplayConfigs(Display display)
+           generates (Error error,
+                      vec<Config> configs);
+
+    /*
+     * Returns a human-readable version of the display's name.
+     *
+     * @return error is NONE upon success. Otherwise,
+     *         BAD_DISPLAY when an invalid display handle was passed in.
+     * @return name is the name of the display.
+     */
+    getDisplayName(Display display) generates (Error error, string name);
+
+    /*
+     * Returns the display requests and the layer requests required for the
+     * last validated configuration.
+     *
+     * Display requests provide information about how the client should handle
+     * the client target. Layer requests provide information about how the
+     * client should handle an individual layer.
+     *
+     * The number of layer requests must be equal to the value returned in
+     * numRequests from the last call to validateDisplay.
+     *
+     * @param display is the display to query.
+     * @return error is NONE upon success. Otherwise,
+     *         BAD_DISPLAY when an invalid display handle was passed in.
+     *         NOT_VALIDATED when validateDisplay has not been called.
+     * @return displayRequestMask is the display requests for the current
+     *         validated state.
+     * @return layers is an array of layers which all have at least one
+     *         request.
+     * @return layerRequestMasks is the requests corresponding to each element
+     *         of layers.
+     */
+    getDisplayRequests(Display display)
+            generates (Error error,
+                       uint32_t displayRequestMask,
+                       vec<Layer> layers,
+                       vec<uint32_t> layerRequestMasks);
+
+    /*
+     * Returns whether the given display is a physical or virtual display.
+     *
+     * @param display is the display to query.
+     * @return error is NONE upon success. Otherwise,
+     *         BAD_DISPLAY when an invalid display handle was passed in.
+     * @return type is the type of the display.
+     */
+    getDisplayType(Display display) generates (Error error, DisplayType type);
+
+    /*
+     * Returns whether the given display supports PowerMode::DOZE and
+     * PowerMode::DOZE_SUSPEND. DOZE_SUSPEND may not provide any benefit over
+     * DOZE (see the definition of PowerMode for more information), but if
+     * both DOZE and DOZE_SUSPEND are no different from PowerMode::ON, the
+     * device should not claim support.
+     *
+     * @param display is the display to query.
+     * @return error is NONE upon success. Otherwise,
+     *         BAD_DISPLAY when an invalid display handle was passed in.
+     * @return support is true only when the display supports doze modes.
+     */
+    getDozeSupport(Display display) generates (Error error, bool support);
+
+    /*
+     * Returns the high dynamic range (HDR) capabilities of the given display,
+     * which are invariant with regard to the active configuration.
+     *
+     * Displays which are not HDR-capable must return no types.
+     *
+     * @param display is the display to query.
+     * @return error is NONE upon success. Otherwise,
+     *         BAD_DISPLAY when an invalid display handle was passed in.
+     * @return types is an array of HDR types, may have 0 elements if the
+     *         display is not HDR-capable.
+     * @return maxLuminance is the desired content maximum luminance for this
+     *         display in cd/m^2.
+     * @return maxAverageLuminance - the desired content maximum frame-average
+     *         luminance for this display in cd/m^2.
+     * @return minLuminance is the desired content minimum luminance for this
+     *         display in cd/m^2.
+     */
+    getHdrCapabilities(Display display)
+            generates (Error error,
+                       vec<Hdr> types,
+                       float maxLuminance,
+                       float maxAverageLuminance,
+                       float minLuminance);
+
+    /*
+     * Retrieves the release fences for device layers on this display which
+     * will receive new buffer contents this frame.
+     *
+     * A release fence is a file descriptor referring to a sync fence object
+     * which will be signaled after the device has finished reading from the
+     * buffer presented in the prior frame. This indicates that it is safe to
+     * start writing to the buffer again. If a given layer's fence is not
+     * returned from this function, it will be assumed that the buffer
+     * presented on the previous frame is ready to be written.
+     *
+     * The fences returned by this function should be unique for each layer
+     * (even if they point to the same underlying sync object).
+     *
+     * @param display is the display to query.
+     * @return error is NONE upon success. Otherwise,
+     *         BAD_DISPLAY when an invalid display handle was passed in.
+     * @return layers is an array of layer handles.
+     * @return fences is handle that contains an array of sync fence file
+     *         descriptors as described above, each corresponding to an
+     *         element of layers.
+     */
+    getReleaseFences(Display display)
+          generates (Error error,
+                     vec<Layer> layers,
+                     handle releaseFences);
+
+    /*
+     * Presents the current display contents on the screen (or in the case of
+     * virtual displays, into the output buffer).
+     *
+     * Prior to calling this function, the display must be successfully
+     * validated with validateDisplay. Note that setLayerBuffer and
+     * setLayerSurfaceDamage specifically do not count as layer state, so if
+     * there are no other changes to the layer state (or to the buffer's
+     * properties as described in setLayerBuffer), then it is safe to call
+     * this function without first validating the display.
+     *
+     * If this call succeeds, presentFence will be populated with a file
+     * descriptor referring to a present sync fence object. For physical
+     * displays, this fence will be signaled at the vsync when the result of
+     * composition of this frame starts to appear (for video-mode panels) or
+     * starts to transfer to panel memory (for command-mode panels). For
+     * virtual displays, this fence will be signaled when writes to the output
+     * buffer have completed and it is safe to read from it.
+     *
+     * @param display is the display to present.
+     * @return error is NONE upon success. Otherwise,
+     *         BAD_DISPLAY when an invalid display handle was passed in.
+     *         NO_RESOURCES when no valid output buffer has been set for a
+     *                      virtual display.
+     *         NOT_VALIDATED when validateDisplay has not successfully been
+     *                       called for this display.
+     * @return presentFence is a sync fence file descriptor as described
+     *         above.
+     */
+    presentDisplay(Display display)
+        generates (Error error,
+                   handle presentFence);
+
+    /*
+     * Sets the active configuration for this display. Upon returning, the
+     * given display configuration should be active and remain so until either
+     * this function is called again or the display is disconnected.
+     *
+     * @param display is the display to which the active config is set.
+     * @param config is the new display configuration.
+     * @return error is NONE upon success. Otherwise,
+     *         BAD_DISPLAY when an invalid display handle was passed in.
+     *         BAD_CONFIG when the configuration handle passed in is not valid
+     *                    for this display.
+     */
+    setActiveConfig(Display display, Config config) generates (Error error);
+
+    /*
+     * Sets the buffer handle which will receive the output of client
+     * composition.  Layers marked as Composition::CLIENT will be composited
+     * into this buffer prior to the call to presentDisplay, and layers not
+     * marked as Composition::CLIENT should be composited with this buffer by
+     * the device.
+     *
+     * The buffer handle provided may be empty if no layers are being
+     * composited by the client. This must not result in an error (unless an
+     * invalid display handle is also provided).
+     *
+     * Also provides a file descriptor referring to an acquire sync fence
+     * object, which will be signaled when it is safe to read from the client
+     * target buffer.  If it is already safe to read from this buffer, an
+     * empty handle may be passed instead.
+     *
+     * For more about dataspaces, see setLayerDataspace.
+     *
+     * The damage parameter describes a surface damage region as defined in
+     * the description of setLayerSurfaceDamage.
+     *
+     * Will be called before presentDisplay if any of the layers are marked as
+     * Composition::CLIENT. If no layers are so marked, then it is not
+     * necessary to call this function. It is not necessary to call
+     * validateDisplay after changing the target through this function.
+     *
+     * @param display is the display to which the client target is set.
+     * @param target is the new target buffer.
+     * @param acquireFence is a sync fence file descriptor as described above.
+     * @param dataspace is the dataspace of the buffer, as described in
+     *        setLayerDataspace.
+     * @param damage is the surface damage region.
+     * @return error is NONE upon success. Otherwise,
+     *         BAD_DISPLAY when an invalid display handle was passed in.
+     *         BAD_PARAMETER when the new target handle was invalid.
+     */
+    setClientTarget(Display display,
+                    handle target,
+                    handle acquireFence,
+                    Dataspace dataspace,
+                    vec<Rect> damage)
+         generates (Error error);
+
+    /*
+     * Sets the color mode of the given display.
+     *
+     * Upon returning from this function, the color mode change must have
+     * fully taken effect.
+     *
+     * All devices must support at least ColorMode::NATIVE, and displays are
+     * assumed to be in this mode upon hotplug.
+     *
+     * @param display is the display to which the color mode is set.
+     * @param mode is the mode to set to.
+     * @return error is NONE upon success. Otherwise,
+     *         BAD_DISPLAY when an invalid display handle was passed in.
+     *         BAD_PARAMETER when mode is not a valid color mode.
+     *         UNSUPPORTED when mode is not supported on this display.
+     */
+    setColorMode(Display display, ColorMode mode) generates (Error error);
+
+    /*
+     * Sets a color transform which will be applied after composition.
+     *
+     * If hint is not ColorTransform::ARBITRARY, then the device may use the
+     * hint to apply the desired color transform instead of using the color
+     * matrix directly.
+     *
+     * If the device is not capable of either using the hint or the matrix to
+     * apply the desired color transform, it should force all layers to client
+     * composition during validateDisplay.
+     *
+     * If Capability::SKIP_CLIENT_COLOR_TRANSFORM is present, then the client
+     * will never apply the color transform during client composition, even if
+     * all layers are being composed by the client.
+     *
+     * The matrix provided is an affine color transformation of the following
+     * form:
+     *
+     * |r.r r.g r.b 0|
+     * |g.r g.g g.b 0|
+     * |b.r b.g b.b 0|
+     * |Tr  Tg  Tb  1|
+     *
+     * This matrix will be provided in row-major form:
+     *
+     * {r.r, r.g, r.b, 0, g.r, ...}.
+     *
+     * Given a matrix of this form and an input color [R_in, G_in, B_in], the
+     * output color [R_out, G_out, B_out] will be:
+     *
+     * R_out = R_in * r.r + G_in * g.r + B_in * b.r + Tr
+     * G_out = R_in * r.g + G_in * g.g + B_in * b.g + Tg
+     * B_out = R_in * r.b + G_in * g.b + B_in * b.b + Tb
+     *
+     * @param display is the display to which the color transform is set.
+     * @param matrix is a 4x4 transform matrix (16 floats) as described above.
+     * @param hint is a hint value which may be used instead of the given
+     *        matrix unless it is ColorTransform::ARBITRARY.
+     * @return error is NONE upon success. Otherwise,
+     *         BAD_DISPLAY when an invalid display handle was passed in.
+     *         BAD_PARAMETER when hint is not a valid color transform hint.
+     */
+    setColorTransform(Display display,
+                      vec<float> matrix,
+                      ColorTransform hint)
+           generates (Error error);
+
+    /*
+     * Sets the output buffer for a virtual display. That is, the buffer to
+     * which the composition result will be written.
+     *
+     * Also provides a file descriptor referring to a release sync fence
+     * object, which will be signaled when it is safe to write to the output
+     * buffer. If it is already safe to write to the output buffer, an empty
+     * handle may be passed instead.
+     *
+     * Must be called at least once before presentDisplay, but does not have
+     * any interaction with layer state or display validation.
+     *
+     * @param display is the virtual display to which the output buffer is
+     *        set.
+     * @param buffer is the new output buffer.
+     * @param releaseFence is a sync fence file descriptor as described above.
+     * @return error is NONE upon success. Otherwise,
+     *         BAD_DISPLAY when an invalid display handle was passed in.
+     *         BAD_PARAMETER when the new output buffer handle was invalid.
+     *         UNSUPPORTED when display does not refer to a virtual display.
+     */
+    setOutputBuffer(Display display,
+                    handle buffer,
+                    handle releaseFence)
+         generates (Error error);
+
+    /*
+     * Sets the power mode of the given display. The transition must be
+     * complete when this function returns. It is valid to call this function
+     * multiple times with the same power mode.
+     *
+     * All displays must support PowerMode::ON and PowerMode::OFF.  Whether a
+     * display supports PowerMode::DOZE or PowerMode::DOZE_SUSPEND may be
+     * queried using getDozeSupport.
+     *
+     * @param display is the display to which the power mode is set.
+     * @param mode is the new power mode.
+     * @return error is NONE upon success. Otherwise,
+     *         BAD_DISPLAY when an invalid display handle was passed in.
+     *         BAD_PARAMETER when mode was not a valid power mode.
+     *         UNSUPPORTED when mode is not supported on this display.
+     */
+    setPowerMode(Display display, PowerMode mode) generates (Error error);
+
+    /*
+     * Enables or disables the vsync signal for the given display. Virtual
+     * displays never generate vsync callbacks, and any attempt to enable
+     * vsync for a virtual display though this function must succeed and have
+     * no other effect.
+     *
+     * @param display is the display to which the vsync mode is set.
+     * @param enabled indicates whether to enable or disable vsync
+     * @return error is NONE upon success. Otherwise,
+     *         BAD_DISPLAY when an invalid display handle was passed in.
+     *         BAD_PARAMETER when enabled was an invalid value.
+     */
+    setVsyncEnabled(Display display, Vsync enabled) generates (Error error);
+
+    /*
+     * Instructs the device to inspect all of the layer state and determine if
+     * there are any composition type changes necessary before presenting the
+     * display. Permitted changes are described in the definition of
+     * Composition above.
+     *
+     * Also returns the number of layer requests required by the given layer
+     * configuration.
+     *
+     * @param display is the display to validate.
+     * @return error is NONE or HAS_CHANGES upon success.
+     *         NONE when no changes are necessary and it is safe to present
+     *              the display using the current layer state.
+     *         HAS_CHANGES when composition type changes are needed.
+     *         Otherwise,
+     *         BAD_DISPLAY when an invalid display handle was passed in.
+     * @return numTypes is the number of composition type changes required by
+     *         the device; if greater than 0, the client must either set and
+     *         validate new types, or call acceptDisplayChanges to accept the
+     *         changes returned by getChangedCompositionTypes. It must be the
+     *         same as the number of changes returned by
+     *         getChangedCompositionTypes (see the declaration of that
+     *         function for more information).
+     * @return numRequests is the number of layer requests required by this
+     *         layer configuration. It must be equal to the number of layer
+     *         requests returned by getDisplayRequests (see the declaration of
+     *         that function for more information).
+     */
+    validateDisplay(Display display)
+         generates (Error error,
+                    uint32_t numTypes,
+                    uint32_t numRequests);
+
+    /*
+     * Layer Functions
+     *
+     * These are functions which operate on layers, but which do not modify
+     * state that must be validated before use. See also 'Layer State
+     * Functions' below.
+     */
+
+    /*
+     * Asynchonously sets the position of a cursor layer.
+     *
+     * Prior to validateDisplay, a layer may be marked as Composition::CURSOR.
+     * If validation succeeds (i.e., the device does not request a composition
+     * change for that layer), then once a buffer has been set for the layer
+     * and it has been presented, its position may be set by this function at
+     * any time between presentDisplay and any subsequent validateDisplay
+     * calls for this display.
+     *
+     * Once validateDisplay is called, this function will not be called again
+     * until the validate/present sequence is completed.
+     *
+     * May be called from any thread so long as it is not interleaved with the
+     * validate/present sequence as described above.
+     *
+     * @param display is the display on which the layer was created.
+     * @param layer is the layer to which the position is set.
+     * @param x is the new x coordinate (in pixels from the left of the
+     *        screen).
+     * @param y is the new y coordinate (in pixels from the top of the
+     *        screen).
+     * @return error is NONE upon success. Otherwise,
+     *         BAD_DISPLAY when an invalid display handle was passed in.
+     *         BAD_LAYER when the layer is invalid or is not currently marked
+     *                   as Composition::CURSOR.
+     *         NOT_VALIDATED when the device is currently in the middle of the
+     *                       validate/present sequence.
+     */
+    setCursorPosition(Display display,
+                      Layer layer,
+                      int32_t x,
+                      int32_t y)
+           generates (Error error);
+
+    /*
+     * Sets the buffer handle to be displayed for this layer. If the buffer
+     * properties set at allocation time (width, height, format, and usage)
+     * have not changed since the previous frame, it is not necessary to call
+     * validateDisplay before calling presentDisplay unless new state needs to
+     * be validated in the interim.
+     *
+     * Also provides a file descriptor referring to an acquire sync fence
+     * object, which will be signaled when it is safe to read from the given
+     * buffer. If it is already safe to read from the buffer, an empty handle
+     * may be passed instead.
+     *
+     * This function must return NONE and have no other effect if called for a
+     * layer with a composition type of Composition::SOLID_COLOR (because it
+     * has no buffer) or Composition::SIDEBAND or Composition::CLIENT (because
+     * synchronization and buffer updates for these layers are handled
+     * elsewhere).
+     *
+     * @param display is the display on which the layer was created.
+     * @param layer is the layer to which the buffer is set.
+     * @param buffer is the buffer handle to set.
+     * @param acquireFence is a sync fence file descriptor as described above.
+     * @return error is NONE upon success. Otherwise,
+     *         BAD_DISPLAY when an invalid display handle was passed in.
+     *         BAD_LAYER when an invalid layer handle was passed in.
+     *         BAD_PARAMETER when the buffer handle passed in was invalid.
+     */
+    setLayerBuffer(Display display,
+                   Layer layer,
+                   handle buffer,
+                   handle acquireFence)
+        generates (Error error);
+
+    /*
+     * Provides the region of the source buffer which has been modified since
+     * the last frame. This region does not need to be validated before
+     * calling presentDisplay.
+     *
+     * Once set through this function, the damage region remains the same
+     * until a subsequent call to this function.
+     *
+     * If damage is non-empty, then it may be assumed that any portion of the
+     * source buffer not covered by one of the rects has not been modified
+     * this frame. If damage is empty, then the whole source buffer must be
+     * treated as if it has been modified.
+     *
+     * If the layer's contents are not modified relative to the prior frame,
+     * damage will contain exactly one empty rect([0, 0, 0, 0]).
+     *
+     * The damage rects are relative to the pre-transformed buffer, and their
+     * origin is the top-left corner. They will not exceed the dimensions of
+     * the latched buffer.
+     *
+     * @param display is the display on which the layer was created.
+     * @param layer is the layer to which the damage region is set.
+     * @param damage is the new surface damage region.
+     * @return error is NONE upon success. Otherwise,
+     *         BAD_DISPLAY when an invalid display handle was passed in.
+     *         BAD_LAYER when an invalid layer handle was passed in.
+     */
+    setLayerSurfaceDamage(Display display,
+                          Layer layer,
+                          vec<Rect> damage)
+               generates (Error error);
+
+    /*
+     * Layer State Functions
+     *
+     * These functions modify the state of a given layer. They do not take
+     * effect until the display configuration is successfully validated with
+     * validateDisplay and the display contents are presented with
+     * presentDisplay.
+     */
+
+    /*
+     * Sets the blend mode of the given layer.
+     *
+     * @param display is the display on which the layer was created.
+     * @param layer is the layer to which the blend mode is set.
+     * @param mode is the new blend mode.
+     * @return error is NONE upon success. Otherwise,
+     *         BAD_DISPLAY when an invalid display handle was passed in.
+     *         BAD_LAYER when an invalid layer handle was passed in.
+     *         BAD_PARAMETER when an invalid blend mode was passed in.
+     */
+    setLayerBlendMode(Display display,
+                      Layer layer,
+                      BlendMode mode)
+           generates (Error error);
+
+    /*
+     * Sets the color of the given layer. If the composition type of the layer
+     * is not Composition::SOLID_COLOR, this call must succeed and have no
+     * other effect.
+     *
+     * @param display is the display on which the layer was created.
+     * @param layer is the layer to which the blend mode is set.
+     * @param color is the new color.
+     * @return error is NONE upon success. Otherwise,
+     *         BAD_DISPLAY when an invalid display handle was passed in.
+     *         BAD_LAYER when an invalid layer handle was passed in.
+     */
+    setLayerColor(Display display,
+                  Layer layer,
+                  Color color)
+       generates (Error error);
+
+    /*
+     * Sets the desired composition type of the given layer. During
+     * validateDisplay, the device may request changes to the composition
+     * types of any of the layers as described in the definition of
+     * Composition above.
+     *
+     * @param display is the display on which the layer was created.
+     * @param layer is the layer to which the blend mode is set.
+     * @param type is the new composition type.
+     * @return error is NONE upon success. Otherwise,
+     *         BAD_DISPLAY when an invalid display handle was passed in.
+     *         BAD_LAYER when an invalid layer handle was passed in.
+     *         BAD_PARAMETER when an invalid composition type was passed in.
+     *         UNSUPPORTED when a valid composition type was passed in, but it
+     *                     is not supported by this device.
+     */
+    setLayerCompositionType(Display display,
+                            Layer layer,
+                            Composition type)
+                 generates (Error error);
+
+    /*
+     * Sets the dataspace that the current buffer on this layer is in.
+     *
+     * The dataspace provides more information about how to interpret the
+     * buffer contents, such as the encoding standard and color transform.
+     *
+     * See the values of Dataspace for more information.
+     *
+     * @param display is the display on which the layer was created.
+     * @param layer is the layer to which the dataspace is set.
+     * @param dataspace is the new dataspace.
+     * @return error is NONE upon success. Otherwise,
+     *         BAD_DISPLAY when an invalid display handle was passed in.
+     *         BAD_LAYER when an invalid layer handle was passed in.
+     */
+    setLayerDataspace(Display display,
+                      Layer layer,
+                      Dataspace dataspace)
+           generates (Error error);
+
+    /*
+     * Sets the display frame (the portion of the display covered by a layer)
+     * of the given layer. This frame will not exceed the display dimensions.
+     *
+     * @param display is the display on which the layer was created.
+     * @param layer is the layer to which the frame is set.
+     * @param frame is the new display frame.
+     * @return error is NONE upon success. Otherwise,
+     *         BAD_DISPLAY when an invalid display handle was passed in.
+     *         BAD_LAYER when an invalid layer handle was passed in.
+     */
+    setLayerDisplayFrame(Display display,
+                         Layer layer,
+                         Rect frame)
+              generates (Error error);
+
+    /*
+     * Sets an alpha value (a floating point value in the range [0.0, 1.0])
+     * which will be applied to the whole layer. It can be conceptualized as a
+     * preprocessing step which applies the following function:
+     *   if (blendMode == BlendMode::PREMULTIPLIED)
+     *       out.rgb = in.rgb * planeAlpha
+     *   out.a = in.a * planeAlpha
+     *
+     * If the device does not support this operation on a layer which is
+     * marked Composition::DEVICE, it must request a composition type change
+     * to Composition::CLIENT upon the next validateDisplay call.
+     *
+     * @param display is the display on which the layer was created.
+     * @param layer is the layer to which the plane alpha is set.
+     * @param alpha is the plane alpha value to apply.
+     * @return error is NONE upon success. Otherwise,
+     *         BAD_DISPLAY when an invalid display handle was passed in.
+     *         BAD_LAYER when an invalid layer handle was passed in.
+     */
+    setLayerPlaneAlpha(Display display,
+                       Layer layer,
+                       float alpha)
+            generates (Error error);
+
+    /*
+     * Sets the sideband stream for this layer. If the composition type of the
+     * given layer is not Composition::SIDEBAND, this call must succeed and
+     * have no other effect.
+     *
+     * @param display is the display on which the layer was created.
+     * @param layer is the layer to which the sideband stream is set.
+     * @param stream is the new sideband stream.
+     * @return error is NONE upon success. Otherwise,
+     *         BAD_DISPLAY when an invalid display handle was passed in.
+     *         BAD_LAYER when an invalid layer handle was passed in.
+     *         BAD_PARAMETER when an invalid sideband stream was passed in.
+     */
+    setLayerSidebandStream(Display display,
+                           Layer layer,
+                           handle stream)
+                generates (Error error);
+
+    /*
+     * Sets the source crop (the portion of the source buffer which will fill
+     * the display frame) of the given layer. This crop rectangle will not
+     * exceed the dimensions of the latched buffer.
+     *
+     * If the device is not capable of supporting a true float source crop
+     * (i.e., it will truncate or round the floats to integers), it should set
+     * this layer to Composition::CLIENT when crop is non-integral for the
+     * most accurate rendering.
+     *
+     * If the device cannot support float source crops, but still wants to
+     * handle the layer, it should use the following code (or similar) to
+     * convert to an integer crop:
+     *   intCrop.left = (int) ceilf(crop.left);
+     *   intCrop.top = (int) ceilf(crop.top);
+     *   intCrop.right = (int) floorf(crop.right);
+     *   intCrop.bottom = (int) floorf(crop.bottom);
+     *
+     * @param display is the display on which the layer was created.
+     * @param layer is the layer to which the source crop is set.
+     * @param crop is the new source crop.
+     * @return error is NONE upon success. Otherwise,
+     *         BAD_DISPLAY when an invalid display handle was passed in.
+     *         BAD_LAYER when an invalid layer handle was passed in.
+     */
+    setLayerSourceCrop(Display display,
+                       Layer layer,
+                       FRect crop)
+            generates (Error error);
+
+    /*
+     * Sets the transform (rotation/flip) of the given layer.
+     *
+     * @param display is the display on which the layer was created.
+     * @param layer is the layer to which the transform is set.
+     * @param transform is the new transform.
+     * @return error is NONE upon success. Otherwise,
+     *         BAD_DISPLAY when an invalid display handle was passed in.
+     *         BAD_LAYER when an invalid layer handle was passed in.
+     *         BAD_PARAMETER when an invalid transform was passed in.
+     */
+    setLayerTransform(Display display,
+                      Layer layer,
+                      Transform transform)
+           generates (Error error);
+
+    /*
+     * Specifies the portion of the layer that is visible, including portions
+     * under translucent areas of other layers. The region is in screen space,
+     * and will not exceed the dimensions of the screen.
+     *
+     * @param display is the display on which the layer was created.
+     * @param layer is the layer to which the visible region is set.
+     * @param visible is the new visible region, in screen space.
+     * @return error is NONE upon success. Otherwise,
+     *         BAD_DISPLAY when an invalid display handle was passed in.
+     *         BAD_LAYER when an invalid layer handle was passed in.
+     */
+    setLayerVisibleRegion(Display display,
+                          Layer layer,
+                          vec<Rect> visible)
+               generates (Error error);
+
+    /*
+     * Sets the desired Z order (height) of the given layer. A layer with a
+     * greater Z value occludes a layer with a lesser Z value.
+     *
+     * @param display is the display on which the layer was created.
+     * @param layer is the layer to which the Z order is set.
+     * @param z is the new Z order.
+     * @return error is NONE upon success. Otherwise,
+     *         BAD_DISPLAY when an invalid display handle was passed in.
+     *         BAD_LAYER when an invalid layer handle was passed in.
+     */
+    setLayerZOrder(Display display,
+                   Layer layer,
+                   uint32_t z)
+        generates (Error error);
+};
diff --git a/graphics/composer/2.1/IComposerCallback.hal b/graphics/composer/2.1/IComposerCallback.hal
new file mode 100644
index 0000000..a8ca168
--- /dev/null
+++ b/graphics/composer/2.1/IComposerCallback.hal
@@ -0,0 +1,72 @@
+/*
+ * Copyright (C) 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.graphics.composer@2.1;
+
+interface IComposerCallback {
+    enum Connection : int32_t {
+        INVALID = 0,
+
+        /* The display has been connected */
+        CONNECTED = 1,
+        /* The display has been disconnected */
+        DISCONNECTED = 2,
+    };
+
+    /*
+     * Notifies the client that the given display has either been connected or
+     * disconnected. Every active display (even a built-in physical display)
+     * must trigger at least one hotplug notification, even if it only occurs
+     * immediately after callback registration.
+     *
+     * Displays which have been connected are assumed to be in PowerMode::OFF,
+     * and the onVsync callback should not be called for a display until vsync
+     * has been enabled with setVsyncEnabled.
+     *
+     * The client may call back into the device while the callback is in
+     * progress. The device must serialize calls to this callback such that
+     * only one thread is calling it at a time.
+     *
+     * @param display is the display that triggers the hotplug event.
+     * @param connected indicates whether the display is connected or
+     *        disconnected.
+     */
+    onHotplug(Display display, Connection connected);
+
+    /*
+     * Notifies the client to trigger a screen refresh. This forces all layer
+     * state for this display to be resent, and the display to be validated
+     * and presented, even if there have been no changes.
+
+     * This refresh will occur some time after the callback is initiated, but
+     * not necessarily before it returns.  It is safe to trigger this callback
+     * from other functions which call into the device.
+     *
+     * @param display is the display to refresh.
+     */
+    oneway onRefresh(Display display);
+
+    /*
+     * Notifies the client that a vsync event has occurred. This callback must
+     * only be triggered when vsync is enabled for this display (through
+     * setVsyncEnabled).
+     *
+     * @param display is the display which has received a vsync event
+     * @param timestamp is the CLOCK_MONOTONIC time at which the vsync event
+     *        occurred, in nanoseconds.
+     */
+    oneway onVsync(Display display, int64_t timestamp);
+};
diff --git a/graphics/composer/2.1/default/Android.bp b/graphics/composer/2.1/default/Android.bp
new file mode 100644
index 0000000..f91c9a2
--- /dev/null
+++ b/graphics/composer/2.1/default/Android.bp
@@ -0,0 +1,16 @@
+cc_library_shared {
+    name: "android.hardware.graphics.composer@2.1-impl",
+    relative_install_path: "hw",
+    srcs: ["Hwc.cpp"],
+    shared_libs: [
+        "android.hardware.graphics.allocator@2.0",
+        "android.hardware.graphics.composer@2.1",
+        "libbase",
+        "libcutils",
+        "libhardware",
+        "libhidl",
+        "libhwbinder",
+        "liblog",
+        "libutils",
+    ],
+}
diff --git a/graphics/composer/2.1/default/Hwc.cpp b/graphics/composer/2.1/default/Hwc.cpp
new file mode 100644
index 0000000..09c62f0
--- /dev/null
+++ b/graphics/composer/2.1/default/Hwc.cpp
@@ -0,0 +1,1292 @@
+/*
+ * Copyright 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#define LOG_TAG "HwcPassthrough"
+
+#include <mutex>
+#include <type_traits>
+#include <unordered_map>
+#include <unordered_set>
+#include <utility>
+#include <vector>
+
+#include <hardware/gralloc.h>
+#include <hardware/gralloc1.h>
+#include <hardware/hwcomposer2.h>
+#include <log/log.h>
+
+#include "Hwc.h"
+
+namespace android {
+namespace hardware {
+namespace graphics {
+namespace composer {
+namespace V2_1 {
+namespace implementation {
+
+using android::hardware::graphics::allocator::V2_0::PixelFormat;
+
+namespace {
+
+class HandleImporter {
+public:
+    HandleImporter() : mInitialized(false) {}
+
+    bool initialize()
+    {
+        // allow only one client
+        if (mInitialized) {
+            return false;
+        }
+
+        if (!openGralloc()) {
+            return false;
+        }
+
+        mInitialized = true;
+        return true;
+    }
+
+    void cleanup()
+    {
+        if (!mInitialized) {
+            return;
+        }
+
+        closeGralloc();
+        mInitialized = false;
+    }
+
+    // In IComposer, any buffer_handle_t is owned by the caller and we need to
+    // make a clone for hwcomposer2.  We also need to translate empty handle
+    // to nullptr.  This function does that, in-place.
+    bool importBuffer(buffer_handle_t& handle)
+    {
+        if (!handle->numFds && !handle->numInts) {
+            handle = nullptr;
+            return true;
+        }
+
+        buffer_handle_t clone = cloneBuffer(handle);
+        if (!clone) {
+            return false;
+        }
+
+        handle = clone;
+        return true;
+    }
+
+    void freeBuffer(buffer_handle_t handle)
+    {
+        if (!handle) {
+            return;
+        }
+
+        releaseBuffer(handle);
+    }
+
+    bool importFence(const native_handle_t* handle, int& fd)
+    {
+        if (handle->numFds == 0) {
+            fd = -1;
+        } else if (handle->numFds == 1) {
+            fd = dup(handle->data[0]);
+            if (fd < 0) {
+                ALOGE("failed to dup fence fd %d", handle->data[0]);
+                return false;
+            }
+        } else {
+            ALOGE("invalid fence handle with %d file descriptors",
+                    handle->numFds);
+            return false;
+        }
+
+        return true;
+    }
+
+    void closeFence(int fd)
+    {
+        if (fd >= 0) {
+            close(fd);
+        }
+    }
+
+private:
+    bool mInitialized;
+
+    // Some existing gralloc drivers do not support retaining more than once,
+    // when we are in passthrough mode.
+#ifdef BINDERIZED
+    bool openGralloc()
+    {
+        const hw_module_t* module;
+        int err = hw_get_module(GRALLOC_HARDWARE_MODULE_ID, &module);
+        if (err) {
+            ALOGE("failed to get gralloc module");
+            return false;
+        }
+
+        uint8_t major = (module->module_api_version >> 8) & 0xff;
+        if (major > 1) {
+            ALOGE("unknown gralloc module major version %d", major);
+            return false;
+        }
+
+        if (major == 1) {
+            err = gralloc1_open(module, &mDevice);
+            if (err) {
+                ALOGE("failed to open gralloc1 device");
+                return false;
+            }
+
+            mRetain = reinterpret_cast<GRALLOC1_PFN_RETAIN>(
+                    mDevice->getFunction(mDevice, GRALLOC1_FUNCTION_RETAIN));
+            mRelease = reinterpret_cast<GRALLOC1_PFN_RELEASE>(
+                    mDevice->getFunction(mDevice, GRALLOC1_FUNCTION_RELEASE));
+            if (!mRetain || !mRelease) {
+                ALOGE("invalid gralloc1 device");
+                gralloc1_close(mDevice);
+                return false;
+            }
+        } else {
+            mModule = reinterpret_cast<const gralloc_module_t*>(module);
+        }
+
+        return true;
+    }
+
+    void closeGralloc()
+    {
+        if (mDevice) {
+            gralloc1_close(mDevice);
+        }
+    }
+
+    buffer_handle_t cloneBuffer(buffer_handle_t handle)
+    {
+        native_handle_t* clone = native_handle_clone(handle);
+        if (!clone) {
+            ALOGE("failed to clone buffer %p", handle);
+            return nullptr;
+        }
+
+        bool err;
+        if (mDevice) {
+            err = (mRetain(mDevice, clone) != GRALLOC1_ERROR_NONE);
+        } else {
+            err = (mModule->registerBuffer(mModule, clone) != 0);
+        }
+
+        if (err) {
+            ALOGE("failed to retain/register buffer %p", clone);
+            native_handle_close(clone);
+            native_handle_delete(clone);
+            return nullptr;
+        }
+
+        return clone;
+    }
+
+    void releaseBuffer(buffer_handle_t handle)
+    {
+        if (mDevice) {
+            mRelease(mDevice, handle);
+        } else {
+            mModule->unregisterBuffer(mModule, handle);
+            native_handle_close(handle);
+            native_handle_delete(const_cast<native_handle_t*>(handle));
+        }
+    }
+
+    // gralloc1
+    gralloc1_device_t* mDevice;
+    GRALLOC1_PFN_RETAIN mRetain;
+    GRALLOC1_PFN_RELEASE mRelease;
+
+    // gralloc0
+    const gralloc_module_t* mModule;
+#else
+    bool openGralloc() { return true; }
+    void closeGralloc() {}
+    buffer_handle_t cloneBuffer(buffer_handle_t handle) { return handle; }
+    void releaseBuffer(buffer_handle_t) {}
+#endif
+};
+
+HandleImporter sHandleImporter;
+
+class BufferClone {
+public:
+    BufferClone() : mHandle(nullptr) {}
+
+    BufferClone(BufferClone&& other)
+    {
+        mHandle = other.mHandle;
+        other.mHandle = nullptr;
+    }
+
+    BufferClone(const BufferClone& other) = delete;
+    BufferClone& operator=(const BufferClone& other) = delete;
+
+    BufferClone& operator=(buffer_handle_t handle)
+    {
+        clear();
+        mHandle = handle;
+        return *this;
+    }
+
+    ~BufferClone()
+    {
+        clear();
+    }
+
+private:
+    void clear()
+    {
+        if (mHandle) {
+            sHandleImporter.freeBuffer(mHandle);
+        }
+    }
+
+    buffer_handle_t mHandle;
+};
+
+} // anonymous namespace
+
+class HwcHal : public IComposer {
+public:
+    HwcHal(const hw_module_t* module);
+    virtual ~HwcHal();
+
+    // IComposer interface
+    Return<void> getCapabilities(getCapabilities_cb hidl_cb) override;
+    Return<void> dumpDebugInfo(dumpDebugInfo_cb hidl_cb) override;
+    Return<void> registerCallback(const sp<IComposerCallback>& callback) override;
+    Return<uint32_t> getMaxVirtualDisplayCount() override;
+    Return<void> createVirtualDisplay(uint32_t width, uint32_t height,
+            PixelFormat formatHint, createVirtualDisplay_cb hidl_cb) override;
+    Return<Error> destroyVirtualDisplay(Display display) override;
+    Return<Error> acceptDisplayChanges(Display display) override;
+    Return<void> createLayer(Display display,
+            createLayer_cb hidl_cb) override;
+    Return<Error> destroyLayer(Display display, Layer layer) override;
+    Return<void> getActiveConfig(Display display,
+            getActiveConfig_cb hidl_cb) override;
+    Return<void> getChangedCompositionTypes(Display display,
+            getChangedCompositionTypes_cb hidl_cb) override;
+    Return<Error> getClientTargetSupport(Display display,
+            uint32_t width, uint32_t height,
+            PixelFormat format, Dataspace dataspace) override;
+    Return<void> getColorModes(Display display,
+            getColorModes_cb hidl_cb) override;
+    Return<void> getDisplayAttribute(Display display,
+            Config config, Attribute attribute,
+            getDisplayAttribute_cb hidl_cb) override;
+    Return<void> getDisplayConfigs(Display display,
+            getDisplayConfigs_cb hidl_cb) override;
+    Return<void> getDisplayName(Display display,
+            getDisplayName_cb hidl_cb) override;
+    Return<void> getDisplayRequests(Display display,
+            getDisplayRequests_cb hidl_cb) override;
+    Return<void> getDisplayType(Display display,
+            getDisplayType_cb hidl_cb) override;
+    Return<void> getDozeSupport(Display display,
+            getDozeSupport_cb hidl_cb) override;
+    Return<void> getHdrCapabilities(Display display,
+            getHdrCapabilities_cb hidl_cb) override;
+    Return<void> getReleaseFences(Display display,
+            getReleaseFences_cb hidl_cb) override;
+    Return<void> presentDisplay(Display display,
+            presentDisplay_cb hidl_cb) override;
+    Return<Error> setActiveConfig(Display display, Config config) override;
+    Return<Error> setClientTarget(Display display,
+            const native_handle_t* target,
+            const native_handle_t* acquireFence,
+            Dataspace dataspace, const hidl_vec<Rect>& damage) override;
+    Return<Error> setColorMode(Display display, ColorMode mode) override;
+    Return<Error> setColorTransform(Display display,
+            const hidl_vec<float>& matrix, ColorTransform hint) override;
+    Return<Error> setOutputBuffer(Display display,
+            const native_handle_t* buffer,
+            const native_handle_t* releaseFence) override;
+    Return<Error> setPowerMode(Display display, PowerMode mode) override;
+    Return<Error> setVsyncEnabled(Display display, Vsync enabled) override;
+    Return<void> validateDisplay(Display display,
+            validateDisplay_cb hidl_cb) override;
+    Return<Error> setCursorPosition(Display display,
+            Layer layer, int32_t x, int32_t y) override;
+    Return<Error> setLayerBuffer(Display display,
+            Layer layer, const native_handle_t* buffer,
+            const native_handle_t* acquireFence) override;
+    Return<Error> setLayerSurfaceDamage(Display display,
+            Layer layer, const hidl_vec<Rect>& damage) override;
+    Return<Error> setLayerBlendMode(Display display,
+            Layer layer, BlendMode mode) override;
+    Return<Error> setLayerColor(Display display,
+            Layer layer, const Color& color) override;
+    Return<Error> setLayerCompositionType(Display display,
+            Layer layer, Composition type) override;
+    Return<Error> setLayerDataspace(Display display,
+            Layer layer, Dataspace dataspace) override;
+    Return<Error> setLayerDisplayFrame(Display display,
+            Layer layer, const Rect& frame) override;
+    Return<Error> setLayerPlaneAlpha(Display display,
+            Layer layer, float alpha) override;
+    Return<Error> setLayerSidebandStream(Display display,
+            Layer layer, const native_handle_t* stream) override;
+    Return<Error> setLayerSourceCrop(Display display,
+            Layer layer, const FRect& crop) override;
+    Return<Error> setLayerTransform(Display display,
+            Layer layer, Transform transform) override;
+    Return<Error> setLayerVisibleRegion(Display display,
+            Layer layer, const hidl_vec<Rect>& visible) override;
+    Return<Error> setLayerZOrder(Display display,
+            Layer layer, uint32_t z) override;
+
+private:
+    void initCapabilities();
+
+    template<typename T>
+    void initDispatch(T& func, hwc2_function_descriptor_t desc);
+    void initDispatch();
+
+    bool hasCapability(Capability capability) const;
+
+    static void hotplugHook(hwc2_callback_data_t callbackData,
+        hwc2_display_t display, int32_t connected);
+    static void refreshHook(hwc2_callback_data_t callbackData,
+        hwc2_display_t display);
+    static void vsyncHook(hwc2_callback_data_t callbackData,
+        hwc2_display_t display, int64_t timestamp);
+
+    hwc2_device_t* mDevice;
+
+    std::unordered_set<Capability> mCapabilities;
+
+    struct {
+        HWC2_PFN_ACCEPT_DISPLAY_CHANGES acceptDisplayChanges;
+        HWC2_PFN_CREATE_LAYER createLayer;
+        HWC2_PFN_CREATE_VIRTUAL_DISPLAY createVirtualDisplay;
+        HWC2_PFN_DESTROY_LAYER destroyLayer;
+        HWC2_PFN_DESTROY_VIRTUAL_DISPLAY destroyVirtualDisplay;
+        HWC2_PFN_DUMP dump;
+        HWC2_PFN_GET_ACTIVE_CONFIG getActiveConfig;
+        HWC2_PFN_GET_CHANGED_COMPOSITION_TYPES getChangedCompositionTypes;
+        HWC2_PFN_GET_CLIENT_TARGET_SUPPORT getClientTargetSupport;
+        HWC2_PFN_GET_COLOR_MODES getColorModes;
+        HWC2_PFN_GET_DISPLAY_ATTRIBUTE getDisplayAttribute;
+        HWC2_PFN_GET_DISPLAY_CONFIGS getDisplayConfigs;
+        HWC2_PFN_GET_DISPLAY_NAME getDisplayName;
+        HWC2_PFN_GET_DISPLAY_REQUESTS getDisplayRequests;
+        HWC2_PFN_GET_DISPLAY_TYPE getDisplayType;
+        HWC2_PFN_GET_DOZE_SUPPORT getDozeSupport;
+        HWC2_PFN_GET_HDR_CAPABILITIES getHdrCapabilities;
+        HWC2_PFN_GET_MAX_VIRTUAL_DISPLAY_COUNT getMaxVirtualDisplayCount;
+        HWC2_PFN_GET_RELEASE_FENCES getReleaseFences;
+        HWC2_PFN_PRESENT_DISPLAY presentDisplay;
+        HWC2_PFN_REGISTER_CALLBACK registerCallback;
+        HWC2_PFN_SET_ACTIVE_CONFIG setActiveConfig;
+        HWC2_PFN_SET_CLIENT_TARGET setClientTarget;
+        HWC2_PFN_SET_COLOR_MODE setColorMode;
+        HWC2_PFN_SET_COLOR_TRANSFORM setColorTransform;
+        HWC2_PFN_SET_CURSOR_POSITION setCursorPosition;
+        HWC2_PFN_SET_LAYER_BLEND_MODE setLayerBlendMode;
+        HWC2_PFN_SET_LAYER_BUFFER setLayerBuffer;
+        HWC2_PFN_SET_LAYER_COLOR setLayerColor;
+        HWC2_PFN_SET_LAYER_COMPOSITION_TYPE setLayerCompositionType;
+        HWC2_PFN_SET_LAYER_DATASPACE setLayerDataspace;
+        HWC2_PFN_SET_LAYER_DISPLAY_FRAME setLayerDisplayFrame;
+        HWC2_PFN_SET_LAYER_PLANE_ALPHA setLayerPlaneAlpha;
+        HWC2_PFN_SET_LAYER_SIDEBAND_STREAM setLayerSidebandStream;
+        HWC2_PFN_SET_LAYER_SOURCE_CROP setLayerSourceCrop;
+        HWC2_PFN_SET_LAYER_SURFACE_DAMAGE setLayerSurfaceDamage;
+        HWC2_PFN_SET_LAYER_TRANSFORM setLayerTransform;
+        HWC2_PFN_SET_LAYER_VISIBLE_REGION setLayerVisibleRegion;
+        HWC2_PFN_SET_LAYER_Z_ORDER setLayerZOrder;
+        HWC2_PFN_SET_OUTPUT_BUFFER setOutputBuffer;
+        HWC2_PFN_SET_POWER_MODE setPowerMode;
+        HWC2_PFN_SET_VSYNC_ENABLED setVsyncEnabled;
+        HWC2_PFN_VALIDATE_DISPLAY validateDisplay;
+    } mDispatch;
+
+    // cloned buffers for a display
+    struct DisplayBuffers {
+        BufferClone ClientTarget;
+        BufferClone OutputBuffer;
+
+        std::unordered_map<Layer, BufferClone> LayerBuffers;
+        std::unordered_map<Layer, BufferClone> LayerSidebandStreams;
+    };
+
+    std::mutex mCallbackMutex;
+    sp<IComposerCallback> mCallback;
+
+    std::mutex mDisplayMutex;
+    std::unordered_map<Display, DisplayBuffers> mDisplays;
+};
+
+HwcHal::HwcHal(const hw_module_t* module)
+    : mDevice(nullptr), mDispatch()
+{
+    if (!sHandleImporter.initialize()) {
+        LOG_ALWAYS_FATAL("failed to initialize handle importer");
+    }
+
+    int status = hwc2_open(module, &mDevice);
+    if (status) {
+        LOG_ALWAYS_FATAL("failed to open hwcomposer2 device: %s",
+                strerror(-status));
+    }
+
+    initCapabilities();
+    initDispatch();
+}
+
+HwcHal::~HwcHal()
+{
+    hwc2_close(mDevice);
+    mDisplays.clear();
+    sHandleImporter.cleanup();
+}
+
+void HwcHal::initCapabilities()
+{
+    uint32_t count = 0;
+    mDevice->getCapabilities(mDevice, &count, nullptr);
+
+    std::vector<Capability> caps(count);
+    mDevice->getCapabilities(mDevice, &count, reinterpret_cast<
+              std::underlying_type<Capability>::type*>(caps.data()));
+    caps.resize(count);
+
+    mCapabilities.insert(caps.cbegin(), caps.cend());
+}
+
+template<typename T>
+void HwcHal::initDispatch(T& func, hwc2_function_descriptor_t desc)
+{
+    auto pfn = mDevice->getFunction(mDevice, desc);
+    if (!pfn) {
+        LOG_ALWAYS_FATAL("failed to get hwcomposer2 function %d", desc);
+    }
+
+    func = reinterpret_cast<T>(pfn);
+}
+
+void HwcHal::initDispatch()
+{
+    initDispatch(mDispatch.acceptDisplayChanges,
+            HWC2_FUNCTION_ACCEPT_DISPLAY_CHANGES);
+    initDispatch(mDispatch.createLayer, HWC2_FUNCTION_CREATE_LAYER);
+    initDispatch(mDispatch.createVirtualDisplay,
+            HWC2_FUNCTION_CREATE_VIRTUAL_DISPLAY);
+    initDispatch(mDispatch.destroyLayer, HWC2_FUNCTION_DESTROY_LAYER);
+    initDispatch(mDispatch.destroyVirtualDisplay,
+            HWC2_FUNCTION_DESTROY_VIRTUAL_DISPLAY);
+    initDispatch(mDispatch.dump, HWC2_FUNCTION_DUMP);
+    initDispatch(mDispatch.getActiveConfig, HWC2_FUNCTION_GET_ACTIVE_CONFIG);
+    initDispatch(mDispatch.getChangedCompositionTypes,
+            HWC2_FUNCTION_GET_CHANGED_COMPOSITION_TYPES);
+    initDispatch(mDispatch.getClientTargetSupport,
+            HWC2_FUNCTION_GET_CLIENT_TARGET_SUPPORT);
+    initDispatch(mDispatch.getColorModes, HWC2_FUNCTION_GET_COLOR_MODES);
+    initDispatch(mDispatch.getDisplayAttribute,
+            HWC2_FUNCTION_GET_DISPLAY_ATTRIBUTE);
+    initDispatch(mDispatch.getDisplayConfigs,
+            HWC2_FUNCTION_GET_DISPLAY_CONFIGS);
+    initDispatch(mDispatch.getDisplayName, HWC2_FUNCTION_GET_DISPLAY_NAME);
+    initDispatch(mDispatch.getDisplayRequests,
+            HWC2_FUNCTION_GET_DISPLAY_REQUESTS);
+    initDispatch(mDispatch.getDisplayType, HWC2_FUNCTION_GET_DISPLAY_TYPE);
+    initDispatch(mDispatch.getDozeSupport, HWC2_FUNCTION_GET_DOZE_SUPPORT);
+    initDispatch(mDispatch.getHdrCapabilities,
+            HWC2_FUNCTION_GET_HDR_CAPABILITIES);
+    initDispatch(mDispatch.getMaxVirtualDisplayCount,
+            HWC2_FUNCTION_GET_MAX_VIRTUAL_DISPLAY_COUNT);
+    initDispatch(mDispatch.getReleaseFences,
+            HWC2_FUNCTION_GET_RELEASE_FENCES);
+    initDispatch(mDispatch.presentDisplay, HWC2_FUNCTION_PRESENT_DISPLAY);
+    initDispatch(mDispatch.registerCallback, HWC2_FUNCTION_REGISTER_CALLBACK);
+    initDispatch(mDispatch.setActiveConfig, HWC2_FUNCTION_SET_ACTIVE_CONFIG);
+    initDispatch(mDispatch.setClientTarget, HWC2_FUNCTION_SET_CLIENT_TARGET);
+    initDispatch(mDispatch.setColorMode, HWC2_FUNCTION_SET_COLOR_MODE);
+    initDispatch(mDispatch.setColorTransform,
+            HWC2_FUNCTION_SET_COLOR_TRANSFORM);
+    initDispatch(mDispatch.setCursorPosition,
+            HWC2_FUNCTION_SET_CURSOR_POSITION);
+    initDispatch(mDispatch.setLayerBlendMode,
+            HWC2_FUNCTION_SET_LAYER_BLEND_MODE);
+    initDispatch(mDispatch.setLayerBuffer, HWC2_FUNCTION_SET_LAYER_BUFFER);
+    initDispatch(mDispatch.setLayerColor, HWC2_FUNCTION_SET_LAYER_COLOR);
+    initDispatch(mDispatch.setLayerCompositionType,
+            HWC2_FUNCTION_SET_LAYER_COMPOSITION_TYPE);
+    initDispatch(mDispatch.setLayerDataspace,
+            HWC2_FUNCTION_SET_LAYER_DATASPACE);
+    initDispatch(mDispatch.setLayerDisplayFrame,
+            HWC2_FUNCTION_SET_LAYER_DISPLAY_FRAME);
+    initDispatch(mDispatch.setLayerPlaneAlpha,
+            HWC2_FUNCTION_SET_LAYER_PLANE_ALPHA);
+
+    if (hasCapability(Capability::SIDEBAND_STREAM)) {
+        initDispatch(mDispatch.setLayerSidebandStream,
+                HWC2_FUNCTION_SET_LAYER_SIDEBAND_STREAM);
+    }
+
+    initDispatch(mDispatch.setLayerSourceCrop,
+            HWC2_FUNCTION_SET_LAYER_SOURCE_CROP);
+    initDispatch(mDispatch.setLayerSurfaceDamage,
+            HWC2_FUNCTION_SET_LAYER_SURFACE_DAMAGE);
+    initDispatch(mDispatch.setLayerTransform,
+            HWC2_FUNCTION_SET_LAYER_TRANSFORM);
+    initDispatch(mDispatch.setLayerVisibleRegion,
+            HWC2_FUNCTION_SET_LAYER_VISIBLE_REGION);
+    initDispatch(mDispatch.setLayerZOrder, HWC2_FUNCTION_SET_LAYER_Z_ORDER);
+    initDispatch(mDispatch.setOutputBuffer, HWC2_FUNCTION_SET_OUTPUT_BUFFER);
+    initDispatch(mDispatch.setPowerMode, HWC2_FUNCTION_SET_POWER_MODE);
+    initDispatch(mDispatch.setVsyncEnabled, HWC2_FUNCTION_SET_VSYNC_ENABLED);
+    initDispatch(mDispatch.validateDisplay, HWC2_FUNCTION_VALIDATE_DISPLAY);
+}
+
+bool HwcHal::hasCapability(Capability capability) const
+{
+    return (mCapabilities.count(capability) > 0);
+}
+
+Return<void> HwcHal::getCapabilities(getCapabilities_cb hidl_cb)
+{
+    std::vector<Capability> caps(
+            mCapabilities.cbegin(), mCapabilities.cend());
+
+    hidl_vec<Capability> caps_reply;
+    caps_reply.setToExternal(caps.data(), caps.size());
+    hidl_cb(caps_reply);
+
+    return Void();
+}
+
+Return<void> HwcHal::dumpDebugInfo(dumpDebugInfo_cb hidl_cb)
+{
+    uint32_t len;
+    mDispatch.dump(mDevice, &len, nullptr);
+
+    std::vector<char> buf(len + 1);
+    mDispatch.dump(mDevice, &len, buf.data());
+    buf.resize(len + 1);
+    buf[len] = '\0';
+
+    hidl_string buf_reply;
+    buf_reply.setToExternal(buf.data(), len);
+    hidl_cb(buf_reply);
+
+    return Void();
+}
+
+void HwcHal::hotplugHook(hwc2_callback_data_t callbackData,
+        hwc2_display_t display, int32_t connected)
+{
+    auto hal = reinterpret_cast<HwcHal*>(callbackData);
+
+    {
+        std::lock_guard<std::mutex> lock(hal->mDisplayMutex);
+
+        if (connected == HWC2_CONNECTION_CONNECTED) {
+            hal->mDisplays.emplace(display, DisplayBuffers());
+        } else if (connected == HWC2_CONNECTION_DISCONNECTED) {
+            hal->mDisplays.erase(display);
+        }
+    }
+
+    hal->mCallback->onHotplug(display,
+            static_cast<IComposerCallback::Connection>(connected));
+}
+
+void HwcHal::refreshHook(hwc2_callback_data_t callbackData,
+        hwc2_display_t display)
+{
+    auto hal = reinterpret_cast<HwcHal*>(callbackData);
+    hal->mCallback->onRefresh(display);
+}
+
+void HwcHal::vsyncHook(hwc2_callback_data_t callbackData,
+        hwc2_display_t display, int64_t timestamp)
+{
+    auto hal = reinterpret_cast<HwcHal*>(callbackData);
+    hal->mCallback->onVsync(display, timestamp);
+}
+
+Return<void> HwcHal::registerCallback(const sp<IComposerCallback>& callback)
+{
+    std::lock_guard<std::mutex> lock(mCallbackMutex);
+
+    mCallback = callback;
+
+    mDispatch.registerCallback(mDevice, HWC2_CALLBACK_HOTPLUG, this,
+            reinterpret_cast<hwc2_function_pointer_t>(hotplugHook));
+    mDispatch.registerCallback(mDevice, HWC2_CALLBACK_REFRESH, this,
+            reinterpret_cast<hwc2_function_pointer_t>(refreshHook));
+    mDispatch.registerCallback(mDevice, HWC2_CALLBACK_VSYNC, this,
+            reinterpret_cast<hwc2_function_pointer_t>(vsyncHook));
+
+    return Void();
+}
+
+Return<uint32_t> HwcHal::getMaxVirtualDisplayCount()
+{
+    return mDispatch.getMaxVirtualDisplayCount(mDevice);
+}
+
+Return<void> HwcHal::createVirtualDisplay(uint32_t width, uint32_t height,
+        PixelFormat formatHint, createVirtualDisplay_cb hidl_cb)
+{
+    int32_t format = static_cast<int32_t>(formatHint);
+    hwc2_display_t display;
+    auto error = mDispatch.createVirtualDisplay(mDevice, width, height,
+            &format, &display);
+    if (error == HWC2_ERROR_NONE) {
+        std::lock_guard<std::mutex> lock(mDisplayMutex);
+
+        mDisplays.emplace(display, DisplayBuffers());
+    }
+
+    hidl_cb(static_cast<Error>(error), display,
+            static_cast<PixelFormat>(format));
+
+    return Void();
+}
+
+Return<Error> HwcHal::destroyVirtualDisplay(Display display)
+{
+    auto error = mDispatch.destroyVirtualDisplay(mDevice, display);
+    if (error == HWC2_ERROR_NONE) {
+        std::lock_guard<std::mutex> lock(mDisplayMutex);
+
+        mDisplays.erase(display);
+    }
+
+    return static_cast<Error>(error);
+}
+
+Return<Error> HwcHal::acceptDisplayChanges(Display display)
+{
+    auto error = mDispatch.acceptDisplayChanges(mDevice, display);
+    return static_cast<Error>(error);
+}
+
+Return<void> HwcHal::createLayer(Display display, createLayer_cb hidl_cb)
+{
+    hwc2_layer_t layer;
+    auto error = mDispatch.createLayer(mDevice, display, &layer);
+
+    hidl_cb(static_cast<Error>(error), layer);
+
+    return Void();
+}
+
+Return<Error> HwcHal::destroyLayer(Display display, Layer layer)
+{
+    auto error = mDispatch.destroyLayer(mDevice, display, layer);
+    return static_cast<Error>(error);
+}
+
+Return<void> HwcHal::getActiveConfig(Display display,
+        getActiveConfig_cb hidl_cb)
+{
+    hwc2_config_t config;
+    auto error = mDispatch.getActiveConfig(mDevice, display, &config);
+
+    hidl_cb(static_cast<Error>(error), config);
+
+    return Void();
+}
+
+Return<void> HwcHal::getChangedCompositionTypes(Display display,
+        getChangedCompositionTypes_cb hidl_cb)
+{
+    uint32_t count = 0;
+    auto error = mDispatch.getChangedCompositionTypes(mDevice, display,
+            &count, nullptr, nullptr);
+    if (error != HWC2_ERROR_NONE) {
+        count = 0;
+    }
+
+    std::vector<hwc2_layer_t> layers(count);
+    std::vector<Composition> types(count);
+    error = mDispatch.getChangedCompositionTypes(mDevice, display,
+            &count, layers.data(),
+            reinterpret_cast<std::underlying_type<Composition>::type*>(
+                types.data()));
+    if (error != HWC2_ERROR_NONE) {
+        count = 0;
+    }
+    layers.resize(count);
+    types.resize(count);
+
+    hidl_vec<Layer> layers_reply;
+    layers_reply.setToExternal(layers.data(), layers.size());
+
+    hidl_vec<Composition> types_reply;
+    types_reply.setToExternal(types.data(), types.size());
+
+    hidl_cb(static_cast<Error>(error), layers_reply, types_reply);
+
+    return Void();
+}
+
+Return<Error> HwcHal::getClientTargetSupport(Display display,
+        uint32_t width, uint32_t height,
+        PixelFormat format, Dataspace dataspace)
+{
+    auto error = mDispatch.getClientTargetSupport(mDevice, display,
+            width, height, static_cast<int32_t>(format),
+            static_cast<int32_t>(dataspace));
+    return static_cast<Error>(error);
+}
+
+Return<void> HwcHal::getColorModes(Display display, getColorModes_cb hidl_cb)
+{
+    uint32_t count = 0;
+    auto error = mDispatch.getColorModes(mDevice, display, &count, nullptr);
+    if (error != HWC2_ERROR_NONE) {
+        count = 0;
+    }
+
+    std::vector<ColorMode> modes(count);
+    error = mDispatch.getColorModes(mDevice, display, &count,
+            reinterpret_cast<std::underlying_type<ColorMode>::type*>(
+                modes.data()));
+    if (error != HWC2_ERROR_NONE) {
+        count = 0;
+    }
+    modes.resize(count);
+
+    hidl_vec<ColorMode> modes_reply;
+    modes_reply.setToExternal(modes.data(), modes.size());
+    hidl_cb(static_cast<Error>(error), modes_reply);
+
+    return Void();
+}
+
+Return<void> HwcHal::getDisplayAttribute(Display display,
+        Config config, Attribute attribute,
+        getDisplayAttribute_cb hidl_cb)
+{
+    int32_t value;
+    auto error = mDispatch.getDisplayAttribute(mDevice, display, config,
+            static_cast<int32_t>(attribute), &value);
+
+    hidl_cb(static_cast<Error>(error), value);
+
+    return Void();
+}
+
+Return<void> HwcHal::getDisplayConfigs(Display display,
+        getDisplayConfigs_cb hidl_cb)
+{
+    uint32_t count = 0;
+    auto error = mDispatch.getDisplayConfigs(mDevice, display,
+            &count, nullptr);
+    if (error != HWC2_ERROR_NONE) {
+        count = 0;
+    }
+
+    std::vector<hwc2_config_t> configs(count);
+    error = mDispatch.getDisplayConfigs(mDevice, display,
+            &count, configs.data());
+    if (error != HWC2_ERROR_NONE) {
+        count = 0;
+    }
+    configs.resize(count);
+
+    hidl_vec<Config> configs_reply;
+    configs_reply.setToExternal(configs.data(), configs.size());
+    hidl_cb(static_cast<Error>(error), configs_reply);
+
+    return Void();
+}
+
+Return<void> HwcHal::getDisplayName(Display display,
+        getDisplayName_cb hidl_cb)
+{
+    uint32_t count = 0;
+    auto error = mDispatch.getDisplayName(mDevice, display, &count, nullptr);
+    if (error != HWC2_ERROR_NONE) {
+        count = 0;
+    }
+
+    std::vector<char> name(count + 1);
+    error = mDispatch.getDisplayName(mDevice, display, &count, name.data());
+    if (error != HWC2_ERROR_NONE) {
+        count = 0;
+    }
+    name.resize(count + 1);
+    name[count] = '\0';
+
+    hidl_string name_reply;
+    name_reply.setToExternal(name.data(), count);
+    hidl_cb(static_cast<Error>(error), name_reply);
+
+    return Void();
+}
+
+Return<void> HwcHal::getDisplayRequests(Display display,
+        getDisplayRequests_cb hidl_cb)
+{
+    int32_t display_reqs;
+    uint32_t count = 0;
+    auto error = mDispatch.getDisplayRequests(mDevice, display,
+            &display_reqs, &count, nullptr, nullptr);
+    if (error != HWC2_ERROR_NONE) {
+        count = 0;
+    }
+
+    std::vector<hwc2_layer_t> layers(count);
+    std::vector<int32_t> layer_reqs(count);
+    error = mDispatch.getDisplayRequests(mDevice, display,
+            &display_reqs, &count, layers.data(), layer_reqs.data());
+    if (error != HWC2_ERROR_NONE) {
+        count = 0;
+    }
+    layers.resize(count);
+    layer_reqs.resize(count);
+
+    hidl_vec<Layer> layers_reply;
+    layers_reply.setToExternal(layers.data(), layers.size());
+
+    hidl_vec<uint32_t> layer_reqs_reply;
+    layer_reqs_reply.setToExternal(
+            reinterpret_cast<uint32_t*>(layer_reqs.data()),
+            layer_reqs.size());
+
+    hidl_cb(static_cast<Error>(error), display_reqs,
+            layers_reply, layer_reqs_reply);
+
+    return Void();
+}
+
+Return<void> HwcHal::getDisplayType(Display display,
+        getDisplayType_cb hidl_cb)
+{
+    int32_t type;
+    auto error = mDispatch.getDisplayType(mDevice, display, &type);
+
+    hidl_cb(static_cast<Error>(error), static_cast<DisplayType>(type));
+
+    return Void();
+}
+
+Return<void> HwcHal::getDozeSupport(Display display,
+        getDozeSupport_cb hidl_cb)
+{
+    int32_t support;
+    auto error = mDispatch.getDozeSupport(mDevice, display, &support);
+
+    hidl_cb(static_cast<Error>(error), support);
+
+    return Void();
+}
+
+Return<void> HwcHal::getHdrCapabilities(Display display,
+        getHdrCapabilities_cb hidl_cb)
+{
+    float max_lumi, max_avg_lumi, min_lumi;
+    uint32_t count = 0;
+    auto error = mDispatch.getHdrCapabilities(mDevice, display,
+            &count, nullptr, &max_lumi, &max_avg_lumi, &min_lumi);
+    if (error != HWC2_ERROR_NONE) {
+        count = 0;
+    }
+
+    std::vector<Hdr> types(count);
+    error = mDispatch.getHdrCapabilities(mDevice, display, &count,
+            reinterpret_cast<std::underlying_type<Hdr>::type*>(types.data()),
+            &max_lumi, &max_avg_lumi, &min_lumi);
+    if (error != HWC2_ERROR_NONE) {
+        count = 0;
+    }
+    types.resize(count);
+
+    hidl_vec<Hdr> types_reply;
+    types_reply.setToExternal(types.data(), types.size());
+    hidl_cb(static_cast<Error>(error), types_reply,
+            max_lumi, max_avg_lumi, min_lumi);
+
+    return Void();
+}
+
+Return<void> HwcHal::getReleaseFences(Display display,
+        getReleaseFences_cb hidl_cb)
+{
+    uint32_t count = 0;
+    auto error = mDispatch.getReleaseFences(mDevice, display,
+            &count, nullptr, nullptr);
+    if (error != HWC2_ERROR_NONE) {
+        count = 0;
+    }
+
+    std::vector<hwc2_layer_t> layers(count);
+    std::vector<int32_t> fences(count);
+    error = mDispatch.getReleaseFences(mDevice, display,
+            &count, layers.data(), fences.data());
+    if (error != HWC2_ERROR_NONE) {
+        count = 0;
+    }
+    layers.resize(count);
+    fences.resize(count);
+
+    // filter out layers with release fence -1
+    std::vector<hwc2_layer_t> filtered_layers;
+    std::vector<int> filtered_fences;
+    for (size_t i = 0; i < layers.size(); i++) {
+        if (fences[i] >= 0) {
+            filtered_layers.push_back(layers[i]);
+            filtered_fences.push_back(fences[i]);
+        }
+    }
+
+    hidl_vec<Layer> layers_reply;
+    native_handle_t* fences_reply =
+        native_handle_create(filtered_fences.size(), 0);
+    if (fences_reply) {
+        layers_reply.setToExternal(filtered_layers.data(),
+                filtered_layers.size());
+        memcpy(fences_reply->data, filtered_fences.data(),
+                sizeof(int) * filtered_fences.size());
+
+        hidl_cb(static_cast<Error>(error), layers_reply, fences_reply);
+
+        native_handle_close(fences_reply);
+        native_handle_delete(fences_reply);
+    } else {
+        NATIVE_HANDLE_DECLARE_STORAGE(fences_storage, 0, 0);
+        fences_reply = native_handle_init(fences_storage, 0, 0);
+
+        hidl_cb(Error::NO_RESOURCES, layers_reply, fences_reply);
+
+        for (auto fence : filtered_fences) {
+            close(fence);
+        }
+    }
+
+    return Void();
+}
+
+Return<void> HwcHal::presentDisplay(Display display,
+        presentDisplay_cb hidl_cb)
+{
+    int32_t fence = -1;
+    auto error = mDispatch.presentDisplay(mDevice, display, &fence);
+
+    NATIVE_HANDLE_DECLARE_STORAGE(fence_storage, 1, 0);
+    native_handle_t* fence_reply;
+    if (fence >= 0) {
+        fence_reply = native_handle_init(fence_storage, 1, 0);
+        fence_reply->data[0] = fence;
+    } else {
+        fence_reply = native_handle_init(fence_storage, 0, 0);
+    }
+
+    hidl_cb(static_cast<Error>(error), fence_reply);
+
+    if (fence >= 0) {
+        close(fence);
+    }
+
+    return Void();
+}
+
+Return<Error> HwcHal::setActiveConfig(Display display, Config config)
+{
+    auto error = mDispatch.setActiveConfig(mDevice, display, config);
+    return static_cast<Error>(error);
+}
+
+Return<Error> HwcHal::setClientTarget(Display display,
+        const native_handle_t* target,
+        const native_handle_t* acquireFence,
+        Dataspace dataspace, const hidl_vec<Rect>& damage)
+{
+    if (!sHandleImporter.importBuffer(target)) {
+        return Error::NO_RESOURCES;
+    }
+
+    int32_t fence;
+    if (!sHandleImporter.importFence(acquireFence, fence)) {
+        sHandleImporter.freeBuffer(target);
+        return Error::NO_RESOURCES;
+    }
+
+    hwc_region_t damage_region = { damage.size(),
+        reinterpret_cast<const hwc_rect_t*>(&damage[0]) };
+
+    int32_t error = mDispatch.setClientTarget(mDevice, display,
+            target, fence, static_cast<int32_t>(dataspace),
+            damage_region);
+    if (error == HWC2_ERROR_NONE) {
+        std::lock_guard<std::mutex> lock(mDisplayMutex);
+
+        auto dpy = mDisplays.find(display);
+        dpy->second.ClientTarget = target;
+    } else {
+        sHandleImporter.freeBuffer(target);
+        sHandleImporter.closeFence(fence);
+    }
+
+    return static_cast<Error>(error);
+}
+
+Return<Error> HwcHal::setColorMode(Display display, ColorMode mode)
+{
+    auto error = mDispatch.setColorMode(mDevice, display,
+            static_cast<int32_t>(mode));
+    return static_cast<Error>(error);
+}
+
+Return<Error> HwcHal::setColorTransform(Display display,
+        const hidl_vec<float>& matrix, ColorTransform hint)
+{
+    auto error = mDispatch.setColorTransform(mDevice, display,
+            &matrix[0], static_cast<int32_t>(hint));
+    return static_cast<Error>(error);
+}
+
+Return<Error> HwcHal::setOutputBuffer(Display display,
+        const native_handle_t* buffer,
+        const native_handle_t* releaseFence)
+{
+    if (!sHandleImporter.importBuffer(buffer)) {
+        return Error::NO_RESOURCES;
+    }
+
+    int32_t fence;
+    if (!sHandleImporter.importFence(releaseFence, fence)) {
+        sHandleImporter.freeBuffer(buffer);
+        return Error::NO_RESOURCES;
+    }
+
+    int32_t error = mDispatch.setOutputBuffer(mDevice,
+            display, buffer, fence);
+    if (error == HWC2_ERROR_NONE) {
+        std::lock_guard<std::mutex> lock(mDisplayMutex);
+
+        auto dpy = mDisplays.find(display);
+        dpy->second.OutputBuffer = buffer;
+    } else {
+        sHandleImporter.freeBuffer(buffer);
+    }
+
+    // unlike in setClientTarget, fence is owned by us and is always closed
+    sHandleImporter.closeFence(fence);
+
+    return static_cast<Error>(error);
+}
+
+Return<Error> HwcHal::setPowerMode(Display display, PowerMode mode)
+{
+    auto error = mDispatch.setPowerMode(mDevice, display,
+            static_cast<int32_t>(mode));
+    return static_cast<Error>(error);
+}
+
+Return<Error> HwcHal::setVsyncEnabled(Display display,
+        Vsync enabled)
+{
+    auto error = mDispatch.setVsyncEnabled(mDevice, display,
+            static_cast<int32_t>(enabled));
+    return static_cast<Error>(error);
+}
+
+Return<void> HwcHal::validateDisplay(Display display,
+        validateDisplay_cb hidl_cb)
+{
+    uint32_t types_count = 0;
+    uint32_t reqs_count = 0;
+    auto error = mDispatch.validateDisplay(mDevice, display,
+            &types_count, &reqs_count);
+
+    hidl_cb(static_cast<Error>(error), types_count, reqs_count);
+
+    return Void();
+}
+
+Return<Error> HwcHal::setCursorPosition(Display display,
+        Layer layer, int32_t x, int32_t y)
+{
+    auto error = mDispatch.setCursorPosition(mDevice, display, layer, x, y);
+    return static_cast<Error>(error);
+}
+
+Return<Error> HwcHal::setLayerBuffer(Display display,
+        Layer layer, const native_handle_t* buffer,
+        const native_handle_t* acquireFence)
+{
+    if (!sHandleImporter.importBuffer(buffer)) {
+        return Error::NO_RESOURCES;
+    }
+
+    int32_t fence;
+    if (!sHandleImporter.importFence(acquireFence, fence)) {
+        sHandleImporter.freeBuffer(buffer);
+        return Error::NO_RESOURCES;
+    }
+
+    int32_t error = mDispatch.setLayerBuffer(mDevice,
+            display, layer, buffer, fence);
+    if (error == HWC2_ERROR_NONE) {
+        std::lock_guard<std::mutex> lock(mDisplayMutex);
+
+        auto dpy = mDisplays.find(display);
+        dpy->second.LayerBuffers[layer] = buffer;
+    } else {
+        sHandleImporter.freeBuffer(buffer);
+        sHandleImporter.closeFence(fence);
+    }
+
+    return static_cast<Error>(error);
+}
+
+Return<Error> HwcHal::setLayerSurfaceDamage(Display display,
+        Layer layer, const hidl_vec<Rect>& damage)
+{
+    hwc_region_t damage_region = { damage.size(),
+        reinterpret_cast<const hwc_rect_t*>(&damage[0]) };
+
+    auto error = mDispatch.setLayerSurfaceDamage(mDevice, display, layer,
+            damage_region);
+    return static_cast<Error>(error);
+}
+
+Return<Error> HwcHal::setLayerBlendMode(Display display,
+        Layer layer, BlendMode mode)
+{
+    auto error = mDispatch.setLayerBlendMode(mDevice, display, layer,
+            static_cast<int32_t>(mode));
+    return static_cast<Error>(error);
+}
+
+Return<Error> HwcHal::setLayerColor(Display display,
+        Layer layer, const Color& color)
+{
+    hwc_color_t hwc_color{color.r, color.g, color.b, color.a};
+    auto error = mDispatch.setLayerColor(mDevice, display, layer, hwc_color);
+    return static_cast<Error>(error);
+}
+
+Return<Error> HwcHal::setLayerCompositionType(Display display,
+        Layer layer, Composition type)
+{
+    auto error = mDispatch.setLayerCompositionType(mDevice, display, layer,
+            static_cast<int32_t>(type));
+    return static_cast<Error>(error);
+}
+
+Return<Error> HwcHal::setLayerDataspace(Display display,
+        Layer layer, Dataspace dataspace)
+{
+    auto error = mDispatch.setLayerDataspace(mDevice, display, layer,
+            static_cast<int32_t>(dataspace));
+    return static_cast<Error>(error);
+}
+
+Return<Error> HwcHal::setLayerDisplayFrame(Display display,
+        Layer layer, const Rect& frame)
+{
+    hwc_rect_t hwc_frame{frame.left, frame.top, frame.right, frame.bottom};
+    auto error = mDispatch.setLayerDisplayFrame(mDevice, display, layer,
+            hwc_frame);
+    return static_cast<Error>(error);
+}
+
+Return<Error> HwcHal::setLayerPlaneAlpha(Display display,
+        Layer layer, float alpha)
+{
+    auto error = mDispatch.setLayerPlaneAlpha(mDevice, display, layer, alpha);
+    return static_cast<Error>(error);
+}
+
+Return<Error> HwcHal::setLayerSidebandStream(Display display,
+        Layer layer, const native_handle_t* stream)
+{
+    if (!sHandleImporter.importBuffer(stream)) {
+        return Error::NO_RESOURCES;
+    }
+
+    int32_t error = mDispatch.setLayerSidebandStream(mDevice,
+            display, layer, stream);
+    if (error == HWC2_ERROR_NONE) {
+        std::lock_guard<std::mutex> lock(mDisplayMutex);
+
+        auto dpy = mDisplays.find(display);
+        dpy->second.LayerSidebandStreams[layer] = stream;
+    } else {
+        sHandleImporter.freeBuffer(stream);
+    }
+
+    return static_cast<Error>(error);
+}
+
+Return<Error> HwcHal::setLayerSourceCrop(Display display,
+        Layer layer, const FRect& crop)
+{
+    hwc_frect_t hwc_crop{crop.left, crop.top, crop.right, crop.bottom};
+    auto error = mDispatch.setLayerSourceCrop(mDevice, display, layer,
+            hwc_crop);
+    return static_cast<Error>(error);
+}
+
+Return<Error> HwcHal::setLayerTransform(Display display,
+        Layer layer, Transform transform)
+{
+    auto error = mDispatch.setLayerTransform(mDevice, display, layer,
+            static_cast<int32_t>(transform));
+    return static_cast<Error>(error);
+}
+
+Return<Error> HwcHal::setLayerVisibleRegion(Display display,
+        Layer layer, const hidl_vec<Rect>& visible)
+{
+    hwc_region_t visible_region = { visible.size(),
+        reinterpret_cast<const hwc_rect_t*>(&visible[0]) };
+
+    auto error = mDispatch.setLayerVisibleRegion(mDevice, display, layer,
+            visible_region);
+    return static_cast<Error>(error);
+}
+
+Return<Error> HwcHal::setLayerZOrder(Display display,
+        Layer layer, uint32_t z)
+{
+    auto error = mDispatch.setLayerZOrder(mDevice, display, layer, z);
+    return static_cast<Error>(error);
+}
+
+IComposer* HIDL_FETCH_IComposer(const char*)
+{
+    const hw_module_t* module;
+    int err = hw_get_module(HWC_HARDWARE_MODULE_ID, &module);
+    if (err) {
+        ALOGE("failed to get hwcomposer module");
+        return nullptr;
+    }
+
+    return new HwcHal(module);
+}
+
+} // namespace implementation
+} // namespace V2_1
+} // namespace composer
+} // namespace graphics
+} // namespace hardware
+} // namespace android
diff --git a/graphics/composer/2.1/default/Hwc.h b/graphics/composer/2.1/default/Hwc.h
new file mode 100644
index 0000000..de69417
--- /dev/null
+++ b/graphics/composer/2.1/default/Hwc.h
@@ -0,0 +1,38 @@
+/*
+ * Copyright 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef ANDROID_HARDWARE_GRAPHICS_COMPOSER_V2_1_HWC_H
+#define ANDROID_HARDWARE_GRAPHICS_COMPOSER_V2_1_HWC_H
+
+#include <android/hardware/graphics/composer/2.1/IComposer.h>
+
+namespace android {
+namespace hardware {
+namespace graphics {
+namespace composer {
+namespace V2_1 {
+namespace implementation {
+
+extern "C" IComposer* HIDL_FETCH_IComposer(const char* name);
+
+} // namespace implementation
+} // namespace V2_1
+} // namespace composer
+} // namespace graphics
+} // namespace hardware
+} // namespace android
+
+#endif  // ANDROID_HARDWARE_GRAPHICS_COMPOSER_V2_1_HWC_H
diff --git a/graphics/composer/2.1/types.hal b/graphics/composer/2.1/types.hal
new file mode 100644
index 0000000..3c591b3
--- /dev/null
+++ b/graphics/composer/2.1/types.hal
@@ -0,0 +1,163 @@
+/*
+ * Copyright (C) 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.graphics.composer@2.1;
+
+/* Return codes from all functions. */
+enum Error : int32_t {
+    NONE            = 0, /* no error */
+    BAD_CONFIG      = 1, /* invalid Config */
+    BAD_DISPLAY     = 2, /* invalid Display */
+    BAD_LAYER       = 3, /* invalid Layer */
+    BAD_PARAMETER   = 4, /* invalid width, height, etc. */
+    HAS_CHANGES     = 5,
+    NO_RESOURCES    = 6, /* temporary failure due to resource contention */
+    NOT_VALIDATED   = 7, /* validateDisplay has not been called */
+    UNSUPPORTED     = 8, /* permanent failure */
+};
+
+typedef uint32_t Config;
+typedef uint64_t Display;
+typedef uint64_t Layer;
+
+/*
+ * Copied from android_transform_t
+ *
+ * TODO(olv) copy comments over and generate android_transform_t
+ */
+enum Transform : int32_t {
+    FLIP_H    = 0x1,
+    FLIP_V    = 0x2,
+    ROT_90    = 0x4,
+    ROT_180   = 0x3,
+    ROT_270   = 0x7,
+    RESERVED  = 0x8,
+};
+
+/*
+ * Copied from android_color_mode_t
+ *
+ * TODO(olv) copy comments over and generate android_color_mode_t
+ */
+enum ColorMode : int32_t {
+  NATIVE                        = 0,
+  STANDARD_BT601_625            = 1,
+  STANDARD_BT601_625_UNADJUSTED = 2,
+  STANDARD_BT601_525            = 3,
+  STANDARD_BT601_525_UNADJUSTED = 4,
+  STANDARD_BT709                = 5,
+  DCI_P3                        = 6,
+  SRGB                          = 7,
+  ADOBE_RGB                     = 8,
+};
+
+/*
+ * Copied from android_color_transform_t
+ *
+ * TODO(olv) copy comments over and generate android_color_transform_t
+ */
+enum ColorTransform : int32_t {
+    IDENTITY             = 0,
+    ARBITRARY_MATRIX     = 1,
+    VALUE_INVERSE        = 2,
+    GRAYSCALE            = 3,
+    CORRECT_PROTANOPIA   = 4,
+    CORRECT_DEUTERANOPIA = 5,
+    CORRECT_TRITANOPIA   = 6
+};
+
+/*
+ * Copied from android_dataspace_t
+ *
+ * TODO(olv) copy comments over and generate android_dataspace_t
+ */
+enum Dataspace : int32_t {
+    UNKNOWN                            = 0x0,
+    ARBITRARY                          = 0x1,
+
+    STANDARD_SHIFT                     = 16,
+    STANDARD_MASK                      = 63 << STANDARD_SHIFT,
+    STANDARD_UNSPECIFIED               = 0 << STANDARD_SHIFT,
+    STANDARD_BT709                     = 1 << STANDARD_SHIFT,
+    STANDARD_BT601_625                 = 2 << STANDARD_SHIFT,
+    STANDARD_BT601_625_UNADJUSTED      = 3 << STANDARD_SHIFT,
+    STANDARD_BT601_525                 = 4 << STANDARD_SHIFT,
+    STANDARD_BT601_525_UNADJUSTED      = 5 << STANDARD_SHIFT,
+    STANDARD_BT2020                    = 6 << STANDARD_SHIFT,
+    STANDARD_BT2020_CONSTANT_LUMINANCE = 7 << STANDARD_SHIFT,
+    STANDARD_BT470M                    = 8 << STANDARD_SHIFT,
+    STANDARD_FILM                      = 9 << STANDARD_SHIFT,
+
+    TRANSFER_SHIFT                     = 22,
+    TRANSFER_MASK                      = 31 << TRANSFER_SHIFT,
+    TRANSFER_UNSPECIFIED               = 0 << TRANSFER_SHIFT,
+    TRANSFER_LINEAR                    = 1 << TRANSFER_SHIFT,
+    TRANSFER_SRGB                      = 2 << TRANSFER_SHIFT,
+    TRANSFER_SMPTE_170M                = 3 << TRANSFER_SHIFT,
+    TRANSFER_GAMMA2_2                  = 4 << TRANSFER_SHIFT,
+    TRANSFER_GAMMA2_8                  = 5 << TRANSFER_SHIFT,
+    TRANSFER_ST2084                    = 6 << TRANSFER_SHIFT,
+    TRANSFER_HLG                       = 7 << TRANSFER_SHIFT,
+
+    RANGE_SHIFT                        = 27,
+    RANGE_MASK                         = 7 << RANGE_SHIFT,
+    RANGE_UNSPECIFIED                  = 0 << RANGE_SHIFT,
+    RANGE_FULL                         = 1 << RANGE_SHIFT,
+    RANGE_LIMITED                      = 2 << RANGE_SHIFT,
+
+    SRGB_LINEAR                        = 0x200,
+    V0_SRGB_LINEAR                     = STANDARD_BT709 |
+                                         TRANSFER_LINEAR |
+                                         RANGE_FULL,
+
+    SRGB                               = 0x201,
+    V0_SRGB                            = STANDARD_BT709 |
+                                         TRANSFER_SRGB |
+                                         RANGE_FULL,
+
+    JFIF                               = 0x101,
+    V0_JFIF                            = STANDARD_BT601_625 |
+                                         TRANSFER_SMPTE_170M |
+                                         RANGE_FULL,
+
+    BT601_625                          = 0x102,
+    V0_BT601_625                       = STANDARD_BT601_625 |
+                                         TRANSFER_SMPTE_170M |
+                                         RANGE_LIMITED,
+
+    BT601_525                          = 0x103,
+    V0_BT601_525                       = STANDARD_BT601_525 |
+                                         TRANSFER_SMPTE_170M |
+                                         RANGE_LIMITED,
+
+    BT709                              = 0x104,
+    V0_BT709                           = STANDARD_BT709 |
+                                         TRANSFER_SMPTE_170M |
+                                         RANGE_LIMITED,
+
+    DEPTH                              = 0x1000,
+};
+
+/*
+ * Copied from android_hdr_t
+ *
+ * TODO(olv) copy comments over and generate android_hdr_t
+ */
+enum Hdr : int32_t {
+    DOLBY_VISION = 1,
+    HDR10        = 2,
+    HLG          = 3,
+};
diff --git a/graphics/mapper/2.0/Android.bp b/graphics/mapper/2.0/Android.bp
new file mode 100644
index 0000000..3718503
--- /dev/null
+++ b/graphics/mapper/2.0/Android.bp
@@ -0,0 +1,15 @@
+genrule {
+    name: "android.hardware.graphics.mapper@2.0_genc++_headers",
+    cmd: "cp $in $genDir/android/hardware/graphics/mapper/2.0",
+    srcs: ["IMapper.h", "types.h"],
+    out: [
+        "android/hardware/graphics/mapper/2.0/IMapper.h",
+        "android/hardware/graphics/mapper/2.0/types.h",
+    ],
+}
+
+cc_library_static {
+    name: "android.hardware.graphics.mapper@2.0",
+    generated_headers: ["android.hardware.graphics.mapper@2.0_genc++_headers"],
+    export_generated_headers: ["android.hardware.graphics.mapper@2.0_genc++_headers"],
+}
diff --git a/graphics/mapper/2.0/IMapper.h b/graphics/mapper/2.0/IMapper.h
new file mode 100644
index 0000000..23faa80
--- /dev/null
+++ b/graphics/mapper/2.0/IMapper.h
@@ -0,0 +1,388 @@
+/*
+ * Copyright 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef ANDROID_HARDWARE_GRAPHICS_MAPPER_V2_0_IMAPPER_H
+#define ANDROID_HARDWARE_GRAPHICS_MAPPER_V2_0_IMAPPER_H
+
+#include <type_traits>
+
+#include <android/hardware/graphics/mapper/2.0/types.h>
+
+extern "C" {
+
+namespace android {
+namespace hardware {
+namespace graphics {
+namespace mapper {
+namespace V2_0 {
+
+struct Device {
+    struct Rect {
+        int32_t left;
+        int32_t top;
+        int32_t width;
+        int32_t height;
+    };
+    static_assert(std::is_pod<Rect>::value, "Device::Rect is not POD");
+
+    /*
+     * Create a mapper device.
+     *
+     * @return error is NONE upon success. Otherwise,
+     *                  NOT_SUPPORTED when creation will never succeed.
+     *                  BAD_RESOURCES when creation failed at this time.
+     * @return device is the newly created mapper device.
+     */
+    typedef Error (*createDevice)(Device** outDevice);
+
+    /*
+     * Destroy a mapper device.
+     *
+     * @return error is always NONE.
+     * @param device is the mapper device to destroy.
+     */
+    typedef Error (*destroyDevice)(Device* device);
+
+    /*
+     * Adds a reference to the given buffer handle.
+     *
+     * A buffer handle received from a remote process or exported by
+     * IAllocator::exportHandle is unknown to this client-side library. There
+     * is also no guarantee that the buffer's backing store will stay alive.
+     * This function must be called at least once in both cases to intrdouce
+     * the buffer handle to this client-side library and to secure the backing
+     * store. It may also be called more than once to increase the reference
+     * count if two components in the same process want to interact with the
+     * buffer independently.
+     *
+     * @param device is the mapper device.
+     * @param bufferHandle is the buffer to which a reference must be added.
+     * @return error is NONE upon success. Otherwise,
+     *                  BAD_BUFFER when the buffer handle is invalid
+     *                  NO_RESOURCES when it is not possible to add a
+     *                               reference to this buffer at this time
+     */
+    typedef Error (*retain)(Device* device,
+                            const native_handle_t* bufferHandle);
+
+    /*
+     * Removes a reference from the given buffer buffer.
+     *
+     * If no references remain, the buffer handle should be freed with
+     * native_handle_close/native_handle_delete. When the last buffer handle
+     * referring to a particular backing store is freed, that backing store
+     * should also be freed.
+     *
+     * @param device is the mapper device.
+     * @param bufferHandle is the buffer from which a reference must be
+     *        removed.
+     * @return error is NONE upon success. Otherwise,
+     *                  BAD_BUFFER when the buffer handle is invalid.
+     */
+    typedef Error (*release)(Device* device,
+                             const native_handle_t* bufferHandle);
+
+    /*
+     * Gets the width and height of the buffer in pixels.
+     *
+     * See IAllocator::BufferDescriptorInfo for more information.
+     *
+     * @param device is the mapper device.
+     * @param bufferHandle is the buffer from which to get the dimensions.
+     * @return error is NONE upon success. Otherwise,
+     *                  BAD_BUFFER when the buffer handle is invalid.
+     * @return width is the width of the buffer in pixels.
+     * @return height is the height of the buffer in pixels.
+     */
+    typedef Error (*getDimensions)(Device* device,
+                                   const native_handle_t* bufferHandle,
+                                   uint32_t* outWidth,
+                                   uint32_t* outHeight);
+
+    /*
+     * Gets the format of the buffer.
+     *
+     * See IAllocator::BufferDescriptorInfo for more information.
+     *
+     * @param device is the mapper device.
+     * @param bufferHandle is the buffer from which to get format.
+     * @return error is NONE upon success. Otherwise,
+     *                  BAD_BUFFER when the buffer handle is invalid.
+     * @return format is the format of the buffer.
+     */
+    typedef Error (*getFormat)(Device* device,
+                               const native_handle_t* bufferHandle,
+                               PixelFormat* outFormat);
+
+    /*
+     * Gets the producer usage flags which were used to allocate this buffer.
+     *
+     * See IAllocator::BufferDescriptorInfo for more information.
+     *
+     * @param device is the mapper device.
+     * @param bufferHandle is the buffer from which to get the producer usage
+     *        flags.
+     * @return error is NONE upon success. Otherwise,
+     *                  BAD_BUFFER when the buffer handle is invalid.
+     * @return usageMask contains the producer usage flags of the buffer.
+     */
+    typedef Error (*getProducerUsageMask)(Device* device,
+                                          const native_handle_t* bufferHandle,
+                                          uint64_t* outUsageMask);
+
+    /*
+     * Gets the consumer usage flags which were used to allocate this buffer.
+     *
+     * See IAllocator::BufferDescriptorInfo for more information.
+     *
+     * @param device is the mapper device.
+     * @param bufferHandle is the buffer from which to get the consumer usage
+     *        flags.
+     * @return error is NONE upon success. Otherwise,
+     *                  BAD_BUFFER when the buffer handle is invalid.
+     * @return usageMask contains the consumer usage flags of the buffer.
+     */
+    typedef Error (*getConsumerUsageMask)(Device* device,
+                                          const native_handle_t* bufferHandle,
+                                          uint64_t* outUsageMask);
+
+    /*
+     * Gets a value that uniquely identifies the backing store of the given
+     * buffer.
+     *
+     * Buffers which share a backing store should return the same value from
+     * this function. If the buffer is present in more than one process, the
+     * backing store value for that buffer is not required to be the same in
+     * every process.
+     *
+     * @param device is the mapper device.
+     * @param bufferHandle is the buffer from which to get the backing store
+     *        identifier.
+     * @return error is NONE upon success. Otherwise,
+     *                  BAD_BUFFER when the buffer handle is invalid.
+     * @return store is the backing store identifier for this buffer.
+     */
+    typedef Error (*getBackingStore)(Device* device,
+                                     const native_handle_t* bufferHandle,
+                                     BackingStore* outStore);
+
+    /*
+     * Gets the stride of the buffer in pixels.
+     *
+     * The stride is the offset in pixel-sized elements between the same
+     * column in two adjacent rows of pixels. This may not be equal to the
+     * width of the buffer.
+     *
+     * @param device is the mapper device.
+     * @param bufferHandle is the buffer from which to get the stride.
+     * @return error is NONE upon success. Otherwise,
+     *                  BAD_BUFFER when the buffer handle is invalid.
+     *                  UNDEFINED when the notion of a stride is not
+     *                            meaningful for the buffer format.
+     * @return store is the stride in pixels.
+     */
+    typedef Error (*getStride)(Device* device,
+                               const native_handle_t* bufferHandle,
+                               uint32_t* outStride);
+
+    /*
+     * Returns the number of flex layout planes which are needed to represent
+     * the given buffer. This may be used to efficiently allocate only as many
+     * plane structures as necessary before calling into lockFlex.
+     *
+     * If the given buffer cannot be locked as a flex format, this function
+     * may return UNSUPPORTED (as lockFlex would).
+     *
+     * @param device is the mapper device.
+     * @param bufferHandle is the buffer for which the number of planes should
+     *        be queried.
+     * @return error is NONE upon success. Otherwise,
+     *                  BAD_BUFFER when the buffer handle is invalid.
+     *                  UNSUPPORTED when the buffer's format cannot be
+     *                              represented in a flex layout.
+     * @return numPlanes is the number of flex planes required to describe the
+     *         given buffer.
+     */
+    typedef Error (*getNumFlexPlanes)(Device* device,
+                                      const native_handle_t* bufferHandle,
+                                      uint32_t* outNumPlanes);
+
+    /*
+     * Locks the given buffer for the specified CPU usage.
+     *
+     * Exactly one of producerUsageMask and consumerUsageMask must be 0. The
+     * usage which is not 0 must be one of the *Usage::CPU* values, as
+     * applicable. Locking a buffer for a non-CPU usage is not supported.
+     *
+     * Locking the same buffer simultaneously from multiple threads is
+     * permitted, but if any of the threads attempt to lock the buffer for
+     * writing, the behavior is undefined, except that it must not cause
+     * process termination or block the client indefinitely. Leaving the
+     * buffer content in an indeterminate state or returning an error are both
+     * acceptable.
+     *
+     * The client must not modify the content of the buffer outside of
+     * accessRegion, and the device need not guarantee that content outside of
+     * accessRegion is valid for reading. The result of reading or writing
+     * outside of accessRegion is undefined, except that it must not cause
+     * process termination.
+     *
+     * data will be filled with a pointer to the locked buffer memory. This
+     * address will represent the top-left corner of the entire buffer, even
+     * if accessRegion does not begin at the top-left corner.
+     *
+     * acquireFence is a file descriptor referring to a acquire sync fence
+     * object, which will be signaled when it is safe for the device to access
+     * the contents of the buffer (prior to locking). If it is already safe to
+     * access the buffer contents, -1 may be passed instead.
+     *
+     * @param device is the mapper device.
+     * @param bufferHandle is the buffer to lock.
+     * @param producerUsageMask contains the producer usage flags to request;
+     *        either this or consumerUsagemask must be 0, and the other must
+     *        be a CPU usage.
+     * @param consumerUsageMask contains the consumer usage flags to request;
+     *        either this or producerUsageMask must be 0, and the other must
+     *        be a CPU usage.
+     * @param accessRegion is the portion of the buffer that the client
+     *        intends to access.
+     * @param acquireFence is a sync fence file descriptor as described above.
+     * @return error is NONE upon success. Otherwise,
+     *                  BAD_BUFFER when the buffer handle is invalid.
+     *                  BAD_VALUE when neither or both of producerUsageMask
+     *                            and consumerUsageMask were 0, or the usage
+     *                            which was not 0 was not a CPU usage.
+     *                  NO_RESOURCES when the buffer cannot be locked at this
+     *                               time, but locking may succeed at a future
+     *                               time.
+     *                  UNSUPPORTED when the buffer cannot be locked with the
+     *                              given usage, and any future attempts at
+     *                              locking will also fail.
+     * @return data will be filled with a CPU-accessible pointer to the buffer
+     *         data.
+     */
+    typedef Error (*lock)(Device* device,
+                          const native_handle_t* bufferHandle,
+                          uint64_t producerUsageMask,
+                          uint64_t consumerUsageMask,
+                          const Rect* accessRegion,
+                          int32_t acquireFence,
+                          void** outData);
+
+    /*
+     * This is largely the same as lock(), except that instead of returning a
+     * pointer directly to the buffer data, it returns an FlexLayout struct
+     * describing how to access the data planes.
+     *
+     * This function must work on buffers with PixelFormat::YCbCr_*_888 if
+     * supported by the device, as well as with any other formats requested by
+     * multimedia codecs when they are configured with a
+     * flexible-YUV-compatible color format.
+     *
+     * This function may also be called on buffers of other formats, including
+     * non-YUV formats, but if the buffer format is not compatible with a
+     * flexible representation, it may return UNSUPPORTED.
+     *
+     * @param device is the mapper device.
+     * @param bufferHandle is the buffer to lock.
+     * @param producerUsageMask contains the producer usage flags to request;
+     *        either this or consumerUsagemask must be 0, and the other must
+     *        be a CPU usage.
+     * @param consumerUsageMask contains the consumer usage flags to request;
+     *        either this or producerUsageMask must be 0, and the other must
+     *        be a CPU usage.
+     * @param accessRegion is the portion of the buffer that the client
+     *        intends to access.
+     * @param acquireFence is a sync fence file descriptor as described in
+     *        lock().
+     * @return error is NONE upon success. Otherwise,
+     *                  BAD_BUFFER when the buffer handle is invalid.
+     *                  BAD_VALUE when neither or both of producerUsageMask
+     *                            and consumerUsageMask were 0, or the usage
+     *                            which was not 0 was not a CPU usage.
+     *                  NO_RESOURCES when the buffer cannot be locked at this
+     *                               time, but locking may succeed at a future
+     *                               time.
+     *                  UNSUPPORTED when the buffer cannot be locked with the
+     *                              given usage, and any future attempts at
+     *                              locking will also fail.
+     * @return flexLayout will be filled with the description of the planes in
+     *         the buffer.
+     */
+    typedef Error (*lockFlex)(Device* device,
+                              const native_handle_t* bufferHandle,
+                              uint64_t producerUsageMask,
+                              uint64_t consumerUsageMask,
+                              const Rect* accessRegion,
+                              int32_t acquireFence,
+                              FlexLayout* outFlexLayout);
+
+    /*
+     * This function indicates to the device that the client will be done with
+     * the buffer when releaseFence signals.
+     *
+     * releaseFence will be filled with a file descriptor referring to a
+     * release sync fence object, which will be signaled when it is safe to
+     * access the contents of the buffer (after the buffer has been unlocked).
+     * If it is already safe to access the buffer contents, then -1 may be
+     * returned instead.
+     *
+     * This function is used to unlock both buffers locked by lock() and those
+     * locked by lockFlex().
+     *
+     * @param device is the mapper device.
+     * @param bufferHandle is the buffer to unlock.
+     * @return error is NONE upon success. Otherwise,
+     *                  BAD_BUFFER when the buffer handle is invalid.
+     * @return releaseFence is a sync fence file descriptor as described
+     *         above.
+     */
+    typedef Error (*unlock)(Device* device,
+                            const native_handle_t* bufferHandle,
+                            int32_t* outReleaseFence);
+};
+static_assert(std::is_pod<Device>::value, "Device is not POD");
+
+struct IMapper {
+    Device::createDevice createDevice;
+    Device::destroyDevice destroyDevice;
+
+    Device::retain retain;
+    Device::release release;
+    Device::getDimensions getDimensions;
+    Device::getFormat getFormat;
+    Device::getProducerUsageMask getProducerUsageMask;
+    Device::getConsumerUsageMask getConsumerUsageMask;
+    Device::getBackingStore getBackingStore;
+    Device::getStride getStride;
+    Device::getNumFlexPlanes getNumFlexPlanes;
+    Device::lock lock;
+    Device::lockFlex lockFlex;
+    Device::unlock unlock;
+};
+static_assert(std::is_pod<IMapper>::value, "IMapper is not POD");
+
+} // namespace V2_0
+} // namespace mapper
+} // namespace graphics
+} // namespace hardware
+} // namespace android
+
+const void* HALLIB_FETCH_Interface(const char* name);
+
+} // extern "C"
+
+#endif /* ANDROID_HARDWARE_GRAPHICS_MAPPER_V2_0_IMAPPER_H */
diff --git a/graphics/mapper/2.0/default/Android.bp b/graphics/mapper/2.0/default/Android.bp
new file mode 100644
index 0000000..b738ae8
--- /dev/null
+++ b/graphics/mapper/2.0/default/Android.bp
@@ -0,0 +1,28 @@
+// Copyright (C) 2016 The Android Open Source Project
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//      http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+cc_library_shared {
+    name: "android.hardware.graphics.mapper.hallib",
+    relative_install_path: "hw",
+    srcs: ["GrallocMapper.cpp"],
+    cppflags: ["-Wall", "-Wextra"],
+    static_libs: ["android.hardware.graphics.mapper@2.0"],
+    shared_libs: [
+        "android.hardware.graphics.allocator@2.0",
+        "libhardware",
+        "libhidl",
+        "libhwbinder",
+        "liblog",
+    ],
+}
diff --git a/graphics/mapper/2.0/default/GrallocMapper.cpp b/graphics/mapper/2.0/default/GrallocMapper.cpp
new file mode 100644
index 0000000..eeca5c7
--- /dev/null
+++ b/graphics/mapper/2.0/default/GrallocMapper.cpp
@@ -0,0 +1,373 @@
+/*
+ * Copyright 2016 The Android Open Source Project
+ * * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#define LOG_TAG "GrallocMapperPassthrough"
+
+#include <android/hardware/graphics/mapper/2.0/IMapper.h>
+#include <hardware/gralloc1.h>
+#include <log/log.h>
+
+namespace android {
+namespace hardware {
+namespace graphics {
+namespace mapper {
+namespace V2_0 {
+namespace implementation {
+
+class GrallocDevice : public Device {
+public:
+    GrallocDevice();
+    ~GrallocDevice();
+
+    // IMapper interface
+    Error retain(const native_handle_t* bufferHandle);
+    Error release(const native_handle_t* bufferHandle);
+    Error getDimensions(const native_handle_t* bufferHandle,
+            uint32_t* outWidth, uint32_t* outHeight);
+    Error getFormat(const native_handle_t* bufferHandle,
+            PixelFormat* outFormat);
+    Error getProducerUsageMask(const native_handle_t* bufferHandle,
+            uint64_t* outUsageMask);
+    Error getConsumerUsageMask(const native_handle_t* bufferHandle,
+            uint64_t* outUsageMask);
+    Error getBackingStore(const native_handle_t* bufferHandle,
+            BackingStore* outStore);
+    Error getStride(const native_handle_t* bufferHandle, uint32_t* outStride);
+    Error getNumFlexPlanes(const native_handle_t* bufferHandle,
+            uint32_t* outNumPlanes);
+    Error lock(const native_handle_t* bufferHandle,
+            uint64_t producerUsageMask, uint64_t consumerUsageMask,
+            const Rect* accessRegion, int32_t acquireFence, void** outData);
+    Error lockFlex(const native_handle_t* bufferHandle,
+            uint64_t producerUsageMask, uint64_t consumerUsageMask,
+            const Rect* accessRegion, int32_t acquireFence,
+            FlexLayout* outFlexLayout);
+    Error unlock(const native_handle_t* bufferHandle,
+            int32_t* outReleaseFence);
+
+private:
+    void initDispatch();
+
+    gralloc1_device_t* mDevice;
+
+    struct {
+        GRALLOC1_PFN_RETAIN retain;
+        GRALLOC1_PFN_RELEASE release;
+        GRALLOC1_PFN_GET_DIMENSIONS getDimensions;
+        GRALLOC1_PFN_GET_FORMAT getFormat;
+        GRALLOC1_PFN_GET_PRODUCER_USAGE getProducerUsage;
+        GRALLOC1_PFN_GET_CONSUMER_USAGE getConsumerUsage;
+        GRALLOC1_PFN_GET_BACKING_STORE getBackingStore;
+        GRALLOC1_PFN_GET_STRIDE getStride;
+        GRALLOC1_PFN_GET_NUM_FLEX_PLANES getNumFlexPlanes;
+        GRALLOC1_PFN_LOCK lock;
+        GRALLOC1_PFN_LOCK_FLEX lockFlex;
+        GRALLOC1_PFN_UNLOCK unlock;
+    } mDispatch;
+};
+
+GrallocDevice::GrallocDevice()
+{
+    const hw_module_t* module;
+    int status = hw_get_module(GRALLOC_HARDWARE_MODULE_ID, &module);
+    if (status) {
+        LOG_ALWAYS_FATAL("failed to get gralloc module");
+    }
+
+    uint8_t major = (module->module_api_version >> 8) & 0xff;
+    if (major != 1) {
+        LOG_ALWAYS_FATAL("unknown gralloc module major version %d", major);
+    }
+
+    status = gralloc1_open(module, &mDevice);
+    if (status) {
+        LOG_ALWAYS_FATAL("failed to open gralloc1 device");
+    }
+
+    initDispatch();
+}
+
+GrallocDevice::~GrallocDevice()
+{
+    gralloc1_close(mDevice);
+}
+
+void GrallocDevice::initDispatch()
+{
+#define CHECK_FUNC(func, desc) do {                                   \
+    mDispatch.func = reinterpret_cast<decltype(mDispatch.func)>(      \
+        mDevice->getFunction(mDevice, desc));                         \
+    if (!mDispatch.func) {                                            \
+        LOG_ALWAYS_FATAL("failed to get gralloc1 function %d", desc); \
+    }                                                                 \
+} while (0)
+
+    CHECK_FUNC(retain, GRALLOC1_FUNCTION_RETAIN);
+    CHECK_FUNC(release, GRALLOC1_FUNCTION_RELEASE);
+    CHECK_FUNC(getDimensions, GRALLOC1_FUNCTION_GET_DIMENSIONS);
+    CHECK_FUNC(getFormat, GRALLOC1_FUNCTION_GET_FORMAT);
+    CHECK_FUNC(getProducerUsage, GRALLOC1_FUNCTION_GET_PRODUCER_USAGE);
+    CHECK_FUNC(getConsumerUsage, GRALLOC1_FUNCTION_GET_CONSUMER_USAGE);
+    CHECK_FUNC(getBackingStore, GRALLOC1_FUNCTION_GET_BACKING_STORE);
+    CHECK_FUNC(getStride, GRALLOC1_FUNCTION_GET_STRIDE);
+    CHECK_FUNC(getNumFlexPlanes, GRALLOC1_FUNCTION_GET_NUM_FLEX_PLANES);
+    CHECK_FUNC(lock, GRALLOC1_FUNCTION_LOCK);
+    CHECK_FUNC(lockFlex, GRALLOC1_FUNCTION_LOCK_FLEX);
+    CHECK_FUNC(unlock, GRALLOC1_FUNCTION_UNLOCK);
+
+#undef CHECK_FUNC
+}
+
+Error GrallocDevice::retain(const native_handle_t* bufferHandle)
+{
+    int32_t error = mDispatch.retain(mDevice, bufferHandle);
+    return static_cast<Error>(error);
+}
+
+Error GrallocDevice::release(const native_handle_t* bufferHandle)
+{
+    int32_t error = mDispatch.release(mDevice, bufferHandle);
+    return static_cast<Error>(error);
+}
+
+Error GrallocDevice::getDimensions(const native_handle_t* bufferHandle,
+        uint32_t* outWidth, uint32_t* outHeight)
+{
+    int32_t error = mDispatch.getDimensions(mDevice, bufferHandle,
+            outWidth, outHeight);
+    return static_cast<Error>(error);
+}
+
+Error GrallocDevice::getFormat(const native_handle_t* bufferHandle,
+        PixelFormat* outFormat)
+{
+    int32_t error = mDispatch.getFormat(mDevice, bufferHandle,
+            reinterpret_cast<int32_t*>(outFormat));
+    return static_cast<Error>(error);
+}
+
+Error GrallocDevice::getProducerUsageMask(const native_handle_t* bufferHandle,
+        uint64_t* outUsageMask)
+{
+    int32_t error = mDispatch.getProducerUsage(mDevice, bufferHandle,
+            outUsageMask);
+    return static_cast<Error>(error);
+}
+
+Error GrallocDevice::getConsumerUsageMask(const native_handle_t* bufferHandle,
+        uint64_t* outUsageMask)
+{
+    int32_t error = mDispatch.getConsumerUsage(mDevice, bufferHandle,
+            outUsageMask);
+    return static_cast<Error>(error);
+}
+
+Error GrallocDevice::getBackingStore(const native_handle_t* bufferHandle,
+        BackingStore* outStore)
+{
+    int32_t error = mDispatch.getBackingStore(mDevice, bufferHandle,
+            outStore);
+    return static_cast<Error>(error);
+}
+
+Error GrallocDevice::getStride(const native_handle_t* bufferHandle,
+        uint32_t* outStride)
+{
+    int32_t error = mDispatch.getStride(mDevice, bufferHandle, outStride);
+    return static_cast<Error>(error);
+}
+
+Error GrallocDevice::getNumFlexPlanes(const native_handle_t* bufferHandle,
+        uint32_t* outNumPlanes)
+{
+    int32_t error = mDispatch.getNumFlexPlanes(mDevice, bufferHandle,
+            outNumPlanes);
+    return static_cast<Error>(error);
+}
+
+Error GrallocDevice::lock(const native_handle_t* bufferHandle,
+        uint64_t producerUsageMask, uint64_t consumerUsageMask,
+        const Rect* accessRegion, int32_t acquireFence,
+        void** outData)
+{
+    int32_t error = mDispatch.lock(mDevice, bufferHandle,
+            producerUsageMask, consumerUsageMask,
+            reinterpret_cast<const gralloc1_rect_t*>(accessRegion),
+            outData, acquireFence);
+    return static_cast<Error>(error);
+}
+
+Error GrallocDevice::lockFlex(const native_handle_t* bufferHandle,
+        uint64_t producerUsageMask, uint64_t consumerUsageMask,
+        const Rect* accessRegion, int32_t acquireFence,
+        FlexLayout* outFlexLayout)
+{
+    int32_t error = mDispatch.lockFlex(mDevice, bufferHandle,
+            producerUsageMask, consumerUsageMask,
+            reinterpret_cast<const gralloc1_rect_t*>(accessRegion),
+            reinterpret_cast<android_flex_layout_t*>(outFlexLayout),
+            acquireFence);
+    return static_cast<Error>(error);
+}
+
+Error GrallocDevice::unlock(const native_handle_t* bufferHandle,
+        int32_t* outReleaseFence)
+{
+    int32_t error = mDispatch.unlock(mDevice, bufferHandle, outReleaseFence);
+    return static_cast<Error>(error);
+}
+
+class GrallocMapper : public IMapper {
+public:
+    GrallocMapper() : IMapper{
+        .createDevice = createDevice,
+        .destroyDevice = destroyDevice,
+        .retain = retain,
+        .release = release,
+        .getDimensions = getDimensions,
+        .getFormat = getFormat,
+        .getProducerUsageMask = getProducerUsageMask,
+        .getConsumerUsageMask = getConsumerUsageMask,
+        .getBackingStore = getBackingStore,
+        .getStride = getStride,
+        .getNumFlexPlanes = getNumFlexPlanes,
+        .lock = lock,
+        .lockFlex = lockFlex,
+        .unlock = unlock,
+    } {}
+
+    const IMapper* getInterface() const
+    {
+        return static_cast<const IMapper*>(this);
+    }
+
+private:
+    static GrallocDevice* cast(Device* device)
+    {
+        return reinterpret_cast<GrallocDevice*>(device);
+    }
+
+    static Error createDevice(Device** outDevice)
+    {
+        *outDevice = new GrallocDevice;
+        return Error::NONE;
+    }
+
+    static Error destroyDevice(Device* device)
+    {
+        delete cast(device);
+        return Error::NONE;
+    }
+
+    static Error retain(Device* device,
+            const native_handle_t* bufferHandle)
+    {
+        return cast(device)->retain(bufferHandle);
+    }
+
+    static Error release(Device* device,
+            const native_handle_t* bufferHandle)
+    {
+        return cast(device)->release(bufferHandle);
+    }
+
+    static Error getDimensions(Device* device,
+            const native_handle_t* bufferHandle,
+            uint32_t* outWidth, uint32_t* outHeight)
+    {
+        return cast(device)->getDimensions(bufferHandle, outWidth, outHeight);
+    }
+
+    static Error getFormat(Device* device,
+            const native_handle_t* bufferHandle, PixelFormat* outFormat)
+    {
+        return cast(device)->getFormat(bufferHandle, outFormat);
+    }
+
+    static Error getProducerUsageMask(Device* device,
+            const native_handle_t* bufferHandle, uint64_t* outUsageMask)
+    {
+        return cast(device)->getProducerUsageMask(bufferHandle, outUsageMask);
+    }
+
+    static Error getConsumerUsageMask(Device* device,
+            const native_handle_t* bufferHandle, uint64_t* outUsageMask)
+    {
+        return cast(device)->getConsumerUsageMask(bufferHandle, outUsageMask);
+    }
+
+    static Error getBackingStore(Device* device,
+            const native_handle_t* bufferHandle, BackingStore* outStore)
+    {
+        return cast(device)->getBackingStore(bufferHandle, outStore);
+    }
+
+    static Error getStride(Device* device,
+            const native_handle_t* bufferHandle, uint32_t* outStride)
+    {
+        return cast(device)->getStride(bufferHandle, outStride);
+    }
+
+    static Error getNumFlexPlanes(Device* device,
+            const native_handle_t* bufferHandle, uint32_t* outNumPlanes)
+    {
+        return cast(device)->getNumFlexPlanes(bufferHandle, outNumPlanes);
+    }
+
+    static Error lock(Device* device,
+            const native_handle_t* bufferHandle,
+            uint64_t producerUsageMask, uint64_t consumerUsageMask,
+            const Device::Rect* accessRegion, int32_t acquireFence,
+            void** outData)
+    {
+        return cast(device)->lock(bufferHandle,
+                producerUsageMask, consumerUsageMask,
+                accessRegion, acquireFence, outData);
+    }
+
+    static Error lockFlex(Device* device,
+            const native_handle_t* bufferHandle,
+            uint64_t producerUsageMask, uint64_t consumerUsageMask,
+            const Device::Rect* accessRegion, int32_t acquireFence,
+            FlexLayout* outFlexLayout)
+    {
+        return cast(device)->lockFlex(bufferHandle,
+                producerUsageMask, consumerUsageMask,
+                accessRegion, acquireFence, outFlexLayout);
+    }
+
+    static Error unlock(Device* device,
+            const native_handle_t* bufferHandle, int32_t* outReleaseFence)
+    {
+        return cast(device)->unlock(bufferHandle, outReleaseFence);
+    }
+};
+
+extern "C" const void* HALLIB_FETCH_Interface(const char* name)
+{
+    if (strcmp(name, "android.hardware.graphics.mapper@2.0::IMapper") == 0) {
+        static GrallocMapper sGrallocMapper;
+        return sGrallocMapper.getInterface();
+    }
+
+    return nullptr;
+}
+
+} // namespace implementation
+} // namespace V2_0
+} // namespace mapper
+} // namespace graphics
+} // namespace hardware
+} // namespace android
diff --git a/graphics/mapper/2.0/types.h b/graphics/mapper/2.0/types.h
new file mode 100644
index 0000000..63a6b16
--- /dev/null
+++ b/graphics/mapper/2.0/types.h
@@ -0,0 +1,164 @@
+/*
+ * Copyright 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef ANDROID_HARDWARE_GRAPHICS_MAPPER_V2_0_TYPES_H
+#define ANDROID_HARDWARE_GRAPHICS_MAPPER_V2_0_TYPES_H
+
+#include <type_traits>
+
+#include <android/hardware/graphics/allocator/2.0/types.h>
+
+namespace android {
+namespace hardware {
+namespace graphics {
+namespace mapper {
+namespace V2_0 {
+
+using android::hardware::graphics::allocator::V2_0::Error;
+using android::hardware::graphics::allocator::V2_0::PixelFormat;
+using android::hardware::graphics::allocator::V2_0::ProducerUsage;
+using android::hardware::graphics::allocator::V2_0::ConsumerUsage;
+
+/*
+ * Structures for describing flexible YUVA/RGBA formats for consumption by
+ * applications. Such flexible formats contain a plane for each component
+ * (e.g.  red, green, blue), where each plane is laid out in a grid-like
+ * pattern occupying unique byte addresses and with consistent byte offsets
+ * between neighboring pixels.
+ *
+ * The FlexLayout structure is used with any pixel format that can be
+ * represented by it, such as:
+ *
+ *  - PixelFormat::YCbCr_*_888
+ *  - PixelFormat::FLEX_RGB*_888
+ *  - PixelFormat::RGB[AX]_888[8],BGRA_8888,RGB_888
+ *  - PixelFormat::YV12,Y8,Y16,YCbCr_422_SP/I,YCrCb_420_SP
+ *  - even implementation defined formats that can be represented by the
+ *    structures
+ *
+ * Vertical increment (aka. row increment or stride) describes the distance in
+ * bytes from the first pixel of one row to the first pixel of the next row
+ * (below) for the component plane. This can be negative.
+ *
+ * Horizontal increment (aka. column or pixel increment) describes the
+ * distance in bytes from one pixel to the next pixel (to the right) on the
+ * same row for the component plane. This can be negative.
+ *
+ * Each plane can be subsampled either vertically or horizontally by a
+ * power-of-two factor.
+ *
+ * The bit-depth of each component can be arbitrary, as long as the pixels are
+ * laid out on whole bytes, in native byte-order, using the most significant
+ * bits of each unit.
+ */
+
+enum class FlexComponent : int32_t {
+    Y          = 1 << 0,  /* luma */
+    Cb         = 1 << 1,  /* chroma blue */
+    Cr         = 1 << 2,  /* chroma red */
+
+    R          = 1 << 10, /* red */
+    G          = 1 << 11, /* green */
+    B          = 1 << 12, /* blue */
+
+    A          = 1 << 30, /* alpha */
+};
+
+inline FlexComponent operator|(FlexComponent lhs, FlexComponent rhs)
+{
+    return static_cast<FlexComponent>(static_cast<int32_t>(lhs) |
+                                      static_cast<int32_t>(rhs));
+}
+
+inline FlexComponent& operator|=(FlexComponent &lhs, FlexComponent rhs)
+{
+    lhs = static_cast<FlexComponent>(static_cast<int32_t>(lhs) |
+                                     static_cast<int32_t>(rhs));
+    return lhs;
+}
+
+enum class FlexFormat : int32_t {
+    /* not a flexible format */
+    INVALID    = 0x0,
+
+    Y          = static_cast<int32_t>(FlexComponent::Y),
+    YCbCr      = static_cast<int32_t>(FlexComponent::Y) |
+                 static_cast<int32_t>(FlexComponent::Cb) |
+                 static_cast<int32_t>(FlexComponent::Cr),
+    YCbCrA     = static_cast<int32_t>(YCbCr) |
+                 static_cast<int32_t>(FlexComponent::A),
+    RGB        = static_cast<int32_t>(FlexComponent::R) |
+                 static_cast<int32_t>(FlexComponent::G) |
+                 static_cast<int32_t>(FlexComponent::B),
+    RGBA       = static_cast<int32_t>(RGB) |
+                 static_cast<int32_t>(FlexComponent::A),
+};
+
+struct FlexPlane {
+    /* pointer to the first byte of the top-left pixel of the plane. */
+    uint8_t *topLeft;
+
+    FlexComponent component;
+
+    /*
+     * bits allocated for the component in each pixel. Must be a positive
+     * multiple of 8.
+     */
+    int32_t bitsPerComponent;
+
+    /*
+     * number of the most significant bits used in the format for this
+     * component. Must be between 1 and bits_per_component, inclusive.
+     */
+    int32_t bitsUsed;
+
+    /* horizontal increment */
+    int32_t hIncrement;
+    /* vertical increment */
+    int32_t vIncrement;
+
+    /* horizontal subsampling. Must be a positive power of 2. */
+    int32_t hSubsampling;
+    /* vertical subsampling. Must be a positive power of 2. */
+    int32_t vSubsampling;
+};
+static_assert(std::is_pod<FlexPlane>::value, "FlexPlane is not POD");
+
+struct FlexLayout {
+    /* the kind of flexible format */
+    FlexFormat format;
+
+    /* number of planes; 0 for FLEX_FORMAT_INVALID */
+    uint32_t numPlanes;
+
+    /*
+     * a plane for each component; ordered in increasing component value order.
+     * E.g. FLEX_FORMAT_RGBA maps 0 -> R, 1 -> G, etc.
+     * Can be NULL for FLEX_FORMAT_INVALID
+     */
+    FlexPlane* planes;
+};
+static_assert(std::is_pod<FlexLayout>::value, "FlexLayout is not POD");
+
+typedef uint64_t BackingStore;
+
+} // namespace V2_0
+} // namespace mapper
+} // namespace graphics
+} // namespace hardware
+} // namespace android
+
+#endif /* ANDROID_HARDWARE_GRAPHICS_MAPPER_V2_0_TYPES_H */
diff --git a/light/2.0/Android.bp b/light/2.0/Android.bp
new file mode 100644
index 0000000..a3b03a7
--- /dev/null
+++ b/light/2.0/Android.bp
@@ -0,0 +1,46 @@
+// This file is autogenerated by hidl-gen. Do not edit manually.
+
+genrule {
+    name: "android.hardware.light@2.0_genc++",
+    tool: "hidl-gen",
+    cmd: "$tool -o $genDir -Lc++ -randroid.hardware:hardware/interfaces android.hardware.light@2.0",
+    srcs: [
+        "types.hal",
+        "ILight.hal",
+    ],
+    out: [
+        "android/hardware/light/2.0/types.cpp",
+        "android/hardware/light/2.0/LightAll.cpp",
+    ],
+}
+
+genrule {
+    name: "android.hardware.light@2.0_genc++_headers",
+    tool: "hidl-gen",
+    cmd: "$tool -o $genDir -Lc++ -randroid.hardware:hardware/interfaces android.hardware.light@2.0",
+    srcs: [
+        "types.hal",
+        "ILight.hal",
+    ],
+    out: [
+        "android/hardware/light/2.0/types.h",
+        "android/hardware/light/2.0/ILight.h",
+        "android/hardware/light/2.0/IHwLight.h",
+        "android/hardware/light/2.0/BnLight.h",
+        "android/hardware/light/2.0/BpLight.h",
+        "android/hardware/light/2.0/BsLight.h",
+    ],
+}
+
+cc_library_shared {
+    name: "android.hardware.light@2.0",
+    generated_sources: ["android.hardware.light@2.0_genc++"],
+    generated_headers: ["android.hardware.light@2.0_genc++_headers"],
+    export_generated_headers: ["android.hardware.light@2.0_genc++_headers"],
+    shared_libs: [
+        "libhidl",
+        "libhwbinder",
+        "libutils",
+        "libcutils",
+    ],
+}
diff --git a/light/2.0/Android.mk b/light/2.0/Android.mk
new file mode 100644
index 0000000..8dc83f0
--- /dev/null
+++ b/light/2.0/Android.mk
@@ -0,0 +1,238 @@
+# This file is autogenerated by hidl-gen. Do not edit manually.
+
+LOCAL_PATH := $(call my-dir)
+
+################################################################################
+
+include $(CLEAR_VARS)
+LOCAL_MODULE := android.hardware.light@2.0-java
+LOCAL_MODULE_CLASS := JAVA_LIBRARIES
+
+intermediates := $(local-generated-sources-dir)
+
+HIDL := $(HOST_OUT_EXECUTABLES)/hidl-gen$(HOST_EXECUTABLE_SUFFIX)
+
+#
+# Build types.hal (Brightness)
+#
+GEN := $(intermediates)/android/hardware/light/2.0/Brightness.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.light@2.0::types.Brightness
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (Flash)
+#
+GEN := $(intermediates)/android/hardware/light/2.0/Flash.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.light@2.0::types.Flash
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (LightState)
+#
+GEN := $(intermediates)/android/hardware/light/2.0/LightState.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.light@2.0::types.LightState
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (Status)
+#
+GEN := $(intermediates)/android/hardware/light/2.0/Status.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.light@2.0::types.Status
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (Type)
+#
+GEN := $(intermediates)/android/hardware/light/2.0/Type.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.light@2.0::types.Type
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build ILight.hal
+#
+GEN := $(intermediates)/android/hardware/light/2.0/ILight.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/ILight.hal
+$(GEN): PRIVATE_DEPS += $(LOCAL_PATH)/types.hal
+$(GEN): $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.light@2.0::ILight
+
+$(GEN): $(LOCAL_PATH)/ILight.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+include $(BUILD_JAVA_LIBRARY)
+
+
+################################################################################
+
+include $(CLEAR_VARS)
+LOCAL_MODULE := android.hardware.light@2.0-java-static
+LOCAL_MODULE_CLASS := JAVA_LIBRARIES
+
+intermediates := $(local-generated-sources-dir)
+
+HIDL := $(HOST_OUT_EXECUTABLES)/hidl-gen$(HOST_EXECUTABLE_SUFFIX)
+
+#
+# Build types.hal (Brightness)
+#
+GEN := $(intermediates)/android/hardware/light/2.0/Brightness.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.light@2.0::types.Brightness
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (Flash)
+#
+GEN := $(intermediates)/android/hardware/light/2.0/Flash.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.light@2.0::types.Flash
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (LightState)
+#
+GEN := $(intermediates)/android/hardware/light/2.0/LightState.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.light@2.0::types.LightState
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (Status)
+#
+GEN := $(intermediates)/android/hardware/light/2.0/Status.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.light@2.0::types.Status
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (Type)
+#
+GEN := $(intermediates)/android/hardware/light/2.0/Type.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.light@2.0::types.Type
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build ILight.hal
+#
+GEN := $(intermediates)/android/hardware/light/2.0/ILight.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/ILight.hal
+$(GEN): PRIVATE_DEPS += $(LOCAL_PATH)/types.hal
+$(GEN): $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.light@2.0::ILight
+
+$(GEN): $(LOCAL_PATH)/ILight.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+include $(BUILD_STATIC_JAVA_LIBRARY)
+
+
+
+include $(call all-makefiles-under,$(LOCAL_PATH))
diff --git a/light/2.0/ILight.hal b/light/2.0/ILight.hal
new file mode 100644
index 0000000..a7cd684
--- /dev/null
+++ b/light/2.0/ILight.hal
@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.light@2.0;
+
+interface ILight {
+
+    /**
+     * Set the provided lights to the provided values.
+     *
+     * @param type logical light to set
+     * @param state describes what the light should look like.
+     * @return status result of applying state transformation.
+     */
+    setLight(Type type, LightState state) generates (Status status);
+
+    /**
+     * Discover what indicator lights are available.
+     *
+     * @return types list of available lights
+     */
+    getSupportedTypes() generates (vec<Type> types);
+
+};
diff --git a/light/2.0/default/Android.mk b/light/2.0/default/Android.mk
new file mode 100644
index 0000000..61f4cc9
--- /dev/null
+++ b/light/2.0/default/Android.mk
@@ -0,0 +1,43 @@
+LOCAL_PATH := $(call my-dir)
+
+include $(CLEAR_VARS)
+LOCAL_MODULE := android.hardware.light@2.0-impl
+LOCAL_MODULE_RELATIVE_PATH := hw
+LOCAL_SRC_FILES := \
+    Light.cpp \
+
+LOCAL_SHARED_LIBRARIES := \
+    libhidl \
+    libhwbinder \
+    libutils \
+    liblog \
+    libcutils \
+    libhardware \
+    libbase \
+    libcutils \
+    android.hardware.light@2.0 \
+
+include $(BUILD_SHARED_LIBRARY)
+
+include $(CLEAR_VARS)
+LOCAL_MODULE_RELATIVE_PATH := hw
+LOCAL_MODULE := android.hardware.light@2.0-service
+LOCAL_INIT_RC := android.hardware.light@2.0-service.rc
+LOCAL_SRC_FILES := \
+    service.cpp \
+
+LOCAL_SHARED_LIBRARIES := \
+    liblog \
+    libcutils \
+    libdl \
+    libbase \
+    libutils \
+    libhardware_legacy \
+    libhardware \
+
+LOCAL_SHARED_LIBRARIES += \
+    libhwbinder \
+    libhidl \
+    android.hardware.light@2.0 \
+
+include $(BUILD_EXECUTABLE)
diff --git a/light/2.0/default/Light.cpp b/light/2.0/default/Light.cpp
new file mode 100644
index 0000000..fe94e91
--- /dev/null
+++ b/light/2.0/default/Light.cpp
@@ -0,0 +1,140 @@
+#include "Light.h"
+
+namespace android {
+namespace hardware {
+namespace light {
+namespace V2_0 {
+namespace implementation {
+
+static_assert(LIGHT_FLASH_NONE == static_cast<int>(Flash::NONE),
+    "Flash::NONE must match legacy value.");
+static_assert(LIGHT_FLASH_TIMED == static_cast<int>(Flash::TIMED),
+    "Flash::TIMED must match legacy value.");
+static_assert(LIGHT_FLASH_HARDWARE == static_cast<int>(Flash::HARDWARE),
+    "Flash::HARDWARE must match legacy value.");
+
+static_assert(BRIGHTNESS_MODE_USER == static_cast<int>(Brightness::USER),
+    "Brightness::USER must match legacy value.");
+static_assert(BRIGHTNESS_MODE_SENSOR == static_cast<int>(Brightness::SENSOR),
+    "Brightness::SENSOR must match legacy value.");
+static_assert(BRIGHTNESS_MODE_LOW_PERSISTENCE ==
+    static_cast<int>(Brightness::LOW_PERSISTENCE),
+    "Brightness::LOW_PERSISTENCE must match legacy value.");
+
+Light::Light(std::map<Type, light_device_t*> &&lights)
+  : mLights(std::move(lights)) {}
+
+// Methods from ::android::hardware::light::V2_0::ILight follow.
+Return<Status> Light::setLight(Type type, const LightState& state)  {
+    auto it = mLights.find(type);
+
+    if (it == mLights.end()) {
+        return Status::LIGHT_NOT_SUPPORTED;
+    }
+
+    light_device_t* hwLight = it->second;
+
+    light_state_t legacyState {
+        .color = state.color,
+        .flashMode = static_cast<int>(state.flashMode),
+        .flashOnMS = state.flashOnMs,
+        .flashOffMS = state.flashOffMs,
+        .brightnessMode = static_cast<int>(state.brightnessMode),
+    };
+
+    int ret = hwLight->set_light(hwLight, &legacyState);
+
+    switch (ret) {
+        case -ENOSYS:
+            return Status::BRIGHTNESS_NOT_SUPPORTED;
+        case 0:
+            return Status::SUCCESS;
+        default:
+            return Status::UNKNOWN;
+    }
+}
+
+Return<void> Light::getSupportedTypes(getSupportedTypes_cb _hidl_cb)  {
+    Type *types = new Type[mLights.size()];
+
+    int idx = 0;
+    for(auto const &pair : mLights) {
+        Type type = pair.first;
+
+        types[idx++] = type;
+    }
+
+    {
+        hidl_vec<Type> hidl_types{};
+        hidl_types.setToExternal(types, mLights.size());
+
+        _hidl_cb(hidl_types);
+    }
+
+    delete[] types;
+
+    return Void();
+}
+
+const static std::map<Type, const char*> kLogicalLights = {
+    {Type::BACKLIGHT,     LIGHT_ID_BACKLIGHT},
+    {Type::KEYBOARD,      LIGHT_ID_KEYBOARD},
+    {Type::BUTTONS,       LIGHT_ID_BUTTONS},
+    {Type::BATTERY,       LIGHT_ID_BATTERY},
+    {Type::NOTIFICATIONS, LIGHT_ID_NOTIFICATIONS},
+    {Type::ATTENTION,     LIGHT_ID_ATTENTION},
+    {Type::BLUETOOTH,     LIGHT_ID_BLUETOOTH},
+    {Type::WIFI,          LIGHT_ID_WIFI}
+};
+
+light_device_t* getLightDevice(const char* name) {
+    light_device_t* lightDevice;
+    const hw_module_t* hwModule = NULL;
+
+    int ret = hw_get_module (LIGHTS_HARDWARE_MODULE_ID, &hwModule);
+    if (ret == 0) {
+        ret = hwModule->methods->open(hwModule, name,
+            reinterpret_cast<hw_device_t**>(&lightDevice));
+        if (ret != 0) {
+            ALOGE("light_open %s %s failed: %d", LIGHTS_HARDWARE_MODULE_ID, name, ret);
+        }
+    } else {
+        ALOGE("hw_get_module %s %s failed: %d", LIGHTS_HARDWARE_MODULE_ID, name, ret);
+    }
+
+    if (ret == 0) {
+        return lightDevice;
+    } else {
+        ALOGE("Light passthrough failed to load legacy HAL.");
+        return nullptr;
+    }
+}
+
+ILight* HIDL_FETCH_ILight(const char* /* name */) {
+    std::map<Type, light_device_t*> lights;
+
+    for(auto const &pair : kLogicalLights) {
+        Type type = pair.first;
+        const char* name = pair.second;
+
+        light_device_t* light = getLightDevice(name);
+
+        if (light != nullptr) {
+            lights[type] = light;
+        }
+    }
+
+    if (lights.size() == 0) {
+        // Log information, but still return new Light.
+        // Some devices may not have any lights.
+        ALOGI("Could not open any lights.");
+    }
+
+    return new Light(std::move(lights));
+}
+
+} // namespace implementation
+}  // namespace V2_0
+}  // namespace light
+}  // namespace hardware
+}  // namespace android
diff --git a/light/2.0/default/Light.h b/light/2.0/default/Light.h
new file mode 100644
index 0000000..b32a09a
--- /dev/null
+++ b/light/2.0/default/Light.h
@@ -0,0 +1,46 @@
+#ifndef HIDL_GENERATED_android_hardware_light_V2_0_Light_H_
+#define HIDL_GENERATED_android_hardware_light_V2_0_Light_H_
+
+#include <android/hardware/light/2.0/ILight.h>
+#include <hardware/hardware.h>
+#include <hardware/lights.h>
+#include <hidl/Status.h>
+#include <hidl/MQDescriptor.h>
+#include <map>
+
+namespace android {
+namespace hardware {
+namespace light {
+namespace V2_0 {
+namespace implementation {
+
+using ::android::hardware::light::V2_0::ILight;
+using ::android::hardware::light::V2_0::LightState;
+using ::android::hardware::light::V2_0::Status;
+using ::android::hardware::light::V2_0::Type;
+using ::android::hardware::Return;
+using ::android::hardware::Void;
+using ::android::hardware::hidl_vec;
+using ::android::hardware::hidl_string;
+using ::android::sp;
+
+struct Light : public ILight {
+    Light(std::map<Type, light_device_t*> &&lights);
+
+    // Methods from ::android::hardware::light::V2_0::ILight follow.
+    Return<Status> setLight(Type type, const LightState& state)  override;
+    Return<void> getSupportedTypes(getSupportedTypes_cb _hidl_cb)  override;
+
+private:
+    std::map<Type, light_device_t*> mLights;
+};
+
+extern "C" ILight* HIDL_FETCH_ILight(const char* name);
+
+}  // namespace implementation
+}  // namespace V2_0
+}  // namespace light
+}  // namespace hardware
+}  // namespace android
+
+#endif  // HIDL_GENERATED_android_hardware_light_V2_0_Light_H_
diff --git a/light/2.0/default/android.hardware.light@2.0-service.rc b/light/2.0/default/android.hardware.light@2.0-service.rc
new file mode 100644
index 0000000..4228d95
--- /dev/null
+++ b/light/2.0/default/android.hardware.light@2.0-service.rc
@@ -0,0 +1,4 @@
+service light-hal-2-0 /system/bin/hw/android.hardware.light@2.0-service
+    class hal
+    user system
+    group system readproc
\ No newline at end of file
diff --git a/light/2.0/default/service.cpp b/light/2.0/default/service.cpp
new file mode 100644
index 0000000..582d224
--- /dev/null
+++ b/light/2.0/default/service.cpp
@@ -0,0 +1,46 @@
+#define LOG_TAG "android.hardware.light@2.0-service"
+#include <utils/Log.h>
+
+#include <iostream>
+#include <unistd.h>
+
+#include <android/hardware/light/2.0/ILight.h>
+
+#include <hidl/IServiceManager.h>
+#include <hwbinder/IPCThreadState.h>
+#include <hwbinder/ProcessState.h>
+#include <utils/Errors.h>
+#include <utils/StrongPointer.h>
+
+using android::sp;
+
+// libhwbinder:
+using android::hardware::IPCThreadState;
+using android::hardware::ProcessState;
+
+// Generated HIDL files
+using android::hardware::light::V2_0::ILight;
+
+int main() {
+    ALOGI("Service is starting.");
+    const char instance[] = "light";
+    ALOGI("Retrieving default implementation of instance %s.",
+          instance);
+
+    android::sp<ILight> service = ILight::getService(instance, true);
+
+    if (service.get() == nullptr) {
+        ALOGE("ILight::getService returned NULL, exiting");
+        return -1;
+    }
+
+    LOG_FATAL_IF(service->isRemote(), "Implementation is REMOTE!");
+
+    ALOGI("Registering instance %s.", instance);
+    service->registerAsService(instance);
+    ALOGI("Ready.");
+
+    ProcessState::self()->setThreadPoolMaxThreadCount(0);
+    ProcessState::self()->startThreadPool();
+    IPCThreadState::self()->joinThreadPool();
+}
diff --git a/light/2.0/types.hal b/light/2.0/types.hal
new file mode 100644
index 0000000..f065ce0
--- /dev/null
+++ b/light/2.0/types.hal
@@ -0,0 +1,134 @@
+/*
+ * Copyright (C) 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.light@2.0;
+
+enum Status : int32_t {
+    SUCCESS,
+    LIGHT_NOT_SUPPORTED,
+    BRIGHTNESS_NOT_SUPPORTED,
+    UNKNOWN,
+};
+
+enum Flash : int32_t {
+    /*
+     * Keep the light steady on or off.
+     */
+    NONE,
+
+    /*
+     * Flash the light at specified rate.
+     */
+    TIMED,
+
+    /*
+     * Flash the light using hardware assist.
+     */
+    HARDWARE,
+};
+
+enum Brightness : int32_t {
+    /**
+     * Light brightness is managed by a user setting.
+     */
+    USER,
+
+    /**
+     * Light brightness is managed by a light sensor.
+     */
+    SENSOR,
+
+    /**
+     * Use a low-persistence mode for display backlights.
+     *
+     * When set, the device driver must switch to a mode optimized for low display
+     * persistence that is intended to be used when the device is being treated as a
+     * head mounted display (HMD). The actual display brightness in this mode is
+     * implementation dependent, and any value set for color in light_state may be
+     * overridden by the HAL implementation.
+     *
+     * For an optimal HMD viewing experience, the display must meet the following
+     * criteria in this mode:
+     * - Gray-to-Gray, White-to-Black, and Black-to-White switching time must be ≤ 3 ms.
+     * - The display must support low-persistence with ≤ 3.5 ms persistence.
+     *   Persistence is defined as the amount of time for which a pixel is
+     *   emitting light for a single frame.
+     * - Any "smart panel" or other frame buffering options that increase display
+     *   latency are disabled.
+     * - Display brightness is set so that the display is still visible to the user
+     *   under normal indoor lighting.
+     * - The display must update at 60 Hz at least, but higher refresh rates are
+     *   recommended for low latency.
+     *
+     */
+    LOW_PERSISTENCE,
+};
+
+/*
+ * These light IDs correspond to logical lights, not physical.
+ * So for example, if your INDICATOR light is in line with your
+ * BUTTONS, it might make sense to also light the INDICATOR
+ * light to a reasonable color when the BUTTONS are lit.
+ */
+enum Type : int32_t {
+    BACKLIGHT,
+    KEYBOARD,
+    BUTTONS,
+    BATTERY,
+    NOTIFICATIONS,
+    ATTENTION,
+    BLUETOOTH,
+    WIFI,
+
+    COUNT,
+};
+
+/**
+ * The parameters that can be set for a given light.
+ *
+ * Not all lights must support all parameters. If you
+ * can do something backward-compatible, do it.
+ */
+struct LightState {
+    /**
+     * The color of the LED in ARGB.
+     *
+     * Do your best here.
+     *   - If your light can only do red or green, if they ask for blue,
+     *     you should do green.
+     *   - If you can only do a brightness ramp, then use this formula:
+     *      unsigned char brightness = ((77*((color>>16)&0x00ff))
+     *              + (150*((color>>8)&0x00ff)) + (29*(color&0x00ff))) >> 8;
+     *   - If you can only do on or off, 0 is off, anything else is on.
+     *
+     * The high byte should be ignored. Callers will set it to 0xff (which
+     * would correspond to 255 alpha).
+     */
+    uint32_t color;
+
+    /**
+     * To flash the light at a given rate, set flashMode to LIGHT_FLASH_TIMED,
+     * and then flashOnMS should be set to the number of milliseconds to turn
+     * the light on, followed by the number of milliseconds to turn the light
+     * off.
+     */
+    Flash flashMode;
+
+    int32_t flashOnMs;
+    int32_t flashOffMs;
+
+    Brightness brightnessMode;
+};
diff --git a/memtrack/1.0/Android.bp b/memtrack/1.0/Android.bp
new file mode 100644
index 0000000..3696aea
--- /dev/null
+++ b/memtrack/1.0/Android.bp
@@ -0,0 +1,46 @@
+// This file is autogenerated by hidl-gen. Do not edit manually.
+
+genrule {
+    name: "android.hardware.memtrack@1.0_genc++",
+    tool: "hidl-gen",
+    cmd: "$tool -o $genDir -Lc++ -randroid.hardware:hardware/interfaces android.hardware.memtrack@1.0",
+    srcs: [
+        "types.hal",
+        "IMemtrack.hal",
+    ],
+    out: [
+        "android/hardware/memtrack/1.0/types.cpp",
+        "android/hardware/memtrack/1.0/MemtrackAll.cpp",
+    ],
+}
+
+genrule {
+    name: "android.hardware.memtrack@1.0_genc++_headers",
+    tool: "hidl-gen",
+    cmd: "$tool -o $genDir -Lc++ -randroid.hardware:hardware/interfaces android.hardware.memtrack@1.0",
+    srcs: [
+        "types.hal",
+        "IMemtrack.hal",
+    ],
+    out: [
+        "android/hardware/memtrack/1.0/types.h",
+        "android/hardware/memtrack/1.0/IMemtrack.h",
+        "android/hardware/memtrack/1.0/IHwMemtrack.h",
+        "android/hardware/memtrack/1.0/BnMemtrack.h",
+        "android/hardware/memtrack/1.0/BpMemtrack.h",
+        "android/hardware/memtrack/1.0/BsMemtrack.h",
+    ],
+}
+
+cc_library_shared {
+    name: "android.hardware.memtrack@1.0",
+    generated_sources: ["android.hardware.memtrack@1.0_genc++"],
+    generated_headers: ["android.hardware.memtrack@1.0_genc++_headers"],
+    export_generated_headers: ["android.hardware.memtrack@1.0_genc++_headers"],
+    shared_libs: [
+        "libhidl",
+        "libhwbinder",
+        "libutils",
+        "libcutils",
+    ],
+}
diff --git a/memtrack/1.0/Android.mk b/memtrack/1.0/Android.mk
new file mode 100644
index 0000000..4abe505
--- /dev/null
+++ b/memtrack/1.0/Android.mk
@@ -0,0 +1,204 @@
+# This file is autogenerated by hidl-gen. Do not edit manually.
+
+LOCAL_PATH := $(call my-dir)
+
+################################################################################
+
+include $(CLEAR_VARS)
+LOCAL_MODULE := android.hardware.memtrack@1.0-java
+LOCAL_MODULE_CLASS := JAVA_LIBRARIES
+
+intermediates := $(local-generated-sources-dir)
+
+HIDL := $(HOST_OUT_EXECUTABLES)/hidl-gen$(HOST_EXECUTABLE_SUFFIX)
+
+#
+# Build types.hal (MemtrackFlag)
+#
+GEN := $(intermediates)/android/hardware/memtrack/1.0/MemtrackFlag.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.memtrack@1.0::types.MemtrackFlag
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (MemtrackRecord)
+#
+GEN := $(intermediates)/android/hardware/memtrack/1.0/MemtrackRecord.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.memtrack@1.0::types.MemtrackRecord
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (MemtrackStatus)
+#
+GEN := $(intermediates)/android/hardware/memtrack/1.0/MemtrackStatus.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.memtrack@1.0::types.MemtrackStatus
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (MemtrackType)
+#
+GEN := $(intermediates)/android/hardware/memtrack/1.0/MemtrackType.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.memtrack@1.0::types.MemtrackType
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build IMemtrack.hal
+#
+GEN := $(intermediates)/android/hardware/memtrack/1.0/IMemtrack.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/IMemtrack.hal
+$(GEN): PRIVATE_DEPS += $(LOCAL_PATH)/types.hal
+$(GEN): $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.memtrack@1.0::IMemtrack
+
+$(GEN): $(LOCAL_PATH)/IMemtrack.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+include $(BUILD_JAVA_LIBRARY)
+
+
+################################################################################
+
+include $(CLEAR_VARS)
+LOCAL_MODULE := android.hardware.memtrack@1.0-java-static
+LOCAL_MODULE_CLASS := JAVA_LIBRARIES
+
+intermediates := $(local-generated-sources-dir)
+
+HIDL := $(HOST_OUT_EXECUTABLES)/hidl-gen$(HOST_EXECUTABLE_SUFFIX)
+
+#
+# Build types.hal (MemtrackFlag)
+#
+GEN := $(intermediates)/android/hardware/memtrack/1.0/MemtrackFlag.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.memtrack@1.0::types.MemtrackFlag
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (MemtrackRecord)
+#
+GEN := $(intermediates)/android/hardware/memtrack/1.0/MemtrackRecord.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.memtrack@1.0::types.MemtrackRecord
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (MemtrackStatus)
+#
+GEN := $(intermediates)/android/hardware/memtrack/1.0/MemtrackStatus.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.memtrack@1.0::types.MemtrackStatus
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (MemtrackType)
+#
+GEN := $(intermediates)/android/hardware/memtrack/1.0/MemtrackType.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.memtrack@1.0::types.MemtrackType
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build IMemtrack.hal
+#
+GEN := $(intermediates)/android/hardware/memtrack/1.0/IMemtrack.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/IMemtrack.hal
+$(GEN): PRIVATE_DEPS += $(LOCAL_PATH)/types.hal
+$(GEN): $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.memtrack@1.0::IMemtrack
+
+$(GEN): $(LOCAL_PATH)/IMemtrack.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+include $(BUILD_STATIC_JAVA_LIBRARY)
+
+
+
+include $(call all-makefiles-under,$(LOCAL_PATH))
diff --git a/memtrack/1.0/IMemtrack.hal b/memtrack/1.0/IMemtrack.hal
new file mode 100644
index 0000000..064f2fe
--- /dev/null
+++ b/memtrack/1.0/IMemtrack.hal
@@ -0,0 +1,68 @@
+/*
+ * Copyright (C) 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.memtrack@1.0;
+
+/*
+ * The Memory Tracker HAL is designed to return information about
+ * device-specific memory usage.
+ * The primary goal is to be able to track memory that is not
+ * trackable in any other way, for example texture memory that is allocated by
+ * a process, but not mapped in to that process's address space.
+ * A secondary goal is to be able to categorize memory used by a process into
+ * GL, graphics, etc. All memory sizes must be in real memory usage,
+ * accounting for stride, bit depth, rounding up to page size, etc.
+ *
+ * Constructor for the interface should be used to perform memtrack management
+ * setup actions and is called once before any calls to getMemory().
+ */
+interface IMemtrack {
+    /*
+     * getMemory() populates MemtrackRecord vector with the sizes of memory
+     * plus associated flags for that memory.
+     *
+     * This function must be thread-safe, it may get called from multiple
+     * threads at the same time.
+     *
+     * A process collecting memory statistics will call getMemory for each
+     * combination of pid and memory type. For each memory type that it
+     * recognizes, the HAL must fill out an array of memtrack_record
+     * structures breaking down the statistics of that memory type as much as
+     * possible. For example,
+     * getMemory(<pid>, GL) might return:
+     * { { 4096,  ACCOUNTED | PRIVATE | SYSTEM },
+     *   { 40960, UNACCOUNTED | PRIVATE | SYSTEM },
+     *   { 8192,  ACCOUNTED | PRIVATE | DEDICATED },
+     *   { 8192,  UNACCOUNTED | PRIVATE | DEDICATED } }
+     * If the HAL cannot differentiate between SYSTEM and DEDICATED memory, it
+     * could return:
+     * { { 12288,  ACCOUNTED | PRIVATE },
+     *   { 49152,  UNACCOUNTED | PRIVATE } }
+     *
+     * Memory must not overlap between types. For example, a graphics buffer
+     * that has been mapped into the GPU as a surface must show up when
+     * GRAPHICS is requested and not when GL
+     * is requested.
+     *
+     * @param pid process for which memory infromation is requested
+     * @param type memory type that information is being requested about
+     * @return records vector of MemtrackRecord containing memory information
+     * @return retval SUCCESS on success, TYPE_NOT_FOUND if the type is not
+     * supported.
+     */
+    getMemory(int32_t pid, MemtrackType type)
+            generates (MemtrackStatus retval, vec<MemtrackRecord> records);
+};
diff --git a/memtrack/1.0/default/Android.bp b/memtrack/1.0/default/Android.bp
new file mode 100644
index 0000000..c6ab6b9
--- /dev/null
+++ b/memtrack/1.0/default/Android.bp
@@ -0,0 +1,48 @@
+// Copyright (C) 2016 The Android Open Source Project
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//      http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+cc_library_shared {
+    name: "android.hardware.memtrack@1.0-impl",
+    relative_install_path: "hw",
+    srcs: ["Memtrack.cpp"],
+
+    shared_libs: [
+        "libbase",
+        "liblog",
+        "libhidl",
+        "libhardware",
+        "libhwbinder",
+        "libutils",
+        "android.hardware.memtrack@1.0",
+    ],
+
+}
+
+cc_binary {
+    relative_install_path: "hw",
+    name: "android.hardware.memtrack@1.0-service",
+    srcs: ["service.cpp"],
+
+    shared_libs: [
+        "liblog",
+        "libbase",
+        "libdl",
+        "libutils",
+        "libhardware",
+        "libhidl",
+        "libhwbinder",
+        "android.hardware.memtrack@1.0",
+    ],
+
+}
diff --git a/memtrack/1.0/default/Memtrack.cpp b/memtrack/1.0/default/Memtrack.cpp
new file mode 100644
index 0000000..b953e7c
--- /dev/null
+++ b/memtrack/1.0/default/Memtrack.cpp
@@ -0,0 +1,98 @@
+/*
+ * Copyright (C) 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#define LOG_TAG "android.hardware.memtrack@1.0-impl"
+#include <hardware/hardware.h>
+#include <hardware/memtrack.h>
+
+#include "Memtrack.h"
+namespace android {
+namespace hardware {
+namespace memtrack {
+namespace V1_0 {
+namespace implementation {
+
+Memtrack::Memtrack(memtrack_module_t *module) : mModule(module) {
+    if (mModule)
+        mModule->init(mModule);
+}
+
+Memtrack::~Memtrack() {
+    delete(mModule);
+}
+
+Return<void> Memtrack::getMemory(int32_t pid, MemtrackType type,
+        getMemory_cb _hidl_cb)  {
+    hidl_vec<MemtrackRecord> records;
+    size_t temp = 0;
+    size_t *size = &temp;
+    int ret = 0;
+
+    if (mModule->getMemory == nullptr)
+    {
+        _hidl_cb(MemtrackStatus::SUCCESS, records);
+        return Void();
+    }
+    ret = mModule->getMemory(mModule, pid, static_cast<memtrack_type>(type),
+            NULL, size);
+    if (ret == 0)
+    {
+        memtrack_record *legacy_records = new memtrack_record[*size];
+        ret = mModule->getMemory(mModule, pid,
+                static_cast<memtrack_type>(type), legacy_records, size);
+        if (ret == 0)
+        {
+            records.resize(*size);
+            for(size_t i = 0; i < *size; i++)
+            {
+                records[i].sizeInBytes = legacy_records[i].size_in_bytes;
+                records[i].flags = legacy_records[i].flags;
+            }
+        }
+        delete[] legacy_records;
+    }
+    _hidl_cb(MemtrackStatus::SUCCESS, records);
+    return Void();
+}
+
+
+IMemtrack* HIDL_FETCH_IMemtrack(const char* name) {
+    int ret = 0;
+    const hw_module_t* hw_module = NULL;
+    memtrack_module_t *memtrack_module = NULL;
+
+    ret = hw_get_module(name, &hw_module);
+    if (ret == 0 && hw_module->methods->open > 0)
+    {
+        ret = hw_module->methods->open(hw_module, name,
+                reinterpret_cast<hw_device_t**>(&memtrack_module));
+        if (ret == 0)
+                return new Memtrack(memtrack_module);
+        else {
+            ALOGE("Passthrough failed to load legacy HAL.");
+        }
+    }
+    else {
+        ALOGE ("hw_get_module %s failed: %d", name, ret);
+    }
+    return nullptr;
+}
+
+} // namespace implementation
+}  // namespace V1_0
+}  // namespace memtrack
+}  // namespace hardware
+}  // namespace android
diff --git a/memtrack/1.0/default/Memtrack.h b/memtrack/1.0/default/Memtrack.h
new file mode 100644
index 0000000..86dae72
--- /dev/null
+++ b/memtrack/1.0/default/Memtrack.h
@@ -0,0 +1,57 @@
+/*
+ * Copyright (C) 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef HIDL_GENERATED_android_hardware_memtrack_V1_0_Memtrack_H_
+#define HIDL_GENERATED_android_hardware_memtrack_V1_0_Memtrack_H_
+
+#include <android/hardware/memtrack/1.0/IMemtrack.h>
+#include <hidl/Status.h>
+
+#include <hidl/MQDescriptor.h>
+namespace android {
+namespace hardware {
+namespace memtrack {
+namespace V1_0 {
+namespace implementation {
+
+using ::android::hardware::memtrack::V1_0::IMemtrack;
+using ::android::hardware::memtrack::V1_0::MemtrackRecord;
+using ::android::hardware::memtrack::V1_0::MemtrackStatus;
+using ::android::hardware::memtrack::V1_0::MemtrackType;
+using ::android::hardware::Return;
+using ::android::hardware::Void;
+using ::android::hardware::hidl_vec;
+using ::android::hardware::hidl_string;
+using ::android::sp;
+
+struct Memtrack : public IMemtrack {
+    Memtrack(memtrack_module_t* module);
+    ~Memtrack();
+    Return<void> getMemory(int32_t pid, MemtrackType type, getMemory_cb _hidl_cb)  override;
+
+  private:
+    memtrack_module_t* mModule;
+};
+
+extern "C" IMemtrack* HIDL_FETCH_IMemtrack(const char* name);
+
+}  // namespace implementation
+}  // namespace V1_0
+}  // namespace memtrack
+}  // namespace hardware
+}  // namespace android
+
+#endif  // HIDL_GENERATED_android_hardware_memtrack_V1_0_Memtrack_H_
diff --git a/memtrack/1.0/default/service.cpp b/memtrack/1.0/default/service.cpp
new file mode 100644
index 0000000..63ac695
--- /dev/null
+++ b/memtrack/1.0/default/service.cpp
@@ -0,0 +1,51 @@
+/*
+ * Copyright (C) 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#define LOG_TAG "android.hardware.memtrack@1.0-service"
+#include <utils/Log.h>
+
+#include <iostream>
+#include <unistd.h>
+
+#include <android/hardware/memtrack/1.0/IMemtrack.h>
+
+#include <hidl/IServiceManager.h>
+#include <hwbinder/IPCThreadState.h>
+#include <hwbinder/ProcessState.h>
+#include <utils/Errors.h>
+#include <utils/StrongPointer.h>
+
+using android::sp;
+
+using android::hardware::IPCThreadState;
+using android::hardware::ProcessState;
+
+using android::hardware::memtrack::V1_0::IMemtrack;
+
+int main() {
+    const char instance[] = "memtrack";
+    android::sp<IMemtrack> service = IMemtrack::getService(instance, true);
+    if (service.get() == nullptr) {
+        ALOGE("IMemtrack::getService returned NULL, exiting");
+        return -1;
+    }
+    LOG_FATAL_IF(service->isRemote(), "Implementation is REMOTE!");
+    service->registerAsService(instance);
+
+    ProcessState::self()->setThreadPoolMaxThreadCount(0);
+    ProcessState::self()->startThreadPool();
+    IPCThreadState::self()->joinThreadPool();
+}
diff --git a/memtrack/1.0/types.hal b/memtrack/1.0/types.hal
new file mode 100644
index 0000000..3d702b3
--- /dev/null
+++ b/memtrack/1.0/types.hal
@@ -0,0 +1,87 @@
+/*
+ * Copyright (C) 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.memtrack@1.0;
+
+/*
+ * SMAPS_ACCOUNTED/SMAPS_UNACCOUNTED
+ * Flags to differentiate memory that can already be accounted for in
+ * /proc/<pid>/smaps,
+ * (Shared_Clean + Shared_Dirty + Private_Clean + Private_Dirty = Size).
+ * In general, memory mapped in to a userspace process is accounted unless
+ * it was mapped with remap_pfn_range.
+ * Exactly one of these must be set.
+ *
+ * SHARED/SHARED_PSS/PRIVATE
+ * Flags to differentiate memory shared across multiple processes vs. memory
+ * used by a single process.
+ * If SHARED_PSS flags is used, the memory must be divided by the number of
+ * processes holding reference to it (shared / num_processes).
+ * Only zero or one of these may be set in a record.
+ * If none are set, record is assumed to count shared + private memory.
+ *
+ * SYSTEM/DEDICATED
+ * Flags to differentiate memory taken from the kernel's allocation pool vs.
+ * memory that is dedicated to non-kernel allocations, for example a carveout
+ * or separate video memory.  Only zero or one of these may be set in a record.
+ * If none are set, record is assumed to count system + dedicated memory.
+ *
+ * NONSECURE/SECURE
+ * Flags to differentiate memory accessible by the CPU in non-secure mode vs.
+ * memory that is protected.  Only zero or one of these may be set in a record.
+ * If none are set, record is assumed to count secure + nonsecure memory.
+ */
+enum MemtrackFlag : uint32_t {
+    SMAPS_ACCOUNTED = 1 << 1,
+    SMAPS_UNACCOUNTED = 1 << 2,
+    SHARED = 1 << 3,
+    SHARED_PSS = 1 << 4,
+    PRIVATE = 1 << 5,
+    SYSTEM = 1 << 6,
+    DEDICATED = 1 << 7,
+    NONSECURE = 1 << 8,
+    SECURE = 1 << 9,
+};
+
+/* Tags which define the usage of the memory buffers. */
+enum MemtrackType : uint32_t {
+    OTHER = 0,
+    GL = 1,
+    GRAPHICS = 2,
+    MULTIMEDIA = 3,
+    CAMERA = 4,
+    NUM_TYPES,
+};
+
+enum MemtrackStatus : uint32_t {
+    SUCCESS = 0,
+    MEMORY_TRACKING_NOT_SUPPORTED = 1,
+    TYPE_NOT_SUPPORTED = 2,
+};
+
+/* A vector of MemtrackRecord is returned by the function getMemory().
+ * Each record consists of the size of the memory used by the process and
+ * flags indicate the all the MemtrackFlag that are valid for this record.
+ * see getMemory() comments for further details.
+ */
+struct MemtrackRecord {
+    uint64_t sizeInBytes;
+    /*
+     * This is the bitfield for the MemtrackFlag indicating all the flags that
+     * are valid for this record.
+     */
+    uint32_t flags;
+};
diff --git a/nfc/1.0/default/Nfc.cpp b/nfc/1.0/default/Nfc.cpp
index b836ada..d3868c1 100644
--- a/nfc/1.0/default/Nfc.cpp
+++ b/nfc/1.0/default/Nfc.cpp
@@ -19,19 +19,19 @@
 // Methods from ::android::hardware::nfc::V1_0::INfc follow.
 ::android::hardware::Return<int32_t> Nfc::open(const sp<INfcClientCallback>& clientCallback)  {
     mCallback = clientCallback;
-    return mDevice->open(mDevice, event_callback, data_callback);
+    return mDevice->open(mDevice, eventCallback, dataCallback);
 }
 
-::android::hardware::Return<int32_t> Nfc::write(const nfc_data_t& data)  {
-    return mDevice->write(mDevice, data.data.size(), &data.data[0]);
+::android::hardware::Return<int32_t> Nfc::write(const hidl_vec<uint8_t>& data)  {
+    return mDevice->write(mDevice, data.size(), &data[0]);
 }
 
-::android::hardware::Return<int32_t> Nfc::core_initialized(const hidl_vec<uint8_t>& data)  {
+::android::hardware::Return<int32_t> Nfc::coreInitialized(const hidl_vec<uint8_t>& data)  {
     hidl_vec<uint8_t> copy = data;
     return mDevice->core_initialized(mDevice, &copy[0]);
 }
 
-::android::hardware::Return<int32_t> Nfc::pre_discover()  {
+::android::hardware::Return<int32_t> Nfc::prediscover()  {
     return mDevice->pre_discover(mDevice);
 }
 
@@ -39,11 +39,11 @@
     return mDevice->close(mDevice);
 }
 
-::android::hardware::Return<int32_t> Nfc::control_granted()  {
+::android::hardware::Return<int32_t> Nfc::controlGranted()  {
     return mDevice->control_granted(mDevice);
 }
 
-::android::hardware::Return<int32_t> Nfc::power_cycle()  {
+::android::hardware::Return<int32_t> Nfc::powerCycle()  {
     return mDevice->power_cycle(mDevice);
 }
 
diff --git a/nfc/1.0/default/Nfc.h b/nfc/1.0/default/Nfc.h
index 98cd57e..e596495 100644
--- a/nfc/1.0/default/Nfc.h
+++ b/nfc/1.0/default/Nfc.h
@@ -13,7 +13,6 @@
 
 using ::android::hardware::nfc::V1_0::INfc;
 using ::android::hardware::nfc::V1_0::INfcClientCallback;
-using ::android::hardware::nfc::V1_0::nfc_data_t;
 using ::android::hardware::Return;
 using ::android::hardware::Void;
 using ::android::hardware::hidl_vec;
@@ -23,23 +22,23 @@
 struct Nfc : public INfc {
   Nfc(nfc_nci_device_t* device);
   ::android::hardware::Return<int32_t> open(const sp<INfcClientCallback>& clientCallback)  override;
-  ::android::hardware::Return<int32_t> write(const nfc_data_t& data)  override;
-  ::android::hardware::Return<int32_t> core_initialized(const hidl_vec<uint8_t>& data)  override;
-  ::android::hardware::Return<int32_t> pre_discover()  override;
+  ::android::hardware::Return<int32_t> write(const hidl_vec<uint8_t>& data)  override;
+  ::android::hardware::Return<int32_t> coreInitialized(const hidl_vec<uint8_t>& data)  override;
+  ::android::hardware::Return<int32_t> prediscover()  override;
   ::android::hardware::Return<int32_t> close()  override;
-  ::android::hardware::Return<int32_t> control_granted()  override;
-  ::android::hardware::Return<int32_t> power_cycle()  override;
+  ::android::hardware::Return<int32_t> controlGranted()  override;
+  ::android::hardware::Return<int32_t> powerCycle()  override;
 
-  static void event_callback(uint8_t event, uint8_t status) {
+  static void eventCallback(uint8_t event, uint8_t status) {
       if (mCallback != nullptr) {
           mCallback->sendEvent(
-                  (::android::hardware::nfc::V1_0::nfc_event_t) event,
-                  (::android::hardware::nfc::V1_0::nfc_status_t) status);
+                  (::android::hardware::nfc::V1_0::NfcEvent) event,
+                  (::android::hardware::nfc::V1_0::NfcStatus) status);
       }
   }
-  static void data_callback(uint16_t data_len, uint8_t* p_data) {
-      nfc_data_t data;
-      data.data.setToExternal(p_data, data_len);
+  static void dataCallback(uint16_t data_len, uint8_t* p_data) {
+      hidl_vec<uint8_t> data;
+      data.setToExternal(p_data, data_len);
       if (mCallback != nullptr) {
           mCallback->sendData(data);
       }
diff --git a/nfc/1.0/vts/Android.mk b/nfc/1.0/vts/Android.mk
new file mode 100644
index 0000000..6f63e03
--- /dev/null
+++ b/nfc/1.0/vts/Android.mk
@@ -0,0 +1,118 @@
+#
+# Copyright (C) 2016 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+LOCAL_PATH := $(call my-dir)
+
+# build VTS driver for Nfc v1.0.
+include $(CLEAR_VARS)
+
+LOCAL_MODULE := libvts_driver_hidl_nfc@1.0
+
+LOCAL_SRC_FILES := \
+  Nfc.vts \
+  NfcClientCallback.vts \
+  types.vts \
+
+LOCAL_C_INCLUDES := \
+  android.hardware.nfc@1.0 \
+  system/core/base/include \
+  system/core/include \
+
+LOCAL_SHARED_LIBRARIES += \
+  android.hardware.nfc@1.0 \
+  libbase \
+  libutils \
+  libcutils \
+  liblog \
+  libhidl \
+  libhwbinder \
+  libprotobuf-cpp-full \
+  libvts_common \
+  libvts_datatype \
+  libvts_measurement \
+  libvts_multidevice_proto \
+
+LOCAL_CFLAGS += -DENABLE_TREBLE
+
+LOCAL_STATIC_LIBRARIES := \
+
+LOCAL_PROTOC_OPTIMIZE_TYPE := full
+
+LOCAL_MULTILIB := both
+
+include $(BUILD_SHARED_LIBRARY)
+
+# build profiler for Nfc.
+include $(CLEAR_VARS)
+
+LOCAL_MODULE := libvts_profiler_hidl_nfc@1.0
+
+LOCAL_SRC_FILES := \
+   Nfc.vts \
+   types.vts \
+
+LOCAL_C_INCLUDES += \
+  test/vts/drivers/libprofiling \
+
+LOCAL_VTS_MODE := PROFILER
+
+LOCAL_SHARED_LIBRARIES := \
+   android.hardware.nfc@1.0 \
+   libbase \
+   libcutils \
+   liblog \
+   libhidl \
+   libhwbinder \
+   libprotobuf-cpp-full \
+   libvts_common \
+   libvts_multidevice_proto \
+   libvts_profiling \
+   libutils \
+
+LOCAL_PROTOC_OPTIMIZE_TYPE := full
+
+include $(BUILD_SHARED_LIBRARY)
+
+# build profiler for NfcClientCallback.
+include $(CLEAR_VARS)
+
+LOCAL_MODULE := libvts_profiler_hidl_nfc_client_callback_@1.0
+
+LOCAL_SRC_FILES := \
+   NfcClientCallback.vts \
+   types.vts \
+
+LOCAL_C_INCLUDES += \
+  test/vts/drivers/libprofiling \
+
+LOCAL_VTS_MODE := PROFILER
+
+LOCAL_SHARED_LIBRARIES := \
+   android.hardware.nfc@1.0 \
+   libbase \
+   libcutils \
+   liblog \
+   libhidl \
+   libhwbinder \
+   libprotobuf-cpp-full \
+   libvts_common \
+   libvts_multidevice_proto \
+   libvts_profiling \
+   libutils \
+
+LOCAL_PROTOC_OPTIMIZE_TYPE := full
+
+include $(BUILD_SHARED_LIBRARY)
diff --git a/nfc/1.0/vts/Nfc.vts b/nfc/1.0/vts/Nfc.vts
new file mode 100644
index 0000000..8c18653
--- /dev/null
+++ b/nfc/1.0/vts/Nfc.vts
@@ -0,0 +1,87 @@
+component_class: HAL_HIDL
+component_type_version: 1.0
+component_name: "INfc"
+component_type: NFC
+
+package: "android.hardware.nfc"
+
+import: "android.hardware.nfc@1.0::INfcClientCallback"
+import: "android.hardware.nfc@1.0::types"
+
+interface: {
+    api: {
+        name: "open"
+        return_type_hidl: {
+            type: TYPE_SCALAR
+            scalar_type: "int32_t"
+        }
+        arg: {
+            type: TYPE_HIDL_CALLBACK
+            predefined_type: "INfcClientCallback"
+            is_callback: true
+        }
+    }
+
+    api: {
+        name: "write"
+        return_type_hidl: {
+            type: TYPE_SCALAR
+            scalar_type: "int32_t"
+        }
+        arg: {
+            type: TYPE_VECTOR
+            vector_value: {
+                type: TYPE_SCALAR
+                scalar_type: "uint8_t"
+            }
+        }
+    }
+
+    api: {
+        name: "coreInitialized"
+        return_type_hidl: {
+            type: TYPE_SCALAR
+            scalar_type: "int32_t"
+        }
+        arg: {
+            type: TYPE_VECTOR
+            vector_value: {
+                type: TYPE_SCALAR
+                scalar_type: "uint8_t"
+            }
+        }
+    }
+
+    api: {
+        name: "prediscover"
+        return_type_hidl: {
+            type: TYPE_SCALAR
+            scalar_type: "int32_t"
+        }
+    }
+
+    api: {
+        name: "close"
+        return_type_hidl: {
+            type: TYPE_SCALAR
+            scalar_type: "int32_t"
+        }
+    }
+
+    api: {
+        name: "controlGranted"
+        return_type_hidl: {
+            type: TYPE_SCALAR
+            scalar_type: "int32_t"
+        }
+    }
+
+    api: {
+        name: "powerCycle"
+        return_type_hidl: {
+            type: TYPE_SCALAR
+            scalar_type: "int32_t"
+        }
+    }
+
+}
diff --git a/nfc/1.0/vts/NfcClientCallback.vts b/nfc/1.0/vts/NfcClientCallback.vts
new file mode 100644
index 0000000..e468935
--- /dev/null
+++ b/nfc/1.0/vts/NfcClientCallback.vts
@@ -0,0 +1,34 @@
+component_class: HAL_HIDL
+component_type_version: 1.0
+component_name: "INfcClientCallback"
+component_type: NFC
+
+package: "android.hardware.nfc"
+
+import: "android.hardware.nfc@1.0::types"
+
+interface: {
+    api: {
+        name: "sendEvent"
+        arg: {
+            type: TYPE_ENUM
+            predefined_type: "NfcEvent"
+        }
+        arg: {
+            type: TYPE_ENUM
+            predefined_type: "NfcStatus"
+        }
+    }
+
+    api: {
+        name: "sendData"
+        arg: {
+            type: TYPE_VECTOR
+            vector_value: {
+                type: TYPE_SCALAR
+                scalar_type: "uint8_t"
+            }
+        }
+    }
+
+}
diff --git a/nfc/1.0/vts/types.vts b/nfc/1.0/vts/types.vts
new file mode 100644
index 0000000..f56ddf1
--- /dev/null
+++ b/nfc/1.0/vts/types.vts
@@ -0,0 +1,73 @@
+component_class: HAL_HIDL
+component_type_version: 1.0
+component_name: "types"
+component_type: NFC
+
+package: "android.hardware.nfc"
+
+attribute: {
+    name: "NfcEvent"
+    type: TYPE_ENUM
+    enum_value: {
+        scalar_type: "uint32_t"
+
+        enumerator: "OPEN_CPLT"
+        scalar_value: {
+            uint32_t: 0
+        }
+        enumerator: "CLOSE_CPLT"
+        scalar_value: {
+            uint32_t: 1
+        }
+        enumerator: "POST_INIT_CPLT"
+        scalar_value: {
+            uint32_t: 2
+        }
+        enumerator: "PRE_DISCOVER_CPLT"
+        scalar_value: {
+            uint32_t: 3
+        }
+        enumerator: "REQUEST_CONTROL"
+        scalar_value: {
+            uint32_t: 4
+        }
+        enumerator: "RELEASE_CONTROL"
+        scalar_value: {
+            uint32_t: 5
+        }
+        enumerator: "ERROR"
+        scalar_value: {
+            uint32_t: 6
+        }
+    }
+}
+
+attribute: {
+    name: "NfcStatus"
+    type: TYPE_ENUM
+    enum_value: {
+        scalar_type: "uint32_t"
+
+        enumerator: "OK"
+        scalar_value: {
+            uint32_t: 0
+        }
+        enumerator: "FAILED"
+        scalar_value: {
+            uint32_t: 1
+        }
+        enumerator: "ERR_TRANSPORT"
+        scalar_value: {
+            uint32_t: 2
+        }
+        enumerator: "ERR_CMD_TIMEOUT"
+        scalar_value: {
+            uint32_t: 3
+        }
+        enumerator: "REFUSED"
+        scalar_value: {
+            uint32_t: 4
+        }
+    }
+}
+
diff --git a/power/1.0/Android.bp b/power/1.0/Android.bp
new file mode 100644
index 0000000..9b4d81e
--- /dev/null
+++ b/power/1.0/Android.bp
@@ -0,0 +1,46 @@
+// This file is autogenerated by hidl-gen. Do not edit manually.
+
+genrule {
+    name: "android.hardware.power@1.0_genc++",
+    tool: "hidl-gen",
+    cmd: "$tool -o $genDir -Lc++ -randroid.hardware:hardware/interfaces android.hardware.power@1.0",
+    srcs: [
+        "types.hal",
+        "IPower.hal",
+    ],
+    out: [
+        "android/hardware/power/1.0/types.cpp",
+        "android/hardware/power/1.0/PowerAll.cpp",
+    ],
+}
+
+genrule {
+    name: "android.hardware.power@1.0_genc++_headers",
+    tool: "hidl-gen",
+    cmd: "$tool -o $genDir -Lc++ -randroid.hardware:hardware/interfaces android.hardware.power@1.0",
+    srcs: [
+        "types.hal",
+        "IPower.hal",
+    ],
+    out: [
+        "android/hardware/power/1.0/types.h",
+        "android/hardware/power/1.0/IPower.h",
+        "android/hardware/power/1.0/IHwPower.h",
+        "android/hardware/power/1.0/BnPower.h",
+        "android/hardware/power/1.0/BpPower.h",
+        "android/hardware/power/1.0/BsPower.h",
+    ],
+}
+
+cc_library_shared {
+    name: "android.hardware.power@1.0",
+    generated_sources: ["android.hardware.power@1.0_genc++"],
+    generated_headers: ["android.hardware.power@1.0_genc++_headers"],
+    export_generated_headers: ["android.hardware.power@1.0_genc++_headers"],
+    shared_libs: [
+        "libhidl",
+        "libhwbinder",
+        "libutils",
+        "libcutils",
+    ],
+}
diff --git a/power/1.0/Android.mk b/power/1.0/Android.mk
new file mode 100644
index 0000000..5f1260b
--- /dev/null
+++ b/power/1.0/Android.mk
@@ -0,0 +1,238 @@
+# This file is autogenerated by hidl-gen. Do not edit manually.
+
+LOCAL_PATH := $(call my-dir)
+
+################################################################################
+
+include $(CLEAR_VARS)
+LOCAL_MODULE := android.hardware.power@1.0-java
+LOCAL_MODULE_CLASS := JAVA_LIBRARIES
+
+intermediates := $(local-generated-sources-dir)
+
+HIDL := $(HOST_OUT_EXECUTABLES)/hidl-gen$(HOST_EXECUTABLE_SUFFIX)
+
+#
+# Build types.hal (Feature)
+#
+GEN := $(intermediates)/android/hardware/power/1.0/Feature.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.power@1.0::types.Feature
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (PowerHint)
+#
+GEN := $(intermediates)/android/hardware/power/1.0/PowerHint.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.power@1.0::types.PowerHint
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (PowerStatePlatformSleepState)
+#
+GEN := $(intermediates)/android/hardware/power/1.0/PowerStatePlatformSleepState.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.power@1.0::types.PowerStatePlatformSleepState
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (PowerStateVoter)
+#
+GEN := $(intermediates)/android/hardware/power/1.0/PowerStateVoter.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.power@1.0::types.PowerStateVoter
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (Status)
+#
+GEN := $(intermediates)/android/hardware/power/1.0/Status.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.power@1.0::types.Status
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build IPower.hal
+#
+GEN := $(intermediates)/android/hardware/power/1.0/IPower.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/IPower.hal
+$(GEN): PRIVATE_DEPS += $(LOCAL_PATH)/types.hal
+$(GEN): $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.power@1.0::IPower
+
+$(GEN): $(LOCAL_PATH)/IPower.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+include $(BUILD_JAVA_LIBRARY)
+
+
+################################################################################
+
+include $(CLEAR_VARS)
+LOCAL_MODULE := android.hardware.power@1.0-java-static
+LOCAL_MODULE_CLASS := JAVA_LIBRARIES
+
+intermediates := $(local-generated-sources-dir)
+
+HIDL := $(HOST_OUT_EXECUTABLES)/hidl-gen$(HOST_EXECUTABLE_SUFFIX)
+
+#
+# Build types.hal (Feature)
+#
+GEN := $(intermediates)/android/hardware/power/1.0/Feature.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.power@1.0::types.Feature
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (PowerHint)
+#
+GEN := $(intermediates)/android/hardware/power/1.0/PowerHint.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.power@1.0::types.PowerHint
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (PowerStatePlatformSleepState)
+#
+GEN := $(intermediates)/android/hardware/power/1.0/PowerStatePlatformSleepState.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.power@1.0::types.PowerStatePlatformSleepState
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (PowerStateVoter)
+#
+GEN := $(intermediates)/android/hardware/power/1.0/PowerStateVoter.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.power@1.0::types.PowerStateVoter
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (Status)
+#
+GEN := $(intermediates)/android/hardware/power/1.0/Status.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.power@1.0::types.Status
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build IPower.hal
+#
+GEN := $(intermediates)/android/hardware/power/1.0/IPower.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/IPower.hal
+$(GEN): PRIVATE_DEPS += $(LOCAL_PATH)/types.hal
+$(GEN): $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.power@1.0::IPower
+
+$(GEN): $(LOCAL_PATH)/IPower.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+include $(BUILD_STATIC_JAVA_LIBRARY)
+
+
+
+include $(call all-makefiles-under,$(LOCAL_PATH))
diff --git a/power/1.0/IPower.hal b/power/1.0/IPower.hal
new file mode 100644
index 0000000..6cba42a
--- /dev/null
+++ b/power/1.0/IPower.hal
@@ -0,0 +1,89 @@
+/*
+ * Copyright (C) 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+package android.hardware.power@1.0;
+
+/*
+ * Constructor for the interface performs power management setup actions at
+ * runtime startup, such as to set default cpufreq parameters.
+ */
+interface IPower {
+    /*
+     * setInteractive() performs power management actions upon the
+     * system entering interactive state (that is, the system is awake
+     * and ready for interaction, often with UI devices such as
+     * display and touchscreen enabled) or non-interactive state (the
+     * system appears asleep, display usually turned off). The
+     * non-interactive state may be entered after a period of
+     * inactivity in order to conserve battery power during
+     * such inactive periods.
+     *
+     * Typical actions are to turn on or off devices and adjust
+     * cpufreq parameters. This function may also call the
+     * appropriate interfaces to allow the kernel to suspend the
+     * system to low-power sleep state when entering non-interactive
+     * state, and to disallow low-power suspend when the system is in
+     * interactive state. When low-power suspend state is allowed, the
+     * kernel may suspend the system whenever no wakelocks are held.
+     *
+     * For example,
+     * This function can be called to enter non-interactive state after
+     * turning off the screen (if present) and called to enter
+     * interactive state prior to turning on the screen.
+     *
+     * @param interactive is true when the system is transitioning to an
+     * interactive state and false when transitioning to a
+     * non-interactive state.
+     */
+    setInteractive(bool interactive);
+
+    /*
+     * powerHint() is called to pass hints on power requirements which
+     * may result in adjustment of power/performance parameters of the
+     * cpufreq governor and other controls.
+     *
+     * A particular platform may choose to ignore any hint.
+     *
+     * @param hint PowerHint which is passed
+     * @param data contains additional information about the hint
+     * and is described along with the comments for each of the hints.
+     */
+    powerHint(PowerHint hint, int32_t data);
+
+    /*
+     * setFeature() is called to turn on or off a particular feature
+     * depending on the state parameter.
+     *
+     * @param feature Feature which needs to be set
+     * @param activate true/false to enable/disable the feature
+     */
+    setFeature(Feature feature, bool activate);
+
+    /*
+     * Platform-level sleep state stats:
+     * Report cumulative info on the statistics on platform-level sleep states
+     * since boot.
+     *
+     * Higher the index in the returned <states> vector deeper the state is
+     * i.e. lesser steady-state power is consumed by the platform to be
+     * resident in that state.
+     *
+     * @return states of power states the device supports
+     * @return retval SUCCESS on success or FILESYSTEM_ERROR on filesystem
+     * nodes access error.
+     */
+    getPlatformLowPowerStats()
+            generates (vec<PowerStatePlatformSleepState> states, Status retval);
+};
diff --git a/power/1.0/default/Android.bp b/power/1.0/default/Android.bp
new file mode 100644
index 0000000..4c31c6f
--- /dev/null
+++ b/power/1.0/default/Android.bp
@@ -0,0 +1,46 @@
+// Copyright (C) 2016 The Android Open Source Project
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//      http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+cc_library_shared {
+    name: "android.hardware.power@1.0-impl",
+    relative_install_path: "hw",
+    srcs: ["Power.cpp"],
+
+    shared_libs: [
+        "liblog",
+        "libhardware",
+        "libhidl",
+        "libhwbinder",
+        "libutils",
+        "android.hardware.power@1.0",
+    ],
+
+}
+
+cc_binary {
+    relative_install_path: "hw",
+    name: "android.hardware.power@1.0-service",
+    srcs: ["service.cpp"],
+
+    shared_libs: [
+        "liblog",
+        "libdl",
+        "libutils",
+        "libhardware",
+        "libhidl",
+        "libhwbinder",
+        "android.hardware.power@1.0",
+    ],
+
+}
diff --git a/power/1.0/default/Power.cpp b/power/1.0/default/Power.cpp
new file mode 100644
index 0000000..5d0593b
--- /dev/null
+++ b/power/1.0/default/Power.cpp
@@ -0,0 +1,159 @@
+/*
+ * Copyright (C) 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#define LOG_TAG "android.hardware.power@1.0-impl"
+#include <hardware/hardware.h>
+#include <hardware/power.h>
+#include "Power.h"
+
+namespace android {
+namespace hardware {
+namespace power {
+namespace V1_0 {
+namespace implementation {
+
+Power::Power(power_module_t *module) : mModule(module) {
+    if (mModule)
+        mModule->init(mModule);
+}
+
+Power::~Power() {
+    delete(mModule);
+}
+
+// Methods from ::android::hardware::power::V1_0::IPower follow.
+Return<void> Power::setInteractive(bool interactive)  {
+    if (mModule->setInteractive > 0)
+        mModule->setInteractive(mModule, interactive ? 1 : 0);
+    return Void();
+}
+
+Return<void> Power::powerHint(PowerHint hint, int32_t data)  {
+    int32_t param = data;
+    if (mModule->powerHint > 0)
+        mModule->powerHint(mModule, static_cast<power_hint_t>(hint), &param);
+    return Void();
+}
+
+Return<void> Power::setFeature(Feature feature, bool activate)  {
+    if (mModule->setFeature > 0)
+        mModule->setFeature(mModule, static_cast<feature_t>(feature),
+                activate ? 1 : 0);
+    return Void();
+}
+
+Return<void> Power::getPlatformLowPowerStats(getPlatformLowPowerStats_cb _hidl_cb)  {
+    hidl_vec<PowerStatePlatformSleepState> states;
+    ssize_t number_platform_modes;
+    size_t *voters = nullptr;
+    power_state_platform_sleep_state_t *legacy_states = nullptr;
+    int ret;
+
+    if (mModule->get_number_of_platform_modes == nullptr ||
+            mModule->get_voter_list == nullptr ||
+            mModule->get_platform_low_power_stats == nullptr)
+    {
+        _hidl_cb(states, Status::SUCCESS);
+        return Void();
+    }
+
+    number_platform_modes = mModule->get_number_of_platform_modes(mModule);
+    if (number_platform_modes > 0)
+    {
+       voters = new size_t [number_platform_modes];
+       if (voters == nullptr)
+           goto done;
+
+       ret = mModule->get_voter_list(mModule, voters);
+       if (ret != 0)
+           goto done;
+
+       legacy_states = new power_state_platform_sleep_state_t [number_platform_modes];
+       if (legacy_states == nullptr)
+           goto done;
+
+       for (int i = 0; i < number_platform_modes; i++)
+       {
+          legacy_states[i].voters = nullptr;
+          legacy_states[i].voters = new power_state_voter_t [voters[i]];
+          if (legacy_states[i].voters == nullptr)
+              goto done;
+       }
+
+       ret = mModule->get_platform_low_power_stats(mModule, legacy_states);
+       if (ret != 0)
+           goto done;
+
+       states.resize(number_platform_modes);
+       for (int i = 0; i < number_platform_modes; i++)
+       {
+          power_state_platform_sleep_state_t& legacy_state = legacy_states[i];
+          PowerStatePlatformSleepState& state = states[i];
+          state.name = legacy_state.name;
+          state.residencyInMsecSinceBoot = legacy_state.residency_in_msec_since_boot;
+          state.totalTransitions = legacy_state.total_transitions;
+          state.supportedOnlyInSuspend = legacy_state.supported_only_in_suspend;
+          state.voters.resize(voters[i]);
+          for(size_t j = 0; j < voters[i]; j++)
+          {
+              state.voters[j].name = legacy_state.voters[j].name;
+              state.voters[j].totalTimeInMsecVotedForSinceBoot = legacy_state.voters[j].total_time_in_msec_voted_for_since_boot;
+              state.voters[j].totalNumberOfTimesVotedSinceBoot = legacy_state.voters[j].total_number_of_times_voted_since_boot;
+          }
+       }
+    }
+done:
+    if (legacy_states)
+    {
+        for (int i = 0; i < number_platform_modes; i++)
+        {
+            if(legacy_states[i].voters)
+                delete(legacy_states[i].voters);
+        }
+    }
+    delete[] legacy_states;
+    delete[] voters;
+    _hidl_cb(states, Status::SUCCESS);
+    return Void();
+}
+
+IPower* HIDL_FETCH_IPower(const char* name) {
+    int ret = 0;
+    const hw_module_t* hw_module = NULL;
+    power_module_t *power_module;
+    ret = hw_get_module(name, &hw_module);
+    if (ret == 0 && hw_module->methods->open > 0) {
+        ret = hw_module->methods->open(hw_module, name,
+                reinterpret_cast<hw_device_t**>(&power_module));
+        if (ret == 0) {
+            return new Power(power_module);
+        }
+        else {
+            ALOGE("Passthrough failed to load legacy HAL.");
+            return nullptr;
+        }
+    }
+    else {
+        ALOGE ("hw_get_module %s failed: %d", name, ret);
+        return nullptr;
+    }
+}
+
+} // namespace implementation
+}  // namespace V1_0
+}  // namespace power
+}  // namespace hardware
+}  // namespace android
diff --git a/power/1.0/default/Power.h b/power/1.0/default/Power.h
new file mode 100644
index 0000000..a0495be
--- /dev/null
+++ b/power/1.0/default/Power.h
@@ -0,0 +1,61 @@
+/*
+ * Copyright (C) 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef HIDL_GENERATED_android_hardware_power_V1_0_Power_H_
+#define HIDL_GENERATED_android_hardware_power_V1_0_Power_H_
+
+#include <android/hardware/power/1.0/IPower.h>
+#include <hidl/Status.h>
+
+#include <hidl/MQDescriptor.h>
+namespace android {
+namespace hardware {
+namespace power {
+namespace V1_0 {
+namespace implementation {
+
+using ::android::hardware::power::V1_0::Feature;
+using ::android::hardware::power::V1_0::IPower;
+using ::android::hardware::power::V1_0::PowerHint;
+using ::android::hardware::power::V1_0::PowerStatePlatformSleepState;
+using ::android::hardware::power::V1_0::Status;
+using ::android::hardware::Return;
+using ::android::hardware::Void;
+using ::android::hardware::hidl_vec;
+using ::android::hardware::hidl_string;
+using ::android::sp;
+
+struct Power : public IPower {
+    Power(power_module_t* module);
+    ~Power();
+    Return<void> setInteractive(bool interactive)  override;
+    Return<void> powerHint(PowerHint hint, int32_t data)  override;
+    Return<void> setFeature(Feature feature, bool activate)  override;
+    Return<void> getPlatformLowPowerStats(getPlatformLowPowerStats_cb _hidl_cb)  override;
+
+  private:
+    power_module_t* mModule;
+};
+
+extern "C" IPower* HIDL_FETCH_IPower(const char* name);
+
+}  // namespace implementation
+}  // namespace V1_0
+}  // namespace power
+}  // namespace hardware
+}  // namespace android
+
+#endif  // HIDL_GENERATED_android_hardware_power_V1_0_Power_H_
diff --git a/power/1.0/default/service.cpp b/power/1.0/default/service.cpp
new file mode 100644
index 0000000..bad1adf
--- /dev/null
+++ b/power/1.0/default/service.cpp
@@ -0,0 +1,51 @@
+/*
+ * Copyright (C) 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#define LOG_TAG "android.hardware.power@1.0-service"
+#include <utils/Log.h>
+
+#include <iostream>
+#include <unistd.h>
+
+#include <android/hardware/power/1.0/IPower.h>
+
+#include <hidl/IServiceManager.h>
+#include <hwbinder/IPCThreadState.h>
+#include <hwbinder/ProcessState.h>
+#include <utils/Errors.h>
+#include <utils/StrongPointer.h>
+
+using android::sp;
+
+using android::hardware::IPCThreadState;
+using android::hardware::ProcessState;
+
+using android::hardware::power::V1_0::IPower;
+
+int main() {
+    const char instance[] = "power";
+    android::sp<IPower> service = IPower::getService(instance, true);
+    if (service.get() == nullptr) {
+        ALOGE("IPower::getService returned NULL, exiting");
+        return -1;
+    }
+    LOG_FATAL_IF(service->isRemote(), "Implementation is REMOTE!");
+    service->registerAsService(instance);
+
+    ProcessState::self()->setThreadPoolMaxThreadCount(0);
+    ProcessState::self()->startThreadPool();
+    IPCThreadState::self()->joinThreadPool();
+}
diff --git a/power/1.0/types.hal b/power/1.0/types.hal
new file mode 100644
index 0000000..c27242e
--- /dev/null
+++ b/power/1.0/types.hal
@@ -0,0 +1,168 @@
+/*
+ * Copyright (C) 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+package android.hardware.power@1.0;
+
+/* Power hint identifiers passed to powerHint() */
+enum PowerHint : uint32_t {
+   /*
+    * Foreground app has started or stopped requesting a VSYNC pulse
+    * from SurfaceFlinger. If the app has started requesting VSYNC
+    * then CPU and GPU load is expected soon, and it may be appropriate
+    * to raise speeds of CPU, memory bus, etc. The data parameter is
+    * non-zero to indicate VSYNC pulse is now requested, or zero for
+    * VSYNC pulse no longer requested.
+    */
+    VSYNC = 0x00000001,
+
+
+   /*
+    * User is interacting with the device, for example, touchscreen
+    * events are incoming. CPU and GPU load may be expected soon,
+    * and it may be appropriate to raise speeds of CPU, memory bus,
+    * etc. The data parameter is the estimated length of the interaction
+    * in milliseconds, or 0 if unknown.
+    */
+    INTERACTION = 0x00000002,
+
+
+    /* DO NOT USE VIDEO_ENCODE/_DECODE!  They will be removed in
+     * KLP.
+     */
+    VIDEO_ENCODE = 0x00000003,
+    VIDEO_DECODE = 0x00000004,
+
+   /*
+    * Low power mode is activated or deactivated. Low power mode
+    * is intended to save battery at the cost of performance. The data
+    * parameter is non-zero when low power mode is activated, and zero
+    * when deactivated.
+    */
+    LOW_POWER = 0x00000005,
+
+   /*
+    * Sustained Performance mode is actived or deactivated. Sustained
+    * performance mode is intended to provide a consistent level of
+    * performance for a prolonged amount of time. The data parameter is
+    * non-zero when sustained performance mode is activated, and zero
+    * when deactivated.
+    */
+    SUSTAINED_PERFORMANCE = 0x00000006,
+
+   /*
+    * VR Mode is activated or deactivated. VR mode is intended to
+    * provide minimum guarantee for performance for the amount of time the
+    * device can sustain it. The data parameter is non-zero when the mode
+    * is activated and zero when deactivated.
+    */
+    VR_MODE = 0x00000007,
+
+   /*
+    * This hint indicates that an application has been launched. Can be used
+    * for device specific optimizations during application launch. The data
+    * parameter is non-zero when the application starts to launch and zero when
+    * it has been launched.
+    */
+    LAUNCH = 0x00000008,
+
+   /*
+    * When device enters some special modes, e.g. theater mode in Android
+    * Wear, there is no touch interaction expected between device and user.
+    * Touch controller could be disabled in those modes to save power.
+    * The data parameter is non-zero when touch could be disabled, and zero
+    * when touch needs to be re-enabled.
+    */
+    DISABLE_TOUCH = 0x00000009
+};
+
+enum Feature : uint32_t {
+    /*
+     * Enabling/Disabling this feature will allow/disallow the system
+     * to wake up by tapping the screen twice.
+     */
+    POWER_FEATURE_DOUBLE_TAP_TO_WAKE = 0x00000001
+};
+
+enum Status : uint32_t {
+    SUCCESS = 0,
+    FILESYSTEM_ERROR = 1
+};
+/*
+ * Platform-level sleep state stats:
+ * PowerStateVoter struct is useful for describing the individual voters
+ * when a Platform-level sleep state is chosen by aggregation of votes from
+ * multiple clients/system conditions.
+ *
+ * This helps in attirbuting what in the device is blocking the device from
+ * entering the lowest Platform-level sleep state.
+ */
+struct PowerStateVoter {
+    /*
+     * Name of the voter.
+     */
+     string name;
+
+    /*
+     * Total time in msec the voter voted for the platform sleep state since
+     * boot.
+     */
+     uint64_t totalTimeInMsecVotedForSinceBoot;
+
+    /*
+     * Number of times the voter voted for the platform sleep state since boot.
+     */
+     uint64_t totalNumberOfTimesVotedSinceBoot;
+};
+
+/*
+ * Platform-level sleep state stats:
+ * PowerStatePlatformSleepState represents the Platform-level sleep state
+ * the device is capable of getting into.
+ *
+ * SoCs usually have more than one Platform-level sleep state.
+ */
+struct PowerStatePlatformSleepState {
+    /*
+     * Platform-level Sleep state name.
+     */
+    string name;
+
+    /*
+     * Time spent in msec at this platform-level sleep state since boot.
+     */
+    uint64_t residencyInMsecSinceBoot;
+
+    /*
+     * Total number of times system entered this state.
+     */
+    uint64_t totalTransitions;
+
+    /*
+     * This platform-level sleep state can only be reached during system suspend
+     */
+    bool supportedOnlyInSuspend;
+
+    /*
+     * voters is useful if the Platform-level sleep state
+     * is chosen by aggregation votes from multiple clients/system conditions.
+     * All the voters have to say yes or all the system conditions need to be
+     * met to enter a platform-level sleep state.
+     *
+     * Vector of size zero implies either the info is not available
+     * or the system does not follow a voting mechanism to choose this
+     * Platform-level sleep state.
+     */
+    vec<PowerStateVoter> voters;
+};
diff --git a/sensors/1.0/Android.bp b/sensors/1.0/Android.bp
new file mode 100644
index 0000000..32ee049
--- /dev/null
+++ b/sensors/1.0/Android.bp
@@ -0,0 +1,46 @@
+// This file is autogenerated by hidl-gen. Do not edit manually.
+
+genrule {
+    name: "android.hardware.sensors@1.0_genc++",
+    tool: "hidl-gen",
+    cmd: "$tool -o $genDir -Lc++ -randroid.hardware:hardware/interfaces android.hardware.sensors@1.0",
+    srcs: [
+        "types.hal",
+        "ISensors.hal",
+    ],
+    out: [
+        "android/hardware/sensors/1.0/types.cpp",
+        "android/hardware/sensors/1.0/SensorsAll.cpp",
+    ],
+}
+
+genrule {
+    name: "android.hardware.sensors@1.0_genc++_headers",
+    tool: "hidl-gen",
+    cmd: "$tool -o $genDir -Lc++ -randroid.hardware:hardware/interfaces android.hardware.sensors@1.0",
+    srcs: [
+        "types.hal",
+        "ISensors.hal",
+    ],
+    out: [
+        "android/hardware/sensors/1.0/types.h",
+        "android/hardware/sensors/1.0/ISensors.h",
+        "android/hardware/sensors/1.0/IHwSensors.h",
+        "android/hardware/sensors/1.0/BnSensors.h",
+        "android/hardware/sensors/1.0/BpSensors.h",
+        "android/hardware/sensors/1.0/BsSensors.h",
+    ],
+}
+
+cc_library_shared {
+    name: "android.hardware.sensors@1.0",
+    generated_sources: ["android.hardware.sensors@1.0_genc++"],
+    generated_headers: ["android.hardware.sensors@1.0_genc++_headers"],
+    export_generated_headers: ["android.hardware.sensors@1.0_genc++_headers"],
+    shared_libs: [
+        "libhidl",
+        "libhwbinder",
+        "libutils",
+        "libcutils",
+    ],
+}
diff --git a/sensors/1.0/ISensors.hal b/sensors/1.0/ISensors.hal
new file mode 100644
index 0000000..adacfe0
--- /dev/null
+++ b/sensors/1.0/ISensors.hal
@@ -0,0 +1,124 @@
+/*
+ * Copyright (C) 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.sensors@1.0;
+
+interface ISensors {
+    /**
+     * Enumerate all available (static) sensors.
+     */
+    getSensorsList() generates (vec<SensorInfo> list);
+
+    /**
+     *  Place the module in a specific mode. The following modes are defined
+     *
+     *  SENSOR_HAL_NORMAL_MODE - Normal operation. Default state of the module.
+     *
+     *  SENSOR_HAL_DATA_INJECTION_MODE - Loopback mode.
+     *    Data is injected for the supported sensors by the sensor service in
+     *    this mode.
+     *
+     * @return OK on success
+     *         BAD_VALUE if requested mode is not supported
+     *         PERMISSION_DENIED if operation is not allowed
+     */
+    setOperationMode(OperationMode mode) generates (Result result);
+
+    /* Activate/de-activate one sensor.
+     *
+     * sensorHandle is the handle of the sensor to change.
+     * enabled set to true to enable, or false to disable the sensor.
+     *
+     * After sensor de-activation, existing sensor events that have not
+     * been picked up by poll() should be abandoned immediately so that
+     * subsequent activation will not get stale sensor events (events
+     * that are generated prior to the latter activation).
+     *
+     * Returns OK on success, BAD_VALUE if sensorHandle is invalid.
+     */
+    activate(int32_t sensorHandle, bool enabled) generates (Result result);
+
+    /**
+     * Set the sampling period in nanoseconds for a given sensor.
+     * If samplingPeriodNs > maxDelay it will be truncated to
+     * maxDelay and if samplingPeriodNs < minDelay it will be
+     * replaced by minDelay.
+     *
+     * Returns OK on success, BAD_VALUE if sensorHandle is invalid.
+     */
+    setDelay(int32_t sensorHandle, int64_t samplingPeriodNs)
+        generates (Result result);
+
+    /**
+     * Generate a vector of sensor events containing at most "maxCount"
+     * entries.
+     *
+     * Additionally a vector of SensorInfos is returned for any dynamic sensors
+     * connected as notified by returned events of type DYNAMIC_SENSOR_META.
+     *
+     * This function should block if there is no sensor event
+     * available when being called.
+     *
+     * Returns OK on success or BAD_VALUE if maxCount <= 0.
+     */
+    poll(int32_t maxCount)
+        generates (
+                Result result,
+                vec<Event> data,
+                vec<SensorInfo> dynamicSensorsAdded);
+
+    /*
+     * Sets a sensor’s parameters, including sampling frequency and maximum
+     * report latency. This function can be called while the sensor is
+     * activated, in which case it must not cause any sensor measurements to
+     * be lost: transitioning from one sampling rate to the other cannot cause
+     * lost events, nor can transitioning from a high maximum report latency to
+     * a low maximum report latency.
+     * See the Batching sensor results page for details:
+     * http://source.android.com/devices/sensors/batching.html
+     *
+     * Returns OK on success, BAD_VALUE if any parameters are invalid.
+     */
+    batch(int32_t sensorHandle,
+          int32_t flags,
+          int64_t samplingPeriodNs,
+          int64_t maxReportLatencyNs) generates (Result result);
+
+    /*
+     * Flush adds a FLUSH_COMPLETE metadata event to the end of the "batch mode"
+     * FIFO for the specified sensor and flushes the FIFO.
+     * If the FIFO is empty or if the sensor doesn't support batching
+     * (FIFO size zero), it should return SUCCESS along with a trivial
+     * FLUSH_COMPLETE event added to the event stream.
+     * This applies to all sensors other than one-shot sensors.
+     * If the sensor is a one-shot sensor, flush must return BAD_VALUE and not
+     * generate any flush complete metadata.
+     * If the sensor is not active at the time flush() is called, flush() should
+     * return BAD_VALUE.
+     * Returns OK on success and BAD_VALUE if sensorHandle is invalid.
+     */
+    flush(int32_t sensorHandle) generates (Result result);
+
+    /*
+     * Inject a single sensor sample to this device.
+     * data points to the sensor event to be injected
+     * Returns OK on success
+     *         PERMISSION_DENIED if operation is not allowed
+     *         INVALID_OPERATION, if this functionality is unsupported
+     *         BAD_VALUE if sensor event cannot be injected
+     */
+    injectSensorData(Event event) generates (Result result);
+};
diff --git a/sensors/1.0/default/Android.bp b/sensors/1.0/default/Android.bp
new file mode 100644
index 0000000..d454cdb
--- /dev/null
+++ b/sensors/1.0/default/Android.bp
@@ -0,0 +1,38 @@
+cc_library_shared {
+    name: "android.hardware.sensors@1.0-impl",
+    relative_install_path: "hw",
+    srcs: ["Sensors.cpp"],
+    shared_libs: [
+        "liblog",
+        "libcutils",
+        "libhardware",
+        "libhwbinder",
+        "libbase",
+        "libcutils",
+        "libutils",
+        "libhidl",
+        "android.hardware.sensors@1.0",
+    ],
+    static_libs: [
+        "android.hardware.sensors@1.0-convert",
+    ],
+}
+
+cc_library_static {
+    name: "android.hardware.sensors@1.0-convert",
+    srcs: ["convert.cpp"],
+    export_include_dirs: ["include"],
+    shared_libs: [
+        "liblog",
+        "libcutils",
+        "libhardware",
+        "libhwbinder",
+        "libbase",
+        "libcutils",
+        "libutils",
+        "libhidl",
+        "android.hardware.sensors@1.0",
+    ],
+}
+
+
diff --git a/sensors/1.0/default/Android.mk b/sensors/1.0/default/Android.mk
new file mode 100644
index 0000000..4f418cb
--- /dev/null
+++ b/sensors/1.0/default/Android.mk
@@ -0,0 +1,24 @@
+LOCAL_PATH:= $(call my-dir)
+
+include $(CLEAR_VARS)
+LOCAL_MODULE_RELATIVE_PATH := hw
+LOCAL_MODULE := android.hardware.sensors@1.0-service
+LOCAL_INIT_RC := android.hardware.sensors@1.0-service.rc
+LOCAL_SRC_FILES := \
+	service.cpp \
+
+LOCAL_SHARED_LIBRARIES := \
+	liblog \
+	libcutils \
+	libdl \
+	libbase \
+	libutils \
+	libhardware_legacy \
+	libhardware \
+
+LOCAL_SHARED_LIBRARIES += \
+	libhwbinder \
+	libhidl \
+	android.hardware.sensors@1.0 \
+
+include $(BUILD_EXECUTABLE)
diff --git a/sensors/1.0/default/Sensors.cpp b/sensors/1.0/default/Sensors.cpp
new file mode 100644
index 0000000..ef052c3
--- /dev/null
+++ b/sensors/1.0/default/Sensors.cpp
@@ -0,0 +1,250 @@
+/*
+ * Copyright (C) 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "Sensors.h"
+
+#include "convert.h"
+
+#include <android-base/logging.h>
+
+namespace android {
+namespace hardware {
+namespace sensors {
+namespace V1_0 {
+namespace implementation {
+
+static Result ResultFromStatus(status_t err) {
+    switch (err) {
+        case OK:
+            return Result::OK;
+        case BAD_VALUE:
+            return Result::BAD_VALUE;
+        case PERMISSION_DENIED:
+            return Result::PERMISSION_DENIED;
+        default:
+            return Result::INVALID_OPERATION;
+    }
+}
+
+Sensors::Sensors()
+    : mInitCheck(NO_INIT),
+      mSensorModule(nullptr),
+      mSensorDevice(nullptr) {
+    status_t err = hw_get_module(
+            SENSORS_HARDWARE_MODULE_ID,
+            (hw_module_t const **)&mSensorModule);
+
+    if (mSensorModule == NULL) {
+        err = UNKNOWN_ERROR;
+    }
+
+    if (err != OK) {
+        LOG(ERROR) << "Couldn't load "
+                   << SENSORS_HARDWARE_MODULE_ID
+                   << " module ("
+                   << strerror(-err)
+                   << ")";
+
+        mInitCheck = err;
+        return;
+    }
+
+    err = sensors_open_1(&mSensorModule->common, &mSensorDevice);
+
+    if (err != OK) {
+        LOG(ERROR) << "Couldn't open device for module "
+                   << SENSORS_HARDWARE_MODULE_ID
+                   << " ("
+                   << strerror(-err)
+                   << ")";
+
+        mInitCheck = err;
+        return;
+    }
+
+    // Require all the old HAL APIs to be present except for injection, which
+    // is considered optional.
+    CHECK_GE(getHalDeviceVersion(), SENSORS_DEVICE_API_VERSION_1_3);
+
+    mInitCheck = OK;
+}
+
+status_t Sensors::initCheck() const {
+    return mInitCheck;
+}
+
+Return<void> Sensors::getSensorsList(getSensorsList_cb _aidl_cb) {
+    sensor_t const *list;
+    size_t count = mSensorModule->get_sensors_list(mSensorModule, &list);
+
+    hidl_vec<SensorInfo> out;
+    out.resize(count);
+
+    for (size_t i = 0; i < count; ++i) {
+        const sensor_t *src = &list[i];
+        SensorInfo *dst = &out[i];
+
+        convertFromSensor(*src, dst);
+    }
+
+    _aidl_cb(out);
+
+    return Void();
+}
+
+int Sensors::getHalDeviceVersion() const {
+    if (!mSensorDevice) {
+        return -1;
+    }
+
+    return mSensorDevice->common.version;
+}
+
+Return<Result> Sensors::setOperationMode(OperationMode mode) {
+    return ResultFromStatus(mSensorModule->set_operation_mode((uint32_t)mode));
+}
+
+Return<Result> Sensors::activate(
+        int32_t sensor_handle, bool enabled) {
+    return ResultFromStatus(
+            mSensorDevice->activate(
+                reinterpret_cast<sensors_poll_device_t *>(mSensorDevice),
+                sensor_handle,
+                enabled));
+}
+
+Return<Result> Sensors::setDelay(
+        int32_t sensor_handle, int64_t sampling_period_ns) {
+    return ResultFromStatus(
+            mSensorDevice->setDelay(
+                reinterpret_cast<sensors_poll_device_t *>(mSensorDevice),
+                sensor_handle,
+                sampling_period_ns));
+}
+
+Return<void> Sensors::poll(int32_t maxCount, poll_cb _aidl_cb) {
+    hidl_vec<Event> out;
+    hidl_vec<SensorInfo> dynamicSensorsAdded;
+
+    if (maxCount <= 0) {
+        _aidl_cb(Result::BAD_VALUE, out, dynamicSensorsAdded);
+        return Void();
+    }
+
+    std::unique_ptr<sensors_event_t[]> data(new sensors_event_t[maxCount]);
+
+    int err = mSensorDevice->poll(
+            reinterpret_cast<sensors_poll_device_t *>(mSensorDevice),
+            data.get(),
+            maxCount);
+
+    if (err < 0) {
+        _aidl_cb(ResultFromStatus(err), out, dynamicSensorsAdded);
+        return Void();
+    }
+
+    const size_t count = (size_t)err;
+
+    for (size_t i = 0; i < count; ++i) {
+        if (data[i].type != SENSOR_TYPE_DYNAMIC_SENSOR_META) {
+            continue;
+        }
+
+        const dynamic_sensor_meta_event_t *dyn = &data[i].dynamic_sensor_meta;
+
+        if (!dyn->connected) {
+            continue;
+        }
+
+        CHECK(dyn->sensor != nullptr);
+        CHECK_EQ(dyn->sensor->handle, dyn->handle);
+
+        SensorInfo info;
+        convertFromSensor(*dyn->sensor, &info);
+
+        size_t numDynamicSensors = dynamicSensorsAdded.size();
+        dynamicSensorsAdded.resize(numDynamicSensors + 1);
+        dynamicSensorsAdded[numDynamicSensors] = info;
+    }
+
+    out.resize(count);
+    convertFromSensorEvents(err, data.get(), &out);
+
+    _aidl_cb(Result::OK, out, dynamicSensorsAdded);
+
+    return Void();
+}
+
+Return<Result> Sensors::batch(
+        int32_t sensor_handle,
+        int32_t flags,
+        int64_t sampling_period_ns,
+        int64_t max_report_latency_ns) {
+    return ResultFromStatus(
+            mSensorDevice->batch(
+                mSensorDevice,
+                sensor_handle,
+                flags,
+                sampling_period_ns,
+                max_report_latency_ns));
+}
+
+Return<Result> Sensors::flush(int32_t sensor_handle) {
+    return ResultFromStatus(mSensorDevice->flush(mSensorDevice, sensor_handle));
+}
+
+Return<Result> Sensors::injectSensorData(const Event& event) {
+    if (getHalDeviceVersion() < SENSORS_DEVICE_API_VERSION_1_4) {
+        return Result::INVALID_OPERATION;
+    }
+
+    sensors_event_t out;
+    convertToSensorEvent(event, &out);
+
+    return ResultFromStatus(
+            mSensorDevice->inject_sensor_data(mSensorDevice, &out));
+}
+
+// static
+void Sensors::convertFromSensorEvents(
+        size_t count,
+        const sensors_event_t *srcArray,
+        hidl_vec<Event> *dstVec) {
+    for (size_t i = 0; i < count; ++i) {
+        const sensors_event_t &src = srcArray[i];
+        Event *dst = &(*dstVec)[i];
+
+        convertFromSensorEvent(src, dst);
+    }
+}
+
+ISensors *HIDL_FETCH_ISensors(const char * /* hal */) {
+    Sensors *sensors = new Sensors;
+    if (sensors->initCheck() != OK) {
+        delete sensors;
+        sensors = nullptr;
+
+        return nullptr;
+    }
+
+    return sensors;
+}
+
+}  // namespace implementation
+}  // namespace V1_0
+}  // namespace sensors
+}  // namespace hardware
+}  // namespace android
diff --git a/sensors/1.0/default/Sensors.h b/sensors/1.0/default/Sensors.h
new file mode 100644
index 0000000..f9b837d
--- /dev/null
+++ b/sensors/1.0/default/Sensors.h
@@ -0,0 +1,78 @@
+/*
+ * Copyright (C) 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef HARDWARE_INTERFACES_SENSORS_V1_0_DEFAULT_SENSORS_H_
+
+#define HARDWARE_INTERFACES_SENSORS_V1_0_DEFAULT_SENSORS_H_
+
+#include <android/hardware/sensors/1.0/ISensors.h>
+#include <hardware/sensors.h>
+
+namespace android {
+namespace hardware {
+namespace sensors {
+namespace V1_0 {
+namespace implementation {
+
+struct Sensors : public ::android::hardware::sensors::V1_0::ISensors {
+    Sensors();
+
+    status_t initCheck() const;
+
+    Return<void> getSensorsList(getSensorsList_cb _aidl_cb) override;
+
+    Return<Result> setOperationMode(OperationMode mode) override;
+
+    Return<Result> activate(
+            int32_t sensor_handle, bool enabled) override;
+
+    Return<Result> setDelay(
+            int32_t sensor_handle, int64_t sampling_period_ns) override;
+
+    Return<void> poll(int32_t maxCount, poll_cb _hidl_cb) override;
+
+    Return<Result> batch(
+            int32_t sensor_handle,
+            int32_t flags,
+            int64_t sampling_period_ns,
+            int64_t max_report_latency_ns) override;
+
+    Return<Result> flush(int32_t sensor_handle) override;
+
+    Return<Result> injectSensorData(const Event& event) override;
+
+private:
+    status_t mInitCheck;
+    sensors_module_t *mSensorModule;
+    sensors_poll_device_1_t *mSensorDevice;
+
+    int getHalDeviceVersion() const;
+
+    static void convertFromSensorEvents(
+            size_t count, const sensors_event_t *src, hidl_vec<Event> *dst);
+
+    DISALLOW_COPY_AND_ASSIGN(Sensors);
+};
+
+extern "C" ISensors *HIDL_FETCH_ISensors(const char *name);
+
+}  // namespace implementation
+}  // namespace V1_0
+}  // namespace sensors
+}  // namespace hardware
+}  // namespace android
+
+#endif  // HARDWARE_INTERFACES_SENSORS_V1_0_DEFAULT_SENSORS_H_
diff --git a/sensors/1.0/default/android.hardware.sensors@1.0-service.rc b/sensors/1.0/default/android.hardware.sensors@1.0-service.rc
new file mode 100644
index 0000000..2cba0fc
--- /dev/null
+++ b/sensors/1.0/default/android.hardware.sensors@1.0-service.rc
@@ -0,0 +1,4 @@
+service sensors-hal-1-0 /system/bin/hw/android.hardware.sensors@1.0-service
+    class main
+    user system
+    group system readproc
diff --git a/sensors/1.0/default/convert.cpp b/sensors/1.0/default/convert.cpp
new file mode 100644
index 0000000..f4e1841
--- /dev/null
+++ b/sensors/1.0/default/convert.cpp
@@ -0,0 +1,346 @@
+/*
+ * Copyright (C) 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "include/convert.h"
+
+#include <android-base/logging.h>
+
+namespace android {
+namespace hardware {
+namespace sensors {
+namespace V1_0 {
+namespace implementation {
+
+void convertFromSensor(const sensor_t &src, SensorInfo *dst) {
+    dst->name = src.name;
+    dst->vendor = src.vendor;
+    dst->version = src.version;
+    dst->sensorHandle = src.handle;
+    dst->type = (SensorType)src.type;
+    dst->maxRange = src.maxRange;
+    dst->resolution = src.resolution;
+    dst->power = src.power;
+    dst->minDelay = src.minDelay;
+    dst->fifoReservedEventCount = src.fifoReservedEventCount;
+    dst->fifoMaxEventCount = src.fifoMaxEventCount;
+    dst->typeAsString = src.stringType;
+    dst->requiredPermission = src.requiredPermission;
+    dst->maxDelay = src.maxDelay;
+    dst->flags = src.flags;
+}
+
+void convertToSensor(
+        const ::android::hardware::sensors::V1_0::SensorInfo &src,
+        sensor_t *dst) {
+    dst->name = strdup(src.name.c_str());
+    dst->vendor = strdup(src.vendor.c_str());
+    dst->version = src.version;
+    dst->handle = src.sensorHandle;
+    dst->type = (int)src.type;
+    dst->maxRange = src.maxRange;
+    dst->resolution = src.resolution;
+    dst->power = src.power;
+    dst->minDelay = src.minDelay;
+    dst->fifoReservedEventCount = src.fifoReservedEventCount;
+    dst->fifoMaxEventCount = src.fifoMaxEventCount;
+    dst->stringType = strdup(src.typeAsString.c_str());
+    dst->requiredPermission = strdup(src.requiredPermission.c_str());
+    dst->maxDelay = src.maxDelay;
+    dst->flags = src.flags;
+    dst->reserved[0] = dst->reserved[1] = 0;
+}
+
+void convertFromSensorEvent(const sensors_event_t &src, Event *dst) {
+    typedef ::android::hardware::sensors::V1_0::SensorType SensorType;
+    typedef ::android::hardware::sensors::V1_0::MetaDataEventType MetaDataEventType;
+
+    dst->sensorHandle = src.sensor;
+    dst->sensorType = (SensorType)src.type;
+    dst->timestamp = src.timestamp;
+
+    switch (dst->sensorType) {
+        case SensorType::SENSOR_TYPE_META_DATA:
+        {
+            dst->u.meta.what = (MetaDataEventType)src.meta_data.what;
+            break;
+        }
+
+        case SensorType::SENSOR_TYPE_ACCELEROMETER:
+        case SensorType::SENSOR_TYPE_GEOMAGNETIC_FIELD:
+        case SensorType::SENSOR_TYPE_ORIENTATION:
+        case SensorType::SENSOR_TYPE_GYROSCOPE:
+        case SensorType::SENSOR_TYPE_GRAVITY:
+        case SensorType::SENSOR_TYPE_LINEAR_ACCELERATION:
+        {
+            dst->u.vec3.x = src.acceleration.x;
+            dst->u.vec3.y = src.acceleration.y;
+            dst->u.vec3.z = src.acceleration.z;
+            dst->u.vec3.status = (SensorStatus)src.acceleration.status;
+            break;
+        }
+
+        case SensorType::SENSOR_TYPE_ROTATION_VECTOR:
+        case SensorType::SENSOR_TYPE_GAME_ROTATION_VECTOR:
+        case SensorType::SENSOR_TYPE_GEOMAGNETIC_ROTATION_VECTOR:
+        {
+            dst->u.vec4.x = src.data[0];
+            dst->u.vec4.y = src.data[1];
+            dst->u.vec4.z = src.data[2];
+            dst->u.vec4.w = src.data[3];
+            break;
+        }
+
+        case SensorType::SENSOR_TYPE_MAGNETIC_FIELD_UNCALIBRATED:
+        case SensorType::SENSOR_TYPE_GYROSCOPE_UNCALIBRATED:
+        {
+            dst->u.uncal.x = src.uncalibrated_gyro.x_uncalib;
+            dst->u.uncal.y = src.uncalibrated_gyro.y_uncalib;
+            dst->u.uncal.z = src.uncalibrated_gyro.z_uncalib;
+            dst->u.uncal.x_bias = src.uncalibrated_gyro.x_bias;
+            dst->u.uncal.y_bias = src.uncalibrated_gyro.y_bias;
+            dst->u.uncal.z_bias = src.uncalibrated_gyro.z_bias;
+            break;
+        }
+
+        case SensorType::SENSOR_TYPE_DEVICE_ORIENTATION:
+        case SensorType::SENSOR_TYPE_LIGHT:
+        case SensorType::SENSOR_TYPE_PRESSURE:
+        case SensorType::SENSOR_TYPE_TEMPERATURE:
+        case SensorType::SENSOR_TYPE_PROXIMITY:
+        case SensorType::SENSOR_TYPE_RELATIVE_HUMIDITY:
+        case SensorType::SENSOR_TYPE_AMBIENT_TEMPERATURE:
+        case SensorType::SENSOR_TYPE_SIGNIFICANT_MOTION:
+        case SensorType::SENSOR_TYPE_STEP_DETECTOR:
+        case SensorType::SENSOR_TYPE_TILT_DETECTOR:
+        case SensorType::SENSOR_TYPE_WAKE_GESTURE:
+        case SensorType::SENSOR_TYPE_GLANCE_GESTURE:
+        case SensorType::SENSOR_TYPE_PICK_UP_GESTURE:
+        case SensorType::SENSOR_TYPE_WRIST_TILT_GESTURE:
+        case SensorType::SENSOR_TYPE_STATIONARY_DETECT:
+        case SensorType::SENSOR_TYPE_MOTION_DETECT:
+        case SensorType::SENSOR_TYPE_HEART_BEAT:
+        {
+            dst->u.scalar = src.data[0];
+            break;
+        }
+
+        case SensorType::SENSOR_TYPE_STEP_COUNTER:
+        {
+            dst->u.stepCount = src.u64.step_counter;
+            break;
+        }
+
+        case SensorType::SENSOR_TYPE_HEART_RATE:
+        {
+            dst->u.heartRate.bpm = src.heart_rate.bpm;
+            dst->u.heartRate.status = (SensorStatus)src.heart_rate.status;
+            break;
+        }
+
+        case SensorType::SENSOR_TYPE_POSE_6DOF:  // 15 floats
+        {
+            for (size_t i = 0; i < 15; ++i) {
+                dst->u.pose6DOF[i] = src.data[i];
+            }
+            break;
+        }
+
+        case SensorType::SENSOR_TYPE_DYNAMIC_SENSOR_META:
+        {
+            dst->u.dynamic.connected = src.dynamic_sensor_meta.connected;
+            dst->u.dynamic.sensorHandle = src.dynamic_sensor_meta.handle;
+
+            memcpy(dst->u.dynamic.uuid.data(),
+                   src.dynamic_sensor_meta.uuid,
+                   16);
+
+            break;
+        }
+
+        case SensorType::SENSOR_TYPE_ADDITIONAL_INFO:
+        {
+            ::android::hardware::sensors::V1_0::AdditionalInfo *dstInfo =
+                &dst->u.additional;
+
+            const additional_info_event_t &srcInfo = src.additional_info;
+
+            dstInfo->type =
+                (::android::hardware::sensors::V1_0::AdditionalInfoType)
+                    srcInfo.type;
+
+            dstInfo->serial = srcInfo.serial;
+
+            CHECK_EQ(sizeof(dstInfo->u), sizeof(srcInfo.data_int32));
+            memcpy(&dstInfo->u, srcInfo.data_int32, sizeof(srcInfo.data_int32));
+            break;
+        }
+
+        default:
+        {
+            CHECK_GE((int32_t)dst->sensorType,
+                     (int32_t)SensorType::SENSOR_TYPE_DEVICE_PRIVATE_BASE);
+
+            memcpy(dst->u.data.data(), src.data, 16 * sizeof(float));
+            break;
+        }
+    }
+}
+
+void convertToSensorEvent(const Event &src, sensors_event_t *dst) {
+    dst->version = sizeof(sensors_event_t);
+    dst->sensor = src.sensorHandle;
+    dst->type = (int32_t)src.sensorType;
+    dst->reserved0 = 0;
+    dst->timestamp = src.timestamp;
+    dst->flags = 0;
+    dst->reserved1[0] = dst->reserved1[1] = dst->reserved1[2] = 0;
+
+    switch (src.sensorType) {
+        case SensorType::SENSOR_TYPE_META_DATA:
+        {
+            dst->meta_data.what = (int32_t)src.u.meta.what;
+            dst->meta_data.sensor = dst->sensor;
+            break;
+        }
+
+        case SensorType::SENSOR_TYPE_ACCELEROMETER:
+        case SensorType::SENSOR_TYPE_GEOMAGNETIC_FIELD:
+        case SensorType::SENSOR_TYPE_ORIENTATION:
+        case SensorType::SENSOR_TYPE_GYROSCOPE:
+        case SensorType::SENSOR_TYPE_GRAVITY:
+        case SensorType::SENSOR_TYPE_LINEAR_ACCELERATION:
+        {
+            dst->acceleration.x = src.u.vec3.x;
+            dst->acceleration.y = src.u.vec3.y;
+            dst->acceleration.z = src.u.vec3.z;
+            dst->acceleration.status = (int8_t)src.u.vec3.status;
+            break;
+        }
+
+        case SensorType::SENSOR_TYPE_ROTATION_VECTOR:
+        case SensorType::SENSOR_TYPE_GAME_ROTATION_VECTOR:
+        case SensorType::SENSOR_TYPE_GEOMAGNETIC_ROTATION_VECTOR:
+        {
+            dst->data[0] = src.u.vec4.x;
+            dst->data[1] = src.u.vec4.y;
+            dst->data[2] = src.u.vec4.z;
+            dst->data[3] = src.u.vec4.w;
+            break;
+        }
+
+        case SensorType::SENSOR_TYPE_MAGNETIC_FIELD_UNCALIBRATED:
+        case SensorType::SENSOR_TYPE_GYROSCOPE_UNCALIBRATED:
+        {
+            dst->uncalibrated_gyro.x_uncalib = src.u.uncal.x;
+            dst->uncalibrated_gyro.y_uncalib = src.u.uncal.y;
+            dst->uncalibrated_gyro.z_uncalib = src.u.uncal.z;
+            dst->uncalibrated_gyro.x_bias = src.u.uncal.x_bias;
+            dst->uncalibrated_gyro.y_bias = src.u.uncal.y_bias;
+            dst->uncalibrated_gyro.z_bias = src.u.uncal.z_bias;
+            break;
+        }
+
+        case SensorType::SENSOR_TYPE_DEVICE_ORIENTATION:
+        case SensorType::SENSOR_TYPE_LIGHT:
+        case SensorType::SENSOR_TYPE_PRESSURE:
+        case SensorType::SENSOR_TYPE_TEMPERATURE:
+        case SensorType::SENSOR_TYPE_PROXIMITY:
+        case SensorType::SENSOR_TYPE_RELATIVE_HUMIDITY:
+        case SensorType::SENSOR_TYPE_AMBIENT_TEMPERATURE:
+        case SensorType::SENSOR_TYPE_SIGNIFICANT_MOTION:
+        case SensorType::SENSOR_TYPE_STEP_DETECTOR:
+        case SensorType::SENSOR_TYPE_TILT_DETECTOR:
+        case SensorType::SENSOR_TYPE_WAKE_GESTURE:
+        case SensorType::SENSOR_TYPE_GLANCE_GESTURE:
+        case SensorType::SENSOR_TYPE_PICK_UP_GESTURE:
+        case SensorType::SENSOR_TYPE_WRIST_TILT_GESTURE:
+        case SensorType::SENSOR_TYPE_STATIONARY_DETECT:
+        case SensorType::SENSOR_TYPE_MOTION_DETECT:
+        case SensorType::SENSOR_TYPE_HEART_BEAT:
+        {
+            dst->data[0] = src.u.scalar;
+            break;
+        }
+
+        case SensorType::SENSOR_TYPE_STEP_COUNTER:
+        {
+            dst->u64.step_counter = src.u.stepCount;
+            break;
+        }
+
+        case SensorType::SENSOR_TYPE_HEART_RATE:
+        {
+            dst->heart_rate.bpm = src.u.heartRate.bpm;
+            dst->heart_rate.status = (int8_t)src.u.heartRate.status;
+            break;
+        }
+
+        case SensorType::SENSOR_TYPE_POSE_6DOF:  // 15 floats
+        {
+            for (size_t i = 0; i < 15; ++i) {
+                dst->data[i] = src.u.pose6DOF[i];
+            }
+            break;
+        }
+
+        case SensorType::SENSOR_TYPE_DYNAMIC_SENSOR_META:
+        {
+            dst->dynamic_sensor_meta.connected = src.u.dynamic.connected;
+            dst->dynamic_sensor_meta.handle = src.u.dynamic.sensorHandle;
+            dst->dynamic_sensor_meta.sensor = NULL;  // to be filled in later
+
+            memcpy(dst->dynamic_sensor_meta.uuid,
+                   src.u.dynamic.uuid.data(),
+                   16);
+
+            break;
+        }
+
+        case SensorType::SENSOR_TYPE_ADDITIONAL_INFO:
+        {
+            const ::android::hardware::sensors::V1_0::AdditionalInfo &srcInfo =
+                src.u.additional;
+
+            additional_info_event_t *dstInfo = &dst->additional_info;
+            dstInfo->type = (int32_t)srcInfo.type;
+            dstInfo->serial = srcInfo.serial;
+
+            CHECK_EQ(sizeof(srcInfo.u), sizeof(dstInfo->data_int32));
+
+            memcpy(dstInfo->data_int32,
+                   &srcInfo.u,
+                   sizeof(dstInfo->data_int32));
+
+            break;
+        }
+
+        default:
+        {
+            CHECK_GE((int32_t)src.sensorType,
+                     (int32_t)SensorType::SENSOR_TYPE_DEVICE_PRIVATE_BASE);
+
+            memcpy(dst->data, src.u.data.data(), 16 * sizeof(float));
+            break;
+        }
+    }
+}
+
+}  // namespace implementation
+}  // namespace V1_0
+}  // namespace sensors
+}  // namespace hardware
+}  // namespace android
+
diff --git a/sensors/1.0/default/include/convert.h b/sensors/1.0/default/include/convert.h
new file mode 100644
index 0000000..d289a81
--- /dev/null
+++ b/sensors/1.0/default/include/convert.h
@@ -0,0 +1,42 @@
+/*
+ * Copyright (C) 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef HARDWARE_INTERFACES_SENSORS_V1_0_DEFAULT_INCLUDE_CONVERT_H_
+
+#define HARDWARE_INTERFACES_SENSORS_V1_0_DEFAULT_INCLUDE_CONVERT_H_
+
+#include <android/hardware/sensors/1.0/ISensors.h>
+#include <hardware/sensors.h>
+
+namespace android {
+namespace hardware {
+namespace sensors {
+namespace V1_0 {
+namespace implementation {
+
+void convertFromSensor(const sensor_t &src, SensorInfo *dst);
+void convertToSensor(const SensorInfo &src, sensor_t *dst);
+
+void convertFromSensorEvent(const sensors_event_t &src, Event *dst);
+void convertToSensorEvent(const Event &src, sensors_event_t *dst);
+
+}  // namespace implementation
+}  // namespace V1_0
+}  // namespace sensors
+}  // namespace hardware
+}  // namespace android
+
+#endif  // HARDWARE_INTERFACES_SENSORS_V1_0_DEFAULT_INCLUDE_CONVERT_H_
diff --git a/sensors/1.0/default/service.cpp b/sensors/1.0/default/service.cpp
new file mode 100644
index 0000000..da543ef
--- /dev/null
+++ b/sensors/1.0/default/service.cpp
@@ -0,0 +1,51 @@
+/*
+ * Copyright (C) 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <android-base/logging.h>
+#include <android/hardware/sensors/1.0/ISensors.h>
+#include <hwbinder/IPCThreadState.h>
+#include <hwbinder/ProcessState.h>
+
+int main() {
+    using android::hardware::sensors::V1_0::ISensors;
+    using android::sp;
+    using android::OK;
+    using namespace android::hardware;
+
+    LOG(INFO) << "Service is starting.";
+    sp<ISensors> sensors = ISensors::getService("sensors", true /* getStub */);
+
+    if (sensors.get() == nullptr) {
+        LOG(ERROR) << "ISensors::getService returned nullptr, exiting.";
+        return 1;
+    }
+
+    LOG(INFO) << "Default implementation using sensors is "
+              << (sensors->isRemote() ? "REMOTE" : "LOCAL");
+
+    CHECK(!sensors->isRemote());
+
+    LOG(INFO) << "Registering instance sensors.";
+    sensors->registerAsService("sensors");
+    LOG(INFO) << "Ready.";
+
+    ProcessState::self()->setThreadPoolMaxThreadCount(0);
+    ProcessState::self()->startThreadPool();
+    IPCThreadState::self()->joinThreadPool();
+
+    return 0;
+}
+
diff --git a/sensors/1.0/types.hal b/sensors/1.0/types.hal
new file mode 100644
index 0000000..ba4921c
--- /dev/null
+++ b/sensors/1.0/types.hal
@@ -0,0 +1,1064 @@
+/*
+ * Copyright (C) 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.sensors@1.0;
+
+/**
+ * Please see the Sensors section of source.android.com for an
+ * introduction to and detailed descriptions of Android sensor types:
+ * http://source.android.com/devices/sensors/index.html
+ */
+
+/* Type enumerating various result codes returned from ISensors methods */
+enum Result : int32_t {
+    OK,
+    BAD_VALUE,
+    PERMISSION_DENIED,
+    INVALID_OPERATION,
+};
+
+/*
+ * Sensor HAL modes used in setOperationMode method
+ */
+@export(name="")
+enum OperationMode : int32_t {
+    SENSOR_HAL_NORMAL_MODE              = 0,
+    SENSOR_HAL_DATA_INJECTION_MODE      = 1,
+};
+
+/*
+ * Sensor type
+ *
+ * Each sensor has a type which defines what this sensor measures and how
+ * measures are reported. See the Base sensors and Composite sensors lists
+ * for complete descriptions:
+ * http://source.android.com/devices/sensors/base_triggers.html
+ * http://source.android.com/devices/sensors/composite_sensors.html
+ *
+ * Device manufacturers (OEMs) can define their own sensor types, for
+ * their private use by applications or services provided by them. Such
+ * sensor types are specific to an OEM and can't be exposed in the SDK.
+ * These types must start at SENSOR_TYPE_DEVICE_PRIVATE_BASE.
+ *
+ * All sensors defined outside of the device private range must correspond to
+ * a type defined in this file, and must satisfy the characteristics listed in
+ * the description of the sensor type.
+ *
+ * Each sensor also has a "typeAsString".
+ *  - StringType of sensors inside of the device private range MUST be prefixed
+ *    by the sensor provider's or OEM reverse domain name. In particular, they
+ *    cannot use the "android.sensor" prefix.
+ *  - StringType of sensors outside of the device private range MUST correspond
+ *    to the one defined in this file (starting with "android.sensor").
+ *    For example, accelerometers must have
+ *      type=SENSOR_TYPE_ACCELEROMETER and
+ *      stringType=SENSOR_STRING_TYPE_ACCELEROMETER
+ *
+ * When android introduces a new sensor type that can replace an OEM-defined
+ * sensor type, the OEM must use the official sensor type and stringType on
+ * versions of the HAL that support this new official sensor type.
+ *
+ * Example (made up): Suppose Google's Glass team wants to surface a sensor
+ * detecting that Glass is on a head.
+ *  - Such a sensor is not officially supported in android KitKat
+ *  - Glass devices launching on KitKat can implement a sensor with
+ *    type = 0x10001 and stringType = "com.google.glass.onheaddetector"
+ *  - In L android release, if android decides to define
+ *    SENSOR_TYPE_ON_HEAD_DETECTOR and STRING_SENSOR_TYPE_ON_HEAD_DETECTOR,
+ *    those types should replace the Glass-team-specific types in all future
+ *    launches.
+ *  - When launching Glass on the L release, Google should now use the official
+ *    type (SENSOR_TYPE_ON_HEAD_DETECTOR) and stringType.
+ *  - This way, all applications can now use this sensor.
+ */
+
+/*
+ * Wake up sensors.
+ * Each sensor may have either or both a wake-up and a non-wake variant.
+ * When registered in batch mode, wake-up sensors will wake up the AP when
+ * their FIFOs are full or when the batch timeout expires. A separate FIFO has
+ * to be maintained for wake up sensors and non wake up sensors. The non
+ * wake-up sensors need to overwrite their FIFOs when they are full till the AP
+ * wakes up and the wake-up sensors will wake-up the AP when their FIFOs are
+ * full or when the batch timeout expires without losing events.
+ * Wake-up and non wake-up variants of each sensor can be activated at
+ * different rates independently of each other.
+ *
+ * Note: Proximity sensor and significant motion sensor which were defined in
+ * previous releases are also wake-up sensors and should be treated as such.
+ * Wake-up one-shot sensors like SIGNIFICANT_MOTION cannot be batched, hence
+ * the text about batch above doesn't apply to them. See the definitions of
+ * SENSOR_TYPE_PROXIMITY and SENSOR_TYPE_SIGNIFICANT_MOTION for more info.
+ *
+ * Set SENSOR_FLAG_WAKE_UP flag for all wake-up sensors.
+ *
+ * For example, A device can have two sensors both of SENSOR_TYPE_ACCELEROMETER
+ * and one of them can be a wake_up sensor (with SENSOR_FLAG_WAKE_UP flag set)
+ * and the other can be a regular non wake_up sensor. Both of these sensors
+ * must be activated/deactivated independently of the other.
+ */
+
+@export(name="")
+enum SensorType : int32_t {
+    /* META_DATA is a special event type used to populate the MetaData
+     * structure. It doesn't correspond to a physical sensor. Events of this
+     * type exist only inside the HAL, their primary purpose is to signal the
+     * completion of a flush request.
+     */
+    SENSOR_TYPE_META_DATA                       = 0,
+
+    /*
+     * SENSOR_TYPE_ACCELEROMETER
+     * reporting-mode: continuous
+     *
+     * All values are in SI units (m/s^2) and measure the acceleration of the
+     * device minus the force of gravity.
+     *
+     * Implement the non-wake-up version of this sensor and implement the
+     * wake-up version if the system possesses a wake up fifo.
+     */
+    SENSOR_TYPE_ACCELEROMETER                   = 1,
+
+    /*
+     * SENSOR_TYPE_GEOMAGNETIC_FIELD
+     * reporting-mode: continuous
+     *
+     * All values are in micro-Tesla (uT) and measure the geomagnetic
+     * field in the X, Y and Z axis.
+     *
+     * Implement the non-wake-up version of this sensor and implement the
+     * wake-up version if the system possesses a wake up fifo.
+     */
+    SENSOR_TYPE_GEOMAGNETIC_FIELD               = 2,
+
+    /*
+     * SENSOR_TYPE_ORIENTATION
+     * reporting-mode: continuous
+     *
+     * All values are angles in degrees.
+     *
+     * Orientation sensors return sensor events for all 3 axes at a constant
+     * rate defined by setDelay().
+     *
+     * Implement the non-wake-up version of this sensor and implement the
+     * wake-up version if the system possesses a wake up fifo.
+     */
+    SENSOR_TYPE_ORIENTATION                     = 3,
+
+    /*
+     * SENSOR_TYPE_GYROSCOPE
+     * reporting-mode: continuous
+     *
+     * All values are in radians/second and measure the rate of rotation
+     * around the X, Y and Z axis.
+     *
+     * Implement the non-wake-up version of this sensor and implement the
+     * wake-up version if the system possesses a wake up fifo.
+     */
+    SENSOR_TYPE_GYROSCOPE                       = 4,
+
+    /*
+     * SENSOR_TYPE_LIGHT
+     * reporting-mode: on-change
+     *
+     * The light sensor value is returned in SI lux units.
+     *
+     * Both wake-up and non wake-up versions are useful.
+     */
+    SENSOR_TYPE_LIGHT                           = 5,
+
+    /*
+     * SENSOR_TYPE_PRESSURE
+     * reporting-mode: continuous
+     *
+     * The pressure sensor return the athmospheric pressure in hectopascal (hPa)
+     *
+     * Implement the non-wake-up version of this sensor and implement the
+     * wake-up version if the system possesses a wake up fifo.
+     */
+    SENSOR_TYPE_PRESSURE                        = 6,
+
+    /* SENSOR_TYPE_TEMPERATURE is deprecated in the HAL */
+    SENSOR_TYPE_TEMPERATURE                     = 7,
+
+    /*
+     * SENSOR_TYPE_PROXIMITY
+     * reporting-mode: on-change
+     *
+     * The proximity sensor which turns the screen off and back on during calls
+     * is the wake-up proximity sensor. Implement wake-up proximity sensor
+     * before implementing a non wake-up proximity sensor. For the wake-up
+     * proximity sensor set the flag SENSOR_FLAG_WAKE_UP.
+     * The value corresponds to the distance to the nearest object in
+     * centimeters.
+     */
+    SENSOR_TYPE_PROXIMITY                       = 8,
+
+    /*
+     * SENSOR_TYPE_GRAVITY
+     * reporting-mode: continuous
+     *
+     * A gravity output indicates the direction of and magnitude of gravity in
+     * the devices's coordinates.
+     *
+     * Implement the non-wake-up version of this sensor and implement the
+     * wake-up version if the system possesses a wake up fifo.
+     */
+    SENSOR_TYPE_GRAVITY                         = 9,
+
+    /*
+     * SENSOR_TYPE_LINEAR_ACCELERATION
+     * reporting-mode: continuous
+     *
+     * Indicates the linear acceleration of the device in device coordinates,
+     * not including gravity.
+     *
+     * Implement the non-wake-up version of this sensor and implement the
+     * wake-up version if the system possesses a wake up fifo.
+     */
+    SENSOR_TYPE_LINEAR_ACCELERATION             = 10,
+
+    /*
+     * SENSOR_TYPE_ROTATION_VECTOR
+     * reporting-mode: continuous
+     *
+     * The rotation vector symbolizes the orientation of the device relative to
+     * the East-North-Up coordinates frame.
+     *
+     * Implement the non-wake-up version of this sensor and implement the
+     * wake-up version if the system possesses a wake up fifo.
+     */
+    SENSOR_TYPE_ROTATION_VECTOR                 = 11,
+
+    /*
+     * SENSOR_TYPE_RELATIVE_HUMIDITY
+     * reporting-mode: on-change
+     *
+     * A relative humidity sensor measures relative ambient air humidity and
+     * returns a value in percent.
+     *
+     * Both wake-up and non wake-up versions are useful.
+     */
+    SENSOR_TYPE_RELATIVE_HUMIDITY               = 12,
+
+    /*
+     * SENSOR_TYPE_AMBIENT_TEMPERATURE
+     * reporting-mode: on-change
+     *
+     * The ambient (room) temperature in degree Celsius.
+     *
+     * Both wake-up and non wake-up versions are useful.
+     */
+    SENSOR_TYPE_AMBIENT_TEMPERATURE             = 13,
+
+    /*
+     * SENSOR_TYPE_MAGNETIC_FIELD_UNCALIBRATED
+     * reporting-mode: continuous
+     *
+     * Similar to SENSOR_TYPE_MAGNETIC_FIELD, but the hard iron calibration is
+     * reported separately instead of being included in the measurement.
+     *
+     * Implement the non-wake-up version of this sensor and implement the
+     * wake-up version if the system possesses a wake up fifo.
+     */
+    SENSOR_TYPE_MAGNETIC_FIELD_UNCALIBRATED     = 14,
+
+    /*
+     * SENSOR_TYPE_GAME_ROTATION_VECTOR
+     * reporting-mode: continuous
+     *
+     * Similar to SENSOR_TYPE_ROTATION_VECTOR, but not using the geomagnetic
+     * field.
+     *
+     * Implement the non-wake-up version of this sensor and implement the
+     * wake-up version if the system possesses a wake up fifo.
+     */
+    SENSOR_TYPE_GAME_ROTATION_VECTOR            = 15,
+
+    /*
+     * SENSOR_TYPE_GYROSCOPE_UNCALIBRATED
+     * reporting-mode: continuous
+     *
+     * All values are in radians/second and measure the rate of rotation
+     * around the X, Y and Z axis.
+     *
+     * Implement the non-wake-up version of this sensor and implement the
+     * wake-up version if the system possesses a wake up fifo.
+     */
+    SENSOR_TYPE_GYROSCOPE_UNCALIBRATED          = 16,
+
+    /*
+     * SENSOR_TYPE_SIGNIFICANT_MOTION
+     * reporting-mode: one-shot
+     *
+     * A sensor of this type triggers an event each time significant motion
+     * is detected and automatically disables itself.
+     * For Significant Motion sensor to be useful, it must be defined as a
+     * wake-up sensor. (set SENSOR_FLAG_WAKE_UP). Implement the wake-up
+     * significant motion sensor. A non wake-up version is not useful.
+     * The only allowed value to return is 1.0.
+     */
+    SENSOR_TYPE_SIGNIFICANT_MOTION              = 17,
+
+    /*
+     * SENSOR_TYPE_STEP_DETECTOR
+     * reporting-mode: special
+     *
+     * A sensor of this type triggers an event each time a step is taken
+     * by the user. The only allowed value to return is 1.0 and an event
+     * is generated for each step.
+     *
+     * Both wake-up and non wake-up versions are useful.
+     */
+    SENSOR_TYPE_STEP_DETECTOR                   = 18,
+
+    /*
+     * SENSOR_TYPE_STEP_COUNTER
+     * reporting-mode: on-change
+     *
+     * A sensor of this type returns the number of steps taken by the user since
+     * the last reboot while activated. The value is returned as a uint64_t and
+     * is reset to zero only on a system / android reboot.
+     *
+     * Implement the non-wake-up version of this sensor and implement the
+     * wake-up version if the system possesses a wake up fifo.
+     */
+    SENSOR_TYPE_STEP_COUNTER                    = 19,
+
+    /*
+     * SENSOR_TYPE_GEOMAGNETIC_ROTATION_VECTOR
+     * reporting-mode: continuous
+     *
+     *  Similar to SENSOR_TYPE_ROTATION_VECTOR, but using a magnetometer instead
+     *  of using a gyroscope.
+     *
+     * Implement the non-wake-up version of this sensor and implement the
+     * wake-up version if the system possesses a wake up fifo.
+     */
+    SENSOR_TYPE_GEOMAGNETIC_ROTATION_VECTOR     = 20,
+
+    /*
+     * SENSOR_TYPE_HEART_RATE
+     * reporting-mode: on-change
+     *
+     *  A sensor of this type returns the current heart rate.
+     *  The events contain the current heart rate in beats per minute (BPM) and
+     *  the status of the sensor during the measurement. See "HeartRate" below
+     *  for more details.
+     *
+     *  Because this sensor is on-change, events must be generated when and only
+     *  when heart_rate.bpm or heart_rate.status have changed since the last
+     *  event. In particular, upon the first activation, unless the device is
+     *  known to not be on the body, the status field of the first event must be
+     *  set to SENSOR_STATUS_UNRELIABLE. The event should be generated no faster
+     *  than every period_ns passed to setDelay() or to batch().
+     *  See the definition of the on-change reporting mode for more information.
+     *
+     *  SensorInfo.requiredPermission must be set to
+     *  SENSOR_PERMISSION_BODY_SENSORS.
+     *
+     *  Both wake-up and non wake-up versions are useful.
+     */
+    SENSOR_TYPE_HEART_RATE                      = 21,
+
+    /*
+     * SENSOR_TYPE_WAKE_UP_TILT_DETECTOR
+     * reporting-mode: special (setDelay has no impact)
+     *
+     * A sensor of this type generates an event each time a tilt event is
+     * detected. A tilt event should be generated if the direction of the
+     * 2-seconds window average gravity changed by at least 35 degrees since the
+     * activation or the last trigger of the sensor.
+     *
+     *  reference_estimated_gravity = average of accelerometer measurements over
+     *  the first 1 second after activation or the estimated gravity at the last
+     *  trigger.
+     *
+     *  current_estimated_gravity = average of accelerometer measurements over
+     *  the last 2 seconds.
+     *
+     *  trigger when
+     *     angle(reference_estimated_gravity, current_estimated_gravity)
+     *       > 35 degrees
+     *
+     * Large accelerations without a change in phone orientation should not
+     * trigger a tilt event.
+     * For example, a sharp turn or strong acceleration while driving a car
+     * should not trigger a tilt event, even though the angle of the average
+     * acceleration might vary by more than 35 degrees.
+     *
+     * Typically, this sensor is implemented with the help of only an
+     * accelerometer. Other sensors can be used as well if they do not increase
+     * the power consumption significantly. This is a low power sensor that
+     * should allow the AP to go into suspend mode. Do not emulate this sensor
+     * in the HAL.
+     * Like other wake up sensors, the driver is expected to a hold a wake_lock
+     * with a timeout of 200 ms while reporting this event. The only allowed
+     * return value is 1.0.
+     *
+     * Implement only the wake-up version of this sensor.
+     */
+    SENSOR_TYPE_TILT_DETECTOR                   = 22,
+
+    /*
+     * SENSOR_TYPE_WAKE_GESTURE
+     * reporting-mode: one-shot
+     *
+     * A sensor enabling waking up the device based on a device specific motion.
+     *
+     * When this sensor triggers, the device behaves as if the power button was
+     * pressed, turning the screen on. This behavior (turning on the screen when
+     * this sensor triggers) might be deactivated by the user in the device
+     * settings. Changes in settings do not impact the behavior of the sensor:
+     * only whether the framework turns the screen on when it triggers.
+     *
+     * The actual gesture to be detected is not specified, and can be chosen by
+     * the manufacturer of the device.
+     * This sensor must be low power, as it is likely to be activated 24/7.
+     * The only allowed value to return is 1.0.
+     *
+     * Implement only the wake-up version of this sensor.
+     */
+    SENSOR_TYPE_WAKE_GESTURE                    = 23,
+
+    /*
+     * SENSOR_TYPE_GLANCE_GESTURE
+     * reporting-mode: one-shot
+     *
+     * A sensor enabling briefly turning the screen on to enable the user to
+     * glance content on screen based on a specific motion.  The device should
+     * turn the screen off after a few moments.
+     *
+     * When this sensor triggers, the device turns the screen on momentarily
+     * to allow the user to glance notifications or other content while the
+     * device remains locked in a non-interactive state (dozing). This behavior
+     * (briefly turning on the screen when this sensor triggers) might be
+     * deactivated by the user in the device settings.
+     * Changes in settings do not impact the behavior of the sensor: only
+     * whether the framework briefly turns the screen on when it triggers.
+     *
+     * The actual gesture to be detected is not specified, and can be chosen by
+     * the manufacturer of the device.
+     * This sensor must be low power, as it is likely to be activated 24/7.
+     * The only allowed value to return is 1.0.
+     *
+     * Implement only the wake-up version of this sensor.
+     */
+    SENSOR_TYPE_GLANCE_GESTURE                  = 24,
+
+    /**
+     * SENSOR_TYPE_PICK_UP_GESTURE
+     * reporting-mode: one-shot
+     *
+     * A sensor of this type triggers when the device is picked up regardless of
+     * wherever is was before (desk, pocket, bag). The only allowed return value
+     * is 1.0. This sensor de-activates itself immediately after it triggers.
+     *
+     * Implement only the wake-up version of this sensor.
+     */
+    SENSOR_TYPE_PICK_UP_GESTURE                 = 25,
+
+    /*
+     * SENSOR_TYPE_WRIST_TILT_GESTURE
+     * trigger-mode: special
+     * wake-up sensor: yes
+     *
+     * A sensor of this type triggers an event each time a tilt of the
+     * wrist-worn device is detected.
+     *
+     * This sensor must be low power, as it is likely to be activated 24/7.
+     * The only allowed value to return is 1.0.
+     *
+     * Implement only the wake-up version of this sensor.
+     */
+    SENSOR_TYPE_WRIST_TILT_GESTURE              = 26,
+
+    /*
+     * SENSOR_TYPE_DEVICE_ORIENTATION
+     * reporting-mode: on-change
+     *
+     * The current orientation of the device. The value should be reported in
+     * the "scalar" element of the EventPayload in Event. The
+     * only values that can be reported are (please refer to Android Sensor
+     * Coordinate System to understand the X and Y axis direction with respect
+     * to default orientation):
+     *  - 0: device is in default orientation (Y axis is vertical and points up)
+     *  - 1: device is rotated 90 degrees counter-clockwise from default
+     *       orientation (X axis is vertical and points up)
+     *  - 2: device is rotated 180 degrees from default orientation (Y axis is
+     *       vertical and points down)
+     *  - 3: device is rotated 90 degrees clockwise from default orientation
+     *       (X axis is vertical and points down)
+     *
+     * Moving the device to an orientation where the Z axis is vertical (either
+     * up or down) should not cause a new event to be reported.
+     *
+     * To improve the user experience of this sensor, it is recommended to
+     * implement some physical (i.e., rotation angle) and temporal (i.e., delay)
+     * hysteresis.
+     * In other words, minor or transient rotations should not cause a new event
+     * to be reported.
+     *
+     * This sensor should only be implemented with the help of an accelerometer.
+     * This is a low power sensor that should reduce the number of interrupts of
+     * the AP. Do not emulate this sensor in the HAL.
+     *
+     * Both wake-up and non wake-up versions are useful.
+     */
+    SENSOR_TYPE_DEVICE_ORIENTATION              = 27,
+
+    /*
+     * SENSOR_TYPE_POSE_6DOF
+     * trigger-mode: continuous
+     *
+     * A sensor of this type returns the pose of the device.
+     * Pose of the device is defined as the orientation of the device from a
+     * Earth Centered Earth Fixed frame and the translation from an arbitrary
+     * point at subscription.
+     *
+     * This sensor can be high power. It can use any and all of the following
+     *           . Accelerometer
+     *           . Gyroscope
+     *           . Camera
+     *           . Depth Camera
+     *
+     */
+    SENSOR_TYPE_POSE_6DOF                       = 28,
+
+    /*
+     * SENSOR_TYPE_STATIONARY_DETECT
+     * trigger mode: one shot
+     *
+     * A sensor of this type returns an event if the device is still/stationary
+     * for a while. The period of time to monitor for statinarity should be
+     * greater than 5 seconds, and less than 10 seconds.
+     *
+     * Stationarity here refers to absolute stationarity. eg: device on desk.
+     *
+     * The only allowed value to return is 1.0.
+     */
+    SENSOR_TYPE_STATIONARY_DETECT               = 29,
+
+    /*
+     * SENSOR_TYPE_MOTION_DETECT
+     * trigger mode: one shot
+     *
+     * A sensor of this type returns an event if the device is not still for
+     * a while. The period of time to monitor for statinarity should be greater
+     * than 5 seconds, and less than 10 seconds.
+     *
+     * Motion here refers to any mechanism in which the device is causes to be
+     * moved in its inertial frame. eg: Pickin up the device and walking with it
+     * to a nearby room may trigger motion wherewas keeping the device on a
+     * table on a smooth train moving at constant velocity may not trigger
+     * motion.
+     *
+     * The only allowed value to return is 1.0.
+     */
+    SENSOR_TYPE_MOTION_DETECT                   = 30,
+
+    /*
+     * SENSOR_TYPE_HEART_BEAT
+     * trigger mode: continuous
+     *
+     * A sensor of this type returns an event everytime a hear beat peak is
+     * detected.
+     *
+     * Peak here ideally corresponds to the positive peak in the QRS complex of
+     * and ECG signal.
+     *
+     * The sensor is not expected to be optimized for latency. As a guide, a
+     * latency of up to 10 seconds is acceptable. However the timestamp attached
+     * to the event should be accurate and should correspond to the time the
+     * peak occured.
+     *
+     * The sensor event contains a parameter for the confidence in the detection
+     * of the peak where 0.0 represent no information at all, and 1.0 represents
+     * certainty.
+     */
+    SENSOR_TYPE_HEART_BEAT                      = 31,
+
+    /**
+     * SENSOR_TYPE_DYNAMIC_SENSOR_META
+     * trigger-mode: special
+     *
+     * A sensor event of this type is received when a dynamic sensor is added to
+     * or removed from the system. At most one sensor of this type can be
+     * present in one sensor HAL implementation and presence of a sensor of this
+     * type in sensor HAL implementation indicates that this sensor HAL supports
+     * dynamic sensor feature. Operations, such as batch, activate and setDelay,
+     * to this special purpose sensor should be treated as no-op and return
+     * successful; flush() also has to generate flush complete event as if this
+     * is a sensor that does not support batching.
+     *
+     * A dynamic sensor connection indicates connection of a physical device or
+     * instantiation of a virtual sensor backed by algorithm; and a dynamic
+     * sensor disconnection indicates the the opposite. A sensor event of
+     * SENSOR_TYPE_DYNAMIC_SENSOR_META type should be delivered regardless of
+     * the activation status of the sensor in the event of dynamic sensor
+     * connection and disconnection. In the sensor event, besides the common
+     * data entries, "dynamic_sensor_meta", which includes fields for connection
+     * status, handle of the sensor involved, pointer to sensor_t structure and
+     * a uuid field, should be populated.
+     *
+     * At a dynamic sensor connection event, fields of sensor_t structure
+     * referenced by a pointer in dynamic_sensor_meta should be filled as if it
+     * was regular sensors. Sensor HAL is responsible for recovery of memory if
+     * the corresponding data is dynamicially allocated. However, the the
+     * pointer must be valid until the first activate call to the sensor
+     * reported in this connection event. At a dynamic sensor disconnection,
+     * the sensor_t pointer should be NULL.
+     *
+     * The sensor handle assigned to dynamic sensors should never be the same as
+     * that of any regular static sensors, and should be unique until next boot.
+     * In another word, if a handle h is used for a dynamic sensor A, that same
+     * number cannot be used for the same dynamic sensor A or another dynamic
+     * sensor B even after disconnection of A until reboot.
+     *
+     * The UUID field will be used for identifying the sensor in addition to
+     * name, vendor and version and type. For physical sensors of the same
+     * model, all sensors will have the same values in sensor_t, but the UUID
+     * should be unique and persistent for each individual unit. An all zero
+     * UUID indicates it is not possible to differentiate individual sensor
+     * unit.
+     *
+     */
+    SENSOR_TYPE_DYNAMIC_SENSOR_META             = 32,
+
+    /**
+     * SENSOR_TYPE_ADDITIONAL_INFO
+     * reporting-mode: N/A
+     *
+     * This sensor type is for delivering additional sensor information aside
+     * from sensor event data.
+     * Additional information may include sensor front-end group delay, internal
+     * calibration parameters, noise level metrics, device internal temperature,
+     * etc.
+     *
+     * This type will never bind to a sensor. In other words, no sensor in the
+     * sensor list should be of the type SENSOR_TYPE_ADDITIONAL_INFO. If a
+     * sensor HAL supports sensor additional information feature, it reports
+     * sensor_event_t with "sensor" field set to handle of the reporting sensor
+     * and "type" field set to SENSOR_TYPE_ADDITIONAL_INFO. Delivery of
+     * additional information events is triggered under two conditions: an
+     * enable activate() call or a flush() call to the corresponding sensor.
+     *
+     * A single additional information report consists of multiple frames.
+     * Sequences of these frames are ordered using timestamps, which means the
+     * timestamps of sequential frames have to be at least 1 nanosecond apart
+     * from each other. Each frame is a sensor_event_t delivered through the HAL
+     * interface, with related data stored in the "additional_info" field, which
+     * is of type additional_info_event_t.
+     * The "type" field of additional_info_event_t denotes the nature of the
+     * payload data (see additional_info_type_t).
+     * The "serial" field is used to keep the sequence of payload data that
+     * spans multiple frames. The first frame of the entire report is always of
+     * type AINFO_BEGIN, and the last frame is always AINFO_END.
+     *
+     * All additional information frames have to be delivered after flush
+     * complete event if flush() was triggering the report.
+     */
+    SENSOR_TYPE_ADDITIONAL_INFO                 = 33,
+
+    /*
+     * Base for device manufacturers private sensor types.
+     * These sensor types can't be exposed in the SDK.
+     */
+    SENSOR_TYPE_DEVICE_PRIVATE_BASE             = 0x10000
+};
+
+@export(name="")
+enum SensorFlagBits : uint64_t {
+    /*
+     * Whether this sensor wakes up the AP from suspend mode when data is
+     * available.  Whenever sensor events are delivered from a wake_up sensor,
+     * the driver needs to hold a wake_lock till the events are read by the
+     * SensorService i.e till ISensors::poll() is called the next time.
+     * Once poll is called again it means events have been read by the
+     * SensorService, the driver can safely release the wake_lock. SensorService
+     * will continue to hold a wake_lock till the app actually reads the events.
+     */
+    SENSOR_FLAG_WAKE_UP                     = 1,
+
+    /*
+     * Reporting modes for various sensors. Each sensor will have exactly one of
+     * these modes set.
+     * The least significant 2nd, 3rd and 4th bits are used to represent four
+     * possible reporting modes.
+     */
+    SENSOR_FLAG_CONTINUOUS_MODE             = 0,
+    SENSOR_FLAG_ON_CHANGE_MODE              = 2,
+    SENSOR_FLAG_ONE_SHOT_MODE               = 4,
+    SENSOR_FLAG_SPECIAL_REPORTING_MODE      = 6,
+
+    /*
+     * Set this flag if the sensor supports data_injection mode and allows data
+     * to be injected from the SensorService. When in data_injection ONLY
+     * sensors with this flag set are injected sensor data and only sensors with
+     * this flag set are activated. Eg: Accelerometer and Step Counter sensors
+     * can be set with this flag and SensorService will inject accelerometer
+     * data and read the corresponding step counts.
+     */
+    SENSOR_FLAG_SUPPORTS_DATA_INJECTION     = 0x10,
+
+    /*
+     * Set this flag if the sensor is a dynamically connected sensor. See
+     * DynamicSensorInfo and DYNAMIC_SENSOR_META for details.
+     */
+    SENSOR_FLAG_DYNAMIC_SENSOR              = 0x20,
+
+    /*
+     * Set this flag if sensor additional information is supported.
+     * See ADDITIONAL_INFO and AdditionalInfo for details.
+     */
+    SENSOR_FLAG_ADDITIONAL_INFO             = 0x40,
+};
+
+struct SensorInfo {
+    /* handle that identifies this sensors. This handle is used to reference
+     * this sensor throughout the HAL API.
+     */
+    int32_t sensorHandle;
+
+    /* Name of this sensor.
+     * All sensors of the same "type" must have a different "name".
+     */
+    string name;
+
+    /* vendor of the hardware part */
+    string vendor;
+
+    /* version of the hardware part + driver. The value of this field
+     * must increase when the driver is updated in a way that changes the
+     * output of this sensor. This is important for fused sensors when the
+     * fusion algorithm is updated.
+     */
+    int32_t version;
+
+    /* this sensor's type. */
+    SensorType type;
+
+    /* type of this sensor as a string. Set to corresponding
+     * SENSOR_STRING_TYPE_*.
+     * When defining an OEM specific sensor or sensor manufacturer specific
+     * sensor, use your reserve domain name as a prefix.
+     * ex: com.google.glass.onheaddetector
+     * For sensors of known type, the android framework might overwrite this
+     * string automatically.
+     */
+    string typeAsString;
+
+    /* maximum range of this sensor's value in SI units */
+    float maxRange;
+
+    /* smallest difference between two values reported by this sensor */
+    float resolution;
+
+    /* rough estimate of this sensor's power consumption in mA */
+    float power;
+
+    /* this value depends on the reporting mode:
+     *
+     *   continuous: minimum sample period allowed in microseconds
+     *   on-change : 0
+     *   one-shot  :-1
+     *   special   : 0, unless otherwise noted
+     */
+    int32_t minDelay;
+
+    /* number of events reserved for this sensor in the batch mode FIFO.
+     * If there is a dedicated FIFO for this sensor, then this is the
+     * size of this FIFO. If the FIFO is shared with other sensors,
+     * this is the size reserved for that sensor and it can be zero.
+     */
+    uint32_t fifoReservedEventCount;
+
+    /* maximum number of events of this sensor that could be batched.
+     * This is especially relevant when the FIFO is shared between
+     * several sensors; this value is then set to the size of that FIFO.
+     */
+    uint32_t fifoMaxEventCount;
+
+    /* permission required to see this sensor, register to it and receive data.
+     * Set to "" if no permission is required. Some sensor types like the
+     * heart rate monitor have a mandatory require_permission.
+     * For sensors that always require a specific permission, like the heart
+     * rate monitor, the android framework might overwrite this string
+     * automatically.
+     */
+    string requiredPermission;
+
+    /* This value is defined only for continuous mode and on-change sensors.
+     * It is the delay between two sensor events corresponding to the lowest
+     * frequency that this sensor supports. When lower frequencies are requested
+     * through batch()/setDelay() the events will be generated at this frequency
+     * instead.
+     * It can be used by the framework or applications to estimate when the
+     * batch FIFO may be full.
+     *
+     * NOTE: periodNs is in nanoseconds where as maxDelay/minDelay are in
+     *       microseconds.
+     *
+     *       continuous, on-change: maximum sampling period allowed in
+     *                              microseconds.
+     *
+     *          one-shot, special : 0
+     */
+    int32_t maxDelay;
+
+    /* Bitmask of SensorFlagBits */
+    uint64_t flags;
+};
+
+@export(name="")
+enum SensorStatus : int8_t {
+    SENSOR_STATUS_NO_CONTACT      = -1,
+    SENSOR_STATUS_UNRELIABLE      = 0,
+    SENSOR_STATUS_ACCURACY_LOW    = 1,
+    SENSOR_STATUS_ACCURACY_MEDIUM = 2,
+    SENSOR_STATUS_ACCURACY_HIGH   = 3,
+};
+
+struct Vec3 {
+    float x;
+    float y;
+    float z;
+    SensorStatus status;
+};
+
+struct Vec4 {
+    float x;
+    float y;
+    float z;
+    float w;
+};
+
+struct Uncal {
+    float x;
+    float y;
+    float z;
+    float x_bias;
+    float y_bias;
+    float z_bias;
+};
+
+struct HeartRate {
+    /* Heart rate in beats per minute.
+     * Set to 0 when status is SENSOR_STATUS_UNRELIABLE or ..._NO_CONTACT
+     */
+    float bpm;
+
+    /* Status of the sensor for this reading. Set to one SENSOR_STATUS_...
+     * Note that this value should only be set for sensors that explicitly
+     * define the meaning of this field. This field is not piped through the
+     * framework for other sensors.
+     */
+    SensorStatus status;
+};
+
+@export(name="")
+enum MetaDataEventType : uint32_t {
+    META_DATA_FLUSH_COMPLETE = 1,
+};
+
+struct MetaData {
+    MetaDataEventType what;
+};
+
+struct DynamicSensorInfo {
+    bool connected;
+    int32_t sensorHandle;
+
+    /* UUID of a dynamic sensor (using RFC 4122 byte order)
+     * For UUID 12345678-90AB-CDEF-1122-334455667788 the uuid field should be
+     * initialized as:
+     *   {0x12, 0x34, 0x56, 0x78, 0x90, 0xAB, 0xCD, 0xEF, 0x11, ...}
+     */
+    uint8_t[16] uuid;
+};
+
+@export(name="additional_info_type_t")
+enum AdditionalInfoType : uint32_t {
+    /* Marks the beginning of additional information frames */
+    AINFO_BEGIN                       = 0,
+
+    /* Marks the end of additional information frames */
+    AINFO_END                         = 1,
+
+    /* Estimation of the delay that is not tracked by sensor timestamps. This
+     * includes delay introduced by sensor front-end filtering, data transport,
+     * etc.
+     * float[2]: delay in seconds, standard deviation of estimated value
+     */
+    AINFO_UNTRACKED_DELAY             = 0x10000,
+
+    /* float: Celsius temperature */
+    AINFO_INTERNAL_TEMPERATURE,
+
+    /* First three rows of a homogeneous matrix, which represents calibration to
+     * a three-element vector raw sensor reading.
+     * float[12]: 3x4 matrix in row major order
+     */
+    AINFO_VEC3_CALIBRATION,
+
+    /* Location and orientation of sensor element in the device frame: origin is
+     * the geometric center of the mobile device screen surface; the axis
+     * definition corresponds to Android sensor definitions.
+     * float[12]: 3x4 matrix in row major order
+     */
+    AINFO_SENSOR_PLACEMENT,
+
+    /* float[2]: raw sample period in seconds,
+     *           standard deviation of sampling period
+     */
+    AINFO_SAMPLING,
+
+    /* Sampling channel modeling information
+     * int32_t: noise type
+     * float[n]: parameters
+     */
+    AINFO_CHANNEL_NOISE               = 0x20000,
+
+    /* float[3]: sample period, standard deviation of sample period,
+     * quantization unit
+     */
+    AINFO_CHANNEL_SAMPLER,
+
+    /* Represents a filter:
+     *   \sum_j a_j y[n-j] == \sum_i b_i x[n-i]
+     *
+     * int32_t[3]: number of feedforward coeffients M,
+     *             number of feedback coefficients N (for FIR filter, N = 1).
+     *             bit mask that represents which element the filter is applied
+     *             to. (bit 0==1 means this filter applies to vector element 0).
+     * float[M+N]: filter coefficients (b0, b1, ..., b_{M-1}), then
+     *             (a0, a1, ..., a_{N-1}), a0 is always 1.
+     *
+     * Multiple frames may be needed for higher number of taps.
+     */
+    AINFO_CHANNEL_FILTER,
+
+    /* int32_t[2]: size in (row, column) ... 1st frame
+     * float[n]: matrix element values in row major order.
+     */
+    AINFO_CHANNEL_LINEAR_TRANSFORM,
+
+    /* int32_t[2]: extrapolate method, interpolate method
+     * float[n]: mapping key points in paris, (in, out)...
+     *           (may be used to model saturation).
+     */
+    AINFO_CHANNEL_NONLINEAR_MAP,
+
+    /* int32_t: resample method (0-th order, 1st order...)
+     * float[1]: resample ratio (upsampling if < 1.0, downsampling if > 1.0).
+     */
+    AINFO_CHANNEL_RESAMPLER,
+
+    /* Custom information */
+    AINFO_CUSTOM_START                = 0x10000000,
+
+    /* Debugging */
+    AINFO_DEBUGGING_START             = 0x40000000,
+};
+
+struct AdditionalInfo {
+    /* type of payload data, see AdditionalInfoType */
+    AdditionalInfoType type;
+
+    /* sequence number of this frame for this type */
+    int32_t serial;
+
+    union Payload {
+        /* for each frame, a single data type, either int32_t or float,
+         * should be used.
+         */
+        int32_t[14] data_int32;
+        float[14] data_float;
+    } u;
+};
+
+/* acceleration values are in meter per second per second (m/s^2)
+ * magnetic vector values are in micro-Tesla (uT)
+ * orientation values are in degrees
+ * gyroscope values are in rad/s
+ * temperature is in degrees centigrade (Celsius)
+ * distance in centimeters
+ * light in SI lux units
+ * pressure in hectopascal (hPa)
+ * relative humidity in percent
+ */
+union EventPayload {
+    /* SENSOR_TYPE_ACCELEROMETER, SENSOR_TYPE_GEOMAGNETIC_FIELD,
+     * SENSOR_TYPE_ORIENTATION, SENSOR_TYPE_GYROSCOPE, SENSOR_TYPE_GRAVITY,
+     * SENSOR_TYPE_LINEAR_ACCELERATION
+     */
+    Vec3 vec3;
+
+    /* SENSOR_TYPE_ROTATION_VECTOR, SENSOR_TYPE_GAME_ROTATION_VECTOR,
+     * SENSOR_TYPE_GEOMAGNETIC_ROTATION_VECTOR
+     */
+    Vec4 vec4;
+
+    /* SENSOR_TYPE_MAGNETIC_FIELD_UNCALIBRATED,
+     * SENSOR_TYPE_GYROSCOPE_UNCALIBRATED
+     */
+    Uncal uncal;
+
+    /* SENSOR_TYPE_META_DATA */
+    MetaData meta;
+
+    /* SENSOR_TYPE_DEVICE_ORIENTATION, SENSOR_TYPE_LIGHT, SENSOR_TYPE_PRESSURE,
+     * SENSOR_TYPE_TEMPERATURE, SENSOR_TYPE_PROXIMITY,
+     * SENSOR_TYPE_RELATIVE_HUMIDITY, SENSOR_TYPE_AMBIENT_TEMPERATURE,
+     * SENSOR_TYPE_SIGNIFICANT_MOTION, SENSOR_TYPE_STEP_DETECTOR,
+     * SENSOR_TYPE_TILT_DETECTOR, SENSOR_TYPE_WAKE_GESTURE,
+     * SENSOR_TYPE_GLANCE_GESTURE, SENSOR_TYPE_PICK_UP_GESTURE,
+     * SENSOR_TYPE_WRIST_TILT_GESTURE, SENSOR_TYPE_STATIONARY_DETECT,
+     * SENSOR_TYPE_MOTION_DETECT, SENSOR_TYPE_HEART_BEAT
+     */
+    float scalar;
+
+    /* SENSOR_TYPE_STEP_COUNTER */
+    uint64_t stepCount;
+
+    /* SENSOR_TYPE_HEART_RATE */
+    HeartRate heartRate;
+
+    /* SENSOR_TYPE_POSE_6DOF */
+    float[15] pose6DOF;
+
+    /* SENSOR_TYPE_DYNAMIC_SENSOR_META */
+    DynamicSensorInfo dynamic;
+
+    /* SENSOR_TYPE_ADDITIONAL_INFO */
+    AdditionalInfo additional;
+
+    /* undefined/custom sensor type, >= SENSOR_TYPE_DEVICE_PRIVATE_BASE */
+    float[16] data;
+};
+
+struct Event {
+    /* Time measured in nanoseconds, in "elapsedRealtimeNano()'s" timebase. */
+    int64_t timestamp;
+
+    /* sensor identifier */
+    int32_t sensorHandle;
+
+    SensorType sensorType;
+
+    /* Union discriminated on sensorType */
+    EventPayload u;
+};
diff --git a/soundtrigger/2.0/Android.bp b/soundtrigger/2.0/Android.bp
new file mode 100644
index 0000000..10a917b
--- /dev/null
+++ b/soundtrigger/2.0/Android.bp
@@ -0,0 +1,55 @@
+// This file is autogenerated by hidl-gen. Do not edit manually.
+
+genrule {
+    name: "android.hardware.soundtrigger@2.0_genc++",
+    tool: "hidl-gen",
+    cmd: "$tool -o $genDir -Lc++ -randroid.hardware:hardware/interfaces android.hardware.soundtrigger@2.0",
+    srcs: [
+        "types.hal",
+        "ISoundTriggerHw.hal",
+        "ISoundTriggerHwCallback.hal",
+    ],
+    out: [
+        "android/hardware/soundtrigger/2.0/types.cpp",
+        "android/hardware/soundtrigger/2.0/SoundTriggerHwAll.cpp",
+        "android/hardware/soundtrigger/2.0/SoundTriggerHwCallbackAll.cpp",
+    ],
+}
+
+genrule {
+    name: "android.hardware.soundtrigger@2.0_genc++_headers",
+    tool: "hidl-gen",
+    cmd: "$tool -o $genDir -Lc++ -randroid.hardware:hardware/interfaces android.hardware.soundtrigger@2.0",
+    srcs: [
+        "types.hal",
+        "ISoundTriggerHw.hal",
+        "ISoundTriggerHwCallback.hal",
+    ],
+    out: [
+        "android/hardware/soundtrigger/2.0/types.h",
+        "android/hardware/soundtrigger/2.0/ISoundTriggerHw.h",
+        "android/hardware/soundtrigger/2.0/IHwSoundTriggerHw.h",
+        "android/hardware/soundtrigger/2.0/BnSoundTriggerHw.h",
+        "android/hardware/soundtrigger/2.0/BpSoundTriggerHw.h",
+        "android/hardware/soundtrigger/2.0/BsSoundTriggerHw.h",
+        "android/hardware/soundtrigger/2.0/ISoundTriggerHwCallback.h",
+        "android/hardware/soundtrigger/2.0/IHwSoundTriggerHwCallback.h",
+        "android/hardware/soundtrigger/2.0/BnSoundTriggerHwCallback.h",
+        "android/hardware/soundtrigger/2.0/BpSoundTriggerHwCallback.h",
+        "android/hardware/soundtrigger/2.0/BsSoundTriggerHwCallback.h",
+    ],
+}
+
+cc_library_shared {
+    name: "android.hardware.soundtrigger@2.0",
+    generated_sources: ["android.hardware.soundtrigger@2.0_genc++"],
+    generated_headers: ["android.hardware.soundtrigger@2.0_genc++_headers"],
+    export_generated_headers: ["android.hardware.soundtrigger@2.0_genc++_headers"],
+    shared_libs: [
+        "libhidl",
+        "libhwbinder",
+        "libutils",
+        "libcutils",
+        "android.hardware.audio.common@2.0",
+    ],
+}
diff --git a/soundtrigger/2.0/ISoundTriggerHw.hal b/soundtrigger/2.0/ISoundTriggerHw.hal
new file mode 100644
index 0000000..a1be85d
--- /dev/null
+++ b/soundtrigger/2.0/ISoundTriggerHw.hal
@@ -0,0 +1,215 @@
+/*
+ * Copyright 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.soundtrigger@2.0;
+
+import android.hardware.audio.common@2.0;
+
+import ISoundTriggerHwCallback;
+
+interface ISoundTriggerHw {
+
+    /*
+     * Sound trigger implementation descriptor read by the framework via
+     * getProperties(). Used by SoundTrigger service to report to applications
+     * and manage concurrency and policy.
+     */
+    struct Properties {
+        /* Implementor name */
+        string   implementor;
+        /* Implementation description */
+        string   description;
+        /* Implementation version */
+        uint32_t version;
+        /* Unique implementation ID. The UUID must change with each version of
+           the engine implementation */
+        Uuid     uuid;
+        /* Maximum number of concurrent sound models loaded */
+        uint32_t maxSoundModels;
+        /* Maximum number of key phrases */
+        uint32_t maxKeyPhrases;
+        /* Maximum number of concurrent users detected */
+        uint32_t maxUsers;
+        /* All supported modes. e.g RecognitionMode.VOICE_TRIGGER */
+        uint32_t recognitionModes;
+        /* Supports seamless transition from detection to capture */
+        bool     captureTransition;
+        /* Maximum buffering capacity in ms if captureTransition is true */
+        uint32_t maxBufferMs;
+        /* Supports capture by other use cases while detection is active */
+        bool     concurrentCapture;
+        /* Returns the trigger capture in event */
+        bool     triggerInEvent;
+        /* Rated power consumption when detection is active with TDB
+         * silence/sound/speech ratio */
+        uint32_t powerConsumptionMw;
+    };
+
+
+    /*
+     * Base sound model descriptor. This struct is the header of a larger block
+     * passed to loadSoundModel() and contains the binary data of the
+     * sound model.
+     */
+    struct SoundModel {
+        /* Model type. e.g. SoundModelType.KEYPHRASE */
+        SoundModelType type;
+        /* Unique sound model ID. */
+        Uuid           uuid;
+        /* Unique vendor ID. Identifies the engine the sound model
+         * was build for */
+        Uuid           vendorUuid;
+        /* Opaque data transparent to Android framework */
+        vec<uint8_t>   data;
+    };
+
+    /* Key phrase descriptor */
+    struct Phrase {
+        /* Unique keyphrase ID assigned at enrollment time */
+        uint32_t      id;
+        /* Recognition modes supported by this key phrase */
+        uint32_t      recognitionModes;
+        /* List of users IDs associated with this key phrase */
+        vec<uint32_t> users;
+        /* Locale - Java Locale style (e.g. en_US) */
+        string        locale;
+        /* Phrase text in UTF-8 format. */
+        string        text;
+    };
+
+    /*
+     * Specialized sound model for key phrase detection.
+     * Proprietary representation of key phrases in binary data must match
+     * information indicated by phrases field
+     */
+    struct PhraseSoundModel {
+        /* Common part of sound model descriptor */
+        SoundModel  common;
+        /* List of descriptors for key phrases supported by this sound model */
+        vec<Phrase> phrases;
+    };
+
+    /*
+     * Configuration for sound trigger capture session passed to
+     * startRecognition() method
+     */
+    struct RecognitionConfig {
+        /* IO handle that will be used for capture. N/A if captureRequested
+         * is false */
+        AudioIoHandle   captureHandle;
+        /* Input device requested for detection capture */
+        AudioDevice     captureDevice;
+        /* Capture and buffer audio for this recognition instance */
+        bool            captureRequested;
+        /* Configuration for each key phrase */
+        vec<PhraseRecognitionExtra> phrases;
+        /* Opaque capture configuration data transparent to the framework */
+        vec<uint8_t>    data;
+    };
+
+
+    /*
+     * Retrieve implementation properties.
+     * @return retval Operation completion status: 0 in case of success,
+     *                -ENODEV in case of initialization error.
+     * @return properties A Properties structure containing implementation
+     *                    description and capabilities.
+     */
+    getProperties() generates (int32_t retval, Properties properties);
+
+    /*
+     * Load a sound model. Once loaded, recognition of this model can be
+     * started and stopped. Only one active recognition per model at a time.
+     * The SoundTrigger service must handle concurrent recognition requests by
+     * different users/applications on the same model.
+     * The implementation returns a unique handle used by other functions
+     * (unloadSoundModel(), startRecognition(), etc...
+     * @param soundModel A SoundModel structure describing the sound model to
+     *                   load.
+     * @param callback The callback interface on which the soundmodelCallback()
+     *                 method will be called upon completion.
+     * @param cookie The value of the cookie argument passed to the completion
+     *               callback. This unique context information is assigned and
+     *               used only by the framework.
+     * @return retval Operation completion status: 0 in case of success,
+     *                -EINVAL in case of invalid sound model (e.g 0 data size),
+     *                -ENOSYS in case of invalid operation (e.g max number of
+     *                models exceeded),
+     *                -ENOMEM in case of memory allocation failure,
+     *                -ENODEV in case of initialization error.
+     * @return modelHandle A unique handle assigned by the HAL for use by the
+     *                framework when controlling activity for this sound model.
+     */
+    loadSoundModel(SoundModel soundModel,
+                   ISoundTriggerHwCallback callback,
+                   CallbackCookie cookie)
+            generates (int32_t retval, SoundModelHandle modelHandle);
+
+    /*
+     * Unload a sound model. A sound model may be unloaded to make room for a
+     * new one to overcome implementation limitations.
+     * @param modelHandle the handle of the sound model to unload
+     * @return retval Operation completion status: 0 in case of success,
+     *                -ENOSYS if the model is not loaded,
+     *                -ENODEV in case of initialization error.
+     */
+    unloadSoundModel(SoundModelHandle modelHandle)
+            generates (int32_t retval);
+
+    /*
+     * Start recognition on a given model. Only one recognition active
+     * at a time per model. Once recognition succeeds of fails, the callback
+     * is called.
+     * @param modelHandle the handle of the sound model to use for recognition
+     * @param config A RecognitionConfig structure containing attributes of the
+     *               recognition to perform
+     * @param callback The callback interface on which the recognitionCallback()
+     *                 method must be called upon recognition.
+     * @param cookie The value of the cookie argument passed to the recognition
+     *               callback. This unique context information is assigned and
+     *               used only by the framework.
+     * @return retval Operation completion status: 0 in case of success,
+     *                -EINVAL in case of invalid recognition attributes,
+     *                -ENOSYS in case of invalid model handle,
+     *                -ENOMEM in case of memory allocation failure,
+     *                -ENODEV in case of initialization error.
+     */
+    startRecognition(SoundModelHandle modelHandle,
+                     RecognitionConfig config,
+                     ISoundTriggerHwCallback callback,
+                     CallbackCookie cookie)
+            generates (int32_t retval);
+
+    /*
+     * Stop recognition on a given model.
+     * The implementation must not call the recognition callback when stopped
+     * via this method.
+     * @param modelHandle The handle of the sound model to use for recognition
+     * @return retval Operation completion status: 0 in case of success,
+     *                -ENOSYS in case of invalid model handle,
+     *                -ENODEV in case of initialization error.
+     */
+    stopRecognition(SoundModelHandle modelHandle)
+            generates (int32_t retval);
+
+    /*
+     * Stop recognition on all models.
+     * @return retval Operation completion status: 0 in case of success,
+     *                -ENODEV in case of initialization error.
+     */
+    stopAllRecognitions()
+            generates (int32_t retval);
+};
diff --git a/soundtrigger/2.0/ISoundTriggerHwCallback.hal b/soundtrigger/2.0/ISoundTriggerHwCallback.hal
new file mode 100644
index 0000000..294d451
--- /dev/null
+++ b/soundtrigger/2.0/ISoundTriggerHwCallback.hal
@@ -0,0 +1,103 @@
+/*
+ * Copyright 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.soundtrigger@2.0;
+
+import android.hardware.audio.common@2.0;
+
+interface ISoundTriggerHwCallback {
+    enum RecognitionStatus : uint32_t {
+        SUCCESS  = 0,
+        ABORT    = 1,
+        FAILURE  = 2,
+    };
+
+    enum SoundModelStatus : uint32_t {
+        UPDATED  = 0,
+    };
+
+    /*
+     * Generic recognition event sent via recognition callback
+     */
+    struct RecognitionEvent {
+        /* Recognition status e.g. SUCCESS */
+        RecognitionStatus status;
+        /* Sound model type for this event. e.g SoundModelType.TYPE_KEYPHRASE */
+        SoundModelType    type;
+        /* Handle of loaded sound model which triggered the event */
+        SoundModelHandle  model;
+        /* It is possible to capture audio from this */
+        /* utterance buffered by the implementation */
+        bool              captureAvailable;
+        /* Audio session ID. framework use */
+        int32_t           captureSession;
+        /* Delay in ms between end of model detection and start of audio
+        /* available for capture. A negative value is possible
+         * (e.g. if key phrase is also available for capture */
+        int32_t           captureDelayMs;
+        /* Duration in ms of audio captured before the start of the trigger.
+         * 0 if none. */
+        int32_t           capturePreambleMs;
+        /* The opaque data is the capture of the trigger sound */
+        bool              triggerInData;
+        /* Audio format of either the trigger in event data or to use for
+         * capture of the rest of the utterance */
+        AudioConfig       audioConfig;
+        /* Opaque event data */
+        vec<uint8_t>      data;
+    };
+
+    /*
+     * Specialized recognition event for key phrase recognitions
+     */
+    struct PhraseRecognitionEvent {
+        /* Common part of the recognition event */
+        RecognitionEvent common;
+        /* List of descriptors for each recognized key phrase */
+        vec<PhraseRecognitionExtra> phraseExtras;
+    };
+
+    /*
+     * Event sent via load sound model callback
+     */
+    struct ModelEvent {
+         /* Sound model status e.g. SoundModelStatus.UPDATED */
+        SoundModelStatus status;
+        /* Loaded sound model that triggered the event */
+        SoundModelHandle model;
+        /* Opaque event data, passed transparently by the framework */
+        vec<uint8_t>     data;
+    };
+
+    typedef int32_t CallbackCookie;
+
+    /*
+     * Callback method called by the HAL when the sound recognition triggers
+     * @param event A RecognitionEvent structure containing detailed results
+     *              of the recognition triggered
+     * @param cookie The cookie passed by the framework when recognition was
+     *               started (see ISoundtriggerHw.startRecognition()
+     */
+    recognitionCallback(RecognitionEvent event, CallbackCookie cookie);
+    /*
+     * Callback method called by the HAL when the sound model loading completes
+     * @param event A ModelEvent structure containing detailed results of the
+     *              model loading operation
+     * @param cookie The cookie passed by the framework when loading was
+     *               initiated (see ISoundtriggerHw.loadSoundModel()
+     */
+    soundModelCallback(ModelEvent event, CallbackCookie cookie);
+};
diff --git a/soundtrigger/2.0/types.hal b/soundtrigger/2.0/types.hal
new file mode 100644
index 0000000..26928ba
--- /dev/null
+++ b/soundtrigger/2.0/types.hal
@@ -0,0 +1,81 @@
+/*
+ * Copyright 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.soundtrigger@2.0;
+
+/*
+ * Sound model types modes used in ISoundTriggerHw.SoundModel
+ */
+enum SoundModelType : int32_t {
+    /* use for unspecified sound model type */
+    UNKNOWN   = -1,
+    /* use for key phrase sound models */
+    KEYPHRASE = 0,
+    /* use for all models other than keyphrase */
+    GENERIC   = 1,
+};
+
+typedef int32_t SoundModelHandle;
+
+
+/*
+ * Recognition modes used in ISoundTriggerHw.RecognitionConfig,
+ * ISoundTriggerHw.Properties or PhraseRecognitionExtra
+ */
+enum RecognitionMode : uint32_t {
+    /* simple voice trigger */
+    VOICE_TRIGGER       = (1 << 0),
+    /* trigger only if one user in model identified */
+    USER_IDENTIFICATION = (1 << 1),
+    /* trigger only if one user in mode authenticated */
+    USER_AUTHENTICATION = (1 << 2),
+    /* generic sound trigger */
+    GENERIC_TRIGGER     = (1 << 3),
+};
+
+/*
+ * Confidence level for each user in structure PhraseRecognitionExtra
+ */
+struct ConfidenceLevel {
+    /* user ID */
+    uint32_t userId;
+    /* confidence level in percent (0 - 100): */
+    /* - min level for recognition configuration */
+    /* - detected level for recognition event */
+    uint32_t levelPercent;
+};
+
+/*
+ * Specialized recognition event for key phrase detection
+ */
+struct PhraseRecognitionExtra {
+    /* keyphrase ID */
+    uint32_t id;
+    /* recognition modes used for this keyphrase */
+    uint32_t recognitionModes;
+    /* confidence level for mode RecognitionMode.VOICE_TRIGGER */
+    uint32_t confidenceLevel;
+    /* list of confidence levels per user for
+     * RecognitionMode.USER_IDENTIFICATION and
+     * RecognitionMode.USER_AUTHENTICATION */
+    vec<ConfidenceLevel> levels;
+};
+
+/* TODO(elaurent) remove when Java build problem is fixed */
+union Dummy {
+  uint32_t dummy1;
+  int32_t dummy2;
+};
\ No newline at end of file
diff --git a/thermal/1.0/Android.bp b/thermal/1.0/Android.bp
new file mode 100644
index 0000000..0c5dd19
--- /dev/null
+++ b/thermal/1.0/Android.bp
@@ -0,0 +1,46 @@
+// This file is autogenerated by hidl-gen. Do not edit manually.
+
+genrule {
+    name: "android.hardware.thermal@1.0_genc++",
+    tool: "hidl-gen",
+    cmd: "$tool -o $genDir -Lc++ -randroid.hardware:hardware/interfaces android.hardware.thermal@1.0",
+    srcs: [
+        "types.hal",
+        "IThermal.hal",
+    ],
+    out: [
+        "android/hardware/thermal/1.0/types.cpp",
+        "android/hardware/thermal/1.0/ThermalAll.cpp",
+    ],
+}
+
+genrule {
+    name: "android.hardware.thermal@1.0_genc++_headers",
+    tool: "hidl-gen",
+    cmd: "$tool -o $genDir -Lc++ -randroid.hardware:hardware/interfaces android.hardware.thermal@1.0",
+    srcs: [
+        "types.hal",
+        "IThermal.hal",
+    ],
+    out: [
+        "android/hardware/thermal/1.0/types.h",
+        "android/hardware/thermal/1.0/IThermal.h",
+        "android/hardware/thermal/1.0/IHwThermal.h",
+        "android/hardware/thermal/1.0/BnThermal.h",
+        "android/hardware/thermal/1.0/BpThermal.h",
+        "android/hardware/thermal/1.0/BsThermal.h",
+    ],
+}
+
+cc_library_shared {
+    name: "android.hardware.thermal@1.0",
+    generated_sources: ["android.hardware.thermal@1.0_genc++"],
+    generated_headers: ["android.hardware.thermal@1.0_genc++_headers"],
+    export_generated_headers: ["android.hardware.thermal@1.0_genc++_headers"],
+    shared_libs: [
+        "libhidl",
+        "libhwbinder",
+        "libutils",
+        "libcutils",
+    ],
+}
diff --git a/thermal/1.0/Android.mk b/thermal/1.0/Android.mk
new file mode 100644
index 0000000..47a4d61
--- /dev/null
+++ b/thermal/1.0/Android.mk
@@ -0,0 +1,306 @@
+# This file is autogenerated by hidl-gen. Do not edit manually.
+
+LOCAL_PATH := $(call my-dir)
+
+################################################################################
+
+include $(CLEAR_VARS)
+LOCAL_MODULE := android.hardware.thermal@1.0-java
+LOCAL_MODULE_CLASS := JAVA_LIBRARIES
+
+intermediates := $(local-generated-sources-dir)
+
+HIDL := $(HOST_OUT_EXECUTABLES)/hidl-gen$(HOST_EXECUTABLE_SUFFIX)
+
+#
+# Build types.hal (CoolingDevice)
+#
+GEN := $(intermediates)/android/hardware/thermal/1.0/CoolingDevice.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.thermal@1.0::types.CoolingDevice
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (CoolingType)
+#
+GEN := $(intermediates)/android/hardware/thermal/1.0/CoolingType.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.thermal@1.0::types.CoolingType
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (CpuUsage)
+#
+GEN := $(intermediates)/android/hardware/thermal/1.0/CpuUsage.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.thermal@1.0::types.CpuUsage
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (Temperature)
+#
+GEN := $(intermediates)/android/hardware/thermal/1.0/Temperature.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.thermal@1.0::types.Temperature
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (TemperatureType)
+#
+GEN := $(intermediates)/android/hardware/thermal/1.0/TemperatureType.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.thermal@1.0::types.TemperatureType
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (ThermalStatus)
+#
+GEN := $(intermediates)/android/hardware/thermal/1.0/ThermalStatus.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.thermal@1.0::types.ThermalStatus
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (ThermalStatusCode)
+#
+GEN := $(intermediates)/android/hardware/thermal/1.0/ThermalStatusCode.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.thermal@1.0::types.ThermalStatusCode
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build IThermal.hal
+#
+GEN := $(intermediates)/android/hardware/thermal/1.0/IThermal.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/IThermal.hal
+$(GEN): PRIVATE_DEPS += $(LOCAL_PATH)/types.hal
+$(GEN): $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.thermal@1.0::IThermal
+
+$(GEN): $(LOCAL_PATH)/IThermal.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+include $(BUILD_JAVA_LIBRARY)
+
+
+################################################################################
+
+include $(CLEAR_VARS)
+LOCAL_MODULE := android.hardware.thermal@1.0-java-static
+LOCAL_MODULE_CLASS := JAVA_LIBRARIES
+
+intermediates := $(local-generated-sources-dir)
+
+HIDL := $(HOST_OUT_EXECUTABLES)/hidl-gen$(HOST_EXECUTABLE_SUFFIX)
+
+#
+# Build types.hal (CoolingDevice)
+#
+GEN := $(intermediates)/android/hardware/thermal/1.0/CoolingDevice.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.thermal@1.0::types.CoolingDevice
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (CoolingType)
+#
+GEN := $(intermediates)/android/hardware/thermal/1.0/CoolingType.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.thermal@1.0::types.CoolingType
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (CpuUsage)
+#
+GEN := $(intermediates)/android/hardware/thermal/1.0/CpuUsage.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.thermal@1.0::types.CpuUsage
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (Temperature)
+#
+GEN := $(intermediates)/android/hardware/thermal/1.0/Temperature.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.thermal@1.0::types.Temperature
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (TemperatureType)
+#
+GEN := $(intermediates)/android/hardware/thermal/1.0/TemperatureType.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.thermal@1.0::types.TemperatureType
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (ThermalStatus)
+#
+GEN := $(intermediates)/android/hardware/thermal/1.0/ThermalStatus.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.thermal@1.0::types.ThermalStatus
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (ThermalStatusCode)
+#
+GEN := $(intermediates)/android/hardware/thermal/1.0/ThermalStatusCode.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.thermal@1.0::types.ThermalStatusCode
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build IThermal.hal
+#
+GEN := $(intermediates)/android/hardware/thermal/1.0/IThermal.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/IThermal.hal
+$(GEN): PRIVATE_DEPS += $(LOCAL_PATH)/types.hal
+$(GEN): $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.thermal@1.0::IThermal
+
+$(GEN): $(LOCAL_PATH)/IThermal.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+include $(BUILD_STATIC_JAVA_LIBRARY)
+
+
+
+include $(call all-makefiles-under,$(LOCAL_PATH))
diff --git a/thermal/1.0/IThermal.hal b/thermal/1.0/IThermal.hal
new file mode 100644
index 0000000..4697f32
--- /dev/null
+++ b/thermal/1.0/IThermal.hal
@@ -0,0 +1,69 @@
+/*
+ * Copyright (C) 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.thermal@1.0;
+
+interface IThermal {
+
+    /*
+     * Retrieves temperatures in Celsius.
+     *
+     * @return status Status of the operation. If status code is FAILURE,
+     *         the status.debugMessage must be populated with the human-readable
+     *         error message.
+     * @return temperatures If status code is SUCCESS, it's filled with the
+     *         current temperatures. The order of temperatures of built-in
+     *         devices (such as CPUs, GPUs and etc.) in the list must be kept
+     *         the same regardless the number of calls to this method even if
+     *         they go offline, if these devices exist on boot. The method
+     *         always returns and never removes such temperatures.
+     *
+     */
+    getTemperatures()
+        generates (ThermalStatus status, vec<Temperature> temperatures);
+
+    /*
+     * Retrieves CPU usage information of each core: active and total times
+     * in ms since first boot.
+     *
+     * @return status Status of the operation. If status code is FAILURE,
+     *         the status.debugMessage must be populated with the human-readable
+     *         error message.
+     * @return cpuUsages If status code is SUCCESS, it's filled with the current
+     *         CPU usages. The order and number of CPUs in the list must be kept
+     *         the same regardless the number of calls to this method.
+     *
+     */
+    getCpuUsages() generates (ThermalStatus status, vec<CpuUsage> cpuUsages);
+
+    /*
+     * Retrieves the cooling devices information.
+     *
+     * @return status Status of the operation. If status code is FAILURE,
+     *         the status.debugMessage must be populated with the human-readable
+     *         error message.
+     * @return devices If status code is SUCCESS, it's filled with the current
+     *         cooling device information. The order of built-in coolling
+     *         devices in the list must be kept the same regardless the number
+     *         of calls to this method even if they go offline, if these devices
+     *         exist on boot. The method always returns and never removes from
+     *         the list such coolling devices.
+     *
+     */
+    getCoolingDevices()
+        generates (ThermalStatus status, vec<CoolingDevice> devices);
+
+};
diff --git a/thermal/1.0/default/Android.bp b/thermal/1.0/default/Android.bp
new file mode 100644
index 0000000..626dcaf
--- /dev/null
+++ b/thermal/1.0/default/Android.bp
@@ -0,0 +1,16 @@
+cc_library_shared {
+    name: "android.hardware.thermal@1.0-impl",
+    relative_install_path: "hw",
+    srcs: ["Thermal.cpp"],
+    shared_libs: [
+        "liblog",
+        "libcutils",
+        "libhardware",
+        "libhwbinder",
+        "libbase",
+        "libcutils",
+        "libutils",
+        "libhidl",
+        "android.hardware.thermal@1.0",
+    ],
+}
diff --git a/thermal/1.0/default/Android.mk b/thermal/1.0/default/Android.mk
new file mode 100644
index 0000000..fa7414e
--- /dev/null
+++ b/thermal/1.0/default/Android.mk
@@ -0,0 +1,39 @@
+#
+# Copyright (C) 2016 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+LOCAL_PATH:= $(call my-dir)
+
+include $(CLEAR_VARS)
+LOCAL_MODULE_RELATIVE_PATH := hw
+LOCAL_MODULE := android.hardware.thermal@1.0-service
+LOCAL_INIT_RC := android.hardware.thermal@1.0-service.rc
+LOCAL_SRC_FILES := \
+        service.cpp \
+
+LOCAL_SHARED_LIBRARIES := \
+        liblog \
+        libcutils \
+        libdl \
+        libbase \
+        libutils \
+        libhardware_legacy \
+        libhardware \
+
+LOCAL_SHARED_LIBRARIES += \
+        libhwbinder \
+        libhidl \
+        android.hardware.thermal@1.0 \
+
+include $(BUILD_EXECUTABLE)
diff --git a/thermal/1.0/default/Thermal.cpp b/thermal/1.0/default/Thermal.cpp
new file mode 100644
index 0000000..1b91687
--- /dev/null
+++ b/thermal/1.0/default/Thermal.cpp
@@ -0,0 +1,202 @@
+/*
+ * Copyright (C) 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#define LOG_TAG "android.hardware.thermal@1.0-impl"
+#include <utils/Log.h>
+
+#include <errno.h>
+#include <hardware/hardware.h>
+#include <hardware/thermal.h>
+
+#include "Thermal.h"
+
+namespace android {
+namespace hardware {
+namespace thermal {
+namespace V1_0 {
+namespace implementation {
+
+Thermal::Thermal(thermal_module_t* module) : mModule(module) {
+}
+
+// Methods from ::android::hardware::thermal::V1_0::IThermal follow.
+Return<void> Thermal::getTemperatures(getTemperatures_cb _hidl_cb)  {
+    ThermalStatus status;
+    status.code = ThermalStatusCode::SUCCESS;
+    hidl_vec<Temperature> temperatures;
+
+    if (!mModule || !mModule->getTemperatures) {
+        ALOGI("getTemperatures is not implemented in Thermal HAL.");
+        _hidl_cb(status, temperatures);
+        return Void();
+    }
+
+    ssize_t list_size = mModule->getTemperatures(mModule, nullptr, 0);
+    if (list_size >= 0) {
+       temperature_t *list = new temperature_t[list_size];
+       ssize_t size = mModule->getTemperatures(mModule, list, list_size);
+       if (size >= 0) {
+           if (list_size > size) {
+               list_size = size;
+           }
+
+           temperatures.resize(list_size);
+           for (ssize_t i = 0; i < list_size; ++i) {
+               switch (list[i].type) {
+                   case DEVICE_TEMPERATURE_UNKNOWN:
+                       temperatures[i].type = TemperatureType::UNKNOWN;
+                       break;
+                   case DEVICE_TEMPERATURE_CPU:
+                       temperatures[i].type = TemperatureType::CPU;
+                       break;
+                   case DEVICE_TEMPERATURE_GPU:
+                       temperatures[i].type = TemperatureType::GPU;
+                       break;
+                   case DEVICE_TEMPERATURE_BATTERY:
+                       temperatures[i].type = TemperatureType::BATTERY;
+                       break;
+                   case DEVICE_TEMPERATURE_SKIN:
+                       temperatures[i].type = TemperatureType::SKIN;
+                       break;
+                   default:
+                       ALOGE("Unknown temperature %s type", list[i].name);;
+               }
+               temperatures[i].name = list[i].name;
+               temperatures[i].currentValue = list[i].current_value;
+               temperatures[i].throttlingThreshold = list[i].throttling_threshold;
+               temperatures[i].shutdownThreshold = list[i].shutdown_threshold;
+               temperatures[i].vrThrottlingThreshold = list[i].vr_throttling_threshold;
+           }
+       } else {
+           status.code = ThermalStatusCode::FAILURE;
+           status.debugMessage = strerror(-size);
+       }
+       delete[] list;
+    } else {
+        status.code = ThermalStatusCode::FAILURE;
+        status.debugMessage = strerror(-list_size);
+    }
+    _hidl_cb(status, temperatures);
+    return Void();
+}
+
+Return<void> Thermal::getCpuUsages(getCpuUsages_cb _hidl_cb)  {
+    ThermalStatus status;
+    hidl_vec<CpuUsage> cpuUsages;
+    status.code = ThermalStatusCode::SUCCESS;
+
+    if (!mModule || !mModule->getCpuUsages) {
+        ALOGI("getCpuUsages is not implemented in Thermal HAL");
+        _hidl_cb(status, cpuUsages);
+        return Void();
+    }
+
+    ssize_t size = mModule->getCpuUsages(mModule, nullptr);
+    if (size >= 0) {
+        cpu_usage_t *list = new cpu_usage_t[size];
+        size = mModule->getCpuUsages(mModule, list);
+        if (size >= 0) {
+            cpuUsages.resize(size);
+            for (ssize_t i = 0; i < size; ++i) {
+                cpuUsages[i].name = list[i].name;
+                cpuUsages[i].active = list[i].active;
+                cpuUsages[i].total = list[i].total;
+                cpuUsages[i].isOnline = list[i].is_online;
+            }
+        } else {
+            status.code = ThermalStatusCode::FAILURE;
+            status.debugMessage = strerror(-size);
+        }
+        delete[] list;
+    } else {
+        status.code = ThermalStatusCode::FAILURE;
+        status.debugMessage = strerror(-size);
+    }
+    _hidl_cb(status, cpuUsages);
+    return Void();
+}
+
+Return<void> Thermal::getCoolingDevices(getCoolingDevices_cb _hidl_cb)  {
+    ThermalStatus status;
+    status.code = ThermalStatusCode::SUCCESS;
+    hidl_vec<CoolingDevice> coolingDevices;
+
+    if (!mModule || !mModule->getCoolingDevices) {
+        ALOGI("getCoolingDevices is not implemented in Thermal HAL.");
+        _hidl_cb(status, coolingDevices);
+        return Void();
+    }
+
+    ssize_t list_size = mModule->getCoolingDevices(mModule, nullptr, 0);
+    if (list_size >= 0) {
+        cooling_device_t *list = new cooling_device_t[list_size];
+        ssize_t size = mModule->getCoolingDevices(mModule, list, list_size);
+        if (size >= 0) {
+            if (list_size > size) {
+                list_size = size;
+            }
+            coolingDevices.resize(list_size);
+            for (ssize_t i = 0; i < list_size; ++i) {
+                switch (list[i].type) {
+                    case FAN_RPM:
+                        coolingDevices[i].type = CoolingType::FAN_RPM;
+                        break;
+                    default:
+                        ALOGE("Unknown cooling device %s type", list[i].name);
+                }
+                coolingDevices[i].name = list[i].name;
+                coolingDevices[i].currentValue = list[i].current_value;
+            }
+
+        } else {
+            status.code = ThermalStatusCode::FAILURE;
+            status.debugMessage = strerror(-size);
+        }
+        delete[] list;
+    } else {
+        status.code = ThermalStatusCode::FAILURE;
+        status.debugMessage = strerror(-list_size);
+    }
+    _hidl_cb(status, coolingDevices);
+    return Void();
+}
+
+IThermal* HIDL_FETCH_IThermal(const char* /* name */) {
+    thermal_module_t* module;
+    status_t err = hw_get_module(THERMAL_HARDWARE_MODULE_ID,
+            const_cast<hw_module_t const**>(reinterpret_cast<hw_module_t**>(&module)));
+    if (err || !module) {
+        ALOGE("Couldn't load %s module (%s)", THERMAL_HARDWARE_MODULE_ID,
+              strerror(-err));
+    }
+
+    if (err == 0 && module->common.methods->open) {
+        struct hw_device_t* device;
+        err = module->common.methods->open(&module->common, THERMAL_HARDWARE_MODULE_ID, &device);
+        if (err) {
+            ALOGE("Couldn't open %s module (%s)", THERMAL_HARDWARE_MODULE_ID, strerror(-err));
+        } else {
+            return new Thermal(reinterpret_cast<thermal_module_t*>(device));
+        }
+    }
+    return new Thermal(module);
+}
+
+} // namespace implementation
+}  // namespace V1_0
+}  // namespace thermal
+}  // namespace hardware
+}  // namespace android
diff --git a/thermal/1.0/default/Thermal.h b/thermal/1.0/default/Thermal.h
new file mode 100644
index 0000000..8212ab9
--- /dev/null
+++ b/thermal/1.0/default/Thermal.h
@@ -0,0 +1,45 @@
+#ifndef HIDL_GENERATED_android_hardware_thermal_V1_0_Thermal_H_
+#define HIDL_GENERATED_android_hardware_thermal_V1_0_Thermal_H_
+
+#include <android/hardware/thermal/1.0/IThermal.h>
+#include <hidl/Status.h>
+#include <hardware/thermal.h>
+
+#include <hidl/MQDescriptor.h>
+
+namespace android {
+namespace hardware {
+namespace thermal {
+namespace V1_0 {
+namespace implementation {
+
+using ::android::hardware::thermal::V1_0::CoolingDevice;
+using ::android::hardware::thermal::V1_0::CpuUsage;
+using ::android::hardware::thermal::V1_0::IThermal;
+using ::android::hardware::thermal::V1_0::Temperature;
+using ::android::hardware::thermal::V1_0::ThermalStatus;
+using ::android::hardware::Return;
+using ::android::hardware::Void;
+using ::android::hardware::hidl_vec;
+using ::android::hardware::hidl_string;
+using ::android::sp;
+
+struct Thermal : public IThermal {
+    Thermal(thermal_module_t* module);
+    // Methods from ::android::hardware::thermal::V1_0::IThermal follow.
+    Return<void> getTemperatures(getTemperatures_cb _hidl_cb)  override;
+    Return<void> getCpuUsages(getCpuUsages_cb _hidl_cb)  override;
+    Return<void> getCoolingDevices(getCoolingDevices_cb _hidl_cb)  override;
+    private:
+        thermal_module_t* mModule;
+};
+
+extern "C" IThermal* HIDL_FETCH_IThermal(const char* name);
+
+}  // namespace implementation
+}  // namespace V1_0
+}  // namespace thermal
+}  // namespace hardware
+}  // namespace android
+
+#endif  // HIDL_GENERATED_android_hardware_thermal_V1_0_Thermal_H_
diff --git a/thermal/1.0/default/android.hardware.thermal@1.0-service.rc b/thermal/1.0/default/android.hardware.thermal@1.0-service.rc
new file mode 100644
index 0000000..cc7ba6a
--- /dev/null
+++ b/thermal/1.0/default/android.hardware.thermal@1.0-service.rc
@@ -0,0 +1,4 @@
+service thermal-hal-1-0 /system/bin/hw/android.hardware.thermal@1.0-service
+    class hal
+    user system
+    group system readproc
diff --git a/thermal/1.0/default/service.cpp b/thermal/1.0/default/service.cpp
new file mode 100644
index 0000000..b09b5ec
--- /dev/null
+++ b/thermal/1.0/default/service.cpp
@@ -0,0 +1,53 @@
+/*
+ * Copyright (C) 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <iostream>
+#include <unistd.h>
+
+#include <android/hardware/thermal/1.0/IThermal.h>
+
+#include <hidl/IServiceManager.h>
+#include <hwbinder/IPCThreadState.h>
+#include <hwbinder/ProcessState.h>
+#include <utils/Errors.h>
+
+#define LOG_TAG "android.hardware.thermal@1.0-service"
+#include <utils/Log.h>
+#include <utils/StrongPointer.h>
+
+using android::sp;
+
+// libhwbinder:
+using android::hardware::IPCThreadState;
+using android::hardware::ProcessState;
+
+// Generated HIDL files
+using android::hardware::thermal::V1_0::IThermal;
+
+int main() {
+    const char instance[] = "thermal";
+    sp<IThermal> service = IThermal::getService(instance, true /* getStub */);
+    if (service.get() == nullptr) {
+        ALOGE("IThermal::getService returned NULL, exiting");
+        return EXIT_FAILURE;
+    }
+    LOG_FATAL_IF(service->isRemote(), "Implementation is REMOTE!");
+    service->registerAsService(instance);
+
+    ProcessState::self()->setThreadPoolMaxThreadCount(0);
+    ProcessState::self()->startThreadPool();
+    IPCThreadState::self()->joinThreadPool();
+}
diff --git a/thermal/1.0/types.hal b/thermal/1.0/types.hal
new file mode 100644
index 0000000..b3dcc7d
--- /dev/null
+++ b/thermal/1.0/types.hal
@@ -0,0 +1,140 @@
+/*
+ * Copyright (C) 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.thermal@1.0;
+
+/** Device temperature types */
+enum TemperatureType : int32_t {
+    UNKNOWN = -1,
+    CPU = 0,
+    GPU = 1,
+    BATTERY = 2,
+    SKIN = 3,
+};
+
+enum CoolingType : int32_t {
+    /** Fan cooling device speed in RPM. */
+    FAN_RPM = 0,
+};
+
+struct Temperature {
+    /**
+     * This temperature's type.
+     */
+    TemperatureType type;
+
+    /**
+     * Name of this temperature.
+     * All temperatures of the same "type" must have a different "name",
+     * e.g., cpu0, battery.
+     */
+    string name;
+
+    /**
+     * Current temperature in Celsius. If not available set by HAL to
+     * UNKNOWN_TEMPERATURE.
+     * Current temperature can be in any units if type=UNKNOWN.
+     */
+    float currentValue;
+
+    /**
+     * Throttling temperature constant for this temperature.
+     * If not available, set by HAL to UNKNOWN_TEMPERATURE.
+     */
+    float throttlingThreshold;
+
+    /**
+     * Shutdown temperature constant for this temperature.
+     * If not available, set by HAL to UNKNOWN_TEMPERATURE.
+     */
+    float shutdownThreshold;
+
+    /**
+     * Threshold temperature above which the VR mode clockrate minimums cannot
+     * be maintained for this device.
+     * If not available, set by HAL to UNKNOWN_TEMPERATURE.
+     */
+    float vrThrottlingThreshold;
+
+};
+
+struct CoolingDevice {
+    /**
+     * This cooling device type.
+     */
+    CoolingType type;
+
+    /**
+     * Name of this cooling device.
+     * All cooling devices of the same "type" must have a different "name".
+     */
+    string name;
+
+    /**
+     * Current cooling device value. Units depend on cooling device "type".
+     */
+    float currentValue;
+
+};
+
+struct CpuUsage {
+    /**
+     * Name of this CPU.
+     * All CPUs must have a different "name".
+     */
+    string name;
+
+    /**
+     * Active time since the last boot in ms.
+     */
+    uint64_t active;
+
+    /**
+     * Total time since the last boot in ms.
+     */
+    uint64_t total;
+
+    /**
+     * Is set to true when a core is online.
+     * If the core is offline, all other members except |name| should be ignored.
+     */
+    bool isOnline;
+
+};
+
+enum ThermalStatusCode : uint32_t {
+    /** No errors. */
+    SUCCESS,
+    /** Unknown failure occured. */
+    FAILURE
+};
+
+/**
+ * Generic structure to return the status of any thermal operation.
+ */
+struct ThermalStatus {
+    ThermalStatusCode code;
+
+    /**
+     * A specific error message to provide more information.
+     * This can be used for debugging purposes only.
+     */
+    string debugMessage;
+};
+
+/**
+ * TODO(pbond): add float constant UNDEFINED_TEMPERATURE.
+ */
diff --git a/vehicle/2.0/Android.bp b/vehicle/2.0/Android.bp
new file mode 100644
index 0000000..cb30e1b
--- /dev/null
+++ b/vehicle/2.0/Android.bp
@@ -0,0 +1,54 @@
+// This file is autogenerated by hidl-gen. Do not edit manually.
+
+genrule {
+    name: "android.hardware.vehicle@2.0_genc++",
+    tool: "hidl-gen",
+    cmd: "$tool -o $genDir -Lc++ -randroid.hardware:hardware/interfaces android.hardware.vehicle@2.0",
+    srcs: [
+        "types.hal",
+        "IVehicle.hal",
+        "IVehicleCallback.hal",
+    ],
+    out: [
+        "android/hardware/vehicle/2.0/types.cpp",
+        "android/hardware/vehicle/2.0/VehicleAll.cpp",
+        "android/hardware/vehicle/2.0/VehicleCallbackAll.cpp",
+    ],
+}
+
+genrule {
+    name: "android.hardware.vehicle@2.0_genc++_headers",
+    tool: "hidl-gen",
+    cmd: "$tool -o $genDir -Lc++ -randroid.hardware:hardware/interfaces android.hardware.vehicle@2.0",
+    srcs: [
+        "types.hal",
+        "IVehicle.hal",
+        "IVehicleCallback.hal",
+    ],
+    out: [
+        "android/hardware/vehicle/2.0/types.h",
+        "android/hardware/vehicle/2.0/IVehicle.h",
+        "android/hardware/vehicle/2.0/IHwVehicle.h",
+        "android/hardware/vehicle/2.0/BnVehicle.h",
+        "android/hardware/vehicle/2.0/BpVehicle.h",
+        "android/hardware/vehicle/2.0/BsVehicle.h",
+        "android/hardware/vehicle/2.0/IVehicleCallback.h",
+        "android/hardware/vehicle/2.0/IHwVehicleCallback.h",
+        "android/hardware/vehicle/2.0/BnVehicleCallback.h",
+        "android/hardware/vehicle/2.0/BpVehicleCallback.h",
+        "android/hardware/vehicle/2.0/BsVehicleCallback.h",
+    ],
+}
+
+cc_library_shared {
+    name: "android.hardware.vehicle@2.0",
+    generated_sources: ["android.hardware.vehicle@2.0_genc++"],
+    generated_headers: ["android.hardware.vehicle@2.0_genc++_headers"],
+    export_generated_headers: ["android.hardware.vehicle@2.0_genc++_headers"],
+    shared_libs: [
+        "libhidl",
+        "libhwbinder",
+        "libutils",
+        "libcutils",
+    ],
+}
diff --git a/vehicle/2.0/Android.mk b/vehicle/2.0/Android.mk
new file mode 100644
index 0000000..be63595
--- /dev/null
+++ b/vehicle/2.0/Android.mk
@@ -0,0 +1,1708 @@
+# This file is autogenerated by hidl-gen. Do not edit manually.
+
+LOCAL_PATH := $(call my-dir)
+
+################################################################################
+
+include $(CLEAR_VARS)
+LOCAL_MODULE := android.hardware.vehicle@2.0-java
+LOCAL_MODULE_CLASS := JAVA_LIBRARIES
+
+intermediates := $(local-generated-sources-dir)
+
+HIDL := $(HOST_OUT_EXECUTABLES)/hidl-gen$(HOST_EXECUTABLE_SUFFIX)
+
+#
+# Build types.hal (StatusCode)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/StatusCode.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.StatusCode
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (SubscribeFlags)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/SubscribeFlags.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.SubscribeFlags
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (SubscribeOptions)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/SubscribeOptions.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.SubscribeOptions
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehicleApPowerBootupReason)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehicleApPowerBootupReason.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehicleApPowerBootupReason
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehicleApPowerSetState)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehicleApPowerSetState.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehicleApPowerSetState
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehicleApPowerState)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehicleApPowerState.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehicleApPowerState
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehicleApPowerStateConfigFlag)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehicleApPowerStateConfigFlag.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehicleApPowerStateConfigFlag
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehicleApPowerStateIndex)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehicleApPowerStateIndex.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehicleApPowerStateIndex
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehicleApPowerStateShutdownParam)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehicleApPowerStateShutdownParam.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehicleApPowerStateShutdownParam
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehicleArea)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehicleArea.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehicleArea
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehicleAreaConfig)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehicleAreaConfig.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehicleAreaConfig
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehicleAreaDoor)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehicleAreaDoor.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehicleAreaDoor
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehicleAreaMirror)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehicleAreaMirror.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehicleAreaMirror
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehicleAreaSeat)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehicleAreaSeat.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehicleAreaSeat
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehicleAreaWindow)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehicleAreaWindow.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehicleAreaWindow
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehicleAreaZone)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehicleAreaZone.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehicleAreaZone
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehicleAudioContextFlag)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehicleAudioContextFlag.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehicleAudioContextFlag
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehicleAudioExtFocusFlag)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehicleAudioExtFocusFlag.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehicleAudioExtFocusFlag
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehicleAudioFocusIndex)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehicleAudioFocusIndex.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehicleAudioFocusIndex
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehicleAudioFocusRequest)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehicleAudioFocusRequest.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehicleAudioFocusRequest
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehicleAudioFocusState)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehicleAudioFocusState.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehicleAudioFocusState
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehicleAudioHwVariantConfigFlag)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehicleAudioHwVariantConfigFlag.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehicleAudioHwVariantConfigFlag
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehicleAudioRoutingPolicyIndex)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehicleAudioRoutingPolicyIndex.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehicleAudioRoutingPolicyIndex
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehicleAudioStream)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehicleAudioStream.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehicleAudioStream
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehicleAudioStreamFlag)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehicleAudioStreamFlag.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehicleAudioStreamFlag
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehicleAudioVolumeCapabilityFlag)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehicleAudioVolumeCapabilityFlag.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehicleAudioVolumeCapabilityFlag
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehicleAudioVolumeIndex)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehicleAudioVolumeIndex.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehicleAudioVolumeIndex
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehicleAudioVolumeLimitIndex)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehicleAudioVolumeLimitIndex.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehicleAudioVolumeLimitIndex
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehicleAudioVolumeState)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehicleAudioVolumeState.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehicleAudioVolumeState
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehicleDisplay)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehicleDisplay.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehicleDisplay
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehicleDrivingStatus)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehicleDrivingStatus.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehicleDrivingStatus
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehicleGear)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehicleGear.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehicleGear
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehicleHvacFanDirection)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehicleHvacFanDirection.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehicleHvacFanDirection
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehicleHwKeyInputAction)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehicleHwKeyInputAction.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehicleHwKeyInputAction
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehicleInstrumentClusterType)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehicleInstrumentClusterType.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehicleInstrumentClusterType
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehiclePermissionModel)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehiclePermissionModel.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehiclePermissionModel
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehiclePropConfig)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehiclePropConfig.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehiclePropConfig
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehiclePropValue)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehiclePropValue.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehiclePropValue
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehicleProperty)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehicleProperty.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehicleProperty
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehiclePropertyAccess)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehiclePropertyAccess.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehiclePropertyAccess
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehiclePropertyChangeMode)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehiclePropertyChangeMode.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehiclePropertyChangeMode
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehiclePropertyGroup)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehiclePropertyGroup.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehiclePropertyGroup
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehiclePropertyOperation)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehiclePropertyOperation.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehiclePropertyOperation
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehiclePropertyType)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehiclePropertyType.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehiclePropertyType
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehicleRadioConstants)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehicleRadioConstants.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehicleRadioConstants
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehicleTurnSignal)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehicleTurnSignal.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehicleTurnSignal
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehicleUnit)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehicleUnit.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehicleUnit
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build IVehicle.hal
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/IVehicle.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/IVehicle.hal
+$(GEN): PRIVATE_DEPS += $(LOCAL_PATH)/IVehicleCallback.hal
+$(GEN): $(LOCAL_PATH)/IVehicleCallback.hal
+$(GEN): PRIVATE_DEPS += $(LOCAL_PATH)/types.hal
+$(GEN): $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::IVehicle
+
+$(GEN): $(LOCAL_PATH)/IVehicle.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build IVehicleCallback.hal
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/IVehicleCallback.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/IVehicleCallback.hal
+$(GEN): PRIVATE_DEPS += $(LOCAL_PATH)/types.hal
+$(GEN): $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::IVehicleCallback
+
+$(GEN): $(LOCAL_PATH)/IVehicleCallback.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+include $(BUILD_JAVA_LIBRARY)
+
+
+################################################################################
+
+include $(CLEAR_VARS)
+LOCAL_MODULE := android.hardware.vehicle@2.0-java-static
+LOCAL_MODULE_CLASS := JAVA_LIBRARIES
+
+intermediates := $(local-generated-sources-dir)
+
+HIDL := $(HOST_OUT_EXECUTABLES)/hidl-gen$(HOST_EXECUTABLE_SUFFIX)
+
+#
+# Build types.hal (StatusCode)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/StatusCode.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.StatusCode
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (SubscribeFlags)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/SubscribeFlags.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.SubscribeFlags
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (SubscribeOptions)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/SubscribeOptions.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.SubscribeOptions
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehicleApPowerBootupReason)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehicleApPowerBootupReason.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehicleApPowerBootupReason
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehicleApPowerSetState)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehicleApPowerSetState.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehicleApPowerSetState
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehicleApPowerState)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehicleApPowerState.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehicleApPowerState
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehicleApPowerStateConfigFlag)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehicleApPowerStateConfigFlag.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehicleApPowerStateConfigFlag
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehicleApPowerStateIndex)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehicleApPowerStateIndex.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehicleApPowerStateIndex
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehicleApPowerStateShutdownParam)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehicleApPowerStateShutdownParam.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehicleApPowerStateShutdownParam
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehicleArea)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehicleArea.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehicleArea
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehicleAreaConfig)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehicleAreaConfig.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehicleAreaConfig
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehicleAreaDoor)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehicleAreaDoor.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehicleAreaDoor
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehicleAreaMirror)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehicleAreaMirror.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehicleAreaMirror
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehicleAreaSeat)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehicleAreaSeat.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehicleAreaSeat
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehicleAreaWindow)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehicleAreaWindow.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehicleAreaWindow
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehicleAreaZone)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehicleAreaZone.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehicleAreaZone
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehicleAudioContextFlag)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehicleAudioContextFlag.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehicleAudioContextFlag
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehicleAudioExtFocusFlag)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehicleAudioExtFocusFlag.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehicleAudioExtFocusFlag
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehicleAudioFocusIndex)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehicleAudioFocusIndex.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehicleAudioFocusIndex
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehicleAudioFocusRequest)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehicleAudioFocusRequest.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehicleAudioFocusRequest
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehicleAudioFocusState)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehicleAudioFocusState.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehicleAudioFocusState
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehicleAudioHwVariantConfigFlag)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehicleAudioHwVariantConfigFlag.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehicleAudioHwVariantConfigFlag
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehicleAudioRoutingPolicyIndex)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehicleAudioRoutingPolicyIndex.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehicleAudioRoutingPolicyIndex
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehicleAudioStream)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehicleAudioStream.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehicleAudioStream
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehicleAudioStreamFlag)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehicleAudioStreamFlag.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehicleAudioStreamFlag
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehicleAudioVolumeCapabilityFlag)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehicleAudioVolumeCapabilityFlag.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehicleAudioVolumeCapabilityFlag
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehicleAudioVolumeIndex)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehicleAudioVolumeIndex.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehicleAudioVolumeIndex
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehicleAudioVolumeLimitIndex)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehicleAudioVolumeLimitIndex.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehicleAudioVolumeLimitIndex
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehicleAudioVolumeState)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehicleAudioVolumeState.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehicleAudioVolumeState
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehicleDisplay)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehicleDisplay.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehicleDisplay
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehicleDrivingStatus)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehicleDrivingStatus.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehicleDrivingStatus
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehicleGear)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehicleGear.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehicleGear
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehicleHvacFanDirection)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehicleHvacFanDirection.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehicleHvacFanDirection
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehicleHwKeyInputAction)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehicleHwKeyInputAction.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehicleHwKeyInputAction
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehicleInstrumentClusterType)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehicleInstrumentClusterType.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehicleInstrumentClusterType
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehiclePermissionModel)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehiclePermissionModel.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehiclePermissionModel
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehiclePropConfig)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehiclePropConfig.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehiclePropConfig
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehiclePropValue)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehiclePropValue.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehiclePropValue
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehicleProperty)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehicleProperty.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehicleProperty
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehiclePropertyAccess)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehiclePropertyAccess.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehiclePropertyAccess
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehiclePropertyChangeMode)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehiclePropertyChangeMode.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehiclePropertyChangeMode
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehiclePropertyGroup)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehiclePropertyGroup.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehiclePropertyGroup
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehiclePropertyOperation)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehiclePropertyOperation.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehiclePropertyOperation
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehiclePropertyType)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehiclePropertyType.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehiclePropertyType
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehicleRadioConstants)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehicleRadioConstants.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehicleRadioConstants
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehicleTurnSignal)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehicleTurnSignal.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehicleTurnSignal
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build types.hal (VehicleUnit)
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/VehicleUnit.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::types.VehicleUnit
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build IVehicle.hal
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/IVehicle.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/IVehicle.hal
+$(GEN): PRIVATE_DEPS += $(LOCAL_PATH)/IVehicleCallback.hal
+$(GEN): $(LOCAL_PATH)/IVehicleCallback.hal
+$(GEN): PRIVATE_DEPS += $(LOCAL_PATH)/types.hal
+$(GEN): $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::IVehicle
+
+$(GEN): $(LOCAL_PATH)/IVehicle.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build IVehicleCallback.hal
+#
+GEN := $(intermediates)/android/hardware/vehicle/2.0/IVehicleCallback.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/IVehicleCallback.hal
+$(GEN): PRIVATE_DEPS += $(LOCAL_PATH)/types.hal
+$(GEN): $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vehicle@2.0::IVehicleCallback
+
+$(GEN): $(LOCAL_PATH)/IVehicleCallback.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+include $(BUILD_STATIC_JAVA_LIBRARY)
+
+
+
+include $(call all-makefiles-under,$(LOCAL_PATH))
diff --git a/vehicle/2.0/IVehicle.hal b/vehicle/2.0/IVehicle.hal
new file mode 100644
index 0000000..0885539
--- /dev/null
+++ b/vehicle/2.0/IVehicle.hal
@@ -0,0 +1,99 @@
+/*
+ * Copyright (C) 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.vehicle@2.0;
+
+import IVehicleCallback;
+
+interface IVehicle {
+  /**
+   * Returns a list of all property configurations supported by this vehicle
+   * HAL.
+   */
+  getAllPropConfigs() generates (vec<VehiclePropConfig> propConfigs);
+
+  /*
+   * Returns a list of property configurations for given properties.
+   */
+  getPropConfigs(vec<VehicleProperty> props)
+          generates (vec<VehiclePropConfig> propConfigs);
+
+  /**
+   * Get a vehicle property value.
+   *
+   * For VehiclePropertyChangeMode::STATIC properties, this method must always
+   * return the same value always.
+   * For VehiclePropertyChangeMode::ON_CHANGE properties, it must return the
+   * latest available value.
+   *
+   * If there is no data available yet, which can happen during initial stage,
+   * this call must return immediately with an error code of
+   * StatusCode::TRY_AGAIN.
+   */
+  get(VehicleProperty propId, int32_t areaId)
+          generates (StatusCode status, VehiclePropValue propValue);
+
+  /**
+   * Set a vehicle property value.
+   *
+   * Timestamp of data must be ignored for set operation.
+   *
+   * Setting some properties require having initial state available. If initial
+   * data is not available yet this call must return StatusCode::TRY_AGAIN.
+   * For a property with separate power control this call must return
+   * StatusCode::NOT_AVAILABLE error if property is not powered on.
+   */
+  set(VehiclePropValue propValue) generates (StatusCode status);
+
+  /**
+   * Subscribes to property events.
+   *
+   * Clients must be able to subscribe to multiple properties at a time
+   * depending on data provided in options argument.
+   *
+   * @param listener This client must be called on aproperiate event.
+   * @param options List of options to subscribe. SubscribeOption contains
+   *                information such as propery Id, area Id, sample rate, etc.
+   */
+  subscribe(IVehicleCallback listener, vec<SubscribeOptions> options)
+          generates (StatusCode status);
+
+  /**
+   * Unsubscribes from property events.
+   *
+   * If this client wasn't subscribed to the given property, this method
+   * must return StatusCode::INVALID_ARGUMENT.
+   */
+  unsubscribe(VehicleProperty propId) generates (StatusCode status);
+
+  /**
+   * Print out debugging state for the vehicle hal.
+   *
+   * The text must be in ASCII encoding only.
+   *
+   * Performance requirements:
+   *
+   * The HAL must return from this call in less than 10ms. This call must avoid
+   * deadlocks, as it may be called at any point of operation. Any synchronization
+   * primitives used (such as mutex locks or semaphores) must be acquired
+   * with a timeout.
+   *
+   * TODO(pavelm): we cannot use handle here due to Java compatability, it's
+   * better to pass file descriptor and write debug data directly in vehicle HAL
+   * rather than passing back a string.
+   */
+  debugDump() generates (string s);
+};
diff --git a/vehicle/2.0/IVehicleCallback.hal b/vehicle/2.0/IVehicleCallback.hal
new file mode 100644
index 0000000..1e9034f
--- /dev/null
+++ b/vehicle/2.0/IVehicleCallback.hal
@@ -0,0 +1,56 @@
+/*
+ * Copyright (C) 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.vehicle@2.0;
+
+interface IVehicleCallback {
+
+    /*
+     * Event callback happens whenever a variable that the API user has
+     * subscribed to needs to be reported. This may be based purely on
+     * threshold and frequency (a regular subscription, see subscribe call's
+     * arguments) or when the IVehicle#set method was called and the actual
+     * change needs to be reported.
+     *
+     * These callbacks are chunked.
+     *
+     * @param values that has been updated.
+     */
+    onPropertyEvent(vec<VehiclePropValue> propValues);
+
+    /*
+     * This method gets called if the client was susbscribed to a property using
+     * SubscribeFlags::SET_CALL flag and IVehicle#set(...) method was called.
+     *
+     * These events must be delivered to subscriber immediately without any
+     * batching.
+     *
+     * @param value Value that was set by a client.
+     */
+    onPropertySet(VehiclePropValue propValue);
+
+    /*
+     * Called by HAL server when error condition has occurred.
+     *
+     * @param errorCode - any value from StatusCode enum.
+     * @parm property - a property where error has happened. If this is
+     * a generic error, this value should be VehicleProperty::INVALID.
+     * @param operation Represent the operation where the error has happened.
+     */
+    onError(StatusCode errorCode,
+            VehicleProperty propId,
+            VehiclePropertyOperation operation);
+};
diff --git a/vehicle/2.0/default/Android.mk b/vehicle/2.0/default/Android.mk
new file mode 100644
index 0000000..a30d753
--- /dev/null
+++ b/vehicle/2.0/default/Android.mk
@@ -0,0 +1,48 @@
+# Copyright (C) 2016 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+LOCAL_PATH := $(call my-dir)
+
+include $(CLEAR_VARS)
+LOCAL_MODULE := android.hardware.vehicle@2.0-impl
+# TODO(pavelm): add LOCAL_INIT_RC
+LOCAL_MODULE_RELATIVE_PATH := hw
+LOCAL_SRC_FILES := \
+    Vehicle.cpp \
+    VehicleCallback.cpp \
+
+LOCAL_SHARED_LIBRARIES := \
+    libhidl \
+    libhwbinder \
+    libutils \
+    android.hardware.vehicle@2.0 \
+
+include $(BUILD_SHARED_LIBRARY)
+
+
+include $(CLEAR_VARS)
+LOCAL_MODULE := android.hardware.vehicle@2.0-service
+LOCAL_MODULE_RELATIVE_PATH := hw
+LOCAL_SRC_FILES := \
+    VehicleService.cpp
+
+LOCAL_SHARED_LIBRARIES := \
+    liblog \
+    libbinder \
+    libhidl \
+    libhwbinder \
+    libutils \
+    android.hardware.vehicle@2.0
+
+include $(BUILD_EXECUTABLE)
diff --git a/vehicle/2.0/default/Vehicle.cpp b/vehicle/2.0/default/Vehicle.cpp
new file mode 100644
index 0000000..a4933df
--- /dev/null
+++ b/vehicle/2.0/default/Vehicle.cpp
@@ -0,0 +1,147 @@
+/*
+ * Copyright (C) 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "Vehicle.h"
+#include "VehicleUtils.h"
+
+#include <utils/SystemClock.h>
+
+namespace android {
+namespace hardware {
+namespace vehicle {
+namespace V2_0 {
+namespace implementation {
+
+const VehiclePropConfig kVehicleProperties[] = {
+    {
+        .prop = VehicleProperty::INFO_MAKE,
+        .access = VehiclePropertyAccess::READ,
+        .changeMode = VehiclePropertyChangeMode::STATIC,
+        .permissionModel = VehiclePermissionModel::OEM_ONLY,
+        .configString = init_hidl_string("Some=configuration,options=if,you=have,any=?"),
+    },
+
+    {
+        .prop = VehicleProperty::HVAC_FAN_SPEED,
+        .access = VehiclePropertyAccess::READ_WRITE,
+        .changeMode = VehiclePropertyChangeMode::ON_CHANGE,
+        .permissionModel = VehiclePermissionModel::NO_RESTRICTION,
+        .supportedAreas = static_cast<int32_t>(
+               VehicleAreaZone::ROW_1_LEFT | VehicleAreaZone::ROW_1_RIGHT),
+        .areaConfigs = init_hidl_vec({
+                VehicleAreaConfig {
+                    .areaId = enum_val(VehicleAreaZone::ROW_2_LEFT),
+                    .minInt32Value = 1,
+                    .maxInt32Value = 7},
+                VehicleAreaConfig {
+                    .areaId = enum_val(VehicleAreaZone::ROW_1_RIGHT),
+                    .minInt32Value = 1,
+                    .maxInt32Value = 5,
+                }
+        }),
+    },
+
+    {
+        .prop = VehicleProperty::INFO_FUEL_CAPACITY,
+        .access = VehiclePropertyAccess::READ,
+        .changeMode = VehiclePropertyChangeMode::ON_CHANGE,
+        .permissionModel = VehiclePermissionModel::OEM_ONLY,
+        .areaConfigs = init_hidl_vec({
+                VehicleAreaConfig {
+                    .minFloatValue = 0,
+                    .maxFloatValue = 1.0
+                }
+        })
+    }
+};
+
+const char kInfoMake[] = "Android Super Car";
+
+
+Return<void> Vehicle::getAllPropConfigs(getAllPropConfigs_cb _hidl_cb)  {
+    hidl_vec<VehiclePropConfig> configs;
+
+    configs.setToExternal(const_cast<VehiclePropConfig*>(kVehicleProperties),
+                          arraysize(kVehicleProperties));
+
+    _hidl_cb(configs);
+    return Void();
+}
+
+Return<void> Vehicle::getPropConfigs(const hidl_vec<VehicleProperty>& properties,
+                                     getAllPropConfigs_cb _hidl_cb)  {
+    // TODO(pavelm): add default implementation
+    hidl_vec<VehiclePropConfig> configs;
+    _hidl_cb(configs);
+    return Void();
+}
+
+Return<void> Vehicle::get(VehicleProperty propId, int32_t areaId, get_cb _hidl_cb)  {
+    VehiclePropValue v {
+        .prop = propId,
+        .areaId = areaId,
+        .timestamp = elapsedRealtimeNano(),
+    };
+
+    StatusCode status = StatusCode::OK;
+
+    if (propId == VehicleProperty::INFO_MAKE) {
+        v.value.stringValue.setToExternal(kInfoMake, strlen(kInfoMake));
+    } else if (propId == VehicleProperty::HVAC_FAN_SPEED) {
+        v.value.int32Values = init_hidl_vec({42});
+    } else {
+        status = StatusCode::INVALID_ARG;
+    }
+
+    _hidl_cb(status, v);
+
+    return Void();
+}
+
+Return<StatusCode> Vehicle::set(const VehiclePropValue& value)  {
+    // TODO(pavelm): add default implementation
+    return StatusCode::OK;
+}
+
+Return<StatusCode> Vehicle::subscribe(const sp<IVehicleCallback>& listener,
+                                   const hidl_vec<SubscribeOptions>& options)  {
+    // TODO(pavelm): add default implementation
+    return StatusCode::OK;
+}
+
+Return<StatusCode> Vehicle::unsubscribe(VehicleProperty propId)  {
+    // TODO(pavelm): add default implementation
+    return StatusCode::OK;
+}
+
+Return<void> Vehicle::debugDump(debugDump_cb _hidl_cb) {
+    hidl_string debug;
+    debug = "Put debug data here";
+
+    _hidl_cb(debug);
+
+    return Void();
+}
+
+IVehicle* HIDL_FETCH_IVehicle(const char* /* name */) {
+    return new Vehicle();
+}
+
+} // namespace implementation
+}  // namespace V2_0
+}  // namespace vehicle
+}  // namespace hardware
+}  // namespace android
diff --git a/vehicle/2.0/default/Vehicle.h b/vehicle/2.0/default/Vehicle.h
new file mode 100644
index 0000000..c0fe03e
--- /dev/null
+++ b/vehicle/2.0/default/Vehicle.h
@@ -0,0 +1,61 @@
+/*
+ * Copyright (C) 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef HIDL_GENERATED_android_hardware_vehicle_V2_0_Vehicle_H_
+#define HIDL_GENERATED_android_hardware_vehicle_V2_0_Vehicle_H_
+
+#include <android/hardware/vehicle/2.0/IVehicle.h>
+#include <hidl/Status.h>
+
+#include <hidl/MQDescriptor.h>
+namespace android {
+namespace hardware {
+namespace vehicle {
+namespace V2_0 {
+namespace implementation {
+
+using ::android::hardware::vehicle::V2_0::IVehicle;
+using ::android::hardware::vehicle::V2_0::IVehicleCallback;
+using ::android::hardware::vehicle::V2_0::SubscribeOptions;
+using ::android::hardware::vehicle::V2_0::VehiclePropConfig;
+using ::android::hardware::vehicle::V2_0::VehiclePropValue;
+using ::android::hardware::vehicle::V2_0::VehicleProperty;
+using ::android::hardware::Return;
+using ::android::hardware::Void;
+using ::android::hardware::hidl_vec;
+using ::android::hardware::hidl_string;
+using ::android::sp;
+
+struct Vehicle : public IVehicle {
+    // Methods from ::android::hardware::vehicle::V2_0::IVehicle follow.
+    Return<void> getAllPropConfigs(getAllPropConfigs_cb _hidl_cb)  override;
+    Return<void> getPropConfigs(const hidl_vec<VehicleProperty>& properties, getPropConfigs_cb _hidl_cb)  override;
+    Return<void> get(VehicleProperty propId, int32_t areaId, get_cb _hidl_cb)  override;
+    Return<StatusCode> set(const VehiclePropValue& value)  override;
+    Return<StatusCode> subscribe(const sp<IVehicleCallback>& listener, const hidl_vec<SubscribeOptions>& options)  override;
+    Return<StatusCode> unsubscribe(VehicleProperty propId)  override;
+    Return<void> debugDump(debugDump_cb _hidl_cb = nullptr) override;
+};
+
+extern "C" IVehicle* HIDL_FETCH_IVehicle(const char* name);
+
+}  // namespace implementation
+}  // namespace V2_0
+}  // namespace vehicle
+}  // namespace hardware
+}  // namespace android
+
+#endif  // HIDL_GENERATED_android_hardware_vehicle_V2_0_Vehicle_H_
diff --git a/vehicle/2.0/default/VehicleCallback.cpp b/vehicle/2.0/default/VehicleCallback.cpp
new file mode 100644
index 0000000..985b7dc
--- /dev/null
+++ b/vehicle/2.0/default/VehicleCallback.cpp
@@ -0,0 +1,53 @@
+/*
+ * Copyright (C) 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "VehicleCallback.h"
+
+namespace android {
+namespace hardware {
+namespace vehicle {
+namespace V2_0 {
+namespace implementation {
+
+// Methods from ::android::hardware::vehicle::V2_0::IVehicleCallback follow.
+Return<void> VehicleCallback::onPropertyEvent(const hidl_vec<VehiclePropValue>& value)  {
+    // TODO(pavelm): add default implementation
+    return Void();
+}
+
+// Methods from ::android::hardware::vehicle::V2_0::IVehicleCallback follow.
+Return<void> VehicleCallback::onPropertySet(const VehiclePropValue& value)  {
+    // TODO(pavelm): add default implementation
+    return Void();
+}
+
+Return<void> VehicleCallback::onError(StatusCode errorCode,
+                                      VehicleProperty propId,
+                                      VehiclePropertyOperation operation)  {
+    // TODO(pavelm): add default implementation
+    return Void();
+}
+
+
+IVehicleCallback* HIDL_FETCH_IVehicleCallback(const char* /* name */) {
+    return new VehicleCallback();
+}
+
+} // namespace implementation
+}  // namespace V2_0
+}  // namespace vehicle
+}  // namespace hardware
+}  // namespace android
diff --git a/vehicle/2.0/default/VehicleCallback.h b/vehicle/2.0/default/VehicleCallback.h
new file mode 100644
index 0000000..d037c94
--- /dev/null
+++ b/vehicle/2.0/default/VehicleCallback.h
@@ -0,0 +1,56 @@
+/*
+ * Copyright (C) 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef HIDL_GENERATED_android_hardware_vehicle_V2_0_VehicleCallback_H_
+#define HIDL_GENERATED_android_hardware_vehicle_V2_0_VehicleCallback_H_
+
+#include <android/hardware/vehicle/2.0/IVehicleCallback.h>
+#include <hidl/Status.h>
+
+#include <hidl/MQDescriptor.h>
+namespace android {
+namespace hardware {
+namespace vehicle {
+namespace V2_0 {
+namespace implementation {
+
+using ::android::hardware::vehicle::V2_0::IVehicleCallback;
+using ::android::hardware::vehicle::V2_0::VehiclePropValue;
+using ::android::hardware::vehicle::V2_0::VehicleProperty;
+using ::android::hardware::vehicle::V2_0::VehiclePropertyOperation;
+using ::android::hardware::Return;
+using ::android::hardware::Void;
+using ::android::hardware::hidl_vec;
+using ::android::hardware::hidl_string;
+using ::android::sp;
+
+struct VehicleCallback : public IVehicleCallback {
+    // Methods from ::android::hardware::vehicle::V2_0::IVehicleCallback follow.
+    Return<void> onPropertyEvent(const hidl_vec<VehiclePropValue>& values)  override;
+    Return<void> onPropertySet(const VehiclePropValue& value)  override;
+    Return<void> onError(StatusCode errorCode, VehicleProperty propId, VehiclePropertyOperation operation)  override;
+
+};
+
+extern "C" IVehicleCallback* HIDL_FETCH_IVehicleCallback(const char* name);
+
+}  // namespace implementation
+}  // namespace V2_0
+}  // namespace vehicle
+}  // namespace hardware
+}  // namespace android
+
+#endif  // HIDL_GENERATED_android_hardware_vehicle_V2_0_VehicleCallback_H_
diff --git a/vehicle/2.0/default/VehicleService.cpp b/vehicle/2.0/default/VehicleService.cpp
new file mode 100644
index 0000000..b685977
--- /dev/null
+++ b/vehicle/2.0/default/VehicleService.cpp
@@ -0,0 +1,46 @@
+/*
+ * Copyright (C) 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#define LOG_TAG "android.hardware.vehicle@2.0-service"
+#include <utils/Log.h>
+
+#include <iostream>
+
+#include <hwbinder/IPCThreadState.h>
+
+#include <android/hardware/vehicle/2.0/IVehicle.h>
+
+using namespace android;
+using namespace android::hardware;
+using namespace android::hardware::vehicle::V2_0;
+
+int main(int /* argc */, char* /* argv */ []) {
+    ALOGI("Service is starting");
+    android::sp<IVehicle> service = IVehicle::getService("Vehicle");
+    if (service.get() == NULL) {
+        ALOGE("IVehicle::getService returned NULL, exiting");
+        return 1;
+    }
+
+    ALOGI("Registering as service");
+    // will register the -impl as a binderized service in this process
+    service->registerAsService("Vehicle");
+
+    ALOGI("Ready");
+    ProcessState::self()->setThreadPoolMaxThreadCount(0);
+    ProcessState::self()->startThreadPool();
+    IPCThreadState::self()->joinThreadPool();
+}
diff --git a/vehicle/2.0/default/VehicleUtils.h b/vehicle/2.0/default/VehicleUtils.h
new file mode 100644
index 0000000..78e34e5
--- /dev/null
+++ b/vehicle/2.0/default/VehicleUtils.h
@@ -0,0 +1,90 @@
+/*
+ * Copyright (C) 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef android_hardware_vehicle_V2_0_VehicleUtils_H_
+#define android_hardware_vehicle_V2_0_VehicleUtils_H_
+
+#include <hidl/HidlSupport.h>
+#include <android/hardware/vehicle/2.0/types.h>
+
+namespace android {
+namespace hardware {
+namespace vehicle {
+namespace V2_0 {
+
+hidl_string init_hidl_string(const char *cstr) {
+    hidl_string hidlString;
+    hidlString = cstr;
+    return hidlString;
+}
+
+template <typename T>
+hidl_vec<T> init_hidl_vec(std::initializer_list<T> values) {
+    hidl_vec<T> vector;
+    vector.resize(values.size());
+    size_t i = 0;
+    for (auto& c : values) {
+        vector[i++] = c;
+    }
+    return vector;
+}
+
+// OR operator for class enums. The return type will be enum's underline type.
+template <typename ENUM>
+typename std::underlying_type<ENUM>::type operator |(ENUM v1, ENUM v2) {
+    return static_cast<typename std::underlying_type<ENUM>::type>(v1)
+           | static_cast<typename std::underlying_type<ENUM>::type>(v2);
+}
+
+// AND operator for class enums. The return type will be enum's underline type.
+template <typename ENUM>
+typename std::underlying_type<ENUM>::type operator &(ENUM v1, ENUM v2) {
+    return static_cast<typename std::underlying_type<ENUM>::type>(v1)
+           | static_cast<typename std::underlying_type<ENUM>::type>(v2);
+}
+
+// Returns underlying (integer) value for given enum.
+template <typename ENUM>
+typename std::underlying_type<ENUM>::type enum_val(ENUM const value)
+{
+    return static_cast<typename std::underlying_type<ENUM>::type>(value);
+}
+
+VehiclePropertyType getPropType(VehicleProperty prop) {
+    return static_cast<VehiclePropertyType>(
+        static_cast<int32_t>(prop) & static_cast<int32_t>(VehiclePropertyType::MASK));
+}
+
+VehiclePropertyGroup getPropGroup(VehicleProperty prop) {
+    return static_cast<VehiclePropertyGroup>(
+        static_cast<int32_t>(prop) & static_cast<int32_t>(VehiclePropertyGroup::MASK));
+}
+
+bool checkPropType(VehicleProperty prop, VehiclePropertyType type) {
+    return getPropType(prop) == type;
+}
+
+bool isSystemProperty(VehicleProperty prop) {
+    return VehiclePropertyGroup::SYSTEM == getPropGroup(prop);
+}
+
+
+}  // namespace V2_0
+}  // namespace vehicle
+}  // namespace hardware
+}  // namespace android
+
+#endif android_hardware_vehicle_V2_0_VehicleUtils_H_
diff --git a/vehicle/2.0/types.hal b/vehicle/2.0/types.hal
new file mode 100644
index 0000000..03c1021
--- /dev/null
+++ b/vehicle/2.0/types.hal
@@ -0,0 +1,2394 @@
+/*
+ * Copyright (C) 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.vehicle@2.0;
+
+/*
+ * Enumerates supported data types for VehicleProperty.
+ *
+ * This is a bitwise flag that supposed to be used in VehicleProperty enum.
+ */
+enum VehiclePropertyType : int32_t {
+    STRING         = 0x00100000,
+    BOOLEAN        = 0x00200000,
+    INT32          = 0x00400000,
+    INT32_VEC      = 0x00410000,
+    INT64          = 0x00500000,
+    FLOAT          = 0x00600000,
+    FLOAT_VEC      = 0x00610000,
+    BYTES          = 0x00700000,
+
+    MASK           = 0x00ff0000
+};
+
+/*
+ * Some properties may be associated with particular vehicle areas. For
+ * example, VehicleProperty:DOOR_LOCK property must be associated with
+ * particular door, thus this property must be marked with
+ * VehicleArea:DOOR flag.
+ *
+ * Other properties may not be associated with particular vehicle area,
+ * these kind of properties must have VehicleArea:GLOBAL flag.
+ *
+ * This is a bitwise flag that supposed to be used in VehicleProperty enum.
+ */
+enum VehicleArea : int32_t {
+      GLOBAL       = 0x01000000,
+      ZONE         = 0x02000000,
+      WINDOW       = 0x03000000,
+      MIRROR       = 0x04000000,
+      SEAT         = 0x05000000,
+      DOOR         = 0x06000000,
+
+      MASK         = 0x0f000000,
+};
+
+/*
+ * Enumerates property groups.
+ *
+ * This is a bitwise flag that supposed to be used in VehicleProperty enum.
+ */
+enum VehiclePropertyGroup : int32_t {
+    /*
+     * Properties declared in AOSP must have this flag.
+     */
+    SYSTEM         = 0x10000000,
+
+    /*
+     * Properties declared by vendors must have this flag.
+     */
+    VENDOR         = 0x20000000,
+
+    MASK           = 0xf0000000,
+};
+
+/*
+ * Declares all vehicle properties. VehicleProperty has a bitwise structure.
+ * Each property must have:
+ *   - an unique id from range 0x0100 - 0xffff
+ *   - associated data type using VehiclePropertyType
+ *   - property group (VehiclePropertyGroup)
+ *   - vehicle area (VehicleArea)
+ *
+ * Vendors are allowed to extend this enum with their own properties. In this
+ * case they must use VehiclePropertyGroup:VENDOR flag when property is
+ * declared.
+ */
+enum VehicleProperty: int32_t {
+
+    /* Undefined property. */
+    INVALID = 0x00000000,
+
+    /*
+     * VIN of vehicle
+     *
+     * @change_mode VehiclePropertyChangeMode:STATIC
+     * @access VehiclePropertyAccess:READ
+     */
+    INFO_VIN= (
+        0x0100
+        | VehiclePropertyGroup:SYSTEM
+        | VehiclePropertyType:STRING
+        | VehicleArea:GLOBAL),
+
+    /*
+     * Maker name of vehicle
+     *
+     * @change_mode VehiclePropertyChangeMode:STATIC
+     * @access VehiclePropertyAccess:READ
+     */
+    INFO_MAKE = (
+        0x0101
+        | VehiclePropertyGroup:SYSTEM
+        | VehiclePropertyType:STRING
+        | VehicleArea:GLOBAL),
+
+    /*
+     * Model of vehicle
+     *
+     * @change_mode VehiclePropertyChangeMode:STATIC
+     * @access VehiclePropertyAccess:READ
+     */
+    INFO_MODEL = (
+        0x0102
+        | VehiclePropertyGroup:SYSTEM
+        | VehiclePropertyType:STRING
+        | VehicleArea:GLOBAL),
+
+    /*
+     * Model year of vehicle.
+     *
+     * @change_mode VehiclePropertyChangeMode:STATIC
+     * @access VehiclePropertyAccess:READ
+     * @unit VehicleUnit:YEAR
+     */
+    INFO_MODEL_YEAR = (
+        0x0103
+        | VehiclePropertyGroup:SYSTEM
+        | VehiclePropertyType:INT32
+        | VehicleArea:GLOBAL),
+
+    /*
+     * Fuel capacity of the vehicle
+     *
+     * @change_mode VehiclePropertyChangeMode:STATIC
+     * @access VehiclePropertyAccess:READ
+     * @unit VehicleUnit:MILLILITER
+     */
+    INFO_FUEL_CAPACITY = (
+        0x0104
+        | VehiclePropertyGroup:SYSTEM
+        | VehiclePropertyType:FLOAT
+        | VehicleArea:GLOBAL),
+
+    /*
+     * Current odometer value of the vehicle
+     *
+     * @change_mode VehiclePropertyChangeMode:ON_CHANGE | VehiclePropertyChangeMode:CONTINUOUS
+     * @access VehiclePropertyAccess:READ
+     * @unit VehicleUnit:KILOMETER
+     */
+    PERF_ODOMETER = (
+        0x0204
+        | VehiclePropertyGroup:SYSTEM
+        | VehiclePropertyType:FLOAT
+        | VehicleArea:GLOBAL),
+
+    /*
+     * Speed of the vehicle
+     *
+     * @change_mode VehiclePropertyChangeMode:ON_CHANGE|VehiclePropertyChangeMode:CONTINUOUS
+     * @access VehiclePropertyAccess:READ
+     * @unit VehicleUnit:METER_PER_SEC
+     */
+    PERF_VEHICLE_SPEED = (
+        0x0207
+        | VehiclePropertyGroup:SYSTEM
+        | VehiclePropertyType:FLOAT
+        | VehicleArea:GLOBAL),
+
+    /*
+     * Temperature of engine coolant
+     *
+     * @change_mode VehiclePropertyChangeMode:ON_CHANGE|VehiclePropertyChangeMode:CONTINUOUS
+     * @access VehiclePropertyAccess:READ
+     * @unit VehicleUnit:CELCIUS
+     */
+    ENGINE_COOLANT_TEMP = (
+        0x0301
+        | VehiclePropertyGroup:SYSTEM
+        | VehiclePropertyType:FLOAT
+        | VehicleArea:GLOBAL),
+
+    /*
+     * Temperature of engine oil
+     *
+     * @change_mode VehiclePropertyChangeMode:ON_CHANGE|VehiclePropertyChangeMode:CONTINUOUS
+     * @access VehiclePropertyAccess:READ
+     * @unit VehicleUnit:CELCIUS
+     */
+    ENGINE_OIL_TEMP = (
+        0x0304
+        | VehiclePropertyGroup:SYSTEM
+        | VehiclePropertyType:FLOAT
+        | VehicleArea:GLOBAL),
+
+    /*
+     * Engine rpm
+     *
+     * @change_mode VehiclePropertyChangeMode:ON_CHANGE|VehiclePropertyChangeMode:CONTINUOUS
+     * @access VehiclePropertyAccess:READ
+     * @unit VehicleUnit:RPM
+     */
+    ENGINE_RPM = (
+        0x0305
+        | VehiclePropertyGroup:SYSTEM
+        | VehiclePropertyType:FLOAT
+        | VehicleArea:GLOBAL),
+
+    /*
+     * Currently selected gear
+     *
+     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
+     * @access VehiclePropertyAccess:READ
+     * @data_enum VehicleGear
+     */
+    GEAR_SELECTION = (
+        0x0400
+        | VehiclePropertyGroup:SYSTEM
+        | VehiclePropertyType:INT32
+        | VehicleArea:GLOBAL),
+
+    /*
+     * Current gear. In non-manual case, selected gear does not necessarily
+     * match the current gear.
+     *
+     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
+     * @access VehiclePropertyAccess:READ
+     * @data_enum VehicleGear
+     */
+    CURRENT_GEAR = (
+        0x0401
+        | VehiclePropertyGroup:SYSTEM
+        | VehiclePropertyType:INT32
+        | VehicleArea:GLOBAL),
+
+    /*
+     * Parking brake state.
+     *
+     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
+     * @access VehiclePropertyAccess:READ
+     */
+    PARKING_BRAKE_ON = (
+        0x0402
+        | VehiclePropertyGroup:SYSTEM
+        | VehiclePropertyType:BOOLEAN
+        | VehicleArea:GLOBAL),
+
+    /*
+     * Driving status policy.
+     *
+     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
+     * @access VehiclePropertyAccess:READ
+     * @data_enum VehicleDrivingStatus
+     */
+    DRIVING_STATUS = (
+        0x0404
+        | VehiclePropertyGroup:SYSTEM
+        | VehiclePropertyType:INT32
+        | VehicleArea:GLOBAL),
+
+    /*
+     * Warning for fuel low level.
+     *
+     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
+     * @access VehiclePropertyAccess:READ
+     */
+    FUEL_LEVEL_LOW = (
+        0x0405
+        | VehiclePropertyGroup:SYSTEM
+        | VehiclePropertyType:BOOLEAN
+        | VehicleArea:GLOBAL),
+
+    /*
+     * Night mode or not.
+     *
+     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
+     * @access VehiclePropertyAccess:READ
+     */
+    NIGHT_MODE = (
+        0x0407
+        | VehiclePropertyGroup:SYSTEM
+        | VehiclePropertyType:BOOLEAN
+        | VehicleArea:GLOBAL),
+
+    /*
+     * Fan speed setting
+     *
+     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
+     * @access VehiclePropertyAccess:READ_WRITE
+     * @data_enum TODO
+     * @allow_out_of_range_value : OFF
+     */
+    HVAC_FAN_SPEED = (
+        0x0500
+        | VehiclePropertyGroup:SYSTEM
+        | VehiclePropertyType:INT32
+        | VehicleArea:ZONE),
+
+    /*
+     * Fan direction setting
+     *
+     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
+     * @access VehiclePropertyAccess:READ_WRITE
+     * @data_enum TODO
+     * @allow_out_of_range_value : OFF
+     */
+    HVAC_FAN_DIRECTION = (
+        0x0501
+        | VehiclePropertyGroup:SYSTEM
+        | VehiclePropertyType:INT32
+        | VehicleArea:ZONE),
+
+    /*
+     * HVAC current temperature.
+     *
+     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
+     * @access VehiclePropertyAccess:READ_WRITE
+     */
+    HVAC_TEMPERATURE_CURRENT = (
+        0x0502
+        | VehiclePropertyGroup:SYSTEM
+        | VehiclePropertyType:FLOAT
+        | VehicleArea:ZONE),
+
+    /*
+     * HVAC, target temperature set.
+     *
+     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
+     * @access VehiclePropertyAccess:READ_WRITE
+     * @allow_out_of_range_value : MIN / MAX / OFF
+     */
+    HVAC_TEMPERATURE_SET = (
+        0x0503
+        | VehiclePropertyGroup:SYSTEM
+        | VehiclePropertyType:FLOAT
+        | VehicleArea:ZONE),
+
+    /*
+     * On/off defrost
+     *
+     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
+     * @access VehiclePropertyAccess:READ_WRITE
+     */
+    HVAC_DEFROSTER = (
+        0x0504
+        | VehiclePropertyGroup:SYSTEM
+        | VehiclePropertyType:BOOLEAN
+        | VehicleArea:WINDOW),
+
+    /*
+     * On/off AC
+     *
+     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
+     * @access VehiclePropertyAccess:READ_WRITE
+     * @config_flags Supported zones
+     */
+    HVAC_AC_ON = (
+        0x0505
+        | VehiclePropertyGroup:SYSTEM
+        | VehiclePropertyType:BOOLEAN
+        | VehicleArea:ZONE),
+
+    /*
+     * On/off max AC
+     *
+     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
+     * @access VehiclePropertyAccess:READ_WRITE
+     */
+    HVAC_MAX_AC_ON = (
+        0x0506
+        | VehiclePropertyGroup:SYSTEM
+        | VehiclePropertyType:BOOLEAN
+        | VehicleArea:ZONE),
+
+    /*
+     * On/off max defrost
+     *
+     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
+     * @access VehiclePropertyAccess:READ_WRITE
+     */
+    HVAC_MAX_DEFROST_ON = (
+        0x0507
+        | VehiclePropertyGroup:SYSTEM
+        | VehiclePropertyType:BOOLEAN
+        | VehicleArea:ZONE),
+
+    /*
+     * On/off re-circulation
+     *
+     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
+     * @access VehiclePropertyAccess:READ_WRITE
+     */
+    HVAC_RECIRC_ON = (
+        0x0508
+        | VehiclePropertyGroup:SYSTEM
+        | VehiclePropertyType:BOOLEAN
+        | VehicleArea:ZONE),
+
+    /*
+     * On/off dual. This must be defined per each row.
+     *
+     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
+     * @access VehiclePropertyAccess:READ_WRITE
+     */
+    HVAC_DUAL_ON = (
+        0x0509
+        | VehiclePropertyGroup:SYSTEM
+        | VehiclePropertyType:BOOLEAN
+        | VehicleArea:ZONE),
+
+    /*
+     * On/off automatic mode
+     *
+     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
+     * @access VehiclePropertyAccess:READ_WRITE
+     */
+    HVAC_AUTO_ON = (
+        0x050A
+        | VehiclePropertyGroup:SYSTEM
+        | VehiclePropertyType:BOOLEAN
+        | VehicleArea:ZONE),
+
+    /*
+     * Seat temperature
+     *
+     * Negative values indicate cooling.
+     * 0 indicates off.
+     * Positive values indicate heating.
+     *
+     * Some vehicles may have multiple levels of heating and cooling. The
+     * min/max range defines the allowable range and number of steps in each
+     * direction.
+     *
+     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
+     * @access VehiclePropertyAccess:WRITE
+     */
+    HVAC_SEAT_TEMPERATURE = (
+        0x050B
+        | VehiclePropertyGroup:SYSTEM
+        | VehiclePropertyType:INT32
+        | VehicleArea:SEAT),
+
+    /*
+     * Represents power state for HVAC. Some HVAC properties must require
+     * matching power to be turned on to get out of OFF state. For non-zoned
+     * HVAC properties, VEHICLE_ALL_ZONE corresponds to global power state.
+     *
+     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
+     * @access VehiclePropertyAccess:READ_WRITE
+     * @config_string list of HVAC properties whose power is controlled by this
+     *                property. Format is hexa-decimal number (0x...) separated
+     *                by comma like "0x500,0x503". All zones defined in these
+     *                affected properties must be available in the property.
+     */
+    HVAC_POWER_ON = (
+        0x0510
+        | VehiclePropertyGroup:SYSTEM
+        | VehiclePropertyType:BOOLEAN
+        | VehicleArea:ZONE),
+
+    /*
+     * Outside temperature
+     *
+     * @change_mode VehiclePropertyChangeMode:ON_CHANGE|VehiclePropertyChangeMode:CONTINUOUS
+     * @access VehiclePropertyAccess:READ
+     * @unit VehicleUnit:CELCIUS
+     */
+    ENV_OUTSIDE_TEMPERATURE = (
+        0x0703
+        | VehiclePropertyGroup:SYSTEM
+        | VehiclePropertyType:FLOAT
+        | VehicleArea:GLOBAL),
+
+    /*
+     * Cabin temperature
+     *
+     * @change_mode VehiclePropertyChangeMode:ON_CHANGE|VehiclePropertyChangeMode:CONTINUOUS
+     * @access VehiclePropertyAccess:READ
+     * @unit VehicleUnit:CELCIUS
+     */
+    ENV_CABIN_TEMPERATURE = (
+        0x0704
+        | VehiclePropertyGroup:SYSTEM
+        | VehiclePropertyType:FLOAT
+        | VehicleArea:GLOBAL),
+
+    /*
+     * Radio presets stored on the Car radio module. The data type used is int32
+     * array with the following fields:
+     * <ul>
+     *    <li> int32Values[0]: Preset number </li>
+     *    <li> int32Values[1]: Band type (see #RADIO_BAND_FM in
+     *    system/core/include/system/radio.h).
+     *    <li> int32Values[2]: Channel number </li>
+     *    <li> int32Values[3]: Sub channel number </li>
+     * </ul>
+     *
+     * NOTE: When getting a current preset config ONLY set preset number (i.e.
+     * int32Values[0]). For setting a preset other fields are required.
+     *
+     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
+     * @access VehiclePropertyAccess:READ_WRITE
+     * @config_flags Number of presets supported
+     */
+    RADIO_PRESET = (
+        0x801
+        | VehiclePropertyGroup:SYSTEM
+        | VehiclePropertyType:INT32_VEC
+        | VehicleArea:GLOBAL),
+
+    /*
+     * Represents audio focus state of Android side. Note that car's audio
+     * module must own audio focus and grant audio focus to Android side when
+     * requested by Android side. The focus has both per stream characteristics
+     * and global characteristics.
+     *
+     * Focus request (get of this property) must take the following form:
+     *   int32Values[0]: VehicleAudioFocusRequest type
+     *   int32Values[1]: bit flags of streams requested by this focus request.
+     *                   There can be up to 32 streams.
+     *   int32Values[2]: External focus state flags. For request, only flag like
+     *                   VehicleAudioExtFocusFlag#PLAY_ONLY_FLAG or
+     *                   VehicleAudioExtFocusFlag#MUTE_MEDIA_FLAG can be
+     *                   used.
+     *                   VehicleAudioExtFocusFlag#PLAY_ONLY_FLAG is for case
+     *                   like radio where android side app still needs to hold
+     *                   focus but playback is done outside Android.
+     *                   VehicleAudioExtFocusFlag#MUTE_MEDIA_FLAG is for
+     *                   muting media channel including radio.
+     *                   VehicleAudioExtFocusFlag#PLAY_ONLY_FLAG can be set
+     *                   even if android side releases focus (request type
+     *                   REQUEST_RELEASE). In that case, audio module must
+     *                   maintain mute state until user's explicit action to
+     *                   play some media.
+     *   int32Values[3]: Currently active audio contexts. Use combination of
+     *                   flags from VehicleAudioContextFlag.
+     *                   This can be used as a hint to adjust audio policy or
+     *                   other policy decision.
+     *                   Note that there can be multiple context active at the
+     *                   same time. And android can send the same focus request
+     *                   type gain due to change in audio contexts.
+     * Note that each focus request can request multiple streams that is
+     * expected to be used for the current request. But focus request itself
+     * is global behavior as GAIN or GAIN_TRANSIENT expects all sounds played
+     * by car's audio module to stop. Note that stream already allocated to
+     * android before this focus request must not be affected by focus
+     * request.
+     *
+     * Focus response (set and subscription callback for this property) must
+     * take the following form:
+     *   int32Values[0]: VehicleAudioFocusState type
+     *   int32Values[1]: bit flags of streams allowed.
+     *   int32Values[2]: External focus state: bit flags of currently active
+     *                   audio focus in car side (outside Android). Active
+     *                   audio focus does not necessarily mean currently
+     *                   playing, but represents the state of having focus or
+     *                   waiting for focus (pause state).
+     *                   One or combination of flags from
+     *                   VehicleAudioExtFocusFlag.
+     *                   0 means no active audio focus holder outside Android.
+     *                   The state must have following values for each
+     *                   VehicleAudioFocusState:
+     *                   GAIN: 0 or VehicleAudioExtFocusFlag#PLAY_ONLY_FLAG
+     *                       when radio is active in Android side.
+     *                   GAIN_TRANSIENT: 0. Can be
+     *                       VehicleAudioExtFocusFlag#PERMANENT_FLAG or
+     *                       VehicleAudioExtFocusFlag#TRANSIENT_FLAG if android
+     *                       side has requested
+     *                       REQUEST_GAIN_TRANSIENT_MAY_DUCK and car side is
+     *                       ducking.
+     *                   LOSS: 0 when no focus is audio is active in car side.
+     *                       VehicleAudioExtFocusFlag#PERMANENT_FLAG when car
+     *                       side is playing something permanent.
+     *                   LOSS_TRANSIENT: always must be
+     *                       VehicleAudioExtFocusFlag#PERMANENT_FLAG
+     *   int32Values[3]: context requested by android side when responding to
+     *                   focus request. When car side is taking focus away,
+     *                   this must be zero.
+     *
+     * A focus response must be sent per each focus request even if there is
+     * no change in focus state. This can happen in case like focus request
+     * only involving context change where android side still needs matching
+     * focus response to confirm that audio module has made necessary changes.
+     *
+     * If car does not support AUDIO_FOCUS, focus is assumed to be granted
+     * always.
+     *
+     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
+     * @access VehiclePropertyAccess:READ_WRITE
+     */
+    AUDIO_FOCUS = (
+        0x0900
+        | VehiclePropertyGroup:SYSTEM
+        | VehiclePropertyType:INT32_VEC
+        | VehicleArea:GLOBAL),
+
+    /*
+     * Property to control audio volume of each audio context.
+     *
+     * VehiclePropConfig
+     *   configArray[0] : bit flags of all supported audio contexts. If this
+     *                     is 0, audio volume is controlled per physical stream
+     *   configArray[1] : flags defined in VehicleAudioVolumeCapabilityFlag to
+     *                     represent audio module's capability.
+     *
+     * Data type looks like:
+     *   int32Values[0] : stream context as defined in VehicleAudioContextFlag.
+     *                    If only physical stream is supported
+     *                    (configArray[0] == 0), this must represent physical
+                          stream number.
+     *   int32Values[1] : volume level, valid range is 0 to int32MaxValue
+     *                    defined in config.
+     *                    0 must be mute state. int32MinValue config must be
+     *                    always 0.
+     *   int32Values[2] : One of VehicleAudioVolumeState.
+     *
+     * This property requires per stream based get. HAL implementation must
+     * check stream number in get call to return the right volume.
+     *
+     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
+     * @access VehiclePropertyAccess:READ_WRITE
+     * @config_flags all audio contexts supported.
+     */
+    AUDIO_VOLUME = (
+        0x0901
+        | VehiclePropertyGroup:SYSTEM
+        | VehiclePropertyType:INT32_VEC
+        | VehicleArea:GLOBAL),
+
+    /*
+     * Property for handling volume limit set by user. This limits maximum
+     * volume that can be set per each context or physical stream.
+     *
+     * VehiclePropConfig
+     *   configArray[0] : bit flags of all supported audio contexts. If this is
+     *                    0, audio volume is controlled per physical stream.
+     *   configArray[1] : flags defined in VehicleAudioVolumeCapabilityFlag
+     *                    to represent audio module's capability.
+     *
+     * Data type looks like:
+     *   int32Values[0] : stream context as defined in VehicleAudioFocusFlag.
+     *                    If only physical stream is supported
+     *                    (configArray[0] == 0), this must represent physical
+     *                    stream number.
+     *   int32Values[1] : maximum volume set to the stream. If there is no
+     *                    restriction, this value must be  bigger than
+     *                    AUDIO_VOLUME's max value.
+     *
+     * If car does not support this feature, this property must not be
+     * populated by HAL.
+     * This property requires per stream based get. HAL implementation must
+     * check stream number in get call to return the right volume.
+     *
+     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
+     * @access VehiclePropertyAccess:READ_WRITE
+     * @config_flags all audio contexts supported.
+     */
+    AUDIO_VOLUME_LIMIT = (
+        0x0902
+        | VehiclePropertyGroup:SYSTEM
+        | VehiclePropertyType:INT32_VEC
+        | VehicleArea:GLOBAL),
+
+    /*
+     * Property to share audio routing policy of android side. This property is
+     * set at the beginning to pass audio policy in android side down to
+     * vehicle HAL and car audio module.
+     * This can be used as a hint to adjust audio policy or other policy
+     * decision.
+     *
+     *   int32Values[0] : audio stream where the audio for the application
+     *                    context must be routed by default. Note that this is
+     *                    the default setting from system, but each app may
+     *                    still use different audio stream for whatever reason.
+     *   int32Values[1] : All audio contexts that must be sent through the
+     *                     physical stream. Flag is defined in
+     *                     VehicleAudioFocusFlag.
+
+     * Setting of this property must be done for all available physical streams
+     * based on audio H/W variant information acquired from AUDIO_HW_VARIANT
+     * property.
+     *
+     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
+     * @access VehiclePropertyAccess:WRITE
+     */
+    AUDIO_ROUTING_POLICY = (
+        0x0903
+        | VehiclePropertyGroup:SYSTEM
+        | VehiclePropertyType:INT32_VEC
+        | VehicleArea:GLOBAL),
+
+    /*
+     * Property to return audio H/W variant type used in this car. This allows
+     * android side to support different audio policy based on H/W variant used.
+     * Note that other components like CarService may need overlay update to
+     * support additional variants. If this property does not
+     * exist, default audio policy must be used.
+     *
+     * @change_mode VehiclePropertyChangeMode:STATIC
+     * @access VehiclePropertyAccess:READ
+     * @config_flags Additional info on audio H/W. Must use
+     *               VehicleAudioHwVariantConfigFlag for this.
+     */
+    AUDIO_HW_VARIANT = (
+        0x0904
+        | VehiclePropertyGroup:SYSTEM
+        | VehiclePropertyType:INT32
+        | VehicleArea:GLOBAL),
+
+    /*
+     * Property to pass hint on external audio routing. When android side
+     * request focus with VehicleAudioExtFocusflag, this
+     * property must be set before setting AUDIO_FOCUS property as a hint for
+     * external audio source routing.
+     * Note that setting this property alone must not trigger any change.
+     * Audio routing must be changed only when AUDIO_FOCUS property is set.
+     * Note that this property allows passing custom value as long as it is
+     * defined in VehiclePropConfig#configString. This allows supporting
+     * non-standard routing options through this property.
+     * It is recommended to use separate name space for custom property to
+     * prevent conflict in future android releases.
+     * Enabling each external routing option is done by enabling each bit flag
+     * for the routing.
+     * This property can support up to 128 external routings.
+     * To give full flexibility, there is no standard definition for each bit
+     * flag and assigning each big flag to specific routing type is decided by
+     * VehiclePropConfig#configString.  VehiclePropConfig#configString has
+     * format of each entry separated by ',' and each entry has format of
+     * bitFlagPositon:typeString[:physicalStreamNumber].
+     *  bitFlagPosition: represents which big flag will be set to enable this
+     *  routing. 0 means
+     *    LSB in int32Values[0]. 31 will be MSB in int32Values[0]. 127 will MSB
+     *    in int32Values[3].
+     *  typeString: string representation of external routing. Some types are
+     *    already defined in AUDIO_EXT_ROUTING_SOURCE_* and use them first
+     *    before adding something custom. Applications will find each routing
+     *    using this string.
+     *  physicalStreamNumber: This part is optional and represents physical
+     *    stream to android which will be disabled when this routing is enabled.
+     *    If not specified, this routing must not affect physical streams to
+     *    android.
+     * As an example, let's assume a system with two physical streams, 0 for
+     * media and 1 for nav guidance. And let's assume external routing option
+     * of am fm radio, external navigation guidance, satellite radio, and one
+     * custom. Let's assume that radio and satellite replaces physical stream 0
+     * and external navigation replaces physical stream 1. And bit flag will be
+     * assigned in the order listed above. This configuration will look like
+     * this in config_string:
+     *  "0:RADIO_AM_FM:0,1:EXT_NAV_GUIDANCE:1,2:RADIO_SATELLITE:0,3:com.test.SOMETHING_CUSTOM"
+     * When android requests RADIO_AM_FM, int32Values[0] will be set to 0x1.
+     * When android requests RADIO_SATELLITE + EXT_NAV_GUIDANCE, int32Values[0]
+     * will be set to 0x2|0x4.
+     *
+     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
+     * @access VehiclePropertyAccess:WRITE|VehiclePropertyAccess:READ_WRITE
+     * @config_string List of all avaiable external source in the system.
+     */
+    AUDIO_EXT_ROUTING_HINT = (
+        0x0905
+        | VehiclePropertyGroup:SYSTEM
+        | VehiclePropertyType:INT32_VEC
+        | VehicleArea:GLOBAL),
+
+    /*
+     * Index in int32Values for AP_POWER_STATE property.
+     */
+    AP_POWER_STATE = (0x00000A00),
+
+  /*
+   * Property to represent brightness of the display. Some cars have single
+   * control for the brightness of all displays and this property is to share
+   * change in that control.
+   *
+   * If this is writable, android side can set this value when user changes
+   * display brightness from Settings. If this is read only, user may still
+   * change display brightness from Settings, but that will not be reflected
+   * to other displays.
+   *
+   * @change_mode VehiclePropertyChangeMode:ON_CHANGE
+   * @access VehiclePropertyAccess:READ|VehiclePropertyAccess:READ_WRITE
+   */
+    DISPLAY_BRIGHTNESS = (
+        0x0A01
+        | VehiclePropertyGroup:SYSTEM
+        | VehiclePropertyType:INT32
+        | VehicleArea:GLOBAL),
+
+    /*
+     * Property to report bootup reason for the current power on. This is a
+     * static property that will not change for the whole duration until power
+     * off. For example, even if user presses power on button after automatic
+     * power on with door unlock, bootup reason must stay with 
+     * VehicleApPowerBootupReason#USER_UNLOCK.
+     *
+     * int32Values[0] must be VehicleApPowerBootupReason.
+     *
+     * @change_mode VehiclePropertyChangeMode:STATIC
+     * @access VehiclePropertyAccess:READ
+    */
+    AP_POWER_BOOTUP_REASON = (
+        0x0A02
+        | VehiclePropertyGroup:SYSTEM
+        | VehiclePropertyType:INT32
+        | VehicleArea:GLOBAL),
+
+    /*
+     * Property to feed H/W input events to android
+     *
+     * int32Values[0] : action defined by VehicleHwKeyInputAction
+     * int32Values[1] : key code, must use standard android key code
+     * int32Values[2] : target display defined in VehicleDisplay. Events not
+     *                  tied to specific display must be sent to
+     *                  VehicleDisplay#MAIN.
+     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
+     * @access VehiclePropertyAccess:READ
+     * @config_flags
+     */
+    HW_KEY_INPUT = (
+        0x0A10
+        | VehiclePropertyGroup:SYSTEM
+        | VehiclePropertyType:INT32_VEC
+        | VehicleArea:GLOBAL),
+
+    /*
+     * Property to define instrument cluster information.
+     * For VehicleInstrumentClusterType:EXTERNAL_DISPLAY:
+     *  READ:
+     *   int32Values[0] : The current screen mode index. Screen mode is defined
+     *                    as a configuration in car service and represents
+     *                    which area of screen is renderable.
+     *   int32Values[1] : Android can render to instrument cluster (=1) or
+     *                    not(=0). When this is 0, instrument cluster may be
+     *                    rendering some information in the area allocated for
+     *                    android and android side rendering is invisible.
+     *  WRITE from android:
+     *   int32Values[0] : Preferred mode for android side. Depending on the app
+     *                    rendering to instrument cluster, preferred mode can
+     *                    change. Instrument cluster still needs to send
+     *                    event with new mode to trigger actual mode change.
+     *   int32Values[1] : The current app context relevant for instrument
+     *                    cluster. Use the same flag with VehicleAudioFocusFlag
+     *                    but this context represents active apps, not
+     *                    active audio. Instrument cluster side may change mode
+     *                    depending on the currently active contexts.
+     *  When system boots up, Android side will write {0, 0, 0, 0} when it is
+     *  ready to render to instrument cluster. Before this message, rendering
+     *  from android must not be visible in the cluster.
+     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
+     * @access VehiclePropertyAccess:READ_WRITE
+     * @configArray 0:VehicleInstrumentClusterType 1:hw type
+     */
+    INSTRUMENT_CLUSTER_INFO = (
+        0x0A20
+        | VehiclePropertyGroup:SYSTEM
+        | VehiclePropertyType:INT32_VEC
+        | VehicleArea:GLOBAL),
+
+    /*
+     * Current date and time, encoded as Unix time.
+     * This value denotes the number of seconds that have elapsed since
+     * 1/1/1970.
+     *
+     * @change_mode VehiclePropertyChangeMode:ON_SET
+     * @access VehiclePropertyAccess:READ_WRITE
+     * @unit VehicleUnit:SECS
+     */
+    UNIX_TIME = (
+        0x0A30
+        | VehiclePropertyGroup:SYSTEM
+        | VehiclePropertyType:INT64
+        | VehicleArea:GLOBAL),
+
+    /*
+     * Current time only.
+     * Some vehicles may not keep track of date.  This property only affects
+     * the current time, in seconds during the day.  Thus, the max value for
+     * this parameter is 86,400 (24 * 60 * 60)
+     *
+     * @change_mode VehiclePropertyChangeMode:ON_SET
+     * @access VehiclePropertyAccess:READ_WRITE
+     * @unit VehicleUnit:SECS
+     */
+    CURRENT_TIME_IN_SECONDS = (
+        0x0A31
+        | VehiclePropertyGroup:SYSTEM
+        | VehiclePropertyType:INT32
+        | VehicleArea:GLOBAL),
+
+    /*
+     * Door position
+     *
+     * This is an integer in case a door may be set to a particular position.
+     * Max value indicates fully open, min value (0) indicates fully closed.
+     *
+     * Some vehicles (minivans) can open the door electronically.  Hence, the
+     * ability to write this property.
+     *
+     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
+     * @access VehiclePropertyAccess:READ|VehiclePropertyAccess:WRITE
+     */
+    DOOR_POS = (
+        0x0B00
+        | VehiclePropertyGroup:SYSTEM
+        | VehiclePropertyType:INT32
+        | VehicleArea:DOOR),
+
+    /*
+     * Door move
+     *
+     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
+     * @access VehiclePropertyAccess:READ_WRITE|VehiclePropertyAccess:WRITE
+     */
+    DOOR_MOVE = (
+        0x0B01
+        | VehiclePropertyGroup:SYSTEM
+        | VehiclePropertyType:INT32
+        | VehicleArea:DOOR),
+
+    /*
+     * Door lock
+     *
+     * 'true' indicates door is locked
+     *
+     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
+     * @access VehiclePropertyAccess:READ_WRITE
+     */
+    DOOR_LOCK = (
+        0x0B02
+        | VehiclePropertyGroup:SYSTEM
+        | VehiclePropertyType:BOOLEAN
+        | VehicleArea:DOOR),
+
+    /*
+     * Mirror Z Position
+     *
+     * Positive value indicates tilt upwards, negative value is downwards
+     *
+     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
+     * @access VehiclePropertyAccess:READ_WRITE
+     */
+    MIRROR_Z_POS = (
+        0x0B40
+        | VehiclePropertyGroup:SYSTEM
+        | VehiclePropertyType:INT32
+        | VehicleArea:MIRROR),
+
+    /*
+     * Mirror Z Move
+     *
+     * Positive value indicates tilt upwards, negative value is downwards
+     *
+     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
+     * @access VehiclePropertyAccess:READ_WRITE|VehiclePropertyAccess:WRITE
+     */
+    MIRROR_Z_MOVE = (
+        0x0B41
+        | VehiclePropertyGroup:SYSTEM
+        | VehiclePropertyType:INT32
+        | VehicleArea:MIRROR),
+
+    /*
+     * Mirror Y Position
+     *
+     * Positive value indicate tilt right, negative value is left
+     *
+     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
+     * @access VehiclePropertyAccess:READ_WRITE
+     */
+    MIRROR_Y_POS = (
+        0x0B42
+        | VehiclePropertyGroup:SYSTEM
+        | VehiclePropertyType:INT32
+        | VehicleArea:MIRROR),
+
+    /*
+     * Mirror Y Move
+     *
+     * Positive value indicate tilt right, negative value is left
+     *
+     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
+     * @access VehiclePropertyAccess:READ_WRITE|VehiclePropertyAccess:WRITE
+     */
+    MIRROR_Y_MOVE = (
+        0x0B43
+        | VehiclePropertyGroup:SYSTEM
+        | VehiclePropertyType:INT32
+        | VehicleArea:MIRROR),
+
+    /*
+     * Mirror Lock
+     *
+     * True indicates mirror positions are locked and not changeable
+     *
+     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
+     * @access VehiclePropertyAccess:READ_WRITE
+     */
+    MIRROR_LOCK = (
+        0x0B44
+        | VehiclePropertyGroup:SYSTEM
+        | VehiclePropertyType:BOOLEAN
+        | VehicleArea:GLOBAL),
+
+    /*
+     * Mirror Heat
+     *
+     * Increase values denote higher heating levels.
+     *
+     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
+     * @access VehiclePropertyAccess:READ_WRITE
+     */
+    MIRROR_HEAT = (
+        0x0B45
+        | VehiclePropertyGroup:SYSTEM
+        | VehiclePropertyType:INT32
+        | VehicleArea:GLOBAL),
+
+    /*
+     * Mirror Fold
+     *
+     * True indicates mirrors are folded
+     *
+     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
+     * @access VehiclePropertyAccess:READ_WRITE
+     */
+    MIRROR_FOLD = (
+        0x0B46
+        | VehiclePropertyGroup:SYSTEM
+        | VehiclePropertyType:BOOLEAN
+        | VehicleArea:GLOBAL),
+
+    /*
+     * Seat memory set
+     *
+     * This setting allows the user to save the current seat position settings
+     * into the selected preset slot.  The maxValue for each seat position shall
+     * match the maxValue for SEAT_MEMORY_SELECT.
+     *
+     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
+     * @access VehiclePropertyAccess:WRITE
+     */
+    SEAT_MEMORY_SELECT = (
+        0x0B80
+        | VehiclePropertyGroup:SYSTEM
+        | VehiclePropertyType:INT32
+        | VehicleArea:SEAT),
+
+    /*
+     * Seat memory set
+     *
+     * This setting allows the user to save the current seat position settings
+     * into the selected preset slot.  The maxValue for each seat position
+     * shall match the maxValue for SEAT_MEMORY_SELECT.
+     *
+     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
+     * @access VehiclePropertyAccess:WRITE
+     */
+    SEAT_MEMORY_SET = (
+        0x0B81
+        | VehiclePropertyGroup:SYSTEM
+        | VehiclePropertyType:INT32
+        | VehicleArea:SEAT),
+
+    /*
+     * Seatbelt buckled
+     *
+     * True indicates belt is buckled.
+     *
+     * Write access indicates automatic seat buckling capabilities.  There are
+     * no known cars at this time, but you never know...
+     *
+     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
+     * @access VehiclePropertyAccess:READ|VehiclePropertyAccess:WRITE
+     */
+    SEAT_BELT_BUCKLED = (
+        0x0B82
+        | VehiclePropertyGroup:SYSTEM
+        | VehiclePropertyType:BOOLEAN
+        | VehicleArea:SEAT),
+
+    /*
+     * Seatbelt height position
+     *
+     * Adjusts the shoulder belt anchor point.
+     * Max value indicates highest position
+     * Min value indicates lowest position
+     *
+     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
+     * @access VehiclePropertyAccess:READ_WRITE
+     */
+    SEAT_BELT_HEIGHT_POS = (
+        0x0B83
+        | VehiclePropertyGroup:SYSTEM
+        | VehiclePropertyType:INT32
+        | VehicleArea:SEAT),
+
+    /*
+     * Seatbelt height move
+     *
+     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
+     * @access VehiclePropertyAccess:READ_WRITE|VehiclePropertyAccess:WRITE
+     */
+    SEAT_BELT_HEIGHT_MOVE = (
+        0x0B84
+        | VehiclePropertyGroup:SYSTEM
+        | VehiclePropertyType:INT32
+        | VehicleArea:SEAT),
+
+    /*
+     * Seat fore/aft position
+     *
+     * Sets the seat position forward (closer to steering wheel) and backwards.
+     * Max value indicates closest to wheel, min value indicates most rearward
+     * position.
+     *
+     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
+     * @access VehiclePropertyAccess:READ_WRITE
+     */
+    SEAT_FORE_AFT_POS = (
+        0x0B85
+        | VehiclePropertyGroup:SYSTEM
+        | VehiclePropertyType:INT32
+        | VehicleArea:SEAT),
+
+    /*
+     * Seat fore/aft move
+     *
+     * Moves the seat position forward and aft.
+     *
+     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
+     * @access VehiclePropertyAccess:READ_WRITE|VehiclePropertyAccess:WRITE
+     */
+    SEAT_FORE_AFT_MOVE = (
+        0x0B86
+        | VehiclePropertyGroup:SYSTEM
+        | VehiclePropertyType:INT32
+        | VehicleArea:SEAT),
+
+    /*
+     * Seat backrest angle 1 position
+     *
+     * Backrest angle 1 is the actuator closest to the bottom of the seat.
+     * Max value indicates angling forward towards the steering wheel.
+     * Min value indicates full recline.
+     *
+     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
+     * @access VehiclePropertyAccess:READ_WRITE
+     */
+    SEAT_BACKREST_ANGLE_1_POS = (
+        0x0B87
+        | VehiclePropertyGroup:SYSTEM
+        | VehiclePropertyType:INT32
+        | VehicleArea:SEAT),
+
+    /*
+     * Seat backrest angle 1 move
+     *
+     * Moves the backrest forward or recline.
+     *
+     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
+     * @access VehiclePropertyAccess:READ_WRITE|VehiclePropertyAccess:WRITE
+     */
+    SEAT_BACKREST_ANGLE_1_MOVE = (
+        0x0B88
+        | VehiclePropertyGroup:SYSTEM
+        | VehiclePropertyType:INT32
+        | VehicleArea:SEAT),
+
+    /*
+     * Seat backrest angle 2 position
+     *
+     * Backrest angle 2 is the next actuator up from the bottom of the seat.
+     * Max value indicates angling forward towards the steering wheel.
+     * Min value indicates full recline.
+     *
+     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
+     * @access VehiclePropertyAccess:READ_WRITE
+     */
+    SEAT_BACKREST_ANGLE_2_POS = (
+        0x0B89
+        | VehiclePropertyGroup:SYSTEM
+        | VehiclePropertyType:INT32
+        | VehicleArea:SEAT),
+
+    /*
+     * Seat backrest angle 2 move
+     *
+     * Moves the backrest forward or recline.
+     *
+     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
+     * @access VehiclePropertyAccess:READ_WRITE|VehiclePropertyAccess:WRITE
+     */
+    SEAT_BACKREST_ANGLE_2_MOVE = (
+        0x0B8A
+        | VehiclePropertyGroup:SYSTEM
+        | VehiclePropertyType:INT32
+        | VehicleArea:SEAT),
+
+    /*
+     * Seat height position
+     *
+     * Sets the seat height.
+     * Max value indicates highest position.
+     * Min value indicates lowest position.
+     *
+     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
+     * @access VehiclePropertyAccess:READ_WRITE
+     */
+    SEAT_HEIGHT_POS = (
+        0x0B8B
+        | VehiclePropertyGroup:SYSTEM
+        | VehiclePropertyType:INT32
+        | VehicleArea:SEAT),
+
+    /*
+     * Seat height move
+     *
+     * Moves the seat height.
+     *
+     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
+     * @access VehiclePropertyAccess:READ_WRITE|VehiclePropertyAccess:WRITE
+     */
+    SEAT_HEIGHT_MOVE = (
+        0x0B8C
+        | VehiclePropertyGroup:SYSTEM
+        | VehiclePropertyType:INT32
+        | VehicleArea:SEAT),
+
+    /*
+     * Seat depth position
+     *
+     * Sets the seat depth, distance from back rest to front edge of seat.
+     * Max value indicates longest depth position.
+     * Min value indicates shortest position.
+     *
+     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
+     * @access VehiclePropertyAccess:READ_WRITE
+     */
+    SEAT_DEPTH_POS = (
+        0x0B8D
+        | VehiclePropertyGroup:SYSTEM
+        | VehiclePropertyType:INT32
+        | VehicleArea:SEAT),
+
+    /*
+     * Seat depth move
+     *
+     * Adjusts the seat depth.
+     *
+     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
+     * @access VehiclePropertyAccess:READ_WRITE|VehiclePropertyAccess:WRITE
+     */
+    SEAT_DEPTH_MOVE = (
+        0x0B8E
+        | VehiclePropertyGroup:SYSTEM
+        | VehiclePropertyType:INT32
+        | VehicleArea:SEAT),
+
+    /*
+     * Seat tilt position
+     *
+     * Sets the seat tilt.
+     * Max value indicates front edge of seat higher than back edge.
+     * Min value indicates front edge of seat lower than back edge.
+     *
+     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
+     * @access VehiclePropertyAccess:READ_WRITE
+     */
+    SEAT_TILT_POS = (
+        0x0B8F
+        | VehiclePropertyGroup:SYSTEM
+        | VehiclePropertyType:INT32
+        | VehicleArea:SEAT),
+
+    /*
+     * Seat tilt move
+     *
+     * Tilts the seat.
+     *
+     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
+     * @access VehiclePropertyAccess:READ_WRITE|VehiclePropertyAccess:WRITE
+     */
+    SEAT_TILT_MOVE = (
+        0x0B90
+        | VehiclePropertyGroup:SYSTEM
+        | VehiclePropertyType:INT32
+        | VehicleArea:SEAT),
+
+    /*
+     * Lumber fore/aft position
+     *
+     * Pushes the lumbar support forward and backwards
+     * Max value indicates most forward position.
+     * Min value indicates most rearward position.
+     *
+     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
+     * @access VehiclePropertyAccess:READ_WRITE
+     */
+    SEAT_LUMBAR_FORE_AFT_POS = (
+        0x0B91
+        | VehiclePropertyGroup:SYSTEM
+        | VehiclePropertyType:INT32
+        | VehicleArea:SEAT),
+
+    /*
+     * Lumbar fore/aft move
+     *
+     * Adjusts the lumbar support.
+     *
+     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
+     * @access VehiclePropertyAccess:READ_WRITE|VehiclePropertyAccess:WRITE
+     */
+    SEAT_LUMBAR_FORE_AFT_MOVE = (
+        0x0B92
+        | VehiclePropertyGroup:SYSTEM
+        | VehiclePropertyType:INT32
+        | VehicleArea:SEAT),
+
+    /*
+     * Lumbar side support position
+     *
+     * Sets the amount of lateral lumbar support.
+     * Max value indicates widest lumbar setting (i.e. least support)
+     * Min value indicates thinnest lumbar setting.
+     *
+     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
+     * @access VehiclePropertyAccess:READ_WRITE
+     */
+    SEAT_LUMBAR_SIDE_SUPPORT_POS = (
+        0x0B93
+        | VehiclePropertyGroup:SYSTEM
+        | VehiclePropertyType:INT32
+        | VehicleArea:SEAT),
+
+    /*
+     * Lumbar side support move
+     *
+     * Adjusts the amount of lateral lumbar support.
+     *
+     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
+     * @access VehiclePropertyAccess:READ_WRITE|VehiclePropertyAccess:WRITE
+     */
+    SEAT_LUMBAR_SIDE_SUPPORT_MOVE = (
+        0x0B94
+        | VehiclePropertyGroup:SYSTEM
+        | VehiclePropertyType:INT32
+        | VehicleArea:SEAT),
+
+    /*
+     * Headrest height position
+     *
+     * Sets the headrest height.
+     * Max value indicates tallest setting.
+     * Min value indicates shortest setting.
+     *
+     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
+     * @access VehiclePropertyAccess:READ_WRITE
+     */
+    SEAT_HEADREST_HEIGHT_POS = (
+        0x0B95
+        | VehiclePropertyGroup:SYSTEM
+        | VehiclePropertyType:INT32
+        | VehicleArea:GLOBAL),
+
+    /*
+     * Headrest heigh move
+     *
+     * Moves the headrest up and down.
+     *
+     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
+     * @access VehiclePropertyAccess:READ_WRITE|VehiclePropertyAccess:WRITE
+     */
+    SEAT_HEADREST_HEIGHT_MOVE = (
+        0x0B96
+        | VehiclePropertyGroup:SYSTEM
+        | VehiclePropertyType:INT32
+        | VehicleArea:SEAT),
+
+    /*
+     * Headrest angle position
+     *
+     * Sets the angle of the headrest.
+     * Max value indicates most upright angle.
+     * Min value indicates shallowest headrest angle.
+     *
+     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
+     * @access VehiclePropertyAccess:READ_WRITE
+     */
+    SEAT_HEADREST_ANGLE_POS = (
+        0x0B97
+        | VehiclePropertyGroup:SYSTEM
+        | VehiclePropertyType:INT32
+        | VehicleArea:SEAT),
+
+    /*
+     * Headrest angle move
+     *
+     * Adjusts the angle of the headrest
+     *
+     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
+     * @access VehiclePropertyAccess:READ_WRITE|VehiclePropertyAccess:WRITE
+     */
+    SEAT_HEADREST_ANGLE_MOVE = (
+        0x0B98
+        | VehiclePropertyGroup:SYSTEM
+        | VehiclePropertyType:INT32
+        | VehicleArea:SEAT),
+
+    /*
+     *
+     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
+     * @access VehiclePropertyAccess:READ_WRITE
+     */
+    SEAT_HEADREST_FORE_AFT_POS = (
+        0x0B99
+        | VehiclePropertyGroup:SYSTEM
+        | VehiclePropertyType:INT32
+        | VehicleArea:SEAT),
+
+    /*
+     *
+     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
+     * @access VehiclePropertyAccess:READ_WRITE|VehiclePropertyAccess:WRITE
+     */
+    SEAT_HEADREST_FORE_AFT_MOVE = (
+        0x0B9A
+        | VehiclePropertyGroup:SYSTEM
+        | VehiclePropertyType:INT32
+        | VehicleArea:SEAT),
+
+    /*
+     * Window Position
+     *
+     * Max = window up / closed
+     * Min = window down / open
+     *
+     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
+     * @access VehiclePropertyAccess:READ_WRITE
+     */
+    WINDOW_POS = (
+        0x0BC0
+        | VehiclePropertyGroup:SYSTEM
+        | VehiclePropertyType:INT32
+        | VehicleArea:GLOBAL),
+
+    /*
+     * Window Move
+     *
+     * Max = window up / closed
+     * Min = window down / open
+     * Magnitude denotes relative speed.  I.e. +2 is faster than +1 in raising
+     * the window.
+     *
+     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
+     * @access VehiclePropertyAccess:READ_WRITE|VehiclePropertyAccess:WRITE
+     */
+    WINDOW_MOVE = (
+        0x0BC1
+        | VehiclePropertyGroup:SYSTEM
+        | VehiclePropertyType:INT32
+        | VehicleArea:GLOBAL),
+
+    /*
+     * Window Vent Position
+     *
+     * This feature is used to control the vent feature on a sunroof.
+     *
+     * Max = vent open
+     * Min = vent closed
+     *
+     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
+     * @access VehiclePropertyAccess:READ_WRITE
+     */
+    WINDOW_VENT_POS = (
+        0x0BC2
+        | VehiclePropertyGroup:SYSTEM
+        | VehiclePropertyType:INT32
+        | VehicleArea:GLOBAL),
+
+    /*
+     * Window Vent Move
+     *
+     * This feature is used to control the vent feature on a sunroof.
+     *
+     * Max = vent open
+     * Min = vent closed
+     *
+     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
+     * @access VehiclePropertyAccess:READ_WRITE|VehiclePropertyAccess:WRITE
+     */
+    WINDOW_VENT_MOVE = (
+        0x0BC3
+        | VehiclePropertyGroup:SYSTEM
+        | VehiclePropertyType:INT32
+        | VehicleArea:GLOBAL),
+
+    /*
+     * Window Lock
+     *
+     * True indicates windows are locked and can't be moved.
+     *
+     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
+     * @access VehiclePropertyAccess:READ_WRITE
+     */
+    WINDOW_LOCK = (
+        0x0BC4
+        | VehiclePropertyGroup:SYSTEM
+        | VehiclePropertyType:BOOLEAN
+        | VehicleArea:GLOBAL),
+};
+
+/*
+ * Bit flags for fan direction
+ */
+enum VehicleHvacFanDirection : int32_t {
+  FACE = 0x1,
+  FLOOR = 0x2,
+  FACE_AND_FLOOR = 0x3,
+  DEFROST = 0x4,
+  DEFROST_AND_FLOOR = 0x5,
+};
+
+/*
+ * Constants relevant to radio.
+ */
+enum VehicleRadioConstants : int32_t {
+  /* Minimum value for the radio preset */
+  VEHICLE_RADIO_PRESET_MIN_VALUE = 1,
+};
+
+enum VehicleAudioFocusRequest : int32_t {
+  REQUEST_GAIN = 0x1,
+  REQUEST_GAIN_TRANSIENT = 0x2,
+  REQUEST_GAIN_TRANSIENT_MAY_DUCK = 0x3,
+  /*
+   * This is for the case where android side plays sound like UI feedback
+   * and car side does not need to duck existing playback as long as
+   * requested stream is available.
+   */
+  REQUEST_GAIN_TRANSIENT_NO_DUCK = 0x4,
+  REQUEST_RELEASE = 0x5,
+
+};
+
+enum VehicleAudioFocusState : int32_t {
+  /*
+   * Android side has permanent focus and can play allowed streams.
+   */
+  STATE_GAIN = 0x1,
+
+  /*
+   * Android side has transient focus and can play allowed streams.
+   */
+  STATE_GAIN_TRANSIENT = 0x2,
+
+  /*
+   * Car audio module is playing guidance kind of sound outside Android.
+   * Android side can still play through allowed streams with ducking.
+   */
+  STATE_LOSS_TRANSIENT_CAN_DUCK = 0x3,
+
+  /*
+   * Car audio module is playing transient sound outside Android. Android side
+   * must stop playing any sounds.
+   */
+  STATE_LOSS_TRANSIENT = 0x4,
+
+  /*
+   * Android side has lost focus and cannot play any sound.
+   */
+  STATE_LOSS = 0x5,
+
+  /*
+   * car audio module is playing safety critical sound, and Android side cannot
+   * request focus until the current state is finished. car audio module
+   * restore it to the previous state when it can allow Android to play.
+   */
+  STATE_LOSS_TRANSIENT_EXLCUSIVE = 0x6,
+
+};
+
+/*
+ * Flags to represent multiple streams by combining these.
+ */
+enum VehicleAudioStreamFlag : int32_t {
+  STREAM0_FLAG = (0x1 << 0),
+  STREAM1_FLAG = (0x1 << 1),
+  STREAM2_FLAG = (0x1 << 2),
+};
+
+/*
+ * Represents stream number (always 0 to N -1 where N is max number of streams).
+ * Can be used for audio related property expecting one stream.
+ */
+enum VehicleAudioStream : int32_t {
+  STREAM0 = 0,
+  STREAM1 = 1,
+};
+
+/*
+ * Flag to represent external focus state (outside Android).
+ */
+enum VehicleAudioExtFocusFlag : int32_t {
+  /*
+   * No external focus holder.
+   */
+  NONE_FLAG = 0x0,
+
+  /*
+   * Car side (outside Android) has component holding GAIN kind of focus state.
+   */
+  PERMANENT_FLAG = 0x1,
+
+  /*
+   * Car side (outside Android) has component holding GAIN_TRANSIENT kind of
+   * focus state.
+   */
+  TRANSIENT_FLAG = 0x2,
+
+  /*
+   * Car side is expected to play something while focus is held by Android side.
+   * One example can be radio attached in car side. But Android's radio app
+   * still must have focus, and Android side must be in GAIN state, but
+   * media stream will not be allocated to Android side and car side can play
+   * radio any time while this flag is active.
+   */
+  PLAY_ONLY_FLAG = 0x4,
+
+  /*
+   * Car side must mute any media including radio. This can be used with any
+   * focus request including GAIN* and RELEASE.
+   */
+  MUTE_MEDIA_FLAG = 0x8,
+};
+
+/*
+ * Index in int32Values for VehicleProperty#AUDIO_FOCUS property.
+ */
+enum VehicleAudioFocusIndex : int32_t {
+  FOCUS = 0,
+  STREAMS = 1,
+  EXTERNAL_FOCUS_STATE = 2,
+  AUDIO_CONTEXTS = 3,
+};
+
+/*
+ * Flags to tell the current audio context.
+ */
+enum VehicleAudioContextFlag : int32_t {
+  /* Music playback is currently active. */
+  MUSIC_FLAG = 0x1,
+
+  /* Navigation is currently running. */
+  NAVIGATION_FLAG = 0x2,
+
+  /* Voice command session is currently running. */
+  VOICE_COMMAND_FLAG = 0x4,
+
+  /* Voice call is currently active. */
+  CALL_FLAG = 0x8,
+
+  /*
+   * Alarm is active.
+   * This must be only used in VehicleProperty#AUDIO_ROUTING_POLICY.
+   */
+  ALARM_FLAG = 0x10,
+
+  /*
+   * Notification sound is active.
+   * This must be only used in VehicleProperty#AUDIO_ROUTING_POLICY.
+   */
+  NOTIFICATION_FLAG = 0x20,
+
+  /*
+   * Context unknown. Only used for VehicleProperty#AUDIO_ROUTING_POLICY to
+   * represent default stream for unknown contents.
+   */
+  UNKNOWN_FLAG = 0x40,
+
+  /* Safety alert / warning is played. */
+  SAFETY_ALERT_FLAG = 0x80,
+
+  /* CD / DVD kind of audio is played */
+  CD_ROM_FLAG = 0x100,
+
+  /* Aux audio input is played */
+  AUX_AUDIO_FLAG = 0x200,
+
+  /* system sound like UI feedback */
+  SYSTEM_SOUND_FLAG = 0x400,
+
+  /* Radio is played */
+  RADIO_FLAG = 0x800,
+
+  /* Ext source is played. This is for tagging generic ext sources. */
+  EXT_SOURCE_FLAG = 0x1000,
+};
+
+/*
+ * flags to represent capability of audio volume property.
+ * used in configArray[1] of VehiclePropConfig.
+ */
+enum VehicleAudioVolumeCapabilityFlag : int32_t {
+  /*
+   * External audio module or vehicle hal has persistent storage
+   * to keep the volume level. This must be set only when per context
+   * volume level is supproted. When this is set, audio volume level per
+   * each context will be retrieved from the property when systen starts up.
+   * And external audio module is also expected to adjust volume automatically
+   * whenever there is an audio context change.
+   * When this flag is not set, android side will assume that there is no
+   * persistent storage and stored value in android side will be used to
+   * initialize the volume level. And android side will set volume level
+   * of each physical streams whenever there is an audio context change.
+   */
+  PERSISTENT_STORAGE = 0x1,
+
+  /*
+   * When this flag is set, the H/W can support only single master volume for
+   * all streams.
+   * There is no way to set volume level differently per each stream or context.
+   */
+  MASTER_VOLUME_ONLY = 0x2,
+};
+
+/*
+ * enum to represent audio volume state.
+ */
+enum VehicleAudioVolumeState : int32_t {
+  STATE_OK = 0,
+
+  /*
+   * Audio volume has reached volume limit set in
+   * VehicleProperty#AUDIO_VOLUME_LIMIT and user's request to increase volume
+   * further is not allowed.
+   */
+  LIMIT_REACHED = 1,
+};
+
+/*
+ * Index in int32Values for VehicleProperty#AUDIO_VOLUME property.
+ */
+enum VehicleAudioVolumeIndex : int32_t {
+  INDEX_STREAM = 0,
+  INDEX_VOLUME = 1,
+  NDEX_STATE = 2,
+};
+
+/*
+ * Index in int32Values for VehicleProperty#AUDIO_VOLUME_LIMIT property.
+ */
+enum VehicleAudioVolumeLimitIndex : int32_t {
+  STREAM = 0,
+  MAX_VOLUME = 1,
+};
+
+/*
+ * Index in int32Values for VehicleProperty#AUDIO_ROUTING_POLICY property.
+ */
+enum VehicleAudioRoutingPolicyIndex : int32_t {
+  STREAM = 0,
+  CONTEXTS = 1,
+};
+
+/*
+ * Flag to be used in VehiclePropConfig#configFlags for
+ * VehicleProperty#AUDIO_HW_VARIANT.
+ */
+enum VehicleAudioHwVariantConfigFlag : int32_t {
+  /*
+   * Flag to tell that radio is internal to android and radio must
+   * be treated like other android stream like media.
+   * When this flag is not set or AUDIO_HW_VARIANT does not exist,
+   * radio is treated as external module. This brins some delta in audio focus
+   * handling as well.
+   */
+  INTERNAL_RADIO_FLAG = 0x1,
+};
+
+enum VehicleApPowerStateConfigFlag : int32_t /* NOTE: type is guessed */ {
+  /*
+   * AP can enter deep sleep state. If not set, AP will always shutdown from
+   * VehicleApPowerState#SHUTDOWN_PREPARE power state.
+   */
+  ENABLE_DEEP_SLEEP_FLAG = 0x1,
+
+  /*
+   * The power controller can power on AP from off state after timeout
+   * specified in VehicleApPowerSet VEHICLE_AP_POWER_SET_SHUTDOWN_READY message.
+   */
+  CONFIG_SUPPORT_TIMER_POWER_ON_FLAG = 0x2,
+};
+
+enum VehicleApPowerState : int32_t /* NOTE: type is guessed */ {
+  /* vehicle HAL will never publish this state to AP */
+  OFF = 0,
+
+  /* vehicle HAL will never publish this state to AP */
+  DEEP_SLEEP = 1,
+
+  /* AP is on but display must be off. */
+  ON_DISP_OFF = 2,
+
+  /* AP is on with display on. This state allows full user interaction. */
+  ON_FULL = 3,
+
+  /*
+   * The power controller has requested AP to shutdown. AP can either enter
+   * sleep state or start full shutdown. AP can also request postponing
+   * shutdown by sending VehicleApPowerSetState#SHUTDOWN_POSTPONE message. The
+   * power controller must change power state to this state to shutdown
+   * system.
+   *
+   * int32Values[1] : one of enum_vehicle_ap_power_state_shutdown_param_type
+   */
+  SHUTDOWN_PREPARE = 4,
+};
+
+enum VehicleApPowerStateShutdownParam : int32_t {
+  /* AP must shutdown immediately. Postponing is not allowed. */
+  SHUTDOWN_IMMEDIATELY = 1,
+
+  /* AP can enter deep sleep instead of shutting down completely. */
+  CAN_SLEEP = 2,
+
+  /* AP can only shutdown with postponing allowed. */
+  SHUTDOWN_ONLY = 3,
+};
+
+enum VehicleApPowerSetState : int32_t /* NOTE: type is guessed */ {
+  /*
+   * AP has finished boot up, and can start shutdown if requested by power
+   * controller.
+   */
+  BOOT_COMPLETE = 0x1,
+
+  /*
+   * AP is entering deep sleep state. How this state is implemented may vary
+   * depending on each H/W, but AP's power must be kept in this state.
+   */
+  DEEP_SLEEP_ENTRY = 0x2,
+
+  /*
+   * AP is exiting from deep sleep state, and is in
+   * VehicleApPowerState#SHUTDOWN_PREPARE state.
+   * The power controller may change state to other ON states based on the
+   * current state.
+   */
+  DEEP_SLEEP_EXIT = 0x3,
+
+  /*
+   * int32Values[1]: Time to postpone shutdown in ms. Maximum value can be
+   *                 5000 ms.
+   *                 If AP needs more time, it will send another POSTPONE
+   *                 message before the previous one expires.
+   */
+  SHUTDOWN_POSTPONE = 0x4,
+
+  /*
+   * AP is starting shutting down. When system completes shutdown, everything
+   * will stop in AP as kernel will stop all other contexts. It is
+   * responsibility of vehicle HAL or lower level to synchronize that state
+   * with external power controller. As an example, some kind of ping
+   * with timeout in power controller can be a solution.
+   *
+   * int32Values[1]: Time to turn on AP in secs. Power controller may turn on
+   *                 AP after specified time so that AP can run tasks like
+   *                 update. If it is set to 0, there is no wake up, and power
+   *                 controller may not necessarily support wake-up. If power
+   *                 controller turns on AP due to timer, it must start with
+   *                 VehicleApPowerState#ON_DISP_OFF state, and after
+   *                 receiving VehicleApPowerSetState#BOOT_COMPLETE, it shall
+   *                 do state transition to
+   *                 VehicleApPowerState#SHUTDOWN_PREPARE.
+   */
+  SHUTDOWN_START = 0x5,
+
+  /*
+   * User has requested to turn off headunit's display, which is detected in
+   * android side.
+   * The power controller may change the power state to
+   * VehicleApPowerState#ON_DISP_OFF.
+   */
+  DISPLAY_OFF = 0x6,
+
+  /*
+   * User has requested to turn on headunit's display, most probably from power
+   * key input which is attached to headunit. The power controller may change
+   * the power state to VehicleApPowerState#ON_FULL.
+   */
+  DISPLAY_ON = 0x7,
+};
+
+/*
+ * Index in int32Values for VehicleProperty#AP_POWER_STATE property.
+ */
+enum VehicleApPowerStateIndex : int32_t {
+  STATE = 0,
+  ADDITIONAL = 1,
+};
+
+/*
+ * Enum to represent bootup reason.
+ */
+enum VehicleApPowerBootupReason : int32_t {
+  /*
+   * Power on due to user's pressing of power key or rotating of ignition
+   * switch.
+   */
+  USER_POWER_ON = 0,
+
+  /*
+   * Automatic power on triggered by door unlock or any other kind of automatic
+   * user detection.
+   */
+  USER_UNLOCK = 1,
+
+  /*
+   * Automatic power on triggered by timer. This only happens when AP has asked
+   * wake-up after
+   * certain time through time specified in
+   * VehicleApPowerSetState#SHUTDOWN_START.
+   */
+  TIMER = 2,
+};
+
+enum VehicleHwKeyInputAction : int32_t {
+  /* Key down */
+  ACTION_DOWN = 0,
+
+  /* Key up */
+  ACTION_UP = 1,
+};
+
+enum VehicleDisplay : int32_t {
+  /* center console */
+  MAIN = 0,
+
+  INSTRUMENT_CLUSTER = 1,
+};
+
+/*
+ * Represents instrument cluster type available in system
+ */
+enum VehicleInstrumentClusterType : int32_t {
+  /* Android has no access to instument cluster */
+  NONE = 0,
+
+  /*
+   * Instrument cluster can communicate through vehicle hal with additional
+   * properties to exchange meta-data
+   */
+  HAL_INTERFACE = 1,
+
+  /*
+   * Instrument cluster is external display where android can render contents
+   */
+  EXTERNAL_DISPLAY = 2,
+};
+
+/*
+ * Units used for int or float type with no attached enum types.
+ */
+enum VehicleUnit : int32_t {
+    SHOULD_NOT_USE = 0x000,
+
+    METER_PER_SEC  = 0x01,
+    RPM            = 0x02,
+    HZ             = 0x03,
+    PERCENTILE     = 0x10,
+    MILLIMETER     = 0x20,
+    METER          = 0x21,
+    KILOMETER      = 0x23,
+    CELCIUS        = 0x30,
+    MILLILITER     = 0x40,
+    NANO_SECS      = 0x50,
+    SECS           = 0x53,
+    YEAR           = 0x59,
+};
+
+  /*
+   * This describes how value of property can change.
+   */
+enum VehiclePropertyChangeMode : int32_t {
+  /*
+   * Property of this type must never be changed. Subscription is not supported
+   * for these properties.
+   */
+  STATIC = 0x00,
+
+  /*
+   * Property of this type must be reported when there is a change.
+   * IVehicle#get call must return the current value.
+   * Set operation for this property is assumed to be asynchronous. When the
+   * property is read (using IVehicle#get) after IVehicle#set, it may still
+   * return old value until underlying H/W backing this property has actually
+   * changed the state. Once state is changed, the property must dispatch
+   * changed value as event.
+   */
+  ON_CHANGE = 0x01,
+
+  /*
+   * Property of this type change continuously and requires fixed rate of
+   * sampling to retrieve the data.
+   */
+  CONTINUOUS = 0x02,
+
+  /*
+   * Property of this type may be polled to get the current value.
+   */
+  POLL = 0x03,
+
+  /*
+   * This is for property where change event must be sent only when the
+   * value is set from external component. Normal value change must not trigger
+   * event. For example, clock property can send change event only when it is
+   * set, outside android, for case like user setting time or time getting
+   * update. There is no need to send it per every value change.
+   */
+  ON_SET = 0x04,
+};
+
+/*
+ * Property config defines the capabilities of it. User of the API
+ * must first get the property config to understand the output from get()
+ * commands and also to ensure that set() or events commands are in sync with
+ * the expected output.
+ */
+enum VehiclePropertyAccess : int32_t {
+  READ = 0x01,
+  WRITE = 0x02,
+  READ_WRITE = 0x03,
+};
+
+/*
+ * These permissions define how the OEMs want to distribute their information
+ * and security they want to apply. On top of these restrictions, android will
+ * have additional 'app-level' permissions that the apps will need to ask the
+ * user before the apps have the information.
+ * This information must be kept in VehiclePropConfig#permissionModel.
+ */
+enum VehiclePermissionModel : int32_t {
+  /*
+   * No special restriction, but each property can still require specific
+   * android app-level permission.
+   */
+  NO_RESTRICTION = 0,
+
+  /* Signature only. Only APKs signed with OEM keys are allowed. */
+  OEM_ONLY = 0x1,
+
+  /* System only. APKs built-in to system  can access the property. */
+  SYSTEM_APP_ONLY = 0x2,
+
+  /* Equivalent to “system|signature” */
+  OEM_OR_SYSTEM_APP = 0x3,
+};
+
+/*
+ * Car states.
+ *
+ * The driving states determine what features of the UI will be accessible.
+ */
+enum VehicleDrivingStatus : int32_t {
+  UNRESTRICTED = 0x00,
+  NO_VIDEO = 0x01,
+  NO_KEYBOARD_INPUT = 0x02,
+  NO_VOICE_INPUT = 0x04,
+  NO_CONFIG = 0x08,
+  LIMIT_MESSAGE_LEN = 0x10,
+};
+
+/*
+ * Various gears which can be selected by user and chosen in system.
+ */
+enum VehicleGear: int32_t {
+  GEAR_NEUTRAL = 0x0001,
+  GEAR_REVERSE = 0x0002,
+  GEAR_PARK = 0x0004,
+  GEAR_DRIVE = 0x0008,
+  GEAR_LOW = 0x0010,
+  GEAR_1 = 0x0010,
+  GEAR_2 = 0x0020,
+  GEAR_3 = 0x0040,
+  GEAR_4 = 0x0080,
+  GEAR_5 = 0x0100,
+  GEAR_6 = 0x0200,
+  GEAR_7 = 0x0400,
+  GEAR_8 = 0x0800,
+  GEAR_9 = 0x1000,
+};
+
+/*
+ * Various zones in the car.
+ *
+ * Zones are used for Air Conditioning purposes and divide the car into physical
+ * area zones.
+ */
+enum VehicleAreaZone : int32_t {
+  ROW_1_LEFT = 0x00000001,
+  ROW_1_CENTER = 0x00000002,
+  ROW_1_RIGHT = 0x00000004,
+  ROW_1 = 0x00000008,
+  ROW_2_LEFT = 0x00000010,
+  ROW_2_CENTER = 0x00000020,
+  ROW_2_RIGHT = 0x00000040,
+  ROW_2 = 0x00000080,
+  ROW_3_LEFT = 0x00000100,
+  ROW_3_CENTER = 0x00000200,
+  ROW_3_RIGHT = 0x00000400,
+  ROW_3 = 0x00000800,
+  ROW_4_LEFT = 0x00001000,
+  ROW_4_CENTER = 0x00002000,
+  ROW_4_RIGHT = 0x00004000,
+  ROW_4 = 0x00008000,
+  WHOLE_CABIN = 0x80000000,
+};
+
+/*
+ * Various Seats in the car.
+ */
+enum VehicleAreaSeat : int32_t {
+    ROW_1_PASSENGER_LEFT = 0x0001,
+    ROW_1_PASSENGER_CENTER = 0x0002,
+    ROW_1_PASSENGER_RIGHT = 0x0004,
+    ROW_2_PASSENGER_LEFT = 0x0010,
+    ROW_2_PASSENGER_CENTER = 0x0020,
+    ROW_2_PASSENGER_RIGHT = 0x0040,
+    ROW_3_PASSENGER_LEFT = 0x0100,
+    ROW_3_PASSENGER_CENTER = 0x0200,
+    ROW_3_PASSENGER_RIGHT = 0x0400,
+};
+
+/*
+ * Various windshields/windows in the car.
+ */
+enum VehicleAreaWindow : int32_t {
+    FRONT_WINDSHIELD = 0x0001,
+    REAR_WINDSHIELD = 0x0002,
+    ROOF_TOP = 0x0004,
+    ROW_1_LEFT = 0x0010,
+    ROW_1_RIGHT = 0x0020,
+    ROW_2_LEFT = 0x0100,
+    ROW_2_RIGHT = 0x0200,
+    ROW_3_LEFT = 0x1000,
+    ROW_3_RIGHT = 0x2000,
+};
+
+enum VehicleAreaDoor : int32_t {
+    ROW_1_LEFT = 0x00000001,
+    ROW_1_RIGHT = 0x00000004,
+    ROW_2_LEFT = 0x00000010,
+    ROW_2_RIGHT = 0x00000040,
+    ROW_3_LEFT = 0x00000100,
+    ROW_3_RIGHT = 0x00000400,
+    HOOD = 0x10000000,
+    REAR = 0x20000000,
+};
+
+enum VehicleAreaMirror : int32_t {
+    DRIVER_LEFT = 0x00000001,
+    DRIVER_RIGHT = 0x00000002,
+    DRIVER_CENTER = 0x00000004,
+};
+
+enum VehicleTurnSignal : int32_t {
+    NONE = 0x00,
+    RIGHT = 0x01,
+    LEFT = 0x02,
+    EMERGENCY = 0x04,
+};
+
+struct VehicleAreaConfig {
+    /*
+     * Area id is ignored for VehiclePropertyGroup:GLOBAL properties.
+     */
+    int32_t areaId;
+
+    int32_t minInt32Value;
+    int32_t maxInt32Value;
+
+    int64_t minInt64Value;
+    int64_t maxInt64Value;
+
+    float minFloatValue;
+    float maxFloatValue;
+};
+
+struct VehiclePropConfig {
+    VehicleProperty prop;
+
+    /*
+     * Defines if the property is read or write or both.
+     */
+    VehiclePropertyAccess access;
+
+    /*
+     * Defines the change mode of the property.
+     */
+    VehiclePropertyChangeMode changeMode;
+
+    /*
+     * Defines permission model to access the data.
+     */
+    VehiclePermissionModel permissionModel;
+
+    /*
+     * Some of the properties may have associated areas (for example, some hvac
+     * properties are associated with VehicleAreaZone), in these
+     * cases the config may contain an ORed value for the associated areas.
+     */
+    int32_t supportedAreas;
+
+    /*
+     * Contains per-area configuration.
+     */
+    vec<VehicleAreaConfig> areaConfigs;
+
+    /*
+     * Configuration flags for this property.
+     *
+     * For example, it may store the number of presets that are stored by the
+     * radio module.
+     */
+    int32_t configFlags;
+
+    /* Contains additional configuration parameters */
+    vec<int32_t> configArray;
+
+    /*
+     * Some properties may require additional information passed over this
+     * string. Most properties do not need to set this.
+     */
+    string configString;
+
+    /*
+     * Min sample rate in Hz.
+     * Must be defined for VehiclePropertyChangeMode::CONTINUOUS
+     */
+    float minSampleRate;
+
+    /*
+     * Must be defined for VehiclePropertyChangeMode::CONTINUOUS
+     * Max sample rate in Hz.
+     */
+    float maxSampleRate;
+};
+
+/*
+ * Encapsulates the property name and the associated value. It
+ * is used across various API calls to set values, get values or to register for
+ * events.
+ */
+struct VehiclePropValue {
+    /* Property identifier */
+    VehicleProperty prop;
+
+    /* Time is elapsed nanoseconds since boot */
+    int64_t timestamp;
+
+    /*
+     * Area type(s) for non-global property it must be one of the value from
+     * VehicleArea* enums or 0 for global properties.
+     */
+    int32_t areaId;
+
+    /*
+     * Contains value for a single property. Depending on property data type of
+     * this property (VehiclePropetyType) one field of this structure must be filled in.
+     */
+    struct RawValue {
+        /*
+         * This is used for properties of types VehiclePropertyType#INT
+         * and VehiclePropertyType#INT_VEC
+         */
+        vec<int32_t> int32Values;
+
+        /*
+         * This is used for properties of types VehiclePropertyType#FLOAT
+         * and VehiclePropertyType#FLOAT_VEC
+         */
+        vec<float> floatValues;
+
+        /* This is used for properties of type VehiclePropertyType#INT64 */
+        vec<int64_t> int64Values;
+
+        /* This is used for properties of type VehiclePropertyType#BYTES */
+        vec<uint8_t> bytes;
+
+        /* This is used for properties of type VehiclePropertyType#STRING */
+        string stringValue;
+    };
+
+    RawValue value;
+};
+
+
+/*
+ * Represent the operation where the current error has happened.
+ */
+enum VehiclePropertyOperation : int32_t {
+    /*
+     * Generic error to this property which is not tied to any operation.
+     */
+    GENERIC = 0,
+
+    /*
+     * Error happened while handling property set.
+     */
+    SET = 1,
+
+    /*
+     * Error happened while handling property get.
+     */
+    GET = 2,
+
+    /*
+     * Error happened while handling property subscription.
+     */
+    SUBSCRIBE = 3,
+};
+
+
+enum SubscribeFlags {
+  UNDEFINED = 0x0,
+
+  /* Subscribe to event that was originated in vehicle HAL (most luckly this
+   * event came from vehicle itself). */
+  HAL_EVENT = 0x1,
+
+  /* Use this flag to subscribe on events when IVehicle#set(...) was called by
+   * vehicle HAL's client (e.g. Car Service). */
+  SET_CALL = 0x2,
+
+  DEFAULT = HAL_EVENT,
+};
+
+/*
+ * Encapsulates information about subscription to vehicle property events.
+ */
+struct SubscribeOptions {
+  /* Property to subscribe */
+
+  VehicleProperty propId;
+
+  /* Area ids - this must be a bit mask of areas to subscribe or 0 to subscribe to all areas. */
+  int32_t vehicleAreas;
+
+  /*
+   * Sample rate in Hz.
+   *
+   * Must be provided for properties with
+   * VehiclePropertyChangeMode::CONTINUOUS. The value must be within
+   * VehiclePropConfig#minSamplingRate .. VehiclePropConfig#maxSamplingRate
+   * for a given property.
+   * This value indicates how many updates per second client wants to receive.
+   */
+  float sampleRate;
+
+  /*
+   * Flags that indicates what kind of events listen to.
+   */
+  SubscribeFlags flags;
+};
+
+/* Error codes used in vehicle HAL interface. */
+enum StatusCode {
+  OK = 0,
+
+  /* Try again. */
+  TRY_AGAIN = -11,
+
+  /* Invalid argument provided. */
+  INVALID_ARG = -22,
+
+  /*
+   * This code must be returned when device that associated with the vehicle
+   * property is not available. For example, when client tries to set HVAC
+   * temperature when the whole HVAC unit is turned OFF.
+   */
+  NOT_AVAILABLE = -108,
+};
diff --git a/vibrator/1.0/Android.bp b/vibrator/1.0/Android.bp
new file mode 100644
index 0000000..64afdb5
--- /dev/null
+++ b/vibrator/1.0/Android.bp
@@ -0,0 +1,46 @@
+// This file is autogenerated by hidl-gen. Do not edit manually.
+
+genrule {
+    name: "android.hardware.vibrator@1.0_genc++",
+    tool: "hidl-gen",
+    cmd: "$tool -o $genDir -Lc++ -randroid.hardware:hardware/interfaces android.hardware.vibrator@1.0",
+    srcs: [
+        "types.hal",
+        "IVibrator.hal",
+    ],
+    out: [
+        "android/hardware/vibrator/1.0/types.cpp",
+        "android/hardware/vibrator/1.0/VibratorAll.cpp",
+    ],
+}
+
+genrule {
+    name: "android.hardware.vibrator@1.0_genc++_headers",
+    tool: "hidl-gen",
+    cmd: "$tool -o $genDir -Lc++ -randroid.hardware:hardware/interfaces android.hardware.vibrator@1.0",
+    srcs: [
+        "types.hal",
+        "IVibrator.hal",
+    ],
+    out: [
+        "android/hardware/vibrator/1.0/types.h",
+        "android/hardware/vibrator/1.0/IVibrator.h",
+        "android/hardware/vibrator/1.0/IHwVibrator.h",
+        "android/hardware/vibrator/1.0/BnVibrator.h",
+        "android/hardware/vibrator/1.0/BpVibrator.h",
+        "android/hardware/vibrator/1.0/BsVibrator.h",
+    ],
+}
+
+cc_library_shared {
+    name: "android.hardware.vibrator@1.0",
+    generated_sources: ["android.hardware.vibrator@1.0_genc++"],
+    generated_headers: ["android.hardware.vibrator@1.0_genc++_headers"],
+    export_generated_headers: ["android.hardware.vibrator@1.0_genc++_headers"],
+    shared_libs: [
+        "libhidl",
+        "libhwbinder",
+        "libutils",
+        "libcutils",
+    ],
+}
diff --git a/vibrator/1.0/Android.mk b/vibrator/1.0/Android.mk
new file mode 100644
index 0000000..54ac2f6
--- /dev/null
+++ b/vibrator/1.0/Android.mk
@@ -0,0 +1,102 @@
+# This file is autogenerated by hidl-gen. Do not edit manually.
+
+LOCAL_PATH := $(call my-dir)
+
+################################################################################
+
+include $(CLEAR_VARS)
+LOCAL_MODULE := android.hardware.vibrator@1.0-java
+LOCAL_MODULE_CLASS := JAVA_LIBRARIES
+
+intermediates := $(local-generated-sources-dir)
+
+HIDL := $(HOST_OUT_EXECUTABLES)/hidl-gen$(HOST_EXECUTABLE_SUFFIX)
+
+#
+# Build types.hal (Status)
+#
+GEN := $(intermediates)/android/hardware/vibrator/1.0/Status.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vibrator@1.0::types.Status
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build IVibrator.hal
+#
+GEN := $(intermediates)/android/hardware/vibrator/1.0/IVibrator.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/IVibrator.hal
+$(GEN): PRIVATE_DEPS += $(LOCAL_PATH)/types.hal
+$(GEN): $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vibrator@1.0::IVibrator
+
+$(GEN): $(LOCAL_PATH)/IVibrator.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+include $(BUILD_JAVA_LIBRARY)
+
+
+################################################################################
+
+include $(CLEAR_VARS)
+LOCAL_MODULE := android.hardware.vibrator@1.0-java-static
+LOCAL_MODULE_CLASS := JAVA_LIBRARIES
+
+intermediates := $(local-generated-sources-dir)
+
+HIDL := $(HOST_OUT_EXECUTABLES)/hidl-gen$(HOST_EXECUTABLE_SUFFIX)
+
+#
+# Build types.hal (Status)
+#
+GEN := $(intermediates)/android/hardware/vibrator/1.0/Status.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vibrator@1.0::types.Status
+
+$(GEN): $(LOCAL_PATH)/types.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+#
+# Build IVibrator.hal
+#
+GEN := $(intermediates)/android/hardware/vibrator/1.0/IVibrator.java
+$(GEN): $(HIDL)
+$(GEN): PRIVATE_HIDL := $(HIDL)
+$(GEN): PRIVATE_DEPS := $(LOCAL_PATH)/IVibrator.hal
+$(GEN): PRIVATE_DEPS += $(LOCAL_PATH)/types.hal
+$(GEN): $(LOCAL_PATH)/types.hal
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+        $(PRIVATE_HIDL) -o $(PRIVATE_OUTPUT_DIR) \
+        -Ljava -randroid.hardware:hardware/interfaces \
+        android.hardware.vibrator@1.0::IVibrator
+
+$(GEN): $(LOCAL_PATH)/IVibrator.hal
+	$(transform-generated-source)
+LOCAL_GENERATED_SOURCES += $(GEN)
+include $(BUILD_STATIC_JAVA_LIBRARY)
+
+
+
+include $(call all-makefiles-under,$(LOCAL_PATH))
diff --git a/vibrator/1.0/IVibrator.hal b/vibrator/1.0/IVibrator.hal
new file mode 100644
index 0000000..0a4ffca
--- /dev/null
+++ b/vibrator/1.0/IVibrator.hal
@@ -0,0 +1,35 @@
+/*
+ * Copyright (C) 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.vibrator@1.0;
+
+interface IVibrator {
+  /** Turn on vibrator
+   *
+   * This function must only be called after the previous timeout has expired or
+   * was canceled (through off()).
+   * @param timeout_ms number of milliseconds to vibrate.
+   * @return vibratorOnRet whether vibrator command was successful or not.
+   */
+  on(uint32_t timeoutMs) generates (Status vibratorOnRet);
+
+  /** Turn off vibrator
+   *
+   * Cancel a previously-started vibration, if any.
+   * @return vibratorOffRet whether vibrator command was successful or not.
+   */
+  off() generates (Status vibratorOffRet);
+};
diff --git a/vibrator/1.0/default/Android.bp b/vibrator/1.0/default/Android.bp
new file mode 100644
index 0000000..4dd00dd
--- /dev/null
+++ b/vibrator/1.0/default/Android.bp
@@ -0,0 +1,27 @@
+//
+// Copyright (C) 2016 The Android Open Source Project
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//      http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+cc_library_shared {
+    name: "android.hardware.vibrator@1.0-impl",
+    relative_install_path: "hw",
+    srcs: ["Vibrator.cpp"],
+    shared_libs: [
+        "libhidl",
+        "liblog",
+        "libhwbinder",
+        "libutils",
+        "libhardware",
+        "android.hardware.vibrator@1.0",
+    ],
+}
diff --git a/vibrator/1.0/default/Android.mk b/vibrator/1.0/default/Android.mk
new file mode 100644
index 0000000..2b168bb
--- /dev/null
+++ b/vibrator/1.0/default/Android.mk
@@ -0,0 +1,34 @@
+#
+# Copyright (C) 2016 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+
+LOCAL_PATH := $(call my-dir)
+
+include $(CLEAR_VARS)
+LOCAL_MODULE := android.hardware.vibrator@1.0-service
+LOCAL_INIT_RC := android.hardware.vibrator@1.0-service.rc
+LOCAL_MODULE_RELATIVE_PATH := hw
+LOCAL_SRC_FILES := \
+  service.cpp \
+
+LOCAL_SHARED_LIBRARIES := \
+  libhidl \
+  liblog \
+  libhwbinder \
+  libutils \
+  libhardware \
+  android.hardware.vibrator@1.0
+
+include $(BUILD_EXECUTABLE)
diff --git a/vibrator/1.0/default/Vibrator.cpp b/vibrator/1.0/default/Vibrator.cpp
new file mode 100644
index 0000000..4cd3b30
--- /dev/null
+++ b/vibrator/1.0/default/Vibrator.cpp
@@ -0,0 +1,76 @@
+/*
+ * Copyright (C) 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#define LOG_TAG "VibratorService"
+
+#include <hardware/hardware.h>
+#include <hardware/vibrator.h>
+#include "Vibrator.h"
+
+namespace android {
+namespace hardware {
+namespace vibrator {
+namespace V1_0 {
+namespace implementation {
+
+Vibrator::Vibrator(vibrator_device_t *device) : mDevice(device) {}
+
+// Methods from ::android::hardware::vibrator::V1_0::IVibrator follow.
+Return<Status> Vibrator::on(uint32_t timeout_ms) {
+    int32_t ret = mDevice->vibrator_on(mDevice, timeout_ms);
+    if (ret != 0) {
+        ALOGE("on command failed : %s", strerror(-ret));
+        return Status::ERR;
+    }
+    return Status::OK;
+}
+
+Return<Status> Vibrator::off()  {
+    int32_t ret = mDevice->vibrator_off(mDevice);
+    if (ret != 0) {
+        ALOGE("off command failed : %s", strerror(-ret));
+        return Status::ERR;
+    }
+    return Status::OK;
+}
+
+IVibrator* HIDL_FETCH_IVibrator(const char *hal) {
+    vibrator_device_t *vib_device;
+    const hw_module_t *hw_module = nullptr;
+
+    int ret = hw_get_module(hal, &hw_module);
+    if (ret == 0) {
+        ret = vibrator_open(hw_module, &vib_device);
+        if (ret != 0) {
+            ALOGE("vibrator_open %s failed: %d", hal, ret);
+        }
+    } else {
+        ALOGE("hw_get_module %s failed: %d", hal, ret);
+    }
+
+    if (ret == 0) {
+        return new Vibrator(vib_device);
+    } else {
+        ALOGE("Passthrough failed to open legacy HAL.");
+        return nullptr;
+    }
+}
+
+} // namespace implementation
+}  // namespace V1_0
+}  // namespace vibrator
+}  // namespace hardware
+}  // namespace android
diff --git a/vibrator/1.0/default/Vibrator.h b/vibrator/1.0/default/Vibrator.h
new file mode 100644
index 0000000..36c4cc1
--- /dev/null
+++ b/vibrator/1.0/default/Vibrator.h
@@ -0,0 +1,56 @@
+/*
+ * Copyright (C) 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef HIDL_GENERATED_android_hardware_vibrator_V1_0_Vibrator_H_
+#define HIDL_GENERATED_android_hardware_vibrator_V1_0_Vibrator_H_
+
+#include <android/hardware/vibrator/1.0/IVibrator.h>
+#include <hidl/Status.h>
+
+#include <hidl/MQDescriptor.h>
+namespace android {
+namespace hardware {
+namespace vibrator {
+namespace V1_0 {
+namespace implementation {
+
+using ::android::hardware::vibrator::V1_0::IVibrator;
+using ::android::hardware::vibrator::V1_0::Status;
+using ::android::hardware::Return;
+using ::android::hardware::Void;
+using ::android::hardware::hidl_vec;
+using ::android::hardware::hidl_string;
+using ::android::sp;
+
+struct Vibrator : public IVibrator {
+  Vibrator(vibrator_device_t *device);
+
+  // Methods from ::android::hardware::vibrator::V1_0::IVibrator follow.
+  Return<Status> on(uint32_t timeoutMs)  override;
+  Return<Status> off()  override;
+
+  private:
+    vibrator_device_t    *mDevice;
+};
+
+extern "C" IVibrator* HIDL_FETCH_IVibrator(const char* name);
+
+}  // namespace implementation
+}  // namespace V1_0
+}  // namespace vibrator
+}  // namespace hardware
+}  // namespace android
+
+#endif  // HIDL_GENERATED_android_hardware_vibrator_V1_0_Vibrator_H_
diff --git a/vibrator/1.0/default/android.hardware.vibrator@1.0-service.rc b/vibrator/1.0/default/android.hardware.vibrator@1.0-service.rc
new file mode 100644
index 0000000..a7836b3
--- /dev/null
+++ b/vibrator/1.0/default/android.hardware.vibrator@1.0-service.rc
@@ -0,0 +1,4 @@
+service vibrator-1-0 /system/bin/hw/android.hardware.vibrator@1.0-service
+    class hal
+    user system
+    group system readproc
diff --git a/vibrator/1.0/default/service.cpp b/vibrator/1.0/default/service.cpp
new file mode 100644
index 0000000..a4a7132
--- /dev/null
+++ b/vibrator/1.0/default/service.cpp
@@ -0,0 +1,59 @@
+/*
+ * Copyright (C) 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#define LOG_TAG "android.hardware.vibrator@1.0-service"
+#include <utils/Log.h>
+
+#include <iostream>
+#include <unistd.h>
+
+#include <android/hardware/vibrator/1.0/IVibrator.h>
+
+#include <hidl/IServiceManager.h>
+#include <hwbinder/IPCThreadState.h>
+#include <hwbinder/ProcessState.h>
+#include <utils/Errors.h>
+#include <utils/StrongPointer.h>
+
+using android::sp;
+
+// libhwbinder:
+using android::hardware::IPCThreadState;
+using android::hardware::ProcessState;
+
+// Generated HIDL files
+using android::hardware::vibrator::V1_0::IVibrator;
+
+int main() {
+    ALOGI("Service is starting.");
+    const char instance[] = "vibrator";
+    ALOGI("Retrieving default implementation of instance %s.",
+          instance);
+    android::sp<IVibrator> service = IVibrator::getService(instance, true);
+    if (service.get() == nullptr) {
+        ALOGE("IVibrator::getService returned NULL, exiting");
+        return -1;
+    }
+    ALOGI("Default implementation using %s is %s",
+          instance, (service->isRemote() ? "REMOTE" : "LOCAL"));
+    LOG_FATAL_IF(service->isRemote(), "Implementation is REMOTE!");
+    ALOGI("Registering instance %s.", instance);
+    service->registerAsService(instance);
+    ALOGI("Ready.");
+
+    ProcessState::self()->setThreadPoolMaxThreadCount(0);
+    ProcessState::self()->startThreadPool();
+    IPCThreadState::self()->joinThreadPool();
+}
diff --git a/vibrator/1.0/types.hal b/vibrator/1.0/types.hal
new file mode 100644
index 0000000..8fc5683
--- /dev/null
+++ b/vibrator/1.0/types.hal
@@ -0,0 +1,22 @@
+/*
+ * Copyright (C) 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.vibrator@1.0;
+
+enum Status: uint32_t {
+    OK             = 0,
+    ERR            = 1
+};