Initial commit of public Codec2 HIDL interfaces
Test: Builds
Bug: 112362730
Bug: 115717053
Change-Id: I8ad7fe965a90d56b5bbfd23998d4585f6e634bd6
diff --git a/media/c2/1.0/IConfigurable.hal b/media/c2/1.0/IConfigurable.hal
new file mode 100644
index 0000000..31dc4d3
--- /dev/null
+++ b/media/c2/1.0/IConfigurable.hal
@@ -0,0 +1,241 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.media.c2@1.0;
+
+/**
+ * Generic configuration interface presented by all configurable Codec2 objects.
+ *
+ * This interface must be supported in all states of the owning object, and must
+ * not change the state of the owning object.
+ */
+interface IConfigurable {
+ /**
+ * Returns the id of the object. This must be unique among all objects of
+ * the same type hosted by the same store.
+ *
+ * @return id Id of the object.
+ */
+ getId() generates (uint32_t id);
+
+ /**
+ * Returns the name of the object.
+ *
+ * This must match the name that was supplied during the creation of the
+ * object.
+ *
+ * @return name Name of the object.
+ */
+ getName() generates (string name);
+
+ /**
+ * Queries a set of parameters from the object.
+ *
+ * Querying is performed at best effort: the object must query all supported
+ * parameters and skip unsupported ones (which may include parameters that
+ * could not be allocated). Any errors are communicated in the return value.
+ *
+ * If @p mayBlock is false, this method must not block. All parameter
+ * queries that require blocking must be skipped.
+ *
+ * If @p mayBlock is true, a query may block, but the whole method call
+ * has to complete in a timely manner, or `status = TIMED_OUT` is returned.
+ *
+ * If @p mayBlock is false, this method must not block. Otherwise, this
+ * method is allowed to block for a certain period of time before completing
+ * the operation. If the operation is not completed in a timely manner,
+ * `status = TIMED_OUT` is returned.
+ *
+ * @note The order of C2Param objects in @p param does not depend on the
+ * order of C2Param structure indices in @p indices.
+ *
+ * \par For IComponent
+ *
+ * When the object type is @ref IComponent, this method must be supported in
+ * any state except released. This call must not change the state nor the
+ * internal configuration of the component.
+ *
+ * The blocking behavior of this method differs among states:
+ * - In the stopped state, this must be non-blocking. @p mayBlock is
+ * ignored. (The method operates as if @p mayBlock was false.)
+ * - In any of the running states, this method may block momentarily if
+ * @p mayBlock is true. However, if the call cannot be completed in a
+ * timely manner, `status = TIMED_OUT` is returned.
+ *
+ * @param indices List of C2Param structure indices to query.
+ * @param mayBlock Whether this call may block or not.
+ * @return status Status of the call, which may be
+ * - `OK` - All parameters could be queried.
+ * - `BAD_INDEX` - All supported parameters could be queried, but some
+ * parameters were not supported.
+ * - `NO_MEMORY` - Could not allocate memory for a supported parameter.
+ * - `BLOCKING` - Querying some parameters requires blocking, but
+ * @p mayBlock is false.
+ * - `TIMED_OUT` - The operation cannot be finished in a timely manner.
+ * - `CORRUPTED` - Some unknown error occurred.
+ * @return params Flattened representation of C2Param objects.
+ *
+ * @sa Params.
+ */
+ query(
+ vec<ParamIndex> indices,
+ bool mayBlock
+ ) generates (
+ Status status,
+ Params params
+ );
+
+ /**
+ * Sets a set of parameters for the object.
+ *
+ * Tuning is performed at best effort: the object must update all supported
+ * configurations at best effort and skip unsupported parameters. Any errors
+ * are communicated in the return value and in @p failures.
+ *
+ * A non-strict parameter update with an unsupported value shall cause an
+ * update to the closest supported value. A strict parameter update with an
+ * unsupported value shall be skipped and a failure shall be returned.
+ *
+ * If @p mayBlock is false, this method must not block. An update that
+ * requires blocking shall be skipped and a failure shall be returned.
+ *
+ * If @p mayBlock is true, an update may block, but the whole method call
+ * has to complete in a timely manner, or `status = TIMED_OUT` is returned.
+ *
+ * The final values for all parameters set are propagated back to the caller
+ * in @p params.
+ *
+ * \par For IComponent
+ *
+ * When the object type is @ref IComponent, this method must be supported in
+ * any state except released.
+ *
+ * The blocking behavior of this method differs among states:
+ * - In the stopped state, this must be non-blocking. @p mayBlock is
+ * ignored. (The method operates as if @p mayBlock was false.)
+ * - In any of the running states, this method may block momentarily if
+ * @p mayBlock is true. However, if the call cannot be completed in a
+ * timely manner, `status = TIMED_OUT` is returned.
+ *
+ * @note Parameter tuning @e does depend on the order of the tuning
+ * parameters, e.g., some parameter update may enable some subsequent
+ * parameter update.
+ *
+ * @param inParams Requested parameter updates.
+ * @param mayBlock Whether this call may block or not.
+ * @return status Status of the call, which may be
+ * - `OK` - All parameters could be updated successfully.
+ * - `BAD_INDEX` - All supported parameters could be updated successfully,
+ * but some parameters were not supported.
+ * - `NO_MEMORY` - Some supported parameters could not be updated
+ * successfully because they contained unsupported values.
+ * These are returned in @p failures.
+ * - `BLOCKING` - Setting some parameters requires blocking, but
+ * @p mayBlock is false.
+ * - `TIMED_OUT` - The operation cannot be finished in a timely manner.
+ * - `CORRUPTED` - Some unknown error occurred.
+ * @return failures List of update failures.
+ * @return outParams Flattened representation of configured parameters. The
+ * order of parameters in @p outParams is based on the order of
+ * requested updates in @p inParams.
+ *
+ * @sa SettingResult.
+ */
+ config(
+ Params inParams,
+ bool mayBlock
+ ) generates (
+ Status status,
+ vec<SettingResult> failures,
+ Params outParams
+ );
+
+ // REFLECTION MECHANISM
+ // =========================================================================
+
+ /**
+ * Returns a list of supported parameters within a selected range of C2Param
+ * structure indices.
+ *
+ * @param start The first index of the selected range.
+ * @param count The length of the selected range.
+ * @return status Status of the call, which may be
+ * - `OK` - The operation completed successfully.
+ * - `NO_MEMORY` - Not enough memory to complete this method.
+ * @return params List of supported parameters in the selected range. This
+ * list may have fewer than @p count elements if some indices in the
+ * range are not supported.
+ *
+ * @sa ParamDescriptor.
+ */
+ querySupportedParams(
+ uint32_t start,
+ uint32_t count
+ ) generates (
+ Status status,
+ vec<ParamDescriptor> params
+ );
+
+ /**
+ * Retrieves the supported values for the queried fields.
+ *
+ * The object must process all fields queried even if some queries fail.
+ *
+ * If @p mayBlock is false, this method must not block. Otherwise, this
+ * method is allowed to block for a certain period of time before completing
+ * the operation. If the operation cannot be completed in a timely manner,
+ * `status = TIMED_OUT` is returned.
+ *
+ * \par For IComponent
+ *
+ * When the object type is @ref IComponent, this method must be supported in
+ * any state except released.
+ *
+ * The blocking behavior of this method differs among states:
+ * - In the stopped state, this must be non-blocking. @p mayBlock is
+ * ignored. (The method operates as if @p mayBlock was false.)
+ * - In any of the running states, this method may block momentarily if
+ * @p mayBlock is true. However, if the call cannot be completed in a
+ * timely manner, `status = TIMED_OUT` is returned.
+ *
+ * @param inFields List of field queries.
+ * @param mayBlock Whether this call may block or not.
+ * @return status Status of the call, which may be
+ * - `OK` - The operation completed successfully.
+ * - `BLOCKING` - Querying some parameters requires blocking, but
+ * @p mayBlock is false.
+ * - `NO_MEMORY` - Not enough memory to complete this method.
+ * - `BAD_INDEX` - At least one field was not recognized as a component
+ * field.
+ * - `BLOCKING` - Querying some fields requires blocking, but @p mayblock
+ * is false.
+ * - `TIMED_OUT` - The operation cannot be finished in a timely manner.
+ * - `CORRUPTED` - Some unknown error occurred.
+ * @return outFields List of supported values and results for the
+ * supplied queries.
+ *
+ * @sa FieldSupportedValuesQuery, FieldSupportedValuesQueryResult.
+ */
+ querySupportedValues(
+ vec<FieldSupportedValuesQuery> inFields,
+ bool mayBlock
+ ) generates (
+ Status status,
+ vec<FieldSupportedValuesQueryResult> outFields
+ );
+
+};
+